2-colour Display High Precision Digital Pressure Switch

Transcription

1 High Precision, -colour Display Digital Pressure Switch -colour Display High Precision Digital Pressure Switch Series ZSE/ISE Features djustable vacuum, positive and compound pressure switch with display. Large, easy to read, colour (green/red), digit display. Easy operation: -step setting and copy display. nalogue output: -m or -5V. Switch output: pnp/npn or pnp/npn. Replaceable one touch fittings. Can be panel mounted. Choice of mounting brackets also available. dditional functions: Secret code setting function, power-saving function, resolution-switch function. Specifications Series ZSE/ISE nalogue output Display Display accuracy Indicator light Model Rated pressure range Regulating pressure range Proof pressure Setting/display resolution pplicable fluid Power supply voltage Current consumption Switch output Maximum load current Maximum applied voltage Residual voltage Response time Short circuit protection Repeatability Hysteresis Window comparator Hysteresis mode mode Environment resistance Note ) Voltage output Note ) Current output Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance Vibration resistance Impact resistance Temperature characteristics Output voltage Linearity Output impedance Output current Linearity Load impedance ZSE (Vacuum pressure). to. kpa. to 5. kpa 5 kpa. kpa ZSEF (Compound pressure). to. kpa 5. to 5. kpa 5 kpa. kpa ir, non-corrosive gas, non-flammable gas to VDC ±%, Ripple (p-p) % or less (with power supply polarity protection) m or less NPN or PNP open collector output, NPN or PNP open collector outputs (selectable) 8 m 8 V (with NPN output) V or less (with load current of 8 m).5 ms or less (with anti-chattering function:,, 5,, ms) With short circuit protection ±.% F.S. ± digit Variable ( or above) Note ) ISE (Positive pressure). to. MPa.5 to.5 MPa.5 MPa. MPa to 5V ±.5% F.S. or less (with rated pressure range).6 to 5 V ±.5% F.S. or less (with rated pressure range) ±% F.S. or less pprox. kω to m ±.5% F.S. or less (with rated pressure range). to m ±.5% F.S. or less (with rated pressure range) ±% F.S. or less Maximum load impedance: Ω with power supply voltage of V; 6 Ω with power supply voltage of V Minimum load impedance: 5 Ω -digit, 7-segment, -colour LCD (Red and Green) ±% F.S. ± digit (ambient temperature of 5 ± C) Lights up when switch output is ON. OUT: Green, OUT: Red IP Operating: to 5 C, Stored: to 6 C (no freezing or condensation) Operating/Stored: 5 to 85% RH (no condensation) VC for minute between live parts and enclosure 5 MΩ or more between live parts and enclosure (at 5 VDC Mega) to 5 Hz,.5 mm amplitude (or m/s acceleration), in X, Y, Z directions, for hours each (Non-energized) m/s in X, Y, Z directions, times each (non-energised) ±% F.S. (based on 5 C) Oilproof heavy-duty vinyl cable, cores ø.5, m Lead wire cores Conductor area:.5 mm (WG6), Insulator O.D.:. mm Standards CE Marking, UL/CS, RoHS compliance Note ) If applied pressure fluctuates near the set value, set the hysteresis above the fluctuation range to prevent chattering. Note ) When analogue the voltage output is selected, a simultaneous selection of switch output and current output is not available. Note ) When analogue the current output is selected, a simultaneous selection of switch output and voltage output is not available. FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 5

2 Series ZSE/ISE High Precision, -colour Display Digital Pressure Switch How to order For positive pressure ISE N M For vacuum/ compound pressure Rated pressure range ZSE ZSEF Rated pressure range ISE. to MPa Output N P B C Note) D Note) E Note) F Note) ZSE N M to kpa to kpa Piping NPN open collector output PNP open collector output NPN open collector outputs PNP open collector outputs NPN open collector output + nalogue voltage output NPN open collector output + nalogue current output PNP open collector output + nalogue voltage output PNP open collector output + nalogue current output Note) Made to Order ccesories for mounting ZS-8- None Bracket R/8 (M5 female threaded) Bracket B CH One-touch fitting ø mm, ø5/ inch Straight type ZS-8- C6H One-touch fitting ø6 mm Panel mount adapter CL One-touch fitting ø mm, ø5/ inch Elbow type ZS-7-C C6L One-touch fitting ø6 mm Panel mount adapter + front protection cover Display unit With unit display switching function Fixed SI unit Note ) M Note ) With unit display P switching function (Initial value PSI) Note ) Made to Order Note ) Fixed unit kpa, MPa L G Without lead wire Lead wire with connector (Lead wire length m) Note) Lead wire with connector (lead wire length m) Note) and with connector cover Option Connector cover ZS-7-D Note) For output types N and P, the number of core of lead wires will be, and for other types, it will be. Piping Specifications Model CH C6H CL Port size R/8 M5 x.8 One-touch fitting, Straight type ø mm ø5/ inch ø6 mm One-touch fitting, Elbow type Wetted Sensor pressure receiving area Sensor pressure receiving area: Silicon parts C6 (electroless nickel plated) material Piping port O-ring: HNBR Including lead wire with connector ( cores, m) 8 g 7 g 7 g 75 g Weight Including lead wire with connector ( cores, m) 85 g 7 g 75 g 79 g Excluding lead wire with connector g g g 7 g ø mm ø5/ inch C6L ø6 mm PBT, POM, Stainless steel, C6 (electroless nickel plated) O-ring: NBR 7 g 77 g 5 g 5

3 High Precision, -colour Display Digital Pressure Switch Series ZSE/ISE Optional Part No. When optional parts are required separately, use the following part numbers to place an order. Part no. Option Note Front protection cover Lead wire with connector Lead wire with connector Lead wire with connector (with connector cover) Lead wire with connector (with connector cover) ZS-7- ZS-8-L ZS-8-L ZS-8-G ZS-8-G cores, for output, m cores, for outputs, m cores, for output, m cores, for outputs, m Part no. Option Note Lead wire with a connector for copying Lead wire unit with a connector for copying One-touch fittings ø mm straight One-touch fittings ø6 mm straight One-touch fittings ø/ inch straight One-touch fittings ø mm elbow One-touch fittings ø6 mm elbow One-touch fittings ø/ inch elbow Operating manual CD-ROM ZS-8-5L ZS-8-U ZS-8-CH ZS-8-C6H ZS-8-N7H ZS-8-CL ZS-8-C6L ZS-8-N7L ZS-8-H cores, copy function, m Copy function (up to slaves) O-ring, one-touch clip included O-ring, one-touch clip included O-ring, one-touch clip included O-ring, one-touch clip included O-ring, one-touch clip included O-ring, one-touch clip included Dimensions ±. x M x.5 thread depth Lead wire with connector ±. Width across flats M5 x.8.5 : R/8 N: NPT/8 Straight 7.55 Elbow.7 ø9.8 ø 5.6 One-touch fitting type ø ø Straight B Elbow B 9..6 C With one-touch fitting.85 ø9. FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 55

4 Series ZSE/ISE With bracket High Precision, -colour Display Digital Pressure Switch.5 5 Note) Bracket configuration allows mounting in four directions. Note) Bracket configuration allows mounting in four directions. Dimensions Panel mount R R Panel thickness.5 to Panel mount adapter + Front protection cover (.) Bracket Bracket B Panel thickness.5 to 6 56

5 High Precision, -colour Display Digital Pressure Switch Series ZSE/ISE Dimensions Panel fitting dimensions pc. mounting Multiple ( pcs. or more) horizontal mounting. x n pcs. +.5 x (n pcs. ) x R or less or more.. x R or less Multiple ( pcs. or more) vertical mounting x n pcs. +.5 x (n pcs. ). or more x R or less FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 57

6 Series ZSE/ISE High Precision, Digital Pressure Switch High Precision Digital Pressure Switch Series ZSE/ISE Features Integrated air pressure or vacuum sensor, IP65 construction for damp/dirty areas. Dedicated model for compound pressure (vacuum to low positive pressure). Two independently programmable outputs, hysteresis or window comparator operation. Can be panel or wall mounted plus choice of mounting brackets available. Digital or digital + analogue outputs. utoshift input for remote recalibration, auto preset, NO/NC switching and display zero functions. Fast response times, adjustable down to.5ms. Threaded or one-touch fitting pressure connections. Can display metric or imperial units. How to Order For positive pressure ISE L ccessories Nil None Bracket For vacuum/compound pressure ZSE L ZS-- Nil F Set pressure range. to. kpa For vacuum pressure. to. kpa For compound pressure : R /8 (With M5 female threads) R /8 M5 female threads WF: G/8 Reverse pressure two directions Piping specifications /8 /8 Lead wire length L m ZS--B ZS-- Bracket B Panel mount Panel mount + Front protective cover ZS--C C: With ø One-touch fitting C6: With ø6 One-touch fitting M5: M5 (Female threads) Wall mount Wall mount Option ø, ø6 One-touch fitting M5 Input/Output specifications NPN open collector outputs + analog output NPN open collector outputs + auto shift input 6 PNP open collector outputs + analog output 7 PNP open collector outputs + auto shift input Option Note When equipped with auto shift function, the following ranges can be set. Set pressure range. to. kpa. to. kpa. to. MPa Setting range. to. kpa. to. kpa. to. MPa 58

7 High Precision, Digital Pressure Switch Series ZSE/ISE Specifications Rated pressure range Operating pressure range/set pressure range Withstand pressure Set pressure resolution pplicable fluid Power supply voltage Current consumption Switch output Repeatability Hysteresis mode Hysteresis Window comparator mode Response time (With anti-chattering function) Output short circuit protection Display Display accuracy Indicator light Note ) nalogue output uto shift input Note ) Environmental resistance Temperature characteristics Port size Lead wire Weight kpa MPa kgf/cm bar psi mmhg InHg Enclosure mbient temperature range mbient humidity range Withstand voltage Insulation resistance ZSEF (Compound pressure). to. kpa. to. kpa ZSE (Vacuum pressure). to. kpa. to. kpa 5 kpa ir, Non-corrosive/Non-flammable gas to VDC ±%, Ripple (p-p) % or less 55 m or less NPN or PNP outputs Max. load current : 8 m Max. applied voltage : Residual voltage VDC (With NPN output) : V or less (With 8 m load current) ±.% F.S. ±digit or less Variable Fixed ( digits) Note).5 ms or less (With anti-chattering function: ms, 9 ms and 768 ms selections) Yes / digit LED display (Sampling cycle: 5 times/sec.) ±% F.S. ± digit or less (at ambient temperature of 5 ± C) Green LED (OUT: Lights when ON), Red LED (OUT: Lights when ON) Output voltage: to 5 V ±5% F.S. or less (in rated pressure range) Linearity: ±% F.S. or less Output impedance: pprox. kω No-voltage input (Reed or solid state), input 5 ms or more IP65 Note ) For ZSE (F)/ISE-- 6 Note ) For ZSE (F)/ISE-- 7 Note ) For ZSEF (compound pressure) with psi indication, this is. to. psi. Note ) For ZSEF (compound pressure) with psi indication, zero clear is in the range of ±. psi. Function list ISE (Positive pressure). to. MPa. to. MPa.5 MPa.... Output voltage: to 5 V ±.5% F.S. or less (in rated pressure range) Linearity: ±% F.S. or less Output impedance: pprox. kω Operating: to 5 C, Stored: to 6 C (No condensation or freezing) Operating/Stored: 5 to 85% RH (No condensation) VC for min. between lead wires and body 5 MΩ or more (at 5 VDC) between lead wires and body In a temperature range of to 5 C, ±% F.S. or less of pressure measured at 5 C : R /8, M5 WF:G /8 C: With ø One-touch fitting, C6: With ø6 One-touch fitting, M5: M5 female threads 5-wire oil resistant heavy-duty cord (.5 mm ) approx. 6 g, C/C6/M5 types approx. 9 g (Each including.6 m lead wires) Note) When equipped with auto shift function, the following ranges can be set. Set pressure range. to. kpa. to. kpa. to. MPa Setting range. to. kpa. to. kpa. to. MPa nti-chattering: djusts the response time to prevent momentary fluctuations in the pressure altering the output state. Key lock: The buttons can be locked to prevent unintentional adjustment. Peak hold: The maximum value seen by the unit can be retained on the display. Bottom hold:the minimum value seen by the unit can be retained on the display. Zero function: The display value can be adjusted back to zero with pressure removed. Unit conversion:the display unit can be selected to suit user preference. FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 59

8 Series ZSE/ISE High Precision, Digital Pressure Switch Dimensions ZSE(F)/ISE : R /8.5 M5 thread depth 5 MPa M thread depth Width across flats ø.5 6 () Lead wire length OUT SET OUT tmospheric release port For splash proof use (IP65), insert an air tube into the atmospheric release port ZSE(F)/ISE-WF -M thread depth Rc / MPa G /8 OUT OUT R SET tmospheric release port ø.5 6 () Lead wire length For splash proof use (IP65), insert an air tube into the atmospheric release port. 55

9 High Precision, Digital Pressure Switch Series ZSE/ISE Dimensions ZSE(F)/ISE C C6 M MPa One-touch fitting ø, ø OUT SET OUT ø.5 6 () Lead wire length tmospheric release port For splash proof use (IP65), insert an air tube into the atmospheric release port. For M5 8.5 M5 thread depth 5 FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 55

