High. Performance. WK line system. hydraulic systems. Gear Pump With Integrated Tipping Valve
|
|
|
- Beverly Joseph
- 5 years ago
- Views:
Transcription
1 WK line system High Performance hydraulic systems Gear Pump With Integrated Tipping Valve Multiple pump options with air shift, cable shift or hydraulic tipping valve gallon hydraulic oil reservoir with mounting brackets Pneumatic or manual hoist control 27 GPM with up to 3000 psi hydraulic system For operation of dump trucks and dump trailers Ph: Fax:
2 Hydraulic Pump PVB series High Performance C102 Pump Replacements Compact design Light weight (49 lbs.) High grade cast iron pump body Two piece design High performance 97% efficiency rating Optional dual pressure relief Left and right hand rotation SAE B 4 bolt flange mounting High pressures up to 3000 psi Air and manual shift 2 line or 3 line system installation High pressure front seal C lbs. 2-1/2" Longer 3/8" Wider 20 LBS. LIGHTER! PVB 49 lbs. 2-1/2" Shorter 3/8" Thinner Manual Shift Air Shift Direct Mount Bushing Dump Pump PART NUMBER DESCRIPTION SHAFT GEAR INLET PRESSURE & RETURN PORT CHPVB102-LMS-25 Manual Shift Left Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT CHPVB102-RMS-25 Manual Shift Right Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT CHPVB102-LAS-25 Air Shift Left Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT CHPVB102-RAS-25 Air Shift Right Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT FLOW (GPM) FLOW - SPEED SPEED (RPM) % EFFICIENCY VOLUMETRIC EFFICIENCY GPM PSI POWER (HP) POWER - PRESSURE - GPM GPM PSI
3 Hydraulic Pump PV series Economical C102 Pump Replacements Cast iron pump body Heavy duty roller bearings Left and right hand rotation SAE B 4 bolt flange mounting High pressures up to 2250 psi Air and manual shift Adjustable relief valve High pressure front seal Chrome steel valve spool 2 line or 3 line system installation Manual Shift Air Shift Direct Mount Dump Pump PART NUMBER DESCRIPTION SHAFT GEAR INLET PRESSURE & RETURN PORT CHPV102-LMS-25 Manual Shift Left Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT CHPV102-RMS-25 Manual Shift Right Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT CHPV102-LAS-25 Air Shift Left Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT CHPV102-RAS-25 Air Shift Right Hand Rotation 7/8" 13 Tooth 2.5" (6.2 cu in) 1-1/4" NPT 1" NPT FLOW (GPM) FLOW - SPEED SPEED (RPM) % EFFICIENCY VOLUMETRIC EFFICIENCY GPM PSI POWER (HP) POWER - PRESSURE - GPM GPM PSI
4 Hydraulic Reservoir Assembly (upright mount) Steel or aluminum construction with diamond plate top section Steel finish: black powder coated Aluminum finish: bright polished Fully baffled with two heavy duty NPT bottom ports Features filtered mushroom vent for increased air exchange Filler/breather assembly including 40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure Dual mounting rails (2" 2") welded to tank assembly Sight/temperature gauge standard ITEM DESCRIPTION QTY 1 1-1/2" Hose Adapter /2" Ball Valve /2" Elbow 1 4 2" 1-1/2" Reducer 1 5 Pipe Plug 2.00 NPTF 1 6 Oil Level Indicator 1 7 Breather/Filler 1 8 Vent 1 9 Bolt, 5/8-11 UNC X 4-1/2 LG Flatwasher, Ø 5/ Compression Spring 4 12 Lock Nut, 5/ Rubber Mounting Pads 4 14 Mounting Angles 4 PART NUMBER DESCRIPTION MATERIAL CYLINDER OIL EXTENDED CAPACITY THREE BOTTOM PORTS WEIGHT HRA-1-50-UMS 50 Gallon Upright Mount Steel 40 gallon 2" NPT 150 lbs. HRA-1-50-UMS-ST 50 Gallon Upright Mount w/ Temp Gauge Steel 40 gallon 2" NPT 150 lbs. HRA-1-50-UMA 50 Gallon Upright Mount Aluminum 40 gallon 2" NPT 77 lbs. HRA-1-50-UMA-ST 50 Gallon Upright Mount w/ Temp Gauge Aluminum 40 gallon 2" NPT 77 lbs. HRA-1-70-UMS 70 Gallon Upright Mount Steel 56 gallon 2" NPT 200 lbs. HRA-1-70-UMS-ST 70 Gallon Upright Mount w/ Temp Gauge Steel 56 gallon 2" NPT 200 lbs. HRA-1-50-UMA 70 Gallon Upright Mount Aluminum 56 gallon 2" NPT 130 lbs. HRA-1-70-UMA-ST 70 Gallon Upright Mount w/ Temp Gauge Aluminum 56 gallon 2" NPT 130 lbs.
