VIALLI PRODUCT CATALOGUE PEX PIPES & FITTINGS. Hamburg - Germany

Size: px
Start display at page:

Download "VIALLI PRODUCT CATALOGUE PEX PIPES & FITTINGS. Hamburg - Germany"

Transcription

1 Hamburg - Germany VIALLI PEX PIPES & FITTINGS PRODUCT CATALOGUE

2 VIALLI PEX PIPES & FITTINGS VAILLI Cross- Linked Polyethylene (PEX) Pipes & Fittings Vialli PEX is one of the Germany Product Produced by Almanit Sanitry Gmbh- Hamburg- Germany, which has long experience for manufacturing different types of Pipes System. Vialli PEX pipe produced according to German DIN 16892, DIN Standards defined required Cross-link Degree Depending on the Crosslink method. The higher cross-linked Degree increases the material s Strength. That helps it to be resistant to higher pressure and tempera ture Vialli PEX pipes allow the Distribu on of pressurized hot & cold water both sanitary and hea ng system. The techniques of water distribu on using PEX pipes present many advantages in comparison to the tradi onal distribu on systems using iron or copper pipes. The Vialli PEX pipe is made from carefully selected raw material supplied by the best resin manufacturers. Vialli PEX pipes are produced and approved as per European Water Regula ons Advisory Scheme (WRAS) The Cross-Linking Process Vialli PEX pipe is a High density polyethylene pipe. The polyethylene consists of long macromolecules, which are cross-linked together by transverse bond in the cross-linking process. This process guarantees high mechanical. Thermal and chemical resistance value for the polyethylene pipes. Therefore Vialli PEX pipe are able to transfer hot and cold water under pressure for long period of me. 1

3 FREQUENTLY ASKED QUESTIONS Q: Which is the raw material used to produce VIALLI PEX Pipe system? A: Vialli using Borealis raw material to produce PEX pipes under DIN & DIN Q: What are production standards of VIALLI PEX? A: Following standards are used for the produc on of VIALLI pipes and ngs: Standard Concern Produc on DIN Cross linked high-density polyethylene PEX pipes - General quality requirements and tes ng DIN Cross linked high-density polyethylene PEX pipes Dimensions Q: What is the service life (life span) of VIALLI PEX piping system for different pressure groups? A: PEXa pipes have a service life of 50 years according to DIN Standards for in house applica ons. To have detailed informa on for Different temperatures and pressure rates, please refer to page No. 7 Q: Are VIALLI PEX pipes used for drinking water? Are they Hygienic/ Healthy? A: PEX products can safely be used for Drinking water. VAILLI PEX products have got all interna onal Approvals as well as the approvals of the sales territories. Q: How is the pipe cutting recommended? A: It is advised to used sharp cu ng tools to cut the pipe with no burrs, VIALLI Provide cu ng tools. Q: How is the size of pipes and fittings measured? A: Pipes size is measured by mm (millimeter) of its outer Dia. PEX ngs are measured by mm (millimeter) of inner dia. and metal threaded ngs treaded side size is measured in inches. Q: Are VIALLI PEX compression fittings reusable? A: YES It is so Easy to disconnect the ngs and do the required maintenance and reconnect it again. Q: Is there a possibility of over or under-tightening the fitting? A: If you follow the instruc ons above, the risks of over- or under- ghtening are very small. Since all systems must be pressure tested prior to being put into use, it is possible to ghten the ng more if there s a leak at the connec on point. In order to avoid over- ghtening the compression nut, do not use excessive force and wrenches larger than indicated when installing the ng. Q: I see that the brass O-ring is split - is it normal? A: Yes. When the compression nut is ghtened, the open ends of the O-ring come together, exer ng pressure upon the Vialli PEX pipe, allowing it to be compressed over the ng's barbs. Q: What purpose do the black rubber O-rings over the fitting's barbs serve? A: The O-rings are intended to prevent water leakage. The main purpose of the barbs is to prevent the ng from popping out under pressure from the pipe. The O-rings should not be removed from the fi ng, nor is it necessary to lubricate them in any way. 2

4 1. Fields of Applications Vailli PEX pipes are used for: Hot and Cold water Supply using the Pipe in Pipe Technique with Manifolds. Hot and Cold water Supply using the Pipe in Pipe Technique with PPR mains Traditional water supply Systems. 2. Vialli PEX Advantages Easy and fast Installation Easy inter exchangeable the inner pipe in case of failure. High Temperature & pressure resistant. Hygienically safe High Aging stability No Corrosion Does Not affect from acids Low friction coefficient Flexible 3. Types of installation 3.1 Double pipe Installation 3.2 Single Pipe Installation 3

5 4. Polyethylene Cross Linked Water Supply System 4.1 Pipe in Pipe syst em using manif olds: This systems has been inspired from the parallel electricity distribu on systems, as each tap is supplied with two pipes, one for hot and the other for cold water directly from manifolds. The hot and cold water manifolds are installed in a cabinet embedded into the wall (Fig. 3) or directly fixed on the wall above the false ceiling (Fig.4). The hot and cold water taps involved in each circuit respec vely. 4

6 4.2 Pipe in Pipe system using PPR Main Headers: In this system, the taps are supplied with hot and cold water using PEX pipes running inside corrugated conduits, directly from the PPR main installed above the false Ceiling (Fig. 5) This system combines the advantage of pliability and possibility of easy replacement of the damage pipes. 5. Types of PEX pipes Standard PEX Typ. Defini on Cross linked Degree DIN PEXa Pipes cross-linked with peroxide 80-85% DIN PEXb Pipes cross-linked with Hydro silicon 75-80% DIN PEXc Pipes cross-linked w/ add n E-bombing 60% DIN PEXd Pipes cross-linked with Peroxide 60% 1.1 PE-Xa Formed with the peroxide that is made into the raw material during the extrusion. Peroxide is the chemical that is ac vated by heat forms free from radicals from the cross-link. These kind of pipes are called PE-Xa cross-link pipes. 1.2 PE-Xb Connected crossly to the polyethylene Xi an with hydro silicon during and a er the process. These kinds of pipes are called PE-Xb cross-link pipes. 1.3 PE-Xc Radia on (electron bombarding) is applied to the polyethylene to maintain cross-linked chains. These kinds of pipes are called PE-Xc cross-link pipes. 1.4 PE-Xd The pipes that are maintained by cross linking the chains at the Azo (nitroamine) environment are called PE-Xd cross-linked pipes 5

