F R O N T G A T E Holiday Collection 7.5 NOVA SCOTIA TREE W/FLIP STAND (61647)
|
|
- Camron Marsh
- 5 years ago
- Views:
Transcription
1 F R O N T G A T E Holiday Collection 7.5 NOVA SCOTIA TREE W/FLIP STAND (61647) ASSEMBLY INSTRUCTIONS (2 SECTIONS WITH 2 EXTENSION CORDS) PLEASE READ INSTRUCTIONS BEFORE ASSEMBLYING YOUR TREE Your 7.5 Nova Scotia Tree w/flip Stand should contain the following: 1 Tree stand (already attached) Replacement bulbs and fuses If any piece is missing please contact a Frontgate 2 Tree sections labeled A, B 1 Remote control Product Specialist 1 Power strip 2 Storage Bags HOW TO ASSEMBLE AND SHAPE YOUR TREE: 1. BEFORE STARTING TO ASSEMBLE YOUR TREE, CHOOSE A LOCATION NEAR AN 110V ELECTRICAL WALL OUTLET FOR THE PRELIT TREE. 2. LIFT THE CARTON FLAT INTO A STANDING, UPRIGHT POSITION WITH THE TREE STAND FLAT TO THE FLOOR. 3. THE SECTIONS OF THE TREE ARE MARKED A AND B. SECTION A IS THE BOTTOM; SECTION B IS THE TOP. SECTION A IS ALREADY ATTACHED TO THE FLIP STAND AND SHOULD NEVER BE REMOVED FROM THE STAND. 4. REMOVE SECTION B AND PLACE TO THE SIDE. BEFORE REMOVING SECTION A, ENSURE THAT YOU HAVE CREATED A SAFE DISPLAY LOCATION BY MOVING ANY FRAGILE ITEMS AND FURNITURE THAT YOUR TREE MAY HIT DURING THE FLIPPING PROCESS.
2 5. USE THE GREEN HANDLE AT THE TOP OF THE SECTION A AND PLACE YOUR FOOT ONTO THE FOOTREST TO TILT THE TREE BACK AND WHEEL THE TREE TO YOUR DISPLAY LOCATION. (FOOTREST) 6. LOCK THE TREE STAND WHEELS BY PRESSING DOWN ON THE TWO LOCKING TABS LOCATED AT THE FRONT OF THE TREE STAND. 7. REMOVE SECTION A TREE STORAGE BAG BY UNBUCKLING THE CINCH STRAPS ON THE SIDES AND UNFASTEN THE VELCRO. REMOVE THE SECTION B TREE BAG BY UNZIPPING THE BAG. 8. THE FLIP TREE WILL REQUIRE ONE OR TWO PEOPLE TO FLIP INTO POSITION. ANYONE NOT ASSISTING SHOULD BE KEPT AT A SAFE DISTANCE WHEN FLIPPING OR UNFLIPPING THE TREE. YOUNG CHILDREN SHOULD NOT ASSIST IN THIS PROCESS. 9. PLACE YOUR FOOT ON THE FOOTREST AND PULL THE SECTION A PORTION OF THE TREE IN THE DIRECTION SHOWN BY THE INDICATOR. (TOWARDS YOU AND DOWN THE CENTER OF THE FOOT PEDAL)
3 10. ONCE YOUR TREE HAS BEEN FLIPPED INTO THE UPRIGHT POSTION, INSERT THE TOP ( SECTION B ) INTO THE LOWER ( SECTION A ) TREE POLE. IF IT IS TOO DIFFICULT FOR YOU TO INSERT THE TOP SECTION WHILE THE TREE IS IN THE FULL UPRIGHT POSITION YOU MAY TILT THE TREE SLIGHTLY FOR BETTER ACCESS. 11. BUCKLE THE SAFETY STRAP AT THE BOTTOM OF THE TREE: 12. LOCATE THE TWO EXTENSION CORDS FROM SECTIONS A AND B AND PLUG INTO THE POWER STRIP PROVIDED.
4 7.5 NOVA SCOTIA TREE W/FLIP STAND:
5 BULBS AND FUSES: Fuses: The fuses are designed to prevent a short circuit or overheating that could lead to damage to the lights. The most common cause for a blown fuse is a power surge. Each cord string of Christmas tree lights has a fuse housed in the plug. When a fuse blows, the lights will simply stop working. Whenever an entire strand (or in some cases the entire tree) ceases to light, check the fuses before you try tightening or replacing the light bulbs. To Replace a Fuse: 1. Unplug the Christmas lights. *****Make sure the light string is unplugged from the wall and any other light strings before you start working on it. 2. Slid open the fuse box on your Christmas tree light string to confirm that the fuse is blown. You can see the fuse box clearly marked on the light string plug. Slide the top of the fuse box off with pressure from your thumb. If you cannot move it with your thumb, use a flat-head screwdriver to gently push the door open. 3. Examine the fuse to see if it is blown. A blown fuse will have a black residue evident inside the glass chamber. If there is no black residue, the blown fuse is in a different string. 4. Pop out the fuse by gently placing a small flat-head screwdriver under the fuse and apply gentle pressure upwards. 5. Place the new fuse over the area where it will be installed. Press down gently over top of both contact areas with two fingers until the fuse pops into place. *****Do not apply pressure to the glass part of the fuse when removing it or putting the new one in. Apply all pressure to the metal contacts. Complete by sliding close the fuse door.
6 To Replace Bulbs: 1. Unplug the Christmas lights. *****Make sure the light string is unplugged from the wall and any other light strings before you start working on it. 2. Remove each of the blown-out Christmas light bulbs. Use your thumb and index finger to delicately put pressure on each of the broken light's plastic jacket, to remove the bulb(s) from the bulb base. (Bulb Base) 3. Make sure the two copper wires are completely aligned with the bulb's base and the copper contact points inside the base. Now, insert the replacement bulb into the old bulb's socket.
