PARTS BOOK ROTARY HEADS 50 CUT, INDIRECT DRIVE BOOM MOUNT

Transcription

1 PARTS BOOK ROTARY HEADS 50 CUT, INDIRECT DRIVE BOOM MOUNT DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD FOR WARRANTY CALL DIAMOND MOWERS DIRECT: OUR TECHNICIANS WILL DIAGNOSE YOUR SITUATION OVER THE PHONE TO GET YOU UP AND RUNNING QUICKLY. Phone: Fax: DIAMOND MOWERS, LLC

2 Page 2 Foreword This manual contains the parts breakdown and identification of the various components and structures that make up your mower implement. The illustrations, drawings, and diagrams in this manual are based on the latest information available at the time of publication. Your machine may have product improvements and features not yet contained in this parts manual. Diamond Mowers, LLC reserves the right to make changes at any time without notice or obligation. Diamond Mowers, LLC and Wetblade are trademarks of Diamond Mowers, LLC. This manual should be consulted prior and while assembling the unit, and anytime parts or assembly clarification is needed. Copyright 2016 Diamond Mowers, LLC All rights reserved. While every precaution has been taken in the preparation of this manual, the publisher assumes no responsibility for errors or omissions. No part of this book covered by the copyrights heron may be reproduced or copied in any form or by any means graphic, electronic, or mechanical, including photocopying, taping, or information storage and retrieval systems without written permission of the publisher.

3 Page 3 Table of Contents ROTARY HEADS 4 BOOM ROTARY HEAD - 50 INDIRECT DRIVE 5 BOOM ROTARY HEAD - 50 BLADE CONFIGURATIONS 7 SAW BLADE ATTACHMENT (OPTIONAL) - BOOM ROTARY HEADS 50 9 HYDRAULIC TRAPDOOR (OPTIONAL) - BOOM ROTARY HEADS DECK ASSEMBLIES MOTOR ASSEMBLY INDIRECT DRIVE SPINDLE 13 LIFT ASSEMBLIES X8 TIE-ROD CYLINDER 15

4 ROTARY HEADS

5 ROTARY HEADS Page 5 BOOM ROTARY HEAD - 50 INDIRECT DRIVE

6 ROTARY HEADS Page 6 BOOM ROTARY HEAD - 50 INDIRECT DRIVE 1 5/8 LOCK WASHER /8 LOCK WASHER /2 LOCK WASHER /16 FLAT WASHER /8 FLAT WASHER /4 H.S. LOCK WASHER /2 H.S. FLAT WASHER /8 H.S. LOCK WASHER /8 SAE H.S. FLAT WASHER /8 X 2 H.S. NF HEX CAPSCREW PLOW BOLT /8 X 1-3/4 NC HEX CAPSCREW /8 X 2-1/4 H.S. NF HEX CAPSCREW /2 X 2-1/4 NC HEX CAPSCREW /4 X 4 NC HEX CAPSCREW /2 X 4-1/2 NC HEX CAPSCREW /8 X 2-1/4 NC HEX CAPSCREW /4 X 2-1/4 NF H.S HEX CAPSREW BLADE BOLT - HEX BASE /8 NC HEX NUT /2 NC NYLOCK NUT /8 NC NYLOCK NUT /4 NF H.S. STOVER NUT /4 NC HEX NUT /8 H.S. NF SLOTTED HEX NUT /8 H.S. NF STOVER NUT /4 X 2 ROLLPIN FLAP #20 FLANGE KIT HOSE 1 X 65 (1FJIC X #20FLG-90DEG) HOSE 1 X 57 (1FJIC X #20FLG-90DEG) /8" BRUSH BLADE BOLT PROTECTOR SEAL PROTECTOR " TRI-HEX DISH " DECK SHELL MOTOR 365" 1-1/2" GEARS, KEYED SHAFT SPINDLE ASSEMBLY TORSION SPRING SPROCKET, MOTOR SPROCKET, SPINDLE COUPLING COVER W/ SEAL KIT CHAIN COUPLING SPINDLE KEY MOTOR KEY FRONT SHIELD REAR SHIELD TRAP DOOR ROD, REAR TRAP DOOR ROD, FRONT MOTOR BRACKET FLAP RETAINING BAR MAST RIGHT SKID SHOE LEFT SKID SHOE /32 X 1 ROLL PIN HOSE 1/4 X 62 (14/MORB-90DEG X 5/16MJIC) BLADE KIT (Includes 9, 19, 25, 27, & 32)

