MEDICAL GAS OUTLETS. Medical
|
|
- Ezra Nelson Foster
- 6 years ago
- Views:
Transcription
1 Medical MEDICL GS OUTLETS DIN BS 5682:2015 SS FNOR NF S / FD S S 2896 JIS T 7101 UNI 9507 ENV EN SDEG EN ISO IR MOTOR
2
3 SUMMRY outlets OR range 6 Base block 8 Socket 16 Plastic box 30 Our ideas our strength. fast information and order management and flexibility of production, are the basis of our service. outlets UNI 9507 and FNOR NFS Base block 34 Socket 36 Plastic box 39 NIST connectors (NIST) 40 naesthetic Scavenging System (GSS) and ir Motor 44 dapters for ambulances 52 Flow-meter 59 Flexible hoses for medical gas 66 5
4 outlets OR range The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards so to grant a non-interchangeability among different gases and prevent from any possible mistake. The OR range socket can be fixed to the base block in only one position. The profile of the installed socket is always in the correct position. 7
5 NEWS 2016 Brass/zamac base block c/w vertical copper pipe ØB Ø B ZRMOR08-T-O 36 8 OXYGEN ZRMOR08-T-V 36 8 VCUUM ZRMOR08-T IR ZRMOR08-T-P 36 8 Nitrous oxide ZRMOR08-T IR-800 ZRMOR08-T-C 36 8 Carbon dioxide ZRMOR08-T-N 36 8 Nitrogen C/w plug for test. 45 Base block OR range This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed complying with the standard EN ISO for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. Materials: Brass EN CuZn39Pb3 NBR/EPDM ISI Brass/zamac base block c/w vertical copper pipe Ø B ZRMOR10-T-O OXYGEN ZRMOR10-T-V VCUUM ZRMOR10-T IR ZRMOR10-T-P Nitrous oxide ZRMOR10-T IR-800 ZRMOR10-T-C Carbon dioxide ZRMOR10-T-N Nitrogen C/w plug for test. ØB 45 9
6 45 Brass/zamac base block c/w 45 copper pipe Brass/zamac base block c/w 135 copper pipe 45 Ø B Ø B ØB zarmorz08-45t-o 36 8 OXYGEN zarmorz08-45t-v 36 8 VCUUM zarmorz08-45t IR zarmorz08-45t-p 36 8 Nitrous oxide zarmorz08-45t IR-800 ZRMORZ10-135T-O OXYGEN ZRMORZ10-135T-V VCUUM ZRMORZ10-135T IR ZRMORZ10-135T-P Nitrous oxide ZRMORZ10-135T IR-800 zarmorz08-45t-c 36 8 Carbon dioxide ZRMORZ10-135T-C Carbon dioxide 135 ØB 45 zarmorz08-45t-n 36 8 Nitrogen C/w plug for test. ZRMORZ10-135T-N Nitrogen C/w plug for test. 45 Brass/zamac base block c/w 45 copper pipe Ø B ØB zarmorz10-45t-o OXYGEN zarmorz10-45t-v VCUUM 45 zarmorz10-45t IR zarmorz10-45t-p Nitrous oxide zarmorz10-45t IR-800 zarmorz10-45t-c Carbon dioxide zarmorz10-45t-n Nitrogen C/w plug for test. Brass base block c/w 45 hole Ø B ZRMOR-45-O 18,7 8 OXYGEN ZRMOR-45-V 18,7 8 VCUUM ZRMOR ,7 8 IR ZRMOR-45-P 18,7 8 Nitrous oxide ZRMOR ,7 8 IR-800 ØB Brass/zamac base block c/w 135 copper pipe ZRMOR-45-C 18,7 8 Carbon dioxide 45 Ø B ZRMORZ08-135T-O 36 8 OXYGEN ZRMOR-45-OP 18,7 8 OXYGEN/Nitrous oxide ZRMOR10-45-O 18,7 10 OXYGEN ZRMORZ08-135T-V 36 8 VCUUM ZRMOR10-45-V 18,7 10 VCUUM ZRMORZ08-135T IR ZRMOR ,7 10 IR ZRMORZ08-135T-P 36 8 Nitrous oxide ZRMOR10-45-P 18,7 10 Nitrous oxide ZRMORZ08-135T IR-800 ZRMOR ,7 10 IR-800 ZRMORZ08-135T-C 36 8 Carbon dioxide ZRMOR10-45-C 18,7 10 Carbon dioxide 135 ØB ZRMORZ08-135T-N 36 8 Nitrogen ZRMOR10-45-OP 18,7 10 OXYGEN/Nitrous oxide C/w plug for test. C/w plug for test
7 BRSS base block c/w 135 hole Brass base block c/w back copper pipe 140 Ø B Ø B 135 ZRMOR-135-O 18,7 8 OXYGEN ZRMORD-T-O 23,7 8 OXYGEN ØB ZRMOR-135-V 18,7 8 VCUUM ZRMORD-T-V 23,7 8 VCUUM ZRMOR ,7 8 IR ZRMORD-T-4 23,7 8 IR ØB ZRMOR-135-P 18,7 8 Nitrous oxide ZRMOR ,7 8 IR-800 ZRMORD-T-P 23,7 8 Nitrous oxide ZRMORD-T-8 23,7 8 IR ZRMOR-135-C 18,7 8 Carbon dioxide ZRMORD-T-C 23,7 8 Carbon dioxide ZRMOR-135-N 18,7 8 Nitrogen ZRMORD-T-N 23,7 8 Nitrogen C/w plug for test. C/w plug for test. Brass base block for flexible hose Ø B ØB ZRMOR-PG6-O 23,7 6 OXYGEN ZRMOR-PG8-V 23,7 8 VCUUM 9 ØB Vertical inlet brass base block Ø B ZRMOR-O 18,7 8 OXYGEN ZRMOR-V 18,7 8 VCUUM ZRMOR-4 18,7 8 IR ZRMOR-P 18,7 8 Nitrous oxide ZRMOR-8 18,7 8 IR-800 ZRMOR-PG6-4 23,7 6 IR ZRMOR-PG6-P 23,7 6 Nitrous oxide ZRMOR-PG6-8 23,7 6 IR-800 ZRMOR-PG6-C 23,7 6 Carbon dioxide ZRMOR-PG6-N 23,7 6 Nitrogen C/w plug for test ZRMOR-C 18,7 8 Carbon dioxide ZRMOR-OP 18,7 8 OXYGEN/Nitrous oxide Brass base block c/w NIST connector 65 ZRMOR10-O 18,7 10 OXYGEN ZRMORD-O-MNIST 23,7 OXYGEN ZRMOR10-V 18,7 10 VCUUM ZRMORD-V-MNIST 23,7 VCUUM ZRMOR ,7 10 IR ZRMORD-4-MNIST 23,7 IR ZRMOR10-P 18,7 10 Nitrous oxide ZRMORD-P-MNIST 23,7 Nitrous oxide ZRMOR ,7 10 IR-800 ZRMOR10-C 18,7 10 Carbon dioxide ZRMOR10-OP 18,7 10 OXYGEN/Nitrous oxide C/w plug for test. ZRMORD-8-MNIST 23,7 IR-800 ZRMORD-C-MNIST 23,7 Carbon dioxide ZRMORD-N-MNIST 23,7 Nitrogen C/w plug for test
