0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors
|
|
- Prosper O’Neal’
- 5 years ago
- Views:
Transcription
1 0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors FH19C Series/FH19SC Series FH19C FPC/FFC thickness: 0.2±0.0mm Actuator color: Brown Features 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization of portable equipment and personal mobile devices has created increased demand for a low profile, high density, and high reliability connectors. *The design of this connector has been made thinner and smaller, with a height of 0.9mm and width of mm. *PCB footprint: Reduced approximately 48% (as compared with Hirose Electric's 0.5mm pitch FH Series connectors) *Connector weight: Reduced approximately 8% (as compared with Hirose Electric's 0.5mm pitch FH Series connectors) 2. Conductive traces on the PCB can run under the connector All bottom surface of the connector is solid, without any exposure of the contact.. Proven Flip-Lock Actuator System assures easy and reliable operation Rotating actuator permits easy insertion and reliable connection with the FPC & FFC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. 4. Accepts 0.2mm & 0.mm thick FPC/FFC No exposed contacts on the bottom of the connector. The connector will also terminate with 0.2mm thick Flat Flexible Cable (FFC). 5. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors. 6. Wide range of contact counts The contact positions available range from 4 to 50.. Satisfies Halogen-free requirements All materials and substances used in this product comply with the Halogen-free standards. * Defined according to IEC Br: 900ppm max, Cl: 900ppm max, Br+Cl: 1,500ppm max FH19SC FPC/FFC thickness: 0.±0.0mm Actuator color: Black 0.9mm high ( pos. shown) 0.9mm 1mm Can be mounted over conductive traces Enclosed construction (No exposed contacts) Metal fittings (Leadless) Metal Fittings (Leadless Type) No protrusions on the sides allows close side-by-side board placement. Actuator Temporary Hold Mechanism Actuator stays open during insertion of the FPC/FFC. mm w 1
2 Product Specifications Current rating 0.5 A (Note1) Rating Voltage rating 50 V AC Operating temperature range -55ç to +85ç (Note 2) Operating humidity range Relative humidity 90% max. (No condensation) Storage temperature range -10ç to +50ç (Note ) Storage humidity range Relative humidity 90% max. (No condensation) Recommended FPC, FFC FH19C Series FH19SC Series Thickness: = 0.2 ± 0.0mm Gold plated Thickness: = 0. ± 0.0mm Gold plated Item Specification Conditions 1. Insulation resistance 500 M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown 0 V AC/1 minute. Contact resistance 100 m ohms max. *Including FPC/FFC conductor resistance 1 ma 4. Durability Contact resistance: 100 m ohms max. (insertion/ withdrawal) No damage, cracks, or parts dislocation. No electrical discontinuity of 1 μs or more. 5. Vibration Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. No electrical discontinuity of 1 μs. min. 6. Shock Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation.. Humidity (Steady state) Note 1: When passing the current through all of the contacts, use 0% of the current rating. Note 2: Includes temperature rise caused by current flow. Note : The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.information Materials Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. 8. Temperature cycle Insulation resistance: 100 M ohms min. No damage, cracks, or parts dislocation. 9. Resistance to soldering heat No deformation of components affecting performance. 20 cycles Ordering information FH 19 C - S SH (05) Frequency: 10 to 55 Hz, single amplitude of 0.5mm, 10 cycles in each of the directions Acceleration of 981 m/s 2, 6 ms duration, sine halfwave waveform, cycles in each of the axis. 96 hours at temperature of 40ç and humidity of 90 to 95% Temperature: -55ç / +ç to +5ç / +85ç / +ç to +5ç Time : - / 2 to / + / 2 to (Minutes) 5 cycles Reflow: At the recommended temperature profile Manual soldering: 50ç±5ç for 5 seconds Part Material Finish Remarks Color: Beige Insulator LCP Color: Brown (FH19C Series) UL94V-0 Color: Black (FH19SC Series) Contacts Phosphor bronze Gold plated Metal fittings Phosphor bronze Pure tin reflow plated Series name : FH Series No. : 19 C : FPC thickness : 0.2mm SC : FPC/FFC thickness : 0.mm No. of contacts : 4 to 50 5 Contact pitch : 0.5mm 6 Terminal type SH: SMT horizontal mounting type Material and plating specifications : FH19C : (10)...Gold plating with nickel barrier 5,000pieces/reel (99)...Gold plating with nickel barrier 500pieces/reel FH19SC : (09)...Gold plating with nickel barrier 5,000pieces/reel (99)...Gold plating with nickel barrier 500pieces/reel 2
