928 Specialists Rear Sway Bar Installation

Size: px
Start display at page:

Download "928 Specialists Rear Sway Bar Installation"

Transcription

1 928 Specialists Rear Sway Bar Installation This document is also available for download on our website ( Any new revisions to these original instructions can be found there. Please read and understand these directions completely before you begin installation. Always feel free to call us at (828) if you have any questions. Raise and safely/properly support the rear of the 928. Remove both rear wheels. Removing Factory Sway Bar Drop Links CAUTION If your sway bar is bent or your 928 is not level there could be tension on the sway bar. It can pop upward or downward when removing. Step 1 - Remove both Lower Drop Link to Lower Control Arm bolts/washers. Save these bolt/washers for later as they are reused. Step Remove both upper drop link to sway bar mounting bolts. Original Sway Bar Drop Links should free and can be placed out of the work area.

2 Removing Factory Shock/Spring Coilover Assemblies Step 1 - Remove the Carpet from the Rear Cargo/Hatch area, look in the forward outside corner of this area and you will see the upper rear coilover mounting positions (just behind the rear seats). Step 2 Remove the 3 Nuts/Washers and cover from each upper rear coilover mount and the coilovers will be free of the mounts. Caution, your hub/brake assembly and suspension can drop suddenly a few inches when you remove these nuts, make sure the area underneath these components is clear. Step 3 Remove Rear Suspension Pin that retains Lower Coilover Mount, Lower Control Arm and Rear Wheel Hub Assembly.

3 Remove the nut from front side of vehicle, not rear side nut. In some cases you will find the rear nut will come loose before the front does, in this case use a matching nut as a jam or double nut on the rear nut to keep it from coming off. Mark Lower Shock to aid in proper orientation during re-install.

4 Remove Pin towards the rear, sometimes it is necessary to use a pry bar of some sort to get it started by prying behind the large washer. In extreme cases of corrosion it can help to spin it out using an impact wrench. Be sure to notice the orientation and location of the flat washer and 2 conical washers in the rear suspension Pin assembly. The conical washers will go in the concave recesses on each side of the wheel hub where the pin goes thru it. The flat washer goes between the rear of the shock mount and the rear of the lower control arm. Once the Suspension Pin has been completely removed the coilover is now free and should be placed out of the work area. Repeat above procedure on the other side. Lowering Rear Suspension/Transaxle Cross member Assembly Step 1 Loosen 4 Parking Brake Cable Retainers located on front side of Rear suspension cross member.

5 Step 2 Properly and safely Support Rear Suspension Cross member and Transaxle with Transmission type jack (see photos). Step 3 Remove one bolt on each side of the outboard rear suspension cross member mounting bolts located in the rear fender wheels and replace one each per side with the included long Safety Bolts and the original washer. (see photo) DO NOT depend on these bolts to support the transaxle rear suspension cross member assembly. They are only used as a guide for lowering the cross member and as an additional safety precaution in the event of a jack failure.

6 Step 4 - Remove Rear Suspension Cross member center mounting bolts found on each side of the transaxle. Do not remove the Transaxle mount bolts located closest to the transaxle. (see photo) Step 5 Remove remaining outboard rear suspension cross member bolts (one per side, see photo). DO NOT remove the long Safety Bolts. Step 6 - Carefully and slowly lower the Rear Suspension Cross Member and Transaxle assembly approx. 2 until it almost rests on the long Safety Bolts. Use caution and look closely for any lines or cables that may not be long enough and adjust the fasteners, clips or remove them if necessary.

7 Removing the original rear sway bar Step 1 - Remove the 2 bolts and washers from the sway bar mounting bushings (1 per side). Step 2 - Remove Sway Bar towards driver s side, you will need to rotate the sway bar in various directions and angles to work it out. Moving Rear Sway Bar Bushings and brackets from original sway bar to the New Sway Bar The Factory Sway Bar Mounting Brackets and bushings are reused and must be removed from the old bar and installed on the new bar. The mounting brackets wrap around the bushings and snap in place.

8 There are a variety of ways to remove these, but following is the easiest way we have found to do this procedure. Step 1 Use a large flat head screwdriver or similar pry bar and place it horizontally across the mount in between the locking tabs and as pictured below and pry in the direction of the arrow. This will unsnap the mount and you can then pry it open enough to remove the bracket and bushing. The bracket will look like this once removed Step 2 Lube the bushings and install on new sway bar in as close to the original positions as possible. Wrap the bushing bracket around the bushing and squeeze it closed with a clamp or similar device until it snaps closed. Be SURE you have the mounting bracket oriented in the proper directions. We suggest doing one side at a time so you can use the original as a guide.

9 Installing the Performance Sway Bar Step 1 Insert Sway Bar from Driver s side in the reverse process of removing the old sway bar. Step 2 Center Sway Bar in the mounts using the inner rear fender wheels as a guide

10 Step 3 Install original Bolts and washers and tighten mounting brackets. Re-install Rear Suspension/Transaxle Cross member Assembly and Coilovers by reversing the removal procedures above. Follow Factory Specs for Torque settings as outlined in the Factory Shop Manual or Tech Spec Booklets. Mounting Sway Bar Drop Links Step 1 Mount Sway Bar ends to upper drop links with supplied bolt, washers and locknut in 1 of the 3 link mounting positions on the sway bar ends. Torque to 50 ft/lbs. (see photo below) Adjustable Drop Link Mount Position descriptions: 1st hole (at the very end of the sway bar) is the soft location angle and is slightly stiffer than the stock sway bar. 2nd hole (middle) is stiffer location angle and is recommended for spirited street driving (most popular). 3rd hole is the stiffest position and is for extreme street/race application. Step 2 Mount Lower Drop Links to the Rear Lower Control Arm using the original bolts.

