Self-contained, single color, electronic plural component paint proportioner, with carbon steel UltraMix Pump and cart. For professional use only.

Size: px
Start display at page:

Download "Self-contained, single color, electronic plural component paint proportioner, with carbon steel UltraMix Pump and cart. For professional use only."

Transcription

1 Repair - Parts 004G EN Self-contained, single color, electronic plural component paint proportioner, with carbon steel UltraMix Pump and cart. For professional use only. 50 psi (.7 MPa, 7 bar) Maximum Fluid Working Pressure Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Model 490 Clear Coat System Shown See page for model information, including maximum working pressure. TI684a Conforms to FM std 600 & 60 for use in Class I Div Group D T Hazardous Locations CAN/CSA. No & No

2 Contents Manual Conventions ProMix Easy Models Related Manuals Warnings Pressure Relief Procedure (Models 490 and 49) Fluid Manifold to Gun Pump to Fluid Manifold Pressure Relief Procedure (Model 5896) Fluid Manifold to Gun Pump to Fluid Manifold Maintenance Preventive Maintenance Schedule Dispense Valve Pump Turbine Alternator Air Filters Pump Test Wet Cup Storage Troubleshooting Alarms Repair Replacing Air Filter Element User Interface Pneumatic Control Dispense Valve Assembly Pump Assembly Remote Mix Manifold and Fluid Regulator (490 and 49 only) Electrical Schematic Main Control Board Schematic Parts Part No. 490 Clear Coat System, Series A (shown) Part No. 49 Primer System, Series A Part No Primer System, Series A (shown) Part No. 490 Proportioner, Series A Pneumatic Schematic Pump Air Control Intrinsically Safe Pneumatic Control User Interface Pump Inlet Valve Assembly, for 490 Clear Coat System only Pump Outlet Valve Assembly, for 490 Clear Coat System only Dispense Valve Assembly, for 490 Clear Coat System Dispense Valve Assembly, for 49 Primer System Hose Bundle and Remote Mix Manifold, for 490 Clear Coat System Hose Bundle and Remote Mix Manifold, for 49 Primer System Remote Mix Manifold (490 and 49 only) Technical Data Graco Standard Warranty Graco Information G

3 ProMix Easy Models ProMix Easy Models Approved for Hazardous Location Class I, Div, Group D (North America) ProMix Easy Part No. Series Description and Approvals 490 A Clear coat system; cart mount, UltraMix carbon steel pumps, and remote mix manifold 49 A Primer system; cart mount, UltraMix carbon steel pumps, and remote mix manifold 5896 A Primer system; cart mount, UltraMix carbon steel pumps, standard mix manifold, and automatic flush valves Maximum Working Pressure psi (MPa, bar) 50 (.7, 7) 50 (.7, 7) 50 (.7, 7) Related Manuals Manual Description 00 ProMix Easy Operation Manual 0655 Dispense Valve 066 Displacement Pumps 067 UltraMix Pumps 067 Circulation Kits 0674 Mounting Kits 0675 AC Power Supply 0678 TSL Pump Kits 0800 Auto Flush Kit 0700 Gun Air Regulator Kits Manual Description 44 AirPro Pressure Feed Airspray Gun 096 Data Download Kits 0804 Turbine Alternator Repair Kit 0867 Low Volume Air Regulators 0869 Pressure Tanks 087 Agitators 0875 Pressure Tank Bottom Outlet Kit 0855 Husky 07 AODD Pumps 07 Fluid Pressure Regulators 004G

4 Warnings Warnings The following general warnings are related to the safe setup, use, grounding, maintenance and repair of this equipment. Additional more specific warnings may be found throughout the text of this manual where applicable. WARNING FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion: Use equipment only in well ventilated area. Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc). Keep work area free of debris, including solvent, rags and gasoline. Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present. Ground all equipment in work area. See Grounding instructions. Use only grounded hoses. Hold gun firmly to side of grounded pail when triggering into pail. If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem. Keep a fire extinguisher in the work area. PRESSURIZED EQUIPMENT HAZARD Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury. Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment. Tighten all fluid connections before operating the equipment. Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately. EQUIPMENT MISUSE HAZARD Misuse can cause death or serious injury. Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals. Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer s warnings. Check equipment daily. Repair or replace worn or damaged parts immediately. Do not alter or modify equipment. For professional use only. Use equipment only for its intended purpose. Call your Graco distributor for information. Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not kink or overbend hoses or use hoses to pull equipment. Comply with all applicable safety regulations G

5 Warnings WARNING MOVING PARTS HAZARD Moving parts can pinch or amputate fingers and other body parts. Keep clear of moving parts. Do not operate equipment with protective guards or covers removed. Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply. TOXIC FLUID OR FUMES HAZARD Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed. Read MSDS s to know the specific hazards of the fluids you are using. Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines. PERSONAL PROTECTIVE EQUIPMENT You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to: Protective eyewear Clothing and respirator as recommended by the fluid and solvent manufacturer Gloves Hearing protection 004G 5

6 Pressure Relief Procedure (Models 490 and 49) Pressure Relief Procedure (Models 490 and 49) WARNING Fluid Manifold to Gun Relieve pressure from fluid manifold to gun whenever you stop spraying and before servicing gun or removing spray tip. In addition, relieve pressure from pump to fluid manifold at end of day and before cleaning, checking, or servicing pump, manifold, or fluid line accessories or transporting equipment. Read warnings, page 4.. Press.. Close all valves at mix manifold.. Hold a metal part of the gun firmly to a grounded metal pail. Trigger gun to relieve pressure. TI486a 6 004G

7 Pressure Relief Procedure (Models 490 and 49) Pump to Fluid Manifold. Open all fluid valves at mix manifold. Leave solvent valve (S) closed. 5. Hold a metal part of the gun firmly to a grounded metal pail. Trigger gun to relieve component A pressure. Indicator A will stay on for 5 sec after Pump A reaches Park position, then go off. TI486a S. Open all fluid outlet valves. TI644a 6. Indicator B comes on and Pump B pressurizes. 7. Hold a metal part of the gun firmly to a grounded metal pail. Trigger gun to relieve component B pressure. Indicator B will stay on for 5 sec after Pump B reaches Park position, then go off.. Turn function knob to pressure relief/park. TI486a If both pumps are not parked after min, Alarm 6 will sound. 4. Press. Indicator A comes on, and Pump A pressurizes. Pump air supply pressure must be sufficient to cause pumps to stroke to bottom-most position when function knob to is set to pressure relief/park. 004G 7

8 Pressure Relief Procedure (Model 5896) Pressure Relief Procedure (Model 5896) WARNING 5. Engage trigger lock. Relieve pressure from fluid manifold to gun whenever you stop spraying and before servicing gun or removing spray tip. In addition, relieve pressure from pump to fluid manifold at end of day and before cleaning, checking, or servicing pump, manifold, or fluid line accessories or transporting equipment. Read warnings, page 4. Fluid Manifold to Gun. Engage trigger lock.. Press.. Disengage trigger lock. 4. Hold a metal part of the gun firmly to a grounded metal pail. Trigger gun to relieve pressure G

9 Pressure Relief Procedure (Model 5896) Pump to Fluid Manifold. Close shutoff valves G A and G B.. Place waste container under sampling valves H A and H B. 5. Open sampling valve A slowly to bleed off pressure. Indicator A will stay on for 5 sec after Pump A reaches Park position, then go off. Pump air supply pressure must be sufficient to cause pumps to stroke to bottom-most position when function knob to is set to pressure relief/park. H B G B H A G A TI586a 6. Indicator B comes on and Pump B pressurizes.. Turn function knob to pressure relief/park. 7. Open sampling valve B slowly to bleed off pressure. Indicator B will stay on for 5 sec after Pump B reaches Park position, then go off. 4. Press. Indicator A comes on, and Pump A pressurizes. If both pumps are not parked after min, Alarm 6 will sound. 8. Close sampling valves A and B before restarting system. 004G 9

10 Maintenance Maintenance Preventive Maintenance Schedule Establish a preventive maintenance schedule, based on the pump s repair history. Dispense Valve See dispense valve manual Pump See applicable pump manual 067 or 066. Turbine Alternator Replace bearings every 000 hours. See page 0. Air Filters Drain and clean as necessary. See page 6. Pump Test See ProMix Easy Operation manual. If pumps fail test, see Icing, page 0. Wet Cup Check pump wet-cups daily. Keep filled with Graco Throat Seal Liquid (TSL), Part No Storage Before storing the pump, always flush it, see ProMix Easy Operation manual. Relieve the pressure, page 6. Icing If you experience icing at the pump air manifold: Reduce pump input air pressure below 80 psi (0.56 MPa, 5.6 bar), if required spray pressure allows. Reduce moisture in compressed air supply, or use heated air. If icing persists, see table below. Problem Solution Pump slows on both up and down stroke. Turn D port bleed screw 60 (/6 turn) counterclockwise, to bleed cfm air to melt ice. Pump slows on down stroke. Turn D port bleed screw 60 (/6 turn) counterclockwise, to bleed cfm air to melt ice. If icing continues, turn screw to 90 (/4 turn) to increase air flow to cfm. If necessary, increase air flow to cfm by turning screw to 70 (/4 turn). Do not exceed cfm (/4 turn maximum). U D Pump slows on up stroke. Turn U port bleed screw 90 (/4 turn) counterclockwise, to bleed cfm air to melt ice. If icing continues, turn screw to 0 (/ turn) to increase air flow to cfm. If necessary, increase air flow to cfm by turning screw to 80 (/ turn). Do not exceed cfm (/ turn maximum). TI594a 0 004G

11 Troubleshooting Troubleshooting WARNING If an alarm code displays, see page 4. Read warnings, page 4-5. Display not lit. No electric power. Problem Cause Solution Air valve not turned on. Turn on main air valve to system. Air supply pressure too low. Increase pressure to 60 psi (0.4 MPa, 4. bar) or greater. Air supply filters plugged. Clean filter bowls; replace filter elements. Page 6. Turbine air regulator set too low. Adjust to proper setting. Turbine alternator failure. Repair or replace turbine. Page 0. Power supply not connected to main board. Main board not connected to display board. Check power connections to main board. See Electrical Schematic, page 4. Check electrical connections between display and main board. See Electrical Schematic, page 4, and Main Control Board Schematic, page 5. Display board failure. Replace display board. Page 9. Pumps do not run. Air pressure to pumps too low. Increase pressure to 50 psi (0.5 MPa,.5 bar). Solenoid valve stuck. Actuate solenoid manually, if it does not operate, replace solenoid. Page. Dispense valve(s) not opening. Service or replace valve(s). See Pump test volume is not correct. Air pressure to pumps too low Increase pressure to 50 psi (0.5 MPa,.5 bar). Sensors not functioning properly. Check position of sensors. See ProMix Easy Operation manual, and applicable pump manual. Check board calibration and recalibrate if necessary. See ProMix Easy Operation manual. Replace sensors. See pump manual 067. Pump cavitating excessively. Check for air in siphon lines caused by loose fitting or use of agitator. Material too viscous. Use heater. 004G

