Z-VAC. Bobcat/Bunton. Series. Mower Collection System Kits: ASSEMBLY INSTRUCTIONS OPERATOR'S MANUAL PARTS LIST

Size: px
Start display at page:

Download "Z-VAC. Bobcat/Bunton. Series. Mower Collection System Kits: ASSEMBLY INSTRUCTIONS OPERATOR'S MANUAL PARTS LIST"

Transcription

1 ASSEMBLY INSTRUCTIONS OPERATOR'S MANUAL PARTS LIST Z-VAC Mower Collection System Kits: Models covered: Bagger B 3-B 3-BD Bobcat/Bunton Series Actual product may differ slightly from product pictured above Blower Weight Bar V 52-V 61-V 48-WB 52-WB 61-WB Manual No (I.R. 2/9/04)

2 1 preliminaries Congratulations! You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared for, your new Z-Vac Mower Collection System will provide years of dependable service. Please read and follow this instruction manual carefully in order to get the most out of your new equipment. As you carefully unpack your unit, you will find the following items: 1 Z-Vac Blower Unit 1 Bagger Unit with Mounting Kit 1 Weight Bar Kit 1 Package containing operating manuals and warranty registration Each product leaves our factory in excellent condition; occasionally, however, some damage may occur during shipment. If any such damage is found upon initial inspection, immediately notify the transport carrier who delivered your machine, as they are solely responsible for such damage, as well as any subsequent adjustments necessary. Before assembly, please take a moment and record your model number and serial number below for future reference (both numbers are located on the silver tag attached to the blower housing): Model number Serial number Also be sure to promptly fill out and return the warranty registration enclosed in your manual packet. Your new Z-Vac requires very little assembly. Simply follow the instructions contained within this manual to begin enjoying the benefits of your new unit. 2 GVTP ZVBB-R0203.1

3 safety rules regarding outdoor power equipment 2 IMPORTANT! READ CAREFULLY THE FOLLOWING SAFETY RULES BEFORE ASSEMBLING OR OPERATING UNIT. TRAINING -- Read, understand, and follow all instructions in the manual and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the owner's responsibility to explain this material to them. -- Become familiar with the safe operation of the equipment, operator controls, and safety signs. -- All operators and mechanics should be trained. The owner is responsible for training the users. -- Only allow responsible adults, who are familiar with the instructions, to operate the unit. -- Never let children or untrained people operate or service the equipment. Local regulations may restrict the age of the operator. -- The owner/user can prevent and is responsible for accidents or injuries occurring to themselves, other people or property. PREPARATION -- Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job. Use only accessories and attachments approved by the manufacturer. -- Wear appropriate clothing including safety shoes, safety glasses and ear protection. Long hair, loose clothing or jewelry may get tangled in moving parts. -- Inspect the area where the equipment is to be used and remove all objects such as rocks, toys and wire, which can be thrown by the machine. -- Use extra care when handling gasoline and other fuels. They are flammable and vapors are explosive. a) Use only an approved container. b) Never remove fuel cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. c) Never refuel or drain the machine indoors. -- Check that operator's presence controls, safety switches and shields are attached and functioning properly. Do not operate unless they are functioning properly. OPERATION -- Never run an engine in an enclosed area. -- Operate only in the daylight or with good artificial light, keeping away from holes and hidden hazards. -- Be sure of your footing while using pedestrian controlled equipment, especially when backing up. Walk, don't run. -- Do not operate in reverse unless absolutely necessary. Always look down and behind before and while traveling in reverse. -- Be aware of the blower discharge direction and do not point it at anyone. Do not operate the blower without hose and bagger hood in place. -- Never leave a running unit unattended. Always stop engine before leaving unit. -- Never operate with guards not securely in place. Be sure all safety features are attached, adjusted properly and functioning properly. -- Never operate with the hose or hood removed or altered. -- Do not change the engine governor setting or over speed the engine. -- Stop on level ground, shut off engine before leaving the operator's position for any reason. -- Stop equipment and inspect impeller blades after striking objects or abnormal vibration occurs. Make necessary repairs before resuming operations. -- Keep hands and feet away intake and discharge areas. -- Keep pets and bystanders away. -- Do not operate the unit while under the influence of alcohol or drugs. -- Use caution when crossing roads and sidewalks. Stop engine if not blowing. -- Use care when loading or unloading the machine into a trailer or truck. -- Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision. SLOPE OPERATION Slopes are a major factor related to loss-of-control and tipover accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope, or if you feel uneasy on it, do not drive on it. Do -- Mow across the face of slopes; never up and down. -- Remove obstacles such as rocks, tree limbs, etc. -- Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles. -- Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Do Not -- Do not start or stop on a slope. If tires lose traction, proceed slowly straight down the slope. -- Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible. -- Do not use near drop-offs, ditches, or embankments. The operator could lose footing or balance or blower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in. -- Do not operate on slopes with wet grass. Reduced footing or traction could cause sliding. -- Do not use on excessively steep slopes. 3 GVTP ZVBB-R0203.1

4 2 safety rules regarding outdoor power equipment CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and its activity. Never assume that children will remain where you last saw them. -- Keep children out of the mowing area and under the watchful care of another responsible adult. -- Be alert and turn unit off if children enter the area. -- Before and during reverse operation, look behind and down for small children. -- Never allow children to operate the unit. -- Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. EMISSIONS -- Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm. -- Look for the relevant Emissions Durability Period and Air Index information on the engine emissions label. MAINTENANCE AND STORAGE -- Always observe safe refueling and fuel handling practices when refueling the unit after transportation or storage. -- Always follow the engine manual instructions for storage preparations before storing the unit for both short and long term periods. -- Always follow the engine manual instructions for proper start-up procedures when returning the unit to service. -- Never store the machine or fuel container inside where there is an open flame, such as in a water heater. Allow unit to cool before storing. -- Shut off fuel while storing or transporting. Do not store fuel near flames or drain indoors. -- Keep all hardware tight and keep all parts in good working condition. Replace all worn or damaged decals. -- Never tamper with safety devices. Check their proper operation regularly. -- Clean leaves and debris from mufflers and engine to prevent fires. Clean up oil or fuel spillage. -- Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. -- Never make adjustments or repairs with the engine running unless specified otherwise. -- Park machine on level ground. Never allow untrained personnel to service machine. -- Carefully release pressure from components with stored energy. (e.g. springs) -- Only replace impellers. Never straighten or weld them. -- Keep hands and feet away from moving parts. -- Frequently check components and replace with manufacturer's recommended parts, when necessary. -- Use only factory authorized replacement parts when making repairs. -- Always comply with factory specifications on all settings and adjustments. -- Only authorized service locations should be utilized for major service and repair requirements. -- Never attempt to make major repairs on this unit unless you have been properly trained. Improper service procedures can result in hazardous operation, equipment damage and voiding of manufacturer's warranty. 4 GVTP ZVBB-R0203.1

5 unit assembly 3 Deflector Removal - All Models Remove hardware securing Discharge Deflector to mower deck and remove deflector. Important Note: Reattach hardware to deflector and store for future use. Never operate any mower without a discharge deflector securely in place. Deck Pulley Guard Removal - All Models Remove hardware securing right deck pulley guard to mower deck and remove guard. Set hardware aside for future vac assembly step. Important Note: Store guard for future use. Never operate any mower without a pulley guard securely in place. Vac Pulley Installation - All Models Lifting up foot rest/center deck cover to expose center blade deck, insert a 3/8 drive breaker bar with an extension into the tension release hole in the blade belt idler arm and twist counterclockwise to relieve tension, while slipping blade belt from right blade drive pulley. Note: Assistance may be needed for removal of blade belt. Remove right blade pulley, replacing with supplied two-tiered Z-Vac drive pulley. Use same hardware as hardware removed, making sure to tighten securely to manufacturer s specs. Replace blade belt around bottom tier of pulley, using method described above. Close foot rest/center deck cover. Note: Assistance may be needed for replacement of blade belt. 5 GVTP ZVBB-R0203.1

