THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS Mattel, Inc. All Rights Reserved.
|
|
|
- Gabriel Wilson
- 5 years ago
- Views:
Transcription
1 THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS POWER SWING STUNT SET 8+ Mattel, Inc., El Segundo, CA U.S.A. Consumer Affairs 1 (800) 524-TOYS. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline Mattel Australia Pty., Ltd., Richmond, Victoria Consumer Advisory Service Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.( P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, PJ. Tel: , Fax: B INSTRUCTIONS 2004 Mattel, Inc. All Rights Reserved.
2 Twist off cap and empty contents (4) 90 -Joints (1) Spiral Caddy (1) Lid Connector (22) Clips (3) R-9 (2) (1) R-4 (1) R-6 Clips attach to tracks as shown. Notches on clips align with tabs on tracks to lock in proper position. (1) SC-Exit (1) S-9 Press guardrails into clips until they snap and lock. (1) SC-Entry (1) Swing Rod (1) Small Support (2) Base Supports All track connections lock together with the TECH TRAX system. Be sure tabs insert fully to lock tracks together properly as shown. Track marking system. 1 (1) STO & GO (2) 14" (35.5 cm) Guardrails (2) 20" (51 cm) Guardrails (1) T2P (Adaptor for connecting to other tracks) To unlock tracks, press in on locking tabs and pull apart at the same time as shown. Rod marking system. 2
3 Connected Connected R-9 Use book as tool to measure. Top View SC-Entry 90 Joint R-6 3 (2) Base Supports (2) 90 -Joints (3) R-9 R-9 90 Joint Base Supports Actual Size Actual Size Actual Size 0.5" (1.3 cm) 1.8" (4.6 cm) 0.5" (1.3 cm) SC-Entry R-4 R-6 SC-Exit R-4 SC-Exit 4
4 90 -Joint Connected Connected 90 -Joint Notch ~3.125" (7.9 cm) (2) 90 -Joints Actual Size Actual Size Swing Rod Swing Rod 15 Actual Size ~2.875" (7.3 cm) Actual Size ~1.25" (3.2 cm) ~3.125" (7.9 cm) 6
5 Connected Connected Snap! S-9 Spiral Caddy 7 Spiral Caddy Actual Size ~3.125" (7.9 cm) Actual Size ~3.125" (7.9 cm) You're half way there! S-9 8
6 Connected Side View Lid Connector Connected STO & GO Lid Connector STO & GO
7 Upper Track Clip Locations Upper Track Guardrail Connections 20" (51 cm) Guardrails 20" (51 cm) Guardrails 14" (35.5 cm) Guardrails (22) Clips (2) 14" (35.5 cm) 14" (35.5 cm) Guardrails 11 Lower Track Clip Locations (2) 20" (51 cm) Note: Use of tape (not included) can improve performance and help stabilize the set. Lower Track Guardrail Connections 12
8 14" (35.5 cm) Guardrail 20" (51 cm) Guardrail Congratulations! Your TECH TRAX POWER SWING set is complete. You re a TECH TRAX Master. Now choose your car, and you re ready to test your skill! Sto & Go 1. Press Down to Release. 2. Tilt Down and Lock. CLICK! S-9 Spiral Caddy R-4 R-9 Small Support R-9 Tape Tape 13 Note: Tape (not included) may be used to help stabilize POWER SWING. Tape Swing Rod Tape R-9 Base Support R-6 Now that you re a TECH TRAX master can you also build this set? 14
9 To Lock Spiral Caddy in Center Position Release Car Here Vehicles not included. 1. Pull Forward Top View Flow of Car 15 Top View 2. Back and Lock Car Will Twist Around in Spiral Caddy and Continue Onto Other End of Track 16
10 STO & GO! All the pieces of your track set can be easily stored inside the unique STO & GO package! Where Guardrail ends, be sure to carefully flex the ends outward, so that it won t impede the vehicles movement. The T2P connector can be used as an adaptor for connecting the track pieces of TECH TRAX, to existing Hot Wheels track. To use the 3XL, simply slide it onto one of the Rod pieces. (Note: Be sure the Locking Key is in the open position.) Position along the rod where desired, and then turn the Lock key to secure. To attach the track, take the section where two tracks are joined, and simply slide into the rotating clip unit. G3736 Flex Loop Stunt Set B4687 Trigger Flip Stunt Set B6529 Crash Chamber Stunt Set 17 Place larger items back in canister first. To use the 45/90/T-Joints, simply slide a Rod into the open face of the joint, and then close over the cover element. (Note: Be sure the Joint Key is rotated into its open position.) To lock its position on the rod, rotate the Joint Key 90 degrees. Fine tuning of the set is required to yield optimum performance. By loosening the Locking Key, you can now set the angle of the track as you desire. To remove the track from the Rotating Clip, simply squeeze its ends outward, and pull track out of the groove. AVAILABLE CARS: Each sold separately, subject to availability. Colors and decorations may vary. B4681 Jump Master B4682 Turbo Torque B4683 Power Pivot 18