12 Troubleshooting Problem Cause Solution Paint does not cure consistently. Ratio not set correctly. Check that correct ratio is set and set by volume. See ProMix Easy Operation manual. Material not mixing correctly. Test pump. Page 0. Make sure mixer is clean; flush as needed. See ProMix Easy Operation manual. Pump not operating correctly. Observe whether pumps are loading and checking correctly, if not, clean and repair pump. See displacement pump manual 066. Poor spray pattern. Fluid pressure too low. Increase pump pressure. Spray tip dirty or worn. Relieve pressure. Clean or replace tip. Follow gun manual instructions. Fluid A or B filters plugged. Clean filters on siphon tube in tank. Mixer or hoses partially plugged. Inspect parts for cured material. Clean or replace. System runs erratically. Air filter(s) clogged. Replace elements. Clean. Replace element(s). See page 6. Air supply hoses undersized. Replace hoses with appropriate size. Air compressor undersized. Use larger air compressor. Air supply pressure tank undersized. Use larger pressure tank. Air supply relief valve opens. Turbine air regulator set too high. Lower setting to -5 psi (7-4 kpa,.7-.4 bar). Turbine alternator makes high-pitched whining noise. Display shows or unit reboots unexpectedly. ProMix Easy does not start when start button is pressed. Turbine bearings worn. (Setting turbine air regulator too high, wears bearings.) Turbine is not supplying enough power to board. Replace bearings. Page 0. Increase turbine regulator setting to -5 psi (7-4 kpa,.7-.4 bar). Check turbine and electrical control exhaust air for restrictions. Replace turbine bearings. Page 0. Faulty start switch or wire harness. Check start switch and wiring harness continuity; switch is normally open circuit. See Electrical Schematic, page 4. Faulty stop switch or wiring harness. Check stop switch and wiring harness continuity; stop switch is normally closed circuit. See Electrical Schematic, page 4. Bad I/O port on display board. Replace board. Page 9. Bad I/O port on main board. Replace board. Page 8. Dispense valves leaking. Loose or worn packings. Tighten packing nut. If leak continues, replace packings. See G

13 Troubleshooting Problem Cause Solution Flow rate too low, or no flow. Inadequate air supply. Use larger CFM compressor. Air pressure to pumps too low. Increase pressure. Fluid A or B filters plugged. Clean filters on siphon tube in tank. Mixer or hoses partially plugged. Inspect parts for cured material. Clean or replace. Insufficient dispense valve travel. Increase travel. See Shutoff valves are not fully open. Ensure that shutoff valves are fully open and sampling valves are closed. Fluid regulator on remote mix manifold is set to high pressure position. Set regulator to lower pressure position. Pump stops after cycles. Knob is set to Run pump A or B independently. if spraying mate- Turn knob to spray rial. 004G

14 Alarms Alarms * Indicates error where audible alarm sounds once briefly. ** Indicates error where audible alarm sound pulses. Code Alarm Active Problem Cause Startup Errors 0 Sensor Error A* Always No signal from pump A sensor 0 Sensor Error B* Always No signal from pump B sensor 0 Communication Error* Always Loss of communication between main and display boards Operating Errors 04 not used 05 not used 06 Pump Error A** Spray 07 Pump Error B** Test Batch Pump does not stall after top change over Pump cavitating excessively 08 Sensor Code Error Always Sensor values reverted to default 09 not used 0 not used Sensor Reading Low A* Spray Pump stroke travels Sensor Reading Low B* Test beyond sensor range at Batch top change over Sensor Reading High A* Spray Pump stroke travels 4 Sensor Reading High B* Test beyond sensor range at Batch bottom change over Pot Life Error Spray Pot life timer timed out first, then Always Loose cable, failed sensor or cable, failed magnet assembly Loose cable, failed sensor or cable, failed magnet assembly Loose cable, failed board Intake valve leak Air in siphon lines caused by loose fitting or use of agitator Empty fluid supply Sensor value data corrupt; board needs replacement and /or recalibration Sensor or bracket loose Sensor magnet dirty Sensor or bracket loose Sensor magnet dirty Not enough material sprayed after last reset 4 004G

15 Alarms Code Alarm Active Problem Cause Operating Errors (continued) not used not used 4 not used 5 not used 6 Park Timeout Park Pumps not at bottom of stroke Testing Error Sampling valves closed, or gun not triggered. 5 Piston packing/ball A* Test Pump does not completely Piston packing or ball check failure 6 Piston packing/ball B* stall in up stroke 7 Inlet Ball A* Test Pump does not completely Intake valve ball check failure 8 Inlet Ball B* stall in downstroke 9 Dispense Valve A* Test Pump does not completely Throat packing or dispense valve failure stall in both up 0 Dispense Valve B* and down strokes 7 Pump Calibration Timeout A 8 Pump Calibration Timeout B Run A Run B Pump doesn t run through calibration. Sampling valves closed. 004G 5

16 Repair Repair Flush before repairing equipment, if possible. See Pro- Mix Easy Operation manual. WARNING Read warnings, page 4. Follow Pressure Relief Procedure (Models 490 and 49), page 6, if service time may exceed pot life time, before servicing fluid components, and before transporting equipment to a service area.. Close main air shutoff valve on air supply line and on unit.. Remove left side plate ().. Unlock filter bowl guard and remove. 4. Unscrew filter bowl. Replacing Air Filter Element There are air filters on the unit: the 5 micron air manifold filter (7) and 40 micron pump air filter (9). Replace element as needed. Order 5D909 5 micron filter and 5D micron filter. WARNING 5. Remove and replace element. 6. Screw filter bowl on securely. 7. Reassemble. Removing the bowl of a pressurized air filter could cause serious injury. Do not service air filter until air line is depressurized G

17 Repair User Interface Removal. Close main air shutoff valve on air supply line and on unit.. Remove side panels ().. Remove fasteners (45). Gently pull user interface () away from pneumatic control (0) Software Upgrades CAUTION To avoid damaging circuit board, wear a grounding strap.. Remove User Interface cover. See above.. Use a chip remover (D) to remove software chip (C). FIG.. C D FIG.. Install new chip (beveled corner down). FIG. TI6506a 4. To completely remove user interface (), disconnect ground wire (5), and wires (46 and 406) from main control board (0). See Electrical Schematic, page Reassemble. 5. Recalibrate main circuit board. See ProMix Easy Operation Manual. 004G 7

18 Repair Replacing Main Circuit Board CAUTION To avoid damaging circuit board, wear a grounding strap. 0. Remove User Interface cover. See page 7.. Disconnect all wire connectors from board (0). FIG.. 0. Remove four screws (0) and replace board (0). 4. Reassemble. Refer to Electrical Schematic, page Recalibrate system. See ProMix Easy Operation Manual. TI456a FIG G

19 Repair Replacing Display Circuit Board CAUTION To avoid damaging circuit board, wear a grounding strap.. Remove User Interface cover. See page 7.. Disconnect wires from display board (40). FIG. 4.. Remove two screws (4). 4. Loosen setscrew (49) from knob (405) and remove knob assembly. Remove jam nut (N). 5. Remove and replace display board (40). 6. Reassemble. Refer to Electrical Schematic, page N TI4755a TI4756a 46 FIG G 9

20 Repair Pneumatic Control Alternator Repair Turbine Alternator Repair Kit 688 is available to replace turbine bearings.. Remove User Interface cover. See page 7. Lightly lubricate turbine o-ring before installing turbine in housing. Connect alternator red wire to + side and black wire to side of main circuit board. Connect turbine to -pin connector on main circuit board. P 04 06r d 0 0 FIG. 6 FIG. 5 TI456a 04d 04a A. Disconnect power supply wires (P). FIG. 5.. Disconnect two air lines (0) from alternator (04). FIG Remove top nut (05) and loosen bottom nut. Slide alternator up and off bottom nut. 04e 5. Remove four screws (04d) to separate alternator housings. FIG Disconnect turbine (04e) from board (A). Follow instructions in turbine kit manual 0804 to remove and repair turbine. FIG. 7 Torque to 0 in-lbs ( N m) 7. Replace gasket (04a) if damaged. Place between housings before securing with screws (04d). 8. Reassemble. Refer to Electrical Schematic, page G

21 Repair Replacing Solenoids Follow this procedure to replace a single solenoid.. Remove User Interface cover. See page 7.. Disconnect two solenoid wires (V) from main board. FIG. 8.. Disconnect dispense valve pilot lines (A, A, B, B). FIG Remove two screws (S). 5. Remove and replace solenoid (06b). From left to right, solenoid functions are as follows: Component A Component B 6. Reassemble. Solenoid wires are polarized (red +, black ). Refer to Electrical Schematic, page 4. Replacing Alternator Regulator. Remove User Interface cover. See page 7.. Remove two screws (09) from the back of the control box.. Disconnect supply and exhaust air lines (0). FIG. 5, page Disconnect solenoid wires position Phoenix connector (06r) from main board. 5. Remove solenoid module (06) with regulator (06e). FIG Unscrew and replace regulator (06e). 7. Reassemble. Refer to Electrical Schematic, page 4. Make sure gaskets (06j, 06k) are in place when reinstalling solenoid module. 8. Set regulator to 4 psi (60 kpa,.6 bar). Replacing Alarm. Remove User Interface cover. See page 7.. Disconnect alarm wires from main board.. Unscrew alarm () and replace. FIG. 5, page Reassemble. Refer to Electrical Schematic, page 4. Dispense Valve Pilot Lines A (off), clear tube A (on), black tube B (off), green tube B (on), red tube Set regulator pressure to 4 psi (60 kpa, 6 bar). Safety relief valve (06t) is required on all IS units. 0 06e A B B V A 06k 06j B 06t FIG. 8 TI6605a A A B S 06b TI4558a 004G

22 Repair Dispense Valve Assembly/Mix Manifold Assembly See the Parts drawing for your model. WARNING Pump Assembly See the Parts drawing for your model. WARNING Read warnings, page 4. Read warnings, page 4.. Follow Pressure Relief Procedure (Models 490 and 49), page 6, or Pressure Relief Procedure (Model 5896), page 8.. Label all air and fluid lines, and disconnect from fittings on manifold assembly.. Remove fasteners. 4. Remove mix manifold (). 5. To repair mix manifold, see manual To repair dispense valves, see manual Reassemble.. Follow Pressure Relief Procedure (Models 490 and 49), page 6, or Pressure Relief Procedure (Model 5896), page 8.. Remove side plates ().. Remove wire harnesses from sensor and solenoids. Refer to Electrical Schematic, page Disconnect fluid inlet and outlet lines from pump lower. Disconnect air supply from pump. 5. Label all tubing and disconnect from fittings on pump assembly. 6. Remove mounting hardware and slide pump out of frame. 7. Repair as instructed in pump manuals 067, 067, or Reassemble. 004G

23 Repair Remote Mix Manifold and Fluid Regulator (490 and 49 only) Repair Kit 440 is available. Order the kit separately. Parts included in the kit are marked with a symbol, for example (90 ). WARNING Read warnings, page 4.. Follow Pressure Relief Procedure (Models 490 and 49), page 6.. Remove the four short screws (90) and one long screw (9) holding the fluid regulator housing (906) to the regulator mounting plate (90). Remove the fluid regulator housing, spring (9), and retainer (90). See FIG. 9.. Remove the remaining long screws (9) holding the regulator mounting plate (90), mix manifold housing (90), and base (905) together. Separate the three parts. 4. Remove the two gaskets (90, 904) from the mix manifold housing (90). 5. Hold the nut (99) with a wrench and unscrew the valve stem (9). Disassemble the acetal washer (98), diaphragm (97), large gasket (96), small gasket (95), and metal washer (94). 6. Clean all parts and replace any damaged parts. 7. Place the gaskets (90, 904 ) in the grooves of the mix manifold housing (90). Align the indexing pin on the base (905) with the small hole in the housing (90), and assemble the two parts. 8. Reassemble the diaphragm assembly in the reverse order, following the notes in FIG. 9. Be sure the AIR SIDE of the diaphragm (97 ) faces up toward the nut (99 ). 9. Reassemble the remaining parts in the reverse order, following the notes in FIG IMPORTANT: Apply thread adhesive. IMPORTANT: Torque to 6-0 in-lb (0.7-. N m). Lubricate. 4 Torque to in-lb ( N m) Google.url AIR SIDE must face up, toward nut (99) TI6509a FIG. 9. Mix Manifold and Fluid Regulator (490 and 49 only) 004G

24 Electrical Schematic Electrical Schematic MAIN CONTROL BOARD 4849 J6 JUMPER (5V) 0 J5 0 J J J J VDC RED COM BLACK VDC RED RED BLACK RED BLACK - SOLENOID VALVE A - SOLENOID VALVE B FLUID VALVES BLACK SHIELD RED BLACK - CABLE # 4 OPT. SOLENOID, RECIRC RED BLACK BLACK VDC SHIELD WHITE_W/GRN GREEN WHITE_W/ORANGE ORANGE WHITE_W/BLUE BLUE CABLE # 5D607 (X) WHITE_W/GRN GREEN WHITE_W/ORANGE ORANGE WHITE_W/BLUE BLUE SENSOR 4678 "A" SENSOR 4678 "B" SHIELD 6 RED WHITE BLACK CABLE # 5A854 (MAIN TO DISPLAY) J SIGNAL A WHITE COM METER A BLACK VDC 468 RED SIGNAL B METER B WHITE ORANGE AIR FLOW SWITCH SOLENOID BOARD 5C75 P4 P S G ALARM ASSY 5A849 DISPLAY BOARD POWER SUPPLY ASSEMBLY 45 POWER SUPPLY POWER BARRIER SUPPLY BOARD 9790 RED BLACK RED BLACK RED BLACK RED BLACK - MOTOR B DOWN - MOTOR B UP - MOTOR A DOWN - MOTOR A UP 5D794 ALARM + ALARM COM RED WHITE BLACK COMM PORT ASSY 5A850 J RED WHITE BROWN GREEN BLACK J BLACK RED GREEN FRONT PANEL COM PORT RS CONNECTOR TX RX GND START A B LIGHT + - AIR INPUT GND KEY SWITCH MOM. STOP COM PORT PIN LOCATIONS FRONT SIDE VIEW (OPPOSITE SIDE OF SOLDER CUPS) START/STOP SWITCH ASSY 5A85 GND KEY SWITCH ASSY 5A G

25 Main Control Board Schematic Main Control Board Schematic J5 J6 F U4 MAIN CONTROL BOARD J4 J J8 J 004G 5

26 Parts Parts Part No. 490 Clear Coat System, Series A (shown) Part No. 49 Primer System, Series A See page TI6505a See page 8. 7 TI685a 6 004G

27 Parts Part No. 490 Clear Coat System, Series A Part No. 49 Primer System, Series A Ref. No. Part No. Description Qty PROPORTIONER; see page OUTLET VALVE ASSEMBLY; clear coat system only; see page DISPENSE VALVE ASSEMBLY; clear coat system; see page DISPENSE VALVE ASSEMBLY; primer system; see page PUMP INLET VALVE ASSEMBLY; clear coat system only; see page 45 05* 5F685 TRAY, feed tank TANK, feed; clear coat system 498 TANK, feed; primer system UNION, adapter, 90 ; /4 npt(f) x /4 npsm(f); clear coat system UNION, adapter, 90 ; /4 npt(f) x /4 npsm(f); primer system BUSHING, pipe; /4 npt(m) x /8 npt(f); clear coat system BUSHING, pipe; /4 npt(m) x /8 npt(f); primer system 09* 5E04 BASE 0 5D986 PLATE, rear * 6698 VALVE, ball; /4 npt(m) x /4 4 npt(f) * 09 CONNECTOR, pipe; /4 npt (fbe) * 049 ELBOW, 90 ; /4 npt (mbe) 5* 5E04 SUPPORT, bracket 6* 66 CASTER WASHER, lock; /8 8 8* 096 SCREW, cap; 5/6-8 x /4 in. 4 (9 mm) 9* 0996 NUT, hex, flanged; 5/ * 695 SCREW, cap; /8-6 x in. (76 mm) * 5F78 BRACKET, tank * 599 NIPPLE; / npt x /8 npt * 48 HOSE, siphon, solvent pump TUBE, dryer; package of MUFFLER; clear coat system 474 MUFFLER; primer system KIT, air regulator, gun; see HOSES/MANIFOLD; clear coat system; see page HOSES/MIX MANIFOLD; primer system; see page HOSE, fluid; /8 npsm (fbe); nylon; /8 in. (0 mm) ID; 6 in. (95 mm); clear coat system Ref. No. Part No. Description Qty HOSE, fluid; /8 npsm (fbe); nylon; /8 in. (0 mm) ID; 6 in. (95 mm); primer system 9* 0959 CROSS, pipe; /4 npt(f) 0* ELBOW, street; /4 npt(m) x /4 npsm(f) * 645 NIPPLE; /4 npt x /4 npsm * 6598 NIPPLE, reducing; /8 npt x /4 npt * D9 PUMP, double diaphragm, solvent; see NIPPLE; /8 npt x /8 npsm 4 5* 480 HOSE, fluid; /4 npsm (fbe); /4 in. (6 mm) ID; nylon; ft (0.9 m) 6* 94 SCREW, cap; /8-6 x in. (5 mm) 7* 958 NUT, hex, flange hd; / * 5F676 LEG, stand 9* C94 CONNECTOR; /4 npt(m) x /8 in. (0 mm) OD tube 40 5F709 STRAP, feed tank (not shown) 4 99 SCREW, self-tapping HOSE, fluid; /4 npsm (fbe); PTFE; /4 in. (6 mm) ID; 8 in. (457 mm) CONNECTOR, tee; /8 in. (0 mm) OD tube SCREW, cap, hex flanged hd; /4-0 x /4 in. (9 mm) NUT, hex, flange hd; / SCREW, cap, hex hd; /4-0 x in. (5 mm) 4 57 buy locally TUBE; nylon; /8 in. (0 mm) OD; 4.5 see pages 6 and 40 ft ELBOW; /4 npt(m) x /8 in. (0 mm) OD tube FITTING, bulkhead 60 9 FITTING, air; /4 npt(m) x /8 in. (0 mm) OD tube 6 C8 ELBOW; / npt(m) x /8 in. (0 mm) OD tube fitting TUBE; nylon; /4 in. (6 mm) ID * These parts are shown on page 8. These parts are shown on page G 7

28 Parts Part No. 490 Clear Coat System, Series A, Detail Views Part No. 49 Primer System, Series A, Detail Views Solvent Pump Detail TI6504a Base and Stand Detail TI650a G

29 004G 9 Parts

30 Parts Part No Primer System, Series A (shown) a TI58a See Detail A, page a c See Detail B, page b 44b See Detail D, page TI58a See Detail C, page G

31 Parts Part No Primer System, Series A Ref. No. Part No. Description Qty PROPORTIONER; see page MIX MANIFOLD; see manual a 4E5 TANK, feed, component A; 5 gal. (57 l); with agitator and bottom outlet kit; see manual b 4E56 TANK, feed, component B; 5 gal. (9 l); with bottom outlet kit; see manual UNION, adapter, 90 ; /4 npt(f) x /4 npsm(f); clear coat system BUSHING, pipe; /4 npt(m) x /8 4 npt(f); clear coat system 09* 5E04 BASE 0 5D986 PLATE, rear * 6698 VALVE, ball; /4 npt(m) x /4 npt(f) * 049 ELBOW, 90 ; /4 npt (mbe) 5* 5E04 SUPPORT, bracket 6* 66 CASTER 4 8* 096 SCREW, cap; 5/6-8 x /4 in. (9 6 mm) 9* 0996 NUT, hex, flanged; 5/6-8 6 * 599 NIPPLE; / npt x /8 npt * 48 HOSE, siphon, solvent pump KIT, air regulator, gun; see HOSE BUNDLE; /8 in. (0 mm) ID air hose, /4 npsm (fbe); /6 in. (5 mm) ID fluid hose, /8 npsm (fbe); 6 ft (8 m) HOSE, fluid; /8 npsm (fbe); nylon; /8 in. (0 mm) ID; 6 ft (.8 m) 0* 858 ELBOW; /8 npt x /4 npt (mbe) * D PUMP, double diaphragm, solvent; see NIPPLE; /8 npt x /8 npsm 4 5* 480 HOSE, fluid; /4 npsm (fbe); /4 in. (6 mm) ID; nylon; ft (0.9 m) Ref. No. Part No. Description Qty. 6* 94 SCREW, cap; /8-6 x in. (5 6 mm) 7* 958 NUT, hex, flange hd; / * 5E09 LEG, stand 9* 58 CONNECTOR; /4 npt(f) x /8 in. (0 mm) OD tube 4 99 SCREW, self-tapping HOSE, fluid; /4 npsm (fbe); PTFE; /4 in. (6 mm) ID; 8 in. (457 mm) AUTO FLUSH KIT; see manual 0800; includes items 44a-44c 44a 5E9 CONTROL BOX, auto flush 44b 87 VALVE, flush; see manual c UNION, swivel; /4 npt(f) x /4 npsm(f) CONNECTOR, tee; /8 in. (0 mm) OD tube NUT, hex, flange hd; / SCREW, cap, hex hd; /4-0 x 4 in. (5 mm) 55* 777 TEE; /8 npt(m) x /8 npt(f) x /8 npt(f) 56* 645 NIPPLE; /4 npt x /4 npsm TUBE; nylon; /8 in. (0 mm) OD;.5 see pages 8 and 40 ft TUBE; nylon; /4 in. (6 mm) ID 6* 409 ELBOW; /4 npt(m) x /4 in. (6 mm) OD tube TEE; 5/ in. (4 mm) OD tube SCREW, cap, button hd; /4-0 x /8 in. (0 mm) 66 C908 WASHER, lock; /4 * These parts are shown on page. These parts are shown on pages 0 and. These parts are shown on page G

32 Parts Ref. No. Part No. Description Qty. 67* GAUGE, fluid pressure 68* 007 ELBOW; /8 npt (mbe) 69* 559 NIPPLE, reducing; /4 npt x /8 npt 70* 4475 REGULATOR, fluid pressure; see manual 07 7* 6459 ELBOW, street; /8 npt(m) x /4 npt(f) VALVE, shuttle; /8 npt(f) 7 46 CONNECTOR; /8 npt(m) x 5/ in. (4 mm) OD tube ELBOW; /8 npt(m) x 5/ in. (4 mm) OD tube DRYER, air; / npt(f) 76* 579 ADAPTER; /4 npt(m) x / npt(m) 77* TEE, pipe; /4 npt(f) 78* 8758 BUSHING; /8 npt(m) x /4 npt(f) 79* 44 ELBOW; /4 npt(mbe) 80* 047 REGULATOR, air; with gauge; see manual * ELBOW, street; /4 npt (mxf) BUSHING, pipe; / npt(m) x /4 npt(f) ELBOW; /4 npt(m) x /4 in. (6 mm) OD tube Ref. No. Part No. Description Qty CONNECTOR; /4 npt(f) x /4 in. (6 mm) OD tube 85* 45 ELBOW; /8 npt(m) x /4 in. (6 mm) OD tube 86* 458 FITTING, Y-adapter; /4 in. (6 mm) OD tube 87* 5769 ELBOW, street; /4 npt(m) x /8 npt(f) GUN, airspray, AirPro; see manual TUBE, extension, gun fluid inlet TUBE; nylon; 5/ in. (4 mm) OD; 55 ft clear; see pages 8 and 40 9 buy locally TUBE; nylon; /4 in. (6 mm) OD; natural; see pages 8 and 40 5 ft 9 buy TUBE; nylon; 5/ in. (4 mm) OD; 50 ft locally red; see pages 8 and 40 9 buy locally TUBE; nylon; 5/ in. (4 mm) OD; 5 ft green; see pages 8 and 40 * These parts are shown on page. These parts are shown on pages 0 and. These parts are shown on page G

33 Parts Part No Primer System, Series A, Detail Views Detail A Air Inlet Manifold Assembly Detail B Fluid Regulator Assembly TI584a TI50a Detail C Base and Stand Assembly TI58a Detail D Solvent Pump Assembly TI587a 004G

34 Parts Part No. 490 Proportioner, Series A 9 0, TI6506a (Ref) Ref. nos. 4, 45, 48, 58, 59, 60, and 6 are shown here but are part of system parts lists on pages 7 or. Ref. nos. 0, 65, and 66 are used on Model 5896 System only. TI6507b 4 004G

35 Parts Part No. 490 Proportioner, Series A Ref. No. Part No. Description Qty. 5D77 FRAME, wall mount 870 CONTROL, air; see page ELBOW, pipe; /8 npt (mbe) ELBOW, street, 45 ; /8 npt (mxf) UNION, adapter; /8 npsm(f) x /8 npt(m) 7 4K977 FILTER, air; 5 micron 8 46 ELBOW; /8 npt(m) x /8 in. (0 mm) OD tube fitting 9 5D795 FILTER, air; 40 micron PNEUMATIC CONTROL see page USER INTERFACE; see page PUMP, UltraMix, cst; see D87 BRACKET, support, fluid manifold 5 C8 ELBOW; / npt(m) x /8 in. (0 mm) OD tube fitting 6 C908 WASHER, lock; / SCREW, cap, button hd; 5 /4-0 x /8 in. (0 mm) SCREW, machine, phillips; 4 8- x 7/6 in. ( mm) 5D767 PLATE, side 99 SCREW, self-tapping 80 SCREW, hex hd, flanged; 8 /8-6 x 5/8 in. (6 mm) HOSE, air; nitrile; / in. ( mm) ID; / npt (mbe); 8 in. (457 mm); see also pages 6 and 40 5 C904 ELBOW, swivel; / npt(m) x / npsm(f) 6 5D607 CABLE, sensor; see Electrical Schematic, page 4 7 5D794 HARNESS, connector; see Electrical Schematic, page LABEL, warning 0765 GROMMET 0045 COUPLING; /8 npt (fbe) 567 CONNECTOR; /8 npt(m) x /4 in. (6 mm) OD tube GROUND WIRE 8 79 PLUG, tube fitting; 5/ in. (4 mm) OD tube NUT, keps, hex hd; SCREW, cap, button hd; 4 0- x /8 in. (0 mm) SCREW, machine; /4-0 x -/ in. (8 mm) NUT, hex, flange hd; / FITTING, Y-adapter; /4 in. (6 mm) OD tube ADAPTER; /8 in (0 mm) tube x /4 in. (6 mm) tube Ref. No. Part No. Description Qty TUBE; nylon; 5/ in. (4 mm) OD; ft clear; see pages 6 and buy locally TUBE; nylon; 5/ in. (4 mm) OD; ft black; see pages 6 and buy locally TUBE; nylon; 5/ in. (4 mm) OD; ft red; see pages 6 and buy locally TUBE; nylon; 5/ in. (4 mm) OD; green; see pages 6 and 40 ft 60 buy locally TUBE; nylon; /8 in. (0 mm) OD; 6.7 see pages 6 and 40 ft NIPPLE; /4 npsm x /4 npt 70 buy locally TUBE; nylon; /4 in. (6 mm) OD; see pages 6 and ft BUSHING, strain relief Replacement Danger and Warning labels, tags, and cards are available at no cost. 004G 5

36 Parts Tube and Hose Connections, All Models See FIG. 0. Find the keys on the drawing to ensure proper connections. Key Description Ref. No. (see pages 7,,, and 5) Length, in. (mm) A Dispense Valve A OFF 56 4 (60) A Dispense Valve A ON 57 4 (60) B Dispense Valve B OFF 59 4 (60) B Dispense Valve B ON 58 4 (60) C Air to Pneumatic Control (0) 60 8 (0) D Air Filter (9) Drain Tube 70 4 (60) D Air Filter (7) Drain Tube 70 8 (457) G Gun Air Regulator (74) Input 60 (787) G Gun Air Regulator (74) Output 60 0 (76) L Fluid Line, Pump A to Dispense Valve A 4 8 (457) L Fluid Line, Pump B to Dispense Valve B 4 8 (457) M Air Filter (9) to Air Control () 4 8 (457) P Pump A Input Air 60 7 (4) P Pump B Input Air 60 (5) S Pump A Solenoid Inputs ( tubes) 70 (5) S Pump B Solenoid Inputs ( tubes) 70 (5) T Solvent Pump Air Supply (7) 6 004G

37 Parts P P G G M C G T D M D T P P S S B C D A D B Side L B L A A Side L B B A A L TI6508a FIG. 0. Tube and Hose Connections, All Models 004G 7

38 Parts Tube and Hose Connections, Model 5896 Only See FIG.. Find the keys on the drawing to ensure proper connections. Connections shown apply only to Model For connections which apply to all models, see FIG. 0. Ref. No. (see Length, Key Description pages and ) ft. (m) This Key applies to Model 5896 only CB Solenoid to Control Box 90 0 (9.) DB Air Supply to Air Dryer 9 8 (.4) FA Flush Valve A OFF 9 5 (7.6) FA Flush Valve A ON 9 5 (7.6) FA4 Control Box to Shuttle Valve (0.5) FB Flush Valve B OFF 9 5 (7.6) FB Flush Valve B ON 9 5 (7.6) FB4 Control Box to Shuttle Valve (0.5) GA Gun Air Supply 7 6 (7.9) GF Gun Fluid Supply 7 6 (7.9) P Tank A to Pump A 8 6 (.8) P4 Tank B to Pump B 8 6 (.8) R Air Supply to Fluid Regulator 9 5 (.5) R Air Signal from Control Box to Fluid Regulator 90 5 (7.6) SA Solvent Pump to Flush Valve A 5 5 (.5) SB Solvent Pump to Flush Valve B 5 5 (.5) TA Tank A Air Supply 9 5 (.5) TB Air Dryer to Tank B 9 5 (.5) 8 004G

39 Parts B Side A Side SA R SB FA4 FB4 Front View FB FA4 R FB4 TA DB FB FA FA FA FA CB Bottom View FB FB SB SA GA R R GF CB TA DB TB TB B Side A Side Tank A Tank B P4 P FIG.. Tube and Hose Connections, Model 5896 only 004G 9

40 Parts Pneumatic Schematic MOTOR UP MOTOR B DOWN B PUMP UP, VDC PUMP B B DOWN, VDC MOTOR DOWN A MOTOR A PUMP UP, VDC UP PUMP A A DOWN, VDC AIR EXHAUST, / TUBE X 4" LONG MANIFOLD GAUGE AIR REGULATOR AIR SUPPLY SOLENOID VDC POSITION A METERING VALVE VDC 0 PSI RELIEF VALVE GAUGE /8 AIR FILTER AUTO DRAIN 5 MICRON TO MANIFOLD /8 TUBE SOLENOID POSITION POSITION (OPEN FOR OPT. CIRCULATION ACCESSORY SOLENOID) POSITION 4 (OPEN WITH BLANK PLATE) B METERING VALVE /4 AIR FILTER AUTO DRAIN 0 MICRON /4" BALL VALVE BLEED TYPE AIR REGULATOR PSI RELIEF VALVE 6 PSI FACTORY SET TURBINE / POWER SUPPLY G

41 Parts 870 Pump Air Control Ref. No. Part No. Description Qty. 0 5D84 MANIFOLD, air REGULATOR, air; / npt(f) inlet and outlet; see manual CAP, pipe, / in. ( mm) GAUGE, air pressure PLUG; /4 npt VALVE, ball, bleed-type; / npt(fbe) Ref. No. Part No. Description Qty VALVE, safety relief; 0 psi (0.8 MPa, 8 bar) STANDOFF BUSHING, pipe; / npt(m) x /8 npt(f) 0 C904 ELBOW, swivel; / npt(m) x / npsm(f) TI460a 004G 4

42 Parts 4870 Intrinsically Safe Pneumatic Control 07 0 Alternator Module (04) Detail 0, 4 04d 04a e b 04c 08 TI456a Solenoid Module (06) Detail 06g 06f 06h 06f 06d 06a 06e 06n 06m 06s 06p 06t 06f 06n 06k 06j 06n 06c 06b 06u TI4558a 4 004G

43 Parts 4870 Intrinsically Safe Pneumatic Control, continued Ref. No. Part No. Description Qty CIRCUIT BOARD, main SCREW, machine, phillips; 8 8- x 5/6 in. (8 mm) MODULE, alternator; includes items 04a-04e 04a 954 GASKET; LDPE foam 04b 5A85 WIRE HARNESS 04c 5 ELBOW; /8 npt(m) x /8 in. (0 mm) tube fitting 04d 480 SCREW; M5 x e 9 TURBINE ALTERNATOR NUT, lock, w/nylon insert; MODULE, solenoid, IS; includes items 06a-06u 06a 5A8 MANIFOLD 06b 756 VALVE, VDC, IS 06c 46 FITTING; /8 npt x 5/ in. (4 mm) tube 6 06d 5697 NIPPLE; /4 npt 06e 54 AIR REGULATOR; /4 npt 06f 584 ELBOW; /4 npt x /8 in. (0 mm) tube fitting 06g 6070 ELBOW, street; /8 npt(m x f) 06h 0890 GAUGE 06j 5A798 GASKET, neoprene 06k 5A799 GASKET, neoprene 06m 007 ELBOW; /8 npt (mbe) 06n PLUG, pipe; /8 ptf 6 06p MUFFLER 06q 5 WIRE FERRULE, orange (not shown) 8 06r 769 CONNECTOR, position 06s 5078 ADAPTER, /4 x /8 npt 06t 7480 SAFETY RELIEF VALVE, 6 psi (79 kpa,.8 bar) 06u 558 PLATE 07 5A800 GASKET; neoprene BUSHING, strain relief SCREW, machine; M5 x 0.8; 0 mm TUBE, poly-flo ft 505 NUT, keps; CLAMP, ground 5A849 HARNESS, wire, alarm CONNECTOR, plug, 8 position 5 5B090 WIRE, grounding, door 7 07 WASHER, lock, external tooth; M WIRE, copper ft 0 8 TERMINAL, lug, lockwasher 89 SPACER 4 HARNESS, connector CIRCUIT BOARD 4 5 FERRULE, wire 004G 4

44 Parts 460 User Interface Ref. No. Part No. Description Qty. 40 5B06 DISPLAY 40 5A85 HARNESS, wire 404 5A80 GASKET; neoprene 405 5D85 KNOB, control 406 5A850 HARNESS, wire 407 5A85 HARNESS, wire, switch 408 5D796 LABEL, control, upper 409 5D798 LABEL, control, lower CIRCUIT BOARD, display; includes jam nut (N) Ref. No. Part No. Description Qty SCREW, machine; 4-40 x /8 in. (0 mm) 4 5A856 PANEL, display 4 C7076 NUT, lock, w/nylon insert; MOUNT, tie wrap 46 5A854 HARNESS, wire, display WASHER; 0.0 in SCREW, set; socket hd; 0-4 x 5/6 (8 mm) N TI4755a TI4756a G

45 Parts 499 Pump Inlet Valve Assembly, for 490 Clear Coat System only Ref. No. Part No. Description Qty UNION, swivel, 90 ; /4 npt(f) x /4 npsm(f) BUSHING, pipe; /4 npt(m) x /8 npt(f) TEE; /8 npt(m) x /8 npt(f) ELBOW, 90 ; /8 npt (mbe) VALVE, ball; /8 npt (fbe) NIPPLE; /8 npt x /8 npsm TI657a 498 Pump Outlet Valve Assembly, for 490 Clear Coat System only TI655a Ref. No. Part No. Description Qty UNION, swivel, straight; /4 npt(m) x /4 npt(f) CROSS, pipe; /4 npt(f) NIPPLE; /4 npt CONNECTOR, pipe; /4 npt (fbe) VALVE, ball; /4 npt (fbe) NIPPLE; /4 npt x /4 npsm ELBOW, 90 ; /4 npt (mbe) ELBOW, street, 90 ; /4 npt (mxf) 004G 45

46 Parts 496 Dispense Valve Assembly, for 490 Clear Coat System TI659a Ref. No. Part No. Description Qty VALVE, dispense; see D6 HOUSING, ratio VALVE, pressure relief PLUG, cap; /4 npt ELBOW, 90 ; /4 npt (fbe) NIPPLE, long; /4 npt VALVE, ball; /4 npt (fbe) WASHER, lock NIPPLE; /4 npt NIPPLE; /4 npt x /4 npsm ELBOW, street, 90 ; /4 npt (mxf) U-BOLT, with nuts; / F8 BRACKET, dispense FITTING, barbed PLUG, pipe, headless VALVE, check G

47 Parts 4987 Dispense Valve Assembly, for 49 Primer System , 707, TI655a Ref. No. Part No. Description Qty VALVE, dispense; see D6 HOUSING, ratio VALVE, pressure relief PLUG, cap; /4 npt VALVE, ball; /4 npt (fbe) WASHER, lock NIPPLE; /4 npt NIPPLE; /4 npt x /4 npsm ELBOW, street, 90 ; /4 npt (mxf) U-BOLT, with nuts; / F8 BRACKET, dispense FITTING, barbed VALVE, check 004G 47

48 Parts 49 Hose Bundle and Remote Mix Manifold, for 490 Clear Coat System 806e d a b a 806c TI686a Ref. No. Part No. Description Qty ELBOW, street, 90 ; /4 npt (mxf) TEE; /4 npt(f) VALVE, ball; /4 npt(m) x /4 npt(f) F74 FITTING, adapter; /4 npt(m) x /4 6 npt(f) MANIFOLD, mix, remote; see page HOSE SET; includes items 806a-806e, and protective cover 806a HOSE, component A; 5 ft (0.7 m) 806b HOSE, component B; 5 ft (0.7 m) 806c HOSE, solvent; 5 ft (0.7 m) 806d HOSE, air; 4 ft (.5 m) 806e 4988 HOSE, whip; with static mixer; 5 ft (.5 m) CHECK VALVE; /4 npt (mbe) G

49 Parts 4986 Hose Bundle and Remote Mix Manifold, for 49 Primer System 806e d a 806b 806c TI6409a Ref. No. Part No. Description Qty VALVE, ball; /4 npt(m) x /4 npt(f) 804 5F74 FITTING, adapter; /4 npt(m) x /4 npt(f) MANIFOLD, mix, remote; see page HOSE SET; includes items 806a-806e, and protective cover 806a HOSE, component A; 5 ft (0.7 m) 806b HOSE, component B; 5 ft (0.7 m) 806c HOSE, solvent; 5 ft (0.7 m) 806d HOSE, air; 4 ft (.5 m) 806e 4988 HOSE, whip; with static mixer; 5 ft (.5 m) PLUG, cap; /4 npt(f) 004G 49

50 Parts 440 Remote Mix Manifold (490 and 49 only) TI6509a Ref. No. Part No. Description Qty PLATE, mounting, regulator GASKET, mix manifold, outlet HOUSING, mix manifold GASKET, mix manifold, inlet BASE, mix manifold HOUSING, regulator NUT, cap SCREW, set, socket hd; 0- x /4 in. (9 mm) NUT, hex; RETAINER, spring SPRING, compression STEM, valve SEAT, valve WASHER, backup GASKET GASKET, non-metallic DIAPHRAGM, regulator WASHER, acetal NUT, hex; SCREW, cap, socket hd; 8- x /8 4 in. (0 mm) SCREW, cap, socket hd; 8- x -/4 in. ( mm) 5 Ref. No. Part No. Description Qty PIN, spring NIPPLE; /4 npt x /4 npsm CHECK VALVE; includes item GASKET; acetal PACKING, o-ring, check valve 4 These parts are included in Repair Kit 440, which may be purchased separately G

51 Technical Data Technical Data Mix ratio range :-0: (in 0. increments) Ratio tolerance range up to +/- % Flow rates Minimum qt/min (0.0 lpm)* Maximum gpm (.8 lpm) Pump size cc/cycle Pump cycle length (one cycle = one upstroke and one downstroke) in. (5 mm)/cycle Fluid viscosity range cps (heavier viscosities can be mixed with use of optional heaters, heated hoses, and hardware) Fluid filtration mesh standard Maximum fluid working pressure psi (.7 MPa, 7 bar) Air supply pressure range psi ( kpa, bar) Maximum air consumption at 00 psi (0.7 MPa, 7 bar).. 0 scfm (0.56 m /min) Ambient temperature range Operating F (0-40 C) Storage F ( -7 C) Environmental Conditions Rating Altitude up to 4000 meters Maximum relative humidity to 99% up to 40 C Pollution degree () Sound pressure** dba Sound power** dba Wetted parts Pumps See 066 Dispense Valves See 0655 PC Communications RS- * Minimum flow rate is dependent on the material being sprayed and mixing capability. Test your material for specific flow rate. ** Tested in accordance with ISO 744 at 00 psi (0.7 MPa, 7 bar) inlet air pressure. 004G 5

52 Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco s sole obligation and buyer s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two () years of the date of sale. GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise. FOR GRACO CANADA CUSTOMERS The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées. Graco Information For the latest information about Graco products, visit TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. Phone: or Toll Free: , Fax: All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English. MM 004 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES P.O. BOX 44 MINNEAPOLIS MN USA Copyright 005, Graco Inc. All Graco manufacturing locations are registered to ISO Revised /0

Pro Shot Grease Dispense Valve

Pro Shot Grease Dispense Valve Instructions Parts List Pro Shot Grease Dispense Valve 309032J For high pressure grease dispense. 8000 psi (55 MPa, 552 bar) Maximum Working Pressure Model No. 242055, Series B, 1/4 npt Fluid Inlet Model

More information

Pressurized oil drain for collection of used lubricants and anti-freeze.

Pressurized oil drain for collection of used lubricants and anti-freeze. Instructions - Parts List 24-Gallon (90-Liter) Oil Ace 30864B Pressurized oil drain for collection of used lubricants and anti-freeze. Model 9577 Series A 8 psi (55 kpa,5 bar) Maximum Working Pressure

More information

Fuel Meter. Instructions - Parts List. Contents B. Model , measures in gallons Model , measures in liters. For metering fuels.

Fuel Meter. Instructions - Parts List. Contents B. Model , measures in gallons Model , measures in liters. For metering fuels. Instructions - Parts List Fuel Meter 311309B For metering fuels. 80 psi (0.55 MPa, 5.5 bar) Maximum Working Pressure Model 260405, measures in gallons Model 260414, measures in liters Important Safety

More information

Old Proportioning Pumps

Old Proportioning Pumps Repair - Parts Old Proportioning Pumps 311391F For proportioning pumps on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in

More information

UltraMix Pumps. Repair - Parts A

UltraMix Pumps. Repair - Parts A Repair - Parts UltraMix Pumps 310671A Read warnings and instructions. See page 3 for model information, including maximum working pressure and approvals. TI4598a Graco Inc. P.O. Box 1441 Minneapolis, MN

More information

390 Airless Sprayer. Parts J EN. Models: , , , , , ,262024, , , , Hi-Boy.

390 Airless Sprayer. Parts J EN. Models: , , , , , ,262024, , , , Hi-Boy. Parts 390 Airless Sprayer 37J EN Models: 253958, 254998, 2209, 25498, 25499, 2539,22024, 2539, 25392, 2548, 82084 Important Safety Instructions Read all warnings and instructions in the Operation and Repair

More information

PROVEN QUALITY, LEADING TECHNOLOGY

PROVEN QUALITY, LEADING TECHNOLOGY Instructions Parts List Fluid Outlet Filter 303Z For filtering of finishing materials. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual. Save these

More information

Repair - Parts H. Plural Component Proportioner. Non-heated Units. Heated Units

Repair - Parts H. Plural Component Proportioner. Non-heated Units. Heated Units Repair - Parts 30666H Plural Component Proportioner Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Non-heated Units See page 3 for model information,

More information

Color Change Valve. Instructions Parts List K

Color Change Valve. Instructions Parts List K Instructions List Color Change Valve 0K For color changing or distribution of industrial paints and coatings or fluids. 00 psi (0. MPa, bar) Maximum Air Inlet Pressure 00 psi (. MPa, bar) Maximum Fluid

More information

Pump Package Conversion Kits

Pump Package Conversion Kits Instructions - Parts Pump Package Conversion Kits A0B ENG To install an L00CM or L500CM Check-Mate Displacement Pump on an existing motor. For professional use only. Not for use in explosive atmospheres.

More information

15H882 Slider Bearing Kit

15H882 Slider Bearing Kit Instructions 15H882 Slider Bearing Kit 311616D ENG To replace slider bearings on E-Flo 4-Ball Piston Pumps. For professional use only. Important Safety Instructions Read all warnings and instructions in

More information

Stainless Steel Air Motor Conversion Kits

Stainless Steel Air Motor Conversion Kits Instructions Stainless Steel Air Motor Conversion Kits 096D Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Installation Pressure

More information

Low Pressure Fluid Filters

Low Pressure Fluid Filters Instructions - Parts List Low Pressure Fluid Filters 311775D EN For filtering large volumes of industrial paints and other industrial fluids. For professional use only. See page 3 for model numbers. 500

More information

Instructions-Parts 3A2801G. See page 2 for model part numbers, maximum fluid working pressure, and approvals.

Instructions-Parts 3A2801G. See page 2 for model part numbers, maximum fluid working pressure, and approvals. Instructions-Parts Mix Manifold Kit 3A2801G EN For at-the the-gun mixing of 2 component materials when used with a ProMix PD2K Proportioner. For professional use only. Important Safety Instructions Read

More information

Universal Hand Pump. Instructions D EN. - For transferring grease to Grease Jockey and G3 Systems - Part No Hand Operated - 35# Pump

Universal Hand Pump. Instructions D EN. - For transferring grease to Grease Jockey and G3 Systems - Part No Hand Operated - 35# Pump Instructions Universal Hand Pump 31758D EN - For transferring grease to Grease Jockey and G3 Systems - Part No. 47886 Hand Operated - 35# Pump 600 psi (4.13 MPa, 41.3 bar) Maximum Working Pressure 85 ml

More information

Merkur Displacement Pump

Merkur Displacement Pump Repair/Parts Merkur Displacement Pump 32792G EN For use with high-performance finishing and coating pumps in hazardous and non-hazardous locations. For professional use only. Important Safety Instructions

More information

24G621 Agitator Speed Controller Accessory

24G621 Agitator Speed Controller Accessory Instructions-Parts 24G62 Agitator Speed Controller Accessory 3A35A ENG Accessory kit to control and automatically maintain the speed of an air-powered agitator. For professional use only. Important Safety

More information

ProMix Auto Color and Catalyst Change Kits

ProMix Auto Color and Catalyst Change Kits Installation - Parts ProMix Auto Color and Catalyst Change Kits 311396C EN For proportional mixing of plural component coatings. For professional use only. See page 2 for kit information. Important Safety

More information

Displacement Pump. Instructions C EN. Model psi (3.7 MPa, 37 bar) Maximum Working Pressure 12 gpm Flow Rate

Displacement Pump. Instructions C EN. Model psi (3.7 MPa, 37 bar) Maximum Working Pressure 12 gpm Flow Rate Instructions Displacement Pump 308486C EN For use with petroleum-based lubricants only. For professional use only. Model 237527 540 psi (3.7 MPa, 37 bar) Maximum Working Pressure 12 gpm Flow Rate Important

More information

Pump/Manifold Kits. Instructions F ENG. To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only.

Pump/Manifold Kits. Instructions F ENG. To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only. Instructions Pump/Manifold Kits 311611F ENG To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only. See page 2 for a list of available kits. Important Safety Instructions

More information

INSTRUCTIONS PARTS LIST

INSTRUCTIONS PARTS LIST INSTRUCTIONS PARTS LIST 30812 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE See manual 308393 for complete gun washer warnings and instructions. Rev. B AIR SPRAY

More information

RS Gun Front Adapter Kits

RS Gun Front Adapter Kits Kit Instructions RS Gun Front Adapter Kits 332520A EN For adapting the internal mix gun for specific field applications. For professional use only. Important Safety Instructions Read all warnings and instructions

More information

Stainless Steel Air Motor Conversion Kits

Stainless Steel Air Motor Conversion Kits Instructions Stainless Steel Air Motor Conversion Kits 096B Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Graco Inc. P.O. Box

More information

Hose Heat Control Kit

Hose Heat Control Kit Instructions - Parts 248921 Hose Heat Control Kit 310798D For monitoring and controlling fluid temperature in low voltage heated hose. Not for use in explosive atmospheres. Important Safety Instructions

More information

Model For petroleum products and other fluids compatible with aluminum and buna-n seals.

Model For petroleum products and other fluids compatible with aluminum and buna-n seals. Instructions - Parts List Piston Hand Pump 311308C Model 260407 For petroleum products and other fluids compatible with aluminum and buna-n seals. Model 260406 For herbicides and other chemicals or fluids

More information

Motor Mounting Kits. Instructions J EN. 16C487 Motor Coupler Kit includes 2.25 in. (57.2 mm) key For NEMA 182/184 TC Frame ATEX Electric Motors

Motor Mounting Kits. Instructions J EN. 16C487 Motor Coupler Kit includes 2.25 in. (57.2 mm) key For NEMA 182/184 TC Frame ATEX Electric Motors Instructions Motor Mounting Kits 31160J EN To install electric motors on E-Flo 4-Ball Piston Pumps. For professional use only. (Kits do not include motors.) 16C487 Motor Coupler Kit includes 2.2 in. (7.2

More information

Elevators and Pump Supports

Elevators and Pump Supports Instructions Parts List Elevators and Pump Supports 306287V Used to raise and lower select Graco circulation and supply pumps. For professional use only. 200 psi (.4 MPa, 4 bar) Maximum Air Input Pressure

More information

Electronic Pulse Meters

Electronic Pulse Meters Instructions - Parts List Electronic Pulse Meters 308245P EN For use with petroleum-based lubricants only. 1500 psi (10.3 MPa, 103 bar) Maximum Working Pressure EFC (Electronic Fluid Commander): Model

More information

Ultimate Mx II. Parts List E psi (228 bar, 22.8 MPa) Maximum Working Pressure. Vac Model Type Lo-Boy Hi-Boy. Sherwin Williams 120V

Ultimate Mx II. Parts List E psi (228 bar, 22.8 MPa) Maximum Working Pressure. Vac Model Type Lo-Boy Hi-Boy. Sherwin Williams 120V Parts List Ultimate Mx II 3437E 3300 psi (228 bar, 228 MPa) Maximum Working Pressure Vac Model Type Lo-Boy Hi-Boy Sherwin Williams 20V Sherwin Williams 20V 695 Standard 826068 826067 Premium 826070 826069

More information

Stainless Steel 1000cc Lower

Stainless Steel 1000cc Lower Instructions - Parts List Stainless Steel 1000cc Lower 311716C ENG Designed for low to medium pressure, medium volume circulation of finishing materials. For professional use only. Not approved to European

More information

Cleaning System. Instructions/Parts A

Cleaning System. Instructions/Parts A Instructions/Parts Cleaning System 310623A 234533 For use with Multi-Orifice Linear Streaming Applicator (MOLSA) to apply automotive Liquid Applied Sound Deadener (LASD) materials. 100 psi (0.68 MPa, 6.8

More information

Instructions 3A4793B EN. See page 3 for a complete list of model descriptions and part numbers.

Instructions 3A4793B EN. See page 3 for a complete list of model descriptions and part numbers. Instructions Variable Frequency Drives 3A4793B EN Variable frequency drives (VFDs) to power and control electric motor driven agitators. For professional use only. Not approved for use in explosive atmospheres

More information

Repair D EN. Displacement Pump. Model , Series A 190ES/ 210ES, 190LTS/210LTS Pro 230ES, Pro 270ES Pro 270GS

Repair D EN. Displacement Pump. Model , Series A 190ES/ 210ES, 190LTS/210LTS Pro 230ES, Pro 270ES Pro 270GS Repair Displacement Pump 312015D EN Model 255198, Series A 190ES/ 210ES, 190LTS/210LTS Pro 230ES, Pro 270ES Pro 270GS Maximum Working Pressure 3300 psi (223 bar, 23 MPa) Important Safety Instructions Read

More information

Vertical Hydraulic Driver

Vertical Hydraulic Driver Repair-Parts Vertical Hydraulic Driver 3A001C EN For use with a vertically mounted proportioning pump. For professional use only. D30 - Vertical Hydraulic Driver 100 psi (8. MPa, 8.7 bar) Maximum Working

More information

Integrated and 2-Button Interlock Air Controls for use with Supply Systems.

Integrated and 2-Button Interlock Air Controls for use with Supply Systems. Instructions-Parts Air Controls 312374A Integrated and 2-Button Interlock Air Controls for use with Supply Systems. Important Safety Instructions Read all warnings and instructions in this manual. Save

More information

Displacement Pump. Repair-Parts. Contents D ENG. Part No psi (13.8 MPa, 138 bar) Maximum Working Pressure

Displacement Pump. Repair-Parts. Contents D ENG. Part No psi (13.8 MPa, 138 bar) Maximum Working Pressure Repair-Parts Displacement Pump 313383D ENG For use with polyurethane foam, polyurea, and similar non-flammable material. For professional use only. Not for use in explosive atmospheres. Part No. 257344

More information

ST Max 395/495/595 ST Max II 490/495/595

ST Max 395/495/595 ST Max II 490/495/595 Parts ST Max 395/495/595 ST Max II 490/495/595 309706P EN For professional use only. 3300 psi (22.8 MPa, 228 bar) Maximum Working Pressure See page 2 for model information. Important Safety Instructions

More information

4:1 Fusion Static Mixer Kit

4:1 Fusion Static Mixer Kit Instructions-Parts 4:1 Fusion Static Mixer Kit 1294A For use with 4:1 ratio material and Graco Fusion MP gun only. Not for use in explosive atmospheres. 500 psi (24.5 MPa, 245 bar) Maximum Fluid Working

More information

Horizontal Hydraulic Driver

Horizontal Hydraulic Driver Repair-Parts Horizontal Hydraulic Driver 3A000A ENG For use with two horizontally mounted proportioning pumps. For professional use only. Not for use in explosive atmospheres. 5877 - Horizontal Hydraulic

More information

Air Regulator 100 psi (.7 MPa, 7 bar) Maximum Air Inlet Pressure

Air Regulator 100 psi (.7 MPa, 7 bar) Maximum Air Inlet Pressure INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 30934 Rev. A Air Regulator 00 psi (.7 MPa, 7

More information

Field Sensitive Magnetic Proximity Cycle Switch

Field Sensitive Magnetic Proximity Cycle Switch Instructions Field Sensitive Magnetic Proximity Cycle Switch 3A0884A EN Bulletin 15600 4-pin micro FSM proximity switch use with MX, MXP & MGO Valve sections. Dry contact, ceramic magnet proximity switch

More information

Fast-Flo Air Motor 12.5 bar (1.25 MPa, 180 psi) Maximum Air Working Pressure

Fast-Flo Air Motor 12.5 bar (1.25 MPa, 180 psi) Maximum Air Working Pressure 03652 Instructions Parts List Fast-Flo Air Motor 12.5 bar (1.25 MPa, 180 psi) Maximum Air Working Pressure 307456S Model 215963, Series A 101.6 mm (4 in.) stroke NOTE: To replace Air Motor 215963, order

More information

Air Actuated Dispense Valve

Air Actuated Dispense Valve Instructions-Parts Air Actuated Dispense Valve 312782B To dispense plural component fluids and solvents. Part No. 15X303 High Pressure Dispense Valve 3000 psi (21 MPa, 210 bar) Maximum Fluid Working Pressure

More information

Mechanical Pulse Meter

Mechanical Pulse Meter Instructions Parts List Mechanical Pulse Meter Part No. 215474 Measures in pints, quarts, and gallons 308847D Part No. 215475 Measures in liters For antifreeze or oil. Sends 10 pulses per quart (11 pulses

More information

SaniForce Air Motors. Instructions/Parts 3A1211N

SaniForce Air Motors. Instructions/Parts 3A1211N Instructions/Parts SaniForce Air Motors 3A2N EN For use on SaniForce piston pumps, which are used to transfer medium to high viscosity fluids in applications requiring high sanitation. For professional

More information

Pressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -

Pressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings - Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural

More information

Split Manifold Kits. Installation Parts List C. Converts Husky 307 Diaphragm Pump to dual fluid inlet or outlet

Split Manifold Kits. Installation Parts List C. Converts Husky 307 Diaphragm Pump to dual fluid inlet or outlet Installation Parts List Split Manifold Kits 0849C Converts Husky 07 Diaphragm Pump to dual fluid inlet or outlet Part No. 2720 For Husky 07 Polypropylene Pumps Part No. 272 For Husky 07 cetal Pumps Important

More information

Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. Model : 2000 psi (13.8 MPa, 138 bar) Maximum Working Pressure

Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. Model : 2000 psi (13.8 MPa, 138 bar) Maximum Working Pressure - Parts Proportioning Pumps 3068F Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in this manual and in manuals

More information

Merkur Spray Packages

Merkur Spray Packages Instructions - Parts List Merkur Spray Packages 309463N Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. TI20A TI202A TI203A II 2 G Contents Manual

More information

Air Actuated Dispense Valve

Air Actuated Dispense Valve Instructions-Parts Air Actuated Dispense Valve 312782D EN To dispense plural component fluids and solvents. For professional use only. Part No. 15X303 High Pressure Dispense Valve 3000 psi (21 MPa, 207

More information

2K Ultra-Lite Dispense Kits

2K Ultra-Lite Dispense Kits Instructions - Parts 2K Ultra-Lite Dispense Kits 20A For use with Reactor E-0 Proportioners. Part No. 24964 Cold Spray Kit For spraying : mix ratio materials, including epoxies, polyurethane foam, and

More information

950SeriesSealantGun. Instructions-Parts D. Models Palm Grip Gun: Pistol Grip Gun: ENG

950SeriesSealantGun. Instructions-Parts D. Models Palm Grip Gun: Pistol Grip Gun: ENG Instructions-Parts 950SeriesSealantGun 309968D ENG For dispensing sealant from caulking tubes. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual.

More information

Mark V Premium and Mark V Max Electric Airless Sprayers

Mark V Premium and Mark V Max Electric Airless Sprayers Parts Mark V Premium and Mark V Max Electric Airless Sprayers 3A2245B EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European

More information

Single Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping System

Single Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping System Instructions Single Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping System 308613H EN - For the application of road marking paints and coatings - - For professional use only

More information

Split Manifold Kits. Installation - Parts List D. Converts Huskyt 307 Diaphragm Pump to dual fluid inlet or outlet

Split Manifold Kits. Installation - Parts List D. Converts Huskyt 307 Diaphragm Pump to dual fluid inlet or outlet Installation - Parts List Split Manifold Kits 0849D Converts Huskyt 07 Diaphragm Pump to dual fluid inlet or outlet Part No. 2720 For Husky 07 Polypropylene Pumps Part No. 272 For Husky 07 cetal Pumps

More information

Instructions Parts List

Instructions Parts List Instructions Parts List DOUBLE ACTING Falcon and Falcon II Air Motors 08995E Part No. 41504, Series C Falcon Air Motor 150 psi (1.0 MPa, 10 bar) Maximum Air Input Pressure Part No. 41505, Series C Falcon

More information

NXT Air Motor for FRP

NXT Air Motor for FRP Instructions - Parts NXT Air Motor for FRP AB EN For use with composites in hazardous or non-hazardous locations. For professional use only. Model M0LNL 00 psi (0. MPa,.0 bar) Maximum Working Pressure

More information

Instructions Parts List

Instructions Parts List Instructions Parts List WITH OR WITHOUT ELECTRONIC METERS V5 V12 EM6 and EM12Dispense Valves 308642N For dispense of petroleum and synthetic based oils. 1500 psi (10 MPa, 102 bar) Maximum Working Pressure

More information

Ultra Max II Ultimate Mx II

Ultra Max II Ultimate Mx II Parts Ultra Max II Ultimate Mx II 3362S EN - For application of architectural paints and coatings This manual covers every series - Korean patent 0-057968 3300 psi (228 bar, 228 MPa) Maximum Working Pressure

More information

Fire-Ball 225, 300, and 425 Oil Pumps

Fire-Ball 225, 300, and 425 Oil Pumps Installation and Operation Fire-Ball 225, 300, and 425 Oil Pumps 309868B For non-corrosive and non-abrasive oils and lubricants only. Important Safety Instructions Read all warnings and instructions in

More information

INSTRUCTIONS-PARTS LIST

INSTRUCTIONS-PARTS LIST INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 307 620 Rev. M Supersedes J and PCN K PORTABLE

More information

Displacement Pump Used in the Ultra Max 695 Sprayers 3000 psi (207 bar, 21 MPa) MAXIMUM WORKING PRESSURE

Displacement Pump Used in the Ultra Max 695 Sprayers 3000 psi (207 bar, 21 MPa) MAXIMUM WORKING PRESSURE INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308815 Rev. J Displacement Pump Used in the Ultra Max 695 Sprayers 3000 psi (207

More information

PROVEN QUALITY. LEADING TECHNOLOGY.

PROVEN QUALITY. LEADING TECHNOLOGY. Instructions Stainless Steel, Air Operated Dispensing Valve 306715M EN 3000 psi (21 MPa, 210 bar) Maximum Working Pressure Model No. 205612, Series B Without seat or fluid needle. Model No. 205435 Includes

More information

Proportioning Pumps. Repair - Parts M EN

Proportioning Pumps. Repair - Parts M EN - Parts Proportioning Pumps 3068M EN Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. For professional use only. For professional use only. Not for use in explosive atmospheres.