6 3 unit assembly Vac Unit Installation - All Models (61 shown) Fit Z-Vac unit into place over and against mower discharge, aligning holes in discharge mounting brackets with holes in Z-vac mounting bracket. Insert one 3/8 x 2 clevis pin into each of the two mounting holes, securing with bridge pins. Lock unit firmly in place with T-bolt as shown. Vac Belt Installation - All Models Install Z-vac drive belt onto top tier of vac drive pulley. Be sure belt runs through vac idler system correctly; also be sure there is no belt rollover. Note: Pull back tension release lever on idler arm (see inset) to give extra belt slack when installing. Belt Guard Installation - All Models (61 shown) Install Vac Drive belt guard using existing rider hardware. Tighten securely. Install vac unit pulley guard (inset) with three 5/16-18 x 3/4 F thread bolts. Tighten securely. 6 GVTP ZVBB-R0203.1

7 unit assembly 3 Weight Bar Kit Installation - All Models (61 shown)!! Warning: Weight kit must be installed prior to installing bagger unit. Failure to do so may result in longitudal tipping of unit. Lay weight mount channel across front end of unit as shown. Secure to unit with two clamp plates, one under each caster arm, each held on with two 3/8-16 x 3-1/4 hex bolts and two reverse lock nuts. Tighten securely. Secure weight bars to weight mount channel with three 1/2-13 x 3-1/4 hex bolts and three serrated flange nuts. Tighten securely.!! Warning: Always install all supplied weight bars onto weight mount channel. Failure to do so may result in longitudal tipping of unit. Bagger Installation - 2 Bag Units Assemble bumper mount plate onto rear bumper bar of mower. Use two bar clamps on top portion of plate, fastening from in front of bumper bar, with four 3/8-16 x 1-1/4 hex bolts and serrated flange nuts. Fasten bottom with one bumper spacer and same hardware as above. Tighten all hardware securely. Rear View Top View Assemble the upper reinforcement brace as shown, using two 3/8-16 x 1-1/4 hex bolts, fitted with two 3/8 flat washers, and securing with two 3/8-16 serrated flange nuts. Do not tighten hardware. 7 GVTP ZVBB-R0203.1

8 3 unit assembly Bagger Installation - 2 Bag Units (Cont.) Install the reinforcement brace assembly onto the unit, utilizing the square holes in the engine base. Secure with four 5/16-18 x 3/4 carriage bolts (inserted up from under the engine base) and serrated flange nuts. Note: Do not tighten brace hardware until support assembly in following steps is installed. Bolts Cross Assembly Cover Latch Arm Attach Cross Assembly (with attached hood assembly) to Cover Support Assembly with four 3/8-16 x 3/4 hex bolts and four 3/8-16 serrated flange nuts. Tighten securely. Attach Cover Latch Arm to Cover Support Assembly with two 5/16-18 x 3/4 hex bolts and 5/16-18 serrated flange nuts. Tighten securely. Set bottom of support assembly onto pins in bottom of bumper mount. Holding support assembly upright, align holes in support assembly with corresponding holes in bumper mount and reinforcement brace. Slide 5/8 x 17 locking pin through holes in bumper mount, securing with 2-1/2 oal bridge pin. Slide 3/8 x 18 locking pin through holes in top of reinforcement brace, securing with 1-7/8 oal bridge pin. Now tighten all brace hardware securely. 8 GVTP ZVBB-R0203.1

9 unit assembly 3 Bagger Installation - 2 Bag Units (Cont.) Lift cover and install bags onto plate/channel assembly by hooking slot in bag hanger onto tabs in channel assembly. Close cover and lock in place by hooking lock knob into slot in cover latch arm. Using the mounting bracket at the foot of the Discharge Hose Standoff as a template, drill two 7/16 holes into the right upper rear bumper bar of the rider, just forward of the rear radiator support bar bolt head. Fasten standoff to bumper bar with two 5/16-18 x 1 hex bolts and serrated flange nuts. Tighten securely. Note: Make sure standoff angles upwards upon installation. Proceed to Discharge Hose Installation. Bagger Installation - 3 Bag Units Preassemble bumper mount plate as shown, securing two sets of two short clamp bars into top of plate with one 3/8-16 x 1-3/4 hex bolt and serrated flange nut. Leave nuts loose. Also note position of bottom clamp bar that will be addressed in following step. 9 GVTP ZVBB-R0203.1

10 3 unit assembly Bagger Unit Installation - 3 Bag Units (Cont.) Hook bumper mount plate onto rear bumper, making sure one bar clamp is in front of bumper, another behind. Secure in place with same hardware in lower set of holes as in previous step. Do not tighten yet. Repeat the same for the bottom part of the mount, using the long clamp bar, one on the inside and one on the outside of the bumper. Insert two 3/8-16 x 1-3/4 bolts from the bumper mount side, securing with two 3/8 flat washers and two 3/8-16 nylon lock nuts. Tighten securely. Assemble the upper reinforcement brace as shown, using two 3/8-16 x 1-1/4 hex bolts, each fitted with one 3/8 flat washer, and secure with two 3/8-16 serrated flange nuts. Do not tighten hardware. Install the reinforcement brace assembly onto the unit, utilizing the square holes in the engine base. Secure with four 5/16-18 x 3/4 carriage bolts (inserted up from under the engine base) and serrated flange nuts. Note: Do not tighten brace hardware until support assembly in following steps is installed. 10 GVTP ZVBB-R0203.1

11 unit assembly 3 Bagger Unit Installation - 3 Bag Units (Cont.) Install the plate/channel assembly onto the support assembly using two 5/16-18 x 3/4 carriage bolts through the top holes, and two 5/16-18 x 1-1/4 carriage bolts for the bottom holes. Secure with four 5/16-18 serrated flange nuts. Bolts Set bottom of support assembly onto pins in bottom of bumper mount. Holding support assembly upright, align holes in support assembly with corresponding holes in bumper mount and reinforcement brace. Slide 5/8 x 17 locking pin through holes in bumper mount, securing with 2-1/2 oal bridge pin. Slide 3/8 x 18 locking pin through holes in top of reinforcement brace, securing with 1-7/8 oal bridge pin. Now tighten all brace hardware securely. Install Cover Latch Arm onto support assembly by first inserting two 5/16-18 x 3/4 hex bolts out through corresponding holes in the support assembly. Then fit the latch arm over bolts and secure with two 5/16-18 serrated flange nuts. 11 GVTP ZVBB-R0203.1

12 3 unit assembly Bagger Unit Installation - 3 Bag Units (Cont.) Install intake flange and inner deflector as shown using four 5/16-18 x 1 hex bolts, flat washers and nylon lock nuts. Tighten securely. Note that the intake flange should be angled downward. Set cover on plate assembly, aligning hinges in cover with hinges on plate. Secure with three 3/8 x 2-3/4 clevis pins and 1-3/4 oal bridge pins. Lift cover and install bags onto plate/channel assembly by hooking slot in bag hanger onto tabs in channel assembly. Close cover and lock in place by hooking lock knob into slot in cover latch arm. 12 GVTP ZVBB-R0203.1