5 Hydraulic Reservoir Assembly (Round Saddle Mount) Steel or aluminum construction Steel finish: black powder coated Aluminum finish: bright polished Three heavy duty NPT bottom ports with built in diffusers Features filtered mushroom vent for increased air exchange Filler/breather assembly-including 40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure Includes mounting kit with J-brackets and stainless steel straps Sight/temperature gauge standard ITEM DESCRIPTION QTY 1 1-1/2" Hose Adapter /2" Ball Valve /2" Elbow 1 4 2" 1-1/2" Reducer 1 5 Oil Level Indicator 1 6 Breather/Filler 1 7 Vent 1 8 Pipe Plug 2.00 NPTF 2 9 Straps 2 10 J-Bracket 2 11 Bolt, 1/2-13 UNC X 2-1/2 LG Flatwasher, Ø 1/ Lock Nut, 1/ PART NUMBER DESCRIPTION MATERIAL CYLINDER OIL EXTENDED CAPACITY THREE BOTTOM PORTS WEIGHT HRA-1-35-RSMS 35 Gallon Round Saddle Mount w/ Carbon Straps Steel 28 gallon 2" NPT 106 lbs. HRA-1-35-RSMA 35 Gallon Round Saddle Mount w/ Carbon Straps Aluminum 28 gallon 2" NPT 76 lbs. HRA-1-35-RSMA-SS 35 Gallon Round Saddle Mount w/ Stainless Straps Aluminum 28 gallon 2" NPT 76 lbs. HRA-1-50-RSMS 50 Gallon Round Saddle Mount w/ Carbon Straps Steel 50 gallon 2" NPT 124 lbs. HRA-1-50-RSMA 50 Gallon Round Saddle Mount w/ Carbon Straps Aluminum 50 gallon 2" NPT 84 lbs. HRA-1-50-RSMA-SS 50 Gallon Round Saddle Mount w/ Stainless Straps Aluminum 50 gallon 2" NPT 84 lbs.
6 Hydraulic Reservoir Assembly (Side Mount) Steel or aluminum construction Steel finish: black powder coated Aluminum finish: bright polished 1-1/2" BSP suction port 1" BSP return port (plugged) Filler/breather assembly including 40 micron filter/breather cap with strainer basket Includes mounting kit with J-brackets and stainless steel straps Oil level sight gauge standard PART NUMBER DESCRIPTION MATERIAL CYLINDER OIL EXTEND CAPACITY HRA-1-35-SMA-SS 35 Gallon Side Mount w/ Stainless Straps Aluminum 28 gallon HRA-1-35-SMS-SS 35 Gallon Side Mount w/ Stainless Straps Steel 28 gallon
7 Hoist Control Pneumatic Controlled lowering Automatic disengagement of PTO in lower position (PTO Kickout) Safety latch on PTO switch to prevent accidental engagement Brighter PTO LED light Push to connect fittings Light RD + (Fuse) BLK - (PTO) Lift collar to move Handle to LIFT & LOWER position Non-functioning Port Bottom of Shifter IN EX LOW TIP PTO Air control valve must be fitted inside a waterproof housing when installed outside of driver s cab Air Supply Must be tapped into pressure-protected valve Cylinder Valve Pump Air Line WARNING! This piping circuit is for PRESSURE-PROTECTED air systems ONLY. If the air system is not pressure-protected, a pressure protection valve must be fitted into the auxiliary line recommended by the chassis manufacturer PTO OPERATION Engage PTO ONLY when pump/valve lever is in HOLD Depress clutch for 4 seconds before engaging PTO PTO automatically disengages when pump/valve lever is in LOWER Put pump/valve lever in HOLD when body is down Auto PTO disengagement: It is important when fitting PTO to gearbox to check that PTO sliding wheel is air-operated into mesh and disengaged by spring return. PTO Air Exhaust Air exhaust tube to outside of cab PART NUMBER DESCRIPTION PTO KICKOUT DEAD MAN HANDLE (Spring to Neutral) CONTROL TOWER HCP Metering Hoist Control Yes No No HCP-1-295M Metering Hoist Control No No No HCP-1-295DMH Metering Hoist Control Yes Yes No HT-8 Hoist Control Tower No No 8" HT-13 Hoist Control Tower No No 13"
