Top View Single or Double. Side View - Single. Table 1
|
|
- Cleopatra Walton
- 5 years ago
- Views:
Transcription
1
2
3 -1 Length, bonnets closed locking screws in -2 Length, bonnets open, locking screws out -3 Length, bonnets closed, with wedgelocks -4 Length, bonnets open with wedgelocks B-1 Height, PI flange single B-2 Height, clamp hub single C Width, no side outlets D Top View Single or Double D C B Size Working Pressure Vertical Bore (in Fig. 2 Side View - Single B-1 B-2 C D-1 D-2 E-1 E-2 F-1 F-2 7 1/" ,600 5, /" ,800 5, /" ,550 6, /" ,800 6,750 11" ,300 9,900 11" ,600,200 11" ,400 11,300 11" ,300,400 5/8" ,200 14,300 5/8" ,700 14,800 5/8" ,300,400 5/8' ,700 43,250 3/4" ,700 26,650 3/4" ,750 26,940 3/4" ,300 43,500 3/4" ,900 56, /4" ,650 25,500 1/4" ,250 25,150 1/4" ,000 58,000 1/4" ,650 65, /4" ,000 44,200 Single pprox. Weight (lb Double pprox. Weight (lb NOTE: ll dimensions are in inches unless otherwise specified. Table 1 D Side View - Double Fig. 3 F E D-1 Center line of side outlet to bottom PI flange D-2 Center line of side outlet to bottom of clamp hub E-1 Height, PI flange outlet E-2 Height, clamp hub double F-1 Center line of upper side outlet to bottom flange F-2 Center line of upper side outlet to bottom hub 3
4 CFI "CLSS U" BOP OPERTING CHRCTERISTICS ll Blowout Preventers Conform to PI Specification, Latest Edition Hydraulic Control System of the CFI "Class U" Preventers Opening and Bonnet Closing Fig. 4 Closing and Bonnet Opening Bore Size & Working Pressure Gallons to Open (U.S. Gallons to Close (U.S. Locking Screw of turns Closing ratio Opening ratio Gallons to Open (U.S. LRGE BORE SHER BONNETS Gallons to Close (U.S. Locking Screw of turns Closing ratio Opening ratio 7 1/" all WP 11" 3, 5, M : 1 2.2: : 1 2.5: : 1 4.8: 1 11"15M : 1 2.2: : 1 3.7: 1 5/8" 3, 5, M 5/8" 15M 3/4" 3M & 5M 3/4" M 3/4" M 20 3/4" & 1/4" 2M & 3M 1/4" 5M 1/4" M 26 3/4"3M : 1 2.3: : 1 4.5: : 1 3.6: : 1 6.0: : 1 2.3: : 1 4.4: : 1 2.3: : 1 4.4: : 1 3.7: : 1 1.3: : 1 1.7: : 1 4.0: : 1 4.0: : 1 1.0: Table 2 4
5 RM BLOCKS FOR CFI "CLSS U" BOP SINGLE, DUL ND SHER RMS PIPE RMS - SINGLE & DUL - Fig. 5 Pipe rams for Control Flow's "Class U" BOPs are available to fit a wide variety of tubing, drill pipe, drill collar and casing sizes. ll rams are suitable for Sour Service - H 2 S - per NCE MR-O1-75 specifications. The CFI "Class U" ram packers are self-feeding with a large reserve of elastomer to ensure a long-lasting seal under all conditions. packers lock into place and cannot be dislodged by the well flow. SHER RMS - Fig. 6 Control Flow's Shearing s shear the pipe in the hole to allow quick sealing in the event of unexpected downhole pressure or conditions. Shearing capabilities for the CFI "Class U" BOP's vary with the style of rams, bonnets and/or boosters. ll styles of Control Flow's Shearing s offer the following features: 3,000 shearing operating pressure Single-piece body construction Suitable for Sour Service - H 2 S - per NCE MR ll sizes of the CFI "Class U" BOP packers are available in a wide variety of elastomer material. Refer to the chart for the type of elastomer that best suits your needs. SELECTED COMPOUNDS FOR THE PETROLEUM INDUSTRY Compound Number Polymer Hardness Expected Temp. Range Nitrile to +275 F Nitrile to +275 F Service Very low compression set. High temperature, standard petroleum service Low compression set Good abrasion resistance H2S capability petroleum service 1919 Nitrile to +275 F Explosive decompression reisitant Sour gas service, CO2 high pressure. Very low compression set 8247 Nitrile to +325 F High temperature, low set EDPM to +400 F Steam service to +500 F Epichiorohydrin to +250 F Good low/high temperature capability Good resistance to petroleum products Fig Flourel* to +400 F 207 Flourel* to +400 F Green color, meeting Mil-R Type I Class II MS 7279 Brown color, Meeting Mil-R Type I, Class I MS 7278, MS Flourel* to +500 F Softer version of 608, Flourel* to +500 F Blow out resistant, H2S capability Sour crude service 699 has short elongation Viton B* * to +400 F Good explosive decompression resistance, high pressure gas Viton GH* * to +400 F Steam and H2S Resistance to 450 F Max flas to +400 F Steam, mine, petroleum resistant Fig. 6 * Fluorel - Trade mark of 3M ** Viton - Trade mark of E.I. DuPont Table 3 5
