Air Operated Post Drivers Hydraulic & Manual Post Pullers

Size: px
Start display at page:

Download "Air Operated Post Drivers Hydraulic & Manual Post Pullers"

Transcription

1 Air Operated Post Drivers Hydraulic & Manual Post Pullers Post Drivers and Pullers Will Drive and Pull a Multitude of Posts in Seconds Rhino Transports Serve as Both Transportation and Display and Conveniently Store All Your Rhino Accessories Makes a Difficult Job Easy Minimizes Labor Costs Maximizes Efficiency Makes Money Faster Choose from Seven, Low Cost Rhino Post Drivers and Two, Low Cost Rhino Post Pullers

2 Efficient, Trouble-Free Operation Easily operated by one man, Rhino Post Drivers deliver up to 700 blows per minute. One moving part, a reciprocating piston, strikes directly on the Post or Drive Cap. The Drivers have low air consumption rates, are light-weight and hand portable, ideal for driving in places that are hard to reach. All you need is enough air capacity, the recommended air pressure, a Filter-Regulator-Lubricator to assure clean air, proper pressure, plus ten drops of oil per minute, and your Rhino Post Driver will give you Fast, Low Cost driving. Alloy Steel Pistons and other features insure little or no maintenance. PD-5 PD-55 PD-0 PD-55 drives a ft channel post for a stop sign PD-5 drives ground rod for power poles PD-0 drives a breakaway base for a telespar post PD-9 drives a chain link fence post PD-9 In addition to our full range of products, Rhino Tool Company can custom design and manufacture special tools for uncommon applications. Consult with your Rhino representative for further details on our custom build capabilities.

3 Select the right size for your job. In seconds, you can drive Telespar, Channel Posts, C Posts, Delineator Posts, Pipe, Sand Points, Ground Rods, T Posts, Anchors, Z Posts, Large Tent Pegs, I Posts, W Posts, Concrete Form Pins, Beams, Round, Square or Rectangular Tubing, Wood Posts, Stakes and many other shapes and sizes. Sheet Piling and Guard Rail Posts are driven with special chucks dedicated to specific applications. The lightweight PD-9 is easily operated by one man and is the perfect choice for driving all types of steel fence posts. A PD-9P Panel Post Driver ensures fast erection of temporary panel fencing. Because the PD-9 s are so light in weight, the operator must pull down on the spring loaded handles to provide the correct weight for driving. The standard weight models, the PD-5/PD-55/PD-0/PD- 0/PD-00 are designed to perform driving applications with ease and without assistance. For your convenience, Rhino has developed the PDT line of transports for your standard weight post drivers. These units will transport, organize and display your Rhino post drivers and accessories. Furthermore, they are built to withstand the rigors of the field. Ordering Your Post Driver and Accessories is Easy. First choose the proper size driver for your job. Ask your Rhino dealer, regional representative or the factory for help. Refer to Rhino Tech Data Sheet, Form -, Choosing Your Rhino Post Driver.. Next, select the proper chuck adapter I.D. or shape from Chuck Sizing Tech Data (Form No. -) and order the chuck adapter using its part number.. For Rhino s Warranty to be valid and for safety purposes, each driver must be equipped with a throttle valve kit, a properly set filter-regulator-lubricator and correctly sized chuck adapters. See the accessories section in this brochure. PD-9/Accessories and PD-9P PD PD-9P * 0700* * 6 070* * * Light Weight Medium Duty Post Driver with a 5/8" (9 mm) I.D. Master Chuck, uses CFM (.9 m 90 psi (6. kg/cm ). Approx. Wt. 9.9 lbs (8. kg) Light Weight Medium Duty Panel Post Driver with a /8" (5.98 mm) I.D. Chuck, uses CFM (.9 m 90 psi (6. kg/cm ). Approx. Wt. lbs (8.6 kg) " (76. mm) I.D. PD-9 Chuck Adapter /" (6.5 mm) I.D. PD-9 Chuck Adapter " (50.8 mm) I.D. PD-9 Chuck Adapter PD-9 Channel Post Chuck Adapter - to lbs/ft Posts PD-9 Channel Post Chuck Adapter - to.75 lbs/ft Posts PD-9 Channel Post Chuck Adapter -. to.5 lbs/ft Posts * Chuck adapters only available for the model PD

4 Rhino Air Operated Post Drivers & Accessories PD-5 and Accessories 6 5 PD Light Duty Post Driver with a " (76. mm) I.D. Master Chuck, uses 0 CFM (0.85 m 90 psi (6. kg/cm ). Approx. Wt. 6. lbs ( kg) /" (6.5 mm) I.D. Chuck Adapter " (50.8 mm) I.D. Chuck Adapter /" (8. mm) I.D. Chuck Adapter " (5. mm) I.D. Chuck Adapter Channel Post Chuck Adapter -. to.5 lbs/ft Posts PD-55 and Accessories PD Medium Duty Post Driver with a 7/8" (98. mm) I.D. Master Chuck, uses CFM (.9 m 90 psi (6. kg/cm ). Approx. Wt. 5.6 lbs (.8 kg) /" (88.9 mm) I.D. Chuck Adapter " (76. mm) I.D. Chuck Adapter /" (6.5 mm) I.D. Chuck Adapter " (50.8 mm) I.D. Chuck Adapter /" (8. mm) I.D. Chuck Adapter " (5. mm) I.D. Chuck Adapter Channel Post Chuck Adapter -. to.5 lbs/ft Posts Channel Post Chuck Adapter - to.75 lbs/ft Posts Channel Post Chuck Adapter - to lbs/ft Posts /6" (0. mm) Square Chuck Wood Post Assembly PD-55 " Heavy Chuck Adapter (not shown)

