Wireline coring rods Technical Overview
|
|
- Gerard Lane
- 6 years ago
- Views:
Transcription
1 Wireline coring rods Technical Overview Copyright 2013 Boart Longyear. All Rights Reserved.
2 Copyright 2013 Boart Longyear. All rights reserved. U.S. Patent No. 5,788,401; AU Patent No. 722,567; CA Patent No. 2,216,459. PRODUCTIVITY THROUGH SAFE, RELIABLE AND TRUSTED DESIGN With market-leading thread strength and Boart Longyear's innovative lightweight V-Wall * body option, Boart Longyear s RQ drill rods will expand your drilling capacity while lowering your costs in all ground conditions and drilling applications. Rated for more than 3000 m and field-proven to more than 3800 m, the RQ rod design features a combination of exclusive heat treatments and a patented thread design to provide the ultimate in rod performance and longevity. For more information on coring rods scan with a QR code reader on your smart phone. *Please refer to V-Wall overview on page 6.
3 ROD THREAD OVERVIEW WIRELINE DRILL ROD THREADS Q THREAD - Boart Longyear s original wireline thread - Easy make and break Copyright 2013 Boart Longyear. All rights reserved. RQ THREAD - Patented upgrade over Q thread - Maximum load efficiency - Increased strength and wear life HD THREAD - Large diameter drilling - Robust thread RQ Thread Design Increased joint taper cuts the number of turns during make and break from three to two, easing make-up and reducing thread wear. The reverse angled load flank reverses radial stresses, reducing total stress levels by 20% compared to Q. This increases load efficiency and load capacity. 25% 20% 15% 10% STRESS REDUCTION Coarse RQ threads (three threads per inch) with increased taper, provide easier make and break as well as anti jamming Load efficiency of 50% provides ultimate strength for demanding applications 5% 0% Thread Load Flank Angle Competing deep hole rods Q, HD, and RQ thread designs are proprietary to Boart Longyear. Due to the significant safety risk, Boart Longyear drill rods should never be mixed with other manufacturers rods. Doing so may cause catastrophic equipment failure, leading to bodily injury or death. In addition, mixing rods will void the Boart Longyear warranty. 3
4 Copyright 2013 Boart Longyear. All rights reserved. JOINT Load Efficiency Load Efficiency is the ratio of stress levels induced in the joint as compared to the midbody under a given load. As such, this ratio is a measure of the quality of the engineering design rather than material strength. RQ provides 50% load efficiency versus Q at 30%. JOINT STRENGTH 1 Material at the ends of RQ rods is heat treated to obtain 175% strength increase over the midbody. Joint Load Capacity can be estimated as the midbody strength, times the heat treated material strength increase, times the joint load efficiency. Q 1 Load Efficiency * 30% RQ 50% Joint Material Strength Joint Load Capacity * * Q 140% Q 42% RQ 175% RQ 88% Midbody Bend Strength Significant research and development has resulted in a proven midbody heat treatment process to resist midbody twisting due to helical whirling. Midbody bend strength is evaluated in full-scale four-point bend testing. Drill Rods Drill Rod Bend Strength 100% Q /RQ Drill Rods 200% * Baseline is midbody tubing at 100% 4
5 PERFORMANCE Pin Thread Wear Case Hardened Pin Threads Boart Longyear Patented RQ Thread After 60 make/ break cycles, the case hardened pin thread resists wear. Competing Thread After only 30 make/ break cycles, the non-case-hardened pin thread allows adhesion wear. Significant research and development over many years has resulted in a proven case hardening process which remains unmatched in the marketplace. The pin thread crest is case hardened to eliminate the transfer of wear material between threads. This adhesion wear occurs between threads of equal hardness, leading to galling, loss of thread form, and reduced load capacity. Case hardening maintains thread form and delivers all the benefits of the RQ design. Reverse angled load flank Case hardened pin thread crest Cross section of Case Hardened RQ Pin Thread Box Thread Wear Rated Depth Capacity Boart Longyear Patented RQ Thread After 60 make/ break cycles, the box thread shows minimal abrasion wear. Competing Thread After only 30 make/ break cycles, the box thread shows adhesion wear which leads to galling and seized threads. ARQ TK 1500 m (4,900 ft) BQ 1500 m (4,900 ft) BRQ TK 1500 m (4,900 ft) BRQ 3000 m (9,800 ft) NQ 1500 m (4,900 ft) NQ V-WALL 1680 m (5,500 ft) NRQ 3000 m (9,800 ft) NRQ V-WALL 3300 m (11,000 ft) HQ 1500 m (4,900 ft) HQ V-WALL 1680 m (5,500 ft) HRQ 2500 m (8,200 ft) HRQ V-WALL 3000 m (9,800 ft) PHD 1500 m (4,900 ft) PHD V-WALL 2000 m (6,500 ft) Copyright 2013 Boart Longyear. All rights reserved. AU Patent No. 722,567, ; CA Patent No. 2,216,459. 5
6 V-Wall OVERVIEW V-Wall for Increased Productivity and Reduced Costs With up to 30% less weight in the drill string, productivity will increase while overall operation costs will be reduced. V-Wall Rods will: - Decrease operator fatigue in rod handling increasing safety and productivity. - Decrease fuel costs in rod transportation, and increase the fuel efficiency of each rig on the site. - Increase drill s rated depth capacity. For example, a drill rated to 2500 m HRQ will be able to manage a 3000 m HRQ V-Wall drill string. - Increase midbody flexibility, which is advantageous in wedging or steering applications, but does not reduce drill string stiffness during coring operations. The figure below demonstrates that the helical whirling response to normal drilling loads (pitch of the twisted corkscrew shape of the drill string) is identical for both standard and V-Wall rods. Copyright 2013 Boart Longyear. All rights reserved. AU Patent No ; ZA Patent No. 2009/05921; Patents Pending. Pitch (ft) MIDBODY BENDING STRESS Speed (RPM) Rod ID Standard Wall V-Wall
