SELF PROPELLED SAW SERIES PARTS LIST

Transcription

1 C35 Series 08/2012 SELF PROPELLED SAW SERIES C35 VANGUARD GASOLINE SERIES Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all times. Revision: /2012 Manual Part# PL

2 INTRODUCTION Congratulations on your purchase of a C35 Self Propelled Flat Saw. We are certain that you will be pleased with your purchase. Norton Clipper takes pride in producing the finest construction power tools and diamond blades in the industry. Operated correctly, your C35 Self Propelled Flat Saw should provide you with years of service. In order to help you, we have included this manual. This owners manual contains information necessary to operate and maintain your C35 Self Propelled Flat Saw safely and correctly. Please take the time to familiarize yourself with the C35 Self Propelled Flat Saw by reading and reviewing this manual. Read and follow all safety, operating and maintenance instructions. If you should have questions concerning your C35 Self Propelled Flat Saw, please feel free to call our friendly customer service department at: (254) Regards, NOTE THIS INFORMATION FOR FUTURE USE: MODEL NUMBER: SERIAL NUMBER: PURCHASE PLACE: PURCHASE DATE: 2

3 TABLE OF CONTENTS SELF PROPELLED FLAT SAW PAGE FIGURE 1 - : C3520SS CONCRETE SAW - P/N FIGURE 2 - : C3526SS CONCRETE SAW - P/N FIGURE 3 - : C3530SS CONCRETE SAW - P/N FIGURE 4 - : C3500SS CONCRETE SAW PARENT - P/N FIGURE 5 - : C3500SS CONCRETE SAW PARENT - P/N FIGURE 6 - : C3500SS CONCRETE SAW PARENT - P/N FIGURE 7 - : C3500SS CONCRETE SAW PARENT - P/N FIGURE 8 - : ASSY. 20 BLADE GUARD - P/N FIGURE 9 - : ASSY. 26 BLADE GUARD - P/N FIGURE 10 - : ASSY. 30 BLADE GUARD - P/N FIGURE 11 - : ASSY. ENGINE, - P/N FIGURE 12 - : ASSY, CONTROL PANEL - P/N NRT FIGURE 13 - : ASSY, FRAME SUB - P/N FIGURE 14 - : ASSY, BLADESHAFT, 1-7/16 - P/N FIGURE 15 - : ASSY, TRANSMISSION - P/N FIGURE 16 - : ASSY, TRUCK - P/N FIGURE 17 - : ASSY, AXLE, REAR - P/N FIGURE 18 - : ASSY, FUEL TANK, GASOLINE - P/N NRT 35 FIGURE 19 - : ASSY, POINTER - P/N NRT 36 FIGURE 20 - : ASSY, SHAFT GUARD - P/N FIGURE 21 - : ASSY, CONTROLHEAD, FNR - P/N FIGURE 22 - : ASSY, WATER VALVE - P/N FIGURE 23 - : ASSY, ACTUATOR - P/N FIGURE 24 - : ASSY, DEPTH INDICATOR - P/N FIGURE 25 - : ASSY, TRANS. IDLER - P/N FIGURE 26 - : ASSY, WATER MANIFOLD, 2T - P/N FIGURE 27 - : ASSY, WATER MANIFOLD, 4T - P/N FIGURE 28 - : ASSY, HINGE - P/N FIGURE 29 - : ASSY, REAR POINTER - P/N GENERAL PRODUCT INFORMATION Contact Information and Limited Warranty 47 3

4 FIGURE 1 - : C3520SS CONCRETE SAW P/N

5 FIGURE 1 - : C3520SS CONCRETE SAW P/N MANUAL TUBE, CLEAR CARD, WARRANTY, NORTON PALLET, SHEET, WARNING LABELS, CONCRETE ASSY, BLADE GUARD C3520SS CONC SAW, PARENT OWNERS MANUAL, C OM 1 8 PARTS MANUAL, C PM 1 9 LABEL, C3520SS MODEL LABEL, NORTON/CLIPPER LOGO