11 Lid Connector (2) 20" (51 cm) Guardrails THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS R-9 Swing Rod 90 Joint POWER SWING STUNT SET (2) 14" (35.5 cm) Guardrails (2) 20" (51 cm) Guardrails (4) 90 Joints (2) Base Supports (22) Clips (1) Small Support (not used) (1) Lid Connector (1) R-4 (1) R-6 (3) R-9 (2) (1) S-9 (1) SC-Exit (1) Spiral Caddy (1) STO & GO (1) Swing Rod (1) SC-Entry (1) T2P (not used) B S-9 Spiral Caddy 90 Joint R-9 Base Support STO & GO 90 Joint SC-Exit (2) 14" (35.5 cm) Guardrails (22) Clips SC-Entry R-6 Base Support R-9 90 Joint R-4 Vehicles not included. Not for use with some Hot Wheels Vehicles Mattel, Inc. All Rights Reserved. Note: Tape (not included) may be used to help stabilize POWER SWING. Tape
12 THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS TRIGGER FLIP STUNT SET 8+ Mattel, Inc., El Segundo, CA U.S.A. Consumer Affairs 1 (800) 524-TOYS. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline Mattel Australia Pty., Ltd., Richmond, Victoria Consumer Advisory Service Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.( P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, PJ. Tel: , Fax: B INSTRUCTIONS 2004 Mattel, Inc. All Rights Reserved.
13 Twist off cap and empty contents Sleeve (4) Lid Connectors (1) Trigger Flip (1) Landing Pad (1) R-12 (2) R-6 (1) R-9 (2) R-4 Clips attach to tracks as shown. Notches on clips align with tabs on tracks to lock in proper position. (1) Coupler (1) LandingPad Support (2) Press guardrails into clips until they snap and lock. 1 (1) STO & GO (1) 45 Joint (2) 11" (28 cm) Guardrails (2) 24" (61 cm) Guardrails (24) Clips (1) Aux. Base (1) S-6 (1) T2P (Adaptor for connecting to other tracks) All track connections lock together with the TECH TRAX system. Be sure tabs insert fully to lock tracks together properly as shown. To unlock tracks, press in on locking tabs and pull apart at the same time as shown. Track marking system. Rod marking system. 2
14 Center Support Landing Pad Support Connected Side View Pull back ears under platform Connected R-6 Snap! Landing Pad Forward End View Top View Landing Pad Support Aux. Base R-6 Aux. Base Landing Pad 13 Forward 24
15 Connected Connected R-12 R-4 S-6 Coupler Coupler 15 S-6 R-12 R-4 End View 6
16 Connected Trigger Flip Connected Forward Lid Connector Sleeve R-4 Side View Sleeve Lid Connector STO & GO Lid Connector R-4 Lid Connector Trigger Flip 7 8
17 R-9 Connected Connected Lid Connector 45 Joint Insert end of track into silver grove 45 Joint R-9 Lid Connector R-6 Lid Connector R
18 11" (28 cm) Guardrail 24" (61 cm) Guardrail Upper Track Clip Locations Lower Track Clip Locations Upper Track Guardrail Connections 11" (28 cm) Guardrail 24" (61 cm) Guardrail Lower Track Guardrail Connections 24 Clips Landing Pad Clip Locations 24" (61 cm) 11" (28 cm) 11 12
19 Congratulations! Your TECH TRAX TRIGGER FLIP set is complete. You re a TECH TRAX Master." Now choose your TECH TRAX car, and you re ready to test your skill! R-9 Lid Connector R-12 Sto & Go S-6 R-4 Trigger Flip Landing Pad Top View Forward Aux. Base R-4 Now that you re a TECH TRAX master can you also build this set? 13 14
20 1. Press Ramp Down To Lock Trigger. 2. Trigger Locked and Ready to Play. Release Car Here Vehicles not included. Turn Jump Ramp Press Down Move S-6 Track to Top Release Car Here Use book as a tool to measure. Side View Option Play-1 Option Play-2 Note: Jump ramp can be used in both directions to reverse flip Adjust Distance Car Hits Trigger, Launches Toward Landing Pad and Continues Down the Track ~15" ~15" (~38 (~38 cm) cm) Top View