5 PD-0 and Accessories PD Medium/Heavy Duty Post Driver with a /" (07.9 mm) I.D. Master Chuck, uses 6 CFM (.8 m 00 psi (7 kg/cm ). Approx. Wt lbs (9.5 kg) 5/8" (9 mm) I.D. Chuck Adapter " (76. mm) I.D. Chuck Adapter /" (6.5 mm) I.D. Chuck Adapter " (50.8 mm) I.D. Chuck Adapter Channel Post Chuck Adapter -. to.5 lbs/ft Posts Channel Post Chuck Adapter - to.75 lbs/ft Posts Channel Post Chuck Adapter - to lbs/ft Posts PD-0 and Accessories and/ or PD T Heavy Duty Post Driver with a /" (07.9 mm) I.D. Master Chuck, uses 6 CFM (.8 m 00 psi (7 kg/cm ). Approx. Wt. 8.0 lbs (6.8 kg) 5/8" (9 mm) I.D. Chuck Adapter " (76. mm) I.D. Chuck Adapter /" (6.5 mm) I.D. Chuck Adapter Channel Post Chuck Adapter -. to.5 lbs/ft Posts Channel Post Chuck Adapter - to.75 lbs/ft Posts Channel Post Chuck Adapter - to lbs/ft Posts " x 6" (0 mm x 5 mm) H Column Chuck " x 6" (0 mm x 5 mm) H Column Driving Cap " x " (0 mm x 0 mm) Wood Post Chuck PD-0S Heavy Duty Sheet Pile Driver includes Slotted Master Chuck (not shown) PD-0S -/" (0.6 mm) Round Master Chuck Assembly (not shown)

6 More Post Drivers Plus Our Speciality Drive Caps PD-00 and Accessories and/ or PD T Heavy Duty Post Driver with a 5 /" (9.7 mm) I.D. Master Chuck, uses 7 CFM (.0 m 00 psi (7 kg/cm ). Approx.Wt. 00 lbs (90.7 kg) /8" (79. mm) I.D. Chuck Adapter for 5 /" Master Chuck /" (95. mm) I.D. Chuck Adapter for 5 /" Master Chuck /" (07.9 mm) I.D. Chuck Adapter for 5 /" Master Chuck /" (0.7 mm) I.D. Chuck Adapter for 5 /" Master Chuck (not shown) 7" (77.8 mm) I.D. Master Chuck (not shown) /8" (79. mm) I.D. Chuck Adapter for 7" Master Chuck (not shown) /" (95. mm) I.D. Chuck Adapter for 7" Master Chuck (not shown) /" (07.9 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown) /" (0.7 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown) 5 /" (. mm) I.D. Chuck Adapter for 7" Master Chuck (not shown) 5 /" (6. mm) I.D. Chuck Adapter for 7" Master Chuck (not shown) " x 6" (0 mm x 5 mm) H Column Master Chuck " x 6" (0 mm x 5 mm) H Column Drive Cap (not shown) " x " (0 mm x 5 mm) Chuck Adapter 6" x 6" (5 mm x 5 mm) Wood Post Chuck Special Order (not shown - call for quote) PD-00S Heavy Duty Sheet Pile Driver includes Slotted Master Chuck (not shown) PD-00S Slotted Master Chuck

7 Large Diameter -/" (8. mm) " (50.8 mm) Drive Cap Insert Small Diameter Size Height Large Small Diameter Diameter " Drive Cap -/" -/8".0 to.0" 0760 (88.9 mm) (60.5 mm) (50.8 to 50.8 mm) -/" Drive Cap -/" -7/8".5 to." 076 (88.9 mm) (7.05 mm) (76. to mm) " Drive Cap -/" -/".05 to.0" 076 (88.9 mm) (88.9 mm) (77.7 to 77.6 mm) -/" Drive Cap -/" ".5 to.5" 076 (88.9 mm) (0.6 mm) (89.66 to mm) " Drive Cap -/" -/" to.99" 076 (88.9 mm) (. mm) (0.6 to 0.6 mm) 6" Drive Cap 5-/" 6-5/8" 6.0 to (9.7 mm) (68. mm) (57.5 to 56. mm) T-Bar 0765 Clip 0766 Low Drive Extension Description /" Low Drive Extension Drive Cap for Square Breakaway Bases /" Low Drive Extension Drive Cap for Square Breakaway Bases /" Low Drive Extension Drive Cap for Square Breakaway Bases " Low Drive Extension Drive Cap for Square Breakaway Bases /" Low Drive Extension Drive Cap for Square Breakaway Bases /" Low Drive Extension Drive Cap for Square Breakaway Bases 070 PD-55 Chuck Adapter for Square Low Drive Extension (not shown) 0705 PD-0 Chuck Adapter for Square Low Drive Extension (not shown) 0707 PD-0 Chuck Adapter for Square Low Drive Extension (not shown)

8 Transport Kits Serve as Transportation & Display 0 ft of Hose Chuck Adapters Throttle Valve Filter-Regulator- Lubricator Rhino Post Driver Manual Holder Oil

9 PDT-5 and Accessories Rhino PDT-5 Transport Kit includes Transport Accessories as well as: PD-5 Light Duty Post Driver PD-5 -/" (6.5mm) Chuck Adapter PD-5 " (50.8 mm) Chuck Adapter PD-5 " (5. mm) Chuck Adapter PD-5 Channel Post Adapter Throttle Valve Kit with 5 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose PDT-5 Total Solution includes the PDT-5 (075) as well as MP- Post Puller (070) * Note: Chuck adapter selection is customizable. PDT-55 and Accessories PDT-0 and Accessories Rhino PDT-55 Transport Kit includes Transport Accessories as well as: PD-55 Medium Duty Post Driver PD-55 " (76. mm) Chuck Adapter PD-55 -/" (6.5 mm) Chuck Adapter PD-55 " (50.8 mm) Chuck Adapter PD-55 Channel Post Chuck Adapter Throttle Valve Kit with 5 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose PDT-55 Total Solution includes the PDT-55 (076) as well as MP- Post Puller (070) * Note: Chuck adapter selection is customizable PDT-0 and Accessories Rhino PDT-0 Transport Kit includes Transport Accessories as well as: PD-0 Medium/Heavy Duty Post Driver PD-0 " (76. mm) Chuck Adapter PD-0 Channel Post Chuck Adapter Throttle Valve Kit with 5 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose PDT-0 Total Solution includes the PDT-0 (077) as well as MP- Post Puller (070) * Note: Chuck adapter selection is customizable. and/ or Rhino PDT-0 Transport Kit includes Transport Accessories as well as: PD-0 Heavy Duty Post Driver PD-0 " (76. mm) Chuck Adapter PD-0 Channel Post Chuck Adapter Throttle Valve Kit with 5 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose PDT-0 Total Solution includes the PDT-0 (078) as well as MP- Post Puller (070) * Note: Chuck adapter selection is customizable. Please Note: Transport Kits are available as Total Solution Kits. Ask your Rhino Representative for details. Pricing is available for a variety of different PDT packages.