3 Connector Dimension [FH19C Series] A± Polarizing mark indicator B G Number of contacts (0.) 0. G A Number of contacts indicator (1) (0.5) 2.5±0. (1.6) (0.) (C: FPC insertion slot dimension) MAX 0.MAX 1 2 D±0.1 (1.) S 2.±0.2 Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1mm. 2 The contact terminal lead position indicates the dimension from the bottom surface of the insulator body. Difference between terminal contact to be max. 0.1mm. 4 Packaged on tape and reel only. Check packaging specification. 5 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. 6 After reflow, the terminal plating may change color, however this does not represent a quality issue. Unit: mm Part Number CL No. Number of Contacts A B C D FH19C-04S-0.5SH(**) ** FH19C-05S-0.5SH(**) ** FH19C-06S-0.5SH(**) ** FH19C-0S-0.5SH(**) ** FH19C-08S-0.5SH(**) ** FH19C-09S-0.5SH(**) ** FH19C-10S-0.5SH(**) ** FH19C-S-0.5SH(**) ** FH19C-1S-0.5SH(**) ** FH19C-S-0.5SH(**) ** FH19C-1S-0.5SH(**) ** FH19C-20S-0.5SH(**) ** FH19C-21S-0.5SH(**) ** FH19C-S-0.5SH(**) ** FH19C-2S-0.5SH(**) ** FH19C-S-0.5SH(**) ** FH19C-4S-0.5SH(**) ** FH19C-40S-0.5SH(**) ** FH19C-50S-0.5SH(**) ** (1 ) 0.9±0.1(Including contact terminal leads) Note1: Embossed tape reel packaging (5,000 pieces/reel, 500 pieces/reel). Order by number of reels.
4 [FH19SC Series] A± B Polarizing mark indicator Number of contacts indicator (1 ) D±0.1 Number of contacts (0.) 0. G (C: FPC insertion slot dimension) A (0.) G (1) ±0. (0.5) (1.6) 5 2.±0.2 (1.) 0.9±0.1(Including contact terminal leads) 1 0.MAX 0.MAX 1 2 Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1mm The contact terminal lead position indicates the dimension from the bottom surface of the insulator body. Difference between terminal contact to be max. 0.1mm. Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. The contacts are protruding. 0.0mm max. from the housing top surface. Packaged on tape and reel only. Check packaging specification. After reflow, the terminal plating may change color, however this does not represent a quality issue. Unit: mm Part Number FH19SC-S-0.5SH(**) FH19SC-1S-0.5SH(**) FH19SC-14S-0.5SH(**) FH19SC-S-0.5SH(**) FH19SC-S-0.5SH(**) FH19SC-1S-0.5SH(**) FH19SC-S-0.5SH(**) FH19SC-20S-0.5SH(**) FH19SC-21S-0.5SH(**) FH19SC-22S-0.5SH(**) FH19SC-S-0.5SH(**) FH19SC-26S-0.5SH(**) FH19SC-2S-0.5SH(**) FH19SC-28S-0.5SH(**) FH19SC-S-0.5SH(**) FH19SC-2S-0.5SH(**) CL No ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** Number of Contacts A B C D S Note1: Embossed tape reel packaging (5,000 pieces/reel, 500pieces/reel). Order by number of reels. 4
5 Recommended PCB Land and Metal Mask Dimensions [Common to FH19C & FH19SC Series] Recommended metal mask thickness: 0.10 mm. 0.8± B Number of contacts 0.±0.05 (Land) 0.1 H 0.25±0.05 (Metal mask) H (0.).± ±0.05 J±0.1 K±0.1 Recommended FPC, FFC Dimensions [Common to FH19C & FH19SC Series] 2.5±0. (Exposed traces) 0.5±0.0 B± ±0.0 L±0.05 (A) 0.5±0.0(FPC) 0.±0.0(FFC) 2-R0.2 (X) (0.05) (0.) (0.) (0.2) 0.2±0.0.5 min. (Stiffener) (2.5) (0.) () FH19C Series FH19SC Series Note 1: Stiffener dimension should be.5mm min., and X dimension should be 0.5mm for improved flexibility of FPC. 0.±0.0.5 min. (Stiffener) Unit: mm Number of Contacts A B J K L Unit: mm Number of Contacts A B J K L
6 FH19C & FH19SC Series FPC/FFC Construction (Recommended Specifications) 1. Using Single-sided FPC 2. Using Double-sided FPC. Using FFC (Flexible Flat Cable) 4. Precautions FPC : Flexible Printed Circuit Material Name Covering layer film Cover adhesive Surface treatment Copper foil Base adhesive Base film Reinforcement material adhesive Stiffener Polyimide Material 1 mil thick Cu 1oz Thermosetting adhesive Polyimide 1 mil thick Thermosetting adhesive FPC : Flexible Printed Circuit Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Reinforcement material adhesive Stiffener Material Name Covering layer film Cover adhesive Surface treatment Polyimide Material 1 mil thick Nickel under plated 1 to 5μm / Gold plated 0.2μm Cu Cu 1/2oz Thermosetting adhesive Polyimide 1 mil thick FFC : Flexible Flat Cable Polyester film Adhesive (Nickel under plated / Gold plated), soft copper film Adhesive Polyester Adhesive Stiffener Material Name Nickel under plated 1 to 5μm / Gold plated 0.2μm Thickness (μm) FH19C FH19SC (25) (25) (25) (25) Polyimide FH19C : mil FH19SC: mil 5 Total Thickness (μm) FH19C FH19SC (25) (25) (25) (25) 25 Cu 1/2oz Thermosetting adhesive Polyimide 1 mil thick Thermosetting adhesive Polyimide FH19C : 1mil FH19SC: 4mil Total Material Polyester thermoplastic type Polyester Polyester Polyester Total * Practical tolerance of thickness dimension is ±20μm (i.e., to 22μm). 1. This specification is a recommendation for the construction of the FH19C/FH19SC Series FPC and FFC (t=0.2/0.±0.0). 2. For details about the construction, please contact the FPC/FFC manufacturers. Thickness (μm) FH19C () () FH19SC () () 5 8 6