7 6. Basic points to be considered in order to have safe and problem free mounting. a) Take in considera on of replacement in case of failure and mount horizontally and avoid the sharp twist while moun ng. b) To avoid the damage from the metals like screw thread, remember to make the pipe s coordinates that go through a closed area. c) Install the pipes at temperature that is over the freezing point. d) In order to avoid rust or powder get into the pipes, keep the ends closed un l the installa on is finished. e) Keep the conjunc ons points open in order to make adjustments. f) Do not cover the system un l the tests are preceded. g) Do not exposed pipes to direct sunlight. h) Pass a produc ve sheath under the alum. This protec ve sheath will also act like an airbag and help heat isola on. i) Be careful of protec on sheath being in spiral form in order not to cause cross on narrowing in order to determine the incoming and outgoing water direc ons, used red protec ve sheath for hot water and blue cold water. 7. Technical Data 7.1 Vialli PEX Technical Properties Property Temp. Standard Value Unit Density DIN g/cm 3 Breaking off Resistance 20 C DIN Kg/cm 3 Impact Strength DIN No Break Mn.j.mm 3 Breaking off Elonga on 20 C DIN % 100 C DIN % Elas city Module DIN N/mm 2 Surface Resistance DIN Ω >10 12 Opera ng Temperature Liner Expansion coefficient 20 C 100 C DIN DIN C C+100 C 1.4x 10-4 C 2.05x 10-4 C So ening Temperature 135 C Heat Conduc vity DIN Pr W.K - 1.m - 1 Specific Heat 0.50 Cal/gr 6

8 7.2 Operating Pressure Table O.D Thickness Density (PN20) Kg/m Vialli PEX Behavior According to DIN under Long-Term Stressing. The Service life of Vialli PEX depends on the Internal hoops Stress over Time Subject to Temperature. = px[ds] 20xs s= hoop Stress [N/mm2 or MPa] P= Internet Pressure (Bar) D= Outer Diameter of Pipe mm S= Wall Thickness of Pipe 7.3 Permissible Working Pressure of Vialli PEX Pipes (DIN 16893) With safety factor 1.2 Service Life Year Temperature ( C) Pressure Rate / Bar PN

9 8. Vialli DZR Brass FITTINGS 8.1 ) GENERAL INFORMAT ION Dezincifica on resistant brass (DZR Brass) is essen ally a leaded arsenical brass with a duplex structure. As its name suggests it was originally developed to provide good resistance to dezincifica on type corrosion which is experienced by normal hot working brasses. As well as the improved dezincifica on also offers good strength levels, is readily machined and easily hot forged. Its primary usage over the years has been for water ngs that are produced by hot stamping and machining Designed for use with compression compliance. ngs (offered separately), that are manufactured in 8. 2) MANUFACTURING TECHNOLOGIES Brass parts and components can be cas ng, forging, hot extrusion and cold drawing. 8.3 ) MECHANICAL PROPER TIES Forging Brass Alloy Physical Proper es Snerv Car. Ro. N/mm 2 N/mm 2 Allung % Durezza HB CW617N H080 >(120) >(360) >(20) >(80) Brass Bar Alloy Physical Proper es Snerv Car. Ro. N/mm 2 N/mm 2 Allung % Durezza HB CW614N R500 (390) >500 >8 (150) CW614N R430 (250) >430 >10 (120) 8

10 8.4 ) MACHINABILITY The workability and adaptability of brass to the automa c machines makes it one of the most used material in the Fi ngs business. The high cu ng speed reduces the manufacturing meline reducing evidently, the produc on cost. The components surface is smooth allowing finishing process as polishing and coa ng at a very reasonable price. 8.5 ) CORROSION RESISTANCE The brass has excellent resistance to corrosion when it is used in hydro thermo sanitary systems. Water with high concentra on of chlorine can put under stress the brass and cause corrosion. This phenomenon is called dezincifica on: selec ve leaching of zinc from brass alloys. Containing more than 15% zinc in presence of oxygen and moisture. In this par cular case is be er to use a Dezincifica on resistant brass (DZR). The DZR, (CunZN36Pb2asCW602N), material has been developed for using pipe ngs with potable water. 8.6 ) METAL RESIDUES IN DRINKING WATER The percentage of lead in DZR Brass is considerably low, so all DZR Brass components are designed to respect the highest health and safety standards. 9

11 9. Vialli Bronze-Gun Metal- FITTINGS 9.1) GENERAL INFORMATION Bronze is one of the oldest metal alloys, consis ng primarily of copper, usually with n as addi ve. Composi ons vary, but most modern bronze is 88% copper and 12% n. Bronze may also contain manganese, aluminum, nickel, phosphorus, silicon, arsenic, or zinc Vialli Bronze ngs provide a ght seal when installed correctly. Vialli Bronze ngs are used in many applica ons including plumbing, hea ng systems, hot water plumbing, pneuma c and marine type construc on. The Vialli Bronze ngs are resistant from harmful effects of corrosion when in contact with fresh or salt water, that is polluted with mineral acids. Vialli Bronze-Gun Metal PEX pipe ngs are the best durable Choice 9.2) MANUFACTURING TECHNOLOGIES Parts and components can be obtained only by cas ng or by a mechanical process of semifinished metal removal coming from cas ng. Therefore the result is a rough and uneven surface. 9.3) MECHANICAL PROPERTIES Forging Bronze Alloy Physical Proper es 9.4) MACHINABILITY The bronze, despite the presence of lead has a capacity of adap ng to automa c machine. The components surface, par cularly the one manufactured by cas ng, presents some imperfec ons and roughness, which cause pressure drop. The galvanic treatment leaves the surface less bright and polished. 9.5) CORROSION RESISTANCE Snerv Car. Ro. N/mm 2 N/mm 2 The bronze has, general a very good resistance to the corrosion. The bronze has a tolerance to the corrosion cracking, but it is totally exempt from this phenomenon 9.6) METAL RESIDUES IN DRINKING WATER Allung % Durezza HB CW617N Fuso >(90) >(220) >(16) (70) All Bronze components are designed to respect the highest health and safety standards. 10