10 The Low Cost Answer for Pulling Posts MP- Manual Post Puller... The MP- weighs only.5 lbs (8.7 kg) and is easily operated by one man. The puller is set with its base next to the post, the handle extended, and the hook removed from its carry position. The chain is placed into the two position chain receiver first notch for speed / second notch for power then hooked to the Post Grabber. The operator attaches the safety restraint to the chain, then pulls the post. 5 After pulling the post, the MP- is returned to its carrying configuration. With the Post Grabber and chain locked in place, the MP- is ready to pull the next post. 5 MP- & Accessories Height Base Handle Weight Dimensions Length Extended MP- " 9-/" x " 60".5 lbs 070*.0 m mm x 0 mm.5 m 8.7 kg Patented 0 Chain Assembly is 5.5" (.5 m) long, /8" (9.5 mm) Grade 80 Alloy Chain with.5 Ton (.7 MT) Grab Hook and Ton (.7 MT) Swivel Hook Weighing 9. lbs (.8 kg) Post Grabber with an Opening of -/8" Wide x -/" Deep ( mm x 6.5 mm) for the Post to be Pulled and a -/" (8. mm) Hook Eye Opening, Weighing.50 lbs (5. kg). 070 Panel Post Grabber for Pulling -5/8" (. mm) Line Posts Between Temporary Fence Panels. Weighing lbs (0.9 kg). *The MP-, 070, includes the Chain Assembly and Post Grabber

11 PL- Hydraulic Post Puller... The hand portable PL- weighs only 5 lbs ( kg) and is easily operated by one man. The puller is positioned with the post between its feet. The hydraulic cylinder is collapsed and the hook removed from its carrying position. A post grabber or a chain is placed around the post and the puller's hook attached to the post grabber. Then the safety restraint is attached to the cable eye above the hook. The hydraulic valve is closed and the operator activates the hydraulic pump producing over tons of pressure to pull the post. In two minutes, a post feet (0.9 m) is pulled. The safety restraint is removed after the post starts moving. 5 After pulling the post, the PL- is returned to carrying configuration. 5 PL- & Accessories Height Width & Hook Cable Pulling Weight Length Opening Stroke PL- 6 /" " x -/" " /8" 9" 5 lbs mm 05 mm x mm 5. mm 9.5 mm 990 mm kg 0700 Post Grabber with an Opening of -/8" Wide x -/" Deep ( mm x 6.5 mm) for the Post to be Pulled and a -/" (8. mm) Hook Eye Opening, Weighing.50 lbs (5. kg).

12 The Full Line of Rhino Accessories PDT-5 Transport Cart Only* 070 PDT-55 Transport Cart Only* 070 PDT-0 Transport Cart Only* 070 PDT-0 Transport Cart Only* *Transport Cart Only Includes: cart, handle, wheels, axle, hardware, brackets for specified tool, as well as the following accessories: oil, hard hat, transport manual, extra bolts and washers " Drive Cap with T-Bar and Clip 076 -/" Drive Cap with T-Bar and Clip 076 " Drive Cap with T-Bar and Clip 076 -/" Drive Cap with T-Bar and Clip 076 " Drive Cap with T-Bar and Clip " Drive Cap 078 PDT-5 Transport Kit without Post Driver 078 PDT-55 Transport Kit without Post Driver 078 PDT-0 Transport Kit without Post Driver 0785 PDT-0 Transport Kit without Post Driver 0799 Hard Hat 0007 Air Hose Reel with 00 ft (0.5 m), /" (9 mm) Air Hose Included 0095 Air Hose Reel Only ft (0.5 m), /" (9 mm) Air Hose Assembly 500 Carrier for Filter-Regulator-Lubricator Throttle Valve Kit with ' (6 cm) Hose Whip (Used with Post Driver models PD-5, PD-55, PD-0, PD-0. & PD-00) /" (9 mm) Hose Assembly (Order Length Needed) 608 Filter-Regulator-Lubricator(Used with all Post Drivers for Operator Safety & Post Driver Protection) Extra /" (9 mm) Air Hose - per foot Air Line Coupler Coupler Safety Clip 6006 Throttle Valve Only w/lever Guard Anti-Vibration Gloves - Small Anti-Vibration Gloves - Medium Anti-Vibration Gloves - Large Anti-Vibration Gloves - XLarge Anti-Vibration Gloves - XXLarge Rhino Tool Company 60 Andrews Ave., PO Box Kewanee, IL 6 Tel: Tel: Fax: Rhino Tool Company has a policy of continuous product improvement and reserves the right to change specifications, designs, or prices at any time without notice or incurring obligations for said changes. and are registered trademarks of Rhino Tool Company. Copyright 00 Rhino Tool Company Printed in U.S.A. Form 88-6/07

Post Drivers and Post Pullers

Post Drivers and Post Pullers Post Drivers and Post Pullers Accessories PDT Transport Kits Perfect for rental stores, the Rhino PDT self-contained units are available in configurations for PD-45, PD-55, PD-110, and PD- 140. Kits include