10 OUT U P Series ISE7 -colour Display Digital Pressure Switch for ir -colour Display Digital Pressure Switch/For ir Series ISE7 Features Integrated pressure switch for air. Robust metal case construction. IP67 waterproof design. Removable cable. Red / Green dual colour display. NPN and PNP outputs available. Can be operated in hysteresis or window comparison mode. Mounting bracket available. How to Order ISE7 F S Connector Pin ssignments Output - Brown White Blue Black DC (+) OUT (PNP) DC ( ) OUT (NPN) Output -65 Brown White Blue Black DC (+) NC DC ( ) OUT (PNP) ccessories Piping G/ (ISO79) Output Fixed setting: NPN open collector output (Pin no. ) + PNP open collector output (Pin no. ) 65 PNP open collector output (Pin no. ) When option parts are required separately, use the following part numbers to place an order. Option Part No. Note Option Lead wire with M connector (5m), S straight Lead wire with M connector (5m), L right-angled Bracket ZS-- SET DOWN Bracket B and the bracket assembly make up one set. Note: Mounting screws are not included. Bracket B Bracket assembly Lead wire with M connector, straight (spare) Lead wire with M connector, right-angled (spare) ZS--B ZS--C Lead wire length: 5m Lead wire length: 5m 55

11 -colour Display Digital Pressure Switch for ir Series ISE7 Specifications Rated pressure range Set pressure range Proof pressure Set pressure resolution Fluid Power supply voltage Current consumption Switch output Max. load current Max. applied voltage Residual voltage Response time Short circuit protection Repeatability Hysteresis mode Hysteresis Window comparator mode Display Display accuracy Indication light Functions Enclosure Fluid temperature range Environmental Operating humidity range Operating temperature range resistance Withstand voltage Insulation resistance Temperature characteristics (Based on 5 C: Operating temperature range) Standard Wetted material Port size Lead wire Mass (Weight) Note ) The NPN and PNP outputs function for a single set point. Note ) G/: pplicable to ISO79- Dimensions ISE7 to MPa. to MPa.5MPa.MPa ir, lnert gas, Non-flammable gas to VDC, Ripple (p-p) % or less (with power supply polarity protection) 55 m or less (at no load) Output -: Fixed setting; NPN open collector output (Pin no. ) + PNP open collector output (Pin no. ) Note ) Output -65: PNP open collector output (Pin no. ) Note ) 8 m V (with NPN output) V or less (with load current of 8 m).5 ms (Response time selections with anti-chattering function: ms, 6 ms, 6 ms, ms, ms) With short circuit protection ±.5%F.S. djustable (can be set from ) digit, 7-segment indicator, -colour display (red and green) can be interlocked with the switch output, Sampling cycle: 5 times/s ±%F.S. ± digit or less (at 5 C ± C) Light up when output is ON (Green) nti-chattering function, Unit display switching function, Zero out function, Key lock function IP67 to 5 C (with no freezing or condensation) Operating: to 5 C, Stored: to 6 C (with no freezing or condensation) Operating and stored: 5 to 85%RH (with no condensation) VC for min. between live parts and enclosure 5 MΩ or more between live parts and enclosure (at 5 VDC Mega) ±%F.S. or less Compliant with CE Marking and UL/CS (UL58) standards Fitting: C6 (electroless nickel plated), Sensor port: PBT, Sensor pressure receiving area: silicon, O-ring: NBR F: G/ (ISO79) Note ) Lead wire with M -pin pre-wired connector (5 m) 9 g (excluding the lead wire with M -pin pre-wired connector) The dimensions for ISE7 are common to ISE75 and ISE75H. Please see under ISE75 (following pages) for dimensions. FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 55

12 OUT U P Series ISE75 -colour Display Digital Pressure Switch for General Fluids -colour Display Digital Pressure Switch For General Fluids Series ISE75/75H Features Integrated pressure switch for air or fluids. ll wetted parts stainless steel. Robust metal case construction. IP67 waterproof construction. Maximum operating pressure Mpa or 5 MPa. Orange Removable cable. Red / Green dual colour display. NPN and PNP outputs available. Can be operated in hysteresis or window comparison mode. Gray Mounting bracket available. ISE75 (MPa) ISE75H (5MPa) How to Order MPa ISE75 F S 5MPa ISE75H F S Connector Pin ssignments Output - Brown White Blue Black DC (+) OUT (PNP) DC ( ) OUT (NPN) Output -65 Brown White Blue Black DC (+) NC DC ( ) OUT (PNP) Piping F G/ (ISO79) Note ) Note ) G/: pplicable to ISO79- Output Fixed setting: NPN open collector output (Pin no. ) + PNP open collector output (Pin no. ) 65 PNP open collector output (Pin no. ) Optional Part No. Option Lead wire with M connector (5m), S straight Lead wire with M connector (5m), L right-angled When option parts are required separately, use the following part numbers to place an order. Option Part No. Note Bracket ZS-- Bracket B SET DOWN Bracket B and the bracket assembly make up one set. Bracket assembly Lead wire with M connector, straight (spare) Lead wire with M connector, right-angled (spare) ZS--B ZS--C Lead wire length: 5m Lead wire length: 5m 55

13 -colour Display Digital Pressure Switch for General Fluids Series ISE75 Specifications Rated pressure range Set pressure range Proof pressure Set pressure resolution Fluid Power supply voltage Current consumption Switch output Repeatability Hysteresis Display Display accuracy Indication light Functions Environmental resistance Temperature characteristics (Based on 5 C: Operating temperature range) Standard Wetted material Port size Lead wire Max. load current Max. applied voltage Residual voltage Response time Short circuit protection Hysteresis mode Window comparator mode Enclosure Fluid temperature range Operating temperature range Operating humidity range Withstand voltage Insulation resistance Mass (Weight) Note ) The NPN and PNP outputs function for a single setpoint. Note ) G/: pplicable to ISO79- ISE75 ISE75H to MPa to 5MPa. to MPa.5 to 5MPa MPa 5MPa.MPa Fluid that will not corrode stainless steel SUS and SUS6 to VDC, Ripple (p-p) % or less (with power supply polarity protection) 55 m or less (at no load) Output -: Fixed setting; NPN open collector output (Pin no. ) + PNP open collector output (Pin no. ) Note ) Output -65: PNP open collector output (Pin no. ) Note ) 8 m V (with NPN output) V or less (with load current of 8 m).5 ms (Response time selections with anti-chattering function: ms, 6 ms, 6 ms, ms, ms) With short circuit protection ±.5%F.S. djustable (can be set from ) digit, 7-segment indicator, -colour display (red and green) can be interlocked with the switch output, Sampling cycle: 5 times/s ±%F.S. ± digit or less (at 5 C ± C) Light up when output is ON (Green) nti-chattering function, Unit display switching function, Zero out function, Key lock function IP67 5 to 8 C (with no freezing or condensation) Operating: 5 to 5 C, Stored: to 6 C (with no freezing or condensation) Operating and stored: 5 to 85%RH (with no condensation) 5 VC for min. between live parts and enclosure 5 MΩ or more between live parts and enclosure (at 5 VDC Mega) ±%F.S. or less Compliant with CE Marking and UL/CS (UL58) standards Pressure receiving area: Stainless steel SUS6, Fittings: Stainless steel SUS F: G/ (ISO79) Note ) Lead wire with M -pin pre-wired connector (5 m) g (excluding the lead wire with M -pin pre-wired connector) FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 555

14 Series ISE75 -colour Display Digital Pressure Switch for General Fluids Dimensions / / ISE H Piping port F: G/ (ISO79) 9 9 MPa Lead wire with M connector (5m) straight 7 OUT U P SET DOWN.5 (8.7) 5.7 With bracket (8.) Lead wire with M connector (5m) right-angled MPa Piping port F: G/ (ISO79) OUT U P DOWN SET (8.7) (8.)

15 -Colour display, Digital Pressure Switch for General Fluids Two colour display, Digital Pressure Switch For Fluids Series ZSE8/ISE8 Features Stainless steel construction. Make ZSE/ISE8 suitable for working with a wide range of fluids, even aggresive Four pressure ranges available working in the following regimes: - Vacuum: from -. to MPa - Compound: from -. to +. MPa - Positive: from -. to + MPa and from -. to + MPa. -colour display (LCD) Low leakage versions available. Simplied operation. Rear and bottom piping available as standard options. nalogue current output option added. Water hammer protection construction. Series ZSE8/ISE8 RoHS How to Order Rated pressure range 8. to MPa 8H. to MPa For positive pressure ISE 8 N ccessories None With bracket For vacuum/ compound pressure N F C B L ZSE 8 N Rated pressure range 8 to kpa 8F to kpa R/ (M5 female threaded) NPT/ (M5 female threaded) G/ (M5 female threaded) Rc/8 URJ/ TSJ/ R/ (M5 female threaded) Piping Rear ported Bottom ported ZS-- Rear ported With bracket Note) Panel mount ZS-5-C ZS-5- Bottom ported ZS--D ZS-5-B NPT/ NL (M5 female threaded) CL Rc/8 L URJ/ BL TSJ/ Rear ported Panel mount + Front protection cover Bottom ported ZS-5-E N P B R T S V Input/Output NPN open collector output PNP open collector output NPN open collector outputs PNP open collector outputs NPN open collector outputs + nalogue voltage output/uto-shift switching PNP open collector outputs + nalogue voltage output/uto-shift switching NPN open collector outputs + nalogue current output/uto-shift switching PNP open collector outputs + nalogue current output/uto-shift switching ZS-5-F Rear ported Note) Rear ported only Bottom ported FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 557

16 Series ZSE8/ISE8 -Colour display, Digital Pressure Switch for General Fluids Specifications Rated pressure range Set pressure range Withstand pressure Wetted parts material pplicable fluid Port size Power supply voltage Current consumption Switch output Repeatability Hysteresis nalogue output uto-shift input Display Display accuracy Indicator light Function Environmental resistance Temperature characteristics Lead wire Standards Model Maximum load current Maximum load voltage Residual voltage Response time Short circuit protection Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance Vibration resistance Impact resistance G/ is available for rear ported only. Hysteresis mode Window comparator mode Output voltage Voltage (Rated pressure range) output Linearity Output impedance Output current (Rated pressure range) Current Linearity output Load impedance ZSE8 (Vacuum pressure) R/, NPT/, G/, URJ/, TSJ/, Rc/8 Piping direction: Rear/Bottom to VDC ±%, Ripple (p-p) % or less (with power supply polarity protection) 5 m or less NPN output, NPN outputs, PNP output, PNP outputs 8 m 8 V (at NPN output) V or less (with load current of 8 m).5 ms (with anti-chattering function:,, 5,, ms) Yes ±.% F.S. ± digit nti-chattering, Zero-out, Key lock function, uto-preset, uto-shift, Unit display switching, Power-saving mode IP65 ISE8 (Positive pressure). to. MPa.5 to. MPa MPa. to. kpa. to. kpa. to. MPa. to. kpa. to. kpa.5 to. MPa 5 kpa MPa Pressure sensor: Stainless steel 6, Fitting: Stainless steel Fluids do not corrode stainless steel 6 and to 5 V ±.5% F.S. ZSE8F (Compound pressure) Variable ( or above) ±% F.S. or less pprox. kω. to m. to m to m ±.5% F.S. ±.5% F.S. ±.5% F.S. ±% F.S. or less Maximum load impedance: Ω (Power supply voltage V) 6 Ω (Power supply voltage V) Minimum load impedance: 5 Ω Non-voltage input (Reed or Solid state), Low level:. V or less, 5 ms or longer input /-digit, 7-segment, -color LCD (Red/Green) ±% F.S. ± digit (mbient temperature of 5 ± C) Lights up when output is turned ON. OUT, OUT: Orange Operating: to 5 C, Stored: to 6 C (No freezing or condensation) Operating/Stored: 5 to 85% RH (No condensation) 5 VC for minute between live parts and case MΩ or more between live parts and case (at 5 VDC Mega) to 5 Hz if amplitude smaller than 5 mm or acceleration lower than m/s, in X, Y, Z directions, for hours each (De-energised) m/s in X, Y, Z directions, times each (De-energised) ±% F.S. (Based on 5 C, within operating temperature range) Oilproof heavy-duty vinyl cable, cores (N.P) cores (.B) 5 cores (R.T.S.V) CE marking, UL/CS, RoHS compliance ISE8H (Positive pressure).6 to 5 V ±.5% F.S..8 to 5 V ±.5% F.S. ø.5, m Conductor area:.5 mm (WG6) Insulator O.D.:.95 mm Piping Specifications Model Port size Weight (Bottom ported) Weight (Rear ported) Leakage R/ 7 g 89 g N NPT/ 8 g 9 g F G/ 86 g C Rc/8 g 86 g URJ/ g 9 g x 5 Pa m /s x Pa m /s B TSJ/ g 8 g 558

17 -Colour display, Digital Pressure Switch for General Fluids Series ZSE8/ISE8 Dimensions ZSE/ISE8- N F C B 8.8 tmospheric vent port ø.6.7 M5 thread depth (N: 5.) x M thread depth Width across flats 7 Piping port : R/ N: NPT/ ø Piping port Rc/8 -C: Rc/ F: G/ Piping port G/ Piping port URJ/ Piping port TSJ/ -: URJ/ -B: TSJ/ FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 559

18 Series ZSE8/ISE8 -Colour display, Digital Pressure Switch for General Fluids Dimensions ZSE/ISE8- L NL CL L BL 8.8 tmospheric vent port ø M5 thread depth 5 Width across flats 7 x M thread depth 6.5 (NL: 6.5) Piping port L: R/ NL: NPT/ ø Piping port Rc/8 Piping port URJ/ Piping port TSJ/ -CL: Rc/8 -L: URJ/ -BL: TSJ/ 56

19 -Colour display, Digital Pressure Switch for General Fluids Series ZSE8/ISE8 Dimensions With bracket (Rear ported) ZS ø View With bracket (Rear ported) ZS--D x ø With bracket (Bottom ported) ZS-5-5 ø.5 FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 56

