SANDVIK LH514 MASS MINING LOADERS
|
|
- Dinah Warren
- 5 years ago
- Views:
Transcription
1 SANDVIK LH514 MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH514 is a high capacity Load-Haul-Dump (LHD) developed specially for underground use. By combining smart geometry with powerful thrust, high breakout forces, responsive controls and high tramming speeds it provides fast bucket filling, high fill factors and fast cycle times. The LH514 is the Mining icon since its introduction to the market. CAPACITIES Tramming capacity kg Break out force, lift kg Break out force, tilt kg Tipping load kg bucket 5.4 m³ SPEEDS FORWARD & REVERSE (LEVEL/LOADED) 1st gear 5.9 km/h 2nd gear 10.5 km/h 3rd gear 18.3 km/h 4th gear 32.7 km/h BUCKET MOTION TIMES Raising time Lowering time Dumping time 7.0 sec 4.0 sec 2.3 sec OPERATING WEIGHTS Total operating weight Front axle Rear axle kg kg kg LOADED WEIGHTS Total loaded weight Front axle Rear axle kg kg kg
2 OPERATIONAL CONDITIONS AND LIMITS Environmental temperature operating altitude From -20 C to +50 C With engine Volvo TAD1340VE from m to m at 25 C without rated power derate TRANSMISSION Power shift transmission with modulation. Dana 6422, automatic gear shift control, four gears forward and reverse. REQUIREMENTS AND COMPLIANCE Compliance with 2006/95/EC Low voltage directive Compliance with 2004/108/EC Electromagnetic compatibility directive Compliance with 2006/42/EC Machinery directive (Equipment for EU area, achieved with relevant options) Design based on EN Machines for underground mines. Mobile machines working underground. Safety. Part 1: Rubber tyred vehicles. Design based on MDG 15. Guideline for mobile and transportable equipment for use in mines. (Equipment for Australia, achieved with relevant options) AXLES Front axle, spring applied hydraulic operated brakes. Fixed. Rear axle, spring applied hydraulic operated brakes. Oscillating ± 8. TIRES Tire size (Tires are application approved. Brand and type subject to availability.) Kessler D106, limited slip differential. Kessler D106, limited slip differential. 26.5x25 L5S 36 ply Electrical system based on IEC Safety of machinery Electrical equipment of machines Part 1: General requirements CONTAINS FLOURINATED GREENHOUSE GASES (closed cabin option) Refrigerant R134a under pressure max 38 bar/550 PSI: Filled weight: 2,000 kg CO2e: 2,860 tons GWP: 1430 Information based on the F Gas Regulation (EU) No 517/2016 POWER TRAIN ENGINE Diesel engine Output Torque Number of cylinders In-line 6 Displacement Cooling system Combustion principle Air filtration Electric system Emissions Ventilation rate Particulate index Exhaust system Average fuel consumption at 50% load Fuel tank capacity CONVERTER Dana C9602 Volvo TAD1340VE rpm rpm l Liquid cooled and piston pump driven cooler fan 4-stroke, direct injection, turbo with intercooler Two stage filtrarion, dry type 24 V Tier 2, Euro Stage II CANMET 9.96 m³/s, MSHA CFM MSHA CFM Catalytic purifier and muffler, double wall exhaust pipe 33.0 l/h 560 l No lock-up OPERATOR S COMPARTMENT CABIN (Cabin option replaces the standard canopy) ROPS certification according to EN ISO 3471 FOPS certification according to EN ISO 3449 Sealed, air conditioned, over pressurized, noise suppressed closed cabin Sound absorbent material to reduce noise Laminated glass windows Cabin mounted on rubber mounts to the frame to reduce vibrations Air conditioning unit located outside the cabin to reduce noise inside the cabin Cyclone pre-filter for A/C device Adjustable joysticks No high pressure hoses in the operator s compartment Inclinometers to indicate operating angle Emergency exit Floor washable with water to reduce dust Three-point contact access system with replaceable and colour coded handles and steps 12 V output Remote circuit breaker switch CANOPY () ROPS certification according to EN ISO 3471 FOPS certification according to EN ISO 3449 Adjustable joysticks No high pressure hoses in the operator s compartment Inclinometers to indicate operating angle Emergency exit Floor washable with water to reduce dust Three-point contact access system with replaceable and colour coded handles and steps 12 V output Remote circuit breaker switch 2 / 10