6 CFI "CLSS U" BOP PRTS ll Parts Conform to PI Specification, Latest Edition ll Control Flow-built replacement parts for the CFI "Class U" hydraulic preventer meet or exceed the original equipment manufacturer's specification and conforms to all applicable PI and other industry standards. Replacement procedures are, in all cases, identical to the original equipment manufacturer. Refer to your CFI "Class U" maintenance manual for specific tear-down or assembly instructions. If the appropriate publication is unavailable to you, call the Control Flow District Office nearest you for assistance in any phase of parts installation. REPIR SERVICES Should you wish to take advantage of Control Flow's economical repair or remanufacturing capabilities, our Houston, Texas and Moore, Oklahoma facilities are fully equipped and staffed to get your CFI "Class U" preventer, or any other drilling and production pressure control equipment back in your operation fast. Item Part Name Req'd Single Req'd Double 7 1/" -3, /" -5, /" -, /" -15,000 11" -3,000 11" -5,000 1 Body Intermediate Flange Bonnet ( 44226( 44226( 44226( 44233( ( 5 Piston, Operating Cylinder, Operating Housing Locking Screw Locking Screw Piston, Change Open Piston, Change Close Cylinder, Change Bolt, Bonnet Bolt, Bonnet Studs, Locking Screw Housing Nuts, Locking Screw Housing Check Valve, Plastic Screw, Plastic Packing 2 4 Pipe Plug, Plastic Packing Plastic Energizing Plastic Packing S eal Connecting Rod 4 * 8* Back Up Seal, Bonnet Pin, Guide Operating Cylinder Operating Piston Rod to Int. Flange Wear Operating Piston Seal Tail Rod Wiping Change Piston to Body Change Piston Rod to Int Flange Change Cyl to Int Flange Change Cyl to Bonnet Change Piston Bonnet Bolt Retainer C ap Screw, Intermediate Flange to Bonnet * * 32* * Gland, Bleeder Plug, Bleeder Lifting Eye Packing, Plastic Washer Retainer Lip Seal, Operating Piston *Only used on,000 WP Preventers. 11" 15,000 and 5/8" 15,000 requires 8 for singles and for doubles. ** 5/8 through 3/4" and 20 3/4" through 26 3/4" require 24 for singles and 48 for double. Please check with Control Flow representative for correct part numbers 5/8" 5,000 Serial 6 and below Table 4
7 Fig. 7 Item Part Name 11"-,000 5/8"-3,000 5/8"-5,000 5/8"-,000 3/4"-3,000 3/4"-5,000 1/4"-2, /4"-3,000 1 Body Intermediate Flange Bonnet R am ( ( ( ( ( ( ( ( 5 Piston, Operating Cylinder, Operating Housing Locking Screw Locking Screw Piston, Change Open Piston, Change Close Cylinder, Change Bolt, Bonnet Bolt, Bonnet Studs, Locking Screw Housing Nuts, Locking Screw Housing Check Valve, Plastic Screw, Plastic Packing Pipe Plug, Plastic Packing Plastic Energizing Plastic Packing Seal Connecting Rod Back Up Seal, Bonnet Pin, Guide Operating Cylinder Operating Piston Rod to Int. Flange Wear Operating Piston Seal Tail Rod Wiping Change Piston to Body Change Piston Rod to Int Flange Change Cyl to Int Flange Change Cyl to Bonnet Change Piston Bonnet Bolt Retainer Cap Screw, Intermediate Flange to Bonnet Gland, Bleeder 38 Plug, Bleeder 39 Lifting Eye 40 Packing, Plastic Washer Retainer Lip Seal, Operating Piston Table 5 7