8 Brass base block for flexible hose Ø B Brass base block c/w vertical copper pipe Ø B ØB ZRMORD-O-PG6 18,7 6 OXYGEN ZRMOR-T-O 18,7 8 OXYGEN 140 ØB ZRMORD-V-PG8 18,7 8 VCUUM ZRMOR-T-V 18,7 8 VCUUM ZRMORD-4-PG6 18,7 6 IR ZRMOR-T-4 18,7 8 IR ZRMORD-P-PG6 18,7 6 Nitrous oxide ZRMORD-8-PG6 18,7 6 IR-800 ZRMOR-T-P 18,7 8 Nitrous oxide ZRMOR-T-8 18,7 8 IR-800 ZRMORD-C-PG6 18,7 6 Carbon dioxide ZRMORD-N-PG6 18,7 6 Nitrogen C/w plug for test. Brass base block c/w 45 copper pipe Ø B ZRMOR-T-C 18,7 8 Carbon dioxide ZRMOR-T-OP 18,7 8 OXYGEN/Nitrous oxide ZRMOR10-T-O 18,7 10 OXYGEN ZRMOR10-T-V 18,7 10 VCUUM ZRMOR10-T-4 18,7 10 IR ZRMOR10-T-P 18,7 10 Nitrous oxide ZRMOR10-T-8 18,7 10 IR-800 ZRMOR10-T-C 18,7 10 Carbon dioxide ZRMOR10-T-N 18,7 10 Nitrogen ZRMOR10-T-OP 18,7 10 OXYGEN/Nitrous oxide C/w plug for test ØB 45 ZRMOR-45T-O/1 18,7 8 OXYGEN ZRMOR-45T-V/1 18,7 8 VCUUM ZRMOR-45T-4/1 18,7 8 IR ZRMOR-45T-P/1 18,7 8 Nitrous oxide ZRMOR-45T-8/1 18,7 8 IR-800 ZRMOR-45T-C/1 18,7 8 Carbon dioxide ZRMOR-45T-OP/1 18,7 8 OXYGEN/Nitrous oxide ZRMOR1045T-O/1 18,7 10 OXYGEN ZRMOR1045T-V/1 18,7 10 VCUUM ZRMOR1045T4/1 18,7 10 IR ZRMOR1045T-P/1 18,7 10 Nitrous oxide ZRMOR1045T8/1 18,7 10 IR-800 ZRMOR1045T-C/1 18,7 10 Carbon dioxide ZRMOR1045TOP/1 18,7 10 OXYGEN/Nitrous oxide C/w plug for test. SPRE PRT Spare part kit for base block ZRMOR/VNR LL 14 15
9 NEWS 2016 Sockets OR range The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: BS 5682:1998, DIN , NF S , FD S , SS , JIS T 7101, S 2896 and ENV for the dimensions of linking point to the probe; EN ISO for design and manufacture requirements. Materials: Brass EN CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM DIN New DIN socket c/w metal sleeve VGTDEM-OR-O VGTDEM-OR-V VGTDEM-OR-4 VGTDEM-OR-P VGTDEM-OR-C OXYGEN VCUUM IR Nitrous oxide Carbon dioxide Ø45 VGTDEM-OR-N Nitrogen Supplied with releaser sleeve that can be custom made on request
10 New DIN socket c/w plastic sleeve DIN profile cover COLOUR VGTDE-OR-O OXYGEN ZGD75-o OXYGEN WITE Ø45 VGTDE-OR-V VCUUM ZGD75-V VCUUM YELLOW VGTDE-OR-4 IR ZGD75-4 IR BLCK/WITE VGTDE-OR-P Nitrous oxide ZGD75-P Nitrous oxide BLUE 44 VGTDE-OR-C VGTDE-OR-N Carbon dioxide Nitrogen ZGD75-C Carbon dioxide GREY Supplied with releaser sleeve that can be custom made on request. Ø 75 DIN socket DIN PROBE 44 Ø45 VGTDM-OR-O OXYGEN VGTDM-OR-V VCUUM VGTDM-OR-4 IR VGTDM-OR-P Nitrous oxide VGTDM-OR-C Carbon dioxide VGTDM-OR-N Nitrogen Supplied with releaser sleeve that can be custom made on request. Elbow barb end probe DISTINCTIVE COLOUR IGTGD-PG6-O WITE 6 OXYGEN IGTGD-PG8-V YELLOW 8 VCUUM IGTGD-PG6-4 BLCK-WITE 6 IR IGTGD-PG6-P BLUE 6 Nitrous oxide IGTGD-PG6-C GREY 6 Carbon dioxide IGTGD-PG6-N BLCK 6 Nitrogen Supplied with sticky label that can be custom made on request. Elbow barb end probe with check valve DIN horizontal socket for flow-meters DISTINCTIVE COLOUR IIGTGD-PG6-O WITE 6 OXYGEN Ø45 VGTDMO-OR-O OXYGEN IIGTGD-PG6-4 BLCK-WITE 6 IR 28 VGTDMO-OR-C Carbon dioxide IIGTGD-PG6-P BLUE 6 Nitrous oxide VGTDMO-OR-N Nitrogen IIGTGD-PG6-C GREY 6 Carbon dioxide Supplied with releaser sleeve that can be custom made on request. Supplied with sticky label that can be custom made on request
11 F1/4 probe BS 5682:2015 plastic socket F1/4 DISTINCTIVE COLOUR IGTD-F1/4-O WITE 6 OXYGEN IGTD-F1/4-V YELLOW 8 VCUUM IGTD-F1/4-4 BLCK-WITE 6 IR IGTD-F1/4-P BLUE 6 Nitrous oxide IGTD-F1/4-C GREY 6 Carbon dioxide Supplied with releaser sleeve that can be custom made on request. VGTBSP-OR-O OXYGEN VGTBSP-OR-V VCUUM VGTBSP-OR-4 IR VGTBSP-OR-P Nitrous oxide VGTBSP-OR-C Carbon dioxide VGTBSP-OR-8 IR-800 Supplied with releaser sleeve that can be custom made on request. 43 Ø50 BS 5682:2015 BS 5682:2015 socket GSS BS 8532:2011 Ø 12 VGTBSM-OR-O OXYGEN VGS-BS with box 141 Ø50 VGTBSM-OR-V VCUUM VGS-BS/1 without box VGTBSM-OR-4 IR VGTBSM-OR-P Nitrous oxide 43 VGTBSM-OR-C VGTBSM-OR-8 Carbon dioxide IR-800 Supplied with releaser sleeve that can be custom made on request. GSS BS 8532:2011 c/w NIST connector BS 5682:2015 horizontal socket for flow-meters VEGS-BS-MNIST Ø50 VGTBSMO-OR-O VGTBSMO-OR-V VGTBSMO-OR-4 VGTBSMO-OR-P OXYGEN VCUUM IR Nitrous oxide 43 VGTBSMO-OR-C VGTBSMO-OR-8 Carbon dioxide IR-800 Supplied with releaser sleeve that can be custom made on request
12 BS 5682:2015 Probe Bulkhead nut B COLOUR 3 Straight barb end probe PGTF/1 18,7 36,6 GREY IGTBS-PG6-O 6,5 OXYGEN M27x1 B IGTBS-PG8-V 8 VCUUM 66 IGTBS-PG6-4 6,5 IR IGTBS-PG6-P 6,5 Nitrous oxide IGTBS-PG6-8 6,5 IR-800 Made of nickel plated brass. identification ring B COLOUR F1/4 probe IGTBS-F1/4-O 1/4 OXYGEN ZGTF-O WITE OXYGEN ZGTF-V YELLOW VCUUM ZGTF BLCK/WITE IR 58,3 IGTBS-F1/4-V 1/4 VCUUM IGTBS-F1/4-4 1/4 IR Made of nickel plated brass. ZGTF-P BLUE Nitrous oxide ZGTF WITE/BLCK IR-800 ZGTF-C GREY Carbon dioxide FNOR NF S FD S ZGTFD70-O WITE OXYGEN ZGTFD70-V YELLOW VCUUM ZGTFD BLCK/WITE IR ZGTFD70-P BLUE Nitrous oxide ZGTFD WITE/BLCK IR-800 B 38 FNOR socket ZGTFD70-C GREY Carbon dioxide M27x1 VGTFM-OR-O VGTFM-OR-V VGTFM-OR-4 OXYGEN VCUUM IR VGTFM-OR-P Nitrous oxide VGTFM-OR-C VGTFM-OR-8 Carbon dioxide IR