3 OPERATOR S SEAT Low frequency suspension Height adjustment Adjustment according to the operator s weight Fore-aft isolation Padded and adjustable arm rests Adjustable lumbar support Selectable damping Two-point seat belt With cabin option only With cabin option only With cabin option only BUCKET HYDRAULICS The oil flow from steering hydraulic pump is directed to bucket hydraulics when steering is not used. Boom system Lift cylinders Dump cylinder Main valve Pump for bucket hydraulics Joystick bucket and boom control (electric), equipped with piston pump that delivers oil to the bucket hydraulic main valve. Z-link 160 mm, 2 pcs 200 mm, 1 pc Open center type Piston type, LS controlled CONTROL SYSTEM, DASHBOARD AND DISPLAYS Sandvik Intelligent Control system Critical warnings and alarms Instrument Panel Instrument Panel My Sandvik Digital Services Knowledge Box on-board hardware Displayed as text and with light 5.7 Display with adjustable contrast and brightness Illuminated switches BRAKES Service brakes are spring applied; hydraulically operated multidisc wet brakes on all wheels. Two independent circuits: one for the front and one for the rear axle. Service brakes also function as an emergency and parking brake. Brake system performance complies with requirements of EN ISO 3450, AS and SABS 1589 Neutral brake Automatic brake activation system, ABA Electrically driven emergency brake release pump Brake oil tank capacity 75 l FRAME REAR AND FRONT FRAME High strength structure with optimized material thicknesses. Reduced own weight for higher overall hauling capacity and long structural lifetime. Welded steel construction. Central hinge Tanks Automatic central lubrication HYDRAULICS Filling pump for hydraulic oil Door interlock for brakes and boom, bucket, and steering hydraulics Oil cooler for hydraulic and transmission oil Fittings Hoses Hydraulic oil tank capacity Sight glass for oil level STEERING HYDRAULICS Full hydraulic, centre-point articulation, power steering with two double acting cylinders. Steering lock. Steering main valve Steering hydraulic cylinders Steering pump Steering and servo hydraulic pumps Adjustable upper bearing Rear tanks are bolted to frame, hydraulic tank and cabin base are both bolted and welded to frame Electrical Capability up to 50 C ambient temperature ORFS MSHA approved 240 l 2 pcs Steering controlled by electric joystick. Open center type, LS controlled 125 mm, 2 pcs Piston type Piston type ELECTRICAL EQUIPMENT MAIN COMPONENTS Alternator Batteries Starter Driving lights Working lights Parking, brake and indicator (blinkers) lights Control system Lockable main switch Reverse alarm (CEN) Flashing beacon INCLUDED SAFETY FEATURES FIRE SAFETY Portable fire extinguisher Hot side - cold side design 24 V, 150 A 2 x 12 V, 180 Ah 9 kw, 24 V 2 pcs in front 65W 4 pcs in rear 65W 4 pcs in cabin 65W 1 pc under boom, 65W 2 pcs in front, LED lights 2 pcs in rear, LED lights 5,7 Color display, 5 modules, inbuilt system diagnostics Isolation of combustibles and ignition sources Heat insulation on exhaust manifold, turbo, and isolated exhaust pipe 12 kg (CEN) 3 / 10
4 ENERGY ISOLATION Lockable main switch, ground level access Emergency stop push buttons according to EN ISO Pressure release in the radiator cap Automatic discharge for pressure accumulators (brake system and pilot circuit) Frame articulation locking device Mechanical boom locking device Wheel chocks and brackets 1 pc in cabin 2 pcs in rear ALTERNATIVE ENGINES Engine Volvo TAD1171VE, 265 kw, 2100 rpm, Euro Stage IV, MSHA, Canmet (Tier 4f). Applicable from m to m at 25 C without rated power derate. Ultra low sulphure fuel and AdBlue required. CANMET ventilation rate 5,90 m3/s. MSHA ventilation rate CFM and particulate index 1500 CFM. Average fuel consumption at 50 % load 35 l/h. Engine Volvo TAD1350VE, 256 kw, 1900 rpm, Euro Stage