PRECISION FAIL-SAFE LOCK-UP SPEED. breeds:

Transcription

1 A M U R A C T

2 PRECISION FAIL-SAFE LOCK-UP SPEED breeds: There are currently four breeds of AmurAct available to the general population. Each has defining characteristics for purpose and habitat. LS: (Standard position) Actuator rests above valve LE: Extended plate to move actuator away from Valve AMA - is the breed defined for high temperature and robust blending. A 3-Way flanged steel valve with ANSI 150 or 300 Lb. ratings, this rugged design was made to perform where others cannot. Available in multiple port sizes for finely tuned flows in sizes from 1/2" through 2". Particularly suited for High Temperature, Hot AMB - is the breed defined for a wide range of compact 2-way and 3-Way applications. Available in bronze or CF8M bodies, this NPT end design is chocked full of design choices, from five different kinds of hard and soft trim to Cv's ranging from 0.25 up to 40...from 1/2" through 2". Water and Hot Oil applications. ACTUATION USING 90-DEGREE ROTARY ACTUATORS ROTARY TO LINEAR MOTION LINKAGE FOR GLOBE VALVE Linkage needs no lubrication for 100,000 cycles Another Dependable, Rugged Precision Product Warren Controls All internal linkage&parts and fasteners made fromfrom corrosion resistant materials.

3 NO PRESSURE KICK-BACK noun: AmurAct definition: An innovative, specially designed linkage that enhances a valve s equal percentage flow characteristic providing rapid response to load changes and accurate, stable control of water, steam and common energy transfer fluids in a variety of demanding industrial and commercial applications. Common applications for the AmurAct are steam, water loads for industrial water heaters, heat exchangers and energy coils. Due to their stainless steel construction the AmurAct also thrives in the wild! Outdoor applications such as lumber drying kilns are a natural with the NEMA 4X option. The AmurAct easily adapts to the hot and arid plains. With the LE option, AmurAct is capable of taking on hot transfer oils and super heated steam up to 800 F. SPEED AMURACT...A NEW BREED OF ACTUATION! AMC - is the breed defined that excels in higher capacity flows with a wide range of 2-way and 3-Way applications. This cast iron flanged body is available in sizes from 2 1/2" to 4", depending on profile. Various balanced trim designs help achieve incredible close off performance for such a compact actuator. AMD - is the breed defined for high temperature flow and pressure control. This 2Way steel valve with ANSI 150 or 300 Lb. ratings includes a bolted bonnet and cage retained seat for maximum durability and ease of long term maintenance. End connection options are flanged, NPT or socket weld. An optional extension bonnet will accommodate the highest temperature applications possible for electric actuation. A rugged performer, available in multiple port sizes for finely tuned flows in sizes from 1/2" through 2". CO -HABITATION habitat: FAIL-SAFE LOCK-UP

4 THE BREED The AmurAct is a new breed of industrial actuator that not only has speed and power, it is built to last and at a very affordable price. Mated up with a broad offering of Warren Controls proven industrial valve body designs in sizes up to 4", with a myriad of construction materials, trim design and end connection choices, performance and value become synonymous as do robustness and elegance. Normally the AmurAct is atop a valve assembly parallel to the pipeline with the motor directly behind the linkage (LS). For extended temperature range the AmurAct adjusts to a new position, extends its tail to bring the rotated motor 180 degrees on the linkage shaft to go beyond the linkage safety shield, far from the pipeline (LE) (see example above). Extended Temperature Version Animal safety: This species has such an intelligent design that safety is second nature. The internal lever mechanism is in an inherent lockup mode in its natural resting position, just like the jaws of the creature - ensuring guaranteed failure modes. So incredible is this ability that the electric motor can be removed while the valve is in service, and still maintain the lockup mode. But the safety does not stop there. The motor has a patented Enerdrive Fail-Safe Capacitive back up system for accommodating multiple repetitive power failures, ensuring desired fail safe position of the control valve. These are not best in class features - this is an entire new class unto itself! 100 FLOW CHARACTERISTIC % FLOW PRECISE CONTROLS AT LOW FLOW RATE EQ % VALVE FINAL FLOW 10 FAST RESPONSE AT HIGH FLOW RATES % TIME