12 10. Certificates 11

13 11. Recommendations He ng the pipe with naked flame or with any h ng element of high temperature should not be used, as this will damage the pipe and can cause It is a must to protect a visible pipe from ultra violet rays and Direct sunlight, as this may change the chemical- physical features of the PEX material and cause it to lose it characteris cs. Do Not Use with PEX Liquid-based leak detectors, adhesive tape, pipe dope, linseed oil, threading compound, pu y, mineral oil, petroleum products, metal pipe hangers. Leave Excess Tubing Leave extra tubing at the beginning and end of runs to simplify connec on to manifolds and end points and to make connec without straining the tubing or connec. Immediate connec to a manifold or trans on ngs and then making the run reduces the chance of cu ng tubing too short. Identify Tubing Runs Clearly and permanently mark each run at each end to iden fy the fixture it supplies (hot or cold water, bathroom sink, kitchen sink, basement toilet, etc). Do not apply adhesive labels to PEX pipe. PEX and Concrete Tubing installed within or under concrete slabs should be con nuous lengths of PEX tube. Do not install fittings beneath concrete. Minimum Bend Radius Do not bend tube too ghtly. The minimum recommended bend radius is six es the tube size (i.e. ½" tube = 3" bend radius). When making a 90 turn, use bend supports. Manifold Installation Warnings: Before and er install sure manifold is kept in a loc on with limited exposure to chemicals, paint, hazardous materials, debris, excessive heat, direct flame, or moving objects that could cause damage. The manifold should be located in an area that will not be covered permanently with sheetrock, plywood, or paneling. Manifolds should not be installed or kept in a loc on exposed to freezing temperatures. Do not use pipe dope or tape to seal any ngs on the manifold. Care should be taken not to over or under ghten fit ngs. Distribu nes must connect to the connec ng valves in a straight line perpendicular to the manifold as to avoid bending stress on the valves. The installer must also meet all qualific s required by the state and/or local administr ve authority administering the provisions of the code where PEX piping is installed. 12

14 Installation Recommendation Cut the pipe size Make sure the blade of the pipe is angled perfectly straight across the pipe. A clean straight cut makes sure it will connect properly to the ng. Choose the fittings Chose the correct fittings according to PEX pipe Dimension Sleeve the nut and olive Slide the nut over the pipe followed by the olive as indicated. Insert fitting body Check O-rings on the main body are intact and free of dirt. Insert the main body of the ng into the pipe. It should go in easily, if it is s then pipe. Is not fully beveled. Tighten with spanners Slide the nut, olive and ng together and Tighten off with spanners. This completes the fi ng. 13

15 PEX PRODUCTS 1.) PEXa Cross linked pipe Formed with the peroxide that is made into the raw material during the extrusion. Peroxide is the chemical that is ac vated by heat forms free from radicals from the cross-link. These kind of pipes are called PE-Xa cross-link pipes. Size Description Art. No. 16mm (1.8mm wall thickness) PEXa mm (2.0mm wall thickness) PEXa mm (2.2mm wall thickness) PEXa mm (2.3mm wall thickness) PEXa mm (1.9mm wall thickness) PEXa mm (2.0mm wall thickness) PEXa mm (2.5mm wall thickness) PEXa mm (2.8mm wall thickness) PEXa ) PEXb Cross linked pipe Connected crossly to the polyethylene Xi an with hydro silicon during and after the process. These kinds of pipes are called PE-Xb cross-link pipes. Size Description Art. No. 16mm (1.8mm wall thickness) PEXb mm (2.0mm wall thickness) PEXb mm (2.2mm wall thickness) PEXb mm (2.3mm wall thickness) PEXb mm (1.9mm wall thickness) PEXb mm (2.0mm wall thickness) PEXb mm (2.5mm wall thickness) PEXb mm (2.8mm wall thickness) PEXb

16 3.) Corrugated Conduit Corrugated Conduit is a flexible conduit which can be used in a host of different applica ons and add extra protec on also indicates the PEX pipe if it s hot (red) & cold (blue) Size Description Art. No. 25mm Corrugated Conduit (red) mm Corrugated Conduit (blue) mm Corrugated Conduit (red) mm Corrugated Conduit (blue) ) Female Elbow & Comp. Fitt. (DZR or Bronze) Elbow is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing Size Description Art. No. 16mm x 2.2 mm x ½ Female Elbow mm x 2.8mm x ½ Female Elbow mm x2.8mm x ¾ Female Elbow ) Elbow Casing Plastic box for holding Elbows for easy PEX tubing Connection Size Description Art. No. 25mm Elbow Casing mm Elbow Casing

17 6.) PEX MALE Adaptor (DZR or Bronze) A special adaptor to connect PEX pipe & Water Source Size Description Art. No. 16mm x 2.2mm x ½ PEX Adaptor mm x 2.8mm x ½ PEX Adaptor mm x 2.8mm x ¾ PEX Adaptor ) PEX Female Adaptor (DZR or Bronze) A special adaptor to connect PEX pipe & Water Source Size Description Art. No. 16mm x 2.2mm x ½ PEX Female Adaptor mm x 2.8mm x ½ PEX Female Adaptor mm x 2.8mm x ¾ PEX Female Adaptor ) Manifold with Valves (DZR or Bronze) PEX manifolds are a new method for residen al water distribu on, gaining acceptance in the home building industry. Manifold plumbing systems are control centers for hot and cold water that feed flexible PEX supply lines to individual fixtures. Size Outlet Art No. 16mm x 2.2mm x ¾ 2,3 & 4 outlet mm x 2.8mm x 1 2,3 & 4 outlet mm x 2.2mm x 1 ¼ 2,3 & 4 outlet mm x 2.8mm x 1 ½ 2,3 & 4 outlet