20 Series ZSE8/ISE8 -Colour display, Digital Pressure Switch for General Fluids Dimensions Panel mount (Rear ported) ±. 6±. x R or less 67 or more 5. Panel-cut dimensions 6 6 x n pcs. + x (n pcs. ) x R or less 56

21 -Colour display, Digital Pressure Switch for General Fluids Series ZSE8/ISE8 Dimensions Panel mount (Bottom ported) ± Panel-cut dimensions 6±. 6 6 x n pcs. + x (n pcs. ) x R or less x R or less FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 56

22 Series PSE5 Pressure Sensor Pressure Sensor for ir Series PSE5 Features Remote sensor for air or inert gas -5 volt analogue output different models to suit pressure or vacuum Stainless steel case Removable cable for easy installation M5 connection port Compact design How to Order PSE5 Pressure sensing range Normal pressure [ to MPa] Vacuum [ to kpa] Low pressure [ to kpa] Compound pressure [ to kpa] M5 Port size M5 M5 R6 ø6 plug in stem L Option Sensor cable ( m) Without connector L Sensor cable ( m) + Connector ( pc.) Connector CL Specifications Model Rated pressure range Proof pressure Fluid Power supply voltage Current consumption Output specification ccuracy Linearity Repeatability Power supply voltage effect Resistance Enclosure Temperature range Temperature characteristics (Based on 5 C) Port size Material Sensor cable/option PSE5-M5 PSE5-M5 PSE5-M5 PSE5-M5 to MPa to kpa to kpa to kpa.5 MPa 5kPa ir/non-corrosive gas to VDC (Ripple ±% or less) 5 m or less nalog output ( to 5 V, Output impedance: pprox. k ) ±% F.S. or less (Within rated pressure range, mbient temperature 5 ± C) ±% F.S. or less ±% F.S. or less ±% F.S. or less based on the analog output at 8 V ranging from to VDC IP to 5 C; Stored: to 7 C (No freezing or condensation) ±% F.S. or less based on the analog output value at 5 C from a range of to 5 C M5, R6 Plug in Body: Stainless steel Grade, Internal enclosure: PPE; Pressure sensor: Silicon; O-ring: NBR Halogen-free heavy-duty cord, ø.7,.5 mm, cores, m Note) t the factory, the connector is not connected to the cable, but packed together with it for shipment. ccessories When only optional parts are required, order using the part numbers listed below. Description Part no. Note Connector Sensor cable ZS-8-C ZS-6-F e-con Connector Cable length: m Connector + Cable length: m ZS-6-J The connector is not connected to Sensor cable the cable at the time of shipment. Dimensions PSE5-M5 ø.5 ø M5 Pressure port..5 Dimensions R6 Plug-in type 5.5. Pressure port. ø ø7. 5. With sensor cable ø. ø.7 ø ø7. ød 5. 56

23 Compact Pressure Sensor Series PSE5 Compact Pressure Sensor For ir Series PSE5 Features Miniature sensor for dry air and vacuum Several different porting options Different pressure ranges available to 5v analogue output Can be ordered with connector for SMC display unit Ultra compact and light weight How to Order Pressure sensing range Positive pressure (-MPa) Vacuum ( to kpa) Compound pressure ( to kpa) PSE5 Increased ccuracy Nil ±% FS ±% FS M C Option (Connector) Nil C Connector for PSE or PSE display controllers pc. Without Port size M M5 M M5 IM5 M5 female thread, through type Note) t the factory, the connector is not connected to the cable, but packed together with it for shipment. R /8 (With M5 female thread) R ø plug-in reducer R6 ø6 plug-in reducer Specifications Model Rated pressure range Proof pressure Fluid Power supply voltage Current consumption Output specification ccuracy (mbient temperature of 5 C) Linearity Repeatability Power supply voltage effect Enclosure Resistance Operating temperature range Operating humidity range Withstand voltage Insulation resistance Temperature characteristics PSE5 - MPa.5MPa ±.7% FS IM5H M5 female thread, through type (With mounting hole) ccessories Description Connector for PSE/ Part no. ZS-8-C Conforms to CE marking and UL (CS) standards. PSE5 PSE5 to kpa to kpa 5 kpa ir, No-corrosive gas, Non-flammable gas to VDC ±%, Ripple (p-p) % or less (With power supply polarity protection) 5 m or less nalog output to 5 V (Within rated pressure range), Output impedance: pprox. kω ±% F.S. or less (PSE5 = ±% F.S.) ±.% F.S. or less ±.% F.S. or less ±.8% F.S. or less IP Operating: to 5 C, Stored: to 7 C (No condensation or freezing) Operating/Stored: 5 to 85% RH (No condensation) VC, 5/6 Hz for minute between live parts and case 5 MΩ between live parts and case (at 5 VDC) ±% F.S. or less (based on 5 C) Note pc. Piping Specifications Model Port size Case Material Pressure sensing section Sensor cable With sensor cable Weight Without sensor cable M M5 M M5 Resin case: PBT Fitting: Stainless steel. g.7 g.9 g. g R R6 IM5 IM5H R/8 ø ø6 M5 female thread, M5 female thread, through type M5 plug-in reducer plug-in reducer through type (with mounting hole) Resin case: PBT Resin case: PBT PBT Fitting: C6BD Fitting: 66S-T5 Pressure sensor: Silicon, O-ring: NBR -wire oval cable (.5 mm ) 9. g. g.6 g. g. g 9.8 g.9 g. g.8 g.6 g FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 565

24 Series PSE5 Compact Pressure Sensor Dimensions PSE5- M M5 PSE5- R R6 With across flats 7 B M M5 B PSE5-M.8 PSE5-M5.5 B.5 PSE5-R PSE5-R6 ø ø6 B 8 Common dimensions PSE5-IM M5 PSE5- With across flats. : R /8 M5 PSE5-IM5H 8 M ø. 566

25 Low Diffential Pressure Sensor Series PSE55 Low Differential Pressure Sensor Series PSE55 Features Low differential pressure sensor For air or dry gases Measures ± kpa (. Psi) -5v or -m analogue output options Direct connection of mm ID tubing Typical applications, filter back pressure monitoring or fan output checking Mounting bracket available Integrated indicator light How to Order PSE55 Nil 8 Output specifications Voltage output type to 5 V Current output type to m Option (Connector) Nil None Connector for PSE pressure controller pc. C ccessories Description Bracket Connector for PSE Specifications Output specification Environmental resistance Temperature characteristics Port size Part no. ZS-- ZS-8-C ccuracy (mbient temperature of 5 C) Linearity Repeatability Indication light Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance Note With M x 5L ( pcs.) pc. Material of wetted parts Sensor cable With sensor cable Weight Without sensor cable Note) Can detect differential pressure from to kpa within the range of 5 to 5 kpa. Note ) Current output type cannot be connected to the Series PSE. Note ) The connector is unassembled in the factory but is included with the shipment. Model PSE55 PSE55-8 Rated differential pressure range to kpa Operating pressure range 5 to 5 kpa Note) Proof pressure 65 kpa pplicable fluid ir/non-corrosive gas/non-inflammable gas Power supply voltage to VDC ±%, Ripple (p-p) % or less (With power supply polarity protection) Current consumption 5 m or less nalogue output to 5 VDC (Within rated differential pressure range) Output impedance: pprox. kω nalogue output to mdc (Within rated differential pressure range) llowable load impedance: 5 Ω or less (at VDC) Ω or less (at VDC) ±% F.S. or less ±.5% F.S. or less ±.% F.S. or less Orange light is on (When energized) IP Operating: to 5 C, Stored: to 7 C (No freezing or condensation) Operating/Stored: 5 to 85% RH (No condensation) VC or more, 5/6 Hz for minute between live parts and case 5 MΩ or more between live parts and case (at 5 VDC) ±% F.S. or less (Based on 5 C) ø.8 (ø. in the end) resin piping (pplicable to I.D. ø air tubing) Resin pipe: Nylon, Piston area of sensor: Silicon -wire oval cable (.5 mm ) -wire oval cable (.5 mm ) 75 g 5 g FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 567

26 Series PSE55 Low Differential Pressure Sensor nalog Output to 5 VDC to mdc nalog output [V] 5 nalog output [m] Differential pressure [kpa] Differential pressure [kpa] Dimensions x ø.5 through 7 Indicator light ø.8 ø ø5.7. -M depth With bracket View ZS-- bracket 568

27 Pressure Sensor for General Fluids Series PSE56 Pressure Sensor For General Fluids Series PSE56 Features Remote sensor for fluids and wet air ll wetted parts stainless steel -5v or -m analogue output Choice of connection thread types Robust metal case IP65 splashproof construction vailable for positive and vacuum pressures Can be specified with connector for SMC display units How to Order Pressure sensing range Positive pressure ( to MPa) Vacuum ( to kpa) Compound pressure ( to kpa) Positive pressure ( to 5 kpa) PSE56 C Option (Connector) Nil C Connector for PSE or PSE displays pc. Without Port size R /8 (With M5 female thread) R / (With M5 female thread) URJ / B TSJ / Specifications Model Rated pressure range Proof pressure Model Fluid Power supply voltage Current consumption Output specification ccuracy (mbient temperature of 5 C) Linearity Repeatability Power supply voltage effect Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance Temperature characteristics Resistance Nil 8 Output specifications Voltage output type to 5 V Current output type to m PSE56 to MPa.5 MPa PSE56 to kpa 5 kpa Note ) Current output type cannot be connected to PSE or PSE. Note ) The connector is not connected to the cable and is supplied loose at the time of shipment. ccessories Description Connector for PSE Part no. ZS-8-C Note pc. Conforms to CE marking and UL (CS) standards. PSE56 PSE56 to kpa to 5 kpa 5 kpa 75 kpa PSE56- PSE56--8 Fluid, including gas, that will not corrode Stainlesss steel 6L to VDC ±%, Ripple (p-p) % or less (With power supply polarity protection) m or less nalog output to m (Within rated pressure range) nalog output to 5 V (Within rated pressure range) llowable load impedance: 5 Ω or less (at VDC) Output impedance: pprox. kω Ω or less (at VDC) ±% F.S. or less ±.5% F.S. or less ±.% F.S. or less ±.% F.S. or less IP65 Operating: to 6 C, Stored: to 7 C (No condensation or freezing) Operating/Stored: 5 to 85% RH (No condensation) 5 VC for minute between live parts and case 5 MΩ between live parts and case (at 5 VDC) ±% F.S. or less ( to 5 C, based on 5 C), ±% F.S. or less ( to 6 C, based on 5 C) FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 569

28 Series PSE56 Pressure Sensor for General Fluids Piping Specifications Model Port size Material Sensor cable With sensor cable Weight Without sensor cable B R /8 R / M5 M5 URJ / TSJ / Case: C6 + nickel plated, Piping port/pressure sensor: Stainless steel 6L PSE56-: Oil proof -wire heavy-duty vinyl cable with air tube (. mm ) PSE56--8: Oil proof -wire heavy-duty vinyl cable with air tube (. mm ) 9 g g g 8 g g g 9 g g Dimensions PSE B 5.5 ø ø ø5. 5 Part-C ir tube M5 The dimensions of Part C are common to all PSE56 models. PSE56- PSE56-B B B Model PSE56- PSE56- PSE56- PSE56-B B R /8 R / URJ / TSJ / 57

29 Controller Series PSE Controller Series PSE Features Display unit for remote sensors Red / Green dual colour display Two independent digital outputs Programmable response time and auto-setting function Optional analogue output or autoshift input Suitable for all SMC remote sensors with -5v output Power output for sensor to simplify wiring Can also display imperial units Panel mounting kit and brackets available, compact design to reduce panel sizes Keys can be locked to prevent accidental adjustment How to Order 5 Input/Output specifications NPN output + -5 V output NPN output + - m output NPN output + uto shift input PNP output + -5 V output PNP output + - m output PNP output + uto shift input L L PSE Power supply/output connection cable Power supply/ Output connection cable ZS-8- Note) The cable is unassembled in the factory, but is included with the shipment. L C C Sensor connector Sensor connector (e-con connector) ZS-8-C Note) The connector is unassembled in the factory, but is included with the shipment. ccessories Bracket ZS-8-B M x 5L Panel mount adapter Panel ZS-7-C M x 5L Bracket Panel mount adapter + Front protective cover Panel Front protective cover Panel mount adapter Mounting screw (M x 8L) (ccessory) ZS-7-D Panel mount adapter Mounting screw (M x 8L) (ccessory) FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 57

