Luma the vision is reality

Transcription

1 Lighting Luma the vision is reality Luma Micro Luma is a high-performance road-lighting luminaire with a clear design identity, offering a perfectly cooled, fit-and-forget solution for all streets and roads. The lumen package, lifetime and energy profile can be tuned to create the desired solution in terms of energy and cost savings. Luma can be programmed to keep the flux of the LEDs at a predefined constant level over the lifetime of the luminaire by increasing the operating current over time to compensate for the LED lumen depreciation. This eliminates over-lighting at the beginning, enabling additional extra energy savings. Luma uses the high-performance LEDGINE-O engine with latest LED performance and a wide range of optics to latest standards. Moreover, Luma s truly flat design prevents upward light. To optimize the light distribution for varying road geometries and/or glare restrictions, the tilt angle can easily be adjusted on installation. Benefits Choice of lens optics to match international road and street geometries Combination of lenses and tilt adjustment options ensures high project flexibility Dedicated lumen packages deliver energy savings of over 50%, with a related reduction in CO<SUB>2</SUB> emissions Features LEDGINE-O engine technology for an integrated, uncompromised approach to LED luminaire design COO-LED thermal management the integral design approach taken ensures that many luminaire parts contribute to the coolest and therefore most efficient lighting solution L-Tune tool Adjustable tilt angle

2 Application Motorways, inter-urban main roads, boulevards and avenues, roundabouts, pedestrian crossings Residential streets, side streets, squares, parks, cycle and pedestrian paths, playgrounds Parking areas, industrial areas, petrol stations, rail yards, airports, harbors, waterways Specifications Type BGP615 Optical cover Flat cover, glass Light source Integral LED-module Material Housing: die-cast aluminum, corrosion resistant Power WW: 5.6 up to 40W, NW/CW: 5.9 up to 43.5W Cover: toughened glass Luminous flux Neutral and Cool : nominal: 800 to 6,500 lm Gear tray: aluminum Spigot: die-cast aluminum system: 700 to 6,100 lm Warm : nominal: 600 to 4,900 lm system: 500 to 4,500 lm Or tailor flux using L-Tune software Color Connection Maintenance Anthracite or light grey M20 cable gland for cable Ø 6-12 mm and for Ø mm Canopy with LED module and gear tray hinges upwards and is secured by a stainless steel locking bar (2 positions), making the LED module and gear tray safely accessible from below Luminaire efficacy Correlated Color NW/CW up to 150 lm/w, WW up to 121 lm/w 3000, 4000 or 5700 K Safe Maintenance Technology (SMT) safety switch disconnects power on opening Color Rendering Index >70 or 80 Installation Post top and side entry mounting possible (Ø 62 mm) Recommended mounting height: 4-6 m Lumen maintenance at median useful life* h up to L96 Standard tilt angle post top: 0º Adjustable tilt angle: º Max SCx: m² Control gear failure rate at 10% median useful life h SR compatibility For SR based luminaires only SR Certified components/sensors are to be used (see also: products/driving-connected-lighting). Performance Ambient Tq Operating temperature range Driver Mains voltage Optic +25 ºC -40 to +35ºC Programmed LED drivers V / Hz Narrow, medium, wide or extra wide road optics: DM10, DM11, DM12, DM13, DM30, DM31, DM32, DM33, DM50, DM70, DPR1, DPL1, DS50, DW10, DW50, DX10, DX50, DX51, DX70, DN09, DN10, DN11, DN50, DRM1, DRM2, DRN1, DRN2, Functional compatibility of 2 (SR certified) components/sensors to be used in combination as well as override possibility of any lineswitch function used in a SR based luminaire, is to be released by the master component/sensor supplier. For the use of NEMA 7pin socket on a SR based luminaire a full system verification is required. Not following these advises can/will cause risk of damage and non-compliance for which Signify cannot take any responsibility. " 2