More information

BREAKERS, TAMPERS & DRIVERS

BREAKERS, TAMPERS & DRIVERS BREAKERS, TAMPERS & DRIVERS Flush face couplers are factory installed. REL-GRD SERIES THE DOOGIE DRIVER GROUND ROD DRIVER The REL-GRD Series Ground Rod Driver from RELIABLE EQUIPMENT has been designed

More information

PD-45/PD-55 PD-45/PD-55 AIR-OPERATED POST DRIVER OWNERS MANUAL AIR-OPERATED POST DRIVER OWNERS MANUAL MODEL: , MODEL: ,

PD-45/PD-55 PD-45/PD-55 AIR-OPERATED POST DRIVER OWNERS MANUAL AIR-OPERATED POST DRIVER OWNERS MANUAL MODEL: , MODEL: , PD-45/PD-55 A TRADITION OF QUALITY AND SERVICE SINCE 1975 AIR-OPERATED POST DRIVER OWNERS MANUAL WWW.RHINOTOOL.COM Form 000302-09/2017 Rhino Tool Company, Inc. P.O. Box 111 Kewanee, IL 61443 309.853.5555

More information

Powered Hoists. Catalog 1150 July Hoists - Powered Phone: Web: hubbellpowersystems.

Powered Hoists. Catalog 1150 July Hoists - Powered Phone: Web: hubbellpowersystems. Powered Hoists Catalog 1150 Page 1151 1,000-lb. & 3,000-lb. Load Ratings 12V, 115V, 230V, Hydraulic, Gasoline Powerful design for tough jobs. Improved design features a multiple-planetary drive/backstop

More information

Distributed by Tri-State Equipment Company Inc

Distributed by Tri-State Equipment Company Inc Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington

More information

Part No. Description Part No. Description

Part No. Description Part No. Description Hand Tool Part No. Description 804-1 Blow Mold Case 804-2 19 1/2 Extension Tube 804-3 16 1/2 Extension Tube 804-4 8 1/2 Extension Tube 804-5 5 Extension Tube 804-6 3 1/4 Extension Tube 804-7 Serrated Saddle

More information

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS HYDRAUL Sykes-Pickavant Loadstar Plus heavy duty pullers are renowned for their durability, immense pulling power and versatile range of kit options. Sykes-Pickavant hydraulic equipment builds upon the

More information

Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX:

Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX: Yale HOISTS! To Avoid Injury: Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Read and follow all instructions. 44 West Broadway Ave. P.O. Box

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications

More information

Slab Riders. Quick-Release Bit Guide ease in changing bits & drill steel

Slab Riders. Quick-Release Bit Guide ease in changing bits & drill steel Slab Riders Quick-Release Bit Guide ease in changing bits & drill steel Oil Injection individual oiling from a single reservoir extends drill life and reduces downtime Hole Spacing Guide ensures quick

More information

STATE OF MINNESOTA PRICING Page % DISCOUNT

STATE OF MINNESOTA PRICING Page % DISCOUNT TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City,

More information

MSC-6KLP Low Profile Mobile Single Column Lift. 6,000 lb. Capacity (1,500 lbs. Max Capacity per Arm) Installation & Operation Manual

MSC-6KLP Low Profile Mobile Single Column Lift. 6,000 lb. Capacity (1,500 lbs. Max Capacity per Arm) Installation & Operation Manual Low Profile Mobile Single Column Lift 6,000 lb. Capacity (1,500 lbs. Max Capacity per Arm) Installation & Operation Manual INDEX PREFACE-------------------------------------------------------------------------------

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications MCH-3S/4S Cutting

More information

Power Units. Leading provider of bolt loading & removal solutions

Power Units. Leading provider of bolt loading & removal solutions Power Units More speed, power and durability Versatile units, power a wide variety of wrenches and tools Every unit tested by FASTORQ technicians Every unit complete with hoses, controllers, quick disconnects

More information

SITE ACCESS EQUIPMENT

SITE ACCESS EQUIPMENT SITE ACCESS EQUIPMENT THE LEADING PRODUCER & DISTRIBUTOR OF TRENCH SHIELDING & SHORING EQUIPMENT SINCE 1995 ROAD PLATES Designed with ease of use in mind, Pro-Tec Equipment s Steel Road Plates include

More information

PNEUMATIC TOGGLE PRESSES

PNEUMATIC TOGGLE PRESSES ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely

More information

MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING

MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING CARE & SAFETY INSTRUCTIONS 114 CX & M3 SERIES CHAIN BLOCKS 115-117 C SERIES CHAIN BLOCKS 118 MINI II CHAIN BLOCKS 118 LX & L5 SERIES CHAIN BLOCKS

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications

More information

August MEMBER. Registered ISO 9001:2008 Registered ISO 14001:2004

August MEMBER. Registered ISO 9001:2008 Registered ISO 14001:2004 August. 2015 Registered ISO 9001:2008 Registered ISO 14001:2004 MEMBER Save your time with high efficiency and performance! Meet your needs from the most complete product line! Worldwide sales and after

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS Floor s and Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 404 3 Ton Ratcheting Stand Set SKU 964601 94 HEIHW93503 Max. Height: 19 Ratchet Action Height

More information

Wagner Die Supply. Diemaking & Diecutting Source and Resource H E N D E R S O N S T O R A G E S Y S T E M S.

Wagner Die Supply. Diemaking & Diecutting Source and Resource H E N D E R S O N S T O R A G E S Y S T E M S. H E N D E R S O N S T O R A G E S Y S T E M S ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL Original Rotary Die Storage Half-Height Unit adds on to Original Unit Rotary cutting dies are stored easily

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS Floor s & Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 324 3 Ton Floor SKU 964623 HEIHW93652 Min. Height: 5 Max. Height: 23-1/2 429 4 Ton Floor SKU

More information

HYDRAULIC TRACK TOOLS

HYDRAULIC TRACK TOOLS HYDRAULIC TRACK TOOLS SERVICE TRAINING INNOVATION POWER UNITS GRINDERS WELD SHEARS RAIL SAWS DRILLS IMPACTS SPIKE PULLERS SPIKE DRIVERS TAMPERS OTHER RAIL PRODUCTS V1.9.13 A m e r i c a n - m a d e t o

More information

Design Based Repair. Fuzion s patent-pending Universal Parts Holding System allows you to hold, section and/or replace parts quickly and easily.

