CLIMATE CONTROL SOLUTION

Transcription

1 CLIMATE CONTROL SOLUTION Product catalog

2 Content Filter fans 3 Filter fans 4 Roof exhaust units 6 Accessories 7 Technical and assembly drawings 8 Cooling units 14 Wall-mounted cooling units 15 Top-mounted cooling units 24 Thermoelectric unit 28 Technical and assembly drawings 29 2

3 Filter fans Forced ventilation fans maintain the correct temperature inside the cabinet by exchanging heated inside air for cool outside air. Rapid installation - mounting without screws by pressing it into the enclosure. Slide opening - cover fixed to and released from base via sliding catches. Operational safety - replace the filter membrane from the outside without tools. ADVANTAGES Mount without screws into square openings using elastic clips Replace the filter membrane from the outside without tools Reversible airflow direction Airflow up to 8 m³/h Installation for plate thickness between 1mm up to 2mm Standard protection degree IP 54 Wall and top mounting options Operational temperature range from -1 C to +7 C Permanent sealing gasket in polyurethane foam UV protection TECHNICAL SPECIFICATION Material made with plastic parts (ABS/PC); all parts are made out of self-extinguishing material according to UL 94V- Standard color: RAL 735 (other colors available upon request) Filter media in thermo-linked progressive structure synthetic fiber filter class G3 according to EN 779; filter class G4 according to EN 779 and UL 9; class 2 approved and selfextinguishing in F1 class according to DIN Filter mats are washable Shielded and self-lubricating ball-bearing fans Standard protection degree: IP54 according to EN 6529, and NEMA 12 according to UL IP55 on request (according to EN 6529) IP56 by using hose-proof cover EMC version available upon request 3

4 SIZING When we use fan filters, we must have a target temperature inside the cabinet that is greater than the ambient temperature outside the cabinet (Te), which makes the difference (ΔT) between the inside and outside temperatures always positive. We can calculate the fanfiltered airflow by taking the ratio between the thermal power (Q ) and the temperature difference (ΔT) and multiply that by the heat transfer coefficient (f), which considers the physical properties of air, including heat and density which can change with altitude (m). Ti > Te Altitude [m] f [m³k/wh] ~ 1 3,1 1 ~ 3,2 ~ 3,3 ~ 7 3,4 7 ~ 1 3,5 C C ΔT=Ti-Te -=1 C W 3,3 Airflow = f x Q 3,3 x = 165 x ΔT 1 m³ h Ti = target temperature inside the cabinet Te = ambient temperature outside the cabinet ΔT = temperature difference between the inside and outside of the cabinet Q = active thermal load inside the cabinet f = heat transfer coefficient RECOMMENDATIONS FOR INSTALLATION The filter fan unit should be placed in the lower part of the enclosure to allow the cool air to enter into the enclosure and form a slight overpressure. This means that air flows into the enclosure through the filter fan unit without any dirt/dust and removes warm air from the enclosure through the outlet filter grid. If the filter fan unit is installed in the opposite direction, dust and dirt can enter into the enclosure along with cool air. The filter fan unit should be placed in the bottom third of the cabinet and the outlet filter grid should be placed as high as possible. This will prevent the accumulation of warm air in the upper part of the enclosure. Airflow směr B direction B směr A direction A 4