30 Series PSE Controller Specifications Model Set (differential) pressure range Pressure range Note ) Rated (differential) pressure range Power supply voltage Current consumption Sensor input Hysteresis Switch output Maximum load current Maximum load voltage Residual voltage Output protection Weight Resistance nalogue output No. of inputs Input protection Response time nti-chattering function Repeatability Voltage output Note ) ccuracy (To display value) (5 C) Current output Note ) ccuracy (To display value) (5 C) Display accuracy (mbient temperature of 5 C) Display Indicator light Note ) uto shift input Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance Temperature characteristics Connection Material With power supply/output connection cable Without power supply/output connection cable Conforms to CE marking and UL (CS) standards. PSE to kpa to kpa to kpa. to MPa 5 to 5 kpa. to kpa For compound pressure For vacuum For low pressure For positive pressure For low difference pressure to kpa to kpa to kpa to MPa to 5 kpa to kpa to VDC, Ripple (p-p) % or less (With power supply polarity protection) 5 m or less (Current consumption for sensor is not included.) to 5 VDC (Input impedance: MΩ) input With excess voltage protection (Up to 6. V) Hysterisis mode: Variable, Window comparator mode: Variable NPN or PNP open collector output: outputs 8 m VDC (at NPN output) V or less (With load current of 8 m) With short circuit protection ms or less Response time settings for anti-chattering function: ms, 6 ms, 6 ms, 8 ms ±.% F.S. or less Output voltage: to 5 V (Within rated pressure range (Differential pressure)), Output impedance: pprox. kω Linearity: ±.% F.S. (Not including sensor accuracy), Response speed: 5 ms or less ±.6% F.S. or less ±.% F.S. or less ±.5% F.S. or less Output current: to m (Within rated pressure range) Maximum load impedance: Ω (at VDC), 6 Ω (at VDC), Minimum load impedance: 5 Ω Linearity: ±.% F.S. (Not including sensor accuracy), Response time: 5 ms or less ±.% F.S. or less ±.5% F.S. or less ±.% F.S. or less ±.5% F.S. ±.5% F.S. ± digit or less ± digits or less Note ) Pressure range can be selected during initial setting. Note ) uto shift function is not available when analogue output option is selected. lso, analog output option is not available when auto shift function is selected. Note ) The following units can be selected: For vacuum & compound pressure: kpa kgf/cm bar psi mmhg inhg For positive pressure & low pressure: MPa kpa kgf/cm bar psi For low differential pressure: kpa mmho + / digit, 7 segment indicator, -color display (Red/Green), Sampling frequency: 5 times/sec OUT: Lights up when ON (Green), OUT: Lights up when ON (Red) Non-voltage input (Reed or Solid state), Low level input: 5 ms or more, Low level:. V or less IP Operating: to 5 C, Stored: to 6 C (No freezing or condensation) Operating/Stored: 5 to 85% RH (No condensation) VC for minute between live parts and case 5 MΩ or more between live parts and case (at 5 VDC Mega) ±.5% F.S. or less (Based on 5 C) Power supply/output connection: 5P connector, Sensor connection: P connector Front case: PBT, Rear case: PBT 85 g g nalog Output to 5VDC nalog output [V] 5 C nalog output [m] B Pressure D Differential pressure to mdc C B Pressure D Differential pressure Range Rated pressure range For vacuum to kpa For compound pressure kpa to kpa For positive to MPa pressure to 5 kpa Range For low differential pressure Rated differential pressure range kpa C B kpa kpa MPa 5 kpa to kpa kpa D 57

31 Controller Series PSE Dimensions ±. M depth Power supply/output connector Sensor connector Power supply/output connection cable (ZS-8-) Sensor connector DC (+) Brown 5 OUT Black OUT White nalog output or auto shift input Grey DC ( ) Blue m PIN no. Terminal DC (+) N.C. DC ( ) IN ( to 5 V) With bracket View With panel mount adapter ZS-8-B Bracket With panel mount adapter + Front protective cover Panel thickness.5 to 6 ZS-7-D Panel mount adapter + Front protective cover ZS-7-C Panel mount adapter FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 57

32 Series PSE Controller Dimensions Panel cutout dimensions Horizontal stacking mount of multiple units (n pcs.) Mount of single unit -. x n pcs. +.5 x (n pcs. ) Vertical stacking mount of multiple units (n pcs.) or more. x n pcs. +.5 x (n pcs. ) -. or more -. 57

33 Multi-Channel Controller Series PSE Multi-channel Controller Series PSE Features Channel display unit Monitors up to individual sensors 5 outputs plus autoshift input. pplicable to several sensor ranges Simpler to connect and use than four separate display units Saves space compared to four displays Can display metric or imperial units Sensors and power lead removable for easy installation How to Order PSE C ccessories Nil Panel mount Input/Output specifications NPN 5 outputs + uto shift input PNP 5 outputs + uto shift input Without panel mount/protective cover Option Sensor connector included ( pcs.) C Connector Note) Spare sensor connectors can be ordered under part number. 5-8-C ZS-6-B ZS-6-C ZS-6- Mounting screws (M x 8L) (ccessory) Waterproof seal Panel mount adapter (ccessory) Panel Front protective cover + Panel mount Front protective cover Waterproof seal (ccessory) Mounting screws (M x 8L) (ccessory) Panel mount adapter Panel Power supply/output connection cable (spare) ccessory: Power supply/output connection cable ( m) Included with the controller. Power supply/output connection cable (ZS-6-) 8 conversion adapter ZS-6-D This adapter is used to mount Series PSE on the panel fitting of Series PS. ZS-6- Spare front protective cover FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 575

34 Series PSE Multi-Channel Controller Specifications Output specification Power supply voltage Current consumption Model Power supply voltage for sensor Power supply current for sensor Note ) Sensor input Hysteresis Switch output Response time Repeatability Setting/Display accuracy Display No. of inputs Input protection Hysteresis mode Window comparator mode No. of outputs Maximum load current Maximum load voltage Residual voltage Output protection nti-chattering function Indication light uto shift input uto identification function Note ) Enclosure Resistance mbient temperature range mbient humidity range Temperature characteristics Connection Material Weight pplicable pressure sensor Regulating pressure range kpa MPa kgf/cm Set pressure bar resolution psi mmhg InHg PSE PSE NPN open collector PNP open collector to VDC ±%, Ripple (p-p) % or less (With power supply polarity protection) 55 m or less (Current consumption for sensor is not included.) [Power supply voltage].5 V m maximum ( m maximum for the total power supply current when sensors are input.) to 5 VDC (Input impedance: pprox. 8 kω) inputs With excess voltage protection (Up to 6. V) Variable -digit fixed 5 outputs (CH: outputs, CH to : output) 8 m VDC (With NPN) V or less (With load current of 8 m) With short circuit protection 5 ms or less With anti-chattering function, Response time selection: ms, 6 ms, 6 ms ±.% F.S. or less ±.5% F.S. ± digit or less (at ambient temperature of 5 ± C) For measured value display: -digit, 7-segment indicator, Display color: Yellow For channel display: -digit, 7-segment indicator, Display color: Red Red (Lights up when output is ON.) Non-voltage input (Reed or Solid state), Input ms or more, Independently controllable auto shift function ON/OFF With auto identification function Front face: IP65, Other: IP Operating: to 5 C, Stored: to 6 C (No freezing or condensation) Operating/Stored: 5 to 85% RH (No condensation) ±.5% F.S. or less based on 5 C Power supply/output connection: 8P connector, Sensor connection: P connector Enclosure: PBT; Display: Transparent nylon; Back rubber cover: CR pprox. 6 g (Power supply/output connecting cable not included) PSE5 (For high pressure) PSE5 (For vacuum) PSE5 (For low pressure) PSE5 (For compound pressure). to MPa to kpa to kpa to kpa Note ) If the Vcc and V side of the sensor input connector are short circuited, the inside of the controller will be damaged. Note ) uto identification function comes with Series PSE5 pressure sensor only. Other SMC series (PSE5 and PSE5) are not equipped with this function. 576

35 Multi-Channel Controller Series PSE Dimensions PSE & PSE. 7.5 Connector (option) 6.5 MPa kp a PSE MDE IN JPN ZZ 6.8 OUT OUT PRESSURE CH SET For connection with sensor connector(p) Sensor connector (P x ) PIN no. Terminal DC (+) N.C. DC ( ) IN ( to 5 V) For connection with power supply and output cable(8p) Power supply/output connector (8P) PIN no. Terminal DC (+) DC ( ) CH_OUT CH_OUT CH_OUT CH_OUT CH_OUT uto shift input Power supply/output connection cable (Included) Pin no. 8 Yellow : uto shift input 7 Green : CH_OUT 6 Red : CH_OUT 5 Grey : CH_OUT White : CH_OUT Black : CH_OUT Blue : DC ( ) Brown : DC (+) FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 577

36 Series PSE Multi-Channel Controller Dimensions Front protective cover + Panel mount 5 9. () 7. MPa kpa 6. OUT OUT PRESSURE SET CH Front protective cover Panel mount adapter Waterproof seal Panel 8 conversion adapter + Panel mount MPa kpa OUT OUT PRESSURE CH SET Waterproof seal 8 conversion adapter 55 or more 55 or more Panel Panel mount adapter Panel fitting dimension pplicable panel thickness:.5 to 8 mm 578

37 L ir Catch Sensor Series IS ir Catch Sensor Series IS Features Stable detection of objects occluding an orifice Used to detect presence or absence of a workpiece lso used to confirm workpieces are correctly positioned Unaffected by supply pressure variations Back pressure sensing detects underpressure and overpressure Integral pressure gauge and indicator lights djustable internal orifice with locking control Modular construction can be used individually or in a bank lso vailable Manifold type with control unit and centralised wiring. How to Order Single Sensor Units ir catch sensor IS G F E G H Detection distance. to.5 mm. to.5 mm How to Order Manifolds Control unit N Without control unit Electrical entry and supply port position PR Individual wiring with supply port on the right PL Individual wiring with supply port on the left Note) The supply port position is the one when the switch is viewed from the front. ccessory Part No. IIS Lead wire with connector (Individual wiring type) IS-8- IS-8-B Straight, 5 m Right angle, 5 m Piping specifications F G /8 Pressure gauge E MPa single notation. Z PSI single notation MPa E MPa single notation. Z PSI single notation MPa G MPa single notation. Round pressure P gauge MPa-PSI double notation MPa G MPa single notation. P MPa-PSI double notation MPa * Made to order. N Bracket IS-- PL Square embedded pressure gauge B 5 6 Stations station stations stations stations 5 stations 6 stations DIN rail mounting bracket IS-9- Output specifications 5 NPN output PNP output Electrical entry Straight Individual wiring Option Nil B D Ordering Example Individual wiring IN Left 6 PUL SE T Nil L Right angle Without bracket With bracket With mounting bracket for DIN rail * Made to order.... MPa. 9 Individual wiring air catch sensor IS-GEN With mounting screw pcs. Stations DIN rail mounting bracket IISNPL-D set ( station manifold part number) IS-GE set (ir catch sensor part number) FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 579

38 Series IS ir Catch Sensor How to Order DIN Rail IS Pressure Gauge for ir Catch Sensor Regulator Nil N R R When specifying more than one option, enter symbols first in numerical, then in alphabetical orders. Standard Specifications Model Port size Fluid Proof pressure Maximum operating pressure Set pressure range Gauge port size Note ) Relief pressure mbient and fluid temperature Construction Weight (kg) Pressure gauge. MPa Round Square embedded Note ) L Part no. IS-5- IS-5- IS-5- IS-5- IS-5-5 IS-5-6 IS-5-7 Square embedded pressure gauge Round pressure gauge GC S G6 Maximum Notation Notation pressure specifications specifications indication Nil MPa single notation Nil MPa single notation. MPa MPa-PSI P Note) P PSI single notation. MPa double notation L Port Solenoid Valve Individual wiring type IISP- IISP- IISP- IISP- IISP-5 IISP-6 F E VC7 5 S Option specification None Non-relieving Flow direction: Right to left R ir.5 MPa. MPa. to. MPa Set pressure +.5 MPa {at relief flow of. l/min(nr)} 5 to 6 C (No condensation) Relieving type.9 G6-- GC-S Note ) The type with square embedded pressure gauge does not have connection. Note ) With an O-ring ( pc.) and mounting screws ( pcs.) VC VC VC VC VDC VDC VC Standard Specifications Valve specifications Coil specifications Valve type Fluid Withstand pressure MPa Body material Seal material mbient temperature C Fluid temperature C Enclosure tmosphere Valve leakage cm /min (NR) Mounting orientation Rated voltage llowable voltage fluctuation Type of coil insulation Power consumption pparent power Maximum pressure indication. MPa. MPa DC Note ) C Voltage 5 Hz 6 Hz Connection thread Nil R /8 D pplicable models Note) For double notation of MPa and PSI, add -X at the end of part number. Example) G6-P--X Port size F G / Throttle Centralized wiring type IISS- IISS- IISS- IISS- IISS-5 IISS-6 F Direct operation poppet ir, Inert gas. l HNBR to 6 to 6 (No freezing) Dustproof and jetproof (Equivalent to IP65) Environment with no corrosive or explosive gas. or less Free / VDC, /// VC (5/6 Hz) % rated voltage B type VC: 6.5 W VC: 7.5 V Q CE marked Note ) Since the C specifications include a rectifying device, there is no difference between the apparent power required for starting and holding. Nil S B K Without throttle and manual lock With throttle With manual lock With manual lock and throttle 58

39 ir Catch Sensor Series IS Specifications Model Detection distance Fluid Operating pressure range Recommended detection nozzle Consumption flow rate l/min (NR) Supply pressure Power supply voltage Current consumption Switch Output 5 kpa kpa kpa Repeatability (Including temperature characteristics) Hysteresis Indicator light Environmental Resistance Port size Lead wire (Individual wiring type) Terminal block box (Centralized wiring type) Weight Maximum load current Maximum load voltage Residual voltage Output protection Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation voltage IS-G IS-G5 IS-H IS-H5. to.5 mm. to.5 mm Dry air (filtered to 5 µm) NPN open collector: one output to kpa ø.5 5 or less 8 or less or less PNP open collector: one output. mm or less (Detection distance range. to.5 mm, supply pressure to kpa) NPN open collector: one output 5 to kpa ø. or less 5 or less or less to VDC, Ripple (p-p) % or less (With power polarity protection) 5 m or less 8 m VDC (at NPN output).5 V or less (at 8 m) Yes PNP open collector: one output. mm or less (Detection distance range. to.5 mm, supply pressure to kpa). mm or less (Detection distance range. to.5 mm). mm or less (Detection distance range. to.5 mm) LED level meter with red, green (Set value < detection distance: red, Set value = detection distance: green, Set value > detection distance: green + green ) IP66 Operating: to 6 C, Stored: to 7 C (No condensation or no freezing) Operating/stored: 5 to 85%RH (No condensation) VC in 5/6 Hz for minute between external terminal and case MΩ or more between external terminal and case (measured with 5 VDC megaohm meter) F type: G /8 -core, oil resistant, cable (.6 mm ) with M, -pin pre-wired connector Front wiring (Electrical entry ø) Individual wiring type (body only): 5 g. Terminal box: 5 g, lead wire: 78 g, connecting bracket with sealing for additional station: g FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 58

