Parts Catalog. Document Number: UG-013JDCUPKCAYA Revision: 2 Revision Date: March Replacement Parts for. Diesel Engines

Transcription

1 Parts Catalog Document Number: UG-0JDCUPKCAYA Revision: Revision Date: March 0 Replacement Parts for John Deere, Cummins (Mid - Range), Perkins, Caterpillar & Yanmar Diesel Engines FLORIDA WAREHOUSE 0900 NW 0 th Street Miami, Florida 7 CALIFORNIA WAREHOUSE 0 Bloomfield Ave Unit Q Santa Fe Springs, California Tel: (0) / Fax: (0) 9-0 Toll Free Number: (800) sales@maxiforce.com Visit our Web site: Equal Opportunity / Affirmative Action Employer COPYRIGHT 0, MAXIFORCE, INC. John Deere is the registered trademark of Deere & Co., Cummins is the registered trademark of Cummins Inc., Perkins is the registered trademark of Perkins Engines Ltd., Caterpillar and Cat are the registered trademark of Caterpillar Inc., Yanmar is the registered trademark of Yanmar Diesel Engine Co., Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers.

2 Index Maxiforce Parts Catalog: UG-0JDCUPKCAYA-0 Introduction to the Maxiforce Catalog... a Warranty and Policies... b Abbreviations... c John Deere Introduction... IT0 Engine and Equipment Application Chart... IT0-IT09 Engine Overhaul s & Components... T0-T7 Miscellaneous Parts also Available with Maxiforce... T7 Water Pump Repair Components and Identification Chart... IT0-IT Torque Information... IT Cummins B & C (Mid-Range) Introduction... IC0 CPL and Equipment Application Chart... IC0-IC06 Engine Overhaul s & Components... C0-C7 Miscellaneous Parts also Available with Maxiforce... C8 Torque Information... IC07 Perkins Introduction... IP0 Engine Identification Guide... IP0 Engine and Equipment Application Chart... IP0-IP Engine Overhaul s & Components... P0-P87 Miscellaneous Parts also Available with Maxiforce... P88 Torque Information... IP Caterpillar Introduction... IB0 Engine Overhaul s & Components... B0-B Miscellaneous Parts also Available with Maxiforce... B6 Yanmar Introduction... IY0 Engine Overhaul s & Components... Y0-Y Pagina en Español... d IMPORTANT WE ARE CONSTANTLY ADDING NEW ITEMS TO OUR LINE CLICK ON New Products IN OUR WEB PAGE OR CALL US FOR MORE DETAILS

3 CATALOG UG-0JDCUPKCAYA-0 Introduction to Catalog UG-0JDCUPKCAYA-0 Maxiforce, Inc. is a company devoted to the manufacture and distribution of replacement parts for diesel engines. We are very proud and satisfied to have grown steadily for more than a decade, while maintaining a loyal customer base. Maxiforce, Inc., has very well defined goals: To provide top quality replacement parts, at competitive prices, for John Deere diesel engines, Cummins - Consolidated Diesel (Mid-Range) engines, Perkins diesel and gasoline engines, Caterpillar engines and Yanmar engines. To make these parts immediately available from stock by maintaining a complete inventory. To provide technical expertise and advice through a knowledgeable and highly experienced customer service department. To offer the most user friendly, yet detailed catalog in the industry. Thus: We proudly present our CATALOG UG-0JDCUPKCAYA-0, which incorporates five color coded sections for John Deere (Green), Cummins-CDC - Midrange -(Red), Perkins (Blue), Caterpillar (Yellow), and Yanmar (Orange). At the beginning of each section you will find an introductory page to address the specifics of the engine brands covered by this catalog. This catalog is designed to provide a practical and simple way to determine the correct parts required to repair these engines. Any comments or suggestions regarding the content of this catalog will be greatly appreciated. Please read this catalog very carefully. Although Maxiforce has gone to great lengths to provide for the accuracy of all printed material, we do not take responsibility for incorrect information. You must always read your OE engine Technical Manual for proper installation and use of product. In case of doubt call our technical support Hot Line: , our technicians will be very pleased to provide the necessary help. Parts and prices are subject to change without notice John Deere is the registered trademark of Deere & Co., Cummins is the registered trademark of Cummins Inc., Perkins is the registered trademark of Perkins Engines Ltd., Caterpillar and Cat are the registered trademark of Caterpillar Inc., Yanmar is the registered trademark of Yanmar Diesel Engine Co., Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: a

4 All Maxiforce replacement parts are warranted to be free from defects in material and workmanship under normal operating conditions. Warranty coverage will extend for one year from the date of invoice, without regard to hours of operation. Maxiforce will pay for all labor and parts needed to repair the warrantable failure. CONDITIONS AND LIMITATIONS: Maxiforce must be notified by the customer before filing a warranty claim, or before any work has been peformed. All claims must be submitted in writing and Maxiforce reserves the right to examine all elements involved in the claim. Price of parts will be based on Maxiforce's current price list and cost of labor will be a reasonable flat hourly rate. Overtime and holiday rates are not accepted. This warranty is extended exclusively to direct customers of Maxiforce and not to any other party. All other warranties, expressed or implied, including warranties of merchantability and/or fitness for a particular purpose are excluded. This warranty will not apply to any Maxiforce part altered from its original specifications or which has been misused, exposed to deteriorating conditions, negligence or accidental damage. CLAIMS & RETURNS Maxiforce should be advised of all claims within five days of receipt of merchandise, either by fax, telephone, or mail. Maxiforce will not accept returned products without prior written authorization from Maxiforce. All return requests must be submitted in advance for approval. A Return Goods Authorization (RMA) number must be obtained from Maxiforce for all returned parts. All parts should be returned by prepaid freight unless otherwise stated. If sent collect, freight amount will be charged to customer. Products returned that are dirty, in un-saleable condition or that were ordered in error by our customer, will be subject to a % restocking fee. Any parts that are returned in a used or damaged condition, will not be considered for credit. All RMA s must be received within 0 days of issued. RMA s not received will be voided. International orders will be credited in case of under shipment. Credits require 0 days to process from date of receipt of merchandise. Customers must keep all information on return, including RMA number and tracking number. Maxiforce claims no obligation to issue credit on obsolete products. Products will not be considered for credit after year from invoice date. Gasket sets that have been opened or re-taped will not be considered for credit. BACKORDER POLICY Backorders will be cancelled unless otherwise stated. Warranty and Policies CREDIT POLICY All products will be sold on a C.O.D. basis or you may use any major credit card until and if credit is approved. All invoices will be payable by the 0th of the next month (Net 0th). Accounts that go past 60 days past due will be placed on C.O.D shipping status. A.% monthly interest fee will be charged to all accounts 0 days past due. FREIGHT POLICY Within the Continental U.S.A., Maxiforce will prepay freight on all shipments over $ or those consisting of or more overhaul engine kits. All prices are F.O.B our warehouses. MINIMUM PURCHASE ORDER POLICY Due to high order-processing costs, a $0.00 handling surcharge will be added to all orders under $0.00. b TEL , , FAX 0.9.0

5 CATALOG UG-0JDCUPKCAYA-0 Abbreviations used throughout this catalog: A Turbo Aftercooled (m) Marked A/C Air Conditioned MF Massey Ferguson AG Agricultural N/A Not Available BLK Engine Block O/H Overhaul CDC Consolidated Diesel OK Overhaul CPL Control Part List O/S Oversize C/H Cylinder Head P.T. PowerTech C/R Connecting Rod Q Quantity C/S Crankshaft SBS Short Block Serial Number. D Diesel, Naturally Aspirated STD Standard ESN Engine Serial No T Turbocharged I/E Intake/Exhaust TS Tractor Serial Number. I/F In Frame U/S Undersize IK In Frame () Please refer to RED Numbered Cells in each page. They are the source of important information. Serial Number References: >,6 Denotes: from up to,6,000 -,8 Denotes: in between the two serial numbers,86 > Denotes: from,86 up John Deere is the registered trademark of Deere & Co., Cummins is the registered trademark of Cummins Inc., Perkins is the registered trademark of Perkins Engines Ltd., Caterpillar and Cat are the registered trademark of Caterpillar Inc., Yanmar is the registered trademark of Yanmar Diesel Engine Co., Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: c

6 Diesel Engine models covered by this User's Guide 00 Series (OEM): US and EUROPEAN Versions. Naturally Aspirated & Turbo Charged NUMBER OF CYLINDERS cyl cyl 6 cyl 00 Series: Naturally Aspirated & Turbo Charged NUMBER OF CYLINDERS cyl 6 cyl Introduction to John Deere Section BORE-.86 / 98 mm STROKE-. / 0 mm..0 BORE-. / 08 mm STROKE-.7 / mm 00 Series: Naturally Aspirated & Turbo Charged BORE-.0 / 0 mm STROKE-. / 0 mm BORE-.6 / 6 mm STROKE-.7 / mm / 6076* BORE-.9 / 06. mm STROKE-. / 0 mm.79 / 09*.9 / 09* 6.9 / 609* BORE-.9 / 06. mm STROKE-.00 / 7 mm.76 / 0* 6. / 6068* NUMBER OF CYLINDERS 6 cyl BORE-.7 / mm STROKE-.00 / 7 mm 6. BORE-. / 0 mm STROKE-.00 / 7 mm 6.69 / 60* PowerTech Series: Naturally Aspirated & Turbo Charged * NUMBER OF CYLINDERS cyl cyl 6 cyl Liter designated engines. BORE-.9 / 06. mm STROKE-. / 0 mm 09 (.9L) John Deere Data Plate Information In as much as possible please provide your John Deere data information to your Maxiforce Sales representative. The John Deere Data Plate is divided into the ESN (Engine Serial Number) and the Engine Application Data. Below are examples: ) Engine Serial Number: TO 0T 6 - Factory Origin - Engine Model - Sequential Serial Number BORE-.9 / 06. mm STROKE-.00 / 7 mm 0 (.L) 6068 (6.8L) ) Engine Application Data: TO 0T F0. This information is used to identify the OEM relationship or equipment application. Very Important! Maxiforce Engine Composition for John Deere Applications Engine Overhaul s Include: All required piston-liner kits, pins and retainers, engine bearings, crankshaft seals, complete overhaul gasket set, cam or balance shaft bushings, piston bushings, injector grommets, and connecting rod bolts. Engine In Frame s Include: All required piston-liner kits, pins and retainers, engine bearings, head gasket set, oil pan gasket and connecting rod bolts. BORE-.6 / 6 mm STROKE-.06 / 9 mm 608 (8.L) IT0 TEL , , FAX 0.9.0

7 . O'rings on liner T0. O'rings on block T0.6 Small pin, O'rings on liner T0.6 Small pin, O'rings on block T0.6 Large pin, O'rings on block T0.79D T06 09D Liter designated T07.79T T08 09T Liter designated T09.0 O'rings on liner T0.0 O'rings on block T.9 Small pin, O'rings on liner T.9 Small pin, O'rings on block T.9 Large pin, O'rings on block T.9D T 09D Liter designated T6.9T See Con.Rod (m) T7 09T Liter designated T8.76D Small pin T9.76D Large pin T0 0D Liter designated T.76T T 0T Liter designated T 6.0 O'rings on liner T 6.0 O'rings on block T 6.9 Small pin, O'rings on liner T6 6.9 Small pin, O'rings on block T7 6.9 Large pin, O'rings on block T8 6.9D T9 609D Liter designated T0 6.9T T 609T Liter designated T 6.D Large pin T 6068D Liter designated, Large pin T 6.T T 6068T Liter designated T6 Application Chart MODEL COMMENTS PAGE.70 See block (m) T7.70 See block (m) T8.70 Early power booster T9.70 See block (m) T0 6.0D See block (m) T WEB SITE: CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES This chart refers to engine and equipment models. It has been divided into several sections: OEM Engines; Farm Equipment; Construction Equipment; Skidders, Feller Brunchers, Forklifts, Compactors; and other OEM applications. The Chart will offer the reader the desired Model and will indicate the page number where engine components are described in detail. Whenever possible, please verify Engine Model with that of the Equipment since re-power may have occurred. 00 Series (OEM) OEM Engine & Power Unit Application Chart MODEL COMMENTS PAGE MODEL COMMENTS PAGE 00 Series 6.0D See block (m) T 6.0D Early power booster T 6.0D See block (m) T 6.0D See block (m) T 6.0T/A >,8 T6 6.0T/A,86 > T7 6.66D See Con.Rod (m) T8 6.66A/T See Con.Rod (m) T9 6.66A/T See Con.Rod (m) T0 6.66A See Con.Rod (m) T 6.076T/A/H Low Ring Piston T 6.076T/A/H High Ring Piston T 00 Series MODEL COMMENTS PAGE 6.D See Con.Rod (m) T 6.T See Con.Rod (m) T 6.A See Con.Rod (m) T6 6.69A/T Early T7 6.69A/T Mid T8 6.69A/T Late T9 6.0A/T > 99,999 T60 John Deere / Yanmar PowerTech MODEL COMMENTS PAGE 0D 8mm Bore Non Turbo T6 00D 8mm Bore Non Turbo T6 00T 8mm Bore Turbo T6 MODEL COMMENTS PAGE 09 (.9D) Piston (m) RE667/RE000 T6 09 (.9T) Piston (m) RE670 T6 0 (.D) Piston (m) RE979/RE00 T66 0 (.T) Piston (m) RE977/RE000 T67 0 (.T/H) Piston (m) RE/RE00 T (6.8D) Piston (m) RE979/RE00 T (6.8T) Piston (m) RE977/RE000 T (6.8T/H) Piston (m) RE/RE00 T7 608 (8.L) High Compression Piston T7 608 (8.L) Low Compression Piston T (9.0L) T7 John Deere is the registered trademark of Deere & Co., Moline, IL. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. IT0

8 Agricultural Equipment MODEL DESCRIPTION COMMENTS PAGE 99 Cotton Picker,9 Eng T/T 99 Cotton Picker 6,9 Eng T7/T8 699 Cotton Picker * T/T 80 Farm Tractor * T0/T0 80 Farm Tractor T0 90 Combine T 9 Combine T 9 Combine T7 90 Combine T8 9 Combine T7 9 Combine T9 960 Combine T8 97 Combine T9 98 Combine T9 00 Farm Tractor T0 00 Farm Tractor T0 00 Farm Tractor * T0/T0 0 Farm Tractor T 00 Farm Tractor T06 0 Combine T7 0 Combine T9 07 Combine T9 0 Farm Tractor T 0 Farm Tractor T06 Combine T7 8 Combine T 70D Harvester T7 0 Farm Tractor T06 0 Farm Tractor T0 70D Harvester T7 0 Farm Tractor * T0/T0 0 Farm Tractor T0 0 Farm Tractor T0 0 Farm Tractor T06 60 Farm Tractor T06 6 Farm Tractor T 60 Farm Tractor T 70 Farm Tractor T06 80 Farm Tractor T 80 Farm Tractor T06 00 Farm Tractor * T0/T 00 Farm Tractor * T/T 0 Farm Tractor T 00 Farm Tractor * T0/T Combine T 0 Farm Tractor * T/T 0 Farm Tractor * T 0 Farm Tractor T Farm Tractor T 0 Farm Tractor T7 0 Farm Tractor T06 Farm Tractor T06 0 Farm Tractor T06 0 Farm Tractor T 6 Combine T7 8 Combine T7 6 Combine (S.N 0688 >) T7 6 Combine (S.N > 0688) T7 66 Combine (S.N > 0688) T7 IT0 Equipment Application Chart MODEL DESCRIPTION COMMENTS PAGE 66 Combine (S.N 0688 >) T7 66 Extra Combine (S.N 0688 >) T7 70 Windrower * T/T 80 Windrower T 0 Windrower * T/T 0 Farm Tractor T0 0 Farm Tractor T Farm Tractor T CS Farm Tractor * T NCS Farm Tractor T08 NTSS Farm Tractor T08 60 Windrower T 0 Windrower T 0 Farm Tractor T 0 Farm Tractor T/T7 0 Farm Tractor * T0/T 0 Farm Tractor T 0 Farm Tractor T Farm Tractor Mexico T 0 Farm Tractor T /TSS Farm Tractor T7 CS Farm Tractor T 60 Farm Tractor T9 60 Farm Tractor T9 60 Farm Tractor T/T7 70 Farm Tractor Argentina T 7 Farm Tractor Mexico T 70 Farm Tractor T7 7 Farm Tractor T7 7CS Farm Tractor T7 7TSS Farm Tractor T7 80 Farm Tractor T8 80 Farm Tractor T7 8/N Farm Tractor T7 90 Farm Tractor T9 90 Farm Tractor T9 9 Farm Tractor * T9/T0 00 Farm Tractor T8/T9 00 Farm Tractor * T7/T8 00 Farm Tractor * T9/T0 00 Farm Tractor T9 00 Farm Tractor T9 00 Farm Tractor T6 0 Farm Tractor * T6/T7 0 Farm Tractor T8 0 Farm Tractor Spain T9 0C Farm Tractor * T/T 0 Farm Tractor T9 /TSS Farm Tractor * T9/T0 Farm Tractor * T9/T0 00 Combine T 0 Farm Tractor Argentina T 0 Farm Tractor T9 0/X Farm Tractor T67 0 Farm Tractor T 0 Windrower Early T 0 Windrower Late T7 0 Cane Harvester (NW S.N > 06006) T7 0 Cane Harvester (NW S.N 06007>) T7 TEL , , FAX 0.9.0

9 Agricultural Equipment MODEL DESCRIPTION COMMENTS PAGE 0 Cane Harvester (T8 S.N ) T7 0 Cane Harvester (T8 S.N ) T7 0 Farm Tractor T8 0 Farm Tractor T 0 Farm Tractor T 60 Farm Tractor * T9/T0 60 Farm Tractor T0 80 Windrower T7 000 Farm Tractor T 00 Farm Tractor * T/T 00 Farm Tractor * T/T 00 Farm Tractor * T/T 00 Farm Tractor * T/T 00 Farm Tractor 6.9 Eng T7/T8 00 Farm Tractor T 00 Farm Tractor T 00 Farm Tractor T8 0 Farm Tractor T 0 Farm Tractor T 0 Farm Tractor T8 0 Farm Tractor T0 Farm Tractor T 0 Combine * T6/T7 00 Combine T8 0 Farm Tractor * T7/T9 Farm Tractor T8 0 Farm Tractor T7 0 Farm Tractor * T9/T0 0 Farm Tractor T0 Farm Tractor T 0 Farm Tractor T6 0 Farm Tractor T9 Farm Tractor T 60 Farm Tractor T 60 Farm Tractor T6 60 Farm Tractor T7 60 Farm Tractor * T9/T0 60 Farm Tractor T0 700 Sprayer T7 7 Farm Tractor * T 760 Farm Tractor * T 80 Farm Tractor * T9/T 80 Farm Tractor T 890 Farm Tractor T67 89 Windrower T67 90 Sprayer T7 9 Farm Tractor T 960 Farm Tractor T 000 Farm Tractor T06 00 Farm Tractor T 0 Farm Tractor T6 00 Farm Tractor T07/T6 0 Farm Tractor T6 0 Farm Tractor * T6 0 Farm Tractor T6 00 Farm Tractor T07/T6 0/N Farm Tractor * T6 00 Farm Tractor T07/T6 00N Farm Tractor T6 0 Farm Tractor * T66 Equipment Application Chart WEB SITE: CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES MODEL DESCRIPTION COMMENTS PAGE Farm Tractor * T66/T67 0/N Farm Tractor T66 /N Farm Tractor T67 0 Farm Tractor * T6/T7 60 Farm Tractor T0 00 Farm Tractor T09 00N Farm Tractor T8 0 Farm Tractor * T66/T67 0N Farm Tractor T67 0/N Farm Tractor T67 /N Farm Tractor T Farm Tractor T6 6 Farm Tractor * T66/T67 6/N Farm Tractor T Farm Tractor T8 7 Farm Tractor * T66/T67 70 Forage Harvester * T9/T0 * T 7 Farm Tractor * T67 70 Forage Harvester * T0/T 600 Farm Tractor * T66/T Farm Tractor * T/T6 600 Farm Tractor T 60 Farm Tractor T66/T68 60L Farm Tractor T68 600/L Farm Tractor T8 60 Farm Tractor * T69 60 Farm Tractor * T8/T68 60L Farm Tractor T68 600/L Farm Tractor T8 60 Farm Tractor * T8 60L/S Farm Tractor T68 600/L Farm Tractor T 60 Farm Tractor T68 60/L/S Farm Tractor * T68 600/L Farm Tractor T 60 Farm Tractor * T Farm Tractor T 60 Farm Tractor * T69 60L Farm Tractor * T68 60S Farm Tractor T68 6 Farm Tractor * T69 60 Farm Tractor * T Farm Tractor * T 6600 Combine T/T7 660 Combine T/T0 660 Farm Tractor T Farm Tractor T68/T7 660 Farm Tractor * T66/T Forage Harvester * T7 66 Farm Tractor T7 660 Combine * T8/T9 * T0 66 Farm Tractor * T9/T0 660 Forage Harvester T Sprayer * T/T67 67 Farm Tractor * T Farm Tractor T Farm Tractor T6 700 Farm Tractor * T/T John Deere is the registered trademark of Deere & Co., Moline, IL. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. IT0

10 700 Forage Harvester * T7 70 Farm Tractor * T6/T7 700 Farm Tractor T6 70 Farm Tractor T7 70 Farm Tractor * T6/T7 70 Cotton Picker T9 7 Cotton Picker * T9/T * T 7 Cotton Picker T Cotton Picker T70 78 Cotton Picker * T/T 700 Forage Harvester T6 70 Farm Tractor T7 70 Farm Tractor T Farm Tractor T6 760 Farm Tractor T Combine * T/T Farm Tractor T 770 Combine T7 770 Combine * T9/T Farm Tractor T 780 Farm Tractor T7 780 Farm Tractor T7 790 Farm Tractor T7 800 Farm Tractor T/T7 800T Farm Tractor T7 80/T Farm Tractor T7 80/T Farm Tractor T7 800 Farm Tractor T/T7 800T Farm Tractor T7 80/T Farm Tractor T7 80/T Farm Tractor T7 800 Farm Tractor T/T7 800T Farm Tractor T7 80/T Farm Tractor T7 80/T Farm Tractor T7 800 Farm Tractor T7/T7 800T Farm Tractor T7 80/T Farm Tractor T7 80/T Farm Tractor T7 80 Farm Tractor * T9/T 80 Farm Tractor * T9/T 80 Farm Tractor * T9/T 80/T Farm Tractor T7 860 Farm Tractor * T 870 Farm Tractor * T 860 Farm Tractor ESN > 08 T7 860 Farm Tractor ESN T8 860 Farm Tractor ESN > T9 860 Farm Tractor ESN T8 860 Farm Tractor ESN > T9 860 Farm Tractor ESN T8 860 Farm Tractor ESN > T Combine T Combine * T9/T 8870 Farm Tractor T Farm Tractor T7/T7 90 Farm Tractor T7 900 Combine * T/T Equipment Application Chart Agricultural Equipment MODEL DESCRIPTION COMMENTS PAGE MODEL DESCRIPTION COMMENTS PAGE 900 * T6 90 Combine T7 900 Combine T 90 Combine T7 90 SH Combine T7 90 Combine T7 90 SH Combine T7 960 STS Combine T7 960 WTS Combine (S.N > 0800) T7 960i WTS Combine (S.N > 0800) T7 980 WTS Combine (S.N > 0800) T7/T7 980i WTS Combine (S.N > 0800) T Combine T 960 Combine T7 960 WTS Combine T7/T7 960i WTS Combine T7/T7 960 Combine T7 960 CTS Combine T7 960 STS Combine T Combine T CTS Combine T STS Combine T WTS Combine T7 9660i WTS Combine T WTS Combine T7 9680i WTS Combine T7 970 STS Combine T STS Combine T CTS Combine (S.N ) T CTS Combine (S.N >) T7 9780i CTS Combine (S.N >) T7 980i WTS Combine (S.N > 0800) T Cotton Picker * T9/T0 990 Cotton Picker * T9/T0 990 Cotton Picker * T9/T0 990 Cotton Picker * T/T 99 Cotton Picker T Cotton Picker * T9/T0 * T 990 Cotton Picker * T0/T 9960 Cotton Picker T 996 Combine T 9970 Cotton Picker T Cotton Picker T Cotton Picker T Cotton Picker T7 CTS Combine T7 CTS II Combine T7 CTS II Combine (S.N >) T7 CH0 Cane Harvester T7 SE600 Tractor T SE600 Tractor T8 SE600 Tractor T8 SE600 Tractor T SE60 Tractor T69 SE60 Tractor T69 IT0 TEL , , FAX 0.9.0

11 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES Equipment Application Chart Construction Equipment MODEL DESCRIPTION COMMENTS PAGE 70 Excavator T 70D Excavator * T/T6 0 Loader Backhoe T68 00LL/LC Excavator T7 0C Loader Backhoe T 0D Loader Backhoe T6 0LE Loader Backhoe T66 0LC Excavator T7 0LCR Excavator T67 E Wheel Loader T 0D Articulated D. Truck T7 70LC Excavator T7 90D Excavator * T/T6 00 Loader Backhoe * T0/T0 00A Loader Backhoe * T0/T0 00B Loader Backhoe T0 00D Loader Backhoe T8/T7 0 Loader Backhoe T0 0A Loader Backhoe * T0/T0 0 Loader Backhoe * T0/T0 0A Loader Backhoe * T0/T0 0 Loader Backhoe T0/T 0B Loader Backhoe T 0C Loader Backhoe * T/T6 * T7/T8 0D Loader Backhoe * T/T6 * T7 0E Loader Backhoe * T66/T67 0G Loader Backhoe T67 0SE/SG Loader Backhoe * T67 C Loader Backhoe * T/T6 * T7/T8 D Loader Backhoe * T6/T7 * T8 SE Loader Backhoe T67 SG Loader Backhoe T67 0C Excavator T7 0C LC Excavator T7 0LC Excavator T7 0LCR Excavator T7 E Wheel Loader * T0/T G Wheel Loader * T/T H Wheel Loader T67 0A Crawler Dozer * T0/T0 0B Crawler Dozer * T0/T0 * T0/T0 0C Crawler Dozer T0 0D Crawler Dozer T0/T06 D Crawler Dozer T06 70/C Excavator T7 00 Loader Backhoe * T0/T 00G Crawler Dozer * T/T6 0 Loader Backhoe T 0A Loader Backhoe T 0B Loader Backhoe T 0C Loader Backhoe T MODEL DESCRIPTION COMMENTS PAGE 0D Loader Backhoe T 0 Loader Backhoe T 0B Loader Backhoe T 0C Loader Backhoe * T9/T0 0C Loader Backhoe * T/T Loader Backhoe * T 0D Loader Backhoe * T0/T * T/T 0E/G Loader Backhoe T67 0J Loader Backhoe T67 B/C Loader Backhoe T C Wheel Loader T8 CH Wheel Loader T8 D Wheel Loader * T8/T9 T0/T T E Wheel Loader * T/T G Wheel Loader * T/T H Wheel Loader T68 TCH Wheel Loader T68 HCL Wheel Loader T68 0 Crawler Dozer T0 0A Crawler Dozer T 0B Crawler Dozer T 0C/D Crawler Dozer T 0E Crawler Dozer * T0/T * T/T 0G Crawler Dozer * T0/T * T/T * T68 0H Crawler Dozer * T66/T67 D Crawler Dozer T E Crawler Dozer * T0/T * T/T G Crawler Dozer * T0/T * T/T68 90 Excavator T 90D Excavator * T0/T 90E Excavator * T/T 9D Excavator * T0/T 9D Excavator * T/T 00 Loader Backhoe * T7/T8 * T9 00A Loader Backhoe * T7/T8 * T9/T0 00B Loader Backhoe T8/T9 T0 00C Loader Backhoe T8/T9 T0 0 Loader Backhoe T8/T9 T0 0B Loader Backhoe * T0/T 0C Loader Backhoe * T/T 0D Loader Backhoe * T B Loader Backhoe * T/T6 * T7/T8 John Deere is the registered trademark of Deere & Co., Moline, IL. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IT06

12 Construction Equipment MODEL DESCRIPTION COMMENTS PAGE 0B Loader T7 Loader T7 Wheel Loader * T/T A Wheel Loader * T7/T8 B Wheel Loader * T/T6 C Wheel Loader * T/T C Wheel Loader * T6 D Wheel Loader * T/T6 E/EH Wheel Loader * T/T G Wheel Loader * T/T H/HLL Wheel Loader T7 TCH Wheel Loader T7 0/A/B Crawler Dozer * T/T 0G Crawler Dozer * T/T * T68 0H Crawler Dozer * T66/T67 * T68 /A/B Crawler Dozer * T/T G Crawler Dozer * T/T * T68 70A Motor Grader * T7/T8 70B Motor Grader * T9/T0 * T/T 90D Excavator * T/T 9 Excavator * T 9D Excavator * T/T 600 Loader Backhoe * T 60B Loader Backhoe * T/T 60C Loader Backhoe * T/T 6E/EH/G Wheel Loader * T/T6 6H/HLL Wheel Loader T7 TC6H Wheel Loader T7 6 Wheel Loader T6 6A Wheel Loader T6 6B Wheel Loader T 6C Wheel Loader * T0/T 6D Wheel Loader T9 6E/ER Wheel Loader * T 6G Wheel Loader * T/T7 6GH Wheel Loader * T 6H Wheel Loader T7 6J Wheel Loader (S.N > 6) T7 60G Crawler Dozer * T/T * T68 60H Crawler Dozer * T66/T67 6A/B Crawler Dozer * T/T6 670A/B Motor Grader * T/T6 670C/CH Motor Grader * T70/T7 67A/B Motor Grader * T/T6 67CH Motor Grader * T70/T7 690 Excavator T6 690A Excavator T6 690B Excavator T7 690C Excavator * T0/T 690D/E Excavator * T/T6 698G Excavator T7 700 Loader Backhoe T 700A Loader Backhoe T 700H/J Crawler Dozer T70 IT07 Equipment Application Chart MODEL DESCRIPTION COMMENTS PAGE 70B Loader Backhoe * T8/T 70B Loader Backhoe * T 70C Loader Backhoe * T/T 70D Loader Backhoe T7 7J Wheel Loader T7 7E Wheel Loader T9 70/B Crawler Dozer * T/T6 7/A/B Crawler Dozer * T/T6 7BMIL Crawler Dozer * T/T6 760 Scraper T 760A Scraper T 76 Scraper * T8/T9 76A Scraper * T9/T0 76A Scraper * T 76B Scraper * T0/T T7 770 Motor Grader T 770A Motor Grader * T0/T 770A Motor Grader * T 770B Motor Grader * T0/T 770B Motor Grader * T 770BH Motor Grader T 770C Motor Grader (S.N > 89) T7 770C II Motor Grader (S.N 80 >) T7 770CH Motor Grader (S.N > 89) T7 770CH II Motor Grader (S.N 80 >) T7 770D Motor Grader T7 77A Motor Grader T 77B/BH Motor Grader T 77CH Motor Grader (S.N > 89) T7 77CH II Motor Grader (S.N 80 >) T7 77D Motor Grader T7 790D Excavator T0 790E Excavator * T/T6 79D Excavator T 79LC Excavator T 80 Crawler Dozer * T8/T9 80B Crawler Dozer * T0/T 80C Crawler Dozer T 80C Crawler Buldozer (S.N > 88) T7 80C-II Crawler Buldozer (S.N 88 >) T7 80G Crawler Dozer T7 80J Crawler Buldozer T7 8 Crawler Dozer * T8/T9 860B Scraper * T8/T9 86 Scraper * T8/T9 870D Motor Grader T7 87D Motor Grader T7 890/A Excavator * T8/T9 89D Excavator * T0/T 89E Excavator T 99D Excavator T9 99E Excavator T9 TEL , , FAX 0.9.0

13 Equipment Application Chart CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES Skidders, Feller Bunchers, Forklifts and Compactors MODEL DESCRIPTION COMMENTS PAGE 0 Skid Steer T6 0D Skidder * T0/T * T/T 80 Forktlift * T0/T0 0 Skidder * T0/T * T 0A Skidder T 0B Skidder * T/T 0C Skidder * T0/T * T/T 8D Skidder * T/T 80 Forktlift * T0/T 80A Forktlift T 80B/C Forktlift T 8C Forktlift T6 8E Forktlift T66 86E Forktlift T66 88E Forktlift T66 0 Skidder T 0A Skidder * T6/T7 0B Skidder T 0D Skidder T/T 0G/GLL Skidder T7 8D Skidder T/T 8G/II/III Skidder T7 60D Skidder T7 608L Feller Buncher (S.N >) T7 608S Feller Buncher (S.N 0BA ) T7 60 Skidder T 60G/II/III Skidder T7 60D Skidder * T/T6 60G Skidder T7 6 Feller Buncher * T/T6 6D Feller Buncher * T/T6 6G Feller Buncher T7 66 Compactor T6 66B Compactor * T6/T 66C Compactor T9 68G/II/III Skidder T7 68D Skidder * T/T6 68E Skidder T6 68G Skidder T7 6 Feller Buncher T6 660D Skidder T7 69C Feller Buncher T7 69D Feller Buncher * T/T6 70 Skidder T7 70A Skidder * T9/T 70E/G Skidder * T 70G Skidder (S.N > 668) T7 78E/G Skidder * T 78G Skidder (S.N > 668) T7 78G-II Skidder (S.N ) T7 78G-III Skidder (S.N 7660 >) T7 7G Feller Buncher (S.N ) T7 MODEL DESCRIPTION COMMENTS PAGE 7GL Track Harvester (S.N 000 >) T7 7J Feller Buncher T7 7JH Feller Buncher T7 79G Feller Buncher T7 79J Feller Buncher T7 79JH Feller Buncher T7 786G Skidder T7 8G Feller Buncher T7 88G Skidder T7 80 Feller Buncher (S.N >) T7 80J Log Loader T7 8G Feller Buncher (S.N 0008 >) T7 8J Feller Buncher T7 8JH Harvester T7 900 Feller Buncher (S.N 0000 >) T7 90G Feller Buncher (S.N 0000 >) T7 90J Feller Buncher T7 90JH Harvester T7 909J Feller Buncher T7 909JH Harvester T7 90 Feller Buncher (S.N >) T7 9G Feller Buncher (S.N 0000 >) T7 9J Feller Buncher T7 99J Feller Buncher T7 70D Wheeled Harvester (S.N ) T7 70D Wheeled Harvester (S.N ) T7 70D Forwarder (S.N > 000) T7 7D Clam Bunk T7 Logger T7 887 Skid Steer T6 * Other OEM Applications John Deere engines are used in many OEM applications. This is a list of the most common brands. Barber Greene Blaw Knox Cameco Dynapac Elgin Street Sweeper FMC Corporation Gardner Denver Ingersoll Rand Joy Manufacturing Koering Kohler Lion MFG Onan Generators Pavex Powell MFG Rex Works Roscoe Brown Sullair Corporation Choose proper engine for this application. In doubt call our Technical support line (800) -09. John Deere is the registered trademark of Deere & Co., Moline, IL. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IT08

14 IT09 TEL , , FAX 0.9.0

15 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series. >,76 O rings on liner Cyl. Model Bore:.86 in 98 mm Pin Ø:.8 in 0 mm ) Engine O/H ) Engine I/F ) TOK8 ) TIK8 Piston-Liner Main Bearing Thrust Bearing TPLK8 a) TT8 b) TAR706 c) TT8 d) TAR90 e) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use Block (m): T96, T69 Con Rod (m): T0007, R80 AGRICULTURAL CONSTRUCTION 00 00A 0A 0B 80 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 () ) TAT80 ) TT009 ) TR8 (T) ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE870 ) TRE888 ) TR9860 ) TR97 ) TR779 ) Con Rod ) TT7 X ) TR79 X6 () ) TAT800 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube ) TRE ) TRE99 () ) TRE97 ) TR98 ) TR7 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover 0 ) TRE70 80 F () ) TT60 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE907 TRE668 Injector, Pencil TAR896 Seal TR6076 TR8000 () Do not use with Flywheel Housing (m) T000, T99. () Do not use with Housing (m) R096, R707, R79. () Conversion TMX86: Available TT06 X Nipple TR9980 X Hose. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. For Additional JOHN DEERE Products Refer to Page T7 T0

16 00 Series Model.,766 > O rings on Block Cyl Bore:.86 in 98 mm Pin Ø:.8 in 0 mm Block (m): R0, R00, R7967, T9 Con Rod (m): T0007, R80 ) Engine O/H ) Engine I/F ) TOK9 ) TIK9 Piston-Liner Main Bearing Thrust Bearing TAR79 a) TT8 b) TAR706 c) TT8 d) TT0 e) TAR767 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use AGRICULTURAL CONSTRUCTION 00 00A 00B 0 0A 0A/B 80 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 () ) TAT80 ) TT009 ) TR8 (T) ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE870 ) TRE888 ) TR9860 ) TR97 ) TR779 ) Con Rod ) TT7 X ) TR79 X6 () ) TAT800 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube ) TRE ) TRE99 () ) TRE97 ) TR98 ) TR7 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE907 TRE668 Injector, Pencil TAR896 Seal TR6076 TR8000 () Do not use with Flywheel Housing (m) T000, T99. () Do not use with Housing (m) R096, R707, R79. () Conversion TMX86: Available TT06 X Nipple TR9980 X Hose. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. T0 For Additional JOHN DEERE Products Refer to Page T7

17 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.6 > 79,60 O rings on Liner Small Pin Cyl Bore:.0 in 0 mm Pin Ø:.8 in 0 mm Con Rod (m): T0007, R80 ) Engine O/H ) Engine I/F ) TOK0 ) TIK0 Piston-Liner Main Bearing Thrust Bearing TPLK0 a) TAR780 b) TAR79 c) TT69 d) TAR90 e) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use AGRICULTURAL 0 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) Con Rod ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear CONSTRUCTION 0 0A ) TAR679 ) TRE7 ) TAT80 ) TT009 ) TR8 (T) ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR779 ) TT7 X ) TR79 X6 () ) TAT800 ) TRE ) TRE99 () ) TRE97 ) TR98 ) TR7 ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAT708 (m) R8997, (m) R09 Injector, Pencil TAR896 Seal TR6076 TR8000 () Do not use with Housing (m) R096, R707, R79. () Conversion TMX86: Available TT06 X Nipple TR9980 X Hose. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. For Additional JOHN DEERE Products Refer to Page T7 T0

18 00 Series.6 > 79,60 O rings on Block Small Pin Cyl Model Bore:.0 in 0 mm Pin Ø:.8 in 0 mm Con Rod (m): T0007, R80 ) Engine O/H ) Engine I/F ) TOK9 ) TIK9 Piston-Liner Main Bearing Thrust Bearing TAR79 a) TAR780 b) TAR79 c) TT69 d) TR66 e) TAR768 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use AGRICULTURAL ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) Con Rod ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear CONSTRUCTION 0B ) TAR679 ) TRE7 ) TAT80 ) TT009 ) TR8 (T) ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR779 ) TT7 X ) TR79 X6 () ) TAT800 ) TRE ) TRE99 () ) TRE97 ) TR98 ) TR7 ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 () Do not use with Housing (m) R096, R707, R79. () Conversion TMX86: Available TT06 X Nipple TR9980 X Hose. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. Water Pump TAT708 (m) R8997, (m) R09 Injector, Pencil TAR896 Seal TR6076 TR8000 T0 For Additional JOHN DEERE Products Refer to Page T7

19 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.6 79,60 > O Rings on Block Large Pin Cyl Bore:.0 in 0 mm Pin Ø:.7 in mm AGRICULTURAL CONSTRUCTION 0A 0 0A 0 0B 0C 0D ) Engine O/H ) Engine I/F ) TOK0 ) TIK0 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 ) TAT80 ) TT009 ) TR8 (T) Piston-Liner Main Bearing Thrust Bearing TAR780 a) TAR7776 b) TAR79 c) TR7 d) TR66 e) TAR768 f ) TM09 ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR779 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod TRE7.00 TRE TRE Use ) TR67 X ) TR79 X6 ) TRE69 () TAT9 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube ) TRE ) TRE99 () ) TRE97 ) TR98 ) TR7 TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAT708 (m) R8997, (m) R09 () Do not use with Housing (m) R096, R707, R79. () Conversion TMX86 Consists of TT06 X Nipple TR9980 X Hose. () For Connecting Rods RE69 and RE076 Use Connecting Rod Bolt TR800. Transmission Oil Pump TAL006 Verify P/N for your application ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TAR896 For Additional JOHN DEERE Products Refer to Page T7 T0

20 00 Series Model.79D Cyl Bore: Pin Ø:.9 in 06 mm.7 in mm ) Engine O/H ) Engine I/F ) TRE76 ) TIK76 Piston-Liner Main Bearing Thrust Bearing TRE00 a) TRE98 b) TRE6680 c) TR7 d) TR68 e) TAR607 f ) TM09 TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use AGRICULTURAL CONSTRUCTION 0D D 6 7 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT80 () ) TT009 ) TR8 (T) 6) TR8989 7) TH Valve, Intake TR796 TR TR ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR779 Valve, Exhaust TR796 TR TR ) Con Rod ) TR67 X ) TR800 X6 ) TRE69 Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 6 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw ) TRE ) TRE99 () ) TRE97 ) TR98 ) TR7 6) TR86 X () 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Guide, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAR97708 (m) R760 TRE6089 (m) R7886, (m) R707 (m) R008, (m) R77 (m) R798, (m) R6 () Crankshaft (m) T6 (6 mm /.7 Snout.) This engine may use TRE0979 (60 mm /.6 Snout) (m) R98. () Do not use with Housing (m) R096, R707, R79. For Saran Repower Engines use TRE6. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Use on engines ESN 799, after this ESN use TRE6767. Transmission Oil Pump ) Seal TAL006 TAL6809 ) Injector, Pencil ) TR6076 TR8000 Verify P/N for your application ) TAR896 T06 For Additional JOHN DEERE Products Refer to Page T7

21 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 09D Liter Designated Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm Con Rod (m): R77, R800 AGRICULTURAL ) Engine O/H ) Engine I/F ) TRE76 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE0979 ) TT009 () ) TR8 (T) 6) TR8989 7) TH Piston-Liner Main Bearing Thrust Bearing TRE00 a) TRE98 b) TRE6680 c) TR7 d) TR68 e) TAR607 f ) TM09 ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR06796 () or TR779 () TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod TRE7.00 TRE TRE Use ) TR67 X ) TR800 X6 ) TRE69 TAT9 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Pump, Oil Tube ) Cyl Hd Cap Screw ) TRE ) TRE6767 ) TR7 ) TR86 X () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () Valve, Intake TR9806 TR Valve, Exhaust TR9069 TR979.0 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR7 TR990 O/S ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Thermostat ) Thermostat Cover ) TRE6 80 F ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77 (m) R798, (m) R6 Injector, Pencil TRE696 Seal TR6076 TR8000 () Not included in Gasket. Used in Saran Engines (Order Separately). () Reusable. () Helicoidal Gears. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. For Additional JOHN DEERE Products Refer to Page T7 T07

22 00 Series Model.79T Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm ) Engine O/H ) Engine I/F ) TOK ) TIK Piston-Liner Main Bearing Thrust Bearing TRE a) TRE978 b) TRE6680 c) TR0 d) TR68 e) TAR607 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use AGRICULTURAL NCS NTSS 6 7 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) Con Rod 6 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAR679 ) TRE7 ) TAT80 () ) TT009 ) TR8 (T) 6) TR8989 7) TH ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR779 ) TR7 X ) TR800 X6 ) TRE87 ) TRE ) TRE99 () ) TRE97 ) TR98 ) TR7 6) TR86 X () ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake TR807 TR89.00 TR89.0 Valve, Exhaust TR796 TR TR Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77 (m) R798, (m) R6 Injector, Pencil TRE70 Seal TR6076 TR8000 () Do not use with Housing (m) R096, R707, R79. For Saran Repower Engines use TRE6. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Crankshaft (m) T6 (6 mm /.7 Snout.) This engine may use TRE0979 (60 mm /.6 Snout) (m) R98. () Use on engines ESN 799, after this ESN use TRE6767. T08 For Additional JOHN DEERE Products Refer to Page T7

23 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 09T Liter Designated Cyl Bore: Pin 0.9 in 06. mm.6 in mm Con Rod (m): R800, R8979, R6 ) Engine O/H ) Engine I/F ) TOK ) TIK 6 7 ) Front Seal AGRICULTURAL ) Rear Seal 00 ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE0979 ) TT009 ) TR8 (T) 6) TR8989 7) TH Piston-Liner Main Bearing Thrust Bearing TRE a) TRE978 b) TRE6680 c) TR0 d) TR68 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR06796 () or TR779 () TRE7 TRE7.00 TRE TRE Use ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) TR7 X ) TR800 X6 ) TRE87 TAT9 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Pump, Oil Tube ) Cyl Hd Cap Screw ) TRE ) TRE6767 ) TR7 ) TR86 X () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () Valve, Intake TR9806 TR Valve, Exhaust TR9069 TR979.0 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR7 TR990 O/S ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Thermostat ) Thermostat Cover 0 ) TRE6 80 F ) TT60 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77 (m) R798, (m) R6 Injector, Pencil TRE8087 Seal TR6076 TR8000 () Not included in Gasket. Used in Saran Engines (Order separately). () Reusable. () Helicoidal Gears. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. For Additional JOHN DEERE Products Refer to Page T7 T09

24 00 Series Model.0 > 8,7 O rings on liner Cyl Bore:.86 in () 98 mm Pin Ø:.8 in 0 mm Block (m): T06, T96, T69 AGRICULTURAL 00 0 CONSTRUCTION ) Engine O/H ) Engine I/F ) TOK8 ) TIK8 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 () ) TAT800 ) TT009 ) TR8 (T) Valve, Intake Piston-Liner Main Bearing Thrust Bearing TPLK8 a) TT8 b) TAR706 c) TT8 d) TAR90 e) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE88 ) TRE887 ) TR986 ) TR97 ) TR7 Valve, Exhaust TRE7 Insert, Valve ) Intake ) Exhaust TRE7.00 TRE TRE ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft Use 6 / 8 7 ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Bal. Shaft Stop 8) Con Rod ) TT7 X ) TR79 X8 () ) TR760 X6 (6) ) TRE68 R/H ) TRE68 L/H 6) TR880 () 7) TR88 8) TAT800 TAT9 ) TRE ) TRE99 ) TRE97 ) TR987 ) TR7 ) Cap, Valve ) Lock, Valve TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE907 TRE668 Injector, Pencil TAR896 Seal TR6076 TR8000 () Do not use with Flywheel Housing (m) T000, T99. () Always verify Bore diameter, on Block Replacement is.06 /0mm. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Do not use with Housing (m) R096, R707, R79. T0 () Threaded Type. (6) TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. For Additional JOHN DEERE Products Refer to Page T7

25 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.0 8,8 > O rings on block Cyl Bore:.86 in () 98 mm Pin Ø:.8 in 0 mm ) Engine O/H ) Engine I/F ) TOK9 ) TIK9 Piston-Liner Main Bearing Thrust Bearing TAR79 a) TT8 b) TAR706 c) TT8 d) TT0 e) TAR767 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use Block (m): R0, R0, R0 R797, T AGRICULTURAL CONSTRUCTION ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 () ) TAT800 ) TT009 ) TR8 (T) Valve, Intake ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE88 ) TRE887 ) TR986 ) TR97 ) TR7 Valve, Exhaust 6 / ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Bal. Shaft Stop 8) Con Rod ) TT7 X ) TR79 X8 () ) TR760 X6 (6) ) TRE68 R/H ) TRE68 L/H 6) TR880 () 7) TR88 8) TAT800 Insert, Valve ) Intake ) Exhaust 8 7 ) TRE ) TRE99 ) TRE97 ) TR987 ) TR7 ) Cap, Valve ) Lock, Valve ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE907 TRE668 Injector, Pencil TAR896 Seal TR6076 TR8000 () Do not use with Flywheel Housing (m) T000, T99. () Always verify Bore diameter, on Block Replacement is.06 /0mm. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Do not use with Housing (m) R096, R707, R79. () Threaded Type. (6) TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. For Additional JOHN DEERE Products Refer to Page T7 T

