Addendum No. 4 Tender No Re: Toronto City Hall Building Envelope Improvements at 100 Queen Street West, Toronto.

Transcription

1 Michael Pacholok, Director Purchasing and Materials Management Division City Hall, 18 th Floor, West Tower 100 Queen Street West Toronto, Ontario M5H 2N2 Joanne Kehoe Manager Construction Services October 14, 2016 Reply to: Michael Porcarelli Tel: (416) Addendum No. 4 Tender No Via Website Posting: 25 Pages Re: Toronto City Hall Building Envelope Improvements at 100 Queen Street West, Toronto. Closing Date: 12:00 P.M. Noon (Local Time), October 20, 2016 (Revised) Please refer to the above Tender Call document in your possession and be advised of the following information: 1. Extension to the Closing Date The Closing Date has been extended from October 18 to October 20, Revised Documents and Additional Documents 1. Door Hardware Schedule (to compliment revised Drawing R28) 4 pages enclosed. 2. Hardware Cut Sheets (compliment revised Drawing R28) 15 pages enclosed. 3. Drawing R14 (revision 1) 1 page enclosed, dated September 30, Drawing R27 (revision 1) 1 page enclosed, dated August 5, Drawing R28 (revision 1) 1 page enclosed, dated August 5, Continued on next page 1 of 25

2 3. General Clarifications To Questions From Bidders Q1. Regarding the door schedule (R28), and Addendum 3, A18, no hardware schedule has been provided. We understand that all hardware is to be replaced. However, a listing of the hardware specifications would be beneficial to ensure that the proponents are bidding like for like. A1. Please refer to the attached Door Hardware Schedule, Hardware Cut Sheets, and revised Drawing R28. (1 page enclosed). Q2. Our understanding is that some of the existing doors are not thermally broken. Please confirm that thermally broken doors are not required. A2. Thermally broken doors are not required. Q3. Our understanding is that glass suppliers will not provide a warranty for GPW in a sealed unit. Please confirm that this is acceptable for those areas where fire rated glass is required. A3. Warranty for fire rated sealed GWP units is not required. Q4. Our understanding is that there are significant amounts of wiring in the council chamber existing window system. The wiring may have to be removed / reinstated to enable the window work to proceed. The location and extent of the wiring could not be readily determined through a visual inspection. It is therefore difficult to produce a reasonable budget for this scope of the work. Could a wiring diagram be provided showing the location of all wiring or preferably, could the relocation of the wiring (if required) be handled from the contingency? A4. An existing wiring diagram is not available. The location and extent of wiring can be determined from visual review of the interior of the Council Chamber (i.e., all devices such as security cameras, speakers, strobes, etc., that are secured to the interior window frame mullions are wired, so locations can be determined). Contractor is responsible to remove from the mullion, protect, support, and reinstate any wiring, lighting, fixtures or other objects that may interfere with the removal and replacement of the new windows. Refer to Section 4 Scope of Work Item 1.6. It is not intended to significantly alter/move any wiring from its current location. Continued on next page 2 of 25

3 Q5. Does the coating at the ring beam include the back (inside) face of the beam? A5. Yes. Q6. Many of the patches at the ring beam are expected to be too small for wet concrete (specified ready mix and bag mix). Is a polymeric modified patching mix acceptable? A6. Where the ring beam concrete repairs (Item C12- Council Chamber Post-Tensioned Ring Beam Concrete Repairs) are less than approximately 300mmx150mmx100mm (lxhxd) or where otherwise approved by the Consultant, poly modified mortar can be used. Provide proposed material for Consultant approval prior to application. Q7. It appears the soffits need to be removed to access the upper units at the grade level windows. Is a detail available showing the soffit construction? A7. There is no detail available, however, the aluminum soffit slats are hung from a wire-hung frame system, and are easily removable. Please note that the Deadline for Questions has passed. All other information regarding the call document is unchanged. All other terms and conditions remain the same. Should you have any questions regarding this addendum contact Michael Porcarelli, Corporate Buyer, at mporcar@toronto.ca. Please attach this addendum to your Request for Tender document and be governed accordingly. Bidders must acknowledge receipt of all addenda on the space provided on the Tender Call Cover Page as per the Process Terms and Conditions, Section 1, Item 8 - Addenda, of the Tender Call document. All other aspects of the Tender remain the same. Yours truly, Joanne Kehoe, Manager, Construction Services, Purchasing & Materials Management 3 of 25