18 9.) Manifold (DZR or Bronze) PEX manifolds are a new method for residen al water distribu on, gaining acceptance in the home building industry. Manifold plumbing systems are control centers for hot and cold water that feed flexible PEX supply lines to individual fixtures. Size Outlet Art No. 16mm x 2.2mm x ¾ 2,3 & 4 outlet mm x 2.8mm x 1 2,3 & 4 outlet mm x 2.2mm x 1 ¼ 2,3 & 4 outlet mm x 2.8mm x 1 ½ 2,3 & 4 outlet ) Female End Cap-Manifold (DZR or Bronze) They are used to seal the female end of a manifold. Size Description Art No. ¾ Female End Cap Female End Cap ¼ Female End Cap ½ Female End Cap ) Male End Cap-Manifold (DZR or Bronze) They are used to seal the female end of a manifold. Size Description Art No. ¾ Male End Cap Male End Cap ¼ Male End Cap ½ Male End Cap

19

20

CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)

CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0) CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie MULTILAYER PIPING SYSTEMS I.S. EN ISO 21003-1:2008 NSAI Certified PRODUCT OVERVIEW

More information

Operating & Safety Manual

Operating & Safety Manual Operating & Safety Manual Pipe Cutter DN70, DN100 & DN150/ 3, 4 & 6 Pipe Cutter Ultra Flex DN70, DN100 & DN150/ 3, 4 & 6 I N S T R U C T I O N S These instruc ons are for your personal safety. Always ensure

More information

Hot and Cold Plumbing Manifold Systems

Hot and Cold Plumbing Manifold Systems Hot and Cold Plumbing Manifold Systems Hot and Cold Manifold Overview By using an Emmeti manifold system in a point to point plumbing configuration you can greatly reduce the number of joints in your system,

More information

CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)

CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0) CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie PRODUCT OVERVIEW NSAI Certified to EN ISO 21003 and WRAS approved. INSTANTOR Press

More information

VALSIR SUPPLY SYSTEMS MIXAL

VALSIR SUPPLY SYSTEMS MIXAL TECHNICAL DATA SHEET VALSIR SUPPLY SYSTEMS MIXAL The product Mixal is an extremely flexible multilayer pipe and is therefore ideal for the creation of floor, wall and ceiling radiant heating and cooling

More information

PRODUCT CATALOGUE EFFECTIVE FROM 1 ST JANUARY 2013 MULTI-LAYER PIPE & PRESS FITTING SYSTEM

PRODUCT CATALOGUE EFFECTIVE FROM 1 ST JANUARY 2013 MULTI-LAYER PIPE & PRESS FITTING SYSTEM PRODUCT CATALOGUE EFFECTIVE FROM 1 ST JANUARY 2013 MULTI-LAYER PIPE & PRESS FITTING SYSTEM PRESSTITE INTRODUCTION Introduction to Presstite Presstite Multilayer is a composite pipe system using the advantages

More information

PE-HDXc pipes (physically cross-linked polyethylene pipes)

PE-HDXc pipes (physically cross-linked polyethylene pipes) pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according

More information

SYSTEM KAN-therm Push Platinum

SYSTEM KAN-therm Push Platinum SYSTEM KAN-therm Push Platinum ISO 9001 TECHNOLOGY OF SUCCESS Contents Page System KAN-therm Push Platinum - General information... 3 Multi-layer PE-Xc/Al/PE-HD Platinum pipes... 5 Parameters of multi-layer

More information

FOR HEATING & PLUMBING SYSTEMS

FOR HEATING & PLUMBING SYSTEMS Quality Plastics Ltd. Pushfit Option Compression Option MANIFOLD SYSTEM ADVANTAGES: Central Control. Eliminates variations in pressure and flow. Individual pipes to each outlet allowing separate shut-off

More information

PLUMBING SYSTEMS PIPE & FITTINGS

PLUMBING SYSTEMS PIPE & FITTINGS PIPE & FITTINGS MLCP MultiLayer Pipe & Fittings By combining PE-RT and aluminium, a new technologically advanced material is formed, providing security and safety. Our Multitubo systems MLCP is designed

More information

LDW-HK. Deadweight Tester / Pressure Balance Hydraulic & Compact Design

LDW-HK. Deadweight Tester / Pressure Balance Hydraulic & Compact Design Deadweight Tester / Pressure Balance LDW-HK Rel. 20120820 Applica ons: Primary standard for defining the pressure scale in a range up to 1200 bar hydraulic Reference instrument for factory and calibra

More information

Edition 1

Edition 1 RAYPEX 800-628-5044 Edition 1 RELATIVE ORDER OF RESISTANCE TO GAS PENETRATION Impurity levels after six hours of flushing with helium 4.5 (100 1/h) Moisture (H20) Oxygen (O2) 1. Stainless Steel 1-2 ppm

More information

GRATIS - FREE OF CHARGE:

GRATIS - FREE OF CHARGE: Rel. 20150206 Applica ons: Primary standard for defining the pressure scale in a range up to 1200 bar hydraulic Reference instrument for factory and calibra on laboratories for the tes ng, adjustment and

More information

MODEL Model 55. Model 135 CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION. Rev 1/16 PN

MODEL Model 55. Model 135 CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION. Rev 1/16 PN MODEL 55 135 Model 55 Rated for motors up to 55 horsepower and 250 lbs. Model 135 Rated for motors up to 135 horsepower and 350 lbs. CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION

More information

Valve Lockouts. Valve lockouts are available to suit all types of valve including ball valve, gate valve, globe valve and plug valve.

Valve Lockouts. Valve lockouts are available to suit all types of valve including ball valve, gate valve, globe valve and plug valve. Valve lockouts are available to suit all types of valve including ball valve, gate valve, globe valve and plug valve. A well fi ed valve lockout will provide protec on against accidental or unauthorised

More information

PLUMBING SYSTEMS PIPE & FITTINGS

PLUMBING SYSTEMS PIPE & FITTINGS PIPE & FITTINGS MLCP MultiLayer Pipe & Fittings Our MLCP product offering By combining PE-RT and aluminium, a new technologically advanced material is formed, providing security and safety. Our Multitubo

More information

SYSTEM KAN-therm Push Platinum ISO 9001

SYSTEM KAN-therm Push Platinum ISO 9001 SYSTEM KAN-therm Push Platinum ISO 9001 Contents Page System KAN-therm Push Platinum - General information...3 System KAN-therm Push Platinum - Technical information...4 Multi-layer PE-Xc/Al/PE-HD Platinum