11 Repeat process on the other side Installing Sway Bar Locating Collars The Split-Ring Locating collars are a safety item for our sway bars and must be installed. In the rare event of a sway bar bushing mount failure, a sway bar can slide towards the opposite side of the 928. In the unlikely event that this happens it could cause potential suspension or wheel/tire contact and the results could be very dangerous. Properly installed Locating Collars will keep the bar from shifting sideways in this rare situation and must be installed! Installation is simple, remove the Allen bolts and separate the 2 halves of the collar. Reassemble the collar around the perimeter of the sway bar against the inside of the Sway Bar Bushing (see photo). Use Blue Locktite on the Allen bolts and torque to ft/lbs.

12 Repeat process for other side. Final Adjustments The Adjustable Drop links included in this kit are pre-adjusted in length to match the factory drop links and are ready to drive safely just as they are. However, to get the most from your new Performance Sway Bar it is recommended to adjust the pre-load using one of the adjustable drop links so the sway bar tension is neutral after you have driven and settled your suspension. You should drive at least 50 miles after the sway bar install before beginning this simple procedure. DO NOT JACK OR OTHERWISE RAISE YOUR 928! You can drive it on a 4 post type lift that raises the 928 by the tires, if desired. Step 1 Make sure your 928 is on a flat level surface, in gear or Park and the Parking bake is securely engaged. Wheel chocks are recommended to ensure your safety. Step 2 - Reach under the rear your 928 to gain access to one of the lower drop links where it attaches to lower control arm (whichever side is easier). Loosen the lower rod end lock nut. Then slowly loosen and remove the Drop link to Control Arm mounting bolt/washer. Depending on how much pre-load is on the bar it could move upwards or downwards sharply (use caution) as you loosen it. Step 3 Rotate Drop Link lower Rod End to lengthen or shorter the drop link until the bolt will go thru the drop link and into the lower control arm hole perfectly horizontal, without any binding. Once this is achieved, install the nut/washers and Torque to 45 ft/lbs. Step 4 - Counter hold the lower rod end of the drop link with a wrench and tighten the rod end lock nut securely. You are now ready to enjoy your new Performance Sway bar!

LIFT-304 (3 ) and LIFT-104 (6 ) Drop Spindle Lift Kits Yamaha G22, Gas or Electric Installation Instructions

LIFT-304 (3 ) and LIFT-104 (6 ) Drop Spindle Lift Kits Yamaha G22, Gas or Electric Installation Instructions LIFT-304 (3 ) and LIFT-104 (6 ) Drop Spindle Lift Kits Yamaha G22, Gas or Electric Installation Instructions LIFT-304 LIFT-104 Contents of LIFT-304/104 Yamaha G22 Lift Kit: a (1 ea.) Passenger Side Spindle

More information

LIFT-504. BMF Lift Kit. Yamaha G22 Gas or Electric. Installation Instructions

LIFT-504. BMF Lift Kit. Yamaha G22 Gas or Electric. Installation Instructions LIFT-504 BMF Lift Kit Yamaha G22 Gas or Electric Installation Instructions Contents of LIFT-504 Yamaha G22 BMF Lift Kit: a (1 ea.) BMF A-Arm Assembly b (1 ea.) Driver Side Shock Tower c (1 ea.) Passenger

More information

Sport Sway Bar Kit Mustang

Sport Sway Bar Kit Mustang Sport Sway Bar Kit 22102 2005 Mustang Installation of Hotchkis Front Sway Bar 1F Raising Vehicle Securely block the rear wheels of the vehicle. Use a jack to lift up the front of the vehicle and use jack

More information

Lightweight Tubular Sway Bar Kit Subaru WRX / STi / 09+ FXT

Lightweight Tubular Sway Bar Kit Subaru WRX / STi / 09+ FXT 915250 Lightweight Tubular Sway Bar Kit 2008+ Subaru WRX / STi / 09+ FXT Installation Instructions Congratulations on your purchase of the COBB Lightweight Tubular Sway Bar Kit for your Subaru WRX, STi

More information

Global West Suspension 655 South Lincoln Ave San Bernardino Ca Phone Fax Web address globalwest.

Global West Suspension 655 South Lincoln Ave San Bernardino Ca Phone Fax Web address globalwest. Global West Suspension 655 South Lincoln Ave San Bernardino Ca. 92408 Phone 877-470-2975 Fax 909-890-0703 Web address globalwest.net Mustang coilover instruction sheets for 64-66 Kit includes the following

More information

Installation Instructions

Installation Instructions Installation Instructions Eibach Springs, Inc. 264 Mariah Circle Corona, California 92879-1751 USA Tech Support 800-222-8811 Ext 114 Eibach Pro Street-S Coilovers - #2895.711 2009 Dodge Challenger, R/T,

More information

LIFT Standard A-Arm Lift Kit Club Car Precedent Installation Instructions

LIFT Standard A-Arm Lift Kit Club Car Precedent Installation Instructions LIFT-563 6 Standard A-Arm Lift Kit Club Car Precedent Installation Instructions Contents of LIFT-563 Club Car Precedent Lift Kit: a (1 ea.) Front Suspension b (1 ea.) Driver Side Upper A-Arm c (1 ea.)

More information

PPM-8022 / PPM-8042 JEEP JK STAGE 2 SYNERGY SUSPENSION SYSTEM Version 1

PPM-8022 / PPM-8042 JEEP JK STAGE 2 SYNERGY SUSPENSION SYSTEM Version 1 POLY PERFORMANCE MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-8022 / PPM-8042 JEEP JK STAGE 2 SYNERGY SUSPENSION SYSTEM Version 1 GENERAL NOTES: These instructions are also available

More information

BOSS AND ULTIMATE LIFT INSTALLATION INSTRUCTIONS TACOMA.