26 00 Series Model.9 > 7,8 O Rings on liner Small Pin Cyl Bore:.0 in 0 mm Pin Ø:.8 in 0 mm Block (m): T69 Con Rod (m): T0007, R80 AGRICULTURAL 0 CONSTRUCTION 0A ) Engine O/H ) Engine I/F ) TOK0 ) TIK0 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 ) TAT800 ) TT009 ) TR8 (T) Valve, Intake Piston-Liner Main Bearing Thrust Bearing TPLK0 a) TAR780 b) TAR79 c) TT69 d) TAR90 e) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE079 ) TRE88 ) TR86 ) TR97 ) TR7 Valve, Exhaust TRE7 6 / Insert, Valve ) Intake ) Exhaust 8 7 TRE7.00 TRE TRE Use ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Bal. Shaft Stop 8) Con Rod ) TT7 X ) TR79 X8 () ) TR760 X6 () ) TRE68 R/H ) TRE68 L/H 6) TR880 () 7) TR88 8) TAT800 TAT9 ) TRE ) TRE99 ) TRE97 ) TR987 ) TR7 ) Cap, Valve ) Lock, Valve TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAT708 (m) R8997, (m) R09 Injector, Pencil TAR896 Seal TR6076 TR8000 () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Do not use with Housing (m) R096, R707, R79. () Threaded Type. () TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. T For Additional JOHN DEERE Products Refer to Page T7

27 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.9 > 7,8 O Rings on block Small Pin Cyl Bore:.0 in 0 mm Pin Ø:.8 in 0 mm Block (m): T Con Rod (m): T0007, R80 AGRICULTURAL CONSTRUCTION 0 0A 0 0B 0A 0B 80A ) Engine O/H ) Engine I/F ) TOK9 ) TIK9 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 ) TAT800 ) TT009 ) TR8 (T) Piston-Liner Main Bearing Thrust Bearing TAR79 a) TAR780 b) TAR79 c) TT69 d) TR66 e) TAR768 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE079 ) TRE88 ) TR86 ) TR97 ) TR7 TRE7 6 / 8 7 TRE7.00 TRE TRE Use ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Bal. Shaft Stop 8) Con Rod ) TT7 X ) TR79 X8 () ) TR760 X6 () ) TRE68 R/H ) TRE68 L/H 6) TR880 () 7) TR88 8) TAT800 TAT9 ) TRE ) TRE99 ) TRE97 ) TR987 ) TR7 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F () ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAT708 (m) R8997, (m) R09 Injector, Pencil TAR896 Seal TR6076 TR8000 () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Do not use with Housing (m) R096, R707, R79. () Threaded Type. () TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. For Additional JOHN DEERE Products Refer to Page T7 T

28 00 Series Model.9 7,8 > O Rings on block Large Pin Cyl () Bore:.0 in 0 mm Pin Ø:.7 in mm ) Engine O/H ) Engine I/F ) TAT8698 ) TIK8698 Piston-Liner Main Bearing Thrust Bearing TAR780 a) TAR7776 b) TAR79 c) TR7 d) TR66 e) TAR768 f ) TM09 TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use Con Rod (m): R77, R800 AGRICULTURAL CONSTRUCTION 0/B 0C/D 0B/C/D D 0/B 80B/C 0B 0B ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 ) TAT800 ) TT009 ) TR8 (T) Valve, Intake Valve, Exhaust 6 / ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE079 ) TRE88 ) TR86 ) TR97 ) TR7 Insert, Valve ) Intake ) Exhaust 8 7 ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Bal. Shaft Stop 8) Con Rod ) TR67 X ) TR79 X8 () ) TR760 X6 () ) TRE68 R/H ) TRE68 L/H 6) TR880 () 7) TR88 8) TRE69 ) Cap, Valve ) Lock, Valve ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube ) TRE ) TRE99 ) TRE97 ) TR987 ) TR7 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover 0 ) TRE70 80 F () ) TT60 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAT708 (m) R8997, (m) R09 Injector, Pencil TAR896 Seal TR6076 TR8000 () Some of these engines maybe turbocharged. () For Connecting Rods RE69 and RE076 Use Connecting Rod Bolt R800. () Do not use with Housing (m) R096, R707, R79. () Threaded Type. () TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. T For Additional JOHN DEERE Products Refer to Page T7

29 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.9D Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm AGRICULTURAL CS CS CONSTRUCTION 70 00G 70D B 0C C E 90 90D B 0C/D C ) Engine O/H ) Engine I/F ) TAT8699 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT800 () or TRE08 () ) TT009 ) TR8 (T) 6) TR8989 7) TH Valve, Intake TR796 TR TR Piston-Liner Main Bearing Thrust Bearing TRE00 a) TRE98 b) TRE6680 c) TR7 d) TR68 e) TAR607 f ) TM09 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE079 ) TRE88 ) TR86 ) TR97 ) TR7 Valve, Exhaust TR796 TR TR TRE7 TRE7.00 TRE TRE Use 6 / 8 7 ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Bal. Shaft Stop 8) Con Rod ) TR67 X ) TR800 X8 () ) TR760 X6 () ) TRE68 R/H(*) ) TRE68 L/H (*) 6) TR880 () 7) TR88 8) TRE69 Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 TAT9 6 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw ) TRE ) TRE99 ) TRE97 ) TR987 ) TR7 6) TR86 X8 (6) TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TRE70 80 F ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 Water Pump TAR97708 (m) R760 (*) If these engines use bolt on weights shafts use TAR6970 RH and TAR697 LH. () TAT800 Crankshaft 6mm (short) snout, (m) T7. () TRE08 Crankshaft 60mm (long) snout, (m) R899 or R08. () For Connecting Rod (m) R8979, use TR79 Connecting Rod Bolt available upon request. () Threaded Type. For Additional JOHN DEERE Products Refer to Page T7 Transmission Oil Pump ) Seal TAL006 TAL6809 ) Injector, Pencil ) TR6076 TR8000 Verify P/N for your application ) TAR896 () TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. (6) Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. T

30 00 Series Model 09D Liter Designated Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm ) Engine O/H ) Engine I/F ) TAT8699 ) TIK8699 Piston-Liner Main Bearing Thrust Bearing TRE00 a) TRE98 b) TRE6680 c) TR7 d) TR68 e) TAR607 f ) TM09 TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use AGRICULTURAL 600 (Mercosur) CONSTRUCTION 70D C/D 0D 00G 90D 8C 0C/D B 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT800 or TRE08 ) TT009 ) TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE079 ) TRE88 ) TR86 ) TR97 ) TR7 or TR06796 () Valve, Exhaust TR9069 TR / ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Con Rod 7 ) TR67 X ) TR800 X8 ) TR760 X6 () ) TRE68 R/H(*) ) TRE68 L/H (*) 6) TR880 (8) 7) TRE69 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S. ) TR8687 TR990 O/S. ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Pump, Oil ) Oil Cooler ) Pump, Oil Tube ) Cyl Hd Cap Screw ) TRE () ) TRE99 ) TR7 ) TR86 X8 () 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT (6) ) TT6 ) TAT8009 (6) ) TT00 ) TT007 6) TT0070 (6) ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Thermostat ) Thermostat Cover ) TAR F () ) TT60 0 Fuel Transfer Pump TRE TRE8009 (7) Water Pump Rep a) Without Impeller b) With Impeller a) TRE907 b) TRE668 (*) If these engines use bolt on weights shafts use TAR6970 RH and TAR697 LH. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () May use High cap. Pump, Oil TRE680. () O ring not included in Gasket. Used in Saran Engines. Order separately. () TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77, (m) R798, (m) R6 Injector, Pencil TRE696 Seal TR6076 TR8000 () Saran engines may use TRE6. (6) Helicoidal Gears. (7) Saran Engines. (8) Threaded Type. For Late 09 models TRE90 (Camshaft, and Tappets) is available. T6 For Additional JOHN DEERE Products Refer to Page T7

31 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.9T Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm Con Rod (m): R800, R6, R9 AGRICULTURAL CS/TSS N 0 TSS CONSTRUCTION 0 C/D (Turbo) C/D (Turbo) B ) Engine O/H ) Engine I/F ) TRE709 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT800 () or TRE08 () ) TT009 ) TR8 (T) 6) TR8989 7) TH Valve, Intake TR807 TR89.00 TR89.0 Piston-Liner Main Bearing Thrust Bearing TRE a) TRE978 b) TRE6680 c) TR0 d) TR68 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE079 ) TRE88 ) TR86 ) TR97 ) TR7 Valve, Exhaust TR796 TR TR TRE7 TRE7.00 TRE TRE Use 6 / ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft 8 7 ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft 7) Bal. Shaft Stop 8) Con Rod ) TR7 X ) TR800 X8 ) TR760 X6 () ) TRE68 R/H(*) ) TRE68 L/H (*) 6) TR880 () 7) TR88 8) TRE87 Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 TAT9 6 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw ) TRE () ) TRE99 ) TRE97 ) TR987 ) TR7 6) TR86 X8 (6) TRE78 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 TRE79.00 TRE78.00 TRE76.00 Use ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TAR F ) TT60 0 Fuel Transfer Pump TRE Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 (*) If these engines use bolt on weights shafts use TAR6970 RH and TAR697 LH. () TAT800 Crankshaft 6mm (short) snout, (m) T7. () May use High Capacity Pump, Oil TRE680. () TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. Water Pump TAR97708 (m) R760 Transmission Oil Pump TAL006 For Additional JOHN DEERE Products Refer to Page T7 TAL6809 Verify P/N for your application () TRE08 Crankshaft 60mm (long) snout, (m) R899 or R08. () Threaded Type. (6) Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE70 T7

32 00 Series Model 09T Liter Designated Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm Con Rod (m): R800,R9, R6 AGRICULTURAL 00N L L SE SE600 CONSTRUCTION 00D (Turbo) 0C (Turbo) C/D (Turbo) B ) Engine O/H ) Engine I/F ) TRE709 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT800 or TRE08 ) TT009 ) TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR Piston-Liner Main Bearing Thrust Bearing TRE a) TRE978 b) TRE6680 c) TR0 d) TR68 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE079 ) TRE88 ) TR86 ) TR97 ) TR7 or TR06796 () Valve, Exhaust TR9069 TR979.0 TRE7 TRE7.00 TRE TRE Use ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Camshaft ) Con Rod ) TR7 X ) TR800 X8 ) TR760 X6 () ) TR880 (8) ) TRE87 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S TAT9 6 ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw ) TRE () ) TRE99 ) TRE97 ) TR987 ) TR7 6) TR86 X8 () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT (6) ) TT6 ) TAT8009 ) TT00 (6) ) TT007 6) TT0070 (6) ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Thermostat ) Thermostat Cover 0 ) TAR F () ) TT60 Fuel Transfer Pump TRE TRE8009 (7) Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Saran engines, O ring not included in Gasket. Order separately. () May use High Capacity Pump, Oil TRE680. () TR9708 (Outer Diam..00 mm / in ) Larger and TR760R (Inner Diam 0. mm / 0.00 in ) Smaller, are also available. T8 Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77, (m) R798, (m) R6, Water Pump TRE7 ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE8087 () Saran Engines may use TRE6. (6) Helicoidal Gears. (7) Saran Engines. (8) Threaded Type. For Late 09 models TRE90 (Camshaft, and TR987 Bushing) is available. For Additional JOHN DEERE Products Refer to Page T7

33 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.76D Small Pin Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm ) Engine O/H ) Engine I/F ) TAT86990 ) TIK86990 Piston-Liner Main Bearing Thrust Bearing TRE98 a) TAR6 b) TRE6680 c) TR7 d) TR8000 e) TAR607 f ) TM09 TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TAR977 TAR TAR TAR Use AGRICULTURAL CONSTRUCTION 0C 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE679 ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR796 TR TR ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE068 ) TRE88 ) TR86 ) TR97 ) TR7 Valve, Exhaust TR796 TR TR / ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft ) TR70 X ) TR79 X8 ) TR760 X6 ) TAR6970 R/H ) TAR697 L/H 6) TR880 () Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 ) TRE680 () ) TRE86 () ) TRE97 ) TR987 ) TR86 X8 () ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Cyl Hd Cap Screw 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TAR F ) TT60 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE907 TRE668 Injector, Pencil TRE70 Seal TR6076 TR8000 () This engine may use standard flow Pump, Oil TRE. () Threaded Type. () From ESN 78 Replace all R788 Cap Screws withflanged Head Cap Screw TR86. () Always verify Oil Cooler type. For Additional JOHN DEERE Products Refer to Page T7 T9

34 00 Series Model.76D Large Pin Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm ) Engine O/H ) Engine I/F ) TRE669 ) TIK669 Piston-Liner Main Bearing Thrust Bearing TRE8966 a) TRE899 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TAR977 TAR TAR TAR Use CONSTRUCTION 0D E/G E 90D 0C/D 9D 0C 0B 0E/G 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE679 ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR796 TR TR Valve, Exhaust 6 / ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE068 ) TRE88 ) TR86 ) TR97 ) TR7 TR796 TR TR ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft ) TR7 X ) TR79 X8 ) TR760 X6 ) TAR6970 R/H ) TAR697 L/H 6) TR880 () Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 ) TRE680 () ) TRE86 () ) TRE97 ) TR987 ) TR86 X8 () ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Cyl Hd Cap Screw 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TAR F ) TT60 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE907 TRE668 () This engine may use standard flow Pump, Oil TRE. () Threaded Type. () From ESN 78 Replace all R788 Cap Screws withflanged Head Cap Screw TR86. () Always verify Oil Cooler type. T0 Injector, Pencil TRE70 For Additional JOHN DEERE Products Refer to Page T7 Seal TR6076 TR8000

35 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 0D Liter Designated Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm ) Engine O/H ) Engine I/F ) TRE669 ) TIK669 Piston-Liner Main Bearing Thrust Bearing TRE8966 a) TRE899 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TAR977 TAR TAR TAR Use AGRICULTURAL 600 SE600 CONSTRUC- TION0D E E 90D 0C/D 9D 0C 0B 0E/G 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE679 (*) ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE068 ) TRE88 ) TR86 ) TR97 ) TR7 Valve, Exhaust TR9069 TR979.0 ) Camshaft ) TR7 X ) TR79 X8 ) TR760 X6 ) TR880 () Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Cyl Hd Cap Screw ) TRE680 () ) TRE99 (6) ) TRE97 ) TR987 ) TR86 X8 () 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Thermostat ) Thermostat Cover ) TAR F () ) TT60 0 Fuel Transfer Pump TRE TRE8009 () Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 (*) Crankshaft (m) R0. This Engines model may also use crankshaft TRE88 60mm Snout; (m) R908, R0009. PLEASE VERIFY. () Saran engines use TRE Standard flow. () Saran engines may use TRE6. () Saran Engines. Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77, (m) R798, (m) R6 For Additional JOHN DEERE Products Refer to Page T7 Water Pump TRE7 ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE8087 () Threaded Type. For Late 09 models TRE90 (Camshaft, Tappets and TR987 Bushing) is available. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. (6) Always verify Oil Cooler Type. T

36 00 Series Model.76T Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm ) Engine O/H ) Engine I/F ) TRE66 ) TIK66 Piston-Liner Main Bearing Thrust Bearing TRE07 a) TRE869 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TAR977 TAR TAR TAR Use CONSTRUCTION 0D 0C G 0D 0C/D (T) 8D 0C 0/A/B/G E/G /A/B/G 8D 90D 0E/G 9 E/G 9D 90E 60B/C 9D 60G 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE679 ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake Valve, Exhaust () TR807 TR89.00 TR / ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE068 ) TRE88 ) TR86 ) TR97 ) TR7 TR796 TR TR ) Bal. Shaft R/H ) Bal. Shaft L/H 6) Camshaft ) TR7 X ) TR79 X8 ) TR760 X6 ) TAR6970 R/H ) TAR697 L/H 6) TR880 () Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Cyl Hd Cap Screw ) TRE680 () ) TRE86 () ) TRE97 ) TR987 ) TR86 X8 () 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 ) Thermostat ) Thermostat Cover ) TAR F ) TT60 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE90 TRE8 () This engine may use Standard Flow Pump, Oil TRE. 0 () Do not use Valves with RE6 Head. () Threaded Type. () From ESN 78 Replace all R788 Cap Screws withflanged Head Cap Screw TR86. T Injector, Pencil TRE70 () Always verify Oil Cooler Type. For Additional JOHN DEERE Products Refer to Page T7 Seal TR6076 TR8000

37 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 0T Liter Designated Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm ) Engine O/H ) Engine I/F ) TRE66 ) TIK66 Piston-Liner Main Bearing Thrust Bearing TRE07 a) TRE869 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR TRE7 TRE7.00 TRE TRE Use TAT9 TAT.00 TAT.00 TAT6.00 Use TAR977 TAR TAR TAR Use AGRICULTURAL L 600L SE600 CONSTRUCTION 0D 0C G 0D 0C/D (T) 0D 0C 8D E/G 0/A/B/G 8D /A/B/G 0E/G 90D E/G 9D 90E 60B/C 9D 60G 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE679 (*) ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal. Shaft ) Camshaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE068 ) TRE88 ) TR86 ) TR97 ) TR7 Valve, Exhaust TR9069 TR979.0 ) TR7 X ) TR79 X8 ) TR760 X6 ) TR880 () Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S. ) TR8687 TR990 O/S. ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Cyl Hd Cap Screw ) TRE680 () ) TRE99 (6) ) TRE97 ) TR987 ) TR86 X8 () 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Thermostat ) Thermostat Cover ) TAR F () ) TT60 0 Fuel Transfer Pump TRE TRE8009 () Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 (*) Crankshaft (m) R0. This Engines model may also use crankshaft TRE88 60mm Snout; (m) R908, R0009. PLEASE VERIFY. () Saran engines use TRE Standard flow. () Saran engines may use TRE6. () Saran engines Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77, (m) R798, (m) R6 () Threaded Type. For Late 09 models TRE90 (Camshaft, Tappets and TR987 Bushing) is available. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. (6) Always verify Oil Cooler Type. For Additional JOHN DEERE Products Refer to Page T7 Water Pump TRE7 ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE8087 T

38 00 Series Model 6.0 > 8,97 O rings on Liner 6 Cyl Bore:.86 in 98 mm Pin Ø:.8 in 0 mm ) Engine O/H ) Engine I/F ) TOK68 ) TIK68 Piston-Liner Main Bearing Thrust Bearing TPLK8 a) TT8 b) TAR706 c) TT8 d) TAR90 e) TR TRE7 TRE7.00 TRE TRE Use 6 TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 Block (m): T967, T968 Con Rod (m): T0007, R80 CONSTRUCTION ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) Camshaft ) Con Rod ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAR679 ) TRE7 () ) TAT6 ) TT009 ) TR8 (T) ) TRE868 ) TRE87 ) TR986 ) TR97 ) TR778 ) TT7 X6 ) TR79 X () ) TR88 () ) TAT800 ) TRE ) TRE99 ) TRE97 ) TR986 ) TR7 ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostats TAR F (*) 0 TAR77 9 F (*) 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE90 TMX Injector, Pencil TAR896 Seal TR6076 TR8000 (*) Verify JD parts manual. () Do not use with flywheel housing (m) T000,T99. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Threaded Type. T For Additional JOHN DEERE Products Refer to Page T7

39 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.0 8,976 > O rings on Block 6 Cyl Bore:.86 in 98 mm Pin Ø:.8 in 0 mm Block (m): R60, R0, R R7970, R7980, T6 Con Rod (m): T0007, R80 AGRICULTURAL 0 CONSTRUC- TION0 ) Engine O/H ) Engine I/F ) TOK69 ) TIK69 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 () ) TAT6 ) TT009 ) TR8 (T) Piston-Liner Main Bearing Thrust Bearing TAR79 a) TT8 b) TAR706 c) TT8 d) TT0 e) TAR767 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE868 ) TRE87 ) TR986 ) TR97 ) TR778 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) Con Rod TRE7.00 TRE TRE Use 6 ) TT7 X6 ) TR79 X () ) TR88 () ) TAT800 TAT9 ) TRE ) TRE99 ) TRE97 ) TR986 ) TR7 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube TRE78 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 TRE79.00 TRE78.00 TRE76.00 Use 6 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostats TAR F (*) 0 TAR77 9 F (*) 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE90 TMX Injector, Pencil TAR896 Seal TR6076 TR8000 (*) Verify JD parts manual. () Do not use with fly wheel housing (m) T000, T99. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Threaded Type. For Additional JOHN DEERE Products Refer to Page T7 T

40 00 Series Model 6.9 > 77,8 O rings on liner Small Pin 6 Cyl Bore:.0 in 0 mm Pin Ø:.8 in 0 mm Con Rod (m): T0007, R80 AGRICULTURAL CONSTRUCTION 0A ) Engine O/H ) Engine I/F ) TOK60 ) TIK60 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front ) TAR679 ) TRE7 ) TAT6 ) TT009 ) TR8 (T) 6) TR8989 Piston-Liner Main Bearing Thrust Bearing TPLK0 a) TAR780 b) TAR79 c) TT69 d) TAR90 e) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) Con Rod TRE7.00 TRE TRE Use 6 ) TT7 X6 ) TR79 X () ) TR88 () ) TAT800 TAT9 ) TRE ) TRE99 ) TRE97 ) TR986 ) TR7 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostats 0 TAR F (*) 0 TAR77 9 F (*) Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TMX998 TMX Injector, Pencil TAR896 Seal TR6076 TR8000 (*) Verify JD parts manual. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Threaded Type. T6 For Additional JOHN DEERE Products Refer to Page T7

41 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.9 > 77,8 O rings on block Small Pin 6 Cyl Bore:.0 in 0 mm Pin Ø:.8 in 0 mm Con Rod (m): T0007, R80 AGRICULTURAL CONSTRUCTION 0A A 70A ) Engine O/H ) Engine I/F ) TOK69 ) TIK69 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 ) TAT6 ) TT009 ) TR8 (T) Piston-Liner Main Bearing Thrust Bearing TAR79 a) TAR780 b) TAR79 c) TT69 d) TR66 e) TAR768 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 () ) TR778 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) Con Rod TRE7.00 TRE TRE Use 6 ) TT7 X6 ) TR79 X () ) TR88 () ) TAT800 TAT9 ) TRE ) TRE99 ) TRE97 ) TR986 ) TR7 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostats 0 TAR F (*) 0 TAR77 9 F (*) Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TMX998 TMX Injector, Pencil TAR896 Seal TR6076 TR8000 (*) Verify JD parts manual. () For Tractor Model 00 order TR97. () Use TR79 with C.Rod (m) T0007; use TR800 with C.Rod (m) R80. () Threaded Type. For Additional JOHN DEERE Products Refer to Page T7 T7

42 00 Series Model ,9 > O rings on block Large Pin 6 Cyl Bore:.0 in 0 mm Pin Ø:.7 in mm AGRICULTURAL CONSTRUCTION C D CH A 70A 70B ) Engine O/H ) Engine I/F ) TAT86986 ) TIK86986 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR679 ) TRE7 ) TAT6 ) TT009 ) TR8 (T) Piston-Liner Main Bearing Thrust Bearing TAR780 a) TAR7776 b) TAR79 c) TR7 d) TR66 e) TAR768 f ) TM09 ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 () ) TR778 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) Con Rod TRE7.00 TRE TRE Use 6 ) TR67 X6 ) TR79 X ) TR88 () ) TRE69 () TAT9 ) TRE ) TRE99 ) TRE97 ) TR986 ) TR7 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostats 0 TAR F (*) 0 TAR77 9 F (*) 0 TRE70 80 F (*) Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TMX998 (*) Verify JD manual. () For Tractor Model 00 order TR97. () Threaded Type. () For Connecting Rods RE69 and RE076 Use Connecting Rod Bolt TR800. TMX Injector, Pencil TAR896 T8 For Additional JOHN DEERE Products Refer to Page T7 Seal TR6076 TR8000

43 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.9D 6 Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm ) Engine O/H ) Engine I/F ) TRE078 ) TIK078 Piston-Liner Main Bearing Thrust Bearing TRE00 a) TRE98 b) TRE6680 c) TR7 d) TR68 e) TAR607 f ) TM09 TRE7 TRE7.00 TRE TRE Use 6 TAT9 TAT.00 TAT.00 TAT6.00 Use TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 AGRICULTURAL TSS CONSTRUCTION D 70B 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT6 ) TT009 ) TR88 (9T) 6) TR8989 7) TH ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 ) Camshaft ) Con Rod ) TR67 X6 ) TR800 X ) TR88 () ) TRE69 6 ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw ) TRE () ) TRE99 ) TRE97 ) TR986 ) TR7 6) TR86 X6 () 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR796 TR TR TR796 TR TR ) TR706 ) TR7 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat TAR F () 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () Saran engines may use TRE6. () Some Engines Models may use High Capacity Pump, Oil TRE680. () Threaded Type. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. Transmission Oil Pump TAL006 TAL6809 Verify P/N for your application For Additional JOHN DEERE Products Refer to Page T7 ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TAR896 T9

44 00 Series Model 609D Liter Designated 6 Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm AGRICULTURAL TSS CONSTRUCTION D 70B ) Engine O/H ) Engine I/F ) TRE078 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT6 ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR Piston-Liner Main Bearing Thrust Bearing TRE00 a) TRE98 b) TRE6680 c) TR7 d) TR68 e) TAR607 f ) TM09 ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 Valve, Exhaust TR9069 TR979.0 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) Con Rod TRE7.00 TRE TRE Use 6 ) TR67 X6 ) TR800 X ) TR88 (7) ) TRE69 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S TAT9 6 ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw ) TRE () ) TRE99 ) TRE97 () ) TR986 ) TR7 6) TR86 X6 () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Thermostat ) Thermostat Cover TAR F () T0 0 Fuel Transfer Pump TRE TRE8009 (6) Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Some of these engine models may use High Capacity Pump, Oil TRE680. () Saran engines may use TRE6. () Helicoidal Gears. Water Pump TAR97708 (m) R760 Transmission Oil Pump ) Seal ) Injector, Pencil TAL006 TAL6809 ) TR6076 TR8000 Verify P/N for your application ) TRE696 () To ESN (6) Saran Engines. (7) Threaded Type. For Additional JOHN DEERE Products Refer to Page T7

45 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.9T 6 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm AGRICULTURAL 0C CONSTRUCTION D E/EH/G 70B 70B/C ) Engine O/H ) Engine I/F ) TRE078 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT6 ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake Valve, Exhaust () TR807 TR89.00 TR89.0 Piston-Liner Main Bearing Thrust Bearing TRE a) TRE978 b) TRE6680 c) TR0 d) TR68 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 TR796 TR TR TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) Con Rod TRE7.00 TRE TRE Use 6 ) TR7 X6 ) TR800 X ) TR88 (6) ) TRE87 Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 TAT9 6 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Pump, Oil Tube 6) Cyl Hd Cap Screw ) TRE680 () ) TRE99 ) TRE97 () ) TR986 ) TR7 6) TR86 X6 () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 Thermostat TAR F () 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Saran engines may use TRE6. () Some Engine Models may use Standard Capacity Pump, Oil TRE. 0 () Do not use Valves with RE6 Head. Transmission Oil Pump TAL006 Verify P/N for your application () To ESN (6) Threaded Type. For Additional JOHN DEERE Products Refer to Page T7 ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE70 T

46 00 Series Model 609T Liter Designated 6 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm AGRICULTURAL 0C CONSTRUCTION D G/E/EH 70B 70B/C ) Engine O/H ) Engine I/F ) TRE078 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TAT6 ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR Piston-Liner Main Bearing Thrust Bearing TRE a) TRE978 b) TRE6680 c) TR0 d) TR68 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 Valve, Exhaust TR9069 TR979.0 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) Con Rod TRE7.00 TRE TRE Use 6 ) TR7 X6 ) TR800 X ) TR88 (6) ) TRE87 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S TAT9 ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Pump, Oil Tube ) Cyl Hd Cap Screw ) TRE680 () ) TRE99 ) TR7 ) TR86 X6 () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 Thermostat TAR F () 0 Fuel Transfer Pump TRE TRE8009 () Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Saran engines may use TRE6. () Some Engine Models may use Standard Capacity Pump, Oil TRE. Water Pump TAR97708 (m) R760 Water Pump TRE7 () Helicoidal Gears. () Saran Engines. (6) Threaded Type. Transmission Oil Pump TAL006 Verify P/N for your application ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE8087 T For Additional JOHN DEERE Products Refer to Page T7

47 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.D Large Pin 6 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm ) Engine O/H ) Engine I/F ) TOK69 ) TIK69 Piston-Liner TRE8966 a) TRE899 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR Main Bearing TRE7 TRE7.00 TRE TRE Use 6 Thrust Bearing TAT9 TAT.00 TAT.00 TAT6.00 Use TAR977 TAR TAR TAR Use 6 OEM Marine Ag CONSTRUCTION C 7 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE7 () ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR796 TR TR ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 Valve, Exhaust TR796 TR TR ) Camshaft ) TR7 X6 ) TR79 X ) TR88 () Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 ) Pump, Oil ) Oil Cooler Cover ) Rocker Arm ) Rocker Shaft ) Cyl Hd Cap Screw ) TRE680 ) TRE86 ) TRE97 ) TR986 ) TR86 X6 () 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 Thermostat TAR F 0 Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller TRE90 TRE8 Injector, Pencil TRE70 Seal TR6076 TR8000 () Crankshaft (m) R0. () Threaded Type. () From ESN 76> The Cylinder Head Cap Screw is. in ( mm) in Length. For Additional JOHN DEERE Products Refer to Page T7 T

48 00 Series Model 6068D Liter Designated Large Pin 6 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm AGRICULTURAL 606 OEM Marine Ag Construction ) Engine O/H ) Engine I/F ) TOK69 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE7 () ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR Piston-Liner Main Bearing Thrust Bearing TRE8966 a) TRE899 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 Valve, Exhaust TR9069 TR979.0 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft TRE7.00 TRE TRE Use 6 ) TR7 X6 ) TR79 X ) TR88 () Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S TAT9 ) TRE680 ) TR86 X6 () ) TRE86 ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Cyl Hd Cap Screw ) Oil Cooler Cover TAR977 TAR TAR TAR Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 Thermostat Fuel Transfer Pump Water Pump Repair 0 TRE6 80 F TRE Without Impeller TRE90 () Helicoidal Gears. () Threaded Type. () Crankshaft (m) R0. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. T With Impeller TRE8 Water Pump TRE7 For Additional JOHN DEERE Products Refer to Page T7 ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE8087

49 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.T 6 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm CONSTRUCTION B/C/D 690D 6E/EH/G 690D 60 69D 60D 70 6/D 70B 68D 7 6A/B 7A 670A/B 7B 67A 7BMIL 67B 790E ) Engine O/H ) Engine I/F ) TOK66 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE7 () ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake Valve, Exhaust () TR807 TR89.00 TR89.0 Piston-Liner Main Bearing Thrust Bearing TRE07 a) TRE869 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 TR796 TR TR TRE7 TRE7.00 TRE TRE Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft ) TR7 X6 ) TR79 X ) TR88 () Insert, Valve ) Intake ) Exhaust ) TR706 ) TR7 TAT9 ) Cap, Valve ) Lock, Valve ) TT09 ) TT0077 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm ) Rocker Shaft ) Cyl Hd Cap Screw ) TRE680 ) TRE86 ) TRE97 ) TR986 ) TR86 X6 () TAR977 TAR TAR TAR Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT ) TT6 ) TAT8009 ) TT00 ) TT007 6) TT0070 ) Spring, Valve ) Rotator, Valve ) O ring, Valve ) TR6 ) TRE0 ) TR8767 Thermostat 0 TAR F Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller See Chart on Page 8 Injector, Pencil TRE70 Seal TR6076 TR () Do not use Valves with RE6 Head. () Threaded Type. () Crankshaft (m) R0. () From ESN 76> The Cylinder Head Cap Screw is. in ( mm) in Length. For Additional JOHN DEERE Products Refer to Page T7 T

50 00 Series Model 6068T Liter Designated 6 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm AGRICULTURAL CONSTRUCTION B/C/D 67A/B 6E/EH/G 690D/E 60D 69D 6/D 70/B 68D 7 68E 7A/B 6 7BMIL 6A/B 790E 670A/B ) Engine O/H ) Engine I/F ) TOK66 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE7 () ) TT009 ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake TR9806 TR Piston-Liner Main Bearing Thrust Bearing TRE07 a) TRE869 b) TRE6680 c) TR0 d) TR8000 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE080 ) TRE88 ) TR7 ) TR97 ) TR778 Valve, Exhaust TR9069 TR979.0 TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Camshaft TRE7.00 TRE TRE Use 6 ) TR7 X6 ) TR79 X ) TR88 () Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S TAT9 ) TRE680 ) TR86 X6 () ) TRE86 ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Cyl Hd Cap Screw ) Oil Cooler Cover TAR977 TAR TAR TAR Use 6 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam. Follower 6) Cam. Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 Thermostat Fuel Transfer Pump Water Pump Repair TRE70 80 F 0 TRE Without Impeller With Impeller See Chart on Page 8 Water Pump TRE7 ) Seal ) Injector, Pencil ) TR6076 TR8000 ) TRE8087 () Helicoidal Gears. () Threaded Type. () Crankshaft (m) R0. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. T6 For Additional JOHN DEERE Products Refer to Page T7

51 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.70 > 80,000 Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm Block (m): R60, R60, R090 ) Engine O/H ) Engine I/F ) TRG7898 ) TIK7898 Piston-Liner Main Bearing Thrust Bearing TRE70 a) TRE7 b) TAR60 c) TR6 d) TR06 e) TAR607 f ) TH807 TAR78 TAR TAR TAR Use TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty TAR7 TAR TAR TAR Use AGRICULTURAL 00 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Cam Follower ) Plug, Camshaft CONSTRUCTION 00 00A ) TAR90 ) TRE006 ) TAR08 () c/s (m) R070 ) TR609 (T) ) TR88 (9T) ) TAR0 ) TAR0 ) TR66 ) TR797 ) TR099 X ) TR66 X8 ) TR690 X ) TR77 ) TR6 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Rotator, Ex ) Spring, Valve ) Guide, Valve ) O ring, Valve TR6 ES > 7,00 TR7 ES 7,00-80,000 TR6 ES > 7,00 TR7 ES 7,00-80,000 ) TR680 ) TR68 ) N/A ) N/A ) TR6 ) TR86 ) TR8767 Thermostat 0 TR F Fuel Transfer Pump TAR67 Water Pump Repair Without Impeller With Impeller See Chart on Page 8 Injector, Pencil TAR078 Seal TR6076 TR8000 () New style crankshaft. To adapt to old style center hole needs to be enlarged.8 in. ( mm). Extra bolt holes need to be plugged with Allen head screws and tread lock. For Additional JOHN DEERE Products Refer to Page T7 T7

52 00 Series Model.70 > 80,000 Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm Block (m): R660, R00, R080 ) Engine O/H ) Engine I/F ) TRG7899 ) TIK7899 Piston-Liner Main Bearing Thrust Bearing TRE7 a) TRE7 b) TAR60 c) TR6 d) TR00 e) TAR0 f ) TH807 TAR9 TAR9.00 TAR96.00 TAR97.00 Use TAR9 TAR98.00 TAR99.00 TAR90.00 Use TAR7 TAR TAR TAR Use AGRICULTURAL ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Cam Follower ) Plug, Camshaft CONSTRUCTION 00 00A 00B 00C 0 ) TAR90 ) TRE006 ) TAR08 () c/s (m) R070 ) TR609 (T) ) TR88 (9T) ) TAR0 ) TAR0 ) TR66 ) TR797 ) TR099 X ) TR66 X8 ) TR690 X ) TR6 ) TR6 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Rotator, Valve ) Spring, Valve ) Guide, Valve ) O ring, Valve TR6 ES > 7,00 TR7 ES 7,00-80,000 TR6 ES > 7,00 TR7 ES 7,00-80,000 ) TR680 ) TR68 ) N/A ) N/A ) TR6 ) TR86 ) TR8767 Thermostat TR F 0 Fuel Transfer Pump TAR67 or TRE Water Pump Repair Without Impeller With Impeller See Chart on Page 8 Injector, Pencil TAR078 Seal TR6076 TR8000 () New style crankshaft. To adapt to old style center hole needs to be enlarged.8 in. ( mm). Extra bolt holes need to be plugged with Allen head screws and tread lock. T8 For Additional JOHN DEERE Products Refer to Page T7

53 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model.70 > 80,000 Early Power Booster Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm ) Engine O/H ) Engine I/F ) TOK6 ) TIK6 Piston-Liner Main Bearing Thrust Bearing TPLK6 a) TRE6 b) TAR60 c) TR6 d) TR00 e) TAR0 f ) TH807 TAR9 TAR9.00 TAR96.00 TAR97.00 Use TAR9 TAR98.00 TAR99.00 TAR90.00 Use TAR7 TAR TAR TAR Use Block (m): R660, R00, R080 AGRICULTURAL ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Cam Follower ) Plug, Camshaft ) Head Bolt CONSTRUCTION 00 00A 00B 00C 0 ) TAR90 ) TRE006 ) TAR08 () c/s (m) R070 ) TR609 (T) ) TR88 (9T) ) TAR0 ) TAR0 ) TR66 ) TR797 ) TR099 X ) TR66 X8 ) TR690 X ) TR6 ) TR6 ) TMX6 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Rotator, Valve ) Spring, Valve ) Guide, Valve ) O ring, Valve TR6 ES > 7,00 TR7 ES 7,00-80,000 TR6 ES > 7,00 TR7 ES 7,00-80,000 ) TR680 ) TR68 ) N/A ) N/A ) TR6 ) TR86 ) TR8767 Thermostat 0 TR F Fuel Transfer Pump TAR67 or TRE Water Pump Repair Without Impeller With Impeller See Chart on Page 8 Injector, Pencil TAR078 Seal TR6076 TR8000 () New style crankshaft. To adapt to old style center hole needs to be enlarged.8 in. ( mm). Extra bolt holes need to be plugged with Allen head screws and tread lock. () TMX6 TR880 x, TR880 x, TR880 x6, TR880 x. For Additional JOHN DEERE Products Refer to Page T7 T9

54 00 Series Model.70 80,00 > Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm Block (m): R0700, R70, R80, R060, R77 AGRICULTURAL 00 CONSTRUCTION 00A 00B 00C 0 ) Engine O/H ) Engine I/F ) TRG7900 ) TIK ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front ) TAR90 ) TRE006 () ) TAR08 c/s (m) R070 ) TR609 (T) ) TR88 (9T) 6) TR66 Piston-Liner Main Bearing Thrust Bearing TRE6 a) TRE68 b) TAR60 c) TR6 d) TR06 e) TAR607 f ) TH807 ) TAR0 ) TAR0 ) TR89 ) TR797 TAR78 TAR TAR TAR Use ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TR099 X ) TR66 X8 ) TR690 X TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) Cam Follower ) Plug, Camshaft ) TR77 ) TR6 TAR7 TAR TAR TAR Use ) Head Bolt ) TMX6 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR88 TR00.00 TR00.0 TR679 TR TR788.0 ) TR680 ) TR68 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat 0 TR F Fuel Transfer Pump TRE Water Pump Repair Without Impeller With Impeller See Chart on Page 8 Injector, Pencil TAR078 Seal TR6076 TR8000 () New style crankshaft. To adapt to old style center hole needs to be enlarged.8 in. ( mm). Extra bolt holes need to be plugged with Allen head screws and tread lock. () TMX6 TR880 x, TR880 x, TR880 x6, TR880 x. T0 For Additional JOHN DEERE Products Refer to Page T7

55 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.0D >, Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm Block (m): () R6070, R80, R0, R0890, R0900 AGRICULTURAL ) Engine O/H ) Engine I/F ) TRG790 ) TIK790 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear Piston-Liner Main Bearing Thrust Bearing TRE7 a) TRE7 b) TAR60 c) TR6 d) TR00 e) TAR0 f ) TH807 ) Head Gasket ) Head Gasket ) Oil Pan Gasket TAR9 TAR9.00 TAR96.00 TAR97.00 Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam TAR9 TAR98.00 TAR99.00 TAR90.00 Use ) Cam Follower ) Plug, Camshaft ) O ring, Oil Cooler TAR7 TAR TAR TAR Use 6 ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) ) TAR66 ) TAR6 ) TR6 ) TR798 ) TR099 X6 ) TR66 X ) TR690 X ) TR6 ) TR6 ) TR7 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust Cap, Valve ) Spring, Valve ) Guide, Valve ) O ring, Valve TR6 ES > 8,80 TR7 ES 8,80-,999 TR6 ES > 8,80 TR7 ES 8,80-,999 ) TR680 ) TR68 N/A ) TR6 ) TR86 ) TR8767 Thermostat 0 Fuel Transfer Pump TR F () Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () Original Block. () ES > 8,80 use TAR67, ES 8,80-,6 use TRE, ES,66 > use TAR977. () TRE will require front key TR6 for the front damper. ) Injector, Pencil ) Injector Seals ) TAR078 ) TR6076 TR8000 Pump, Oil, Quad Transmission TAR99 For Tractors 00,00 For Additional JOHN DEERE Products Refer to Page T7 T

56 00 Series Model 6.0D >,999 6 Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm Block (m): () R090 AGRICULTURAL ) Engine O/H ) Engine I/F ) TRG790 ) TIK790 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear Piston-Liner Main Bearing Thrust Bearing TRE70 a) TRE7 b) TAR60 c) TR6 d) TR06 e) TAR607 f ) TH807 ) Head Gasket ) Head Gasket ) Oil Pan Gasket TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) Cam Follower ) Plug, Camshaft ) O ring, Oil Cooler TAR7 TAR TAR TAR Use 6 ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) ) TAR66 ) TAR6 ) TR6 ) TR798 ) TR099 X6 ) TR66 X ) TR690 X ) TR77 ) TR6 ) TR7 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust Cap, Valve ) Spring, Valve ) Guide, Valve ) O ring, Valve TR6 ES > 7,00 TR7 ES 7,00-80,000 TR6 ES > 8,80 TR7 ES 8,80-,999 ) TR680 ) TR68 N/A ) TR6 ) TR86 ) TR8767 Thermostat 0 Fuel Transfer Pump TR F () Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () Replacement Block. () ES > 8,80 use TAR67, ES 8,80-,6 use TRE, ES,66 > use TAR977. () TRE will require front key TR6 for the front damper. ) Injector, Pencil ) Injector Seals ) TAR078 ) TR6076 TR8000 Pump, Oil, Quad Transmission TAR99 For Tractors 00,00 T For Additional JOHN DEERE Products Refer to Page T7

57 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.0D >,999 Early Power Booster 6 Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm ) Engine O/H ) Engine I/F ) TOK66 ) TIK66 Piston-Liner Main Bearing Thrust Bearing TPLK6 a) TRE6 b) TAR60 c) TR6 d) TR00 e) TAR0 f ) TH807 TAR9 TAR9.00 TAR96.00 TAR97.00 Use 6 TAR9 TAR98.00 TAR99.00 TAR90.00 Use TAR7 TAR TAR TAR Use 6 Block (m): R6070, R80, R0, R0890, 0900 AGRICULTURAL ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Cam Follower )Plug, Camshaft ) O ring,oil Cooler ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) ) TAR66 ) TAR6 ) TR6 ) TR798 ) TR099 X6 ) TR66 X ) TR690 X ) TR6 ) TR6 ) TR7 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust Cap, Valve ) Spring, Valve ) Guide, Valve ) O ring, Valve TR6 ES > 8,80 TR7 ES 8,80-,999 TR6 ES > 8,80 TR7 ES 8,80-,999 ) TR680 ) TR68 N/A ) TR6 ) TR86 ) TR8767 Thermostat 0 Fuel Transfer Pump TR F () Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () ES > 8,80 use TAR67, ES 8,80-,6 use TRE, ES,66 > use TAR977. () TRE will require front key TR6 for the front damper. ) Injector, Pencil ) Injector Seals ) TAR078 ) TR6076 TR8000 Pump, Oil, Quad Transmission TAR99 For Tractors 00,00 For Additional JOHN DEERE Products Refer to Page T7 T

58 00 Series Model 6.0D,000-,8 6 Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm Block (m): R060, R060, R90, R770, R80 AGRICULTURAL CONSTRUC- TION600 ) Engine O/H ) Engine I/F ) TRG790 ) TIK790 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) Piston-Liner Main Bearing Thrust Bearing TRE6 a) TRE68 b) TAR60 c) TR6 d) TR06 e) TAR607 f ) TH807 ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TAR6 ) TAR60 ) TR89 ) TR798 TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) TR099 X6 ) TR66 X ) TR690 X TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) TR77 ) TAR0086 ) TR6 ) TR7 ) Cam Follower ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler TAR7 TAR TAR TAR Use 6 ) Head Bolt ) TMX6 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR88 TR00.00 TR00.0 TR679 TR TR788.0 ) TR680 ) TR68 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat 0 Fuel Transfer Pump TR F () Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. () ES > 8,80 use TAR67, ES 8,80-,6 use TRE, ES,66 > use TAR977. () TRE will require front key TR6 for the front damper. ) Injector, Pencil ) Injector Seals ) TAR078 ) TR6076 TR8000 Pump, Oil, Quad Transmission TAR99 For Tractors 000,00 T For Additional JOHN DEERE Products Refer to Page T7

59 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.0D,86 > 6 Cyl Bore:. in 08 mm Pin Ø:.0 in 8 mm Block (m): R970, R960, R980, R78, R878 AGRICULTURAL ) Engine O/H ) Engine I/F ) TRG7897 ) TIK7897 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear Piston-Liner Main Bearing Thrust Bearing TRE60 a) TRE6 b) TAR60 c) TR6 d) TR06 e) TAR607 f ) TH807 ) Head Gasket ) Head Gasket ) Oil Pan Gasket TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) Cam Follower ) Oil Cooler ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler TAR7 TAR TAR TAR Use 6 ) Head Bolt ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) ) TAR698 ) TAR690 ) TR89 ) TR798 ) TR099 X6 ) TR66 X ) TR690 X ) TR77 ) TAR9 ) TAR0086 ) TR6 ) TR7 ) TMX6 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR88 TR00.00 TR00.0 TR679 TR TR788.0 ) TR680 ) TR68 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat 0 Fuel Transfer Pump TR F () Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. () ES > 8,80 use TAR67, ES 8,80-,6 use TRE, ES,66 > use TAR977. () TRE will require front key TR6 for the front damper. ) Injector, Pencil ) Injector Seals ) TAR078 ) TR6076 TR8000 Pump, Oil, Quad Transmission TRE098 For Tractors 0,00 For Additional JOHN DEERE Products Refer to Page T7 T

60 00 Series Model 6.0T/A >,8 6 Cyl Bore:. in 08 mm Pin Ø:.6 in mm Block (m): R0, R980, R700 R70 AGRICULTURAL CONSTRUCTION 6 6A 66 66B A ) Engine O/H ) Engine I/F ) TRG0 ) TIK0 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) Piston-Liner Main Bearing Thrust Bearing TAR798 a) TAR06 b) TAR7 c) TR d) TR06 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TAR09 ) TAR670 ) TR89 ) TR798 TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) TR7 X6 ) TR66 X ) TR690 X TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) Cam Follower ) Oil Cooler ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler ) TR77 ) TAR9 For T Engines TAT08 For A Engines ) TAR008 ) TR6 ) TR7 TAR7 TAR TAR TAR Use 6 ) Head Bolt ) TMX6 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR88 () TR00.00 TR00.0 TR679 TR TR788.0 ) TR680 ) TR68 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat Fuel Transfer Pump Water Pump Repair Without Impeller With Impeller TR F 0 TAR977 See Chart on Page 8 () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. 0 () Use TR9 Std (0 Angle) on ESN >,7-,8. () TRE will require front key TR6 for the front damper. Pump, Oil, Quad Transmission TRE098 For Tractors 0,0, 60 T6 For Additional JOHN DEERE Products Refer to Page T7

61 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.0T/A,86 > 6 Cyl Bore:. in 08 mm Pin Ø:.6 in mm Block (m): R970, R960, R980, R78, R878 AGRICULTURAL ) Engine O/H ) Engine I/F ) TRG789 ) TIK789 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear Piston-Liner Main Bearing Thrust Bearing TAR67 a) TAR b) TAR7 c) TR d) TR06 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) Cam Follower ) Oil Cooler ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler TAR7 TAR TAR TAR Use 6 ) Head Bolt CONSTRUCTION 690B 69C 70 ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) ) TAR669 ) TAR670 ) TR89 ) TR798 ) TR7 X6 ) TR66 X ) TR690 X ) TR77 ) TAR9 For T Engines TAT08 For A Engines ) TAR008 ) TR6 ) TR7 ) TMX6 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR08 TR0.00 TR07.0 TR07 TR06.00 TR08.0 ) TR7870 ) TR06 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat TAR F 0 Fuel Transfer Pump Not Used Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. () TRE will require front key TR6 for the front damper. Pump, Oil, Quad Transmission TRE098 For Tractors 0,60, 0 For Additional JOHN DEERE Products Refer to Page T7 T7