7 REMOTE CONTROL INSTRUCTIONS: THE REMOTE CONTROL INCLUDED WITH THIS TREE CONSISTS OF A TRANSMITTER (FIGURE A) AND A RECEIVER (FIGURE B): FIGURE A FIGURE B THE RECIEVER IS TO BE PLUGGED INTO A GROUNDED**** ELECTRICAL OUTLET. ****(If you do not know or are unsure as to whether the intended outlet is grounded or not, please contact an electrician immediately to test and upgrade the outlet if needed.) PLUG THE TREE CORDS INTO THE POWER STRIP PROVIDED. LASTLY, PLUG THE POWER STRIP INTO THE REMOTE RECEIVER AND DEPRESS THE RED SWITCH TO THE ON POSITION ON THE POWER STRIP.
8 TO OPERATE THE REMOTE CONTROL, SIMPLY PRESS THE ON BUTTON TO TURN ON THE LIGHTS AND THE OFF BUTTON TO TURN OFF THE LIGHTS. TO REPLACE REMOTE CONTROL BATTERY: BATTERY SPECS: 12 VOLT, A23 SLIDE OPEN THE BATTERY COMPARTMENT DOOR ON THE BACK OF THE REMOTE TRANSMITTER REMOVE THE 12 VOLT, TYPE A23 BATTERY AND REPLACE WITH NEW BATTERY SLIDE CLOSE THE BATTERY COMPARTMENT DOOR
9 STORAGE 1. UNPLUG ALL CORDING 2. REMOVE SECTION B TOP SECTION AND PLACE INTO THE STORAGE BAG PROVIDED. 3. ENSURE THAT THE WHEELS ARE IN THE LOCKED POSITION AND UNBUCKLE THE SAFETY STRAP. 4. WITH YOUR FOOT ON THE FOOTREST, PULL SECTION A UP AND AWAY FROM THE FOOT PEDAL AND UNFLIP THE TREE. 5. PLACE THE SECTION A STORAGE BAG OVER THE TOP OF TREE AND MAKE SURE THE VELCRO IS ALIGNED WITH THE CENTER OF THE FOOTREST. 6. GENTLY PULL THE BAG OVER THE TREE UNTIL THE BAG IS ALMOST TOUCHING THE FLOOR AND RE-FASTEN THE BAG. 7. FASTEN THE CINCH STRAPS ON THE SIDES OF THE MAIN BAG. 8. UNLOCK THE WHEELS, GRAB THE GREEN HANDLE AND TILT THE TREE BACK TO WHEEL THE TREE TO YOUR SELECTED STORAGE LOCATION CAUTIONS AND WARNINGS o DO NOT LIFT SECTIONS OF THE TREE WITH THE BRANCHES. LIFT USING THE METAL POLE. o DO NOT STEP ON THE BRANCHES DURING THE ASSEMBLY PROCESS o DO NOT TWIST THE BULBS WHEN REPLACING AND ONLY USE THE SPARE BULBS PROVIDED IN THE CARTON AS REPLACEMENTS. PULL THE LAMP AND PLASTIC BASE STRAIGHT OUT OF THE LAMPHOLDER. o DO GRASP ELECTRICAL PLUGS AND REMOVE IT FROM THE RECEPTACLE OR OUTLET DEVICE. NEVER UNPLUG BY PULLING ON THE CORD. o DO NOT HANG ORNAMENTS OR OTHER OBJECTS FROM THE ELECTRICAL CORDS OR WIRES. o THIS PRODUCT EMPLOYS ELECTRICAL OVERLOAD PROTECTION (FUSES) INSIDE EACH PLUG. SPARE FUSES ARE PROVIDED IN THE CARTON. OUR PRODUCT DESIGN HAS NOT EXPERIENCED FUSE PROBLEMS; HOWEVER, IF A FUSE BLOWS THE PRODUCT SHOULD BE UNPLUGGED BEFORE REPLACING ANY FUSE. o WHEN A LIGHT SET FLICKERS OR GOES ON AND OFF, THE MOST COMMON PROBLEM IS A LOOSE FITTING BULB. CHECK TO MAKE SURE ALL BULBS ARE SEATED FIRMLY IN THE SOCKETS. o THE MOST COMMON PROBLEM WITH A LIGHT SET IS A BULB THAT NEEDS REPLACING. LOOSE OR DAMAGED BULBS CAN CAUSE AN ENTIRE STRING TO FAIL. A BURNED OUT BULB WILL NOT CAUSE THE STRING TO GO OUT IF IT IS NOT REMOVED. CARE AND MAINTENANCE STORE CARTON IN COOL AND DRY PLACE. DO NOT STORE THE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS 100 F. PLEASE CONTACT ONE OF OUR PRODUCT SPECIALISTS FOR ASSEMBLY ASSISTANCE OR QUESTIONS AT OR PS@FRONTGATE.COM. SPECIALISTS ARE AVAILABLE WEEK DAYS 8:00 AM TO 8:00 PM OR SATURDAY 9:30 AM TO 6:00 PM.
10 F R O N T G A T E Holiday Collection 9 NOVA SCOTIA TREE W/FLIP STAND (61649) ASSEMBLY INSTRUCTIONS (2 SECTIONS WITH 2 EXTENSION CORDS) PLEASE READ INSTRUCTIONS BEFORE ASSEMBLYING YOUR TREE Your 9 Nova Scotia Tree w/flip Stand should contain the following: 1 Tree stand (already attached) Replacement bulbs and fuses If any piece is missing please contact a Frontgate 2 Tree sections labeled A, B 1 Remote control Product Specialist 1 Power strip 2 Storage Bags HOW TO ASSEMBLE AND SHAPE YOUR TREE: 1. BEFORE STARTING TO ASSEMBLE YOUR TREE, CHOOSE A LOCATION NEAR AN 110V ELECTRICAL WALL OUTLET FOR THE PRELIT TREE. 2. LIFT THE CARTON FLAT INTO A STANDING, UPRIGHT POSITION WITH THE TREE STAND FLAT TO THE FLOOR. 3. THE SECTIONS OF THE TREE ARE MARKED A AND B. SECTION A IS THE BOTTOM; SECTION B IS THE TOP. SECTION A IS ALREADY ATTACHED TO THE FLIP STAND AND SHOULD NEVER BE REMOVED FROM THE STAND. 4. REMOVE SECTION B AND PLACE TO THE SIDE. BEFORE REMOVING SECTION A, ENSURE THAT YOU HAVE CREATED A SAFE DISPLAY LOCATION BY MOVING ANY FRAGILE ITEMS AND FURNITURE THAT YOUR TREE MAY HIT DURING THE FLIPPING PROCESS.