4 HARDWARE SETS SET #2 Exit Only (Door with 2.5" Door Stile) 2 Pivot Set Rixson 2 Exit Device 2601 LD 630 Precision 2 Door Closer D-4551 Top Jamb 689 Precision 2 Overhead Stop Stanley 2 Door Sweeps W-19 x DW AL K.N Crowder 1 Set Astragal W-5 x DH AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 x Total Dor Opening Width AL K.N Crowder 2 Door Contact 1076 White Sentrol SET #3 Entry and Exit with Barrier Free Auto Door Operator - Card Reader In 2 Pivot Set Rixson 1 Set Flush Bolt GSH Gallery 1 Deadlatch 4920AN 628 Adams Rite 1 Thumb Turn Adams Rite 1 Mortise Cylinder By Owner 689 Stanley 1 Auto Door Operator Stanley Access Technology 689 Stanley 2 HC Push Buttons Stanley Access Technology 689 Stanley 1 Door Closer D-4551 Top Jamb 689 Stanley 2 Overhead Stop Stanley 1 Electric Strike ES-4 R Fail Safe 628 Stanley 2 Door Sweeps W-19 x DW AL K.N Crowder 1 Set Astragal W-5 x DH AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 x Total Dor Opening Width AL K.N Crowder 2 Door Contact 1076 White Sentrol 2 Door Push/Pulls Existing to be re-used 630 EX 1 Latch Guard Existing to be re-used (if needed) 630 EX 1 Card Reader Existing to be re-used SET #4 Entry and Exit 4 of 25

5 2 Pivot Set Rixson 1 Set Flush Bolt GSH Gallery 1 Deadlatch 4920AN 628 Adams Rite 1 Thumb Turn Adams Rite 1 Mortise Cylinder By Owner 689 Stanley 2 Door Closer D-4551 Top Jamb 689 Stanley 2 Overhead Stop Stanley 2 Door Sweeps W-19 x DW AL K.N Crowder 1 Set Astragal W-5 x DH AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 x Total Dor Opening Width AL K.N Crowder 2 Door Contact 1076 White Sentrol 2 Door Push/Pulls Existing to be re-used 630 EX 1 Latch Guard Existing to be re-used (if needed) 630 EX SET #5 Entry and Exit with Barrier Free Auto Door Operator - Card Reader In and Out Exit Devices are dogged down during business hours 2 Pivot Set Rixson 1 Exit Device Precision 1 Exit Device 2603 x NCA Precision 1 Rim Cylinder By Owner 689 Stanley 1 Auto Door Operator Stanley Access Technology 689 Stanley 2 HC Push Buttons Stanley Access Technology 689 Stanley 1 Door Closer D-4551 Top Jamb 689 Stanley 2 Overhead Stop Stanley 2 Door Sweeps W-19 x DW AL K.N Crowder 1 Set Astragal W-5 x DH AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 x Total Dor Opening Width AL K.N Crowder 2 Door Contact 1076 White Sentrol 1 Magnetic Lock DM Securitron 2 Door Pulls Existing to be re-used 630 EX 2 Card Reader Existing to be re-used 5 of 25

6 SET #6 Entry and Exit with Barrier Free Auto Door Operator Exit Devices are dogged down during business hours 2 Pivot Set Rixson 1 Exit Device Precision 1 Exit Device 2603 x NCA Precision 1 Rim Cylinder By Owner 689 Stanley 1 Auto Door Operator Stanley Access Technology 689 Stanley 2 HC Push Buttons Stanley Access Technology 689 Stanley 1 Door Closer D-4551 Top Jamb 689 Stanley 2 Overhead Stop Stanley 2 Door Sweeps W-19 x DW AL K.N Crowder 1 Set Astragal W-5 x DH AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 x Total Dor Opening Width AL K.N Crowder 2 Door Contact 1076 White Sentrol 2 Door Pulls Existing to be re-used 630 EX SET #7 Exit Only - Single Door 1 Pivot Set Rixson 1 Exit Device 2601 LD 630 Precision 1 Door Closer D-4551 Top Jamb 689 Stanley 1 Door Sweeps W-19 X DW AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 X Total Dor Opening Width AL K.N Crowder 1 Door Contact 1076 White Sentrol SET #8 Exit Devices are dogged down during business hours 2 Pivot Set Rixson 2 Door Pulls GSH Gallery 1 Exit Device Precision 1 Exit Device 2603 x NCA Precision 1 Rim Cylinder By Owner 689 Stanley 2 Door Closer D-4551 Top Jamb 689 Stanley 6 of 25