III. Applicable from m to m at 25 C without rated power derate. ELECTRICAL OPTIONS Jump start interface Monitoring camera system DOCUMENTATION STANDARD MANUALS Operator s Manual Maintenance Manual Parts Manual Service and Repair Manual ToolMan Decals OPTIONS English and other EU languages English and other EU languages English English, Russian, French 2 x CD and 2 x USB stick in pdf format, includes all the manuals English, Finnish, Swedish, Spanish, Russian, French, Polish, Portuguese, Turkish, German, Norwegian, Estonian, Chinese, Greek OTHER OPTIONS Additional cabin heater element for air conditioning Cover grills for lamps Converter with lock-up, Dana SOH Spare rim /3.0 (for tires ) Boom suspension (ride control) Wiggins quick filling set for fuel and oils (hydraulic, engine and transmission) Integrated weighing system Electirc loader towing kit Accordance with CE norms (CEN) EXTRA ITEM No spin rear axle Cold climate package SAFETY OPTIONS Safety cabin, 2-point seatbelt, corner light, ROPS/FOPS and A/C unit. Cabin lift kit (150 mm) Disabled 4th gear (mandatory in EU) Radio remote control HBC CAN Radio remote control interface HBC, analoque, not with automation Recovery kit (brake release by pulling the hook) Video camera system for Radio remote control Proximity Detection Interface Driving direction lights (red / green) LED lights (Replaces standard driving lights) Fire suppression system ANSUL, 2 tanks, 8 nozzles (CEN) including auto engine shutdown (not for automation) Fire suppression system ANSUL, 2 tanks, 8 nozzles (CEN), Checkfire including auto engine shutdown Fire suppression system Sandvik FS1000 with auto engine shutdown, Eclipse foam delivered separately Extra fire extinguisher 12kg Safety rails Emergency steering (CEN) AutoMine TM Onboard Package AutoMine TM Loading, readiness 4 / 10
5 GRADE PERFORMANCE Volvo TAD1340VE Empty Percent grade Ratio 1:12 1:10 1:8 1:7 1st gear (km/h) nd gear (km(h) rd gear (km/h) th gear (km/h) Loaded Percent grade Ratio 1:12 1:10 1:8 1:7 1st gear (km/h) nd gear (km(h) rd gear (km/h) th gear (km/h) / 10
6 DIMENSIONS 6 / 10
7 DIMENSIONS Bucket alternatives (m³) 4.6 m³ 5.0 m³ 5.4 m³ 6.2 m³ 7.0 m³ Material broken density (kg/m³) max kg/m³ max kg/m³ max kg/m³ 2400 kg/m³ 2000 kg/m³ Lip plate type Bare Lip Bare Lip Bare Lip Bare Lip Bare Lip L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) L6 (mm) L7 (mm) L8 (mm) L9 (mm) L10 (mm) H1 (mm), CC H1 (mm), OC H2 (mm) H3 (mm) H4 (mm) H5 (mm) H6 (mm) H7 (mm) H8 (mm) H9 (mm) H10 (mm) H11 (mm) W1 (mm) W2 (mm) W3 (mm) W4 (mm) A A R1, left turn (mm) R2, left turn (mm) T, left turn (mm) R1, right turn (mm) R2, right turn (mm) T, right turn (mm) / 10
8 DIMENSIONS Bucket alternatives (m³) 4.6 m³ 5.0 m³ 5.4 m³ 6.2 m³ 7.0 m³ Material broken density (kg/m³) max kg/m³ max kg/m³ max kg/m³ 2200 kg/m³ 1900 kg/m³ Lip plate type GET GET GET GET GET L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) L6 (mm) L7 (mm) L8 (mm) L9 (mm) L10 (mm) H1 (mm), CC H1 (mm), OC H2 (mm) H3 (mm) H4 (mm) H5 (mm) H6 (mm) H7 (mm) H8 (mm) H9 (mm) H10 (mm) H11 (mm) W1 (mm) W2 (mm) W3 (mm) W4 (mm) A A2 42,5 42,5 42,5 42,5 42,5 R1, left turn (mm) R2, left turn (mm) T, left turn (mm) R1, right turn (mm) R2, right turn (mm) T, right turn (mm) / 10
9 DIMENSIONS Bucket alternatives (m³) 5.4 m³ 6.2 m³ 7.0 m³ Material broken density (kg/m³) max kg/m³ max kg/m³ 1900 kg/m³ Lip plate type Half Arrow Half Arrow Half Arrow L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) L6 (mm) L7 (mm) L8 (mm) L9 (mm) L10 (mm) H1 (mm), CC H1 (mm), OC H2 (mm) H3 (mm) H4 (mm) H5 (mm) H6 (mm) H7 (mm) H8 (mm) H9 (mm) H10 (mm) H11 (mm) W1 (mm) W2 (mm) W3 (mm) W4 (mm) A A2 42,5 42,5 42,5 R1, left turn (mm) R2, left turn (mm) T, left turn (mm) R1, right turn (mm) R2, right turn (mm) T, right turn (mm) / 10
10 Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options. Sandvik Mining and Rock Technology 2017 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries 10 / 10
SANDVIK LH307 NARROW VEIN LOADER