11 5. USE THE GREEN HANDLE AT THE TOP OF THE SECTION A AND PLACE YOUR FOOT ONTO THE FOOTREST TO TILT THE TREE BACK AND WHEEL THE TREE TO YOUR DISPLAY LOCATION. (FOOTREST) 6. LOCK THE TREE STAND WHEELS BY PRESSING DOWN ON THE TWO LOCKING TABS LOCATED AT THE FRONT OF THE TREE STAND. 7. REMOVE SECTION A TREE STORAGE BAG BY UNBUCKLING THE CINCH STRAPS ON THE SIDES AND UNFASTEN THE VELCRO. REMOVE THE SECTION B TREE BAG BY UNZIPPING THE BAG. 8. THE FLIP TREE WILL REQUIRE ONE OR TWO PEOPLE TO FLIP INTO POSITION. ANYONE NOT ASSISTING SHOULD BE KEPT AT A SAFE DISTANCE WHEN FLIPPING OR UNFLIPPING THE TREE. YOUNG CHILDREN SHOULD NOT ASSIST IN THIS PROCESS. 9. PLACE YOUR FOOT ON THE FOOTREST AND PULL THE SECTION A PORTION OF THE TREE IN THE DIRECTION SHOWN BY THE INDICATOR. (TOWARDS YOU AND DOWN THE CENTER OF THE FOOT PEDAL)
12 10. ONCE YOUR TREE HAS BEEN FLIPPED INTO THE UPRIGHT POSTION, INSERT THE TOP ( SECTION B ) INTO THE LOWER ( SECTION A ) TREE POLE. IF IT IS TOO DIFFICULT FOR YOU TO INSERT THE TOP SECTION WHILE THE TREE IS IN THE FULL UPRIGHT POSITION YOU MAY TILT THE TREE SLIGHTLY FOR BETTER ACCESS. 11. BUCKLE THE SAFETY STRAP AT THE BOTTOM OF THE TREE: 12. LOCATE THE TWO EXTENSION CORDS FROM SECTIONS A AND B AND PLUG INTO THE POWER STRIP PROVIDED.
13 9 NOVA SCOTIA TREE W/FLIP STAND:
14 BULBS AND FUSES: Fuses: The fuses are designed to prevent a short circuit or overheating that could lead to damage to the lights. The most common cause for a blown fuse is a power surge. Each cord string of Christmas tree lights has a fuse housed in the plug. When a fuse blows, the lights will simply stop working. Whenever an entire strand (or in some cases the entire tree) ceases to light, check the fuses before you try tightening or replacing the light bulbs. To Replace a Fuse: 1. Unplug the Christmas lights. *****Make sure the light string is unplugged from the wall and any other light strings before you start working on it. 2. Slid open the fuse box on your Christmas tree light string to confirm that the fuse is blown. You can see the fuse box clearly marked on the light string plug. Slide the top of the fuse box off with pressure from your thumb. If you cannot move it with your thumb, use a flat-head screwdriver to gently push the door open. 3. Examine the fuse to see if it is blown. A blown fuse will have a black residue evident inside the glass chamber. If there is no black residue, the blown fuse is in a different string. 4. Pop out the fuse by gently placing a small flat-head screwdriver under the fuse and apply gentle pressure upwards. 5. Place the new fuse over the area where it will be installed. Press down gently over top of both contact areas with two fingers until the fuse pops into place. *****Do not apply pressure to the glass part of the fuse when removing it or putting the new one in. Apply all pressure to the metal contacts. Complete by sliding close the fuse door.
15 To Replace Bulbs: 1. Unplug the Christmas lights. *****Make sure the light string is unplugged from the wall and any other light strings before you start working on it. 2. Remove each of the blown-out Christmas light bulbs. Use your thumb and index finger to delicately put pressure on each of the broken light's plastic jacket, to remove the bulb(s) from the bulb base. (Bulb Base) 3. Make sure the two copper wires are completely aligned with the bulb's base and the copper contact points inside the base. Now, insert the replacement bulb into the old bulb's socket.
16 REMOTE CONTROL INSTRUCTIONS: THE REMOTE CONTROL INCLUDED WITH THIS TREE CONSISTS OF A TRANSMITTER (FIGURE A) AND A RECEIVER (FIGURE B): FIGURE A FIGURE B THE RECIEVER IS TO BE PLUGGED INTO A GROUNDED**** ELECTRICAL OUTLET. ****(If you do not know or are unsure as to whether the intended outlet is grounded or not, please contact an electrician immediately to test and upgrade the outlet if needed.) PLUG THE TREE CORDS INTO THE POWER STRIP PROVIDED. LASTLY, PLUG THE POWER STRIP INTO THE REMOTE RECEIVER AND DEPRESS THE RED SWITCH TO THE ON POSITION ON THE POWER STRIP.