21 17 STO & GO! All the pieces of your track set can be easily stored inside the unique STO & GO package! Place larger items back in canister first: Panel, Trigger Flip, Aux. Base, etc. Squeeze Where Guardrail ends, be sure to carefully flex the ends outward, so that it won t impede the vehicles movement. The T2P connector can be used as an adaptor for connecting the track pieces of TECH TRAX, to existing Hot Wheels track. To use the 45/90/T-Joints, simply slide a Rod into the open face of the joint, and then close over the cover element. (Note: Be sure the Joint Key is rotated into its open position.) To lock its position on the rod, rotate the Joint Key 90 degrees. Fine tuning of the set is required to yield optimum performance. To use the 3XL, simply slide it onto one of the Rod pieces. (Note: Be sure the Locking Key is in the open position.) Position along the rod where desired, and then turn the Lock key to secure. By loosening the Locking Key, you can now set the angle of the track as you desire. To attach the track, take the section where two tracks are joined, and simply slide into the rotating clip unit. To remove the track from the Rotating Clip, simply squeeze its ends outward, and pull track out of the groove. AVAILABLE CARS: Each sold separately, subject to availability. Colors and decorations may vary. G3736 Flex Loop Stunt Set B4681 Jump Master B4686 Power Swing Stunt Set B4682 Turbo Torque B6529 Crash Chamber Stunt Set B4683 Power Pivot 18
22 (2) 11" (28 cm) Guardrails THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS B Lid Connector R-9 45 Joint R-6 Lid Connector Sleeve Trigger Flip Lid Connector TRIGGER FLIP (2) 11" (28 cm) Guardrails (2) 24" (61 cm) Guardrails (1) 45 Joint (1) Aux. Base (24) Clips (1) Coupler STUNT (1) Landing Pad (1) Landing Pad Support (4) Lid Connector (2) R-6 (1) R-9 (1) R-12 (2) R-4 SET (2) (1) S-6 (1) Sleeve (1) STO & GO (1) T2P (not used) R-4 STO & GO Landing Pad Landing Pad Support (2) 24" (61 cm) Guardrails R-12 Coupler R-4 R-6 (24) Clips Lid Connector S-6 Vehicles not included. Not for use with some Hot Wheels Vehicles Mattel, Inc. All Rights Reserved. Aux. Base
23 THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS FLEX LOOP STUNT SET 8+ Mattel, Inc., El Segundo, CA U.S.A. Consumer Affairs 1 (800) 524-TOYS. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline Mattel Australia Pty., Ltd., Richmond, Victoria Consumer Advisory Service Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.( P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, PJ. Tel: , Fax: G INSTRUCTIONS 2004 Mattel, Inc. All Rights Reserved.
24 Twist off cap and empty contents (1) STO & GO (2) Lid Connectors (2) Flex Loop (1) Loop Snap (2) C-2 Launcher (1) (1) R-15 (1) R-6 Clips attach to tracks as shown. Notches on clips align with tabs on tracks to lock in proper position. Press guardrails into clips until they snap and lock. (1) 45 Joint (2) T-Joints (38) Clips (2) S-6 (1) S-9 All track connections lock together with the TECH TRAX system. Be sure tabs insert fully to lock tracks together properly as shown. Track marking system. 1 (2) 20" (50.8 cm) Guardrails (2) 35" (89 cm) Guardrails (2) T2P (Adaptor for connecting to other tracks) To unlock tracks, press in on locking tabs and pull apart at the same time as shown. Rod marking system. 2
25 T-Joint Connected Lid Connector Connected (1) STO & GO 45 Joint STO & GO T-Joint R-15 Use book as a tool to measure. Actual Size Joint R-15 Lid Connector Lid Connector Lid Connector 4.75" (12 cm) Actual Size 1.5" (3.8 cm) 4
26 Connected Connected Snap on top and bottom. SNAP! T-Joint R-6 Loop Support Connect Points 15 R-6 T-Joint Flex Loop Actual Size 1" (2.5 cm) SNAP! 6
27 Connected Connected S-9 7 T2P T2P T2P T2P Track Connectors Connect Points Snap on two T2Ps. S-9 (2) C-2 S-6 C-2 S-6 8
28 Connected Connected S-6 S-6 Launcher Launcher
29 20" (50.8 cm) 20" (50.8 cm) Guardrail Clip Locations Guardrail Locations 20" (50.8 cm) 35" (89 cm) 20" (50.8 cm) Guardrails 35" (89 cm) 35" (89 cm) Guardrails 35" (89 cm) Guardrail 30 Clips (2) 20" (50.8 cm) (2) 35" (89 cm) 11 12
30 Congratulations! Your TECH TRAX FLEX LOOP set is complete. You re a TECH TRAX Master. Now choose your car, and you re ready to test your skill! Flex Loop T-Joint TP2 R-6 Lid Connector Loop Snap R-15 Flex Loop T-Joint TP2 S-6 20" (50.8 cm) Guardrail C-2 C-2 35" (89 cm) Guardrail S-6 Lid Connector 35" (89 cm) Guardrail S-9 Sto & Go Launcher Now that you re a TECH TRAX master can you also build this set? 13 14