8 Hydraulic Cylinders 1500 Trunnion Mounting 2000 Trunnion Eye Mounting 2500/ 2600 Pin Eve Mounting 3000 Trunnion Pin Ported 4000 Pin-to-Pin Mounting Rod Cylinder Custom Hoists produces the widest range of telescoping and rod cylinders in the industry designed to work in tune with our wet kits and pumps. We offer European and traditional head nut designs in a wide range of sizes and mounting configurations to fit your needs. Contact us today to learn how we can provide full system hydraulic solutions for all your lifting needs. Custom Hoist, Inc. 771 Rt. 30A West Ashland, OH 44805, U.S.A. Ph: Fax: Custom Hoist Hydraulics (Tianjin) Co., Ltd. 61# Huasheng Road Beichen High-Tech Industrial Park Tianjin , China Ph: (86) Fax: (86)
Parker Wetline Reservoirs
Parker Wetline Reservoirs Overview: Will my wetline components work together properly? Will they hold up day-in and day out? These concerns can be eliminated by ordering a complete wetline system. Featuring
Website: ELIMINATOR MD. (701) (800)
Website: www.tbei.com E-mail: sales@tbei.com ELIMINATOR MD www.rugbymfg.com sales@rugbymfg.com (701) 776-5722 (800) 533-0494 1228633 1 DATE PURCHASED BODY SERIAL NUMBER HOIST SERIAL NUMBER CYLINDER SERIAL
HYDRAULIC CATALOG COMPONENTS & KITS
HYDRAULIC CATALOG COMPONENTS & KITS REVISED 07/2018 TABLE OF CONTENTS Item Page Lift Cylinders 3 Lift Cylinder Bleeders 4 Lift Cylinder Connection Parts Pumps 5 Pump Components 6 Controlled Diverting Valves
POWER TAKE OFF S 1000/2000 SERIES 1200 SERIES 1000 SERIES 3100/3150/3250 SERIES 3250 SERIES 2000 SERIES 3000 SERIES 3100 SERIES
talogo_usa_maquetación 1 31/01/2014 14:14 Página 1 atalogo_usa_maquetación 1 31/01/2014 14:14 Página 2 POWER TAKE OFF S 1000/2000 SERIES 1200 SERIES Our 1000 and 2000 series PTO s have been engineered
MARATHON TELESCOPIC HOIST
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S MARATHON TELESCOPIC HOIST this manual must be included with the vehicle after completing the installation. Web Site E-Mail Phone (507) 726-2728 www.crysteel.com
3.2 UTLI41A AND UTLI46A GENERAL SPECIFICATIONS
3.2 UTLI41A AND UTLI46A GENERAL SPECIFICATIONS The UTEM SkyTel UTLI41A or UTLI46A is an insulated telescoping aerial lift available with either a side mounted single man platform or an end mounted single
HIGH VELOCITY PUMP PUMP END
HIGH VELOCITY PUMP USFP pumps are designed for firefighting and high volume water supply in industrial, oil and gas, nuclear, municipal, and marine applications. The USFP High Velocity Pump is designed
AMERICAN MOBILE POWER VOL.10
AMERICAN MOBILE POWER VOL.10 STEEL POLYETHYLENE ALUMINUM STAINLESS TANKS YOUR JUST-IN-TIME SUPPLIER DISTRIBUTOR PROGRAM Wet Tank Systems American Mobile Power has developed a line of Hydraulic Wet Tank
12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
F SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc.
ALL NEW DESIGN F SERIES GEAR PUMP ALL NEW DESIGN Ultimate power and performance in a small package best describes the all new F Series gear pumps. Designed exclusively for those low flow applications.
PNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR Automax S-Series DOUBLE ACTING SPRING RETURN 1 Integral travel stops in both directions with 10 degrees of overtravel to assure precise adjustment of both the open and
12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
Note: This transmission will be controlled with a pnuematic shifter and controler. There is no cable shift available.
U P D A T E D : 2-2 8-1 1 SP-500-S POWER UNIT: Installed on the skid will be a Detroit Diesel Series 60 14L Tier 3 certified engine rated 600HP @ 2100 RPM. n Heavy duty suction fan with direct drive n
MICRO RAIN 50,58,&63 SPARE PARTS MANUAL JANUARY 1, 2005
MICRO RAIN 50,58,&63 SPARE PARTS MANUAL JANUARY 1, 2005 Sheilding, Wheel Assys, Front Hitch Assy. Shielding,Wheel Assys, Front Hitch Assy. Ref. Part # Description Qty. 1 MR-88052112/8 Outer Chain Cover
LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.)
LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.) 1 23-55-0021 NYLON FLAIL BRUSH ROTOR COMPL. 1 2 23-25-2400 ROTOR SHAFT (48 7/8" LG) 1 3 23-22-1400 HAMMER SUPPORT 90 4 NC17-46-0020 NYLON HAMMER
Fittings & Accessories
Fittings & Accessories 176 AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) FAX 800.531.7335 (330.264.2944) www.akronbrass.com 630 Angle Elbow SWIVEL FEMALE x MALE 2 1 2" & 3" sizes in 30 (64 & 76 mm)
Monarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.
Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve
LOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS
LOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS Muncie Power Products, Inc. is a proud manufacturer of power take-offs and fluid power components for applications within the
Threaded Adapters for Creating Tank Breathers. Element Attachment. Thread. O-Ring (Buna-N) Aluminum Construction. Male Pipe.
Reservoir Breathers Breathers are available in a variety of styles, materials and sizes. Breathers provide clean airflow into reservoirs and other storage containers where there is an exchange of air during
DIRECT MOUNT PUMP INSTALLATION AND OPERATION MANUAL (Valve/Reservoir: W15-8CR-21 QT Pump: GP2041)
TRUCK BODIES & EQUIPMENT INTERNATIONAL, Inc. Website: www.tbei.com E-mail: sales@tbei.com Phone: 1-800-869-9162 Rugby 1-800-533-0494 Crysteel 1-800-255-4345 Heil DIRECT MOUNT PUMP INSTALLATION AND OPERATION
CRYSTEEL S HOIST. this manual must be included with the vehicle after completing the installation.
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S STINGRAY HOIST this manual must be included with the vehicle after completing the installation. Web Site E-Mail Phone (507) 726-2728 www.crysteel.com
LEGACY U-SERIES ROLL-OFF CABLE HOISTS Tel:
LEGACY U-SERIES ROLL-OFF CABLE HOISTS Tel: 800.285.0666 sales@wastequip.com www.galbreathproducts.com Outside Rail (OR) roll-off cable hoists are the most commonly used models in the industry. They are
DUAL PIVOT HOOK HOISTS 54 FIXED HOOK HEIGHT MODELS: U20, U30 & U3-DPHK
DUAL PIVOT Tel: 800.285.0666 sales@wastequip.com www.galbreathproducts.com DUAL PIVOT HOOK HOISTS 54 FIXED HOOK HEIGHT MODELS: U20, U30 & U3-DPHK Dual Pivot Hook Hoists are designed for higher hauling
SECTION # DESCRIPTION PAGE
SECTION # DESCRIPTION PAGE 1 New Products for 2011 2 2 Pneumatic Controls 3-5 3 Customizable Consoles 6-10 4 Top Plates 11-12 5 Electric Tarp Controls 13-14 Specifications are subject to change without
POWERSHIFT TRANSMISSION
1. Specifications... 5-3 2. Structure... 5-4 2.1 Torque converter... 5-4 2.2 Transmission... 5-5 2.3 Power Train Line... 5-6 2.4 Control Valve... 5-7 2.5 Main Regulator Valve... 5-7 2.6 Torque Converter
