PT-37 PLASMARC TORCH. PT-37 Torch. Specifications. Optional Accessories. Consoles PowerCut 1300, PowerCut 1600, ESP-101. Ordering Information.
|
|
- Edmund Franklin
- 5 years ago
- Views:
Transcription
1 PT-37 PLASMARC TORCH PT-37 Torch The patented PT-37 torch cuts up to 1.25 (32 mm) material using air as the plasma and shielding gas. Utilizing a blowback start and an electronically controlled pilot arc the PT-37 sets a new standard for starting reliability, cutting characteristics and consumable life. 100% Duty Cycle for enhanced productivity allowing for continuous operation even at maximum thickness. Utilizes a drawn arc to initiate the cut which eliminates high frequency interference from the starting circuits. An optional remote starting system allows the torch to be located up to 150 (45m) away from the power supply. Machined torch body with 1 3/8 (35mm) metal handle, available with and without 32-pitch rack to fit industry standard torch holders. Robust machined torch components provide for reliability, durability and ease of maintenance. Metal nozzle and shield stand up to the toughest cutting conditions. Wear parts are available individually, in sets and in value packs which eases ordering and saves money. Specifications Cut capacity Up To 1.25 (32 mm) for Carbon Steel, Stainless Steel, 1 (25.4 mm) Aluminum 3 phase Input at rated load... 20KVA, 50/60 Hz...208/230/380/400/ /475/575 Volts... 4/49/29/28/25/24/20 A Output % duty cycle Minimum Air Requirements psig( bars) Consoles 1300, 1600, ESP-101 Ordering Information PT-37 Torch with rack 4.5 (1.3m) PT-37 Torch with rack 17 (5.2m) PT-37 Torch with rack 25 (7.6m) PT-37 Torch with rack 50 (15.2m) PT-37 Torch without rack 4.5 (1.3m) PT-37 Torch without rack 17 (5.2m) PT-37 Torch without rack 25 (7.6m) PT-37 Torch without rack 50 (15.2m) Start-Up Kit, 100 amp, PT Optional Remote Junction Box and Extension Hoses & Cables Remote Junction Box PT Hose/Cable Bundle RJB 50 (15m) Hose/Cable Bundle RJB 100 (30m) Optional Accessories Torch holder, manually adjustable, 32 pitch rack Plate Rider assembly PT-37 Consumables & Wear parts Electrode PT-37, Long Life Electrode PT-37/38, Standard Swirl Baffle Amp PT Swirl Baffle 100 Amp PT Nozzle 30A PT Nozzle 50A PT Nozzle 70A PT Nozzle 100A PT Nozzle Retainer PT Shield Amp PT Shield 100 Amp PT Shield Amp PT PT-37 Consumable Kits & Sets Consumable Set 50A PT-37 (1 nozzle, 1 electrode) Consumable Set 100A PT-37 (1 nozzle, 1 electrode) Value Pack 100A PT-37 (12 nozzles, 8 electrodes)
2 PT-37 PLASMARC TORCH Amperes: 50 Plasma Gas: psi (4.8 bar) (16 ga) (5.1) (5.1) (1.6) (1.0) 375 (9525) 350 (10160) (3.2) (5.1) (5.1) (2.3) (1.5) 150 (3810) 194 (4928) (4.8) (5.1) (5.1) (2.4) (1.6) 90 (2286) 130 (3302) (6.4) (5.1) (5.1) (3.2) (1.7) 65 (1651) 85 (2159) (9.5) (5.1) (6.4) (3.0) (1.7) 35 (889) 45 (1143) (12.7) (5.1) (6.4) (1.8) (1.8) 20 (508) 27 (686) (15.9) (5.1) (7.0) (1.9) (1.9) 10 (254) 12 (305) Amperes: 70 Plasma Gas: Air@80 psi (5.5 bar) (3.2) (5.1) (5.1) (2.4) (1.3) 225 (5715) 275 (6985) (6.4) (5.1) (6.1) (4.0) (1.7) 93 (2362) 128 (3251) (9.5) (5.1) (6.1) (5.5) (1.9) 50 (1270) 65 (1651) (12.7) (5.1) (7.1) (5.1) (2.2) 32 (813) 45 (1143) (15.9) (5.1) (7.1) (4.8) (2.4) 22 (559) 27 (686) (19.1) (5.1) Nr (4.0) 160 Nr (2.7) 12 (305) 16 (406) Amperes: 100 Plasma Gas: Air@80 psi (5.5 bar) (6.4) (4.8) (4.8) (2.3) (1.9) 77 (1956) 100 (2540) (9.5) (4.8) (4.8) (4.0) (2.3) 44 (1118) 56 (1422) (12.7) (4.8) (6.1) (4.0) (2.5) 57 (1448) 70 (1778) (15.9) (4.8) (6.1) (4.0) (2.8) 40 (1016) 45 (1143) (19.1) (5.1) (7.6) (3.2) (2.7) 26 (660) 35 (889) (25.4) (6.4) Nr (2.0) 155 Nr (3.0) 16 (406) 20 (508) (31.8) (6.4) Nr (1.6) 159 Nr (3.0) 10 (254) 13 (330) Note: NR = Not Recommended Swirl Baffle Amp Swirl Baffle 100 Amp Electrode, Long Life Electrode, Standard Nozzle 30A Nozzle 50A Nozzle 70A Nozzle 100A Nozzle Retainer Shield Amp Shield Amp Shield 100 Amp