7 2 Overhead Stop Stanley 2 Door Sweeps W-19 x DW AL K.N Crowder 1 Set Astragal W-5 x DH AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 x Total Dor Opening Width AL K.N Crowder 2 Door Contact 1076 White Sentrol SET #9 Entry and Exit with Barrier Free Auto Door Operator - Card Reader In and Exit Button/HC PB Out Exit Devices are dogged down during business hours 2 Pivot Set Rixson 2 Door Pulls GSH Gallery 1 Exit Device Precision 1 Exit Device 2603 x NCA Precision 1 Rim Cylinder By Owner 689 Stanley 2 Auto Door Operator Stanley Access Technology 689 Stanley 2 HC Push Buttons Stanley Access Technology 689 Stanley 2 Overhead Stop Stanley 2 Door Sweeps W-19 x DW AL K.N Crowder 1 Set Astragal W-5 x DH AL K.N Crowder 1 Weatherstripping W-47 2 X DH, 1 X DW AL K.N Crowder 1 Threshold CT-46 x Total Dor Opening Width AL K.N Crowder 2 Door Contact 1076 White Sentrol 1 Magnetic Lock DM Securitron 1 Card Reader Card Reader by Security Contractor 1 Motion Sensor By Security Contractor 7 of 25

8 NARROW CONCEALED VERTICAL ROD EXIT DEVICES NARROW CONCEALED VERTICAL ROD EXIT DEVICES S519 (Not recommended for Wood Door Applications) Apex 2600 Series - Reversible Apex FL2600 Fire Exit Series - Reversible DOORS - For all types of metal single and double door applications. Available for 1-3/4" to 2-1/4" thick, up to 4'-0" wide by 10'-0" high openings. For thicker doors, consult factory. Furnished standard for 1-3/4" thick, 3'-0" wide by 6'-8" to 8'-0" high openings. FUNCTIONS - A Universal Exit Device. Add Trim for desired function. BASE MATERIAL - Side Filler and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. 628 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components. See Finish & Base Material chart on page 3. CHASSIS - Lock Stile Assembly - Investment Cast Steel, Zinc Dich-romated. TOP LATCHBOLT - Stainless Steel, Deadlocking, 3/4" throw. Note: All vertical rod lengths are based on /16 exit device horizontal centerline. TOP STRIKE - No. S519 Surface applied, Investment Cast Stainless Steel, Black Powder Coated. BOTTOM STRIKE - No. S460, Flush mounted, Steel, Black Powder Coated. DOGGING - 1/4" turn hex key dogging standard. NOT available on Fire Exit Hardware. TOUCHBAR HEIGHT /16" from floor standard. Specify required height if other than standard. UL LISTED - Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE Ratings see page 33. Conforms to UL10C and UBC 7-2. ANSI/BHMA - Devices are BHMA certified for ANSI 156.3, Grade 1. FINISHES - 605, 626, 612, 613, 625, 628, 630. For finish description see page 3. CYLINDERS - Rim Type for 03 function, 1-1/4" Long Mortise Type for 08 function. Cylinders are not furnished standard. Specify when required. For cylinder details see page 19. BOTTOM BOLT - Steel plated, independent action 5/8" throw, with adjustment range to suit 3/4" door undercut. CENTER CHASSIS - Steel plated, heavy wrought Steel Assembly with lock in place Top and Bottom Latch Adjustors. Adjustment is accessible through the door after installation. STILE WIDTH - See Stile Information on page 37. LESS BOTTOM ROD (LBR) OPTION - Specify suffix LBR (e.g. 2603LBR). See UL FIRE LABEL RATING Chart on page 33. Fire Rated Devices include FB277 Fire Bolt Assembly. For Fire Bolt Assembly image see page 35. S460 DEVICE OPTIONS Prefix Description Page DE Delayed Egress...24 ELR Electric Latch Retraction...21 FL Fire Exit Hardware...12 TDS Touchbar Monitoring Double Switch...29 TS Touchbar Monitoring Switch...29 WTDS Weatherized Touchbar Mon. Dbl. Switch...29 WTS Weatherized Touchbar Mon. Switch...29 To specify add Prefix to Device No. (e.g. TS2603) Suffix Description Page ALK Exit Alarm: battery operated...27 ALW Exit Alarm: remote power...27 BRL Braille Touchbar...35 CD Cylinder Dogging...19 DS Door Position Monitoring Switch...29 LBR Less Bottom Rod...12 LD Less Dogging...19 SEC Security Screws...3 SNB Sex Nut and Bolt...3 WALW Weatherized Exit Alarm: remote power...27 To specify add Prefix to Device No. (e.g. TS2603) 12 APEX 2000 SE 8 of 25