5 NO PRESSURE KICK-BACK noun: AmurAct definition: An innovative, specially designed linkage that enhances a valve s equal percentage flow characteristic providing rapid response to load changes and accurate, stable control of water, steam and common energy transfer fluids in a variety of demanding industrial and commercial applications. Common applications for the AmurAct are steam, water loads for industrial water heaters, heat exchangers and energy coils. Due to their stainless steel construction the AmurAct also thrives in the wild! Outdoor applications such as lumber drying kilns are a natural with the NEMA 4X option. The AmurAct easily adapts to the hot and arid plains. With the LE option, AmurAct is capable of taking on hot transfer oils and super heated steam up to 800 F. SPEED AMURACT...A NEW BREED OF ACTUATION! AMC - is the breed defined that excels in higher capacity flows with a wide range of 2-way and 3-Way applications. This cast iron flanged body is available in sizes from 2 1/2" to 4", depending on profile. Various balanced trim designs help achieve incredible close off performance for such a compact actuator. AMD - is the breed defined for high temperature flow and pressure control. This 2Way steel valve with ANSI 150 or 300 Lb. ratings includes a bolted bonnet and cage retained seat for maximum durability and ease of long term maintenance. End connection options are flanged, NPT or socket weld. An optional extension bonnet will accommodate the highest temperature applications possible for electric actuation. A rugged performer, available in multiple port sizes for finely tuned flows in sizes from 1/2" through 2". CO -HABITATION habitat: FAIL-SAFE LOCK-UP

6 PRECISION FAIL-SAFE LOCK-UP SPEED breeds: There are currently four breeds of AmurAct available to the general population. Each has defining characteristics for purpose and habitat. LS: (Standard position) Actuator rests above valve LE: Extended plate to move actuator away from Valve AMA - is the breed defined for high temperature and robust blending. A 3-Way flanged steel valve with ANSI 150 or 300 Lb. ratings, this rugged design was made to perform where others cannot. Available in multiple port sizes for finely tuned flows in sizes from 1/2" through 2". Particularly suited for High Temperature, Hot AMB - is the breed defined for a wide range of compact 2-way and 3-Way applications. Available in bronze or CF8M bodies, this NPT end design is chocked full of design choices, from five different kinds of hard and soft trim to Cv's ranging from 0.25 up to 40...from 1/2" through 2". Water and Hot Oil applications. ACTUATION USING 90-DEGREE ROTARY ACTUATORS ROTARY TO LINEAR MOTION LINKAGE FOR GLOBE VALVE Linkage needs no lubrication for 100,000 cycles Another Dependable, Rugged Precision Product Warren Controls All internal linkage&parts and fasteners made fromfrom corrosion resistant materials.

7 Enerdrive or the Enerdrive System is both a patent and trademark of National Environmental Products, Ltd. The patented Enerdrive System The patented Enerdrive System, the modern, electronic replacement for antiquated spring return actuator is a super capacitive fail-safe return system. Since its introduction, Enerdrive has proven its versatility and dependability. As a system that is fully incorporated into the PC board for both low and line voltage service, the power generated and stored in its capacitors will drive the control valve at full rated torque to its safety position. It is 100% operational with the resumption of power. Each unit may be manually positioned with the clutch override that is standard on each actuator. Most importantly, the final fail position, either normally open or normally closed may be chosen at any time either before or after installation with the flick of a dip switch. Nema 4X protection The stainless steel materials used to construct an AmurAct linkage provide long-term protection against corrosion. Added protection is available for the electric motor component of the AmurAct actuator. The optional NEMA 4, 4X enclosure protects the motor from moisture and airborne dust and dirt. It includes an anti-condensate heater, and shelters your AmurAct if it needs to survive in a harsh environment. Nema 4X enclosure

8 2600 Emrick Blvd Bethlehem, PA USA