31 Bottom View 1. Vehicles not included. 2 Car will climb up the loop and continue on right side track to finish point Pull Trigger Place Car here Pull back cover. 2. Replace rubber band. 1 Press to release car. Launcher has 4 speed levels, to vary the speed of your car around Flex Loop. Vehicles not included
32 STO & GO! All the pieces of your track set can be easily stored inside the unique STO & GO package! Place larger items back in canister first. Where Guardrail ends, be sure to carefully flex the ends outward, so that it won t impede the vehicles movement. The T2P connector can be used as an adaptor for connecting the track pieces of TECH TRAX, to existing Hot Wheels track. To use the 3XL, simply slide it onto one of the Rod pieces. (Note: Be sure the Locking Key is in the open position.) Position along the rod where desired, and then turn the Lock key to secure. By loosening the Locking Key, you can now set the angle of the track as you desire. To attach the track, take the section where two tracks are joined, and simply slide into the rotating clip unit. B4687 Trigger Flip Stunt Set AVAILABLE CARS: B4686 Power Swing Stunt Set B6529 Crash Chamber Stunt Set 17 To use the 45/90/T-Joints, simply slide a Rod into the open face of the joint, and then close over the cover element. (Note: Be sure the Joint Key is rotated into its open position.) To lock its position on the rod, rotate the Joint Key 90 degrees. Fine tuning of the set is required to yield optimum performance. To remove the track from the Rotating Clip, simply squeeze its ends outward, and pull track out of the groove. Each sold separately, subject to availability. Colors and decorations may vary. B4681 Jump Master B4682 Turbo Torque B4683 Power Pivot 18
33 Lid Connector THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS G R-15 T-Joint FLEX LOOP STUNT SET STO & GO (2) 20" (50.8 cm) Guardrails (2) 35" (89 cm) Guardrails (1) 45 Joint (30) Clips (2) C-2 (2) Flex Loop (1) Launcher (2) Lid Connectors (1) R-6 (1) R-15 (1) (1) S-9 (2) S-6 (1) STO & GO (2) T-Joints (2) T2P (1) Loop Snap (not used) 45 Joint T2P S-9 20" (50.8 cm) Guardrail T-Joint R-6 C-2 35" (89 cm) Guardrail Lid Connector 20" (50.8 cm) Guardrail C-2 T2P S-6 Vehicles not included. Not for use with some Hot Wheels Vehicles Mattel, Inc. All Rights Reserved. 35" (89 cm) Guardrail (30) Clips S-6 Launcher
8+ B THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS
THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS AIRSTUNT CHALLENGE STUNT SET Mattel, Inc., El Segundo, CA 90245 U.S.A. Consumer Affairs (800) 524-TOYS.
PILOT'S MANUAL 8+ OUTDOOR USE RECOMMENDED. ADULT ASSEMBLY REQUIRED. CAUTION: Surfaces may become hot and cause burns if electronics get wet.
PILOT'S MANUAL TM 8+ OUTDOOR USE RECOMMENDED. ADULT ASSEMBLY REQUIRED. Keep these instructions for future reference as they contain important information. IMPORTANT: Please read all instructions before
J8999 Instructions.
J8999 Instructions Please keep this instruction sheet for future reference, as it contains important information. Requires three "AA" (LR6) alkaline batteries (not included). Adult assembly is required.
SKY JUMP FINAL ASSEMBLY I C TRACK SET INSTRUCTIONS. Contents
FINL SSEMBLY Contents G eep these instructions for future reference as they contain important information. G H H J 8 S Q2 Q1 E L M R 2 3 F F O M E J 8 4 5 L L 4 I 2 T U 5 1 7 6 R Q2 B Q1 B 1 TRC CONNECTOR
WARNING: MAKE EVEN MORE HOT WHEELS CARS TROUBLESHOOTING TIPS ADVERTISEMENT. CHOKING HAZARD Small parts. Not for children under 3 years.
MAKE EVEN MORE HOT WHEELS CARS ADVERTISEMENT EACH SOLD SEPERATELY, SUBJECT TO AVAILABILITY. COLORS AND DECORATIONS MAY VARY. TROUBLESHOOTING TIPS Mold and syringe do not fit together Ensure the mixer is
Fire Truck. H7323 H7231
TM Fire Truck H7231 H7323 Action Trackers figure sold separately and subject to availability. Please keep this instruction sheet for future reference, as it contains important information. Requires three
C Mile High Mountain
C6994 www.fisher-price.com Mile High Mountain Parts A. Mountain Half (with Tunnel) B. Mountain Half (with Trees) C. Platform with Fence D. Mountain Top E. Chalet F. Snowy Trees G. Plain Trees H. Lower
J8195. PlayPod.