3 PLASMARC PRODUCT SELECTION GUIDE Plasmarc Package Selection Guide Torch Compatibility See Output Duty PT-31 PT-31 PT-32 PT-20AMX PT-19XLS Cut Capacity Model Page Current Cycle PT-34 XL XLPC EH PT-37 PT-38 PT-251 PT-26 PT-35 PT-21AMX PT600 Carbon Steel 1/8 inch 8 11 A 30% mm 1/4 inch 9 18 A 20% mm 3/8 inch A 35% mm 1/2 inch A 40% mm A 100% 5/8 inch 15.9 mm A 60% 7/8 inch 22 mm A 60% 1 1/4 inch 32 mm A 40% 1 1/2 inch 38 mm ESP A 100% 1/2 inch 12.7 mm ESP A 100% 1 1/4 inch 32 mm ESP A 90% 2 inch 50.8 mm ESP A 100% 2 inch 50.8 mm Deuce Pack A 90% Special 4 inch Order 101.6mm Plasmarc Torch Selection Guide See Torch Cutting Shielding Cooling Torch Torch Page Output Type Gas Gas Method Head Angle Lengths Available Power Supply Compatiblity PT A Man Air N/A Gas ft. 125 PCM-500i PT-31XL A Man Air N/A Gas & 50 ft. 550, 380 PT-31XLPC A Man Air N/A Gas & 50 ft. 650 PT A Man Air N/A Gas & 50 ft. PCM-875, PCM-1125 PT-32EH A Man Air N/A Gas & 50 ft. PT Mech Air N/A Gas In Line 4-1/2, 17, 25, 50 ft. PT Man Air N/A Gas 90 25, 50 ft. PT PT-251 PT A PT-20AMX PT-21AMX 6 875, 1125, 1250, A Man Air, N 2, Air, Gas & 50 ft. ESP-100i Air H-35 N 2,CO A N 2,H , 1600, ESP , 1600, ESP A Man & H-35 N/A Water 70 & & 50 ft. Deuce Pack 150 Mech Man & Air, N 2, Air, Deuce Pack 150, Water 70, 90 & & 50 ft. Mech H-35 N 2, CO 2 ESP-150, ESP A Mech Air N/A Gas Inline 4-1/2, 17, 50 ft. PT A Mech Air N/A Gas Inline 25 & 50 ft. ESP-50 ESP-100i, PCM-150, (w/adaptor): PCM-875, PCM-1125, (PC-1250, PC-1500 w/pt-2 AMX only)
4 PLASMARC PRODUCT SELECTION GUIDE Recommended Cutting Gases Compressed Air is the most commonly used gas for lower current plasma cutting and works well for most metals from gauge thickness to 1 in. (25.4 mm). It leaves an oxidized cut surface. Compressed air can also be used for plasma gouging on carbon steel. Nitrogen is often used for higher current plasma systems and for cutting materials up to 3 in. (76.2 mm) thick. It produces excellent quality cuts on most materials. Oxygen is used when the highest quality mechanized cuts are desired on carbon steel up to 1-1/4 in. (31.75 mm) thick. The cut face is smooth, and dross is easy to remove. Oxygen can also be used on stainless steel and aluminum, but it produces a rougher cut face. Argon-Hydrogen Mixtures are generally used for cutting stainless steel and aluminum. They produce a clean, high quality cut face. Argon-Hydrogen is required for mechanized cutting of any material more than 3 in. (76.2 mm) thick. This mixture also provides an excellent gas for plasma gouging on all materials. Plasmarc Cutting Package Capabilities 4 (101.6 mm) Inches/mm Carbon Steel 3.5 (88.9 mm) 3 (76.2 mm) 2.5 (63.5 mm) 2 (50.8 mm) 1.5 (38.1 mm) 1 (25.4 mm) 0.5 (12.7 mm) Cut Sever ESP-101 ESP-150 ESP-200 Deuce Pack 7
5 PLASMARC ACCESSORIES Accessories Torch Guide Kits Includes attachments for circle and straight line cutting on ferrous and non-ferrous metals For additional information, order literature number EMB-1074 (Deluxe Kit) and/or EMB-1075 (Basic Kit) Adaptor for PT-17AM and PT-20AMX Adapts PT-17AM torch to PCM-875 and PCM-1125 console for manual cutting Adapts PT-17AM/PT-20AM torches to PCM-875 and PCM-1125 consoles for mechanized cutting 90 Head Angle Converter Kit for PT-27/23 Torch Fits between handle and head of torch Gives the effect of a 90 angle torch head Plasma Flow Measuring Kit Valuable troubleshooting tool Allows measurement of actual plasma gas flow through torch Remote Hand Switch Allows the operator to start and stop the cutting process with a remote switch. Used primarily for mechanized cutting and is included in the mechanized Plasmarc packages Torch Retrofit Kits Allow select ESAB Plasmarc torches to be retrofitted to other brand plasma consoles Do not include the torch, which must be purchased separately Leather Sheath A 10 ft. (3 m) leather sheath to protect torch leads from abrasion and molten metal Particularly recommended for plasma gouging Plasmits Special flexible shields attach around the head of a plasma cutting torch to provide added protection against heat and molten metal Recommended for heavy duty plasma gouging applications Torch Wrap & Kit Holder This enables operator to store spare parts kit, wrap torch and work cable for easy transport and storage Wheel Kit This enables easy transport of the PCM-500i, PCM-875 and PCM-1125 Series; and 875/1125 and 1250/1500 Series Machines Basic Torch Guide