62 00 Series Model 6.66D 6 Cyl Bore:.6 in 6 mm Pin Ø:.6 in mm Con Rod (m): R669, R888, R AGRICULTURAL ) Engine O/H ) Engine I/F ) TRG886 ) TIK886 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Rear Gear Piston-Liner Main Bearing Thrust Bearing TAR860 a) TAR00 b) TAR877 c) TR d) TAR6060 e) TAR9880 f ) TR TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) Cam Follower ) Oil Cooler ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler TAR7 TAR TAR TAR Use 6 ) Head Bolt ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) 6) TR66 ) TAR0068 ) TAR006 ) TRE76 ) TR798 ) TR7 X6 ) TR66 X ) TR690 X () ) TR77 ) TAR9 ) TAR0086 ) TR6 ) TR7 ) TMX6 ()* TMX66 ()** Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR88 TR00.00 TR00.0 TR679 TR TR788.0 ) TR680 ) TR68 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat TR F 0 Fuel Transfer Pump TRE8009 Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 Water Pump TRE98 (m) R7, (m) R86 () Pump, Oil, Quad Transmission TRE098 For Tractors 0,00 () Shape, Conrod Bushing. () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. * With ESN > 80. () TMX66 TR880 x, TR880 x8, TR880 x7. ** With ESN 80 >. () TRE will require front key TR6 for the front damper. () Must check proper application. T8 For Additional JOHN DEERE Products Refer to Page T7

63 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.66T >,7 6.66A >,9 6 Cyl Bore:.6 in 6 mm Pin Ø:.8 in 7 mm Con Rod (m): R70, R670 AGRICULTURAL CONSTRUCTION 6D 66C 70A 76A ) Engine O/H ) Engine I/F ) TRG88 ) TIK88 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Rear Gear ) TAR90 ) TRE006 ) TRE () ) TR609 (T) ) TR88 (9T) 6) TR66 Piston-Liner Main Bearing Thrust Bearing TAR7079 a) TAR969 b) TRE880 c) TR777 d) TAR6060 e) TAR9880 f ) TEFN ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TAR988 ) TAR988 ) TRE76 ) TR798 TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) TR607 X6 ) TR66 X ) TR690 X () TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty ) Cam Follower ) Oil Cooler ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler ) TR77 ) TAT08 () ) TAR008 ) TR6 ) TR7 TAR777 TAR TAR TAR78.00 Use 6 ) Head Bolt ) TMX6 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR08 TR0.00 TR07.0 TR07 TR06.00 TR08.0 ) TR7870 ) TR06 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat TAR F 0 Fuel Transfer Pump Not Used Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 () Shape, Conrod Bushing. () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. () Some applications use TAR9. () TRE will require front key TR6 for the front damper. () Must check proper application. Water Pump ) TRE98 (m) R7, (m) R86 () ) TRE00 (OEM ESN >) For Additional JOHN DEERE Products Refer to Page T7 Pump, Oil, Quad Transmission TRE098 For Tractors 0,60, 80 T9

64 00 Series Model 6.66T,7 > 6.66A 7,89 > 6 Cyl Bore:.6 in 6 mm Pin Ø:.8 in 7 mm Con Rod (m): R707 (P/N AR9) AGRICULTURAL CONSTRUCTION 6C 790D 690C 80B 76A/B 89D 770A/B ) Engine O/H ) Engine I/F ) TRG887 ) TIK887 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Rear Gear ) TAR90 ) TRE006 ) TRE (6) ) TR609 (T) ) TR88 (9T) 6) TR66 Piston-Liner Main Bearing Thrust Bearing TAR0066 a) TAR0066 b) TRE880 c) TR777 d) TAR6060 e) TAR9880 f ) TEFN ) TAR988 ) TAR988 ) TRE76 ) TR798 TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Con Rod ) Head Gasket ) Oil Pan Gasket ) TR7008 X6 ) TR66 X ) TR690 X ) TAR9 X () TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty 6 ) Cam Follower ) Oil Cooler ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler 6) Head Bolt ) TR77 ) TAT08 () ) TAR008 ) TR6 ) TR7 6) TMX6 ()* TMX66 ()** TAR777 TAR TAR TAR78.00 Use 6 ) Pump, Oil ) Repair ) TRE606 ) TMX06 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR08 TR0.00 TR07.0 TR07 TR06.00 TR08.0 ) TR7870 ) TR06 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat TAR F 0 Fuel Transfer Pump Not Used Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 Water Pump ) TRE98 (m) R7, (m) R86 (7) ) TRE00 (OEM ESN >) Pump, Oil, Quad Transmission TRE098 For Tractors 0, 00, 0, 60, 60 () Shape, Conrod Bushing. () For Crankshaft driven Engine Pump, Oil Shaft, Gears, and Gaskets. () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. * With ESN > () TMX66 TR880 x, TR880 x8, TR880 x7. ** With ESN 7677 >. () Some applications use TAR9. T0 (6) TRE will require front key TR6 for the front damper. (7) Must check proper application. For Additional JOHN DEERE Products Refer to Page T7

65 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.66A,9-7,88 6 Cyl Bore:.6 in 6 mm Pin Ø:.8 in 7 mm Con Rod (m): R707 (P/N AR9) AGRICULTURAL CONSTRUCTION 6C 770A/B 690C 80B 70A 89D 76A/B ) Engine O/H ) Engine I/F ) TRG0 ) TIK0 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Rear Gear ) TAR90 ) TRE006 ) TRE (6) ) TR609 (T) ) TR88 (9T) 6) TR66 Piston-Liner Main Bearing Thrust Bearing TAR00960 a) TAR0067 b) TRE880 c) TR777 d) TAR6060 e) TAR9880 f ) TEFN ) TAR988 ) TAR988 ) TRE76 ) TR798 TAR78 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Con Rod ) Head Gasket ) Oil Pan Gasket ) TR7008 X6 ) TR66 X ) TR690 X ) TAR9 X () TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty 6 ) Cam Follower ) Oil Cooler ) Camshaft ) Plug, Camshaft ) O ring, Oil Cooler 6) Head Bolt, ) TR77 ) TAT08 () ) TAR008 ) TR6 ) TR7 6) TMX6 ()* TMX66 ()** TAR777 TAR TAR TAR78.00 Use 6 ) Pump, Oil ) Repair ) TRE606 ) TMX06 () Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Spring, Valve ) Rotator, Valve ) O ring, Valve TR08 TR0.00 TR07.0 TR07 TR06.00 TR08.0 ) TR7870 ) TR06 ) TT09 ) TT0077 ) TR6 ) TRE0 ) TR8767 Thermostat TAR F 0 Fuel Transfer Pump Not Used Water Pump Repair Without Impeller With Impeller See Chart on Page 8 Water Pump ) TRE98 (m) R7, (m) R86 (7) ) TRE00 (OEM ESN >) () Shape, Conrod Bushing. () For Crankshaft driven Engine Pump, Oil Shaft, Gears, and Gaskets. () TMX6 TR880 x6, TR880 x, TR880 x8, TR880 x7. * With ESN > () TMX66 TR880 x, TR880 x8, TR880 x7. ** With ESN 7677 >. () Some applications use TAR9. For Additional JOHN DEERE Products Refer to Page T7 (6) TRE will require front key TR6 for the front damper. (7) Must check proper application. T

66 00 Series Model 6.076T/A/H Low Ring Piston 6 Cyl Bore:.6 in 6 mm Pin Ø:.8 in 7 mm ) Engine O/H ) Engine I/F ) TRE6099 ) TIK6099 Piston-Liner Main Bearing Thrust Bearing TRE6097 a) TRE77 () b) TRE880 c) TR777 d) TAR6060 e) TAR9880 f ) TEFN TAR78 TAR TAR TAR Use 6 TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty TAR777 TAR TAR TAR78.00 Use 6 Con Rod (m): R707 (P/N AR9) AGRICULTURAL CONSTRUCTION 89E (8) 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Rear Gear ) TAR90 ) TRE006 ) TRE0 () or TRE () ) TR088 () ) TR88 (9T) 6) TR66 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TRE67 ) TRE989 ) TRE76 ) TR798 ) Con Rod ) TR7008 X6 ) TR66 X ) TR876 X ) TAR9 X ) Oil Cooler ) O ring, Oil Cooler ) Plug, Camshaft ) Head Bolt ) Tappet ) TAR9 (6) ) TR7 ) TR8007 ) TMX66 () ) TR06 (7) ) Pump, Oil ) Repair ) TRE606 (9) ) TMX06 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Shield, Valve ) Spring, Valve ) Rotator, Valve TR868 TR TR9.0 TR869 TR9.00 TR9.0 ) TR8977 ) TR8976 ) TT09 ) TT0077 ) TR088 ) TR98 ) TRE0 Thermostat Fuel Transfer Pump Water Pump Repair Water Pump Without Impeller With Impeller TRE98 (m) R7, (m) R86 0 TAR F N/A or See Chart on Page 8 TRE680 (HIGH FLOW) () Low Ring Piston. () Long snout (.in.) C/S (m) R87, RE0 (Front gear not available with Maxiforce). () Short snout (in) C/S (m) RE0, R6, R08. () TRE Use Helicoidal front gear. () Use with blocks marked R09806 and below. (6) ESN > 0066 Use: TAT08. Not for use with ESN 00,000 >. (7) ESN 90 > (8) Low Ring Piston Recommended. (9) If housing is marked (m) R76 or R007 or ESN > use TRE6R (Reman Unit). T For Additional JOHN DEERE Products Refer to Page T7

67 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.076T/A/H High Ring Piston 6 Cyl Bore:.6 in 6 mm Pin Ø:.8 in 7 mm Con Rod (m): R707 (P/N AR9) ) Engine O/H ) Engine I/F ) TRE6 ) TIK6 Piston-Liner Main Bearing Thrust Bearing TRE609 a) TRE7 b) TRE77 c) TR777 d) TAR6060 e) TAR9880 f ) TEFN TAR78 TAR TAR TAR Use 6 TAR7778 TAR TAR TAR Use Thrust Washer TAR7777 TAR Use, Order Qty TAR777 TAR TAR TAR78.00 Use 6 AGRICULTURAL CONSTRUCTION 6E/ER 77B/BH 6G/GH 79D/LC 70E/G 80C 78E/G 770B/BH 6 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Rear Gear ) TAR90 ) TRE006 ) TRG () ) TR087 ) TR88 (9T) 6) TR66 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TRE67 ) TRE989 ) TRE76 ) TR798 ) Con Rod ) TR7008 X6 ) TR66 X ) TR876 X ) TAR9 X ) Tappet ) Plug, Camshaft ) Tensioner, Belt ) TR06 ) TR8007 ) TRE8097 ) Pump, Oil ) Repair ) TRE606 () ) TMX06 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Cap, Valve ) Lock, Valve ) Shield, Valve ) Spring, Valve ) Rotator, Valve TR868 TR TR9.0 TR869 TR9.00 TR9.0 ) TR8977 ) TR8976 ) TT09 ) TT0077 ) TR088 ) TR98 ) TRE0 Thermostat TAR F 0 Fuel Transfer Pump N/A Water Pump Repair Without Impeller With Impeller See Chart on Page 8 () C/S (m) RE99, with straight front gear TR087. Helical gear should be discarded. TRG will require front key TR6 for the front damper. () If housing is marked (m) R76 or R007 use TRE6R (Reman Unit). () Must check proper application. For Additional JOHN DEERE Products Refer to Page T7 Water Pump TRE98 (m) R7, (m) R86 () or TRE680 (HIGH FLOW) T

68 00 Series Model 6.D (Do Not Use this for Early Engines with Block Casting No: R0.) 6 Cyl Bore:.7 in mm Pin Ø:.7 in. mm ) Engine O/H ) Engine I/F ) TOK69 ) TIK69 Piston-Liner Main Bearing Thrust Bearing TPLK9 a) TRE68 b) TAR9 c) TR0 d) TR66 e) TAR9 f ) TD8R TAR066 TAR TAR TAR Use 6 TAR067 TAR06.00 TAR06.00 TAR Use Thrust Washer TAR896 TAR Use, Order Qty TAR00 TAR TAR TAR70.00 Use 6 Con Rod (m): R08, R888, R08 R6697, R86 Block (m): R070, R70, R00 R70 AGRICULTURAL CONSTRUCTION A 760A ) Front Seal ) Rear Seal ) Crankshaft ) TAR90 ) TRE0 ) TAR9 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TAR6 ) TAR6 ) TR78 ) TR799 ) TR68 X6 ) TR66 X ) TR690 X Thermostat TR F 0 ) TAR078 ) TR6076 TR8000 ) Injector, Pencil ) Seal Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Guide, Valve ) Lock, Valve ) Cap, Valve Spring, Valve TR8 TR8 ) TR868 ) TR869 ) TR9 ) TR ) TR066 N/A T For Additional JOHN DEERE Products Refer to Page T7

69 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.T 6 Cyl Bore:.7 in mm Pin Ø:.87 in 7.6 mm Con Rod (m): R8, R87, R888, R6696 Bock (m): R860, R79, R800 CONSTRUCTION 6B 66B A 77A ) Engine O/H ) Engine I/F ) TOK6 ) TIK6 ) Front Seal ) Rear Seal ) Crankshaft ) TAR90 ) TRE0 ) TAR9 Piston-Liner Main Bearing Thrust Bearing TPLK a) TAR67 b) TAR6 c) TR98 d) TR80 e) TR9 f ) TEFN ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TRE700 ) TAR670 ) TR78 ) TR799 TAR066 TAR TAR TAR Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) TR7678 X6 ) TR66 X ) TR690 X TAR067 TAR06.00 TAR06.00 TAR Use Thrust Washer TAR896 TAR Use, Order Qty Pump, Oil TRE606 () TAR00 TAR TAR TAR70.00 Use 6 ) Thermostat ) Injector, Pencil ) Seal 0 ) TAR F ) TAR078 ) TR6076 TR8000 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Guide, Valve ) Lock, Valve ) Cap, Valve Spring, Valve ) Outer ) Inner ) Rotator, Valve TR9060 TR9060 ) TR868 ) TR9 ) TR97 ) TR869 ) TR ) TR969 ) TR066 ) TR8086 () Crank Driven Pump. For Additional JOHN DEERE Products Refer to Page T7 T

70 Model 6.A 6 Cyl 00 Series Bore:.7 in mm Pin Ø:.87 in 7.6 mm Con Rod (m): R8, R87, R888, R6696 ) Engine O/H ) Engine I/F ) TOK6 ) TIK6 Piston-Liner Main Bearing Thrust Bearing TPLK a) TAR7 b) TAR6 c) TR98 d) TR80 e) TR9 f ) TEFN TAR066 TAR TAR TAR Use 6 TAR067 TAR06.00 TAR06.00 TAR Use Thrust Washer TAR896 TAR Use, Order Qty TAR00 TAR TAR TAR70.00 Use 6 Block (m): R860, R79, R800 AGRICULTURAL ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket Pump, Oil Thermostat ) TAR90 ) TRE0 ) TAR9 ) TRE706 ) TAR6 ) TR78 ) TR799 ) TR7678 X6 ) TR66 X ) TR690 X TRE606 () TAR F 0 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Guide, Valve ) Lock, Valve ) Cap, Valve Spring, Valve ) Outer ) Inner ) Rotator, Valve TR9060 TR9060 N/A ) TR9 ) TR97 ) TR ) TR969 ) TR066 ) TR8086 () Crank Driven Pump. T6 For Additional JOHN DEERE Products Refer to Page T7

71 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.69A/T > 08 6 Cyl Early Bore:. in 0 mm Pin Ø:.00 in 0.8 mm ) Engine O/H ) Engine I/F ) TOK8089 ) TIK8089 Piston-Liner Main Bearing Thrust Bearing TAR8089 a) TAR6908 b) TAR8 c) TR6 d) TR669 e) TAR7 f ) TN68 TAR068 TAR0.00 TAR0.00 TAR0.00 Use 6 TAR069 TAR06.00 TAR07.00 TAR08.00 Use Thrust Washer TAR896 TAR Use, Order Qty TAR07 TAR00.00 TAR0.00 TAR0.00 Use 6 Con Rod (m): R669, R78 Block (m): R7 ) Front Seal ) Rear Seal ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam Pump, Oil Thermostat AGRICULTURAL 860 ) Crankshaft ) TAR90 ) TRE0 ) TAR9 ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TRE76 ) TRE77 ) TRE009 ) TR799 ) TR6097 X6 ) TR66 X ) TR690 X TRE606 () TAR F 0 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Guide, Valve ) Lock, Valve ) Cap, Valve Spring, Valve ) Outer ) Inner ) Rotator, Valve TR7690 TR698 ) TR989 ) TR9 ) TR97 ) TR607 ) TR ) TR969 ) TR066 ) TR8086 () Crank Driven Pump. For Additional JOHN DEERE Products Refer to Page T7 T7

72 00 Series Model 6.69A/T Cyl Mid Bore:. in 0 mm Pin Ø:.00 in 0.8 mm ) Engine O/H ) Engine I/F ) TOK09 ) TIK09 Piston-Liner Main Bearing Thrust Bearing TRE09 a) TRE07 b) TAR8 c) TR6 d) TR669 e) TAR7 f ) TN68 TAR068 TAR0.00 TAR0.00 TAR0.00 Use 6 TAR069 TAR06.00 TAR07.00 TAR08.00 Use Thrust Washer TAR896 TAR Use, Order Qty TAR07 TAR00.00 TAR0.00 TAR0.00 Use 6 Con Rod (m): R699 Block (m): R7, R70 AGRICULTURAL CONSTRUCTION A 860B ) Front Seal ) Rear Seal ) Crankshaft ) TAR90 ) TRE0 ) TAR9 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TRE76 ) TRE77 ) TRE009 ) TR799 ) TR690 X6 ) TR66 X ) TR690 X Pump, Oil TRE606 () Thermostat TAR F 0 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Guide, Valve ) Lock, Valve ) Cap, Valve Spring, Valve ) Outer ) Inner ) Rotator, Valve TR7690 TR698 ) TR989 ) TR9 ) TR97 ) TR607 ) TR ) TR969 ) TR066 ) TR8086 T8 For Additional JOHN DEERE Products Refer to Page T7

73 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES 00 Series Model 6.69 A/T > 6 Cyl Late Bore:. in 0 mm Pin Ø:.00 in 0.8 mm ) Engine O/H ) Engine I/F ) TOK076 ) TIK076 Piston-Liner Main Bearing Thrust Bearing TRE076 a) TRE07 b) TAR8 c) TR6 d) TR7760 e) TAR7 f ) TN68 TAR068 TAR0.00 TAR0.00 TAR0.00 Use 6 TAR069 TAR06.00 TAR07.00 TAR08.00 Use Thrust Washer TAR896 TAR Use, Order Qty TAR07 TAR00.00 TAR0.00 TAR0.00 Use 6 Con Rod (m): R699 AGRICULTURAL ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket Pump, Oil Thermostat CONSTRUCTION 7E A 8 99D/E 860B ) TAR90 ) TRE0 ) TAR9 ) TRE76 ) TRE77 ) TRE009 ) TR799 ) TR690 X6 ) TR66 X ) TR690 X TRE606 () TAR F 0 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Guide, Valve ) Lock, Valve ) Cap, Valve Spring, Valve ) Outer ) Inner ) Rotator, Valve TR7690 TR698 ) TR989 ) TR9 ) TR97 ) TR607 ) TR ) TR969 ) TR066 ) TR8086 For Additional JOHN DEERE Products Refer to Page T7 T9

74 00 Series Model 6.0A/T > 99,999 6 Cyl Bore:. in 0 mm Pin Ø:.00 in 0.8 mm ) Engine O/H ) Engine I/F ) TOK076L ) TIK076L Piston-Liner Main Bearing Thrust Bearing TRE076 a) TRE07 b) TAR8 c) TR6 d) TR7760 e) TAR7 f ) TN68 TAR068 TAR0.00 TAR0.00 TAR0.00 Use 6 TAR069 TAR06.00 TAR07.00 TAR08.00 Use Thrust Washer TAR896 TAR Use, Order Qty TAR07 TAR00.00 TAR0.00 TAR0.00 Use 6 Block (m): R79, R87, R887 R98 AGRICULTURAL ) Front Seal ) Rear Seal ) Crankshaft ) Rear Gear ) TAR90 ) TRE0 ) TAR9 ) TR66 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TRE76 ) TRE77 ) TRE009 ) TR799 ) TR690 X6 ) TR66 X ) TR876 X Thermostat TAR F 0 Pump, Oil TRE606 Valve, Intake Valve, Exhaust Insert, Valve ) Intake ) Exhaust ) Lock, Valve ) Shield, Valve ) Spring, Valve ) Rotator, Valve ) Cap, Valve TR00 TR00 N/A ) TT0077 ) TR088 X6 ) TR98 ) TRE0 ) TT09 T60 For Additional JOHN DEERE Products Refer to Page T7

75 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES John Deere / Yanmar Model 0D Bore:.0 in 8.00 mm Stroke:. in mm Engine O/H TOK0D TOK0D/0 Piston with Rings Pin & Retainers TAM TAM See note () below Main Bearing TAM877 TMIA ConRod Bearing TMIA8806 TMIA Thrust Washers TMIA880 Use Use Use of 790 Utility Tractor 7 Skid Steer 00 Utility Tractor OEM Applications ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) TM ) TM8078 ) TAM88089 ) TMGS0 ) TM8060 ) TM680 ) TM807 ) TM806 X ) TCH8 X6 ) TMIU8007 X ) TAM879 ) TAM8760 ) TM8006 X6 Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve TM800 X TMIU8009 X ) TM807 X ) TM808 X ) TAM87886 X ) TCH00 X ) TT060 X TM80 X6 Thermostat TM80 Oil Pump TAM () Rings only to be used with MAXIFORCE PISTONS (ALFIN). () OEM Applications Only. () Used on 790 Utility Tractor. () Check your application for proper usage. Lift Pump TAM886 For Additional JOHN DEERE Products Refer to Page T7 Water Pump ) TAM88090 () ) TAM88090 () ) TAM889 () T6

76 John Deere / Yanmar Model 00D Engine O/H Piston with Rings Pin & Retainers Main Bearing ConRod Bearing Thrust Washers Bore:.0 in 8.00 mm Stroke:. in mm TOK00D TOK00D/0 TAM TAM See note () below TAM877 TMIA TMIA8806 TMIA TMIA880 Use Use Use of 667 Skid Steer 00 Utility Tractor 600 Utility Tractor OEM Applications ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) TM ) TM8078 ) TAM88 ) TMGS00 ) TM8060 ) TM680 ) TM800 ) TM806 X ) TCH8 X8 ) TMIU8007 X ) TAM879 ) TAM8786 ) TM8006 X8 Valve, Intake TM800 X Valve, Exhaust TMIU8009 X Guide, Valve ) Intake ) Exhaust ) TM807 X ) TM808 X ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh ) TAM87886 X6 ) TCH00 X ) TT060 X Spring, Valve TM80 X8 Thermostat Oil Pump TM80 TAM87889 () Rings only to be used with MAXIFORCE PISTONS (ALFIN). () OEM Applications Only. () Check your application for proper usage. Lift Pump TAM886 Water Pump ) TAM88090 () ) TAM88090 () ) TAM889 () T6 For Additional JOHN DEERE Products Refer to Page T7

77 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES John Deere / Yanmar Model 00T Engine O/H Piston with Rings Pin & Retainers Main Bearing ConRod Bearing Thrust Washers Bore:.0 in 8.00 mm Stroke:. in mm TOK00T TOK00T/0 TAM8787 TAM See note () below TAM877 TMIA TMIA8806 TMIA TMIA880 Use Use Use of 600 Turbo Wide Area Mowers OEM Applications ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) TM ) TM8078 ) TAM88 ) TMGS00 ) TM8060 ) TM680 ) TM800 ) TM806 X ) TCH8 X8 ) TMIU8007 X ) TAM879 ) TAM8786 ) TM8006 X8 Valve, Intake TM800 X Valve, Exhaust TT069 X Guide, Valve ) Intake ) Exhaust ) TM807 X ) TM808 X ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh ) TAM87886 X6 ) TCH00 X ) TT060 X Spring, Valve TM80 X8 Thermostat TM80 Oil Pump TAM87889 () TRG6060 () () Rings only to be used with MAXIFORCE PISTONS (ALFIN). () Used on Code 006, 06. () Used on Code 00, 00, 0, 0. () Check your application for proper usage. Lift Pump TAM886 For Additional JOHN DEERE Products Refer to Page T7 Water Pump ) TAM88090 () ) TAM88090 () ) TAM889 () T6

78 PowerTech Model 09.9D,768 > CODE 809 Cyl Bore:.9 in 06. mm Pin Ø:. in mm Piston (m): RE667, RE000 AGRICULTURAL /N OEM.9L CONSTRUCTION 0 Skid Steer ) Engine O/H ) Engine I/F ) TOK.9D9 ) TIK.9D9 6 7 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE0979 ) TT009 () ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake Piston-Liner Main Bearing Thrust Bearing TRE66968 a) TRE667 () b) TRE667 c) TR68 d) TAR607 ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR06796 Valve, Exhaust TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) TR000 X ) TR800 X6 Insert, Valve ) Intake ) Exhaust TRE7.00 TRE TRE Use TAT9 ) Seal, Valve ) Lock, Valve TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm (Intake/Exhaust) ) Rock. Arm Shaft ) Cyl Hd Cap Screw ) TRE ) TRE6767 ) TRE97 ) TR98 ) TR86 X () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam Follower 6) Cam Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () ) Spring, Valve ) Rotator, Valve TR9806 TR TR9069 TR979.0 ) TR068 ) TR0689 ) TRE67 ) TR9889 ) TR6 ) TRE6000 Thermostat TRE6 80 F 0 Fuel Transfer Pump TRE8009 Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77, (m) R798, (m) R6 Injector, Pencil TRE696 Seal TRE60 () Helicoidal Gears. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. Use TR0 bolts with fractured split connecting rods. () Piston includes Pin and Retainers. T6 For Additional JOHN DEERE Products Refer to Page T7

79 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES PowerTech Model 09.9T 887 > CODE 808 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm Piston (m): RE670 AGRICULTURAL > 00N OEM.9L CONSTRUCTION 887 Skid Steer ) Engine O/H ) Engine I/F ) TOK.9T ) TIK.9T 6 7 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear 6) Sleeve, Front 7) Packing, Sleeve ) TAR679 ) TRE7 ) TRE0979 ) TT009 () ) TR88 (9T) or TR8 (T) 6) TR8989 7) TH Valve, Intake Piston-Liner Main Bearing Thrust Bearing TRE0067 a) TRE00 b) TRE667 c) TMX9 d) TR68 e) TAR607 f ) TR ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE078 ) TRE880 ) TR976 ) TR97 ) TR06796 Valve, Exhaust TRE7 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) TR687 X ) TR800 X6 Insert, Valve ) Intake ) Exhaust TRE7.00 TRE TRE Use TAT9 ) Seal, Valve ) Lock, Valve TAT.00 TAT.00 TAT6.00 Use ) Pump, Oil ) Oil Cooler ) Rocker Arm (Intake/Exhaust) ) Rocker Arm Shaft ) Cyl Hd Cap Screw ) TRE ) TRE6767 ) TRE97 ) TR98 ) TR86 X () TRE78 TRE79.00 TRE78.00 TRE76.00 Use 6 ) Lower Gear ) Lower Bushing ) Upper Gear ) Upper Bushing ) Cam Follower 6) Cam Gear ) TAT () ) TT6 ) TAT8009 () ) TT00 ) TT007 6) TT0070 () ) Spring, Valve ) Rotator, Valve TR9806 TR TR9069 TR979.0 ) TR068 ) TR0689 ) TRE67 ) TR9889 ) TR6 ) TRE6000 Thermostat TRE6 80 F 0 Fuel Transfer Pump TRE8009 Water Pump Rep a) Without Impeller b) With Impeller See Chart on Page 8 Water Pump TAR97708 (m) R760 TRE6089 (m) R008, (m) R77, (m) R798, (m) R6 Injector, Pencil TRE8087 Seal TRE69 () Helicoidal Gears. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. Use TR0 bolts with fractured split connecting rods. For Additional JOHN DEERE Products Refer to Page T7 T6

80 PowerTech Model 0D.D Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm Piston (m): RE979, RE00 ) Engine O/H ) Engine I/F ) TRE6609 TRE6609A (*) ( ) w/c. Rod R00000 * ) TIK6609 TIK6609A (*) ( ) w/c. Rod R00000 * Piston-Liner Main Bearing Thrust Bearing TRE6966 (RE00) a) TRE979 b) TRE667 c) TR78 d) TR68 e) TAR607 f ) TM09 TRE66 TRE668 TRE6908 TRE69.00 TRE69.00 TRE TRE66B.00 (9) TRE668B.00 (9) TRE6908B.00(9) Use Use Use Con Rod (m): R99, R00000 AGRICULTURAL /N OEM.L CONSTRUCTION 0LE 86E 0E 88E 0H 0H 8E 60H Thermostat 0 TRE6 80 F or TRE076 (0) T66 ) Front Seal ) Rear Seal ) Ring Gear ) Crankshaft ) Seal ) TRE0 (8) ) TRE7 ) TR88 (9T) or TR8 (T) ) TRE068 () ) TH Valve, Intake TR9806 TR Injector, Pencil TRE6006 (Non Turbo) TRE8786 (Turbo) TRE6 () ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal.Shaft ) Bush, Camshaft ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE0 ) TRE6608 ) TR6 ) TR () TR97 () (R) ) TR Valve, Exhaust TR9069 TR979.0 Seal TR9 TR8000 ) TR960 X ) TR08 X8 () TR0 X8 () ) TR99 X6 ) TR987 X ) TRE67 (6) 6) TRE008 7) TRE009 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S () Use TR08 Rod Bolts with Machine Split Connecting Rods, and use TR0 Rod Bolts with Fractured Split Connecting Rods. () Use with Oil Pan code 90, 90 & 90, for Steel Oil Pan. () Use with Oil Pan code 90 & 90, for Aluminum Oil Pan. For Additional JOHN DEERE Products Refer to Page T7 6/7 ) Camshaft 6) Bal. Shaft R/H 7) Bal. Shaft L/H Fuel Transfer Pump TRE68 or TRE66 (7) ) Cyl Hd Cap Screw ) Tappet ) Tensioner, Belt ) Con Rod ) Oil Cooler ) TR86 X8 () ) TR6 X8 ) TRE8097 ) TRE0000 (m R00,000) ) TRE6690 (7 Plates) TRE998 (9 Plates) ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Water Pump ) Water Pump Cov ) Water Pump Gsk ) Pump, Oil ) TRE0077 (Standard Flow) TRE007 (High Flow) ) TRE0866 ) TR7 ) TRE09 ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Crankshaft (m) R96. Not to be used with applications requiring speed sensor gear. (6) (m) R9, R, R. (7) Line Connections are both threaded. (8) Piece Unitized Seal and Wearsleeve; Replaces TRE980, RE8097. (9) Proper bearing journal radius must be maintained during the machining of the crankshaft to ensure proper operation. (0) Check application for proper usage. () Use with Stanadyne DE0 Injection Pump.

81 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES PowerTech Model 0T.T Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm Piston (m): RE977, RE000 Con Rod (m): R99, R00000 AGRICULTURAL 0/X 0/N /N 7 89 /N /N 6/N OEM.L CONSTRUCTION 0 LCR H 0E (TURBO) 0E 0G (TURBO) 0G 0SE (TURBO) 0J 0SG (TURBO) 0H SE 0H SG 60H Thermostat TRE6 800 F or TRE076 (0) ) Engine O/H Piston-Liner Main Bearing Thrust Bearing ) Engine I/F TRE0790 TRE66 TRE668 TRE6908 (RE7) ) TRE6609 TRE69.00 TRE69.00 TRE TRE6609A (*) a) TRE7 TRE66B.00 (9) TRE668B.00 (9) TRE6908B.00(9) (*) w/c. Rod R00000 b) TRE6680 c) TR78 ) TIK6609 d) TR68 TIK6609A (*) e) TAR607 (*) w/c. Rod R00000 f ) TM09 Use Use Use ) Front Seal ) Rear Seal ) Ring Gear ) Crankshaft ) Seal ) TRE0 (8) ) TRE7 ) TR88 (9T) or TR8 (T) ) TRE068 () ) TH Valve, Intake TR9806 TR Injector, Pencil TRE6006 (Non Turbo) TRE8786 (Turbo) TRE6 () ) O/H Gasket ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE0 ) TRE6608 ) TR6 ) TR () TR97 () (R) ) TR Seal TR9 TR8000 For Additional JOHN DEERE Products Refer to Page T7 6/7 ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal.Shaft ) Bush, Camshaft ) Camshaft 6) Bal. Shaft R/H 7) Bal. Shaft L/H ) TR960 X ) TR08 X8 () TR0 X8 () ) TR99 X6 ) TR987 X ) TRE67 (6) 6) TRE008 7) TRE009 Valve, Exhaust Insert, Valve ) Intake ) Exhaust TR9069 ) TR9806 TR979.0 TR98 O/S ) TR8687 TR990 O/S Fuel Transfer Pump TRE68 or TRE66 (7) () Use TR08 Rod Bolts with Machine Split Connecting Rods, and use TR0 Rod Bolts with Fractured Split Connecting Rods. () Use with Oil Pan code 90, 90 & 90, for Steel Oil Pan. () Use with Oil Pan code 90 & 90, for Aluminum Oil Pan. ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Cyl Hd Cap Screw ) Tappet ) Tensioner, Belt ) Con Rod ) Oil Cooler ) TR86 X8 () ) TR6 X8 ) TRE8097 ) TRE0000 (m R00,000) ) TRE6690 (7 Plates) TRE998 (9 Plates) ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 T67 ) Water Pump ) Water Pump Cov ) Water Pump Gsk ) Pump, Oil ) TRE0077 (Standard Flow) TRE007 (High Flow) ) TRE0866 ) TR7 ) TRE09 () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Crankshaft (m) R96. Not to be used with applications requiring speed sensor gear. (6) (m) R9, R, R. (7) Line Connections are both threaded. (8) Piece Unitized Seal and Wearsleeve; Replaces TRE980, RE8097. (9) Proper bearing journal radius must be maintained during the machining of the crankshaft to ensure proper operation. (0) Check application for proper usage. () Use with Stanadyne DE0 Injection Pump.

82 PowerTech Model 0T/H.T/H Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm Piston (m): RE, RE00 Con Rod (m): R08, R00 AGRICULTURAL /L/S 60/L 60L 60/L 660S 60/L/S OEM.L CONSTRUCTION 0 0H H/HCL 0G TCH G 0G 60G G Thermostat TRE6 800 F or TRE076 (0) T68 ) Engine O/H Piston-Liner Main Bearing Thrust Bearing ) Engine I/F TRE0780 TRE66 TRE668 TRE6908 (RE0) ) TRE6609 TRE69.00 TRE69.00 TRE TRE6609A (*) a) TRE TRE66B.00 (9) TRE668B.00 (9) TRE6908B.00(9) (*) w/c. Rod R00 b) TRE6680 ) TIK6609 c) TR77 d) TR68 TIK6609A ( ) * e) TAR607 ( ) w/c. Rod R00 * f ) TR Use Use Use ) Front Seal ) Rear Seal ) Ring Gear ) Crankshaft ) Seal ) TRE0 (8) ) TRE7 ) TR88 (9T) or TR8 (T) ) TRE068 () ) TH Valve, Intake TR9806 TR Injector, Pencil TRE6006 (Non Turbo) TRE8786 (Turbo) TRE6 () ) O/H Gasket ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE0 ) TRE6608 ) TR6 ) TR () TR97 () (R) ) TR Valve, Exhaust TR9069 TR979.0 Seal TR9 TR8000 For Additional JOHN DEERE Products Refer to Page T7 6/7 ) Bush, Con Rod ) Bolt, Con Rod ) Bush, Bal.Shaft ) Bush, Camshaft ) Camshaft 6) Bal. Shaft R/H 7) Bal. Shaft L/H ) TR08 X ) TR08 X8 () TR0 X8 () ) TR99 X6 ) TR987 X ) TRE67 (6) 6) TRE008 7) TRE009 Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S Fuel Transfer Pump TRE68 or TRE66 (7) () Use TR08 Rod Bolts with Machine Split Connecting Rods, and use TR0 Rod Bolts with Fractured Split Connecting Rods. () Use with Oil Pan code 90, 90 & 90, for Steel Oil Pan. () Use with Oil Pan code 90 & 90, for Aluminum Oil Pan. ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Cyl Hd Cap Screw ) Tappet ) Tensioner, Belt ) Con Rod ) Oil Cooler ) TR86 X8 () ) TR6 X8 ) TRE8097 ) TRE00608 (m R00,) ) TRE6690 (7 Plates) TRE998 (9 Plates) () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Crankshaft (m) R96. Not to be used with applications requiring speed sensor gear. (6) (m) R9, R, R. (7) Line Connections are both threaded. (8) Piece Unitized Seal and Wearsleeve; Replaces TRE980, RE8097. (9) Proper bearing journal radius must be maintained during the machining of the crankshaft to ensure proper operation. (0) Check application for proper usage. () Use with Stanadyne DE0 Injection Pump. ) TR6 ) TRE6000 ) Water Pump ) Water Pump Cov ) Water Pump Gsk ) Pump, Oil ) TRE0077 (Standard Flow) TRE007 (High Flow) ) TRE0866 ) TR7 ) TRE09 ) Spring, Valve ) Rotator, Valve

83 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES PowerTech Model 6068D 6.8D 6 Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm Piston (m): RE979, RE00 Con Rod (m): RE99, R00000 AGRICULTURAL SE60 SE60 OEM 6.8L ) Engine O/H Piston-Liner Main Bearing Thrust Bearing ) Engine I/F TRE6966 TRE66 TRE668 TRE6908 (RE00) ) TRE6609 TRE69.00 TRE69.00 TRE TRE6609A (*) a) TRE979 TRE66B.00 (8) TRE668B.00 (8) TRE6908B.00(8) ( ) w/c. Rod R00000 * b) TRE667 ) TIK6609 c) TR78 d) TR68 TIK6609A (*) e) TAR607 ( ) w/c. Rod R00000 * f ) TM09 Use 6 Use Use 6 ) Front Seal ) Rear Seal ) Ring Gear ) Crankshaft ) Seal ) TRE0 () ) TRE7 ) TR88 (9T) or TR8 (T) ) TRE80 () ) TH Valve, Intake TR9806 TR ) O/H Gasket ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE06 ) TRE6608 ) TR66 ) TR ) TR Valve, Exhaust Insert, Valve ) Intake ) Exhaust TR9069 ) TR9806 TR979.0 TR98 O/S ) TR8687 TR990 O/S ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) TR960 X6 ) TR08 X () TR0 X () ) TR987 X ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Cyl Hd Cap Screw ) Tappet ) Tensioner, Belt ) Con Rod ) Oil Cooler ) TR86 X6 () ) TR6 X ) TRE8097 ) TRE0000 (m R00,000) ) TRE6690 (7 Plates) TRE998 (9 Plates) ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Water Pump ) Water Pump Cov ) Water Pump Gsk ) Pump, Oil ) TRE0077 (Standard Flow) TRE007 (High Flow) ) TRE0866 ) TR7 ) TRE09 Thermostat TRE6 800 F or TRE076 (7) Injector, Pencil TRE6006 (Non Turbo) TRE8786 (Turbo) TRE6 (6) Seal TR9 TR8000 Fuel Transfer Pump TRE68 or TRE66 () () Use TR08 Rod Bolts with Machine Split Connecting Rods, and use TR0 Rod Bolts with Fractured Split Connecting Rods. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Crankshaft (m) R6076, R06. For Additional JOHN DEERE Products Refer to Page T7 () Line Connections are both threaded. () Piece Unitized Seal and Wearsleeve; Replaces TRE980, RE8097. (6) Use with Stanadyne DE0 Injection Pump. (7) Check application for proper usage. (8) Proper bearing journal radius must be maintained during the machining of the crankshaft to ensure proper operation. T69

84 PowerTech Model 6068T 6.8T 6 Cyl Bore:.9 in 06. mm Pin Ø:.7 in mm Piston (m): RE977, RE000 Con Rod (m): RE99, R00000 AGRICULTURAL OEM 6.8L CONSTRUCTION 670C/CH 67CH 700H/J ) Engine O/H Piston-Liner Main Bearing Thrust Bearing ) Engine I/F TRE0790 TRE66 TRE668 TRE6908 (RE7) ) TRE66096 TRE69.00 TRE69.00 TRE TRE66096A ( TRE66B.00 (8) TRE668B.00 (8) TRE6908B.00(8) *) a) TRE7 ( ) w/c. Rod R00000 * b) TRE6680 c) TR78 ) TIK66096 d) TR68 TIK66096A ( ) * e) TAR607 (*) w/c. Rod R00000 f ) TM09 Use 6 Use Use 6 ) Front Seal ) Rear Seal ) Ring Gear ) Crankshaft ) Seal ) TRE0 () ) TRE7 ) TR88 (9T) or TR8 (T) ) TRE80 () ) TH Valve, Intake TR9806 TR ) O/H Gasket ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE06 ) TRE6608 ) TR66 ) TR ) TR Valve, Exhaust TR9069 TR979.0 ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) TR960 X6 ) TR08 X () TR0 X () ) TR987 X Insert, Valve ) Intake ) Exhaust ) TR9806 TR98 O/S ) TR8687 TR990 O/S ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Cyl Hd Cap Screw ) Tappet ) Tensioner, Belt ) Con Rod ) Oil Cooler ) TR86 X6 () ) TR6 X ) TRE8097 ) TRE0000 (m R00,000) ) TRE6690 (7 Plates) TRE998 (9 Plates) ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Water Pump ) Water Pump Cov ) Water Pump Gsk ) Pump, Oil ) TRE0077 (Standard Flow) TRE007 (High Flow) ) TRE0866 ) TR7 ) TRE09 () Use TR08 Rod Bolts with Machine Split Connecting Rods, and use TR0 Rod Bolts with Fractured Split Connecting Rods. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Crankshaft (m) R6076, R06. T70 Thermostat 0 TRE6 80 F or TRE076 (7) Injector, Pencil TRE6006 (Non Turbo) TRE8786 (Turbo) TRE6 (6) Seal TR9 TR8000 Fuel Transfer Pump TRE68 or TRE66 () () Line Connections are both threaded. () Piece Unitized Seal and Wearsleeve; Replaces TRE980, RE8097. (6) Use with Stanadyne DE0 Injection Pump. (7) Check application for proper usage. (8) Proper bearing journal radius must be maintained during the machining of the crankshaft to ensure proper operation. For Additional JOHN DEERE Products Refer to Page T7

85 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES PowerTech Model 6068T/H 6.8T/H 6 Cyl Bore:.9 in 06. mm Pin Ø:.6 in mm Piston (m): RE, RE00 Con Rod (m): R08, R00 AGRICULTURAL OEM 6.8L CONSTRUCTION 00LL/LC 60G/II/III 0LC 6G 70LC 68G/II/III 0G/GLL 670C/CH H/HLL 67CH TCH 698G 8G/II/III 70D 6H/HLL 8G TC6H 80G ) Engine O/H Piston-Liner Main Bearing Thrust Bearing ConRod Bearing ) Engine I/F TRE0780 TRE66 TRE668 TRE6908 (RE0) ) TRE66097 TRE69.00 TRE69.00 TRE TRE66097A (*) a) TRE TRE66B.00 (8) TRE668B.00 (8) TRE6908B.00(8) ( ) w/c. Rod R00 * b) TRE6680 c) TR77 ) TIK66097 d) TR68 TIK66097A (*) e) TAR607 (*) w/c. Rod R00 f ) TR Use 6 Use Use 6 ) Front Seal ) Rear Seal ) Ring Gear ) Crankshaft ) Seal ) TRE0 () ) TRE7 ) TR88 (9T) or TR8 (T) ) TRE80 () ) TH Valve, Intake TR9806 TR ) O/H Gasket ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) Rocker Cover Gsk ) TRE06 ) TRE6608 ) TR66 ) TR ) TR Valve, Exhaust Insert, Valve ) Intake ) Exhaust TR9069 ) TR9806 TR979.0 TR98 O/S ) TR8687 TR990 O/S ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) TR08 X6 ) TR08 X () TR0 X () ) TR987 X ) Seal, Valve ) Lock, Valve ) TRE67 ) TR9889 ) Cyl Hd Cap Screw ) Tappet ) Tensioner, Belt ) Con Rod ) Oil Cooler ) TR86 X6 () ) TR6 X ) TRE8097 ) TRE00608 (m R00,) ) TRE6690 (7 Plates) TRE998 (9 Plates) ) Spring, Valve ) Rotator, Valve ) TR6 ) TRE6000 ) Water Pump ) Water Pump Cov ) Water Pump Gsk ) Pump, Oil ) TRE0077 (Standard Flow) TRE007 (High Flow) ) TRE0866 ) TR7 ) TRE09 Thermostat 0 TRE6 80 F or TRE076 (7) Injector, Pencil TRE6006 (Non Turbo) TRE8786 (Turbo) TRE6 (6) Seal TR9 TR8000 Fuel Transfer Pump TRE68 or TRE66 () () Use TR08 Rod Bolts with Machine Split Connecting Rods, and use TR0 Rod Bolts with Fractured Split Connecting Rods. () Replace all R788 Cap Screws with Flanged Head Cap Screw TR86. () Crankshaft (m) R6076, R06. For Additional JOHN DEERE Products Refer to Page T7 () Line Connections are both threaded. () Piece Unitized Seal and Wearsleeve; Replaces TRE980, RE8097. (6) Use with Stanadyne DE0 Injection Pump. (7) Check application for proper usage. (8) Proper bearing journal radius must be maintained during the machining of the crankshaft to ensure proper operation. T7

86 PowerTech Model 608 High Comp. Piston L Bore:.6 in 6 mm Pin Ø:.8 in 7 mm Con Rod (m): R60 (ESN > 86,6) R00 (ESN 86,7 >) See Index ) Engine O/H ) Engine I/F ) TOK00 ) TIK00 6 ) Front Seal ) Rear Seal ) Crankshaft Gear ) Crankshaft ) Ring Gear 6) Rear Gear ) TAR90 ) TRE006 ) TR087 ) TRE00 () or TRE () ) TR88 6) TR66 Valve, Intake TR868 TR TR9.0 Piston-Liner Main Bearing Thrust Bearing TRE609 a) TRE70688 b) TRE08 c) TR777 d) TR66 e) TAR9880 f ) TEFN ) TRE060 ) TRE06 ) TRE7 ) TR798 () Valve, Exhaust TR869 TR9.00 TR9.0 TRE09 TRE096.0 Use 6 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket Insert, Valve ) Intake ) Exhaust ) TR9 ) TR9 ) TR7008 X6 ) TR66 X () ) TR876 X TRE098 TRE099.0 Use Thrust Washer TRE6 Use, Order Qty ) Plug Camshaft ) Oil Cooler ) Tappet ) Tensioner, Belt ) TR8007 ) TAR9 ) TR06 ) TRE8097 ) Cap, Valve ) Lock, Valve ) Shield, Valve ) TT09 ) TT0077 ) TR088 X6 () ConRod Bearing TR608 TRE767.0 Use 6 ) Pump, Water ) O ring Mount ) TRE0 ) TRE096 ) Spring, Valve ) TR98 (6) Thermostat 0 TAR F Pump, Oil TRE606 () With helical oil pump drive gear. Do not use with HPCR fuel system. () With straight oil pump drive gear. () With Aluminum Oil Pan use TR977 (RE08). () Use TR66 Rod Bolts with Machine Split Connecting Rods, and use TR00 Rod Bolts with Fractured Split Connecting Rods. () For Exaust Valves only. Do not use on ESN 00,000 and above. (6) Do not use on ESN 00,000 and above. T7 For Additional JOHN DEERE Products Refer to Page T7