J8195 PlayPod 1 www.fisher-price.com/uk Consumer Information Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries (included). Adult
J6986 WARNING. IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
J6986 WARNING IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fisher-price.com/uk Consumer Information Parts WARNING Prevent serious injury or death: Fall Hazard - It is dangerous to use this reclined
Crawl & Slide Arcade. B2408 Instructions
B2408 Instructions Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
Discovery Village. C4284 Instructions
C4284 Instructions Please keep this instruction sheet for future reference, as it contains important information. Requires three C (LR14) alkaline batteries (not included). Adult assembly is required.
Stand-Up Ball Blast TM
73397 Instructions Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three AA batteries for operation (included). Tool
Product Number: B3001. as it contains important information.
with remote control Product Number: B3001 Please keep this instruction sheet for future reference, as it contains important information. Projector requires four "D" (LR20) alkaline batteries (not included).
Learning Walker. Stride-to-Ride. H6372
H637 Stride-to-Ride Learning Walker Please keep this instruction sheet for future reference, as it contains important information. Maximum weight: 4 lbs. (9 kg). For ages between 9 months and 3 years.
Pop n Twirl Building Table. C3969 Instructions
C3969 Instructions Please keep this instruction sheet for future reference, as it contains important information. Requires three "C" (LR14) alkaline batteries (not included). Adult assembly is required.
Surprise Sounds Fun Park
B6313 Instructions Please keep this instruction sheet for future reference, as it contains important information. Requires three "AA" (LR6) alkaline batteries (not included). Adult assembly is required.
FGF37. Requires three AA (LR6) alkaline batteries (not included) for operation. For longer life, use alkaline batteries.
1,5V x 3 AA (LR6) Keep these instructions Battery installation is required. for future reference as Only adults should install they contain important batteries. Tool required for information. battery installation:
Figures sold separately and subject to availability.
TM Figures sold separately and subject to availability. Instructions: C5959 Please keep this instruction sheet for future reference, as it contains important information. Requires three C (LR14) and three
K4074. Teaching Clock.
K4074 Teaching Clock www.fisher-price.com Ready For More Learning Fun? Look for other great Fun 2 Learn TM toys - each with different skills to practice! Each sold separately and subject to availability.
J6666. CalcuBot.
J6666 CalcuBot www.fisher-price.com Consumer Information Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries (included). Adult assembly
K4074. Teaching Clock.
K4074 Teaching Clock www.fisher-price.com Ready For More Learning Fun? Look for other great Fun 2 Learn TM toys - each with different skills to practice! Each sold separately and subject to availability.
Drop & Roar Dinosaur H
H5924 Drop & Roar Dinosaur Please keep this instruction sheet for future reference, as it contains important information. Requires three "AA" (LR6) alkaline batteries (not included). Adult assembly is
Shake 'n Go Speedway.
www.fisher-price.com H4088 Please keep this instruction sheet for future reference, as it contains important information. Requires ten "AA" (LR6) alkaline batteries (not included). Adult assembly is required.
3D VIEWER. Model H4159
www.fisher-price.com 3D VIEWER In an effort to provide the best products possible, we periodically make product modifi cations. Actual products may not be identical to items pictured. Please keep this
K0400
www.fisher-price.com K0400 Parts A. Main Assembly B. Building Top C. Arch D. Crane E. T-Track F. Straight Track G. Curb H. 4 Building Pieces I. Brick Stack J. Newspaper Stack K. Bus A B C D E F G H x4
Clanky the Garbage Truck. Melody Mini Van. Lifty the Loader
Clanky the Garbage Truck 77606 Melody Mini Van 77607 Lifty the Loader B9169 Each sold separately and subject to availability. Please keep this instruction sheet for future reference, as it contains important
Enchanted Motion Musical Gym
G9158, J6113 Instructions Enchanted Motion Musical Gym Please keep this instruction sheet for future reference, as it contains important information. Requires four C (LR14) alkaline batteries (not included).
Product Numbers: 78558, without training wheels (Helmet, wrist guards and protective pads not included.)
Product Numbers: 78558, 76927 Beginner with training wheels Advanced without training wheels (Helmet, wrist guards and protective pads not included.) Please keep this instruction sheet for future reference,
Motion & Music Barnyard Gym
G4826 Instructions Motion & Music Barnyard Gym Please keep this instruction sheet for future reference, as it contains important information. Requires four AA (LR6) alkaline batteries (not included). Adult
Playful Puppy Gym. H8268 Instructions.