Kit Deluxe Torch Guide Kit Torch Wrap and Kit Holder Machines Plasmit w/torch Plasma Flow Measuring Kit Wheel Kit Machines Ordering Information Torch Wrap and Kit Holder, PCM Series GY Torch Wrap and Kit Holder, 875/ Torch Wrap and Kit Holder, 1250/ Torch Wrap & Kit Holder Wheel Kit Wheel Kit, PCM Series Wheel Kit, 875/ Wheel Kit, 1250/ Torch Guide Kit for PT-17, 23/27, 25, 31/34 & PT-32EH (Deluxe: 1-3/4 in. (44.45 mm) - 42 in. (106.7 cm) Radius) PT-17 Bushing...TJ2226 PT-23/27 Bushing...TJ2225 PT-25 Bushing...TJ2230 PT-31XL Bushing...TJ2228 PT-32 Bushing Torch Guide Kit for PT-27/31XL/34/32 Torch (Basic: 1-3/4 in. (44.45 mm) - 28 in. (71 cm) Radius) Angle Converter Kit for PT Plasma Flow Measuring Kit Remote Hand Switch PT-20AMX Remote Hand Switch ESP-150 and ESP Remote Hand Switch PT-21AMX Retrofit Kit to adapt PT-17A to PAK5XR/PAK10XR Retrofit Kit to adapt PT-31XL/ PT-27 to MAX Ft. Leather Sheath with Snaps (For use with any ESAB Plasmarc torch) Plasmit for PT-17A Manual Torch Plasmit for PT-121, 75 Torch Plasmit for PT-121/PT-25, 90 Torch Plasmit for PT-121, Mechanical Torch Plasmit for PT-251, 75 Torch Plasmit for PT Torch Plasmit for PT Torch Plasmit for PT-251 Mechanical Torch Adaptor for PT-17A & PT-20AMX on PCM-875 & PCM
1YR. ESAB Cutmaster100. Heavy Industrial. Product picture
ESAB Cutmaster100 Heavy Industrial The ESAB Cutmaster 100 weighs in at 28 kg and provides 100 amps of cutting power. This unit s light weight compact design makes it the most portable and powerful cutting
More informationPowerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT
Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Plasma Cutting What is plasma cutting? Plasma is an ionized gas that is electrically conductive giving you the ability to cut most
More informationPT-32EH Plasmarc Cutting Torches
PT-32EH Plasmarc ting Torches Instruction Manual (EN) 0558003746 Be sure this information reaches the operator. You can get extra copies through your supplier. caution These INSTRUCTIONS are for experienced
More informationPT-17A/PT-17AM STYLE TORCH HEAD COMPONENTS USED WITH CONSOLES PCM-150 (875/1125 W/ADAPTER)
Century & Esab 20-20 STYLE TORCH HEAD COMPONENTS 20-40 STYLE TORCH HEAD COMPONENTS NO. CENTURY /SOLAR DESCRIPTION 1. PX 4405 4405 44050 O-ring 2. PX 4422 4422 44220 Swirl ring 3. PX 4420 4420 44200 Electrode
More information4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip
4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip Art # A-04203 Electrode Start Cartridge Tip Shield Cup Body Shield Cap, Deflector 9-8215 9-8213 9-8237 9-8243 Torch: SL100 with Exposed
More informationPowerCut 900/1600 PLASMA CUTTING EQUIPMENT
PowerCut 900/1600 PLASMA CUTTING EQUIPMENT Powerful, durable, simple Rugged steel case Torch wrap and wear part kit holder Glass-reinforced nylon handles/ guards Digital panel Trigger lock function (2/4
More informationPOWERCUT 650 Portable Plasma Cutting System
POWERCUT 650 Portable Plasma Cutting System Instruction Manual (EN) ESAB Consoles: ESAB P/N 0558005151-230V, 1/3-Phase, 50/60 Hz - "CE" ESAB P/N 0558005152-400V, 3-Phase, 50/60 Hz - "CE" ESAB P/N 0558007820-400V,
More informationPowercut 650. Portable Plasma Cutting System. Instruction Manual
Powercut 650 Portable Plasma Cutting System Instruction Manual ESAB Console Item No. 0558003179, PC-650 208/230V 1 PH CONSOLE ESAB Console Item No. 0558003515, PC-650 208/230V 1 PH CONSOLE (BL) ESAB Console
More informationcomplete Kit with: ST120 torch Ground cable WELDING MACHINES & BATTERY CHARGERS
Viale Galileo Galilei 123 36066 Sandrigo (VI) Italy Tel. +39 0444 666999 Fax. +39 0444 750070 info@helvi.com www.helvi.com PC 123 CNC Robotic machine interface complete Kit with: ST120 torch Ground cable
More informationAvailable in & International Customer Care: / FAX
Available in 75 90 & 80 International Customer Care: 940-38-22 / FAX 940-483-878 page The Only Universal Plasma! As a replacement (RPT ) torch, the has the ability to work on the majority of plasma power
More informationThe plasma arc comes on im me di ate ly when the torch trigger is activated. Make sure the power is OFF before changing consumables.