6 FIGURE 2 - : C3526SS CONCRETE SAW - P/N

7 FIGURE 2 - : C3526SS CONCRETE SAW - P/N MANUAL TUBE, CLEAR CARD, WARRANTY, NORTON PALLET, SHEET, WARNING LABELS, CONCRETE ASSY, BLADE GUARD C3520SS CONC SAW, PARENT OWNERS MANUAL, C OM 1 8 PARTS MANUAL, C PM 1 9 LABEL, C3526SS MODEL LABEL, NORTON/CLIPPER LOGO

8 FIGURE 3 - : C3530SS CONCRETE SAW - P/N

9 FIGURE 3 - : C3530SS CONCRETE SAW - P/N MANUAL TUBE, CLEAR CARD, WARRANTY, NORTON PALLET, SHEET, WARNING LABELS, CONCRETE ASSY, BLADE GUARD C3520SS CONC SAW, PARENT OWNERS MANUAL, C OM 1 8 PARTS MANUAL, C PM 1 9 LABEL, C3530SS MODEL LABEL, NORTON/CLIPPER LOGO

10 EXPLODED VIEW FIGURE 4 - : C3500SS CONCRETE SAW, PARENT - P/N

11 FIGURE 4 - : C3500SS CONCRETE SAW, PARENT - P/N HOSE, 3/8 X 5/8 VINYL, WASHER, 3/8 SAE FLAT WASHER, 1/2 SAE FLAT CLAMP, 5/8 HOSE FITTING, 1/2 MNPT X 3/4 FNH SCREW, 5/16-18 X 1 HEX HEAD WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE, 5/ NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT NUT, 3/8-16 NYLOK HEX SCREW, HEX HD CAP, 1/4-20 X WASHER, 1/2 SPLIT LOCK SCREW, 3/8-16 X 2-1/4 HEX HEAD SCREW, 1/2-13 X 1-1/4 HEX HEAD CAP FITTING, 1/2 MNPT X 3/8 BARB EYEBOLT, 1/4-20 X HOSE, 1/4 FUEL, WASHER, FLAT, 5/8 SAE NUT, HEX, NYLK, 1/ RING, 5/8 E-STYLE RETAIING ASSY, CONTROL PANEL, 35SS NRT 1 23 CLAMP, HOSE, 1-15/16 TI 2-1/ BOLT, 5/16-18 X 1/ -1/2 HEX HEAD TAP FITTING, 1/2 NPT COUPLER ASSY, FRAME SUB PANEL, TOWER R/H NRT 1 28 PANEL, TOWER L/H NRT 1 29 PANEL, TOWER, UPPER BACK, C NRT 1 30 ASSY, FUEL TANK, GASOLINE NRT 1 31 HOSE, 2.0 ID FUEL FILL(COMP) BUSHING, 3/8 X 5/8 X ASSY, ACUTATOR PIN, MOUNTING, 5/ CANISTER, CARBON, 600CC HOSE, FUEL, 1/2, LOW PERM,

12 FIGURE 5 - : C3500SS CONCRETE SAW, PARENT - P/N

13 FIGURE 5 - C3500SS CONCRETE SAW, PARENT - P/N NUT, 3/8-16 HEX WASHER, 3/8 SAE FLAT WASHER, 1/2 SAE FLAT SCREW, 5/16-18 X 1 HEX HEAD WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE, 5/ NUT, 1/4-20 HEX SCREW, 1/4-20 X 3/4 HEX HEAD SCREW, HEX HD CAP, 3/8-16 X WASHER, 1/4 SPLIT LOCK WASHER, 1/2 SPLIT LOCK SCREW, 1/2-13 X 1-1/4 HEX HEAD CAP SPRING, 9/16 X 2.5 EXTENSION EYEBOLT, 1/4-20 X BELT, V, 3VX BELT, AX ASSY, ENGINE, 3000V ASSY, CONTROL PANEL, 35SS NRT 1 19 ASSY, TRANS IDLER PANEL, TOWER R/H NRT 1 21 PANEL, TOWER L/H NRT 1 22 PANEL, TOWER, LOWER FRONT, C NRT 1 23 ASSY, FUEL TANK, GASOLINE NRT 1 24 CASTING, BELT GUARD (COMP) NRT 1 25 PLATE, BLT GRD, INNER FITTING, 1/4MNPT X 3/16 BARB FITTING, 1/4 FNPT X 1/2 BARB