9 DEADLATCHES 4920AN HEAVY DUTY DEADLATCH (ANSI SIZE) DA AN Heavy Duty Deadlatch (ANSI Size) HOLLOW METAL WOOD GRADE 1 E AN Heavy Duty Deadlatch provides flexible traffic control and easy installation for wood or hollow metal doors. Function For hollow metal or wood doors prepared for hardware according to the specifications of the American National Standards Institute (ANSI), 4920AN Heavy Duty Deadlatches provide precise traffic control. A key-controlled bolt hold-back feature allows a door to free-swing part of the day and exit-only when the bolt is free to latch. This allows a locked entrance to be used as an exit by customers or visitors already in the building. Interchangeable, without door modification, with any MS1850SN Deadlock of same faceplate shape and backset. Replaces 4520 and 4720 ANSI Deadlatches. 1-3/4" minimum door thickness required. Operation Turn key or operate handle to retract spring-loaded Latchbolt. To hold bolt retracted, push it in and secure by reverse turn of key. Uses any standard mortise cylinder with MS dimensioned cam. Specifications BOLT HOLDBACK While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging. CYLINDER BACKSET 1-1/2" or 2-3/4" only. CASE Measures 7/8" x 5-13/16" x depth. Depth varies by backset (see table on back of page). Steel with corrosion-resistant plating. LATCHBOLT 5/8" x 1" x 5/8" throw. Solid brass. Handing is easily reversible using only a screwdriver. AUXILIARY LATCHPIN Stainless steel. Deadlocks latchbolt to prevent loiding or case-knife entry. FACEPLATE 1-1/4" x 8" armored flat faceplate can also be adjusted in the field for right or left beveled edge doors. STRIKES Stainless steel, US32D Satin finish (630) Strike furnished to ANSI preparation specifications for flat jamb. CYLINDER CAM 4920AN Heavy Duty Deadlatches are operable by any standard 1-5/32" diameter mortise cylinder with MS cam dimensioned as shown. Cylinders with MS cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information. Dim A.800" ±.005" 20.3mm ±.127mm.120" R 3.0mm.182" 4.6mm STRIKE FURNISHED FIELD REVERSIBLE LATCHBOLT OPTIONS Backset, strike, and finish must be specified when ordering. See 4900 Heavy Duty Deadlatch for aluminum stile door applications. STANDARD PACKAGE Individually boxed with faceplate, strike, and machine screws for mounting. Order cylinders, paddles, handles or lever operators separately. Shipping weight: 1-1/4 lbs. ARM-014-9/14 9 of Fax S. 51st Street, Ste 102 Phoenix, Arizona

10 DA AN HEAVY DUTY DEADLATCH (ANSI SIZE) DEADLATCHES All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Nominal, subject to tolerance extremes HOW BACKSET IS MEASURED: Jamb & Door Preparation Identical to MS1850SN Series (See also prep for 4591 paddle). CYLINDER A 5/8" 15.9mm C L STRIKE LC LATCH LC BACKSET 29/32" 23mm 1-1/4" 31.8mm FLAT 1-3/16" 30.2mm 2-1/8" 54mm C L 4-7/8" 123.8mm 1/4" 6.4mm BACKSET MEASURED AT CENTERLINE OF DOOR EDGE BEVEL 3-3/8" 85.7mm 8-1/64" 203.6mm 1-1/4" 31.8mm DIA. 15/16" 23.8mm BACKSET 1-1/2" 38.1mm A 2-9/64" 54.4mm 7/64" 2.8mm 7-11/16" 195mm 5-13/16" 147.6mm 1-7/16" 36.5mm 19/32" 15.1mm 3/8" 9.5mm 7-1/4" 184.2mm 8" 203.2mm 2-3/4" 69.9mm 3-25/64" 86.1mm ARMORED FACEPLATE 1-1/4" X 8" FLAT XXX Flat faceplate can be adjusted for right or left beveled edge doors. CYLINDER LC 1-1/4" 31.8mm 1-17/64" 32.1mm Latch Paddle & Cylinder Installation 1/4" 6.4mm SHOWN RH/LHR. BOLT IS REVERSIBLE FOR OPPOSITE HAND. LC 1-3/16" 30.2mm 3/8"* 9.5mm STRIKE PLATE LC LC LATCH FACE *STRIKE and Faceplate of ANSI dimensions must be positioned according to ANSI Spec. HOW TO ORDER 4920AN HEAVY DUTY DEADLATCH (ANSI SIZE) Specify quantity and the following information. Order related products separately. Product No. BACKSET HANDING STRIKE FACEPLATE FINISH 4920AN /2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized 5 2-3/4" 6 RH or LHR Strike 335 Black Anodized 628 Clear Anodized RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim Electric Strikes Lock mounting accessories and options. 4920AN Heavy Duty Deadlatches (ANSI Size) operable by any standard 1-5/32" diameter mortise cylinder with MS cam. Entry trim, paddles, handles and lever operators. Application sepecific. 10 of , Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