87 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES PowerTech Model 608 Low Comp. Piston L Bore:.6 in 6 mm Pin Ø:.8 in 7 mm Con Rod (m): R60 (ESN > 86,6) R00 (ESN 86,7 >) ) Engine O/H ) Engine I/F ) TOK00 ) TIK00 Piston-Liner Main Bearing Thrust Bearing TRE086 a) TRE70689 b) TRE08 c) TR777 d) TR66 e) TAR9880 f ) TEFN TRE09 TRE096.0 Use 6 TRE098 TRE099.0 Use Thrust Washer TRE6 Use, Order Qty ConRod Bearing TR608 TRE767.0 Use 6 See Index 6 ) Front Seal ) Rear Seal Valve, Intake ) Crankshaft Gear ) Crankshaft ) Ring Gear 6) Rear Gear ) TAR90 ) TRE006 ) TR087 ) TRE00 () or TRE () ) TR88 6) TR66 TR868 TR TR9.0 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Head Gasket ) Oil Pan Gasket ) TRE060 ) TRE06 ) TRE7 ) TR798 () Valve, Exhaust TR869 TR9.00 TR9.0 Insert, Valve ) Intake ) Exhaust ) TR9 ) TR9 ) TR7008 X6 ) TR66 X () ) TR876 X ) Plug Camshaft ) Oil Cooler ) Tappet ) Tensioner, Belt ) TR8007 ) TAR9 ) TR06 ) TRE8097 ) Cap, Valve ) Lock, Valve ) Shield, Valve ) TT09 ) TT0077 ) TR088 X6 () ) Pump, Water ) O ring Mount ) TRE0 ) TRE096 ) Spring, Valve ) TR98 (6) Thermostat 0 TAR F Pump, Oil TRE606 () With helical oil pump drive gear. Do not use with HPCR fuel system. () With straight oil pump drive gear. () With Aluminum Oil Pan use TR977 (RE08). () Use TR66 Rod Bolts with Machine Split Connecting Rods, and use TR00 Rod Bolts with Fractured Split Connecting Rods. () For Exaust Valves only. Do not use on ESN 00,000 and above. (6) Do not use on ESN 00,000 and above. For Additional JOHN DEERE Products Refer to Page T7 T7

88 PowerTech Model L Bore:.66 in 8. mm Stroke:.00 in 6 mm ) Engine O/H ) Engine I/F Piston-Liner Main Bearing Thrust Bearing TRE69 a) TRE89 b) TRE96 c) TR707 d) TRE0609 (*) e) TAR9880 f ) TR960 TRE99 TRE90 ConRod Bearing TRE98 ) Front Seal ) Rear Seal ) Crankshaft ) Crankshaft, Gear ) Ring Gear ) TRE9 ) TRE0 ) TRE09 ) TR087 ) TR88 ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Head Gasket ) Bushing, Cam ) Head Gasket ) Camshaft ) Oil Pan Gasket ) Valve Cover 6) Intake Manifold Gskt ) TRE800 ) TRE80 ) TRE ) TR0777 () TR08 () ) TR788 TR6607 6) TR860 ) TR7008 X6 ) TR00 X ) TR7877 X6 ) TR88 ) Plug Camshaft ) Oil Cooler ) Tappet ) TR8007 ) TAR9 ) TRE086 ) Pump, Oil ) Tensioner, Belt ) TRE87 ) TRE8097 () ) TRE09 Valve, Intake Valve, Exhaust Insert, Valve ) Guide, Valve ) Lock, Valve ) Spring, Valve ) Seal, Valve Stm TR0 TR0 TR78 ) TR786 ) TR0798 ) TR0 ) TR987 (*) With Shim. () Paper. () Metal / Rubber. Thermostat Fuel Transfer Pump Water Pump () For Codes: 60, 607, 609, 6, 67, 68. () Electric Fuel Transfer Pump. 0 TRE00 80 F TRE976 () TRE09 T7 For Additional JOHN DEERE Products Refer to Page T7

89 Part Number TA877R TAL878 TAL8 TAL88 TAR06 TAR08 TAR080 TAR97 TAR9899 TAZ067 TAZ9 TAZ79 TH TL866 TL866 TL96 TL98 TL0 TL97 TL TL69 TL00 TL6 TL686 TL687 TMX0 TMX06 TR06796 TR8 TR608 TR69 TR6 TR6 TR66 TR78 TR879 TR879 TR88 TR60 TR76 TR98 TR99 TR99 TR9 TR06 TR69 TR7 TR7 TR8 TR698 TR707 TR79 TR986 TR9866 TR007 TR097 TR00 Description Bushing Bearing Disk Disk Seal, Teflon Seal, Teflon Disk Disk Seal, Hyd Pump Gatherer Chain Link Chain Pump, Fuel O ring, Sleeve C/S Gear Gear Shaft Shift Collar Gear Shaft Break Actuator Coupling Coupling Break Actuator Gasket Bushing Bushing, Grommet, Grommet O ring, Rocker Cover Ring Gear ( Teeth) Gasket, Rear Cover Packing, Hyd Pump Gasket, Water Pump Gasket, Water Pump Bushing Gasket, Fuel Pump Dust Bowl, Plastic Dust Bowl, Plastic Ring Gear (9 Teeth) Screw Washer, Injector Ring, Hyd Pump Clutch Plate Shaft Clutch Plate Gasket, Water Pump Gasket, Thermostat Gasket, Water Pump Gasket, Turbo Bushing Gasket, Gear House Gasket, Timing Gear Gasket, Aftercooler Gasket, Rocker Cover Gasket, Rocker Cover Gasket, Filter Base Gasket, Intake Gasket, Water Pump CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES Miscellaneous Parts Available from Maxiforce (Hyd. s, Gaskets, Seals, Disks and Others) Part Number TR06 TR96 TR97 TR08 TR6 TR0 TR6809 TR67 TR687 TR666 TR688 TR688 TR7766 TR780 TR7960 TR7960 TR79606 TR9068 TR9068 TR97 TR97 TR97 TR9980 TRE8790 TRE90 TRE90 TRE907 TRE909 TRE98 TRE986 TRE70 TT007 TT0088 TT0 TT09 TT0 TT0 TT068 TT067 TT669 TT976 TT9 TT9 TT8 TT866 TT99 TT006 TT0 TZ07 TZ066 TZ077 TZ0768 TZ0997 TZ TZ76 TZ8 Description Collar Shift Grommet Nut Gasket, Intake Gasket, Thermostat Gasket, Water Pump Gasket, Water Pump Gasket, Water Pump Gasket, Pump, Oil Washer, Thrust Filter Control Valve Clutch Plate Seat Nut, Tube Grommet, Injector Tee, Fitting (Thread) Gasket, Cover Gasket, Exhaust Gasket, Flyweel House Gasket, Timing Gear Gasket, Water Pump Hose, Adapter Seal, Hyd Pump, Hyd Pump, Hyd Pump, Hyd Pump, Hyd Pump Disk Disk Disk Gasket, Rocker Cover Ring Gear ( Teeth) Gasket, Thermostat Gasket, Thermostat House Gasket, Water Pump Gasket, Water Pump Gasket, Water Pump Gasket, Rocker Cover Bushing Gear/Engrane Drive Shaft Gasket, Thermostat Gasket, Water Pump Clutch Disk Beval Gear Gear Housign/Carcaza Wheel/Rueda Dentada Wheel/Rueda Dentada Cube/Cubo Hub Chain Sprocket Chain Sprocket Shaft/Eje Spacer John Deere is the registered trademark of Deere & Co., Moline, IL. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: T7

90 HOUSING KIT WITHOUT KIT WITH MARKED IMPELLER IMPELLER T60 TRE907 TRE668 T6 TRE907 TRE668 T9 TRE907 TRE668 T970 TMX998 TMX R899 TRE907 TRE668 R899 TMX998 TMX R8997 TRE907 TRE668 R09 (A) TRE907 TRE668 R09 (B) TMX98 TRE7 R96 TRE90 TMX R009 TMX8 TMX8 R0 (A) TRE907 TRE668 R0 (A) TRE907 TRE668 R0 (B) TMX98 TRE7 R6 (A) TRE907 TRE668 R6 (B) TMX98 TRE7 R78 (A) TRE907 TRE668 R78 (B) TMX98 TRE7 R97 TRE90 TRE8 R6787 TRE907 TMX R68 TRE90 TRE8 R909 TRE907 TRE668 R690 TRE907 TMX R6880 (A) TRE907 TRE668 R6880 (B) TMX98 TRE7 R660 TMX8 N/A R6788 (A) TRE907 TRE668 R6788 (B) TMX98 TRE7 R677 TRE9 N/A R687 TMX8 N/A R707 (A) TRE907 TRE668 R707 (B) TMX98 TRE7 R706 TRE90 TRE8 R760 (A) TRE907 TRE668 R760 (B) TMX98 TRE7 R7606 TRE90 TMX R77 TRE90 TMX R780 (A) TRE907 TRE668 R780 (B) TMX98 TRE7 R770 (A) TRE907 TRE668 R770 (B) TMX98 TRE7 R7886 (A) TRE907 TRE668 R7886 (B) TMX98 TRE7 R7887 TRE90 TRE8 R797 TRE90 TMX R797 (A) TRE907 TRE668 IT0 John Deere Water Pump Repair Identification Chart 00 Series Engines HOUSING KIT WITHOUT KIT WITH MARKED IMPELLER IMPELLER R797 (B) TMX98 TRE7 R8068 TRE9 N/A R8787 TRE9 N/A R9078 TRE90 TRE8 R9078 TRE90 TRE8 R97 TRE907 TRE668 R976 TRE90 TRE8 R9966 TRE90 TRE8 R0087 (A) TRE907 TRE668 R0087 (B) TMX98 TRE7 R068 TRE90 TRE8 R08 (A) TRE907 TRE668 R08 (B) TMX98 TRE7 R08 TRE907 TRE668 R798 TRE666 R008 TRE666 (A) Pulley is made of stamped steel (B) Pulley is made of cast iron. 00 Series Engines HOUSING KIT WITHOUT KIT WITH MARKED IMPELLER IMPELLER R67 TMX9 TAR67 R77 TMX9 TAR67 R96 TMX97 TAR98 R97 TMX97 TAR98 R977 TMX9 TAR67 R98 TMX9 TAR67 R TMX9 TAR69 R6 TMX97 TAR98 R8 TMX9 TAR69 R TMX0 N/A R TMX9 TAR69 R66 TMX0 N/A R008 TMX0 TMX7 R009 TMX0 TMX R68 TMX0 TMX R9 TMX9 TMX0 R87 TMX0 N/A R69 TMX0 TRE0967 TEL , , FAX 0.9.0

91 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES John Deere 00 Series Water Pump Repair Components KITS WITHOUT IMPELLERS KITS WITH IMPELLERS KIT REF. COMPONENTS KIT REF. COMPONENTS TRE907 T JD97 BEARING TAR09 SEAL KIT TT0 GASKET TT0 GASKET TT068 GASKET TR8 GASKET TR0 GASKET TR97 GASKET TRE668 TRE907 KIT TT0897 IMPELLER TRE8 TRE90 KIT TR68 IMPELLER TRE90 TJD86 BEARING TAR09 SEAL KIT TT8 GASKET TR6809 GASKET TT0 GASKET TMX TRE90 KIT TR0979 IMPELLER TRE9 TJD7686 BEARING TAR09 SEAL KIT TRE0767 SEAL TRE0768 SEAL TR80 SHAFT TT0 GASKET TR6809 GASKET TRE666 TJD98 BEARING TAR09 SEAL KIT TR08 GASKET TR0979 IMPELLER TT0 GASKET TMX998 TJD998 BEARING TAR09 SEAL KIT TT0 GASKET TT8 GASKET TMX TMX998 KIT TR0979 IMPELLER TMX98 T JD98 BEARING TAR09 SEAL KIT TT0 GASKET TR0 GASKET TRE7 TMX98 KIT TT0897 IMPELLER TMX8 T JD97 BEARING TAR09 SEAL KIT TT0 GASKET TMX TMX8 KIT TR0979 IMPELLER TMX8 TJD98 BEARING TAR09 SEAL KIT TR8 GASKET TT0 GASKET TMX8 TMX8 KIT TR0979 IMPELLER John Deere is the registered trademark of Deere & Co., Moline, IL. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IT

92 John Deere 00 Series Water Pump Repair Components KITS WITHOUT IMPELLERS KITS WITH IMPELLERS KIT REF. COMPONENTS KIT REF. COMPONENTS TMX97 T JD97 BEARING TAR69 SEAL KIT TT9 O'RING TR6 GASKET TR6 GASKET TMX9 T JD9 BEARING TAR69 SEAL KIT TR6 GASKET TR6 GASKET TMX9 T JD9 BEARING TAR69 SEAL KIT TR6 GASKET TR6 GASKET TMX0 T JD97 BEARING TAR09 SEAL KIT TR06 GASKET TR7 GASKET TR00 GASKET TR67 GASKET TMX9 T JD9 BEARING TAR69 SEAL KIT TR06 GASKET TR00 GASKET TMX0 TJD97 BEARING TAR09 SEAL KIT TR06 GASKET TR67 GASKET TAR98 TMX97 KIT TR0979 IMPELLER TAR67 TMX9 KIT TR0979 IMPELLER TAR69 TMX9 KIT TR0979 IMPELLER TMX TMX0 KIT TR68 IMPELLER TMX7 TMX0 KIT TR0 IMPELLER TMX0 TMX9 KIT TR0 IMPELLER TRE0967 TMX0 KIT TR7788 IMPELLER 00 SERIES WATER PUMP KITS ARE NOT AVAILABLE Individual Water Pump Components Available from Maxiforce (Other than Gaskets) TAR09 TAR69 TJD7686 TJD86 TJD9 TJD97 TJD9 TJD998 TJD98 SEAL KIT ( WITH FITTING TOOL) SEAL KIT BEARING BEARING BEARING BEARING BEARING BEARING BEARING TR0979 TR79 TR0 TR68 TR68 TR7788 TR99 TT0897 IMPELLER IMPELLER IMPELLER IMPELLER IMPELLER IMPELLER IMPELLER (PLASTIC) IMPELLER (CAST) IT TEL , , FAX 0.9.0

93 Engine Torque Specifications CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR JOHN DEERE DIESEL ENGINES ENGINE MODEL, 6, 79, 0, 9, 9, 60, 69, 69 09, 09, Lb.-ft. Lb.-ft. 76, 6 8 Lb.-ft. 9 Lb.-ft. 0, , 60, 666, 6076 CRANKSHAFT MAIN BEARING CAP BOLTS Dubuque (T0) built engines serial # up to 9999 / 8 Lb.-ft. serial # 0000 and after / 0 Lb.-ft Saran (CD) built engines serial # up to 60 / 8 Lb.-ft. serial # 6 and after / 0 Lb.-ft Dubuque (T0) built engines serial # up to 9999 / 8 Lb.-ft. serial # 0000 and after / 0 Lb.-ft Saran (CD) built engines serial # up to 60 / 8 Lb.-ft. serial # 6 and after / 0 Lb.-ft 6 0 Lb.-ft. 669, 60 0 Lb.-ft. CONROD BOLTS 0 Lb.-ft. plus an additional 90 0 Lb.-ft. plus an additional 90 0 Lb.-ft. Lb.-ft. plus an additional 90 Lb.-ft. plus an additional 90 Lb.-ft. plus an additional 90 CYLINDER HEAD BOLTS See John Deere service manual for your application See John Deere service manual for your application step - 7 Lb.-ft. step - 0 Lb.-ft. step - verify 0 Lb.-ft. after miniutes. step - turn an additional 60. step - 7 Lb.-ft. step - 0 Lb.-ft. step - verify 0 Lb.-ft. after miniutes step - turn an additional 60 See John Deere service manual for your application 8 Lb.-ft. 0 Lb.-ft. plus an additional 90 Power Tech Lb.-ft. 0 Lb.-ft. plus an additional 90 step - 7 Lb.-ft. step - 0 Lb.-ft. step - verify 0 Lb.-ft. after miniutes step - turn an additional 60 Power Tech 0, Lb.-ft. Lb.-ft. plus an additional 90 step - 7 Lb.-ft. step - 0 Lb.-ft. step - verify 0 Lb.-ft. after miniutes step - turn an additional 60 Power Tech Lb.-ft. Tongue and Groove Style Connecting Rods Lb.-ft. plus an additional 90 Fractured Split Style Connecting Rods 7 Lb.-ft. plus an additional 90 See John Deere service manual for your application John Deere is the registered trademark of Deere & Co., Moline, IL. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IT

94

95 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Introduction to Cummins Section Cummins B and C (Mid-Range) / CDC Family I and Family II ENGINE MODEL B.9 BT.9 BTA.9 6B.9 6BT.9 6BTA.9 Diesel Engine Models covered by this catalog CDC MODEL NUMBER OF CYLINDERS.90 Family I.90 Family I.90 Family I 6.90 Family I Family I Family I 6 Maxiforce Engine Composition for Cummins (Mid-Range) Applications B Series (Family I) - & 6 Cyl Piston s Include: Piston, Piston Pin, Piston Rings and Retainers BORE DIAMETER mm / In 0 /.06 0 /.06 0 /.06 0 /.06 0 /.06 0 /.06 6BTA.9 ISB 6.90 Family I 6 0 /.06 6CT Family II 6 /.8 6CTA Family II 6 /.8 COK: Engine Overhaul s Include: All Piston s, Main and s, Crankshaft Seals, Top and Bottom Gasket s, Piston and Camshaft Bushings. You may order std or oversize pistons. i.e: COK / or COK / No No of No No of Cyl Cyl CIK: Engine In-Frame s Include: All Piston s, Main and s, Top Gasket and Oil Pan Gasket. C Series (Family II) - 6 Cyl COK: Engine Overhaul s Include: All Cylinder s, Main and s, Front and Rear Crankshaft Seals, Top and Bottom Gasket s, Piston and Cam bushing. CIK: Engine In-Frame s Include: All Cylinder s, Main and s, Top Gasket and Oil Pan Gasket. Cummins is the registered trademark of Cummins Inc. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IC0

96 This chart offers CPL s (Control Parts List) for Cummins branded engines and for CDC branded engines used by Case industrial equipment and Case-IH agricultural equipment. The charts gives the listing of CPL numbers available with Maxiforce and will indicate the page number to the corresponding engine. When using the chart for Case and Case-IH (CDC engines) the reader will refer to the equipment models available and the corresponding page will be indicated. IC0 Engine Application Chart by CPL (Control Parts List) B - (.90) CPL PAGE 9 Marine C0 9 C0 9 C0 68 C0 690 C0 696 C0 70 C0 7 C0 7 Marine C0 7 C0 77 C0 70 C0 7 Marine C0 76 C0 76 C0 79 C0 87 C0 86 C0 8 C0 87 C0 88 C0 89 C0 97 C0 96 C0 97 C0 98 C0 986 C0 7 C0 7 C0 0 C0 0 C0 9 C0 60 C0 68 C0 77 C0 78 C0 87 C0 C0 08 C0 0 C0 C0 C0 C0 6 C0 6 C0 69 C0 89 Auto C0 9 C0 96 C07 96 C C C06 00 Auto C0 0 C0 B - (.90) Continued CPL PAGE 09 C06 C06 C06 9 Auto C0 6 C07 0 C06 0 Auto C0 0 C0 C06 9 C06 77 C0 C0 78 C06 8 C06 6 C06 67 C C06 87 C06 88 C06 6B - (6.90) CPL PAGE 96 C0 97 C08 99 C C09 69 C0 69 C C09 7 C09 7 Marine C0 7 C09 76 C08 79 C08 7 Marine C09 76 C08 79 Marine C0 79 C09 80 C0 80 C C08 8 C09 8 C0 86 C08 9 C09 98 C08 90 C09 9 C08 97 C08 6B - (6.90) Continued CPL PAGE 98 C08 99 C08 90 C08 9 Marine C 960 C0 96 C09 96 C Marine C 98 C C 99 C C C0 60 C08 6 C08 6 C 68 C08 7 C09 89 C08 07 C08 09 C09 C08 6 C08 7 Marine C 6 C 66 C08 79 C08 88 C08 89 Marine C08 C 0 C0 Marine C C 0 C0 C C0 0 C08 8 C09 9 C09 C09 C09 7 C 9 C 0 C Auto C Auto C Auto C 70 Marine C 79 C 8 C09 6 Marine C 67 C08 68 C 68 C08 TEL , FAX 0.9.0

97 CPL PAGE 8 C 86 C 86 C 888 Auto C 889 C7 89 Auto C 90 C 90 C6 9 Auto C 9 Auto C 96 Auto C 98 Marine C 98 C6 99 C 96 C6 96 C6 968 C 000 Auto C 0 C6 0 C6 06 C6 0 Auto C 0 Auto C 09 C08 00 C09 06 C7 07 C6 C6 6 C6 7 C 7 Auto C Auto C 9 Auto C Auto C Auto C 6 C 68 C 9 C 96 C6 0 C6 0 Auto C 08 C 6 C 7 Auto C 9 C 7 C6 7 C6 C08 7 C6 79 C7 0 C09 8 C6 868 C6 89 C C7 808 C7 808 C7 0 C8 076 C8 077 C8 098 C8 C9 6 C8 7 C8 8 C8 9 C9 96 C8 97 C8 98 C8 C8 C8 C8 C8 6 C8 7 C8 8 C8 9 C8 69 C8 70 C8 7 C8 9 C8 96 C8 97 C8 66 C8 67 C8 68 C8 69 C8 660 C8 66 C8 66 C8 66 C8 68 C8 686 C8 687 C8 86 C8 90 C8 90 C8 90 C8 90 C8 906 C9 907 C9 800 C8 80 C8 80 C8 80 C8 80 C9 80 C9 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Application Chart by CPL (Control Parts List) 6B - (6.90) Continued 6B - ISB 6CT - (6.80) Continued CPL PAGE CPL PAGE 6CT - (6.80) CPL PAGE 60 C0 60 C0 60 C 7 C0 7 C 7 C 89 C0 88 C0 80 C 89 C 9 C 9 C0 99 C 98 C 98 C0 C C C 8 C0 6 C 6 C 70 C 7 C 7 C0 7 C0 8 C0 8 Marine C C 66 C 7 C6 7 C6 77 C 99 C 06 C C 9 C 7 C 6 C7 69 C7 60 C0 6 C 6 C 68 C 6 C 668 C 68 C6 80 C 86 C 8 C 86 C 90 C 97 C7 90 C7 9 C7 99 Marine C 9 C 99 C 97 C7 007 C Cummins is the registered trademark of Cummins Inc. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IC0

98 Engine Application Chart by CPL (Control Parts List) 6CT - (6.80) Continued CPL PAGE 08 C7 08 C6 0 C 0 C 06 C 07 C 060 C 06 C 06 C 08 C 00 C 0 C7 0 C7 06 C7 08 C7 8 C 0 C 7 Marine C 8 C 9 C7 9 C7 96 C7 6 C 8 C 07 C7 67 C 68 C 80 C 8 C6 8 C6 C C7 6 C7 6 C 8 C 87 C 89 C 960 C 99 C 996 C 8089 C 86 C 980 C 980 C0 988 C IC0 TEL , , FAX 0.9.0

99 Equipment Application Chart CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) CASE - IH (Agricultural) CASE - IH (Agricultural) Continued MODEL REMARKS PAGE MODEL REMARKS PAGE 60 Combine PIN: JJC0070 > C09 6 Combine ESN > C Combine C0 666 Combine ESN 7066 > C0 670 Combine ESN > 706 C0 670 Combine ESN 7066 > C 680 Combine ESN > 706 C0 680 Combine ESN 7066 > C 688 Combine C 800 Cotton Harvester C0 8 Cotton Picker PIN: JJC0069 > C09 8 Cotton Picker PIN JJ006 > C 896 Tractor C08 0 Cotton Picker C09 0 Cotton Picker ESN > 706 C0 0 Cotton Picker ESN 7066 > C 0 Cotton Picker C 096 Tractor C09 Cotton Picker PIN > JJC060 C 66 Combine PIN > JJC C0 88 Combine PIN > JJC098 C 0 Tractor PISTON (m) 76 C0 0 Tractor PISTON (m) 76 C0 0 Tractor C0 0 Tractor C08 0 Tractor C0 0 Tractor C0 0 Tractor C0 0 Tractor C08 0 Tractor C Windrower C0 600 Windrower C0 690 Tractor C0 70 Tractor C0 70 Tractor C0 70 Tractor C0 70 Tractor ESN > 706 C0 70 Tractor ESN 7066 > C 70 Tractor ESN > 706 C0 70 Tractor ESN 7066 > C 70 Tractor C0 70 Tractor PIN > JJA C0 880 Windrower C0 880 Windrower C0 880 Windrower C Windrower C Windrower C06 90 Tractor ESN > 706 C0 90 Tractor ESN > 706 C0 90 Tractor C0 90 Tractor ESN > 706 C0 90 Tractor ESN 7066 > C 90 Tractor C0 90 Tractor ESN 7066 > C 90 Tractor PIN > JEE00600 C0 90 Tractor C CASE (Construction) MODEL REMARKS PAGE 90XT Skid Loader PIN >JAF 0 C06 9XT Skid Loader PIN >JAF 0796 C06 0C Crawler PISTON (m) 76 C0 0C Crawler PISTON (m) 6 C0 C Crawler PISTON (m) 76 C0 C Crawler PISTON (m) 6 C0 80E Backhoe C0 80E LL Backhoe C0 80F Backhoe PISTON (m) 6 C0 80F LL Backhoe PISTON (m) 6 C0 0 Crawler PISTON (m) 76 C0 0 Crawler PISTON (m) 6 C0 0E Crawler PISTON (m) 76 C0 0E Crawler PISTON (m) 6 C0 0G Crawler PISTON (m) 76 C0 70LXT Backhoe PISTON (m) 76 C0 70 LXT Series PISTON (m) 867 C06 80K Backhoe PISTON (m) 76 C0 80K Backhoe PISTON (m) 6 C0 80L Backhoe PISTON (m) 76 C0 80L Series PISTON (m) 867 C06 80SE Backhoe PISTON (m) 76 C0 80SE Backhoe PISTON (m) 6 C0 80SK Backhoe PISTON (m) 76 C0 80SK Backhoe PISTON (m) 6 C0 80SL Backhoe C0 8E Forklift C0 8E Forklift C0 86E Forklift C0 90SL Backhoe PISTON (m) 76 C0 90SL Series PISTON (m) 867 C06 6/B Wheel Loader C08 60G Crawler PISTON (m) 76 C0 60G Crawler PISTON (m) 867 C Trencher C0 680K/L Backhoe C0 680L Backhoe C08 Cummins is the registered trademark of Cummins Inc. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IC0

100 Equipment Application Chart CASE (Construction) Continued MODEL REMARK PAGE 686G Telescopic Handler C06 686GXR Telescopic Handler C Excavator C0 7 Loader C0 7B Loader PIN > JEE000 C0 760 Trencher C0 780C/D Backhoe C08 8 Loader C0 8B Loader PIN > JEE0060 C0 80D/E Crawler PISTON (m) 76 C08 80D/E Crawler PISTON (m) 6 C0 8D/E Crawler PISTON (m) 6 C0 8D/E/G Crawler PISTON (m) 76 C Trencher C0 880D Crawler C Excavator C08 08B/C Excavator C08 086B Excavator C Excavator C08 0E Crawler C0 0E/G Excavator C08 E Excavator C08 E Crawler C0 87C Excavator ESN > 706 C0 0 Crawler ESN > 706 C0 80 Skid Steer Loader C0 8C Skid Steer Loader C0 680TA Power Unit C 880 Windrower C Crawler C0 900B Excavator PIN >DAC0#00 C0 900B Excavator PIN >DAC0#00 C Excavator PIN >DAC0#00 C0 900B Excavator PIN >DAC0#00 C06 900/B Excavator C Excavator C0 900B Excavator PIN > DAC#00 C0 WB Wheel Loader C0 WB/C Wheel Loader PISTON (m) 76 C08 WB/C Wheel Loader PISTON (m) 6 C0 W6 Loader C0 IC06 TEL , FAX 0.9.0

101 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL BT.9 (CDC.90) TURBOCHARGED NON - EMISSION 9 Cubic Inch Piston Std (m): 76 CUMMINS CPL s CASE-IH (Agricultural) 7 6 ) Front Seal 0 Tractor ) Rear Seal Windrower CASE (Construction) 0C Crawler C 0 0E 0G 70LXT Backhoe 80K 80L 80SE 80SK 80SL 90SL 60G Crawler 688 Excavator 860 Trencher 900 Crawler WB Wheel Loader ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C80896 ) C807 ) C99 ) C960 ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C9000 () ) C90779 X C90780 X0 Eng. O/H & I/F ) Piston * Main Bearing COK60/ ) Repair Sleeve C8000 C9070 COK/ 0.0 mm ) C8060 C mm C mm COK/.00 mm C mm C mm C mm C80.00 mm C800 C mm COK60F/ 0.7 mm COKF/ 0.0 mm Use C8969 COKF/.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9076 Piston Std, C800 Ring Std, C9079 Piston Pin, C90706 Ret. ) C9088 Piston 0.0 mm, C80 Ring 0.0 mm, C9079 Piston Pin, C90706 Ret. ) C90886 Piston.00 mm, C80 Ring.00 mm, C9079 Piston Pin, C90706 Ret. ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X ) C9006 X () ) C90099 ) C9069 (7) C9979 (8) ) C99 ) Intake, Valve ) Insert, Valve ) Exhaust, Valve ) Insert, Valve ) C80 ) C806 C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use Use ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X8 ) C960 X8 () C979 X8 (6) ) C90099 X8 () ( ) On Fracture Split Con Rods use: of C9070 (or O/S) and of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Machine split connecting rod. (8) Fracture split connecting rod. (9) Use ESN or application model to confirm correct camshaft. C0 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C98 (9) ) C90 ) C90679 ) C908 X C9080 X ) C907 ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C97 ) C96760 ) C9979

102 BTA.9 (CDC.90) TURBOCHARGED AFTERCOOLED NON - EMISSION 9 Cubic Inch Piston Std (m): 76 CUMMINS CPL s * 0 * Marine Engine CASE-IH (Agricultural) 800 Cotton Harvester 0 Tractor CASE (Construction) 900B Excavator, (PIN: >DAC0#00) 900 Excavator, (PIN: >DAC0#00) ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C0 Engine Model CPL 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C80896 ) C807 ) C99 ) C960 ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C9000 () ) C90779 X C90780 X0 ( ) On Fracture Split Con Rods use: of C9070 (or O/S) and of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Machine split connecting rod. (8) Fracture split connecting rod. (9) Use ESN or application model to confirm correct camshaft. For Additional CUMMINS Products Refer to Page C8 Eng. O/H & I/F ) Piston * Main Bearing COK00/ ) Repair Sleeve C8000 C9070 COK0/ 0.0 mm ) C8000 C mm C mm COK0/.00 mm C mm C mm C mm C mm C800 C mm COK00F/ 0.7 mm COK0F/ 0.0 mm Use C8969 COK0F/.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9076 Piston Std, C800 Ring Std, C9079 Piston Pin, C90706 Ret. ) C9077 Piston 0.0 mm, C80 Ring 0.0 mm, C9079 Piston Pin, C90706 Ret. ) C9078 Piston.00 mm, C80 Ring.00 mm, C9079 Piston Pin, C90706 Ret. ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X ) C9006 X () ) C90099 ) C9069 (7) C9979 (8) ) C99 ) Intake, Valve ) Insert, Valve ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C98 ) C90 ) C90679 ) C908 X C9080 X ) C907 ) Exhaust, Valve ) Insert, Valve ) C80 ) C806 C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use Use ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C97 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X8 ) C960 X8 () C979 X8 (6) ) C90099 X8 ()

103 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL B.9 (CDC.90) NATURALLY ASPIRATED NON - EMISSION 9 Cubic Inch Piston Std (m): 6 CUMMINS CPL s 9 * * * Marine Application CASE-IH (Agricultural) Windrower ) Front Seal 600 ) Rear Seal CASE (Construction) 0C Crawler C 80E Backhoe 80E LL 80F 80F LL 0 Crawler 0E 80K Backhoe 80SE 80SK 8E Forklift 8E 86E 660 Trencher Skid Steer Loader 8C ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C80896 ) C807 ) C99 ) C960 ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C9000 () ) C90779 X C90780 X0 Eng. O/H & I/F ) Piston * Main Bearing COK060/ ) Repair Sleeve C8000 C9070 COK06/ 0.0 mm ) C80060 C mm C mm COK06/.00 mm C mm C mm C mm C mm C800 C mm COK060F/ 0.7 mm COK06F/ 0.0 mm Use C8969 COK06F/.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C906 Piston Std, C8000 Ring Std, C9079 Piston Pin, C90706 Ret. ) C90609 Piston 0.0 mm, C800 Ring 0.0 mm, C9079 Piston Pin, C90706 Ret. ) C90608 Piston.00 mm, C800 Ring.00 mm, C9079 Piston Pin, C90706 Ret. ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X ) C9006 X () ) C90099 ) C9069 (7) C9979 (8) ) C99 ) Intake, Valve ) Insert, Valve ( ) On Fracture Split Con Rods use: of C9070 (or O/S) and of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Machine split connecting rod. (8) Fracture split connecting rod. (9) Use ESN or application model to confirm correct camshaft. C0 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C98 (9) ) C90 ) C90679 ) C908 X C9080 X ) C907 ) Exhaust, Valve ) Insert, Valve ) C80 ) C806 C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use Use ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C97 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X8 ) C960 X8 () C979 X8 (6) ) C90099 X8 ()

104 Engine Model CPL BT.9 TURBOCHARGED EMISSION 9 Cubic Inch Piston Std (m): 66 AUTOMOTIVE CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C0 Eng. O/H & I/F ) Piston * Main Bearing COK6/ ) Repair Sleeve C8000 C9070 COK6/ 0.0 mm ) C806 C mm C mm COK6/.00 mm C mm C mm C mm C mm C800 C mm COK6F/ 0.7 mm COK6F/ 0.0 mm Use C8969 COK6F/.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C966 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C966 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C966 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C80896 ) C807 ) C99 ) C960 ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C9000 () ) C90779 X C90780 X0 ( ) On Fracture Split Con Rods use: of C9070 (or O/S) and of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Machine split connecting rod. (8) Fracture split connecting rod. (9) Use ESN or application model to confirm correct camshaft. For Additional CUMMINS Products Refer to Page C8 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X ) C9006 X () ) C90099 ) C9069 (7) C9979 (8) ) C99 ) Intake, Valve ) Insert, Valve ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C98 (9) ) C90 ) C90679 ) C908 X C9080 X ) C907 ) Exhaust, Valve ) Insert, Valve ) C80 ) C806 C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use Use ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C97 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X8 ) C960 X8 () C979 X8 (6) ) C90099 X8 ()

105 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL BTA.9 TURBOCHARGED AFTERCOOLED EMISSION 9 Cubic Inch Piston Std (m): 90 CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 Eng. O/H & I/F ) Piston * Main Bearing COK8/ ) Repair Sleeve C8000 C9070 COK9/ 0.0 mm ) C808 C mm C mm COK0/.00 mm C mm C mm C mm C mm C800 C mm COK8F/ 0.7 mm COK9F/ 0.0 mm Use C8969 COK0F/.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C990 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C990 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C990 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C80896 ) C807 ) C99 ) C960 ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C9000 () ) C90779 X C90780 X0 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X ) C9006 X () ) C90099 ) C9069 (7) C9979 (8) ) C99 ) Intake, Valve ) Insert, Valve ( ) On Fracture Split Con Rods use: of C9070 (or O/S) and of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Machine split connecting rod. (8) Fracture split connecting rod. (9) Use ESN or application model to confirm correct camshaft. C0 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C98 (9) ) C90 ) C90679 ) C908 X C9080 X ) C907 ) Exhaust, Valve ) Insert, Valve ) C80 ) C806 C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use Use ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C97 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X8 ) C960 X8 () C979 X8 (6) ) C90099 X8 ()

106 BTA.9 (CDC.90) TURBOCHARGED AFTERCOOLED EMISSION 9 Cubic Inch Piston Std (m): 867 CUMMINS CPL s ) Front Seal CASE-IH (Agricultural) ) Rear Seal 8860 Windrower 8870 CASE (Construction) 90 XT Skid Loader, (PIN: >JAF 0) 9 XT Skid Loader, (PIN: >JAF 0796) 70 LXT Series 80 L 90 SL 60 G Crawler 686 G Telescopic Handler 686 GXR 900 B Excavator, (PIN: >DAC0#00) 900 B Excavator, (PIN: >DAC0#00) ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C06 Engine Model CPL a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C80896 ) C807 ) C99 ) C960 ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C9000 () ) C90779 X C90780 X0 For Additional CUMMINS Products Refer to Page C8 Eng. O/H & I/F ) Piston * Main Bearing COK77/ ) Repair Sleeve C8000 C9070 COK76/ 0.0 mm ) C8077 C mm C mm COK76/.00 mm C mm C mm C mm C mm C800 C mm COK77F/ 0.7 mm COK76F/ 0.0 mm Use C8969 COK76F/.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9867 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C9867 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C9867 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X ) C9006 X () ) C90099 ) C9069 (7) C9979 (8) ) C99 ) Intake, Valve ) Insert, Valve ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C98 (9) ) C90 ) C90679 ) C908 X C9080 X ) C907 ) Exhaust, Valve ) Insert, Valve ) C80 ) C806 C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use Use ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C97 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X8 ) C960 X8 () C979 X8 (6) ) C90099 X8 () ( ) On Fracture Split Con Rods use: of C9070 (or O/S) and of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Machine split connecting rod. (8) Fracture split connecting rod. (9) Use ESN or application model to confirm correct camshaft.

107 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL BT.9 TURBOCHARGED Piston Std (m): 087 CUMMINS CPL s 96 6 ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 Eng. O/H & I/F ) Piston * Main Bearing COK77/ ) Repair Sleeve C8000 C9070 COK78/ 0.0 mm ) C8077 C mm C mm COK79/.00 mm C mm C mm C mm C mm C800 C mm COK77F/ 0.7 mm COK78F/ 0.0 mm Use C8969 COK79F/.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9087 Piston Std, C8070 Ring Std, C907 Piston Pin, C9069 Ret. ) C9088 Piston 0.0 mm, C8086 Ring 0.0 mm, C907 Piston Pin, C9069 Ret. ) C9089 Piston.00 mm, C8086 Ring.00 mm, C907 Piston Pin, C9069 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C80896 ) C807 ) C99 ) C960 ) C ) C96 7) C989 Guide, Valve For Additional CUMMINS Products Refer to Page C8 C9008 ) C80 Thick W mm IN C9009 C907 Valve X Thick W..7 mm EX C9000 Collet X C90606 () ) C9068 Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C9000 () ) C90779 X C90780 X0 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X ) C9006 X () ) C90099 ) C9069 (7) C9979 (8) ) C99 ) Intake, Valve ) Insert, Valve ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C98 (9) ) C90 ) C90679 ) C908 X C9080 X ) C907 ) Exhaust, Valve ) Insert, Valve ) C806 ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C97 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X8 ) C960 X8 () C979 X8 (6) ) C90099 X8 () C90607 Valve X C9000 Collet X ) C900 Use Use ( ) On Fracture Split Con Rods use: of C9070 (or O/S) and of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Machine split connecting rod. (8) Fracture split connecting rod. (9) Use ESN or application model to confirm correct camshaft. C07

108 6BT.9 (CDC 6.90) TURBOCHARGED NON - EMISSION 9 Cubic Inch Piston Std (m): 76 CUMMINS CPL s * * Marine Engine CASE-IH (Agricultural) 7 6 ) Front Seal 896 Tractor ) Rear Seal CASE (Construction) 6/B Wheel Loader 680L Backhoe 780C/D 80D/E Crawler 8D/E/G 880D 888 Excavator 08B/C 086B 088 0E/G E 880 Windrower 900/B Excavator WB/C Wheel Loader ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C08 Engine Model CPL Eng. O/H & I/F ) Piston * Main Bearing COK60/6 ) Repair Sleeve C80070 C9070 COK/6 0.0 mm ) C8060 C mm C mm COK/6.00 mm C mm C mm C mm C80.00 mm C8007 C mm COK60F/6 0.7 mm COKF/6 0.0 mm Use 6 C8969 COKF/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9076 Piston Std, C800 Ring Std, C9079 Piston Pin, C90706 Ret. ) C9088 Piston 0.0 mm, C80 Ring 0.0 mm, C9079 Piston Pin, C90706 Ret. ) C90886 Piston.00 mm, C80 Ring.00 mm, C9079 Piston Pin, C90706 Ret. a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk Guide, Valve ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X For Additional CUMMINS Products Refer to Page C8 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 ) Exhaust,Valve ) Insert, Valve ) C806 C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod.

109 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6BTA.9 (CDC 6.90) TURBOCHARGED AFTERCOOLED NON - EMISSION 9 Cubic Inch Piston Std (m): 76 CUMMINS CPL s * * Marine Engine CASE-IH (Agricultural) 60 Combine, (PIN: JJC0070 >) 6 Combine, (ESN >) 8 Cotton Picker, (PIN: JJC0069 >) 0 Cotton Picker 096 Tractor ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X Eng. O/H & I/F ) Piston * Main Bearing COK00/6 ) Repair Sleeve C80070 C9070 COK0/6 0.0 mm ) C8000 C mm C mm COK0/6.00 mm C mm C mm C mm C mm C8007 C mm COK00F/6 0.7 mm COK0F/6 0.0 mm Use 6 C8969 COK0F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9076 Piston Std, C800 Ring Std, C9079 Piston Pin, C90706 Ret. ) C9077 Piston 0.0 mm, C80 Ring 0.0 mm, C9079 Piston Pin, C90706 Ret. ) C9078 Piston.00 mm, C80 Ring.00 mm, C9079 Piston Pin, C90706 Ret. ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod. C09

110 6B * * 999 * Marine Engine 7 6 ) Front Seal CASE-IH (Agricultural) ) Rear Seal 0 Tractor 0 CASE (Construction) 680K/L Backhoe 80D/E Crawler 8D/E WB/C Wheel Loader ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C0 Engine Model CPL a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve (CDC 6.90) Eng. O/H & I/F ) Piston * Main Bearing NATURALLY ASPIRATED COK060/6 ) Repair Sleeve C80070 C9070 COK06/6 0.0 mm ) C80060 C mm C mm NON - EMISSION COK06/6.00 mm C mm C mm C mm 9 Cubic Inch C mm C8007 C mm COK060F/6 0.7 mm Piston Std (m): 6 COK06F/6 0.0 mm Use 6 C8969 COK06F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C906 Piston Std, C8000 Ring Std, C9079 Piston Pin, C90706 Ret. ) C90609 Piston 0.0 mm, C800 Ring 0.0 mm, C9079 Piston Pin, C90706 Ret. CUMMINS CPL s ) C90608 Piston.00 mm, C800 Ring.00 mm, C9079 Piston Pin, C90706 Ret. C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X For Additional CUMMINS Products Refer to Page C8 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod.

111 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) 6BT.9 (CDC 6.90) TURBOCHARGED NON - EMISSION 9 Cubic Inch Piston Std (m): 00 CUMMINS CPL s 9 * 970 * 6 7 * * 70 * 6 * * Engine Model CPL * Marine Engines ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X Eng. O/H & I/F ) Piston * Main Bearing COK00/6 ) Repair Sleeve C80070 C9070 COK09/6 0.0 mm ) C8070 C mm C mm COK00/6.00 mm C mm C mm C mm C mm C8007 C mm COK00F/6 0.7 mm COK09F/6 0.0 mm Use 6 C8969 COK00F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C900 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C909 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C900 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 C907 Valve X C9000 Collet X ) C9068 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 C90607 Valve X C9000 Collet X ) C900 Use 6 Use 6 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod. C

112 Engine Model CPL 6BT.9 TURBOCHARGED EMISSION 9 Cubic Inch Piston Std (m): 66 AUTOMOTIVE CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C Eng. O/H & I/F ) Piston * Main Bearing COK6/6 ) Repair Sleeve C80070 C9070 COK6/6 0.0 mm ) C806 C mm C mm COK6/6.00 mm C mm C mm C mm C mm C mm C mm COK6F/6 COK6F/6 0.0 mm Use 6 C8969 COK6F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C966 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C966 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C966 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X For Additional CUMMINS Products Refer to Page C8 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod.

113 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6BTA.9 TURBOCHARGED AFTERCOOLED EMISSION 9 Cubic Inch Piston Grade A (m): 7 Grades B & C are not offered by Maxiforce CUMMINS CPL s 9 0 * * * Automotive Engines ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 Eng. O/H & I/F ) Piston * Main Bearing COK87/6 ) Repair Sleeve C80070 C9070 COK9/6 0.0 mm ) C8087 C mm C mm COK9/6.00 mm C mm C mm C mm C mm C8007 C mm COK87F/6 0.7 mm COK9F/6 0.0 mm Use 6 C8969 COK9F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C97 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C97 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C97 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod. C

114 Engine Model CPL 6BTA.9 TURBOCHARGED AFTERCOOLED EMISSION 9 Cubic Inch Piston Std (m): 769 CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C Eng. O/H & I/F ) Piston * Main Bearing COK/6 ) Repair Sleeve C80070 C9070 COK/6 0.0 mm ) C80 C mm C mm COK/6.00 mm C mm C mm C mm C80.00 mm C mm C mm COKF/6 COKF/6 0.0 mm Use 6 C8969 COKF/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9769 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C9907 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C9908 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X For Additional CUMMINS Products Refer to Page C8 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod.

115 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6BTA.9 TURBOCHARGED AFTERCOOLED EMISSION 9 Cubic Inch Piston Std (m): 90 CUMMINS CPL s 79 ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 Eng. O/H & I/F ) Piston * Main Bearing COK8/6 ) Repair Sleeve C80070 C9070 COK9/6 0.0 mm ) C808 C mm C mm COK0/6.00 mm C mm C mm C mm C mm C mm C mm COK8F/6 COK9F/6 0.0 mm Use 6 C8969 COK0F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C990 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C990 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C990 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Intake,Valve ) Insert, Valve ) C80 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod. C

116 Engine Model CPL 6BTA.9 TURBOCHARGED AFTERCOOLED EMISSION 9 Cubic Inch Piston Std (m): 867 CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 C6 Eng. O/H & I/F ) Piston * Main Bearing COK77/6 ) Repair Sleeve C80070 C9070 COK76/6 0.0 mm ) C8077 C mm C mm COK76/6.00 mm C mm C mm C mm C mm C mm C mm COK77F/6 COK76F/6 0.0 mm Use 6 C8969 COK76F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9867 Piston Std, C800 Ring Std, C907 Piston Pin, C90706 Ret. ) C9867 Piston 0.0 mm, C80 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C9867 Piston.00 mm, C80 Ring.00 mm, C907 Piston Pin, C90706 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 For Additional CUMMINS Products Refer to Page C8 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) Intake,Valve ) Insert, Valve ) C80 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) C969 ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Exhaust,Valve ) Insert, Valve ) C806 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod.

