Eclipse LED Hyperion LED ASSEMBLY INSTRUCTIONS

Size: px

Start display at page:

Download "Eclipse LED Hyperion LED ASSEMBLY INSTRUCTIONS"

June Gibson
5 years ago
Views:

1 Eclipse LED Hyperion LED ASSEMBLY INSTRUCTIONS

2 Eclipse LED - Hyperion LED QUALIFIED STAFF OFF IP=> LAMPS Connection and maintenance of the luminaire must be carried out by trained and qualified staff only, in compliance with the regulation in force. Make sure there is no power connected to the fitting before carrying out any maintenance The protection rating of the electrical connection must be equal to or greater than the IP rating of the luminaire Keep away from aggressive agents and chemical substances (e.g. fertilizer, weed-killer, lime). In case of break of the glass/ diffuser use original spare parts only. It is mandatory to install the power supply in a suitable electrical enclosure. All luminaires have to undergo regular maintenance according to the following steps: - Check the fastening of the screws. - Inspect cables and cable glands for any possible damage. - Check the fastening of cable glands. - Check if seals are in working order. - Defect or damaged components must be replaced before switching the luminaire on. Use original spare parts only. It is important to carry out luminaire maintenance at each bulb substitution or at least once per year. Any improper use or installation, any tampering or any unauthorised modification of the luminaire causes the immediate expiry of the warranty on the luminaire and of any claim against the manufacturer. Should Designplan Lighting allow the return of a luminaire for technical inspection or tests, they must be returned with a piece of wiring cable (10-20cm connected to the luminaire).

3 Eclipse LED - Hyperion LED IP65 U U U COOL WHITE 6000K MID-POWER LEDs 7.5W/ NATURAL WHITE 4000K MID-POWER LEDs 7.5W/ WARM WHITE 3000K MID-POWER LEDs 7.5W/ ECLIPSE LED For safety to be assured, the fitting has to be instal-led and used properly, in compliance with local regulations and Directives on electrical and electronic equi-pments and with the mounting instructions included in the present box: please keep this instruction data sheet for future reference. Dust-tight and protected against waterjets IP65 Suitable for installation on normally flammable surfaces U COOL WHITE 6000K MID-POWER LEDs 7.5W/ HYPERION LED At the end of its usefull lifespan, the product must be disposed of separataly from ordinary household wastes. The user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. Appropriate separate collection to permit recycling, treatment and environmentally compatible disposal helps prevent negative impact on the environ-ment and human health and promotes recycling of the materials making up the product. For more informantion on available collection facilities, contact your local waste collection service. U NATURAL WHITE 4000K MID-POWER LEDs 7.5W/ U WARM WHITE 3000K MID-POWER LEDs 7.5W/

4 Eclipse LED INSTALLATION ON WALL WIRING * FIX THE METAL PLATE BY RESPECTING THE POSITION (2 HOLES FOR FIXING BOLTS AND 1 FOR CABLE WHICH HAS TO BE UNDER THE PLATE)! * 7.09" STEP 1 STEP 2 STEP 3 STEP 4

5 Eclipse LED - Hyperion LED USE ONLY WITH CLASS II POWER UNIT DRIVER The individual lamps must be connected in parallel. Only power up the system once all the lamps have being connected.

6 MiniMartina Hyperion - Martina LED INSTALLATION ON WALL WIRING STEP 1 STEP 2 STEP STEP 4 STEP 5 SATIN PLATE FIXING (OPTIONAL) CODE 160 1! * 1 *CLEAN THE FIXING SURFACE WITH ALCOHOL OR SOLVENT BEFORE GLUING THE PLATE 2

Operating Instruction for Downlights

Operating Instruction for Downlights Type: ES_T4_1027_SILVER/ ES_T5_1027_WHITE/ ES_T6_1017_SILVER/ ES_T7_1017_WHITE/ ES_T8_1047_SILVER/ ES_T9_2019_WHITE/ ES_T10_1044_SILVER Index 1. General safety information...