11 1 7/16" [36.5mm] 1 5/16" [33.3mm] 1" [25.4mm] 7/8" [22.2mm] LISTED 1/4" [6.4mm] 7/32" [5.6mm] CLEAR ANODIZED ALUMINUM AND VINYL CLEAR ANODIZED ALUMINUM AND NYLON BRUSH 3/16" [4.8mm] 2 1/2" [63.5mm] 1/8" [3.2mm] 1 3/4" [44.5mm] DOOR JAMB 3/16" [4.8mm] 1 3/4" [44.5mm] R C SECURITY ASTRAGAL PRIMED C.R. STEEL c/w SECURITY SLEEVE EXTRUDED ALUMINUM EXTRUDED ALUMINUM WITH PILE EXTRUDED ALUMINUM WITH SILICONE 1 3/4" [44.5mm] 1/8" [3.2mm] 1" [25.4mm] 7/32" [5.6mm] (Optional: Neoprene Seal) C.R. STEEL WITH CONDITIONED EDGES AS ABOVE, PRIMED FINISH STAINLESS STEEL, SEE PG. 20 EXTRUDED ALUMINUM WITH PILE EXTRUDED ALUMINUM WITH SILICONE 36 A PRODUCT OF K. N. CROWDER MFG. INC. 11 of 25

12 HEAVY DUTY ARM APPLICATION HEAVY DUTY ARM (PUSH) APPLICATION D-4550 / D-4551 Series Door Closer Specifications EDA, H-EDA, S, CS, HS and HCS Can be templated for either 120 or 180 (when butt, frame and wall conditions permit.) Custom installation template may be available for unusual installation conditions. Contact Stanley for assistance. Hold-open is approximately 3º less than maximum door opening. Heavy Duty Push Installation Frame A 4" 102mm 13-9/16" 344mm 5-19/32" 142mm D-4550/D-4551 Heavy Duty Arm Application Standard Maximum Door Opening 120 Opening 160 Opening 180 Opening A = 7-3/8" A = 6-3/32" A = 4-5/8" (187mm) (155mm) (117mm) B = 6-1/2" B= 5-11/32" B= 3-3/4" (165mm) (136mm) (95mm) Frame 3-13/16" 97mm 5-11/16" 145mm Door B 13-1/32" 331mm 2-7/16" 62mm Drop Plate Installation P D (For drop plate dimensions see page 13.) 3-3/8" 86mm 2-1/8" 55mm 5/16" 8mm 2-3/8" 60mm Drop Plate Maximum Door Opening Frame 5 15/32" 139mm 11/16" 25mm 3-3/16" 81mm 120 Opening 160 Opening 180 Opening A = 9-3/8" A = 8-1/4" A = 6-5/8" (238mm) (210mm) (168mm) B = 8-1/2" B= 7-3/8" B= 5-3/4" (216mm) (187mm) (146mm) A Frame Door B 1/4" 6mm 8 D 4550 SERIES D 12 of 25

13 GE Magnetic Contacts Product Information Steel Door Contact 3 /4 and 1 contacts 1078/1076 Series Overview The GE Interlogix 1078 Series Steel Door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. The unique housing design features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances, both make and break. Over seven models including: Wide Gap, SPDT, DPDT, and Biased for High Security applications make the 1078 Series the most widely used and comprehensive line available. Architectural and Engineering Specifications Designed for use in Steel Doors On available models a terminal connection (T) makes installation easier. Simply strip the wire, insert it into the terminal block and tighten. The terminal accepts any wire size from 14 to 22 gauge, and has a unique one piece design for added strength. An optional Rare Earth Magnet is available. It is designed for use in metal entry/exit doors with a channel in the top of the door. The magnet eliminates the need to cut a mounting hole in the door channel. The flexible magnet housing can be compressed to accommodate a variety of channel widths for quick, easy installation. Adhesive is recommended. The contact contains a hermetically sealed magnetic reed switch. The reed shall be potted in the contact housing with a polyurethane based compound. Contact and magnet housing shall snap-lock into a 3/4" or 1" dia. hole. Housings shall be molded of flame retardant ABS plastic. Color of housings shall be off-white, grey or mahogany brown. The magnet shall be made of Alnico V. Rare Earth Magnet shall be made of neodymium iron boron. Snap-lock insulation bushing for tight fit and maximum gap in steel. Both contact and magnet plastic housings are constructed of one piece of thick-walled ABS plastic for maximum strength and durability. Standard Features Optional 1840 Rare Earth Magnet Fly leads and terminal options available Designed specifically for use in steel doors Special ribbed sides allow for easy installation Rugged unibody construction for maximum durability and reliability Terminal models available for easier installation Regular, Wide Gap, SPDT, DPDT, and High Security models available Rare Earth Magnet designed for steel door with top channel available Model numbers 1076, 1076W, 1076C, 1076CW, 1076D, 1078, 1078W, 1078C, 1078CT, (R)1078, 1078CTW Phone: Fax: Web: of info@clrwtr.com