SANDVIK LH307 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH307 is a 6.7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development
More informationSANDVIK LH514E MASS MINING LOADERS
SANDVIK LH514E MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH514E is a high capacity electric Load-Haul- Dump (LHD) developed specially for underground use. It emits very low noise and no exhaust
More informationSANDVIK LH517 MASS MINING LOADERS
SANDVIK LH517 MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH517 is a high capacity Load-Haul-Dump (LHD) featuring excellent safety, productivity and reliability. It has a unique fast and efficient
More informationSANDVIK TH540 UNDERGROUND TRUCK
SANDVIK TH540 UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH540 is a high performance 40 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health
More informationSANDVIK TH320 UNDERGROUND TRUCK
SANDVIK TH320 UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH320 is a narrow 20 metric tonne hauler that fits in a 3 x 3 meter heading. Available with a standard forward facing, open operators
More informationSANDVIK TH545i UNDERGROUND TRUCK
SANDVIK TH545i UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH545i is a high performance 45 tonne articulated underground dump truck for use in 4.5 x 4.5 meter haulage ways. Truck s performance
More informationSANDVIK LH208L LOW PROFILE LOADER
SANDVIK LH208L LOW PROFILE LOADER TECHNICAL SPECIFICATION Sandvik LH208L is a 7.7 tonnes capacity underground low-profile LHD designed to work in low profile room and pillar mining and extra low profile
More informationSANDVIK LH202 NARROW VEIN LOADER
SANDVIK LH202 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Sandvik LH202
More informationSANDVIK LH517i intelligent LOADER
SANDVIK LH517i intelligent LOADER TECHNICAL SPECIFICATION Sandvik LH517i is a high capacity Load-Haul-Dump (LHD) for use in 5 x 5 meter mining tunnels. This intelligent loader features many improvements
More informationSANDVIK LH621i intelligent LOADER
SANDVIK LH621i intelligent LOADER TECHNICAL SPECIFICATION The new Sandvik LH621i is a 21 tonne loader designed for rapid mine development and large scale underground mine production. With superior hydraulic
More informationSandvik LH307 Technical Specification
Technical Specification APPLICATIONS is a 6,7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development work, mining and tunnelling construction.
More informationSandvik LH203 Technical Specification
2014-01-16 Technical Specification APPLICATIONS is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Capacities Tramming capacity 3 500
More informationSandvik TH551 Technical Specification
Spec. number TH551-05 2014-08-14 Technical Specification APPLICATIONS The is a high performance 51 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health
More informationSandvik TH430 Technical Specification
Technical Specification APPLICATIONS The is a true 30 metric tonne articulated mine dump truck that will fit in a 4 x 4 m envelope. The TH430 is equipped with a standard, fully enclosed, vibration isolated,
More informationSANDVIK LH204 UNDERGROUND LOADER
UNDERGROUND LOADER Sandvik LH204 is designed to give maximum tramming capacity in narrow mining and tunneling applications. The hydrostatic drive system delivers high tractive effort for maximum penetration
More informationSandvik TH663 Technical Specification
Spec. number TH663-04 Technical Specification APPLICATIONS The is a high productivity 63 tonne articulated underground dump truck for use in 6 x 6 meter haulage ways. Operator safety, health and comfort
More informationScooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity 1 Superior underground mucking The Scooptram ST14 is full with features that makes it powerful and yet fuel efficient and the thorough improvements
More informationScooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity Scooptram ST14 Superior underground mucking The new Scooptram ST14 is full with new features that makes it more powerful and yet more fuel efficient.