BOSS AND ULTIMATE LIFT INSTALLATION INSTRUCTIONS TACOMA. BOSS AND ULTIMATE LIFT INSTALLATION INSTRUCTIONS 2005-2015 TACOMA support@toyteclifts.com Prior to installation, please read all install directions and paperwork provided. ToyTec Lifts L.L.C. recommends

More information

PPM-8023 / PPM-8043 JEEP JK SYNERGY STAGE 3 SUSPENSION SYSTEM Version 1

PPM-8023 / PPM-8043 JEEP JK SYNERGY STAGE 3 SUSPENSION SYSTEM Version 1 SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-8023 / PPM-8043 JEEP JK SYNERGY STAGE 3 SUSPENSION SYSTEM Version 1 GENERAL NOTES: These instructions are also available on our website;

More information

MM Rear Coil-Over Kit - Bilstein Shocks (MMCO-3)

MM Rear Coil-Over Kit - Bilstein Shocks (MMCO-3) 3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com MM Rear Coil-Over Kit - Bilstein Shocks (MMCO-3) Read all instructions before

More information

COBB WRX Sports Springs West 1820 South Salt Lake City, UT USA (801)

COBB WRX Sports Springs West 1820 South Salt Lake City, UT USA (801) COBB 3362 West 1820 South Salt Lake City, UT 84104 USA (801) 713-0035 2008 WRX Sports Springs Congratulations on your purchase of the COBB Sports Springs. The following instructions should assist you through

More information

PRODUCT NOTES: These components are designed for suspension height adjustment lower than stock height.

PRODUCT NOTES: These components are designed for suspension height adjustment lower than stock height. INSTALLATION INSTRUCTIONS Progress Technology Competition Series Coilover System 2001 2005 Acura RSX 2001-2005 Honda Civic, Civic Si Revision B (2/19/13) WHO SHOULD INSTALL THIS PRODUCT? Progress Technology

More information

Eibach Pro-Damper Shocks & Struts (05-09 All):

Eibach Pro-Damper Shocks & Struts (05-09 All): Eibach Pro-Damper Shocks & Struts (05-09 All): Required tools: 3/8 and 1/2 drive ratchets 7, 8, 10, 15, 16, 17, 18, 21 & 22 mm open ended wrenches 8 & 10 mm box end wrenches 10mm socket 13, 15 & 18 mm

More information

SR Performance Sway Bars (2010 Mustang GT)

SR Performance Sway Bars (2010 Mustang GT) Total Installation time: Approximately 2 hours SR Performance Sway Bars (2010 Mustang GT) Tools Required: 15mm deep socket 18mm deep socket 19mm deep socket Ratchet with ½ drive Pliers Torque wrench 15mm

More information

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog# Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,

More information

REAR UPPER CONTROL ARM

REAR UPPER CONTROL ARM CHE PERFORMANCE PRODUCTS INSTALLATION INSTRUCTIONS REAR UPPER CONTROL ARM CHE2K: Tubular Upper: 2005-2010 Mustang CHE2L: Street/Strip Adjustable Upper: 2005-2010 Mustang CHE2M: Competition Adjustable Upper:

More information

FOR SIT-STAND WORKSTATION

FOR SIT-STAND WORKSTATION INSTALLATION MANUAL FOR SIT-STAND WORKSTATION Weight Capacity: 6.5-24.5 lbs. 6017180 Rev. B Contents Tools Required / Supplied Part Kits / Warnings/Disclaimers...2 Base Installation Clamp Mount Base Location...3

More information

SCION tc LOWERING SPRINGS Preparation

SCION tc LOWERING SPRINGS Preparation Preparation Part Number: PTR11-21100 PTR11-21100-50 Kit Contents Item # Quantity Reqd. Description 1 2 Front Spring 2 2 Rear Spring 3 2 Locking Nut 4 2 Spring Bumper, Front 5 1 Instruction Form Hardware

More information

Installation Instructions

Installation Instructions Installation Instructions Eibach Springs, Inc. 264 Mariah Circle Corona, California 92879-1751 USA Tech Support 800-222-8811 Ext 114 Eibach Pro Street-S Coilovers - #28110.711 2011-13 Dodge Challenger

More information

COBB SPORT SPRINGS

COBB SPORT SPRINGS 915760 - COBB SPORT SPRINGS 2008-2013 Subaru WRX/STi Congratulations on your purchase of the COBB Sport Springs for your 2008-2013 Subaru WRX/STi. The following instructions will assist you through your

More information

ULTIMATE LIFT INSTALLATION INSTRUCTIONS TACOMA.

ULTIMATE LIFT INSTALLATION INSTRUCTIONS TACOMA. ULTIMATE LIFT INSTALLATION INSTRUCTIONS 05-11 TACOMA support@toyteclifts.com Prior to installation, please read all install directions and paperwork provided. ToyTec Lifts L.L.C. recommends that all components

More information

Disassembly. Getting Started (IF USING BEARING UPPER MOUNT SKIP TO STEP 9) Installation Instructions.