17 TO OPERATE THE REMOTE CONTROL, SIMPLY PRESS THE ON BUTTON TO TURN ON THE LIGHTS AND THE OFF BUTTON TO TURN OFF THE LIGHTS. TO REPLACE REMOTE CONTROL BATTERY: BATTERY SPECS: 12 VOLT, A23 SLIDE OPEN THE BATTERY COMPARTMENT DOOR ON THE BACK OF THE REMOTE TRANSMITTER REMOVE THE 12 VOLT, TYPE A23 BATTERY AND REPLACE WITH NEW BATTERY SLIDE CLOSE THE BATTERY COMPARTMENT DOOR
18 STORAGE 1. UNPLUG ALL CORDING 2. REMOVE SECTION B TOP SECTION AND PLACE INTO THE STORAGE BAG PROVIDED. 3. ENSURE THAT THE WHEELS ARE IN THE LOCKED POSITION AND UNBUCKLE THE SAFETY STRAP. 4. WITH YOUR FOOT ON THE FOOTREST, PULL SECTION A UP AND AWAY FROM THE FOOT PEDAL AND UNFLIP THE TREE. 5. PLACE THE SECTION A STORAGE BAG OVER THE TOP OF TREE AND MAKE SURE THE VELCRO IS ALIGNED WITH THE CENTER OF THE FOOTREST. 6. GENTLY PULL THE BAG OVER THE TREE UNTIL THE BAG IS ALMOST TOUCHING THE FLOOR AND RE-FASTEN THE BAG. 7. FASTEN THE CINCH STRAPS ON THE SIDES OF THE MAIN BAG. 8. UNLOCK THE WHEELS, GRAB THE GREEN HANDLE AND TILT THE TREE BACK TO WHEEL THE TREE TO YOUR SELECTED STORAGE LOCATION CAUTIONS AND WARNINGS o DO NOT LIFT SECTIONS OF THE TREE WITH THE BRANCHES. LIFT USING THE METAL POLE. o DO NOT STEP ON THE BRANCHES DURING THE ASSEMBLY PROCESS o DO NOT TWIST THE BULBS WHEN REPLACING AND ONLY USE THE SPARE BULBS PROVIDED IN THE CARTON AS REPLACEMENTS. PULL THE LAMP AND PLASTIC BASE STRAIGHT OUT OF THE LAMPHOLDER. o DO GRASP ELECTRICAL PLUGS AND REMOVE IT FROM THE RECEPTACLE OR OUTLET DEVICE. NEVER UNPLUG BY PULLING ON THE CORD. o DO NOT HANG ORNAMENTS OR OTHER OBJECTS FROM THE ELECTRICAL CORDS OR WIRES. o THIS PRODUCT EMPLOYS ELECTRICAL OVERLOAD PROTECTION (FUSES) INSIDE EACH PLUG. SPARE FUSES ARE PROVIDED IN THE CARTON. OUR PRODUCT DESIGN HAS NOT EXPERIENCED FUSE PROBLEMS; HOWEVER, IF A FUSE BLOWS THE PRODUCT SHOULD BE UNPLUGGED BEFORE REPLACING ANY FUSE. o WHEN A LIGHT SET FLICKERS OR GOES ON AND OFF, THE MOST COMMON PROBLEM IS A LOOSE FITTING BULB. CHECK TO MAKE SURE ALL BULBS ARE SEATED FIRMLY IN THE SOCKETS. o THE MOST COMMON PROBLEM WITH A LIGHT SET IS A BULB THAT NEEDS REPLACING. LOOSE OR DAMAGED BULBS CAN CAUSE AN ENTIRE STRING TO FAIL. A BURNED OUT BULB WILL NOT CAUSE THE STRING TO GO OUT IF IT IS NOT REMOVED. CARE AND MAINTENANCE STORE CARTON IN COOL AND DRY PLACE. DO NOT STORE THE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS 100 F. PLEASE CONTACT ONE OF OUR PRODUCT SPECIALISTS FOR ASSEMBLY ASSISTANCE OR QUESTIONS AT OR PS@FRONTGATE.COM. SPECIALISTS ARE AVAILABLE WEEK DAYS 8:00 AM TO 8:00 PM OR SATURDAY 9:30 AM TO 6:00 PM.
I1 7.5 Pre-Lit Clear Christmas Tree
I1 7.5 Pre-Lit Clear Christmas Tree 62432-13 INSTRUCTION MANUAL Thank you for purchasing this Pre-lighted Tree. This tree assembles in minutes and is decorated with UL listed miniature light sets. Please
More informationft. ft Signature Balsam Fir Tree ITEM Item 68607
7.5 7.5 ft. ft Signature Balsam Fir Tree ITEM Item 68607 PARTS LIST A. BOTTOM B. MIDDLE C. TOP D. TREE STAND NUMBER OF PERSONS RECOMMENDED FOR ASSEMBLY: 2 SKU 68607 7.5 Signature Balsam Fir 2114 TIPS STANDARD
More information7.5 FT PRE-LIT ENGLEWOOD PINE TREE
ITEM #0243778 7.5 FT PRE-LIT ENGLEWOOD PINE TREE Holiday Living & Design is a registered trademark of LF, LLC. All Rights Reserved. MODEL #W14L030 Español p. 11 ATTACH YOUR RECEIPT HERE Serial Number Purchase
More informationSylvania 7.5 Pre-Lit Lindberg Pine Tree 500 Clear Incandescent Lights-One Plug Tree Tree ID #C15, Item # V
Sylvania 7.5 Pre-Lit Lindberg Pine Tree 500 Clear Incandescent Lights-One Plug Tree Tree ID #C15, Item # V67658-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated with
More informationSylvania 9 Color Changing One Plug Tree Tree ID # T5, Item # V
Sylvania 9 Color Changing One Plug Tree Tree ID # T5, Item # V66354-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated with 600 LED lights. This tree has 8 lighting
More informationATTACH YOUR RECEIPT HERE ITEM # FT. PRE-LIT DOUGLAS FIR TREE. MODEL #DF-75C85 Español p. 8
ITEM #0776 7. FT. PRE-LIT DOUGLAS FIR TREE MODEL #DF-7C8 Español p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our
More informationASSEMBLY INSTRUCTIONS
6.5' McKinley Pine ASSEMBLY INSTRUCTIONS MODEL NO: U11G681A-024-01 (WL-018) PRODUCT CODE: 140-034066-910 CAUTION: Carefully Read Instructions and Procedures for Safe Operation Receipt of Purchase: Questions,
More information5.5 FT PRE-LIT SERBIAN SPRUCE TREE
ITEM #0674086 Holiday Living & Design is a registered trademark of LF, LLC. All Rights Reserved. 5.5 FT PRE-LIT SERBIAN SPRUCE TREE MODEL #W14D0225 Español p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase
More informationThanks for shopping with Improvements! Halcott Lighted Corner Christmas Tree 7 Item #546528
Thanks for shopping with Improvements! Halcott Lighted Corner Christmas Tree 7 Item #546528 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 1 Tree Urn 1 Tree Section A 1 Tree Section
More information7.0 Aspen Pine SYLVANIA Power-Lit TM M5 Warm White LED Pre-Lighted Tree V
7.0 Aspen Pine SYLVANIA Power-Lit TM M5 Warm White LED Pre-Lighted Tree V68035-56 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Power-Lit TM Pre-lighted Tree. This tree assembles in minutes and
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
7.5 Swift Lock Ready Shape Tree (Patent Pending) Instructions IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND
More informationASSEMBLY INSTRUCTIONS PRODUCT CODE: CAUTION: Carefully Read Instructions and Procedures for Safe Operation. 7' Diamond Peak LED Tree
7' Diamond Peak LED Tree ASSEMBLY INSTRUCTIONS MODEL NO: U11G684A-024-01 (WL-019) PRODUCT CODE: 140-034067-090 CAUTION: Carefully Read Instructions and Procedures for Safe Operation. Receipt of Purchase:
More informationFOR INDOOR/SEASONAL USE ONLY
9' Warm White /Multi LED Color Changing One Plug Tree V66362-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More information7.5' LED Silver Glitter with Pinecones One Plug Tree V INSTRUCTION MANUAL
7.5' LED Silver Glitter with Pinecones One Plug Tree V70065-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More information9' Warm White /Multi LED Color Changing M5 One Plug tree V INSTRUCTION MANUAL
9' Warm White /Multi LED Color Changing M5 One Plug tree V64886-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More information6.5 FT PRE-LIT WALDEN PINE TREE MODEL #LWCP112003
Holiday Living & esign is a registered trademark of L, LL. ll rights reserved. R ITM #0349488 6.5 T PR-LIT WLN PIN TR MOL #LWP2003 rançais p. 6 TTH YOUR RIPT HR Serial Number Purchase ate Questions, problems,
More information7.5 Oregon Fir With SYLVANIA Multi Color Mini Lights and Multi Color G50 Soft Glow Lights Pre-Lighted Tree V69139 INSTRUCTION MANUAL
7.5 Oregon Fir With SYLVANIA Multi Color Mini Lights and Multi Color G50 Soft Glow Lights Pre-Lighted Tree V69139 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA pre-lighted tree. This tree assembles
More informationTREE ASSEMBLY INSTRUCTIONS
TREE ASSEMBLY INSTRUCTIONS The Oldest Family Name for Christmas Trees in America SAVE THESE INSTRUCTIONS! - 1 - Table of Contents 1. Important Safety Notes Page 3 2. Attention Page 4 3. Getting Started
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
5 Swift Lock Ready Shape Tree (Patent Pending) Instructions IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW
More informationITEM #75618 Sylvania Staylit 7.5 ft. Sherwood Pine Pre-lit Tree MODEL #V
Holiday Living is a registered trademark of LF, LLC. All Rights Reserved. ITM #7568 Sylvania Staylit 7.5 ft. Sherwood Pine Pre-lit Tree MODL #V672-67 PACKAG CONTNTS Part A B C D F Description Top tree
More information6.5 Multi Function C5 LED Pre-Lighted Tree Pre-Lighted Tree 96842
6.5 Multi Function C5 LED Pre-Lighted Tree Pre-Lighted Tree 96842 INSTRUCTION MANUAL Thank you for purchasing this Multi Function LED Pre-Lighted Tree. This tree assembles in minutes and is decorated with
More information4 FT PRE-LIT SCOTT PINE TREE MODEL #LWP112060
ITEM #0346449 4 FT PRE-LIT SOTT PINE TREE MODEL #LWP2060 Español p. 6 R Holiday Living & Design is a registered trademark of LF, LL. ll rights reserved. TTH YOUR REEIPT HERE Serial Number Purchase Date
More informationSylvania 7.5' Pre-Lit Troy Fir Tree LED Color Changing and Multi Function One Plug Tree Tree ID #T1, Item # V
Sylvania 7.5' Pre-Lit Troy Fir Tree LED Color Changing and Multi Function One Plug Tree Tree ID #T1, Item # V67656-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated
More informationASSEMBLY & USE INSTRUCTIONS
ASSEMBLY & USE INSTRUCTIONS SKU# 1001777085 7FT to 10FT LED Pre-Lit Rising Artificial Spruce Tree IMPORTANT SAFETY WARNINGS 1.Read these instructions before using this product. 2.Save these instructions
More informationASSEMBLY INSTRUCTIONS
GROW & STOW CHRISTMAS TREE IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
More information16" STAND FAN WITH REMOTE
OWNER S MANUAL 16" STAND FAN WITH REMOTE MODEL:FS40-8JR READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only. CAUTION Read rules for safe operation and instrucions carefully.
More information600DC WIRELESS SINGLE MOTOR VARIABLE SPEED CONTROLLER
600DC WIRELESS SINGLE MOTOR VARIABLE SPEED CONTROLLER READ CAREFULLY BEFORE AND WHILE INSTALLING NOTE FOR MOTORS LARGE THAN 1/3HP YOU CANNOT USE POWER AND GROUND FROM YOUR 7 PRONG TRUCK PLUG ALSO MANY
More informationASSEMBLY INSTRUCTIONS FOR TREE STAND
7.5' Warm White/Multi Sylvania LiteTunes LED One Plug Tree, #V67258-26 Thank you for purchasing this new Sylvania One Plug tree. This tree assembles with Quick Connect technology for a faster, easier,
More informationCorrect driving posture
Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. ( P. 22) Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily
More informationIMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
T1838 IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fisher-price.com.au Consumer Information WARNING Prevent serious injury or death from falls or sliding out: Always use the restraint system
More informationPARTS AND SERVICE MANUAL
PARTS AND SERVICE MANUAL FOR THE 23 INSERT FIREPLACE MODEL NUMBER: DFI2309 TABLE OF CONTENTS OPERATION PAGE 1 PARTS DRAWING PAGE 3 PARTS LIST PAGE 4 WIRING DIAGRAM PAGE 5 LIGHT BULB REPLACEMENT PAGE 6
More informationRiverside. Placid Cove Entertainment PIER Assembly Instructions. Pier Left & Right Item # THANK YOU FOR YOUR PURCHASE.
Riverside FURNITURE email: info@riverside-furniture.com Placid Cove Entertainment PIER Assembly Instructions Be sure to check all packing material carefully for small parts, which may have come loose inside
More informationCar Battery Charger Instructions for Use
BATTERY CHARGER 12Volt 4Amp FOR INDOOR USE ONLY Power Details: Input: 230-240Vac; 50Hz; 52W Output: 12V DC; 2.8A Maximum Charge Rate: 4A RMS Read these instructions before operating this car battery charger
More informationMODEL SCA Installation and Operation Manual Important:
MODEL SCA Installation and Operation Manual Important: This manual contains specific cautionary statements relative to worker safety. Read this manual thoroughly and follow as directed. It is impossible
More informationHP PSC 2410 Photosmart All In One Printer Printer Carriage Replacement
HP PSC 2410 Photosmart All In One Printer Printer Carriage Replacement With this guide you will remove the old printer carriage and replace it with a new one. Written By: Cody Long ifixit CC BY-NC-SA www.ifixit.com
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationhome ELITE CURVE CUSTOM CURVED RAIL STAIRLIFT Operator s Manual Keep this manual in a safe and readily accessible place for future reference.
home ELITE CURVE CUSTOM CURVED RAIL STAIRLIFT Operator s Manual Keep this manual in a safe and readily accessible place for future reference. REV. 23 January 2015 PRODUCT REGISTRATION FORM home Product
More informationMania EF1 user manual
Mania EF1 user manual Measurements are expressed in millimeters. 290 142 312 Ø13 250 2003 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced, in any form or
More informationCITY III IMPORTANT OWNER S MANUAL. Monday 9am 5pm Tuesday 9am 5pm Wednesday CLOSED Thursday 9am 5pm Friday 9am 5pm Saturday 9am 2pm Sunday CLOSED
CITY III OWNER S MANUAL Monday 9am 5pm Tuesday 9am 5pm Wednesday CLOSED Thursday 9am 5pm Friday 9am 5pm Saturday 9am 2pm Sunday CLOSED 16 1 IMPORTANT PLEASE READ THIS MANUAL BEFORE USING YOUR ELECTRIC
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationHealthy Care High Chair
Healthy Care High Chair Product features and decoration may vary from the photo above. Model Number: 79638, 79639, 79640, 79641, B2875 Please keep this instruction sheet for future reference, as it contains
More informationFord Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List:
2015-2017 Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List: LED Foglights/ Bezels 2 Flat head & Phillips screwdriver (if you ordered part#3600) Ratchet & Socket set OR Wiring harness
More informationDOOR LIMITS A) ENGAGE CHAIN/BELT CONNECTOR TO CARRIAGE CAUTION B) CLOSE TRAVEL LIMIT
20 6 DOOR LIMITS Severe injury or death can result if the door closing force is set too high. Never increase the door closing force above the minimum required to move the door. Never adjust force to compensate
More informationOreck Magnesium Series Service Manual. The Oreck Manufacturing Company
Oreck Magnesium Series Service Manual The Oreck Manufacturing Company 08/2012 10/2011 The Oreck Manufacturing Company Contents Covering all Magnesium Upright Models Including: LW100, LW125, LW1000, AND
More informationHow to remove and replace the Foonf/Fllo fabric
How to remove and replace the Foonf/Fllo fabric Remove Headrest Locate the Troubleshooting Tool behind the manual on the back of the car seat, as shown in Figure 1. Raise Headrest to highest position by
More informationRetrofit Steering Column
Retrofit Steering Column Installation Instructions for 1970-75 Camaro For Part # s: 1620860010, 1620860020, 1620860051, 1620869910, 1620869920, 1620869951, 1625860010, 1625860020, 1625860051, 1625869910,
More informationPorsche 911/996/997 Carrera Do-It-Yourself Convertible Top Hydraulic Cylinder Inspection, Removal and Shipping Instructions
Porsche 911/996/997 Carrera Do-It-Yourself Convertible Top Hydraulic Cylinder Inspection, Removal and Shipping Instructions Disclaimer: These instructions are intended as a guide. Cabriolet Hydraulics
More informationService Manual Mozart Fireplace
Service Manual Mozart Fireplace Model Numbers: CFP3913 REV PCN DATE 00 11637 Sep 23, 09 Dimplex North America Limited 1367 Industrial Road Cambridge ON Canada N1R 7G8 1-888-346-7539 www.dimplex.com In
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationINSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274
INSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274 PARTS CHECKLIST Tuffy Console #9 Left Front Mounting Bracket #10 Right Front Mounting Bracket #11 Electronics mounting bracket #12 Divider
More informationOperations and Service Manual. X30208 Load Bank
Operations and Service Manual Read all instructions before using the load bank Contents 1. Components... 3 Total Assembly... 3 2) Specifications... 4 a)... 4 3) Receiving... 5 4) Safety... 5 a) Ground
More informationSearch by illustration
Pictorial index Search by illustration 1 AUTO ACCESS SEAT 2 Maintenance Information regarding the AUTO ACCESS SEAT, including usage procedure Checking fuses and replacing the battery of the wireless remote
More informationALU-29CF Portable Light NSN:
ALU-29CF Portable Light NSN: 6520-01-446-4170 COMMAND l AIR OPERATION / MAINTENANCE MANUAL & PARTS LIST TABLE OF CONTENTS Introduction................................................................3 Purpose.............................................................3
More informationBrewer. FLEX Access. Installation & Operation Manual
Installation & Operation Manual Important Information...2 Safety Information...3 Component Identification...3 Specifications...4 Installation...5 Operation... 11 Table Adjustments...17 Maintenance...20
More information2005 and 09 Mustang install instructions Sequential / Chase Unit Partial Plug-N-Play Kit Meter4it Eng. Updated: 3/28/09
Updated: 3/28/09 Verify content of kit: 1- Unit with wiring harness 1- Red power wire with 15 amp fuse 1- Color instruction 2- Velcro for mounting 1-Driver taillight harness 1- Passenger taillight harness
More informationReplacing the Batteries in the Fortress LI 660
Replacing the Batteries in the Fortress LI 660 This FTS describes how to replace the batteries in Fortress LI 660 units. Batteries should be replaced by a qualified technician. If you have any questions
More informationBURLEY JOGGER. Owner s Instruction and Safety Manual. Burley Jogger Limited Warranty
Burley Jogger Limited Warranty Burley will repair or replace parts it determines to be defective as follows: fabric parts for one year and durable parts for five years. The owner of a Burley Jogger must
More informationMotorScrubber MS2000S/M/L Instruction Manual
MotorScrubber MS2000S/M/L Instruction Manual PLEASE READ ALL INSTRUCTIONS When using electric products, basic safety precautions should always be followed to reduce the risk of electric shock and personal
More informationDIGITAL TEMPERATURE CONTROL
Fridge / Freezer / Warmer with DIGITAL TEMPERATURE CONTROL MODEL MHD13F-DM SPECIFICATION DESIGNATION OF PARTS MODEL CAPACITY OUTER DIMENSIONS INPUT RATING ( or FREEZER) (WARMER) REFRIGERANT WEIGHT MHD13F-DM
More informationMacBook Pro 15" Core 2 Duo Models A1226 and A1260 Antenna Cables Replacement
MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Antenna Cables Replacement Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 25 INTRODUCTION Use this guide to replace your MacBook's
More informationNIGHT-LITE PRO II. Electrical System Troubleshooting Guide and Procedures
NIGHT-LITE PRO II Electrical System Troubleshooting Guide and Procedures Allmand Bros. Inc. PO Box 888 1502 W. 4 th Ave. Holdrege NE 68949 USA 308-995-4495 Phone 800-562-1373 Toll-Free www.allmand.com
More informationModel. Torque accuracy ±3% No load speed/ rpm Machine screw mm / in. Available Screw. Machine screw mm / in
After use Storage and maintenance: when the unit is to be stored for a long period, remove the power supply and bit, open the carbon brush cover and blow out any accumulated carbon brush dust with compressed
More informationAFFIX TM Booster Seat. Owner s Manual PD202326A 5/12
AFFIX TM Booster Seat Owner s Manual READ THIS MANUAL. Do not install or use this car seat until you read and understand the instructions in this manual. FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL PUMP SLEEVE INSTALLATION KIT 2001-2006 BMW E46 M3 Document# 19-0058 Customer Support: info@radiumauto.com 1. There are 2 common ways to relieve fuel pressure on the BMW.
More informationHave a Bright Day! Nicholas Harmon President, Verilux, Inc.
VD03 Dear Customer, Thank you for purchasing the Verilux Heritage Deluxe Natural Spectrum Desk Lamp. You have received a quality product, backed by a one-year limited warranty. As a Verilux customer, your
More informationPC-085 Use and Care Manual
PC-085 Use and Care Manual w w w. i n t e r h e a l t h. c o m Interactive Health, 2006 The Perfect Chair is a registered trademark of Interactive Health, Inc. No medical claims warranted or implied by
More informationXS400 Load Bank. Read all instructions before using the load bank. Contents
Read all instructions before using the load bank Contents 1) Components... 3 Total Assembly... 3 2) Specifications... 4 3) Receiving... 4 4) Safety... 5 a) Grounding cam... 6 b) Power connections... 6
More informationSPEED KEY After the fan has started, press to change fan speed in sequence of: Low - Medium - High. The corresponding indicator will illuminate.
SF-16W81 16 Wall-Mount Fan Version 1.0 2015 OWNER S MANUAL SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only. CAUTION Read Rules for Safe Operation and Instructions Carefully.
More informationOWNER S MANUAL MODEL # TGL-500 HITCH LIFT
OWNER S MANUAL MODEL # TGL-500 HITCH LIFT For Customer Service Call or Fax 1 (800) 87-LARIN 1 SPECIFICATIONS.. Max Capacity:.500 lbs. Motor Power: 12 VDC SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
More informationInstallation Instructions
ADFE-A Three-Wire Fluorescent Multi-way Architectural Dimmer SPECIFICATIONS Dimming slider On/Off switch Label slot Voltage...2VAC, Hz Maximum Load Rating... A Minimum Load Rating....33A Narrow Dimmer:
More informationTwo Seat Bicycle Trailer
Two Seat Bicycle Trailer User s Manual This manual contains safety, assembly, use and maintenance instructions. Read these instructions carefully before use and keep them for future reference. Your child
More informationLOW-VOLTAGE TRANSFORMER INSTALLATION GUIDE. Models: VTR-100SL-SS, VTR-150SL-SS, & VTR-300SL-SS
LOW-VOLTAGE TRANSFORMER INSTALLATION GUIDE Models: VTR-100SL-SS, VTR-150SL-SS, & VTR-300SL-SS ATTENTION: Please read this installation guide carefully to ensure safe and efficient operation of this Power
More informationInstallation Instructions
ADFM277-A Two-Wire Fluorescent Multi-way Architectural Dimmer Dimming slider On/Off switch Label slot SPECIFICATIONS Voltage...277VAC, Hz Maximum Load Rating... A Minimum Load Rating....33A Wide Dimmer:
More informationSoothe n Play. Model Number: B0771
Soothe n Play Bouncer Model Number: B0771 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool required for assembly: Phillips
More informationQPET, QPETXU Battery Chargers
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S QPET, QPETXU Battery Chargers INTRODUCTION: The QPET line of chargers are designed for general purpose deep cycle batteries. They are an electronically
More informationSubmersible Pond Pump with UV 800 Gallons Per Hour
ITEM # DDUV800 Submersible Pond Pump with UV 800 Gallons Per Hour REMINDER CALL 1-888-412-6001 BEFORE RETURNING TO STORE. PACKAGE CONTENTS Questions, problems, missing parts? Before returning to your retailer,
More informationTroubleshooting Guide: 355 Lights (24V)
Troubleshooting Guide: 355 Lights (24V) Contents Description Refer To: Troubleshooting - Troubleshooting Chart Adjustments / Repair Procedures Bulb Replacing the Bulb Fuse(s) Replacing the Fuse (Ceiling)
More informationMore Complex Circuit
Series and Parallel Circuits Circuits usually include three components. One is a source of voltage difference that can be provided by a battery or an electrical outlet. Another is one or more devices that
More informationRocket. Two Seat Bicycle Trailer. Model Number ACIS99ROCKTBLU
Rocket Two Seat Bicycle Trailer Model Number ACIS99ROCKTBLU User s Manual This manual contains safety, assembly, use and maintenance instructions. Read these instructions carefully before use and keep
More informationQSSE, QSSEX INDUSTRIAL Battery Chargers
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S QSSE, QSSEX INDUSTRIAL Battery Chargers INTRODUCTION The QSE line are electronically controlled float chargers. The batteries are brought
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationINSTALLATION & OWNER S MANUAL
Rev. E p. of 3 INSTALLATION & OWNER S MANUAL V446 Front Cab Kit and V446 Rear Cab Kit for RTV 40 INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave
More informationSnapshot LX10 USER MANUAL. OK on Dimmer Outdoor OK Sound Activated DMX512 Master/Slave 115V/230V Switch Replaceable Fuse User Serviceable Duty Cycle
LX10 Snapshot OK on Dimmer Outdoor OK Sound Activated DMX512 Master/Slave 115V/230V Switch Replaceable Fuse User Serviceable Duty Cycle USER MANUAL Chauvet, 3000 N 29 th Ct, Hollywood, FL 33020 U.S.A.
More informationInstruction Manual. Avoid injury or death - Read and understand this manual! Para instrucciones en Español, llamar al:
Instruction Manual Para instrucciones en Español, llamar al: 1-800-837-4044 www.centuryproducts.com PM-1663AB 6/01 Avoid injury or death - Read and understand this manual! TABLE OF CONTENTS Instruction
More informationInstallation/Operating Instructions
RETURNING UNITS Please contact your retail store for returns. WARRANTY This unit, when properly used will provide you with years of service. It is covered under a 3 year warranty (902210-400 Watt and 902230-1500W/240V
More informationEgo 01 Ego 02 Ego 03 Logo Projector user manual
Ego 01 Ego 02 Ego 03 Logo Projector user manual Measurements are expressed in millimeters. 324 305 150 248 2002 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced,
More informationUser Manual GRX- 950 and GRX- 950 Li
User Manual GRX- 950 and GRX- 950 Li Page 1 of 17 TABLE OF CONTENTS INTRODUCTION 3 BASIC SET- UP 4 TURNING ON YOUR GRX- 950 7 PRECAUTIONS 8 FREE WHEEL MODE 9 GENERAL BATTERY CARE 10 BATTERY INFORMATION
More informationHALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: &
HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: 5460600 & 5460595 OPERATING & MAINTENANCE INSTRUCTIONS GC0610 INTRODUCTION Thank you for purchasing this CLARKE Halogen Floodlight. Before attempting
More informationModel PM 50/20 Intensifier Press. Operation & Maintenance Instructions
Model PM 50/20 Intensifier Press Operation & Maintenance Instructions Revised 07/09/2007 1 1. CHARACTERISTICS Models PM 50/20 Intensifier Press Operation & Maintenance Instructions Approach - Power with
More informationMacBook Pro 15" Core 2 Duo Model A1211 Front Display Bezel Replacement
MacBook Pro 15" Core 2 Duo Model A1211 Front Display Bezel Replacement Written By: Ben Eisenman ifixit CC BY-NC-SA www.ifixit.com Page 1 of 25 INTRODUCTION Use this guide to replace a damaged front display
More informationHG-6 Owners Manual. Table of Contents. Assembly Instructions Use and Operation of Your PROSPOTfitness Product
HG-6 Owners Manual Table of Contents Assembly Instructions......2-17 Use and Operation of Your PROSPOTfitness Product...18-22 Periodic Maintenance of your PROSPOTfitness Product. 23 Parts List...24-25
More informationMANUAL VERSION FEBRUARY
MANUAL VERSION FEBRUARY 2008 MAINTENANCE AND TROUBLESHOOTING Quick Troubleshooting: WARNING For your safety and to reduce risk of damage to your game read the Important Safety Information in Chapter 1-2
More informationTHIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL. WELLS ENGINE UNIT 230 VOLT Product No. U905, U906, U907, U908
DENTAL, INC. TECHNICAL BULLETIN U807-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS
More informationSnapshot LX5 USER MANUAL. OK on Dimmer Outdoor OK Sound Activated DMX512 Master/Slave 115V/230V Switch Replaceable Fuse User Serviceable Duty Cycle
LX5 Snapshot OK on Dimmer Outdoor OK Sound Activated DMX512 Master/Slave 115V/230V Switch Replaceable Fuse User Serviceable Duty Cycle USER MANUAL Chauvet, 5200 NW 108th Avenue, Sunrise, FL 33351 U.S.A.
More informationInstallation Instructions Jeep CJ-7
Retrofit Steering Column Installation Instructions 1976-86 Jeep CJ-7 For Part # s 1520800010, 152800020, 1520800051 www.ididitinc.com 610 S. Maumee St., Tecumseh, MI 49286 (517) 424-0577 (517) 424-7293
More information2006 Chrysler Pacifica
HALOGEN HEADLAMP Fig. 15: Halogen Headlamp Unit 1 - HEADLAMP HIGH BEAM 2 - HEADLAMP LOW BEAM 1. Remove the headlamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - REMOVAL). 2. Disconnect
More information230V. Brewer. FLEX Access. Installation & Operation Manual
230V Brewer Installation & Operation Manual Important Information...2 Safety Information...3 Component Identification...3 Specifications...4 Power Cord Selection...5 Installation...6 Operation...12 Table
More information(H) TOUR VANTAGE STROLLER ASSEMBLY INSTRUCTIONS ADULT ASSEMBLY REQUIRED. Styles and colors may vary
TOUR VANTAGE STROLLER ASSEMBLY INSTRUCTIONS ADULT ASSEMBLY REQUIRED Styles and colors may vary IMPORTANT: Read all instructions before assembly and use of the stroller Keep the instructions for future
More informationALLEN GROUP INT L INC
ALLEN GROUP INT L INC 2-TIER GALA FOUNTAIN MODEL # FF29413 NOTE: The schematics in this manual are for assembly and operation illustration only. They may differ from the fountain s actual appearance. IF
More informationRaritan PX. Power Cord Installation Guide. Safety Guidelines. Safety Instructions
QS Rule Raritan PX Power Cord Installation Guide This installation guide explains how to install power cords on Raritan PX products that do not come with a factory installed power cord. This type of product,
More information