More information

Section 1 - Sanitary Manifolds

Section 1 - Sanitary Manifolds Topway SN WRAS approved nickel plated extruded brass manifold in ¾, 1 and 1¼ sizes, and DN20 outlets Available with ½ F outlets for connection to alternative pipe types Available in from 2 to 12 ways per

More information

TRIO APP & APS SERIES IMPACT CRUSHERS. High E ciency Crushing Solu ons

TRIO APP & APS SERIES IMPACT CRUSHERS. High E ciency Crushing Solu ons TRIO APP & APS SERIES IMPACT CRUSHERS High E ciency Crushing Solu ons TRIO o ers World Class Design, Engineering and Manufacturing to provide high value solu ons for your crushing, screening and material

More information

Catalogue technical information

Catalogue technical information Modern water and heating solutions SYSTEM KAN therm Catalogue technical information Steel and Inox Underfloor heating TECHNOLOGY OF SUCCESS ISO 9001 Contents Page SYSTEM KAN-therm Push/Push Platinum...1

More information

Table of Contents. SeaTechInc.com

Table of Contents. SeaTechInc.com Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick

More information

Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)

Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes

More information

GIACOGREEN Pipes and Fittings in Polypropylene Random

GIACOGREEN Pipes and Fittings in Polypropylene Random GIACOGREEN Pipes and Fittings in Polypropylene Random GIACOMINI s.p.a. 28017 S.Maurizio d Opaglio (Novara) Tel. 0322-923111 Fax 0322-96256 Telex 200035 www.giacomini.com dal 1951 January 2000 GIACOMINI,

More information

CATALOGUE. Metzerplas

CATALOGUE. Metzerplas CATALOGUE Metzerplas C E R T I F I C A T I O N 3 SP pipe is approved by standards institutes around the world Institute Certificate No. Product Standard Country IAPMO 4755 Pex-Al-Pex Composite pressure

More information

Bosch Dual Circuit Non-Pressurized Flow Centers

Bosch Dual Circuit Non-Pressurized Flow Centers WARNING: Improper installation, setup, modification, operation or maintenance of the heating system can cause personal injury and property damage. Follow each appliances' instructions precisely. For assistance

More information

PRO-Tect Pipe Freeze Protection Self-Regulating Heating Cable Install Manual (PT-Series)

PRO-Tect Pipe Freeze Protection Self-Regulating Heating Cable Install Manual (PT-Series) PRO-Tect Pipe Freeze Protection Self-Regulating Heating Cable Install Manual () Free Design Service 24/7 Installation Support (800) 875-5285 www.warmlyyours.com Assembly Tools Needed Utility knife Wire

More information

4 01 ta l o g u e 2 Ca P R i c e L I S T

4 01 ta l o g u e 2 Ca P R i c e L I S T Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm

More information

DS Series Solar System

DS Series Solar System DS Series Solar System Permit information Consol 30-58-1800 Collector Flat mount on Colorsteel Plumdeck roofing Valve vent, Open loop http:// www.consolsolar.co.nz 21 Page 1 of This system is an evacuated

More information

Linea - Line. raccordi a compressione compression fittings

Linea - Line. raccordi a compressione compression fittings 5300 Linea - Line raccordi a compressione compression fittings Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary

More information

Talbot Pushfit Service Fittings

Talbot Pushfit Service Fittings Talbot Pushfit Service Fittings Talbot Pushfit Talbot Pushfit fittings are quick and easy to use, with no nuts to loose or leave undone. Simply push the pipe into the fitting, The grip and seal on the

More information

A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.

A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. SECTION 221513 - COMPRESSED-AIR PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. 1.2

More information

CONTENTS. Procrimp Water and Gas Pipe and Fitting System 4. Procrimp Brass Fittings 5. Procrimp Brass Fittings Range 6

CONTENTS. Procrimp Water and Gas Pipe and Fitting System 4. Procrimp Brass Fittings 5. Procrimp Brass Fittings Range 6 2 CONTENTS Procrimp Water and Gas Pipe and Fitting System 4 Procrimp Brass Fittings 5 Procrimp Brass Fittings Range 6 Propex Water Pipe Specifications 8 Propex Gas Pipe Specifications 10 Propex Gas Sizing

More information

HITCH INSTALLATION INSTRUCTIONS TOW XC 40 VOLVO MODEL/ TRIM YEARS: 2 1/2 HOURS to Present PARTS & SUPPLIES: TOOLS REQUIRES: INSTALLATION TIME:

HITCH INSTALLATION INSTRUCTIONS TOW XC 40 VOLVO MODEL/ TRIM YEARS: 2 1/2 HOURS to Present PARTS & SUPPLIES: TOOLS REQUIRES: INSTALLATION TIME: HITCH INSTALLATION INSTRUCTIONS MAKE: VOLVO YEARS: 2018 to Present MODEL/ TRIM XC 40 PACKAGE: TOW INSTALLATION TIME: 2 1/2 HOURS WEIGHT CAPACITY TRAILER 3500 LBS. TONGUE 300 LBS. DO NOT EXCEED VEHICLE

More information

Manifold Isolation Valves

Manifold Isolation Valves 300 N. Opdyke Rd. Introduction The Stainless Manifolds are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options

More information

Rusty s Off Road Products.

Rusty s Off Road Products. Rusty s JK Wrangler 3.25 Bolt On Long Travel Kit Rusty s JK Wrangler 5.75 Bolt On Long Travel Kit RK 725LT JK RK 755LT JK INSTALLATION INSTRUCTIONS Last Revised: 4/9/2018 Rusty s Off Road Products Introduc

More information

THE RIGHT SOLUTION FOR EVERY APPLICATION

THE RIGHT SOLUTION FOR EVERY APPLICATION CATEGORY CABLES FOR AUTOMATION THE RIGHT SOLUTION FOR EVERY APPLICATION FLEXIBLE CONTROL CONTINUOUS FLEX SILICONE TORSION TRAY VFD DATA SERVO MOTOR EUROAN STYLE BUS/CAT HALOGENFREE REELING SCIAL CUSTOM

More information

1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service.