117 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6BTA.9 TURBOCHARGED AFTERCOOLED Piston Std (m): 087 CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C808 ) C ) C807 Eng. O/H & I/F ) Piston * Main Bearing COK77/6 ) Repair Sleeve C80070 C9070 COK78/6 0.0 mm ) C8077 C mm C mm COK79/6.00 mm C mm C mm C mm C mm C mm C mm COK77F/6 COK78F/6 0.0 mm Use 6 C8969 COK79F/6.00mm ) C9066 C mm C mm To order an In-Frame Use C mm change OK to IK * Piston consists of: ) C9087 Piston Std, C8070 Ring Std, C907 Piston Pin, C9069 Ret. ) C9088 Piston 0.0 mm, C8086 Ring 0.0 mm, C907 Piston Pin, C9069 Ret. ) C9089 Piston.00 mm, C8086 Ring.00 mm, C907 Piston Pin, C9069 Ret. 7 6 ) Front Seal ) Rear Seal a b ) Pump, Oil a) Lift Pump b) Lift Pump ) C960 a) C98000 b) C907 () ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Rectangular Seal 7) Crankshaft, Gear ) C90 ) C978 ) C90780 ) C ) C ) C97 7) C908 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk 7) Rear Cover Gsk ) C806 ) C8076 ) C99 ) C96 (7) ) C ) C96 7) C989 Guide, Valve C9008 Thick W mm IN C9009 Thick W..7 mm EX C90606 () Thin Wall For Additional CUMMINS Products Refer to Page C8 ) Cylinder Head (With Valves) ) Head Bolts ) C98 () ) C90779 X6 C90780 X ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod ) Bolt, Ex Manifold ) C8978 X6 ) C9006 X () ) C90099 ) C9069 (8) C9979 (8) ) C99 ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) N/A ) C90 ) C90679 ) C908 X6 C9080 X6 ) C907 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C96760 ) C9979 ) Intake,Valve ) Exhaust,Valve ) Spring, Valve ) Insert, Valve ) Insert, Valve ) Seal, Valve ) Retainer, Valve ) C80 ) C806 ) C90076 X ) C960 X () C979 X (6) ) C90099 X () C907 Valve X C90607 Valve X C9000 Collet X C9000 Collet X ) C9068 ) C900 Use 6 Use 6 ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Can be Used on Both Intake and Exhaust. () Diaphragm Style. () For Storm blocks use C9009. () Do not use on Marine Engines. () For use on engines prior to April, 00. (6) For use on engines from April, 00, (Top Hat Style). (7) Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. (8) C9069 Machine Split rod. C9979 Fracture Split rod. C7

118 Engine Model CPL 6BTA.9 ISB ) Water Pump ) Water Pump Seal ), Thermostat ) C8677 () ) C ) C9679 C8 VALVE 9 Cubic Inch Piston Grade A (m): 6 Grades B & C are not offered by Maxiforce CUMMINS CPL s Eng. O/H & I/F COK078/6 COK078/6 0.0 mm COK078/6.00 mm COK078F/6 6 ) Pump, Oil ) Lift Pump ) Front Seal ) Rear Seal ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Crankshaft, Gear ) C90 ) C978 ) C9 () ) C ) C966 6) C9907 ) C9987 () ) C98 ) Piston * ) Repair Sleeve ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk ) C0900 ) C80087 ) C97706 ) C96 () ) C9878 6) C908 ) Intake, Valve ) Insert, Valve ) Cylinder Head (With Valves) ) Head Bolts ) N/A ) C9706 X6 ) C8978 X6 ) C9009 X ) C90099 ) C9069 () C9979 (6) For Additional CUMMINS Products Refer to Page C8 ) Bushing, Piston ) Bushing, Cam ) Bolt, Con Rod ) Con Rod Main Bearing ) C80078 C80070 C9070 C mm C mm C mm C mm C mm C mm C mm C mm COK078F/6 0.0 mm Use 6 COK078F/6.00mm C8969 ) C9066 C To order an In-Frame C mm change OK to IK C mm in above part number Use * Piston consists of: ) C96 Piston Std, C80990 Ring Std, C907 Piston Pin, C90706 Ret. ) C966 Piston 0.0 mm, C8060 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C967 Piston.00 mm, C8060 Ring.00 mm, C907 Piston Pin, C90706 Ret. ) Exhaust, Valve ) Insert, Valve ) C809 ) C80967 C907 Valve X C907 Valve X C90 Collet X C90 Collet X ) C97068 ) C909 Use Use ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) N/A ) C96 ) C9 ) C997 X6 C998 X6 ) C97 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C99 ) C99 ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C96 X ) C9989 X C98 X ) C998 X ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Include Crankshaft Gear C9907. () With Hardened Pulley. () With Helical Gears. () Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. () Machine split connecting rod. (6) Fracture split connecting rod.

119 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6BTA.9 ISB VALVE 9 Cubic Inch Piston Grade A (m): 600 Grades B & C are not offered by Maxiforce CUMMINS CPL s ) Water Pump ) Water Pump Seal ), Thermostat ) C8677 () ) C ) C9679 Eng. O/H & I/F COK088/6 COK08/6 0.0 mm COK08/6.00 mm COK088F/6 6 ) Pump, Oil ) Lift Pump ) Front Seal ) Rear Seal ) Crankshaft ) Front Seal Sleeve ) Rear Seal Sleeve 6) Crankshaft, Gear ) C90 ) C978 ) C9 () ) C ) C966 6) C9907 ) C9987 () ) C98 ) Piston * ) Repair Sleeve ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gsk 6) Gear Housing Gsk ) C0900 ) C80087 ) C97706 ) C96 () ) C9878 6) C908 ) Intake, Valve ) Insert, Valve ) C8978 X6 ) C9009 X ) C90099 ) C9069 () C9979 (6) ) Exhaust, Valve ) Insert, Valve ) C809 ) C80967 C907 Valve X C907 Valve X C90 Collet X C90 Collet X ) C97068 ) C909 Use Use ) Cylinder Head (With Valves) ) Head Bolts ) N/A ) C9706 X6 ) Bushing, Piston ) Bushing, Cam Main Bearing ) Spring, Valve ) Seal, Valve ) Retainer, Valve ) C96 X ) C9989 X C98 X ) C998 X ( ) On Fracture Split Con Rods use: 6 of C9070 (or O/S) and 6 of C8969 (or O/S). () Include Crankshaft Gear C9907. () With Hardened Pulley. () With Helical Gears. () Applications with internally cast oil suction tube in Aluminum oil pan, must use 986 oil pan gasket. () Machine split connecting rod. (6) Fracture split connecting rod. ) C80088 C80070 C9070 C mm C mm C mm C mm C mm C mm C mm COK08F/6 0.0 mm Use 6 C mm COK08F/6.00mm C8969 ) C9066 C To order an In-Frame C mm change OK to IK C mm in above part number Use * Piston consists of: ) C9600 Piston Std, C80990 Ring Std, C907 Piston Pin, C90706 Ret. ) C960 Piston 0.0 mm, C8060 Ring 0.0 mm, C907 Piston Pin, C90706 Ret. ) C960 Piston.00 mm, C8060 Ring.00 mm, C907 Piston Pin, C90706 Ret. ) Bolt, Con Rod ) Con Rod ) Camshaft ) Tappet ) Push Rod ) Rocker Arms ) Camshaft Gear ) N/A ) C96 ) C9 ) C997 X6 C998 X6 ) C97 ) Oil Cooler 7 Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C98 ) C99 ) C99 For Additional CUMMINS Products Refer to Page C8 C9

120 Engine Model CPL 6CT 8. (CDC 6.80) TURBOCHARGED Piston Std (m): 6, 96, 998 CUMMINS CPL s CASE-IH (Agricultural) 660 Combine 666 Combine, ESN 7066 > 670 Combine, ESN > Combine, ESN > Cot Picker, ESN > Combine, PIN > JJC Tractor 70 Tractor 70 Tractor 70 Tractor, ESN > Tractor, ESN > Tractor 70 Tractor, PIN > JJA Tractor, ESN > Tractor, ESN > Tractor 90 Tractor, ESN > Tractor 90 Tractor, PIN > JEE00600 CASE (Construction) 7 Loader 7B Loader, PIN > JEE000 8 Loader 8B Loader, PIN > JEE0060 0E Crawler E Crawler 87C Excav, ESN > Crawler, ESN > Excavator 900B Excav, PIN > DAC#00 W6 Loader ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x Engine Overhaul & Engine In Frame COK00 Thin Wall COK0 Thick Wall Long COK0S Thick Wall Short To order an In-Frame change OK to IK in above part number 7 ) Front Seal ) Rear Seal ) Crankshaft ) Front Wear Sleeve ) Rear Wear Sleeve 6) Front Rectangular Seal 7) Rear Rectangular Seal ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) 6 Cylinder Cylinder Cylinder Thin Wall ( ) Thick Wall ( ) Thick Wall ( ) Long Liner Short Liner C8000 C800 C800S a) C96 b) C9097 c) C90996 d) C808 e) C8070 ( C90779 Liner + C90777 Seal ) ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gasket 6) Front Gear Gasket 7) Front Cover Gasket 8) Rear Cover Gasket ) Intake, Valve ) Insert, Valve ) Exhaust, Valve ) Insert, Valve ) C806 ) C8008 C99 Valve X C9 Valve X C9077 Collet X C9077 Collet X ) C98 ) C98 Use 6 Use 6 ) C97998 ) C90 ) Top Gasket ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) Fuel Lift Pump ) Seal,Fuel Pump a) C96 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) a) C96 b) C9097 c) C90996 d) C808 e) C8008 ( C9809 Liner + C90777 Seal ) 7 ) Bushing, Piston ) Bushing, Camshaft ) Camshaft ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) C987 ) C987 ) C908 ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 806 (Thin Wall) Flange ø.". ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). ( ) Block 9906 (Thick Wall / Short Liner) Flange ø.", (Length: 9. / mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring C0 For Additional CUMMINS Products Refer to Page C8

121 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6CTA 8. (CDC 6.80) TURBOCHARGED AFTERCOOLED Piston Std (m): 6, 96,990 CUMMINS CPL s CASE-IH (Agricultural) 670 Combine, ESN 7066 > 680 Combine, ESN 7066 > 688 Combine 8 Cot Picker, PIN JJ006 > 0 Cot Picker, ESN 7066 > 0 Cot Picker Cot Picker, PIN > JJC Combine, PIN > JJC Tractor, ESN 7066 > 70 Tractor, ESN 7066 > 90 Tractor, ESN 7066 > 90 Tractor, ESN 7066 > 90 Tractor CASE (Construction) 680TA Power Unit ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x Engine Overhaul & Engine In Frame COK0 Thin Wall COK0 Thick Wall Long COK0S Thick Wall Short To order an In-Frame change OK to IK in above part number 7 ) Front Seal ) Rear Seal ) Crankshaft ) Front Wear Sleeve ) Rear Wear Sleeve 6) Front Rectangular Seal 7) Rear Rectangular Seal ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) 6 Cylinder Cylinder Cylinder Thin Wall ( ) Thick Wall ( ) Thick Wall ( ) Long Liner Short Liner C800 C800 C800S a) C96 b) C9097 c) C90996 d) C808 e) C8070 ( C90779 Liner + C90777 Seal ) ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gasket 6) Front Gear Gasket 7) Front Cover Gasket 8) Rear Cover Gasket ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) Intake, Valve ) Insert, Valve ) Fuel Lift Pump ) Seal,Fuel Pump ) C97998 ) C90 a) C96 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) For Additional CUMMINS Products Refer to Page C8 a) C96 b) C9097 c) C90996 d) C808 e) C8008 ( C9809 Liner + C90777 Seal ) 7 ) Bushing, Piston ) Bushing, Camshaft ) Camshaft ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () ) Exhaust, Valve ) Insert, Valve ) C806 C99 Valve X ) C8008 C9 Valve X C9077 Collet X ) C98 Use 6 C9077 Collet X ) C98 Use 6 6 Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C987 ) C987 ) C908 ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 806 (Thin Wall) Flange ø.". ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). ( ) Block 9906 (Thick Wall / Short Liner) Flange ø.", (Length: 9. / mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number C

122 Engine Model CPL 6CT 8. TURBOCHARGED Piston Std (m): 6, 99, 967, 96 CUMMINS CPL s 9 99 ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x C Engine Overhaul & Engine In Frame COK99 Thin Wall COK0 Thick Wall To order an In-Frame change OK to IK in above part number 7 ) Front Seal ) Rear Seal ) Crankshaft ) Front Wear Sleeve ) Rear Wear Sleeve 6) Front Rectangular Seal 7) Rear Rectangular Seal ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) 6 ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gasket 6) Front Gear Gasket 7) Front Cover Gasket 8) Rear Cover Gasket C8099 a) C96 b) C9097 c) C90996 d) C808 e) C8070 ( C90779 Liner + C90777 Seal ) ) Top Gasket ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) Intake, Valve ) Insert, Valve ) Fuel Lift Pump ) Seal,Fuel Pump ) C97998 ) C90 Cylinder Thin Wall Block () For Additional CUMMINS Products Refer to Page C8 Cylinder Thick Wall Block ( ) C800 a) C96 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) 7 ) Bushing, Piston ) Bushing, Camshaft ) Camshaft ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () ) Exhaust, Valve ) Insert, Valve ) C806 ) C8008 C99 Valve X C9 Valve X C9077 Collet X C9077 Collet X ) C98 ) C98 Use 6 Use 6 6 Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C987 ) C987 ) C908 ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 806 (Thin Wall) Flange ø.". ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number

123 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6CT 8. TURBOCHARGED Piston Std (m): 7707 CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x Engine Overhaul & Engine In Frame COK88 Thin Wall COK06 Thick Wall Long COK06S Thick Wall Short To order an In-Frame change OK to IK in above part number 6 7 ) Front Seal ) Top Gasket ) Rear Seal ) Bottom Gasket ) Crankshaft ) Head Gasket ) Front Wear Sleeve ) Oil Pan Gasket ) Rear Wear Sleeve ) Valve Cover Gasket 6) Front Rectangular Seal 6) Front Gear Gasket 7) Rear Rectangular Seal 7) Front Cover Gasket 8) Rear Cover Gasket ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) Cylinder Cylinder Thin Wall ( ) Thick Wall ( ) Long Liner C8088 C8006 a) C97707 b) C9097 c) C90996 d) C808 e) C8070 ( C90779 Liner + C90777 Seal ) ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) Intake, Valve ) Insert, Valve For Additional CUMMINS Products Refer to Page C8 Cylinder Thick Wall ( ) Short Liner C8006S 7 ) Exhaust, Valve ) Insert, Valve ) C806 ) C8008 C99 Valve X C9 Valve X C9077 Collet X C9077 Collet X ) C98 ) C98 Use 6 Use 6 ) Fuel Lift Pump ) Seal,Fuel Pump ) C97998 ) C90 a) C97707 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) a) C97707 b) C9097 c) C90996 d) C808 e) C8008 ( C9809 Liner + C90777 Seal ) ) Bushing, Piston ) Bushing, Camshaft ) Camshaft ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () 6 Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C987 ) C987 ) C908 ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 806 (Thin Wall) Flange ø.". ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). ( ) Block 9906 (Thick Wall / Short Liner) Flange ø.", (Length: 9. / mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number C

124 Engine Model CPL 6CT 8. TURBOCHARGED Piston Std (m): 966 CUMMINS CPL s 99 * * 7 * * Marine Engine ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x C Engine Overhaul & Engine In Frame COK7 Thin Wall COK0 Thick Wall Long COK80 Thick Wall Short To order an In-Frame change OK to IK in above part number 7 ) Front Seal ) Rear Seal ) Crankshaft ) Front Wear Sleeve ) Rear Wear Sleeve 6) Front Rectangular Seal 7) Rear Rectangular Seal ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) 6 Cylinder Cylinder Cylinder Thin Wall ( ) Thick Wall ( ) Thick Wall ( ) Long Liner Short Liner C807 C800 C980 a) C9966 b) C9097 c) C90996 d) C808 e) C8070 ( C90779 Liner + C90777 Seal ) ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gasket 6) Front Gear Gasket 7) Front Cover Gasket 8) Rear Cover Gasket ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) C806 C99 Valve X C9077 Collet X ) C98 Use 6 ) Fuel Lift Pump ) Seal,Fuel Pump ) C97998 ) C90 ) Intake, Valve ) Insert, Valve a) C9966 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) For Additional CUMMINS Products Refer to Page C8 a) C9966 b) C9097 c) C90996 d) C808 e) C8008 ( C9809 Liner + C90777 Seal ) 7 ) Bushing, Piston ) Bushing, Camshaft ) Camshaft ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () ) Exhaust, Valve ) Insert, Valve ) C8008 C9 Valve X C9077 Collet X ) C98 Use 6 6 Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C987 ) C987 ) C908 ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 806 (Thin Wall) Flange ø.". ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). ( ) Block 9906 (Thick Wall / Short Liner) Flange ø.", (Length: 9. / mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number

125 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Engine Model CPL 6CTA 8. TURBOCHARGED AFTERCOOLED EMISSION Piston Std (m): 96 CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x Engine Overhaul & Engine In Frame COK96L Thick Wall Long COK96S Thick Wall Short To order an In-Frame change OK to IK in above part number 7 ) Front Seal ) Rear Seal ) Crankshaft ) Front Wear Sleeve ) Rear Wear Sleeve 6) Front Rectangular Seal 7) Rear Rectangular Seal ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) 6 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gasket 6) Front Gear Gasket 7) Front Cover Gasket 8) Rear Cover Gasket ) Fuel Lift Pump ) Seal,Fuel Pump ) C97998 ) C90 Cylinder Thick Wall () Long Liner CPLK96L a) C996 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) Intake, Valve ) Insert, Valve ) C806 C99 Valve X C9077 Collet X ) C98 Use 6 Cylinder Thick Wall ( ) Short Liner CPLK96S a) C996 b) C9097 c) C90996 d) C808 e) C8008 ( C9809 Liner + C90777 Seal ) 7 ) Bushing, Piston ) Bushing, Camshaft ) Camshaft (Keyed) ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () ) Exhaust, Valve ) Insert, Valve ) C8008 C9 Valve X C9077 Collet X ) C98 Use 6 6 Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C987 ) C987 ) C908 ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). ( ) Block 9906 (Thick Wall / Short Liner) Flange ø.", (Length: 9. / mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number For Additional CUMMINS Products Refer to Page C8 C

126 Engine Model CPL 6CTA 8. TURBOCHARGED AFTERCOOLED Piston Std (m): 97 CUMMINS CPL s ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x C6 Engine Overhaul & Engine In Frame COK97 Thin Wall COK97L Thick Wall Long COK97S Thick Wall Short To order an In-Frame change OK to IK in above part number 7 ) Front Seal ) Rear Seal ) Crankshaft ) Front Wear Sleeve ) Rear Wear Sleeve 6) Front Rectangular Seal 7) Rear Rectangular Seal ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) 6 Cylinder Cylinder Cylinder Thin Wall ( ) Thick Wall ( ) Thick Wall ( ) Long Liner Short Liner CPLK97 CPLK97L CPLK97S a) C997 b) C9097 c) C90996 d) C808 e) C8070 ( C90779 Liner + C90777 Seal ) ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gasket 6) Front Gear Gasket 7) Front Cover Gasket 8) Rear Cover Gasket ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) C806 C99 Valve X C9077 Collet X ) C98 Use 6 ) Fuel Lift Pump ) Seal,Fuel Pump ) C97998 ) C90 ) Intake, Valve ) Insert, Valve a) C997 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) For Additional CUMMINS Products Refer to Page C8 a) C997 b) C9097 c) C90996 d) C808 e) C8008 ( C9809 Liner + C90777 Seal ) 7 ) Bushing, Piston ) Bushing, Camshaft ) Camshaft ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () C9 Valve X C9077 Collet X ) C98 Use 6 ) Exhaust, Valve ) Insert, Valve ) C Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C987 ) C987 ) C908 ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 806 (Thin Wall) Flange ø.". ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). ( ) Block 9906 (Thick Wall / Short Liner) Flange ø.", (Length: 9. / mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number

127 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) 6CTA 8. TURBOCHARGED AFTERCOOLED Piston Grade A (m): 878 CUMMINS CPL s Engine Model CPL ) Water Pump ) Water Pump Seal ) Thermostat ) C8008 ) C90089 ) C9869 x Engine Overhaul & Engine In Frame COK878L Thick Wall Long COK878S Thick Wall Short To order an In-Frame change OK to IK in above part number 7 ) Front Seal ) Rear Seal ) Crankshaft ) Front Wear Sleeve ) Rear Wear Sleeve 6) Front Rectangular Seal 7) Rear Rectangular Seal ) C977 ) C978 ) C98986 ) C90877 ) C ) C907 7) C97 Oil Pump C908 (6) 6 ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan Gasket ) Valve Cover Gasket 6) Front Gear Gasket 7) Front Cover Gasket 8) Rear Cover Gasket ) Fuel Lift Pump ) Seal,Fuel Pump ) C97998 ) C90 Cylinder Thick Wall () Long Liner CPLK878L a) C9878 b) C9097 c) C90996 d) C808 e) C8007 ( C9997 Liner + C90777 Seal ) ) C07 ) C8008 ) C9867 ) C907 ) C909 6) C99 7) C ) C90 ) Intake, Valve ) Insert, Valve For Additional CUMMINS Products Refer to Page C8 Cylinder Thick Wall ( ) Short Liner CPLK878S a) C9878 b) C9097 c) C90996 d) C808 e) C8008 ( C9809 Liner + C90777 Seal ) 7 ) Bushing, Piston ) Bushing, Camshaft ) Camshaft (Keyed) ) Tappet ) Head Bolt Long 6) Head Bolt Short 7) Con Rod ) C9990 X6 ) C999 X7 ) C97 () ) C90 ) C9778 X () 6) C9779 X () 7) C908 () ) Exhaust, Valve ) Insert, Valve ) C806 ) C8008 C99 Valve X C9 Valve X C9077 Collet X C9077 Collet X ) C98 ) C98 Use 6 Use 6 6 Main Bearing C800 C80 0. mm C mm C mm Use C900 C90 0. mm C mm C mm Use () ) Oil Cooler Plate ) Oil Cooler Gasket ) Oil Cooler Gasket Filter Head ) C987 ) C987 ) C908 ) Spring, Valve ) Seal, Valve ) Guide, Valve ) Retainer, Valve Spring ) C906 X ) C9707 X ) C96 X ) C9976 X ( ) Block 806 (Thin Wall) Flange ø.". ( ) Block 8008 (Thick Wall / Long Liner) Flange ø.", (Length: 9. / 7 mm). ( ) Block 9906 (Thick Wall / Short Liner) Flange ø.", (Length: 9. / mm). () Order in multiples of two. () To use C97 to replace 9788 buy the following from Cummins: Cam Gear, 97 Thrust and 90 Key. Use ESN or application model to confirm correct camshaft. () Only use on engines built from year 99 onwards. () Do not use with Crankshaft part number C7

128 Miscellaneous Parts Available from Maxiforce Part Number Description Engines C Plug, Expansion B/6B C90096 Plug, Expansion B/6B C90097 Seal, Valve Stem, Black B/6B C9077 Gear, Ring Flywheel B/6B C907 Flywheel Gear (8 Teeth) B/C C90 Dowel, Plug B/6B C90606 Plug, Expansion B/6B C9009 Flywheel Gear (7 Teeth) B/C C9078 Washer, Flat B/6B C9079 Cover, Gear B/6B C90797 Block Bare, Cyl 6B C9090 Block Bare, Cyl B C90 Gasket, Exhaust Manifold 6B C907 Flywheel Gear (7 Teeth) B/C C98 Belt 9.0L B/C C96 Belt 60.L B/C C968 Belt 67.0L B C98 Belt 70.0L B/C C987 Belt.L B/C C988 Belt 6.0L B/C C9086 Belt, Tensioner B/C C960 Damper 6C C9078 Rocker Lever Bolt B C8 TEL , FAX 0.9.0

129 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CUMMINS (MID-RANGE) Torque Information for Cummins B & C ENGINE MODEL CRANKSHAFT MAIN BEARING CAP BOLTS CONROD BOLTS CYLINDER HEAD BOLTS B Series & 6 Cyl. (Pre - 99) step - Lb.-ft. step - 66 Lb.-ft. step - Turn an additional 90. step - Lb.-ft. step - Lb.-ft. step - Turn an additional 60. step - 9 Lb.-ft. step - 6 Lb.-ft. step - 9 Lb.-ft. B Series & 6 Cyl. (99 and After) step - Lb.-ft. step - 66 Lb.-ft. step - Turn an additional 90. step - Lb.-ft. step - Lb.-ft. step - Turn an additional 60. See Cummins Service Manual C Series (Pre - 99) step - 7 Lb.-ft. step - 70 Lb.-ft. step - Turn an additional 60. step - 0 Lb.-ft. step - 60 Lb.-ft. step - 88 Lb.-ft. step - 7 Lb.-ft. step - 0 Lb.-ft. step - 6 Lb.-ft. C Series (99 and After) step - 7 Lb.-ft. step - 70 Lb.-ft. step - Turn an additional 60. step - 0 Lb.-ft. step - 60 Lb.-ft. step - 88 Lb.-ft. See Cummins Service Manual ISB Series & 6 Cyl. step - 7 Lb.-ft. step - 9 Lb.-ft. step - Turn an additional 90. step - Lb.-ft. step - Lb.-ft. step - Turn an additional 60. See Cummins Service Manual Cummins is the registered trademark of Cummins Inc. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IC07

130

131 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Introduction to Perkins Section Engine models covered by this User's Guide BORE DIAMETER mm / In 79.7 / / / / / / / /.978 NUMBER OF CYLINDERS / ENGINE MODEL / E60TA / /. 0. / / /.000 0C /.000 0C..0 Maxiforce Engine Composition for Perkins Applications POK: Engine Overhaul s Include: Cylinder kits, main and con rod bearing sets, thrust washer sets, front and rear seals, top and bottom gasket sets, conrod bushings, bolts and nuts, cam bushing and valve train kit. PBK: Basic Engine s Include: All components in the overhaul kit with the exception of the valve train kit. PVTK: Valve Train s Include: All valves, springs, guides, keepers and stem seals. Crankshaft s Include: The crankshaft, main and con rod bearings and thrust washer sets. NB: Should engine kits be required without engine bearings and thrust washers, please specify by adding the NB suffix on kit part number. i.e: POK NB. Perkins is the registered trademark of Perkins Engines Ltd. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IP0

132 In many cases it is necessary to identify the Perkins Engine Number in order to ascertain the correct engine kit for an application. All Perkins Engines should contain one of the two following formats for engine numbering (dependent on the year of manufacture): Pre 978 Engine Numbers: Engine Identification Guide This system, which consists of a maximum of digits, was used from 966 to late 978. Another numbering method was used prior to 966, which utilized a 7-digit number with no reference to engine series. Cubic Inch Capacity [. Engine] U A 0 D L Special Feature [Lip Seal] Country of Manufacture Code [UK] OEM [MF] Engine Serial Number Special Feature [Direct Injection] Current (post 978) Engine Numbers: Engine Family/Type Code (T6..) Build Number TU 00 U 6000 F Country of Manufacture Code Year of Manufacture Code Engine Serial Number Where to find your Engine Number Engine Type Position Engine Type Position Engine Type Position Engine Type Position. M.0 J or N.6 C or L 6. D.08 A./.8 C.8 F 000 / 00 (A/B/C) Series H or J Engine Family / Type Code AA AB AC T 00.0T AD 00.0TW AE 00.0 AG 00.0 AH 00.0 AJ 00.0 AK 00.0T AL 00.0TA AM 00.0T AP 00.0 DD 0C-T AQ 00.0T DE 0C-TA AR 00. DF 0B- AS 00. DG 0B-T AT 00.0TA DJ 0A- CD. DK 0A-T CE D. ED.08 CF G. HL 0C- CM CN.. T.. HM HP 0C-7 0C- DC 0C- HR 0C-T JD.0 JE D.0 JF G.0 JG.0. KR 0. LA. LD.6 LE G.6 LF.8 LG.8. LH C.6 LJ NC T.6.8 RE 0C- RF 0C-E RG 0C-T RH 0C-ET RJ 0C-TA RK 0C-ETA RR 0A- RS 0A-T RT 0A-TA TC 6. TE T6. TG 6.. TH T6.. TJ 6.. TK C6.. TT TC6.. TU T6.. TW 6.. VK 06C-E60TA YA YB T YC T YD 006E-6TW YE YF S YG YH T YJ TA YK TW A Air Cooled C Compensated D Direct Injection E Electronic G Gasoline T Turbocharged W Water Cooled Year of Manufacture Code E 978 J 98 N 986 U 990 Y 99 D 998 H 00 F G K L P S V W A B E F //99 - //99 //99 - //99 J K H 98 M 98 T 989 X 99 C 997 G 000 L 00 M 00 N 006 P 007 R /S 008 IP0 TEL , , FAX 0.9.0

133 Engine Application Chart CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES This chart refers to engine models and equipment using these engines. It has been divided into four sections: Engine models, material handling and industrial applications, agricultural and marine, in that order. The chart will offer the reader the desired model and will indicate the page number where engine components are shown in detail. MODEL COMMENTS PAGE. AG. & INDUSTRIAL ESN > 98 P0. AG. & INDUSTRIAL ESN 98 > P0 D. AG. & INDUSTRIAL ESN > UA90D P0 D. AG. & INDUSTRIAL ESN UA90DL > P0 D. INDUSTRIAL P0 D. AG. & INDUSTRIAL ESN > UA90DS P06 D. AG. & INDUSTRIAL ESN UA90DSL > P07 D. AGRICULTURAL P08 G. AG. & INDUSTRIAL GASOLINE ENGINE P09.. INDUSTRIAL P0 T.. AGRICULTURAL P.08 INDUSTRIAL P.08 MARINE P.0 AG. & INDUSTRIAL ESN > 8009 P.0 AG. & INDUSTRIAL ESN 8009 > P.0 FORKLIFTS P6.0 INDUSTRIAL P7 D.0 AG. & INDUSTRIAL ESN > 990 P8 D.0 AG. & INDUSTRIAL ESN C08 P9 D.0 AG. & INDUSTRIAL ESN 9C08 > P0 D.0 INDUSTRIAL ESN > U8978L P D.0 INDUSTRIAL ESN U8979L > P.0. FORKLIFTS P G.0 INDUSTRIAL GASOLINE ENGINE P. AG & INDUSTRIAL ESN UA877L > P.6 AG. & INDUSTRIAL ESN > U066N P6.6 AG. & INDUSTRIAL ESN U066N > P7.6 INDUSTRIAL ESN > U066N P8.6 INDUSTRIAL ESN U066N > P9 G.6 FORKLIFTS ESN > U066N P0 G.6 FORKLIFTS ESN U066N > P C.6 JCB ESN > U066N P C.6 JCB ESN U066N > P T.6 AG. ESN U066N > / JCB ESN U0777M P T.6 INDUSTRIAL ESN > U066N P T.6 INDUSTRIAL ESN U066N > P6 MODEL COMMENTS PAGE.8 AGRICULTURAL ESN > UAL P7.8 AGRICULTURAL ESN UAL > P8.8 INDUSTRIAL P9.8. FORKLIFTS P0.8 AGRICULTURAL P 6. AGRICULTURAL & INDUSTRIAL P 6. AGRICULTURAL P T6. AGRICULTURAL P T/TC6.. AGRICULTURAL P 6.. AGRICULTURAL P6 6.. AGRICULTURAL P7 6.. AGRICULTURAL & INDUSTRIAL P8 6.. AGRICULTURAL & INDUSTRIAL P9 6.. AGRICULTURAL P0 6.. MARINE P T6.. AGRICULTURAL P T6.. AGRICULTURAL P T6.. MARINE P 0- KR BUILDS P 0C- HL BUILDS P6 0C-7 HM BUILDS P7 0C- HP BUILDS P8 0C-T HR BUILDS P AA BUILDS P AA BUILDS P6 00.0T AB/AH BUILDS ESN > U60800W (99) P6 00.0T AB/AH BUILDS ESN U6080W (99) > P6 00.0T YE, and some YD BUILDS P6 00.0/0T AJ, AK, AM, AP, AQ BUILDS P6 00. AR, AS BUILDS P AG. & INDUSTRIAL YA BUILDS P T ESN > 7976X YB, YD BUILDS P T ESN U7977X > YB, YD BUILDS P T YE, and some YD BUILDS P T (YG) (YH) (YJ) (YK) BUILDS P7 0 0C- (DC) 0B- (DF) 0A- (DJ) P7 WEB SITE: IP0

134 Engine Application Chart MODEL COMMENTS PAGE 0C- (DC) BUILDS P7 0T (DD) (DE) (DG) BUILDS P7 0T 0C-T (DD) P7 0A 0A- (DK) P76 0C/E INDUSTRIAL 0C-, 0C-E P77 0C/E 0C-, 0C-E P78 0C/E AGRICULTURAL 0C-, 0C-E P79 0C/E INDUSTRIAL 0C-, 0C-E P80 0C/E (RG) (RH) (RJ) (RK) (RS) BUILDS P8 0C/E 0C-TA (RG), 0C-ETA (RJ) P8 0C/E 0A-T (RS) P8 0C/E 0A-T (RS) P8 0C/E AGRICULTURAL 0C-T, 0C-ET P8 0C/E INDUSTRIAL 0C-T, 0C-ET P86 06T 06-E60TA VK BUILDS P87 IP0 Perkins is the registered trademark of Perkins Engines Ltd. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. TEL , , FAX 0.9.0

135 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Material Handling and Industrial Application Equipment Chart EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE ALLIS CHALMERS 0-0 Forklift.0 ESN U767L > JD8 P7 ACP0/0D.0 JD P7 JCP 0-0 Forklift.0. JG800 P D7 Tractor.8 LF7 P9 700 Forklift.0 ESN U70CL > JD08 P7 7B Loader.6 ESN > U066N LD68 P8 7B Loader.6 ESN U066N > LD68 P9 80 Loader.8 LF67 P9 BOBCAT Telehandler 0C/E RG798 P8/P86 CATERPILLAR lb Forklift.6 ESN U066N > LD P9 RT G.6 ESN > U066N LE700 P0 RT G.6 ESN U066N > LE700 P T0-0D.8. LG7009 P0 T80D.8. LG709 P0 T00-00 G.6 ESN > U066N LE708 P0 T00-00 G.6 ESN U066N > LE708 P V/T0C Forklift.0. JG7009 P V0-60C Forklift.0. JG7000 P V60C.8. LG70069/LG7009 P0 V80D G.6 ESN > U066N LE70089 P0 V80D G.6 ESN U066N > LE70089 P V80D.8. LG70067/LG70090 P0 V00-0 G.6 ESN > U066N LE7009 P0 V00-0 G.6 ESN U066N > LE7009 P CLARK EQUIPMENT CTD LG70097/LG7006 P0 CY JD9 P6 CY JD7 P6 C Shovel 6.. TW7006 P9 C JD8 P6 CY B.6 ESN > U066N LD86 P8 CY B.6 ESN U066N > LD86 P9 C00 (H) D.0. JG70099 P C00 (H) LG709 P0 C00Y LG700 P0 C D 6.. TW70 P8 C00-CY TC66 P C00Y JG7000 P C00Y JG70 P C00-Y60 G.6 ESN > U066N LE807/LE76 P0 C00-Y60 G.6 ESN U066N > LE807/LE76 P TW70007 P8 Tow Tractor.6 ESN > U066N LD P8 Tow Tractor.6 ESN U066N > LD P9 EATON CORP Forklift G.0 JF668 P Forklift G.6 ESN > U066N LE8077 P0 Forklift G.6 ESN U066N > LE8077 P Perkins is the registered trademark of Perkins Engines Ltd. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IP0

136 EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE GEHL MFG 600 Skid Loader.08 ED7008 P Skid Steer Loader 0C/E RE79 P80 HYSTER C00 Compactor.6 ESN > U066N LD709 P8 C00 Compactor.6 ESN U066N > LD709 P9 Forklift 0C/E RE807 P80 H0F.0 JD007 P6 H0H.0 JD708 P6 H60-0E.8. LG707 P0 H60-80C.0. JG7000 P H60-80E.0. JG70 P H60-80E.8. LG7006 P0 H70-XL 00.0 AA708 P60 H0-0.6 ESN > U066N LD70 P8 H0-0.6 ESN U066N > LD70 P9 H TC00 P H H 6.. TW7000 P8 H6-80 Forklift YA707 P67 S ESN > U066N LD70 P8 S ESN U066N > LD70 P9 S60B-H60C.0 JD0680 P6 S80-SXL 00.0 AA706 P60 INGERSOLL RAND COMPRESSORS DRP 8S 8CFM D. ESN U79698DL > CE6 P0 Model 8 D. CE7 P0 JCB CX Backhoe.6 ESN > U066N LD0096 P6 CX Backhoe.6 ESN U066N > LD0096 P7 CX Backhoe C.6 ESN > U066N LH0 P CX Backhoe C.6 ESN U066N > LH0 P CX Backhoe 00.0 AA008 P60 CX Backhoe 00.0T ESN > U60800W (99) AB0609/AB079 P6 CX Backhoe 00.0T ESN U6080W > (99) AB0609/AB079 P6 CX Backhoe T.6 ESN U0777M > LJ07 P 00 Loader C.6 ESN > U066N LH00/LH06 P 00 Loader C.6 ESN U066N > LH00/LH06 P 0 Loader.6 ESN > U066N LD00 P6 0 Loader.6 ESN U066N > LD00 P7 0M Forklift T.6 ESN U0777M > LJ00 P Loader T.6 ESN U0777M > LJ0 P Loader 00.0T ESN > U60800W (99) AB0 P6 Loader 00.0T ESN U6080W > (99) AB0 P6 8 Wheel Loader T6.. TU007 P Front Loader T ESN > 7976X YB09 P68 Front Loader T ESN 7977X > YB09 P69 0 Handler.6 ESN > U066N LD00 P6 0 Handler.6 ESN U066N > LD00 P7 0S Loadall T.6 ESN U0777M > LJ08 P Backhoe Loader 00.0 AA0608 P60 Backhoe Loader 0C/E RE88 P77 Backhoe 00.0/0T AK068 P6 Industrial YA09 P67 Industrial 0C/E RE808 P78 IP06 Material Handling and Industrial Application Equipment Chart TEL , , FAX 0.9.0

137 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Material Handling and Industrial Application Equipment Chart EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE JCB (Continued) JCB Telehandler 0C/E RJ6 P8 Shovel Loader 00.0/0T AM060 P6 Sleevless Engine 00. AR0690 P66 Telehandler 0C/E RE P79 Telehandler 0C/E RG808 P8 Wheel Loader YA0 P67 LINCOLN ELECTRIC 00 Amp Welder.6 ESN > U066N LD08 P8 00 Amp Welder.6 ESN U066N > LD08 P9 Welder D. CE9 P0 MELROE E6 Loader.08 ED7007 P MASSEY FERGUSON INDUSTRIAL 0 D. ESN > UA90D P0 0 D. ESN UA90DL > P0 0 G. P09 0C D. ESN > UA90DS P06 0C D. ESN UA90DSL > P07 0 D.0 ESN 9C08 > P0 0B D. ESN > UA90DS P06 0B D. ESN UA90DSL > P07 Utility. ESN > 98 P0 Utility. ESN 98 > P0 0 D. ESN > UA90D P0 0 D. ESN UA90DL > P0 0 G. P09 0B D.0 ESN 9C08 > P0 0 D.0 ESN 9C08 > P0 0C.6 ESN > U066N LD8 P6 0C.6 ESN U066N > LD8 P7 0H.8 ESN UAL > P8 00 Crawler D. ESN > UA90D P0 0. ESN > 98 P0 0. ESN 98 > P0 0 D. ESN > UA90D P0 0. ESN > 98 P0 0. ESN 98 > P0 0 D. ESN > UA90D P0 0 D.0 ESN C08 P9 0 D.0 ESN 9C08 > P0 0 D.0 ESN C08 P9 6 D.0 ESN C08 P9 6 D.0 ESN 9C08 > P0 6 Tractor Shovel.0 ESN > 8009 P 6 Tractor Shovel.0 ESN 8009 > P 6 Tractor Shovel D.0 ESN > 990 P8 D. ESN > UA90D P0 00 Forklift & Treever D. ESN > UA90D P0 Crawler D. ESN > UA90D P0 00 Forklift D. ESN > UA90D P0 00 Forklift G. P09 WEB SITE: IP07

138 EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE MASSEY FERGUSON INDUSTRIAL (Continued) 6 Tractor Shovel D.0 ESN C08 P9 6 Tractor Shovel D.0 ESN 9C08 > P Forklift.6 ESN > U066N LD0 P6 MICHIGAN B Shovel 6. TC60 P OWATTONA MFG Skid Loader.08 ED700 P PERKINS USA General Industrial D.0 ESN > U8978L JE7 P General Industrial D.0 ESN U8979L > JE7 P General Industrial T.6 ESN > U066N LJ708 P General Industrial T.6 ESN U066N > LJ708 P6 General Industrial 6.. TW P8 General Genset.. CM08 P0 Genset T.6 ESN > U066N LJ700/LJ70 P Genset T.6 ESN U066N > LJ700/LJ70 P6 Genset 00.0 AA70 P6 Genset 0A DK80 P76 Genset 0C/E RE P77 Power Units T ESN > 7976X YB07/YB060 P68 Power Units T ESN 7977X > YB07 P69 RG WILSON Generator.. CM P0 SULLAIR CORP 8-0 Compressor.6 ESN > U066N LD707 P8 8-0 Compressor.6 ESN U066N > LD707 P9 Compressor D.0 ESN > U8978L JE700 P Compressor D.0 ESN U8979L > JE700 P Genset T.6 ESN > U066N LJ70 P Genset T.6 ESN U066N > LJ70 P6 TOWMOTOR V00/0/0.6 ESN > U066N LD0/ P8 V00/0/0.6 ESN U066N > LD0/ P9 VERMEER MFG M- Trencher.08 ED700 P EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE JACOBSEN MFG CO H- F0 Turf Tractor G.6 ESN > U066N LE700 P0 H- F0 Turf Tractor G.6 ESN U066N > LE700 P LANDINI TRACTORS 00 D. ESN UA90DL > P0 80 D. ESN UA90DL > P0 00 D. ESN UA90DSL > P07 0 D. ESN UA90DSL > P07 0F D. ESN UA90DSL > P07 80 D. ESN UA90DSL > P07 80 D. ESN UA90DSL > P07 600/60.6 ESN > U066N LD7 P6 IP08 Material Handling and Industrial Application Equipment Chart Agricultural Application Equipment Chart TEL , , FAX 0.9.0

139 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Agricultural Application Equipment Chart EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE LANDINI TRACTORS (Continued) 600/60.6 ESN U066N > LD7 P7 680/780.6 ESN > U066N P6 680/780.6 ESN U066N > P7 700/70.6 ESN > U066N LD7 P6 700/70.6 ESN U066N > LD7 P7 R800.8 ESN UAL > LF7 P8 MASSEY FERGUSON AGRICULTURAL. ESN > 98 P0. ESN 98 > P0 0. ESN > 98 P0 0. ESN 98 > P0 6.0 ESN > 8009 P 6.0 ESN 8009 > P 6 D.0 ESN > 990 P8 6 D.0 ESN C08 P9 6 D.0 ESN 9C08 > P0 RX9 T6.. TU00 P D. ESN > UA90D P0 D. ESN UA90DL > P0 G. P09 0 D. ESN > UA90D P0 0 G. P09 6 D.0 ESN C08 P9 6 D.0 ESN 9C08 > P0 7.6 ESN > U066N LD00 P6 7.6 ESN U066N > LD00 P7 9.8 ESN UAL > LF76 P8 0 D. ESN > UA90D P0 0 D. ESN UA90DL > P0 D. ESN > UA90D P0 D. ESN UA90DL > P0 D. ESN > UA90DS CE09 P06 D. ESN UA90DSL > CE09/0/ P07 D. ESN > UA90DS P06 D. ESN UA90DSL > P07 0 D. ESN UA90DSL > CE089 P07 0 D. CE88 P08 T.. CN9 P D.0 ESN C08 P9 D.0 ESN 9C08 > P0.6 ESN > U066N LD69/ P6.6 ESN U066N > LD69/ P7 6 T.. CN P 7.6 ESN > U066N LD0/ P6 7.6 ESN U066N > LD0/ P7 7 Tractor.8 ESN > UAL P7 7.8 ESN UAL > LF/ P8 8.8 ESN UAL > LF7 P8 8.8 NC089 P 90.8 ESN UAL > LF790 P8 00 Combine D.0 ESN C08 P9 WEB SITE: IP09

140 Agricultural Application Equipment Chart EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE MASSEY FERGUSON AGRICULTURAL (Continued) 00 Combine D.0 ESN 9C08 > P0 T.. CN87 P 6.6 ESN U066N > LD P YA7 P YA0 P DC807 P7 0 0T DD8078 P7 0 0T DD8 P7 0 DC8077 P7 6 0T DD8078 P7 7 0C/E RE787 P79 8 0C/E RE780 P79 9 0C/E RE788 P8 9 0C/E RE789 P8 0 Combine.8 NC699 P TX0 Combine 6.. TW0 P8 60 T6.. TU07/TU6 P 90.8 ESN UAL > LF86 P8 660 T6.. TU076 P 698 T.6 ESN U066N > LJ P TW P0 70 T/TC6.. P TX70 T6.. TU006 P 760 T/TC6.. ESN UA8970L > TH79 P 80 T6.. TU006 P TW087 P NC7 P ESN > UA06 P ESN UA06 > P 0 T/TC6.. TT7 P 0 T6. ESN > UAT P 0 T/TC6.. ESN UA6T > P T/TC6.. TH P TW008 P0 680 T6.. TU0 P 68 T6.. TU06 P 06 T.6 ESN U066N > LJ7 P TW9 P0 70 T.6 ESN U066N > LJ P 0 T6.. TU P T ESN > 7976X YB P T ESN 7977X > YB P69 C 0C/E RE87 P79 S 0T DD799 P7 F 0T DD799 P7 GE 0T DD799 P7 GEV 0T DD799 P7 GE 0C/E RE7990 P79 GEV 0C/E RE7990 P79 S 0C/E RE7990 P79 F 0C/E RE7990 P79 IP0 TEL , , FAX 0.9.0

141 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Agricultural Application Equipment Chart EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE MASSEY FERGUSON AGRICULTURAL (Continued) V 0C/E RE7990 P79 F 0C/E RG7989 P8 GE 0C/E RG7989 P8 GEV 0C/E RG7989 P8 SF 0C/E RG799 P8 SGE 0C/E RG799 P8 SGEV 0C/E RG799 P8 0C/E RE787 P79 0C/E RE797 P79 0C/E RE78 P79 0C/E RE799 P79 T 0C/E RG80 P8 T 0C/E RG80 P8 0C/E RG78 P8 0C/E RG79 P8 0C/E RG80 P8 0C/E RG8 P8 60 0C/E RG78 P8 60 0C/E RG00 P8 6 06T VK8 P T VK86 P T VK0 P T YH0 P T VK8 P T VK8 P T VK8 P87 6 0C/E RG78 P8 6 0C/E RG79 P8 6 0C/E RG80 P8 6 0C/E RG8 P T VK8 P T VK86 P T VK0 P T VK8 P T VK87 P T VK0 P T VK06 P T VK8 P T VK07 P T VK86 P T VK0 P T VK87 P T VK0 P T VK06 P T VK07 P87 Tractor 00.0/0T AK99 P6 Tractor 0C/E RE896 P78 Tractor 0C/E RE896 P8 WEB SITE: IP

142 Agricultural Application Equipment Chart EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE M ccormick MTX T YH098 P7 MTX T YH099 P7 MTX T YH090 P7 MTX T YH09 P7 MTX T YJ9 P7 Wheeled Tractors 06T VK7779 to VK7787 P87 NEW IDEA Combine T/TC6.. TH8 P NEW HOLLAND Stack Cruiser 6.. TW700 P9 SPERRY NEW HOLLAND L Skid Loader.08 ED70077 P L779 Skid Steer Loader.0. JG700/JG706 P WHITE FARM -0 T/TC6.. TH8 P -0 T/TC6.. TU7008 P -8 Tractor 6.. TG P6-8 Tractor 6.. TW70008 P Combine 6.. TJ89 P Combine 6.. TW70 P Combine 6.. TW7000 P Combine T6.. TU7000 P Marine Application Equipment Chart EQUIPMENT MODEL ENGINE ENGINE SERIAL NUMBER BUILD NUMBER PAGE MARINE Commercial/Pleasure Craft.08 ED7008 P Commercial/Pleasure Craft 6.. TW70087 P Perkins USA.08 ED9 P Pleasure Craft.08 ED0 P Pleasure Craft.08 ED00 P Pleasure Craft 6.. TW96/7 P Pleasure Craft T6.. TU0 P Pleasure Craft T6.. TU700 P Pleasure Craft T6.. TU7007 P PERKINS SABRE GM Electropak 00.0 AA0 P6 GM Electropak 00.0 AA06 P6.TGM 0C/E RG088 P86 TWGM 0C/E RJ0890 P8 IP TEL , , FAX 0.9.0

143 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application. INDIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm To ESN 98 ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner PCK a) P8 () b) P807 c) P808 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P806 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL 0 MF INDUSTRIAL Utility 0 0 ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ906 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT00 ) PULB00 ) P686 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ900 ) Bushing, Cam ) Camshaft ) Tappet ) Not Used ) P6 ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 ) P00 ) P66 Valve Train PVTK0 ) Valve, Intake ) Valve, Exhaust ) P6 X ) P09000 X ) Guide, Valve (Intake & Exhaust) ) P67 X6 ) Spring, Valve a) Inner b) Outer a) Not Used b) P X6 ) Lock, Valve ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P608 a) PUMW00 b) P78 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Flat Head Piston. () Cast sleeve replaces OEM Chrome Liner with Flange thickness 0.00". For Additional PERKINS Products Refer to Page P88 P0

144 Application. INDIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm From ESN 98 ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner Main Bearing Thrust Washer P7/ PUMK00 P6808 P806 P6808A.00 P806A.00 a) P8 () P6808B.00 P806B.00 b) P807 P6808C.00 P806C.00 c) P8 () Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL 0 MF INDUSTRIAL Utility 0 0 ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ906 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT00 ) PULB00 ) P686 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ900 ) Bushing, Cam ) Camshaft ) Tappet ) Not Used ) P6 ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 ) P00 ) P66 Valve Train PVTK0 ) Valve, Intake ) Valve, Exhaust ) P6 X ) P09000 X ) Guide, Valve (Intake & Exhaust) ) P67 X6 ) Spring, Valve a) Inner b) Outer a) Not Used b) P X6 ) Lock, Valve ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P608 a) PUMW00 b) P78 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Flat Head Piston. () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. P0 For Additional PERKINS Products Refer to Page P88

