Y-Pattern Valve for Proportional Control Type 2632
|
|
- Jocelin Frederica Terry
- 5 years ago
- Views:
Transcription
1 Stainless Steel, /"-" Advantages / Benefits Ultra compact design - Low weight Automatic self-adjustment of basic parameters Integrated PID controller User-friendly operation - LCD display - Keypad interface - Easy-to-understand menu-guided programming Code protection against unauthorized access Maintenance-free packing glands certified Design The Type 63 is a stainless steel control valve with an electropneumatically operated positioner. The Type 067 positioner consists of three main parts: the valve stem position pickup, the electropneumatic control system and the micro-processor electronics. The valve stem position pickup, a linear potentiometer connected to the valve stem, feeds back the actual stem position to the positioner electronics. The micro-processor electronics compares the actual stem position to the set point given by a standard signal (4-0mA, 0-0V, ). In the case of a position difference, the electropneumatic control system corrects the stem position until the set point is reached. The Type 067 positioner also features a built-in process controller for the control of flow, temperature, pressure, etc. - Programmable flow curves: linear equal percentage freely programmable - No air consumption at steadystate conditions - Excellent flow characteristic combined with high flow rates - Integrated PID-Controller - Captured exhaust air - Direct mounting, no tubing between positioner and valve - Flanged, NPT or Tri-Clamp connections Applications Textile dyeing and bleaching Food processing Chemical industry Water treatment General processing industry Burkert Contromatic USA 60 McGaw Avenue Irvine, CA 964 Tel Fax Burkert Contromatic Inc. 760 Pacific Road, Unit 3 Oakville, Ontario, Canada L6L 6M5 Tel Fax Fluid Control Systems
2 Technical Data Positioner Type 067 Electrical Data Voltage supply: Power consumption: Signal input for positioner: Binary input: Connection: Pneumatic Data Instrument air: Air performance Air inlet valve: C v =.035 Exhaust valve: C v =.04 Internal air consumption at steady-state condition: Connection: 4 V DC < 0 W Unit signal: 4 0 ma 0 0 ma 0 0 V Configurable as normally open or closed contact Terminal strip Cable gland x PG 9 Filtered compressed air, lubricated or nonlubricated Zero Female pipe thread, G /8' Positioner Data Overall dimensions: 5" x 3." x 3" Body material: Aluminum, laquered Fluid plate material: Aluminum, anodized Weight of positioner: Approx.. lbs Rating: NEMA 4 (IP 65) Operating temperature: 3 F to 40 F Technical Data Control Valve 63 Valve Size: /", ", ", -/4", -/", " Connection: 50# ANSI raised face flange, NPT, Tri-Clamp Control range: More than 50: Flow characteristic: Modified equal percentage Flow capacity: See table below Fluid temperature: +4 F to +356 F Max. Operating pressure: 30 PSI (at ambient temperature) Actuator Actuator piston dia.: See table page 4 or 6 Supply pressure: 65 PSI, min. 85 PSI, max. Function: Leakage class: Normally closed. Flowdirection under seat. According to ANSI B 6-04 Class IV (Stainless steel seat and stainless steel plug) Specifications - Flow Capacity Plug travel [%] -value /" 3 /4" " -/4" -/" " C v
3 Functional Diagram Material External position of reference value Reference value of process Shown without positioner Feedback/Position Transducer Desired-Position Process Control Actual- Position Positioner 5 6 Supply air Solenoid Valves Exhaust air 4 Control Valve 3 Sensor Valve body: 36 SS Plug and seat: 36 SS or 36 SS and PTFE 3 Pin: 36 SS 4 Valve bonnet: 36 SS 5 Actuator: Polyamide 6 Packing glands: PTFE Packing box: 36 SS Ordering Chart Item No. for Different Connections Orifice Size Actuator Piston dia. Max. Oper. Pressure [PSI] Seal Threaded Port [ NPT] Item No. Weight [lbs] Tube O.D. Tri-Clamp Item No. Weight [lbs] Pipe Size 50# ANSI Flange Item No. Weight [lbs] / 30 / V X 6.0 / 45 6Q Z W Y 6.4 3/ 4 USO 50 9 USO / R S E U J* 46 3 E* J T 4.3 -/4 30 -/ F Z.9 -/ K* 46 3 F*.9 -/ K U 9.6 -/ / Q 46 7 N 5.0 -/ H* G* 5.0 -/ L V R 46 7 P W* H* M E 8.9 *Metric 3
4 Dimensions NPT-port Flow direction Tri-Clamp Variable dimensions P (NPT Actuator Piston dia. C E øf øj K L M N / / /
5 50% More Economical Than Conventional Control Valves Pressure Control Flow Control Temperature Control to calibrate Automatic self-adjustment of basic parameters by finger tip control to operate User-friendly operation LCD and key pad interface Menu-guided programming Programmable characteristic curves to install Compact design Delivered pre-mounted, tested and ready to install Requires less space than conventional control valves Burkert Link to operate Burkert control valve with Burkert digital flow transmitter for proportional process control. 5
6 Dimensions Variable dimensions Size Actuator piston dia. A A D C P E F C I K L d / / / In case of special requirements please consult for advice. We reserve the right to make technical changes without notice. US_63_07/0
The manifolds can be powered through various fieldbus systems, multipole or common terminals.
Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level
More informationFluid Control System with Diaphragm Valve For Polluted, Dirty, Aggressive and Ultra-Pure Fluids
TOP Control System / ON/OFF and Proportional /-Way, / Advantages/Benefits Decentralized Intelligence for ON/OFF and Proportional control of processes Customized System Solutions for Easy LINK and Easy
More information2/2 way Globe Control Valve, threaded connection, 3/8" 3"
2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More information2/2 way Globe Control Valve, flange connection, 1/2" 4"
2/2 way Globe Control Valve, flange connection, 1/2" 4" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More information+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve
Angle-seat Valve System for continuous control Type 8802/2300 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert 8802 continuous control valve + = 2300 series
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationGlobe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system
Globe Valve System for continuous control Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8802/2301 + = Type 2301 Series Globe valve Type
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More information2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam
cryogenic extended stem 2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam Type 2000 can be combined with Spring return closed or open, double-acting, manual operation Materials:
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationSeries 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
More information700 Series Anti-corrosion Control Valves
7 Series Anticorrosion Control Valves Specification Data CH92 11/97 Split Body PTFE Lined Control Valves for Corrosive Applications Table of Contents Foreword.................................................................
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More informationActuated Valves PRICING
Electric & Pneumatic Actuated Valves Actuated Valves PRICING Page Suitable for Oil-Free air handling to 5 psi, not for distribution of compressed air or gas Spears Manufacturing Company Due to Material
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More information2/2-way Globe Control Valve, threaded port connection, DN 10-65
2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationSeries 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
More informationKOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
More information2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN
2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in
More informationBall Valves in cast 316 SS multi-port, bolted construction
65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options
More informationKOMBAT K1 Pneumatic Control Valve
Applications Bottle Washing Induction Furnaces Machinery Industrial Compressors Steam Tables Cold Storage Boxes Plating Tanks Cooling Ducts Heating Ducts Engine Jacket Cooling Fuel Oil Heaters Liquid Chillers
More informationTOP-QUALITY PNEUMATIC ACTUATOR
TOP-QUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuators are designed using Scotch-Yoke technology from PDS 50 to the largest of PDS 200. Scotch-Yoke technology is
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
More informationElectronic Globe Valve Guide Specifications
Electronic Globe Valve Guide Specifications Two and Three-Way Screwed Valves Valves 1/2" through 2" shall be bronze body, NPT screw type, and shall be rated for NSI Class 250 working pressure. The operating
More informationTopControl Continuous
860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat
More informationAngle-Seat Valve System for on/off control. Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system
Angle-Seat Valve System for on/off control Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8801/2100 + = Type 2100 angle-seat series
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More informationSS3 Linear / Rotary. Smart Valve Positioner. Smart performance with innovative and ever-strong coil drive even under harsh working environments
Smart Valve Positioner SS3 Linear / Rotary Smart performance with innovative and ever-strong coil drive even under harsh working environments Easy and quick auto-calibration Detecting RA (reverse acting)
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More informationElectropneumatic pressure regulator EPP4 Series
Electropneumatic pressure regulator EPP4 Series Connection G ¼ Catalogue 8683/UK The ECONOMIC solution which meets the market requirements Compact design and lightweight for ease of installation and low
More informationPositive displacement flowmeter for continuous flow measurement
8070 Positive displacement flowmeter for continuous flow measurement High accuracy Medium with high viscosity Mounting and dismounting of the electronics by a quarter-turn Connection to Bürkert devices
More informationMoniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners.