5 Filter fans D1 D2 Specifications: Material: PC/ABS Alloy, PA 66 GH13 HSL for elastic clips Color: RAL 735 Protection degree: IP54 (IP55 using special filter mats, IP56 using hose-proof cover) Fixing system: by elastic clips, otherwise by four selfthreading screws Type of filter media: thermo-linked progressive structure with synthetic fiber Filtering class: G3, according to EN 779 Dust retention capacity: 6 g/m 2 Airflow direction: reversible Filter media can be washed up to about 1 timest L1 H1 Unit with filter mat ready for connection. Filter fans, airflow 12-1 m³/h Order code ID-EF-1-4 ID-EF-1-1 ID-EF-4-4 ID-EF-4-1 ID-EF-1-4 ID-EF-1-1 H1 16,5 16, ,9 3,9 Dimensions in mm L1 16,5 16, ,9 3,9 D1 6,7 6,7 7,7 7,7 8 8 Max. installation depth in mm D2 59,9 46,9 65,5 65,3 87,5 87,3 Voltage/Frequency 2 V, /6 Hz 24 V DC 2 V, /6 Hz 24 V DC 2 V, /6 Hz 24 V DC Rated current 62/ ma 85 ma 11/1 ma 31 ma 16/1 ma 342 ma Rated power 1/8, W 2, W 18/17 W 7,4 W 18/18 W 8,2 W Max. airflow 12/15 m³/h 15 m³/h 45/ m³/h 47 m³/h 1/11 m³/h 1 m³/h Static pressure 23/33 Pa Pa 55/62 Pa 56 Pa 55/6 Pa 6 Pa Fan noise 31/33 db(a) db(a) 48/51 db(a) 42,5 db(a) 48/54 db(a) 42 db(a) Weight,39 kg,39 kg,76 kg,45 kg,96 kg,64 kg Lifetime h 1 h 57 h h 57 h h Rated temperature range -1 C to +55 C -1 C to +55 C -1 C to +55 C -1 C to +55 C -1 C to +55 C -1 C to +55 C Cutout 91,5x91,5 mm 91,5x91,5 mm 1x1 mm 1x1 mm 177x177 mm 177x177 mm Outlet filter grid Order code ID-EF-1 ID-EF-1 ID-EF-3 ID-EF-3 ID-EF-5 ID-EF-5 Accessories Package Spare filter mats IP54 5 pcs ID-EF-F1 ID-EF-F1 ID-EF-F3 ID-EF-F3 ID-EF-F5 ID-EF-F5 Spare filter mats IP55 5 pcs ID-EF-F55 ID-EF-F55 Hose-proof cover 1 pc ID-EF-C1 ID-EF-C1 ID-EF-C3 ID-EF-C3 ID-EF-C5 ID-EF-C5 Plastic adaptors 1 pc ID-EF-A3 ID-EF-A3 Filter fans, airflow 2-71 m³/h Order code ID-EF-23-4 ID-EF-22-1 ID-EF-52-4 ID-EF-71-4 H1 3 3 Dimensions in mm L1 3 3 D1 8,9 8,9 9,5 9,5 Max. installation depth in mm D2 115,3 116,5 1,7 149 Voltage/Frequency 2 V, /6 Hz 24 V DC 2 V, /6 Hz 2 V, /6 Hz Rated current 134/16 ma 71 ma 318/381 ma 6/8 ma Rated power 32/36 W 17 W 73/87 W 1/19 W Max. airflow 2/27 m³/h 2 m³/h 5/58 m³/h 71/8 m³/h Static pressure 115/155 Pa 99 Pa 16/185 Pa 195/5 Pa Fan noise /55 db(a) 58 db(a) 65,3/68,1 db(a) 72,8/75,8 db(a) Weight 1,5 kg 1,4 kg 3,1 kg 4, kg Lifetime 8 h 1 h 65 h 7 h Rated temperature range -1 C to +55 C -1 C to +55 C -1 C to +7 C -1 C to +6 C Cutout 224x224 mm 224x224 mm 292x292 mm 292x292 mm Outlet filter grid Order code ID-EF-7 ID-EF-7 ID-EF-9 ID-EF-9 Accessories Package Spare filter mats IP54 5 pcs ID-EF-F7 ID-EF-F7 ID-EF-F9 ID-EF-F9 Spare filter mats IP55 5 pcs ID-EF-F57 ID-EF-F57 ID-EF-F59 ID-EF-F59 Hose-proof cover 1 pc ID-EF-C7 ID-EF-C7 ID-EF-C9 ID-EF-C9 Plastic adaptors 1 pc ID-EF-A7 ID-EF-A7 ID-EF-A9 ID-EF-A9 EMC version and other input voltage options available upon request. 5