7 ROTARY HEADS Page 7 BOOM ROTARY HEAD - 50 BLADE CONFIGURATIONS 1 1-1/8 H.S. FLAT WASHER " NORDLOCK WASHER BLADE MOUNTING BOLT X 1-1/2 NF H.S. HEX CAP BLADE MOUNTING NUT /4 X 2 ROLLPIN KNIFE * 50" BRUSH BLADE - 5/8" ** 50" BRUSH KNIFE - 1/2" *** 50" GRASS KNIFE, HIGH SUCTION - 1/2" **** 50" BI-DIRECTIONAL BLADE - 1/2" ***** 50" BRUSH KNIFE - REVERSE ROTATION - 5/8" BLADE BAR, BOTTOM BLADE BAR, TOP REPLACEABLE HEX INSERT Avail BLADE BOLT - 1-1/8 KEYED /8 NF NYLOCK NUT KNIFE * 50" BRUSH BLADE - 5/8" ** 50" BRUSH KNIFE - 1/2" *** 50" GRASS KNIFE, HIGH SUCTION - 1/2" **** 50" BI-DIRECTIONAL BLADE - 1/2" ***** 50" BRUSH KNIFE - REVERSE ROTATION - 5/8" BLADE DISH

8 ROTARY HEADS Page 8 BOOM ROTARY HEAD - 50 BLADE CONFIGURATIONS 1 1-1/8 H.S FLAT WASHER BLADE MOUNTING BOLT BLADE MOUNTING NUT ROLLPIN KNIFE * 50" BRUSH BLADE - 5/8" ** 50" BRUSH KNIFE - 1/2" *** 50" GRASS KNIFE, HIGH SUCTION - 1/2" **** 50" BI-DIRECTIONAL BLADE - 1/2" ***** 50" BRUSH KNIFE - REVERSE ROTATION - 5/8" D3 50'' TRI-HEX DISH REPLACEABLE HEX INSERT Avail /8 H.S FLAT WASHER BLADE MOUNTING BOLT BLADE MOUNTING NUT ROLLPIN KNIFE * 50" BRUSH BLADE - 5/8" ** 50" BRUSH KNIFE - 1/2" *** 50" GRASS KNIFE, HIGH SUCTION - 1/2" **** 50" BI-DIRECTIONAL BLADE - 1/2" ***** 50" BRUSH KNIFE - REVERSE ROTATION - 5/8" D3 50'' ROUND DISH REPLACEABLE HEX INSERT Avail

9 ROTARY HEADS Page 9 SAW BLADE ATTACHMENT (OPTIONAL) - BOOM ROTARY HEADS /8 H.S. LOCK WASHER /8 X 2 NF H.S. CAPSCREW " SAW BLADE CARBIDE TIP HOLDER CARBIDE REPLACEMENT TIP RIVET RIVET REMOVAL TOOL Avail SHARPENING TOOL (NOT SHOWN) Avail BOLT PROTECTOR BOLT PROTECTOR SPACER

10 ROTARY HEADS Page 10 HYDRAULIC TRAPDOOR (OPTIONAL) - BOOM ROTARY HEADS /4 X 2 ROLL PIN /32 X 1 ROLL PIN X 8 CYLINDER /2ADJ-OR X 1/2FPX-90DEG, FITTING HOSE 1/4 X 77 (1/2MP X 5/16MJIC) HOSE 1/4 X 66 (1/2MP X 5/16MJIC) CLEVIS PIN, 1 X 3-1/ TRAP DOOR ROD, REAR HYDRAULIC SHIELD

11 DECK ASSEMBLIES

12 MOTOR ASSEMBLY DECK ASSEMBLIES Page 12 1 SNAP RING OUTBOARD BEARING BUSHING THRUST PLATE SEAL RETAINER M365 SEAL KIT Avail GEAR HOUSING SHAFT SEAL 150 PSI (included in M365 seal kit) PSI SHAFT END COVER CHECK ASSEMBLY ALIGNMENT BUSHING PORT END COVER STUD WASHER GEAR SET OPTION A: /2" GEAR SET GEAR S ET OPTION B: 16 RETAINING RING WASHER /2" GEAR SET CONTINENTAL SHAFT, KEYED PLUG * SEAL APPLICATOR TOOL (not shown) Avail

13 DECK ASSEMBLIES Page INDIRECT DRIVE SPINDLE 1 BEARING CONE BEARING CONE BEARING CUP BEARING CUP BEARING ADJUSTMENT SLEEVE JAM WASHER ADJUSTMENT BEARING NUT ADJUSTMENT BEARING NUT /8 X 90DEG ELBOW /8" X 45 GREASE ZERK UPPER SEAL SET LOWER SEAL SPINDLE SPINDLE HOUSING SPROCKET SPINDLE KEY * SPINDLE ASSY COMPLETE Avail ** DIAMOND SPINDLE GREASE Avail *** SPINDLE REPAIR KIT Avail

14 LIFT ASSEMBLIES

15 X8 TIE-ROD CYLINDER LIFT ASSEMBLIES Page 15 1 PISTON ROD CLEVIS ASSEMBLY BUTT GLAND PISTON LOCKNUT TUBE TIE-ROD ASSEMBLY SEAL KIT

16 100% SATISFACTION GUARANTEE GET IT, LOVE IT, or LEAVE IT! 72-HOUR PARTS SHIPPING GUARANTEE