MEDICAL GAS OUTLETS. l DIN l BS 5682:1998 l BS 8532:2011. l SS l AFNOR NF S / FD S l AS 2896 l JIS T 7101

Transcription

1 MEDICL GS OUTLETS l DIN l BS 5682:1998 l BS 8532:2011 l SS l FNOR NF S / FD S l S 2896 l JIS T 7101 l UNI 9507 l ENV l EN l GSS EN ISO l IR MOTOR ENV 737-6

2 MEDICL GS OUTLETS outlets OR range 3 UNI 9507 outlets 13 Probes 15 NIST connectors 18 naesthetic Scavenging System (GSS) and ir Motor 20 ccessories 24 premium

3 outlets OR range The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards so to grant a non-interchangeability among different gases and prevent from any possible mistake. The OR range socket can be fixed to the base block in only one position. The profile of the installed socket is always in the correct position. Base block OR range This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed complying with the standard EN ISO for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. Materials: Brass EN CuZn39Pb3 NBR/EPDM ISI Vertical inlet base block OR range ØB øb ZRMOR-O 18,7 8 ZRMOR-V 18,7 8 Vacuum ZRMOR-4 18,7 8 ir ZRMOR-P 18,7 8 Nitrous oxide ZRMOR-8 18,7 8 ir-800 ZRMOR-C 18,7 8 Carbon dioxide ZRMOR-OP 18,7 8 /Nitrous oxide ZRMOR10-O 18,7 10 ZRMOR10-V 18,7 10 Vacuum ZRMOR ,7 10 ir ZRMOR10-P 18,7 10 Nitrous oxide ZRMOR ,7 10 ir-800 ZRMOR10-C 18,7 10 Carbon dioxide ZRMOR10-OP 18,7 10 /Nitrous oxide c/w plug for test. 45 side inlet base block OR range ØB øb ZRMOR-45-O 18,7 8 ZRMOR-45-V 18,7 8 Vacuum ZRMOR ,7 8 ir ZRMOR-45-P 18,7 8 Nitrous oxide ZRMOR ,7 8 ir-800 ZRMOR-45-C 18,7 8 Carbon dioxide ZRMOR-45-OP 18,7 8 /Nitrous oxide ZRMOR10-45-O 18,7 10 ZRMOR10-45-V 18,7 10 Vacuum ZRMOR ,7 10 ir ZRMOR10-45-P 18,7 10 Nitrous oxide ZRMOR ,7 10 ir-800 ZRMOR10-45-C 18,7 10 Carbon dioxide ZRMOR10-45-OP 18,7 10 /Nitrous oxide c/w plug for test. PRES BLOCK s.p.a. 3 Medical OutletS