7 V-Wall for Faster Inner Tube Tripping Annular clearance between the core barrel and the interior wall of the rod is larger which enables faster core barrel descent speeds. When combined with Quick Descent core barrel technology, tripping speed increases up to 50%. Wall Thickness Transition Zone RQ Case Hardened Pin Thread RQ Box Thread Thru-wall Heat Treatment Thru-wall Heat Treatment Light weight for increased depth capacity and reduced operator fatigue V-Wall PULL-BACK ADVANTAGE PHD V-WALL VS. STRAIGHT WALL HRQ V-WALL VS. STRAIGHT WALL NRQ V-WALL VS. STRAIGHT WALL Drill: BLY LF 90D Drill: BLY LF 90D Drill: BLY LF 90D Pullback Rating: 16,000 lbs (7273 KG) Pullback Rating: 16,000 lbs (7273 KG) Pullback Rating: 16,000 lbs (7273 KG) 0m 250 m 500 m PHD STRAIGHT 417 M PHD V-WALL 542 M HQ STRAIGHT 634 M +30% 750 m NQ STRAIGHT 931 M HRQ V-WALL 773 M 1,000 m +22% NRQ V-WALL 1061 M +14% 1250 m Copyright 2013 Boart Longyear. All rights reserved. AU Patent No ; ZA Patent No. 2009/05921; Patents Pending. Q and LF are trademarks of Boart Longyear. Increased inside diameter for faster inner tube tripping Ratings are rig specific. For reference only. 7
8 CORING RODS TECHNICAL INFORMATION ARQTK Performance Rating Rated Drilling Depth by Joint Strength m 4,900 ft Rated Pullback 130 kn 29,250 lbf Rated Torque (Operating or Make-Up) 800 Nm 590 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m 381 Nm 281 ft-lb Recommended Minimum Make-Up Torque 339 Nm 250 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 10,839 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 13,073 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 13,700 psi ARQTK Weights & Measures Rod Midbody Outer Diameter mm 1.76 in Rod Midbody Inner Diameter mm 1.47 in Rod Joint Inner Diameter mm 1.47 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length 3.77 kg/m 2.53 lb/ft Rod Content Weight (Water) per Unit Length 1.09 L/m 0.09 gal/ft Copyright 2013 Boart Longyear. All rights reserved. Q and RQ are trademarks of Boart Longyear BQ Performance Rating Rated Drilling Depth by Joint Strength m 4,900 ft Rated Pullback 130 kn 29,250 lbf Rated Torque (Operating or Make-Up) 800 Nm 590 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m 504 Nm 416 ft-lb Recommended Minimum Make-Up Torque 405 Nm 300 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) MPa 5,729 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) MPa 13,511 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) MPa 14,117 psi BQ Weights & Measures Rod Midbody Outer Diameter 55.9 mm 2.19 in Rod Midbody Inner Diameter 46.1 mm 1.81 in Rod Joint Inner Diameter 46.1 mm 1.81 in Rod Weight per Unit Length 6.25 kg/m 4.20 lb/ft Rod Content Weight (Water) per Unit Length 1.67 L/m 0.13 gal/ft 8
9 BRQTK Performance Rating Rated Drilling Depth by Joint Strength m 4,900 ft Rated Pullback 200 kn 45,000 lbf Rated Torque (Operating or Make-Up) 895 Nm 660 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m 680 Nm 500 ft-lb Recommended Minimum Make-Up Torque 405 Nm 300 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 8,182 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 10,834 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 10,516 psi BRQTK Weights & Measures Rod Midbody Outer Diameter mm 2.20 in Rod Midbody Inner Diameter mm 1.90 in Rod Joint Inner Diameter mm 1.90 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length 4.95 kg/3 m 3.30 lb/10 ft Rod Content Weight (Water) per Unit Length 1.83 L/m 0.15 gal/ft BRQ Performance Rating Rated Drilling Depth by Joint Strength m 9,800 ft Rated Pullback 250 kn 56,250 lbf Rated Torque (Operating or Make-Up) Nm 1,100 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m 950 Nm 750 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 1000m 680 Nm 500 ft-lb Recommended Minimum Make-Up Torque 405 Nm 300 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) MPa 8,891 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) MPa 13,511 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) MPa 14,117 psi BRQ Weights & Measures Rod Midbody Outer Diameter 55.9 mm 2.19 in Rod Midbody Inner Diameter 46.1 mm 1.81 in Rod Joint Inner Diameter 46.1 mm 1.81 in Rod Weight per Unit Length 6.25 kg/m 4.20 lb/ft Rod Content Weight (Water) per Unit Length 1.67 L/m 0.13 gal/ft Copyright 2013 Boart Longyear. All rights reserved. RQ is a trademark of Boart Longyear. NOTE: All rod capacities and failure loads were determined through simultaneous torque and tension load testing by an independent party. An appropriate safety factor has been applied in determining the ratings above. These ratings apply to new, unused rods of Boart Longyear manufacture, in a straight vertical down hole, assuming compliance to Boart Longyear Care and Handling or Product Literature and standard core drilling practices. Actual performance may vary depending on operating conditions and drilling practices. Actual Burst and collapse pressure ratings will be reduced under drilling loads. Increase make-up torque to match operating torque in deep downholes. Operating torque should not exceed make-up torque. 9
10 CORING RODS TECHNICAL INFORMATION NQ Performance Rating Rated Drilling Depth by Joint Strength m 4,900 ft Rated Pullback 200 kn 45,000 lbf Rated Torque (Operating or Make-Up) Nm 900 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m Recommended Minimum Make-Up Torque 600 Nm 442 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 4,452 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 10,952 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 10,724 psi NQ Weights & Measures Rod Midbody Outer Diameter mm 2.75 in Rod Midbody Inner Diameter mm 2.38 in Rod Joint Inner Diameter mm 2.38 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length 7.79 kg/m 5.23 lb/ft Rod Content Weight (Water) per Unit Length 2.86 L/m 0.23 gal/ft Copyright 2013 Boart Longyear. All rights reserved. Q and V-Wall are trademarks of Boart Longyear. NQ V-Wall Performance Rating Rated Drilling Depth by Joint Strength m 6,500 ft Rated Pullback 200 kn 45,000 lbf Rated Torque (Operating or Make-Up) Nm 900 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m Nm 750 ft-lb Recommended Minimum Make-Up Torque 600 Nm 452 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 4,542 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 9,193 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 7,603 psi NQ V-Wall Weights & Measures Rod Midbody Outer Diameter 69.9 mm 2.75 in Rod Midbody Inner Diameter 62.0 mm 2.44 in Rod Joint Inner Diameter 60.3 mm 2.38 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length kg/3 m 45.0 lb/10 ft Rod Content Weight (Water) per Unit Length 2.97 L/m 0.24 gal/ft 10
11 NRQ Performance Rating Rated Drilling Depth by Joint Strength m 9,800 ft Rated Pullback 330 kn 74,255 lbf Rated Torque (Operating or Make-Up) Nm 1,750 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000 m Nm 1,000 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 1000 m Nm 750 ft-lb Recommended Minimum Make-Up Torque 600 Nm 452 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 7,215 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 10,952 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 10,724 psi NRQ Weights & Measures Rod Midbody Outer Diameter mm 2.75 in Rod Midbody Inner Diameter mm 2.37 in Rod Joint Inner Diameter mm 2.38 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length 7.79 kg/m 5.23 lb/ft Rod Content Weight (Water) per Unit Length 2.86 L/m 0.23 gal/ft NRQ V-Wall Performance Rating Rated Drilling Depth by Joint Strength m 10,800 ft Rated Pullback 330 kn 74,255 lbf Rated Torque (Operating or Make-Up) Nm 1,750 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Nm 1,000 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 1000m Nm 750 ft-lb Recommended Minimum Make-Up Torque 600 Nm 452 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 7,215 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 9,193 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 7,603 psi NRQ V-Wall Weights & Measures Rod Midbody Outer Diameter mm 2.75 in Rod Midbody Inner Diameter mm 2.44 in Rod Joint Inner Diameter mm 2.38 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length kg/3 m 45.0 lb/10 ft Rod Content Weight (Water) per Unit Length 2.97 L/m 0.24 gal/ft Copyright 2013 Boart Longyear. All rights reserved. RQ and V-Wall are trademarks of Boart Longyear. NOTE: All rod capacities and failure loads were determined through simultaneous torque and tension load testing by an independent party. An appropriate safety factor has been applied in determining the ratings above. These ratings apply to new, unused rods of Boart Longyear manufacture, in a straight vertical down hole, assuming compliance to Boart Longyear Care and Handling or Product Literature and standard core drilling practices. Actual performance may vary depending on operating conditions and drilling practices. Actual Burst and collapse pressure ratings will be reduced under drilling loads. Increase make-up torque to match operating torque in deep downholes. Operating torque should not exceed make-up torque. 11
12 CORING RODS TECHNICAL INFORMATION HQ Performance Rating Rated Drilling Depth by Joint Strength m 4,900 ft Rated Pullback 250 kn 56,250 lbf Rated Torque (Operating or Make-Up) Nm 1,500 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m Nm 900 ft-lb Recommended Minimum Make-Up Torque Nm 750 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 4,365 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 9,850 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 8,770 psi HQ Weights & Measures Rod Midbody Outer Diameter mm 3.50 in Rod Midbody Inner Diameter 77.8 mm 3.06 in Rod Joint Inner Diameter 77.8 mm 3.06 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length kg/m 7.7 lb/ft Rod Content Weight (Water) per Unit Length 4.8 L/m 0.38 gal/ft Copyright 2013 Boart Longyear. All rights reserved. Q and V-Wall are trademarks of Boart Longyear. HQ V-Wall Performance Rating Rated Drilling Depth by Joint Strength m 5,500 ft Rated Pullback 250 kn 56,250 lbf Rated Torque (Operating or Make-Up) Nm 1,500 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m Nm 900 ft-lb Recommended Minimum Make-Up Torque Nm 750 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 4,365 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 7,280 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 4,206 psi HQ V-Wall Weights & Measures Rod Midbody Outer Diameter 88.9 mm 3.50 in Rod Midbody Inner Diameter 81.0 mm 3.19 in Rod Joint Inner Diameter 77.8 mm 3.06 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length 27.3 kg/3 m 60.0 lb/10 ft Rod Content Weight (Water) per Unit Length 5.14 L/m 0.40 gal/ft 12
13 HRQ Performance Rating Rated Drilling Depth by Joint Strength m 8,200 ft Rated Pullback 510 kn 115,000 lbf Rated Torque (Operating or Make-Up) Nm 2,600 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000 m Nm 2,000 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 1000 m Nm 1,500 ft-lb Recommended Minimum Make-Up Torque Nm 750 ft lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 6,458 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 9,850 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 8,770 psi HRQ Weights & Measures Rod Midbody Outer Diameter 88.9 mm 3.50 in Rod Midbody Inner Diameter 77.9 mm 3.06 in Rod Joint Inner Diameter 77.9 mm 3.06 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length kg/m 7.7 lb/ft Rod Content Weight (Water) per Unit Length 4.8 L/m 0.40 gal/ft HRQ V-Wall Performance Rating Rated Drilling Depth by Joint Strength m 10,000 ft Rated Pullback 510 kn 115,000 lbf Rated Torque (Operating or Make-Up) Nm 2,600 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Nm 2,000 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 1000m Nm 1,500 ft-lb Recommended Minimum Make-Up Torque Nm 750 ft-lb API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 6,458 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 7,280 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 4,206 psi HRQ V-Wall Weights & Measures Rod Midbody Outer Diameter mm 3.50 in Rod Midbody Inner Diameter mm 3.19 in Rod Joint Inner Diameter mm 3.06 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length 27.3 kg/3 m 60.0 lb/10 ft Rod Content Weight (Water) per Unit Length 5.14 L/m 0.40 gal/ft Copyright 2013 Boart Longyear. All rights reserved. RQ and V-Wall are trademarks of Boart Longyear. NOTE: All rod capacities and failure loads were determined through simultaneous torque and tension load testing by an independent party. An appropriate safety factor has been applied in determining the ratings above. These ratings apply to new, unused rods of Boart Longyear manufacture, in a straight vertical down hole, assuming compliance to Boart Longyear Care and Handling or Product Literature and standard core drilling practices. Actual performance may vary depending on operating conditions and drilling practices. Actual Burst and collapse pressure ratings will be reduced under drilling loads. Increase make-up torque to match operating torque in deep downholes. Operating torque should not exceed make-up torque. 13
14 CORING RODS TECHNICAL INFORMATION PHD Performance Rating Rated Drilling Depth by Joint Strength m 4,900 ft Rated Pullback 450 kn 100,000 lbf Rated Torque (Operating or Make-Up) Nm 3,000 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m Recommended Minimum Make-Up Torque API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 3,135 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 8,998 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 7,255 psi PHD Weights & Measures Rod Midbody Outer Diameter mm 4.50 in Rod Midbody Inner Diameter mm 4.0 in Rod Joint Inner Diameter mm 4.0 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length kg/m lb/ft Rod Content Weight (Water) per Unit Length 8.14 L/m 0.65 gal/ft Copyright 2013 Boart Longyear. All rights reserved. V-Wall is a trademark of Boart Longyear. PHD V-Wall Performance Rating Rated Drilling Depth by Joint Strength m 6,500 ft Rated Pullback 450 kn 100,000 lbf Rated Torque (Operating or Make-Up) Nm 3,000 ft-lb Recommended Minimum Make-Up Torque for Deep Holes over 2000m Recommended Minimum Make-Up Torque for Deep Holes over 1000m Recommended Minimum Make-Up Torque API Theoretical Burst Pressure at Box Shoulder (per API bulletin 5C3) kpa 3,145 psi API Theoretical Burst Pressure at Midbody (per API bulletin 5C3) kpa 5,634 psi API Theoretical Collapse Pressure at Midbody (per API bulletin 5C3) kpa 2,299 psi PHD V-Wall Weights & Measures Rod Midbody Outer Diameter mm 4.50 in Rod Midbody Inner Diameter mm 4.19 in Rod Joint Inner Diameter mm 4.0 in Rod Stiffness (Moment of Inertia) mm in 4 Rod Weight per Unit Length kg/3 m lb/10 ft Rod Content Weight (Water) per Unit Length 8.80 L/m 0.70 gal/ft 14
15 NOTES 15
16 Global Headquarters Boart Longyear South River Front Parkway Suite 600 South Jordan, Utah United States of America Tel: Fax: Latin America Boart Longyear Portal Riesco Av. El Salto 4001, Huechuraba Santiago, Chile Tel: Fax: Canada Boart Longyear 2442 South Sheridan Way Mississauga, Ontario Canada L5J 2M7 info@boartlongyear.com Tel: Fax: Europe Boart Longyear 12 Avenue des Morgines CH1213 Petit-Lancy, Geneva, Switzerland infoeu@boartlongyear.com Tel: Fax: Asia Pacific Boart Longyear 26 Butler Boulevard Adelaide, 5950 Australia infoap@boartlongyear.com Tel: Fax: MINING AND EXPLORATION DRILLING PRODUCTS Copyright 2013 Boart Longyear. All rights reserved. Diamond Products Genuine Q Wireline Tooling Rods and Casing ASX: BLY Jan 2013
Copyright 2012 Boart Longyear. All Rights Reserved. LX 11 MULTIPURPOSE DRILL. Technical Overview
Copyright 2012 Boart Longyear. All Rights Reserved. LX 11 MULTIPURPOSE DRILL Technical Overview 1 LX 11 Copyright 2012 Boart Longyear. All Rights Reserved. The LX11 is a powerful medium-sized exploration
More informationLF 90D Surface coring drill. Technical Overview
LF 90D Surface coring drill Technical Overview LF 90D SURFACE CORING DRILL Copyright 2013 Boart Longyear. All rights reserved. Mobility Engineered for mobility, the LF 90D surface coring drill features
More informationLM 30SS - UNDERGROUND CORE DRILL. Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.
LM 30SS - UNDERGROUND CORE DRILL Technical Overview Copyright 2011 Boart Longyear. All rights reserved. LM 30SS (SKID STEER) - UNDERGROUND CORE DRILL The LM30SS (Skid Steer) drill is a mobile underground
More informationLX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.
LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview LX 4 GEO-TECHNICAL DRILL HIGH DRILLING POWER IN A SMALL PACKAGE, THE MULTIPURPOSE LX 4 IS AN ESSENTIAL TOOL ON TODAY'S JOB SITE Power and Versatility
More informationCopyright 2017 Boart Longyear. All Rights Reserved. 350E DRILL RIG AND FREEDOM TM LF TM LOADER V5 6/28/17
LF TM 350E DRILL RIG AND FREEDOM TM LOADER V5 6/28/17 1 LF TM350E DRILL RIG Boart Longyear has combined proven technology from its most popular surface coring drill rigs to create the powerful LF TM 350e.
More informationS250 ROCK DRILL Rock Drill & Blast Equipment and Technical Overview
S250 ROCK DRILL Rock Drill & Blast Equipment and Technical Overview Copyright 2012. All rights reserved Copyright 2012. All rights reserved. S250 rock drill continues on its long history of providing premium
More informationCopyright 2013 Boart Longyear. All Rights Reserved. DCi Drill Control Interface. Technical Overview
DCi Drill Control Interface Technical Overview 1 DCi Drill Control Interface The DCi is a new control system designed to increase the efficiency, productivity and safety of the LM series of drilling rigs
More informationSTOPEMASTER SERIES HX Rock Drill and Blast Rig Technical Overview
STOPEMASTER SERIES HX Rock Drill and Blast Rig Technical Overview For more information on the Stopemaster scan with a QR code reader on your smart phone. PRODUCTIVITY THROUGH SAFE, RELIABLE AND TRUSTED
More informationSTOPEMATE ROCK DRILL Rock Drill and Blast Rig Technical Overview
Copyright 2011. All rights reserved. STOPEMATE ROCK DRILL Rock Drill and Blast Rig Technical Overview Copyright 2011. All rights reserved. STOPEMATE The StopeMate TM Production Drill is unique by design
More informationSTOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview
STOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview Copyright 2011. All rights reserved. Copyright 2011. All rights reserved. For more information on the Stopemaster scan with a QR code reader
More informationDB540 MULTIPURPOSE DRILL. Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.
DB540 MULTIPURPOSE DRILL Technical Overview DB540 MULTIPURPOSE DRILL HIGH DRILLING POWER IN A VERSATILE TRACK BASED FORMAT, THE MULTIPURPOSE DB540 IS AN ESSENTIAL TOOL ON TODAY S JOB SITE. Power and Versatility
More informationLM 75 UNDERGROUND CORING DRILL. Technical Overview. Copyright 2018 Boart Longyear. All rights reserved.
LM 75 UNDERGROUND CORING DRILL Technical Overview Copyright 2018 Boart Longyear. All rights reserved. Copyright 2018 Boart Longyear. All rights reserved. "Q" is a trademark of Boart Longyear LM 75 UNDERGROUND
More informationMDR700 UNDERGROUND CORING MOBILE DRILL RIG
MDR700 UNDERGROUND CORING MOBILE DRILL RIG V3 l 4/28/2017 MDR700 UNDERGROUND CORING MOBILE DRILL RIG The MDR700 underground coring mobile drill rig is a powerful rig that utilizes proven Boart Longyear
More informationLM30 Drill Series TECH DATA
DRILLING DEPTH GUIDELINES The figures in these tables have been calculated, based on field experiences, and may be reasonably expected. Actual drilling capacity will depend on in-hole tools and conditions,
More informationMINING & DRILLING PRODUCTS DRILL ROD AND CASING. Parallel Wall Drill Rod LITE Drill Rod Thin Wall Drill Rod Casing Adaptor Subs.
MINING & DRILLING PRODUCTS DRILL ROD AND CASING Parallel Wall Drill Rod LITE Drill Rod Thin Wall Drill Rod Casing Adaptor Subs www.di-corp.com DOWN TO EARTH BUSINESS AT DI-CORP, WE HAVE PROUDLY DEVELOPED
More informationCopyright 2015 Boart Longyear. All Rights Reserved. LS TM 250 MINISONIC TM RIG
LS TM 250 MINISONI TM RIG 1 LS TM 250 MINISONI TM RIG The new LS TM 250 MiniSonic TM is a compact rig perfect for a wide variety of projects in environmental, geotechnical, water, and mining. The LS250
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationSP Series - Fiberglass Epoxy Integral Joint Surface Pipe
SP Series - Fiberglass Epoxy Integral Joint Surface Pipe Applications Flow Lines Injection Lines Gas Gathering & Transport Lines Recirculating Lines Solution Mining Water Processing Joining System Features
More informationTMK QUANTUM Infinity. Unlimited Stage Fracturing System COMPLETIONS
TMK QUANTUM Infinity Unlimited Stage Fracturing System COMPLETIONS TMK QUANTUM Infinity TMK QUANTUM Infinity ball-actuated sliding sleeve system utilizes a revolutionary, patent pending electronic counter
More informationTOP HAMMER DRILLING TOOLS. Percussive Products
TOP HAMMER DRILLING TOOLS Percussive Products 2 TABLE OF CONTENTS HARD ROCK TOOLING OVERVIEW 5 Bit Types 6 Bit Face Designs 8 Button Types 9 Blade Bit Designs 10 Reaming Tooling Designs 11 Rod Types 12
More informationVAM SLIJ II TM The Semi-Flush connection from a name you trust
Integral connections VAM SLIJ II TM The Semi-Flush connection from a name you trust 2014 - Vallourec Oil and Gas France VAM SLIJ-II TM is a gas tight expanded box premium connection combining maximum external
More informationSRD 5C & 6C Series Diamond Drill Rigs
SRD 5C & 6C Series Diamond Drill Rigs About Us Solid Rigs is a drill rig and drilling tools manufacturer, that has been producing drill rigs and drilling tools for both the Civil and Mining industries
More informationDiamec Smart 6 Core drilling rig
Diamec Smart 6 Core drilling rig Hole diameter: A, B, N and H Designed to perform Epiroc's advanced Rig Control System means the Diamec Smart 6 operates automatically. Drilling functions are easily performed
More informationHealth, Safety and Environment: Product Performance: Proven Quality: Presence: Client Focus: Tried and Tested:
Wenzel Downhole Tools is the leading motor and drilling tool supplier, with worldwide operations supporting the oilfield and construction industries. Wenzel s capability to engineer, manufacture and service
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationWedge /8" TO 13 5/8"
Wedge 563 2 3/8" TO 13 5/8" TenarisHydril TenarisHydril offers outstanding premium connection design and technology worldwide With a comprehensive range of high performance products backed by an extensive
More informationNO.2311 AN API Q1, 8C AND ISO 9001:2008 REGISTERED COMPANY
NO.2311 AN API Q1, 8C AND ISO 9001:2008 REGISTERED COMPANY Table of Contents westcointl.com Tubing Tongs (Model 4500/5500/5600/57801/57802) WESTCO Model RS Closed Head Tong (Model 58-93R) Casing Tongs
More informationLatest Advancements in DrillString Mechanics
Services, Trainings, Softwares Latest Advancements in DrillString Mechanics SPE Gulf Coast Section 03/09/2016 Stephane Menand, Ph.D. stephane.menand@drillscan.com 1 DrillScan Intro Directional Drilling
More informationEXAMPLES GEARS. page 1
(EXAMPLES GEARS) EXAMPLES GEARS Example 1: Shilds p. 76 A 20 full depth spur pinion is to trans mit 1.25 kw at 850 rpm. The pinion has 18 teeth. Determine the Lewis bending stress if the module is 2 and
More informationConveyor chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Conveyor chains American type Conveyor chains - American type Approved Performance from Rexnord. Fulfils ANSI quality requirements Inner link Carbon steel Roller Carbon
More informationOvershots. Drill Rods. Casing. Tools 12/06-MKT1644 P/N M
REV 0-DEC-06 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Diamond Products Impregnated Bits Reaming
More informationHXY-5A Core Drilling Rig
HXY-5A Core Drilling Rig I. General Introduction HXY-5A CORE DRILL, the improved product based on XY-44 core drill and integrated with the advantages and characteristics of various core drills manufactured
More informationBondstrand 5000/5000C Product Data (Severely Corrosive Industrial Service and Oxidizing Acids)
Bondstrand 5000/5000C Product Data (Severely Corrosive Industrial Service and Oxidizing Acids) Uses and Applications Acid drains Bleach processing Chemical process piping Chlorinated water Chlorine Corrosive
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationT&C connections VAM 21 / VAM 21 HT. Connect with Confidence Vallourec Oil and Gas France
T&C connections VAM 21 / VAM 21 HT Connect with Confidence 2015 - Vallourec Oil and Gas France 2015 - Vallourec Oil and Gas France VAM 21 is the latest generation of T&C premium connection introducing
More informationLX 6 GEO-TECHNICAL DRILL (DB525) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.
LX 6 GEO-TECHNICAL DRILL (DB525) Technical Overview Copyright 2011 Boart Longyear. All rights reserved. Copyright 2011 Boart Longyear. All rights reserved. LX 6 GEO-TECHNICAL DRILL HIGH DRILLING POWER
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationCompletion Solutions Inc.
Completion Solutions Inc. Simple Designs That Simply Work! Company Introduction Dec 2012 1 Who is Completions Solutions Inc? Founded in 2012 Focused on efficient and economical well bore stimulation (both
More informationAt the TOP in Fatigue Performance
At the TOP in Fatigue Performance meeting your Drilling & Production Riser requirements 21 TOP TOP HC TOP HT SLIJ II FJL HTF SG DINO BIG OMEGA TM TOP FE TTR LDR HW ST MUST Swoosh Fatigue enhanced thread
More information00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
More informationXY-44A CORE DRILLING RIG
XY-44A CORE DRILLING RIG Ⅰ. General XY-44A Core Drill, a new type of product with enhanced capacity, is a kind of hydraulic-driven, spindle, diamond-bit, and small-diameter core drill with fairly powerful
More informationSTS SYSTEMS PRODUCT CATALOGUE.
STS SYSTEMS PRODUCT CATALOGUE CONTENTS Civil 4 Construction 18 Mining 46 Contact STS Systems 64 Supporting our world s infrastructure STS Systems, originally Severs Technical Systems, was formed in 1992.
More informationEVERDIGM EXPLORATION DRILL RIGS CORE DRILL RIGS
EVERDIGM EXPLORATION DRILL RIGS CORE DRILL RIGS EVERDIGM CORE DRILL RIGS CROWN BLOCK UPPER HOIST LIMIT (OPTIONAL) UPPER MAST ROD KICKER LOWER MAST HYDRAULIC OIL TANK CONTROL PANEL POWER UNIT ROTARY HEAD
More informationCORE DRILL RIGS EVERDIGM EVERLASTING PARADIGM TOTAL SOLUTION PROVIDER CREATING MORE VALUE FOR FUTURE GENERATION EVERDIGM EXPLORATION DRILL RIGS
EVERDIGM EVERLASTING PARADIGM EVERDIGM is large sized company with $300M turnover manufacturing high-end Construction, Mining, and Special Purpose Vehicle in Korea. The products have been globally distributed
More informationTrihawk. and hawkeye. ditchwitch.com
Ditch witch HDD Systems Trihawk and hawkeye ditchwitch.com Ditch witch HDD Systems TriHawk and Hawkeye 01 TriHawk HD Housing 02 TriHawk I Drill Bit 03 TriHawk III Drill Bit 04 TriHawk IV Drill Bit 05 TriHawk
More informationReady for Rock? 2 v e r m e e r. c o m
D36x50DR Series II Navigator HDD D36x50DR Series II Navigator Horizontal Directional Drill Ready for Rock? The D36x50DR Series II is. Featuring dual rod technology, this drill just won t quit, whether
More informationZERO BACKLASH GEARING
ZERO BACKLASH GEARING Based on Nexen s innovative Roller Pinion technology, the Geared Bearing comes complete with a gear and a precision grade, high capacity bearing. With a wide range of sizes and ratios,
More informationService Tools Catalog
Service Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Product Description Page Type P
More informationVICTAULIC Shouldered Solutions
VICTAULIC Shouldered Solutions With a full range of couplings, fittings and valves, Victaulic offers a complete system of products that install safer, easier and up to 10 times faster than alternative
More informationMagneto-Rheological (MR) Suspension Systems FOR INDUSTRIAL APPLICATIONS
Magneto-Rheological (MR) Suspension Systems FOR INDUSTRIAL APPLICATIONS Improving Operator Comfort, Health and Safety Operators of heavy machinery spend a lot of time in harsh and unpleasant vibration
More informationD36X50DR SERIES II NAVIGATOR HDD D36X50DR SERIES II NAVIGATOR HORIZONTAL DIRECTIONAL DRILL
D36X50DR SERIES II NAVIGATOR HDD D36X50DR SERIES II NAVIGATOR HORIZONTAL DIRECTIONAL DRILL Ready for Rock? The D36x50DR Series II Navigator horizontal directional drill is. Featuring dual rod technology,
More informationInstructions for the following product: CONCRETE MOUNTED JIB BASE
Instructions for the following product: CONCRETE MOUNTED JIB BASE Model No:8530483 USER INSTRUCTION MANUAL: CONCRETE MOUNTED JIB BASE WARNING: This product is part of a fall arrest or rescue system. These
More informationDODGE QUANTIS MAKES THE GLOBAL CONNECTION
DODGE QUANTIS MAKES THE GLOBAL CONNECTION HOLLOW SHAFT SOLID SHAFT DOUBLE ENDED SOLID SHAFT HOLLOW SPLINED SHAFT SHRINK DISK CONNECTION SHAFT RHB FOOTLESS FLANGE RHB FOOT MOUNTED NE SEPARA ARATE C Output
More informationCourtesy of Steven Engineering, Inc - (800) PATENTED
PRECISION RING DRIVE SYSTEMS Based on Nexen s innovative Roller Pinion technology, Nexen Ring Drive Systems come complete with a precision grade, high capacity bearing and drive mechanism in a rigid housing.
More informationEUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER
EUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER TMX Power s Featuring the quality and precision associated with European manufacturing, TMX Power s are direct,
More informationCylindrical roller bearings for large electric motors
Cylindrical roller bearings for large electric motors Cylindrical roller bearings are typically used in belt or gear driven medium- to largesized electric motors, where heavy radial loads prevail. These
More informationXY-42A CORE DRILLING RIG
XY-42A CORE DRILLING RIG Ⅰ. Applications XY-42A is a kind of core drill driven with Tungaloy-carbide-tipped bit and diamond-bit, small-diameter. It is mainly suitable for exploration of metal or non-metal
More informationDrill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated Bits
More informationDiamec PHC range Core drilling rigs
Diamec PH range ore drilling rigs Hole diameter:,, N and H ore drilling rigs that you can depend on The machines in the rugged Diamec PH-series (Pilot Hydraulic ontrol) utilize well-proven technology.
More informationThe Impact of Well Features on CT Reach. Presented by Patrick Kelleher
The Impact of Well Features on CT Reach Presented by Patrick Kelleher ICoTA Calgary Round Table 2014 October 29, 2014 Based on Forthcoming SPE-173666-MS Patrick Kelleher, Ken Newman - Athena Engineering
More informationQuantum LMV. Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors. GE Power Conversion
GE Power Conversion Quantum LMV Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors NEMA 500 Frames IEC 315 Frames 200-800 HP 150-600 kw 2-12 Pole Ratings to Fit Your Applications NEMA
More informationATV ROTA-SONIC DRILL RIG (LS600)
ATV ROTA-SONIC DRILL RIG (LS600) TECHNICAL DATA SHEET GENERAL DESCRIPTION The GeoSonic Large Sonic (also known as the LS600 ATV) is a self-contained drill rig especially designed for sonic drilling through
More informationExplorac 100 Reverse circulation drill rig for exploration drilling
Explorac 100 Reverse circulation drill rig for exploration drilling Hole diameter: 127 165 mm (5" 6.5") Fast and accurate Reverse circulation (RC) drilling represents a fast and economical way to retrieve
More informationDRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS
ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationTTT RESPECT SUPPORT INSPIRE MULTI TOOL SYSTEMS ULTRA, ULTRA UMT & ULTRA IMT FOR THICK TURRET
TTT RESPECT SUPPORT INSPIRE MULTI TOOL SYSTEMS ULTRA, ULTRA UMT & ULTRA IMT FOR THICK TURRET 2INTRODUCTION MATE PRECISION TOOLING FIVE DECADES OF GLOBAL EXCELLENCE Founded in 1962, Mate is a world-class
More informationCAT HYDRAULIC HOSE SOLUTIONS THE PREFERRED CONNECTION
CAT HYDRAULIC HOSE SOLUTIONS THE PREFERRED CONNECTION When it comes to hydraulics, you want the safest and most reliable components on your machine. THAT S WHY CATERPILLAR OFFERS SUPERIOR HOSE SOLUTIONS
More informationDANDO MULTITEC 4000 MK3
DANDO MULTITEC 4000 MK3 Multipurpose Drilling Rig WWW.DANDO.CO.UK Multitec 4000 Features 4 speed rotary head mounted to a hydraulic side shift with optional floating spindle. Hydraulic head tilt available.
More informationCONSTRUCTION PRODUCT CATALOGUE.
CONSTRUCTION PRODUCT CATALOGUE CONTENTS Void Former Anchor Pan Heavy Duty AS1314 Flat Anchor Standard AS1314 Flat Anchor 3 Strand Flat Anchor 15.2 Strand Flat Anchor Wedge Blocks Mono Anchor Wedges Ducting
More informationHUSKY DRILL RODS & CASING
BWL NWL HWL HUSKY DRILL RODS & CASING TRIED AND TESTED BY DRILL CREWS FOR TROUBLE-FREE DRILLING Husky drill rods and casing are quality-crafted in DCDMA standard sizes using superior alloy steel, with
More informationDEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance
More informationSubmittal Data. Fiberglass Bondstrand 3000A Pipe
Submittal Data Fiberglass Bondstrand 3000A Pipe Uses and Applications Cooling water General service piping Jet fuel piping Mild chemicals Municipal waste Potable water Power plant, steel mill and industrial
More informationSynthetic wind turbine gear oil. Developed with NUFLUX technology
Synthetic wind turbine gear oil Developed with NUFLUX technology Evonik specialists continually work to meet tomorrow s demands today by developing forward-looking technologies and new formulations with
More informationCoaxial Joining (6-axis) FUS
Original Manual Coaxial Joining (6-axis) FUS Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property of SCHUNK GmbH & Co. KG.
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability
More informationHOT TAPPING & PLUGGING SOLUTIONS
HOT TAPPING & PLUGGING SOLUTIONS STOPPLE Plus System Combined with a LOCK-O-RING Plus completion plug, the STOPPLE Plus fitting reduces installation time, simplifies the setting process, and eliminates
More informationChristensen CT20. Surface core drill rig for mineral exploration
Christensen CT20 Surface core drill rig for mineral exploration MODERN DEEP HOLE DRILLING Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck mounted or crawler mounted,
More informationFive Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system.