INSTALLATION & OPERATING INSTRUCTIONS SERIES 40 Positioners Form IO2-0406 Description of Device Moniteur's Series 40 pneumatic (3-15psi) and electropneumatic (4-20mA) positioners are advanced control devices
More informationFig Single-Acting Rotary Smart Positioner
Fig. 3303 Single-Acting Rotary Smart Positioner Order Information Model No. EC03303RSN52000S Econ series 3300 Smart Positioner for quarter turn actuators in single acting version. This positioner regulates
More informationMANUAL & AUTOMATED BALL VALVES
ESTABLISHED 1991 STEALTH VALVE & CONTROLS LTD. The Application Solution Company Exclusive Stocking Distributor for Valves, Actuators, Instruments and Specialty Products Serving: Industrial, Power, Food
More informationBaumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
More informationTECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY
Form TI47-POS A Watts Industries Co. TECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY 47-3000 FEATURES Compact design can be installed in any position Low maintenance epoxy coated aluminum manifold
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationCommon wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
More informationAngle Seated Valves. ecoflo-as. Angle Seated Valves
Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves
More informationGLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION
GLOBE 3 WAY CONTROL VALVE SERIES - 130 INTRODUCTION Pneucon' 3 way control valves are used to combine two flows or to divert one flow into two outlets. They are designed to replace and perform the functions
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationSeries 60. New Smart Positioner. Compact design Convenient & powerful function Enhanced reliability
Series 60 New Smart Positioner Compact design Convenient & powerful function Enhanced reliability J Flow Controls, LLC 14 De Camp Cincinnati, OH 45216 Phone: 513-731-2900 Fax 513-731-6939 www.jflowcontrols.com
More informationControl Valves Positioner
Control Valves Positioner HiFlo Valve Positioner Easy calibration Corrosion-resistant cover and base Withstands 150 psi at all parts Two -sided cam for easy field reversibility Optional / NPT for piped
More informationControl Valves Positioner
Control Valves Positioner HiFlo HiFlo Valve Positioner Corrosion-resistant cover and base Easy calibration Withstands 150 psi at all parts Two -sided cam for easy field reversibility Optional / NPT for
More information3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
More informationPython 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON
Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing
More informationPython Series Control Valves
Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases
More informationGLOBE 2 WAY CONTROL VALVE SERIES - 110
ACAD/PVCT/PVCT - 1 GLOBE WAY CONTROL VALVE SERIES - 1 INTRODUCTION This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More informationTOP-QUALITY PNEUMATIC ACTUATOR
TOPQUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuars are designed using ScotchYoke technology from PDS 50 the largest of PDS 200. ScotchYoke technology is well known
More informationSMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar B87
SMART VALVE POSITIONER to ma + HART Digital Communication B87 DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces
More informationPositioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application
Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories Selection and Application Associated s T 8355 EN ff. Edition January 2010 Information Sheet T 8350 EN Positioners,
More informationSwagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
More informationPG Series 180º Rotation Pneumatic Actuators
PDF Published April 18, 2016 PG Series 180º Rotation Pneumatic Actuators for Chemline 3-way ball valves up to 4 material: Epoxy and Rilsan coated aluminum SERIES: PGS Spring Return PGD Double Acting control
More informationBOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More informationCage Guided Globe Control Valves
Product 1: Pressure Balanced Cage type Control Valve Size: 1-1/2'', 2, 2-1/2'', 3'', 4'', 5'', 6'', and 8'' (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN100, JIS10K~JIS40K) OVERVIEW The model
More informationG2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
More informationKP-28 & KT-28 Two Way Control Valve
CRN-CANADA PASCO KP-28 & KT-28 Two Way Control Valve Fluid Control For Sustainable Future Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection.
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More informationPower Valves Italia operates in the petrochemical, paper, chemical, naval, food, air and water treatment sectors.
Thanks to its twenty years of experience in the field of industrial plant engineering, Power Valves Italia is able to offer a wide range of valves and accessories, through a customized and accurate design
More informationCLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
More informationAir Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationAngle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
More information3-way 1/2-2 Globe Valves
Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.