13 unit assembly 3 Discharge Hose Installation - All Models (3 Bag Unit shown) Slip one hose clamp onto each end of hose (use the clamp with the quick-release knob at the blower end), and install hose between unit and bagger, making careful note of direction sticker inside end of hose (see inset). Tighten clamps securely. Note: On 2 bag units, be sure to slip middle of hose length into cradle of Discharge Hose Standoff, in order to prevent hose from hitting rear wheel of rider. Assembly is complete. Refer to the operator s manual of your rider for the safest and most effective use of your new unit. SOME IMPORTANT DO S AND DON TS FOR SAFE AND EFFECTIVE OPERATION: DO......Inspect unit before each use to be sure all fasteners are securely tightened and all components are securely in place....be aware that installed blower unit engages along with mower deck - never operate mower without hose, cover and bags in place....inspect unit often for wear and damage. Replace worn or damaged items promptly....grease bearing units regularly with a quality lithium grease. DO NOT......Operate the rider without the weight channel and bars installed. Rear tipping of rider can result....operate the unit without belt guards securely in place. Serious injury may result....overfill bags. A good rule of thumb is to empty bags at about 3/4 capacity....store unit with bags full. Stretching and eventual tearing of bag material may result. 13 GVTP ZVBB-R0203.1

14 4 illustrated parts list - BLOWER GROUP: 48-V, 52-V, 61-V

15 4 illustrated parts list - BLOWER GROUP: 48-V, 52-V, 61-V Item Part Number Qty Description WELDMENT, Blower Belt Guard NUT, 1/2-13 Hex Nyloc WASHER, 1/2" Flat SAE PULLEY, A Groove Idler, Steel IDLER STUD (3/8-24 thread) WASHER, 9/16 Flat, Narrow Type FLANGE BEARING, 9/16" I.D COTTER PIN, 1/8 x 3/4" BELT RETAINER, Idler SCREW, 5/16-18 x 1-1/4" Hex Head Cap, GR WELDMENT, Idler Arm NUT, 5/16-18 Hex Flange Lock SCREW, 1/2-13 x 2-1/2" Hex Head Cap, GR WELDMENT, Blower Housing BACK PLATE, Blower SCREW, 5/16-18 x 3/4" Hex Washer Self-Tap BEARING, Pillow Block, Blower (includes grease fitting) NUT, 7/16-14 Hex Center Lock SCREW, 7/16-14 x 1-1/2" Hex Head Cap, GR WELDMENT, Impeller, Fast Vac Blower SCREW, 7/16-14 x 1-1/4" Hex Head Cap, GR NUT, 3/8-16 Hex Flange Lock BELT RETAINER PULLEY, Flat Idler, 2-3/4" O.D WASHER, 3/8" SAE Flat SCREW, 3/8-16 x 2-1/4" Hex Head Cap, GR NUT, 3/8-24 Hex Nyloc SCREW, 3/8-16 x 2", Hex Head Cap, GR U-CLIP, 5/ SCREW, 5/16-18 x 3/4" Hex Washer Self-Tap Ref V Blower Kit Ref V Blower Kit Ref V Blower Kit

16 4 illustrated parts list - BLOWER MOUNT GROUP: 48-V, 52-V, 61-V

17 4 illustrated parts list - BLOWER MOUNT GROUP: 48-V, 52-V, 61-V Item Part No. Qty. Description BELT, Blower Unit Drive, Model 48-V, 61-V BELT, Blower Unit Drive, Model 52-V WELDMENT, 48" Belt Shield WELDMENT, 52" Belt Shield WELDMENT, 61" Belt Shield PULLEY, Deck, Bobcat WELDMENT, Mounting Bracket, 48" Fast-Vac WELDMENT, Mounting Bracket, 52" Fast-Vac WELDMENT, Mounting Bracket, 61" Fast-Vac SCREW, 5/16-18 x 3/4" Hex Washer Self-Tap CLIP, Belt Guard Support (Model 48-V only) WELDMENT, Guard Support Bracket (Not Shown, 52-V, 61-V Only) PIN, Clevis HAIRPIN, Cotter WELDMENT, T-Handle Pin SCREW, 5/16-18 x 1" Hex Head Cap, GR NUT, 5/16-18 Hex Flange Lock NUT, 5/16-18 Hex Center Lock, GR B SPRING, Idler, Fast Vac NUT, 5/16-18 Hex Center Lock, GR B PULLEY, Blower Input, Model 48-V & 52-V PULLEY, Blower Input, Model 61-V KEY, 1/4 Square x 1-7/16" SCREW, 3/8-16 x 6" Hex Head Cap, GR NUT, 5/16-18 Hex Large Flange Center Lock Ref V Blower Kit Ref V Blower Kit Ref V Blower Kit

18 4 illustrated parts list - TWIN BAG CATCHER, 2-B

19 4 illustrated parts list - TWIN BAG CATCHER, 2-B Item Part No. Qty. Description ASSEMBLY, 2 Bag Cover and Screen (includes Item No. 5, 12, 13, 14, 42, 43, 44, 45) WINDOW, Cover * 1 DECAL, Safety, Grass Bag CLIP, Canoe WASHER,.188 Rivet SCREW, #10-32 x 1-1/2 Hex Washer Head Machine w/nylon Patch WASHER,.19 x.38 x.06 Flat STRAP, Rubber NUT, #10-32 Hex Nyloc KNOB PIN, Round Head SCREEN SEAL, Clip POP RIVET, 3/16 x.265 Alum TUBE CLIP, Grass Bag HANGER, Grass Bag BOLT, 5/16-18 x 3/4" Square Neck Carriage, GR HOOP, Grass Bag GRASS BAG CLAMP, Grass Bag WASHER, 5/16" Split Lock NUT, 5/16-18 Hex, GR5 or B HOSE CLAMP, Upper HOSE, Snapper Fast Vac HOSE CLAMP, Lower, Fast Vac SCREW, #10-24 x 1-1/4" Hex Head Cap, GR NUT, #10-24 Hex Nyloc HAIR PIN, 2.62 Cotter CROSS ASSEMBLY BOLT, 1/4-20 x 3/4" Short Neck Carriage SCREW, 1/4-20 x 3/8" Hex Washer Self-Tap STRAP, Tube Support WASHER,.191 I.D. Flat WELDMENT, Hose Adapter/Deflector WASHER, 1/4" Flat NUT, 1/4-20 Hex Nyloc SCREW, 10F x 7/8" Pan Head Cross Recess 37a n/a 1 SCREW, #10-32 x 1

20 4 illustrated parts list - TWIN BAG CATCHER, 2-B (cont d)

21 4 illustrated parts list - TWIN BAG CATCHER, 2-B (cont d) POP RIVET, 3/ SUPPORT, Tube SEAL, 2 Bag Catcher BRACKET, Seal SCREW, #10-12 x 5/8 Hex Washer Self-Tap WASHER, ¼ Split Lock CABLE, Double Loop NUT, Speed WELDMENT, 2 Bag Hose Support SCREW, 5/16-18 x ¾ Hex Head Cap, GR NUT, 5/16-18 Hex Flange Lock Ref Twin Bag Catcher Kit

22 4 illustrated parts list - TWIN BAG CATCHER, 2-B: MOUNT GROUP

23 4 illustrated parts list - TWIN BAG CATCHER, 2-B: MOUNT GROUP Item Part No. Qty. Description WELDMENT, Bagger Mount Frame SCREW, 3/8-16 x 3/4" Hex Head Cap, GR NUT, 3/8-16 Hex Flange Lock ARM, Cover Latch SCREW, 5/16-18 x 3/4" Hex Head Cap, GR NUT, 5/16-18 Hex Flange Lock WELDMENT, Bumper Mounting Plate BAR, Clamp SHIM, Catcher Mount SCREW, 3/8-16 x 1-1/4" Hex Head Cap NUT, 3/8-16 Hex Flange Lock ROD, Support HAIRPIN, Clip WELDMENT, Bagger Brace, RH Side WELDMENT, Bagger Brace, LH Side BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR NUT, 5/16-18 Hex Flange Lock CATCHER BRACE, Center, 2 Bag Bobcat SCREW, 3/8-16 x 1-1/4" Hex Head Cap WASHER, 3/8" Flat NUT, 3/8-16 Hex Flange Lock ROD, Bagger Brace Locking HAIRPIN, Cotter Ref Twin Bag Catcher Kit