4 Vertical inlet base block OR range c/w copper pipe 150 ØB øb ZRMOR-T-O 18,7 8 ZRMOR-T-V 18,7 8 Vacuum ZRMOR-T-4 18,7 8 ir ZRMOR-T-P 18,7 8 Nitrous oxide ZRMOR-T-8 18,7 8 ir-800 ZRMOR-T-C 18,7 8 Carbon dioxide ZRMOR-T-OP 18,7 8 /Nitrous oxide ZRMOR10-T-O 18,7 10 ZRMOR10-T-V 18,7 10 Vacuum ZRMOR10-T-4 18,7 10 ir ZRMOR10-T-P 18,7 10 Nitrous oxide ZRMOR10-T-8 18,7 10 ir-800 ZRMOR10-T-C 18,7 10 Carbon dioxide ZRMOR10-T-N 18,7 10 Nitrogen ZRMOR10-T-OP 18,7 10 /Nitrous oxide c/w plug for test. 45 side inlet base block OR range c/w copper pipe ØB øb ZRMOR-45T-O/1 18,7 8 ZRMOR-45T-V/1 18,7 8 Vacuum ZRMOR-45T-4/1 18,7 8 ir ZRMOR-45T-P/1 18,7 8 Nitrous oxide ZRMOR-45T-8/1 18,7 8 ir-800 ZRMOR-45T-C/1 18,7 8 Carbon dioxide ZRMOR-45T-OP/1 18,7 8 /Nitrous oxide ZRMOR1045T-O/1 18,7 10 ZRMOR1045T-V/1 18,7 10 Vacuum ZRMOR1045T4/1 18,7 10 ir ZRMOR1045T-P/1 18,7 10 Nitrous oxide ZRMOR1045T8/1 18,7 10 ir-800 ZRMOR1045T-C/1 18,7 10 Carbon dioxide ZRMOR1045TOP/1 18,7 10 /Nitrous oxide c/w plug for test. Base block OR range c/w back copper pipe ØB øb ZRMORD-T-O 23,7 8 ZRMORD-T-V 23,7 8 Vacuum ZRMORD-T-4 23,7 8 ir ZRMORD-T-P 23,7 8 Nitrous oxide ZRMORD-T-8 23,7 8 ir-800 ZRMORD-T-C 23,7 8 Carbon dioxide ZRMORD-T-N 23,7 8 Nitrogen c/w plug for test. Base block OR range for flexible hose ØB øb ZRMORD-O-PG6 18,7 6 ZRMORD-V-PG8 18,7 8 Vacuum ZRMORD-4-PG6 18,7 6 ir ZRMORD-P-PG6 18,7 6 Nitrous oxide ZRMORD-8-PG6 18,7 6 ir-800 ZRMORD-C-PG6 18,7 6 Carbon dioxide ZRMORD-N-PG6 18,7 6 Nitrogen c/w plug for test. PRES BLOCK s.p.a. 4 Medical OutletS

5 Base block OR range for flexible hose 69 ØB øb ZRMOR-PG6-O 23,7 6 ZRMOR-PG8-V 23,7 8 Vacuum ZRMOR-PG6-4 23,7 6 ir ZRMOR-PG6-P 23,7 6 Nitrous oxide ZRMOR-PG6-8 23,7 6 ir-800 ZRMOR-PG6-C 23,7 6 Carbon dioxide ZRMOR-PG6-N 23,7 6 Nitrogen c/w plug for test Rotating base block OR range c/w hosetail 34 ØB øb ZRMORG-PG6-O 30 6 ZRMORG-PG8-V 30 8 Vacuum ZRMORG-PG ir ZRMORG-PG6-P 30 6 Nitrous oxide ZRMORG-PG ir-800 ZRMORG-PG6-C 30 6 Carbon dioxide ZRMORG-PG6-N 30 6 Nitrogen c/w plug for test. Base block OR range c/w NIST connector 65 ZRMORD-O-MNIST 23,7 ZRMORD-V-MNIST 23,7 Vacuum ZRMORD-4-MNIST 23,7 ir ZRMORD-P-MNIST 23,7 Nitrous oxide ZRMORD-8-MNIST 23,7 ir-800 ZRMORD-C-MNIST 23,7 Carbon dioxide ZRMORD-N-MNIST 23,7 Nitrogen c/w plug for test. PRES BLOCK s.p.a. 5 Medical OutletS

6 Sockets OR range The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: BS 5682:1998, DIN , NF S , FD S , SS , JIS T 7101, S 2896 and ENV for the dimensions of linking point to the probe; EN ISO for design and manufacture requirements. Materials: Brass EN CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM DIN DIN ORPHEUS 43 Ø 53 VGTDEP-OR-O VGTDEP-OR-V VGTDEP-OR-4 VGTDEP-OR-P VGTDEP-OR-C VGTDEP-OR-N Supplied with releaser sleeve that can be custom made on request. Connecting backside and sleeve made of plastic. Vacuum ir Nitrous oxide Carbon dioxide Nitrogen DIN ORPHEUS Plus 43 VGTDE-OR-O VGTDE-OR-V VGTDE-OR-4 VGTDE-OR-P VGTDE-OR-C VGTDE-OR-N Vacuum ir Nitrous oxide Carbon dioxide Nitrogen Ø 53 Supplied with releaser sleeve that can be custom made on request. Connecting backside made of metal and sleeve of plastic. plus DIN ORPHEUS Premium 43 VGTDEM-OR-O VGTDEM-OR-V VGTDEM-OR-4 VGTDEM-OR-P VGTDEM-OR-C VGTDEM-OR-N Vacuum ir Nitrous oxide Carbon dioxide Nitrogen Ø 53 Supplied with releaser sleeve that can be custom made on request. Connecting backside and sleeve made of metal. premium PRES BLOCK s.p.a. 6 Medical OutletS

