Blade and Off Truck Kit HC Series Snowplows

Transcription

1 Fisher Engineering 50 Gordon Drive, Rockland, Maine , 7900 (CH), 7950, July 15, 018 Lit. No , Rev. 0 Blade and Off Truck Kit HC Series Snowplows Including Central Hydraulics Applications Parts List A DIVISION OF FISHER, LLC

2 Lit. No , Rev. 0 July 15, 018

3 HC SERIES BLADE COMPONENTS...4 Blade Components...4 HC SERIES OFF-TRUCK KITS...6 T Frame Components...6 Headgear Components...8 Hydraulic Unit Components Lift and Angle Ram Components... 1 Hoses and Fittings... 1 Electrical Components Vehicle-Side Harness Diagram 3 Port, Plug System Vehicle-Side Harness Diagram Central Hydraulics Headlamp Kit...16 Lit. No , Rev. 0 3 July 15, 018

4 Blade Components 10' Blade Shown 8 10* * * = Accessory Only 16 Lit. No , Rev. 0 4 July 15, 018

5 7950 / HC Blades 9' & 10' Item Part Qty Description Item Part Qty Description Removable Spring Assembly ns Label FISHER Splatter 8097 HC Curb Guard Cutting Edge Kit ns Label Identity, HC 10' Blade K Blade Guide Assembly ns HC Curb Guard Cutting Edge Kit Blade Guide Bracket Kit 9' Blade 10* SnoFoil Assembly 10' Blade Cutting Edge Kit 9' ns 5753* 1 SnoFoil Assembly 9' Blade x -3/4 Clevis Pin w/cotter 11* Shoe Kit Base Angle 10' Blade ns 7939* 1 High Wear Shoe Kit ns Base Angle 9' Blade ns 75794* 1 Blade Stop Kit Label Identity, STORM GUARD ns 5740* 1 10" Rubber Deflector Kit Label Warning/Caution, Snowplows ns 57411* 1 18" Rubber Deflector Kit Item Removable Spring Assembly 1 6 Removable Spring Bar /4 x 1-1/4 Pin** 13 6 Trip Spring Shoulder Bolt w/locknut 14 6 Removable Spring Disc Item 8097 HC Curb Guard Cutting Edge Kit 10' Blade Curb Guard, DS Bolt Bag, Curb Guard Cutting Edge ns Curb Guard, PS Item Cutting Edge Kit 9' Cutting Edge 9' Bolt Bag, Cutting Edge Bolt Bag, Curb Guard Cutting Edge 1 4 5/8-11 x -1/ Carriage Bolt G /8-11 Hex Locknut GB 4 5/8 Hardened Flat Washer Bolt Bag, Cutting Edge /8-11 x Carriage Bolt G /8-11 Hex Locknut GB * = Accessory Only ns = not shown ** = For 9' Blades: Qty 4; For 10' Blades: Qty 6 G = Grade Lit. No , Rev. 0 5 July 15, 018

6 T Frame Components Lit. No , Rev. 0 6 July 15, 018

7 T Frame Components Item Part Qty Description Item Part Qty Description T Frame Ram Pin Kit /4 x 16 3/4 Pivot Pin Elbow, 90 6 M JIC/1/4 M NPTF Retainer Plate Kit x 1-1/ Angle Ram Assembly Spring / U-Bolt / Link Kit ns Gland Nut Wrench Kit Pivot Beam Kit Item Retainer Plate Kit Retainer Plate 11 1/-13 Hex Locknut GB 10 1/-13 x Hex Cap Screw G5 Item Spring / U-Bolt / Link Kit Quick Link 15 3/8 16 Hex Nut G Spring /8 Grade 30 Proof Chain Bag 14 A6148K 3 U-Bolt Assembly Packet Item Pivot Beam Kit Leaf Spring Kit x 3-1/ Bolt w/jam Nut & Locknut Pivot Beam Item Ram Pin Kit Commercial Ram Pin /4 x 1 1/ Cotter Pin Item Leaf Spring Kit /8-16 x 1-1/4 Hex Cap Screw G5 3 3/8-16 Hex Locknut GB G = Grade M = Male ns = not shown Lit. No , Rev. 0 7 July 15, 018