6 Roof exhaust units Specification: Material: plastic parts in PC/ABS Alloy and aluminum Color: RAL 735 Protection degree: IP54/IP55 Fixing system: mounting by nr. 8 ø 4x16 mm screws Type of filter media: thermo-linked progressive structure with synthetic fiber Filtering class: G3, according to EN 779 Dust retention capacity: 38 g/m 2 Filter media can be washed up to about 1 times Unit ready for connection. Roof exhaust unit, airflow 4 m³/h Order code Dimensions in mm Voltage/Frequency Rated current Rated power Max. airflow Protection degree Static pressure Fan noise Weight Lifetime H 324 L 324 D 94 * Technical drawings of outlet filter grid are on page 12. Other input voltage options available upon request. ID-EFT V, /6 Hz 9/36 ma 7/83 W 4/49 m³/h IP54 3/48 Pa 67,9/71 db(a) 2,1 kg 59 / 73 h Rated temperature range -1 C to +6 C Cutout 175x175 mm Outlet filter grid Order code ID-EF-9 * Accessories Package Spare filter mats IP54 1 pc ID-EFT-F 6

7 Accessories Hose-proof cover Specifications: Material: AISI 4 stainless steel Protection degree: IP56 Assembly parts. Plastic adaptors Specifications: Material: plastic parts in ABS/PC Color: RAL 735 Assembly parts. Outlet filter grid Specifications: Material: PC/ABS Alloy, PA 66 GH13 HSL for elastic clips Color: RAL 735 Protection degree: IP54/IP55 Unit ready for mounting. For filter fan units Package Order code ID-EF-1 1 pc ID-EF-C1 ID-EF-4 1 pc ID-EF-C3 ID-EF-1 1 pc ID-EF-C5 ID-EF-22/23 1 pc ID-EF-C7 ID-EF-52/71 1 pc ID-EF-C9 For filter fan units Package Order code ID-EF-4 1 pc ID-EF-A3 ID-EF-22/23 1 pc ID-EF-A7 ID-EF-52/71 1 pc ID-EF-A9 For filter fan units Package Order code ID-EF-1 1 pc ID-EF-1 ID-EF-4 1 pc ID-EF-3 ID-EF-1 1 pc ID-EF-5 ID-EF-22/23 1 pc ID-EF-7 ID-EF-52/71 1 pc ID-EF-9 Spare filter mats IP54/IP55 Specifications: Material: thermo-linked progressive structure with synthetic fiber Protection degree: IP54/IP55 For filter fan units Protection degree Package Order code ID-EF-1 IP54 5 pcs ID-EF-F1 ID-EF-4 IP54 5 pcs ID-EF-F3 ID-EF-1 IP54 5 pcs ID-EF-F5 ID-EF-22/23 IP54 5 pcs ID-EF-F7 ID-EF-52/71 IP54 5 pcs ID-EF-F9 ID-EF-1 IP55 5 pcs ID-EF-F55 ID-EF-22/23 IP55 5 pcs ID-EF-F57 ID-EF-52/71 IP55 5 pcs ID-EF-F59 THERMOSTAT FOR COOLING AND HEATING Specifications: Sensor element: thermostatic bi-metal Switching difference (hysteresis) is 7 C ± 3 K Switching capacity (max. load): 1 A resistive/2 A 1 V AC Connections: 2-pole terminal for AWG 14 max. (2,5 mm²) Mounting: clip for 35 mm DIN rail Protection degree: IP Dimensions (HxWxD): 55 x 33 x 43 mm Weight: g Setting temperature range: C to + 6 C Thermostat ready for connection Termostat for cooling Package Order code 1 pc ID-EO-TC Termostat for heating Package Order code 1 pc ID-EO-TH Thermostat for cooling: with normally open contact, when the temperature increases the contact closes, activating the fan to evacuate the heat. Thermostat for heating: with normally closed contact, when the temperature falls below the setpoint, the contact closes, activating the resistance heater to prevent condensation. 7

8 Technical and assembly drawings FILTER FAN ID-EF-1-x Dimensions OUTLET FF8U FILTER - filtro GRID ID-EF-1 FF8U FF8U - filtro- filtro Dimensions FF8U FF8U filtro filtro FILTER FAN ID-EF-1-4 Dimensions FF8U - filtro Ø1.8 Ø FF8AN FF8AN FF8AN FF8AN 6 FF8AN FF8AN 8 Static Pressure [Pa] 8 8 Static Pressure [Pa] 6 8 Ø1.8 Ø Mounting Ø1.8 cutout Ø FF8DN FF8DN FF8DN Air flow FF8DN FF8DN FF8DN 8 8 Static Pressure (Pa) Air Flow [m /h] Air Flow [m 3 /h] Air Flow (m3/h) Air flow FF8 FF8 ID-EF Static Pressure (Pa) Hz 6 Hz ID-EF-1-4 ID-EF FILTER FAN ID-EF-1-1 FF8DN Dimensions FF8GAN Air Flow (m3/h) Air flow 45 Direction A Direction B ID-EF-4-1 ID-EF Static Pressure (Pa) All dimensions are in mm Air Flow (m3/h) 8