40 Series IS ir Catch Sensor Dimensions: Individual Wiring Type With bracket Left Right Stations n 6(Max. 65) 5 7 Stations L L L M x 8 (With HW, SW) LED level meter End plate L 9 8 Detection port G /8 L L 8 5 Lead wire connector End plate R PUL L SE T PUL L SE T PUL L SE T... 9 Setting dial MPa. MPa. MPa. Bracket Plug L Pressure gauge SUP port G /8 6 6 With DIN rail Electrical entry dimensions Straight union. Right angle The direction of a right angle connector cannot be changed. 6 (Max. 65) LED level meter 9 Left 8 L L Right Stations n 8 5 Detection port G /8 Stations L L L L L5 Lead wire connector End plate L End plate R Plug Pressure gauge 6. PUL. L. S ET. MPa. PUL L S ET MPa. MPa. PUL DIN rail mounting bracket L L L5 L S ET 9 Setting dial DIN rail center 8 SUP port G /8 58

41 General Purpose Pressure Switch Series ISG Features ISG General Purpose Switch is widely used in machine tools, industrial machines, compressors, chemical plants, power plants, machinery for ships, and for automatic pressure control such as hydraulic, water, liquid and atmospheric pressure. General Purpose Pressure Switch Series ISG How to Order ISG Multipurpose pressure switch Enclosure Open type (Non-waterproof) Dripproof (Equivalent to IP) Operating pressure range. to. MPa.5 to.7 MPa. to. MPa 9 to kpa Specifications Port size R /8 N NPT /8 Material Copper alloy Stainless steel 6 B Q Hysteresis scale plate None Hysteresis scale plate Note) Not available for ISG 9/9 type Contacts/Bulb gland - B C Type a (Standard) Type b Type c Model Open type (Non-waterproof) Dripproof ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- ISG- Operating pressure range (MPa) Hysteresis adjusting range (MPa) Proof pressure (MPa) Repeatability (MPa). to.. to.. ±.6. to.5. to.5.5 to.7.5 ±.. to.5. to.5. to.. to.6. to..5 ±.. to. Body material in contact with fluid material Hysteresis scale plate Electrical entry Brass, Phosphor bronze Brass, Phosphor bronze Stainless steel 6 Stainless steel 6 Brass, Phosphor bronze Brass, Phosphor bronze Stainless steel 6 Stainless steel 6 Brass, Phosphor bronze Brass, Phosphor bronze Stainless steel 6 None Yes None Yes None Yes None Yes None Yes None (Open type) Grommet (Dripproof) JIS F 88 Cable gland Type a b c Symbol ISG- ISG-. to.6 Stainless steel 6 Yes ISG9- ISG9- ISG9- ISG9- to kpa 7 to 5 kpa.5 ± kpa Brass, Phosphor bronze Stainless steel 6 None None mbient and fluid temp.: 5 to 8 C (No freezing), Port size: R /8, Weight:. kg (Open type),.5 kg (Dripproof) Option Fluid Type of operating fluid is limited by the material of the wetted parts. Body material in contact with fluid material Fluid Bellows Fluid entering part Non corrosive water/ir/liquid/inert gas Fluids which do not corrode stainless steel 6 e.g. steam (5 C or less) mbient temperature: 8 C or less. Phosphor bronze Stainless steel 6 Brass Stainless steel 6 FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 58

42 Series ISG General Purpose Pressure Switch Dimensions Open type ISG to 9- (Without hysteresis scale plate) ISG to - (With hysteresis scale plate) Hysteresis adjusting bolt Setting pressure adjusting bolt Hysteresis adjusting bolt Setting pressure adjusting bolt. -ø ø R /8 6 R /8 6 Dripproof type ISG to 9- (Without hysteresis scale plate) ISG to - (With hysteresis scale plate) Hysteresis adjusting bolt Setting pressure adjusting bolt R / ø Hysteresis adjusting bolt Setting pressure adjusting bolt R / ø JIS F 88 type a Cable gland JIS F 88 type a Cable gland 58

43 S S S S S S S S -Colour Display Digital Flow Switch Series PFM Features For air, N, R and CO. digital flow switch that uses MEMS sensor for detecting the flow. Compact size, light weight. Improved visibility with -colour display indication. Two piping directions are possible. Integrated flow adjustment valve. Multiple mounting combinations. -Colour Display Digital Flow Switch Series PFM Flow range Integrated type Remote type Measurement flow range (l/min). to (. to 5).5 to 5 (.5 to.5) to 5 ( to 5) to ( to 5) Model PFM7 PFM75 PFM75 PFM7 Sensor unit PFM5 PFM55 PFM55 PFM5 Model Display unit PFM ( ): Fluid: CO Piping variations Without flow adjustment With flow adjustment IN One-touch fitting: ø, ø6, ø8 Straight Bottom IN IN IN IN Female thread: G /8, / Straight Bottom IN IN IN Mounting Bottom mounting Bracket Panel mount Through-hole mounting DIN rail FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 585

44 Series PFM -Colour Display Digital Flow Switch How to order PFM7 Integrated display PFM 7 C Symbol 7 Type Integrated display Rated flow range (Flow rate range) F F C C6 C to (5) l/min.5 to 5 (.5) l/min to 5 (5) l/min to (5) l/min Note) Fluid: CO Flow adjustment valve - None S Yes Description G/8 G/ ø (5/") one-touch fitting ø6 one-touch fitting ø8 (5/6") one-touch fitting Port size Flow rate range 5 5 Output specification B C D E F G H NPN outputs PNP outputs NPN output + nalogue ( to 5 V) NPN output + nalogue ( to m) PNP output + nalogue ( to 5 V) PNP output + nalogue ( to m) NPN output + External input Note ) PNP output + External input Note ) Note ) User can select from accumulated value external reset, auto-shift and auto-shift zero. Piping entry direction - L Straight Bottom Note) Different combinations of piping entry directions for IN and OUT side are available as made-to-order. How to order PFM5 Remote sensor unit 5 PFM 5 C Type Remote sensor unit Rated flow range (Flow rate range) Symbol F F C C6 C to (5) l/min.5 to 5 (.5) l/min to 5 (5) l/min to (5) l/min Note) Fluid: CO Flow adjustment valve - None S Yes Description G/8 G/ ø (5/") one-touch fitting ø6 one-touch fitting ø8 (5/6") one-touch fitting Port size Flow rate range 5 5 No. Output specification Description nalogue output ( to 5 V) nalogue output ( to m) Piping entry direction - L Straight Bottom Note) Different combinations of piping entry directions for IN and OUT side are available as made-to-order. pplicable display unit PFM PFM 586

45 S -Colour Display Digital Flow Switch Series PFM How to order PFM Flow Sensor Monitor Symbol Content Voltage input Current input Option / Part No. Description 5 Power supply / Output connector ( m) Bracket Sensor connector Panel mount adapter Panel mount adapter + Front protective cover PFM Type Remote display unit Input specification pplicable remote type sensor unit PFM5(S)--- PFM5(S)--- Output specification NPN outputs + to 5 V output NPN outputs + to m output NPN outputs + External input Note) PNP outputs + to 5 V output PNP outputs + to m output PNP outputs + External input Note) Note) User can select from accumulated value external reset, auto-shift and auto-shift zero. Part no. ZS-8- ZS-8-B ZS-8-C- ZS-7-C ZS-7-D Note With M x 5 l ( pcs.) pc. With M x 8 l ( pcs.) With M x 8 l ( pcs.) Optional part numbers for PFM7 and PFM5 L Option - None Power supply / Output connector L Option - None With sensor connector F Note) Cable is not connected, but shipped together. Sensor connector (e-con connector) ZS-8-C- Note) Connector is not connected, but shipped together. Power supply / Output connector ZS-8- Part No. Description ZS--D Lead wire with connector (m) ZS--F ZS--D ZS--F ZS--M ZS--MS Lead wire with connector (m) + Rubber cover for connector (Silicon rubber) Bracket (for without flow adjustment valve) Bracket (for with flow adjustment valve) IN Lead wire length m Mounting screw (accessory) Mounting screw (accessory) Piping direction: Cannot be mounted with bottom piping type. Panel mount adapter ZS--J Panel mount adapter (for without flow adjustment valve) Panel mount adapter B Panel Mounting bracket Panel mount adapter ZS--JS Panel mount adapter (for with flow adjustment valve) Panel mount adapter B Panel Mounting bracket FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 587

46 Series PFM -Colour Display Digital Flow Switch Specifications PFM7 Model PFM7 PFM75 PFM75 PFM7 pplicable fluid Dry air, N, r, CO (ir quality grade is ISO857.-,. to.6..) Minimum unit setting Note ) ccumulated pulse flow rate exchange value. l/min. l/pulse. l/min. l/pulse. l/min. l/pulse. l/min l/pulse Real-time flow rate l/min, CFM x - Indication unit Note ) Linearity Repeatability Pressure characteristics Temperature characteristics ccumulated flow l, ft x - Display accuracy: ±%F.S. or less (Fluid: Dry air) nalogue output accuracy: ±5%F.S. or less ±%F.S. or less (Fluid: Dry air) nalogue output accuracy: ±%F.S. or less ±5%F.S. or less (based on.5 MPa) ±%F.S. (5 to 5 C) ±5%F.S. ( to 5 C) Operating pressure range Rated pressure range Proof pressure ccumulated flow range Switch output Maximum load current Maximum applied voltage kpa to 75 kpa 7 kpa to 75 kpa MPa Max l Note ) NPN or PNP open collector output 8 m 8 VDC (at NPN output) Internal voltage drop NPN output: V or less (at 8 m) PNP output:.5 V or less (at 8 m) Response time Output protection ccumulated pulse output Response time s (5 ms,.5 s, s can be selected.) Short-circuit protection, Overcurrent protection NPN or PNP open collector output (Same as switch output).5 s or less (9% response) Voltage output: to 5 V Voltage output nalogue output Note ) Output impedance: kω Current output Current output: to m Max. load impedance: 6 Ω, Min. load impedance: 5 Ω Hysteresis Note 5) External input Hysteresis mode Window comparator mode Variable Variable No-voltage input (Reed or Solid state) Input ms or more Display method -digit, 7-segment LED -colour display (Red/Green) Renewed cycle: times/sec Status LED s Power supply voltage Current consumption OUT: Illuminates when output is turned ON (Green). OUT: Illuminates when output is turned ON (Red). VDC ± % 55 m or less Environmental resistance Enclosure Operating fluid temperature IP to 5 C (with no freezing and condensation) Note ) User can select between. l/min and. l/min for the PFM7, and between. l/min and l/min for the PFM7 respectively. If the indication unit is selected to CFM, the minimum unit setting cannot be changed. t the time of shipment from the factory, the minimum unit setting is set to. l/min for the PFM7 and l/min for the PFM7 respectively. Note ) Set to NR at the time of shipment from the factory. NR is used for standard conditions: C, atm and 65%R.H. Nl/min is used for normal conditions: C and atm. When equipped with a unit switching function. (The SI unit (l/min or l) is fixed for types with no unit switching function.) Note ) Cleared when the power supply is turned off. Hold function can be selected. (Interval of min or 5 min can be selected). If the 5 min interval is selected, the life of the memory element (electronic part) is limited to million cycles. (If energised for hours, life is calculated as 5 min x million = 5 million min = 9.5 years). Therefore, if using the hold function, calculate the memory life for your operating conditions, and use within this life. Note ) Set to.5 s (9%), can be changed to ms. Note 5) Set to hystresis mode at the time of shipment from the factory. Can be changed to window comparator mode using push-buttons. 588

47 -Colour Display Digital Flow Switch Series PFM Specifications PFM5 Model PFM5 PFM55 PFM55 PFM5 pplicable fluid ccuracy Repeatability Pressure characteristics Temperature characteristics Dry air, N, r, CO (ir quality grade is ISO857.-,. to.6..) ±%F.S. or less ±%F.S. or less (Fluid: Dry air) ±5%F.S. or less (based on.5 MPa) ±%F.S. (5 to 5 C) ±5%F.S. ( to 5 C) Operating pressure range Rated pressure range Proof pressure Response time kpa to 75 kpa 7 kpa to 75 kpa MPa 5 msec or s (with response time selection function: s at no-voltage input) Refer to the internal circuits and wiring examples on page 6. nalogue output Voltage output: to 5 V Voltage output Output impedance: kω Current output Current output: to m Max. load impedance: 6 Ω, Min. load impedance: 5 Ω Status LED s Power ON indicator: Lights when power is turned on (Green). Flow rate indicator: Flashes when flow is applied (Green). Power supply voltage Current consumption VDC ± % 5 m or less Environmental resistance Enclosure Operating fluid temperature IP to 5 C (with no freezing and condensation) Note: Flow rate unit is based on standard conditions ( C, atm, 65% RH). Specifications PFM Model Note ) Dry air, N, r Displayed flow range CO Minimum unit setting ccumulated pulse flow rate exchange value Indication unit ccumulated flow range Power supply voltage Current consumption Sensor input Number of inputs: Hysteresis Switch output ccumulated pulse output Response time Repeatability nalogue output Display accuracy Display method Status LED s External input Enclosure Operating temperature range Weight PFM. to.5 l/min.5 to 6. l/min to 5.5 l/min to 5 l/min. to 5. l/min.5 to. l/min to 6. l/min to 5 l/min. l/min. l/min. l/min. l/min. l/pulse. l/pulse. l/pulse l/pulse Real-time flow rate l/min, CFM x - ccumulated flow l, ft x l VDC (ripple ± % or less) (With polarity protection) 5 m or less PFM: Voltage input to 5 VDC (input impedance: MΩ) PFM: Current input to mdc (input impedance: 5 Ω) Hysteresis mode: Variable, Window comparator mode: Variable NPN or PNP open collector output: outputs Maximum load current: 8 m, max. load voltage VDC (at NPN output), Residual voltage V or less (at load current 8 m), With short-circuit protection NPN or PNP open collector output (Same as switch output) s (5 ms,.5 s, s can be selected.) ±.%F.S. or less, nalogue output accuracy: ±.%F.S. or less Voltage output: to 5 VDC ( l/min to max. rated flow rate value) Output impedance: pprox. kω, ccuracy: ±%F.S. or less (relative to display value) Current output: to mdc ( l/min to max. rated flow rate value) Max. load impedance: 6 Ω (at VDC), Min. load impedance: 5 Ω ccuracy: ±%F.S. or less (relative to display value) ±.5%F.S. ± digit or less +/-digit, 7-segment LED -color display (Red/Green) Sampling cycle: times/sec OUT: Illuminates when output is turned ON (Green). OUT: Illuminates when output is turned ON (Red). No-voltage input (Reed or Solid state), LOW level input msec or more, LOW level. V or less IP Operating: to 5 C Stored: to 6 C (with no freezing and condensation) g (Without cable) 85 g (With cable) FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 589