145 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application D. DIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm ESN ending with D & to UA90D ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner PUMK00 a) P68 b) P807 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P806 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL 0 0 MF INDUSTRIAL Crawler Forklift & Treever Crawler 00 Forklift ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ906 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB00 ) P68E006 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 ) Bushing, Cam ) Camshaft ) Tappet ) P8 X ) P6 ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 ) P00 ) P66 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P8 X ) P9 X ) P67 X6 a) Not Used b) P X6 ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P608 () P6A06 () a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () To Engine No: UA87D. () From Engine No: UA87D. () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. For Additional PERKINS Products Refer to Page P88 P0

146 Application D. DIRECT INJECTION Cyl, Lip Seal Bore:.600 in 9.9 mm ESN Ending with DL from UA90DL ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner PUMK00 a) P68 b) P807 c) P8 () Per Engine Main Bearing P6808 () P6808A.00 P6808B.00 P6808C.00 of Pairs P806 P806A.00 P806B.00 P806C.00 of Pairs Thrust Washer P7/ of Pairs LANDINI TRACTORS MF AGRICULTURAL 0 MF INDUSTRIAL 0 0 ) Front Seal ) Rear Seal ) Crankshaft ) P ) P8F7 ) PZZ90078 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB00 ) P68E006 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 ) Bushing, Cam ) Camshaft ) Tappet ) P8 X ) P6 ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 ) P00 ) P66 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P68 X ) P0 X ) P67 X6 a) Not Used b) P X6 ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P6A06 () P6808 () a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () To Engine No: U688G ( Hole). () From Engine No: U689G ( Hole). () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. () Use Main Bearing, PUMB00, from ESN U987C. For engine kit with these bearings, order POK/PBK0NB and nominate the bearings. P0 For Additional PERKINS Products Refer to Page P88

147 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application D. DIRECT INJECTION Cyl, Lip Seal Bore:.600 in 9.9 mm ) Engine O/H ) Basic Engine ) POK09 ) PBK09 Piston-Liner PUMK00 a) P68 b) P807 c) P8 () Main Bearing P6808 () P6808A.00 P6808B.00 P6808C.00 P806 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs INGERSOLL RAND COMPRESSORS Model 8 (CE7) DRP 8S 8CFM (CE6) () LINCOLN ELECTRIC Welder (CE9) ) Front Seal ) Rear Seal ) Crankshaft ) P ) P8F7 ) PZZ90078 (7) ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB000 ) P68E006 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 () ) Bushing, Cam ) Camshaft ) Tappet ) P8 X ) P6 ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 (7) ) P00 ) P66 Valve Train PVTK0 ) Valve, Intake ) Valve, Exhaust ) P68 X ) P0 X ) Guide, Valve (Intake & Exhaust) ) P67 X6 ) Spring, Valve a) Inner b) Outer a) Not Used b) P X6 ) Lock, Valve ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P608 () P6808 (6) a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P6660 (Screw Fitting) () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. () Build CE9 Uses PZZ900. () From ESN U79698DL. () To Engine No: U688G ( Hole). () Use Main Bearing, PUMB00, from ESN U987C. For engine kit with these (6) From Engine No: U689G ( Hole). bearings, order POK/PBK09NB and nominate the bearings. (7) Not used on Build No: CE9. For Additional PERKINS Products Refer to Page P88 P0

148 Application D. DIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm To ESN UA90DS ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner PUMK07 a) P89 b) P806 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P806 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL (CE09) MF INDUSTRIAL 0C 0B ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ906 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB00 ) P68E006 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 ) Bushing, Cam ) Camshaft ) Tappet ) P8 X ) P6 ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 ) P00 ) P66 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P68 X ) P0 X ) P67 X6 a) Not Used b) P X6 ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P6A06 () P6808 () a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () To Engine No: U688G ( Hole). () From Engine No: U689G ( Hole). () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. P06 For Additional PERKINS Products Refer to Page P88

149 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application D. DIRECT INJECTION Cyl, Lip Seal Bore:.600 in 9.9 mm From ESN UA90DSL LANDINI TRACTORS F MF AGRICULTURAL (CE09/0/) 0 (CE089) MF INDUSTRIAL 0C 0B ) Engine O/H ) Basic Engine ) POK06 ) PBK06 ) Front Seal ) Rear Seal ) Crankshaft ) P ) P8F7 ) PZZ90078 Piston-Liner PUMK07 a) P89 b) P806 c) P8 () ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB00 ) P68E006 Main Bearing P6808 () P6808A.00 P6808B.00 P6808C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 P806 P806A.00 P806B.00 P806C.00 ) P8 X ) P6 ) P08600 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs ) Bushing, Cam ) Camshaft ) Tappet ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 ) P00 ) P66 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P68 X ) P0 X ) P67 X6 a) Not Used b) P X6 ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P6A06 () P6808 () a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () To Engine No: U688G ( Hole). () From Engine No: U689G ( Hole). () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. () Use Main Bearing, PUMB00, from ESN U987C. For engine kit with these bearings, order POK/PBK06NB and nominate the bearings. For Additional PERKINS Products Refer to Page P88 P07

150 Application D. DIRECT INJECTION Cyl, Lip Seal Bore:.600 in 9.9 mm ) Engine O/H ) Basic Engine ) POK07/ () POK07/ () ) PBK07 Piston-Liner PUMK00 a) P68 b) P807 c) P8 () Main Bearing P6808 (6) P6808A.00 P6808B.00 P6808C.00 P806 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL 0 (CE88) ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P ) P8F7 ) PZZ90078 ) PULT008 ) PULB00 ) P68E006 ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 ) P8 X ) P6 ) P08600 ) P00 ) P00 ) P66 Valve Train 0 a) Angle 0 b) Angle a) PVTK0 b) PVTK0 ) Valve, Intake ) Valve, Exhaust 0 0 a) Angle b) Angle a) P8 X b) P68 X a) P9 X b) P0 X ) Guide, Valve (Intake & Exhaust) ) P67 X6 ) Spring, Valve a) Inner b) Outer a) Not Used b) P X6 ) Lock, Valve ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug ) P078 ) P0 ) P0006 P6A06 () P6808 () a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) PZZ8008 ) P66608 (Bayonet Fitting) () Use with Cylinder Head PZZ8008. () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. () Use with Cylinder Head 688. (6) Use Main Bearing, PUMB00, from ESN U987C. For engine kit with these () To Engine No: U688G ( Hole). bearings, order POK/PBK07NB and nominate the bearings. Only avilable in Std () From Engine No: U689G ( Hole). and 0.0 sizes. P08 For Additional PERKINS Products Refer to Page P88

151 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application G. GASOLINE ENGINE Cyl, Rope Seal Bore:.600 in 9.9 mm ) Engine O/H ) Basic Engine ) POK08 ) PBK08 Piston-Liner PCK a) P867 b) P80 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P806 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL 0 MF INDUSTRIAL Forklift ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ906 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT007 ) PULB00 ) P68E006 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ900 ) Bushing, Cam ) Camshaft ) Tappet ) Not Used ) P6 ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P00 ) P00 ) P66 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P7 X ) P7 X ) PE0 X6 a) Not Used b) P X6 ) P0000 X / ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear ) Water Pump a) Without Pulley b) With Pulley ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) P078 ) P0 ) P0006 a) PUMW00 b) P78 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. For Additional PERKINS Products Refer to Page P88 P09

152 Application.. Cyl, Lip Seal Bore:.600 in 9.9 mm PERKINS General Genset (CM08) ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner PCK a) PULP007 b) P8 c) P8 () Main Bearing P6808 () P6808A.00 P6808B.00 P6808C.00 P806 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs RG WILSON General (CM) ) Front Seal ) Rear Seal ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P ) P8F7 ) PULT008 ) PULB000 ) P68E006 ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 ) P8 ) P6 ) P08600 ) P00 ) P00 ) P66 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P98 X ) P0 X a) P677 X b) P67 X a) P X6 b) P X6 ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug ) P078 ) P0 ) P0006 P6808 a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) N/A ) P66608 (Bayonet Fitting) () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. () Use Main Bearing, PUMB00, from ESN U987C. For engine kit with these bearings, order POK/PBK0NB and nominate the bearings. P0 For Additional PERKINS Products Refer to Page P88

153 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application T.. Cyl, Lip Seal Bore:.600 in 9.9 mm MF AGRICULTURAL (CN9) 6 (CN) (CN87) ) Engine O/H ) Basic Engine ) POK ) PBK ) Front Seal ) Rear Seal ) P ) P8F7 Piston-Liner PCK a) PULP007 b) P8 c) P8 () ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT0080 ) PULB00 ) P68E006 Main Bearing P6808 () P6808A.00 P6808B.00 P6808C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X6 ) P7 X6 ) PZZ9000 P806 ) P8 ) P6 ) P08600 P806A.00 P806B.00 P806C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs ) Bushing, Cam ) Camshaft ) Tappet ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) N/A ) P00 ) P66 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK06 ) P7 X ) P7 X a) P677 X b) P67 X a) P X6 b) P X6 ) P0000 X ) Oil Pump ) Oil Pump Drive Gear ) Bushing, Drive Gear Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat / ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug ) P078 ) P0 ) P0006 P6808 a) PUMW00 b) P87 ) P8666 ) PZZ9007 ) P77A0 ) P77A09 ) N/A ) P66608 (Bayonet Fitting) () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. () Use Main Bearing, PUMB00, from ESN U987C. For engine kit with these bearings, order POK/PBKNB and nominate the bearings. For Additional PERKINS Products Refer to Page P88 P

154 Application.08 INDUSTRIAL Cyl, Rope Seal Bore:.0 in 79.7 mm ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner PUMK08 a) P699 b) P8008 () c) P87 Main Bearing P899 P899A.00 P899B.00 P899C.00 P807 P807A.00 P807B.00 P807C.00 Thrust Washer P090/8 Per Engine of Pairs of Pairs of Pieces GEHL MFG 600 Skid Loader (ED7008) MELROE E6 Loader (ED7007) OWATTONA MFG Skid Loader (ED700) SPERRY NEW HOLLAND L Skid Loader (ED70077) VERMEER MFG M- Trencher (ED700) ) Front Seal ) Rear Seal ) Crankshaft ) P8 ) P68807 X ) PZZ9060 ) Top Gasket ) Bottom Gasket ) Head Gasket ) P9 ) PULB00 ) P68 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) P X ) N/A ) Not Used ) Bushing, Cam ) Camshaft ) Tappet ) Not Used ) N/A ) P Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK00 ) P X ) P09006 X a) PE00 X b) P67 X a) P0780 X8 b) P0780 X8 ) P0000 X6 6) P870 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Rocker Shaft Bush P089 () P6A08 ) PUMW00 () ) P8666 ) N/A ) N/A ) N/A ) P000 () of Rings. () Check Against Build Number. P For Additional PERKINS Products Refer to Page P88

155 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.08 MARINE Cyl, Rope Seal Bore:.0 in 79.7 mm ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PUMK006 a) P688 b) P8087 () c) P87 Main Bearing P899 P899A.00 P899B.00 P899C.00 P807 P807A.00 P807B.00 P807C.00 Thrust Washer P090/8 Per Engine of Pairs of Pairs of Pieces MARINE Perkins USA (ED9) Pleasure Craft (ED0) Pleasure Craft (ED00) Commercial/Pleasure Craft (ED7008) ) Front Seal ) Rear Seal ) Crankshaft ) P8 ) P68807 X ) PZZ9060 ) Top Gasket ) Bottom Gasket ) Head Gasket ) P8786 ) PULB00 ) P68 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) P X ) N/A ) Not Used ) Bushing, Cam ) Camshaft ) Tappet ) Not Used ) N/A ) P Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK00 ) P X ) P X a) PE00 X b) P67 X a) P0780 X8 b) P0780 X8 ) P0000 X6 6) P870 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Rocker Shaft Bush ) Cylinder Head (Bare) ) Glowplug P089 () P6A08 ) PUMW00 () ) P8608 ) N/A ) N/A ) N/A ) P000 ) N/A ) P66608 (Bayonet Fitting) () of Rings. () Check Against Build Number. For Additional PERKINS Products Refer to Page P88 P

156 Application.0 INDIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm To ESN 8009 MF AGRICULTURAL 6 MF INDUSTRIAL 6 Tractor Shovel ) Engine O/H ) Basic Engine ) POK0 ) PBK0 ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ90 Piston-Liner PCK a) P8 () b) P807 c) P808 () ) Head Gasket ) P6906 ) PULB000 ) P68 Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ900 P80 P80A.00 P80B.00 P80C.00 ) P9 X ) P08600 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Bushing, Cam ) Tappet / ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P6 X ) P09000 X ) P67 X8 a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P6 P6A06 a) PUMW006 b) P89 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) PZZ80089 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Flat Head Piston. () Cast sleeve replaces OEM Chrome Liner with Flange thickness 0.00". P For Additional PERKINS Products Refer to Page P88

157 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.0 INDIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm From ESN 8009 ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PUMK00 a) P8 () b) P807 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs / MF AGRICULTURAL 6 MF INDUSTRIAL 6 Tractor Shovel ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ90 ) Top Gasket ) Bottom Gasket ) Head Gasket ) P6906 ) PULB000 ) P68 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ900 ) Bushing, Cam ) Camshaft ) P9 X ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P6 X ) P09000 X ) P67 X8 a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P6 P6A06 a) PUMW006 b) P89 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) PZZ80089 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Flat Head Piston. () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. For Additional PERKINS Products Refer to Page P88 P

158 Application.0 INDIRECT INJECTION Cyl, Rope & Lip Seal (Both Rear Seal Types Included in ) Bore:.600 in 9.9 mm HYSTER H0F H0H S60B-H60C (JD007) (JD708) (JD0680) ) Engine O/H ) Basic Engine ) POK8 ) PBK8 CLARK EQUIPMENT ) Front Seal C (JD8) ) Rear Seal CY0-0- (JD9) ) Crankshaft CY0-60 (JD7) ) P ) P68806 X P8F7 ) PZZ9009 () Piston-Liner PCK a) P8 () b) P807 c) P808 () ) Top Gasket ) Bottom Gasket ) Head Gasket ) P6906 ) PULB00 ) P68 Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ900 P80 P80A.00 P80B.00 P80C.00 ) P9 X ) P08600 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs ) Bushing, Cam ) Tappet / ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P6 X ) P09000 X ) P67 X8 a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P6 P66 ) PUMW0088 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) PZZ80089 ) P66608 (Bayonet Fitting) () Flat Head Piston. () Cast sleeve replaces OEM Chrome Liner with Flange thickness 0.00". () Lip Seal Crankshaft from ESN U70CL. P6 For Additional PERKINS Products Refer to Page P88

159 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.0 INDIRECT INJECTION Cyl, Lip Seal Bore:.600 in 9.9 mm ) Engine O/H ) Basic Engine ) POK9 ) PBK9 Piston-Liner PUMK00 a) P8 () b) P807 c) P8 (6) Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs ALLIS CHALMERS 0-0 Forklift (JD8) () 700 Forklift (JD08) () ACP0/0D (JD) ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Tappet / ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P ) P8F7 ) PZZ9009 ) P6906 ) PULB00 ) P68 ) P X ) P0090 X8 ) P7 X8 ) PZZ900 ) P9 X ) P08600 ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P6 X ) P09000 X ) P67 X8 a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P6 P6A06 () P66 () ) PUMW0088 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) PZZ80089 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Use on Build No: JD08. () From ESN U70CL () Use on Build No: JD8/JD. () From ESN U767L () Flat Head Piston. (6) Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. For Additional PERKINS Products Refer to Page P88 P7

160 Application D.0 DIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm To ESN 990 ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PCK a) P68 b) P807 c) P808 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs / MF AGRICULTURAL 6 MF INDUSTRIAL 6 Tractor Shovel ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ90 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT0069 ) P8908 ) P688 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ9000 ) Bushing, Cam ) Tappet ) P9 X ) P08600 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P8 X ) P9 X ) P67 X8 a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P6 P6A06 a) PUMW006 b) P89 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) PZZ80078 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Cast sleeve replaces OEM Chrome Liner with Flange thickness 0.00". P8 For Additional PERKINS Products Refer to Page P88

161 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application D.0 DIRECT INJECTION Cyl, Rope Seal Bore:.600 in 9.9 mm ESN C08 MF AGRICULTURAL Combine MF INDUSTRIAL Tractor Shovel ) Engine O/H ) Basic Engine ) POK ) PBK ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X ) PZZ90 Piston-Liner PUMK00 a) P68 b) P807 c) P8 () ) Head Gasket ) PULT0069 ) P8908 ) P688 Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ9000 P80 P80A.00 P80B.00 P80C.00 ) P9 X ) P08600 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Bushing, Cam ) Tappet / ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P8 X ) P9 X ) P67 X6 a) P X6 b) P X6 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P6 P6A06 a) PUMW006 b) P89 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) PZZ80078 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. For Additional PERKINS Products Refer to Page P88 P9

162 Application D.0 DIRECT INJECTION Cyl, Rope & Lip Seal (Both Rear Seal Types Included in ) Bore:.600 in 9.9 mm From ESN 9C08 MF AGRICULTURAL Combine MF INDUSTRIAL 0 0B Tractor Shovel ) Engine O/H ) Basic Engine ) POK ) PBK ) Front Seal ) Rear Seal ) Crankshaft ) P ) P68806 X P8F7 ) PZZ90 () PZZ90 () Piston-Liner PUMK00 a) P68 b) P807 c) P8 () ) Head Gasket ) PULT0069 ) P6806 ) P688 Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ9000 P80 P80A.00 P80B.00 P80C.00 ) P9 X ) P08600 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Bushing, Cam ) Tappet / ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P8 X ) P9 X ) P67 X8 a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump a) Without Pulley b) With Pulley ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P6 P6A06 a) PUMW006 b) P89 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) PZZ80078 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Rope Seal. () Lip Seal. () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. P0 For Additional PERKINS Products Refer to Page P88

163 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application D.0 DIRECT INJECTION Cyl, Lip Seal Bore:.600 in 9.9 mm To ESN U8978L ) Engine O/H ) Basic Engine ) POK6 ) PBK6 Piston-Liner PUMK00 a) P68 b) P807 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs / PERKINS USA General Industrial (JE7) ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Tappet ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper SULLAIR CORP Compressor (JE700) ) P ) P8F7 ) PZZ9009 ) PULT008 ) PULB00 ) P688 ) P X ) P0090 X8 ) P7 X8 ) PZZ9000 ) P9 X ) P08600 ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P68 X ) P99 X a) P677 X b) P67 X a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH P6 P6A0 ) PUMW0088 ) P8666 ) PZZ909 ) P77A0 ) P77A09 () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. For Additional PERKINS Products Refer to Page P88 P

164 Application D.0 DIRECT INJECTION Cyl, Lip Seal Bore:.600 in 9.9 mm From ESN U8979L ) Engine O/H ) Basic Engine ) POK7 ) PBK7 Piston-Liner PUMK07 a) P89 b) P806 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs PERKINS USA General Industrial (JE7) ) Front Seal ) Rear Seal SULLAIR CORP Compressor (JE700) ) Crankshaft ) P ) P8F7 ) PZZ9009 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB00 ) P688 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ9000 ) Bushing, Cam ) Tappet ) P9 X ) P08600 / ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK0 ) P68 X ) P99 X a) P677 X b) P67 X a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH P6 P6A0 ) PUMW0088 ) P8666 ) PZZ909 ) P77A0 ) P77A09 () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. P For Additional PERKINS Products Refer to Page P88

165 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.0. Cyl, Lip Seal Bore:.600 in 9.9 mm ALLIS CHALMERS JCP 0-0 Forklift (JG800) ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PUMK0 a) P6880 b) P8007 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs CATERPILLAR V0-60C Forklift (JG7000) V/T0C Forklift (JG7009) CLARK EQUIPMENT C00 (H) D C00Y-0-60 C00Y-0-60 HYSTER H60-80C H60-80E (JG70099) (JG7000) (JG70) (JG7000) (JG70) SPERRY NEW HOLLAND L779 Skid Steer Loader (JG700/JG706) ) Front Seal ) Rear Seal ) Crankshaft ) P ) P8F7 ) PZZ9009 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB00 ) P688 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P0090 X8 ) P7 X8 ) PZZ9000 ) Bushing, Cam ) Tappet ) P9 X ) P08600 / ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK8 ) P98 X ) P99 X a) P677 X b) P67 X a) P X8 b) P X8 ) P0000 X6 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P6 P6A0 ) PUMW0088 ) P8666 ) PZZ909 ) P77A0 ) P77A09 ) N/A ) P66608 (Bayonet Fitting) () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. For Additional PERKINS Products Refer to Page P88 P

166 Application G.0 Cyl Lip Seal Bore:.600 in 9.9 mm ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PCK a) P867 b) P80 c) P8 () Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/ Per Engine of Pairs of Pairs of Pairs EATON CORP Forklift (JF668) / ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Bushing, Cam ) Tappet ) Crankshaft Gear ) Camshaft Gear ) Idler Gear, Lower ) Idler Gear, Upper ) P ) P8F7 ) PZZ9009 ) PULT008 ) PULB00 ) P688 ) P X ) P0090 X8 ) P7 X8 ) P9 X ) P08600 ) P008 ) N/A ) P00 ) P00 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK ) P7 X ) P7 X ) PE0 X8 a) P X8 b) P X8 ) P0000 X6 6) N/A / Oil Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH P6 ) N/A ) P8666 ) PZZ909 ) P77A0 ) P77A09 () Semi Finished Liner, P8, and Finished Liner in.00", P88, are available. P For Additional PERKINS Products Refer to Page P88

167 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application. Cyl, Rope & Lip Seal (Both Rear Seal Types Inckuded in ) Bore:.8770 in mm To ESN UA877L ) Engine O/H ) Basic Engine ) POK0 ) PBK0 Piston-Liner PUMK0066 a) P867 b) P80 c) P89 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs LANDINI TRACTORS TL0C (LA9) MF AGRICULTURAL 6 (JG7000) MF INDUSTRIAL 0 (LA) 0B ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P68808 X P8F7 ) N/A ) Top Gasket ) Bottom Gasket ) Head Gasket ) Oil Pan ) PULT00 ) PULB00 ) P689 ) PUMK0600 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) P X ) P () P7 () ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 () ) P0 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK06 ) P6 X ) P88 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit P8 () P678 ) PA0 ) P869 ) PZZ900 ) P8 ) P8 ) PZZ807 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) P708 () () To ESN U066N. () From ESN U066N. () Used on Build No: LA9/LA. () Used on Build No: LA9. () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00"oversize, P898, are also available. For Additional PERKINS Products Refer to Page P88 P

168 Application.6 Cyl, Rope & Lip Seal Bore:.8770 in mm To ESN U066N JCB CX Backhoe (LD0096) 0 Loader (LD00) 0 Handler (LD00) LANDINI TRACTORS 600/60 (LD7) 680/ /70 (LD7) MF AGRICULTURAL 7 (LD00) (LD69/) 7 (LD0/) MF INDUSTRIAL 0C (LD8) 6000 Forklift (LD0) ) Engine O/H ) Basic Engine ) POK6 ) PBK6 ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 P68808 X ) PZZ9009 () PZZ9008 () Valve Train Piston-Liner PUMK0 a) P680 b) P80 c) P89 () ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT00 ) PULB00 ) P68A07 ) P689 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust Main Bearing P88 ) Guide, Valve a) Intake b) Exhaust P88A.00 P88B.00 P88C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 P80 ) P x ) P ) P6 ) P07 ) Spring, Valve a) Inner b) Outer P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 ) P0 ) Lock, Valve 6) Seal, Valve 6 PVTK06 ) P6 X ) P88 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit P8 () P68 (6) P678 (7) () For Non Agricultural Uses. () For Agricultural Uses. () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00"oversize, P898, are also available. P6 ) PA0 ) P869 P8666 (Use on JCB) ) PZZ900 ) P8 ) P8 ) PZZ807 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () Rope seal crank used To ESN 68L. () Lip seal crank used From ESN 69L. (6) To Engine No: 6UA7. (7) From Engine No: 6UA7. For Additional PERKINS Products Refer to Page P88 P708 ()

169 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.6 Cyl, Lip Seal Bore:.8770 in mm From ESN U066N ) Engine O/H ) Basic Engine ) POK9 ) PBK9 Piston-Liner PCK0 a) P680 b) P80 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs JCB CX Backhoe (LD0096) 0 Loader (LD00) 0 Handler (LD00) LANDINI TRACTORS 600/60 (LD7) 680/ /70 (LD7) MF AGRICULTURAL 7 (LD00) (LD69/) 7 (LD0/) 6 (LD) MF INDUSTRIAL 0C (LD8) ) Front Seal ) Rear Seal ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan ) P8F6 ) P8F7 ) PZZ9008 6) Timing Cover Gsk ) PULT006 ) PULB00 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) P x ) P7 ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 ) P0 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK06 ) P6 X ) P88 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit P8 () P678 ) PA0 ) P869 P8666 (Use on JCB) ) PZZ900 ) P8 ) P8 ) PZZ807 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) P708 () () For Non Agricultural Uses. () For Agricultural Uses. () Flanged, Semi Finished Liner available, PX0. For Additional PERKINS Products Refer to Page P88 P7

170 Application.6 Cyl, Rope & Lip Seal (Both Rear Seal Types Included in ) Bore:.8770 in mm To ESN U066N ALLIS CHALMERS 7B Loader (LD68) CLARK EQUIPMENT CY B Tow Tractor (LD86) (LD) HYSTER C00 Compactor (LD709) H0-0 (LD70) S60-00 (LD70) LINCOLN ELECTRIC 00 Amp Welder (LD08) SULLAIR CORP 8-0 Compressor (LD707) TOWMOTOR V00/0/0 (LD0/) 6 ) Engine O/H ) Basic Engine ) POK0 ) PBK0 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 P68808 X ) PZZ9009 () PZZ9008 () PZZ9008 () () Valve Train PVTK Piston-Liner PUMK0 a) P680 b) P80 c) P89 (6) 6) Timing Cover Gsk ) PULT00 ) PULB006 ) P68A07 ) P689 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust ) P X ) PA0 X Main Bearing P88 ) Guide, Valve a) Intake b) Exhaust P88A.00 P88B.00 P88C.00 a) PF00 X b) PJ00 X P80 ) P x ) P9 P () ) P6 ) P07 ) Spring, Valve a) Inner b) Outer P80A.00 P80B.00 P80C.00 a) P7 X8 b) P7 X8 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 () ) P0 () ) Lock, Valve 6) Seal, Valve ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit P8 P678 ) PA0 ) P8666 (7) ) PZZ900 ) P8 ) P8 ) PZZ807 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) P708 () () Check with Build List. () Used on Build No: LD68. () Rope Seal Crank Used To ESN U68L. (6) Parallel, Semi Finished Liner P8, Flanged, Semi Finished Liner P89, and () Lip Seal Crank Used From ESN U69L. Finished Liner in.00"oversize P898, are also available. () Used on Build No: LD86. (7) Use P8609 on Build LD86. P8 For Additional PERKINS Products Refer to Page P88

171 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.6 Cyl, Lip Seal Bore:.8770 in mm From ESN U066N ALLIS CHALMERS 7B Loader (LD68) CATERPILLAR lb Forklift (LD) CLARK EQUIPMENT CY B Tow Tractor (LD86) (LD) HYSTER C00 Compactor (LD709) H0-0 (LD70) S60-00 (LD70) LINCOLN ELECTRIC 00 Amp Welder (LD08) SULLAIR CORP 8-0 Compressor (LD707) TOWMOTOR V00/0/0 (LD0/) ) Engine O/H ) Basic Engine ) POK8 ) PBK8 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 PZZ9008 () Valve Train Piston-Liner PCK0 a) P680 b) P80 c) PX0 () ) PULT006 ) PULB006 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust Main Bearing P88 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Guide, Valve a) Intake b) Exhaust P88A.00 P88B.00 P88C.00 P80 ) Spring, Valve a) Inner b) Outer P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) P x ) P8 P7 () ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 P79 () ) P0 () ) Lock, Valve 6) Seal, Valve 6 PVTK ) P X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit P8 P678 ) PA0 ) P8666 P8609 () ) PZZ900 ) P8 ) P8 ) PZZ807 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) P708 () () Used on Build No: LD68. () Used on Build No: LD86. () Flanged, Semi Finished Liner available, PX0. () Use on Build LD86. For Additional PERKINS Products Refer to Page P88 P9

172 Application G.6 GASOLINE ENGINE Cyl, Lip Seal Bore:.8770 in mm To ESN U066N ) Engine O/H ) Basic Engine ) POK7 ) PBK7 Piston-Liner PCK9 a) PULP007 b) P8 c) P89 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs CATERPILLAR RT (LE700) T00-00 (LE708) V80D (LE70089) V00-0 (LE7009) CLARK EQUIPMENT C00-Y60 (LE807/LE76) EATON CORP Forklift (LE8077) JACOBSEN MFG CO H- & F0 Turf Tractor (LE700) 6 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train PVTK ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT076 ) PULB006 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 () ) Valve, Intake ) Valve, Exhaust ) P87 X ) P70 X ) Guide, Valve a) Intake b) Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) P X ) P76 X8 ) P8 X8 a) PF00 X b) PJ00 X ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) P x ) P9 ) P6 ) P07 ) Spring, Valve a) Inner b) Outer a) P7 X8 b) P7 X8 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 () ) P7 P79 () ) P79 ) Lock, Valve 6) Seal, Valve ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug Balancer Unit P8 P678 ) PA0 PUMW00 ) P8666 (6) ) PZZ900 ) P8 ) P8 ) N/A ) N/A P708 () () Do not Use on Build No: LE70089,LE76, and LE807. () Use on Build No: LE76,LE807. () Order with for Build No: LE70089,LE7009. () Use on Build Nos: LE70089/LE807/LE76. P0 () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00"oversize,p898, are also available. (6) Use P86 on Build LE708 and P8609 on Build LE807. For Additional PERKINS Products Refer to Page P88

173 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application G.6 GASOLINE ENGINE Cyl, Lip Seal Bore:.8770 in mm From ESN U066N ) Engine O/H ) Basic Engine ) POK7 ) PBK7 Piston-Liner PCK6G a) PULP007 b) P8 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs CATERPILLAR RT (LE700) T00-00 (LE708) V80D (LE70089) V00-0 (LE7009) CLARK EQUIPMENT C00-Y60 (LE807/LE76) EATON CORP Forklift (LE8077) JACOBSEN MFG CO H- & F0 Turf Tractor (LE700) ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT076 ) PULB006 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 () ) Valve, Intake ) Valve, Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) P X ) P76 X8 ) P8 X8 ) Guide, Valve a) Intake b) Exhaust ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) P x ) P8 ) P6 ) P07 ) Spring, Valve a) Inner b) Outer ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 () ) P7 P79 () ) P79 ) Lock, Valve 6) Seal, Valve 6 PVTK ) P87 X ) P70 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug Balancer Unit P8 P678 ) PA0 PUMW00 (6) ) P8666 (7) ) PZZ900 ) P8 ) P8 ) N/A ) N/A P708 () () Do not Use on Build No: LE70089/LE76/LE807. () Used on Build Nos: LE70089/LE807/LE76. () Use on Build No: LE76/LE807. (6) Check with Build List. () Order with for Build No: LE70089/LE7009. (7) Used P8 on Build LE708 and P8609 on Build LE807. () Flanged, Semi Finished Liner available, PX0. For Additional PERKINS Products Refer to Page P88 P

174 Application C.6 COMPENSATED Cyl, Lip Seal Bore:.8770 in mm To ESN U066N ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PCK a) PULP00 b) P87 c) P89 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs JCB CX Backhoe (LH0) 00 Loader (LH00) 00 Loader (LH06) 6 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train PVTK ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT076 ) PULB00 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust ) P X ) PA0 X ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Guide, Valve a) Intake b) Exhaust a) PF00 X b) PJ00 X ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P7 ) P6 ) P07 ) Spring, Valve a) Inner b) Outer a) P7 X8 b) P7 X8 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 P79 () ) P0 ) Lock, Valve 6) Seal, Valve ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P8 P678 ) PUMW008 ) P86 ) PZZ900 ) P8 ) P8 ) PZZ807 ) P66608 (Bayonet Fitting) () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00"oversize,p898, are also available. () Used on Build Nos: LH0/LH00. P For Additional PERKINS Products Refer to Page P88

175 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application C.6 COMPENSATED Cyl, Lip Seal Bore:.8770 in mm From ESN U066N ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PCK6 a) PULP00 b) P87 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs JCB CX Backhoe (LH0) 00 Loader (LH00) 00 Loader (LH06) 6 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train PVTK ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT006 ) PULB00 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust ) P X ) PA0 X ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Guide, Valve a) Intake b) Exhaust a) PF00 X b) PJ00 X ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P7 ) P6 ) P07 ) Spring, Valve a) Inner b) Outer a) P7 X8 b) P7 X8 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 P79 () ) P0 ) Lock, Valve 6) Seal, Valve ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P8 P678 ) PUMW008 ) P86 ) PZZ900 ) P8 ) P8 ) PZZ807 ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available,px0. () Used on Build Nos: LH0/LH00. For Additional PERKINS Products Refer to Page P88 P

176 Application T.6 TURBOCHARGED Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK ) PBK Piston-Liner PCK6T a) PULP00 b) P8 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs JCB (From ESN U0777M) CX Backhoe (LJ07) 0M Forklift (LJ00) Loader (LJ0) 0S Loadall (LJ08) MF AGRICULTURAL (From ESN U066N) 698 (LJ) 06 (LJ7) 70 (LJ) ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT006 ) PULB00 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ900 ) Guide, Valve a) Intake b) Exhaust ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) N/A ) P6 ) P07 ) Spring, Valve a) Inner b) Outer ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 P79 () ) N/A ) Lock, Valve 6) Seal, Valve 6 PVTK ) PH00 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Glowplug Balancer Unit PF0 PF0 () P678 ) PUMW008 ) P86 ) PZZ900 ) P8 ) P8 ) P66608 (Bayonet Fitting) PK0 () () For Use on Agricultural Applications. () Flanged, Semi Finished Liner available, PX0. () Used on Build No: LJ00. P For Additional PERKINS Products Refer to Page P88

177 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application T.6 TURBOCHARGED Cyl, Lip Seal Bore:.8770 in mm To ESN U066N ) Engine O/H ) Basic Engine ) POK8 ) PBK8 Piston-Liner PCK0 a) PULP00 b) P8 c) P89 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs PERKINS USA General Industrial (LJ708) Genset (LJ700/LJ70) SULLAIR CORP Genset (LJ70) ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT076 ) PULB006 ) P68A07 ) P689 ) PUMK0600 6) P68P0 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ900 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) N/A ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 P79 () ) N/A Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK ) PH00 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Glowplug Balancer Unit PF0 PF0 () P678 ) PUMW008 PUMW006 () ) P86 ) PZZ900 ) P8 ) P8 ) P66608 (Bayonet Fitting) PK0 () () Use on Build No: LJ708. () Use on Build No: LJ70. () Parallel, Semi Finished Liner, P8,Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. For Additional PERKINS Products Refer to Page P88 P

178 Application T.6 TURBOCHARGED Cyl, Lip Seal Bore:.8770 in mm From ESN U066N ) Engine O/H ) Basic Engine ) POK6 ) PBK6 Piston-Liner PCK6T a) PULP00 b) P8 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs PERKINS USA General Industrial Genset (LJ708) (LJ700/LJ70) SULLAIR CORP Genset (LJ70) ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT006 ) PULB006 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ900 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) N/A ) P6 ) P07 ) Spring, Valve a) Inner b) Outer ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 P79 () ) N/A ) Lock, Valve 6) Seal, Valve 6 PVTK ) PH00 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Glowplug Balancer Unit PF0 PF0 () P678 ) PUMW008 PUMW006 () ) P86 ) PZZ900 ) P8 ) P8 ) P66608 (Bayonet Fitting) PK0 () () Use on Build No: LJ708. () Use on Build No: LJ70. () Flanged, Semi Finished Liner available, PX0. P6 For Additional PERKINS Products Refer to Page P88

179 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.8 Cyl Both rear seal types in kit Bore:.978 in 0.0 mm To ESN UAL ) Engine O/H ) Basic Engine ) POK60 ) PBK60 Piston-Liner PUMK0067 a) P8907 b) P8A009 c) P8 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL 7 Tractor ) Front Seal ) Rear Seal ) P8F6 ) P68808 X () P8F7 () ) PZZ9009 () PZZ9008 () ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT00 ) PULB00 ) P68A07 ) P689 ) PUMK0600 6) P68P0 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 ) P0 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK06 ) P6 X ) P88 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit P678 ) PA0 ) P869 ) PZZ900 ) P8 ) P8 ) PZZ807 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) P708 () Parallel, Semi Finished Liner P8 (.06"OD), and Flanged, Semi Finished Liner P86 are also available. () Rope Seal. () Lip Seal. For Additional PERKINS Products Refer to Page P88 P7

180 Application.8 Cyl, Lip Seal Bore:.978 in 0.0 mm From ESN UAL ) Engine O/H ) Basic Engine ) POK6 ) PBK6 Piston-Liner PCK8 a) PULP0009 b) P80 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs LANDINI TRACTORS R800 (LF7) MF AGRICULTURAL 9 (LF76) 7 (LF/) 8 (LF7) 90 (LF790) 90 (LF86) MF INDUSTRIAL 0H ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT006 ) PULB00 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Guide, Valve a) Intake b) Exhaust ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P () P7 () ) P6 ) P07 ) Spring, Valve a) Inner b) Outer ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 ) P0 ) Lock, Valve 6) Seal, Valve 6 PVTK06 ) P6 X ) P88 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit PF0 (6) P678 ) PA0 ) P869 ) PZZ900 ) P8 ) P8 ) PZZ807 ) P66608 (Bayonet Fitting) P708 () PK0 () () To ESN U0896N. () Flanged, Semi Finished Liner available, PX0. () From ESN U0897N. (6) Used with Balancer Unit PK0. () To ESN U076N. () From ESN U076N. P8 For Additional PERKINS Products Refer to Page P88

181 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.8 Cyl, Rope & Lip Seal Bore:.978 in 0.0 mm ) Engine O/H ) Basic Engine ) POK6 ) PBK6 Piston-Liner PCK8 a) PULP0009 b) P80 c) PX0 (6) Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ALLIS CHALMERS 80 Loader (LF67) D7 Tractor (LF7) ) Front Seal ) Rear Seal ) P8F6 ) P8F7 P68808 X ) PZZ9009 () PZZ9008 () Valve Train ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) PULT006 ) PULB006 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P () () P7 () () ) P6 ) P07 ) Spring, Valve a) Inner b) Outer ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 ) P0 ) Lock, Valve 6) Seal, Valve 6 PVTK ) P X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P8 P678 ) PA0 ) P8666 ) PZZ900 ) P8 ) P8 ) PZZ807 ) Not Used () To ESN U0896N. () From ESN U787L. () From ESN U0897N. (6) Flanged, Semi Finished Liner available, PX0. () Check with Build List. () To ESN U786L. For Additional PERKINS Products Refer to Page P88 P9

182 Application.8. Cyl, Lip Seal Bore:.978 in 0.0 mm CATERPILLAR T80D T0-0D V60C V80D (LG709) (LG7009) (LG70069/LG7009) (LG70067/LG70090) CLARK EQUIPMENT C00 (H) (LG709) C00Y-00-0 (LG700) CTD0-0 (LG70097/LG7006) HYSTER H60-80E H60-0E (LG7006) (LG707) ) Engine O/H ) Basic Engine ) POK6 ) PBK6 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ9008 Valve Train Piston-Liner PCK8 a) P688 b) P80 c) PX0 (7) ) PULT076 ) PULB006 ) P68A07 ) P68E06 ) PUMK0600 6) P68P0 ) Valve, Intake ) Valve, Exhaust Main Bearing P88 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Guide, Valve a) Intake b) Exhaust P88A.00 P88B.00 P88C.00 P80 ) Spring, Valve a) Inner b) Outer P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan 6) Timing Cover Gsk ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P9 () P8 () ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7 P79 (6) ) P79 ) Lock, Valve 6) Seal, Valve 6 PVTK ) P X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug Balancer Unit P8 P F0 () P678 ) PA0 () PUMW00 () ) P8666 (8) ) PZZ900 ) P8 ) P8 ) PZZ807 ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) P708 () PK0 () () Check with Build List. () Use on Build No: LG709. () To ESN U0896N. (6) Use on Build Nos: LG70067/LG () From ESN U0897N. (7) Flanged, Semi Finished Liner available, PX0. () Use on Build No: LG700. (8) Build LG709 use P86, and Build LG709, LG700 use P8609. P0 For Additional PERKINS Products Refer to Page P88

183 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application.8 Cyl, Lip Seal Bore:.00 in. mm ) Engine O/H ) Basic Engine ) POK90 ) PBK90 Piston-Liner PCK8 a) P8676 b) P88 c) P8 Main Bearing P6808 P6808A.00 P6808B.00 P6808C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs MF AGRICULTURAL 8 (NC089) 0 Combine (NC699) 08 (NC7) ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) P6 ) P8F7 ) N/A ) P6908 ) P68 ) P688 ) P0008 X ) N/A ) Not Used ) N/A ) Not Used ) N/A ) N/A Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve a) Inner b) Outer ) Lock, Valve PVTK08 ) P X ) P67 X ) P X8 a) P7 X8 b) P7 X8 ) P708 X6 Oil Pump Lift Pump ) Water Pump ) Thermostat P P66 ) PUMW0009 () PUMW00 () ) P8666 () Used on Build No: NC089/NC699. () Used on Build No: NC7. For Additional PERKINS Products Refer to Page P88 P

184 Application 6. 6 Cyl, Rope & Lip Seal (Both Rear Seal Types Included in ) Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK60 ) PBK60 Piston-Liner PUMK07 a) P8670 b) P80 c) P89 () Main Bearing P800 P800A.00 P800B.00 P800C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer PW0L () P7/6 (Both Types in ) 6 Per Engine of 7 Pairs of 6 Pairs of Pairs CLARK EQUIPMENT C00-CY (TC66) HYSTER H0-0 (TC00) MF AGRICULTURAL 00 () MICHIGAN B Shovel (TC60) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P68808 X P8F7 ) PZZ90090 () Valve Train ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT00 ) PULB006 ) P688 ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) N/A ) P6 ) P07 ) P7 ) Spring, Valve a) Inner b) Outer 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F ) Lock, Valve 6) Seal, Valve 6 PVTK60 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P067 () P () P6A06 ) PUMW0 () ) P8609 ) PZZ9006 ) P8 ) P8 ) N/A ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () For ESN s Prior to 8089 use Thrust Washer PW0L. () To ESN UA06. () From ESN U7089L. () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished () Check with Build List. Liner, P89, and Finished Liner in.00" Oversize, P 898, are also available. P For Additional PERKINS Products Refer to Page P88

185 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 6. 6 Cyl, Rope Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK6 ) PBK6 Piston-Liner PUMK07 a) P8670 b) P80 c) P89 () Main Bearing P800 P800A.00 P800B.00 P800C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs MF AGRICULTURAL 00 () ) Front Seal ) Rear Seal ) P8F6 ) P68808 X Valve Train ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT006 ) PULB006 ) P687 ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) N/A ) P6 ) P07 ) P7 ) Spring, Valve a) Inner b) Outer 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F ) Lock, Valve 6) Seal, Valve 6 PVTK60 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P067 P6A06 ) PUMW006 ) P8666 P86 ) PZZ9006 ) P8 ) P8 ) N/A ) P6660 (Screw Fitting) P66608 (Bayonet Fitting) () From ESN UA06. () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. For Additional PERKINS Products Refer to Page P88 P

186 Application T6. TURBOCHARGED 6 Cyl, Rope Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK660 ) PBK660 Piston-Liner PCK a) P8676 b) P80 c) P89 () Main Bearing PUMB00 PUMB00A.00 PUMB00B.00 PUMB00C.00 PUME0007 PUME0007A.00 PUME0007B.00 PUME0007C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs MF AGRICULTURAL 0 () ) Front Seal ) Rear Seal ) P8F6 ) P68808 X ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT00 ) PULB006 ) P688 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) P X6 ) P76 X ) P8 X 6 ) Camshaft ) Tappet ) Push Rod ) N/A ) P6 ) P07 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) N/A ) P67 ) P77 ) P9 ) P7 6) P8F Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK60 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug P067 P6A06 ) PUMW006 () ) P8666 P86 ) PZZ9006 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () To ESN UAT. () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. P For Additional PERKINS Products Refer to Page P88

187 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application T6../ TC6.. TURBOCHARGED 6 Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK66 ) PBK66 Piston-Liner PCK a) P8676 b) P80 c) P89 () Main Bearing PUMB00 PUMB00A.00 PUMB00B.00 PUMB00C.00 PUME0007 PUME0007A.00 PUME0007B.00 PUME0007C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs MF AGRICULTURAL () (TH79) 0 (TT7) 0 () (TH/TH7) NEW IDEA Combine (TH8) WHITE FARM -0 (TH8) 6 ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ9009 Valve Train PVTK60 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT006 ) PULB006 ) P687 ) Valve, Intake ) Valve, Exhaust ) P X6 ) PA0 X6 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) P X6 ) P76 X ) P8 X ) Guide, Valve a) Intake b) Exhaust a) PF00 X6 b) PJ00 X6 6 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) N/A ) P6 ) P07 ) P79 ) Spring, Valve a) Inner b) Outer a) P7 X b) P7 X ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 () ) P67 ) P77 ) P9 ) P7 6) P8F (7) ) Lock, Valve 6) Seal, Valve ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P067 P6A06 ) PUMW006 () PUMW0 () ) P8666 (6) P86 ) PZZ9006 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () From ESN UA8970L. () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished () Do Not Use on Build No: TH79. Liner in.00" Oversize, P898, are also available. () Use on Build No: TH8. (6) Check with Build List. () From ESN UA6T. (7) Do not use on Build numbers TH and TH8. For Additional PERKINS Products Refer to Page P88 P

188 Application Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK667 ) PBK667 Piston-Liner PUMK0 a) P867 b) P80 c) P89 () Main Bearing PUMB00 PUMB00A.00 PUMB00B.00 PUMB00C.00 PUME000 PUME000A.00 PUME000B.00 PUME000C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs WHITE FARM -8 Tractor (TG) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ9009 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT006 ) PULB006 ) P687 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) N/A ) P6 ) P07 ) P79 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) N/A ) P67 ) P77 ) P9 ) P7 6) P8F Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK66 ) P X6 ) P9 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P067 P6A06 ) PUMW006 ) P8666 P86 ) PZZ9006 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. P6 For Additional PERKINS Products Refer to Page P88

189 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application Cyl, Rope & Lip Seal s include both rear seals Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK668 ) PBK668 Piston-Liner PUMK0 a) P867 b) P80 c) P89 () Main Bearing P800 P800A.00 P800B.00 P800C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs WHITE COCKSHUTT 7600 Combine (TJ89) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P68808 X P8F7 ) PZZ90090 () ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB006 ) P68 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) N/A ) P6 ) P07 ) P7 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK60 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug P067 P6A06 ) PUMW0 ) P860 X ) PZZ9006 ) P8 ) P8 ) N/A ) Not Used () From ESN U9L. () Parallel, Semi Finished Liner, P8, Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. For Additional PERKINS Products Refer to Page P88 P7

190 Application Cyl, Lip Seal Bore:.8770 in mm CLARK EQUIPMENT (TW70007) C D (TW70) HYSTER H H (TW7000) MF AGRICULTURAL 0 (TW087) TX0 Combine (TW0) PERKINS USA General Industrial (TW) WHITE FARM 8600 Combine (TW70) 6 ) Engine O/H ) Basic Engine ) POK67 ) PBK67 ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ90086 Valve Train PVTK6 Piston-Liner PUMK07 a) P8670 b) P80 c) P89 () ) Head Gasket ) PULT007 ) PULB006 ) P68H0 ) Valve, Intake ) Valve, Exhaust ) P X6 ) PA0 X6 Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Guide, Valve a) Intake b) Exhaust a) PF00 X6 b) PJ00 X6 P80 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) Spring, Valve a) Inner b) Outer P80A.00 P80B.00 P80C.00 a) P7 X b) P7 X Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs ) Top Gasket ) Bottom Gasket ) P60 ) P6 ) P07 ) P7 P79 () 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F ) Lock, Valve 6) Seal, Valve ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug PF0 P679 ) P07 () PUMW09 () ) P86 X ) PZZ9006 ) P8 ) P8 ) PZZ800 ) P66608 (Bayonet Fitting) () Use Only on Build No: TW700. () Check with Build List. () Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. P8 For Additional PERKINS Products Refer to Page P88