More information

Instructions/Parts List

Instructions/Parts List Instructions/Parts List FOR 2: RATIO STANDARD PUMPS Standard Air Motor 30785L 80 psi (.25 MPa, 2.5 bar) Maximum Air Working Pressure Model 204464, Series B For Pump Model 204456 Model 204722, Series C

More information

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE INSTRUCTIONS PARTS LIST 308 493 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. A Second Gun Hose Kit 100 psi (6.9 bar) Maximum Working Pressure These kits include

More information

RAZOR Siphon Feed Gun

RAZOR Siphon Feed Gun Instructions - Parts List RAZOR Siphon Feed Gun 312106G EN A premier gun for the automotive refinish market for use with thin to medium viscosity materials (14-20 seconds Zahn #2 cup). If spraying heavier

More information

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber

More information

Carbon Steel 1000cc Lower

Carbon Steel 1000cc Lower Instructions - Parts List Carbon Steel 000cc Lower 377E ENG Designed for low to medium pressure, medium volume circulation of finishing materials. For professional use only. Not approved to European explosive

More information

Spray Nozzle Adapters

Spray Nozzle Adapters INSTRUCTIONS-PARTS LIST 306 788 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. G Supersedes Rev. F DIRECTIONAL

More information

Dura-Flo Lowers A

Dura-Flo Lowers A Instructions - Parts Dura-Flo Lowers 311825A Carbon Steel or Stainless Steel Lowers, with Severe-Duty Rod and Cylinder Dura-Flo 1800 (430 cc) Lowers Dura-Flo 2400 (580 cc) Lowers Important Safety Instructions

More information

Displacement Pump. Repair-Parts. Contents B EN. Part No psi (22.7 MPa, 227 bar) Maximum Working Pressure

Displacement Pump. Repair-Parts. Contents B EN. Part No psi (22.7 MPa, 227 bar) Maximum Working Pressure Repair-Parts Displacement Pump 313123B EN For use with polyurethane foam, polyurea, and similar non-flammable material. Not for use in explosive atmospheres. Part No. 2577 3300 psi (22.7 MPa, 227 bar)

More information

Power-Lock Heated Hose

Power-Lock Heated Hose Instructions - Parts Power-Lock Heated Hose 309572M For use with plural component proportioners. Not for use in explosive atmospheres. See page 3 for Maximum Fluid Working Pressure 130 psi (0.9 MPa, 9

More information

Displacement Pump INSTRUCTIONS-PARTS LIST psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A. Model , Series A

Displacement Pump INSTRUCTIONS-PARTS LIST psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A. Model , Series A INSTRUCTIONS-PARTS LIST 309277 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. B Displacement Pump 3600 psi (250

More information

Old Seal Kits. Instructions - Parts B. Piston Seal Kits, see page 2. Cylinder Seal Kits for A-Side Pumps, see page 2

Old Seal Kits. Instructions - Parts B. Piston Seal Kits, see page 2. Cylinder Seal Kits for A-Side Pumps, see page 2 Instructions - Parts Old Seal Kits 32348B To replace proportioning pump piston seal sets or cylinder seal sets used on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions

More information

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)

More information

Plus Mark V Mark V Plus

Plus Mark V Mark V Plus Parts List Ultra Max II 3363K ENG 3300 psi (228 bar, 228 MPa) Maximum Working Pressure Vac Model Lo-Boy Hi-Boy 240 Europe 240 Europe Multi-cord 240 Asia 695 25534 249663 795 249666 25349 795 Plus 25665

More information

Dura-Flo Lowers. Instructions - Parts F ENG. Dura-Flo 1800 (430 cc) Lowers Dura-Flo 2400 (580 cc) Lowers

Dura-Flo Lowers. Instructions - Parts F ENG. Dura-Flo 1800 (430 cc) Lowers Dura-Flo 2400 (580 cc) Lowers Instructions - Parts Dura-Flo Lowers 3825F ENG Carbon Steel or Stainless Steel Lowers, with Severe-Duty Rod and Cylinder. Dura-Flo 800 (430 cc) Lowers Dura-Flo 2400 (580 cc) Lowers Important Safety Instructions

More information

Ultra Platinum Sprayers

Ultra Platinum Sprayers Parts Ultra Platinum Sprayers 313565F EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European explosive atmosphere locations.

More information

High-Flo Lowers. Instructions - Parts List M ENG

High-Flo Lowers. Instructions - Parts List M ENG Instructions - Parts List High-Flo Lowers 3690M ENG Designed for low pressure, medium volume circulation of finishing materials. For professional use only. Important Safety Instructions Read all warnings

More information

3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A Ultra Max II and Ultimate Mx II 695 and 795

3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A Ultra Max II and Ultimate Mx II 695 and 795 Repair Displacement Pump 310643H 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model 248204, Series A Ultra Max II and Ultimate Mx II 695 and 795 Model 248205, Series A Ultra Max II and Ultimate

More information

Model , Series A 9 in. (23 cm) roller frame with 45 angle and 12 in. reach 1/2 in. (13 mm) nap roller cover

Model , Series A 9 in. (23 cm) roller frame with 45 angle and 12 in. reach 1/2 in. (13 mm) nap roller cover Operating Instructions 309899 Rev. A This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS Manufactured by Model 246818, Series A 9 in. (23 cm) roller frame

More information

XHF Spray Gun. Instructions - Parts 3A2799A EN. Part No , Series A

XHF Spray Gun. Instructions - Parts 3A2799A EN. Part No , Series A Instructions - Parts XHF Spray Gun 3A2799A EN For spraying viscous materials at high flow rates. For professional use only. Part No. 262854, Series A Includes an XHD RAC Guard and XHD429 SwitchTip 7250

More information

Parts 3A2528C EN. Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers

Parts 3A2528C EN. Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers Parts Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers 3A2528C EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use

More information

RoadLazer Skid-Mount OEM Striping Package

RoadLazer Skid-Mount OEM Striping Package RoadLazer Skid-Mount OEM Striping Package - For OEM use in customized line striper applications only - 310664D EN Model 234672 Hydraulic Stainless Steel 2000 psi (138 bar) Maximum Working Pressure Read

More information

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model

More information

Displacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A

Displacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A INSTRUCTIONS-PARTS LIST 308798 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. U Displacement Pump 3600 psi (250

More information

Airless Spray Gun. Instructions Parts List H. Model , Series H psi (21.0 MPa, 210 bar) Maximum Working Pressure

Airless Spray Gun. Instructions Parts List H. Model , Series H psi (21.0 MPa, 210 bar) Maximum Working Pressure Instructions Parts List Airless Spray Gun 306796H Model 206408, Series H 3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure Important Safety Instructions Read all warnings and instructions in this manual.

More information

Package solutions for pressure washing applications. For use only with water and cleaning solutions. For professional use only.

Package solutions for pressure washing applications. For use only with water and cleaning solutions. For professional use only. Instructions - Parts Hydra-Clean Packages 312585M EN Package solutions for pressure washing applications. For use only with water and cleaning solutions. For professional use only. Important Safety Instructions

More information

Ink Pump Packages. Instructions - Parts 3A0096B ENG

Ink Pump Packages. Instructions - Parts 3A0096B ENG Instructions - Parts Ink Pump Packages 3A0096B ENG For use with medium to high viscosity inks. For professional use only. Not for use in explosive atmospheres. With priming piston and MaxLife rod and cylinder.

More information

ASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.

ASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings. Instruction-Parts ASM Maxi Poles 312483B For the application of architectural paints and coatings. 3400 Series 4050 psi (27.92 MPa, 280 bar) Maximum Working Pressure Important Safety Instructions Read

More information

Instructions Parts List. Table of Contents F. Part No Part No

Instructions Parts List. Table of Contents F. Part No Part No Instructions Parts List PrecisionFlo XL Metering Valve For use when dispensing fluids that meet at least one of the following conditions for non-flammability: The fluid has a flash point above 140F (60C)

More information

Operation. GMAX II 3900/5900/5900HD/5900 Convertible/7900 TexSpray 5900HD Convertible/7900HD Airless Sprayers 3A0242B

Operation. GMAX II 3900/5900/5900HD/5900 Convertible/7900 TexSpray 5900HD Convertible/7900HD Airless Sprayers 3A0242B Operation GMAX II 3900/5900/5900HD/5900 Convertible/7900 TexSpray 5900HD Convertible/7900HD Airless Sprayers - For Portable Airless Spraying of Architectural Coatings and Paints - 3300 psi (22.8 MPa, 228

More information

Pistol Grip Mastic Flo Gun

Pistol Grip Mastic Flo Gun Instructions Parts List Pistol Grip Mastic Flo Gun 308206E For spraying highly filled texture materials. 4050psi (27.6 MPa, 276 bar) Maximum Working Pressure Model 224990, Series A; Model 289670 With Diffuser,

More information

Displacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A

Displacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A INSTRUCTIONS-PARTS LIST 309277 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. M Displacement Pump 3600 psi (250

More information

Husky 515/Husky 716 Drum Pump Kits and Packages

Husky 515/Husky 716 Drum Pump Kits and Packages C/ Maximiliano Thous, 22B. 46009, Valencia (España) Tlf: 902 304 36 Fax: 902 876 377 www.quilinox.com quilinox@quilinox.com Husky 55/Husky 76 Drum Pump Kits and Packages 3096D Important Safety Instructions

More information

T1-Titanium Non-HVLP Spray Gun

T1-Titanium Non-HVLP Spray Gun T1-Titanium Non-HVLP Spray Gun THE SPRAY GUN PEOPLE FOR PRODUCT INFORMATION CALL: 1-800-742-7731 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

More information

D Instructions/Parts. Siphon Feed Detail Spray Gun D

D Instructions/Parts. Siphon Feed Detail Spray Gun D Instructions/Parts D-5-55 Siphon Feed Detail Spray Gun FOR PRODUCT INFORMATION CALL: 1-800-742-7731 309991D Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

More information

President Pump WITH PRIMING PISTON

President Pump WITH PRIMING PISTON Instructions Parts List President Pump WITH PRIMING PISTON 306746K 24:1 Ratio Models 4320 psi (29.8 MPa, 298 bar) Maximum Fluid Working Pressure Part No. 205791, Series E 5 & 10 gallon (19 & 38 liter)

More information

Instructions-Parts. Dosing Pumps J EN. System. See page 2 for model part numbers and information.

Instructions-Parts. Dosing Pumps J EN. System. See page 2 for model part numbers and information. Instructions-Parts Dosing Pumps 332339J EN To pressurize and proportion fluid in a ProMix PD2K Electronic Positive Displacement Proportioning System. For professional use only. Important Safety Instructions

More information