7 Packaging Specifications [Common to FH19C & FH19SC Series] Embossed Carrier Tape Dimensions (1.) 4±0.1 2±0. 8±0.1 (0.) 0 Ø ±0.1 (Q) M±0. N±0.1 Reel Dimensions Unreeling direction (Ø1) (.) (4.) End cection Mounting cection Lead cection (400 mm min.) (1) Flat surface for placement with automatic equipment Blank cection Embossed carrier tape Blank cection Top cover tape (10 pockets min.) (10 pockets min.) (Ø80) (Ø80) (R:INSIDE) (T:OUTSIDE) Unit: mm Number of Contacts M N Q R T Note: Embossed tape 2 mm or wider will have perforated feed holes on two sides. Unit: mm Number of Contacts M N Q R T
8 Recommended Temperature Profile [For FH19C & FH19SC Series] Temperature(ç) Start 25ç (60 sec.) MAX 250ç 2ç 200ç 0ç 90 sec. to 0 sec. (60 sec.) Preheating Soldering Time (Seconds) HRS test condition Solder method :Reflow, IR/hot air Solder composition :Paste, 96.5%Sn/.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd. s Part Number:M05-221CM ) Test board :Glass epoxy 45mm 100mm 1.6mm thick Land dimensions :0.mm 0.8mm Metal mask :0.25mm 0.8mm 0.1mm This temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult tour solder paste and equipment manufacturer for specific recommendations. 8
9 Connector Operation and Precautions Operation 1. FPC/FFC Termination procedure. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. Precautions 1) Do not apply excessive force or use any type of tool to operate the actuator. 2) Assure that the FPC/FFC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. FPC conductor surface (Bottom side) ) Rotate down the actuator until firmly closed. It is critical that the inserted FPC/FFC is not moved and remains fully inserted. Should the FPC/FFC be moved, open the actuator and repeat the process, starting with Step 1 above. 2) The connector will assure reliable performance when the actuator is open to 1 maximum. Do not exceed this angle, as this may cause permanent damage to the connector. ) Insert the FPC/FFC straight into the insertion opening. Failing to follow this precaution can lead to damaging the FPC/FFC and altering its connectivity. FPC FFC insertion opening 4) When you insert the FPC into the insertion opening, do not apply excessive pressure or scrape the FPC on the bottom of the opening. Doing so can lead to deformities of the contacts and can hinder the performance of the connector. 2. FPC/FFC Removal 1) Lift up the actuator. 2) Carefully remove the FPC/FFC. 5) Application of excessive force to the inserted FPC/FFC may cause damage to connector and may affect the reliability of electrical connection. If specific application requires continuous or repeated pull or bend of the inserted FPC/FFC, assure that the forces are NOT transmitted directly to the connector. 9
10 NOTES : 10
11 NOTES : 11
12 Powered by TCPDF ( FH19C & FH19SC Series 0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. North California Office Stevens Creek Blvd., Ste 250, Cupertino, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 6 Professional Center Drive, Suite #100C Livonia, MI 484 Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-60 Ostfildern (Scharnhauser Park) Phone : Fax : CHINA: HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Unit 1102 A&B, Energy Plaza, 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : Fax : KOREA: HIROSE KOREA CO., LTD , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,1 Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg # CC Amsterdam Z-O Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD , Cross Tower Building, Fuzhou Road, Huang Pu District, Shanghai Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 10 8F, No.8, Zhengzhou Rd., Taipei Phone : Fax : UK: HIROSE ELECTRIC EUROPE B.V. UK BRANCH First Floor, St Andrews House, Caldecotte Lake Business Park, Milton Keynes MK 8LE Phone : Fax : CHINA: HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE Room 09-1, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 5008 Phone : Fax : SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #26- International Plaza 0990 Phone : Fax : ,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The contents of this catalog are current as of date of 11/201. Contents are subject to change without notice for the purpose of improvements.
0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors
0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator Contacts are designed to hold and stabilize the actuator
More informationHigh Current, High Density, Power Connectors
High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
More information0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
More information0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
More information0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced
More information0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series BM20 2.3mm Existing products 2.98mm Receptacle A 22.3% reduction in size! 2.98 0.4 =About 3.0mm2 Header BM20 2.3