191 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK67 ) PBK67 Piston-Liner PCK69 a) PULP009 b) P807 c) P89 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs CLARK EQUIPMENT C Shovel (TW7006) NEW HOLLAND Stack Cruiser (TW700) WHITE FARM 8600 Combine (TW7000) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ90086 Valve Train ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT007 ) PULB006 ) P68H0 ) Valve, Intake ) Valve, Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Guide, Valve a) Intake b) Exhaust ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) P60 ) P6 ) P07 ) P7 () P79 () ) Spring, Valve a) Inner b) Outer 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug PF0 P679 ) P07 () PUMW09 () ) P86 X ) PZZ9006 ) P8 ) P8 ) PZZ800 ) P66608 (Bayonet Fitting) () Use on Build No: TW7006. () Use on Build No: TW700/TW7000. () Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. () Use on Build No: TW7000. For Additional PERKINS Products Refer to Page P88 P9

192 Application Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK67 ) PBK67 Piston-Liner PCK69 a) PULP009 b) P807 c) P89 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs MF AGRICULTURAL 699 (TW) 67 (TW008) 090 (TW9) WHITE FARM -8 Tractor (TW70008) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ90086 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT00 ) PULB006 ) P68H0 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) P60 ) P6 ) P07 ) P7 () P79 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 () ) P67 ) P77 ) P9 ) P7 6) P8F () Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug PF0 P679 ) P07 ) P86 X ) PZZ9006 ) P8 ) P8 ) PZZ800 ) P66608 (Bayonet Fitting) () Use Only with Build No: TW008. () Do Not Use on Build No: TW () Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. () Do not use on Build TW P0 For Additional PERKINS Products Refer to Page P88

193 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK67 ) PBK67 Piston-Liner PUMK07 a) P8670 b) P80 c) P89 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs MARINE Pleasure Craft (TW96/7) Commercial/Pleasure Craft (TW70087) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ90086 ) Top Gasket ) Bottom Gasket ) Head Gasket ) P68 ) PULB006 ) P68H0 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ90009 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) P60 ) P6 ) P07 ) P79 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK67 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) N/A b) N/A ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF0 P679 ) N/A ) P860 X ) PZZ9006 ) P8 ) P8 ) PZZ8007 ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. For Additional PERKINS Products Refer to Page P88 P

194 Application T6.. TURBOCHARGED 6 Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK680 ) PBK680 Piston-Liner PUMK007 a) P6880 b) P800 c) P89 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 PUME000 PUME000A.00 PUME000B.00 PUME000C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs MF AGRICULTURAL 60 (TU07/TU6) 660 (TU076) TX70/80 (TU006) WHITE FARM 8800 Combine (TU7000) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ900 Valve Train ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT008 ) PULB006 ) P68H0 ) Valve, Intake ) Valve, Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ900 ) Guide, Valve a) Intake b) Exhaust ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) P60 ) P6 ) P07 ) P79 ) Spring, Valve a) Inner b) Outer 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug PF06 P679 ) PUMW0 ) P86 X ) PZZ9006 ) P8 ) P8 ) PZZ800 ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. P For Additional PERKINS Products Refer to Page P88

195 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application T6.. TURBOCHARGED 6 Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK68 ) PBK68 Piston-Liner PUMK007 a) P6880 b) P800 c) P89 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 PUME000 PUME000A.00 PUME000B.00 PUME000C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs JCB 8 Wheel Loader (TU007) MF AGRICULTURAL 680/68 (TU0/6) 0 (TU) RX9 (TU00) WHITE FARM -0 (TU7008) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ900 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT00 ) PULB006 ) P68H0 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ900 ) Camshaft ) Tappet ) Push Rod ) P60 ) P6 ) P07 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug PF06 P679 ) P07 () ) P86 X ) PZZ9006 ) P8 ) P8 ) PZZ800 ) P66608 (Bayonet Fitting) () Use Only on Build No: TU/TU7008. () Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. For Additional PERKINS Products Refer to Page P88 P

196 Application T6.. TURBOCHARGED 6 Cyl, Lip Seal Bore:.8770 in mm ) Engine O/H ) Basic Engine ) POK68 ) PBK68 Piston-Liner PUMK007 a) P6880 b) P800 c) P89 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 PUME000 PUME000A.00 PUME000B.00 PUME000C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs MARINE Pleasure Craft Pleasure Craft Pleasure Craft (TU0) (TU700) (TU7007) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ900 Valve Train ) Top Gasket ) Bottom Gasket ) Head Gasket ) P68 ) PULB006 ) P68H0 ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ900 ) Camshaft ) Tappet ) Push Rod ) Camshaft Gear ) P60 ) P6 ) P07 ) P79 ) Spring, Valve a) Inner b) Outer 6 ) Aux. Drive Shaft ) Gear & Shaft ) Gear ) Front Bush ) Rear Bush 6) Seal ) P7 ) P67 ) P77 ) P9 ) P7 6) P8F ) Lock, Valve 6) Seal, Valve 6 PVTK67 ) P X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) N/A b) N/A ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF06 P679 ) N/A ) P860 X ) PZZ9006 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner, P89, and Finished Liner in.00" Oversize, P898, are also available. P For Additional PERKINS Products Refer to Page P88

197 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0- NATURALLY ASPIRATED Cyl USED IN KR BUILDS Bore:. in 8.00 mm Stroke:.9 in mm Displacement: in.6 Liter Compression Ratio: : ) Engine O/H ) Basic Engine ) POK0 POK0 0.0 ) PBK0 PBK0 0.0 ) Front Seal ) Rear Seal ) P ) P Valve Train Piston Ring ) PULC007 () ) P77 ) P09960 ) P9960 ) P Main Bearing P079 P98860 PUME00 P079B 0.0 P07970 P07970B 0.0 Per Engine P P of Pairs ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Cylinder Head Gasket ) Nut, Con Rod ) Seal Rocker Box ) Seal, Cyl Head Cover ) Con Rod ) Oil Pan Gasket ) Valve, Intake ) Valve, Exhaust PUME00A.00 PUME00B.00 ) P9876 X ) P760 X8 ) P00090 X8 ) P060 ) Spring, Valve of Pairs ) P996600/0 of Pcs ) Tappet ) Seal, Intake Valve ) Seal, Exhaust Valve ) P0660 ) P X ) P00600 X ) Lock, Valve ) Thrust Washer ) Crank Bushing ) P987 P P PVTK0 ) P0660 X ) P07660 X ) P X8 ) P06070 X6 Water Pump Oil Pump Thermostat Repair Sleeve P079 PUMK866 P068 P0RS () Does not include Crankshaft Oil Seals. For Additional PERKINS Products Refer to Page P88 P

198 Application 0C- NATURALLY ASPIRATED SHIBAURA N8-C Cyl USED IN HL BUILDS Bore:. in 8.00 mm Stroke:. in mm Displacement: 9 in.96 Liter Compression Ratio:.: ) Engine O/H ) Basic Engine ) POK6 POK7 0.0 ) PBK6 PBK7 0.0 ) Front Seal ) Rear Seal ) P ) P Valve Train Piston Ring P07 P07B 0.0 P07970 P07970B 0.0 Per Engine ) PULC008 ) P70 ) P09960 ) P9960 ) P Main Bearing P ) Thrust Washer ) Crank Bushing P ) P X P P P P of Pairs ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Cylinder Head Gasket ) Nut, Con Rod ) Seal Rocker Box ) Seal, Cyl Head Cover ) Con Rod ) Oil Pan Gasket ) Valve, Intake ) Valve, Exhaust ) P9876 X ) P760 X6 ) P00090 X6 ) P06 ) Spring, Valve of Pairs ) Tappet ) Seal, Intake Valve ) Seal, Exhaust Valve ) P0660 ) P X ) P00600 X ) Lock, Valve ) P987 P P PVTK08 ) P0660 X ) P07660 X ) P98770 X6 ) P06070 X Water Pump Oil Pump Thermostat Repair Sleeve P079 PUMK866 P068 P0RS P6 For Additional PERKINS Products Refer to Page P88

199 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C-7 NATURALLY ASPIRATED Cyl USED IN HM BUILDS Bore:. in 8.00 mm Stroke:. in mm Displacement: 0. in.66 Liter Compression Ratio:.: ) Engine O/H Piston Ring ) Basic Engine P079 P079B 0.0 ) POK8 POK9 0.0 P07970 ) PBK8 P07970B 0.0 PBK9 0.0 ) Front Seal ) Rear Seal ) P ) P Valve Train Per Engine ) PULC008 ) P70 ) P09960 ) P9960 ) P Main Bearing P ) Thrust Washer ) Crank Bushing P ) P X P P P P of Pairs ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Cylinder Head Gasket ) Nut, Con Rod ) Seal Rocker Box ) Seal, Cyl Head Cover ) Con Rod ) Oil Pan Gasket ) Valve, Intake ) Valve, Exhaust ) P9876 X ) P760 X6 ) P00090 X6 ) P060 ) Spring, Valve of Pairs ) Tappet ) Seal, Intake Valve ) Seal, Exhaust Valve ) P0660 ) P X ) P00600 X ) Lock, Valve ) P987 P P PVTK09 ) P0660 X ) P07660 X ) P X6 ) P06070 X Water Pump Oil Pump Thermostat Repair Sleeve P079 PUMK866 P068 P0RS For Additional PERKINS Products Refer to Page P88 P7

200 Application 0C- NATURALLY ASPIRATED SHIBAURA N8L-C Cyl USED IN HP BUILDS ) Engine O/H ) Basic Engine ) POK0 POK0 0.0 ) PBK0 PBK0 0.0 Piston Ring Main Bearing P079 P98860 PUME00 P079B 0.0 P07970 P07970B 0.0 Per Engine P P of Pairs PUME00A.00 PUME00B.00 of Pairs ) P996600/0 of Pcs ) Thrust Washer ) Crank Bushing ) P987 P P Bore:. in 8.00 mm Stroke:.9 in mm Displacement: in.6 Liter Compression Ratio:.: ) Front Seal ) Rear Seal ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Cylinder Head Gasket ) Nut, Con Rod ) Seal Rocker Box ) Seal, Cyl Head Cover ) Con Rod ) Oil Pan Gasket ) Tappet ) Seal, Intake Valve ) Seal, Exhaust Valve ) P ) P ) PULC007 () ) P77 ) P09960 ) P9960 ) P ) P9876 X ) P760 X8 ) P00090 X8 ) P060 ) P0660 ) P X ) P00600 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Spring, Valve ) Lock, Valve PVTK0 ) P0660 X ) P07660 X ) P X8 ) P06070 X6 Water Pump Oil Pump Thermostat Repair Sleeve P079 PUMK866 P068 P0RS () Does not include Crankshaft Oil Seals. P8 For Additional PERKINS Products Refer to Page P88

201 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C-T TURBOCHARGED SHIBAURA N8LT-C Cyl USED IN HR BUILDS ) Engine O/H ) Basic Engine ) POK06 POK ) PBK06 PBK Piston Ring Main Bearing P078 P98860 PUME00 P078B 0.0 P00 P00B 0.0 Per Engine P P of Pairs PUME00A.00 PUME00B.00 of Pairs ) P996600/0 of Pcs ) Thrust Washer ) Crank Bushing ) P987 P P Bore:. in 8.00 mm Stroke:.9 in mm Displacement: in.6 Liter Compression Ratio:.: ) Front Seal ) Rear Seal ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Cylinder Head Gasket ) Nut, Con Rod ) Seal Rocker Box ) Seal, Cyl Head Cover ) Con Rod ) Oil Pan Gasket ) Tappet ) Seal, Intake Valve ) Seal, Exhaust Valve ) P ) P ) P0TOG () ) P77 ) P09960 ) P9960 ) P ) P9876 X ) P760 X8 ) P00090 X8 ) P060 ) P0660 ) P X ) P00600 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Spring, Valve ) Lock, Valve PVTK0 ) P0660 X ) P07660 X ) P X8 ) P06070 X6 Water Pump Oil Pump Thermostat Repair Sleeve P079 PUMK866 P068 P0RS () Does not include Crankshaft Oil Seals. For Additional PERKINS Products Refer to Page P88 P9

202 Application 00.0 NATURALLY ASPIRATED Cyl, Lip Seal s include both rear seals Bore:.97 in 00 mm HYSTER H70-XL S80-SXL JCB CX Backhoe Backhoe Loader (AA708) (AA706) (AA008) (AA0608) ) Engine O/H ) Basic Engine ) POK70 ) PBK70 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 () P8F70 () ) PZZ900 Piston-Liner PCK a) PMXF00 b) P8A09 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan ) PULT078 ) PULB0 ) P68A0 ) P68E0 ) PUMK0600 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P6 ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) N/A ) P7 ) N/A Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve () a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK ) PL0 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF0 P6A067 ) PE0 ) P86 ) PZZ900 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available, PX0. () Use Single Spring, Valve P7P0 for low speed applications (Not included in ). () To ESN U766H. () From ESN U767H. P60 For Additional PERKINS Products Refer to Page P88

203 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 00.0 NATURALLY ASPIRATED Cyl, Lip Seal s include both rear seals Bore:.97 in 00 mm GENSETS FG WILSON GENSET (AA07) (AA70) PERKINS SABRE GM ELECTROPAK (AA0) (AA06) ) Engine O/H ) Basic Engine ) POK78 ) PBK78 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 () P8F70 () ) PZZ900 Piston-Liner PCK6 a) PMXF00 b) P8A09 c) PX06 () Main Bearing P88 P88A.00 P88B.00 P88C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan ) PULT078 ) PULB0 ) P68A0 ) P68E0 ) PUMK0600 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X ) P76 X8 ) P8 X8 ) PZZ90009 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P6 ) P6 ) P07 ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) N/A ) P7 ) N/A Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve () a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK ) PL0 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF0 P6A067 ) PE0 ) P86 ) PZZ900 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available, PX06. () To ESN U766H. () From ESN U767H. For Additional PERKINS Products Refer to Page P88 P6

204 Application 00.0T TURBOCHARGED Cyl, Lip Seal Bore:.97 in 00 mm ) Engine O/H ) Basic Engine ) POK7 ) PBK7 Piston-Liner PCK a) PMXF00 b) P8A0 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 PUME0006 PUME0006A.00 PUME0006B.00 PUME0006C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs To ESN U60800W (99) JCB CX Backhoe (AB0609) CX Backhoe (AB079) Loader (AB0) ) Front Seal ) Rear Seal ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P8F6 ) P8F7 ) PZZ90 ) PULT078 ) PULB0 ) P68A0 ) P68E0 ) PUMK0600 ) P X ) P76 X8 ) P8 X8 ) PZZ900 () PZZ9008 () () ) P x ) P6 ) P6 ) P07 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve () a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) PL07 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF06 P6A067 ) PE0 ) P86 ) PZZ900 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available, PX0. () Use Single Spring, Valve 7P0 for low speed applications (Not available from Maxiforce). () Check with Build List. () Fracture Split Type. P6 For Additional PERKINS Products Refer to Page P88

205 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 00.0T TURBOCHARGED Cyl, Lip Seal s include both rear seals Bore:.97 in 00 mm From ESN U6080W (99) JCB CX Backhoe (AB0609) CX Backhoe (AB079) Loader (AB0) ) Engine O/H ) Basic Engine ) POK7 ) PBK7 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 () P8F70 () ) PZZ90 Piston-Liner PCK7 a) PMXF00 b) P8A06 c) PX0 () Main Bearing P88 P88A.00 P88B.00 P88C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod PUME0006 PUME0006A.00 PUME0006B.00 PUME0006C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan ) PULT078 ) PULB0 ) P68A0 ) P68E0 ) PUMK0600 ) P X ) P76 X8 ) P8 X8 ) PZZ900 () ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P6 ) P6 ) P07 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve () a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK7 ) PL07 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF06 P6A067 ) PE0 ) P86 ) PZZ900 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available, PX0. () Use Single Spring, Valve 7P0 for low speed applications (Not available from Maxiforce). () Check with Build List. () To ESN U766H. () From ESN U767H. For Additional PERKINS Products Refer to Page P88 P6

206 Application 00.0T TURBOCHARGED / INTERCOOLED Cyl, Lip Seal Bore:.970 in mm Stroke:.00 in 7.00 mm GRADE L Piston height: 70.6 mm.76 in YE Builds and some YD builds used in Emission Controlled Areas ) Engine O/H ) Basic Engine ) POK96 ) PBK96 ) Front Seal ) Rear Seal ) P8F6 ) P8F7 ) PZZ90 Piston-Liner PCK6 a) PULF00 b) P8A06 c) PX06 () Main Bearing P88 P88A.00 P88B.00 P88C.00 PUME0006 PUME0006A.00 PUME0006B.00 PUME0006C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Dowel, Con Rod ) Con Rod Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Crankshaft ) Head Gasket ) Oil Pan ) PULT078 ) PULB0 ) P68A0 ) P68E0 ) PUMK0600 ) PE00 X () ) P86 X8 ) P6A00 X8 ) PZZ906 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P x ) P6 ) P6 ) P07 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK7 ) PL07 X ) PA0 X a) PF00 X b) PJ00 X a) P7 X8 b) P7 X8 ) P708 X6 6) P877 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF06 P6A067 ) PE0 ) P86 ) PZZ900 ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available, PX06. () Use with Con Rod ZZ () 0 Angle. P6 For Additional PERKINS Products Refer to Page P88

207 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 00.0/0T TURBOCHARGED or NATURALLY ASPIRATED ) Engine O/H ) Basic Engine Cyl, Lip Seal ) POK7/ s include both rear seals POK7/0 ) PBK7 Bore:.97 in 00 mm Piston-Liner PCK76 a) PULP007 b) P8A0 c) PX06 () Main Bearing P88 P88A.00 P88B.00 P88C.00 PUME0006 (6) PUME0006A.00 PUME0006B.00 PUME0006C.00 Thrust Washer P7/6 Per Engine of Pairs of Pairs of Pairs ENGINES BUILDS.0 AJ T.0 AK CCW.0 AM N.0 AP TN.0 AQ JCB Backhoe Shovel Loader (AK068) (AM060) MF AGRICULTURAL Tractor (AK99) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 () P8F70 () ) PZZ90 (7) PZZ906 (7) ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gsk ) PULT00 ) PULB7 (9) ) P68E0 ) P68A09 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) PE0 X ) P76 X8 PV00 X8 () ) P8 X8 ) PC (8) ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) P X ) P6 ) P07 ) P8M0 X ) P8M06 X ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) N/A ) P7L0 ) N/A Valve Train 0 a) Angle b) 0 Angle ) Valve, Intake ) Valve, Exhaust a) Angle b) 0 Angle ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve ) Lock, Valve a) PVTK b) PVTK a) PD0 X b) PL08 X a) PD0 X b) PD0 X a) PA0 X b) P8A70 X ) P7P09 X8 ) PW00 X6 Oil Pump Lift Pump ) Water Pump ) Thermostat ) Cylinder Head ) Glowplug PF06 PF0 () P6A067 ) PUMW09 ) P8C06 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available, PX06. () Use in engines with Balancer Units. () To ESN U766H. () From ESN U767H. () Use with Fractured Split Con Rod. (6) Use, PUME00, from ESN U878J. Order POK7/NB or /0NB or PBK7NB and nominate the bearings. (7) PZZ90 To ESN U877J and PZZ906 From ESN U878J. (8) Grade J, Color Coded Green. (9) May use Bottom Gasket PULB0. For Additional PERKINS Products Refer to Page P88 P6

208 Application 00. NATURALLY ASPIRATED Cyl, Lip Seal s include both rear seals Sleeveless Engines Bore:.0 in 0 mm ENGINES BUILDS. AR N. AS JCB (AR0690) ) Engine O/H ) Basic ) POK7 POK7 0.0 POK76.00 ) PBK7 PBK7 0.0 PBK76.00 ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 () P8F70 () ) PZZ900 (6) PZZ906 (6) a) Piston b) Ring a) PULP008 PULP008B 0.0 PULP008D.00 ) Head Gasket ) Valve Cover Gsk ) PULT07 ) PULB7 (7) ) P68E0 ) P68A09 Main Bearing P88 P88A.00 P88B.00 P88C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) PE0 X ) P76 X8 PV00 X8 () ) P8 X8 ) PC () P80 () P80A.00 P80B.00 P80C.00 ) P X ) P6 ) P07 ) P8M0 X ) P8M06 X Thrust Washer P7/6 b) P8A0 P8A P8A07.00 Per Engine of Pairs of Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) P768 ) P7L0 ) N/A Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve ) Lock, Valve PVTK ) PH0 X ) PD06 X a) PA0 X b) P8A70 X ) P7P X8 ) PW00 X6 Oil Pump Lift Pump ) Water Pump ) Thermostat ) Cylinder Head ) Glowplug PF0 P6A067 ) PUMW09 ) P8C06 ) N/A ) P66608 (Bayonet Fitting) () To ESN U766H. () From ESN U767H. () Use with fractured split conrod. () Grade J, Color Coded Green. P66 () Use, PUME00, from ESN U878J. Order POK7/NB or /0NB or PBK7NB and nominate the bearings. (6) PZZ900 To ESN U877J and PZZ906 From ESN U878J. (7) May use Bottom Gasket PULB0. For Additional PERKINS Products Refer to Page P88

209 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application Cyl, Lip Seal s include both rear seals Bore:.970 in mm ) Engine O/H ) Basic Engine ) POK690 ) PBK690 Piston-Liner PCK a) PMXF00 b) P8A09 c) PX0 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 P80 P80A.00 P80B.00 P80C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs HYSTER H6-80 Forklift (YA707) JCB Wheeled Loader Industrial (YA0) (YA09) ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod MF AGRICULTURAL 96 (YA7) 99 (YA0) ) P8F6 ) P8F7 () P8F70 () ) PZZ90087 ) PULT79 ) PULB0 ) P68H0 ) P X6 ) P76 X ) P8 X ) PZZ90009 ) P X ) P607 ) P6 ) P07 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve () a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) PL0 X6 ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF0 P679 ) PUMW009 ) P86 X ) N/A ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Flanged, Semi Finished Liner available, PX0. () Use Single Valve Spring, 7P0 for low speed applications, not available from Maxiforce. () To ESN U767H. () From ESN U767H. For Additional PERKINS Products Refer to Page P88 P67

210 Application T TURBOCHARGED 6 Cyl, Lip Seal Bore:.970 in mm ) Engine O/H ) Basic Engine ) POK69 ) PBK69 Piston-Liner PCK a) PMXF00 b) P8A0 c) PX0 () Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 PUME000 PUME000A.00 PUME000B.00 PUME000C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs To ESN 7976X JCB Front Loader (YB09) MF AGRICULTURAL 6 (YB) PERKINS USA Power Units Power Units (YB07) (YB060) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 ) PZZ9008 ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT79 ) PULB0 ) P68H0 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ900 () ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) P X ) P607 ) P6 ) P07 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) PL07 X6 () ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF07 P679 ) PUMW009 ) P86 X ) N/A ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Check with Build List. 0 () Angle. () Flanged, Semi Finished Liner available, PX0. P68 For Additional PERKINS Products Refer to Page P88

211 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application T TURBOCHARGED 6 Cyl, Lip Seal s include both rear seals Bore:.970 in mm From ESN 7977X JCB Front Loader (YB09) MF AGRICULTURAL 6 (YB) PERKINS USA Power Units (YB07) ) Engine O/H ) Basic Engine ) POK69 ) PBK69 ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 () P8F70 () ) PZZ9008 Piston-Liner PCK7 a) PMXF00 b) P8A06 c) PX0 () ) Head Gasket ) PULT79 ) PULB0 ) P68H0 Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) P X6 ) P76 X ) P8 X ) PZZ900 () PUME000 PUME000A.00 PUME000B.00 PUME000C.00 Thrust Washer P7/6 6 Per Engine of 7 Pairs of 6 Pairs of Pairs ) Top Gasket ) Bottom Gasket ) Camshaft ) Tappet ) Push Rod ) Bushing, Cam ) P X ) P607 ) P6 ) P07 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) PL07 X6 () ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF07 P679 ) PUMW009 ) P86 ) N/A ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Check with Build List. 0 () 0 Angle. () Flanged, Semi Finished Liner available, PX0. () To ESN U767H. () From ESN U767H. For Additional PERKINS Products Refer to Page P88 P69

212 Application T TURBOCHARGED / INTERCOOLED 6 Cyl, Lip Seal s include both rear seals Bore:.970 in mm ) Engine O/H ) Basic Engine ) POK696 ) PBK696 Piston-Liner PCK6 a) PULF00 b) P8A06 c) PX06 () Main Bearing PUMB000 PUME000 (6) PUMB000A.00 PUME000A.00 PUMB000B.00 PUME000B.00 PUMB000C.00 PUME000C.00 6 Per Engine of 7 Pairs of 6 Pairs Thrust Washer P7/6 of Pairs Stroke:.00 in 7.00 mm GRADE L Piston height: 70.6 mm.76 in ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Dowel, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod YE Builds and some YD builds used in Emission Controlled Areas ) P8F6 ) P8F7 () P8F70 () ) PZZ9008 ) PULT79 ) PULB0 ) P68H0 ) PE00 X6 () ) P86 X ) P6A00 X ) PZZ906 ) P X ) P607 ) P6 ) P07 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 PVTK6 ) PL07 X6 () ) PA0 X6 a) PF00 X6 b) PJ00 X6 a) P7 X b) P7 X ) P708 X 6) P877 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head ) Glowplug PF07 P679 ) PUMW009 ) P86 ) N/A ) P8 ) P8 ) N/A ) P66608 (Bayonet Fitting) () Use with Con Rod ZZ () 0 Angle. () Flanged, Semi Finished Liner available, PX06. () To ESN U767H. P70 () From ESN U767H. (6) Use, PUME00, from ESN U808J. For engine kit with these bearings, order POK69/NB or /0NB or PBK69NB and nominate the bearings. For Additional PERKINS Products Refer to Page P88

213 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application T TURBOCHARGED or NATURALLY ASPIRATED 6 Cyl, Lip Seal s include both rear seals Bore:.970 in mm ENGINES BUILDS 6.60 YG T6.60 YH CCW6.60 YK CCA6.60 YJ M c CORMICK MTX 0 (YH098) MTX (YH099) MTX 0 (YH090) MTX (YK09) MTX 70 (YJ9) MF AGRICULTURAL 680 (YH0) ) Engine O/H ) Basic Engine ) POK69/ POK69/0 ) PBK69 ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F7 () P8F70 () ) PZZ9008 Piston-Liner PCK76 a) PULP007 b) P8A0 c) PX06 () ) Top Gasket ) Bottom Gasket ) Head Gasket ) PULT00 ) PULB0 ) P68H0 Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod 6 Per Engine of 7 Pairs of 6 Pairs ) Con Rod PUME000 () PUME000A.00 PUME000B.00 PUME000C.00 ) PE0 X6 ) P76 X PV00 X () ) P8 X ) PC (6) Thrust Washer P7/6 of Pairs ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) P X ) P6 ) P07 ) P8M0 X6 ) P8M06 X6 Valve Train 0 a) Angle b) 0 Angle ) Valve, Intake ) Valve, Exhaust a) Angle b) 0 Angle ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve ) Lock, Valve a) PVTK68 b) PVTK69 a) PD0 X6 b) PL08 X6 a) PD0 X6 b) PD0 X6 a) PA0 X6 b) P8A70 X6 ) P7P09 X ) PW00 X Oil Pump Lift Pump ) Water Pump ) Thermostat PF07 P679 ) PUMW09 ) P8C06 () Flanged, Semi Finished Liner available, PX06. () To ESN U767H. () From ESN U767H. () Use with Fractured Split Con Rod. () Use, PUME00, from ESN U808J. For engine kit with these bearings, order POK69/NB or /0NB or PBK69NB and nominate the bearings. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P7

214 Application 0C - (DC) 0B - (DF) 0A - (DJ) Bore: NATURALLY ASPIRATED. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 0 in. Liter MF AGRICULTURAL 0 (DC8077) (DC807) ) Engine O/H ) Basic ) POK0 POK 0.0 POK.00 ) PBK0 PBK 0.0 PBK.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP0 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP0 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) P8F6 ) P8F70 Valve Train Piston & Ring PP0 PP0 0.0 mm PP0.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT0 ) PULB079 ) P68E09 ) P68A07 ) P68K08 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB009 PUME008 PUMB009A.00 PUMB009B.00 PUMB009C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Guide, Valve (Intake & Exhaust) PUME008A.00 PUME008B.00 PUME008C.00 ) PA00 X ) PV00 X6 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) PD07 X ) P6 ) P07 ) P8M7 X ) P8M9 X ) Lock, Valve PVTK07 ) PH07 X ) PA X ) PA0 X6 ) P7A06 X6 ) PW00 X Oil Pump Lift Pump (Electronic) ) Water Pump ) Water Pump Gasket PF07 () PULPK009 ) PUMW097 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P7 For Additional PERKINS Products Refer to Page P88

215 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C - (DC) Bore: NATURALLY ASPIRATED. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 0 in. Liter Used in Wheeled Tractors ) Engine O/H ) Basic ) POK POK 0.0 POK.00 ) PBK PBK 0.0 PBK.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP0 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP0 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) P8F6 ) P8F70 Valve Train Piston & Ring PP0 PP0 0.0 mm PP0.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT0 ) PULB080 ) P68E09 ) P68A07 ) P68K08 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB009 PUME008 PUMB009A.00 PUMB009B.00 PUMB009C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Guide, Valve (Intake & Exhaust) PUME008A.00 PUME008B.00 PUME008C.00 ) PA00 X ) PV00 X6 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) PD07 X ) P6 ) P07 ) P8M7 X ) P8M9 X ) Lock, Valve PVTK07 ) PH07 X ) PA X ) PA0 X6 ) P7A06 X6 ) PW00 X Oil Pump Lift Pump (Electronic) ) Water Pump ) Water Pump Gasket PF07 () PULPK009 ) PUMW097 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P7

216 Application 0C - T (DD) 0C - TA (DE) 0A - T (DG) TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 0 in. Liter MF AGRICULTURAL S/F/GE/GEV (DD799) 0/6 (DD8078) 0 (DD8) ) Engine O/H ) Basic ) POK POK6 0.0 POK7.00 ) PBK PBK6 0.0 PBK7.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) P8F6 ) P8F70 Piston & Ring PP0 PP mm PP07.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT0 ) PULB079 ) P68E09 ) P68A07 ) P68K08 Main Bearing PUMB009 PUME008 PUMB009A.00 PUMB009B.00 PUMB009C.00 ) Bush, Con Rod ) Bolt, Con Rod PUME008A.00 PUME008B.00 PUME008C.00 ) PA00 X ) PV00 X6 ) PC () Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) PD07 X ) P6 ) P07 ) P8M7 X ) P8M9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve PVTK07 ) PH07 X ) PA X ) PA0 X6 ) P7A06 X6 ) PW00 X Oil Pump Lift Pump (Electronic) ) Water Pump ) Water Pump Gasket PF07 () PULPK009 ) PUMW097 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P7 For Additional PERKINS Products Refer to Page P88

217 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C - T (DD) TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 0 in. Liter Used in Wheeled Tractors ) Engine O/H ) Basic ) POK POK 0.0 POK6.00 ) PBK PBK 0.0 PBK6.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) P8F6 ) P8F70 Piston & Ring PP0 PP mm PP07.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT0 ) PULB080 ) P68E09 ) P68A07 ) P68K08 Main Bearing PUMB009 PUME008 PUMB009A.00 PUMB009B.00 PUMB009C.00 ) Bush, Con Rod ) Bolt, Con Rod PUME008A.00 PUME008B.00 PUME008C.00 ) PA00 X ) PV00 X6 ) PC () Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) PD07 X ) P6 ) P07 ) P8M7 X ) P8M9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve PVTK07 ) PH07 X ) PA X ) PA0 X6 ) P7A06 X6 ) PW00 X Oil Pump Lift Pump (Electronic) ) Water Pump ) Water Pump Gasket PF07 () PULPK009 ) PUMW097 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P7

218 Application 0A - (DK) Bore: NATURALLY ASPIRATED. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 0 in. Liter Genset (DK80) ) Engine O/H ) Basic ) POK0 POK 0.0 POK.00 ) PBK0 PBK 0.0 PBK.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) P8F6 ) P8F70 Piston & Ring PP0 PP mm PP07.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT0 ) PULB079 ) P68E09 ) P68A07 ) P68K08 Main Bearing PUMB009 PUME008 PUMB009A.00 PUMB009B.00 PUMB009C.00 ) Bush, Con Rod ) Bolt, Con Rod PUME008A.00 PUME008B.00 PUME008C.00 ) PA00 X ) PV00 X6 ) PC () Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) PD07 X ) P6 ) P07 ) P8M7 X ) P8M9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve PVTK07 ) PH07 X ) PA X ) PA0 X6 ) P7A06 X6 ) PW00 X Oil Pump Lift Pump (Electronic) ) Water Pump ) Water Pump Gasket PF07 () PULPK009 ) PUMW097 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P76 For Additional PERKINS Products Refer to Page P88

219 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C - 0C - E Bore: NATURALLY ASPIRATED. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter INDUSTRIAL BACKHOE LOADER GENSET (RE88) (RE) ) Engine O/H ) Basic ) POK POK 0.0 POK.00 ) PBK PBK 0.0 PBK.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP0 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP0 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F70 ) PZZ90 Valve Train Piston & Ring PP0 PP0 0.0 mm PP0.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K07 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Guide, Valve (Intake & Exhaust) PUME00A.00 PUME00B.00 PUME00C.00 ) PA00 X ) PV00 X8 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X 6 ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P77

220 Application 0C - 0C - E Bore: NATURALLY ASPIRATED. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter TRACTORS INDUSTRIAL (RE896) (RE808) ) Engine O/H ) Basic ) POK POK6 0.0 POK7.00 ) PBK PBK6 0.0 PBK7.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP0 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP0 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F70 ) PZZ90 Valve Train Piston & Ring PP0 PP0 0.0 mm PP0.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K06 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 ) Bush, Con Rod ) Bolt, Con Rod PUME00A.00 PUME00B.00 PUME00C.00 ) PA00 X ) PV00 X8 ) PC () Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X 6 ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P78 For Additional PERKINS Products Refer to Page P88

221 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C - 0C - E Bore: NATURALLY ASPIRATED. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter AGRICULTURAL AGCO S/F/V (RE7990) GE/GEV (RE7990) C (RE87) 7 (RE787) 8 (RE780) (RE787/RE797) (RE78/RE799) JCB Telehandler (RE) ) Engine O/H ) Basic ) POK80 POK8 0.0 POK8.00 ) PBK80 PBK8 0.0 PBK8.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP0 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP0 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F70 ) PZZ90 Valve Train Piston & Ring PP0 PP0 0.0 mm PP0.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K06 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 ) Guide, Valve (Intake & Exhaust) ) Bush, Con Rod ) Bolt, Con Rod PUME00A.00 PUME00B.00 PUME00C.00 ) PA00 X ) PV00 X8 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve 6 ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P79

222 Application 0C - 0C - E Bore: NATURALLY ASPIRATED. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter INDUSTRIAL GEHL Skid Steer Loader (RE79) HYSTER Forklift (RE807) ) Engine O/H ) Basic ) POK8 POK8 0.0 POK8.00 ) PBK8 PBK8 0.0 PBK8.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP0 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP0 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F70 ) PZZ90 Valve Train Piston & Ring PP0 PP0 0.0 mm PP0.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K07 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 ) Guide, Valve (Intake & Exhaust) ) Bush, Con Rod ) Bolt, Con Rod PUME00A.00 PUME00B.00 PUME00C.00 ) PA00 X ) PV00 X8 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve 6 ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P80 For Additional PERKINS Products Refer to Page P88

223 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C - T (RG) 0C - ET (RH) 0A - TA (RJ) 0C - ETA (RK) 0A - T (RS) TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm ) Engine O/H ) Basic ) POK8 POK9 0.0 POK0.00 ) PBK8 PBK9 0.0 PBK0.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. Piston & Ring PP0 PP mm PP07.00 mm Per Engine Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 PUME00A.00 PUME00B.00 PUME00C.00 Thrust Washer P7/6 of Pairs of Pairs of Pairs 6 Displacement: 69 in. Liter Telehandler Genset (RG798) (RG7) PERKINS SABRE TWGM (RJ0890) ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F70 ) PZZ90 Valve Train ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K07 ) Valve, Intake ) Valve, Exhaust ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) PA00 X ) PV00 X8 ) PC () ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P8

224 Application 0C - TA (RG) 0C - ETA (RJ) TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ) Engine O/H ) Basic ) POK POK 0.0 POK.00 ) PBK PBK 0.0 PBK.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. Piston & Ring PP0 PP mm PP07.00 mm Per Engine Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 PUME00A.00 PUME00B.00 PUME00C.00 Thrust Washer P7/6 of Pairs of Pairs of Pairs 6 Telehandler Tractors JCB Telehandler (RG808) (RG897) (RJ6) ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve ) P8F6 ) P8F70 ) PZZ90 ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K06 ) PA00 X ) PV00 X8 ) PC () ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P8 For Additional PERKINS Products Refer to Page P88

225 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0A - T (RS) TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter GENSETS ) Engine O/H ) Basic ) POK POK 0.0 POK6.00 ) PBK PBK 0.0 PBK6.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F70 ) PZZ90 Valve Train Piston & Ring PP0 PP mm PP07.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K07 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 ) Guide, Valve (Intake & Exhaust) ) Bush, Con Rod ) Bolt, Con Rod PUME00A.00 PUME00B.00 PUME00C.00 ) PA00 X ) PV00 X8 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve 6 ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P8

226 Application 0A - T (RS) TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ) Engine O/H ) Basic ) POK7 POK8 0.0 POK9.00 ) PBK7 PBK8 0.0 PBK9.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. Piston & Ring PP0 PP mm PP07.00 mm Per Engine Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 PUME00A.00 PUME00B.00 PUME00C.00 Thrust Washer P7/6 of Pairs of Pairs of Pairs 6 GENSETS ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve ) P8F6 ) P8F70 ) PZZ90 ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K07 ) PA00 X ) PV00 X8 ) PC () ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P8 For Additional PERKINS Products Refer to Page P88

227 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 0C - T 0C - ET TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ) Engine O/H ) Basic ) POK86 POK POK88.00 ) PBK86 PBK PBK88.00 AGRICULTURAL ) Front Seal AGCO ) Rear Seal /F/GE/GEV (RG7989) S/F/GE/GEV ) Crankshaft (RG799) 9 (RG788) 9 (RG789/RG879) /6 (RG78/RG79) /6 (RG80/RG8) ) P8F6 T 60 (RG80/RG80) (RG78/RG00) ) P8F70 ) PZZ90 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. Valve Train Piston & Ring PP0 PP mm PP07.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K06 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 ) Guide, Valve (Intake & Exhaust) ) Bush, Con Rod ) Bolt, Con Rod PUME00A.00 PUME00B.00 PUME00C.00 ) PA00 X ) PV00 X8 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve 6 ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P8

228 Application 0C - T 0C - ET TURBOCHARGED Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter INDUSTRIAL BOBCAT Telehandler (RG798) PERKINS SABRE.TGM (RG088) ) Engine O/H ) Basic ) POK9 POK9 0.0 POK9.00 ) PBK9 PBK9 0.0 PBK9.00 * Piston consists of: ) X PMXFP0 Piston Std, X PUPRK000 Ring ) X PMXFP06 Piston 0.0 mm, X PUPRK000B Ring 0.0 mm. ) X PMXFP07 Piston.00 mm, X PUPRK000D Ring.00 mm. ) Front Seal ) Rear Seal ) Crankshaft ) P8F6 ) P8F70 ) PZZ90 Valve Train Piston & Ring PP0 PP mm PP07.00 mm Per Engine ) Top Gasket ) Bottom Gasket ) Head Gasket ) Valve Cover Gasket ) Oil Pan Gasket ) PULT07 ) PULB08 ) P68E0 ) P68A0 ) P68K07 ) Valve, Intake ) Valve, Exhaust Main Bearing PUMB008 PUME00 PUMB008A.00 PUMB008B.00 PUMB008C.00 ) Guide, Valve (Intake & Exhaust) ) Bush, Con Rod ) Bolt, Con Rod PUME00A.00 PUME00B.00 PUME00C.00 ) PA00 X ) PV00 X8 ) PC () ) Spring, Valve Thrust Washer P7/6 of Pairs of Pairs of Pairs ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Pushrod ) Seal, Exhaust Valve 6) Seal, Intake Valve 6 ) PD07 X ) PD ) P6 ) P07 ) P8M7 X 6) P8M9 X ) Lock, Valve PVTK ) PH07 X ) PA X ) PA0 X8 ) P7A06 X8 ) PW00 X6 Oil Pump PF07 () Lift Pump (Electronic) PULPK008 ) Water Pump ) Water Pump Gasket ) PUMW09 ) P68A0 () Not to be used on engines with balancer units. () Grade J, Color Coded Green. P86 For Additional PERKINS Products Refer to Page P88

229 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Application 06 - E60TA Bore:.970 in mm MF AGRICULTURAL 6/66 (VK8/VK86) 6/66 (VK0) 660 (VK8) 670 (VK8) 680 (VK8) 67 (VK8) 680 (VK8) 67/77 (VK87/VK0) 67/77 (VK06) 680/780 (VK07) 76 (VK86/VK0) M ccormick Wheeled Tractors (VK 7779 to 7787) ) Engine O/H ) Basic Engine ) POK69 ) PBK69 ) Front Seal ) Rear Seal ) P8F6 ) P8F70 ) PZZ90 () PZZ908 () Piston-Liner PCK06 a) PP00 b) PUPRK000 c) PX06 6 Per Engine of 7 Pairs of 6 Pairs of Pairs ) Top Gasket ) Bottom Gasket ) PULT09 ) PULB07 () ) P68E0 Main Bearing PUMB000 PUMB000A.00 PUMB000B.00 PUMB000C.00 ) Bush, Con Rod ) Bolt, Con Rod ) Crankshaft ) Head Gasket ) Con Rod ) PA00 X6 ) PV00 X ) PC () () PUME00 PUME00A.00 PUME00B.00 PUME00C.00 Thrust Washer P7/6 ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Exhaust Valve ) Seal, Intake Valve ) P X ) P6 ) P07 ) P8M0 X6 ) P8M06 X6 Valve Train PVTK60 ) Valve, Intake ) Valve, Exhaust ) PL08 X6 ) PD0 X6 ) Guide, Valve a) Intake b) Exhaust a) PA0 X6 b) P8A70 X6 ) Spring, Valve Inner & Outer ) P7P09 X ) Lock, Valve ) PW00 X Oil Pump Lift Pump Water Pump PF067 PULPK006 PUMW096 () To ESN U090J. () From ESN U090J. () For ESN prior to U090J use PUME000. () For Builds (VK7779 to VK7787) use ULB070. () Grade J, Color Coded Green. For Additional PERKINS Products Refer to Page P88 P87

230 Miscellaneous Parts Available from Maxiforce Part Number Description Engines P006 Starter Ring Gear Teeth All P006 Starter Ring Gear Teeth All P690 Top Gasket V8.0 P908 Piston V8.0 P6990A Gasket, Rocker Cover 6. (Oliver Tractor) PA0 Bearing, Balancer Unit.6/000 Series PA0 Bearing, Balancer Unit.6/000 Series P78 Bearing, Balancer Unit.6/.8 P78 Bearing, Balancer Unit.6/.8 P Bushing, Idler Gear 6. P6 Starter Ring Gear 6 Teeth All P66 Gear, Balancer Unit.6/.8 P6 Gear, Balancer Unit.6/.8 P7 Gear, Crankshaft 6. Series () P776 Shaft, Balancer Unit.6/.8 P768 Gear, Crankshaft 6. Series () P79 Gear, Camshaft 6. P7C07 Gear, Balancer Unit.6/000 Series P86 Cylinder Liner V8.0 P8 Exhaust Valve V8.0 P8 Intake Valve V8.0 P77 Shaft, Balancer Unit.6/.8 P8 Insert, Valve Seat, Exhaust D./D.0/.0. P Insert, Valve Seat 6. P Insert, Valve Seat G.6/C.6/T.6 P Insert, Valve Seat, Exhaust 6../6../T6.. P Insert, Valve Seat, Intake 6../6../T6.. P6 Hub, Idler Upper 6. P0 Valve Guide V8.0 P688 Gasket, Rocker Cover 6./T6. P006 Gear, Idler Upper 6. Series () P007 Gear, Idler Lower 6. Series () P06 Gear, Idler Upper 6. Series () P07 Gear, Idler Lower 6. Series () P87 Ring V8.0 P7077 Relief Valve, Oil Pressure.6 P7 Relief Valve, Oil Pressure 6../6../T6../TC6.. P78 Relief Valve, Oil Pressure 6.. P79 Relief Valve, Oil Pressure 6.. P79 Relief Valve, Oil Pressure T6.. P79 Relief Valve, Oil Pressure 6.. PULB007 Bottom Gasket V8.0 PUMK007 Cylinder, V8.0 () Use on Original and Early Style Crankshaft. () Use on Later Style Crankshaft Prefixed ZZ. () For Early Blocks. () For Late Blocks Prefixed ZZ. P88 TEL , , FAX 0.9.0

231 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR PERKINS DIESEL ENGINES Torque Information ENGINE MODEL CRANKSHAFT CONROD TIMING GEARS CAMSHAFT Lb / Ft Lb / Ft Lb / Ft Lb / Ft., D., G ,.0., D.0.,.6, C.6, G.6,.8, () 9 () 0 0 T , T6., () 6.., T6.. 9 () 00 9 () () 0 () 6 () , , 0, Step Tighten to 70 Step Tighten to Step Tighten to 0 () Early Engines Have Different Torque Specifications. () 7/6 Nuts. () / Nuts. () /8 Heavy Duty Nuts. Perkins is the registered trademark of Perkins Engines Ltd. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IP

232

233 MODEL ASPIRATION ENGINE SERIAL PAGE NUMBER NUMBER 0 Naturally Aspirated B0 0 Naturally Aspirated B0 0 Turbocharged B0 6 Naturally Aspirated PC-UP B0 6 Naturally Aspirated 7BC-UP B0 6 Turbocharged PC-UP B0 6 Turbocharged 7BC-UP B0 0 Naturally Aspirated 6FK-UP B06 0 Turbocharged 6FK-UP B07 0 Turbocharged 7BJ-UP B08 0 Turbocharged 7BJ-UP B09 0 * Turbocharged or Naturally Aspirated YS-98 B0 0 * Turbocharged or Naturally Aspirated YS99-UP B 0B * Naturally Aspirated MF-0869 B 0B * Naturally Aspirated MF0870-UP B 0C/E Naturally Aspirated -UP B 0C/E 0C/E 0C/E 0C/E 0C/E E 06E Introduction to Caterpillar Section Engine models covered by this User's Guide Naturally Aspirated Turbocharged Turbocharged Naturally Aspirated Turbocharged Naturally Aspirated Turbocharged Turbocharged or Naturally Aspirated Turbocharged or Naturally Aspirated Turbocharged Turbocharged * Industrial and vehicular applications. CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES -UP -UP -UP -UP -UP ML-UP ML-UP 7MS-098 7MS099-UP CPT-8 CPT8-UP B B6 B7 B8 B9 B0 B B B B B Maxiforce Engine Composition for Caterpillar Applications BOK: Engine Overhaul s Include: Cylinder kits, main and con rod bearing sets, thrust washer sets, front and rear seals, top and bottom gasket sets, conrod bushings, bolts and nuts, cam bushing and valve train kit. BBK: Basic Engine s Include: All components in the overhaul kit with the exception of the valve train kit. BVTK: Valve Train s Include: All valves, springs, guides, keepers and stem seals (Where Offered). Crankshaft s Include: The crankshaft, main and con rod bearings and thrust washer sets. NB: Should engine kits be required without engine bearings and thrust washers, please specify by adding the NB suffix on kit part number. i.e: BOK NB. WEB SITE: IB0