More informationScooptram ST7 Battery. Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader
Scooptram ST7 Battery Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader 1 Cutting costs and boosting productivity with smart solutions The
More informationScooptram ST7LP. Low-profile underground loader with 6.8-tonne capacity
Scooptram ST7LP Low-profile underground loader with 6.8-tonne capacity 1 Superior productivity in low seam applications The low-profile Scooptram ST7LP with a back height of only 1.6 M is a robust underground
More informationScooptram ST7. Underground small size loader with 6.8-tonne capacity
Scooptram ST7 Underground small size loader with 6.8-tonne capacity 1 The latest technology in narrow vein mining The Scooptram ST7 is a robust loader which is built for demanding underground applications
More informationSandvik TH320. General Arrangement
Technical Specification TH3-Revision 1 1/10 General Arrangement 65 96 in (2438) 179 in (4547) TH3 13 TH3 90 in (2286) 12 in (305) 54 in (1372) 358 in (9093) 174 in (44) 83 in (2108) 13 in (330) 87 in (2210)
More informationEJC 65 UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) TECHNICAL SPECIFICATION 1-3
1-3 EJC 65 TECHNICAL SPECIFICATION UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) 1-4 EJC 65 Main Dimensions 65 EJC 65 1-5 SANDVIK TAMROCK EJC Loaders Division EJC 65 Specification Sheet January 1, 2000
More informationScooptram ST2G. Underground diesel loader with 4 tonne load capacity
Scooptram ST2G Underground diesel loader with 4 tonne load capacity 1 Popular underground loader The scooptram ST2G is a popular choice for applications varying from mine development, production in small
More informationSCOOPTRAM ST7. Underground, small size loader with 6.8-tonne capacity
SCOOPTRAM ST7 Underground, small size loader with 6.8-tonne capacity SCOOPTRAM ST7 THE LATEST TECHNOLOGY IN NARROW VEIN MINING THE SCOOPTRAM ST7 IS A ROBUST LOADER THAT IS BUILT FOR DEMANDING UNDERGROUND
More informationSCOOPTRAM ST7 BATTERY
SCOOPTRAM ST7 BATTERY Power Unleashed Delivering unparalleled productivity, Scooptram is the most reliable underground loader on the market. The New Scooptram ST7 is fully battery powered and fully automation
More informationHeight of safety canopy Height of dump box. Dumping angle 65. Standard box volume 10.2 m³ Dump box volume (SAE) m³
The Sandvik TH320 is a narrow 20 metric tonne hauler that fits in a 3 x 3 metre heading. Available with a standard forward facing, open operators compartment or an optional forward facing, fully enclosed
More informationEJC 30SX 1 EJC 30SX. Technical Specification. Payload: 33 tons (30 tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) ISO 9001:2000 FM 62442
EJC SX 1 EJC SX Technical Specification Payload: 33 tons ( tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) 2 EJC SX General Arrangement 65 2 in (2591) 96 in (2438) 96 in (2438) 195 in (4953) 13 358 in
More informationEJC 430 TECHNICAL SPECIFICATION. Payload: 30 tons (27.3 tonnes) Dump box volume: 20.7 yd³ (15.3 m³) We are an ISO 9001 Registered Company EJC 430 1
EJC 430 1 EJC 430 TECHNICAL SPECIFICATION Payload: 30 tons (27.3 tonnes) Dump box volume:.7 yd³ (.3 m³) 02, EJC Loaders Division reserves the right to change this 2 EJC 430 General Arrangement 65 o 430
More informationMINETRUCK MT42. Underground truck with 42-tonne load capacity
MINETRUCK MT42 Underground truck with 42-tonne load capacity MINETRUCK MT42 SUPERIOR UNDERGROUND HAULAGE THE MINETRUCK MT42 IS A HIGH SPEED, 42-TONNE ARTICULATED UNDERGROUND TRUCK, FEATURING STATE-OF-THE-ART
More informationEJC EJC 522. Technical Specification. Payload: 20 tonnes (22 tons) Dump box volume (SAE): 10.2 m³ (13.4 yd³) ISO 9001:2000 FM 62442
EJC 522 1 EJC 522 Technical Specification Payload: tonnes (22 tons) Dump box volume (SAE):.2 m³ (13.4 yd³) 2 EJC 522 General Arrangement 65 83 96 in (2438) 90 in (2286) 179 in (4547) 13 358 in (9093) 174
More informationMinetruck MT42. Underground truck with 42-tonne load capacity
Minetruck MT42 Underground truck with 42-tonne load capacity 1 Superior underground haulage Minetruck MT42 is a high speed, 42-metric tonne articulated underground truck, featuring state-of-the-art levels
More informationMINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity
MINETRUCK MT2010 Underground articulated truck with 20-tonne load capacity MINETRUCK MT 2010 COMPACT AND QUICK FOR EFFICIENT HAULAGE MT2010 IS AND ARTICULATED UNDERGROUND TRUCK WITH A LOAD CAPACITY OF
More informationMINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity
MINETRUCK MT5020 Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 FAST, EFFICIENT UNDERGROUND HAULAGE MT5020 IS AN ARTICULATED UNDERGROUND TRUCK WITH 50 METRIC TONNES LOAD CAPACITY.
