PARTS BOOK ROTARY HEADS 60 ROTATOR, RIGHT BOOM MOUNT

Transcription

1 PARTS BOOK ROTARY HEADS 60 ROTATOR, RIGHT BOOM MOUNT DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD FOR WARRANTY CALL DIAMOND MOWERS DIRECT: OUR TECHNICIANS WILL DIAGNOSE YOUR SITUATION OVER THE PHONE TO GET YOU UP AND RUNNING QUICKLY. Phone: Fax: DIAMOND MOWERS, LLC

2 Page 2 Foreword This manual contains the parts breakdown and identification of the various components and structures that make up your mower implement. The illustrations, drawings, and diagrams in this manual are based on the latest information available at the time of publication. Your machine may have product improvements and features not yet contained in this parts manual. Diamond Mowers, LLC reserves the right to make changes at any time without notice or obligation. Diamond Mowers, LLC and Wetblade are trademarks of Diamond Mowers, LLC. This manual should be consulted prior and while assembling the unit, and anytime parts or assembly clarification is needed. Copyright 2016 Diamond Mowers, LLC All rights reserved. While every precaution has been taken in the preparation of this manual, the publisher assumes no responsibility for errors or omissions. No part of this book covered by the copyrights heron may be reproduced or copied in any form or by any means graphic, electronic, or mechanical, including photocopying, taping, or information storage and retrieval systems without written permission of the publisher.

3 Page 3 Table of Contents ROTARY HEADS 4 BOOM ROTARY HEAD - 60 DIRECT DRIVE, ROTATING DECK, RIGHT MOUNT 5 BOOM ROTARY HEAD - 60 BLADE CONFIGURATIONS 6 HYDRAULIC TRAPDOOR (OPTIONAL) - BOOM ROTARY HEADS 60 8 DECK ROTATOR (OPTIONAL) - BOOM ROTARY HEADS 60 9 DRIVE ASSEMBLIES 10 DRIVE ASSEMBLY - 60 ROTARY MOWER (WHEEL LOADER POWERED BOOM ONLY) 11 DECK ASSEMBLIES MOTOR ASSEMBLY MOTOR ASSEMBLY DIRECT DRIVE SPINDLE 15 LIFT ASSEMBLIES X18 WELDED CYLINDER X8 TIE-ROD CYLINDER 18

4 ROTARY HEADS

5 ROTARY HEADS Page 5 BOOM ROTARY HEAD - 60 DIRECT DRIVE, ROTATING DECK, RIGHT MOUNT 1 3/8 LOCK WASHER /16 FLAT WASHER /8 H.S. LOCK WASHER /4 X 3/4 NC HEX CAP /8 SAE H.S. FLAT WASHER /8 X 1-1/4 NC HEX CAPSCREW /4 NC NYLOCK NUT /8 X 2-1/4 NF H.S. HEX CAPSCREW BLADE BOLT - HEX BASE PLOW BOLT /8 X 4 NF H.S. HEX CAPSCREW /8 NC HEX NUT /8 H.S. NF SLOTTED HEX NUT /8 H.S. NF STOVER NUT /4 X 2 ROLL PIN /32 X 1 ROLL PIN X 18 CYLINDER FLAP (LARGE) FLAP (SMALL) /2ADJ-OR X 1/2FPX-90DEG, ADAPTER #20 FLANGE KIT HOSE 1/4 X 77 (1/2MP X 5/16MJIC) HOSE 3/8 X 62 (3/8FJIC-90DEG X 1/2MJIC) HOSE 1 X 65 (1FJIC X #20FLG-90DEG) HOSE 1 X 57 (1FJIC X #20FLG-90DEG) /8" BRUSH BLADE /4-28 GREASE ZERK BOLT PROTECTOR " BOOM DECK DISH " PIVOT DECK 30' BOOM CLEVIS PIN, 1 X 3-1/ MOTOR 365" 2-1/4" GEARS, SPLINE SHAFT (Excluding wheel loader-powered booms.) 33 BUSHING, 1-1/4 X 1 X MAST SPACER, 3/4" SPINDLE ASSEMBLY TORSION SPRING FRONT SHIELD REAR SHIELD TRAP DOOR ROD, REAR TRAP DOOR ROD, FRONT FLAP BAR (LARGE) FLAP BAR (SMALL) MAST SKID SHOE MOTOR BOLT LOCK TAB MOTOR BOLT LOCK BASE /2-20 X 1-3/4 H.S. NF HEX CAP GR ADAPTER, 1/4MOR X 3/8MJIC BLADE KIT (Includes 5, 9, 13, 15, & 26)

6 ROTARY HEADS Page 6 BOOM ROTARY HEAD - 60 BLADE CONFIGURATIONS 1 1-1/8 H.S FLAT WASHER BLADE MOUNTING BOLT BLADE MOUNTING NUT ROLLPIN KNIFE * 1/2" GRASS BLADE ** 1/2" GRASS BLADE (HIGH SUCTION) " TRI-HEX DISH REPLACEABLE HEX INSERT Avail BLADE MOUNTING BOLT BLADE MOUNTING NUT KNIFE * 1/2" GRASS BLADE ** 1/2" GRASS BLADE (HIGH SUCTION) BLADE DISH REPLACEABLE INSERT Avail BLADE MOUNTING BOLT BLADE MOUNTING NUT KNIFE * 1/2" GRASS BLADE ** 1/2" GRASS BLADE (HIGH SUCTION) BLADE DISH