8 Headgear Components Lit. No , Rev. 0 8 July 15, 018

9 Headgear Components Item Part Qty Description Item Part Qty Description Headgear Jack Lift Arm Kit Yellow K 1 Handle Kit Handle Link Arm Assembly Cover, Rear Jack Lock Cover, Front /4 x 3 1/ Compression Spring x 3 3/4 Clevis Pin /3 x 1 1/4 Cotter Pin /4 x 1 1/ Cotter Pin /8 16 x Hex Cap Screw G Connector 6 M JIC/ 6 M ORB /8 16 Hex Locknut GB Elbow 90 6 M JIC/ 6 M ORB Link Arm x 3 5/16 Clevis Pin HT K 1 Cable Boot Handle Cover Kit K Snap-In Bushing Kit ( bushings) Clamp Loop Kit K 1 Wire Cam Kit PS 7 716K-1 1 Stop Clip Kit K 1 Wire Cam Kit DS Label Minute Mount, Nameplate K Connecting Pin Kit Label Attach/Detach MM /4 x 3 1/16 Pin ns Label SECURITY GUARD /4 x Cotter Pin Item Lift Arm Kit Yellow Label Minute Mount, Nameplate K 1 3/4 x Machine Pin Packet Stop Link Kit Item K Wire Cam Kit PS Wire Cam PS /8 x 1 Cotter Pin /8 Flat Washer Type A Wide Item K Wire Cam Kit DS Wire Cam DS /8 x 1 Cotter Pin /8 Flat Washer Type A Wide Item K Connecting Pin Kit Clevis Pin Kit x 3 1/ Compression Spring x 6 15/16 Clevis Pin Item Stop Link Kit /8 x 5/8 Clevis Pin w/cotter 40 1 Stop Link Item K 3/4 x Machine Pin Packet /3 x 1 1/4 Cotter Pin /4 x Pin Item Clevis Pin Kit /3 x 1 1/4 Cotter Pin /8 x 3-1/4 Clevis Pin /8 Flat Washer Type A, Wide G = Grade HT = Heat Treated M = Male ns = not shown = Not used for Central Hydraulics. = Central Hydraulics only. Lit. No , Rev. 0 9 July 15, 018

10 Hydraulic Unit Components Lit. No , Rev July 15, 018

11 735 Hydraulic Unit 7353 Hydraulic Unit Service Kit** (Not Used for Central Hydraulics) Item Part Qty Description Item Part Qty Description K 1 1 Motor, 4 1/" K- 3 Coil w/spades 344K 1 Elbow, Street 90 w/breather Pump Shaft Seal Breather Pressure Control Elbow, 90 6 M JIC/ 6 M ORB Elbow, Street 90 3/8 M NPTF/ K 1 1 Hydraulic Pump Kit 3/8 F NPTF O-Ring Valve Manifold Assembly O-Ring Manifold Assembly Suction Filter Quill Assembly O-Ring Back-Up O-Ring Reservoir Kit O-Ring #10 4 x 5/16 Slotted Hex K 1 Poppet Check Valve Kit Washer-Head Machine Screw Plug, Hex Socket 3 M ORB Plug, Square 3/8 NPTF Bypass Check Valve Kit Plug, Hex Socket 1/4 NPTF w/ K-4 Relief Valve Kit (set of ) Thread Sealant SAE N/P Sleeve Bearing and Shaft Seal Kit /16 18 x 1/4 Hex Cap Screw K-1 1 Cartridge Valve, 4-Way w/nut Return Screen Assembly K 1 1 Cartridge Valve, 3-Way w/nut Magnet K- 1 Valve, -Way w/nut Inlet Fitting/Filter Kit O-Ring Service Kits 763K 5 O-Ring & Back-Up Ring Kit 4959 Seal Kit, 3-Way & 4-Way Valve 4958 Seal Kit, -Way Valve F = Female M = Male ** = Includes 735 Hydraulic Unit and Plow-Side Electrical Components (p. 13). = Use tool for bearing sleeve replacement (includes 1 bearing). = Use 8856 tool for pump shaft seal replacement (includes 1 seal). Lit. No , Rev July 15, 018