More informationScooptram EST1030. Electric underground loader with 10-tonne capacity
Scooptram EST1030 Electric underground loader with 10-tonne capacity 1 Electrically powered to save energy, time and money The Scooptram EST1030 is a fast, electrically powered loader with a 10 tonne capacity
More informationMinetruck MT431B. Underground articulated truck with 28.1-metric tonne load capacity
Minetruck MT431B Underground articulated truck with 28.1-metric tonne load capacity 1 Reliable underground haulage Minetruck MT431B is a high speed, articulated underground truck, featuring state-of-the-art
More informationSCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity
SCOOPTRAM EST1030 Electric underground loader with 10-tonne capacity ELECTRICALLY POWERED TO SAVE ENERGY, TIME AND MONEY THE SCOOPTRAM EST1030 IS A FAST, ELECTRICALLY POWERED LOADER WITH A 10 -TONNE CAPACITY
More informationMINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity
MINETRUCK MT431B Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B RELIABLE UNDERGROUND HAULAGE THE MINETRUCK MT431B IS AN ARTICULATED UNDERGROUND TRUCK WITH A 28.1-METRIC
More informationEJC 430 READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC 430 WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK
EJC READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK POWERED WITH A DETROIT SERIES ENGINE MILITARY SPECIFICATION WIRING WILLIAMS OPERATING SPECIFICATION
More informationMinetruck MT436LP. Underground truck with 32.6-tonne load capacity
Minetruck MT436LP Underground truck with 32.6-tonne load capacity 1 Reliable underground haulage for low seam operations Minetruck MT436LP is an underground truck with a 32.6-metric tonne load capacity.
More informationMINETRUCK MT65. Underground truck with 65-tonne load capacity
MINETRUCK MT65 Underground truck with 65-tonne load capacity MINETRUCK MT65 EFFICIENT UNDERGROUND HAULAGE ENGINEERED WITH SAFETY, PRODUCTIVITY AND OPERATOR COMFORT IN MIND FOR HAULAGE IN LARGER UNDERGROUND
More informationMinetruck MT65. Underground truck with 65-tonne load capacity
Minetruck MT65 Underground truck with 65-tonne load capacity Minetruck MT65 Efficient underground haulage Engineered with safety, productivity and operator comfort in mind for haulage in larger underground
More informationEJC 417 A COMPACT TRUCK DESIGNED FOR THE MOST CHALLENGING WORK CAPACITY: 17 SHORT TONS (15.4 TONNES) TECHNICAL SPECIFICATION 2-3
2-3 EJC 417 TECHNICAL SPECIFICATION A COMPACT TRUCK DESIGNED FOR THE MOST CHALLENGING WORK CAPACITY: 17 SHORT TONS (.4 TONNES) Revision Date: /4/01 2-4 EJC 417 Main Dimensions 88 (2235) 8 (3) 11 (279)
More informationp~åçîáâ=ieomrijj qéåüåáå~ä=a~í~
p~åçîáâ=ieomrijj qéåüåáå~ä=a~í~ ^mmif`^qflkp The Sandvik LHL is designed to work in low profile room and pillar mining and extra low profile reef mining. Back heights as low as 1.6 m Low profile mine production
More informationMinetruck MT54. Underground truck with a load capacity of 54 metric tonnes
Minetruck MT54 Underground truck with a load capacity of 54 metric tonnes Minetruck MT54 Productive underground haulage Minetruck MT54 is a high-capacity underground truck in a compact design, engineered
More informationMinetruck MT54. Underground truck with a load capacity of 54 metric tonnes
Minetruck MT54 Underground truck with a load capacity of 54 metric tonnes 1 Productive high capacity underground haulage Minetruck MT54 is a high-capacity underground truck in a compact design, engineered
More informationp~åçîáâ=ieomui qéåüåáå~ä=a~í~
p~åçîáâ=ieui qéåüåáå~ä=a~í~ ^mmif`^qflkp The Sandvik LH208L is an 8 tonne LHD designed to work in low profile room and pillar mining and extra low profile reef mining. Back heights as low as 1.8 m Low
More informationWA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm.
WA100M-8 EU Stage IV Engine WHEEL LOADER ENGINE POWER 69,8 kw / 93,6 HP @ 2.000 rpm OPERATING WEIGHT 6.925-7.230 kg BUCKET CAPACITY 1,05-1,8 m³ 2 Walk-Around ENHANCED FUEL EFFICIENCY AND ENVIRONMENTAL
More informationR1300G II Underground Mining Loader. Name Venue Date
R1300G II Underground Mining Loader Name Venue Date Machine Specifications Gross Power SAE 136 kw (182 hp) @ 2200 RPM Engine Model CAT C6.6 ACERT Speeds Forward kph mph 1st 5.3 3.2 2nd 10.1 6.2 3rd 18.1
More informationScooptram ST2D. Underground diesel loader with 3.6 tonne load capacity
Scooptram ST2D Underground diesel loader with 3.6 tonne load capacity 1 Hardened loader For small and narrow vein mines A parallel boom design matched to an aggressive bucket configuration provides efficient
More informationLH410 (TORO 7) From the underground experts. Sandvik Mining and Construction
LH410 (TORO 7) From the underground experts What is CORE SAFETY Built-in safety features to protect the operator & the machine EFFICIENCY Lowest cost per loaded ton ERGONOMICS Excellent operator concentration
More informationPCSERIES - LP12. Personnel Carrier Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground personnel carrier vehicle.