More information0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series Receptacle Existing products BM20 2.3mm 2.98mm 10.4mm 10.48mm Existing products A 22.3% reduction in size! BM20
More information0.5 mm Pitch, Board to Board Connector with Floating Structure
0.5 mm Pitch, Board to Board Connector with Floating Structure FX20 Series X direction Floating range :0.6 0.8mm Y direction Floating range :0.6mm Features 1. 0.5 mm pitch 2. Connection type: Right angle
More information0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth Features 1. Low-profile With the
More informationUltra Low-profile Interface Connectors with 2.0 mm Mounting Height
Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the
More information0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
More information0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
More information0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More information0.5mm and 1mm Pitch FPC/FFC Connectors
0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate
More informationSubminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156HF Series Halogen Free Features 1. Low insertion loss 0.1 db typical at 6 Hz (not mated with the plug). 2. Space-saving design 2.7 mm x 2.7 mm
More information3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
rawing for the most current and accurate design information. 0.5mm and mm Pitch onnectors For FP/FF FH Series Flip-lock Features. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More informationHigh Voltage Wire-to-Board Connectors
High Voltage Wire-to-Board Connectors MDF51 Series Simple and secure mating with one push Socket Header Lock Fig.1 Features Secure hold during the soldering operation 1. Simple, one step mating Built-in
More information0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors
0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors FH55/FH55M Series Dimensions : 40 pos 4mm (depth) 23.4mm(FH55)/19.3mm(FH55M) Features 1. High-Speed Transmission(5 + Gbps)
More informationUltra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current
NEW Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current BM29 Series 20% reduction in size compared with alternate Hirose s products 3.16mm BM29 6 contacts
More information0.8mm Pitch, Compact and Robust Wire-to-Board Connectors
0.8mm Pitch, Compact and Robust Wire-to-Board Connectors DF52 Series Small and robust structure Board side Cable side Thick wall parts Thick wall parts Features 1. Small-sized connector 0.8mm Pitch, 1.75mm
More informationMiniature push-pull connectors with ground function
Miniature push-pull connectors with ground function MXR Series Jul.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Rated current Rated voltage Features
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More informationConforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-5 Overview Multi-purpose
More information0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
.4mm Pitch, 1.5 to 4.mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Jun.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. High density
More information0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors
0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors DF56 Series High contact reliability Features 1.Small mated height and board occupied space Small pitch (0.3mm) and mated height (1.25mm)
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More informationHigh Current Plug-in Connector
High Current Plug-in Connector PS3F Series Front access is best suited to the systems with limited rear access. No working space Overview High current plug-in connector Contributes
More information0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
More informationHigh Performance, Miniature Circular Connectors
High Performance, Miniature Circular Connectors HR22 Series Product specifications Ratings Rated current 2A Operating temperature range -25ç to +85 Rated voltage 100V AC, 140V DC Storage temperature range
More information0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
More informationSubminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
More informationHigh speed transmission, 1mm pitch Small Interface Connector
High speed transmission, mm pitch Small Interface Connector DH Series Overview mm contact mating pitch together with a mm mounting pitch yields a more compact, lower profile, higher density alternate to
More informationPower Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
More information1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
More informationWaterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Mating Mark Features 1. Waterproof connector designed for outdoor use Light weight, waterproof connector designed to withstand outdoor environments.