8 CFI "CLSS U" BOP LRGE BORE SHER BONNET ll Blowout Preventers' Components Conform to PI Specification, Latest Edition Fig. 8 Table 6 Item Description ( 2 Required per Cavity 11" " "-,000 11"-15,000 5/8" /8"-5000 * Bonnet (Right * 1 Bonnet (Left Intermediate Flange/Shear Bonnet/Shear Operating Piston/Shear ll components meet or exceed original equipment manufacturer's specifications 4 Int. Flange to Bonnet Lip Lip Seal, Operating Piston/Shear Wear Operating Pistion/Shear Table 7 Item Description ( 2 Required per Cavity 5/8"-,000 5/8"-15,000 3/4" /4"-, /4" /4"-2000 * Bonnet (Right ll components are designed, manufactured, and tested in accordance with applicable specifications. * Bonnet (Left Intermediate Flange/Shear Bonnet/Shear Operating Piston/Shear Int. Flange to Bonnet Lip Lip Seal, Operating Piston/Shear Wear Operating Pistion/Shear
9 CFI "CLSS U" BOP SHER RM BLOCKS ll Blowout Preventers' Components Conform to PI Specification, Latest Edition Block Upper Block Blade Lower Fig. 9 Bore Size and Working Size (1 Upper Subassembly (2 (3 Blade (4 (5 (6 (7 Lower Subassembly (8 * (9 * ( * 7 1/"-5000,,000 & 15,000 11"-5000 &, "-15, /8"-5000 &, /8"-15, /4" /4"-, /4"-, /4" /4" /4" /4"-7500 &, * Part of lower ram assembly, Item 7 Table 8 9
10 CFI "CLSS U" BOP PIPE RM BLOCKS ll Blowout Preventers' Components Conform to PI Specification, Latest Edition Pipe rams for Control Flow's "Class U" blowout preventers are available to fit any size pipe, drill collar or kelly. ll the ram assemblies listed, including blind rams, are suitable for H 2 S service. Control Flow's "Class U" ram assemblies are self-feeding, with a large reserve of packer rubber, assuring a long-lasting seal under all conditions. packer's rubber is locked into place and cannot be dislodged by well flow. Block rubber is bonded to steel plates which confine it to the sealing area. Block Fig. 7 1/" BORE - 5/8" BORE Pipe Size 7 1/"-Bore 3000, 5000,,000 & 15, "-Bore 3000, 5000, &, "-Bore 15, /8"-Bore 3000, 5000, &, /8"-Bore 15, Blind " " " " /" /8" /8" /2" " /2" /4" " /2" /4" " /8" " /8" /4" /8" " /8" /4" /4" /8" 5/8" 3/4" " 5/8" 20" Table 9
11 CFI "CLSS U" BOP PIPE RM BLOCKS ll Blowout Preventers' Components Conform to PI Specification, Latest Edition Pipe rams for Control Flow's "Class U" blowout preventers are available to fit any size pipe, drill collar or kelly. ll the ram assemblies listed, including blind rams, are suitable for H 2 S service. Control Flow's "Class U" ram assemblies are self-feeding, with a large reserve of packer rubber, assuring a long-lasting seal under all conditions. packer's rubber is locked into place and cannot be dislodged by well flow. rubber is bonded to steel plates which confine it to the sealing area. 3/4" BORE /4" BORE Block Block Fig. 11 Pipe Size 3/4"-Bore 3000, 5000,, /4"-Bore, /4"-Bore 3000, 5000, &, /4"-Bore /4"-Bore /4"-Bore 2000 & Blind " 1.315" 1.660" 1.900" /" 2 3/8" /8" /2" " /2" /4" " /2" /4" 6" /8" " /8" /4" 8 5/8" " /8" /4" /4" /8" /8" /4" " /8" " Table 11
Cameron International Corporation
Cameron International Corporation 2 Cameron International Corporation About this Catalog The purpose of this catalog is to serve as a quick reference for our customers. However, many of Cameron s products
More information2002 Replacement Parts Catalog
2002 Replacement Parts Catalog Please visit our website at http://www.camerondiv.com TRANSACT with CAMERON COMMERCE The Cameron Commerce function of TRANSACT offers an online, 24/7 purchasing tool for
More informationT BOP. prep. TC Cooper Cameron, Cameron Division
T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on
More informationBLOWOUT PREVENTERS. Invention Unique Design & Extraordinary Craftsmanship
BLOWOUT PREVENTERS TM Invention Unique Design & Extraordinary Craftsmanship 1 Table of Contents WOM s BOP Stack 4 WU BOP Major Features 6 WU BOP Specifications 7 WU BOP Dimensional Data (Single) 8 WU
More informationTL BOP. TL Custom Features:
TL BOP The Cameron TL BOP product line is the result of an evolution of Cameron s successful U, UII and T BOPs combined with custom features based on each customer s specific requirements. All TL BOPs