Disassembly. Getting Started (IF USING BEARING UPPER MOUNT SKIP TO STEP 9) Installation Instructions. Part # 00-00 up Camaro Recommended Tools 00-up Camaro Front CoilOver Strut Table of contents Page... Included components Page... Disassembly and Getting Started Page... CoilSpring ssembly and Bearing Option

More information

2016 & Up Miata MX-5 Coilover Installation Instructions

2016 & Up Miata MX-5 Coilover Installation Instructions Page1 2016 & Up Miata MX-5 Coilover Installation Instructions Tooling: Jack, jack stands or lift Socket wrench Torque wrench 10mm, 12mm, 14mm and 17mm sockets 14mm and 17mm wrenches Flat head screwdriver

More information

WJ JEEP 4 Front and 3.5 Rear Lift Kit W/ Adj. Lower Control arms & Fr Adj. Track Rod

WJ JEEP 4 Front and 3.5 Rear Lift Kit W/ Adj. Lower Control arms & Fr Adj. Track Rod 92163900 WJ JEEP 4 Front and 3.5 Rear Lift Kit W/ Adj. Lower Control arms & Fr Adj. Track Rod Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician

More information

2015 up Mustang Front HQ CoilOver Strut

2015 up Mustang Front HQ CoilOver Strut Part # 70-05 up Mustang Recommended Tools 05 up Mustang Front HQ CoilOver Strut Installation Table of contents Page... Included components Page... Disassembly and Getting Started Page... Strut Assembly

More information

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion This kit is for either Mopar 8 ¾ or Mopar 9 ¾ (Dana). This kit is designed to work with axles with either GM 5 x 4.75 Bolt Pattern

More information

A i r R i d e C o n v e r s i o n S y s t e m I n s t a l l a t i o n I n s t r u c t i o n s. kelderman air ride

A i r R i d e C o n v e r s i o n S y s t e m I n s t a l l a t i o n I n s t r u c t i o n s. kelderman air ride A i r R i d e C o n v e r s i o n S y s t e m I n s t a l l a t i o n I n s t r u c t i o n s 800 334-6150 www.keldermanairride.com kelderman air ride The difference in the ride is like night and day Inside

More information

Tools Needed: Class 8.8 Class MM 55ft/lbs 75ft/lbs 14MM 85ft/lbs 120ft/lbs 16MM 130ft/lbs 165ft/lbs 18MM 170ft/lbs 240ft/lbs

Tools Needed: Class 8.8 Class MM 55ft/lbs 75ft/lbs 14MM 85ft/lbs 120ft/lbs 16MM 130ft/lbs 165ft/lbs 18MM 170ft/lbs 240ft/lbs 921788000 JEEP JK 6 LONGARM Rough Country recommends a certified technician install this system. In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai Hood Latch & Release Cable (SKU# SEB- HLCK) Installation Instructions Note: S u z u k i h a s upgraded both of these parts and they will not work with the hood latches and release

More information

Installation Instructions

Installation Instructions Installation Installation Part # 11503111-2010 up Camaro Recommended Tools 2010-up Camaro TQ Front CoilOver Strut Installation Table of contents Page 2... Included Components Page 3... Disassembly and

More information

WJ JEEP 4 Front and 3.5 Rear Lift Kit

WJ JEEP 4 Front and 3.5 Rear Lift Kit 92169800 Thank you for choosing Rough Country for all your suspension needs. WJ JEEP 4 Front and 3.5 Rear Lift Kit Rough Country recommends a certified technician install this system. In addition to these

More information

JEEP JK 4 LONGARM. Tools Needed: Thank you for choosing Rough Country for your suspension needs.

JEEP JK 4 LONGARM. Tools Needed: Thank you for choosing Rough Country for your suspension needs. 921786000 Thank you for choosing Rough Country for your suspension needs. JEEP JK 4 LONGARM Rough Country recommends a certified technician install this system. In addition to these instructions, professional

More information

*1698BAG7* 1698BAG7 WJ JEEP 4 WITH CONTROL ARM DROPS. Thank you for choosing Rough Country for all your suspension needs.

*1698BAG7* 1698BAG7 WJ JEEP 4 WITH CONTROL ARM DROPS. Thank you for choosing Rough Country for all your suspension needs. 92169820 Thank you for choosing Rough Country for all your suspension needs. WJ JEEP 4 WITH CONTROL ARM DROPS Rough Country recommends a certified technician install this system. In addition to these instructions,

More information

Rear Anti-Sway Bar for S60 AWD, S60R, V70AWD, V70XC & V70R ( )

Rear Anti-Sway Bar for S60 AWD, S60R, V70AWD, V70XC & V70R ( ) Dedicated to improving vehicle fun, safety & performance Installation Instructions Rear Anti-Sway Bar for S60 AWD, S60R, V0AWD, V0XC & V0R (2001-06) PI-2 0/05 Thank you for purchasing this anti-sway bar

More information

LIFT-503. BMF Lift Kit. Club Car Precedent. Installation Instructions

LIFT-503. BMF Lift Kit. Club Car Precedent. Installation Instructions LIFT-503 BMF Lift Kit Club Car Precedent Installation Instructions Contents of LIFT-503 Club Car Precedent BMF Lift Kit: a (1 ea.) BMF Front Suspension b (1 ea.) Driver Side Upper A-Arm (Shipped Loose)

More information

Installation Instructions

Installation Instructions Instructions Created by an: 2005+ Toyota Tacoma BTB Front Coilovers by Low Range Off Road SKU# TAC-SP-05CO-BTB-650 Diff Drop Kit (SKU# LR-2GDDK) Instructions included Installation Instructions Revised

More information

07-UP AVALANCHE 7.5 KIT

07-UP AVALANCHE 7.5 KIT 92120900R1 07-UP AVALANCHE 7.5 KIT Thank you for choosing Rough Country for your suspension needs. We appreciate your business!! This kit will not fit vehicles equipped with electric steering or trucks

More information

Tacoma/Tundra/4-Runner/Sequoia/Sway-A-Way Front Coilover Installation

Tacoma/Tundra/4-Runner/Sequoia/Sway-A-Way Front Coilover Installation 191 Granite St, Corona, CA 92879 Phone # 888-901-7693 afepower.com/swayaway Tacoma/Tundra/4-Runner/Sequoia/Sway-A-Way Front Coilover Installation Parts List -2 Sway-A-Way Coilover Shocks Tool List -5/32