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
More information2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
More informationHigh Current Connector
High Current Connector PS2 Series and signal contacts together in one unit with dedicated power contacts to handle 100, 200 or 300 Amps. 2. Floating Structure The structure allows up to ±2.5 mm of float
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationI/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
More informationSPECIFICATION FOR APPROVAL
TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 0.50mm ZIF FPC Connector, R/A, SMT Type Bottom Contact CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 6702K-XXXX-00,20,26X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT:
More information2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationCF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationDC to 6GHz Ultra-Small Coaxial Switch
DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)
More informationHigh Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More informationENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD.
TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 1.00mm Non-ZIF FPC Connector, R/A, SMT Type Dual CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 7182K-XXXN-00X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT: 7182K-XXXN-00X
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More information-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More information125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
More informationHigh Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationSmall I/O connectors for AC adapters
Small I/O connectors for C adapters RP34 Series Sep.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Features 1. Superior mating operability snap-and-lock
More informationCONNECTING THE FUTURE. Interconnect Lighting Solutions
CONNECTING THE FUTURE Interconnect Lighting Solutions HIROSE WIRE-TO-BOARD CONNECTORS Hirose s interconnect products offer innovation, versatility and low profiles for your LED engineered designs. With
More informationHigh Power/Signal Connectors for Industrial Machinery
NEW High Power/Signal Connectors for Industrial Machinery PQ Series Variations Non water-resistant 20 position type Contact (19 A/pin) type Non water-resistant 48 position type Contact (12.5 A/pin) type
More informationCircular Connectors Supporting TÜV and MIL spec.
Circular Connectors Supporting TÜV and MIL spec. H/MS Series Product Specifications Standard products Ratings Ratings Features 1. Compatible with MIL spec. standard products 2. A ground circuit is provided
More information3.3mm Pitch Small Size Connectors for Internal Power Source
3.3mm Pitch Small Size Connectors for Internal Power Source DF33C Series Positive Lock Completely enclosed locking system Features 1. 5 mps capacity When used with 20 WG wire, this connector has a maximum
More information1mm Pitch Wire-to-Board Connectors supporting LVDS signal
1mm Pitch Wire-to-Board Connectors supporting LVDS signal FX15 Series Space saving, Equal length transmission lines Termination side:.5 mm pitch, 1-row construction Mating side: 1 mm pitch, staggered 2-row
More informationPower Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationMCF3 DC86V11CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: Cover: Terminal substrate metal: Terminal primary plating: Terminal surface plating: Adhesive: Marking: Ceramic Ceramic Copper t=0.1 mm Nickel plated copper,
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
More informationMiniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and 6 pos. Ø12.6 Features 1. Small-size with low profile 3, 6 contacts: Maximum outer diameter Ø12.6mm Mated length 32.3mm (from
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationMiniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and 6 pos. 42.1 Ø15.5 Ø12.6 10 and 12 pos. Fig.1 Features 1. Small-size with low profile 3, 6 contacts: Maximum outer diameter
More informationHalf-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
More informationMCF3 25CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web:
Version: July 12, 2018 (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018
Version: July 17, 2018 Electronics Tech. (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F,
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
More informationCircular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More information2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
More informationSFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
More information