More informationD and DL Annular Blowout Preventers
D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force
More informationWORLDWIDE OILFIELD MACHINE
Table of Contents WOM s BOP Stack...4 WU BOP Major Features...6 WU BOP Specifications...7 WU BOP Dimensional Data (Single)...8 WU BOPDimensional Data (Double)...9 WU BOP Components...10 WU BOP Parts and
More informationU Blowout Preventer 13-5/8" 10,000 psi WP
Operation and Maintenance Manual U Blowout Preventer 13-5/8" 10,000 psi WP TC1075 All the information contained in this manual is the exclusive property of Cooper Cameron Corporation, Cameron Division.
More informationC BOP. TC Cooper Cameron, Cameron Division
C BOP The Cameron C BOP was designed as an emergency safety head for snubbing coiled tubing workover applications. The main function of the C BOP is to shear whatever is in the hole - from braided cable
More informationSUNNDA CORPORATION. Pressure Control Equipment. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Pressure Control Equipment Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
More informationFast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
More informationOilman Group API 6A PRODUCTS OILMAN GROUP LTD. Shanghai Houston
API 6A PRODUCTS OILMAN GROUP LTD 1 BOMCO Guanghan Drilling & Production Equipment Factory is a subsidiary of CNPC and provides the best API 6A & 16A products to esteemed customers all over the world. 2
More informationAPI 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG
1 API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG Sevilla No. 211 Fracc. Praderas de Elite Reynosa, Tamps Tel: (899)-263-49-82 www.marvic-int.com 2 Table
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationBoss Oilwell offers a complete line of API 16A BOPs, API 16C drilling manifold The ultimate solution for onshore & offshore BOPs
Boss Oilwell offers a complete line of API 16A BOPs, API 16C drilling manifold. -------The ultimate solution for onshore & offshore BOPs------- Boss Oilwell Products & Manufacturing INC(BOPM) specializes
More informationWAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
More informationMAGNUM GATE VALVES. Invention, Unique Design & Extraordinary Craftsmanship. WORLDWIDE OILFIELD MACHINE Est. 1980
TM MAGNUM GATE VALVES www.womusa.com Invention, Unique Design & Extraordinary Craftsmanship WORLDWIDE OILFIELD MACHINE Est. 980 Table of Contents Patented Dual-Seal Technology Magnum Gate Valve 2 Magnum
More informationINTEGRATED OEM ELASTOMER CATALOG
INTEGRATED OEM ISA SPHERICAL BOP INTEGRATED OEM PULSATION DAMPENERS INTEGRATED OEM ISA SPHERICAL PACKING ELEMENT INTEGRATED OEM RAM & ANNULAR SEAL KITS INTEGRATED OEM PULSATION DAMPENER DIAPHRAGMS K STYLE
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationMud Pump (Emsco Type) Diesel Engine
Houston: +1 713-893 - 5018 Beijing: +86 10 82898786 E-mail: info@cppipe.com Website: www.cppipe.com www.cppipe.cn CP Pipe & Equipment Corporation (CP) is a major US supplier of tubular products, petroleum
More informationRepair Manual MECHANICAL OIL VALVE
MECHANICAL OIL VALVE Repair Manual This Manual for Mechanical Oil Valves purchased before December 2017 INDEX Introduction... 1 Elastomer Materials... 2 Repair Kit Contents... 3 Disassembly... 4 Appendix
More informationThe Solution For The Valve Problems Plug Valves
www.3zvalve.com The Solution For The Valve Problems Plug Valves CONTENTS The Solution For The Valve Problems Plug Valves DBB Group Double Block & Bleed Valves 5 Soft Seated Group Sleeved Valves 23 Lined
More informationNEECO INDUSTRIES INC. INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY
INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY INTRODUCTION The NF-700 type gate valves provided by Neeco Industries are full-bore through conduit non-rising stem manually (w/ball screw) operated valves.
More informationBray/ VAAS Slurry Series Knife Gate Valve 760/762/765/766/767/768 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 760/762/765/766/767/768 Series Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 3 Commissioning 3 Cylinder-Operated
More informationFLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
More informationO RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI O -Rings PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Newman Elastomer Characteristics If you don t know the
More informationHYDRIL COMPANY LP / P.O. BOX / HOUSTON TEXAS PHONE: (281) / FAX: (281) / WEB:
Please contact Hydril Pressure Control Equipment for any assistance or questions concerning the information in this manual. All information in this manual is the exclusive property of Hydril Company LP.
More informationNOTICE CONCERNING COPYRIGHT RESTRICTIONS
NOTICE CONCERNING COPYRIGHT RESTRICTIONS This document may contain copyrighted materials. These materials have been made available for use in research, teaching, and private study, but may not be used
More informationSinclair Collins. Process Control Valves. For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi. Catalog SCV-100/USA April 2001
Sinclair Collins Process Control Valves For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi April 2001 The Diaphragm Operated Valves on the following pages are designed for directing, diverting
More informationTHROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
More informationModel T10 Triplex Power Pump
Weatherford s Model T10 is a single-acting triplex plunger pump rated at 10 HP in continuous duty service and up to 16 HP in intermittent duty. This versatile pump is offered with a variety of material
More informationSERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
More informationAPI 6A Gate Valves. an ARRAY Products Group company
API 6A Gate Valves valves for wellhead, manifold, distribution and fracture applications an ARRAY Products Group company TABLE OF CONTENTS Valve Trim Chart... 2 2,000 5,000 PSI Expanding or Slab Gate
More informationSPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS
SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS A variety of hydraulic pumps is offered for various liquid output pressure up to 33,500 psi (2311 bar). Sprague Products pumps service water, oil and most corrosive
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
More informationDESIGN ENGINEERS O-RING SIZE GUIDE
DESIGN ENGINEERS O-RING SIZE GUIDE INTRODUCTION: Substantially all O-ring manufacturers present their catalog data in the rotation of groupings or families of cross-sectional thickness first, then followed
More informationInternational Standard Valve, Inc. Slab and Expanding Gate Valves
International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a
More informationUPN. Rod and piston seal with energizing element UPN
Rod and piston seal with energizing element MATERIAL 1 1 Type Polyurethane Designation SEALPUR 93 Hardness 93 ShA 2 2 Type Nitril Rubber NBR Designation RUBSEAL 70 Hardness 70 ShA Pressure 400 bar FIELD
More informationSpecifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
More information!" #$%&' )*'+$,- + Wellhead systems with electrical submersible pumps are exported worldwide for water or oil extraction.