Choose the consumables (cut charts) WARNING INSTANT-ON TORCHES PLASMA ARC CAN CAUSE INJURY AND BURNS I O The plasma arc comes on im me di ate ly when the torch trigger is activated. Make sure the power
More informationHypertherm has a wide variety of handheld systems to meet your applications. Choose the thickness capacity that you require.
Hypertherm has a wide variety of handheld systems to meet your applications. Choose the thickness capacity that you require. MANUAL SYSTEM SECTIONS: Company Technology Products Contact us Service Careers
More informationFigure 4-5. Piercing Technique using the PT-38
SECTION 4 OPERATION F. After starting the cut, the torch should be maintained at a 5-15 forward angle. This angle is especially useful in helping to create a "drop" cut. When not using the stand-off guide,
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA Product Catalogue 2.2 / V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS CUT 70 / ABIPLAS
More informationINDEX S A A A A PT PT PT P Panasonic...14 EL Maximiser
PLASMA TORCH RANGE INDEX S... A8... A0... A...7 A...9 PT...0 PT0... PT00...2 P90... Panasonic... EL20... Maximiser 00...7 2 S 7 8 9 2 0 Torch Head - S 2 PL PE00 Swirl ring PL PR00 Electrode, Hafnium PL
More informationPLASMA. Product Catalogue 2.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1. Plasma Cutting and Welding Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1 Plasma Cutting and Welding Technology for all Metalworking Industries. www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches
More information88 Plasma Cutting Cuts Steel, stainless steel, aluminium, cast iron, copper brass, titanium, magnesium alloys Typical Usage Metal fabrication, construction, weld repair, automotive repair, automotive racing,
More informationManual Plasma Cutting Inverters
Manual Plasma Cutting Inverters AEQPLA Rev 2 100 654 674 I www.cigweld.com.au Introduction ictor Technologies Professional: When cutting and welding is your business At ictor Technologies we distinguish
More informationPART NUMBERS DESCRIPTION MIN QTY PX TIP 1.0 MM (4) 4 PX AIR DIFFUSER INSULATOR (5) 10 PX ELECTRODE ZR 14.
BINZEL PSB0 PX-000 TIP.0 MM () 0 PX-00 AIR DIFFUSER INSULATOR () 0 PX-00 ELECTRODE ZR MM () 0 PX-00 ELECTRODE ZR. MM () 0 PX-00 INSULATOR SLEEVE () 0 PX-00 SPRING () 0 PX-00 TIP. MM () 0 PX-00 INSULATOR
More informationCentricut plasma torches and consumables for Thermal Dynamics
plasma torches and consumables for Thermal Dynamics Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY
More informationNERTAJET & NERTAJET HP
NERTAJET & NERTAJET HP Automatised plasma cutting range by Air Liquide Welding 2009-300 NERTAJET HP range High accuracy and productivity CPM400-450-600wi NERTAJET HP range Heavy power CPM720-900 Power
More informationPH-70. plasma cutting torches A-PH A-TH. Technical Data Current : Amps Duty Cycle: 70 Amps 50%
2017-05-A-TH Technical Data Current : 20-70 Amps Duty Cycle: 70 Amps 50% Gas: Air/N2 Gas Pressure - Cutting: 72-80 PSI (5.0-5.5 bar) - Gouging: 58-65 PSI (4.0-4.5 bar) Gas Flow at 70A: 390 scfh (185 lpm)
More informationCut Charts and Marking Charts
WARNING EXPLOSION HAZARD CUTTING WITH ALUMINUM NEAR WATER Do not cut aluminum alloys underwater or on a water table unless you can prevent the accumulation of hydrogen gas. Never cut aluminum-lithium alloys
More informationPlasma Cutting Torches
PT-60 Plasma Cutting Torches Model Plasma cutting torch Current range Duty cycle 80% Gas Gaspressure Gasflow Ignition Accessories Circle cutting attachment 19460180 Cutting guide 19460182 PT-60 with coaxialcable
More informationMASTER XL PLUS PLASMA CUTTING SERIES
New Products PAK MASTERXL PLUS PLASMA CUTTING SERIES 3 Year Warranty PAK MASTER 50 XL PLUS GENUINE CUT 1/2 (13mm) SEVERANCE CUT 3/4 (19mm) PAK MASTER 75 XL PLUS GENUINE CUT 3/4 (19mm) SEVERANCE CUT 1 (25.4mm)
More informationSelecting the Right Torch Package for Your Needs...It s as easy as 1, 2, 3!