13 NF S and FD S Probe F1/4 probe DISTINCTIVE COLOUR IGTF-F1/4-O WITE 6 OXYGEN IGTF-F1/4-V YELLOW 8 VCUUM F 1/4" 51 Straight barb end probe DISTINCTIVE COLOUR IGTF-PG6-O WITE 6 OXYGEN IGTF-F1/4-4 BLCK-WITE 6 IR IGTF-F1/4-P BLUE 6 Nitrous oxide IGTF-F1/4-8 WITE-BLCK 6 IR-800 IGTF-F1/4-C GREY 6 Carbon dioxide 48 IGTF-PG8-V YELLOW 8 VCUUM Supplied with sleeve that can be custom made on request. IGTF-PG6-4 BLCK-WITE 6 IR IGTF-PG6-P BLUE 6 Nitrous oxide IGTF-PG6-8 WITE-BLCK 6 IR-800 IGTF-PG6-C GREY 6 Carbon dioxide Supplied with sleeve that can be custom made on request. 48 Elbow barb end probe Straight swivel male threaded probe DISTINCTIVE COLOUR B DISTINCTIVE COLOUR Ch 20 IGTGF-PG6-O WITE 6 OXYGEN IGTF-OR-M12-O M12x1 WITE OXYGEN IGTGF-PG8-V YELLOW 8 VCUUM IGTF-OR-M12-V M12x1 YELLOW VCUUM 46 B IGTGF-PG6-4 BLCK-WITE 6 IR IGTF-OR-M12-4 M12x1 WITE-BLCK IR IGTGF-PG6-P BLUE 6 Nitrous oxide IGTF-OR-M12-P M12x1 BLUE Nitrous oxide IGTGF-PG6-8 WITE-BLCK 6 IR-800 IGTGF-PG6-C GREY 6 Carbon dioxide IGTF-OR-M12-C M12x1 GREY Carbon dioxide IGTF-OR-M1/8-O 1/8 WITE OXYGEN 41,5 Supplied with sleeve that can be custom made on request. IGTF-OR-M1/8-V 1/8 YELLOW VCUUM M1/8" M1/8 probe DISTINCTIVE COLOUR IGTF-M1/8-O WITE 6 OXYGEN IGTF-M1/8-V YELLOW 8 VCUUM IGTF-M1/8-4 BLCK-WITE 6 IR IGTF-M1/8-P BLUE 6 Nitrous oxide IGTF-OR-M1/8-4 1/8 WITE-BLCK IR IGTF-OR-M1/4-O 1/4 WITE OXYGEN IGTF-OR-M1/4-V 1/4 YELLOW VCUUM Supplied with sleeve that can be custom made on request. 48 IGTF-M1/8-8 WITE-BLCK 6 IR-800 Supplied with sleeve that can be custom made on request
14 SS ENV SS socket ENV socket Ø45 VGTM-OR-O VGTM-OR-V OXYGEN VCUUM VGTEM-OR-O VGTEM-OR-V OXYGEN VCUUM Ø53 VGTM-OR-4 IR VGTEM-OR-4 IR 39 VGTM-OR-P VGTM-OR-C Nitrous oxide Carbon dioxide VGTEM-OR-P VGTEM-OR-C Nitrous oxide Carbon dioxide 46,5 VGTM-OR-8 IR-800 VGTEM-OR-8 IR-800 Supplied with releaser sleeve that can be custom made on request. Supplied with releaser sleeve that can be custom made on request. SS horizontal socket Ø45 VGTMO-OR-O VGTMO-OR-V VGTMO-OR-4 VGTMO-OR-P OXYGEN VCUUM IR Nitrous oxide 39 VGTMO-OR-C VGTMO-OR-8 Carbon dioxide IR-800 Supplied with releaser sleeve that can be custom made on request. SS Probe Straight barb end probe ENV Probe Elbow barb end probe DISTINCTIVE COLOUR IGTGE-PG6-O WITE 6 OXYGEN IGT-PG6-O 6 OXYGEN IGT-PG10-V 10 VCUUM IGTGE-PG8-V YELLOW 8 VCUUM IGTGE-PG6-4 BLCK-WITE 6 IR 55 IGT-PG8-4 8 IR IGT-PG6-P 6 Nitrous oxide IGT-PG8-8 8 IR-800 IGT-PG6-C 6 Carbon dioxide IGTGE-PG6-P BLUE 6 Nitrous oxide IGTGE-PG6-8 WITE-BLCK 6 IR-800 IGTGE-PG6-C GREY 6 Carbon dioxide Supplied with sleeve that can be custom made on request
15 JIS T S 2896 naest hetic Scavenge Ø B Ø B Ø50 JIS T 7101 socket VEGS-S 8 VGTJSM-OR-O OXYGEN VGTJSM-OR-V VCUUM 40,5 VGTJSM-OR-4 VGTJSM-OR-P IR Nitrous oxide 50 S 2896 Ø B S 2896 outlet Ø B S 2896 naest hetic Scavenge c/w NIST connector Ø 195 VGTS-O 1/4 OXYGEN VGTS-V 5/16 VCUUM VEGS-S-MNIST Ø FEMMIN M22X1,5 VGTS-4 1/4 IR Ø50 VGTS-P 1/4 Nitrous oxide VGTS-8 1/4 IR VGTS-C 1/4 Carbon dioxide VGTS-N 1/4 Nitrogen 50 Ø S 2896 outlet c/w NIST connector Ø FEMMIN SPRE PRT Ø 50 VGTS-O-MNIST M22X1,5 OXYGEN VGTS-V-MNIST M22X1,5 VCUUM VGTS-4-MNIST M22X1,5 IR VGTS-P-MNIST M22X1,5 Nitrous oxide VGTS-8-MNIST M22X1,5 IR-800 Spare part kif for socket OR series STNDRD VGTD-OR-RIC DIN OXYGEN, IR, Nitrous oxide, Carbon dioxide VGTD-OR-V-RIC DIN VCUUM 49 VGTS-C-MNIST M22X1,5 Carbon dioxide VGTS-N-MNIST M22X1,5 Nitrogen VGTBS-OR-RIC BS all VGT-OR-RIC SS all 28 29
16 Plastic boxes OR RNGE Lid for BU fnor outlet BOXGTF c/w locking nut 65 BOXGTF-1 without c/w locking nut B 79 Box without lid B Profile ZBOX-GT-OR 56,8 46,2 suitable for DIN and SS ZBOX-GT-OR/01 56,8 52,5 suitable for BS 5682:2015 and JIS T 7101 ZBOX-GT-OR/02 58,8 55 suitable for ENV and DIN ORPEUS Suitable to be either flush-mounted or wall-mounted. identification label for FNOR plastic box BOXGTF/O BOXGTF/V OXYGEN VCUUM GS BOXGTF/4 IR 99 B 79 Box without lid BOXGTF/P BOXGTF/8 BOXGTF/C Nitrous oxide IR-800 Carbon dioxide B Profile BOXGTF/N Nitrogen ZBOX-GT-OR/0 56,8 46,2 without lid for DIN ZBOX-GT-OR/01 56,8 52,5 without lid for SS Box c/w lid for FNOR outlet ZBOXGTF c/w locking nut ZBOXGTF/1 without c/w locking nut 30 31