1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service. KENNEDY KENNEDY VALVE MODEL VALVE KS-RW 1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service. 2. The valves shall have a cast

More information

Snow Melt EN_US_2014_V2.indb 171 2/7/ :18:52 AM

Snow Melt EN_US_2014_V2.indb 171 2/7/ :18:52 AM 171 Viega snow melting systems are complete hydronic solutions for residential, commercial and industrial applications. All it takes is ViegaPEX Barrier tubing installed in a concrete slab and the proper

More information

Maintenance Manual. Automated Fuel Maintenance System FUEL TECHNOLOGIES INTERNATIONAL

Maintenance Manual. Automated Fuel Maintenance System FUEL TECHNOLOGIES INTERNATIONAL Maintenance Manual Automated Fuel Maintenance System FTI 10A & FTI 20A FUEL TECHNOLOGIES INTERNATIONAL Replacement Manuals Available on Website: www.fueltechnologiesinterna onal.com 03/01/2011 Rev D Fuel

More information

PRINETO Price List Prineto

PRINETO Price List Prineto PRINETO Price List Prineto Contents Pipes P. 4 Sleeves P. 16 Cuphin special fittings P. 17 Drinking water installation accessories P. 22 Heating installation accessories P. 51 Surface heating / cooling

More information

FCX TECHNICAL BOOKLET

FCX TECHNICAL BOOKLET FAN COIL FCX US FCX USPO This document is based on AERMEC s FCX US, USP, USPO Technical and Installa on Booklet but reflects only those sizes and configura ons currently offered by Phoenix Energy Supply.

More information

Self-operated Temperature Regulators Temperature Regulator Type 1u

Self-operated Temperature Regulators Temperature Regulator Type 1u Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points from 0 to 250 C G ½ to G or DN 5 to DN

More information

Fittings and Accessories. for Centralized Lubrication Systems and General Use

Fittings and Accessories. for Centralized Lubrication Systems and General Use and Accessories 1-0103-US 1 Fittings and Accessories 1-0103-US for Centralized Lubrication Systems and General Use Fittings and Accessories 1-0103-US 3 Contents Page Adaptors... 9, 10 Banjo fittings...

More information

High Voltage Copper, Smooth Aluminum Shield/Sheath

High Voltage Copper, Smooth Aluminum Shield/Sheath High Voltage Copper, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric

More information

Expansion Joint. Ball Joint Flexible Joint

Expansion Joint. Ball Joint Flexible Joint Ball Joint Flexible Joint 255 Selection Ball Joint Selection Flexible Joint Selection 0.98 1.0 2.0 274 274 276 276 275 275 EB-1J EB-2J ES-10 ES-11 EB-11 EB-12 Type Bellows Sleeve Max. Pressure (MPa) 10

More information

Copper & Copper Nickel. Pipes Fittings Flanges.

Copper & Copper Nickel. Pipes Fittings Flanges. Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS

More information

FRICTION TORQUE LIMITER (SAFETY COUPLINGS)

FRICTION TORQUE LIMITER (SAFETY COUPLINGS) FRICTION TORQUE LIMITER (SAFETY COUPLINGS) Up to 23.000 Nm of torque and 140 mm bore DF 7 01-2015 DF - fric on torque limiter: introduc on Simple and economic fric on torque limiter. Suitable for dusty

More information

Outdoor Bottle Fillers

Outdoor Bottle Fillers Outdoor Bottle Filler Pedestal Mounted Sensor/Pushbutton Activation M-OBF4 / M-OBFM4 TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER: 1.800.51.360 Technical Assistance Fax: 1.626.855.484 NOTES TO INSTALLER:

More information

Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve

Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used

More information

HDPE Pipe. Catalogue

HDPE Pipe. Catalogue HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range

More information

BRASS AND BRASS NICKEL PLATED (SANITARY) COMPRESSION FITTINGS

BRASS AND BRASS NICKEL PLATED (SANITARY) COMPRESSION FITTINGS BRASS AND BRASS NICKEL PLATED (SANITARY) COMPRESSION FITTINGS 20 YEAR WARRANTY TECHNICAL DOCUMENTATION UK 001 COMPRESSION FITTINGS BRASS AND BRASS NICKEL PLATED (SANITARY) COMPRESSION FITTINGS PRODUCT

More information

MrPEX 1 ½ " Brass Manifold Installation Guide

MrPEX 1 ½  Brass Manifold Installation Guide MrPEX 1 ½ " Brass Manifold Installation Guide Design MrPEX 1 ½" Brass Manifold is made from high quality alloy extruded and chrome plated after machining, and is offered in 2 through 12 loop configurations.

More information

4500 Linea / Line FIELDS OF APPLICATION SYSTEM

4500 Linea / Line FIELDS OF APPLICATION SYSTEM 4500 Linea - Line Raccordi a compressione con anello tagliato per tubo in polietilene ad alta e bassa densità. Compression fittings for low and high density polyethylene pipe with brass ring 4500 Linea

More information

M-8100EP. Installation Guide ENGINEERED PLASTIC MANIFOLD SERIES. Introduction. A. Assemble Manifold Components

M-8100EP. Installation Guide ENGINEERED PLASTIC MANIFOLD SERIES. Introduction. A. Assemble Manifold Components Introduction The Pro Manifolds with Integrated adaptor are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options

More information

Huntington Mechanical Labs, Inc.

Huntington Mechanical Labs, Inc. R Huntington Mechanical Labs, Inc. Huntington Mechanical Labs, Inc. 155 Nevada ity venue Grass Valley,. 95945 Toll Free: 800-227-8059 Local: 50-27-415 FX: 50-27-4165 Sales email: vacman@huntvac.com Website:

More information

Power Connection Kit installation instructions

Power Connection Kit installation instructions Operating instructions & Parts Manual ET00 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and

More information

New Product Price List LT-NP0417 Effective Date: April 3, 2017

New Product Price List LT-NP0417 Effective Date: April 3, 2017 New Product Price List LT-NP0417 Effective Date: April 3, 2017 Full Freight Allowed Order any quantity of our new valves or fittings on this sheet and receive FFA on the first order! Any Legend item may

More information

Chlorine Valves and Accessories

Chlorine Valves and Accessories Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR

More information

03/02/16 TECH DATA SHEET Pipe Nipples

03/02/16 TECH DATA SHEET Pipe Nipples 03/02/16 TECH DATA SHEET 20569 Pipe Nipples 2 Pipe Nipples 01 Company Profile Jinan Meide Casting Co. Ltd. was established in 1962. In the past decades, Jinan Meide has seized each opportunity to consolidate