7 ROTARY HEADS Page 7 BOOM ROTARY HEAD - 60 BLADE CONFIGURATIONS 1 1-1/8 H.S FLAT WASHER BLADE MOUNTING BOLT BLADE MOUNTING NUT ROLLPIN KNIFE * 50" BRUSH KNIFE - 1/2" ** 50" GRASS KNIFE, HIGH SUCTION - 1/2" *** 50" BRUSH BLADE - 5/8" **** 50" BI-DIRECTIONAL BLADE - 1/2" ***** 50" BRUSH KNIFE - REVERSE ROTATION - 5/8" '' BOOM DECK DISH REPLACEABLE HEX INSERT Avail /8 SAE H.S. FLAT WASHER KNIFE MOUNTING BOLT KNIFE MOUNTING NUT /4 X 2 ROLL PIN " BI-DIRECTIONAL BLADE BLADE BAR /8 H.S FLAT WASHER BLADE MOUNTING BOLT BLADE MOUNTING NUT ROLLPIN KNIFE * 1/2" GRASS BLADE ** 1/2" GRASS BLADE (HIGH SUCTION) "ROUND DISH, 2-3 BLADE REPLACEABLE HEX INSERT Avail

8 ROTARY HEADS Page 8 HYDRAULIC TRAPDOOR (OPTIONAL) - BOOM ROTARY HEADS /4 X 2 ROLL PIN /32 X 1 ROLL PIN X 8 CYLINDER /2ADJ-OR X 1/2FPX-90DEG, FITTING HOSE 1/4 X 77 (1/2MP X 5/16MJIC) HOSE 1/4 X 66 (1/2MP X 5/16MJIC) CLEVIS PIN, 1 X 3-1/ TRAP DOOR ROD, REAR HYDRAULIC SHIELD

9 ROTARY HEADS Page 9 DECK ROTATOR (OPTIONAL) - BOOM ROTARY HEADS 60 1 NYLON BUSHING /2 H.S. FLAT WASHER /8 H.S. LOCK WASHER /2 X 1-3/4 H.S. NC HEX CAPSCREW /2 X 2-1/4 NF FLAT HEAD SKT HD CAP /8 X 3 H.S. NF HEX CAPSCREW /2 NC NYLOCK NUT /2 NF NYLOCK NUT /8 H.S. NF STOVER NUT /4 X 2 ROLL PIN GREASE ZERK CLEVIS PIN PIVOT DECK BOLT-ON PLATE PIVOT DECK COVER PLATE BUSHING SHIM MAST PIVOT ARM PIVOT ARM - RIGHT (SHOWN) PIVOT ARM - LEFT

10 DRIVE ASSEMBLIES

11 DRIVE ASSEMBLIES Page 11 DRIVE ASSEMBLY - 60 ROTARY MOWER (WHEEL LOADER POWERED BOOM ONLY) 1 1/4 X 3/4 NC HEX CAP /4 NC NYLOCK NUT #20 FLANGE KIT HOSE 3/8 X 62 (3/8FJIC-90DEG X 1/2MJIC) HOSE 1 X 65 (1FJIC X #20FLG-90DEG) HOSE 1 X 57 (1FJIC X #20FLG-90DEG) * 7 MOTOR M365, 1-3/4" GEAR SET, 2-1/4" SECT, GAL/MIN M365, 2-1/4" GEAR SET, 2-3/4" SECT, GAL/MIN MOTOR BOLT LOCK TAB MOTOR BOLT LOCK BASE /2-20 X 1-3/4 H.S. NF HEX CAP GR ADAPTER, 1/4MOR X 3/8MJIC

12 DECK ASSEMBLIES

13 MOTOR ASSEMBLY DECK ASSEMBLIES Page 13 UNDER CONSTRUCTION

14 MOTOR ASSEMBLY DECK ASSEMBLIES Page 14 1 SNAP RING OUTBOARD BEARING BUSHING THRUST PLATE SEAL RETAINER M365 SEAL KIT Avail /4" M365 GEAR HOUSING SHAFT SEAL 150 PSI (included in M365 seal kit) PSI SHAFT END COVER CHECK ASSEMBLY ALIGNMENT BUSHING PORT END COVER STUD 4 Call 14 WASHER GEAR SET OPTION A: /4" GEAR SET GEAR S ET OPTION B: 16 RETAINING RING WASHER /4" GEAR SET CONTINENTAL SHAFT, SPLINED PLUG * SEAL APPLICATOR TOOL (not shown) Avail

15 DIRECT DRIVE SPINDLE DECK ASSEMBLIES Page 15 1 BEARING LOCKING WASHER /8 X 2-3/4 NC SKT HEAD CAPSCREW /4 X 1/2 NC CAPSCREW /2 SPANNER NUT LARGE SNAP RING SMALL SNAP RING PIPE PLUG /8 X 90 GREASE ZERK UPPER SEAL LOWER SEAL SPINDLE HOUSING SEAL/MOTOR MOUNT ALIGNMENT PIN SPACER BOTTOM SEAL PLATE SPACER BOTTOM PLATE GREASE CATCH SPINDLE SHAFT COMPLETE *21 SPLINED INSERT KIT BREATHER /8 LOCK WASHER GR

16 LIFT ASSEMBLIES

17 X18 WELDED CYLINDER LIFT ASSEMBLIES Page /4-20 UNC-3/8 SETSCREW LOCKNUT PISTON ROD BUTT & TUBE ASSEMBLY PISTON GLAND CLEVIS ASSEMBLY SEAL KIT

18 X8 TIE-ROD CYLINDER LIFT ASSEMBLIES Page 18 1 PISTON ROD CLEVIS ASSEMBLY BUTT GLAND PISTON LOCKNUT TUBE TIE-ROD ASSEMBLY SEAL KIT

19 (PAGE INTENTIONALLY BLANK)

20 100% SATISFACTION GUARANTEE GET IT, LOVE IT, or LEAVE IT! 72-HOUR PARTS SHIPPING GUARANTEE