7 DIN socket OR range 45 Ø45 VGTDM-OR-O VGTDM-OR-V VGTDM-OR-4 VGTDM-OR-P VGTDM-OR-C VGTDM-OR-N Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide Carbon dioxide Nitrogen DIN horizontal socket OR range 45 VGTDMHO-OR-O VGTDMHO-OR-C VGTDMHO-OR-N Supplied with releaser sleeve that can be custom made on request. Carbon dioxide Nitrogen Ø45 BS 5682:1998 BS 5682:1998 socket OR range 44,5 Ø50 VGTBSM-OR-O VGTBSM-OR-V VGTBSM-OR-4 VGTBSM-OR-P VGTBSM-OR-8 Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 BS 5682:1998 horizontal socket OR range 44,5 VGTBSMHO-OR-O VGTBSMHO-OR-V VGTBSMHO-OR-4 VGTBSMHO-OR-P VGTBSMHO-OR-8 Vacuum ir Nitrous oxide ir-800 Ø50 Supplied with releaser sleeve that can be custom made on request. PRES BLOCK s.p.a. 7 Medical OutletS

8 BS 5682:1998 plastic socket OR range 43 VGTBSP-OR-O VGTBSP-OR-V VGTBSP-OR-4 VGTBSP-OR-P VGTBSP-OR-8 Vacuum ir Nitrous oxide ir-800 Ø50 Supplied with releaser sleeve that can be custom made on request. BS 8532:2011 GSS BS 8532:2011 c/w plastic box Ø 12 VEGS-BS VEGS-BS/1 without box 150 GSS BS 8532:2011 c/w NIST connector VEGS-BS-MNIST NF S and FD S FNOR socket OR range 42 M27x1 VGTFM-OR-O VGTFM-OR-V VGTFM-OR-4 VGTFM-OR-P VGTFM-OR-8 VGTFM-OR-C Vacuum ir Nitrous oxide ir-800 Carbon dioxide PRES BLOCK s.p.a. 8 Medical OutletS

9 Bulkhead nut 3 B Colour PGTF/1 18,7 36,6 grey M27x1 B identification ring B B Disting.colour ZGTF-O white ZGTF-V yellow Vacuum ZGTF black-white ir ZGTF-P blue Nitrous oxide ZGTF white-black ir-800 ZGTF-C grey Carbon dioxide ZGTFD70-O white ZGTFD70-V yellow Vacuum ZGTFD black-white ir ZGTFD70-P blue Nitrous oxide ZGTFD white-black ir-800 ZGTFD70-C grey Carbon dioxide SS SS socket OR range 43 Ø45 VGTM-OR-O VGTM-OR-V VGTM-OR-4 VGTM-OR-P VGTM-OR-8 VGTM-OR-C Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 Carbon dioxide SS horizontal socket OR range 43 Ø45 VGTMHO-OR-O VGTMHO-OR-V VGTMHO-OR-4 VGTMHO-OR-P VGTMHO-OR-8 VGTMHO-OR-C Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 Carbon dioxide PRES BLOCK s.p.a. 9 Medical OutletS

10 ENV ENV socket OR range 52 Ø53 VGTEM-OR-O VGTEM-OR-V VGTEM-OR-4 VGTEM-OR-P VGTEM-OR-8 VGTEM-OR-C Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 Carbon dioxide JIS T 7101 JIS T 7101 socket OR range 45 VGTJSM-OR-O VGTJSM-OR-V VGTJSM-OR-4 VGTJSM-OR-P Vacuum ir Nitrous oxide Ø50 S 2896 S 2896 outlet 150 Ø B Ø50 øb VGTS-O 1/4 VGTS-V 5/16 Vacuum VGTS-4 1/4 ir VGTS-P 1/4 Nitrous oxide VGTS-8 1/4 ir-800 VGTS-C 1/4 Carbon dioxide VGTS-N 1/4 Nitrogen 48 S 2896 outlet c/w NIST connector 200 M22x1,5 VGTS-O-MNIST VGTS-V-MNIST VGTS-4-MNIST VGTS-P-MNIST VGTS-8-MNIST VGTS-C-MNIST VGTS-N-MNIST Vacuum ir Nitrous oxide ir-800 Carbon dioxide Nitrogen Ø PRES BLOCK s.p.a. 10 Medical OutletS