Design Based Repair. Fuzion s patent-pending Universal Parts Holding System allows you to hold, section and/or replace parts quickly and easily. Chief No Need For Multiple Racks, Jigs or Fixtures. Fuzion TM Does It All Because of high-tech composites, designs and on-board systems found on most newer vehicles, many OEM s now have specialized processes

More information

RISE TIME 115/1/60 115/1/60 115/1/60 115/1/60 115/1/60 115/1/60. 1,350 lbs. 1,500 lbs. 1,650 lbs. 1,500 lbs. 1,650 lbs. 1,800 lbs.

RISE TIME 115/1/60 115/1/60 115/1/60 115/1/60 115/1/60 115/1/60. 1,350 lbs. 1,500 lbs. 1,650 lbs. 1,500 lbs. 1,650 lbs. 1,800 lbs. PALLETPAL ROLL-ON For Use with Hand Pallet Trucks With internal hydraulic power, PalletPal Roll-On Level Loaders lower to floor height so pallets can be rolled on and off with a hand pallet truck The lift

More information

FULLY AUTOMATIC SPRING-ACTUATED

FULLY AUTOMATIC SPRING-ACTUATED These are the products that revolutionized manual pallet loading and unloading in North America PalletPal Level Loaders automatically position pallets to the ideal height for manual loading and unloading

More information

hand pumps HAND PUMPS

hand pumps HAND PUMPS HAND PUMPS 30 Introduction Adjustable pivot for the absolute lowest handle effort Pivoting linkage reduces wear for longer pump life Fine threaded, no slip release knob for complete control Large bronze

More information

SHOP MAINTENANCE. Open Throat ALL SHOP PRESSES AVAILABLE IN CE

SHOP MAINTENANCE. Open Throat ALL SHOP PRESSES AVAILABLE IN CE SHOP MAINTENAN 1 2 9 3 4 5 Open Throat 10 11 12 6 8 ALL SHOP PRESSES AVAILABLE IN THE UNIQUE BENEFITS OF THE POWER TEAM PRESS 1 2 TO 1 SAFETY FACTOR on hydraulic cylinders and they meet ASME B30.1 standards.

More information

MADE IN THE USA SINCE product catalog

MADE IN THE USA SINCE product catalog product catalog YOUR IS YOUR REPUTATION. That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what

More information

TRENCH & CLAY DIGGERS

TRENCH & CLAY DIGGERS TRENCH & CLAY DIGGERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1047 Rev A CLAY AND TRENCH DIGGERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir

More information

Fence Pro GAS/PETROL POST DRIVER OWNERS MANUAL MODEL:

Fence Pro GAS/PETROL POST DRIVER OWNERS MANUAL MODEL: Fence Pro GAS/PETROL POST DRIVER OWNERS MANUAL MODEL: 301001 5 3 2 10 9 8 7 6 1 1 11 3 21 20 13 19 18 17 16 15 2 23 22 1 21 12 16 1 300715- Top Handle Bolt (Qty. of ) 2 301222 Top Handle Assembly 3 301221-2

More information

MANUFACTURER S MANUFACTURER, INC.

MANUFACTURER S MANUFACTURER, INC. MADE IN THE USA MANUFACTURER S MANUFACTURER, INC. Manufacturer s Manufacturer, Inc. Lancaster, CA P r o fe s s i o n a l Pa i n t E q u i p m e n t B o d y E q u i p m e n t S t o r a g e S o l u t i o

More information

Courtesy of Crane.Market

Courtesy of Crane.Market CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load

More information

PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE

PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7

More information

HOISTS RATCHET LEVER HOISTS

HOISTS RATCHET LEVER HOISTS Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale

More information

HORIZONTAL SYSTEMS SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY.

HORIZONTAL SYSTEMS SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY. SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY. 90 You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That s why safety

More information

Maasdam The Original. Often Imitated...Never Duplicated

Maasdam The Original. Often Imitated...Never Duplicated Table of Contents......... Cable Pow R Pulls LIFETIME WARRANTY 1 Ton Cable Puller Model #: 144S-6 Weight: 7.63 lbs Cable Length: 12 ft. Cable Lift: 12 ft. Leverage: 15:1 Heavy-Duty Pow R Pulls 3 Ton Cable

More information

PROJECTOR ACCESSORIES

PROJECTOR ACCESSORIES PROJECTOR *To order select accessories in white or silver, simply add a W for white or an S for silver to the end of the part number. CEILING PLATES CMA100 8" (203 mm) CEILING PLATE WITH ADJUSTABLE 1-1/2"

More information

CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7

More information

FIBER OPTIC CABLE BLOWING METHOD

FIBER OPTIC CABLE BLOWING METHOD FIBER OPTIC CABLE BLOWING METHOD An Efficient Method Fiber optic cable blowing is one of the most efficient and safe means of installing fiber optic cable. A pressurized blowing system uses two forces

More information

Whether you want to move grain from the truck or out of the bin, a Brandt GrainBelt can handle the job with ease. Fill quickly and gently to protect

Whether you want to move grain from the truck or out of the bin, a Brandt GrainBelt can handle the job with ease. Fill quickly and gently to protect GrainBelts Whether you want to move grain from the truck or out of the bin, a Brandt GrainBelt can handle the job with ease. Fill quickly and gently to protect your seed investment and grain quality. Harvest

More information

Made in U.S.A. Model 105C. Part Product " spinner Spinner

Made in U.S.A. Model 105C. Part Product  spinner Spinner Surface Spinners Maximize your pressure washers effectiveness! Surface cleaners with Talon Swivel All metal chassis & aluminum deck Trigger gun built into handle 3/8" quick coupler nipple for hose hookup

More information

50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height

50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height 50105R 50105R SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 164'/50 m 360 Degrees 100,000 lbs/45,359 kg 105

More information

Call Toll Free GO ALTEC

Call Toll Free GO ALTEC presents A.B. Chance Call Toll Free 9002-00013 09/05 A. B. CHANCE Company Mechanical Hoists...........................................................p 3 Powered Hoists...........................................................p

More information

Your Best Partner. We do our best to implement our promises, responsibilities and obligations for the satisfaction of our customers.

