V 40/30A. Heavy duty type, 12 amp, thread

Size: px

Start display at page:

Download "V 40/30A. Heavy duty type, 12 amp, thread"

Gladys Strickland
5 years ago
Views:

Relays 505 V 40/30A 509 4V 40A 50074 V 40/30A

4 +0.4 ) 300 F (50 C) meltfuse 5056 4V (.8 +.

5 ) ceramic 333 F (67 C) meltfuse 4V (0.8 +.

with blower #55 (not pictured) Diodes 50097

Circuit Breakers 5006 50406 504 5044 V, 30

amp,03 thread 4V, amp,03 thread V, 40 amp,03

1 Relays 505 V 40/30A 509 4V 40A V 40/30A 50 Socket for 505 and 509 Resistors 5036 V ( ) 300 F (50 C) meltfuse V ( ) V ( ) 500 V ( ) 5039 V ( ) V ( ) V ( ) V ( ) ceramic 333 F (67 C) meltfuse 4V ( ) ceramic 333 F (67 C) meltfuse 4V ( ) Resistor bracket for ceramic resistor Used with blower #55 (not pictured) Diodes Heavy duty type, amp, 03 thread Automatic Circuit Breakers V, 30 amp, /4 male terminal (Not pictured) 4V, 0 amp,03 thread 4V, amp,03 thread V, 40 amp,03 thread Junction Block thread brass studs, rated 30A, 600V. Max 30 F (50 C) Mobile Climate Control 39 MCC Reference Manual 04

Pressure Switches Pressure switches safeguard the compressor against extreme high and low pressures.

Recommended to be installed on the receiverdriers.

50038 R Male 3/8 4 50058 R Male 3/8 4 50308 R34a Male 3/8 4 50667 R34a Male 3/8 4 50343 R34a Fe 7/6 0

Part High Medium Low 50038 50058 50308 50667 50343 50674 370 (.6) 370 (.6) 3 (.5) 8 (.6) 8 (.6) 7 (0.

) Rotary Switches 5009 For 3 speed motors, 5 amp, 4 pos 50044 For 3 speed motors, 5 amp, 4 pos 50305

Switches 5009/44/8 include an A/C circuit that closes when in low, medium or high speed 50034

2 Pressure Switches Pressure switches safeguard the compressor against extreme high and low pressures. This occurs when condenser capacity is reduced or after a loss of refrigerant. Recommended to be installed on the receiverdriers. They can also be installed on special fitting with switch port R Male 3/ R Male 3/ R34a Male 3/ R34a Male 3/ R34a Fe 7/6 0 fits schrader valves R34a Fe 7/6 0 fits schrader valves Cut Out Pressure Settings Psig (MPa) Part High Medium Low (.6) 370 (.6) 3 (.5) 8 (.6) 8 (.6) 7 (0.) 7 (0.) Rotary Switches 5009 For 3 speed motors, 5 amp, 4 pos For 3 speed motors, 5 amp, 4 pos For speed motors, 5 amp, 3 pos On/off, 5 amp, pos Rotary switches include nut. Switches 5009/44/8 include an A/C circuit that closes when in low, medium or high speed Connector for 5009/ For 3 speed motors, 5 amp with resistor, 4 pos. Must be mounted in the air stream for cooling Toggle Switches Two positions Three positions 5000 For 3 speed motors, 5 amp, 4 pos Includes an A/C circuit that closes when in low medium or high speed. Mobile Climate Control 330 MCC Reference Manual 04

Thermostats All thermostats include nut 50066. Thermostats are used to prevent icing of the coil by cycling the compressor clutch. Temp settings are 6 F (3 C) cut out and 35 F ( C) cut in.

50030 50045 508 9 capillary tube 36 capillary tube As above with PVC tube protected capillary tube 50069 8003 4 capillary tube PVC tube /4 OD (Not pictured) (used to protect capillary tube, specify

, an extension wire harness can be supplied for remote control panel installations. Length.7±0.

3 Thermostats All thermostats include nut Thermostats are used to prevent icing of the coil by cycling the compressor clutch. Temp settings are 6 F (3 C) cut out and 35 F ( C) cut in. Capillary tube to be insterted at the coldest area in the coil. It must be inserted with minimum 5% of the capillary tubes total length capillary tube 36 capillary tube As above with PVC tube protected capillary tube capillary tube PVC tube /4 OD (Not pictured) (used to protect capillary tube, specify length when ordering) Stepless Blower Controller 9006 Blower Speed Kit A 3way Packard Weather Pack to Potentiometer Assy., an extension wire harness can be supplied for remote control panel installations. Length.7±0. (550±5) B way Packard Weather Pack to Blower Motor Terminals: (A) Battery A, (B) MotorB Mating Connector: MCC #3068, with terminal MCC #3039 Length 3±0. (585±.5) C 3way Packard Weather Pack to Power Input Terminals: (A) BatteryA, (B) GroundC (C) IgnitionG Mating Connector: MCC #309, with terminal MCC #3 06 Length 3±0. (585±5) No. Part No. Description Motor Stepless Control Knob Potentiometer Assy. Mobile Climate Control 33 MCC Reference Manual 04

4 Rotary Controls nut included nut included nut included Bowden Cables Stainless steel wire Specify length when ordering (Use this Bowden Cable with metal controls only.) Vinyl cover to be removed under cable clamp. Vinyl cover galvanized steel spring with plastic insert. Specify length when ordering /6 pushnut used for holding pigtails on shafts Injection Molded Rotary Control & Cable Medium duty injection molded rotary control, nut included As above but with extended shaft (3mm) nut included. Sym Part No. Description Note A mm B mm A in B in Nut 7/ Bowden Cable With adjuster Bowden Cable With adjuster Bowden Cable W/O adjuster Bowden Cable W/O adjuster Use these bowden cables with injection molded controls only Push & Pull Control Pull and push control for heavy duty use. A = 84 (4 mm) B = 90 (86 mm) Longer version of above. A = 56 (396 mm) B = 6 (44 mm) Mobile Climate Control 33 MCC Reference Manual 04

Fuse Holder INLINE FUSE HOLDER 5068 Fuse holder (in Line) Little Fuse FHAC.75 50568 Fuse 3A Little Fuse ATO 7.5.8 50569 Fuse 5A Little Fuse ATO 7.5.8 50683 Fuse 7.5A Little Fuse ATO 7.5.8 50684 Fuse 0A Little Fuse ATO 0.

5 Fuse Holder INLINE FUSE HOLDER 5068 Fuse holder (in Line) Little Fuse FHAC Fuse 3A Little Fuse ATO Fuse 5A Little Fuse ATO Fuse 7.5A Little Fuse ATO Fuse 0A Little Fuse ATO Fuse 5A Little Fuse ATO Fuse 0A Little Fuse ATO Fuse 5A Little Fuse ATO Fuse 30A Little Fuse ATO Fuse 40A Little Fuse ATO 40.8 Mobile Climate Control 333 MCC Reference Manual 04

XV. Parts. Mobile Climate Control 303

XV. Parts. Mobile Climate Control 303 XV. Parts Mobile Climate Control 303 MCC Reference Manual 2014 XV.1. Valves and O-Rings Heater Solenoids Valve 26-0348 26-0330 26-0194 Heater solenoid valve 24V 3/4 3 way 26-0348 Heater solenoid valve