14 FIGURE 6 - : C3500SS CONCRETE SAW, PARENT - P/N

15 FIGURE 6 - : C3500SS CONCRETE SAW, PARENT - P/N NUT, 3/8-16 HEX NUT, HEX, 5/ WRENCH, BOX END, 1-1/2 X 9/ HOSE, 3/8 X 5/8 VINYL, WASHER, 3/8 SAE FLAT WASHER, 3/8 SPLIT LOCK /16 FENDER WASHER CLAMP, 5/8 HOSE SCREW, 5/16-18 X 1 HEX HEAD NUT, HEX, 1/ WASHER, 1/4 SAE FLAT WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X SCREW, HEX, 3/8-16 X 3/ CABLE, 4GA X 48 RED BATTERY BOX, BATTERY TAG, SERIAL #, BLANK RW 1 18 DRIVE SCREW, #7 X 5/16 ROUND HEAD STRAP, NYLON, BATTERY, 12V, 35AH SPRING,.44 X 10.3 X.041 EXTENSION WRENCH, 1 OPEN CABLE, 44 DEPTH INDICATOR ASSY, CONTROL PANEL, 35SS NRT 1 25 COVER, 1 BATTERY TERMINAL, RED FITTING, 3/4 X 11.5 FNH X 3/8 BARB PANEL, TOWER R/H NRT 1 28 PANEL, TOWER L/H NRT 1 29 WIRE HARNESS, 3000V ASSY, FUEL TANK, GASOLINE NRT 1 31 TAPE, VHB, 5952 (3.0 ) CABLE, BATTERY, BLACK, 4GA WIRE HARNESS, ELEC R/L, LABEL, NORTON/CLIPPER LOGO FUSE, 50A MAXI BLADE TAG, EVAP, 30S, PARENT C

16 FIGURE 7 - : C3500SS CONCRETE SAW, PARENT - P/N

17 FIGURE 7 - C3500SS CONCRETE SAW, PARENT - P/N screw, 3/8-16 x 1-1/4 HEX HEAD CAP GRIP, HANDLE, 1.0 ID WASHER, FLAT, SAE, WASHER, 1/2 SAE FLAT NUT, WING, NYLK, 5/ NUT, HEX, NYLK, 3/ WASHER, 1/2 SPLIT LOCK SCREW, 1/2-13 X 1-3/4 HEX HEAD CAP HANDLEBAR KNOB, 1/2-13 T-HANDLE ASSY, POINTER NRT 1 12 ASSY, CONTROL PANEL, 35SS NRT 1 13 ASSY, REAR POINTER ASSY, SHAFT GUARD PANEL. TOWER R/H NRT 1 16 PANEL. TOWER L/H NRT 1 17 PANEL, TOWER LOWER BACK ASSY, FUEL TANK, GASOLINE NRT 1 19 CASING, BELT GUARD (COMP) NRT 1 20 BAIL, LIFTING

18 FIGURE 8 - : ASSY, 20 BLADE GUARD - P/N

19 FIGURE 8 - : ASSY, 20 BLADE GUARD - P/N CLAMP, 5/8 HOSE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE 5/ NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, HEX HD, 1/4-20 X 3/ WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X SCREW, 1/4-20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/ TIE, NYLON CABLE, 1/8 X 4, BLACK NUT, 1/4-20 NYLOK LOCK, BLADE GUARD BUTTON, RELEASE GUARD, SPLASH NL 1 17 SPRING, EXTENSION ASSY, HINGE HOSE, VINYL, 1/4 X 1/2 (24 L) ASSY, WATER MANIFOLD, 2T GUARD, 20 REAR BLADE GUARD, 20 FRONT BLADE LATCH, 20 BLADE GUARD