24 4 illustrated parts list - TRIPLE BAG CATCHER, 3-B

25 4 illustrated parts list - TRIPLE BAG CATCHER, 3-B Item Part No. Qty. Description ASSEMBLY, Cover & Screen SCREW, 1/4-20 x 3/4" Hex Head Cap, GR SCREW, 1/4-20 x 5/8" Hex Head Cap, GR5 2a NUT, 1/4-20 Hex Flange, GR WELDMENT, Hinge 3a STIFFENER, Hinge POP RIVET, 3/16 x.565 Aluminum WASHER, Rivet.188 (.20 I.D. x.500 O.D.) CLIP, Canoe * 1 DECAL, Safety, Grass Bag CLAMP SCREEN, Catcher CLAMP, Seal SEAL, Catcher Top ANGLE, Screen HOSE CLAMP, Lower, Fast Vac HOSE, Snapper Fast Vac HOSE CLAMP, Upper HOOP, Grass Bag NUT, 5/16-18 Hex Nyloc SCREW, 5/16-18 x 1" Hex Head Cap, GR WELDMENT, Hose Adapter SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap WASHER, 5/16" Flat DEFLECTOR, Grass Bag ASSEMBLY, Channel WELDMENT, Backplate COVER, Backplate NUT, 5/16-18 Hex Flange Lock SCREW, 5/16-18 x 3/4" Hex Head Cap, GR HINGE HINGE PIN, 3/8 x 2-3/4" HAIR PIN,.093 Dia RIVET SEAL, Catcher Top KNOB STRAP, Rubber NUT, #10-32 Hex Nyloc

26 4 illustrated parts list - TRIPLE BAG CATCHER, 3-B (cont d)

27 4 illustrated parts list - TRIPLE BAG CATCHER, 3-B (cont d) SCREW, #10-32 x 1-1/2 Hex Washer Head Machine w/nylon Patch WASHER,.19 x.38 x.06 Flat COVER, Support GRASS BAG BOLT, 5/16-18 x 3/4" Square Neck Carriage, GR HANGER, Grass Bag WASHER, 5/16" Split Lock NUT, 5/16-18 Hex, GR5 or B CLAMP, Grass Bag TUBE CLIP, Grass Bag WELDMENT, Cover Handle SCREW, 8-32 x 1/2" Cross Recess Pan Head WASHER, #8 External Tooth Lock NUT, #8-32 Hex Ref Triple Bag Catcher Kit

28 4 illustrated parts list - TRIPLE BAG CATCHER, 3B: MOUNT GROUP

29 4 illustrated parts list - TRIPLE BAG CATCHER, 3B: MOUNT GROUP Item Part Number Qty Description WELDMENT, Catcher Support BOLT, 5/16-18 x 3/4" Square Neck Carriage, GR BOLT, 5/16-18 x 1-1/4" Square Neck Carriage NUT, 5/16-18 Hex Flange Lock NUT, 5/16-18 Hex Flange Lock WELDMENT, Cover Latch Arm BOLT, 5/16-18 x 3/4" Square Neck Carriage, GR NUT, 5/16-18 Hex Flange Lock WELDMENT, Bumper Mount Plate SCREW, 3/8-16 x 2-1/2" Hex Head Cap, GR BAR, Clamp NUT, 3/8-16 Hex Flange Lock SCREW, 3/8-16 x 1-3/4" Hex Head Cap, GR REINFORCEMENT, Bumper WASHER, 3/8" Flat 15a NUT, 3/8-16 Hex Nyloc HITCH ROD HAIRPIN, Clip BAGGER BRACE, RH Side, Model 3-B BAGGER BRACE, LH Side, Model 3-BD BAGGER BRACE, LH Side, Model 3-B BAGGER BRACE, LH Side, Model 3-BD BOLT, 5/16-18 x 3/4" Square Neck Carriage, GR NUT, 5/16-18 Hex Flange Lock BAGGER BRACE, Center SCREW, 3/8-16 x 1-1/4" Hex Head Cap, GR WASHER, 3/8" Flat NUT, 3/8-16 Hex Flange Lock PIN, Bagger Brace Locking HAIRPIN, Cotter Ref Triple Bag Catcher Kit

30 4 illustrated parts list - WEIGHT BAR GROUP, 48-WB, 52-WB, 61-WB

31 4 illustrated parts list - WEIGHT BAR GROUP, 48-WB, 52-WB, 61-WB Item Part No. Qty. Description CHANNEL, Weight Mount, 48" Bobcat CHANNEL,Weight Mount, 52" Bobcat CHANNEL, Weight Mount, 61" Bobcat BAR, Clamp SCREW, 3/8-16 x 3-1/4" Hex Head Cap, G NUT, 3/8-16 Hex Top Lock WEIGHT BAR, 48" & 52" Bobcat WEIGHT BAR, 61" Bobcat SCREW, 1/2-13 x 3-1/2 Hex Head Cap SCREW, 1/2-13 x 3" Hex Head Cap NUT, 1/2-13 Hex Flange Lock PAD, Anti-Skid, Weight Kit Ref Weight Bar Kit, 48-V Ref Weight Bar Kit, 52-V Ref Weight Bar Kit, 61-WB

32 4 illustrated parts list - DECAL GROUP

33 4 illustrated parts list - DECAL GROUP Item Part Number Qty. Description DECAL, Fast-Vac DECAL, Safety, Grass Bag DECAL, Danger, Fast-Vac DECAL, Warning, Fast-Vac DECAL, Warning, Fast-Vac

34 NOTES

35 NOTES

36 warranty GIANT-VAC, INC., here-in-after called Giant-Vac, will warrant each new Giant-Vac product to be free from manufacturing defects in normal service for a period of two (2) years for consumer use, one (1) year for commercial use, or thirty (30) days for rental use. This warranty extends only to the original purchaser of the product and cannot be transferred. This warranty does not apply to engines, tires or other items that are purchased by Giant-Vac and warranted by the manufacturer of such items. Items such as bags, grass catchers, hoses and blades are not warranted, as these are considered expendable items. This warranty does not include equipment failures due to normal wear. Any obligation under this warranty is expressly limited to the replacement or repair, at an authorized servicing Giant-Vac dealer, or at a point designated by us, of such parts as appear to us to have been defective. All defective parts have to be returned freight prepaid before credit will be issued. We shall not be liable for transportation charges in connection with the replacement or repair of defective parts. This warranty does not apply to a Giant-Vac upon which repairs or alterations have been made by others except with our prior written approval. We shall not be liable for consequential damages or contingent liabilities for the fitness of any Giant-Vac for any particular purpose. We make no other express, implied or statutory warranty, nor is anyone authorized to make any in our behalf. Manual (I.R. 2/27/04) COPYRIGHT 2004 ALL RIGHTS RESERVED P.O. BOX 777 McDonough, GA

Model 16Z. Front-Mount Leaf Blower ASSEMBLY INSTRUCTIONS OPERATOR'S MANUAL PARTS LIST. Models covered: 16Z

Model 16Z. Front-Mount Leaf Blower ASSEMBLY INSTRUCTIONS OPERATOR'S MANUAL PARTS LIST. Models covered: 16Z ASSEMBLY INSTRUCTIONS OPERATOR'S MANUAL PARTS LIST Leaf Buster Front-Mount Leaf Blower Model 16Z Models covered: 16Z Actual product may differ slightly from product pictured above 1 preliminaries Congratulations!