9 FILTER FAN ID-EF-4-x Dimensions Mounting cutout OUTLET FILTER GRID ID-EF-3 FF12A FF12A - filtro - filtro FF12AF FF12AF FF12DN FF12DN FF12AN FF12AN FF12A FF12A - filtro - filtro FF12AF FF12AF FF12DN FF12DN FF12AN FF12AN Dimensions Air flow 1 ID-EF Static Pressure (Pa) FILTER FAN ID-EF-4-4 Dimensions FF12AN FF12AN FF12A24F FF12A24F Air Flow (m3/h) Air flow Hz 6 Hz ID-EF-4-4 ID-EF-1-4 Static Pressure (Pa) FILTER FAN ID-EF-4-1 Dimensions Air Flow (m3/h) Air flow Direction A Direction B ID-EF-4-1 ID-EF-1-1 Static Pressure (Pa) All dimensions are in mm Air Flow (m3/h) 9

10 FILTER FAN ID-EF-1-x Dimensions Mounting cutout OUTLET FILTER GRID ID-EF-5 FF13 FF13 cut-out cut-out FF13A FF13A - filtro - - filtro FF13PAF FF13PAF FF13PAN FF13PAN FF13PD FF13PD Dimensions FF13A FF13A filtro filtro FF13PAF Air flow FF13PAN FF13PD FF13PD FILTER FAN ID-EF-1-4 FF13PAF FF13PAF Dimensions Static Pressure (Pa) ID-EF Air Flow (m3/h) FF13PAN FF13PAN FF13PD FF13PD Air flow Static Pressure (Pa) 7 6 Hz 6 Hz ID-EF-1-4 ID-EF Air Flow (m3/h) FILTER FAN ID-EF-1-1 Dimensions Air flow 7 6 ID-EF-1-1 ID-EF-22-1 Static Pressure (Pa) All dimensions are in mm Air Flow (m3/h) 1

11 FILTER FANS ID-EF-23-4, ID-EF-22-1 Dimensions Mounting cutout OUTLET FILTER GRID ID-EF-7 FF15A FF15A - filtro - filtro FF15AF FF15AF FF15DN FF15DN Dimensions FF15A FF15A filtro filtro FF15AF FF15AF Air FF15DN flow FF15DN 1 1 ID-EF Static Pressure (Pa) Air Flow (m3/h) FILTER FAN ID-EF-23-4 Dimensions Air flow Hz 6 Hz ID-EF-23-4 ID-EF Static Pressure (Pa) FILTER FAN ID-EF-22-1 Dimensions Air Flow (m3/h) Air flow All dimensions are in mm Static Pressure (Pa) Direction A Direction B 11 ID-EF Air Flow (m3/h) 11

12 FILTER FAN ID-EF-52-4, ID-EF-71-4 Dimensions Mounting cutout OUTLET FILTER GRID ID-EF FFA - filtro FFA - filtro FFA1 FFA1FFA FFA FFA FFA - filtro FFA - filtro - filtro FFA1 FFA1 FFA1 FFA FFA FFA Dimensions FFA - filtro FFA1 Air FFA flow 1 1 ID-EF Static Pressure (Pa) FILTER FAN ID-EF-52-4 Dimensions Air Flow (m3/h) Air flow Hz 6 Hz ID-EF Static Pressure (Pa) FILTER FAN ID-EF-71-4 Dimensions Air Flow (m3/h) Air flow Hz 28 Static Pressure (Pa) 1 6 Hz ID-EF All dimensions are in mm Air Flow (m3/h) 12

13 ROOF EXHAUST UNITS ID-EFT-42-4 Dimensions Mounting cutout Outlet filter grid Filter fan ID-EF-1 Filter fan ID-EF-4 12-vista 12-vista frontale 12-vista frontale 12-vista e frontale laterale e e frontale laterale e laterale e 12-vista e laterale 12-vista frontale frontale e laterale e e laterale vista 8-vista frontale 8-vista frontale 8-vista e frontale laterale e e frontale laterale e laterale e 8-vista e laterale 8-vista frontale frontale e laterale e e laterale Filter fan ID-EF Filter fan ID-EF-22, ID-EF-23 Filter fan ID-EF-52, ID-EF-71 Plastic adaptors Filter fan ID-EF-4 Filter fan ID-EF-22, ID-EF-23 Filter fan ID-EF-52, ID-EF ±.2 23± ± ± ± ± ± vista frontale e laterale 15-vista frontale e laterale vista frontale e laterale -vista frontale e laterale 15-vista frontale 15-vista e frontale laterale e laterale 15-vista 41.5 frontale e laterale 15-vista frontale 15-vista e frontale laterale e laterale 15-vista 41.5 frontale e laterale vista frontale -vista e frontale laterale e laterale -vista frontale e laterale -vista frontale -vista e frontale laterale e laterale -vista frontale e laterale ± All dimensions are in mm

14 Cooling units Our cooling units are designed to operate with an absolute minimum need of maintenance. They are environmentally friendly and do not need dirt collecting filter mats. Models are available with a cooling capacity range of W to 26 W. ADVANTAGES Cooling capacity range from W to 26 W Maintenance-free = no filter mats Better performance and reliability thanks to wide-ribbed aluminum condenser Environmentally friendly refrigerant R134a Steel sheet/stainless steel housing Easy regulation and monitoring Fast and easy installation High-quality components help these cooling units run smoothly and last for a long time (for example, they come equipped with a Mitsubishi Electric rotary piston compressor) Transport units in any position Worldwide certification (UL, CUL, CE) Regulation and monitoring Each of our cooling unit has a powerful micro-controller that monitors all the important system functions. The introduction of the modern Flexmaster control technology has set new standards. Flexmaster allows you to connect cooling units and manage their individual or common settings. Easy to install (Plug&Play). Flexible temperature strategy: All units in the network usually follow the highest temperature in the row of cabinets. However, Flexmaster allows you to customize your setup any way you want. Flexible open-door function: Customize your setup so that all the units switch off when door is opened. (Specific applications can also be customized based on the customer s needs) Our network system can set the individual temperature for each unit in your network. Temperatures can be set by connecting to the network (there is a single setting for all the units) or directly to the unit (when one or several units are working under different temperature settings in one network). This allows units that are cooling a separate/isolated cabinet system to be included in the network. These units could, for example, react to their own temperature situation, while at the same time set off system-wide alarms and take on the cabinet and alarm temperatures of the network. Our simplified connection: If the network connection fails on one or several units, the affected unit/units would continue to work as a standalone, while the other units will continue working as a network system. Our network system uses an isolated connection, which will protect the units and the network if, for example, a power-surge affects one of the units. The system network will isolate the problem so that the network s other units are not comprised. Flexmaster has many standard functions, which can, among other things, record the unit s working hours and the number of compressor cycles. Temperatures and any disturbances are stored for 48 hours and can be viewed on a PC or laptop, allowing you to completely monitor your network. 14

15 Wall-mounted cooling units SLIM 3 W D H W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Internal mounting Detailed drawing and characteristics: see page 29 Certification: UL, CUL, CE Unit ready for connection. External mounting Internal mounting Wall-mounted cooling units, cooling capacity 3 W Order code AC-WM3-3- AC-WM3-3- Material Steel sheet Stainless steel H 5 5 Dimensions mm W D Voltage/Frequency 2 V; /6 Hz ~N 2 V; /6 Hz ~N Cooling capacity to DIN 3168 L35 L35 3 W 3 W L35 L 1 W 1 W Power Consumption L35 L35 3 W 3 W Max. air volume flow Ambient air circuit 17 m³/h 17 m³/h Cabinet air circuit 1 m³/h 1 m³/h Rated current 1,5 A 1,5 A Starting current 3,2 A 3,2 A Pre-Fuse T 6 A 6 A Operating temperature range + C to + C + C to + C Weight 14 kg 14 kg Cutout 1 x 1 mm 1 x 1 mm Compressor Rotary piston Rotary piston Connection Connection terminals Connection terminals Other input voltage options available upon request. 15

16 Wall-mounted cooling units SLIM W D H W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Internal mounting Detailed drawing and characteristics: see page 29 Certification: UL, CUL, CE Unit ready for connection. External mounting Internal mounting Wall-mounted cooling units, cooling capacity W Order code AC-WM3-4- AC-WM3-4- Material Steel sheet Stainless steel H 5 5 Dimensions mm W 3 3 D Voltage/Frequency 2 V; /6 Hz ~N 2 V; /6 Hz ~N Cooling capacity to DIN 3168 L35 L35 W W L35 L 1 W 1 W Power Consumption L35 L W 326 W Max. air volume flow Ambient air circuit m³/h m³/h Cabinet air circuit 1 m³/h 1 m³/h Rated current 1,5 A 1,5 A Starting current 3,2 A 3,2 A Pre-Fuse T 6 A 6 A Operating temperature range + C to + C + C to + C Weight 15 kg 15 kg Cutout 4 x 8 mm 4 x 8 mm Compressor Rotary piston Rotary piston Connection Connection terminals Connection terminals Other input voltage options available upon request. 16

17 Wall-mounted cooling units SLIM W horizontal D H Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Internal mounting Detailed drawing and characteristics: see page Certification: UL, CUL, CE Unit ready for connection. External mounting W Internal mounting Wall-mounted cooling units horizontal, cooling capacity W Order code AC-WM3-4-H AC-WM3-4-4H Material Steel sheet Stainless steel H 3 3 Dimensions mm W 5 5 D Voltage/Frequency 2 V; /6 Hz ~N 2 V; /6 Hz ~N Cooling capacity to DIN 3168 L35 L35 W W L35 L 1 W 1 W Power Consumption L35 L35 3 W 3 W Max. air volume flow Ambient air circuit 18 m³/h 18 m³/h Cabinet air circuit 1 m³/h 1 m³/h Rated current 1,5 A 1,5 A Starting current 3,2 A 3,2 A Pre-Fuse T 6 A 6 A Operating temperature range + C to + C + C to + C Weight 15 kg 15 kg Cutout 321 x 1 mm 321 x 1 mm Compressor Rotary piston Rotary piston Connection Connection terminals Connection terminals Other input voltage options available upon request. 17

18 Wall-mounted cooling units SLIM W D H W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Internal mounting Detailed drawing and characteristics: see page Certification: UL, CUL, CE Unit ready for connection. External mounting Internal mounting Wall-mounted cooling units, cooling capacity W Order code AC-WM3-5- AC-WM3-5- Material Steel sheet Stainless steel H 6 6 Dimensions mm W 3 3 D Voltage/Frequency 2 V; /6 Hz ~N 2 V; /6 Hz ~N Cooling capacity to DIN 3168 L35 L35 W W L35 L 16 W 16 W Power Consumption L35 L35 49 W 49 W Max. air volume flow Ambient air circuit 28 m³/h 28 m³/h Cabinet air circuit 1 m³/h 1 m³/h Rated current 2,5 A 2,5 A Starting current 5,8 A 5,8 A Pre-Fuse T 6 A 6 A Operating temperature range + C to + C + C to + C Weight 16 kg 16 kg Cutout 581 x 1 mm 581 x 1 mm Compressor Rotary piston Rotary piston Connection Connection terminals Connection terminals Other input voltage options available upon request. 18

19 Wall-mounted cooling units SLIM 8 W D H W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Internal mounting Detailed drawing and characteristics: see page 31 Certification: UL, CUL, CE External mounting Unit ready for connection. Internal mounting Wall-mounted cooling units, cooling capacity 8 W Order code AC-WM3-8- AC-WM3-8-6 AC-WM3-8- AC-WM3-8-6 Material Steel sheet Steel sheet Stainless steel Stainless steel Dimensions mm Voltage/Frequency 2 V; /6 Hz ~N H W D V; Hz (3~) -46 V; 6 Hz (3~) 2 V; /6 Hz ~N V; Hz (3~) -46 V; 6 Hz (3~) Cooling capacity to DIN 3168 L35 L35 8 W 8 W 8 W 8 W L35 L 58 W 58 W 58 W 58 W Power Consumption L35 L35 66 W 69 W 66 W 69 W Max. air volume flow Ambient air circuit 31 m³/h 31 m³/h 31 m³/h 31 m³/h Cabinet air circuit 18 m³/h 18 m³/h 18 m³/h 18 m³/h Rated current 4 A 2,9 A 4 A 2,9 A Starting current 16 A 8,2 A 16 A 8,2 A Pre-Fuse T 1 A 3,6 A 1 A 3,6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight 41 kg 41 kg 41 kg 41 kg Cutout 954 x 376 mm 954 x 376 mm 954 x 376 mm 954 x 376 mm Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP. 19