More informationPaddle-wheel flow controller with optical principle for On/Off control
Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor
More informationPositive displacement flowmeter
Positive displacement flowmeter Configurable outputs: one or two transistor output(s) and single or dual 4...20 ma current output(s) Removable backlit display of flow rate and/or 2 two totalized volumes
More informationPneumatic Actuator Accessories. Discrete, NEMA 4, Four-Way Air/Air Suffix A2 (For PAD3 & PKD2 actuators)
Air connections to actuator Discrete, NEMA 4, Four-Way Air/Air Suffix A2 (For PAD3 & PKD2 actuators) Integral, NEMA 4, Four-Way Air/Air Suffix A8 (For PKD3, PKD5, PKD7, & PKD9 actuators) Suffix A3 Air
More informationFluid Control System with Quarter-Turn Ball Valve for normal, aggressive and ultra-pure fluids. TOP Control System 265X
TOP Control System 65X /-Way; DN 0...80 mm; Plastic or Stainless Steel dvantages/benefits Decentralized ntelligence for ON/OFF control of processes Customized Fluid Control Systems for Easy LNK and Easy
More informationPP Series Pneumatic Actuators
PDF Published February 4, 07 PP Series Pneumatic Actuators for Chemline ball valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL PRESSURE: 40 to 0 psi OUTPUT TORQUES:
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationCONTROLS. Bray Pneumatic Actuators & Accessories. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.
CONTROLS A Division of BRAY INTERNATIONAL, Inc. Bray Pneumatic Actuators & Accessories Technical Manual TM-056 Pneumatic Actuator - 08//00 Bray Pneumatic Actuators & Accessories Technical Manual - Table
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
More informationModular pneumatic valve unit
Modular pneumatic valve unit Compact design Modular configuration High flexibility Type 8640 can be combined with Simple exchange of valves (with option P-shut-off - also possible during operation) Type
More informationQB4 PRESSURE CONTROL VALVE INSTALLATION & MAINTENANCE INSTRUCTIONS
QB4 PRESSURE CONTROL VALVE INSTALLATION & MAINTENANCE INSTRUCTIONS DESCRIPTION The QB4 is a closed loop electronic pressure regulator consisting of two solenoid valves, an internal pressure transducer,
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More informationISTEC MAGNETIC METERS
ISTEC MAGNETIC METERS MEASURE ANY CONDUCTIVE LIQUIDS OR SLURRIES (EVEN ABRASIVE OR CORROSIVE) WITH THE NEW MICROPROCESSOR-BASED MAGNETIC METER -- A QUALITY PRODUCT - SIMPLE - RELIABLE - AT AN AFFORDABLE
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More information3-port valves. pneumatically actuated
3-port valves pneumatically actuated Pneumatically actuated valves for quality and accuracy in fluid control The Spirax Sarco range of QL valves and pneumatic actuators are designed to give a comprehensive
More informationACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
More information4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES
SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro limit
More informationFunction Continuous control version: Type 8630 Position control or process control with an integrated PID controller
TopControl System 23/3 2/2-Way, DN 5...5 mm dvantages/benefits Decentralized Intelligence for On/Off and Continuous control of processes Customized System Solutions for Easy Link and Easy Networking together
More informationElectropneumatic pressure regulator EPP4 Series. Connection G ½. Catalogue 8684/UK G ½"
Electropneumatic pressure regulator EPP4 Series Connection G ½ Catalogue 8684/UK G ½" The ECONOMIC solution which meets the market requirements Compact design and lightweight for ease of installation and
More informationModular pneumatic valve island
Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with
More informationSeries 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
More informationA Type Double Acting Actuator Type: PA2911
Type: PA2911 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationTHE INSIDE STORY OF THE QPV OR MPV:
BRQPVMPV0305E THE INSIDE STORY OF THE QPV OR MPV: Access Hole Permits Field Adjustments Electronic Control Circuit Available in a Wide Range of Electrical Control Inputs and Analog Outputs Many Connector
More informationCompact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
More informationPneumatic Control Valve Type and Type Micro-flow Valve Type 3510
Pneumatic Control Valve Type 3510-1 and Type 3510-7 Micro-flow Valve Type 3510 ANSI version Application Control valve designed for controlling low flow rates in pilot plants and technical research facilities.
More informationBall Valves Pressures to 21,000 psi
Ball s s to 21,000 psi MAXIMATOR ball valves provide superior quality and performance with a variety of valve styles and process connections. All medium and high pressure connections are supplied with
More informationAirLINE and AirLINE Quick electrical/pneumatic Automation System
AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility
More information