11 S 2896 naesthetic Scavenge Ø B øb VEGS-S 8 50 S 2896 naesthetic Scavenge c/w NIST connector M22x1,5 VEGS-S-MNIST PRES BLOCK s.p.a. 11 Medical OutletS

12 Plastic boxes for terminal units OR Box without lid 99 B 79 B Profile ZBOX-GT-OR 56,8 46,2 suitable for DIN and SS standards ZBOX-GT-OR/01 56,8 52,5 suitable for BS 5682:1998 and JIS T 7101 standards ZBOX-GT-OR/02 58,8 55 suitable for ENV standard and DIN ORPHEUS Suitable to be either flush-mounted or wall-mounted. 19 Box c/w lid for FNOR outlet ZBOXGTF ZBOXGTF/1 c/w locking nut Lid for BHU fnor outlet 65 BOXGTF BOXGTF-1 c/w locking nut PRES BLOCK s.p.a. 12 Medical OutletS

13 UNI 9507 outlets The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards that ensure the accordance to the European directive 93/42/EEC so to grant a non-interchangeability among different gases and prevent from any possible mistake. Base blocks This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed in accordance with the standard EN ISO for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. Materials: Brass EN CuZn39Pb3 NBR/EPDM ISI Base block c/w connector to weld 32 ZRM60-O/PB ZRM60-V/PB ZRM60-4/PB ZRM45-P/PB ZRM60-8/PB ZRM60-C/PB Vacuum ir Nitrous oxide ir-800 Carbon dioxide 8 Hexagonal head plug for base block Ch 7 Disting.colour GT-O/TPP M22x1,5D white GT-V/TPP M24x1,5D yellow Vacuum GT-4/TPP M20x1,5S black ir GT-P/TPP M16x1,5D blue Nitrous oxide GT-8/TPP M18x1,5D black ir-800 GT-C/TPP M20x1,5D grey Carbon dioxide c/w O-ring Ø36 PRES BLOCK s.p.a. 13 Medical OutletS

14 Sockets The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: UNI 9507; EN ISO for design and manufacture requirements. Materials: Brass EN CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM UNI 9507 UNI 9507 socket 5, Disting.colour VGTX60-O M22x1,5D white VGT60-V M24x1,5D yellow Vacuum VGT60-4 M20x1,5S black-white ir VGT45-P M16x1,5D blue Nitrous oxide VGT60-7 M18x1,5D white-black ir-800 VGT60-C M20x1,5D grey Carbon dioxide 7 Ø53 The sleeve can be custom made on request. Plastic boxes Box without lid suitable for UNI 9507 outlets BOX-GT ,5 Suitable to be either flush-mounted or surface-mounted Supplied with: - service cap; - components designed to link the boxes to form a series PRES BLOCK s.p.a. 14 Medical OutletS