234 Caterpillar Engine Arrangements covered by this Catalog ENGINE PAGE ARRANGEMENT NUMBER B B B B B B B B B B B B0 0-6 B0 0-6 B B B0 B B0 B B0 B0 B B B B0 B0 B0 B0 B0 B0 B0 B0 B0 B0 B B0 B B B B B B B B B ENGINE ARRANGEMENT PAGE NUMBER B B B B B B B B B B B B 9-00 B B B B0 B0 B0 B0 B B B B B7 B7 B7 B7 B B B B B7 B B B B B B B B B B B B B ENGINE ARRANGEMENT PAGE NUMBER B6 B B B B6 B6 B0 B0 B0 B B0 B6 B6 B6 B0 B B6 B B6 B6 B6 B6 B6 B6 B6 B6 B0 B6 B0 B8 B9 B B0 B B0 B B6 B6 B6 B6 B B B B6 B IB0 Caterpillar and Cat are the registered trademark of Caterpillar, Inc. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. TEL , FAX 0.9.0

235 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES ENGINE ARRANGEMENT W-9777 W I- 6I-6 6I-7 6I-8 6I-9 6I-0 6I- 6I- 6I- 6I- 7C-607 7C E-770 7E-99 7E-960 7W-8998 Caterpillar Engine Arrangements covered by this Catalog PAGE NUMBER B6 B B B6 B6 B B6 B6 B6 B B6 B6 B6 B6 B6 B6 B9 B9 B B 97-0 B 0-0 B 0-0 B B6 0-6 B0-7 B9 B0 B0 B06 B07 B0 B B B06 B07 B0 B B B0 B0 B06 B07 B07 B0 WEB SITE: IB0

236 Application CATERPILLAR 0 NATURALLY ASPIRATED Cyl Bore:. in 8.00 mm ) Engine O/H ) Basic Engine ) BOK BOK6 0.0 ) BBK BBK6 0.0 a a) Piston b) Ring b a) B97-0 B97-0B 0.0 b) B-09 B-09B 0.0 Per Engine Main Bearing B B B of Pairs B ) B- B B of Pairs of Pcs ) Thrust Washer ) Crank Bushing ) B9-96 B B Stroke:.9 in mm Displacement: 9 in.96 Liter ) Front Seal ) Rear Seal ) O/H Gasket ) Cylinder Head Gasket ) Oil Pan Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Tappet ) Seal, Valve Intake ) Seal, Valve Exhaust ) B-67 ) B6-697 ) B-8078 ) B8-87 () ) B-60 ) B-0869 X ) B-0870 X6 ) B-087 X6 ) B ) B-9 ) B-9 X ) B- X Valve Train ) Valve, Intake ) Valve, Exhaust ) Spring, Valve ) Lock, Valve BVTK9 ) B6-698 X ) B X ) B-8 X6 ) B-6 X Water Pump Oil Pump Thermostat Repair Sleeve B-00 B97-00 B9- B0RS ().mm Thickness. B0 For Additional CATERPILLAR Products Refer to Page B6

237 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0 C. NATURALLY ASPIRATED Cyl Bore:. in 8.00 mm a b ) Engine O/H a) Piston Main Bearing ) Thrust Washer b) Ring ) Crank Bushing ) Basic Engine a) B B-0 B ) B-0/ B97-080B 0.0 B B ) BOK6 of Pcs B B BOK7 0.0 b) B-09 ) B9-96 B-09B 0.0 ) BBK6 B BBK7 0.0 Per Engine of Pairs of Pairs B Stroke:.9 in mm Displacement: in.6 Liter ENGINE ARRANGEMENT ) Front Seal ) O/H Gasket ) Rear Seal ) Cylinder Head Gasket ) Seal Rocker ) Seal, Cyl Head Cover ) Oil Pan Gasket ) B-67 ) B-078 ) B ) B-68 ) B7-7 ) B-069 ) B-60 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) B-0869 X ) B-0870 X8 ) B-087 X8 ) B-0867 ) Tappet ) Seal, Valve Intake ) Seal, Valve Exhaust ) B-9 ) B-9 X ) B- X Valve Train ) Valve, Intake ) Valve, Exhaust ) Spring, Valve ) Lock, Valve BVTK8 ) B-0888 X ) B-0889 X ) B-8 X8 ) B-6 X6 Water Pump Oil Pump Thermostat Repair Sleeve B-00 B97-00 B9- B0RS For Additional CATERPILLAR Products Refer to Page B6 B0

238 Application CATERPILLAR 0 C.T Cyl TURBOCHARGED Bore:. in 8.00 mm Stroke:.9 in mm ) Engine O/H ) Basic Engine ) BOK8 BOK9 0.0 ) BBK8 BBK9 0.0 a a) Piston b) Ring b a) B B B 0.0 b) B B B 0.0 Per Engine Main Bearing ) Thrust Washer ) Crank Bushing B-0 B ) B-0/ B B of Pairs B B of Pairs of Pcs ) B9-96 B B Displacement: in.6 Liter ENGINE ARRANGEMENT 0-6 ) Front Seal ) Rear Seal ) O/H Gasket ) Cylinder Head Gasket ) Seal Rocker ) Seal, Cyl Head Cover ) Oil Pan Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Tappet ) Seal, Valve Intake ) Seal, Valve Exhaust ) B-67 ) B-078 ) B0TOG ) B-68 ) B7-7 ) B-069 ) B-60 ) B-0869 X ) B-0870 X8 ) B-087 X8 ) B-0867 ) B-9 ) B-9 X ) B- X Valve Train ) Valve, Intake ) Valve, Exhaust ) Spring, Valve ) Lock, Valve BVTK8 ) B-0888 X ) B-0889 X ) B-8 X8 ) B-6 X6 Water Pump Oil Pump Thermostat Repair Sleeve B-00 B97-00 B9- B0RS B0 For Additional CATERPILLAR Products Refer to Page B6

239 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 6/6 BACKHOES NATURALLY ASPIRATED Bore:.877 in mm MODEL 6 ESN PC - UP MODEL 6 ESN 7BC - UP ENGINE ARRANGEMENT W C-607 W-9778 ) Engine O/H ) Basic Engine ) BOK00 ) BBK00 ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) BW-60 ) B7C-8 Piston-Liner BCK89 a) BW-89 b) B7W-77 c) B7C-8 ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Head Gasket ) Oil Pan Gasket ) BP-777 ) B7C-80 ) BP-676 ) B7C-80 ) B0-996 Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) B X ) B X8 ) B7W-0 X8 ) B BP-99 BP BP BP ) B06-80 X ) B8-0 ) B Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) Bushing, Cam ) Tappet ) Push Rod ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) B ) B7C-87 ) BW-9 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 BVTK0 ) BW-6988 X ) B7W- X a) B60-6 X b) B60-8 X a) B X8 b) B X8 ) B X6 6) BW-89 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug B B7C-798 ) B7E-99 ) BW-806 ) B ) B0-7 ) B0-8 ) B7C-88 ) B0-809 For Additional CATERPILLAR Products Refer to Page B6 B0

240 Application CATERPILLAR 6/6 Bore: BACKHOES TURBOCHARGED.877 in mm MODEL 6 ESN PC - UP MODEL 6 ESN 7BC - UP ENGINE ARRANGEMENT 7W C-6076 ) Engine O/H ) Basic Engine ) BOK0 ) BBK0 ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) BW-60 ) B7C-8 Piston-Liner BCK07 a) B6-607 b) B7W- c) B7C-8 ) Top Gasket ) Bottom Gasket ) Valve Cover Gsk ) Head Gasket ) Oil Pan Gasket ) BTG-06 ) B7C-80 ) BP-676 ) BCH-06 ) B0-996 Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) B7W-0 X ) B X8 ) B7W-0 X8 ) B7W- BP-99 BP BP BP ) Bushing, Cam ) Tappet ) Push Rod ) B06-80 X ) B8-0 ) B Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) Crankshaft Gear ) Camshaft Gear ) Idler Gear ) B ) B7C-87 ) BW-9 Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 BVTK0 ) BW-6988 X ) B7W- X a) B60-6 X b) B60-8 X a) B X8 b) B X8 ) B X6 6) BW-89 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH ) Cylinder Head (With Valves) ) Glowplug B B7C-798 ) B7E-99 ) BW-806 ) B ) B0-7 ) B0-8 ) B7C-88 ) B0-809 B0 For Additional CATERPILLAR Products Refer to Page B6

241 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0 INDUSTRIAL ENGINE NATURALLY ASPIRATED Cyl Bore:.97 in mm ) Engine O/H ) Basic Engine ) BOK0 ) BBK0 Piston-Liner BCK6 a) B-06 b) B6-780 c) B6I-06 () Main Bearing B B B B BP-99 Thrust Washer Per Engine of Pairs of Pairs of Pairs BP BP BP B0-9090/9 B /7.007 ESN 6FK-UP a ENGINE ARRANGEMENT 6I- 6I-0 7E b ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) BW-9 a) BW-60 () b) B09-98 () ) B7C-8 ) B77-0 ) B7-976 ) B6-667 ) B60-06 ) B0-996 ) B X ) B X8 ) B7W-0 X8 ) B ) B06-80 X ) B-90 ) B8-0 ) B Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 BVTK ) B6I-08 X ) B7W-60 X a) B60-6 X b) B60-8 X a) B6I-08 X8 b) B6I-08 X8 ) B X6 6) BW-89 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH B6I-0 B ) B-8 ) BW-806 ) B ) B0-7 ) B0-8 () Flanged Fully Finished Liner. Semi Finished Liner available B6I-06UF. () To ESN: 6FK000. () From ESN: 6FK00. For Additional CATERPILLAR Products Refer to Page B6 B06

242 Application CATERPILLAR 0 INDUSTRIAL ENGINE Cyl TURBOCHARGED Bore:.97 in 00.0 mm ESN 6FK - UP ENGINE ARRANGEMENT 6I-6 6I- 7E-99 7E ) Engine O/H ) Basic Engine 0 ) BOK0/ 0 BOK0/0 ) BBK0 a ) Front Seal ) Rear Seal b ) Crankshaft ) BW-9 a) BW-60 () b) B09-98 () ) BP-998 Piston-Liner BCK a) B07- b) B-700 c) B6I-06 () ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B77-0 ) B7-976 ) B6-667 ) B60-06 ) B0-996 Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod BP-99 BP BP BP Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) Con Rod ) B7W-0 X ) B X8 ) B7W-0 X8 ) B7W- ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) B06-80 X ) B-90 ) B8-0 ) B Valve Train a) b) 0 ) Valve, Intake a) b) 0 ) Valve, Exhaust a) B6I-96 X b) B00-66 X ) B7W-60 X a) BVTK b) BVTK6 ) Guide, Valve a) Intake b) Exhaust a) B60-6 X b) B60-8 X ) Spring, Valve a) Inner b) Outer a) B6I-08 X8 b) B6I-08 X8 ) Lock, Valve 6) Seal, Valve ) B X6 6) BW-89 X8 / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH B6I-09 B ) B-8 ) BW-806 ) B ) B0-7 ) B0-8 () Flanged Fully Finished Liner. Semi Finished Liner available B6I-06UF. () To ESN: 6FK000. () From ESN: 6FK0. B07 For Additional CATERPILLAR Products Refer to Page B6

243 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0 Used in CAT Wheel Loader Model 9G / ITG Cyl Bore:.97 in mm Stroke:.00 in 7.00 mm Displacement: 6 in 6 Liter PISTON GRADE K (m) J8 ENGINE ARRANGEMENT ) Engine O/H ) Basic Engine ) BOK8 ) BBK8 ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) BW-60 ) B9-708 Piston-Liner BCK8 a) B-8 b) B-700 c) B-8 () ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B77-0 ) B7-976 ) B6-667 ) B60-06 ) B0-996 Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod ) Dowel, Con Rod ) Con Rod ) B- X ) B- X8 ) B- X8 ) B-0 BP-99 Thrust Washer Per Engine of Pairs of Pairs of Pairs BP BP BP B0-9090/9 B /7.007 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) B06-80 X ) B-90 ) B8-0 ) B Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 BVTK6 ) B00-66 X ) B7W-60 X a) B60-6 X b) B60-8 X a) B6I-08 X8 b) B6I-08 X8 ) B X6 6) BW-89 X8 / Oil Pump Lift Pump Water Pump ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH B6I-09 B B-8 ) B ) B0-7 ) B0-8 () Flanged Fully Finished Liner. Semi Finished Liner available B-8UF. () To ESN: 6FK000. () From ESN: 6FK00. For Additional CATERPILLAR Products Refer to Page B6 B08

244 Application CATERPILLAR 0 Used in CAT Wheel Loader Model 9G / ITG Cyl Bore:.97 in mm Stroke:.00 in 7.00 mm Displacement: 6 in 6 Liter PISTON GRADE L (m) J86 ENGINE ARRANGEMENT ) Engine O/H ) Basic Engine ) BOK9 ) BBK9 ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) BW-60 ) B9-708 Piston-Liner BCK9 a) B-9 b) B-700 c) B-8 () ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B77-0 ) B7-976 ) B6-667 ) B60-06 ) B0-996 Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod ) Dowel, Con Rod BP-99 BP BP BP Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) Con Rod ) B- X ) B- X8 ) B- X8 ) B-0 ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) B06-80 X ) B-90 ) B8-0 ) B Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 BVTK6 ) B00-66 X ) B7W-60 X a) B60-6 X b) B60-8 X a) B6I-08 X8 b) B6I-08 X8 ) B X6 6) BW-89 X8 / Oil Pump Lift Pump Water Pump ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH B6I-09 B B-8 ) B ) B0-7 ) B0-8 () Flanged Fully Finished Liner. Semi Finished Liner available B-8UF. () To ESN: 6FK000. () From ESN: 6FK0. B09 For Additional CATERPILLAR Products Refer to Page B6

245 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0 INDUSTRIAL ENGINE TURBOCHARGED or NATURALLY ASPIRATED Cyl Bore:.97 in mm ESN YS - 98 ENGINE ARRANGEMENT - CORE ) Engine O/H ) Basic Engine 0 ) BOK0/ 0 BOK0/0 ) BBK0 a ) Front Seal ) Rear Seal b ) Crankshaft ) BW-9 a) BW-60 () b) B09-98 () ) BP-998 Piston-Liner BCK90 a) B-90 b) B8-07 c) B-8 () ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod BP-99 BP BP BP Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) B7- ) B ) B00-67 ) B60-06 ) B0-996 ) B8-08 X ) B X8 ) B7W-0 X8 ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B06-80 X ) B8-0 ) B ) B-686 X ) B-688 X Valve Train 0 0 a) b) 0 a) BVTK b) BVTK ) Valve, Intake ) Valve, Exhaust 0 0 a) b) 0 a) B8-0 X b) B-68 X a) B8-00 X b) B-687 X ) Guide, Valve a) Intake b) Exhaust a) B8-088 X b) B6-96 X ) Spring, Valve ) B06-7 X8 ) Lock, Valve ) B7-979 X6 Oil Pump Lift Pump Water Pump B6I-09 B B9-6 () Flanged Fully Finished Liner. Semi Finished Liner available B-8UF. () To ESN: YS0. () From ESN: YS0. For Additional CATERPILLAR Products Refer to Page B6 B0

246 Application CATERPILLAR 0 INDUSTRIAL ENGINE TURBOCHARGED or NATURALLY ASPIRATED Cyl Bore:.97 in mm ESN YS99 - UP ENGINE ARRANGEMENT - CORE -088 ) Engine O/H ) Basic Engine 0 ) BOK0/ 0 BOK0/0 ) BBK0 a ) Front Seal ) Rear Seal b ) Crankshaft ) BW-9 a) BW-60 () b) B09-98 () ) B-0 Piston-Liner BCK90 a) B-90 b) B8-07 c) B-8 () ) Top Gasket ) Bottom Gasket Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod B-778 B B B Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B7- ) B ) B00-67 ) B60-06 ) B0-996 ) Con Rod ) B-8 X ) B-9 X8 ) B- () ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B06-80 X ) B8-0 ) B ) B-686 X ) B-688 X Valve Train 0 0 a) b) 0 a) BVTK b) BVTK ) Valve, Intake ) Valve, Exhaust 0 0 a) b) 0 a) B8-0 X b) B-68 X a) B8-00 X b) B-687 X ) Guide, Valve a) Intake b) Exhaust a) B8-088 X b) B6-96 X ) Spring, Valve ) B06-7 X8 ) Lock, Valve ) B7-979 X6 Oil Pump Lift Pump Water Pump B6I-09 B B9-6 () Flanged Fully Finished Liner. Semi Finished Liner available B-8UF. () To ESN: YS0. () From ESN: YS0. () Fracture Split Type. B For Additional CATERPILLAR Products Refer to Page B6

247 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0B INDUSTRIAL ENGINE NATURALLY ASPIRATED Cyl Bore:.0 in 0.00 mm ESN MF ENGINE ARRANGEMENT - CORE ) Engine O/H ) Basic Engine ) BOK06 BOK BOK09.00 ) BBK06 BBK BBK09.00 a b ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 a) BW-60 () b) B09-98 () ) BP-998 a a) Piston b) Ring b a) B8-00 B B b) B8-009 B B ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) B87-90 ) B ) B00-67 ) B8-088 Main Bearing B B B B ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) B8-08 X ) B X8 ) B7W-0 X8 BP-99 BP BP BP Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B06-80 X ) B8-0 ) B ) B-686 X ) B-688 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve ) Lock, Valve BVTK ) B76- X ) B76-7 X a) B8-088 X b) B6-96 X ) B76-9 X8 ) B7-979 X6 Oil Pump Lift Pump Water Pump B6I-0 B B9-6 () To ESN: MF8. () From ESN: MF8. For Additional CATERPILLAR Products Refer to Page B6 B

248 Application CATERPILLAR 0B INDUSTRIAL ENGINE NATURALLY ASPIRATED Cyl Bore:.0 in 0.00 mm ESN MF0870 -UP ) Engine O/H ) Basic Engine ) BOK07 BOK0 0.0 BOK.00 ) BBK07 BBK0 0.0 BBK.00 a b a a) Piston b) Ring b a) B8-00 B B b) B8-009 B B Main Bearing B B B B B-778 B B B Thrust Washer B0-9090/9 B /7.007 Per Engine of Pairs of Pairs of Pairs ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) BW-9 a) BW-60 () b) B09-98 () ) B-0 ) B87-90 ) B ) B00-67 ) B8-088 ) B-8 X ) B-9 X8 ) B- () ) B06-80 X ) B8-0 ) B ) B-686 X ) B-688 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve ) Lock, Valve BVTK ) B76- X ) B76-7 X a) B8-088 X b) B6-96 X ) B76-9 X8 ) B7-979 X6 Oil Pump Lift Pump Water Pump B6I-0 B B9-6 () To ESN: MF8. () From ESN: MF8. () Fracture Split Type; Grade J. B For Additional CATERPILLAR Products Refer to Page B6

249 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0C/E INDUSTRIAL ENGINE NATURALLY ASPIRATED Cyl Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ESN -UP ) Engine O/H a) Piston & Ring b) Ring Main Bearing ) Basic Engine a) B-7 B-777 B B B B Per Engine B ) BOK BOK 0.0 BOK.00 ) BBK BBK 0.0 BBK.00 a b b) B-7 B-7B 0.0 B-7D.00 B-778 B B B Thrust Washer B0-9090/9 B /7.007 of Pairs of Pairs of Pairs ENGINE ARRANGEMENT ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) B-79 ) B-700 ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B76-0 ) B-0 ) B-6 ) B0-79 ) B-600 ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) B-8 X ) B-9 X8 ) B- () ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B-70 X ) B8-0 ) B ) B-68 X ) B-9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve BVTK7 ) B-9 X ) B-99 X B8-088 X8 ) B-96 X8 ) B7-979 X6 Oil Pump Fuel Priming Pump ) Water Pump ) Gasket B-89 () B8-886 ) B-806 ) B-809 () Not to be used on Engines with Balancer Units. () Grade J. For Additional CATERPILLAR Products Refer to Page B6 B

250 Application CATERPILLAR 0C/E Displacement: 69 in. Liter ESN -UP ENGINE ARRANGEMENT ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) B-79 ) B-700 a b INDUSTRIAL ENGINE ) Engine O/H a) Piston & Ring Main Bearing Thrust Washer b) Ring NATURALLY ASPIRATED ) Basic Engine a) B-7 B-777 B-778 B0-9090/9 B B /7.007 B B Cyl ) BOK B BOK6 0.0 B B Per Engine BOK7.00 B B Bore:. in ) BBK b) B mm BBK6 0.0 B-7B 0.0 BBK7.00 B-7D.00 of Pairs of Pairs of Pairs Stroke:.00 in 7.00 mm ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B76-0 ) B7-9 ) B-6 ) B0-79 ) B7-9 ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) B-8 X ) B-9 X8 ) B- () ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B-70 X ) B8-0 ) B ) B-68 X ) B-9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve BVTK7 ) B-9 X ) B-99 X B8-088 X8 ) B-96 X8 ) B7-979 X6 Oil Pump Fuel Priming Pump ) Water Pump ) Gasket B-89 () B8-886 ) B-806 ) B-809 () Not to be used on Engines with Balancer Units. () Grade J. B For Additional CATERPILLAR Products Refer to Page B6

251 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0C/E INDUSTRIAL ENGINE TURBOCHARGED Cyl Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ESN - UP ENGINE ARRANGEMENT ) Engine O/H a) Piston & Ring b) Ring Main Bearing ) Basic Engine a) B-7 B-777 B B B B Per Engine B ) BOK8 BOK9 0.0 BOK0.00 ) BBK8 BBK9 0.0 BBK0.00 ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) B-79 ) B-700 Valve Train BVTK7 a b b) B-6 B-6B 0.0 B-6D.00 ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B76-0 ) B-0 ) B-6 ) B0-79 ) B-600 ) Valve, Intake ) Valve, Exhaust ) B-9 X ) B-99 X ) Bush, Con Rod ) Bolt, Con Rod ) Guide, Valve (Intake & Exhaust) B8-088 X8 B-778 B B B ) B-8 X ) B-9 X8 ) B- () Thrust Washer B0-9090/9 B /7.007 of Pairs of Pairs of Pairs ) Con Rod ) Spring, Valve ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B-70 X ) B8-0 ) B ) B-68 X ) B-9 X ) Lock, Valve ) B-96 X8 ) B7-979 X6 Oil Pump Fuel Priming Pump ) Water Pump ) Gasket B-89 () B8-886 ) B-806 ) B-809 () Not to be used on Engines with Balancer Units. () Grade J. For Additional CATERPILLAR Products Refer to Page B6 B6

252 Application CATERPILLAR 0C/E INDUSTRIAL ENGINE TURBOCHARGED Cyl Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ESN -UP ENGINE ARRANGEMENT ) Engine O/H a) Piston & Ring b) Ring Main Bearing ) Basic Engine a) B-7 B-777 B B B B Per Engine B ) BOK BOK 0.0 BOK.00 ) BBK BBK 0.0 BBK.00 ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) B-79 ) B-700 a b b) B-6 B-6B 0.0 B-6D.00 ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B76-0 ) B7-9 ) B-6 ) B0-79 ) B7-9 ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod B-778 B B B ) B-8 X ) B-9 X8 ) B- () Thrust Washer B0-9090/9 B /7.007 of Pairs of Pairs of Pairs ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B-70 X ) B8-0 ) B ) B-68 X ) B-9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve BVTK7 ) B-9 X ) B-99 X B8-088 X8 ) B-96 X8 ) B7-979 X6 Oil Pump Fuel Priming Pump ) Water Pump ) Gasket B-89 () B8-886 ) B-806 ) B-809 () Not to be used on Engines with Balancer Units. () Grade J. B7 For Additional CATERPILLAR Products Refer to Page B6

253 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 0C/E INDUSTRIAL ENGINE NATURALLY ASPIRATED Cyl Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ) Engine O/H a) Piston & Ring b) Ring Main Bearing ) Basic Engine a) B-7 B-777 B B88-99 B B Per Engine B ) BOK0 BOK 0.0 BOK.00 ) BBK0 BBK 0.0 BBK.00 a b b) B-7 B-7B 0.0 B-7D.00 B-778 B B B Thrust Washer B0-9090/9 B /7.007 of Pairs of Pairs of Pairs ENGINE ARRANGEMENT ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust -08 ) BW-9 ) B-79 ) B-700 ) B76-0 ) B7- ) B-6 ) B0-79 ) B-600 ) B-8 X ) B-9 X8 ) B- () ) B-70 X ) B8-0 ) B ) B-68 X ) B-9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve BVTK7 ) B-9 X ) B-99 X B8-088 X8 ) B-96 X8 ) B7-979 X6 Oil Pump Fuel Priming Pump ) Water Pump ) Gasket B-89 () B8-886 ) B-806 ) B-809 () Not to be used on Engines with Balancer Units. () Grade J. For Additional CATERPILLAR Products Refer to Page B6 B8

254 Application CATERPILLAR 0C/E INDUSTRIAL ENGINE TURBOCHARGED Cyl Bore:. in 0.00 mm Stroke:.00 in 7.00 mm Displacement: 69 in. Liter ) Engine O/H a) Piston & Ring b) Ring Main Bearing ) Basic Engine a) B-7 B-777 B B88-9 B B Per Engine B ) BOK BOK 0.0 BOK.00 ) BBK BBK 0.0 BBK.00 a b b) B-6 B-6B 0.0 B-6D.00 B-778 B B B Thrust Washer B0-9090/9 B /7.007 of Pairs of Pairs of Pairs ENGINE ARRANGEMENT ) Front Seal ) Rear Seal ) Crankshaft ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) BW-9 ) B-79 ) B-700 ) B76-0 ) B7- ) B-6 ) B0-79 ) B-600 ) B-8 X ) B-9 X8 ) B- () ) B-70 X ) B8-0 ) B ) B-68 X ) B-9 X Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve (Intake & Exhaust) ) Spring, Valve ) Lock, Valve BVTK7 ) B-9 X ) B-99 X B8-088 X8 ) B-96 X8 ) B7-979 X6 Oil Pump Fuel Priming Pump ) Water Pump ) Gasket B-89 () B8-886 ) B-806 ) B-809 () Not to be used on Engines with Balancer Units. () Grade J. B9 For Additional CATERPILLAR Products Refer to Page B6

255 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 06 INDUSTRIAL ENGINE NATURALLY ASPIRATED 6 Cyl Bore:.97 in 00.0 mm ESN ML-UP ENGINE ARRANGEMENT - CORE 6I-7 6I ) Engine O/H ) Basic Engine ) BOK700 ) BBK700 ) Front Seal ) Rear Seal ) Crankshaft Piston-Liner BCK6 a) B-06 b) B6-780 c) B6I-06 () ) Top Gasket ) Bottom Gasket ) Head Gasket Main Bearing B7W-89 B7W B7W-9.00 B7W-9.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod Thrust Washer B7W-86 B0-9090/9 B7W B /7.007 B7W B7W Per Engine of 7 Pairs of 6 Pairs of Pairs ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) BW-9 ) BW-60 ) B9-09 ) B0-008 ) B ) B6I-87 ) B X6 ) B X ) B7W-0 X ) B ) B06-80 X ) B6I- ) B8-0 ) B Valve Train ) Valve, Intake ) Valve, Exhaust ) Guide, Valve a) Intake b) Exhaust ) Spring, Valve a) Inner b) Outer ) Lock, Valve 6) Seal, Valve 6 BVTK70 ) B6I-08 X6 ) B7W-60 X6 a) B60-6 X6 b) B60-8 X6 a) B6I-08 X b) B6I-08 X ) B X 6) BW-89 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH B00-77 B-97 ) B9-09 ) BW-806 ) N/A ) B0-7 ) B0-8 () Flanged Fully Finished Liner. Semi Finished Liner available B6I-06UF. For Additional CATERPILLAR Products Refer to Page B6 B0

256 Application CATERPILLAR 06 INDUSTRIAL ENGINE 6 Cyl TURBOCHARGED Bore:.97 in 00.0 mm ESN ML-UP ENGINE ARRANGEMENT - CORE 6I-8 6I-9 6I- 6I ) Engine O/H ) Basic Engine 0 ) BOK70/ 0 BOK70/0 ) BBK70 ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 ) BW-60 ) B9-09 Piston-Liner BCK a) B07- b) B-700 c) B6I-06 () ) Top Gasket ) Bottom Gasket ) Head Gasket Main Bearing B7W-89 B7W B7W-9.00 B7W-9.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod ) Con Rod Thrust Washer B7W-86 B0-9090/9 B7W B /7.007 B7W B7W Per Engine of 7 Pairs of 6 Pairs of Pairs ) B0-008 ) B ) B6I-87 ) B7W-0 X6 ) B X ) B7W-0 X ) B7W- ) Bushing, Cam ) Camshaft ) Tappet ) Push Rod ) B06-80 X ) B6I- ) B8-0 ) B Valve Train a) b) 0 ) Valve, Intake a) b) 0 ) Valve, Exhaust a) B6I-96 X6 b) B00-66 X6 ) B7W-60 X a) BVTK7 b) BVTK7 ) Guide, Valve a) Intake b) Exhaust a) B60-6 X6 b) B60-8 X6 ) Spring, Valve a) Inner b) Outer a) B6I-08 X b) B6I-08 X ) Lock, Valve 6) Seal, Valve ) B X 6) BW-89 X / Oil Pump Lift Pump ) Water Pump ) Thermostat ) Rocker Shaft ) Rocker Arm LH ) Rocker Arm RH B00-77 B-97 ) B9-09 ) BW-806 ) N/A ) B0-7 ) B0-8 B For Additional CATERPILLAR Products Refer to Page B6

257 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 06 INDUSTRIAL ENGINE TURBOCHARGED or NATURALLY ASPIRATED 6 Cyl Bore:.97 in mm ESN 7MS ENGINE ARRANGEMENT - CORE G Wheeled Loader ) Engine O/H ) Basic Engine 0 ) BOK70/ 0 BOK70/0 ) BBK70 a ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 a) BW-60 () b) B09-98 () ) B9-09 Piston-Liner BCK90 a) B-90 b) B8-07 c) B-8 () b ) Top Gasket ) Bottom Gasket ) Head Gasket Main Bearing B7W-89 B7W B7W-9.00 B7W-9.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod B7W-86 B7W B7W B7W Thrust Washer B0-9090/9 B / Per Engine of 7 Pairs of 6 Pairs of Pairs ) B87-96 ) B-07 ) B6I-87 ) B8-08 X6 ) B X ) B7W-0 X ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B06-80 X ) B8-0 ) B ) B-686 X6 ) B-688 X6 Valve Train 0 0 a) b) 0 a) BVTK7 b) BVTK7 ) Valve, Intake ) Valve, Exhaust 0 0 a) b) 0 a) B8-0 X6 b) B-68 X6 a) B8-00 X6 b) B-687 X6 ) Guide, Valve a) Intake b) Exhaust a) B8-088 X6 b) B6-96 X6 ) Spring, Valve ) B06-7 X ) Lock, Valve ) B7-979 X Oil Pump Lift Pump ) Water Pump ) Thermostat B00-77 B-97 ) B9-6 ) BW-806 () Flanged Fully Finished Liner. Semi Finished Liner available B-8UF. () To ESN: 7MS8. () From ESN: 7MS86. For Additional CATERPILLAR Products Refer to Page B6 B

258 Application CATERPILLAR 06 INDUSTRIAL ENGINE TURBOCHARGED or NATURALLY ASPIRATED 6 Cyl Bore:.97 in mm ESN 7MS099 - UP ENGINE ARRANGEMENT - CORE ) Engine O/H ) Basic Engine 0 ) BOK70/ 0 BOK70/0 ) BBK70 a Piston-Liner BCK90 a) B-90 b) B8-07 c) B-8 () Main Bearing B7W-89 b B7W B7W-9.00 B7W-9.00 Thrust Washer B6-97 B0-9090/9 B6-97A.00 B6-97B.00 B6-97C.00 B / Per Engine of 7 Pairs of 6 Pairs of Pairs G Wheeled Loader ) Front Seal ) Rear Seal ) Crankshaft ) BW-9 a) BW-60 () b) B09-98 () ) B9-09 ) Top Gasket ) Bottom Gasket ) Head Gasket ) B87-96 ) B-07 ) B6I-87 ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) B-8 X6 ) B-9 X ) B- () ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B06-80 X ) B8-0 ) B ) B-686 X6 ) B-688 X6 Valve Train 0 0 a) b) 0 a) BVTK7 b) BVTK7 ) Valve, Intake ) Valve, Exhaust 0 0 a) b) 0 a) B8-0 X6 b) B-68 X6 a) B8-00 X6 b) B-687 X6 ) Guide, Valve a) Intake b) Exhaust a) B8-088 X6 b) B6-96 X6 ) Spring, Valve ) B06-7 X ) Lock, Valve ) B7-979 X Oil Pump Lift Pump ) Water Pump ) Thermostat B00-77 B-97 ) B9-6 ) BW-806 () Flanged Fully Finished Liner. Semi Finished Liner available B-8UF. () To ESN: 7MS8. () From ESN: 7MS86. () Grade J; Fracture Split Type ESN 7MS099-UP. B For Additional CATERPILLAR Products Refer to Page B6

259 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Application CATERPILLAR 06E INDUSTRIAL ENGINE 6 Cyl Bore: TURBOCHARGED.97 in mm Stroke:.00 in 7.00 mm Compression Ratio: 7.: ESN CPT - 8 ENGINE ARRANGEMENT G Wheeled Loader CS8E Vibratory Compactor ) Engine O/H ) Basic Engine ) BOK70 ) BBK70 ) Front Seal ) Rear Seal ) BW-9 ) B09-98 Valve Train BVTK7 Piston-Liner BCK a) B6-8 b) B7-7 c) B-8 ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) Valve, Intake ) Valve, Exhaust Main Bearing B7W-89 B7W B7W-9.00 B7W-9.00 ) Bush, Con Rod ) Bolt, Con Rod ) Nut, Con Rod B7W-86 ) Spring, Valve B7W B7W B7W Thrust Washer B0-9090/9 B / Per Engine of 7 Pairs of 6 Pairs of Pairs ) B6-96 ) B6-690 ) B6-960 ) B0-00 ) B6I-68 ) B-68 X6 ) B8-00 X6 ) Guide, Valve a) Intake b) Exhaust a) B8-088 X6 b) B6-96 X6 ) B8-08 X6 ) B X ) B7W-0 X ) B06-7 X ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B06-80 X ) B8-0 ) B ) B-686 X6 ) B-688 X6 ) Lock, Valve ) B7-979 X Oil Pump Lift Pump Water Pump B6-86 B6-90 B-60 For Additional CATERPILLAR Products Refer to Page B6 B

260 Application CATERPILLAR 06E INDUSTRIAL ENGINE 6 Cyl Bore: TURBOCHARGED.97 in mm Stroke:.00 in 7.00 mm Compression Ratio: 7.: ESN CPT8 - UP ENGINE ARRANGEMENT G Wheeled Loader CS8E Vibratory Compactor ) Engine O/H ) Basic Engine ) BOK70 ) BBK70 ) Front Seal ) Rear Seal ) BW-9 ) B09-98 Valve Train BVTK7 Piston-Liner BCK a) B6-8 b) B7-7 c) B-8 () ) Top Gasket ) Bottom Gasket ) Valve Cover Gasket ) Head Gasket ) Oil Pan Gasket ) B6-96 ) B6-690 ) B6-960 ) B0-00 ) B6I-68 ) Valve, Intake ) Valve, Exhaust Main Bearing B7W-89 B7W B7W-9.00 B7W-9.00 ) Bush, Con Rod ) Bolt, Con Rod ) Con Rod ) Spring, Valve Thrust Washer B6-97 B0-9090/9 B6-97A.00 B /7.007 B6-97B.00 B6-97C.00 6 Per Engine of 7 Pairs of 6 Pairs of Pairs ) B-68 X6 ) B8-00 X6 ) Guide, Valve a) Intake b) Exhaust a) B8-088 X6 b) B6-96 X6 ) B-8 X6 ) B-9 X ) B- () ) B06-7 X ) Bushing, Cam ) Tappet ) Push Rod ) Seal, Valve Intake ) Seal, Valve Exhaust ) B06-80 X ) B8-0 ) B ) B-686 X6 ) B-688 X6 ) Lock, Valve ) B7-979 X Oil Pump Lift Pump Water Pump B6-86 B6-90 B-60 () Flanged Fully Finished Liner. Semi Finished Liner available B-8UF. () Fracture Split Type; Grade J. B For Additional CATERPILLAR Products Refer to Page B6

261 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR CATERPILLAR DIESEL ENGINES Miscellaneous Parts Available from Maxiforce Part Number Description B Starter Motor Ring Gear (6 Teeth) B7W-67 Starter Motor Ring Gear ( Teeth) B86-7 Starter Motor Ring Gear ( Teeth) B9-90 Turbocharger Gasket B-680 Oil Cooler Housing Gasket B-88 Timing Cover Gasket B-887 Timing Cover Gasket B-86 Exhaust Manifold Gasket B Timing Cover Gasket Caterpillar and Cat are the registered trademark of Caterpillar, Inc. Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. TEL , FAX B6

262 B7 TEL , FAX 0.9.0

263 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR YANMAR DIESEL ENGINES Introduction to Yanmar Section Engine models covered by this User's Guide ENGINE MODEL COMMENTS BORE PAGE TNE8D Equivalent to KOMATSU D8E-FB, FB, & FB 8 mm Y0 TNE8D Equivalent to KOMATSU D8E-FB 8 mm Y0 TNE8T 8 mm Y0 TNE88 88 mm Y0 TNE88 88 mm Y0 TNE06D 06 mm Y06 TNE06T 06 mm Y07 TNV8/T 8 mm Y08 TNV8T 8 mm Y09 TNV8 8 mm Y0 TNV8T 8 mm Y TNV88 88 mm Y TNV88 88 mm Y TNV06D 06 mm Y TNV06T 06 mm Y Maxiforce Engine Composition for Yanmar Applications YOK: Engine Overhaul s Include: All requiered pistons, pins and reatiners, main and con rod bearing sets, thrust washer sets, crankshaft seals, complete overhaul gasket set, and liquid gasket. Yanmar is the registered trademark of Yanmar Diesel Engine Co., Manufacturer's names, numbers, symbols and descriptions are used solely for reference purposes, not implying that any part listed is the product of these manufacturers. Maxiforce is in no way affiliated to any of these manufacturers. WEB SITE: IY0

264 YANMAR Model TNE8D G, GH, GA and KOMATSU D8E-FB D8E-FB D8E-FB Bore:.0 in 8.00 mm Stroke:. in mm Engine O/H YOKTNE8D YOKTNE8D/ ) Front Seal ) Rear Seal ) Crankshaft Piston Y Y See note () below Use ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket Main Bearing ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ConRod Bearing ) Camshaft ) Tappet Thrust Washers Y Y90-60 Y90-09 Y Y Use Use of ) Y ) Y ) Y ) YMGSTNE8 ) Y900-0 ) Y F ) Y90-0 ) Y X ) Y0-00 X6 ) Y979-0 X ) Y ) Y99-80 ) Y90-00 X6 Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve Y X Y900-0 X ) Y X ) Y90-80 X ) Y X ) Y60-0 X ) Y00-0 X Y979-0 X6 Thermostat Oil Pump Y9-980 Y () Rings only to be used with MAXIFORCE PISTONS (ALFIN). () Check your application for proper usage. Lift Pump Y900-0-Z Water Pump ) Y () ) Y () ) Y () Y0 TEL , , FAX 0.9.0

265 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR YANMAR DIESEL ENGINES YANMAR Model TNE8D and KOMATSU Engine O/H YOKTNE8D Piston Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 D8E-FB YOKTNE8D/ Y Y Y See note () below Bore:.0 in 8.00 mm Use Use Use of Stroke:. in mm ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) Y ) Y ) Y ) YMGSTNE8 ) Y ) Y F ) Y90-0 ) Y X ) Y0-00 X8 ) Y979-0 X ) Y ) Y ) Y90-00 X8 Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve Y X Y900-0 X ) Y X ) Y90-80 X ) Y X6 ) Y60-0 X ) Y00-0 X Y979-0 X8 Thermostat Oil Pump Y9-980 Y () Rings only to be used with MAXIFORCE PISTONS (ALFIN). () Check your application for proper usage. Lift Pump Y900-0-Z Water Pump ) Y () ) Y () ) Y () WEB SITE: Y0

266 YANMAR Model TNE8T Engine O/H Piston Main Bearing ConRod Bearing Thrust Washers Bore:.0 in 8.00 mm Stroke:. in mm YOKTNE8T YOKTNE8T/ Y Y See note () below Y Y Y90-60 Y Y90-09 Use Use Use of ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) Y ) Y ) Y ) YMGSTNE8 ) Y ) Y F ) Y90-0 ) Y X ) Y0-00 X8 ) Y979-0 X ) Y ) Y ) Y90-00 X8 Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve Y X Y900-0 X ) Y X ) Y90-80 X ) Y X6 ) Y60-0 X ) Y00-0 X Y979-0 X8 Y0 Thermostat Y9-980 Oil Pump Y () Y () () Rings only to be used with MAXIFORCE PISTONS (ALFIN). () Codes 06 and 006. () Codes 00, 00, 0, and 0. () Check your application for proper usage. Lift Pump Y900-0-Z TEL , , FAX Water Pump ) Y () ) Y () ) Y ()

267 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR YANMAR DIESEL ENGINES YANMAR Model TNE88 a b ACG, ACGD, AGD, AMU, BUE, EGA, Engine O/H YOKTNE88 a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 GIA, GAO, LAN, MC-EK, MC-K, NSR, PG, SA, TB, YC Bore:.6 in mm YOKTNE88/ ) Front Seal ) Rear Seal ) Crankshaft Y Use b) Y Y ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket Y ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod Y Use Use of ) Camshaft ) Tappet ) Y ) Y ) N/A ) YMGSTNE88 ) Y ) Y F ) Y90-0 ) Y X ) ) Y979-0 X ) ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve Y X Y900-0 X ) Y X ) Y90-80 X ) ) ) Y979-0 X6 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () WEB SITE: Y0

268 YANMAR Model TNE88 a b ACG, ACGD, AD, ADEL, AGD, BEN, Engine O/H YOKTNE88 a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 BUE, EACG, EAD, EAD, EADS, ECMC, EFL, EGA, GR, HP, HYS, IKA, LAN, M-EK, MS, NS, NSR, NSW, PG, P, SA, TB, TB Bore:.6 in mm YOKTNE88/ ) Front Seal ) Rear Seal ) Crankshaft ) Y ) Y ) N/A Y Use b) Y Y ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) YMGSTNE88 ) Y ) Y F ) Y90-0 Y ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Y X ) ) Y979-0 X ) Y Use Use of ) Camshaft ) Tappet ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve Y X Y900-0 X ) Y X ) Y90-80 X ) ) ) Y979-0 X8 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () Y0 TEL , , FAX 0.9.0

269 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR YANMAR DIESEL ENGINES YANMAR Model TNE06D a b AMM, G, GA, GE, SA, TB Engine O/H YOKTNE06 a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y Thrust Washers Y YOKTNE06/ Y Y Y Bore:.7 in mm Use b) Y Y Use Use of ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) Y ) Y ) N/A ) Y ) Y ) Y X ) Y X8 ) Y X ) Y ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Lock, Valve ) Stem Seal Int Spring, Valve Y X Y900-0 X Y X ) Y X6 ) Y80-0 X8 Y900-0 X8 Thermostat Oil Pump Lift Pump Water Pump Y Y N/A Y900-0 WEB SITE: Y06

270 YANMAR Model TNE06T GA, ML, NS, SA, TBL Engine O/H YOKTNE06T a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y Thrust Washers Y Bore:.7 in mm YOKTNE06T/ Y See note () below Use Y Y b) Y Y Use Use of ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Head Gasket ) Con Rod ) Camshaft ) Tappet ) Y ) Y ) N/A ) Y ) Y ) Y X ) Y X8 ) Y X ) Y ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Lock, Valve ) Stem Seal Spring, Valve Y X Y900-0 X Y X8 ) Y X6 Y900-0 X8 ) Y80-0 X8 Thermostat Oil Pump Lift Pump Water Pump Y Y N/A ) Y ) Y900-0 () On TNE06T engines, Use for model TNE06T-GA only. Y07 TEL , , FAX 0.9.0

271 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR YANMAR DIESEL ENGINES YANMAR Model TNV8/T a b DUW, DZP0, DZP0, DZP0, Engine O/H YOKTNV8 a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 GDG, GGE, GKM, GZG0, KSA, KSA, KSA, KUP, MU, NBK, NU, QK, QKA, SK, XWL Bore:.0 in 8.00 mm YOKTNV8/ ) Front Seal ) Rear Seal ) Crankshaft Y Use b) Y Y ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket Y ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod Y Use Use of ) Camshaft ) Tappet ) Y ) Y ) N/A ) YMGSTNE8 ) Y900-0 ) Y F ) Y900-0 ) Y X ) ) Y979-0 X ) ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve Y900-0 X ) ) ) ) ) Y979-0 X6 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () WEB SITE: Y08

272 YANMAR Model TNV8T a b BGKL, BGMG, BKSA, BMCU, Engine O/H YOKTNV8T a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 BMNK, BXNK, GKL, GMG, GYM, KMW, LUZ, XKMR, XWL Bore:.0 in 8.00 mm YOKTNV8T/ ) Front Seal ) Rear Seal ) Crankshaft Y Use b) Y Y ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket Y ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod Y Use Use of ) Camshaft ) Tappet ) Y ) Y ) N/A ) YMGSTNE8 ) Y900-0 ) Y F ) Y900-0 ) Y X ) ) Y979-0 X ) ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve ) ) ) ) ) Y979-0 X6 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () Y09 TEL , , FAX 0.9.0

273 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR YANMAR DIESEL ENGINES YANMAR Model TNV8 a b DMW, GGE, KLAN, KVA, Engine O/H YOKTNV8 a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 KWA, LU YOKTNV8/ Y Y Y Bore:.0 in 8.00 mm Use b) Y Y Use Use of ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) Y ) Y ) N/A ) YMGSTNE8 ) Y ) Y F ) Y960-0 ) Y X ) ) Y979-0 X ) ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve ) ) ) ) ) Y979-0 X8 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () WEB SITE: Y0

274 YANMAR Model TNV8T a b BGGE, BGKL, BGMG, BGYM, Engine O/H YOKTNV8T a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 BMSA, BMSA, BPCU, DFM, DMW, DSA, DSA, GGE, GGEH, GGEHC, GKL, GKM, GKMR, GMG, KFN, KLAN, KSNV, KWA, MWA, XNSS, XSU, XTBL, XWA, XWL YOKTNV8T/ ) Front Seal ) Rear Seal ) Crankshaft Y Use b) Y Y ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket Y ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod Y Use Use of ) Camshaft ) Tappet Bore:.0 in 8.00 mm ) Y ) Y ) N/A ) YMGSTNE8 ) Y ) Y F ) Y960-0 ) Y X ) ) Y979-0 X ) ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve ) ) ) ) ) Y979-0 X8 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () Y TEL , , FAX 0.9.0

275 CATALOG UG-0JDCUPKCAYA-0 REPLACEMENT PARTS FOR YANMAR DIESEL ENGINES YANMAR Model TNV88 a b BKMW, DSAP, GYM, MU, NBK, Engine O/H YOKTNV88 a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 NU, XWL YOKTNV88/ Y Y Y Bore:.6 in mm Use b) Y Y Use Use of ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) Y ) Y ) N/A ) YMGSTNE88 ) Y ) Y F ) Y900-0 ) Y X ) ) Y979-0 X ) ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve ) ) ) ) ) Y979-0 X6 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () WEB SITE: Y

276 YANMAR Model TNV88 a b DSA, GGEP, GYM, LU, NBK, Engine O/H YOKTNV88 a) Piston b) Ring a) Y Main Bearing Y ConRod Bearing Y90-60 Thrust Washers Y90-09 XWL, DSAP YOKTNV88/ Y Y Y Use Bore:.6 in mm b) Y Y Use Use of ) Front Seal ) Rear Seal ) Crankshaft ) O/H Gasket ) Head Gasket ) Liquid Gasket ) Rocker Cover Gasket ) Bush, Con Rod ) Bolt, Con Rod ) Bushing, Cam ) Con Rod ) Camshaft ) Tappet ) Y ) Y ) N/A ) YMGSTNE88 ) Y ) Y F ) Y960-0 ) Y X ) ) Y979-0 X ) ) N/A ) N/A Valve, Intake Valve, Exhaust Guide, Valve ) Intake ) Exhaust ) Lock, Valve ) Stem Seal Int ) Stem, Seal Exh Spring, Valve ) ) ) ) ) Y979-0 X8 Thermostat Oil Pump Lift Pump Water Pump () Check your application for proper usage. ) Y () ) Y () ) Y () Y TEL , , FAX 0.9.0