More information

M-Force E36 Camber Plate Installation

M-Force E36 Camber Plate Installation Thank you for purchasing the Adjustable Camber Plate kit from Vorshlag Motorsports. In order to ensure proper installation and longevity of your kit, Vorshlag Motorsports recommends that you have your

More information

Tundra Racing LOWERING KIT INSTALLATION MANUAL Toyota Tundra 2wd & 4x4 Part #TR-2040 & TR-2050 Reg Cab, Double Cab & Crewmax

Tundra Racing LOWERING KIT INSTALLATION MANUAL Toyota Tundra 2wd & 4x4 Part #TR-2040 & TR-2050 Reg Cab, Double Cab & Crewmax Page 12 Front Coil Spring Perch, Sleeve and Bump Stops Leaf Spring Shackle and Hardware PARTS INCLUDED IN KIT Tundra Racing LOWERING KIT INSTALLATION MANUAL Axle Perches Top & Bottom Plates U-Bolts and

More information

You will be removing the suspension of your vehicle. If you are not comfortable with this or do not have the proper tools, please do not proceed.

You will be removing the suspension of your vehicle. If you are not comfortable with this or do not have the proper tools, please do not proceed. Thank you for purchasing the CorkSport Mazda 3 and Mazdaspeed 3 Coilover Kit. This suspension system features 15-way adjustable dampening settings and full length adjustment to meet every driver s handling

More information

Ford Racing GT500 Style Strut Mount Upgrade (05-12 All):

Ford Racing GT500 Style Strut Mount Upgrade (05-12 All): Ford Racing GT500 Style Strut Mount Upgrade (05-12 All): Required tools: (2) Jack stands Floor jack (1 is required but 2 is preferred) Torque wrench Spring compressor tool (can be rented at your local

More information

INSTALLATION OF HOTCHKIS PERFORMANCE DOUBLE ADJUSTABLE TRAILING ARMS

INSTALLATION OF HOTCHKIS PERFORMANCE DOUBLE ADJUSTABLE TRAILING ARMS 1215 DOUBLE ADJUSTABLE UPPER TRAILING ARMS 67-70 CHEVROLET B-BODY This installation will require: A hydraulic jack, jack stands The following wrenches or sockets: 15/16 Adjustable wrench (1-1/4 1-9/32

More information

FRONT SUSPENSION REMOVAL

FRONT SUSPENSION REMOVAL FRONT SUSPENSION REMOVAL 1. Raise the vehicle off the ground and firmly support it with safety stands, then, remove the front and rear tires. NOTE: Do not work on or underneath the car without the proper

More information

Slowly lower the floor jack. The spring will then come right out.

Slowly lower the floor jack. The spring will then come right out. Jack up the rear, install a set of jack stands and remove the rear tires. Put a floor jack under the lower transverse link (lower control arm) jack up the lower control arm about one inch. With the jack

More information

LIFT-507 BMF Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions

LIFT-507 BMF Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions LIFT-507 BMF Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions Contents of LIFT-507 E-Z-Go RXV BMF Lift Kit: a (1 ea.) BMF A-Arm Assembly b (1 ea.) Driver Side Shock Tower c (1 ea.) Passenger

More information

LIFT-506 BMF Lift Kit Club Car DS Gas & Electric Installation Instructions

LIFT-506 BMF Lift Kit Club Car DS Gas & Electric Installation Instructions LIFT-506 BMF Lift Kit Club Car DS Gas & Electric 2003.5-09 Installation Instructions Contents of LIFT-506 Club Car DS BMF Lift Kit: a (1 ea.) BMF Front Suspension b (1 ea.) Driver Side Upper A-Arm c (1

More information

J&M Mustang Rear Lower Control Arms (2005+) - Installation Instructions

J&M Mustang Rear Lower Control Arms (2005+) - Installation Instructions J&M Mustang Rear Lower Control Arms (2005+) - Installation Instructions The below installation instructions work for the following products: J&M Mustang Rear Lower Control Arms (2005+) Please read through

More information

INSTRUCTION S G-Comp Front Suspension: Chevy Camaro Speedway Motors, Inc Kit Contents:

INSTRUCTION S G-Comp Front Suspension: Chevy Camaro Speedway Motors, Inc Kit Contents: INSTRUCTION S 350-500 G-Comp Front Suspension: 70-81 Chevy Camaro Speedway Motors, Inc. 2017 Kit Contents: 350500.1 G-Comp Subframe, Camaro 350500.2 G-Comp Sway Bar Kit, Camaro 350500.3 Hardware Kit, G-Comp

More information

LG G5 Sway Bars Gen 5 Camaro

LG G5 Sway Bars Gen 5 Camaro LG G5 Sway Bars Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 Thank you for purchasing LG Motorsports products for your Gen 5 Camaro. Parts Inventory:

More information

Installation Instructions Mustang Level 2 Coilover. Part # Mustang Level 2 CoilOver System.