17 outlets UNI 9507 The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards that ensure the accordance to the European directive 93/42/EEC so to grant a non-interchangeability among different gases and prevent from any possible mistake. 33
18 8 Base block c/w connector to weld ZRM60-O/PB ZRM60-V/PB ZRM60-4/PB ZRM60-P/PB ZRM60-8/PB ZRM60-C/PB ZRM60-N/PB OXYGEN VCUUM IR Nitrous oxide IR-800 Carbon dioxide PROTOSSIDO 36 Base block UNI 9507 exagonal head plug for base block This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed in accordance with the standard EN ISO for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. DISTINCTIVE COLOUR GT-O/TP M22x1,5D WITE OXYGEN GT-V/TP M24x1,5D YELLOW VCUUM GT-4/TP M20x1,5S BLCK IR GT-P/TP M16x1,5D BLUE Nitrous oxide Ch 11 Materials: Brass EN CuZn39Pb3 NBR/EPDM ISI GT-8/TP M18x1,5D BLCK IR-800 GT-C/TP M20x1,5D GREY Carbon dioxide c/w O-ring. Ø36 35
19 New UNI 9507 socket DISTINCTIVE COLOUR 5, VGTIM-O M22x1,5D WITE OXYGEN VGTIM-V M24x1,5D YELLOW VCUUM VGTIM-4 M20x1,5S BLCK-WITE IR VGTIM-P M16x1,5D BLUE Nitrous oxide VGTIM-8 M18x1,5D WITE-BLCK IR-800 VGTIM-C M20x1,5D GREY Carbon dioxide Supplied with sleeve that can be custom made on request. 6,8 Ø53 5, UNI 9507 socket c/w threaded inlet NEWS 2016 DISTINCTIVE COLOUR VGTX60-O-M1/4 1/4 WITE OXYGEN VGTX60-O-M3/8 3/8 WITE OXYGEN 6,8 Ø53 Sockets uni 9507 Supplied with sleeve that can be custom made on request. The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: UNI 9507; EN ISO for design and manufacture requirements. Materials: Brass EN CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM 37
20 UNI 9507 Probes Bulkhead nut B COLOURS Elbow barb end probe DISTINCTIVE COLOUR PGTF/1 18,7 36,6 GREY M27x1 B IGTG60-PG6-O WITE 6 OXYGEN 55 IGTG60-PG8-V YELLOW 8 VCUUM IGTG60-PG6-4 BLCK-WITE 6 IR IGTG45-PG6-P BLUE 6 Nitrous oxide IGTG60-PG6-8 WITE-BLCK 6 IR-800 identification ring IGTG60-PG6-C GREY 6 Carbon dioxide Supplied with sleeve that can be custom made on request. B COLOURS ZGTF-O WITE OXYGEN ZGTF-V YELLOW VCUUM ZGTF BLCK/WITE IR F1/4 probe ZGTF-P BLUE Nitrous oxide F1/4 DISTINCTIVE COLOUR IGT60-F1/4-O WITE 1/4" OXYGEN IGT60-F1/4-V YELLOW 1/4" VCUUM ZGTF WITE/BLCK IR-800 ZGTF-C GREY Carbon dioxide ZGTFD70-O WITE OXYGEN IGT60-F1/4-4 BLCK-WITE 1/4" IR IGT45-F1/4-P BLUE 1/4" Nitrous oxide ZGTFD70-V YELLOW VCUUM ZGTFD BLCK/WITE IR B IGT60-F1/4-8 WITE-BLCK 1/4" IR-800 ZGTFD70-P BLUE Nitrous oxide IGT60-F1/4-C GREY 1/4" Carbon dioxide ZGTFD WITE/BLCK IR-800 Supplied with sleeve that can be custom made on request. ZGTFD70-C GREY Carbon dioxide FNOR NSF socket c/w UNI thread inlet DISTINCTIVE COLOUR UNI 9507 and FNOR NFS BOX 59 VGTF-O M22x1,5D WITE OXYGEN VGTF-V M24x1,5D YELLOW VCUUM VGTF-4 M20x1,5S BLCK-WITE IR VGTF-P M16x1,5D BLUE Nitrous oxide VGTF-8 M18x1,5D WITE-BLCK IR-800 VGTF-C M20x1,5D GREY Carbon dioxide Box BOX-GT Suitable to be either flush-mounted or surface-mounted Supplied with: - service cap; - components designed to link the boxes to form a series ,
21 NIST connectors (NIST) Range of male and female components intended to maintain gas-specificity by allocation of a set of different diameters and screw thread to mating components to each gas. These connectors are suitable for medical gases when the pressure range is 300 kpa kpa and for vacuum when the pressure range is 10 kpa kpa. These components are designed in accordance with the standard EN Materials: Brass EN CuZn39Pb3 nickel plated NBR/EPDM ISI 41
22 1st fix Nist connector c/w copper pipe welded 1st fix Nist connector c/w hosetail Ch ,5 Ch 29 M22x1,5 VGTN-PL-O-T1/2 1/2 OXYGEN VGTN-PL-4-T1/2 1/2 IR VGTN-PL-V-T1/2 1/2 VCUUM VGTN-PL-P-T1/2 1/2 Nitrous oxide VGTN-PL-O-PG6 6 OXYGEN VGTN-PL-4-PG6 6 IR VGTN-PL-V-PG8 8 VCUUM VGTN-PL-P-PG6 6 Nitrous oxide M22x1,5 VGTN-PL-C-T1/2 1/2 Carbon dioxide VGTN-PL-8-PG6 6 IR-800 VGTN-PL-8-T1/2 1/2 IR-800 VGTN-PL-C-PG6 6 Carbon dioxide PL = free flow. PL = free flow. 1st fix Nist connector c/w check valve and copper pipe welded NIST straight barb end probe Ch 32 M22x1,5 VGTN-O-T10 10 OXYGEN VGTN-4-T10 10 IR IGTN-PG6-O 6 OXYGEN IGTN-PG8-V 8 VCUUM M22x1, VGTN-V-T12 12 VCUUM VGTN-P-T10 10 Nitrous oxide VGTN-C-T10 10 Carbon dioxide IGTN-PG6-4 6 IR IGTN-PG6-P 6 Nitrous oxide IGTN-PG6-8 6 IR ,5 VGTN-8-T10 10 IR-800 IGTN-PG6-O 6 IR/OXYGEN VGTN-GSS-T15* 15 SDEG *No check valve. Ch M22x1,5 1st fix Nist connector c/w hosetail & check valve VGTN-O-PG6 6 OXYGEN VGTN-4-PG6 6 IR VGTN-V-PG8 8 VCUUM VGTN-P-PG6 6 Nitrous oxide VGTN-C-PG6 6 Carbon dioxide 1st fix Nist connector c/w M1/4 thread VGTN-O-M1/4 1/4 OXYGEN VGTN-V-M1/4* 1/4 VCUUM VGTN-4-1/4 1/4 IR * Free flow. Ch M22x1,5 VGTN-8-PG6 6 IR