!" #$%&' )*'+$,- + Grayling. Mfg. Ltd., established in 1985, is a Canadian company specializing in the manufacture of wellhead equipment and accessories. Wellhead systems with electrical submersible pumps
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationKTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
More informationMcCONNEL DISCAERATOR Primary Cultivator. Parts Manual. Publication 648 April 2010 Part No Revised:
Publication 648 April 2010 Part No. 22674.48 Revised: 28.09.11 DISCAERATOR 3000 Primary Cultivator Parts Manual For best performance USE ONLY GENUINE SERVICE PARTS To be assured of the latest design improvements
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment
More informationABSTRACT. Annular BOP Diverter BOP Ram BOP. ERA Energy Service BOP PRODUCT CATAGLOG
ABSTRACT Annular BOP Diverter BOP Ram BOP ERA Energy Service BOP PRODUCT CATAGLOG Diverter We distribute diverters in compliance with API 16A, flange specifications in compliance with ASME B16.47 standard
More informationApplications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.
TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream
More informationFull Opening Swing CHECK VALVE - API 6D
Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationÍNDICE FICHAS TÉCNICAS
S BBES ÍNDICE S TÉCNICAS AFLAS-B85 EPDM-B85 EPDM-85-KTW EPDM-W85-FDA FPM-B85 FPM-B85-GD FPM-B85 FPM-B85-FDA HNB-B85 HNB-B85-GD HNB-B85-GD-LT NB-B85 NB-W85-FDA SILICONE-B85-FDA SILICONE-85-FDA 3 4 5 6 7
More informationDMRTM. SHAFT SEALS
TM www.daemar.com SHAFT SEALS For over 30 years Daemar Inc. has remained focused on partnering with our customers to deliver fluid sealing solutions that meet their business challenges. Whether the application
More informationProducts of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
More informationThe Right Seal for Every Application
The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both
More informationNEECO PRODUCT CATALOGUE (FLN/FLSN)
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY: The copy, reproduction, distribution, publication, display, modification, creation of derivative works, transmition, of any content on this catalog
More informationRAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
More informationDate of Issue: October 2017 Affected Publication: API Specification 16A, Specification for Drill-through Equipment, Fourth Edition, April 2017
Date of Issue: October 2017 Affected Publication: API Specification 16A, Specification for Drill-through Equipment, Fourth Edition, April 2017 Section 4.3.13, replace: Addendum 1 Sealing and porting of
More informationW E L L S I T E S E R V I C E S
WELL SITE SERVICES TABLE OF CONTENTS Frac Stack and Flow Control High Pressure Sand Removal System...FSFC-1a-d SPS Type 7 Manual and Hydraulic Frac Valve...FSFC-2a-b Frac Stacks...FSFC-3 High Pressure
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationO RINGS FDA AND USP CLASS VI
O RINGS FDA AND USP CLASS VI PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Elastomer Characteristics If you don t know the size or number of the O -Ring, you will need to determine
More informationHEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
More informationPatented Dual-Seal Technology...4
Table of Contents Patented Dual-Seal Technology...4 Magnum Gate Valve Magnum Gate Valve Unique Feature...5 Magnum Gate Valve Components...6 Magnum Gate Valve Specifications...7 Gate Valve Standard Trims...8
More informationMcCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL. The High Performance Company
McCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL The High Performance Company Table of Contents Safety Information - Definition of Terms... 1 Introduction... 1 Installation...
More informationMALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
More informationFlowline Products and Services World Proven Chiksan and Weco Equipment.
Flowline Products and Services World Proven hiksan and Weco Equipment http://www.fmctechnologies.com Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design
More informationCLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
More informationThis document downloaded from vulcanhammer.net vulcanhammer.info Chet Aero Marine
This document downloaded from vulcanhammer.net vulcanhammer.info Chet Aero Marine Don t forget to visit our companion site http://www.vulcanhammer.org Use subject to the terms and conditions of the respective
More informationGATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
More informationLB-04 HAMER LINE BLIND VALVES
LB-04 HAMER LINE BLIND VALVES INTRODUCTION AND TABLE OF CONTENTS Line Blinding: An Introduction Line blinding is the use of a solid flat plate to obtain absolute shutoff of flow. Whether used with liquids,
More informationF low L ine 72/73 Wafer & Lug Style Sizes 2-24
F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a
More informationHydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas.