Installation Instructions Mustang Level 2 Coilover. Part # Mustang Level 2 CoilOver System. Part # 22020-979-989 Mustang Level 2 CoilOver System Front Components: 2230 Front CoilOver Strut Recommended Tools Rear Components: 2260 Rear Coilover 225899 Rear Lower StrongArms 226699 Rear Upper StrongArms

More information

INSTALLATION INSTRUCTIONS: LONG TRAVEL KIT 07+ FJ CRUISER and 05+ TACOMA

INSTALLATION INSTRUCTIONS: LONG TRAVEL KIT 07+ FJ CRUISER and 05+ TACOMA INSTALLATION INSTRUCTIONS: LONG TRAVEL KIT 07+ FJ CRUISER and 05+ TACOMA ISNTALLATION DIFFICULTY: Advanced APPROX TIME: 6-8 Hours REQUIRED TOOLS: 14mm-35mm sockets, wrenches, and ratchet 9/16 and 5/8 12

More information

RZR XP Lift Kit

RZR XP Lift Kit RZR XP 1000 2 Lift Kit Polaris RZR XP 1000/ XP4 1000 2014+ Part #: 5101224 Rev. 082316 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING

More information

INSTALLATION INSTRUCTIONS. FD3S RX7 Manual Rack Conversion

INSTALLATION INSTRUCTIONS. FD3S RX7 Manual Rack Conversion INSTALLATION INSTRUCTIONS FD3S RX7 Manual Rack Conversion 1 Removal of Stock Rack 1.1 With your steering wheel centered, remove the pinch bolt from the factory intermediate shaft lower knuckle. If you

More information

J&M Mustang Rear Adjustable Lower Control Arms Installation Guide (99-04)

J&M Mustang Rear Adjustable Lower Control Arms Installation Guide (99-04) J&M Mustang Rear Adjustable Lower Control Arms Installation Guide (99-04) 1. Required Tools: 1.1. 3/8 ratchet 1.2. 1/2 ratchet 1.3. 18mm deep socket 1.4. 18mm standard socket (optional) 1.5. 19mm open

More information

*1274BAG9* 1274BAG GM 4-6 SUSPENSION KIT N2.0. Thank you for choosing Rough Country for your suspension needs A

*1274BAG9* 1274BAG GM 4-6 SUSPENSION KIT N2.0. Thank you for choosing Rough Country for your suspension needs A 92127400A 88-98 GM 4-6 SUSPENSION KIT N2.0 Thank you for choosing Rough Country for your suspension needs. *1274BAG9* 1274BAG9 Rough Country recommends a certified technician installs this system. In addition

More information

2015 up Mustang Front HQ CoilOver Strut

2015 up Mustang Front HQ CoilOver Strut Part # 13110-015 up Mustang Recommended Tools 015 up Mustang Front HQ CoilOver Strut Installation Table of contents Page... Included components Page 3... Disassembly and Getting Started Page... Strut Assembly

More information

Tacoma Front Suspension Install Instructions

Tacoma Front Suspension Install Instructions 1995-04 Tacoma Front Suspension Install Instructions Important notices: These instructions are intended only as a general guide for installing All-Pro products. For some items, specialized mechanical skills,

More information

Product: Variable Height Spring. Part Numbers: N. Applications: BMW F8x, M2/M3/M

Product: Variable Height Spring. Part Numbers: N. Applications: BMW F8x, M2/M3/M Product: Variable Height Spring Part Numbers: 415-503001-N Applications: BMW F8x, M2/M3/M4 2014-17 Contents in the box: Qty Part # Description 1 00P-0A1646-B Front Passenger Sleeve Assembly 1 00P-0A1645-N

More information

09-12 Dodge 4WD Leveling Kit

09-12 Dodge 4WD Leveling Kit 9235900 09-12 Dodge 4WD 1500 2.5 Leveling Kit Thank you for choosing Rough Country for all your suspension needs. DOES NOT FIT TRX PACKAGE VEHICLES!! Rough Country recommends a certified technician install

More information

Installation Instructions HURST STAGE 1 SPRING KIT Chevrolet Camaro SS Fits: Coupe and Convertible Catalog #

Installation Instructions HURST STAGE 1 SPRING KIT Chevrolet Camaro SS Fits: Coupe and Convertible Catalog # Installation Instructions HURST STAGE 1 SPRING KIT 2016-2017 Chevrolet Camaro SS Fits: Coupe and Convertible Catalog # 6130001 WORK SAFELY: Installation of any Hurst Spring Kit should be performed ONLY

More information

RHINO SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS

RHINO SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS PARTS INCLUDED: 2 FRONT UPPER A-ARMS 2 FRONT LOWER A-ARMS 2 UNI-BALL JOINTS 2 UNI-BALL JOINT STUDS 2 UNI-BALL JOINT CAPS 2 RETAINING RINGS 1 FRONT SHOCK ASSEM. 2 DELRON STEERING STOPS 2 SHOCK MOUNT SPACERS

More information

Installation Instructions

Installation Instructions Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to

More information

PRE-INSTALLATION. INSTALLATION INSTRUCTIONS STEP 1: Park vehicle on level surface and chock rear wheels.

PRE-INSTALLATION. INSTALLATION INSTRUCTIONS STEP 1: Park vehicle on level surface and chock rear wheels. 2007-2013 7.5" GMC/Chevrolet 1500 4WD Suspension Lift kit PRE-INSTALLATION 15004 2 - Cross-member (Fr/Rr) 2 - Sway Bar Drop Bracket 2 - Knuckle (Dr/Pass) 1 - Driver Diff. Bracket 1 - Passenger Diff. Bracket

More information

GM C10 Street Grip

GM C10 Street Grip Part # 11365010/11365110-1973-1987 GM C10 StreetGrip Front Components 11369590 Delrin Control Arm Bushings 11369300 Drop Spindles 11362350/11362351 Front CoilSpring Kit 11369515 Front HQ Series Shocks

More information

97-02 JEEP TJ BODY LIFT KIT INSTRUCTIONS

97-02 JEEP TJ BODY LIFT KIT INSTRUCTIONS 92RC60500 97-02 JEEP TJ BODY LIFT KIT INSTRUCTIONS Congratulations on your purchase of a new Rough Country 2 /3 Body Lift. We are committed to providing you with the best product available for the best