H8268 Instructions Playful Puppy Gym Please keep this instruction sheet for future reference, as it contains important information. Musical panda requires three alkaline (LR44) button cell batteries (included).
M.A.C.C. Mountain Action Command Center
M.A.C.C. Mountain Action Command Center Instructions B2497 Please keep this instruction sheet for future reference, as it contains important information. Requires three C (LR14) alkaline batteries (not
Animal Sounds Farm. Product Number 77746
Animal Sounds Farm Product Number 77746 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three AA (LR6) alkaline batteries
PROJECTOR WITH REMOTE CONTROL
PROJECTOR WITH REMOTE CONTROL Model J7606 Please keep this instruction sheet for future reference, as it contains important information. Requires four AA (LR6) alkaline batteries (not included) and two
Learning Mower K7165.
K7165 Learning Mower Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries (included). Adult assembly is required. Tool required for
Rock, Roll n Ride Deluxe Trike Model Number: B2488
Rock, Roll n Ride Deluxe Trike Model Number: B2488 TM Music and lights respond to baby s rocking motion. Handle helps toddlers roll along. Turn signals flash, music plays when they steer left or right!
Bat & Score Goal K Bat & Play. Play & Score
K0476 Bat & Score Goal Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries (included). Adult assembly is required. Tool required for
Model B1837
www.fisher-price.com Model B1837 Welcome to the Imaginext System The Imaginext system lets your child s imagination come alive. With Quick- panels, kids can build different structures in lots of different
On-the-Go Microphone. J0222 Instructions
J0222 Instructions On-the-Go Microphone Please keep this instruction sheet for future reference, as it contains important information. Requires three AAA (LR03) alkaline batteries (not included). Adult
K7116
www.fisher-price.com K7116 Battery Information 1.5V x 6 AAA (LR03) We recommend the use of alkaline batteries for longer battery life. Battery Installation Vehicle Locate the battery compartment on the
Consumer Information
Action Sounds B A S K E T B A L L Model K912 1 www.fisher-price.com Consumer Information CAUTION This product contains small parts in its unassembled state. Adult assembly is required. Please keep this
G Coastal Winds Airport
G5760 www.fisher-price.com Coastal Winds Airport Parts A. Airplane B. Long Runway C. Short Runway D. Arm E. Control Tower F. Tower Base G. Controller Base H. Crane I. Straight Track J. 2 Flags K. Cargo
Instructions.
J4966 C1159 Instructions Please keep this instruction sheet for future reference,as it contains important information. Requires three AA (LR6) alkaline batteries (not included). Adult assembly is required.
Bounce n Go Coupe. G4815 Instructions. 2 Push n Pedal Car 3 Pedal Car. Stationary Bouncy-Car Action
G485 Instructions www.fisher-price.com Stationary Bouncy-Car Action 2 Push n Pedal Car 3 Pedal Car Please read these instructions carefully and identify all parts before assembly. Refer to the parts and
Fetch the Phonicsbot C2595.
C2595 Fetch the Phonicsbot Please keep this instruction sheet for future reference, as it contains important information. Requires three C (LR14) alkaline batteries (not included). Adult assembly is required
K4562 L1345
K4562 L1345 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three "C" (LR14) alkaline batteries (not included). Tool
Tummy Time. Sit & Play. Lay & Play. L1664
L1664 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three LR44 button cell alkaline batteries (included). Tool required
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
T1838 IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fisher-price.com.au Consumer Information WARNING Prevent serious injury or death from falls or sliding out: Always use the restraint system
Model C5235
www.fisher-price.com Model C5235 Welcome to the Imaginext System Younger children & those new to the Imaginext System Use our step-by-step instructions to build the structure shown on the cover of this
K8378.
K8378 www.fisher-price.com 2 Parts A. Clock Tower Cross Track B. Clock Tower Base C. 2 Arched Overhangs D. 2 Plain Overhangs E. Chimney F. Tower G. Span H. Arch I. Cable Structures J. 4 Bridge Supports
R
R6357 www.fisher-price.com Please keep this instruction sheet for future reference, as it contains important information. Requires six AAA alkaline batteries (not included) and six button cell batteries
CAUTION: Surfaces may become hot and cause burns if
97471-0920 NOT RECOMMENDED CAUTION-ELECTRIC TOY: FOR CHILDREN UNDER 6 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS,PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK. INPUT:
Tough Trike. B8775 Instructions
B8775 Instructions Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and
W3599
www.fisher-price.com W3599 Please keep this instruction sheet for future reference, as it contains important information. Requires two "AAA" batteries (included) for vehicles. Requires six "AAA" (LR03)
V9961 V9961
V9961 www.fisher-price.com Please keep this instruction sheet for future reference, as it contains important information. Adult assembly required. Requires one "AAA" battery (included). Tool required for
Command Center. Model Number Helicopter, Motorcycle, equipment packs and figures sold separately.