48 Series PFM -Colour Display Digital Flow Switch Dimensions PFM7 PFM7-C/C6/C8 8 One-touch fitting pplicable tube O.D. (mm) B 8 x.6 depth 5 OUT OUT ø (5/") ø6 ø8 (5/6") ø/ DC ( ) DC (+) (.) IN OUT IN 8 x one-touch fitting x. 8 8 PFM7S-C/C6/C8 (.) OUT DC ( ) OUT DC (+) IN 8 x B 76 x one-touch fitting (Max. 58.5) 8 x.6 depth 5. IN 8 OUT 59

49 -Colour Display Digital Flow Switch Series PFM Dimensions Panel mount / Without flow adjustment valve / Straight.5 IN 58 OUT Panel thickness to With bracket / Without flow adjustment valve DIN rail mounting 5. IN IN IN x. 8 8 x n pcs FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 59

50 Series PFM -Colour Display Digital Flow Switch Dimensions PFM5 PFM5-C/C6/C8 (mm) 8 One-touch fitting pplicable tube O.D. B 8 ø (5/") ø6 ø8 (5/6") ø/ x.6 depth 5. OUT DC ( ) OUT DC (+) (.) IN OUT IN 8 x one-touch fitting x. 8 8 FLOW SENSOR POWER FLOW PFM5S-C/C6/C8 (.) 8 x.6 depth 5. IN 8 OUT 5.5 (Max.58.5) OUT DC ( ) OUT DC (+) IN x. 8 x one-touch fitting 58 8 B 76 8 FLOW SENSOR POWER FLOW 59

51 -Colour Display Digital Flow Switch Series PFM Dimensions Panel mount / Without flow adjustment valve / Straight.5 IN OUT Panel thickness to FLOW SENSOR POWER FLOW With bracket / Without flow adjustment valve DIN rail mounting IN IN IN FLOW SENSOR POWER FLOW x. 8 8 x n pcs FLOW SENSOR POWER FLOW FLOW SENSOR POWER FLOW FLOW SENSOR POWER FLOW FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 59

52 Series PFM -Colour Display Digital Flow Switch Dimensions PFM ±. x M x.5 Thread depth Power supply / Output connector Sensor connector With bracket With panel mount adapter 7.5 Bracket 5 View 8.75 Panel thickness dimension:.5 to 6 Panel mount adapter 59

53 -Colour Display Digital Flow Switch Series PFM Dimensions PFM Panel fitting dimensions Secure mounting of n ( or more) switches (horizontal) pc. or more. x n pcs. +.5 x (n pcs. ).. x R or less x R or less Secure mounting of n ( or more) switches (vertical) or more. x n pcs. +.5 x (n pcs. ) x R or less Note) If a bend (R) is used, limit it to R or less. FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 595

54 Series PFMV -Colour Display Digital Flow Switch Flow Sensor and Voltage Monitor Series PFMV Features Precise suction confirmation of very small workpieces. Sensor and monitor separation for remote centralitation. Non-linear voltage flow sensor output. Fast response. Reduced piping space. Support for both vertifcal and hirizontal secure mounting. Small and light. full range of sensors can be covered by one monitor. Sensor Series PFMV5 Voltage Monitor Series PFMV How to order PFMV5 PFMV5 5 Measurement flow range 5. to.5 l/min. to. l/min. to. l/min 5F.5 to.5 l/min F. to. l/min F. to. l/min Option/Part No. Part no. ZS-6- ZS-6- ZS-6- ZS-6- ZS-6-5 Stations For station (for single unit) For stations For stations For stations For 5 stations Remarks L-type brackets, mounting screws M x 5L L-type brackets, mounting screws M x 5L L-type brackets, mounting screws M x 5L L-type brackets, mounting screws M x 5L L-type brackets, mounting screws M x 55L Output specification nalogue output ( to 5 V) How to order PFMV PFMV M Type Remote display unit Input specification Symbol Content pplicable remote type sensor unit Voltage input PFMV5(F)-- Option/Part No. ZS-8- Power supply / Output connector (mm) Power supply / Output connector ZS-8- M x 5 l M x 5 l Bracket ZS-8-B Bracket With M x 5l (pcs.) ZS-8-C Sensor connector pc. Sensor connector (e-con connector) ZS-8-C 5 Output specification NPN outputs + to 5 V output NPN outputs + to m output NPN outputs + uto-shift input PNP outputs + to 5 V output PNP outputs + to m output PNP outputs + uto-shift input Panel Panel mount adapter ZS-7-C Panel mount adapter With M x 8l (pcs.) Mounting screw (M x 8 l) Panel Front protective cover Panel mount adapter ZS-7-D Panel mount adapter + front protective cover With M x 8l (pcs.) Mounting screw (M x 8 l) 596

55 -Colour Display Digital Flow Switch Series PFMV Specifications PFMV5 Model PFMV55 PFMV5 PFMV5 PFMV55F PFMV5F PFMV5F pplicable fluid Rated flow range (Flow rate range) Repeatability Pressure characteristics (Based on kpa) Temperature characteristics (Based on 5 C) Rated pressure range Operating pressure range Proof pressure nalogue output (Non-linear output) Response time Power supply voltage Current consumption Environmental resistance Lead wire Enclosure Fluid temperature Operating temperature range Withstand voltage Insulation resistance Port size Wetted parts material to.5 l/min to l/min Dry air, N (ISO to..6: ) ± F.S. or less Note) ±% F.S. or less ( to kpa) ±5% F.S. or less ( 7 to kpa) ±% F.S. or less (5 to 5 C) ±5% F.S. or less ( to 5 C) 7 kpa to kpa kpa to kpa 5 kpa Output voltage: to 5 V; output impedance: approx. kω 5 ms or less (9% response) to VDC ± %, Ripple (p-p) ± % or less (with polarity protection) 6 m or less IP to 5 C (with no freezing nor condensation) to 5 C (with no freezing nor condensation) VC for min. between whole charging part and case 5 MΩ or more (5 VDC Mega) between whole charging part and case M5 x.8 (Lightening torque: to.5 N m) PPS, Si, u, Stainless steel 6, C6 (electroless nickel plated) Vinyl cabtire cord, cores ø.6,.5 mm, m Weight g (excluding lead wire) Note ) nalogue output indicates V when the flow rate is. When the flow direction is from IN to OUT, the output is changed to 5 V, and when it s from OUT to IN, the output is changed to V. Specifications PFMV to l/min.5 to.5 l/min Note) to l/min Note) to l/min Note) Model pplicable sensor Displayable range Settable range Minimum unit setting Power supply voltage Current consumption Hysteresis Switch output Response time Repeatability nalogue output Display accuracy Display method Status LEDs External input (uto-shift input) Enclosure Operating temperature range Withstand voltage Temperature characteristics Material Weight Series PFMV Series PFMV55(F), PFMV5(F), PFMV5(F).7 to 5. V: The voltage under.7 V is displayed as LLL and that of 5. V or more is displayed as HHH..7 to 5. V. V to VDC (Ripple ± % or less) (with polarity protection) 5 m or less Hysteresis mode: Variable, Window comparator mode: Variable NPN or PNP open collector output: outputs Max. load current: 8 m; max. load voltage VDC (at NPN output), Residual voltage V or less (at load current 8 m), with short-circuit protection Switch output: ms ( ms, 5 ms,.5 s, s can be selected.) Note) ±.% F.S. or less, analogue output accuracy: ±.% F.S. or less Output voltage: to 5 VDC; output impedance: approx. kω Output current: to mdc; max. load impedance: 6 Ω (at VDC) Min. load impedance: 5 Ω; accuracy: ±% F.S. or less (relative to display value); response:. s (9% response or less) ±.5% F.S. ± digit or less +/-digit, 7-segment LED -color display (Red/Green) Updated cycle: times/sec OUT: Illuminates when output is turned ON (Green). OUT: Illuminates when output is turned ON (Red). No-voltage input (Reed or Solid state), LOW level input 5 msec or more, LOW level. V or less IP Operating: to 5 C; stored: to 6 C (with no freezing nor condensation) VC for min. between whole charging part and live part ±.5% F.S. or less (based on 5 C) Front and rear cases: PBT g (without cable); 85 g (with cable) Note) This is the response when the setting value is set to 9% to a to % of step input. FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 597

56 Series PFMV -Colour Display Digital Flow Switch PFMV5 x M5 x.8 x One-side bracket Both-side bracket L-type bracket (Tapped end) L-type bracket (Tapped end) ±. PFMV x M x.5 Thread depth L-type bracket (Through hole) Power supply / Output connector Sensor connector 598

57 -Colour Display Digital Flow Switch Series PFMV With bracket Bracket 5 View With panel mount adapter.5 7 With panel mount adapter + front protective cover..5 Panel thickness dimension:.5 to Panel mount adapter Panel fitting dimensions Secure mounting of n pcs. ( or more) switches (Horizontal) Panel mount adapter + front protective cover Secure mounting of n pcs. ( or more) switches (Vertical) or more.. pc.. x R or less or more. x n pcs. +.5 x (n pcs. ) x R or less x n pcs. +.5 x (n pcs. ) FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION x R or less 599

58 Series PF Digital Flow Switch for ir Digital Flow Switch For ir Series PF Features Flow switch for air. Thermal detection has no moving parts and very little resistance to airflow. Flow ranges from to 5 l/min. Integrated LED display can show metric or imperial units. Two independent digital outputs. Output modes instantaneous flow, accumulated flow and counting pulse. IP65 splashproof construction. Display can be rotated for ease of viewing. How to Order Integrated display type 5 5 PF7 F 7 Flow rate range to l/min 5 to 5 l/min to l/min to l/min 5 to 5 l/min Thread type F G Symbol 7 67 Port size Port Symbol size /8 / /8 / Output specifications Output specifications 5 NPN open collector outputs PNP open collector outputs Flow rate (l/min) pplicable model 5 (Integrated display type) PF7, PF75 PF7, PF7 PF75 pplicable model PF7, PF75 PF7, PF7, PF75 PF7, PF75 PF7, PF7/PF75 Specifications Model Measured fluid Flow rate measurement range Set flow rate range Flow rate measuring range Minimum set unit ccumulated pulse flow rate exchange value (Pulse width: 5 ms) Note ) Real-time flow rate Display unit ccumulated flow Operating fluid temperature Linearity Repeatability Temperature characteristics Current consumption (No load) Weight Note ) Port size ( NPT, G) Detection type Display Operating pressure range Proof pressure ccumulated flow range Resistance Output Note ) specifications Switch output ccumulated pulse output Indicator light Response time Hysteresis Power supply voltage Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance PF7 PF75 PF7 PF7 PF75 ir, Nitrogen.5 to.5 l/min.5 to.5l /min to l/min. l/min. l/pulse.5 to 5.5 l/min.5 to 5.5 l/min 5 to 5 l/min.5 l/min.5 l/pulse 5 to 5 l/min 5 to 5 l/min to l/min l/min l/pulse to l/min to l/min to l/min l/min l/pulse l/min, CFM x l/min, CFM x l, ft x to 5 C ±5% F.S. or less ±% F.S. or less ±% F.S. or less 5 to 55 l/min 5 to 55 l/min 5 to 5 l/min 5 l/min 5 l/pulse ±% F.S. or less (5 to 5 C, based on 5 C), ±5% F.S. or less ( to 5 C, based on 5 C) 5 m or less 6 m or less 7 m or less 5 g 9 g /8, / /8 / Heater type -digit, 7-segment LED 5 kpa to.5 MPa 5 kpa to.75 MPa. MPa to l Maximum load current: 8 m; Internal voltage drop: V or less (With load current of 8 m) NPN open collector Maximum applied voltage: V; Two outputs Maximum load current: 8 m PNP open collector Internal voltage drop:.5 V or less (With load current of 8 m); Two outputs NPN or PNP open collector (same as switch output) Lights up when output is ON OUT: Green; OUT: Red sec. or less Hysteresis mode: Variable (can be set from ), Window comparator mode: -digit fixed Note 5) to VDC (Ripple ±% or less) IP65 Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns Note ) Flow rate display can be switched between the basic condition of C,. kpa and the standard condition (NR) of C,. kpa, and 65% RH. Note ) Without lead wire. Note ) Switch output and accumulated pulse output can be selected during initial setting. Note ) Window comparator mode Since hysteresis will reach digits, keep P_ and P_ or n_ and n_ apart by 7 digits or more. (In case of output OUT, n_, to be n_, and P_, to be P_,.) 6