INSULATED TELESCOPING AERIAL DEVICE SPECIFICATIONS Van Mounted 31July2002
INSULATED TELESCOPING AERIAL DEVICE SPECIFICATIONS Van Mounted 31July2002 It is the intent of the following specifications to set minimum requirements for an INSULATED 29 foot bottom of platform, 34 foot
Lime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive
SPECIFICATIONS CENTURY MODEL 925 HYDRAULIC WRECKER
SPECIFICATIONS CENTURY MODEL 925 HYDRAULIC WRECKER 1.0 GENERAL DESCRIPTION The wrecker shall consist of a recovery boom, wrecker frame, modular type body, and a subframe for mounting to chassis. 1.1 The
Heat treated cylinder wall and chromed piston
JULY AUG SEPT 2015 AXLE OIL DRAIN PAN MODEL 8830 & 8831 Catches Oil from hubs after removing the cap Fits on the rims of buses, trailers and large trucks Prevents an oil mess during wheel repair Side opening
SHUR-LIFT HYDRAULIC CYLINDERS
SHUR-LIFT HYDRAULIC CYLINDERS HIGH QUALITY COMPONENTS HIGH TOLERANCE MACHINING OUTSTANDING HIGH PRESSURE PERFORMANCE DESIGNED TO MEET THE REQUIREMENTS OF A WIDE VARIETY OF APPLICATIONS AGRICULTURAL INDUSTRIAL
AIR OPERATED OIL PUMPS AND KITS
PM 2 PumpMaster 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. Model 24 PumpMaster 2, : ratio stub
MID RISE. INSTALLATION and OPERATION MANUAL MODEL 6000A // 6000E 6,000 LB. CAPACITY. READ and SAVE THIS INSTRUCTION MANUAL
INSTALLATION and OPERATION MANUAL MID RISE MODEL 6000A // 6000E 6,000 LB. CAPACITY READ and SAVE THIS INSTRUCTION MANUAL AUGUST 2005 6-0944 6500 Millcreek Drive Mississauga, Ontario Canada L5N 2W6 1-800-268-7959
Hydrostatic Power Train
Chapter Hydrostatic Power Train Specifications................................................................. -3 Test Specifications........................................................ -3 Repair
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
PHONE: 937/ FAX:
Magnetic Tank Cleaners Multi Magnet Standard or Heavy Duty Lenz magnetic tank cleaners pick up material that ordinary filters miss and thus maintain cleaner oil. The cleaner the oil; the less problems
HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
K & KRM-Series Liftgate Terminology
K & KRM Series K & KRM Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO
POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO DIAPHRAGM PUMP Hydra-Cell Features Heavy-duty industrial construction Quiet, smooth operation Hydraulically balanced diaphragms Runs dry without damage Positive
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
AFD-280U Parts List AFD-280U. (350 gm) (450 gm) (700 gm)
AFD-80U (350 gm) (50 gm) (700 gm) I 0 Major Assemblies, AFD-80U AFD-80U Front View AFD-80U Parts List AFD -80U Front View ITEM P/N DESCRIPTION NO. FUNCTION 036 Hopper Lid Cover for the Fry Hopper. 99 Fry
4-Way Directional Control Valve With Hydraulic Kick Out
Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30
PAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS VC 416 / 516 MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416733 2 IMPORTANT WARNING... 416272 3 BODY PROP AND WARNING / CAUTION DECALS... 416288 4 DECAL LOCATIONS... 416128
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
RL-G70 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to
RL-G70 PARTS LIST # 102693I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to For older hoists use the following: Parts List No. 102692H for Serial Number 2485 to 6596 IF YOUR HOIST DOES NOT FALL WITHIN
Features to Meet Your Specific Needs.
Features to Meet Your Specific Needs. On-Demand Remote Throttle is available with Jerr-Dan Spec d International truck chassis and automatically increases engine speed when a carrier hydraulic function
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
1- Body capacity The minimum capacity of the body, excluding hopper area is:
1- Body capacity The minimum capacity of the body, excluding hopper area is: 10.5 cu.yd. 2- Body dimensions The body is rounded to permit maximum capacity. Inside body width is: Outside body width is:
FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL
B Certificate FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL FC1 FC ISO 91:2 WIT DESIGN #2.2.1 FC1-3/ INLET (IN) FC FCB1-3/ INLET (IN) FCR1-3/ FCR1 INLET (IN) FEATURES: DIAMOND ONED SPOOL BORE
DIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised )
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC8000 (Revised 10-15-2002) Table of Contents Page Saw Controls Legend. 3 Drawing 1. Frame Group. 4-5 Drawing 2. Arm Assembly... 6-7 Drawing 3. Hydraulics
TECHNICAL DATA BROCHURE ZTR 308/3II
Date 8/84 Page 1 of 6 TECHNICAL DATA BROCHURE ZTR 308/3II IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS. ' Seat Adjustment Loosen bolts on sliding brackets under each side of
17 SERIES DIRECTIONAL CONTROL VALVE
17 SERIES DIRECTIONAL CONTROL VALVE 17 GPM (65 LPM) 3,500 PSI (242 Bar) Sectional Type Solenoid Operated Muncie s 17 Series solenoid operated control valves provide flexibility you have never had before.
DEL HYDRAULICS AIR CONTROL CATALOG
DEL HYDRAULICS AIR CONTROL CATALOG www.del.us.com 2 Dump Truck Valves AIR CONTROL VALVES DAV 1201: On-Off Air Valve DAV 1202: Dump Pump Air Valve DAV 1203: Dump Pump Valve with Automatic PTO Disengagement
2575 Roy Street, Sherbrooke QC Canada J1K 1B9 / / Specifications are subject to change without prior notice.
Specifications are subject to change without prior notice. Cat# : 2013-02 Page 1 of 14 SECTION 1 PART NUMBER DESCRIPTION D125-1000-F Detented (stable) lever D125-2000-F Spring return to neutral Pneumatic
PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
TT-12 OWNERS MANUAL/PARTS LIST
TOPLIFTER Tailgates By THIEMAN TT-12 OWNERS MANUAL/PARTS LIST SHOWN WITH OPTIONAL 2 PC. ALUMINUM PLATFORM! IMPORTANT! KEEP IN VEHICLE! PLEASE READ AND UNDERSTAND THE CONTENTS OF THIS MANUAL BEFORE OPERATING
IN-LINE HYDRAULIC FLOW TESTER
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
COMPACT WHEEL LOADERS before PIN BH - before PIN Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES
R Ingersoll HOME COMPACT WHEEL LOADERS 6018 - before PIN 14190349 6018BH - before PIN 14190351 Parts Catalog 8-3052 TRACTORS ATTACHMENTS INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS
TABLE OF CONTENTS. Accessories. Filler Breather 7 Filler Heads 11 Foot Brackets 6 J. Jaw Couplings 9 Jaw Couplings - Dimensions/HP ratings 8 S
accessor i es TABLE OF CONTENTS Accessories F Filler Breather 7 Filler Heads 11 Foot Brackets 6 J Jaw Couplings 9 Jaw Couplings - Dimensions/HP ratings 8 S Strainers 12 Stroke Limiter 3 Subplates 10 BORE
MODEL NO GALLON H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5300431 MODEL NO. 9-150 150 GALLON - 5.5 H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS Pressure Gauge - Adjustable Pressure Range Suction Line Filter Handgun With 25 Feet Of Handgun Hose
VALVE ASSEMBLY. Form No "A" "A" Parts List for: (1/4 N.P.T.F.-REF.) (1/4 N.P.T.F.-REF.)
Parts List for: Form No. 108100 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800)
Operating & Maintenance
TL & C SERIES Operating & Maintenance A B C D E F TO RAISE HOIST 1. Start Engine in neutral 2. Depress the clutch and engage the P.T.O. 3. Release the clutch and open the hydraulic valve. If the pump squeals,
ROLL-OFF CABLE HOISTS Tel: » 30,000 to 75,000 lb. capacity» Single and tandem axle
ROLL-OFF CABLE HOISTS Tel: 800.285.0666 sales@wastequip.com www.galbreathproducts.com OUTSIDE RAIL SERIES Outside Rail (OR) roll-off cable hoists are the most common and versatile hoists in use today.»
Champion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
1500 Series Roll Off Hoist. Owner s Manual (5-06)
1500 Series Roll Off Hoist Owner s Manual (5-06) Section 1: General Information Introduction Safety Information Warranty Information Table of Contents Section 2: Operation Operating the P.T.O. Operating
MODEL HD-P10000 PLANETARY WINCH
OPERATING, SERVICE AND MAINTENANCE MANUAL MODEL HD-P10000 PLANETARY WINCH CAUTION: READ AND UNDERSTAND THIS MANUAL BEFORE INSTALLATION AND OPERATION OF WINCH. SEE WARNINGS! TABLE OF CONTENTS INTRODUCTIONS................................................................1
GS12 Grape Spreader. Illustrated Parts Breakdown
GS Grape Spreader Illustrated Parts Breakdown Page Front End Assembly Page Axle Assembly Page Floor & Apron Page Pump Assembly Page Page Hydraulics Manifold Components Page Gearbox Components S/N - Page
AIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
MB SERIES SMB SERIES MINIATURE TANK BREATHERS MINIATURE TANK BREATHERS ACCCESSORIES. Phone (608) Fax (608)
G1 MB SERIES MINIATURE TANK BREATHERS 10 Micron Filtration (Nominal) Shatter Resistant Plastic Construction Temperatures Up to +225 F Model A B Number Thread Size Overall Height MB-02-10 1/4 NPT 1.8 MB-03-10
CX551 Wood Chipper. Illustrated Parts Breakdown
CX Wood Chipper Illustrated Parts Breakdown Page Base Assembly Page Feed Roller Carriage Page Hopper Assembly Page Rotor Housing S/N - Page Rotor Housing S/N + Page PTO Shaft Assembly S/N 0+ Page Self
DESCRIPTION. 10" Square Valve 10" Valve for United Plastics Tank Valve Handle-Complete Assembly Auxilliary Handle Lock less Hardware (see page 12)
QUIC-FLOW MANUAL DUMP VALVE ZICO 070PM REV 3-5- QUIC-FLOW valves are the fastest dumping systems for tankers, bar none, dumping up to 800 GPM. Mounting the valve at the bottom of the tank provides approximately
WYDB52CT810V34 WYDB52CT810V34CA PARTS MANUAL
WYDB52FR691V32 WYDB52FR691V32CA PARTS MANUAL WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWN.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255
Waterous S100 Single Stage Pump
The S100 Series end suction fire pump provides versatility in a smaller package. With a capacity of 2000 GPM (7570 L/min), the S100 Features a dynamic yet compact design, incorporating a ductile iron body
TUFF VAC 5000 PTO & GAS
TUFF VAC 5000 PTO & GAS 1 16-50-0000 BODY MOD:PTO "STICKER INCLUDED" 1 N/I 16-50-1000 BODY (MOD.GAS) 1 2 16-50-0005 DEFLECTOR LARGE 1 3 16-50-0010 DEFLECTOR SMALL 1 4 16-03-4800 EXHAUST SCREEN 1 5 16-55-0060
PARTS MANUAL EE60FX730V34CA EE52FX691V34CA
PARTS MANUAL EE48FR691V32 EE48FR691V32CA EE60FX730V34 EE60FX730V34CA EE52FR691V32 EE52FR691V32CA EE52FX691V34 EE52FX691V34CA 2 WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255
COMPACT WHEEL LOADERS PIN and after 6018BH - PIN and after 6020L, 6020BH Parts Catalog
R Ingersoll HOME COMPACT WHEEL LOADERS 6018 - PIN 14190349 and after 6018BH - PIN 14190351 and after 6020L, 6020BH Parts Catalog 8-3360 TRACTORS ATTACHMENTS INDEX PAINT ENGINES GENERAL INFO MAIN INDEX
Lime Spreader. Model SL10. Illustrated Parts Breakdown. Hydraulic System Hydraulic Manifold. Twin Speed Reducer
Lime Spreader Model SL0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Hydraulic System Hydraulic Manifold Switch Box Floor & Apron Axle Assembly Apron Drive
8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST
8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST 24 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY. DESCRIPTION PART # 1 24 FLAT WASHER, 1/2 ID SAE 6-0248 2 16 LOCKWASHER, 1/2 ID 6-0059 3 17 HEX NUT, 1/2-13UNC 6-0035
LIFT TRUCK SPECIFICATIONS
LIFT TRUCK SPECIFICATIONS RT50 2-Wheel Drive 4-Wheel Drive RT60 2-Wheel Drive 4-Wheel Drive RT80 2-Wheel Drive 4-Wheel Drive TABLE OF CONTENTS RT50 / RT60 / RT80 2-WD / 4WD Specifications / Dimensions.
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
PARTS LIST FOR MWT MHD WATER TRAILER
PARTS LIST FOR MWT-0510-2MHD WATER TRAILER 1 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Water Trailer was constructed and designed with quality and performance
Page 1 - Gearbox & Bearing Housing. Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2)
Spare Parts List Hy~Line Contents Page 1 - Gearbox & Bearing Housing Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2) Page 4 - Ports Page 5 - Single Mechanical
RL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to
RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN
FLUID COOLING Shell & Tube EK Series
FLUID COOLING Shell & Tube Series COPPER & STEEL CONSTRUCTION Features Compact Size High Efficiency Finned Bundle Design Low Cost Optional Patented Built-in Surge-Cushion Relief Bypass 3/16 Tube Size Heat
MODEL D ELECTRIC TWO-STAGE HYDRAULIC PUMP
l e s i MADE IN U.S.A. FOR HYDRAULIC w i t h ANS I B4 0. 1 Parts List for: SPX Hydraulic Technologies 5885 11th Street Rockford, IL 61109-3699 USA powerteam.com Tech Services: +1 800 477 8326 Fax: +1 800
A40 ARTICULATING CRANE MOUNTING AND INSTALLATION INSTRUCTIONS Manual No Rev. 9/2/2003
A40 ARTICULATING CRANE MOUNTING AND INSTALLATION INSTRUCTIONS Manual No. 407900001 Rev. 9/2/2003 Mailing Address: P.O. Box 580697 Tulsa, OK 74158-0697 Physical Address: Phone (918) 836-0463 4707 N. Mingo
HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm
HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description
COMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES GENERAL INFO. casecoltingersoll.
R Ingersoll COMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog 8-3370 HOME TRACTORS ATTACHMENTS PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (PIN) AND SERIAL NUMBERS (S/N) TRACTOR MODEL AND
LIFEMIST NT WATER DISTILLER
LIFEMIST NT WATER DISTILLER REPLACEMENT PARTS MANUAL AND WIRING SCHEMATIC FOR MODEL: NT, LM-AED-1 & LM-APK-1 PART # 500033 500035 500034 SERIES 0014 0002 0001 02/08/11 PAGE 1 097079-S14A 02/08/11 PAGE
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544
Form No Parts List for: MODEL B HYDRAULIC PUMP GENERAL SECTION PG PG553-2UK FT600 PG554. PG120A Series Y70G Series. Sheet No.
MODEL B HYDRAULIC PUMP GENERAL SECTION Parts List for: Form No. 100520 60208 PG553 65820 PG553-2UK FT600 PG554 FT700-001 PG554-LEAD FT700-002 PG554-2UK PG55A Series Y26G Series PG90A Series Y60G Series
SA Swingaway Auger. Parts List. 431 Gosport Street Moree Phone Fax
SA Swingaway Auger Parts List 431 Gosport Street Moree Phone 02 67521511 Fax 02 67524685 email - andrew@grainland.com.au www.grainland.com.au SWING AWAY AUGER 1061/1071 TUBE COMPONENTS... F2 1081/1371/1381
LPM LP-Gas Flowmeter Product Bulletin L LISTED. Primary Features. Specifications 91U3
LP-Gas Flowmeter Product Bulletin U L LISTED 9U Designed for bobtail tank trucks and bulk plants, the LPM-00 offers the widest flow range, (0-00 gpm) available in a meter of this type. The LPM-00 utilizes
Liftgate Terminology
SL-20 Series SL-20 Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
M-B Companies, Inc. Specification. Model 155. High Pressure Palletized Striper. High Pressure Airless. Options REV. 2.
M-B Companies, Inc. Administration Pavement Marking Equipment Divisions 1615 Wisconsin Avenue EAST COAST DIVISION WEST COAST DIVISION P.O. Box 200 79 Montgomery Street 2490 Ewald S.E. New Holstein, WI
Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L
INDEX Section L TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS TRANSPORT AUGER TUBE / UNDERCARRIAGE/ TF WHEEL MOVE L Description Page TF3, TF3, TF03, TF03 Basic Auger...L-3 TF, TF0 Basic Auger...L-