More information

FRONT & 4 REAR GM WD LOWERING KIT

FRONT & 4 REAR GM WD LOWERING KIT 92725200 88-98 2 FRONT & 4 REAR GM 1500 2WD LOWERING KIT Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition

More information

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Page 1 Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage

More information

DODGE 3 SUSPENSION LIFT KIT

DODGE 3 SUSPENSION LIFT KIT 921351200 Kit Contents: 9280:Front Coil Springs 1351BOX1: Upper Control Arms Lower Control Arms Sway bar Brackets Brake Proportioning Valve Bracket Track Bar Relocation Bracket 1351BOX2: 5.75 Blocks U-bolt

More information

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion This kit is for either Mopar 8 ¾ or Mopar 9 ¾ (Dana). This kit is designed to work with axles with either GM 5 x 4.75 Bolt Pattern

More information

97-06 JEEP TJ REPL BODY BUSHING / 1 BODY LIFT KIT

97-06 JEEP TJ REPL BODY BUSHING / 1 BODY LIFT KIT 9RC60700 97-06 JEEP TJ REPL BODY BUSHING / BODY LIFT KIT Congratulations on your purchase of a new Rough Country Body Bushing / Body Lift Combo. We are committed to providing you with the best product

More information

FORD COBRA JET SPRING INSTALLATION

FORD COBRA JET SPRING INSTALLATION FORD COBRA JET SPRING INSTALLATION Tools Needed: 1. Floor jack with rubber padding on lift point or vehicle lift 2. Jack stands (2) 3. Socket sizes 13/16, 3/4, 15mm, 8mm 4. Pliers 5. Breaker bar, ratchet

More information

Installation Manual TWM Performance Short Shifter Subaru Forester up to 2005

Installation Manual TWM Performance Short Shifter Subaru Forester up to 2005 - 1 - Installation Manual TWM Performance Short Shifter Subaru Forester up to 2005 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS --300 W PONTIAC WAY CLOVIS, CA 93612 local: 559-875-0222 fax: 559-876-2249 toll free: 800-445-3767-- 25007 LIFT / LOWERING STRUT 2015+ FORD F-150 2WD (+1 to -3 ) 2015+ FORD F-150

More information

»Product» Safety Warning

»Product» Safety Warning C2402, C2602 Installation Instructions 2007-2013 Chevy 1/2 Ton 2wd Pickup 4.5", 6.5" Suspension System Read and understand all instructions and warnings prior to installation of product and operation of

More information

»Product» Safety Warning

»Product» Safety Warning C1351 Installation Instructions 2014 Chevy/GMC, ½ Ton, 2/4wd 3.5" Combo Kit Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad Products

More information

»Product» Safety Warning

»Product» Safety Warning C2453/C2653 Installation Instructions 2014-2016 Chevy/GMC 1500 2WD 4.5"/6.5" Suspension Systems Read and understand all instructions and warnings prior to installation of product and operation of vehicle.

More information

Thank you for choosing Rough Country for all your suspension needs.

Thank you for choosing Rough Country for all your suspension needs. Nissan 2016 Titan XD 6 Suspension Kit Thank you for choosing Rough Country for all your suspension needs. 921877200F *1877BAG11* 1877BAG11 Rough Country recommends a certified technician install this system.

More information

»Product» Safety Warning

»Product» Safety Warning J1400, J1401 Installation Instructions 1997-2006 Jeep TJ 4 Suspension Lift Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad Products

More information

'99-03 CHEVROLET/GMC IFS 4WD 6" SUSPENSION SYSTEM P/N INSTALLATION INSTRUCTIONS

'99-03 CHEVROLET/GMC IFS 4WD 6 SUSPENSION SYSTEM P/N INSTALLATION INSTRUCTIONS 1/16/04 '99-03 CHEVROLET/GMC IFS 4WD 6" SUSPENSION SYSTEM P/N. 10-41099 INSTALLATION INSTRUCTIONS NOTE: Each Lift Kit and options to Lift Kits are packaged separately. Therefore, installation procedures

More information

Jeep Grand Cherokee ZJ 4 Suspension Kit

Jeep Grand Cherokee ZJ 4 Suspension Kit 92168800 Jeep Grand Cherokee 93-98 ZJ 4 Suspension Kit Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition

More information

Steeda S550 Mustang Front Coilover Installation Instructions For Part:

Steeda S550 Mustang Front Coilover Installation Instructions For Part: Steeda S550 Mustang Front Coilover Installation Instructions For Part: 555-8170 Tools required 1. Jack 2. Jack stands 3. Torque Wrench 4. 10mm wrench 5. 11mm wrench 6. 17mm wrench 7. 18mm socket 8. Plastic

More information

63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit

63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit PRO COMP SUSPENSION 63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit This document contains very important information that includes warranty information and instructions for resolving

More information

Tooling List 10mmSocket 12mm Socket 17mm Wrench 17mm Socket 3/8 Drive Ratchet 12 Extension Needle Nose Pliers Torque Wrench

Tooling List 10mmSocket 12mm Socket 17mm Wrench 17mm Socket 3/8 Drive Ratchet 12 Extension Needle Nose Pliers Torque Wrench Thank you for purchasing the CORKSPORT Mazdaspeed 3/ Mazda 3 Transmission Mount. Designed as an improved OEM replacement, the CorkSport Mazdaspeed 3 Transmission Mount maintains OEM fitment while greatly

More information

INSTALLATION INSTRUCTIONS Progress Technology Rear Anti-Sway Bar Honda Civic Part # No Revision (7/20/16)