15 Probes ll these male connectors to be coupled to the sockets are non-interchangeable and are designed in accordance with the following standards: UNI 9507, NF S , FD S , DIN , BS 5682:1998, SS and ENV for the dimensions of linking point to the socket; EN ISO for design and manufacture requirements. Materials: Brass EN CuZn39Pb3 nickel plated ISI NBR/EPDM PE/POM/BS UNI 9507 Elbow barb end probe Disting.colour H IGTG60-PG6-O white 6 IGTG60-PG8-V yellow 8 Vacuum IGTG60-PG6-4 black-white 6 ir IGTG45-PG6-P blue 6 Nitrous oxide IGTG60-PG6-7 white-black 6 ir-800 IGTG60-PG6-C grey 6 Carbon dioxide Supplied with sticky label that can be custom made on request. H NF S and FD S Straight barb end probe 51 H Disting.colour H IGTF-PG6-O white 6 IGTF-PG8-V yellow 8 Vacuum IGTF-PG6-4 black-white 6 ir IGTF-PG6-P blue 6 Nitrous oxide IGTF-PG6-8 white-black 6 ir-800 IGTF-PG6-C grey 6 Carbon dioxide Supplied with sleeve that can be custom made on request. Elbow barb end probe 48 Disting.colour H IGTGF-PG6-O white 6 IGTGF-PG8-V yellow 8 Vacuum IGTGF-PG6-4 black-white 6 ir IGTGF-PG6-P blue 6 Nitrous oxide IGTGF-PG6-8 white-black 6 ir-800 IGTGF-PG6-C grey 6 Carbon dioxide Supplied with the sleeve that can be custom made on request. H PRES BLOCK s.p.a. 15 Medical OutletS

16 Straight swivel male threaded probe 46 41,5 Ch 20 B B Disting.colour IGTF-OR-M12-O M12x1 white IGTF-OR-M12-V M12x1 yellow Vacuum IGTF-OR-M12-4 M12x1 white-black ir IGTF-OR-M12-P M12x1 blue Nitrous oxide IGTF-OR-M12-C M12x1 grey Carbon dioxide IGTF-OR-M1/8-O 1/8 white IGTF-OR-M1/8-V 1/8 yellow Vacuum IGTF-OR-M1/8-4 1/8 white-black ir IGTF-OR-M1/4-O 1/4 white IGTF-OR-M1/4-V 1/4 yellow Vacuum Supplied with the sleeve that can be custom made on request. DIN Elbow barb end probe Disting.colour H IGTGD-PG6-O white 6 IGTGD-PG8-V yellow 8 Vacuum IGTGD-PG6-4 black-white 6 ir IGTGD-PG6-P blue 6 Nitrous oxide IGTGD-PG6-C grey 6 Carbon dioxide IGTGD-PG6-N black 6 Nitrogen Supplied with sticky label that can be custom made on request. 64 H Elbow barb end probe with check valve Disting.colour H IIGTGD-PG6-O white 6 IIGTGD-PG6-4 black-white 6 ir IIGTGD-PG6-P blue 6 Nitrous oxide IIGTGD-PG6-C grey 6 Carbon dioxide Supplied with sticky label that can be custom made on request. 64 H ENV Elbow barb end probe Disting.colour H IGTGE-PG6-O white 6 IGTGE-PG8-V yellow 8 Vacuum IGTGE-PG6-4 black-white 6 ir IGTGE-PG6-P blue 6 Nitrous oxide IGTGE-PG6-8 white-black 6 ir-800 IGTGE-PG6-C grey 6 Carbon dioxide Supplied with sticky label that can be custom made on request. H PRES BLOCK s.p.a. 16 Medical OutletS

17 BS 5682:1998 Straight barb end probe 66 H H IGTBS-PG6-O 6,5 IGTBS-PG8-V 8 Vacuum IGTBS-PG6-4 6,5 ir IGTBS-PG6-P 6,5 Nitrous oxide IGTBS-PG6-8 6,5 ir-800 Made of nickel plated brass. SS Straight barb end probe H IGT-PG6-O 6 IGT-PG10-V 10 Vacuum IGT-PG8-4 8 ir IGT-PG6-P 6 Nitrous oxide IGT-PG8-8 8 ir-800 IGT-PG6-C 6 Carbon dioxide PRES BLOCK s.p.a. 17 Medical OutletS