More information

Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings

Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe

More information

Street Sleeper III Air Cleaner Kit for 99 Up Twin Cam 9605

Street Sleeper III Air Cleaner Kit for 99 Up Twin Cam 9605 Street Sleeper III Air Cleaner Kit for 99 Up Twin Cam 9605 THANK YOU FOR CHOOSING CRUSHER! PROTECT YOURSELF AND OTHERS FROM POTENTIAL INJURY AND PROPERTY DAMAGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS,

More information

IRECO FITTINGS IN BRASS SERIES - FOR PLASTIC PIPES FOR ISO PIPES FROM DIAMETER 20 TO 63

IRECO FITTINGS IN BRASS SERIES - FOR PLASTIC PIPES FOR ISO PIPES FROM DIAMETER 20 TO 63 11/17 0800 DESCRIPTION The IRECO 800 series compression fittings with EPDM elastomer ring washer have been conceived, designed and manufactured for plastic piping used for transporting fluids under pressure.

More information

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module: FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is

More information

TAYLOR STUDWELDING SYSTEMS LIMITED OPERATING GUIDE FOR TYPE DA8 A DRAWN ARC STUDWELDING PISTOLS V 1B 1

TAYLOR STUDWELDING SYSTEMS LIMITED OPERATING GUIDE FOR TYPE DA8 A DRAWN ARC STUDWELDING PISTOLS V 1B 1 TAYLOR STUDWELDING SYSTEMS LIMITED OPERATING GUIDE FOR TYPE DA8 A DRAWN ARC STUDWELDING PISTOLS V 1B 1 INDEX PAGE CONTENT 3 GENERAL INFORMATION 4 SAFETY 5 INTRODUCTION TO STUDWELDING 6 MODEL VARIANTS 7

More information

DISCONTINUED. Installation. Aerada 900 Series Futura Faucet. With Accu-Zone (AZ) Infrared Control

DISCONTINUED. Installation. Aerada 900 Series Futura Faucet. With Accu-Zone (AZ) Infrared Control Aerada 900 Series Futura Faucet With Accu-Zone (AZ) Infrared Control BRADLEY SC A S53-141 4" Centerset S53-148 4" Centerset, no Solenoid Valve S53-186 4" Centerset with 8" Trim Plate S53-285 Centershank

More information

Cable thermocouple Model TC40

Cable thermocouple Model TC40 Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 Applications For direct installation into the process Machine building Motors Bearings Pipelines and vessels Special

More information

Compression Fittings & Valves. Make the connection

Compression Fittings & Valves. Make the connection Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system

More information

LIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.

LIQUIDLINE PROGRAM. Connections for cooling water.  dezincification-resistant brass. Messing. aluminium. LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,

More information

CALPEX Low Temperature System

CALPEX Low Temperature System CALPEX Low Temperature System Flexibly towards a safe future Nou! Ø 125/182 Ø 160/250 Contents Utilise your advantages 3 System description 4 6 Pressure loss 7 Heating range 8 19 Dimension of pipe UNO/DUO

More information

MODEL Model 55. Model 135 CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION. Rev 3/17 PN

MODEL Model 55. Model 135 CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION. Rev 3/17 PN MODEL 55 135 Model 55 Rated for motors up to 55 horsepower and 250 lbs. Model 135 Rated for motors up to 135 horsepower and 350 lbs. CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION

More information

PRODUCT CATALOGUE DOUBLE PREINSULATED PIPES

PRODUCT CATALOGUE DOUBLE PREINSULATED PIPES PN-EN 15698-1 ITB Technical Approval AT-15-7772/2008+ Annex no.1 Validity term: September 30, 2013 Issued by the Building Research Institute in Warsaw Preinsulated Pipe System To Be Used In Buried Thermal

More information

M Installation Guide. PRECISION Manifold Series. Introduction. A. Assemble Manifold Components

M Installation Guide. PRECISION Manifold Series. Introduction. A. Assemble Manifold Components Page 1 Introduction The M-8200 Precision Manifolds are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options with

More information

11. Installation Instruction

11. Installation Instruction 11. Installation Instruction 11.1 Select The Best Location If an awning is built over the unit to prevent direct sunlight or rain, be careful that heat radiation from the condenser is not obstructed. There

More information

Coupling Company. Catalog Version El Camino Ave. Corona, CA Phone: (951) Fax: (951)

Coupling Company. Catalog Version El Camino Ave. Corona, CA Phone: (951) Fax: (951) Coupling Company Catalog 2014 Version 1.01 1001 El Camino Ave. Corona, CA 92879 Phone: (951) 372-2732 Fax: (951) 738-1183 www.anaco-husky.com I NO HUB Table of Contents No hub Couplings List Price 1 No

More information

Triumph Repair/Parts Manual

Triumph Repair/Parts Manual PERMAGREEN SUPREME INC. Triumph Repair/Parts Manual For Models B1B: (serial numbers 12657 and above) Avoid serious injury! Lack of training, human error, or carelessness may cause serious injury or death

More information

THE RIGHT SOLUTION FOR EVERY APPLICATION

THE RIGHT SOLUTION FOR EVERY APPLICATION SAB CABLES FOR AUTOMATION THE RIGHT SOLUTION FOR EVERY APPLICATION FLEXIBLE CONTROL CONTINUOUS FLEX SILICONE TORSION TRAY VFD DATA SERVO MOTOR EUROPEAN STYLE BUS/CAT HALOGENFREE REELING SPECIAL CUSTOM

More information

Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)

Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company

More information

Signal Head Crane Maintenance Plan and Instructions

Signal Head Crane Maintenance Plan and Instructions Signal Head Crane Maintenance Plan and Instructions Maintenance and Inspection Instructions for the Thomson Engineering Design Ltd Signal Head Crane Original Document in English Language Issue 2: January

More information

connection Simero Vitrified Pvt. Ltd.

connection Simero Vitrified Pvt. Ltd. CERAMICS LUXURY AT ITS EXCELLENCE Plant : Behind Indian Oil Petrol Pump, Morbi-Halvad Road, State Highway no. 22,Nichi-Mandal, Morbi - 363641 Gujarat - INDIA. Email: sales@simero.in Simero Vitrified Pvt.