20 FIGURE 9 - : ASSY, 26 BLADE GUARD - P/N

21 FIGURE 9 - : ASSY, 26 BLADE GUARD - P/N CLAMP, 5/8 HOSE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE 5/ NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, HEX HD, 1/4-20 X 3/ WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X SCREW, 1/4-20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/ TIE, NYLON CABLE, 1/8 X 4, BLACK NUT, 1/4-20 NYLOK LOCK, BLADE GUARD BUTTON, RELEASE GUARD, SPLASH NL 1 17 SPRING, EXTENSION ASSY, HINGE HOSE, VINYL, 1/4 X 1/2 (24 L) ASSY, WATER MANIFOLD, 4T GUARD, 26 REAR BLADE GUARD, 26 FRONT BLADE LATCH, 26 BLADE GUARD

22 FIGURE 10 - : ASSY, 30 BLADE GUARD - P/N

23 FIGURE 10 - : ASSY, 30 BLADE GUARD - P/N CLAMP, 5/8 HOSE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE 5/ NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, HEX HD, 1/4-20 X 3/ WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X SCREW, 1/4-20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/ TIE, NYLON CABLE, 1/8 X 4, BLACK NUT, 1/4-20 NYLOK LOCK, BLADE GUARD BUTTON, RELEASE GUARD, SPLASH NL 1 17 SPRING, EXTENSION ASSY, HINGE LATCH, 30 BLADE GUARD HOSE, VINYL, 1/4 X 1/2 (24 L) ASSY, WATER MANIFOLD, 4T GUARD, 30 REAR BLADE GUARD, 30 FRONT BLADE

24 FIGURE 11 - : ASSY, ENGINE - P/N

25 FIGURE 11 - : ASSY, ENGINE - P/N NUT, HEX, 5/ CLAMP, 5/8 HOSE WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE, 5/ SCREW, SET, SOC, CUPT, 3/8-16 X 1/ BOLT, HEX, TAP, 1/2-13 X SCREW, HEX, 5/16-18 X 2-1/ HOSE, 1/4 FUEL, KEY, SQR, 3/8 X PULLEY, 7/3VX/2.8 X 1-7/16 BORE MOUNT, ENGINE ENGINE, B/S, VANGUARD, 35HP

26 FIGURE 12 - : ASSY, CONTROL PANEL - P/N NRT 26 1 NUT, HEX, 5/ WASHER, 3/8 SAE FLAT WASHER, 3/8 SPLIT LOCK WASHER, FENDER, 5/16 X SCREW, HEX HD, 5/16-18 X WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE, 5/ SCREW, HEX HD, 1/4-20 X 3/ OTY.

27 FIGURE 12 - : ASSY, CONTROL PANEL - P/N NRT 27 9 SCREW, 5/16-18 X 1/-12/ HEX HEAD MACHINE SCREW, HEX HD CAP, 3/8-16 X WASHER, 1/4 SPLIT LOCK TACHOMETER/HOURMETER SCREW, 1/4-20 X 1/2 TRUSS HEAD COVER, SWITCH KNOB, 1/2-20 FEM BALL SCREW X 3/4 FLAT HEAD PHILLIPS MACHINE CONTACTS, NO CONTACTS, NC NUT, 3/4-24 HEX JAM SCREW, PAN HD SELF TAP 8-32 X 1/ PLUG, 1/2 FLUSH HEAD BUTTON NUT, 5/16 18 NYLOK HEX ASSY,SWITCH BUTTON, GAS KNOB, DEPTH INDICATOR (COMP) POINTER, DEPTH INDICATOR CASTING, FNR LEVER (COMP) LABEL SHEET, CONTROL PANEL CABLE, CHOKE (COMP) SHAFT, FNR CONTROL BOLT, 5/16/ - 18 X 1-1/2 HEX HEAD TAP BALL JOINT, 30 SERIES ASSY, DEPTH INDICATOR ASSY, CONTROLHEAD, FNR SWITCH, 11A/120V SPDT SNAP NUT, HEX, NYLK, 1/ LIGHT, 1/2 DIA. PANEL, RED GAUGE, FUEL, ANALOG ASSY, WATER VALVE SCREW, 4-40 X 3/4 SOCKET HEAD CAP RELAY, 12V, 70A CASTING, CONTROL PANEL, COMP NRT 1 42 CABLE, THROTTLE, 3000V -COMP NEX, 2 FUEL FILLER CAP, 2 FUEL FILLER SWITCH, TOGGLE, (ON) OFF (ON) MOUNT, UPPER, ACTUATOR SWITCH, KEYED, ON-OFF START OTY.