1Torch The First Universal Plasma Torch! The 1Torch RPT torch is the fi rst plasma cutting torch that performs with virtually all plasma cutting power supplies. The 1Torch works with high frequency start
More informationCUTMASTER A-SERIES AUTOMATED PLASMA CUTTING SYSTEMS. We Bring Intelligence to the Table. Victor Thermal Dynamics introduces
AUTOMATED PLASMA CUTTING SYSTEMS ictor Thermal Dynamics introduces CUTMASTER A-SERIES The Cutmaster A-Series is the intelligent solution for economical and flexible plasma cutting with the proven reliability
More informationPLASMA. Product Catalogue 1.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 1.0/V1 www.binzel-abicor.com Content PLASMA-Cutting Torches Plasma-Cutting Torches ABIPLAS CUT air-cooled Page 04 05 ABIPLAS
More informationOne Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility. Available With Our ATC
One Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility Available With Our ATC Quick Change Connector! The Revolution in Plasma Torches Has Begun Introducing the First Universal
More informationPatent pending. Patented
Patent pending Patented Quick Disconnect Manual Mechanized Automated EASY FIT EASY FIT EASY FIT 2018-01-A PHTD plasma cutting t RPT-T RPT-T for TD 1TORCH Esab Thermal Dynamics Victor SL-60 & SL-100 QD
More informationESP-200. Plasmarc Cutting System. Instruction Manual
ESP-200 Plasmarc Cutting System Instruction Manual F15-462-C 02 / 2008 Be sure this information reaches the operator. You can get extra copies through your supplier. caution These INSTRUCTIONS are for
More informationA Single RPT Torch for Any Plasma Systems from 30 to 120 Amp.
INTRODUCES A Single RPT Torch for Any Plasma Systems from 30 to 0 Amp. The new Patent Pending torch with and without High Frequency Start Patent Pending With ith Technology Higher performances Cleaner
More informationProduct Data Sheet Metco F4MB-XL Series
Product Data Sheet Metco F4MB-XL Series Metco F4MB-XL series plasma spray guns are the latest generation of Oerlikon Metco s F4MB, which have been redesigned for improved robustness, yet retain all aspects
More informationSection 4 OPERATION. In this section: HPR400XD Auto Gas Instruction Manual 4-1
Section 4 OPERATION In this section: Daily start-up...4-2 Check torch...4-2 Power indicators...4-3 General...4-3 Power supply...4-3 ion console...4-3 Metering console...4-3 CNC controller requirements...4-4
More informationHypertherm. Hypertherm Torches. Plasma and Accessories MAX20 MAX40CS, MAX42, MAX43 MAX40
Hypertherm Torches Hypertherm MAX0 MAX0CS, MAX, MAX MAX0 9 0 009 Swirl ring 00 Electrode, extended 00 Nozzle, extended 00 Retaining cap T-* Swirl ring T-* Electrode, extended T-0* Electrode 00 Nozzle,
More informationDuramax torch and consumables. For the Powermax45
Duramax torch and consumables For the Powermax Powermax Duramax hand/machine consumables Minimum order quantity Consumable type Torch type Shield/deflector Retaining cap Nozzle Electrode Swirl ring Drag-cutting
More informationConsumable type Torch type Shield/deflector Retaining cap Nozzle Electrode Swirl ring (45 A)
Powermax0 Duramax hand/machine torch consumables Minimum order quantity Consumable type Torch type Shield/deflector Retaining cap Nozzle Electrode Swirl ring 0 ( A) 09 ( A) 0 ( A) Drag-cutting (0 0 A)
More informationPTE-100H PTE-100M Plus
The new series of Torches without High Frequency Start With EASY FIT A revolutionary solution to save time and money PTE-100H PTE-100M PTE-105HPlus Plus PTE-105MPlus Plus THE-125 TME-125 Higher performances
More informationGenie Products. Thermal Spray Torches and Replacement Parts
Genie Products Thermal Spray Torches and Replacement Parts Thermal Spray Torches and Replacement Parts Genie Products is a recognized leader in the production and supply of precision engineered replacement
More informationArc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources
Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources FP90 Enjoy the ease of wire feed welding at an affordable price. This unit operates on standard 115 volt household current and requires no
More informationMUST BE UL LISTED or EQUIVALENT
1 01 2 PKG MIG WELDER Rated Output: 200 Amps at 28 VDC 60% Duty Cycle or 250 A, 28 VDC at 40% Duty Cycle Max Open-Cicuit Voltage: 38 Wire Feed speed: 50-700 IPM Package includes: #MMM252 (#907321) Welder
More informationTORCH SYSTEM PAGE MAX40 /HT MAX70,MAX80,MAX ,25. POWERMAX 190c /350 / PAC123T /M,PAC121, PAC125 POWERMAX 600 /800 /900...