Your Best Partner. We do our best to implement our promises, responsibilities and obligations for the satisfaction of our customers. March. 2018 Registered ISO 9001:2008 Registered ISO 14001:2004 MEMBER Save your time with high efficiency and performance! Meet your needs from the most complete product line! Worldwide sales and after

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

MILL DUTY. A Complete Line of Heavy Duty Shafts and Shaft-Handling Equipment for Mill Duty Applications MILL DUTY WINDING.

MILL DUTY. A Complete Line of Heavy Duty Shafts and Shaft-Handling Equipment for Mill Duty Applications MILL DUTY WINDING. A Complete Line of Heavy Duty Shafts and Shaft-Handling Equipment for Mill Duty Applications MILL DUTY WINDING Heavy Duty Reel Spool Shafts for Paper Industry Applications Goldenrod field-proven, heavy

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS BIG ROTOR / CALIPER RELOCATION REAR KIT SUM-BK1423 1999-2009 GM 1/2 Ton Trucks & SUVs Thank you for choosing SUMMIT RACING for your braking needs. Pleases take the time to read

More information

MATERIAL HANDLING SOUTHWIRETOOLS.COM

MATERIAL HANDLING SOUTHWIRETOOLS.COM MATERIAL HANDLING 1-855-798-6657 SOUTHWIRETOOLS.COM 2017 Southwire Company, LLC. All rights reserved. Registered Trademark and Trademark of Southwire Company, LLC. PIANO BOXES The Piano Boxes feature shelves,

More information

Concrete Chain Saws CONCRETE CHAIN SAWS. AirFORCE F4. Cut through walls, floors and columns in a single pass. Pneumatic Hydraulic.

Concrete Chain Saws CONCRETE CHAIN SAWS. AirFORCE F4. Cut through walls, floors and columns in a single pass. Pneumatic Hydraulic. Concrete Chain Saws Pneumatic Hydraulic Cut through walls, floors and columns in a single pass CONCRETE CHAIN SAWS Model CS 536163-2 6.5 HP Air Motor Specifically designed for the demanding requirements

More information

Die changing technique

Die changing technique Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers

More information

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re Unbraked Ifor Williams Trailers In safe hands Since 1958, people have put their trust in our trailers, just ask an owner - they re not difficult to find. As specialists in trailer design and engineering,

More information

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re Unbraked Ifor Williams Trailers In safe hands Since 1958, people have put their trust in our trailers, just ask an owner - they re not difficult to find. As specialists in trailer design and engineering,

More information

Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains

Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established

More information

CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Web:

CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc.   Web: CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Email: sales@tsoverheadcrane.com Web: www.tsoverheadcrane.com PH: 314-869-7200 FAX: 314-869-7226 Industry-leading durability,

More information

MDS BARRIER SAFETY SOLUTION

MDS BARRIER SAFETY SOLUTION MDS BARRIER SAFETY SOLUTION Specifications MDSBARRIERS.com info@mdsbarriers.com 1 The market leader MDS TL2 Barriers is a heavy duty traffic/pedestrian separation barrier ideal for use in temporary (short

More information

D-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone:

D-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone: Power Source: Gasoline or Diesel Engine Maximum Gross Spindle Torque: 2320 ft. lbs. (3145 Nm) to 3066 ft. lbs. (4156 Nm) Spindle Bore: 2-3/8 (60mm) Spindle Travel: 66 (1,676mm) Spindle & Retract Force

More information

HEAVY-DUTY IN-GROUND LIFT ECOLIFT The superior flexible solution with a lifting capacity of 30,000 lbs. per scissor and a total of 120,000 lbs.

HEAVY-DUTY IN-GROUND LIFT ECOLIFT The superior flexible solution with a lifting capacity of 30,000 lbs. per scissor and a total of 120,000 lbs. HEAVY-DUTY IN-GROUND LIFT ECOLIFT The superior flexible solution with a lifting capacity of 30,000 lbs. per scissor and a total of 120,000 lbs. STERTIL SUPERIOR SOLUTIONS Superior Solutions The Stertil

More information

Lifting Gear Hire Jacking

Lifting Gear Hire Jacking Lifting Gear Hire Jacking All rental equipment is available throughout North America. For specific product information, refer to the group of equipment within this section s overview on the following page

More information

Whatever the crop and wherever you need to move it, Brandt has an auger that s right for you. Brandt Augers are fast, reliable, and longer lasting to

Whatever the crop and wherever you need to move it, Brandt has an auger that s right for you. Brandt Augers are fast, reliable, and longer lasting to Augers Whatever the crop and wherever you need to move it, Brandt has an auger that s right for you. Brandt Augers are fast, reliable, and longer lasting to get you through harvest worry free. Standard

More information

Or combine the Shop-Hopper and Pit Boss together as a low-cost pulling, sectioning and lifting workstation.