23 naesthetic Scavenging System (GSS) and ir Motor They are the part of system to which the operator makes connection and disconnection for exhausting the medical gases coming from anaesthetic and breathing systems. To grant the gas-specifity and prevent any mistake, these. 45
24 Ø12 GSS type 1L outlet for centralized system DISTINCTIVE COLOUR VEGS120/EN1 red magenta Supplied with metal sleeve that can be custom made on request. Ø50 31,5 47,5 GSS type 1L active Ø12 VEG120/EN1 DISTINCTIVE COLOUR red magenta Ø 10 (supply) Supplied with: - adjusting screw for setting following the standard EN ISO green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB 16 (evacuation) 31,5 47,5 Ø50 EN ISO GSS sockets Ø50 Ø These are the female parts of a terminal unit attached to the base block by a gas-specific interface which contain the gas-specific connection point. Materials: Brass EN CuZn39Pb3 luminium series 2000 or 6000 Steel NBR ISI P/POM GSS type 1L active c/w bulkhead plate DISTINCTIVE COLOUR VEG120/EN2 red magenta Ø 10 (supply) Supplied with: - adjusting screw for setting following the standard EN ISO green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB 16 (evacuation) Ø65 ØB 47
25 Ø50 20 Ø 15 GSS type 1L active for ceiling pendants DISTINCTIVE COLOUR Ø VEG120/EN3 red magenta 10 (supply) Ø65 Supplied with: - adjusting screw for setting following the standard EN ISO green suction indicator. - sleeve that can be custom made on request. - adapter for connecting the exhaust copper pipe or flexible hose. Box for GSS active outlet DISTINCTIVE COLOUR RL BOX-GSS red BOX-GSS/001 verde 6019 BOX-GSS/002 BLUE 5015 BOX-GSS/003 GREY 7035 EN ISO GSS probes BOX-GSS/004 beige 1013 These are the male non-interchangeable parts to be connected to the outlets. Materials: luminium series 2000 or 6000 anodized GSS 1L TYPE BOX Box without lid suitable for GSS outlets 85 37,5 69 BOX-GT Suitable to be either flush-mounted or surface-mounted Supplied with: - service cap; - components designed to link the boxes to form a series. Ø G Barb end type 1L GSS indicator DISTINCTIVE COLOUR D ØG E IEGG120-PG22/EN red magenta E LINDRR4 D 48 49
26 ENV outlet for ceiling pendants Ø15 IEGG120-PG22/EN 9 Ø36 82 Ø70 Ø70 Ø ,5 ENV outlet c/w copper pipes VM737-TL 9 Ø8 Ø15 55,5 IR Motor ENV This terminal unit integrates a medical tool drive outlet with a gas scavenging terminal unit. ENV barb end probe 163 Materials: Brass EN CuZn39Pb3 nickel plated Steel NBR nodized luminium IM737-PG6 9 Ø
27 dapters for ambulances Materials: Brass EN CuZn39Pb3 NBR/EPDM ISI BS/POM luminium 53
28 24 dapter with one FNOR NF S socket and barb end inlet dapter with four FNOR NF S sockets and barb end inlet GTF-1V-PG6-V 6 VCUUM GTF-4V-PG6-O 6 OXYGEN ,5 24 dapter with two FNOR NF S sockets and barb end inlet dapter with one SS socket and barb end inlet GTF-2V-PG6-O 6 OXYGEN GT-1V-O 6 OXYGEN GTF-2V-PG6-V 6 VCUUM dapter with three FNOR NF S sockets and barb end inlet dapter with two SS sockets and barb end inlet GTF-3V-PG6-O 6 OXYGEN GT-2V-O 6 OXYGEN
29 68 21 dapter with two DIN sockets and barb end inlet dapter with one BS socket and plastic box c/w barb end inlet 66,5 GTD-2V-O 6 OXYGEN ZBOX-GVBS-O OXYGEN GTD-2V-4 6 IR ZBOX-GVBS-4 IR dapter with four DIN sockets and barb end inlet dapter with one SS socket and plastic box c/w barb end inlet 66,5 GTD-4V-O 6 OXYGEN ZBOX-GV-O OXYGEN 190 GTD-4V-4 6 IR ZBOX-GV-4 IR dapter with one DIN socket and plastic box c/w barb end inlet ZBOX-GV-O ZBOX-GV-4 OXYGEN IR 56 57
30 NEWS 2016 FLOW-METER 59
31 FNOR NFS /FD S BS 5682:2015 SCLE SCLE IGTF-0-FL4 0-4 l/min IGTB-0-FL4 0-4 l/min IGTF-0-FL5 0-5 l/min IGTB-0-FL5 0-5 l/min 9/16 9/16 ENV DIN SCLE SCLE IGTE-0-FL4 0-4 l/min IGTD-0-FL4 0-4 l/min IGTE-0-FL5 0-5 l/min IGTD-0-FL5 0-5 l/min 9/16 9/16 SS UNI 9507 SCLE SCLE IGT-0-FL4 0-4 l/min IGT60-0-FL4 0-4 l/min 9/16 IGT-0-FL5 0-5 l/min IGT60-0-FL5 0-5 l/min 9/
32 DIN mini socket male threaded Ø 41,5 Ch27 VGTD-O-M1/4 1/4 OXYGEN VGTD-4-M1/4 1/4 IR Ø VGTD-V-M1/4 1/4 VCUUM VGTD-P-M1/4 1/4 Nitrous oxide VGTD-C-M1/4 1/4 Carbon dioxide VGTD-O-M3/8 3/8 OXYGEN 9 26 DIN mini socket with barb end VGTD-O-PG6 6 OXYGEN 50,5 VGTD-4-PG6 6 IR Ch 27 SS mini socket male threaded 41 VGT-O-M10X1 M10x1 OXYGEN mini socket for FLOW-METER VGT-4-M10X1 M10x1 IR VGT-P-M10X1 M10x1 Nitrous oxide VGT-C-M10X1 M10x1 Carbon dioxide VGT-O-M1/4 1/4 OXYGEN VGT-4-M1/4 1/4 IR Ch 24 63
33 9 39 FNOR mini socket male threaded B Ø S mini socket male threaded L L VGTF-O-M1/4 6,5 1/4 OXYGEN VGTS-O-M1/4 1/4 47 OXYGEN Ø 25 VGTF-4-M1/4 6,5 1/4 IR VGTF-O-M3/8 10 3/8 OXYGEN Ch23 VGTF-4-M3/8 10 3/8 IR VGTF-V-M3/8 10 3/8 VCUUM L BS mini socket male threaded UNI mini socket male threaded L L L VGTBS-O-M1/4/V 1/4 60 OXYGEN VGTI60-O-M1/4 1/4 56 OXYGEN VGTI60-O-M3/8 3/8 41 OXYGEN L dapter with one UNI 9507 socket c/w F1/8 thread inlet L JIS mini socket male threaded L VGTJS-O-M1/4 1/4 54,5 OXYGEN L GT-F1/8-O 1/8" 70 OXYGEN GT-F1/8-V 1/8" 70 VCUUM GT-F1/8-4 1/8" 70 IR GT-F1/8-P 1/8" 70 Nitrous oxide 64 65