Command Center Model Number 72955 Helicopter, Motorcycle, equipment packs and figures sold separately. Please keep these instructions for future reference. Adult assembly is required. Requires three, size
Product features and decoration may vary from the photograph above.
Action Sounds Trike B1480 Instructions Product features and decoration may vary from the photograph above. Please keep this instruction sheet for future reference, as it contains important information.
Motorized Big Top Train
Motorized Big Top Train Model Number 77706 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three AA batteries (included)
Healthy Care High Chair
Healthy Care High Chair Product features and decoration may vary from the photo above. Model Number: 79638, 79639, 79640, 79641, B2875 Please keep this instruction sheet for future reference, as it contains
CFM96. fisher-price.com
CFM96 Keep this instruction sheet for future reference, as it contains important information. Requires four C (LR14) alkaline batteries (not included) for operation. Adult assembly is required. Tool required:
CHG26 IMAGINEXT. Requires four AA (LR6) alkaline batteries (not included) for operation.
1,5V x 4 AA (LR6) Keep this instruction sheet for future reference, as it contains important information. Requires four AA (LR6) alkaline batteries (not included) for operation. Adult assembly is required.
Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries (included) for operation. Adult assembly is required. Tool required for battery
Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries for operation (included).
Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries for operation (included). Adult assembly is required. Tool required for battery
CHG26 IMAGINEXT. Requires four AA (LR6) alkaline batteries (not included) for operation.
1,5V x 4 AA (LR6) Keep this instruction sheet for future reference, as it contains important information. Requires four AA (LR6) alkaline batteries (not included) for operation. Adult assembly is required.
T6339. Remove the mobile from the hub and clip to a stroller for on-the-go entertainment!
T6339 Remove the mobile from the hub and clip to a stroller for on-the-go entertainment! Please keep this instruction sheet for future reference, as it contains important information. Requires four AA
W1392. fisher-price.com
W1392 Please keep this instruction sheet for future reference, as it contains important information. Requires three C batteries (LR14) alkaline batteries (not included) for operation. Adult assembly is
X2916. fisher-price.com WARNING. Overhead Gym. Tummy Time Fun
X2916 Overhead Gym Tummy Time Fun WARNING To prevent entanglement injury, never place gym in a crib or playpen. Never add strings, ties or other products to the gym. Please keep this instruction sheet
T Overhead Gym. Tummy Time Fun. On-the-Go Fun
T6339 Please keep this instruction sheet for future reference, as it contains important information. Requires four AA (LR6) alkaline batteries for operation (not included). Tool required for battery installation:
WARNING. To prevent entanglement injury, never place gym in a crib or playpen. Never add strings, ties or other products to the gym.
X7299 WARNING To prevent entanglement injury, never place gym in a crib or playpen. Never add strings, ties or other products to the gym. Please keep this instruction sheet for future reference, as it
X0056. fisher-price.com
X0056 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three button cell (LR44) alkaline batteries (included). Batteries
DHC26 FDT63. fisher-price.com
DHC26 FDT63 Keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries (included) for operation. Batteries included are for demonstration purposes
FRONT FLIP TAKEDOWN INSTRUCTIONS MORE WAYS TO PLAY TO PLAY: FRONT-FLIP MODE CONTENTS ASSEMBLY (CONTD.) TO PLAY: JUMP MODE APPLY LABELS ASSEMBLY
. SHIFT HANDLE FORWARD AND PREPARE FOR DESTRUC!. CUSTOMIZE YOUR PLAYSET WITH TEAM FLAGS (SOLD SEPARATELY)!. KNOCK DOWN HOUSEHOLD OBSTACLES (NOT INCLUDED)!. SLAM TO LAUNCH! FRONT-FLIP AND DESTROY THE CRUSH
Y9854. fisher-price.com
Y9854 Please keep this instruction sheet for future reference, as it contains important information. Requires two AA (LR6) alkaline batteries for operation (not included). Adult assembly is required. Tool
fisher-price.com BMH49 CHY39 BMD80 Lay & play Take-along
BMH49 CHY39 BMD80 Lay & play Tummy time Sit & play Take-along Keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries (included) for operation.
BFK51 CFD40 CHM41. fisher-price.com
BFK51 CFD40 CHM41 Please keep this instruction sheet for future reference, as it contains important information. Requires three AA (LR6) alkaline batteries (not included). Adult assembly is required. Tool
M5727 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block
X7298. fisher-price.com WARNING
X7298 WARNING To prevent entanglement injury, never place gym in a crib or playpen. Never add strings, ties or other products to the gym. Please keep this instruction sheet for future reference, as it
Assembly. Care. Snap the third wheel into the socket into the back of this toy.