Or combine the Shop-Hopper and Pit Boss together as a low-cost pulling, sectioning and lifting workstation. Just The Lift Your Shop Needs Lots of light pull lifts claim to do it all, but when it comes to backing up those claims, do they deliver the goods? Pit Boss TM is quality engineered with the power, performance

More information

Fast Clip & Traklok Jaw Options (Quick Change Jaws)

Fast Clip & Traklok Jaw Options (Quick Change Jaws) Fast Clip & Traklok Jaw Options (Quick Change Jaws) Fastclip Clip up Jaws (standard on machine) Part No.: 1640146 28kg to 68kg/m Rail Fastclip Unclip jaw Jaws standard with Fastclip head 47-68 kg/m Rail,

More information

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re Unbraked Ifor Williams Trailers In safe hands Since 1958, people have put their trust in our trailers, just ask an owner - they re not difficult to find. As specialists in trailer design and engineering,

More information

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70 Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS BIG ROTOR / CALIPER RELOCATION FRONT KITS SUM-BK1422, BK1423, BK1424 1999-2006 GM 1/2 Ton Trucks & SUVs Thank you for choosing SUMMIT RACING for your braking needs. Pleases take

More information

Walk-In Tool Trailers 16-foot

Walk-In Tool Trailers 16-foot Please complete the data fields on pages 3, 4 and 5. Save the form to your computer and email to: hpsliterature@hubbell.com and 20-foot tandem models Walk-In Tool Trailers 16-foot Standard and Optional

More information

SWIVELWHEEL-58 SWIVELWHEEL-58DW

SWIVELWHEEL-58 SWIVELWHEEL-58DW FAST MASTER PRODUCTS, INC P.O. BOX 654 KATY, TEXAS 77942-0654 TEL: (866) 794-8357 FAX: (281) 391-6760 Email: info@cruiserlift.com SWIVELWHEEL-58 SWIVELWHEEL-58DW SINGLE WHEEL & DUAL SYSTEMS The Swivelwheel-58

More information

Square HeadTM Concrete Vibrators. wycotool.com

Square HeadTM Concrete Vibrators. wycotool.com Square HeadTM Concrete Vibrators TM wycotool.com TM Electric Square Head Concrete Vibrators Performance and Productivity End cap protects switch Heavy-duty protective frame Radial fan - motor runs cooler,

More information

UPTime is the Manitex commitment to complete support of thousands of units working every day.

UPTime is the Manitex commitment to complete support of thousands of units working every day. UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX CM50 1 PC-EN-V1-1113

More information

Demolition of refineries Cutting of Metal and steel structures Cutting steel girders/beams Cutting reinforcements

Demolition of refineries Cutting of Metal and steel structures Cutting steel girders/beams Cutting reinforcements Shears ISS Series Application areas F II III Demolition & renovation Recycling Light Demolition Demolition of non-reinforced concrete structures Composite steel & concrete structure demolition Demolition

More information

Mechanical Hoists. NOTICE: For latest revision of our Catalog and Literature, please visit our web site:

Mechanical Hoists. NOTICE: For latest revision of our Catalog and Literature, please visit our web site: Section 1101 1100 Mechanical Hoists Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be

More information

WORK STATION BRIDGE CRANES

WORK STATION BRIDGE CRANES FREE STANDING WORK STATION BRIDGE CRANES CAPACITIES: SPANS: ENCLOSED TRACKS: PRODUCTIVITY: Up to 4000 lbs Up to 30' Steel, Aluminum & Stainless Steel Average 28% Increase A Class Above... In Productivity.

More information

AIR COMPRESSOR INSTALLED ON CAB & CHASSIS

AIR COMPRESSOR INSTALLED ON CAB & CHASSIS AIR COMPRESSOR INSTALLED ON CAB & CHASSIS VENDOR: Aspen Equipment Company Palfinger PRC60 Total Cost $ - SPEC # DESCRIPTION QTY PRICE SUBTOTAL All Prices are to include installation 1.0 Price for base

More information

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re

In safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re Unbraked Ifor Williams Trailers In safe hands Since 1958, people have put their trust in our trailers, just ask an owner - they re not difficult to find. As specialists in trailer design and engineering,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Disc Brake Spindle Kit SUM-BKA2447 1964-72 A-BODY 1967-69 F-BODY 1968-74 X-BODY Thank you for choosing SUMMIT RACING for your braking needs. Please take the time to read and carefully

More information

5200EX GrainVac 1300HP GrainVac GRAINVACS

5200EX GrainVac 1300HP GrainVac GRAINVACS 5200EX GrainVac 1300HP GrainVac GRAINVACS 2 BRANDT GRAINVACS Technical Specifications GrainVacs 5200 EX 1300 HP Performance Capacity* (bu/hr) 5,200 8,000-8,500 Minimum Tractor Horsepower 70 120 Hydraulic

More information

P Series Puller 1000 and 2000 lb Capacity

P Series Puller 1000 and 2000 lb Capacity P Series Puller 1000 and 2000 lb Capacity Features / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts

More information

PNEUMATIC PIERCING TOOLS HAMMERHEAD MOLE PIERCING TOOLS PARTS & ACCESSORIES CATALOG VOLUME 5

PNEUMATIC PIERCING TOOLS HAMMERHEAD MOLE PIERCING TOOLS PARTS & ACCESSORIES CATALOG VOLUME 5 PNEUMATIC PIERCING TOOLS HAMMERHEAD MOLE PIERCING TOOLS PARTS & ACCESSORIES CATALOG VOLUME 5 Table of Contents HAMMERHEAD MOLE PIERCING TOOLS Reciprocating Head Models (Catamount & Active Head )...4 Non-Reciprocating

More information

Courtesy of Crane.Market

Courtesy of Crane.Market 1039F 1039F SIDE VIEW DIAGRAM Maximum Vertical Reach 49'/15 m Powered Boom Sections Working Area 180 Degrees Standard (360 Optional) Overall Height Lifting Capacity Operator Controls 20,000 lbs/9,072 kg

More information

1560F TECHNICAL SPECIFICATIONS 1560F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 3 Overall Height

1560F TECHNICAL SPECIFICATIONS 1560F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 3 Overall Height 1560F 1560F SIDE VIEW DIAGRAM Maximum Vertical Reach 90'/27,4 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 30,000 lbs/13 608 kg Boom Length 60 /18,3 m Crane Weight (Dry) 14,825 lbs/6725

More information

BUTT-N-TOP GRAPPLE FEATURES & BENEFITS: STANDARD SPECIFICATIONS: OPTIONS: Continued on next page»