TORCH SYSTEM PAGE PAC110 /PAC121 /120 PAC140 PAC130 PAC160 PAC105,PAC110, PAC110T MAX20,MAX40CS,MAX42,MAX43...22 MAX40 /HT40...23 MAX70,MAX80,MAX100...24,25 MAX100D...26 POWERMAX 190c /350 /380...27 PAC123T
More informationPAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation
MASTERXL PLUS- Air Plasma Cutting Systems 3 Year Warranty PakMaster 50XL PLUS-CE GENUINE CUT 12.7mm ( 1 2 ) SEVERANCE CUT 19.1mm ( 3 4 ) PakMaster 75XL PLUS-CE GENUINE CUT 19.1mm ( 3 4 ) SEVERANCE CUT
More informationPlasma Arc Cutting. Introducing: MANUAL SYSTEMS, TORCHES & ACCESSORIES QUICK REFERENCE PRODUCT GUIDE
Plasma Arc Cutting MANUAL SYSTEMS, TORCHES & ACCESSORIES QUICK REFERENCE PRODUCT GUIDE June 2006 Introducing: The Portable Drag-Gun Plus with Built-in Air Compressor (see page 5) www.thermal-dynamics.com
More information2018 torch and consumables catalog. For mechanized plasma systems
2018 torch and consumables catalog For mechanized plasma systems Contents 2 Hypertherm technology benefits 4 XPR300 6 XPR300 consumables 7 XPR300 torch assembly options 8 HyPerformance Plasma HPRXD 10
More informationTotal Plasma Cutting Flexibility. One Torch for Virtually Any Plasma Cutting System! Take the Challenge. Available With Our ATC
MANUAL SYSTEMS REPLACEMENT PLASMA CUTTING TORCH One Torch for Virtually Any Plasma Cutting System! Take the Challenge 30 Days, 100% Satisfaction or Your Money Back, Guaranteed! Call 1-800-752-7621 for
More informationConsumables for Kjellberg systems Excellent performance, speed and quality at a competitive price
Consumables for Kjellberg systems Excellent performance, speed and quality at a competitive price Contents 2 SilverLine and CoolFlow technologies 3 Consumables for Kjellberg HiFocus 100 and 130/160i using
More informationMinimum order quantity
Powermax Duramax hand/machine torch consumables Minimum order quantity Consumable type Torch type Shield/deflector Retaining cap Nozzle Electrode Swirl ring 09 ( A) Drag-cutting (0 A) Hand 0 0 09 ( A)
More informationTWIN WIRE ARC SPRAY SYSTEM, MODEL: ARCJET -99/600
TWIN WIRE ARC SPRAY SYSTEM, MODEL: ARCJET -99/600 EQUIPMENT DESCRIPTION : The Arc Spray Unit; Model : 99/600 combines typical features of the arc spray technology such as reliability and robustness with
More informationMAXPRO200 Instruction Manual Revision 2 99 Estimated kerf-width compensation The kerf widths in the following charts are for reference. Differe
Hypertherm Dross Low-speed dross forms when the torch s cutting speed is too slow and the arc shoots ahead. It forms as a heavy, bubbly deposit at the bottom of the cut and can be removed easily. Increase
More informationPatent pending. Patented
Patent pending Patented Quick Disconnect Manual Mechanized Automated EASY FIT EASY FIT EASY FIT 2018-01-A PHTD 2018-10 A PHTD RPT-T RPTches for TD 1TORCH Esab Thermal Dynamics Victor SL-60 & SL-100 QD
More informationSection 4 - Plasma cutting General information and choice criteria
Section 4 - Plasma cutting General information and choice criteria 909-0 The new range of plasma cutting equipment developed by SAF-FRO heralds a technological revolution in the field of compressed air
More informationHyPro2000 Quick Disconnect HT2000 Torch Upgrade
HyPro2000 Quick Disconnect HT2000 Torch Upgrade Field Service Bulletin 806550 Revision 4 September 2013 Hypertherm, Inc. Etna Road, P.O. Box 5010 Hanover, NH 03755 USA 603-643-3441 Tel (Main Office) 603-643-5352
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationOWNER S MANUAL Use above FORM number when ordering extra manuals.
OWNER S MANUAL OM-9 8T Use above FORM number when ordering extra manuals. 00 08 ICE-C, ICE-C, ICE-CX, ICE-C, ICE-T ICE-0C, ICE-0C, ICE-0CM, ICE-C, ICE-CM, ICE-80C, ICE-80CM, ICE-80CX, ICE-80CXM, ICE-80T,
More informationVERSA-CUT 60 PLASMA CUTTER
Part #14099 VERSA-CUT 60 PLASMA CUTTER ASSEMBLY & OPERATING INstructions (PDF version available at eastwood.com/14099manual) Our Eastwood-designed Versa-Cut 60 Plasma Cutter is your smartest choice for
More informationRepeatable welds again, and again, and again
INERTER DC CC 150 Repeatable welds again, and again, and again 5 Year * Ultima 150 comes with: Ultima 150 unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma
More informationPLASMA CUTTING SINCE 1950
PLASMA CUTTING 2018 SINCE 1950 A STORY WHICH STARTED IN 1950 Even before its inception in 1950 CEA machines had garnered a reputation for quality craftsmanship prior to World War II and today CEA is renowned
More informationGouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts.
Arc Welding Equipment Gouging Electrodes Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts. DC Jetrod Copperclad
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () MIG
More informationPlasma Cutting. Futuris Plasma torches and replacement parts are not genuine OEM products. Reference to OEM parts is for ease of use only.
Binzel Style Plasma Spares 82-83 Cebora Style Plasma Spares 84-87 Hypertherm Style Plasma Spares 88-91 Thermal Dynamics Style Plasma Spares 92-95 Trafimet Style Plasma Spares 96-99 Plasma Cutting Futuris
More informationT e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG. Product Catalogue 3.1 / V1.
T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG Product Catalogue 3.1 / V1 www.binzel-abicor.com Content TIG Welding Torches TIg Welding Torches ABITIg grip air and liquid cooled Page 04
More informationHySpeed HT4400. Plasma Arc Cutting System. Product Configuration Manual Revision 1. Cables Gas Hoses Coolant Hoses
HySpeed HT4400 Plasma Arc Cutting System Product Configuration Manual 803740 - Revision 1 1 5 3 4 2 15 6 8 16 17 7 12 11 10 9 19 22 20 14 13 21 Cables Gas Hoses Coolant Hoses System components not drawn
More information3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range
PowerMaster Range Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationGO-FER. One Machine for All Applications!