18 NIST connectors Range of male and female components intended to maintain gas-specificity by allocation of a set of different diameters and screw thread to mating components to each gas. These connectors are suitable for medical gases when the pressure range is 300 kpa kpa and for vacuum when the pressure range is 10 kpa kpa. These components are designed in accordance with the standard EN Materials: Brass EN CuZn39Pb3 nickel plated NBR/EPDM ISI 1 st fix Nist connector c/w copper pipe welded ,5 Ch 29 M22x1,5 VGTN-PL-O-T1/2 1/2 VGTN-PL-4-T1/2 1/2 ir VGTN-PL-V-T1/2 1/2 Vacuum VGTN-PL-P-T1/2 1/2 Nitrous oxide VGTN-PL-C-T1/2 1/2 Carbon dioxide VGTN-PL-8-T1/2 1/2 ir-800 PL = free flow 1 st fix Nist connector c/w check valve and copper pipe welded 150 Ch M22x1,5 VGTN-O-T10 10 VGTN-4-T10 10 ir VGTN-V-T12 12 Vacuum VGTN-P-T10 10 Nitrous oxide VGTN-C-T10 10 Carbon dioxide VGTN-8-T10 10 ir-800 VGTN-GSS-T15* 15 GSS *No check valve 1 st fix Nist connector c/w hosetail & check valve Ch22 20 M22x1,5 VGTN-O-PG6 6 VGTN-4-PG6 6 ir VGTN-V-PG8 8 Vacuum VGTN-P-PG6 6 Nitrous oxide VGTN-C-PG6 6 Carbon dioxide VGTN-8-PG6 6 ir st fix Nist connector c/w hosetail 21 Ch17 59 M22x1,5 VGTN-PL-O-PG6 6 VGTN-PL-4-PG6 6 ir VGTN-PL-V-PG8 8 Vacuum VGTN-PL-P-PG6 6 Nitrous oxide VGTN-PL-8-PG6 6 ir-800 VGTN-PL-C-PG6 6 Carbon dioxide PL= free flow PRES BLOCK s.p.a. 18 Medical OutletS

19 NIST straight barb end probe M22x1,5 IGTN-PG6-O 6 IGTN-PG8-V 8 Vacuum IGTN-PG6-4 6 ir IGTN-PG6-P 6 Nitrous oxide IGTN-PG6-8 6 ir-800 IGTN-PG6-O 6 ir/ 25 60,5 1 st fix Nist connector c/w M1/4 thread Ch 23 M22x1,5 VGTN-O-M1/4 1/4 VGTN-V-M1/4* 1/4 Vacuum VGTN-4-1/4 1/4 ir * Free flow PRES BLOCK s.p.a. 19 Medical OutletS

20 naesthetic Scavenging System (GSS) and ir Motor They are the part of system to which the operator makes connection and disconnection for exhausting the medical gases coming from anaesthetic and breathing systems. To grant the gas-specifity and prevent any mistake, these terminal units have been designed in accordance to the european standard EN ISO that ensure the conformity to the european directive 93/42/EEC, taken as reference. EN ISO GSS sockets These are the female parts of a terminal unit attached to the base block by a gas-specific interface which contain the gas-specific connection point. Materials: Brass EN CuZn39Pb3 luminium series 2000 or 6000 Steel NBR ISI P/POM GSS type 1L outlet for centralized system Ø12 VEGS120/EN1 Supplied with metal sleeve that can be custom made on request. Disting.colour magenta Ø50 31,5 47,5 GSS type 1L active Ø50 Ø Disting.colour ø øb VEG120/EN1 magenta 10 (supply) 16 (evacuation) Supplied with: - adjusting screw for setting following the standard EN ISO green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB Ø65 PRES BLOCK s.p.a. 20 Medical OutletS

21 GSS type 1L active c/w bulkhead plate Ø50 Ø Disting.colour ø øb VEG120/EN2 magenta 10 (supply) 16 (evacuation) Supplied with: - adjusting screw for setting following the standard EN ISO green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB Ø65 GSS type 1L active for ceiling pendants Ø Ø Disting.colour ø VEG120/EN3 magenta 10 (supply ) Supplied with: - adjusting screw for setting following the standard EN ISO green suction indicator. - sleeve that can be custom made on request. - adapter for connecting the exhaust copper pipe or flexible hose. Ø65 Box for GSS active outlet BOX-GSS Made of aluminium Ø13 60 PRES BLOCK s.p.a. 21 Medical OutletS