More information

Composite Push-In Fittings BSP/Metric Series 7000

Composite Push-In Fittings BSP/Metric Series 7000 2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,

More information

Series 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint

Series 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint Series 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint Uses and applications Performance Saltwater and seawater lines Brackish water lines Fire protection

More information

Crastin PBT Thermoplastic polyester resins

Crastin PBT Thermoplastic polyester resins Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN

More information

40 geothermal ground loop manifolds

40 geothermal ground loop manifolds 40 geothermal ground loop manifolds GeoCal (key features listed left) This is the first thermoplastic, fully modular manifold system designed specifically for installations using ground source heat pumps.

More information

AG1-BC BUTTERFLY VALVE

AG1-BC BUTTERFLY VALVE AG1-BC BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 9.4 09/2016 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing

More information

SHARKBITE INSTALLATION GUIDE

SHARKBITE INSTALLATION GUIDE SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up

More information

Street Sleeper III Air Cleaner Kit for '08 UP Touring and Trike 9606

Street Sleeper III Air Cleaner Kit for '08 UP Touring and Trike 9606 Street Sleeper III Air Cleaner Kit for '08 UP Touring and Trike 9606 THANK YOU FOR CHOOSING CRUSHER! PROTECT YOURSELF AND OTHERS FROM POTENTIAL INJURY AND PROPERTY DAMAGE OR LOSS. PAY CLOSE ATTENTION TO

More information

For the plastics machinery industry Fixed bayonet thermocouple Model TC47-FB

For the plastics machinery industry Fixed bayonet thermocouple Model TC47-FB Electrical temperature measurement For the plastics machinery industry Fixed bayonet Model TC47-FB WIKA data sheet TE 67.24 Applications Plastics and rubber industry For direct installation into the process

More information

Flanged Bearings. Installation & Storage Manual. Nitrile Rubber Lined JOHNSON CUTLESS WATER LUBRICATED BEARING SYSTEMS

Flanged Bearings. Installation & Storage Manual. Nitrile Rubber Lined JOHNSON CUTLESS WATER LUBRICATED BEARING SYSTEMS JOHNSON CUTLESS WATER LUBRICATED BEARING SYSTEMS Flanged Bearings a Solid Naval Brass Shell a Nitrile Rubber Lined LLOYD S REGISTER TYPE APPROVED PRODUCT Installation & Storage Manual Duramax Marine is

More information

YieldSense CNH Installation Guide

YieldSense CNH Installation Guide YieldSense CNH Installation Guide 9/2013 1 955521 Precision Plan ng, LLC 23207 Townline Road Tremont, IL 61568 ph. (309) 925-5050 fax. (309) 925-5029 info@precisionplan ng.com 2020support@precisionplan

More information

SHREDDER ROBUST. Examples of materials and granulates

SHREDDER ROBUST. Examples of materials and granulates It crushes all! SHREDDER ROBUST The Robust universal shredder enables simple, economic and efficient crushing of a variety of wood, wood waste and scrap, pallets (including nails and pins), par cle boards,

More information

Model 2314 Series. Operating Instructions & Maintenance Manual. Clearing The Airway Is Our #1 Priority

Model 2314 Series. Operating Instructions & Maintenance Manual. Clearing The Airway Is Our #1 Priority Model 2314 Series Operating Instructions & Maintenance Manual, INC. 11064 Randall Street Sun Valley, CA 91352 USA www.sscor.com shop.sscor.com Email: marketing@sscor.com techsupport@sscor.com Tel 1+818-504-4054

More information

Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets.

Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets. Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets. Champion Fiberglass began production of epoxy fiberglass

More information

h Technical Product Data CC Pressure Pipe Systems

h Technical Product Data CC Pressure Pipe Systems h Technical Product Data CC Pressure Pipe Systems Amiblu Holding GmbH All rights reserved. Publication: 09/2018 This version replaces all previous versions. For all current data please visit our website

More information

The electric drive for active wheelchairs. APPROVED MEDICAL PRODUCT Energize your wheelchair.

The electric drive for active wheelchairs. APPROVED MEDICAL PRODUCT Energize your wheelchair. The electric drive for active wheelchairs APPROVED MEDICAL PRODUCT Energize your wheelchair. www.invacare.co.uk Pushing the boundaries. In today s world, one thing ma ers more than anything: Indpendence.

More information

High Voltage Aluminum, Smooth Aluminum Shield/Sheath

High Voltage Aluminum, Smooth Aluminum Shield/Sheath High Voltage Aluminum, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric

More information

Table of Contents 2.0 EIGERFLEX CPE. 2.0 Table of Contents

Table of Contents 2.0 EIGERFLEX CPE. 2.0 Table of Contents Table of Contents 2.0 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 DN 20 - DN 40 with frost protection strip, Ø carrier pipe 25-50

More information

LED Emergency Drivers

LED Emergency Drivers LED Emergency Drivers McWong Interna onal, Inc. 1921 Arena Blvd., Sacramento, CA 95834 Tel: 916-371-8080 Fax: 916-371-6666 Email: support@mcwonginc.com Web: www.mcwonginc.com Copyright 2015 McWong Interna

More information

2016 MASTER CATALOGUE

2016 MASTER CATALOGUE 2016 2016 MASTER CATALOGUE 2 www.vanguardsteelvancouver.com www.vanguardsteel.com TABLE OF CONTENTS Page Criteria 1 'Golden Pin' Anchor 2 'Golden Pin' Chain 3 'Golden Pin' Safety Anchor 4 Golden Pin Super

More information

PIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:...

PIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:... FW-FERNWÄRME-TECHNIK GmbH Grafftring 2-6 D-29227 Celle Tel.: + 49 5141 888 88-0 Fax: + 49 5141 888 88-22 E-Mail: info@fw-gmbh.de Internet: www.fw-gmbh.de PIPE LOG BOOK... Project:... Construction section:...

More information

Article on Sheath materials, Thermowells, Fittings, and Terminations

Article on Sheath materials, Thermowells, Fittings, and Terminations Article on Sheath materials, Thermowells, Fittings, and Terminations 1. INTRODUCTION Temperature sensor element for laboratory and industrial use should normally be protected by some form of sheath or

More information