412-331-1776 www.bugo.com GO-FER IV 3 Year Warranty One Machine for All Applications! Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. The GO-FER IV
More informationAir Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems. Gouging & Cutting Products & Accessories
Air Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems Gouging & Cutting Products & Accessories Gouging & Cutting Products & Accessories EXTREME Air Carbon Arc Gouging Torches Angle-Arc
More informationPT-32EH PLASMA ARC CUTTING TORCHES. Instruction Manual (GB)
PT-32EH PLASMA ARC CUTTING TORCHES Instruction Manual (GB) 0558003746 BE SURE THIS INFORMATION REACHES THE OPERATOR. YOU CAN GET EXTRA COPIES THROUGH YOUR SUPPLIER. These INSTRUCTIONS are for experienced
More informationCUTMASTER, Why TRUE? THREE YEAR WARRANTY. Thermal Dynamics Professional: When cutting and welding is your business WHEN YOU NEED IT.
CUTMASTER, Why TRUE? The CUTMASTER TRUE Series has been designed with the premise that recommended cut capacity should reflect the TRUE cut capacity. The TRUE Cut Series eliminates the concept of having
More informationvictor thermal dynamics cutmaster true series
victor thermal dynamics Victor Thermal Dynamics CUASTER, Why TRUE? The CUASTER TRUE Series has been designed with the premise that recommended cut capacity should reflect the TRUE cut capacity. The TRUE
More informationPT-36R Mechanized Plasmarc Cutting Torch
PT-36R Mechanized Plasmarc Cutting Torch Instruction Manual (EN) 0558006984 02/2011 Be sure this information reaches the operator. You can get extra copies through your supplier. caution These INSTRUCTIONS
More informationGO-FER. One Machine for All Applications!
412-331-1776 www.bugo.com GO-FER IV 3 Year Warranty One Machine for All Applications! Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. The GO-FER IV
More informationPowercut Spare parts list. Edition Valid for serial no. 001-xxx-xxxx, 034-xxx-xxxx
Spare parts list Edition 20111010 Valid for serial no. 001-xxx-xxxx, 034-xxx-xxxx Ordering no. Product 0558 007 636 Powercut 1600, 400V 0558 007 637 Powercut 1600, 400V 25ft 0558 007 237 Powercut 1600,
More informationRFP # Welding Equipment, Supplies, and Bottled Gas SHELF OR CATALOG DISCOUNT
RFP #17-04-04 - Welding Equipment, Supplies, and Bottled Gas Commodity #450-042 Expires: July 2020 Bid Reference: RFP #17-04-04 Commodity: #450-042 Buyer: Janet Bradley Bid Reference: RFP #17-04-04 Expries:
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One!
Millermatic 212 Auto-Set Issued Oct. 2008 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More informationAUTOMATIC GIRTH WELDERS Single and Double Sided Models
AUTOMATIC GIRTH WELDERS Single and Double Sided Models Features Energia Red-D-Arc / Ransome s AGW Automatic Girth Welder is an automatic system that speeds up construction of field-erected storage tanks.
More information2013 torch and consumables catalog. For mechanized plasma systems
2013 torch and consumables catalog For mechanized plasma systems Hypertherm, Inc. Etna Road, P.O. Box 5010 Hanover, NH 03755 USA 603-643-3441 Tel (Main Office) 603-643-5352 Fax (All Departments) info@hypertherm.com
More informationAUTOMECH MACHINES & TOOLS TRADING EST.
1. CNC PLASMA CUTTING MACHINE Model: APM HPR 260XD------- Made In Turkey (brand new) Technical Specifications: Cutting Width Cutting Length : as per table size of actual requirement : as per table size
More informationXL9 E-S Serial number N for XL9 E Edition 2005
XL9 E-S MODEL MAIN UNIT 1 ILLUSTRATED PARTS BREAKDOWN Serial number N.25600202 for XL9 E Edition 2005 1-10 1-10 1-1 1-9 1-8 1-2 1-3 1-7 1-11 1-4 1-5 1-12 1-6 XL9 E-S MODEL MAIN UNIT 2 ILLUSTRATED PARTS
More informationPowermax Selection Guide
Powermax Selection Guide Handheld and mechanized plasma systems for cutting and gouging metal Contents 3 Hypertherm: Company overview 5 Understanding plasma technology 6 Why choose Powermax over oxyfuel
More informationGANTRY TYPE CNC PLASMA CUTTING MACHINE Model: GSII-4000
GANTRY TYPE CNC PLASMA CUTTING MACHINE Model: GSII-4000 MACHINE STRUCTURE: TECHNICAL DATA: ITEM DESCRIPTION GSII-4000+PMX105 MACHINE BODY CUTTING TORCH Main Frame Machine Size (mm) Effective Cutting Area
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz
Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More informationINSTRUCTION MANUAL FOR PLASMA CUTTER
INSTRUCTION MANUAL FOR PLASMA CUTTER IMPORTANT: BEFORE STARTING THE EQUIP- MENT, READ THE CONTENTS OF THIS MANUAL, WHICH MUST BE STORED IN A PLACE FAMILIAR TO ALL USERS FOR THE ENTIRE OPERATIVE LIFE-SPAN
More informationVIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018
VIPER 150 - Multi-Function Inverter Welder-MIG-MMA 30-150 Amps #KUMJRVM150 Ex GST Inc GST $430.00 $473.00 $400.00 $440.00 Special Ends 31/12/2018 ORDER CODE: W245 MODEL: VIPER 150 Type: MIG / MMA & Multifunction
More informationCutSkill GAS EQUIPMENT RANGE TRADESMAN GAS KITS BLOWPIPE CUTTING ATTACHMENT ST400 TORCH REGULATORS FLOWMETERS FLASHBACK ARRESTORS CUTTING NOZZLES
GAS EQUIPMENT RANGE TRADESMAN GAS KITS BLOWPIPE CUTTING ATTACHMENT ST400 TORCH REGULATORS FLOWMETERS FLASHBACK ARRESTORS CUTTING NOZZLES CIGWELD.COM.AU GAS CUTTING & WELDING KITS TRADESMAN CUTTING & WELDING
More informationPrecision TIG 375. The Power To Perform! Advantage Lincoln TIG WELDERS. Output. Input 1 PHASE. Publication E /05
TIG WELDERS Precision TIG 375 The Power To Perform! The Precision TIG TM 375 delivers the Power to Perform setting a new standard in Square Wave Technology. Combining outstanding value-added features and
More informationGENERAL WELDING PRODUCTS CATALOG
GENERAL WELDING PRODUCTS CATALOG The Thermadyne Specialty Markets group operates within multiple distribution channels to meet the needs of several distinct industry segments. Specialty Markets These
More information1500 Group Tips One-Piece Acetylene
One-Piece Acetylene 502 Series Hand or Machine Tips Preheat Cleaning in. mm in. mm Holes Preheat in. m /4 6 /4 6 08Z67 6 69 68.7 /2 3 /2 24 5Z7 6 66 60.5 -/2 38 -/2 38 5Z8 6 65 53.3 2-4 50-00 4 02 5Z9
More informationCATALOGUE. Valid from 15 June Weldwide Solutions Limited Product Catalogue
CATALOGUE Valid from 15 June 2011 1 CONTENTS Weld Purging Products 3 Weld Gas Analysers 3 Weld Gas Analyser spares and maintenance 4 Inflatable Purge Systems 5 Ring Purge 6 Multi-size Ring Purge 6 Rigid
More informationTough, Compact... and Portable
INERTER Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW)** Flux Cored
More informationMost popular of all chain machines, the lightweight Mini Chain
Chain Cutting and Beveling Machines Mini Chain Machine MINI Chain Machine Includes: Base machine Torch arm Service keys Sliding support Hose support Torch holder Service keys Parts and operating manual
More informationteambrite Supply Steambrite Supply Created on: : Saturday 06 April, 2019
Model Number: 500566 Hobart AirForce 500566 Hobart AirForce 40i Plasma Cutter â 230V, 40 Amps Output Model FREE SHIPPING Manufacturer: Hobart Hobart AirForce 500566 Hobart AirForce 40i Plasma Cutter 230V,
More informationDUAL VANTAGE 800 ENGINE-DRIVEN WELDER/GENERATOR
DUAL VANTAGE 800 ENGINE-DRIVEN WELDER/GENERATOR The Power of Two On the construction site, along the pipeline or in any other rugged environment, welding must get done on time and with minimal rework.
More informationAutomated Oxy-Fuel Cutting Systems
It s time to innovate Oxy-Fuel cutting. The next step in Oxy-Fuel Cutting from the market leaders! Automated Oxy-Fuel Cutting Systems FIT+ with tool free nozzle exchange FIT+ two with integrated ignition
More informationMiller Legend 301 G. The Power of Blue. Quick Specs. Gas Engine-Driven Welder/Generator
Miller Legend 301 G Issued December 2002 Index No. ED/4.2 Gas Engine-Driven Welder/ Quick Specs Industrial Applications Fabrication Structural Steel Process Plant Piping Maintenance Processes (X-Ray Quality)
More informationtorch and consumables catalog. For mechanized plasma systems
2013 2014 torch and consumables catalog For mechanized plasma systems Hypertherm, Inc. Etna Road, P.O. Box 5010 Hanover, NH 03755 USA 603-643-3441 Tel (Main Office) 603-643-5352 Fax (All Departments) info@hypertherm.com
More informationRepeatable welds again, and again, and again
INERTER CC DC AMP 575 Repeatable welds again, and again, and again 5 Year * Ultima comes with: Ultima unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma Arc
More informationPowermax Selection Guide
Powermax Selection Guide H a n d h e l d a n d m e c h a n i z e d p l a s m a s y s t e m s f o r c u t t i n g a n d g o u g i n g m e t a l Contents 3 Hypertherm: Company overview 5 Understanding plasma
More informationGANTRY TYPE CNC PLASMA CUTTING MACHINE MODEL : GSII
GANTRY TYPE CNC PLASMA CUTTING MACHINE MODEL : GSII - 4000 TECHNICAL DETAILS : ITEM DESCRIPTION GSII-4000+PMX105 MACHINE BODY CUTTING TORCH Main Frame Machine Size (mm) Effective Cutting Area (mm) Optional
More information