59 Digital Flow Switch for ir Series PF Dimensions: Integrated Display Type for ir PF7/75 (.5) -ø. Flow direction FLOW SWITCH UP 5 OUT FOR IR OUT SET DOWN -Port size -ø.5 5 PF7/7/75 7 (.5) Connector pin numbers 6 Flow direction Pin no. Pin description DC (+) OUT DC ( ) OUT FLOW SWITCH U P 5 SET OUT OUT FOR IR DOWN -Port size ø.5 5 FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 6

60 Series PF Digital Flow Switch for ir Digital Flow Switch For ir Series PF Features Flow switch for air Thermal detection has no moving parts Very little resistance to airflow Flow ranges from to 5 l/min Output for remote display, optional analogue output IP65 splashproof construction (Remote display sensor unit) How to Order Remote type Display unit Flow rate range 5 5 PF5 F to l/min 5 to 5 l/min to l/min to l/min 5 to 5 l/min Thread type F G Port size Port Symbol size /8 / /8 / 5 Output specifications Nil Flow rate (l/min) 5 Output for display unit Output for display unit + analog output ( to 5 V) Output for display unit + analog output ( to m) pplicable model PF5/55 PF5/5 PF55 Specifications Model Measured fluid Detection type Flow rate measuring range Operating pressure range Proof pressure Operating fluid temperature Linearity Note ) Repeatability Note ) Temperature characteristics Output for display unit Output Note ) specifications nalog output PF5 PF55 PF5 PF5 PF55 to l/min 5 to 5 l/min ir, Nitrogen Heater type to l/min to l/min 5 to 5 l/min 5 kpa to.5 MPa 5 kpa to.75 MPa. MPa to 5 C ±5% F.S. or less ±% F.S. or less ±% F.S. or less (5 to 5 C, based on 5 C) ±% F.S. or less ( to 5 C, based on 5 C) nalogue voltage output (Non-linear) output impedance kω output for display unit PF Voltage output to 5 V within the flow rate range Linearity: ±5% F.S. or less; allowable load resistance: kω or more. Current output to m within the flow rate range Linearity: ±5% F.S. or less; allowable load resistance: Ω or less with VDC, 6Ω or less with VDC Power supply voltage Current consumption (No load) Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance Resistance Weight Note ) Port size (G) to VDC (Ripple ±% or less) m or less m or less IP65 Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns g g /8, / /8 / Note ) The system accuracy when combined with PF. Note ) Output system can be selected during initial setting. Note ) Without lead wire. (dd g for the types of analog output whether voltage or current output selected.) Note ) Flow rate unit measured under the following conditions: C and. kpa. 6

61 Digital Flow Switch for ir Series PF Dimensions: Remote Type Sensor Unit for ir PF5/55 Output specifications Pulse output only Pulse output + nalog output 5 (mm) B 6 7 B (.5) -ø. Flow direction -Port size -ø.5 5 PF5/5/55 Output specifications Pulse output only 8 Pulse output + nalog output 58 (mm) B 6 7 (.5) Wiring Main circuit Brown () DC (+) Black () OUT White () NC/nalog output Blue () DC ( ) Use this sensor by connecting to SMC remote type display unit Series PF. B Flow direction 6 Connector pin numbers -Port size 5 -ø.5 5 Pin no. Pin description DC (+) NC/nalog output DC ( ) OUT FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 6

62 Series PF Digital Flow Switch for ir Digital Flow Switch For ir Series PF Features Displays flow information Works with remote sensor units Panel mounting construction Clear LED indication Two independent digital outputs Output modes instantaneous flow, total flow and counting pulse Integrated LED display can show metric or imperial units How to Order Specifications Remote type Display unit Symbol PF Flow rate range Flow rate range Type for sensor unit to l/min 5 to 5 l/min to l/min to l/min 5 to 5 l/min PF5 PF55 PF5 PF5 PF55 Output specifications Symbol Output specifications NPN open collector outputs PNP open collector outputs Mounting Panel mounting pplicable model PF/ PF/ Model PF/ PF/ Flow rate measurement range Note ).5 to.5 l/min.5 to 5.5 l/min 5 to 5 l/min to l/min 5 to 55 l/min Set flow rate range Note ).5 to.5 l/min.5 to 5.5 l/min 5 to 5 l/min to l/min 5 to 55 l/min Minimum set unit Note ). l/min.5 l/min l/min l/min 5 l/min ccumulated pulse flow rate exchange value (Pluse width: 5 ms) Note ). l/pulse.5 l/pulse l/pulse l/pulse 5 l/pulse Note ) Real-time flow rate Display unit ccumulated flow ccumulated flow range Linearity Note ) Repeatability Note ) Current consumption Weight Switch output ccumulated pulse output Display Indicator light Power supply voltage Response time Hysteresis Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance Resistance Temperature characteristics Output Note ) specifications l/min, CFM x l/min, CFM x l, ft x to l ±5% F.S. or less ±% F.S. or less ±% F.S. or less (5 to 5 C based on 5 C) ±% F.S. or less ( to 5 C based on 5 C) 5 m or less 6 m or less 5 g Maximum load current: 8 m Internal voltage drop: V or less (With load current of 8 m) NPN open collector (PF, PF) Maximum applied voltage: V outputs Maximum load current: 8 m PNP open collector (PF, PF) Internal voltage drop:.5 V or less (With load current of 8 m) outputs NPN or PNP open collector (same as switch output) -digit, 7-segment LED Lights up when output is ON OUT: Green; OUT: Red to VDC (Ripple ±% or less) sec. or less Hysteresis mode: Variable (can be set from ), Window comparator mode: Fixed ( digits) Note 5) IP Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns Note ) The flow rate measurement range can be modified depending on the setting. Note ) Flow rate display can be switched between the basic condition of C,. kpa and the standard condition (NR) of C,. kpa, and 65% RH. Note ) The system accuracy when combined with PF5. Note ) Switch output and accumulated pulse output can be selected during initial setting. Note 5) Window comparator mode Since hysteresis will reach digits, keep P_ and P_ or n_ and n_ apart by 7 digits or more. (In case of output OUT, n_, to be n_, and P_, to be P_,.) 6

63 Digital Flow Switch for ir Series PF Dimensions: Remote Type Display Unit for ir PF- Panel mounting type Panel fitting dimensions x 7.(=.6) M The applicable panel thickness is to. mm. View...8 SMC FLOW SWITCH Terminal block number 5.8 UNIT RESET SET nalog output to 5 VDC nalog output [V] 5 to mdc nalog output [m] Min. measured flow rate value Max. measured flow rate value Real-time flow rate [l/min] Min. measured flow rate value Max. measured flow rate value Real-time flow rate [l/min] Basic condition Standard condition Basic condition Standard condition Part no. Minimum measured flow rate value [l/min] Minimum measured flow rate value [l/min] Part no. Minimum measured flow rate value [l/min] Minimum measured flow rate value [l/min] PF5-- PF55-- PF5-- PF5-- PF PF5-- PF55-- PF5-- PF5-- PF FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 65

64 Series PF Digital Flow Switch for ir Digital Flow Switch, Large Flow Type For ir Series PF Features High volume flow switch for air Thermal detection has no moving parts Very little resistance to airflow Flow ranges from 5 to l/min Integrated LED display can show metric or imperial units Digital and analogue outputs Digital output gives instantaneous flow, accumulated flow or counting pulse IP65 splashproof construction Display can be rotated for ease of viewing Port size How to Order Integrated display type Flow rate range 6 5 to l/min to 6 l/min 6 to l/min Specifications Model Measured fluid Detection type Flow rate measuring range Note ) Minimum setting unit Note ) Real-time flow rate Display unit ccumulated flow Operating pressure range Proof pressure Pressure loss ccumulated flow range Linearity Note ) Repeatability Pressure characteristics Temperature characteristics Output specifications Response time Hysteresis Power supply voltage Current consumption Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance Weight Port size Resistance PF7 H F 68 Switch output Note ) ccumulated Note ) pulse output nalogue output Note ) High flow type Port specifications F G PF7H 5 to l/min 5 l/min Symbol Port size / Output specifications Flow rate (l/min) 6 pplicable model PF7H PF76H PF7H NPN open collector output + nalog output ( to 5 V) NPN open collector output + nalog output ( to m) PNP open collector output + nalog output ( to 5 V) PNP open collector output + nalog output ( to m) Switching of switch output and accumulated pulse output is possible with NPN or PNP open collector outputs. PF76H Dry air Heater type to 6 l/min l/min PF7H 6 to l/min l/min, CFM l, m, m x, ft, ft x, ft x 6. to.5 MPa.5 MPa kpa (at maximum flow rate) to 9,999,999,999 l ±.5% F.S. or less (.7 MPa, at C) ±.% F.S. or less (.7 MPa, at C), ±.% of F.S. or less in case of analog output ±.5% F.S. or less (. to.5 MPa, based on.7 MPa) ±.% F.S. or less ( to 5 C, based on 5 C) NPN open collector Max. load current: 8 m; Max. applied voltage: V; Internal voltage drop: V or less (With load current of 8 m) PNP open collector Max. load current: 8 m; Internal voltage drop:.5 V or less (With load current of 8 m) Flow rate per pulse: l/pulse,. ft NPN or PNP open collector /pulse Pulse width: 5 msec Output voltage: to 5 V; Load impedance: kω or more Output current: to m; Load impedance: 5 Ω or less sec. or less Hysteresis mode: Variable (can be set from ); Window comparator mode: (can be set from to % F.S.) VDC (Ripple ±% or less) 5 m or less IP65 to 5 C (No condensation) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns. kg (Without lead wire). kg (Without lead wire). kg (Without lead wire) / Note ) Flow rate display can be switched between the basic condition of C,. kpa and the standard condition (NR) of C,. kpa, and 65% RH. Note ) The high flow rate type is CE marked; however, the linearity with applied noise is ±5% F.S. or less. Note ) Switch output and accumulated pulse output selections are made using the button controls. Note ) The analog output operates only for real-time flow rate, and does not operate for accumulated flow. 66

65 Digital Flow Switch for ir Series PF Dimensions PF7H/76H/7H Connector pin numbers -I thread with depth J H Pin no. Pin description DC (+) nalog output DC ( ) OUT (.5) D E F B U P SET MODE DOWN -G 6 C Model PF7H PF76H PF7H B 6 8 nalogue output to 5 VDC nalog output [V] 5 C 5 55 D 9 E F G H " 6 /" 6 " 56 I M5 x.8 M6 x M6 x J to mdc nalog output [m] Min. measured flow rate value Max. measured flow rate value Real-time flow rate [l/min] Min. measured flow rate value Max. measured flow rate value Real-time flow rate [l/min] Minimum measured Maximum measured Part no. flow rate value [l/min] flow rate value [l/min] PF7H--8 PF7H PF76H--8 PF76H--68 PF7H--8 PF7H Minimum measured Maximum measured Part no. flow rate value [l/min] flow rate value [l/min] PF7H--9 PF7H PF76H--9 PF76H--69 PF7H--9 PF7H FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 67

66 Series PFW Digital Flow Switch for Water Digital Flow Switch For Water Series PFW Features Flow switch for water Karmann vortex detection method No moving parts inside the unit Very little resistance to water flow Flow ranges from.5 to l/min Integrated LED display can show metric or imperial units Two independent digital outputs Output modes instantaneous flow, accumulated flow and counting pulse IP65 splashproof construction Display can be rotated for ease of viewing How to Order Specifications Integrated display type Flow rate range PFW7 F 7.5 to l/min to 6 l/min 5 to l/min to l/min Model Measured fluid Flow rate measurement range Set flow rate range Flow rate measuring range Minimum set unit ccumulated pulse flow rate exchange value (Pulse width: 5 ms) Linearity Repeatability Temperature characteristics Note ) Current consumption (No load) Weight Port size Detection type Display Real-time flow rate Display unit ccumulated flow Operating pressure range Proof pressure ccumulated flow range mbient temperature range Note ) Output specifications ccumulated pulse output Indicator light Response time Hysteresis Power supply voltage Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance Resistance Switch output Thread type F PFW7 G PFW7 Water Port size Port Symbol size 6 /8 / / PFW7 (Integrated display type) 6 Output specifications 7 67 Flow rate (l/min) Lights up when output is ON, OUT: Green; OUT: Red sec. or less Hysteresis mode: Variable (can be set from ), Window comparator mode: -digit fixed to VDC (Ripple ±% or less) IP65 to 5 C VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns NPN open collector outputs PNP open collector outputs PFW7 pplicable model PFW7, PFW7 PFW7, PFW7 PFW7, PFW7 PFW7.5 to.5 l/min.7 to 7. l/min.5 to 5 l/min 7 to l/min.5 to.5 l/min.7 to 7. l/min.5 to 5 l/min 7 to l/min.5 to l/min to 6 l/min 5 to l/min to l/min.5 l/min. l/min.5 l/min l/min.5 l/pulse. l/pulse.5 l/pulse l/pulse ±5% F.S. or less ±% F.S. or less ±% F.S. or less ±% F.S. or less ±5% F.S. or less ( to 5 C, based on 5 C) 7 m or less 8 m or less 6 g 5 g 7 g 5 g /8 /8, / /, / /, Karmann vortex -digit, 7-segment LED l/min, gal (US)/min l, gal (US) to MPa.5 MPa to l Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) Maximum load current: 8 m; Internal voltage drop: V or less (With load current of 8 m) NPN open collector Maximum applied voltage: V; outputs Maximum load current: 8 m PNP open collector Internal voltage drop:.5 V or less (With load current of 8 m); outputs NPN or PNP open collector (same as switch output) Note ) In the case of PFW7, ±% of F.S. or less (5 C to 5 C, based on 5 C). Note ) Switch output and accumulated pulse output can be selected during initial setting. Note ) Window comparator mode Since hysteresis will reach digits, keep P_ and P_ or n_ and n_ apart by 7 digits or more. The minimum setting unit is digit. (Refer to the table above.) (In case of output OUT, n_, to be n_, and P_, to be P_,.) Note ) 68