12 Lift and Angle Ram Components Lift Ram Assembly 1 3/4 x 10 Item Part Qty Description Split Bearing 1-1/" Gland Nut Assembly Angle Ram Assembly x 1-1/ Item Part Qty Description Wear Rings Gland Nut Assembly Hoses and Fittings Hoses and Fittings Item Part Qty Description Item Part Qty Description Hose, 1/4 x 8 w/f JIC Ends Elbow, 90 6 M JIC/ 6 M ORB Hose, 3/8 x 36 w/f JIC Ends ns Connector, Short 6 M JIC/ Hose, 3/8 x 57 w/f JIC Ends 6 M ORB F = Female M = Male ns = not shown = Not used for Central Hydraulics. = Central Hydraulics only, qty. 1. Lit. No , Rev. 0 1 July 15, 018

13 Electrical Components D 3 5 Plow-Side Electrical Components Item Part Qty Description Item Part Qty Description Plow Module, Port /4 0 x 1/4 Hex Washer-Head /4 0 x 5/8 Hex Washer-Head Thread-Rolling Screw Thread-Rolling Screw /8 16 x 1 Button Cap Screw Cable Assembly 8" Bracket Plow Module Motor Relay Kit FLEET FLEX System Clamp Loop Kit Snowplow Battery Cable ns Dielectric Grease Harness Plow Control, 3-Solenoid ns = not shown Vehicle-Side Electrical Components (Diagrams on following pages) A Vehicle Control Harness D 891K 1 Plug Cover (shown with B Vehicle Battery Cable plow-side electrical components) C Vehicle Control Harness Central Hydraulics = Not used for Central Hydraulics. = For diagram, see Vehicle-Side Harness Diagram 3-Port, -Plug System. = For diagram, see Vehicle-Side Harness Diagram Central Hydraulics. Lit. No , Rev July 15, 018

14 Vehicle-Side Harness Diagram 3 Port, Plug System B A Lit. No , Rev July 15, 018

15 Vehicle-Side Harness Diagram Central Hydraulics AB AB Snowplow Headlamps Snowplow Headlamps Park/Turn Lamps Vehicle Headlamps Vehicle Headlamps DRL Tap Park/Turn Lamps Factory Vehicle Harness ORN 14 AWG 16 AWG (not used) C Vehicle Control Harness RED BLK/ORN RED 15A Fuse (Park/Turn) 7.5A Fuse (Straight Blade Control) Battery To Switched Accessory (may need to be lengthened) ED CBA Vehicle Lighting Harness (11-Pin) Adapter B A Turn Signal Config. Plug Typical Plug-In Harness Factory Vehicle Harness 10A Fuses (Snowplow Park/Turn & Snowplow Control) 3-Port Module (Non-DRL or DRL) Lit. No , Rev July 15, 018

16 Headlamp Kit Headlamp Kit H9/H11 (Pair) Item Part Qty Description Item Part Qty Description Headlamp Service Kit H9/H11 PS Harness Service Kit H9/H11 ns Headlamp Service Kit H9/H11 DS Item /3880 Headlamp Service Kit H9/H11 PS/DS Rear Cover Kit H9/H11 PS Headlamp Bulb Service Kit H11 ns Rear Cover Kit H9/H11 DS Headlamp Bulb Service Kit H Mounting Hardware Kit H9/H Cover Screws Service Kit H9/H Park/Turn Bulb (trade no. 4157NAK) (pkg of 4) ns = not shown Lit. No , Rev July 15, 018

17 Lit. No , Rev July 15, 018

18 Fisher Engineering 50 Gordon Drive Rockland, ME A DIVISION OF FISHER, LLC Copyright 018 Douglas Dynamics, LLC. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of Fisher Engineering. Authorization to photocopy items for internal or personal use by Fisher Engineering outlets or snowplow owner is granted. Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifications used. Fisher Engineering or the vehicle manufacturer may require or recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Fisher Engineering offers a limited warranty for all snowplows and accessories. See separately printed page for this important information. The following are registered ( ) or unregistered ( ) trademarks of Douglas Dynamics, LLC: FISHER, Minute Mount, SECURITY GUARD, SnoFoil, STORM GUARD. Printed in U.S.A. Lit. No , Rev July 15, 018