2010 TECHNICAL CATALOG FROM CONCEPT TO PERFORMANCE... KEPNER VALVES DELIVER ZERO LEAKAGE CONTROL! Hydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas. Kepner Products
More informationDelayed Coking. Isolation Valve. Live Loaded Metal Seats. Fully Bi-Directional Flow Control. Double Block and Purge. In-Line Serviceable
Delayed Coking Isolation Valve Live Loaded Metal Seats Fully Bi-Directional Flow Control Double Block and Purge In-Line Serviceable DeltaValve The Value of a Trusted Partner DeltaValve s years of experience
More informationValve Solutions for the Bulk Material Industry
Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical
More informationPetroPi Industries Ltd. Wellhead
PetroPi Industries Ltd. Wellhead Table of Content Company Overview... 3 Company Strength... 3 Wellhead Engineering Design... 4 Conventional Sweet Flowing Wellhead... 4 Conventional Sour Flowing Wellhead...
More information(Interchangeable with Demco Model DM Gate Valve)
DM GATE VALVE (Interchangeable with Demco Model DM Gate Valve) The DM Gate Valve, are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water
More informationINSTALLATION, OPERATION AND MAINTENANCE MANUAL AOP SERIES D TRUNNION BALL VALVE, 2 FP 6 RP
INSTALLATION, OPERATION AND MAINTENANCE MANUAL AOP SERIES D TRUNNION BALL VALVE, 2 FP 6 RP CONTENTS 1. Parts list... 2 2. Description.. 10 3. Safety information s. 10 4. Installation and storing 10 5.
More informationContact us at: Lowery Well Heads tel: 918/ or 405/ fax: 918/
Lowery Well Heads History Lowery Well Heads was established in 1979 in Tulsa, Oklahoma by the Lowery family. Over the past 40 years the company grew to be a significant regional supplier of Tubing Heads,
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
More informationD I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationPRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
More informationD I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
More informationSpecifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 1 0 / 5 2 0-1 FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. plugs for use
More informationCasing Scraper. Service Equipment. Features
Casing Scraper The Casing Scraper is a spring type, mechanical casing scraper, featuring a large by-pass area between the blades to allow circulation of debris. The body is constructed of the highest quality
More informationBray/Mckannalok Butterfly Valve Series 40/41/42/43/44/45 Installation Manual Technical Bulletin No Date: May 2004/Page 1 of 6
Date: May 2004/Page 1 of 6 Bray/McCannalok Butterfly Valves Installation and Maintenance Instructions ANSI Classes 150 and 300 - Sizes 2-1/2 through 24 ANSI Classes 600 - Sizes 3 through 16 Bidirectional
More informationCAMERON T31MAX High-efficiency Fully Welded Ball Valve
CAMERON T31MAX High-efficiency Fully Welded Ball Valve CAMERON T31MAX High-efficiency Fully Welded Ball Valve As one of the most trusted valves in the petroleum industry, the CAMERON T31MAX provides the
More informationN-Line Valves. Severe Service Control Chokes
Severe Service Control Chokes Introduction continues to provide the highest levels of quality and value to oil and gas producers throughout the world. We manufacture severe service control chokes, engineered
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationDOV VALVE. fire-safe The DOV valve is inherently fire-safe and has been tested and passed the latest ISO and API 607 requirements.
DOV Valve INTRODUCTION The Double Offset Valve (DOV) is an advanced design that incorporates the positive features of ball, gate, plug and high performance valves. The DOV valve is a quarter turn, mechanically
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
More informationXFPES provides a whole range of after sales services including installation, maintenance, remanufacturing, supply and Management of spare parts.
About us XFPES Provides a complete range of equipment, engineered, designed and manufactured for the oil & gas industry including wellheads, X-mas trees, BOP, choke, manifolds, union, high-pressure movable
More informationFRP Ball Valves INSTALLATION & MAINTENANCE MANUAL
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL FRP BALL VALVES TABLE OF CONTENTS MAINTENANCE AND INSTALLATION INSTRUCTIONS 1. 2. 2.1 2.2 2.3 2.4 GENERAL...Page 1 HANDLING...1 Receiving and Storing...1
More informationP95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More information