67 Digital Flow Switch for Water Series PFW Dimensions: Integrated Display Type for Water PFW7, PFW7 (.5) 7 -ø Flow direction L 6 FLOW SWITCH UP 5 SET OUT OUT FOR WTER DOWN Connector pin numbers -Port size -ø.5 5 PFW7 Model PFW7 PFW7 L dimension 6 7 Flow direction (.5) Pin no. Pin description DC (+) OUT DC ( ) OUT FLOW SWITCH U P 6 5 S E T 55 OUT OUT FOR WTER DOWN -Port size -ø.5 5 FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 69

68 Series PFW Digital Flow Switch for Water Dimensions: Integrated Display Type for Water PFW7 6 6 (.5) FLOW SWITCH U P 88 Flow direction SET 5 OUT OUT DOWN -Port size 5 -ø

69 Digital Flow Switch For Water Series PFW Features Flow switch for water Remote display type Karmann vortex detection method No moving parts inside the sensor Very little resistance to passage of water Units with flow ranges from.5 to l/min Digital Flow Switch for Water Series PFW Output for remote display, optional analogue output (Remote display sensor unit) IP65 splashproof construction How to Order Remote type Sensor unit Specifications PFW5 F Flow rate range.5 to l/min to 6 l/min 5 to l/min to l/min Thread type F G Output specifications Nil Output for display unit (sensor output) only Output for display unit + nalog output ( to 5V) Output for display unit + nalog output ( to m) Port size Symbol Port Flow rate (l/min) size 6 pplicable model /8 PFW5, PFW5 / PFW5, PFW5 6 / PFW5, PFW5 PFW5 Model Measured fluid Detection type Flow rate measuring range Operating pressure range Withstand pressure Operating fluid temperature Linearity Note ) Repeatability Note ) Temperature characteristics Output Note ) specifications Output for display unit nalog output PFW5 PFW5 PFW5 PFW5 Water Karmann vortex.5 to l/min to 6 l/min 5 to l/min to l/min to MPa.5 MPa to 5 C to 5 C ±5% F.S. or less ±% F.S. or less ±% F.S. or less ±% F.S. or less ±% F.S. or less (5 to 5 C based on 5 C), ±% F.S. or less ( to 5 C based on 5 C) Pulse output, N channel, open drain, output for display unit PFW. (Specifications: Maximum load current of m; Maximum applied voltage of V) Voltage output to 5V within the flow rate range Linearity: ±5% F.S. or less; allowable load resistance: kω or more. Current output to m within the flow rate range Linearity: ±5% F.S. or less; allowable load resistance: Ω or less with VDC, 6 Ω or less with VDC Power supply voltage to VDC (Ripple ±% or less) Current consumption (No load) m or less Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance IP65 Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns Weight Note ) g 7 g 65 g, g Port size (G) /8 /8, / /, / /, Note ) The system accuracy when combined with PFW. Note ) Output system can be selected during initial setting. Note ) Without lead wire. (dd g for the types of analog output whether voltage or current output selected.) Resistance FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 6

70 Series PFW Digital Flow Switch for Water Dimensions: Remote Type Sensor Unit for Water PFW5/5-(N)- (.5) Output specifications Pulse output only Pulse output + nalog output 5 B 6 7 -ø. Flow direction B.6 L Port size 6 -ø.5 5 PFW5-(N)- Output specifications Pulse output only Model PFW5 PFW5 Pulse output + nalog output 5 L dimension 6 B 6 7 (.5) Wiring Main circuit Brown () DC (+) Black () OUT White () NC/nalog output Blue () DC ( ) Flow direction Use this sensor by connecting to SMC remote type display unit Series PFW. B Connector pin numbers Port size 6 -ø.5 5 Pin no. Pin description DC (+) NC/nalog output DC ( ) OUT 6

71 Digital Flow Switch for Water Series PFW Dimensions: Remote Type Sensor Unit for Water PFW5-(N)- Output specifications Pulse output only 6 B 77 (.5) Pulse output + nalog output 7 87 B Flow direction -Port size 5 -ø5.5 6 nalog output to 5 VDC nalog output [V] 5 to mdc nalog output [m] Min. measured flow rate value Max. measured flow rate value Real-time flow rate [l/min] Min. measured flow rate value Max. measured flow rate value Real-time flow rate [l/min] Part no. PFW5-- PFW5-- PFW5-- PFW5-- Minimum measured flow rate value [l/min].5 5 Maximum measured flow rate value [l/min] 6 Part no. PFW5-- PFW5-- PFW5-- PFW5-- Minimum measured Maximum measured flow rate value [l/min] flow rate value [l/min] FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 6

72 Series PFW Digital Flow Switch for Water Digital Flow Switch For Water Series PFW Features Displays flow information Works with remote sensor units Panel mounting construction Clear LED indication and can display metric or imperial units Two independent digital outputs Output modes instantaneous flow, total flow and counting pulse How to Order Specifications Model Flow rate measurement range Note ) Set flow rate range Note ) Minimum setting unit Note ) ccumulated pulse flow rate exchange value (Pulse width: 5 ms) Note ) Real-time flow rate Display unit ccumulated flow ccumulated flow range Linearity Note ) Repeatability Note ) Temperature characteristics Current consumption (No load) Weight Resistance Output Note ) specifications Switch output ccumulated pulse output Enclosure Operating temperature range Withstand voltage Insulation resistance Vibration resistance Display Indicator light Power supply voltage Response time Hysteresis Remote type Display unit PFW Flow rate range Symbol Flow rate range Type for sensor unit.5 to l/min PFW5 to 6 l/min PFW5 5 to l/min PFW5 to l/mim PFW5.5 to.5 l/min.5 to.5 l/min.5 l/min.5 l/pulse PFW/.7 to 7. l/min.7 to 7. l/min. l/min. l/pulse Description Part no. Output specifications NPN open collector outputs PNP open collector outputs.5 to 5 l/min.5 to 5 l/min.5 l/min.5 l/pulse Mounting Panel mounting Panel mount adapter part no. Panel adapter B ZS-- PFW/ 7 to l/min 7 to l/min l/min l/pulse l/min, gal (US)/min l, gal (US) to l ±5% F.S. or less ±% F.S. or less ±% F.S. or less ±% F.S. or less ±% F.S. or less ( to 5 C, based on 5 C), ±% F.S. or less (5 to 5 C, based on 5 C) 5 m or less 6 m or less 5 g Maximum load current: 8 m Internal voltage drop: V or less (With load current of 8 m) NPN open collector (PFW, PFW) Maximum applied voltage: V outputs Maximum load current: 8 m PNP open collector (PFW, PFW) Internal voltage drop:.5 V or less (With load current of 8 m) outputs NPN or PNP open collector (Same as switch output) IP Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case to 5 Hz at whichever is smaller:.5 mm amplitude or 98 m/s acceleration in X, Y, Z directions for hrs. each -digit, 7-segment LED Lights up when output is ON, OUT: Green; OUT: Red to VDC (Ripple ±% or less) sec. or less Hysteresis mode: Variable (can be set from ) Window comparator mode: -digit fixed Note ) Note ) Values vary depending on each set flow rate range. Note ) The system accuracy when combined with PFW5. Note ) Switch output and accumulated pulse output can be selected during initial setting. Note ) Window comparator mode Since hysteresis (H) will reach digits, keep P_ and P_ or n_ and n_ apart by 7 digits or more. (In case of output OUT, n_, to be n_, and P_, to be P_,.) 6

73 Digital Flow Switch for Water Series PFW Dimensions: Remote Type Display Unit for Water PFW- Panel mounting type x 7. (=.6) 8-M The applicable panel thickness is to. mm. View...8 SMC FLOW SWITCH 5.8 UNIT RESET SET Panel fitting dimension Terminal block number FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 65

74 Series PFW Digital Flow Switch for Water Digital Flow Switch, High Temperature Fluid Type For Water Series PFW Features Flow switch for heated water up to 9 C Karmann vortex detection method No moving parts inside the unit and very little resistance to water flow Flow ranges from.5 to l/min Integrated LED display can show metric or imperial units One digital output plus analogue output Digital Output modes instantaneous flow, accumulated flow and counting pulse IP65 splashproof construction with all stainless body parts (Integrated display type) How to Order Integrated display type PFW7 T F 7 Output specifications 7 67 PNP open collector outputs NPN open collector outputs Flow rate range.5 to l/min to 6 l/min 5 to l/min Temperature range T to 9 C Thread type F G Port size Symbol Port Flow rate (l/min) size 6 pplicable model /8 PFW7T, PFW7T 6 / / PFW7T, PFW7T PFW7T Note ) Output specifications Specifications Model Measured fluid Flow rate measurement range Set flow rate range Flow rate measuring range Minimum setting unit ccumulated pulse flow rate exchange value (Pulse width: 5 ms) Operating fluid temperature Linearity Repeatability Temperature characteristics Note ) Current consumption (No load) Weight Port size Detection type Display Real-time flow rate Display unit ccumulated flow Operating pressure range Withstand pressure ccumulated flow range Switch output ccumulated pulse output Indicator light Response time Hysteresis Power supply voltage Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance Resistance PFW7T PFW7T PFW7T Water, Mixture of water (5%) and ethylene glycol (5%).5 to.5 l/min.7 to 7. l/min.5 to 5 l/min.5 to.5 l/min.7 to 7. l/min.5 to 5 l/min.5 to l/min to 6 l/min 5 to l/min.5 l/min. l/min.5 l/min.5 l/pulse. l/pulse.5 l/pulse to 9 C (With no cavitation) ±5% F.S. or less ±% F.S. or less ±5% F.S. or less ( to 9 C, based on 5 C) 7 m or less 7 g /8 /8, / /, / Karmann vortex -digit, 7-segment LED l/min, gal (US)/min l, gal (US) to MPa.5 MPa to l Maximum load current: 8 m; Internal voltage drop: NPN open collector V or less (With load current of 8 m) Maximum applied voltage: V; outputs PNP open collector Maximum load current: 8 m; Internal voltage drop:.5 V or less (With load current of 8 m); outputs NPN or PNP open collector (Same as switch output) Lights up when output is ON OUT: Green; OUT: Red sec. or less Hysteresis mode: Variable (can be set from ); Window comparator mode: -digit fixed to VDC (Ripple ±% or less) IP65 Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns Note ) ±5% F.S. or less ( to 5 C, based on 5 C), ±% F.S. or less (5 to 5 C, based on 5 C) Note ) Switch output and accumulated pulse output can be selected during initial setting. Note ) Window comparator mode Since hysteresis will reach digits, keep P_ and P_ or n_ and n_ apart by 7 digits or more. (In case of output OUT, n_, to be n_, and P_, to be P_,.) Note ) The flow switch is comformed to CE mark. 66

75 Digital Flow Switch for Water Series PFW Dimensions: Integrated Display Type for Water (.5) Connector pin numbers 77 Pin no. Pin description DC (+) OUT DC ( ) OUT Flow direction FLOW SWITCH U P 6 5 SET OUT OUT FOR WTER DOWN -Port size -ø.5 5 FOR MORE DETILS SEE OUR SPECIFIC CTLOGUES, PRODUCTS CD s OR ONLINE INFORMTION 67

76 Series PFW Digital Flow Switch for Water Digital Flow Switch, High Temperature Fluid Type For Water Series PFW Features Flow switch for hot water Remote display type Karmann vortex detection method No moving parts inside the sensor Very little resistance to passage of water Units with flow ranges from.5 to l/min Output for remote display, optional analogue output IP65 splashproof construction (Remote type display unit) How to Order Remote type Display unit Temperature range T to 9 C Specifications Model Measured fluid Detection type Flow rate measuring range Operating pressure range Withstand pressure Operating fluid temperature Linearity Note ) Repeatability Note ) Temperature characteristics Output Note ) specifications PFW5 T F Flow rate range Power supply voltage Current consumption (No load) Enclosure Operating temperature range Withstand voltage Insulation resistance Noise resistance Resistance Weight Port size Output for display unit nalogue output.5 to l/min to 6 l/min 5 to l/min F Thread type G Note ) The system accuracy when combined with PFW. Note ) Output system can be selected during initial setting. Note ) The sensor unitis comformed to CE mark. Output specifications Nil Output for display unit Output for display unit + nalog output ( to 5 V) Output for display unit + nalog output ( to m) Port size Symbol Port Flow rate (l/min) size 6 pplicable model /8 PFW5T/5T 6 / / PFW5T/5T PFW5T PFW5T PFW5T PFW5T Water, Mixture of water (5%) and ethylene glycol (5%) Karmann vortex.5 to l/min to 6 l/min 5 to l/min to MPa.5 MPa to 9 C (With no cavitation) ±5% F.S. or less ±% F.S. or less ±% F.S. or less (5 to 5 C based on 5 C), ±% F.S. or less ( to 5 C based on 5 C) Pulse output, N channel, open drain, output for display unit PFW. (Specifications: Maximum load current of m; Maximum applied voltage of V) Voltage output to 5 V within the flow rate range Linearity: ±5% F.S. or less; allowable load resistance: kω or more. Current output to m within the flow rate range Linearity: ±5% F.S. or less; allowable load resistance: Ω or less with VDC, 6 Ω or less with VDC to VDC (Ripple ±% or less) m or less IP65 Operating: to 5 C, Stored: 5 to 85 C (No condensation or freezing) VC for min. between external terminal and case 5 MΩ (5 VDC) between external terminal and case Vp-p, Pulse width µs, Rise time ns 66 g /8 /8, / /, / 68