PCSERIES - LP12 Personnel Carrier Vehicle AT A GLANCE FEATURES & BENEFITS Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 26,000 lbs (11,818 kg) 29-8 (9.05 m) 7-3 (2.2 m) Tramming
More informationMATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.
MHL35 E TIER 4i MATERIAL HANDLER Specifications Operating weight 7,548-78,264 lbs (32 35.5 t) Engine output 214 hp (16 kw) Reach up to 52.5 ft (16 m) Features Fuel efficient high output engine with a reduction
More informationUtimec LF 600 Agitator
Pictured machine may include options and additional equipment. Features Utimec LF 600 Agitator with practical concrete transport capacity of 6 m 3 is designed for concrete transportation in underground
More informationMinetruck MT2200. Articulated underground truck with 22-tonne load capacity
Minetruck MT2200 Articulated underground truck with 22-tonne load capacity 1 Productive and reliable operations Minetruck MT2200 is a high-capacity truck built for fast, efficient underground haulage.
More informationWHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version
ZW series Parallel linkage tool carrier version WHEEL LOADER WHEEL LOADER Model Code: ZW140PL / ZW150PL / ZW1PL Operating Weight: ZW140PL: 11 950-12 010 ZW150PL: 13 370-13 400 ZW1PL: 15 240-15 430 Bucket
More informationMATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m
MHL35 E MATERIAL HANDLER Specifications Standard Machine Weight Engine output Reach 75, lbs 34 t 215 hp 16 kw Up to 52.5 ft 16 m Features Fuel saving ECO & ECO+ operating modes enhance flexibility while
More informationRMS. RMS18 Scaler SERIES -LP15 RMS SERIES SALES SPECIFICATIONS OPTIONS FEATURES & BENEFITS
RMS SERIES SALES SPECIFICATIONS RMS SERIES -LP15 RMS18 Scaler FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width ~ 45,365lb (20,700kg) ~ 34 (10.3m)
More informationUtimec LF 600 Transmixer
Pictured machine may include options and additional equipment. Features Utimec LF 600 Transmixer with practical concrete carrying capacity of 5.6 m 3 is designed for heavy concrete transportation in underground
More informationUtimec LF 700 Agitator
Pictured machine may include options and additional equipment. Features Utimec LF 700 Agitator with practical concrete transport capacity of 7 m 3 is designed for concrete transportation in underground
More informationScamec 2000 Breaker. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 Breaker is a self propelled diesel driven unit for mechanized breaking in underground mining and tunnelling. Scamec consist
More informationigh-performance, low environmental impact diesel engine: quiet, low emissions, economical fuel consumption.
VOLVO WHEEL LOADER L50F ross Power : G SAE J19 = 87 kw/ 117 hp N et Power : SAE J1349 = 85 kw/ 115 hp O perating Weight : 9.4 9.9 t B ucket Capacities : 1.4 2.5 m3 igh-performance, low environmental impact
More informationDL350 TECHNICAL DATA
DL350 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL08 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER (GROSS) hp / rpm 232 / 2,000 (SAE J1995) kw / rpm 172 / 2,000 RATED
More informationCharmec MF 605 DA. Features. Technical data sheet USA & Canada
Pictured machine may include options and additional equipment. Features Charmec MC 605 ANFO charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationHITACHI LX290E. engine rated power 228 kw / 306 HP. operating weight kg. bucket capacity m 3
HITACHI LX290E engine rated power 228 kw / 306 HP operating weight 21 455-23 075 kg bucket capacity 4.0-4.5 m 3 EQUIPMENT Engine Steering Make............................................. Isuzu Model........................................
More informationMATERIAL HANDLER MHL360 D. Specifications. Features
MHL360 D MATERIAL HANDLER Specifications Operating Weight Engine Output Reach 97,003 lbs - 101,413 lbs 249 hp Up to 59 ft Features Powerful, fuel efficient 249 hp engine matched with hydraulic functions
More informationFLSERIES - LP12. Fuel Lube Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground fuel lubrication vehicle.
FLSERIES - LP12 Fuel Lube Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 27,000 lb (12,273 kg) 27-2 (8.3 m) 7-0 (2.13 m) Tramming Height Carrier Articulation
More informationCat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.
Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator
More informationMultimec MF 100. Features. Technical data sheet USA & Canada
Pictured machine may include options and additional equipment. Features Multimec provides an innovative system for material transport in mines: a multipurpose system that allows the operator to perform
More informationMultimec SF 060. Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Multimec provides an innovative system for material transport in mines: a multipurpose system that allows the operator to perform
More informationUtimec LF 700 Agitator
Pictured machine may include options and additional equipment. Features Utimec LF 700 Agitator with practical concrete transport capacity of 7 m 3 is designed for concrete transportation in underground
More informationL45B VOLVO COMPACT WHEEL LOADER
VOLVO COMPACT WHEEL LOADER L45B Gross Power: SAE J1995 81/110 kw/hp Net Power: SAE J1349 73/99 kw/hp Operating Weight: 8,2-8,4 t Capacities: 1,3-2,5 m 3 High-performance, low environmental impact diesel
More informationPersonnel Carrier Vehicle
PCSERIES - LP15 Personnel Carrier Vehicle FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 32,000 lbs (14,545 kg) 31-8 (9.7m) 7-3 (2.21m) Tramming
More informationDL250 TECHNICAL DATA
DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationSLSERIES - LP12. Scissorlift Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground scissorlift vehicle.
SLSERIES - LP12 Scissorlift Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 31,000 lbs (14,091 kg) 27-2 (8.29 m) 7-0 (2.13 m) Tramming Height Carrier Articulation
More informationDoosan Infracore DL220 TECHNICAL DATA
Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)
More informationDL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationCharmec LC 605 D(V) Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross
More informationTechnical Specifications
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach
More information534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)
534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice
More informationTechnical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary
Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb
More informationCharmec LC 605 D(V) Features. Technical data sheet
Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross
More informationCrane Utility Vehicle
CVSERIES - LP15 Crane Utility Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 32,000 lbs (14,545 kg) 28-7 (8.7m) 8 (2.44m) Tramming Height Carrier Articulation
More informationScamec 2000 L. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 L is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
More informationScamec 2000 M. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 M is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
More informationMATERIAL HANDLER MHL320 D. Specifications. Features
MHL D MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach, lbs 9 t hp kw Up to ft. m Features Fuel efficient and powerful, the hp kw turbo diesel engine enables movement of loads
More informationLX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm
S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40
More informationTELESCOPIC ARTICULATED LOADERS T750
TELESCOPIC ARTICULATED LOADERS T750 PERFORMANCE POWER and PERFORMANCE REACH NEW HEIGHTS WITH GEHL 4'8" EXTENSION EXTENDED HEIGHT A telescopic lift arm takes maximum lift height from 12'10" (3911 mm) and
More informationCharmec MC 605 D(V) Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Charmec MF 605 D charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationUtimec SF 060 Material
Pictured machine may include options and additional equipment. Features Utimec SF 060 Material vehicle is designed for material transportation in small or medium size tunnel cross sections. With the transport
More informationTechnical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach
More informationSpraymec MF 050 VC. Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Spraymec MF 050 VC is an electrohydraulic self-propelled mobile concrete sprayer for modern mining operations in small and medium
More informationMATERIAL HANDLER MHL360 F HD. Features. Specifications
MHL360 F HD MATERIAL HANDLER Features Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic functions
More informationTechnical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (
More informationENGINE HYDRAULIC SYSTEM. TRANSMISSION 5 speed T/M 4 speed T/M Travel speed STEERING SYSTEM AXLES SERVICE REFILL CAPACITIES OVERVIEW CAB TIRES SOUND
ENGINE Engine / Model Cummins / QSB6.7 Maximum Gross Power (2,200 rpm) SAE J1995 168 kw 225 hp Maximum Net Power (2,200 rpm) SAE J1349 166 kw 222 hp Peak Gross Torque (1,500 rpm) SAE J1995 1044 N m 770
More informationTM15 - LP15. Mobile Rockbreaker AT A GLANCE OPTIONS FEATURES & BENEFITS
TM15 - LP15 Mobile Rockbreaker FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 45,100 lb (20,500 kg) 32-0 (9.7 m) 7-1 (2.16 m) Tramming Height
More informationCharmec MF 605 DA. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Charmec MC 605 ANFO charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationSpraymec SF 050 D. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Spraymec SF 050 D is a diesel-hydraulic self-propelled mobile concrete sprayer for modern mining operations in small and medium size
More information1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation
1021F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Case / FPT Model F2CFE614C Tier 4 interim certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore / Stroke 4.61 in x 5.31 in (177
More informationSemmco Alpha 30. Features. Technical data sheet
Equipment includes options and extra equipment. Features Semmco Alpha 30 is a diesel hydraulic mobile concrete sprayer designed for tunnel profiles up to 7 m in height and 9 meters in width. The maximum
More information