More information

MODELS 58, 903. Intake Hose Kit for LBC Series 1 Walk- Behind Leaf Blowers For Leaf Blower models: LBC55151BV LBC915751BV

MODELS 58, 903. Intake Hose Kit for LBC Series 1 Walk- Behind Leaf Blowers For Leaf Blower models: LBC55151BV LBC915751BV INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS PARTS LIST Intake Hose Kit for LBC Series 1 Walk- Behind Leaf Blowers For Leaf Blower models: LBC55151BV LBC915751BV MODELS 58, 903 Actual product may differ

More information

THE GIANT-VAC PTO BLOWER MODELS 2000*/3200**/4000***

THE GIANT-VAC PTO BLOWER MODELS 2000*/3200**/4000*** THE GIANT-VAC PTO BLOWER MODELS 2000*/3200**/4000*** Congratulations! ASSEMBLY INSTRUCTIONS AND OPERATOR S MANUAL You have just purchased one of the finest pieces of outdoor power equipment on the market

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Collection System 966406901 CAUTION BEFORE ASSEMBLING GRASS CATCHER TO MOWER Set parking brake. Place motion control levers in NEUTRAL position. Turn ignition key OFF and remove

More information

5-Yard Self -Contained Truck Loader

5-Yard Self -Contained Truck Loader ASSEMBLY INSTRUCTIONS OPERATOR S MANUAL PARTS LIST 5-Yard Self -Contained Truck Loader Models covered: TLR20520KH R0207.1 1 preliminaries Congratulations! You have just purchased one of the finest pieces

More information

MODEL LBC915751BV. Walk-Behind Leaf Blower Series 1 ASSEMBLY INSTRUCTIONS OPERATOR S MANUAL PARTS LIST. Manual No /22/04 (P/N )

MODEL LBC915751BV. Walk-Behind Leaf Blower Series 1 ASSEMBLY INSTRUCTIONS OPERATOR S MANUAL PARTS LIST. Manual No /22/04 (P/N ) ASSEMBLY INSTRUCTIONS OPERATOR S MANUAL PARTS LIST Walk-Behind Leaf Blower Series 1 MODEL LBC915751BV Actual product may differ slightly from product pictured above (P/N 3085651) GIANT-VAC COPYRIGHT 2004

More information

THE GIANT-VAC GIANT-BLO JR. MODEL 52

THE GIANT-VAC GIANT-BLO JR. MODEL 52 THE GIANT-VAC GIANT-BLO JR. MODEL 52 Congratulations! OPERATOR S MANUAL You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared for, your Giant-Vac

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual 48" Collection System 966792801 CONGRATULATIONS on the purchase of a new collection system. It has been designed, engineered and manufactured to give you the best possible dependability

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Blower Kit 42" Collection System 966529101 2010 HTC. All Rights Reserved. Beatrice, NE. Printed in U.S.A. CONTENTS SAFETY RULES...4 ASSEMBLY...6 OPERATION...10 TIPS FOR IMPROVED

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Collection System 966406901 CAUTION BEFORE ASSEMBLING GRASS CATCHER TO MOWER Set parking brake. Place motion control levers in NEUTRAL position. Turn ignition key OFF and remove

More information

Collection System Operators Manual Model: Parts Manual

Collection System Operators Manual Model: Parts Manual Collection System Operators Manual Model: 113706 Parts Manual Please read these instructions carefully and make sure you understand them before using the machine. MANUAL NO. 539 113763 REV 01 (09/18/06)

More information

Safety Instructions, Installation & Operator s Manual For

Safety Instructions, Installation & Operator s Manual For Safety Instructions, Installation & Operator s Manual For #6-3173 TWIN BAG GRASS CATCHER KIT FOR 38 YARD CRUISERS SERIES 2 MODEL YZ145382BVE IMPORTANT! THIS KIT NOT INTENDED FOR USE ON ANY SERIES OF HZ/HZS

More information

THE GIANT-VAC WHISPER JET BLOWER MODELS 60-BWJ 85-KWJ 85-KWJT 90-HWJ 10-BWJ - 11-BWJ 12-KWJ - 16-BWJ

THE GIANT-VAC WHISPER JET BLOWER MODELS 60-BWJ 85-KWJ 85-KWJT 90-HWJ 10-BWJ - 11-BWJ 12-KWJ - 16-BWJ THE GIANT-VAC WHISPER JET BLOWER MODELS 60-BWJ 85-KWJ 85-KWJT 90-HWJ 10-BWJ - 11-BWJ 12-KWJ - 16-BWJ OPERATOR S MANUAL Congratulations! You have just purchased one of the finest pieces of outdoor power

More information

SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER

SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER MODELS: 970338 2 BAG CATCHER, 36 970339 2 BAG CATCHER, 42 970340 2 BAG CATCHER, 48 970341 2 BAG CATCHER, 52 WARNING: If incorrectly used this machine can

More information

THE GIANT-VAC TAILGATE TRUCK LOADER

THE GIANT-VAC TAILGATE TRUCK LOADER THE GIANT-VAC TAILGATE TRUCK LOADER Model TLG131651BVG OPERATOR S MANUAL Congratulations! You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared

More information

series Truck Loader

series Truck Loader ASSEMBLY INSTRUCTIONS OPERATOR S MANUAL PARTS LIST 1601-2501 series Truck Loader Actual product differs from product pictured above Models covered: 1601SKID 1601CHW 1901SKID 1901CHW 2501SKID 2501CHW GVTP

More information

20hp & 25hp Series Truck Loader

20hp & 25hp Series Truck Loader ASSEMBLY INSTRUCTIONS OPERATOR S MANUAL PARTS LIST 20hp & 25hp Series Truck Loader Actual product differs from product pictured above Models covered: TL20201KH TL25201KH TLS20201KH TLS25201KH R0207.1 1

More information

OPERATOR S MANUAL FABRIC 3-BAG GRASS CATCHER PART NO PRINTED 8/2012 PRINTED IN USA

OPERATOR S MANUAL FABRIC 3-BAG GRASS CATCHER PART NO PRINTED 8/2012 PRINTED IN USA OPERATOR S MANUAL FABRIC -BAG GRASS CATCHER Models: GC-STC-V This manual contains the operating instructions and safety information for your Scag mower accessory. Reading this manual can provide you with

More information

42" ROUGH CUT TRAILMOWER

42 ROUGH CUT TRAILMOWER OWNERS MANUAL Model No. 45-03625 42" ROUGH CUT TRAILMOWER CAUTION: Read Rules for Safe Operation and Instructions Carefully IMPORTANT: BATTERY REQUIRED!! The battery is NOT included with the deck but must

More information

Collection System / DFS PZ

Collection System / DFS PZ Collection System 967024401 / DFS PZ Please read the operator s manual carefully and make sure you understand the instructions before using the machine. CAUTION BEFORE ASSEMBLING GRASS CATCHER TO MOWER

More information

KING COBRA/CALIBER GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL

KING COBRA/CALIBER GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL KING COBRA/CALIBER GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL GRASS CATCHER W/WEIGHTS: TUBE KITS: BLOWER KITS: 52 542128 52 542119 5101002 60 542129 60 542120 5101003 2 WORLDLAWN POWER EQUIPMENT

More information

THE GIANT-VAC GIANT THATCHER MODELS 55GT 55GTH 91GT

THE GIANT-VAC GIANT THATCHER MODELS 55GT 55GTH 91GT THE GIANT-VAC GIANT THATCHER MODELS 55GT 55GTH 91GT ASSEMBLY GUIDE AND OPERATOR S MANUAL As you unpack your Giant-Thatcher power unit, you will find the following parts: 1 - Power unit with motor, thatcher

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Blower Kit Collection System 539 13 23-98 MZ (966 00 45-01 Combined with 960 73 00-19 EZ) 2008 HTC. All Rights Reserved. Beatrice, NE. Printed in U.S.A. TABLE OF CONTENTS SAFETY

More information

44 and 52 Twin Bagger 100 Series Z Master

44 and 52 Twin Bagger 100 Series Z Master Form No. 7 87 and 5 Twin Bagger 00 Series Z Master Model No. 7855 Serial No. 000000 and Up Operator s Manual English (CE) Contents Page Introduction................................ Safety.....................................

More information

DIAMONDBACK/EDGE GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL

DIAMONDBACK/EDGE GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL DIAMONDBACK/EDGE GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL GRASS CATCHER W/WEIGHT: TUBE KIT: BLOWER KIT: 48 5101305 632093 632078 52 5101305 542119 632074 60 632086 542120 632081 3 WORLDLAWN POWER

More information

20hp & 29hp Series Truck Loader

20hp & 29hp Series Truck Loader ASSEMBLY INSTRUCTIONS OPERATOR S MANUAL PARTS LIST 20hp & 29hp Series Truck Loader Actual product differs from product pictured above Model No. Description 3800004 TLS20201KH 3800005 TL20201KH 3800021

More information

DFS Vac Collection System 400 Series Z Master

DFS Vac Collection System 400 Series Z Master Form No. 0 DFS Vac Collection System 00 Series Z Master Model No. 780 Serial No. 000000 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN/GB) Contents Page Introduction................................

More information

GRASS CATCHER PART S & OPERATORS MANUAL

GRASS CATCHER PART S & OPERATORS MANUAL GRASS CATCHER PART S & OPERATORS MANUAL WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWN.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103 2 3 4 OPERATORS MANUAL This catcher manual is for

More information

Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number:

Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number: Operator s Manual R WYZ48/52/60CS BAGGER Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE 68310 Toll Free Number: 1-800-267-4255 OPERATOR S MANUAL This catcher manual is for

More information

Z9 Commercial Collection System Operator and Parts Manual

Z9 Commercial Collection System Operator and Parts Manual Z9 Commercial Collection System Operator and Parts Manual Models: Z9A Manual No. 200897 Rev. 02 (10-30-03) Please read these instructions carefully and make sure you understand them before using the machine.

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 470-/H/PRO/IC Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 11-11-11 SAFETY RULES Remember, any power equipment can cause injury if

More information

OPERATOR S MANUAL MODEL GC-STC-V

OPERATOR S MANUAL MODEL GC-STC-V MODEL GC-STC-V THIS MANUAL CONTAINS THE OPERATING INSTRUCTIONS AND SAFETY INFORMA- TION FOR YOUR SCAG ACCESSORY. READ- ING THIS MANUAL WILL PROVIDE YOU WITH MAINTENANCE AND ADJUSTMENT PROCEDURES TO KEEP

More information

44 RUGGED CUT TRAILMOWER

44 RUGGED CUT TRAILMOWER OWNER S MANUAL MODEL NO. RT10544 RT80044 44 RUGGED CUT TRAILMOWER Rev. 12.10.99 Assembly Operation Service and Adjustment Repair Parts 1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093 PHONE

More information

Mini Skid Steer Training

Mini Skid Steer Training Safe Operating Practices Mini Skid Steer Training This product is capable of amputating hands and feet. Always follow all safety instructions to avoid serious injury or death. Engine exhaust contains carbon

More information

Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting Warranty. Twin Bagger 19A30014OEM

Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting Warranty. Twin Bagger 19A30014OEM Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting Warranty Operator s Manual Twin Bagger 19A30014OEM WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

More information

OPERATOR S MANUAL CLAM SHELL GRASS CATCHER PART NO PRINTED 2/2012 PRINTED IN USA

OPERATOR S MANUAL CLAM SHELL GRASS CATCHER PART NO PRINTED 2/2012 PRINTED IN USA OPERATOR S MANUAL CLAM SHELL GRASS CATCHER Models: GC-STC-CSV Congratulations on owning a Scag mower! This manual contains the operating instructions and safety information for your Scag mower accessory.

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 1080 Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 08-02-16 SAFETY RULES Remember, any power equipment can cause injury if operated

More information

Air Cushion Hover Mower

Air Cushion Hover Mower Air Cushion Hover Mower OPERATOR S MANUAL Model RC190-GCV160 Introduction Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage.

More information

52 inch Twin Bagger and Finishing Kit 200 Series Z Master

52 inch Twin Bagger and Finishing Kit 200 Series Z Master Form No. 9 68 inch Twin Bagger and Finishing Kit 00 Series Z Master Model No. 7898 Serial No. 000000 and Up Model No. 780 Operator s Manual English (EN) Contents Page Introduction................................

More information

Model 858-RH. Operating and Assembly Manual. Palmor Products Inc Serum Plant Road Thorntown, IN 46071

Model 858-RH. Operating and Assembly Manual. Palmor Products Inc Serum Plant Road Thorntown, IN 46071 Model 5-RH Operating and Assembly Manual Palmor Products Inc. 55 Serum Plant Road Thorntown, IN 6071 3/31/015 SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the

More information

OPERATOR S MANUAL MODEL GC-SFZ

OPERATOR S MANUAL MODEL GC-SFZ R Made in the USA by MODEL GC-SFZ THIS MANUAL CONTAINS THE OPERATING INSTRUCTIONS AND SAFETY INFORMA- TION FOR YOUR SCAG ACCESSORY. READ- ING THIS MANUAL WILL PROVIDE YOU WITH MAINTENANCE AND ADJUSTMENT

More information

THE GIANT-VAC Self-Contained Truck Loader MODEL TLR KH & TLR W

THE GIANT-VAC Self-Contained Truck Loader MODEL TLR KH & TLR W THE GIANT-VAC Self-Contained Truck Loader MODEL TLR2510201KH & TLR3510251W OPERATOR S MANUAL Congratulations! You have just purchased one of the finest pieces of outdoor power equipment on the market today.

More information

THE FINISHING TOUCH 42 FINISH CUT MOWER SELF PROPELLED WALK BEHIND

THE FINISHING TOUCH 42 FINISH CUT MOWER SELF PROPELLED WALK BEHIND Visit us at: www.swisherinc.com OWNER S MANUAL STARTING SERIAL #: L105-074001 MODEL NO. WB11542F Rev. Important! Read and follow all Safety Rules and Instructions before operating this equipment. THE FINISHING

More information

RC190-GCV160 RC190-BS550

RC190-GCV160 RC190-BS550 19 Hover Mower OPERATOR S MANUAL P O W E R E D B Y Models RC190-GCV160 RC190-BS550 California Trimmer 1028 4 th St. SW, Bldg. A Auburn, Washington 98001 CalTrimmer.com Introduction Read this information

More information

Model 462 IC/H/PRO/EL. Operating and Assembly Manual Midwest Equipment Manufacturing, Inc Serum Plant Road Thorntown, IN

Model 462 IC/H/PRO/EL. Operating and Assembly Manual Midwest Equipment Manufacturing, Inc Serum Plant Road Thorntown, IN Model 462 IC/H/PRO/EL Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 03-08-12 SAFETY RULES Remember, any power equipment can cause injury

More information

Twin Rear Bagger Model 19A

Twin Rear Bagger Model 19A Operator s Manual Twin Rear Bagger Model 19A30003100 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS

More information

Quiet Collector. Model No & Up

Quiet Collector. Model No & Up FORM NO. -8GB Rev A Quiet Collector Model No. 795-890000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety and the safety

More information

OPERATOR S MANUAL. Operator Controlled Discharge Chute STT-OCDC-61V Scag Power Equipment Division of Metalcraft of Mayville, Inc.

OPERATOR S MANUAL. Operator Controlled Discharge Chute STT-OCDC-61V Scag Power Equipment Division of Metalcraft of Mayville, Inc. OPERATOR S MANUAL Operator Controlled Discharge Chute Models: STT-OCDC-52V STT-OCDC-61V This manual contains the operating instructions, assembly instructions and safety information for your Scag accessory.