28 EXPLODED VIEW FIGURE 13 - : ASSY, FRAME SUB - P/N

29 FIGURE 13 - : ASSY, FRAME SUB - P/N NUT, 3/8-16 HEX WASHER, 3/8 SAE FLAT WASHER, 1/2 SPLIT LOCK WASHER, LOCK, SPLIT, 3/ SCREW, HEX HD CAP, 3/8-16 X CLAMP, 7/8 CUSHION LOOP SCREW, 5/16-18 X 1/2 SOCKET HEAD STE WASHER, 1/2 SPLIT LOCK SCREW, 1/2-13 X 1-1/4 HEX HEAD CAP SCREW, 1/2-13 X /4 HEX HEAD CAP SCREW, 1/4-20 X 1/2 TRUSS HEAD BOLT, 3/8-16 X 2-1/2 HEX HEAD CAP WASHER, FLAT, USS, 1/ SCREW, 3/8-16 X 1 FLATHEAD MACHINE GROMMET, 1/2 X ASSY, TRUCK BRACKET, TRANS LIFT, ADJ BRACKET, TRANS MOUNT FIXED FRAME, WELDMENT MAIN PLATE, REAR FRAME SHAFT, TRUCK PIVOT ASSY, AXLE, REAR ASSY, TRANSMISSION CHAIN, #40 ROLLER, W/LINK CORNER, MAIN FRAME ASSY, BLADESHAFT, KEYED, 1-7/ BRACKET, ENG MOUNT, RH BRACKET, ENG MOUNT, LH

30 FIGURE 14 - : ASSY, BLADESHAFT, 1-7/16 - P/N NUT, 1-14 RIGHT HAND NUT, 1-14 LEFT HAND BUSHING, TPR- LOCK, 1615 X 1-3/ KEY, WOODRUFF, 5/16 X 1-1/ PULLEY, 7/3VX/4.75 X 1615TB BEARING, 1-7/16 ID PILLOW BLOCK ASSY, FLANGE, OUTER, FLANGE, 5 INNER SHAFT, BLADE, KEYED, 1-7/ KEY, SQR, 3/8 X 3/4 `

31 FIGURE 15 - : ASSY, TRANSMISSION - P/N WASHER, 3/8 SAE FLAT WASHER, 3/8 SPLIT LOCK SCREW, SOC HD CAP, 1/4-20 X SCREW, X 3/8 PAN HEAD PHILLIPS MACHINE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE, 5/ NUT, 3/8-16 NYLOK HEX SCREW, 3/8-16 X 3 HEX HEAD CAP SCREW, HEX, 3/8-16 X 3/ OTY. 31