Five Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system. Five Hoses. Two Fittings. One Solution... Providing a simple solution of robust
More informationNeyrfor Turbodrill Handbook
Neyrfor Handbook Neyrfor Handbook Schlumberger 375 Briarpark Drive Houston, Texas 7742 www.slb.com Produced by Schlumberger Marketing Communications Copyright 212 Schlumberger. All rights reserved. No
More informationGET 30% MORE ROAD EVERTREAD. WITH THE NEW MICHELIN XZA3 + Dual Compound Tread
GET 30% MORE ROAD WITH THE NEW MICHELIN XZA3 + EVERTREAD. Dual Compound Tread The Legend For decades, Michelin has been a leader in the industry for steer tires. The MICHELIN XZA tire was a revolutionary
More informationI-Line Combo Panelboard
TM I-Line Save time and space by combining I-Line and NQ/NF sections in one panelboard. Explore the I-Line 3D Interactive Model! Scan this QR code with your smartphone to download the itunes 3D Interactive
More informationGLOBAL PRODUCT CATALOGUE. January 2009 PERCUSSIVE TOOLING. THIS PAGE LEFT INTENTIONALLY BLANK
GLOBAL PRODUCT CATALOGUE THIS PAGE LEFT INTENTIONALLY BLANK PERCUSSIVE TOOLING January 2009 www.boartlongyear.com TABLE OF CONTENTS About Our Products 4 SAFETY 7 Overview 11 SYSTEM Set-up 12 bits 15 rods
More informationCompensator. RCC - Remote Center Compliance Device
Compensator RCC - Remote Center Compliance Device COMPENSATOR Product Description The Compensator is a Remote Center of Compliance (RCC) device designed to correct alignment errors with peg-in-hole automated
More informationCustom Rotary Unions
Custom Rotary Unions for transferring fluid and power Engineered rotary unions, swivels, and pipe connectors Engineered reliability and performance. Innovation In 1933, Kadant Johnson invented the rotary
More informationROTARY MOTION CONTROL
ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring
More informationMERITOR ALLFIT CLUTCHES COMPREHENSIVE ALL-MAKES LINE-UP. UNCOMPROMISING QUALITY.
MERITOR ALLFIT CLUTCHES COMPREHENSIVE ALL-MAKES LINE-UP. UNCOMPROMISING QUALITY. MERITOR ALLFIT CLUTCHES. ALL-MAKES FOR ALL YOUR APPLICATION NEEDS. As a leading supplier of drivetrain systems and components
More informationFive Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system.
Five Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system. Five Hoses. Two Fittings. One Solution... Providing a simple solution of robust
More informationSX Rotary Joints For steam or thermal oil service
SX Rotary oints or steam or thermal oil service Self-aligning seal with dual carbon bearing support. Engineered reliability and performance. Table of ontents SX Rotary oint verview..................................................................3
More informationTECHNICAL UNIT DAVIS-LYNCH INC. TYPE 778-MC & 777-HY STAGE COLLAR JCE 02/17/03. FILE: 778-MC TECH NEW.doc REV. 1 Page 1 of 6 DAVIS
FILE: 778-MC TECH NEW.doc REV. 1 Page 1 of 6 DAVIS FILE: 778-MC TECH NEW.doc REV. 1 Page 2 of 6 DESCRIPTION In the process of cementing a casing string of an oil or gas well, it may be desirable or necessary
More informationCOLUMBUS McKINNON CORPORATION
COLUMBUS McKINNON CORPORATION INNOVATIVE ENGINEERING DESIGNED FOR YOU To create the best ratchet lever hoist on the market, Columbus McKinnon started with a fundamental question how do people use ratchet
More informationWELCOME TO MINING READY SUMMIT
WELCOME TO MINING READY SUMMIT EXPERTS IN REMOTE SITE ACCESS EQUIPMENT SOLUTIONS SERVING NORTHERN ONTARIO DEALER FOR: WINTER ROAD SNOW-CATS AND NOW!. ARGO Vehicles for Exploration, Drilling, Mining and
More informationTenarisXP Buttress 4 1/2" TO 16"
TenarisXP Buttress 4 1/2" TO 16" Tenaris Tenaris is a leading supplier of tubes and related services for the world s energy industry and certain other industrial applications Our mission is to deliver
More informationRODEC TUBING ROTATOR SOLUTIONS
RODEC TUBING ROTATOR SOLUTIONS RODEC TUBING ROTATOR SOLUTIONS One Company, Unlimited Solutions Since 1841, National Oilwell Varco has been dedicated to ensuring customers receive the highest quality oilfield
More informationAccelerating the Oilfield, Empowering the Industry
Accelerating the Oilfield, Empowering the Industry Presentation for ROMANIA UPSTREAM CONFERENCE 13 th March 2012 Andy Thompson Tercel Oilfield Products About Tercel Tercel Oilfield Products is a designer
More informationMICHELIN RETREAD TECHNOLOGIES QUICK REFERENCE TREAD GUIDE
MICHELIN RETREAD TECHNOLOGIES QUICK REFERENCE TREAD GUIDE www.michelintruck.com TABLE OF CONTENTS ALL POSITION RETREADS....3 XZA.... 3 XZE.... 3 XZE SA.... 3 XZE 2.... 4 XZA Wide Base.... 4 XZU 2.... 4
More informationBox Thread A B C D E F Weight F 15,000 lb 45,000 lb 2 IF API 2-1/2 1 7/8 11-1/8 1-3/4 7/ lb
00503 Series DUB-Lite Specifically built for the HDD industry, DUB-Lite swivels feature a multiple sealing system which is progressive in design and application. Swivels 00503-X04 to 00503-X15 include
More informationSuper Centurion Hydrants Designed for efficient flow and outstanding, long-term reliability
Super Centurion Hydrants Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion Fire Hydrants High flow and dependable long time performance. 1 Hold-down nut Features
More informationDeltaBase 540 Technical Data Sheet
Release Date: May 10th, 2008 Page 1 of 7 PRODUCT OVERVIEW The DeltaBase 540 is a powerful and versatile Multipurpose drill rig. With the ability to perform coring, DTH drilling, rotary flush, auger drilling
More informationDRILL PIPE CARE AND HANDLING Complete Group AVENUE Leduc AB T9E 0W1 +1 (780) CG.ENG.
DRILL PIPE CARE DRILL PIPE INTRODUCTION Box End Hardbanding Tapered Shoulder Tong Area Weld DEFINITION The drillpipe connects the rig surface equipment with the bottomhole assembly and the bit, both to
More information