22 EN ISO GSS probes These are the male non-interchangeable parts to be connected to the outlets. Materials: luminium series 2000 or 6000 anodized 60 Barb end type 1L Ø G Disting.colour D øg E IEGG120-PG22/EN magenta D E ir Motor ENV This terminal unit integrates a medical tool drive outlet with a gas scavenging terminal unit. Materials: Brass EN CuZn39Pb3 nickel plated Steel NBR nodized luminium ENV outlet for ceiling pendants Ø15 VM737-PG6 Ø9 Ø70 82 Ø64 PRES BLOCK s.p.a. 22 Medical OutletS

23 ENV outlet c/w copper pipes Ø70 Ø ,5 VM737-TL Ø8 Ø15 ENV barb end probe 163 IM737-PG6 Ø PRES BLOCK s.p.a. 23 Medical OutletS

24 ccessories dapters for ambulances Materials: Brass EN CuZn39Pb3 NBR/EPDM ISI BS/POM luminium dapter with one FNOR NF S socket and barb end inlet 24 GTF-1V-PG6-V 6 Vacuum dapter with two FNOR NF S sockets and barb end inlet GTF-2V-PG6-O 6 GTF-2V-PG6-V 6 Vacuum dapter with three FNOR NF S sockets and barb end inlet GTF-3V-PG6-O dapter with four FNOR NF S sockets and barb end inlet GTF-4V-PG6-O PRES BLOCK s.p.a. 24 Medical OutletS

25 dapter with one SS socket and barb end inlet 21 GT-1V-O dapter with two SS sockets and barb end inlet GT-2V-O dapter with two DIN sockets and barb end inlet 68 20,5 GTD-2V-O 6 GTD-2V-4 6 ir 64,5 110 dapter with four DIN sockets and barb end inlet 68 20,5 GTD-4V-O 6 GTD-4V-4 6 ir 64,5 190 PRES BLOCK s.p.a. 25 Medical OutletS

26 Quick couplers for flowmeter and regulator DIN mini socket male threaded Ø 41,5 Ch27 ø VGTD-O-M1/4 1/4 VGTD-4-M1/4 1/4 ir VGTD-V-M1/4 1/4 Vacuum VGTD-P-M1/4 1/4 Nitrous oxide VGTD-C-M1/4 1/4 Carbon dioxide VGTD-O-M3/8 3/ DIN mini socket with barb end 50,5 VGTD-O-PG6 6 VGTD-4-PG6 6 ir Ch 27 SS mini socket male threaded 41 VGT-O-M10X1 M10x1 VGT-4-M10X1 M10x1 ir VGT-P-M10X1 M10x1 Nitrous oxide VGT-C-M10X1 M10x1 Carbon dioxide VGT-O-M1/4 1/4 VGT-4-M1/4 1/4 ir Ch 24 FNOR mini socket male threaded Ø B B ø VGTF-O-M1/4 6,5 1/4 VGTF-4-M1/4 6,5 1/4 ir VGTF-O-M3/8 10 3/8 VGTF-4-M3/8 10 3/8 ir VGTF-V-M3/8 10 3/8 Vacuum Ch23 BS mini socket male threaded L L VGTBS-O-M1/4/V 1/4 60 PRES BLOCK s.p.a. 26 Medical OutletS

27 JIS mini socket male threaded L L VGTJS-O-M1/4 1/4 54,5 S mini socket male threaded L L VGTS-O-M1/4 1/4 47 UNI mini socket male threaded L L VGTI60-O-M1/4 1/4 56 VGTI60-O-M3/8 3/8 41 Flexible hoses for medical gas Flexible hose for EN ISO 5359 assemblies Disting.colour NTPB6x12-O white NTPB8x14-V yellow Vacuum NTPB6x12-4 white-black ir NTPB6x12-P blue Nitrous oxide NTPB6x12-C grey Carbon dioxide NTPB6x12-NC black - 50 meters coil. Without DEHP. PRES BLOCK s.p.a. 27 Medical OutletS

28 plus PBCTGTGB PRES BLOCK S.p.. - Via lpignano, I CSELETTE (TO) Tel (r.a.) - Fax export@presblock.com sales@presblock.com The products described herein, including without limitation, product features, specifications, designs are subject to change by Pres Block at any time without notice.