32 FIGURE 15 - : ASSY, TRANSMISSION - P/N PUMP, TRANSMISSION PULLEY, A4.0 X 17 MM BORE OFFSET PIN, WIRE STOP SCREW, SET CNE PT 1/4-20 X 1/ KEY, WOODRUFF, 1/8 X 1/ SCREW, HEX HD FL X 5/ SCREW, 1/4-20 X 1/2 PAN HEAD PHILLIPS MACHINE SCREW, 1/4-20 X 1/2 SOCKET HEAD SET RING, 1 EXTERNAL RETAINING RING,.75 E-STYLE RETAINING PLUG, 3/8 NPT HEX SOCKET, GALV ASSY, ENGAGEMENT GEAR ASSY, PUMP PINION ASSY, TRANS FORK ASSY, TRANS CASE KEY, WOODRUFF, 1/4 X 3/ LEVER, TRANS CONTROL PLATE, LOCKER, KEYED SPRING, 1.5OD X 1.3 COMPRES SION COLLAR, 1/2 SHAFT LEVER, TRANS FORK BRACKET, TRANS FNR BRACKET, TRANS PIVOT SPRING,.56 OD X 1.38 COMPRESSION PIN, 1/4 X 5/8 DOWEL CABLE, TRANS CONTROL BALL JOINT, 30 SERIES CLAMP, 30 SERIES CONDUIT ASSY, CHANGE GEAR NUT, HEX, NYLK, 1/ OIL, SAE GEAR SEALANT, HI-TEMP FORM-A-GASKET CASTING, TRANS CASE3 (COMP) SHAFT, AXLE, # SPROCKET, 40BS24 X 1.0 BORE BEARING, BALL, 20 X 42 X 12 MM RING, 1-11/16 INTERNAL RETAINING CABLE, T2L CONTROL, 33, - COMP OTY. 32

33 FIGURE 16 - : ASSY, TRUCK - P/N WASHER, 3/8 SAE FLAT WASHER, 3/8 SPLIT LOCK SCREW, HEX HD CAP, 3/8-16 X WHEEL, 6 X 2-1/2 X COLLAR, 1.0 SHAFT WASHER, 1 SAE FLAT STOP, TRUCK TRUCK

34 FIGURE 17 - : ASSY, AXLE, REAR - P/N KEY, 1/4 X 1 WOODRUFF BEARING, 1.0 ID PILLOW BLOCK COLLAR, 1 SHAFT WASHER, 1 SAE FLAT NUT, 1-8 NYLOK HEX SCREW, 5/16-24 X 3/4 HEX HEAD MACHINE SHAFT, REAR AXLE WHEEL, 8 X 2-1/2 X 1.0 BORE SPROCKET, 40BS29 X 1.0 BORE

35 FIGURE 18 - : ASSY, FUEL TANK, GASOLINE - P/N NRT 1 SENDER, FUEL ELBOW, 1/4 MNPT X 1/4 BARB, 90 DEG TANK, FUEL NRT 1 35

36 FIGURE 19 - : ASSY, POINTER - P/N POINTER WHEEL, POINTER, BUSHING, 3/8ID X 1-5/8L KNOB, 1/4-20 3/4 PRONG, NO LOGO ASSY, POINTER

37 FIGURE 20 - : ASSY, SHAFT GUARD - P/N SCREW, HEX HD 1/4-20 X 3/ KNOB, 3 PRONG 3/8-16 X GUARD, SHAFT BACK PLATE, SHAFT GUARD

38 FIGURE 21 - : ASSY, CONTROLHEAD, FNR - P/N NUT, HEX, 5/ SCREW, X 38 PAN HEAD PHILLIPS MACHINE WASHER, 1/4 SAE FLAT SCREW, HEX HD, 1/4-20 X 3/ WASHER, 1/4 SPLIT LOCK WASHER, #10 SPLIT LOCK SCREW, 5/16-18 X 3/8 SOCKET HEAD SET BRACKET, FNR CONTROL CLAMP, 30 SERIES CONDUIT JOURNAL, FNR CONTROL WASHER, 2.0 X.812 X.088 NYLON RACKET, FNR PIVOT SPRING, 1.50 X.755 X.045, DISK SCREW, 3/4 X 1/2 SOCKET HEAD SHOULDER PLUNGER, 5/16-18 X 1.0 SPRING