34 NOTE: Flexible hoses for medical gas Flexible hose for EN ISO 5359 assemblies DISTINCTIVE COLOUR NTPB6x12-O WITE OXYGEN NTPB8x14-V YELLOW VCUUM NTPB6x12-4 WITE-BLCK IR NTPB6x12-P BLUE Nitrous oxide NTPB6x12-C GREY Carbon dioxide NTPB6x12-NC BLCK - 50 meters coil. Without DEP. 66
35 NOTE: NOTE:
36
37 Pres Block S.p.. Via lpignano, Caselette (TO) Italia tel fax The products described herein, including without limitation, product features, specifications, designs, availability are subject to change by Pres Block at any time without notice.
MEDICAL GAS OUTLETS. l DIN l BS 5682:1998 l BS 8532:2011. l SS l AFNOR NF S / FD S l AS 2896 l JIS T 7101
2 0 1 5 MEDICL GS OUTLETS l DIN 13260-2 l BS 5682:1998 l BS 8532:2011 l SS 875 24 30 l FNOR NF S 90-116 / FD S 90-119 l S 2896 l JIS T 7101 l UNI 9507 l ENV 737-6 l EN 15908 l GSS EN ISO 9170-2 l IR MOTOR
More informationMEDICAL GAS OUTLETS. Medical
Medical MEDICL GS OUTLETS DIN 13260-2 BS 5682:2015 SS 875 24 30 FNOR NF S 90-116 / FD S 90-119 S 2896 JIS T 7101 SNS 1409:2015 UNI 9507 ENV 737-6 EN 15908 SDEG EN ISO 9170-2 IR MOTOR SUMMRY Gas outlets
More informationMedical MEDICAL GAS OUTLETS
Medical NEW 2018 RNGE MEDICL GS OUTLETS DIN 13260-2 BS 5682:2015 SS 875 24 30 FNOR NF S 90-116 / FD S 90-119 S 2896 JIS T 7101 SNS 1409:2015 UNI 9507 ENV 737-6 EN 15908 SDEG EN ISO 9170-2 IR MOTOR SUMMRY
More informationTechnical Datasheet. SP Terminal Units. Classification. Services. Terminal Block. Check Valve Assembly. Tailpipe Options
SP Terminal Units Pneumatech MGS East & Zeus SP terminal units provide a safe means of supplying medical equipment with medical gases from the central gas supply system. They are manufactured to accept
More informationDECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY OUTLETS FOR COMPRESSED MEDICAL GASES AND VACUUM AND FOR ANAESTHETIC GAS SCAVENGING SYSTEMS
DECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY OUTLETS FOR COMPRESSED MEDICAL GASES AND VACUUM AND FOR ANAESTHETIC GAS SCAVENGING SYSTEMS whose codes are specified in the attachment, to the essential
More informationCEGA FORANO BY GREGGERSEN
CEGA FORANO BY GREGGERSEN PRODUCT CATALOG FORANO Terminal Unit According to DIN EN ISO 9170-1 GENERAL According to national and international standards, The unit is used to withdraw compressed gases and
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationPRECISION UK Ltd. Medical Gas Outlet BS Standard
Contents Page Section No. Product Description General 1 First Fix Assembly 1.2 Check Valve Assembly 1.3 Second Fix Assembly 1.4 Operation General 2 Probe Connection/Disconnection 2.2 Safety General 3 Installation
More informationFLEXIBLE PENDANTS with Axis MEDICAL GAS TERMINAL UNITS
FLEXIBLE PENDANTS with Axis MEDICAL GAS TERMINAL UNITS Phoenix Pipeline Products Limited. Unit 8, McKenzie Industrial Park, Tel No.: 44 (0) 161 428 7200 Bird Hall Lane, Fax No.: 44 (0) 161 428 7010 Stockport,
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationAxis MEDICAL GAS TERMINAL UNITS
Axis MEDICAL GAS TERMINAL UNITS Phoenix Pipeline Products Limited. Unit 8, McKenzie Industrial Park, Tel No.: 44 (0) 161 428 7200 Bird Hall Lane, Fax No.: 44 (0) 161 428 7010 Stockport, Email: info@p3-phoenix.com
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationTechnical Specification
Technical Specification Agss Plant Product Description Active anesthetic gas scavenging systems should be designed to safely remove exhaled anesthetic agents from the operating environment and dispose
More informationTA-Mini-Fast-Fit. Prefab units Fabricated solutions for small terminal units
TA-Mini-Fast-Fit Prefab units Fabricated solutions for small terminal units IMI TA / Control valves / TA-Mini-Fast-Fit TA-Mini-Fast-Fit Compact pressure independent solution for modulating or on/off control.
More informationDISPOSITIVI, SISTEMI E IMPIANTI PER L EVACUAZIONE DEI GAS ANESTETICI DEVICES, SYSTEMS AND PIPELINE SYSTEMS FOR ANAESTHETIC GAS SCAVENGING
DISPOSITIVI, SISTEMI E IMPIANTI PER GAS TECNICI, PURI, MEDICINALI E VUOTO DEVICES, SYSTEMS AND PIPELINE SYSTEMS FOR INDUSTRIAL, PURE, MEDICAL GASES AND VACUUM dmed DISPOSITIVI, SISTEMI E IMPIANTI PER L
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationAt Amico Labs we are dedicated to continued growth while producing products of outstanding quality, and providing excellent service.
1 ABOUT US Amico Corporation is a leading manufacturer of Medical Equipment, selling its products through a global distribution channel from three manufacturing facilities in Canada and the U.S. With a
More informationAxis AGSS TERMINAL UNITS
Axis AGSS TERMINAL UNITS. Unit 8, McKenzie Industrial Park, Tel No.: 44 (0) 161 428 7200 Bird Hall Lane, Fax No.: 44 (0) 161 428 7010 Stockport, Email: info@p3-phoenix.com U.K., SK3 0SB www.p3-phoenix.com
More informationManifolds HGM2 SERIES AUTOMATIC MANIFOLD
HGM2 SERIES AUTOMATIC MANIFOLD Features NFPA 99-2002 Permanently attached end connections on pigtails Copper pigtails for Oxygen service Internal dual-line regulator assembly Automatic change-over system
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationOperating Manual. LKHSP Self-Priming Centrifugal Pump IM70818-GB
Operating Manual LKHSP Self-Priming Centrifugal Pump NOTE! This is an appendix to Operating Manual IM 70737 for LKH Centrifugal pump. The appendix must be used in connection with IM 70737 to ensure correct
More informationSOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More informationDOMESTIC LPG REGULATORS & ACCESSORIES MOVABLE TANKS TANK INSTALLATION CONNECTED WITH MANIFOLDS
MOVABLE TANKS Room volume < 10 m 3 Forbidden Room volume from 10 up to 20 m 3 Max 1 tank up to 15 Kg Room volume from 20 up to m 3 Max 2 tanks up to 20 Kg total Room volume from > 50 m 3 Max 2 tanks up
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationConnectors Content. Connectors at a glance Screw connectors and plug-in connectors - Standard
Connectors Content Connectors at a glance... 264 Screw connectors and plug-in connectors - Standard... 266 Screw connectors and plug-in connectors - self-extinguishing... 276 Screw connectors and plug-in
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More informationTECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
More informationInstallation and Maintenance Manual. Medical Gas Outlet. British Standard Compatible
Installation and Maintenance Manual Medical Gas Outlet British Standard Compatible w w w. a m i c o. c o m Table of Contents Product Description 3 Cleaning and Lubrication 3 Inspection and Testing 4 Installation
More informationIMMERSION HEATERS METRIC
IMMERSION HETERS METRIC INDEX Screw plug tubular heaters m45x200 pag. 04-06 Screw plug tubular heaters m77x200 pag. 07-11 with thermowell pag. 12-13 Screw plug tubular heaters 1 1/2 pag. 14 00-03 - 0515
More informationFeatures PNEUMAT IC VALVES. Pneumatic valves Vip - Pneumatic coaxial valve GENERAL FEATURES CONTROL MEDIA OPERATING MEDIA
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationPressure Switch with Gauge for Pressure
Pressure Switch with Gauge for Pressure General Specifications: Pressure Gauge Assembly for the medical gas alarm system shall incorporate a U.L. Listed single pole double throw snap-action micro switch.
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationGroup 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
More informationPneutronics. Miniature Proportional Valves. Catalog PND-MPV-001/US January 2007
Pneutronics Miniature Proportional Valves January 2007 Non-Thermally Compensated Proportional Valve HF 200 Miniature Ultra High Flow Proportional Valve HF 200 is a high flow proportional valve that provides
More informationInstallation and Maintenance Manual. Medical Gas Outlet. British Standard Slim Style Compatible
Installation and Maintenance Manual Medical Gas Outlet British Standard Slim Style Compatible w w w. a m i c o. c o m Table of Contents Product Description 3 Cleaning and Lubrication 3 Inspection and Testing
More informationI23 RD P 16N 00
Sandwich Pressure Regulators ISO 1; ISO 2 and ISO 3 Series Overview How to Order: (example) I23 RD 1 00 0 P 16N 00 Regulator Port Series Size I12 = ISO 1 1/4 I23 = ISO 2 3/8 I34 = ISO 3 1/2 Regulator Type
More informationBZ40. Dal 1901 COD
COD. 9901.09 REV.00 POS CODE TABLE 1 Mod. PM DESCRIPTION 1 0709LW CUPS-HEATER GRID 7817801 SCREW TPS M X 1 18 WASHER FOR SPRING D H OT NICKEL-PLATED 01 ASSEMBLY CUPS-HEATER 91 ASSEMBLY BODY STAINLESS STEEL
More informationVSO - MI thermally compensated proportional valve
The VSO - MI is a miniature proportional valve specifically designed for medical device manufacturers and incorporates thermal compensation to provide precise flow control and stability over a wide operating
More informationTECHNICAL CATALOGUE GAS BALL VALVES: BERLIN
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationDIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationCEGA SYSTEMS BY GREGGERSEN
CEGA SYSTEMS BY GREGGERSEN PRODUCT CATALOG SWITCHOVER SYSTEMS SWITCHOVER SYSTEMS MediControl switchover system INTRODUCTION Overview APPLICATION EXAMPLES Care and caution are advised when handling compressed
More informationSuction Spares and Accessories 2009
MUL91600101 Black Rubber Feet for Machined Base Plates, (Pack of 5) MUL8150038 Black Rubber Feet for Machined Base Plates, (Pack of 4) b MUL94004000 Illuminated Green Rocker Switch (L30mm x W25mm x D30mm)
More informationSeries RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
More informationAV 23 Balancing valves SETTER Inline
AV Balancing valves SETTER Inline Application Direct reading and balancing valve with visual flow indication. Correct balancing of circuits ensure optimum efficiency of the system and can therefore help
More informationMacro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
More informationTECHNICAL CATALOGUE BALL VALVES: PARIS
TECHNICAL CATALOGUE BALL VALVES: PARIS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More information7625 West New York Street Indianapolis IN Phone: Fax: Order Desk:
7625 West New York Street Indianapolis IN 46214-4911 www.floteco2.com Phone: 317-273-6960 Fax: 317-273-6979 Order Desk: 800-401-1723 e-mail: flotec@floteco2.com Order Desk Fax: 1-800-515-9254 Bags (straight
More informationRIGID PENDANT. Phoenix Pipeline Products Limited. Installation, Operation and Maintenance Manual
RIGID PENDANT Phoenix Pipeline Products Limited. Unit 8, McKenzie Industrial Park, Tel No.: 44 (0) 161 428 7200 Bird Hall Lane, Fax No.: 44 (0) 161 428 7010 Stockport, Email: info@p3-phoenix.com U.K.,
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS 2012 2 The CALEFFI SOLAR product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More informationSeries RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
More information1/ 8 Male to 4mm tube. PC-04-¼ ¼ Male to 4mm tube. M5 Thread to 6mm tube. 1/ 8 Male to 6mm tube. PC-06-¼ ¼ Male to 6mm tube PC-06-3 / 8
Chapter 8 87 Fittings FITTINGS MALE TO TUBE STRAIGHT PC-04-1 / 8 1/ 8 Male to 4mm tube PC-04-¼ ¼ Male to 4mm tube PC-04-M5 M5 Thread to 4mm tube PC-06-1 / 8 1/ 8 Male to 6mm tube PC-06-¼ ¼ Male to 6mm
More informationBürkert Supplement program
ürkert Supplement program Subject to change Design changes can lead to changes in pricing Technical Specifications The technical data in the ordering tables have minimum specifications. or complete information
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS The Caleffi Solar product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More informationQuick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA July 202 Locations Grantsburg, WI Chetek, WI FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS
More informationSpare Parts Catalog. ACE Series Automatic Coffee Brewer: Glass Decanter, Thermal Carafe, Thermal Dispenser, & Thermal Airpot ACE-LP ACE-TC ACE-TD
ACE-LP ACE-S ACE-TC ACE-TD ACE-TS ACE-LD ACE-AP Spare Parts Catalog 18-Oct-18 NEI 1.800.325.7867 www.newcocoffee.com P a g e 1 Flow Control Information for PDS [Legacy (Old Style) - PN: 110305] 18-Oct-18
More informationTECHNICAL CATALOGUE AUTOMATIC AIR-VENT VALVES
TECHNICAL CATALOGUE AIR-VENT VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationLinea - Line. raccordi a compressione compression fittings
5300 Linea - Line raccordi a compressione compression fittings Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary
More informationLow Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
More informationDynacon. Floor Heating Manifolds Floor heating manifold with automatic flow control
Dynacon Automatic Flow Control Floor Heating Manifolds Floor heating manifold with automatic flow control IMI HEIMEIER / Floor Heating Control / Dynacon Dynacon Dynacon adjusts the flow rate in the individual
More informationkythe Premium Pump for Air and Gas Applications
. kythe Premium Pump for Air and Gas Applications LKHSP Self-priming Centrifugal Pump Application The LKHSP self-priming centrifugal pump is specially designed for pumping liquids containing air or gas
More informationTA-6-way valve. Standard control valves 6-way valve for change-over systems
TA-6-way valve Standard control valves 6-way valve for change-over systems IMI TA / Control valves and Actuators / TA-6-way valve TA-6-way valve The 6-way valve solution enables various control set-ups
More informationInstrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More information2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
More informationDe-Scaling 44
01. Mould cooling & Flow 01.1 Couplers 5 01.2 Hoses 23 01.3 Fittings & Valves 28 01.4 Push In Fittings 37 01.5 Manifolds 39 01.6 Flow Control 41 01.7 De-Scaling 44 01.8 Pressure Testing 46 01.9 Sealant
More informationCOMPACT RACK TYPE DISHWASHER
SPARE PARTS CATALOG ELECTROLUX PROFESSIONAL COMPACT RACK TYPE DISHWASHER 44 66 Models Affected: Electrolux Part Number Description 534034 ECRT66R208 534035 ECRT66L208 534036 ECRT66R240 534037 ECRT66L240
More informationMICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D..65 to 9.5 mm U / Series 84 FEATURES Solenoid valve suitable for cutting off the flow of a fluid by pinch For sterile, aseptic, physiological
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationLIST OF PUBLISHED STANDARDS
Report : 08-05-0 Page o : Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 08:0.0 The design and installation of compressed natural gas (CG) vehicle filling stations 0-0-0 0-0-0
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationPilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Page 1 of 7 TI-P107-01 CH Issue 10 Cert. No. LRQ 0963008 ISO 9001 Pilot Operated Pressure Reducing Valves with Stainless Steel odies Description The pilot operated pressure reducing valves have been manufactured
More informationService Manual Gemini, Diamond II and Diamond III Medical Gas Outlets for Concealed Piping and Console Applications
Service Manual Gemini, Diamond II and Diamond III Medical Gas Outlets for Concealed Piping and Console Applications MAN0-049 Part number 847706-00 Rev. C00 Table of Contents General Product Description...
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationOutlets and Accessories
Service Manual Series B Quick-Connect and Diameter-Index Safety System Outlets and Accessories MAN0-03 Part No. 803-00 Rev. D Pg. Table of Contents General Product Description...3 Tools and Service Materials...
More informationFOR HEATING & PLUMBING SYSTEMS
Quality Plastics Ltd. Pushfit Option Compression Option MANIFOLD SYSTEM ADVANTAGES: Central Control. Eliminates variations in pressure and flow. Individual pipes to each outlet allowing separate shut-off
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationInstrumentation Products. Mini Valves and Rupture Disc Holders
Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental
More informationCTE8000 / CTU8000 Series
CTE8000 / CTU8000 Series FEATURES 250 mbar to 100 bar, 5 to 1500 psi gage1 or absolute10 pressure 0...5 V, 0...10 V or 4...20 ma output Field interchangeable For many industrial gases and liquids EMC according
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationPRECISION UK Ltd DUPLEX AGSS PLANT
DUPLEX AGSS PLANT Contents Page Section Page Product Description General 3 AGSS Plant 3 AGSS Remote Switch 3 Operation General 4 Safety General 5 Installation General 5 Mechanical 5 Electrical 7 Wiring
More informationTABLE OF CONTENTS MICROMAX TM 17E DESCRIPTION (2)
00-0 00-0 TABLE OF CONTENTS MICROMAX TM E DESCRIPTION PLAN GENERAL VIEW TANK SYSTEM CHASSIS SYSTEM SOLUTION SYSTEM SQUEEGEE ASSEMBLY BRUSH SYSTEM CONTROL PANEL SYSTEM WIRING SYSTEM WIRING DIAGRAM RECOMMENDED
More informationGemini, Diamond II and Diamond III Medical Gas Outlets for Concealed Piping and Console Applications
Service Manual Gemini, Diamond II and Diamond III Medical Gas Outlets for Concealed Piping and Console Applications Andersen Medical Gas Place Lafitte Madisonville, LA 70447 http://www.themedicalgas.com
More informationDIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationFE-1000 INSERTION TYPE AIRFLOW SENSING ELEMENT
Technical Data Sheet FE-1000 INSERTION TYPE IR SENSING ELEMENT DESCRIPTION The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationTemperature sensor type T.3., Construction type 3, plug-in sensor for protection tube with lateral cable outlet (Pt100/Pt1000, NTC)
Temperature sensor type T.3., Construction type 3, plug-in sensor for protection tube with lateral cable outlet (Pt100/Pt1000, NTC) Measuring principle Temperature range Protection class Mounting Material
More informationSpecial valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationMedical Gas Outlet Adaptor, Fitting and Hose Catalog
2018 Medical Gas Outlet Adaptor, Fitting and Hose Catalog For Clinical Engineering, Biomedical, and Respiratory, Departments 11300 Sanders Drive, Suite 1 Rancho Cordova, CA 95742 (916) 853-1222 Fax (916)
More informationOIL FILLER AND AIR BREATHER FILLER CAPS
OIL FILLER ND IR RETHER FILLER CPS The complete series of oil filter and makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. s perform
More informationHyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
More informationInstrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More information