More information

Table of Contents. Safety symbols... 3 Assembly 6. Operation Maintenance Troubleshooting 11. Storage. 12. Notes. 13

Table of Contents. Safety symbols... 3 Assembly 6. Operation Maintenance Troubleshooting 11. Storage. 12. Notes. 13 Table of Contents Safety symbols... 3 Assembly 6 Operation... 8 Maintenance... 10 Troubleshooting 11 Storage. 12 Notes. 13 2 Safety Information Attention; this machine can be dangerous! All operators should

More information

GHG190-GCV160 GHG190-BS550

GHG190-GCV160 GHG190-BS550 19 Hover Mower OPERATOR S MANUAL P O W E R E D B Y Models GHG190-GCV160 GHG190-BS550 Greenman Golf & Turf Solutions 1028 4 th St. SW, Bldg. A Auburn, Washington 98001 GreenmanGolfTurf.com Introduction

More information

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions...

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions... TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions & Safety Sign Locations... 2 Operating Instructions... 3 Assembly Instructions... 5 500 & 600 Snowblower Drawings... 8 500 & 600 Snowblower

More information

Collection System. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

Collection System. Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Collection System 967004601 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. 2012 All rights reserved. Swainsboro, GA. Printed in U.S.A.

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 380/385-IC/385-LH Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 2-0916 SAFETY RULES Remember, any power equipment can cause injury

More information

WARRANTY REGISTRATION AND POLICY

WARRANTY REGISTRATION AND POLICY WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material

More information

Owner s Manual. ATV ACCESSORIES Sold as Separate Pieces!!!! Plow Blade 2645 MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945

Owner s Manual. ATV ACCESSORIES Sold as Separate Pieces!!!! Plow Blade 2645 MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual 2643 2646 Plow Blade 2645 2644 2645 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment.

More information

EUROPEAN REAR ENGINE RIDER SERIES 20

EUROPEAN REAR ENGINE RIDER SERIES 20 Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,

More information

Owner s Manual ATV ACCESSORIES MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Model Numbers Receiver Hitch Plow Blade 2140

Owner s Manual ATV ACCESSORIES MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Model Numbers Receiver Hitch Plow Blade 2140 MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual Model Numbers Receiver Hitch 10260 Plow Blade 2140 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 462-ZIC/ZH/ZPRO Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 12-14-16 SAFETY RULES Remember, any power equipment can cause injury

More information

THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: GC-2B

THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: GC-2B ILLUSTRATED PARTS IPLMANUAL 0 0 FABRIC -BAG GRASS CATCHER Model GC-B THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: GC-B with a serial number of M0000 to M 0 Scag Power Equipment Division

More information

Quiet Collector. Model No & Up

Quiet Collector. Model No & Up FORM NO. -0 Quiet Collector Model No. 79-990000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety and the safety of others.

More information

Model 452-DIC/DH. Operating and Assembly Manual

Model 452-DIC/DH. Operating and Assembly Manual . Model 452-DIC/DH Operating and Assembly Manual Palmor Products Inc. 5225 Serum Plant Road Thorntown, IN 46071 02-14-12 SAFETY RULES Remember, any power equipment can cause injury if operated improperly

More information

REAR ENGINE RIDER EUROPEAN SERIES 22

REAR ENGINE RIDER EUROPEAN SERIES 22 Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING...4,

More information

MODEL x8A F L BUILT IN THE

MODEL x8A F L BUILT IN THE MODEL 425001x8A BUILT IN THE TABLE OF CONTENTS WARRANTY...................................... 2 RESPONSIBILITY OF THE OWNER................. 3 SAFETY RULES.................................. 3 INTERNATIONAL

More information

Commercial Pro Plow Combo, 50" ATV

Commercial Pro Plow Combo, 50 ATV CHANGING YOUR LANDSCAPE SINCE 1945 swisherinc.com OWNER S MANUAL 19975 Starting Serial #: L215-001001 Commercial Pro Plow Combo, 50" ATV IMPORTANT Read and follow all Safety Precautions and Instructions

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 455-IC/PRO/H Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 03-08-12 SAFETY RULES Remember, any power equipment can cause injury if

More information

Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV

Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO

More information

BAD BOY GRASS BAGGING SYSTEM

BAD BOY GRASS BAGGING SYSTEM BAD BOY GRASS BAGGING SYSTEM TABLE OF CONTENTS WILL FIT ALL 2019 OUTLAW SERIES MOWERS SAFETY RULES AND INFORMATION.. 2 GENERAL OPERATION.... 3 WARRANTY INFORMATION.... 5 INSTALLATION INSTRUCTIONS.. 6 PAGE

More information

Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODELS MOWER MODELS SPE140KW SPE151KW SPEL150KH

Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODELS MOWER MODELS SPE140KW SPE151KW SPEL150KH Parts Manual for MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODELS SPE1250KW SPE131KW SPE140KW SPE150KH SPE151KW SPEL150KH MOWER MODELS SPE360 SPE361 SPE481 McDonough, GA, 30253 U.S.A. COPYRIGHT

More information

RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0

RZT TWIN STICK HYDRO DRIVE 250 Z 44 & 50 SERIES 0 Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 455-IC/PRO/H Operating and Assembly Manual Palmor Products Inc. 5225 Serum Plant Road Thorntown, IN 46071 03-08-12 SAFETY RULES Remember, any power equipment can cause injury if operated improperly

More information

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES G Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,

More information

LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"

LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES G Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.

More information

Triple Rear Bagger 19A

Triple Rear Bagger 19A Operator s Manual Triple Rear Bagger 9A300800 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS

More information

OPERATOR S MANUAL. Operator Controlled Discharge Chute

OPERATOR S MANUAL. Operator Controlled Discharge Chute Operator Controlled Discharge Chute Models: STC/STCII/SCZ-OCDC-48V STC/STCII/SCZ-OCDC-52V STC/STCII-OCDC-61V STT-STTII-OCDC-52V SCZ/STT/STTII-OCDC-61V SVR-OCDC-48V SVR-OCDC-52V SVR-OCDC-61V OPERATOR S

More information

MODEL x8A F L BUILT IN THE

MODEL x8A F L BUILT IN THE MODEL 425600x8A BUILT IN THE TABLE OF CONTENTS WARRANTY...................................... 2 RESPONSIBILITY OF THE OWNER................. 3 SAFETY RULES.................................. 3 INTERNATIONAL

More information

Operator s Manual. Printed In USA. Form No (February 12, 2014) CUB CADET LLC, P.O. BOX CLEVELAND, OHIO

Operator s Manual. Printed In USA. Form No (February 12, 2014) CUB CADET LLC, P.O. BOX CLEVELAND, OHIO Operator s Manual IMPORTANT: This kit (19A70046100) is required and must first be installed on all ZF-L (Lap Bar) tractors before the 19A70040100 triple bagging kit can be installed. (ZFL) Z-Force L Bagger

More information

Walk-Behind Lawn Mowers

Walk-Behind Lawn Mowers Walk-Behind Lawn Mowers Parts Manual Models 171 LM21 16 LM21S 17 LM21SW 04502100 / Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.

More information

MODEL x8C RECORD THE FOLLOWING INFORMATION ABOUT YOUR UNIT. THIS INFORMATION IS NECESSARY WHEN ORDERING PARTS OR IN CASE OF LOSS OR THEFT.

MODEL x8C RECORD THE FOLLOWING INFORMATION ABOUT YOUR UNIT. THIS INFORMATION IS NECESSARY WHEN ORDERING PARTS OR IN CASE OF LOSS OR THEFT. This Instruction Book contains information for several models. Read and keep this book for future reference. This book contains important information on SAFETY, PREPARATION, OPERATION, AND MAINTENANCE.