39 FIGURE 22 - : ASSY, WATER VALVE - P/N ELBOW, 1/2 MNPT 90 STREET, GALV FITTING, 1/2 MNPT X 3/8 BARB VALVE, BALL 1/ SCREW, PAN HD PHIL X 5/ BRACKET, WATER VALVE FIGURE 23 - : ASSY, ACTUATOR - P/N ACTUATOR, ELEC, 12V LINK, COUPLER STUD, 5/8-18 X

40 FIGURE 24 - : ASSY, DEPTH INDICATOR - P/N NUT, HEX, 5/ WHEEL, CONVEYOR CART WASHER, LOCK, SPLIT, 5/ PULLEY, Ø 1.38 DEPTH INDICATOR WASHER, 1 X 13/32 X 06 PLASTIC BRACKET, DEPTH INDICATOR NUT, 5/16 FLANGED PLASTIC WASHER, 5/16 FLANGED PLASTIC BOLT, 5/16-18 X 1-1/2 HEX HEAD TAP

41 FIGURE 25 - : ASSY, TRANS. IDLER - P/N WASHER, 3/8 SPLIT LOCK SCREW, 3/8-16 X 1-1/2 HEX HEAD PULLEY, IDLER, BV BRACKET, IDLER PULLEY FIGURE 26 - : ASSY, WATER MANIFOLD, 2T - P/N NIPPLE, 1/4 NPT X CLOSE, BRASS FITTING, 3/4 X 11.5 MNH X 1/4 FNPT FITTING, PUSH ON HOSE 1/4 X 1/4 MALE MANIFOLD, WATER, 2 TUBE

42 FIGURE 27 - : ASSY, WATER MANIFOLD, 4T - P/N FIGURE 28 - : ASSY, HINGE - P/N NIPPLE, 1/4 NPT X CLOSE, BRASS FITTING, 3/4 X 11.5 MNH X 1/4 FNPT FITTING, PUSH ON HOSE 1/4 X 1/4 MALE MANIFOLD, WATER 4 TUBE WASHER, 3/8 SAE FLAT WASHER, 3/8 SPLIT LOCK SCREW, 3/8-16 X 3-3/4 HEX HD CAP NUT, 3/8-16 NYLOK HEX PLATE, FRONT HINGE PLATE, REAR HINGE

43 FIGURE 29 - : ASSY, REAR POINTER - P/N WASHER, 1/2 SAE FLAT NUT, 1/2-13 NYLOK HEX ARM, REAR POINTER STANDOFF, REAR PINTER

44 NOTES 44

45 NOTES 45

46 NOTES 46

47 CONTACT AND LIMITED WARRANTY CONTACT Please contact Saint-Gobain Abrsives, Inc. Customer Service Department with any questions you might have regarding distributors, parts or service. Telephone: (254) Fax: (254) Customer Service Hours: Monday through Friday, 6AM-6PM CST Saint-Gobain Abrasives, Inc W. Washington St. Stephenville, TX WARRANTY Norton warrants all products manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to the customer. The responsibility of Norton under this warranty is limited to replacement or repair of defective parts at Norton s Indianapolis, Indiana Distribution Center, or at a point designated by it, of such part as shall appear to us upon inspection at such point, to have been defective in material or workmanship, with expense for transportation borne by the customer. In no event shall Norton be liable for consequential or incidental damages arising out of the failure of any product to operate properly. Integral units such as gasoline engines, electric motors, batteries, tires, transmissions, etc., are excluded from this warranty and are subject to the prime manufacturer s warranty. This warranty is in lieu of all other warranties, expressed or implied, and all such other warranties are hereby disclaimed. 47

48 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: Lead from lead based paints, Crystalline silica from bricks and cemetn and other masonry products, and Arsenci and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how ofter you do this ype of work. To reduce your exporsure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Saint-Gobain Abrasives, Inc West Washington Street Stephenville, TX All THE MUSCLE YOU NEED. Phone: Fax: