H-3 & HD-3 CRAWLER TRACTORS

Transcription

1 S CATALOG ALLIS-CHALMERS H-3 & HD-3 CRAWLER TRACTORS LITHO U.S.A. Carol Stream, Illinois 6087 Printed in U.S.A.

2 Page GENERAL DESCRIPTION. AIR CLEANER 7. INSTRUMENT PANEL 2. EXHAUST MANIFOLD 8. OPERATORS SEAT 3. FUEL TANK 9. PLATFORM 4. SHUTTLE CLUTCH CONTROL 0. TRACK 5. HOOD, SHELL. TRUCK WHEEL 6. GRILLE

3 H3 & HD3 Page A TP-6 FOREWORD The parts in this catalog are listed in alphabetical order and are located at the front of this catalog. Except for some common hardware all parts are identified with an item number. Common hardware not identified such as bolts, nuts, cotter pins and lubrication fittings, are listed in the text under the part which they attach or fit into. Note particularly that the quantity of hardware listed is always the quantity required for one part. Common attaching hardware listed under a part is not included in the assembly or included with the part unless specified. Example: (Incl. Bolt, Lockwasher and Nut). "Assembly or Packaged Parts" indicates if an individual part is one of many in a large assembly or one of several kinds in a package. All numbers are listed in the second last section of this catalog showing the quantity and description of the various parts that make up the assembly or package. The last section of this catalog contains a part number index to indicate on which page or pages a part number appears. All illustrations will be found to follow the text of each group or section of which it is a part. For any additional copies of this catalog there will he a supplementing service charge of three dollars. Refer any requests to your Branch House or office under which you operate. Order all parts for this machine from ALLIS-CHALMERS Dealer. HOW TO ORDER S your local 4. When ordering parts for this unit, supply the following information:. The tractor and engine serial numbers. 2. The model or name of the unit and its serial number. 3. State the common name of the part you wish to order, or a description of the part and its location on the unit, or bring in old part. IMPORTANT Always print your name and post office address, where parts are to be shipped; also specify whether material is to be shipped by freight, express or parcel post. 5. When ordering parts always determine right hand and left hand from a position in the operators seat facing the direction of forward travel. On Backhoe Units Right and Left is determined by facing the Backhoe from the operator seat. Unless claims for shortages or errors are made immediately upon receipt of goods, they will not be considered. When broken goods are received, a full description of the damage should be made by the carrier agent on the freight bill. If this description is insisted upon full damage can always be collected from the transportation company. No responsiblity is assumed for delay or damage to merchandise while in transit. Our responsibility ceases upon delivery of shipment to the transportation company, from whom a receipt is received showing that shipment was in good condition when delivered to them; therefore claims (if any) should be filed with the transportation company and not with Allis-Chalmers Manufacturing Company. The right is reserved to change the construction or material of any parts where it seems desirable to do so, without incurring the obligation of installing such changes on units already delivered.

4 INDEX TP-6 H3 & H D3 Page B AIR CLEANER: Diesel... 94, 96 Ammeter 22 Gas 40, 4 Cables 23 AIR CLEANER INDICATOR. 24 Gauges 22, 23 AIR HEATER, diesel... 88, 93 Key, ignition 23 ASSEMBLIES & PACKAGED S.. 220, 22, 222, Lamp , 224 Switches 23 ATTACHMENTS: Pulley, generator 00 Belt Pulley 207, 208 Starting Motor 00, 07 Drawbar 85 Voltage Regulator 00 Extension 85 Gasoline: Drive Shaft, rear winch 47A Battery 43 Ether Starting System, diesel 205 Battery Tray 6 Flexible Drive Shaft 26, 27 Cables 43 Grille Screen, radiator 23 Cables, battery 6 Hose and Couplings, bulk 29 Electrical System 43 Hour Meter Fuses 44 Low Clearance Muffler, gas 204 Generator 44, 02 Operation Meter 26, 27 Harnesses 43, 45 Pull Hook 206 Instrument Panel 22 Tool Box, gas 206 Ammeter 22 Tool Box, diesel and gas 206 Cables 23 Universal Carrier Bracket 29 Gauges 22, 23 Water Heater, engine (Opt.) 25 Key, ignition 23 CLUTCH: Lamp 23 Engine: Switches.. 23 Disc, driven 29 Lamp Assy., head. 44 Gears: Pulley, generator.. 44 Drive 29, 30 Starting Motor.. 44, 02 Drive, intermediate 3 Voltage Regulator. 43 Driven 3 ENGINES: Plates: Diesel: Back 24 Bearings, main. 47, 48 Pressure 24 Belt, tan 90 Rings, snap. 30, 3 Blade Assy., tan. 9 Shaft 29 Block Assy., cylinder 46 Pedal 25 Camshaft 52 DRIVE SHAFT & RING GEAR 54 Caps, main bearings 47 Carrier: Choke Control. 2 Bearing 54 Connecting Rods 49 Ring Gear 54 Cover, fuel pump pad 48 Gear, ring 54 Cover Assy., cyl. head 56 Shaft, drive 54 Crankshaft... 5 Sleeve 55 Cylinder Head.. 54 ELECTRICAL: Engine Assy Diesel: Extension, muffler 97 Battery 00 Flywheel Assy 6 Battery Box 0 Fuel Filters 82 Cables 99, 00 Fuel Injection Nozzle and Lines 67 Electrical System 99 Holder Assy 67 Fan, generator 00 Nozzle Assy 67 Fuse 99 Fuel Tank Filter 92, 8 Generator 00, 02 Gear, camshaft 53 Harnesses 00 Gear, crankshaft 5 Instrument Panel 22 Gear, drive 69

5 H3 & HD3 Page 2 TP-6 Gear, driven 69 INDEX Manifold: Gear, ring. - 6 Exhaust 39 Gear Cover. 62 Intake 39 Impeller 90 Oil Filter and Lines 42 Injection Pump Control 2 Oil Pump. 37 Manifold: Oil Sump. 36 Exhaust. 64 Piston Assy 7 Intake 64 Pulley, crankshaft Oil Filter 86 Pulley, pump 34 Oil Pan 60 Push Rods 4 Oil Pump 58 Rings, piston 7, 8 Piston Assy.. 49 Rocker Arms 3 Primer Pump and Lines 84 Tappets 4 Pulley 90 Thermostat. 33 Pulley, tan drive 5 Valves: Pump, hand primer - 85 Exhaust 3 Pump, injection. 7, 77 Intake 3 Pump Assy., fuel injection 69 Water Manifold 33 Push Rods 53 Water Pump. 34 Rings, piston 49 ENGINE MOUNTS. 0 Rocker Arms 53 FENDERS 82 Sleeve, cylinder 47 FINAL DRIVE: Thermostat 66 Brakes: Valves: Arm 59 Exhaust. 56 Band 59 Intake.. 57 Lining 59 Water Inlet Pipes 65 Linkage, latch 6 Water Outlet Pipes 65 Fork 62 Water Pump.. 90 Lever 6,62 Gasoline: Shaft 62 Bearings, main 0 Clutch: Belt, tan 34 Disc, driven.. 57 Blades, tan Flywheel 57 Block Assy., cylinder 4 Hub 57 Cables, spark plugs. 29 Lever, hand. 56 Camshaft Plate: Caps, main bearings. 5 Back 57 Carburetor 2, 25, 38 Pressure 57 Choke Control.. 2 Steering 57 Connecting Rods.. 7, 8 Housing 65 Cover, fuel pump.. 5 Axle, rear 65 Cover, timing gear. 6 Gear, final 65 Crankshaft Kit.. 0 Pan.. 66 Cylinder Head. 5 Ring, seal 66 Distributor 3, 32A Shaft, pinion 65 Engine Assy 5 Sprocket.. 66 Extension, muffler 39 FUEL GAUGE. 8 Fan, water pump. 34 FUEL TANK 8 Flywheel Assy FUEL TANK SUPPORT 6 Fuel Filter 9, 8 GRILLE, radiator.. 2 Fuel Line.. 27 HOOD: Fuel Pump.. 27 Diesel and Gas. 4 Gear, camshaft. 4 HYDRAULICS: Gear, crankshaft. 0 By -Pass Valve Group Gear, ring.. 0 Control Valves: Governor 7 Spool 9 92 Ignition 28 3 Spool.. 9, 92 Impeller.. 34 Liner, cylinder. 7, 8

6 H3 & HD3 TP-6 Page 3 Diverter Valve A INDEX Idler Assy. 69, 70 Dual Pump, 403 Winch 88A, 89, 90 Block, tapping Extra Spool Valve and Line.. 98 Plate, wear 69, 7 Hydraulic System f/torque Housing Shaft 69, 70 Reservoir and Fender Mounted Valve 96, 97 Mainframe 77 Hydraulic System w/fender Mounted Release, track 72 Reservoir , 94, 95 Housing 72 Lines, Loader and Backhoe 99, 200 Lock, adjusting 73 Pump , 87 Roller 73 Pump Drive and Mounting 90A Seat, spring 72, 73 Relief Valve, circuit w/066 L 20, 202 Yoke Assy. 73 Single Pump 88 Track 80, 8 MUFFLER: Guage, track wear 8 Diesel Rail Assy 8 Gas 39 Shie, grouser 8 NUMERICAL INDEX. 226 Truck Wheel.. 74, 76 PAN ADAPTOR, bottom 20A Block, tapping. 75, 76 PAN GUARD, bottom 209, 20 Bracket 74, 76 PLATFORM 82, 83 Shaft 74, 76 RADIATOR.. 2 TRANSMISSION: RADIATOR SHELL. 2 Cap, dipstick. 48 ROCK GUARD 209, 20 Cover, rear 48 SEAT GROUP. 84 Gear Shift SEAT SUPPORT. 82, 83 Cover, control.. 52 SHUTTLE CLUTCH 32 Forks 52, 53 Controls 34 Levers 53 Collar 35 Rods, shifter 52, 53 Fork 35 Housing 48 Lever 34 Plug, drain 48 Quadrant 35 Power Take-Off 4 Shaft 35 Gears: Shifter 35 Idler 43, 46 Oil Cooler 37, 38, 39, PTO 4, Housing 45 Cover 37, 39 Ring, snap 42, 43, 46 Tubing 38, 40 Shafts 4, 43, 45, Oil Pump 36 46, 47 Gears: Shifter. 44 Drive 36 Arm 44 Driven 36 Lever 44 Plates: Shafts and Gears 49, 50, 5 Clutch 33 Clutch, center 33 Pressure 32 Ring, snap 32, 33 SIDE SHEETS 20 THROTTLE CONTROL, fuel. 7 TORQUE HOUSING 26 Breather 26 Cap, oil filler 26 Cover, PTO gear 27 Cover, pulley 27 Gauge, oil level 26 Housing, pump 27 Tube, oiler 28 TRACK GROUP: Axle Frame... 77, 78

7 ITEM NUMBER QTY. DESCRIPTION CYLINDER BLOCK Gasoline SEAL, crankshaft, rear RETAINER, crankshaft rear seal CAPSCREW LOCKWASHER GASKET, crankshaft rear seal retainer BUSHING, camshaft, front & rear (See Camshaft Group) COCK, drain 6 TRANSFER, instruction, water drain BLOCK ASSY., cyl. (Incl. items 4, 0,, 4, 5) (Used prior to tractor S/N 6959) BLOCK ASSY., cyl. (Incl. items 4,0,,4,5 thru 9) (Eff. w/tractor S/N 6959 & up) ROD ASSY., oil level gauge (Incl. SEAL) Continued 4

8 CYLINDER BLOCK (Cont'd) Gasoline ITEM NUMBER QTY. DESCRIPTION BUSHING, oil level gauge rod 0 BUSHING, governor gear (See Governor Group) BUSHING, camshaft, center (See Camshaft Group) GASKET, oil pump opening cover COVER, oil pump opening 975 CAPSCREW CAPSCREW LOCKWASHER NUT CAP, main bearing, front & center CAP, main bearing, rear CAPSCREW, main bearing cap COVER, fuel pump CAPSCREW NOTE: These parts not required when GASKET, cover tractor is equipped w/ Fuel Pump WASHER, copper 20 TRANSFER, engine designation (Not Illustrated) ENGINE ASSY., replacement (60 cu. in. displacement) Does Not Include; flywheel, clutch shaft bearing, crankshaft pulley, engine supports, carburetor linkage, carburetor, clutch, air cleaner, starting motor, generator or fan. 5

9 8 2 PISTON & CONNECTING ROD 6

10 ITEM NUMBER QTY. PISTON & CONNECTING ROD Gasoline (49 Cu. In. Engine) Used Prior to Tractor S/N 6959 DESCRIPTION NUT, bearing cap bolt NUT, lock BEARING, conn. rod, std. (2 halves) (Replaces ) BEARING, conn. rod,. 00" U/S (2-halves) (Replaces ) BEARING, conn. rod,. 0025" U/S (2-halves) (Replaces 2326) BOLT, hearing cap (Supersedes 22567) PIN, piston PISTON ASSY., 7.5: ratio, gasoline (Incl. item 4) RING, channel oil, piston , ( RING, oil (Chrome) RING, compression, third (Chrome) RING, compression, top (Chrome) RING, compression ,230092, EXPANDER, third (Chrome) LINER, cylinder RING, packing, cylinder liner CAPSCREW, clamping, piston pin LOCKWASHER ROD ASSY., connecting (Incl. items & 3) (Supersedes ) 7

11 ITEM NUMBER QTY. DESCRIPTION PISTON & CONNECTING ROD Gasoline (60 cu. in. Engine) Eff. w/tr. S/N 6959 & up NUT, bearing cap bolt NUT, lock, pltd., 3/8" BOLT, bearing cap ROD ASSY., connecting (Incl. items,2 & 2) LOCK, piston pin PISTON ASSY., 8: ratio, gasoline (Incl. item 9) RING, channel oil, piston RING, compression, second & third RING, compression, top PIN, piston LINER, cylinder RING, packing, cylinder liner BUSHING, piston pin { BEARING, conn. rod, std. (2 halves) BEARING, conn. rod,.00" U/S (2 halves) BEARING, conn. rod,.0025" U/S (2 halves) RING, top compression RING, 2nd compression RING, 3rd compression EXPANDER, 3rd compression RING, oil control

12 MEMO 9

13 ITEM NUMBER QTY. CRANKSHAFT & FLYWHEEL Gasoline DESCRIPTION CAPSCREW, flysheel LOCKWASHER GEAR, ring, 6T FLYWHEEL ASSY., (Incl. items 2 & 4)(Eff. w/tractor S/N 6959 & up) FLYWHEEL ASSY., (Incl. items 2 & 4)(Used prior to Tractor S/N 6959) BUSHING, clutch shaft SEAL, crankshaft, rear , CRANKSHAFT KIT, std. (Used prior to Tractor S/N 6959) CRANKSHAFT KIT, std. (Eff. w/tractor S/N & up) BEARING, main, rear, std. (2 halves) BEARING, main, rear,.00' U/S (2 halves) BEARING, main, rear,.0025" U/S (2 halves) BEARING, main, front & center std. (2 halves) BEARING, main, front & center.00" (2 halves) BEARING, main, front & center.0025" (2 halves) GEAR, crankshaft KEY, woodruff Continued 0

14 CRANKSHAFT & FLYWHEEL (Cont'd) Gasoline ITEM NUMBER QTY, DESCRIPTION SEAL, crankshaft, front 'POO 0*OG , PULLEY, crankshaft KEY, woodruff SETSCREW ADAPTER, crank (f/front mounted pump) CAPSCREW, crank adapter LOCKWASHER 9042 NUT

15 -d VALVES & ROCKER ARMS 2

16 VALVES & ROCKER ARMS Gasoline ITEM NUMBER QTY. DESCRIPTION VALVE, exhaust VALVE, intake (Supersedes 23672) GUIDE, intake & exhaust valve (Supersedes ) SEAT, valve spring SPRING, valve LOCK, spring retainer (half) STUD, rocker arm support 9023 NUT SUPPORT, rocker arm shaft (Supersedes ) STOPPER, rocker arm shaft, cork SHAFT ASSY., rocker arm (Incl. Item 9 & d-pins) PIN, cotter TUBE, oil, rocker arm shaft NUT WASHER, rocker arm shaft WASHER, support stud COVER, rocker arm PACKING, cover stud , CAP, breather GASKET, rocker arm cover (Replaces ) , ARM ASSY., rocker, L.H. (Incl. Item 9 & NUT) (Supersedes ) ARM ASSY., rocker, R.H. (Incl. Item 9 &.NUT)(Supersedes 22852) SCREW, rocker arm adjusting NUT SPRING, rocker arm spacing RETAINER, valve spring, intake ROTO-CAP, exhaust valve SLEEVE, rocker arm oil tube 3

17 CAMSHAFT Gasoline ITEM NUMBER QTY. DESCRIPTION { BUSHING, camshaft, front & rear, std BUSHING, camshaft, center, std CAMSHAFT, engine PIN, plain ROD, push TAPPET, valve SPRING, oil relief valve BALL, steel PLATE, thrust GEAR, camshaft 9084 KEY, woodruff 8 {, PLUNGER, thrust (Used prior to Tr. S/N 6959) PLUNGER, thrust (Eff. w/tr. S/N 6959 & up) SPRING, thrust 4

18 ITEM NUMBER 2459 QTY. DESCRIPTION CYLINDER HEAD Gasoline HEAD ASSY., cyl. (Incl. items 3 & 5)(Eff. w/tr. S/N 6959 & up) HEAD ASSY., cyl. (Incl. items 3 & 5)(Used prior to TrS/N 6959) CAPSCREW, cyl. head, long (Use prior to Tr. S/N 6959) CAPSCREW, (Eff. w/tr. S/N 6959 & up) CAPSCREW, cyl. head, long (Eff. w/tr. S/N 6959 & up) PLUG, core hole WASHER, cyl. -head capscrew GUIDE, valve (Supersedes ) CAPSCREW, cyl. head, short (Prior to Tr. S/N 6959) CAPSCREW, cyl. head, short (Eff. w/tr. S/N 6959) GASKET, cyl, head (Prior to Tr. S/N 6959) , GASKET, cyl. head (Eff. w/ Tr. S/N 6959) , PLUG ASSY., cleanout (Not required on later models) 5

19 TIMING GEAR COVER Gasoline ITEM NUMBER QTY. DESCRIPTION GASKET, timing gear cover GASKET, thrust cover COVER, thrust, camshaft STUD, thrust plate cover LOCKWASHER NUT COVER ASSY., timing gear CAPSCREW (lower) LOCKWASHER (lower) CAPSCREW (center) LOCKWASHER (center) POINTER, timing SCREW, machine LOCKWASHER 6

20 ITEM NUMBER QTY DESCRIPTION GOVERNOR Gasoline BUSHING, governor gear GEAR, drive, distributor, 6T PIN SHAFT ASSY., governor (Incl. GEAR) LINK, carburetor 94 WASHER, plain (front) PIN, cotter TEE, oil tube (Incl. 2 SLEEVES & NUTS) SLEEVE NUT LEVER ASSY., control rod (Supersedes 2238) SPRING, governor, (650 RPM) (Incl. PLUNGER) (Used prior to Tr. S/N H3-8694) SPRING, governor, (800 RPM) (Eff. w/tr. S/N H3-8694) PIN, pivot, control rod lever HOUSING ASSY., governor (Incl. SPRING LEVER, CROSS SHAFT COLLAR, CROSS SHAFT BUSHING, CROSS SHAFT, FORK & Item 3) CAPSCREW LOCKWASHER Continued 7

21 GOVERNOR (Cont'd) Gasoline ITEM NUMBER QTY. DESCRIPTION STUD, housing LOCKWASHER NUT GASKET, housing BUSHING, governor shaft, front PIN, dowel, housing BEARING, ball, thrust WEIGHT ASSY., governor (Incl. RISER PIN) PIN, pivot, weight CLIP, weight pivot pin BRACKET, governor, adjustment LOCKWASHER NUT CAPSCREW NUT BRACKET, bumper spring WASHER, pivot pin SCREW, bumper spring NUT, jam SPRING, bumper 8

22 3 FUEL FILTER Gasoline ITEM NUMBER QTY. DESCRIPTION FILTER ASSY., fuel (Incl. all Items in this group) (Eff. w/tr. S/N 2450 & up) FILTER ASSY., fuel (Incl. all items in this group) (Prior to TrL S/N 2450) BAIL ASSY., fuel bowl (Incl. STUD, NUT & CUP) r BOWL (Glass) BOWL (Metal) r ELEMENT, filter (Used Prior to Tr. S/N 2450) ELEMENT, filter (Eff. w/tr. S/N 2450 & up) GASKET, bowl 5 HEAD, filter (Not serviced; use Filter Assy.) VALVE ASSY., filter 9

23 22 IMPORTANT GIVE OUTLINE No. STAMPED ON DISC ON THROTTLE BODY WHEN ORDERING CARBURETOR S CARBURETOR (Used Prior to Tr. S/N

24 ITEM CARBURETOR Marvel-Schebler Used Prior to Tr. S/N 6959 NUMBER QTY. DESCRIPTION CARBURETOR ASSY. (Gasoline & Low Octane Fuel) (Model TSX-85) NUT, choke shaft LOCKWASHER PLUG, drain, fuel bowl 9554 COCK, drain, fuel bowl PLATE ASSY., choke (Incl. FLAPPER & SPRING) SCREW, choke & throttle plate (Incl. LOCKWASHER) GASKET, power jet , NOZZLE, power jet VENTURI FLOAT ASSY SCREW, stop, throttle lever SPRING, throttle stop screw L JET, idling BODY ASSY., throttle (Incl. Items 4,9,0,3, 6,8,9,37 & 38) SHAFT ASSY., throttle (Incl. Items 9,0 & LEVER) RETAINER, throttle shaft seal SEAL, throttle shaft PLUG, throttle body SCREW, fuel bowl to throttle body (Incl. LOCKWASHER) PLATE, throttle CUP, throttle shaft hole SPRING, idle adjusting needle NEEDLE, idle adjusting NEEDLE ASSY., high speed (Replaces ) SPRING, high speed needle WASHER, high speed needle GASKET, high speed needle , Continued 2

25 ITEM CARBURETOR (Cont'd. ) Marvel-Schebler Used Prior to Tr. S/N 6959 NUMBER QTY. DESCRIPTION GASKET, float valve seat , VALVE ASSY., float (Incl. SEAT & Item 26) SHAFT, float lever SCREW, choke friction lever SPRING, choke friction lever WASHER, friction lever screw SHAFT ASSY., choke (Incl. FRICTION LEVER) GASKET, throttle body to bowl , BOWL ASSY., fuel (Incl. Items 4,5,35 & 36) PLUG, power jet opening STRAINER, drain, air intake PACKING, choke shaft RETAINER, choke shaft packing LEVER, choke (Incl. Items 24, 25, 26) JET, economizer JET, power

26 MEMO 23

27 IMPORTANT GIVE OUTLINE No. STAMPED ON DISC ON THROTTLE BODY WHEN ORDERING CARBURETOR S CARBURETOR (Eff. w/ Tr. S/N 6959 & up) 24

28 CARBURETOR Marvel-Schebler Eff. w/tr. S/N 6959 & Up ITEM NUMBER QTY. DESCRIPTION CARBURETOR ASSY., (Gasoline) (Replaces 2402) NUT, choke shaft LOCKWASHER PLUG, drain, fuel bowl PLATE ASSY., choke (Incl. FLAPPER & SPRING) SCREW, choke & throttle plate (Incl. LOCKWASHER) GASKET, power jet.., NOZZLE, power jet VENTURI FLOAT ASSY SCREW, stop, throttle lever SPRING, throttle stop screw JET, idling BODY ASSY., throttle SHAFT ASSY., throttle (Incl. Items 9, 0 & LEVER) RETAINER, throttle shaft seal PACKING, throttle shaft PLUG, throttle body SCREW, fuel bowl to throttle body (Incl. LOCKWASHER) PLATE, throttle CUP, throttle shaft hole SPRING, idle adjusting needle NEEDLE, idle adjusting NEEDLE ASSY., high speed (Replaces ) SPRING, high speed needle WASHER, high speed needle GASKET, high speed needle GASKET, float valve seat VALVE ASSY., float (Incl. SEAT & Item 26) Continued 25

29 CARBURETOR (Cont'd) Marvel- Schebler Eff. w/tr. S/N 6959 & Up ITEM NUMBER QTY. DESCRIPTION SHAFT, float lever SCREW, choke friction lever SPRING, choke friction lever WASHER, friction lever screw SHAFT ASSY., choke (Incl. FRICTION LEVER) GASKET, throttle body to bowl BOWL ASSY., fuel (Incl. Items 4,5 & 35) PLUG, power jet opening PACKING, choke shaft RETAINER, choke shaft packing LEVER, choke (Incl. Items 24, 25, 26) JET, economizer JET, power GASKET SET, carburetor KIT, carburetor repair Not Illustrated NEEDLE ASSY., main adj. 26

30 FUEL PUMP Gasoline ITEM NUMBER QTY. DESCRIPTION GASKET, fuel pump LINE, fuel - pump to carburetor ELBOW, male 9748 ELBOW, male PUMP ASSY., fuel * (Supersedes ) CAPSCREW NOTE: Order parts and service from United Motors Service Agency WASHER, copper, pump capscrew 27

31 6 IGNITION Gasoline ITEM NUMBER QTY. DESCRIPTION CLAMP ASSY., coil (Incl. SCREW which is not serviced separately) CAPSCREW LOCKWASHER WASHER, plain PLUG, distributor drive housing COIL ASSY., ignition (Incl. Item ) TERMINAL, cable (Coil & Distributor End) CABLE, primary, distributor to coil NIPPLE, cable (f/coil) 7 CABLE, secondary, coil to distributor [ PLUG, spark (Auto-Lite) PLUG, spark (A-C) PLUG, spark (Champion) Continued 28

32 IGNITION (Cont'd.) Gasoline ITEM NUMBER QTY. DESCRIPTION TERMINAL, spark plug cable (plug end) RETAINER, cable 2 CABLE, spark plug, No. & 2 cylinder CABLE, spark plug, No. 3 cylinder CABLE, spark plug, No. 4 cylinder NIPPLE, cable (f/distributor) 3 DISTRIBUTOR ASSY. (See Distributor Group) CAPSCREW, distributor clamp (Incl. LOCKWASHER) CLAMP, distributor to drive housing TEE, oil tube (Incl. SLEEVE & NUTS) SLEEVE NUT TUBE, oil 9025 CONNECTOR (Incl. SLEEVE & NUT) SLEEVE NUT GASKET, distributor base to drive housing BUSHING, governor shaft, rear GASKET, drive housing to cylinder block STUD, drive housing LOCKWASHER NUT HOUSING ASSY., distributor drive (Incl. Item 9) CLIP, drive housing CAPSCREW CABLE SET, spark plug 29

33 DIST RIB U T OR 30

34 DISTRIBUTOR ITEM NUMBER QTY. DESCRIPTION DISTRIBUTOR ASSY (Incl. items thru 33) (Replaces ) GEAR, driven, 2T * SHIM, driven gear,.005" thk. (* Use as required) WASHER, driven shaft BUSHING, driven shaft CLIP, spring, cap SUPPORT, cap clip (long) SCREW LOCKWASHER INSULATOR, primary terminal stud (inside) NUT, primary terminal (inside) (Replaces ) LOCKWASHER SPRING, ed.vance weight CAM ASSY., circuit breaker (Incl. SHAFT, ADVANCE CAM & TWO SPRING POSTS) WEIGHT, advance PLATE, retaining, advance weight NUT LOCK, advance weight plate nut (Replaces ) POINT SET, circuit breaker (Consists of LEVER ASSY & ADJUSTING SUPPORT ASSY) CONDENSER KIT (Incl. CLAMP & ATTACHING SCREW) SCREW, mach LOCKWASHER COVER ASSY., circuit breaker (Incl. items 9 & 20) l ROTOR ASSY., distributor CAP ASSY., distributor (Incl. CENTER CONTACT BUTTON AND FIVE TERMINAL SOCKETS) (Replaces ) SEAL KIT, cam shaft (Consists of FELT SEAL & RETAINER) GASKET, circuit breaker cover SCREW, locking, breaker point (Replaces ) PLATE ASSY., circuit breaker (Incl. POINT PIVOT PIN & ADJUSTING ECCENTRIC) SCREW, mach. (long) 9273 SCREW, mach. (short) LOCKWASHER WICK, oil, cam shaft Continued 3

35 DISTRIBUTOR (Cont'd) ITEM NUMBER QTY. DESCRIPTION SHAFT ASSY., distributor (Incl. WEIGHT PLATE, 2 SPRING POSTS & 2 WEIGHT PIVOT STUDS) SUPPORT, cap clip (short) SCREW LOCKWASHER RETAINER, breaker plate screw gasket GASKET, breaker plate screw GASKET, cap clip support HOUSING ASSY (Incl. PLUG & NAME PLATE) PLUG, pipe INSULATOR, primary terminal stud (outside) STUD, primary terminal NUT (outside) LOCK, primary terminal outside nut PIN, driven gear KIT, ignition (Incl. items 4 & 5) 32

36 2 DISTRIBUTOR 32A

37 DISTRIBUTOR (GASOLINE) ITEM NUMBER QTY DESCRIPTION DISTRIBUTOR ASSY., (Delco-Remy No. X24939) * GEAR, drive * SHIM, washer shaft (.005) * SHIM, washer shaft (.00) * Use As Required HOUSING, distributor SEAL, housing WASHER, spacer MAINSHAFT & WEIGHT PLATE WEIGHT, cam advance CAM, advance & breaker WICK, cam PLATE, weight hold down SPRING, weight Screw W/ LW CAP, distributor (Incls. Item 3 & 20) SCREW, distributor cap SCREW, distributor cap ROTOR, distributor COVER, housing SCREW, contact adjusting CONTACT SET CONDENSER Bracket Screw PLATE, breaker Screw, No. 8 U NC x 3/ GROMMET, housing, lead wire LEAD, primary WASHER, space PIN, gear attaching

38 ITEM NUMBER QTY. DESCRIPTION WATER MANIFOLD & THERMOSTAT Gasoline HOSE, by-pas s CLAMP, hose COVER, thermostat CAPSCREW LOCKWASHER GASKET, thermostat , THERMOSTAT ASSY., water, 60 (Incl. Item 3) GASKET, thermostat cover ,

39 WATER PUMP & FAN Gasoline ITEM NUMBER QTY. DESCRIPTION PUMP ASSY., water (Incl. all Items in this group except,0, & 7) GASKET, pump to cylinder block COVER, body SCREW, mach GASKET, cover to body IMPELLER GUIDE, shaft seal spring SEAL, shaft (rubber) RING, snap, impeller BEARING ASSY., (Incl. SHAFT) BELT, fan t BLADE, ASSY., fan, (6 blades, pusher)(supersedes ) CAPSCRE W LOCKWASHER 0 / \ SPACER, not shown L BLADE ASSY., fan (4 blades - Standard) CAPSCREW LOCKWASHER PULLEY, pump RING, snap, body (f/shaft Bearing) BODY, water pump (Incl. PIPE PLUG) PLUG, pipe 9036,34 CAPSCREW, CAPSCREW, LOCKWASHER WASHER, plain Continued 34

40 WATER PUMP & FAN (Cont'd. ) Gasoline ITEM NUMBER QTY. DESCRIPTION WASHER, shaft seal (carbon) RING, clamp, shaft seal SPRING, shaft seal PIPE, pump inlet STUD (Not Illustrated) NUT LOCKWASHER 35

41 OIL SUMP Gasoline ITEM NUMBER QTY. DESCRIPTION SUMP, oil CAPSCREW (rear) CAPSCREW (side) LOCKWASHER GASKET, oil sump STUD, oil sump LOCKWASHER NUT GASKET, drain plug PLUG, drain 36

42 OIL PUMP Gasoline ITEM NUMBER QTY. DESCRIPTION PUMP ASSY., oil (Incls. items thru 5 & 9)(Eff. w/tr. S/N 6959) PUMP ASSY., oil (Incl. items fhru 5 & 9)(Used prior to Tr. S/N 6959) COVER, oil pump (Used prior to Tr. S/N 6959) SCREW, mach (short) LOCKWASHER CAPSCREW LOCKWASHER COVER, pump (Eff. w/tr. S/N 6959) SCREW CAPSCREW GASKET, oil pump cover BLADE, rotor ROTOR, oil pump BODY ASSY., oil pump (Incl. EXPANSION PLUG) PLUG, expansion GASKET, pump to block SCREEN, floating intake PIPE, intake SPRING, rotor blade BALL SPRING, pressure regulator PIN, spring, retaining 37

43 ITEM NUMBER QTY. DESCRIPTION INTAKE & EXHAUST MANIFOLD Gasoline PACKAGE NO, CARBURETOR (For parts see Carburetor Group) GASKET, carburetor flange , CAPSCREW, carburetor attaching LOCKWASHER STUD, manifold (short) NUT, manifold stud WASHER, manifold stud STUD, manifold (long) Continued 38

44 INTAKE & EXHAUST MANIFOLD (Cont'd) Gasoline ITEM NUMBER QTY. DESCRIPTION 2344 MANIFOLD ASSY., intake & exhaust (Incl. PIPE PLUG) (Used prior to Tr. S/N 7637) MANIFOLD ASSY., intake & exhaust (Incl. PIPE PLUG) (Eff. w/tr. S/N 7637 & up) 9065 PLUG, pipe GASKET, manifold , PIPE, exhaust, manifold to muffler CLAMP ASSY., muffler (Replaces ) MUFFLER, exhaust CAP, weather CAPSCREW, muffler MUFFLER, exhaust (Supersedes 23427)(Used prior to Tr. S/N 7637) CLAMP, muffler TUBE, muffler extension NOTE: Tractors prior to S/N 6020 used muffler of one piece design when replacing muffler of this type order each of Item 5, 6 &

45 ITEM NUMBER QTY. AIR CLEANER (Gasoline) Oil Bath Type Used Prior to Tr. S/N 8694 DESCRIPTION CUP, oil, outer CUP, oil, inner CLAMP ASSY., oil cup (Incl. SCREW) CLEANER ASSY., air (Incl. Items, 2 & 3) (f/low clearance Muffler Group) CLEANER ASSY., air (Incl. Items, 2 & 3) CAPSCREW LOCKWASHER (Replaces ) CAP, rain (optional) HOSE, carburetor CLAMP TRANSFER, air cleaner instruction

46 ITEM NUMBER QTY. AIR CLEANER - DRY TYPE Eff. w/tr. S/N 8694 & Up Not Illustrated DESCRIPTION PACKAGE NO, CLEANER ASSY., air (Incl. MOUNTING BANDS & items thru 7) ELEMENT ASSY., air cleaner (Incl. item 2) L GASKET, element NUT ASSY CLAMP ASSY., cup CUP ASSY., air cleaner BAFFLE CAP, air cleaner BRACKET, air cleaner CAPSCREW LOCKWASHER CAPSCREW LOCKWASHER NUT HOSE, air cleaner to carburetor CLAMP, hose TUBE ASSY., air cleaner inlet CAP, air cleaner (Replaces ) BAND, mounting (Not illustrated) 4

47 OIL FILTER & LINES Gasoline ITEM NUMBER QTY. DESCRIPTION FILTER ASSY., oil (cartridge) (Supersedes and ) BASE, filter CAPSCREW LOCK WASHER 9023 PLUG, pipe BALL TUBE, filter base to block CONNECTOR (Incl. NUT & SLEEVE) 9787 ELBOW (Incl. NUT & SLEEVE) TUBE, oil pump to filter base ELBOW (female) 9787 ELBOW (male) NIPPLE WASHER, plain, copper 7 TRANSFER TUBE, oil, head to block (Incl. NUTS & SLEEVES) ELBOW, male TEE, special TUBE, oil block to governor 9025 CONNECTOR (male) 42

48 ELECTRICAL SYSTEM Gasoline ITEM NUMBER QTY. DESCRIPTION TERMINAL ASSY., connector male 4-way SCREW, s-tap CLIP, wiring harness CLAMP, wiring harness CAPSCREW LOCKWASHER CABLE, battery to ground CAPSCREW LOCKWASHER BATTERY, 2 volt CABLE, battery to starter solenoid HARNESS, wiring front CLIP, wiring harness REGULATOR, voltage (Delco No. 8993) SCREW NUT, speed WASHER LOCKWASHER CAPSCREW LOCKWASHER NUT CONNECTOR, line Continued 43

49 ELECTRICAL SYSTEM (Contid. ) Gasoline ITEM NUMBER QTY. DESCRIPTION FUSE, 20 amp HOLDER ASSY., fuse (Incl. CAP) LOCKWASHER CAP, fuse holder CONNECTOR "Y" CLIP, rear lamp and harness GROMMET, rubber CLAMP, wiring harness to fuel tank support PLATE, voltage regulator 988 NUT, speed 7 MOTOR ASSY., electric starting (See Starting Motor Group for Components) SETSCREW, starting motor 905 NUT, jam CLAMP, wiring harness to generator bracket BRACKET, generator mounting CAPSCREW 2' LOCKWASHER 2 GENERATOR ASSY., (See Generator Group for Components) CAPSCREW LOCKWASHER NUT, hex PULLEY, generator BRACE, generator adjusting CAPSCREW LOCKWASHER 2 95 WASHER, plain SPACER, headlamp NUT, jam MOULDING ASSY SCREW, moulding UNIT ASSY., sealed (lamp) LAMP ASSY., head R.H GROMMET LAMP ASSY., head, L.H Grommet Continued 44

50 ELECTRICAL SYSTEM (Cont'd. ) Gasoline ITEM NUMBER QTY. DESCRIPTION HARNESS, wire jumper SLEEVE, harness 2-3/4" (Front) SLEEVE, harness 2-/2" (Rear) SLEEVE, lamp 7-/4" CONNECTOR, line For Rear Mounted Auxiliary Lamps CLAMP, harness to platform CLIP, wire 45

51 so a. es 3 es <5 07* s (.5, ITEM NUMB ER QTY. DESCRIPTION CYLINDER BLOCK Diesel BLOCK ASSY., cylinder (Incl. items 2 & 5 thru 3, 8, COCK & PLUGS indented below) PLUG, expansion 9004 PLUG, expansion PLUG, pipe PLUG, pipe 97,45 COCK, drain PLUG, pipe BEARING, camshaft, front RING, packing , RING, packing , Continued 46

52 CYLINDER BLOCK (Cont'd) Diesel ITEM NUMBER QTY. DES CRIPT ION PACKAGE NO, SLEEVE, cylinder SLEEVE, cylinder (.020" oversize flange) (Requires remachining of cylinder block BEARING, camshaft, rear BEARING, camshaft, intermediate PLUG, hole, oil level gauge (Opposite side of oil level gauge) CAP, main bearing, rear (See Note) CAP, main bearing, intermediate (See Note) CAP, main bearing, center (See Note) DOWEL, main bearing cap DOWEL, main bearing cap (.030" oversize) (Use with semi-finished caps) CAP, main bearing, front (See Note) CAPSCREW, main bearing cap 9053 LOCKWASHER BEARING, main, front (standard) (Replaces ) BEARING, main, front (.002") (Replaces ) BEARING, main, front (.00") (Replaces ) BEARING, main, front (.020") (Replaces ) BEARING, main, front (.040") (Replaces ) BEARING, main, intermediate (standard) (Replaces ) BEARING, main, intermediate (. 002") (Replaces ) BEARING, main, intermediate (. 00") (Replaces ) BEARING, main, intermediate (. 020") (Replaces ) BEARING, main, intermediate (. 040") (Replaces ) BEARING, main center (standard) (Replaces ) BEARING, main, center (.002") (Replaces ) BEARING, main, center (.00") (Replaces ) BEARING, main, center (.020") (Replaces ) e; BEARING, main, center (.040") (Replaces ) Continued 47

53 CYLINDER BLOCK (Cont'd) Diesel ITEM NUMBER QTY. DESCRIPTION BEARING, main, rear (standard) (Replaces ) BEARING, main, rear (.002") (Replaces ) BEARING, main, rear (.00") (Replaces ) BEARING, main, rear (.020") (Replaces ) BEARING, main, rear (.040") (Replaces ) INSERT, oil pressure regulating valve PISTON, oil pressure regulator SPRING, oil pressure regulator SCREW, oil pressure regulator NUT COVER, fuel pump pad CAPSCREW WASHER, plain GASKET, fuel pump pad cover NOTE: Replacement bearing caps are semi-finished and must be linebored after installing ENGINE ASSY., replacement 48

54 PISTON & CONNECTING ROD Diesel * Used Prior to S/N Eng. D **Eff. w/s/n Eng. D ITEM NUMBER QT Y. * ** DESCRIPTION BEARING, connecting rod (standard) (Replaces ) BEARING, connecting rod (.002'. (Replaces ) BEARING, connecting rod (.00") (Replaces ) BEARING, connecting rod (.020") (Replaces ) BEARING, connecting rod (.040") NUT, connecting rod bolt BOLT, connecting rod ROD ASSY., connecting (Ind. items 2, 3 & 2) PISTON, (Replaces ) , RING, piston (5th) , RING, piston (3 pieces) (4th) , RING, piston (2nd & 3rd) , RING, piston (top) , Continued 49

55 PISTON & CONNECTING ROD (Cont'd) Diesel * Used Prior to S/N Eng. D ** Eff. w/s/n Eng. D QTY. ITEM NUMBER * ** DESCRIPTION RETAINER, piston pin , PIN, piston , BUSHING, connecting rod 50

56 CRANKSHAFT Diesel ITEM NUMB ER QTY. DESCRIPTION CRANKSHAFT GEAR, crankshaft KEY PULLEY, fan drive KEY NUT, lock 5

57 ITEM NUMBER QTY. DESCRIPTION VALVE OPERATING MECHANISM Diesel CAMSHAFT PLATE, thrust CAPSCREW, thrust plate LOCKWASHER Continued 52

58 VALVE OPERATING MECHANISM (Cont'd) Diesel ITEM NUMBER QTY. DESCRIPTION GEAR, camshaft (Replaces ) KEY RETAINER, camshaft gear LIFTER, valve ROD, push BRACKET, rocker arm shaft NUT CAPSCREW WASHER CLIP, rocker arm bracket SHAFT ASSY., rocker arm (Incl. PLUGS) PLUG, expansion ARM ASSY., rocker (Incl. items 2 thru 7) (Used prior to Eng. S/N 5808) ARM ASSY., rocker (Incl. items 3 thru 6 & 9) (Use Eng. S/N 5808 thru 9738) SCREW, push rod adjusting (Used prior to Eng. S/N 5580) BUSHING, (Used prior to Eng. S/N 9738) 4 8 RETAINER, ball (Not serviced) 5 8 BALL (Not serviced) 6 8 WICK, oil (Not serviced) NUT, adjusting screw (Used prior to Eng. S/N 5580) ARM ASSY., rocker (Incl. items 4 thru 6 & 9) (Replaces ) SCREW, push rod adjusting (Eff. w/eng. S/N 5580) LINE ASSY., overflow (Incl. NUT) NUT ELBOW LINE ASSY., oil (Crankcase to Head) (Incl. NUTS) NUT ELBOW 53

59 CYLINDER HEAD & VALVES Diesel * Used Prior to Eng. S/N 9505 Used w/eng. SIN 9505 Thru D **I Eff. w/eng. S/N D & Up ITEM NUMBER QTY. ** * DESCRIPTION HEAD ASSY., cylinder (Incl. items 2,9, 33 & PLUGS) HEAD ASSY., cylinder (Incl. items 2,9, 33 & PLUGS) HEAD ASSY., cylinder (Incl. items 2,9, 33 & PLUGS) (Replaces ) STUD, PLUG, 9885 PLUG, PLUG, PLUG, PLUG, air cell (short) expansion pipe core hole (f/ ) core hole (f ) expansion (f ) CELL ASSY., air (Incl. ORIFICE & PIN) PLUG, air cell FLANGE, air cell retainer Continued 54

60 ITEM QTY. NUMBER * ** CYLINDER HEAD & VALVES (Cont'd) Diesel Used Prior to Eng. S/N 9505 ** Used w/eng. S/N 9505 Thru D Eff. w/eng. S/N D & Up *** DESCRIPTION NUT, air cell stud (short) LOCKWASHER NUT, air cell stud (long) WASHER STUD, air cell (long) { { WASHER, cylinder head capscrew CAPSCREW, cylinder head (5-3/8") (Replaces 45644) CAPSCREW, cylinder head (7-3/32") (Replaces 45646) STUD, manifold GUIDE, exhaust valve SPRING, exhaust valve (Used prior to Eng. S/N D-0334) SPRING ASSY., exhaust valve (Incl. item 36) (Eff. w/eng. S/N D-0334) RETAINER, valve spring, exhaust LOCK, valve spring retainer ROTO-CAP ASSY., valve spring, intake SPRING, intake valve (Used prior to Eng. S/N D-02582) SPRING ASSY., intake valve (Incl. item 36) (Eff. w/eng. S/N D-02582) DEFLECTOR, oil, intake valve stem (Rubber) SEAL KIT, oil, intake valve (Incl. 4 SEALS & VALVE STEM CAP) GUIDE, intake valve (Replaces ) GUIDE, intake valve CAPSCREW, lifting (6-9/6" overall length) (Replaces ) CAPSCREW, lifting (8-9/32" overall length) (Replaces 45647) GASKET, cylinder head cover nut , STUD, rockerarm bracket NUT WASHER Continued 55

61 CYLINDER HEAD & VALVES (Cont'd) Diesel * Used Prior to Eng. S/N 9505 **Used w/eng. S/N 9505 Thru D *** Eff. w/eng. S/N D & Up ITEM NUMBER * QTY. ** *** DESCRIPTION HOSE, breather tube CLAMP TUBE, breather CLAMP, breather tube CAPSCREW LOCKWASHER NUT BRACKET, breather tube clamp CAP, breather CAP, breather (Used prior to Eng. S/N D-03046) CAP, breather (Eff. w/eng. S/N D-03046) 28 { COVER ASSY., cylinder head COVER ASSY., cylinder head GASKET, cylinder head cover GASKET, fire ring (Eff. w/eng. S/N 24338) 3 { GASKET, cylinder head (Used prior to Eng. S/N 24338) GASKET ASSY., cylinder head (Incl. item 30) (Eff. w/eng. S/N 24338) VALVE, exhaust VALVE, exhaust (Replaces ) VALVE, exhaust INSERT, exhaust valve (Replaces ) INSERT, exhaust valve INSERT. exhaust valve (.005" oversize) Replaces 4538) 4543 INSERT, exhaust valve (.005" oversized) (* Used as required) Continued 56

62 CYLINDER HEAD & VALVES (Cont'd) Diesel Used Prior to Eng. S/N 9505 **Used w/eng. S/N 9505 Thru D *** Eff, w/eng. S/N D & Up QTY. ITEM NUMBER * ** *** DESCRIPTION { VALVE, intake VALVE, intake VALVE, intake STUD, fuel injection nozzle DAMPENER, valve spring (Not Illustrated) 57

63 OIL PUMP Diesel Used Prior to Eng. S/N 4223 ** Used Eng. S/N 4223 Thru *** Eff. w/eng. S/N 2230 & Up ITEM QTY. NUMBER * ** *** DESCRIPTION PUMP ASSY., oil (Incl. items 3 thru 8 & 3) (Not serviced) PUMP ASSY., oil (Incl. items 3 thru 2) (Not serviced) PUMP ASSY., oil (Incl. item 3 thru 2) (Replaces and ) \ CAPSCREW (Used prior to Eng. S/N 2230) LOCKWASHER CAPSCREW (Eff. w/eng. S/N 2230 WIRE, oil strainer STRAINER, oil COVER, oil pump CAPSCREW & LOCKWASHER ASSY. GEAR, idler SHAFT, idler gear Continued 58

64 OIL PUMP (Cont'd) Diesel * Used Prior to Eng. S/N 4223 ** Used Eng. S/N 4223 Thru *** Eff. w/eng. S/N 2230 & Up IT EM NUMB ER * QTY. ** *** DESCRIPTION GEAR, drive SHAFT, drive GEAR, drive PIN, roll BODY, oil pump BODY, oil pump 957 PIN, roll PISTON, relief valve SPRING, relief valve RETAINER, spring BODY, oil pump GASKET, flange FLANGE, oil pump CAPSCREW 9739 CAPSCREW LOCKWASHER PLUG, relief valve WASHER, relief valve VALVE ASSY., relief 5 9

65 ITEM NUMBER QTY. DESCRIPTION OIL PAN Diesel PAN, oil CAPSCREW LOCKWASHER GASKET, oil pan SEAL, oil level gauge ADAPTOR, oil level gauge GAUGE, oil level (Incl. item 3) PLUG, drain GASKET, drain plug 60

66 FLYWHEEL & RING GEAR Diesel ITEM NUMBER QT Y. DESCRIPTION f RETAINER, oil seal (Used prior to Eng. S/N 7356) SEAL, oil (Used w/ Eng. S/N thru D-06370) (Not serviced) Use Item 2 and SEAL, oil (Eff. w/eng. S/N D-06370) (Replaces SEAL, oil, outer ADAPTOR, flywheel housing DOWEL SEAL, oil, inner (Used prior to Eng. S/N 7356) FLYWHEEL ASSY., (Incl. item 6 & 7) (Replaces ) GEAR, ring (Replaces ) BUSHING, flywheel CAPSCREW CAPSCREW LOCKWASHER DOWEL PIN, locator (Timing) (Replaces ) SLEEVE, wear (Eff. w/eng. S/N D-06370) (Replaces 45483) 6

67 GEAR COVER Diesel ITEM NUMBER QTY DESCRIPTION STUD Nut, 3/8 NC Washer, lock, 3/ SEAL, oil, front COVER, gear Capscrew Capscrew, 3/8 NC x 2-/ Capscrew, 3/8 NC x -/ Washer, lock, 3/ GASKET,geai- cover PLATE ASSY., cylinder front STUD Dowel, 3/8 x Capscrew, 3/8 NC x 7/ Washer, lock 3/ GASKET, front plate

68 MEMO 63

69 INTAKE & EXHAUST MANIFOLD Diesel IT EM NUMBER QTY. DESCRIPTION WASHER, clamp NUT CLAMP, manifold MANIFOLD, intake (Used prior to Eng. S/N 845) MANIFOLD, intake (Eff. w/eng. S/N 845) 9934 PLUG, pipe MANIFOLD, exhaust (Used prior to Eng. S/N D-05605) MANIFOLD, exhaust (Eff. w/eng. S/N D-05605) GASKET, intake & exhaust port

70 WATER INLET & OUTLET PIPES Diesel ITEM NUMBER QTY. DESCRIPTION HOSE, radiator CLAMP, hose PIPE, radiator outlet WASHER, copper CAPSCREW PIPE, water inlet PLUG, pipe GASKET, water inlet pipe TUBE, by-pass NUT, by-duty (Incl. SLEEVES) ELBOW, water outlet PLUG, pipe 8 ( GASKET, water outlet elbow (Replaces ) GASKET, water outlet elbow Continued

71 WATER INLET & OUTLET PIPES (Cont'd.) Diesel ITEM NUMBER QTY. DESCRIPTION THERMOSTAT PIPE, radiator inlet HOSE, radiator top CLAMP, hose 66

72 8 9 ITEM NUMBER QTY. FUEL INJECTION NOZZLES & LINES Diesel DESCRIPTION HOLDER ASSY., injection nozzle (Incl. Items thru 0) (Used Prior to Eng. S/N D-05033) HOLDER ASSY., injection nozzle (Incl. Items thru 0) (Replaces 45433) NUT LOCKWASHER NUT, cap GASKET, cap nut NUT, adjusting screw SCREW, adjusting (Replaces 4524) SPRING, spindle rod ROD, spindle 7 4 BODY, nozzle holder (Not serviced. Order Holder Assy.) r NOZZLE ASSY. (Incl. Item 0) (Used prior to Eng. S/N D-05033) NOZZLE ASSY. (Incl. Item 0) (Replaces 45434) Continued 67

73 FUEL INJECTION NOZZLES & LINES (Cont'd.) Diesel ITEM NUMBER QTY. DESCRIPTION NUT, nozzle retaining GASKET, nozzle holder to cylinder head TUBE ASSY., drip manifold (Incl. NUTS & SLEEVES) (Replaces ) SLEEVE ELBOW (No. 2 & 3 nozzle) TEE (No. & 4 nozzle) NUT LINE, fuel (no. cylinder) LINE, fuel (no. 2 cylinder) LINE, fuel (no. 3 cylinder) LINE, fuel (no. 4 cylinder) NUT, fuel line SLEEVES, fuel line PLATE, fuel line clamp CAPSCREW LOCKWASHER NUT SPACER, fuel line clamp TUBE ASSY., overflow (Incl. NUTS & SLEEVES) (Replaces ) SLEEVE NUT 68

74 ITEM NUMB ER QTY. DESCRIPTION FUEL INJECTION PUMP Diesel PUMP ASSY., fuel injection (Muckland Tractor) (2000RPM) (Used prior to S/N D-03548) (Refer to page 70 for component parts) PUMP ASSY., fuel injection (Used prior to Eng. S/N 7742) (650 RPM) (Refer to page 70 for component parts) < PUMP ASSY., fuel injection (Used Eng. S/N 7742 thru D-08499)(650 RPM)(Refer to page 76 for component parts) PUMP ASSY., fuel injection (Muckland Tractor) (2000RPM)(Eff. w/eng. S/N D-03548) (Refer to page 76 for component. arts) PUMP ASSY., fuel injection (800 RPM) (Eff. w/eng. S/N D-08500) (Refer to page 76 for component parts) NUT WASHER, serrated, pump mounting GEAR, driven GEAR, drive (Replaces ) DOWEL ( CAPSCREW, drive gear LOCKWASHER BOLT, (Eff. Eng. S/N D 028) LOCKWIRE, capscrew (Prior Eng. S/N D028) 69

75 : 5 86 h.qi),77 (Ay lait 54 CI s'e Ck 'CI 4.) ':i 4k 48 5 _.= 47 a lit iik p 6\ : cic FUEL INJECTION PUMP Used Prior to Eng. S/N 7742 Muckland Tractor Prior to Eng. S/N D