More information

Walk-Behind Lawn Mowers

Walk-Behind Lawn Mowers Walk-Behind Lawn Mowers Parts Manual Models 160 - LM21 182 - LM21 18 - LM21S 184 - LM21SW 04056800 6/10 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied

More information

ZT XL & Zoom XL Bagger

ZT XL & Zoom XL Bagger ZT XL & Zoom XL Bagger Owner/Operator & Parts Manual Model 815154 Bagger (SN 00101 +) 04723300 9/13 Printed in USA TABLE OF CONTENTS SAFETY................................... 3 STORAGE.................................20

More information

OPERATOR S MANUAL. Operator Controlled Discharge Chute

OPERATOR S MANUAL. Operator Controlled Discharge Chute Operator Controlled Discharge Chute Models: STC/STCII/SCZ-OCDC-48V STC/STCII/SCZ-OCDC-52V STC/STCII-OCDC-61V STT/STTII-OCDC-52V SCZ/STT/STTII-OCDC-61V SVR/SVRII-OCDC-48V SVR/SVRII-OCDC-52V SVR/SVRII-OCDC-61V

More information

Owner s Manual model x108B

Owner s Manual model x108B Owner s Manual model 385002x108B This Instruction Book contains information for several models. Read and keep this book for future reference. This book contains important information on SAFETY, ASSEMBLY,

More information

44-Inch & 48-Inch Bagger

44-Inch & 48-Inch Bagger 44-Inch & 48-Inch Bagger Owner/Operator & Parts Manual Model 892025 00382700D 6/08 Printed in USA TABLE OF CONTENTS Safety..................................... 3 Storage...................................20

More information

Model 462 IC/H/PRO/K/EL. Operating and Assembly Manual Palmor Products Inc Serum Plant Road Thorntown, IN

Model 462 IC/H/PRO/K/EL. Operating and Assembly Manual Palmor Products Inc Serum Plant Road Thorntown, IN Model 462 IC/H/PRO/K/EL Operating and Assembly Manual Palmor Products Inc. 5225 Serum Plant Road Thorntown, IN 46071 12-1-08 Model 462-IC/H/PRO/K/EL Key Part No. Description Qty. 1 46250 Frame, RH 1 46251

More information

SAFETY, ASSEMBLY, OPERATION AND MAINTENANCE. PRODUCT INFORMATION

SAFETY, ASSEMBLY, OPERATION AND MAINTENANCE. PRODUCT INFORMATION This Instruction Book Contains Information For Several Models. Read And Keep This Book For Future Reference. This Book Contains Important Information On: SAFETY, ASSEMBLY, OPERATION AND MAINTENANCE. PRODUCT

More information

Decals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. WARNING! Xxxx xxx xxxx xx xxxx x xxxx.

Decals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. WARNING! Xxxx xxx xxxx xx xxxx x xxxx. symbols and decals Xxxx xxx xxxx xx xxxx x xxxx. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader

More information

YARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4

YARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 Parts Manual for HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 MODEL HZS15423KVE HZS18483BVE YZ16424BVE YZ20484BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision

More information

Model 854/856. Operating and Assembly Manual. Midwest Equipment Manufacturing, Inc Serum Plant Road Thorntown, IN 46071

Model 854/856. Operating and Assembly Manual. Midwest Equipment Manufacturing, Inc Serum Plant Road Thorntown, IN 46071 Model 854/856 Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 55 Serum Plant Road Thorntown, IN 46071 10/10/2018 SAFETY RULES Remember, any power equipment can cause injury if operated

More information

MODEL 565CKG Operating and Assembly Manual Midwest Equipment Manufacturing, Inc Serum Plant Road Thorntown, IN 46071

MODEL 565CKG Operating and Assembly Manual Midwest Equipment Manufacturing, Inc Serum Plant Road Thorntown, IN 46071 MODEL 565CKG Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 11-20-14 SAFETY RULES Remember, any power equipment can cause injury if operated

More information

Large Frame Snowthrowers

Large Frame Snowthrowers INC. 0 9impliuilg Initial setup This Dealer Setup Instruction covers the following products: L1226E Models Mfg. No. Description 1695326 SMIL1226E, 11.5GT Snowthrower 1695324 SNL1226E, 11.5GT Snowthrower

More information

Reproduction. Not for. Zero-Turn Riding Mower. 400Z Series. Operator s Manual Rev -

Reproduction. Not for. Zero-Turn Riding Mower. 400Z Series. Operator s Manual Rev - Operator s Manual Zero-Turn Riding Mower 400Z Series Mfg. No. Description 5901253 400ZB2748, Snapper 400Z ANSI-EXP Zero-Turn Rider with 48 Mower 5104122 Rev - Thank you for purchasing this quality-built

More information

Twin Rear Bagger - Model No. 19A70005OEM

Twin Rear Bagger - Model No. 19A70005OEM Operator s Manual Twin Rear Bagger - Model No. 19A70005OEM WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE

More information

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL

More information

BrentChalmers.com. Owner Operation and Maintenance Manual ROTARY MOWER MODEL WISCONSIN,U.S.A. PORT ATTACHMENT 28 INCH WASHI~GTON,

BrentChalmers.com. Owner Operation and Maintenance Manual ROTARY MOWER MODEL WISCONSIN,U.S.A. PORT ATTACHMENT 28 INCH WASHI~GTON, ROTARY MOWER Owner Operation and Maintenance Manual ATTACHMENT 28 INCH MODEL 15100-01 (2) Do not allow children to operate powered equipment at any time. The average child is not capable of coping with

More information

North Dakota State University Grounds Maintenance Equipment

North Dakota State University Grounds Maintenance Equipment North Dakota State University Grounds Maintenance Equipment I. Introduction Grounds maintenance equipment is an important part of the work activities on NDSU campus. They can make grounds maintenance jobs

More information

Reproduction. Not for OPERATOR S MANUAL. Turbo Vacuum System. Model Description Turbo Vacuum Collection System (For 60 Mower Decks)

Reproduction. Not for OPERATOR S MANUAL. Turbo Vacuum System. Model Description Turbo Vacuum Collection System (For 60 Mower Decks) OPERATOR S MANUAL Turbo Vacuum System Model Description 1695759 Turbo Vacuum Collection System (For 60 Mower Decks) Copyright Briggs & Stratton Power Products Group, LLC Milwaukee, WI USA. All Rights Reserved.

More information

Reproduction. Not for OPERATOR S MANUAL. Adapter Kit ASSEMBLY. for Assembly of Snow Blade & Hitch unto RD Riders

Reproduction. Not for OPERATOR S MANUAL. Adapter Kit ASSEMBLY. for Assembly of Snow Blade & Hitch unto RD Riders ASSEMBLY OPERATOR S MANUAL Mfg. No. Adapter Kit for Assembly of 1696096 Snow Blade & Hitch unto RD Riders Description 885638 Adapter Kit for Snow Blade & Hitch Refer to this COMPLETE OPERATOR S MANUAL

More information

REAR ENGINE RIDER 42 MOWER SERIES 22

REAR ENGINE RIDER 42 MOWER SERIES 22 Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9

More information

OPERATOR S MANUAL CLAM SHELL GRASS CATCHER. PART NO Rev. 04 PRINTED 8/2016 PRINTED IN USA

OPERATOR S MANUAL CLAM SHELL GRASS CATCHER. PART NO Rev. 04 PRINTED 8/2016 PRINTED IN USA OPERATOR S MANUAL CLAM SHELL GRASS CATCHER Models: GC-CS This manual contains the operating instructions and safety information for your Scag mower accessory. Reading this manual can provide you with assistance

More information

Owner s Manual. ATV ACCESSORIES Sold as Separate Pieces!!!! Plow Blade Universal Mount 2646 Hitch Mount Fairllead Roller 8003

Owner s Manual. ATV ACCESSORIES Sold as Separate Pieces!!!! Plow Blade Universal Mount 2646 Hitch Mount Fairllead Roller 8003 Owner s Manual Plow Blade 2850 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. ATV ACCESSORIES Sold as Separate Pieces!!!! Universal Mount 2646 Hitch

More information