3 Versions Luma Micro BGP615 road-lighting luminaire, post-top version Approval and Application Mech. impact protection code IK09 General Information Luminaire light beam spread 154 CE mark - Optical cover/lens type Flat glass Driver included Yes ENEC mark ENEC mark Flammability mark - Light source replaceable Yes Number of gear units 1 unit Product Family Code BGP615 Application Conditions Maximum dim level BGP615 LED10-4S/ PSU I DM10 GR SRG10 Not applicable BGP615 LED10-4S/ PSU I DM10 Not applicable BGP615 LED39-4S/ PSR I DM50 Programmable BGP615 LED44-4S/ PSU I DM70 Not applicable BGP615 LED49-4S/ PSD I DN10 0% (digital) BGP615 LED22-4S/757 PSR I DX10 Programmable BGP615 LED54-4S/757 PSD I DX70 0% (digital) BGP615 LED24/ PSDD I DM11 Programmable BGP615 LED54/ PSDD I DM11 Programmable Initial Performance (IEC Compliant) Init. Color Rendering Index 70 Light Technical Standard tilt angle side entry 0 Standard tilt angle posttop 0 Upward light output ratio 0 Mechanical and Housing Color Gray Approval and Application Surge Protection (Common/ Surge Protection (Common/ Differential) Differential) BGP615 LED10-4S/ PSU I DM BGP615 LED22-4S/757 PSR I DX10 GR SRG BGP615 LED54-4S/757 PSD I DX BGP615 LED10-4S/ PSU I DM BGP615 LED24/ PSDD I DM BGP615 LED39-4S/ PSR I DM BGP615 LED44-4S/ PSU I DM BGP615 LED54/ PSDD I DM BGP615 LED49-4S/ PSD I DN10 3

4 Controls and Dimming Dimmable BGP615 LED10-4S/ PSU I DM10 GR SRG10 No BGP615 LED10-4S/ PSU I DM10 No BGP615 LED39-4S/ PSR I DM50 Yes BGP615 LED44-4S/ PSU I DM70 No BGP615 LED49-4S/ PSD I DN10 Yes Dimmable BGP615 LED22-4S/757 PSR I DX10 Yes BGP615 LED54-4S/757 PSD I DX70 Yes BGP615 LED24/ PSDD I DM11 No BGP615 LED54/ PSDD I DM11 No Operating and Electrical Driver current BGP615 LED10-4S/ PSU I DM10 GR SRG BGP615 LED10-4S/ PSU I DM ma BGP615 LED39-4S/ PSR I DM ma BGP615 LED44-4S/ PSU I DM ma BGP615 LED49-4S/ PSD I DN ma Driver current BGP615 LED22-4S/757 PSR I DX ma BGP615 LED54-4S/757 PSD I DX ma BGP615 LED24/ PSDD I DM BGP615 LED54/ PSDD I DM11 - General Information (1/2) Light Lamp Number of Light Lamp Number of source family light source family light color Glow-wire test code sources color Glow-wire test code sources BGP615 - LED BGP cool LED22 12 pcs LED10-4S/ PSU I LED22-4S/757 PSR I DM10 GR SRG10 DX BGP615 LED10 12 pcs BGP cool LED54 LED10-4S/ PSU I LED54-4S/757 PSD I DM10 DX BGP615 LED BGP615 LED24/ - LED24 - LED39-4S/ PSR I PSDD I DM11 GR DM50 DDF27 D BGP615 LED BGP615 LED54/ - LED54 - LED44-4S/ PSU I PSDD I DM11 GR DM70 DDF27 D BGP615 LED49 LED49-4S/ PSD I DN10 General Information (2/2) Optic type BGP615 LED10-4S/ PSU I DM10 GR SRG10 Distribution medium BGP615 LED10-4S/ PSU I DM10 Distribution medium BGP615 LED39-4S/ PSR I DM50 Distribution medium BGP615 LED44-4S/ PSU I DM70 Distribution medium BGP615 LED49-4S/ PSD I DN10 Distribution narrow 10 Optic type BGP615 LED22-4S/757 PSR I DX10 Distribution extra wide BGP615 LED54-4S/757 PSD I DX70 Distribution extra wide BGP615 LED24/ PSDD I DM11 Distribution medium BGP615 LED54/ PSDD I DM11 Distribution medium 11 Initial Performance (IEC Compliant) 4

5 Init. Corr. Color Initial luminous Init. Corr. Color Initial luminous flux flux BGP615 LED10-4S/ PSU I DM K 900 lm BGP615 LED22-4S/757 PSR I DX K 1914 lm GR SRG BGP615 LED10-4S/ PSU I DM K 900 lm BGP615 LED54-4S/757 PSD I DX K 4536 lm BGP615 LED39-4S/ PSR I DM K 3471 lm BGP615 LED24/ PSDD I DM K 2184 lm BGP615 LED44-4S/ PSU I DM K 3828 lm BGP615 LED54/ PSDD I DM K 4914 lm BGP615 LED49-4S/ PSD I DN K 4459 lm 2018 Philips Lighting Holding B.V. All rights reserved. Philips Lighting reserves the right to make changes in specifications and/or to discontinue any product at any timewithout notice or obligation and will not be liable for any consequences resulting from the use of this publication , September 17 -