14 Steel Door Contact 3 /4 and 1 contacts 1078/1076 Series Dimensions Specifications Models: (R)1078, 1078W, 1076, 1076W, 1076D Models: 1078C, 1076C, 1076CW, 1076CH 1.125" 2.86 cm 1.125" 2.86 cm 1.125" 2.86 cm.875" 2.22 cm 1.00" 2.54 cm 1.563" 3.97 cm 1.563" 3.97 cm Magnet Part No (included).375".962 cm.750" 1.91 cm Magnet Part No. 1921C (included) Form A: (R)1078, 1078W, 1078C, 1078CT, 1078CTW Voltage 100V AC/DC max. Current 0.5 A max. Power 7.5 W max. Form C: 1076, 1076W, 1076D, 1076C(D), 1076CW, 1076CH Voltage 30V AC/DC max. Current 0.25 A max. Power 3.0 W max. Rare Earth Magnet Models: 1078CT, 1076CTW, 1.625" 4.13 cm 1.56" 3.96 cm 0.375" 0.64 cm 0.89" 2.26 cm 1.813" 4.60 cm (R) prefix indicates Rare Earth Magnet Ordering Information Model Dia. Loop Type Electrical Config. Hole Required Gap Distance* Contact Magnet Wood* Steel* Rare Earth Color 1 1 Up to 1 / 2 Up to 5 / Up to /4 Up to 3 / 8 Up to 5 / Up to 1 / 2 Up to 5 / Up to 1 3 /4 7 /8 Up to 3 / 8 Up to 5 / W 1076D W 1076C 1076CW 1078C (R) CT 1078CTW 3 /4 3 /4 1 3 /4 3 /4 Open or Closed Open or Closed Open or Closed Closed Closed Open or Closed Open or Closed Closed Closed Closed Closed 0.938" 2.36 cm SPDT SPDT DPDT N/O N/O SPDT SPDT N/O N/O N/O N/O Magnet Part No (included) * Gap distances are nominal make distance ±20%. Gap specifications are for switch to make. Break distance is approximately 1.1 to 1.5 times make. 0.75" 1.91 cm 1 x x x x x x x x x x x x x x x x x x x x x x " 4.13 cm 0.5" 1.27 cm 0.625" 1.59 cm Legs may be cut for Height Adjustment 2 Up to 3 / 4 1 /2 N/A 1 Up to 1 / 2 Up to 5 / 8 7 /8 1/ 2 5 /8 5 /8 3/ 4 N/A Protected by U.S. Patent 5,844,458. M, N, G M, N, G M, N, G M, N, G M, N, G M, N, G M, N M, N, G M, N M, N N GE Interlogix 2002 GE Interlogix. All trademarks are properties of their owners. C-3617-FLG10K-0403 Phone: Fax: Web: of info@clrwtr.com

15 MILL FINISH ALUMINUM 5/16" [7.9mm] 1 1/4" [31.8mm] 1 3/4" [44.5mm] CLEAR ANODIZED ALUMINUM 3/16" [4.8mm] 1 1/4" [31.8mm] 1 3/4" [44.5mm] GREY P.V.C. GREY P.V.C. 3/16" [4.8mm] 1/4" [6.4mm] LISTED ANODIZED ALUMINUM WITH SOLID NEOPRENE STAINLESS STEEL AVAILABLE 1 1/4" [31.8mm] 1 25/32" [45.3mm] LISTED ANODIZED ALUMINUM & SILICONE SEAL 1" [25.4mm] 1 3/4" [44.5mm] 7/16" [11.1mm] 3/16" [4.8mm] DOMINION SWEEP 1 3/4" [44.5mm] LISTED 1 1/4" [31.8mm] LISTED 3" [76.2mm] ANODIZED ALUMINUM WITH SOLID NEOPRENE STAINLESS STEEL AVAILABLE 2 1/4" [57.2mm] ALUMINUM WITH SOLID NEOPRENE STAINLESS STEEL AVAILABLE 26 A PRODUCT OF K. N. CROWDER MFG. INC. 15 of 25

16 ES4 Electric Strike Features Fits 5/8 up to 3/4 latch with 1/8 door gap Latch position status standard Keeper closed & deadlocked/unlocked status standard Keeper open/closed optional Field selectable, failsecure/failsafe Field selectable voltage, 12/24V AC/DC 1/4 horizontal alignment adjustment Low profile, 1-3/16 deep Mounting tabs Non-handed Few moving parts for maximum life UL1034 Electrical Specifications Dual Voltage Coil: 12/24V DC, 12/24V AC Latch Position Status (std): SPDT, DRY 30V Keeper Closed & Locked Status (std): SPDT, Dry 30V Keeper Open/Closed Status (optional): SPDT, Dry 30V Dimensions ES4-A: 1-1/4 W x 4-7/8 H x 1-3/16 D (31.8 W x 124 H x 30.1 D mm) ES4-B: 1-1/4 W x 6-7/8 H x 1-3/16 D (31.8 W x 175 H x 30.1 D mm) ES4-C: 1-7/16 W 7-15/16 H x 1-3/16 D (36.5 W x H x 30.1 D mm) Electrical Data Monitoring Dual Voltage: 12/24VDC 12/24VAC Latch Status: Orange - COM White - N/O Grey - N/C Keeper- Open/Closed: Wht/Blk COM Yel/Blk - N/O Org/Blk - N/C Latch Status: SDPT, dry 30V (standard) Keeper Closed and Deadlocked (standard) Keeper Open/Closed Status: SPDT, Dry 30V (optional) Keeper/Deadlocked: Purple COM Brown - N/O Yellow - N/C Finish 606 Satin Brass 613 Oil Rubbed Bronze 628 Satin Aluminum (standard with ES4-B and ES4-C) 630 Satin Stainless Steel (standard with ES4-A) How to Order Series Model Faceplate Finish ES4 S standard K keeper open/closed status A-S 4 7/8 square A-R 4 7/8 round B 6 7/8* C 7 15/16* *Note - 6 7/8 & 7 15/16 only available in 628 finish Solenoid: Blk Red Green Red Black Blue Green 12V MOV Red Black Blue Green 24V MOV 2013 Stanley Security Solutions, Inc. BA /13 The electric door strike shall be installed in such a way as not to impair the operation of an emergency exit or panic hardware mounted on the door. Wire leads must not be connected to conductors larger than18awg of 25

17 Door Pull/Push 1180 Series, Style 1180 GSH Centre 12" (304.8) Material 1" (25.4) diameter Weight: Aluminum, 1.56 lbs (.73 kgs), multiply by three for other materials Finish: C32D, C28, C26D, C15, C10B, C10, C4 17 of 25

18 smart Magnalocks durable magnalocks Specialty locks exit devices entry devices access control accessories power supplies Product features Ultra-secure collapsing blind nuts mount to door frame for strength and reliability Fully sealed for weatherproof operations 3' [1 m] of jacketed, stranded conductor cable for each lock Automatic dual voltage - no field adjustment required Instant release circuit - no residual magnetism Noise suppression with included MOV Efficient, low power usage Rust resistant - All ferrous metal surfaces plated for durability MagnaCare Lifetime Replacement No Fault Warranty Product options (B) BondSTAT magnetic bond sensor Patented (MBS) (D) Integrated door position switch (DPS) (OS) Offset strike plates Specifications UL 10C Listed CAN4-S104, CAN/ ULC-S533 Listed ANSI/BHMA A156.23, Grade 1; E CSFM- California State Fire Marshal Approved Patent: 8,094,017 Holding Force: 1200lbs [544kg] per lock Dimensions: Magnalock: 22"L x 1-3/4"D x 3"H Strike: 6"L x 1/2"D x 2-3/4"H each Electrical: 250mA at 12VDC/lock 150mA at 24VDC/lock Operating Temperature: -40 to +140F [-40 to +60C] Indoor or Outdoor use Shipping Weight: 16lbs [7.26kg] Finishes: US32D/630 - Satin Stainless Steel Finish DM62 series Double Magnalock The Ultimate Magnalock Double Magnet for Indoor/Outdoor Higher Security The versatile DM62 electromagnetic lock offers strength and ease of maintenance for interior, perimeter and exterior access control - in a compact double magnet. This all-in-one unit is designed for double doors with no mullion. With unsurpassed durability, the DM62 will last long after most buildings wear out. models PART # Description DM62 M62 [Double] - 12/24VDC DM62B M62 [Double] - 12/24VDC, MBS DM62BD M62 [Double] - 12/24VDC, MBS, DPS DM62B-OS M62 [Double] - 12/24VDC, MBS w/ Offset Strike DM62D M62 [Double] - 12/24VDC, DPS DM62-OS M62 [Double] - 12/24VDC w/ Offset Strike ASCWB-DM62CL Alum 1-1/2" Spacer - Concrete/Wood Bracket, DM62, Clear For flexible mounting brackets, see page 28. 3" [76mm] 1-3/4" [44mm] 6" [152mm] 22" [559mm] 1/2" [12mm] 6" [152mm] 2-3/4" [70mm] power transfer 2-1/2" power accessories The DM62 with Strike fits in 2-1/2" of flat mounting space resources 18 of MAGLOCK SECURITRON.COM 2015, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

19 CHECKMATE STOPS & HOLDERS CONCEALED MOUNT 1 SERIES Product Description & Features Heavy-duty Interior or exterior doors Doors may be single or double acting Non-handed Slide track design Recommended for high traffic, heavy abuse installations Heavy shock absorber spring provides 5-7 compression before dead stop LS option omits spring for special applications Surface on/off knob on hold open models Stop, friction stay or hold open functions Complete screw packet for installation in wood and machine screws for door and frame. For security areas, Torx screws available for exposed fasteners Standard architectural finishes Durable slider cam and shock block 110 maximum opening 1-3/4" minimum door thickness, for thicker doors, note thickness when ordering 1-3/16" square channel Stop function UL listed for fire door assemblies Hanging means other than standard butts or offset pivots require special templating and pricing. Consult factory Door Opening Chart (in inches) Butts Offset Pivots Center Hung Pivots Model Number Friction H.O. Stop * / / / / / / / Shipping Weight 4.5 lbs. ANSI No. Friction H.O. Stop C01531 C01511 C01541 *Butt hung only on this size door. No swing clear hinges. 6 Copyright 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 19 of 25