INSTALLATION INSTRUCTIONS Progress Technology Rear Anti-Sway Bar Honda Civic Part # No Revision (7/20/16) INSTALLATION INSTRUCTIONS Progress Technology Rear Anti-Sway Bar Honda Civic 96-00 Part # 62.1042 No Revision (7/20/16) WHO SHOULD INSTALL THIS PRODUCT? Progress Technology products should only be installed

More information

INSTALLATION INSTRUCTIONS MKIV Toyota Supra Manual Rack Conversion

INSTALLATION INSTRUCTIONS MKIV Toyota Supra Manual Rack Conversion INSTALLATION INSTRUCTIONS MKIV Toyota Supra Manual Rack Conversion 1 Removal of Stock Rack 1.1 With your steering wheel centered, remove the pinch bolt from the factory intermediate shaft. This is located

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS --300 W PONTIAC WAY CLOVIS, CA 93612 local: 559-875-0222 fax: 559-876-2249 toll free: 800-445-3767-- 6446 5.5 REAR AXLE FLIP-KIT 2015+ FORD F-150 2WD SHORT BED Thank you for being

More information

Steeda Sport Mustang Lowering Springs (2005+) - Installation Instructions

Steeda Sport Mustang Lowering Springs (2005+) - Installation Instructions Steeda Sport Mustang Lowering Springs (2005+) - Installation Instructions The below installation instructions work for the following products: Steeda Sport Mustang Lowering Springs (2005+) Please read

More information

Installation Instructions for Teraflex 2.5 Inch Lift Kit with Shocks (2010 Jeep Wrangler Unlimited)

Installation Instructions for Teraflex 2.5 Inch Lift Kit with Shocks (2010 Jeep Wrangler Unlimited) Installation Instructions for Teraflex 2.5 Inch Lift Kit with Shocks (2010 Jeep Wrangler Unlimited) Installation Time: 6 Hours Tools Required: Floor Jack Jack Stands Ratchet Torque Wrench 15mm Socket 15mm

More information

BOSS/ULTIMATE LIFT INSTALLATION INSTRUCTIONS 07+ TUNDRA.

BOSS/ULTIMATE LIFT INSTALLATION INSTRUCTIONS 07+ TUNDRA. BOSS/ULTIMATE LIFT INSTALLATION INSTRUCTIONS 07+ TUNDRA support@toyteclifts.com. Prior to installation, please read all install directions and paperwork provided. ToyTec Lifts L.L.C. recommends that all

More information

2016+ Mazda Miata Front & Rear Sway Bar Installation Instructions

2016+ Mazda Miata Front & Rear Sway Bar Installation Instructions Page1 James Barone Racing Aftermarket Parts and Accessories 2016+ Mazda Miata Front & Rear Sway Bar Installation Instructions Tools Required: Jack Lift or ramps Ratchet wrench Torque Wrench 6 and 12 Extension

More information

Remove the 3-11mm nuts holding mirror on. Don t drop the nuts!

Remove the 3-11mm nuts holding mirror on. Don t drop the nuts! 2005-2012 Ford Mustang Puddle Lamp Kit Parts List: Quantity: Tool List: LED Lamps 2 Flat head screwdriver Seals 2 Ratchet & Socket set OR Nuts 2 Adjustable Wrench Wiring harness 1 Drill & 11/16 th bit

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 214205 INSTALLATION INSTRUCTIONS 8-27-2015 REV.A PART # DESCRIPTION 7929 Lincoln Ave. Riverside, CA 92504 Phone: 951.689.ICON Fax: 951.689.1016 214205 14-UP RAM 2500 4.5 BOX KIT COMPONENTS INCLUDED (1)

More information

PRODUCT USE INFORMATION

PRODUCT USE INFORMATION 921878200E *1878BAG11* 1878BAG11 Nissan 2017 Titan 6 Suspension Kit Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system.

More information

Suzuki Samurai to Toyota Front Spring Swap Kit, with Missing Link Shackles (SKU#SSP-TSFM) Installation Instructions

Suzuki Samurai to Toyota Front Spring Swap Kit, with Missing Link Shackles (SKU#SSP-TSFM) Installation Instructions Suzuki Samurai to Toyota Front Spring Swap Kit, with Missing Link Shackles (SKU#SSP-TSFM) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related

More information

HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog # by Hurst Performance

HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog # by Hurst Performance FORM 159 0205 07/15 HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog #391 0205 2015 by Hurst Performance Thank you for purchasing the Hurst Comp/Plus Shifter.

More information

Moddit. How to Install Stance Coilovers on a Subaru

Moddit. How to Install Stance Coilovers on a Subaru Moddit How to Install Stance Coilovers on a Subaru BRZ Let's get LOW (and maybe lighter and stiffer suspension)! In this article, we will install Stance ST- ZN6-XS Coilovers on the FRSport Subaru BRZ.

More information

INSTRUCTION G-Comp Unser Edition Rear Suspension: Chevy Nova. Kit Contents:

INSTRUCTION G-Comp Unser Edition Rear Suspension: Chevy Nova. Kit Contents: INSTRUCTION 350-400 G-Comp Unser Edition Rear Suspension: 62-67 Chevy Nova Speedway Motors, Inc. 2017 Kit Contents: 350003.1 G-Comp Chassis Brace 350003.2 G-Comp Front Support 350400.1 Chevy II Unser Rear

More information

INSTALLATION INSTRUCTIONS CATCH CAN KIT

INSTALLATION INSTRUCTIONS CATCH CAN KIT INSTALLATION INSTRUCTIONS CATCH CAN KIT FORD FIESTA ST Document: 19-0175 Support: info@radiumauto.com STEPS 1-14 COVER THE PCV SIDE CATCH CAN KIT (P/N: 20-0377) STEPS 15-31 COVER THE CRANKCASE CATCH CAN

More information