BUTT-N-TOP GRAPPLE FEATURES & BENEFITS: STANDARD SPECIFICATIONS: OPTIONS: Continued on next page» BUTT-N-TOP GRAPPLE Weldco-Beales Manufacturing s Butt-n-Top Grapples load, unload, sort, and pile tree length wood with a log loader or standard excavator machine configuration. FEATURES & BENEFITS: Individually

More information

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2

More information

Boat Mold Lift. A custom Pflow Industries Series F material lift,

Boat Mold Lift. A custom Pflow Industries Series F material lift, Boat Mold Lift Custom Pflow lift helps Sea Ray Boats create 9,600 sq ft of storage within existing building at Palm Coast Florida facility Features and Benefits Important component of retrofit design that

More information

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 30105F-D 30105F-D SIDE VIEW DIAGRAM Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard)

More information

Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips

Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips Extra Measure of Reliability Fiberglass Handle and Polyester Webbing Provides added nonconductive material when using proper hot line handling

More information

Mechanical Hoists. Catalog 1100 July Hoists - Mechanical Phone: Web: hubbellpowersystems.

Mechanical Hoists. Catalog 1100 July Hoists - Mechanical Phone: Web: hubbellpowersystems. Mechanical Hoists Catalog 1100 Page 1101 RATCHET HOISTS User-friendly operation and construction. Experienced operators prefer CHANCE lever hoists for longterm, dependable performance. Light-weight for

More information

Rhino HBR 60 Hydraulic Breaker

Rhino HBR 60 Hydraulic Breaker Rhino HBR 60 Hydraulic Breaker Revised 06.14.2016 Prior to Operation We thank you for choosing a Rhino breaker. To ensure smooth operation and long-lasting performance of your new breaker, we recommend

More information

HWP2/HWP3/HWP4 Hydraulic Submersible Pumps

HWP2/HWP3/HWP4 Hydraulic Submersible Pumps HWP2/HWP3/HWP4 Hydraulic Submersible Pumps 2-3 -4 Revised 6/10/2016 Prior to Operation We thank you for choosing a Rhino submersible pump. To ensure smooth operation and long-lasting performance of your

More information

Maasdam The Original. Often Imitated...Never Duplicated

Maasdam The Original. Often Imitated...Never Duplicated Maasdam The Original. Often Imitated...Never Duplicated Table of Contents......... 1-888-797-7855 www.maasdam.com www.pullr.com Maasdam The Original. Often Imitated...Never Duplicated Cable Pow R Pulls

More information

Ultra Tugger Adapter Package for use with Greenlee 640 and 6001

Ultra Tugger Adapter Package for use with Greenlee 640 and 6001 INSTRUCTION MANUAL 1117 Ultra Tugger Adapter Package for use with Greenlee 60 and 6001 Read and understand all of the instructions and safety information in this manual before operating or servicing this

More information

MOBILE FALL PROTECTION EQUIPMENT CATALOGUE

MOBILE FALL PROTECTION EQUIPMENT CATALOGUE MOBILE FALL PROTECTION EQUIPMENT CATALOGUE OVER A DECADE OF FIELD EXPERIENCE HAS TAUGHT US THAT A PERMANENT FALL PROTECTION SYSTEM IS NOT ALWAYS THE BEST CHOICE. sales@shieldfallprotection.com MOBILE FALL

More information

Pneumatic crawler drill

Pneumatic crawler drill 27 / 28 Pneumatic crawler drill CRAWLER ASSEMBLY The crawler uses parts designed and time tested by Furukawa. These include the track-link crawler chains and track rollers. The ruggedly constructed crawler

More information

Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts.

Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts. Arc Welding Equipment Gouging Electrodes Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts. DC Jetrod Copperclad

More information

55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left).

55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left). SUM-BK1624A Full Size GM Installation Instructions Rear Disc Conversion 55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured

More information

PRO-BRACE HYDRAULIC FRAME

PRO-BRACE HYDRAULIC FRAME PRO-BRACE HYDRAULIC FRAME THE LEADING PRODUCER & DISTRIBUTOR OF TRENCH SHIELDING & SHORING EQUIPMENT SINCE 1995 Pro-Tec Equipment Pro-Brace Hydraulic Frame What is the Pro-Brace Hydraulic Frame? The Pro-Brace

More information

Dispense Fluids in A Low Volume, Low Pressure, Precision Spray.

Dispense Fluids in A Low Volume, Low Pressure, Precision Spray. INDUSTRIES, INC. ROCKFORD, IL 61109 Dispense Fluids in A Low Volume, Low Pressure, Precision Spray. Minimize the Over-Spray Minimize the Cleanup in the Work Area Minimize Airborne Droplets of Fluids in

More information

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS 2 BRANDT GRAINBELTS Product: 15 Series Field Grainbelts Models: 1535TDLP, 1545TDLP, 1535LP, 1545LP, 1537LP+, 1547LP+ 15 SERIES

More information

A /F/X Body Instruction Packet Rear Disc Conversion

A /F/X Body Instruction Packet Rear Disc Conversion A /F/X Body Instruction Packet Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes (pictured left). Rotor

More information

TOTAL ATTACHMENTS. A Total Supply Chain Management Company

TOTAL ATTACHMENTS. A Total Supply Chain Management Company TOTAL ATTACHMENTS A Total Supply Chain Management Company TOTAL ATTACHMENTS KTR ATTACHMENTS! KTR Attachments have been developed to meet customer s diverse demand. With high-end manufacturing technology

More information

RAIL MATERIAL HANDLING TONGS RAIL IPS 40 TONGS FROG LIFTING IPS 43

RAIL MATERIAL HANDLING TONGS RAIL IPS 40 TONGS FROG LIFTING IPS 43 INDEX 40 51 TONGS RAIL IPS 40 THREADING TONGS & SPREADER BARS RAIL IPS 42 TONGS FROG LIFTING IPS 43 TONGS SLEEPER/TIMBER IPS 44 PULLER & TUGGER RAIL IPS 45 THREADER BALL & RAIL IPS 46 RUNNER & THREADER

More information