DRN78 Keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. No tools are needed for assembly. Requires four C (LR14) alkaline batteries (included)
User s Manual. Parking Tower VTech Printed in China
User s Manual Parking Tower 2014 VTech Printed in China 91-002904-004 INTRODUCTION Thank you for purchasing the VTech Toot-Toot Drivers Parking Tower learning toy! Park, roll and play with the VTech Toot-Toot
Soothe n Play. Model Number: B0771
Soothe n Play Bouncer Model Number: B0771 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool required for assembly: Phillips
Press the buttons for fun sounds and music! fisher-price.com
K7189 Press the buttons for fun sounds and music! fisher-price.com Please keep these instructions for future reference, as they contain important information. Requires three button cell (LR44) batteries
W
W0275 Actual product may vary from the photos. Please keep this instruction sheet for future reference, as it contains important information. Requires four "AA" (LR6) alkaline batteries (not included)
T
T4262 Please keep this instruction sheet for future reference, as it contains important information. Maximum weight: 44 lbs. (20 kg). For ages between 9 months and 3 years. Requires three AA batteries
TROUBLESHOOTING GUIDE
TROUBLEHOOTING GUIDE If you have questions or difficulty operating your Race et the cause is often a simple problem. nd there s often a simple fix. Usually a quick pit stop will get you racing again. Please
W9740. fisher-price.com. 2 Ride. 1 Sit. 3 Walk
W9740 2 Ride 1 Sit 3 Walk Please keep this instruction sheet for future reference, as it contains important information. For ages 9 36 months and up to 44 lbs (20 kg). Adult supervision is required. Never
W9740. Ride. Sit. Walk. fisher-price.com
W9740 Ride Sit Walk Please keep this instruction sheet for future reference, as it contains important information. For ages 9 36 months and up to 44 lbs (20 kg). Adult supervision is required. Never use
Ultimate Robotic Vehicle
Ultimate Robotic Vehicle URV with Remote Control Figures sold separately. Model Number: 78362 Please keep this instruction sheet for future reference, as it contains important information. Requires four
Ultimate Robotic Vehicle
Ultimate Robotic Vehicle URV with Remote Control Figures sold separately. Model Number: 78362 Please keep this instruction sheet for future reference, as it contains important information. Requires four
User s Manual. 3-in-1 Launch & Play Raceway TM VTech Printed in China
User s Manual 3-in-1 Launch & Play Raceway TM 2014 VTech Printed in China 91-002990-000 INTRODUCTION Thank you for purchasing the VTech Go! Go! Smart Wheels 3-in-1 Launch & Play Raceway TM! Race through
User s Manual. Ultimate Amazement Park Playset TM VTech Printed in China
User s Manual Ultimate Amazement Park Playset TM 2015 VTech Printed in China 91-002921-013 INTRODUCTION Thank you for purchasing the VTech Go! Go! Smart Wheels Ultimate Amazement Park Playset TM learning
Grow With Me RC Rally
Grow With Me RC Rally Model Number 77306 Please keep this instruction sheet for future reference, as it contains important information. Requires four "C" (LR14) alkaline batteries for control tower; four
BFT56 CKB84. fisher-price.com. Keep this instruction sheet for future reference, as it contains important information.
BFT56 CKB84 Keep this instruction sheet for future reference, as it contains important information. Battery installation is required. Only adults should install batteries. Tool required for battery installation:
fisher-price.com W6138
W6138 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block
W4695 Product features and decorations may vary from the photograph. Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools required
Discovery Airport. Model Number 77831
Discovery Airport Model Number 77831 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool required for battery installation: Phillips
M6784 Product features and decoration may vary from the photograph. Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools required
Nursery Rhymes Bus. Instructions. Model Number: 71656
Nursery Rhymes Bus Instructions Model Number: 71656 Please keep these instructions for future reference. Requires three AA (LR6) batteries for operation (included). Tool needed for battery replacement:
Aquarium Bouncer. Model Number: 79030
Aquarium Bouncer Model Number: 79030 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool required for assembly: Phillips screwdriver
Instructions. Model Number: Fun Sounds Garage
Instructions Model Number: 72693 Fun Sounds Garage Please save these instructions for future reference. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver(not included). This product
Trike. Instructions. Model Number: 72633
Trike Model Number: 72633 Instructions Please keep these instructions for future reference. Adult assembly is required. Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood. (Tools
Jungle Pal. Music Mirror Product Number: 73462
L E A R N I Jungle Pal N G P A T T E R N S Music Mirror Product Number: 73462 Please keep this instruction sheet for future reference, as it contains important information. Requires three AA batteries