20 PIVOTS AND PIVOT SETS OFFSET HUNG MODEL 173 Application Interior Doors Weight 150 lbs Door Sizes up to 3'0" x 8'0" x 1-3/4" Handed ANSI/C07162/C07202 Product Description & Features Standard top pivot 180 included 119 intermediate pivot recommended for all doors over 6'8" (order separately) see page 18 Bottom pivot mounts directly to concrete floor Uses same arm and cap as 117 pivot set Non-ferrous base metal 3/4" offset only (measured from centerline of pivot to face of door) Available for 1-1/2" (38mm) offset (door weight 100 lbs) for doors with cladding or frame molding Door edges must be beveled 1/8" in 2" Furnished with wood and metal screws 3/8" vertical adjustment No spindle extensions available Door will swing 180, trim permitting 1-3/4" (9) Technical Information Frame stop required 1-3/32" (28) 3/4" (13) 3/8" (10) MODEL 147 Application Exterior or Interior Doors Weight to 600 lbs.* Door Width up to 4'0" (1219mm) Handed ANSI/C07162/C07202 * Door size & weight guidelines are determined using the appropriate number of intermediate pivots Product Description & Features Standard top pivot 180 included M19 intermediate pivot required (order separately); see page 18 Bottom pivot mounts directly to floor Uses same arm and cap as 27 floor closer Available for fire door assemblies up to three hours (ferrous material) specify F147. Intermediate pivot required by UL. Specify FM19 (order separately), see page 18 For 20-minute label suffix 20 to the part number Non-ferrous base material Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot 3/4" (19mm) offset (measured from centerline of pivot to face of door) Available for 1-1/2" (38mm) offset (door weight 350 lbs.) for doors with cladding or frame molding Door edges must be beveled 1/8" in 2" Furnished with wood and machine screws Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard Doors will swing 180, trim permitting Technical Information Frame stop required 8 Copyright , Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 20 of 25

21 EXTRUDED ALUMINUM WITH RIGID P.V.C. 4" [101.6mm] EXTRUDED ALUMINUM WITH RIGID P.V.C. 5" [127mm] EXTRUDED ALUMINUM WITH RIGID P.V.C. 6" [152.4mm] EXTRUDED ALUMINUM WITH RIGID P.V.C. EXTRUDED ALUMINUM WITH RIGID P.V.C. EXTRUDED ALUMINUM WITH RIGID P.V.C. EXTRUDED ALUMINUM WITH RIGID P.V.C. EXTRUDED ALUMINUM WITH RIGID P.V.C. EXTRUDED ALUMINUM WITH RIGID P.V.C. 6" [152.4mm] 7" [177.8mm] 8" [203.2mm] 9" [228.6mm] 10" [254mm] 3" [76.2mm] 2" [50.8mm] 14 A PRODUCT OF K. N. CROWDER MFG. INC. 21 of 25

22 1 5/16" [33.3mm] 1" [25.4mm] 1 1/4" [31.8mm] 1" [25.4mm] 7/16" [11.1mm] 5/16" [7.9mm] 7/16" [11.1mm] 5/16" [7.9mm] CLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND NEOPRENE CLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND PILE WITH FIN SEAL CLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND SILICONE 1 13/32" [35.7mm] 1 1/16" [27mm] 21/32" [16.7mm] 1" [25.4mm] 1/4" [6.4mm] 25/32" [19.8mm] 1/4" [6.4mm] LISTED CLEAR ANODIZED ALUMINUM AND EXTRUDED NEOPRENE CLEAR ANODIZED ALUMINUM AND SILICONE LISTED MILL FINISH ALUMINUM AND CLOSED CELL NEOPRENE 1 5/16" [33.3mm] 1" [25.4mm] 1 1/4" [31.8mm] 1 1/16" [27mm] 1/4" [6.4mm] 1/2" [12.7mm] 13/32" [10.3mm] 3/8" [9.5mm] LISTED CLEAR ANODIZED ALUMINUM AND SILICONE RUBBER SUITABLE o o o o FOR -110 F ( -80 C) TO +570 F (+300 C) CLEAR ANODIZED ALUMINUM AND EXTRUDED NEOPRENE 100% CANADIAN OWNED AND OPERATED LISTED of 25

23 23 of 25

24 24 of 25

25 25 of 25