20 Wall-mounted cooling units SLIM 11 W D H W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Internal mounting Detailed drawing and characteristics: see page 31 Certification: UL, CUL, CE External mounting Unit ready for connection. Internal mounting Wall-mounted cooling units, cooling capacity 11 W Order code AC-WM3-11- AC-WM AC-WM3-11- AC-WM Material Steel sheet Steel sheet Stainless steel Stainless steel Dimensions mm Voltage/Frequency 2 V; /6 Hz ~N H W D V; Hz (3~) -46 V; 6 Hz (3~) 2 V; /6 Hz ~N V; Hz (3~) -46 V; 6 Hz (3~) Cooling capacity to DIN 3168 L35 L35 11 W 11 W 11 W 11 W L35 L 7 W 7 W 7 W 7 W Power Consumption L35 L35 98 W 765 W 98 W 765 W Max. air volume flow Ambient air circuit 38 m³/h 38 m³/h 38 m³/h 38 m³/h Cabinet air circuit 27 m³/h 27 m³/h 27 m³/h 27 m³/h Rated current 5,2 A 3,2 A 5,2 A 3,2 A Starting current 15,5 A 8,2 A 15,5 A 8,2 A Pre-Fuse T 1 A 3 x 6 A 1 A 3 x 6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight 44 kg 44 kg 44 kg 44 kg Cutout 1214 x 376 mm 1214 x 376 mm 1214 x 376 mm 1214 x 376 mm Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP.

21 Wall-mounted cooling units SLIM 1 W D H Internal mounting W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Internal mounting Detailed drawing and characteristics: see page 32 Certification: UL, CUL, CE Unit ready for connection. External mounting Wall-mounted cooling units, cooling capacity 1 W Order code AC-WM3-15- AC-WM AC-WM3-15- AC-WM Material Steel sheet Steel sheet Stainless steel Stainless steel Dimensions mm Voltage/Frequency 2 V; /6 Hz ~N H W D V; Hz (3~) -46 V; 6 Hz (3~) 2 V; /6 Hz ~N V; Hz (3~) -46 V; 6 Hz (3~) Cooling capacity to DIN 3168 L35 L35 1 W 1 W 1 W 1 W L35 L 1 W 1 W 1 W 1 W Power Consumption L35 L35 15 W 935 W 15 W 935 W Max. air volume flow Ambient air circuit 47 m³/h 47 m³/h 47 m³/h 47 m³/h Cabinet air circuit 3 m³/h 3 m³/h 3 m³/h 3 m³/h Rated current 8,1 A 2,1 A 8,1 A 2,1 A Starting current 22 A 15 A 22 A 15 A Pre-Fuse T 1 A 3 x 6 A 1 A 3 x 6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight kg 55 kg kg 55 kg Cutout 1531 x 376 mm 1531 x 376 mm 1531 x 376 mm 1531 x 376 mm Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP. 21

22 Wall-mounted cooling units SLIM W D External mounting H Semi-flush mounting W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Semi-flush mounting Internal mounting Detailed drawing and characteristics: see page 32 Certification: CE Unit ready for connection. Internal mounting Wall-mounted cooling units, cooling capacity W Order code AC-WM3-- AC-WM3--6 AC-WM3-- AC-WM3--6 Material Steel sheet Steel sheet Stainless steel Stainless steel Dimensions mm Voltage/Frequency 2 V; /6 Hz ~N H W D V; Hz (3~) -46 V; 6 Hz (3~) 2 V; /6 Hz ~N V; Hz (3~) -46 V; 6 Hz (3~) Cooling capacity to DIN 3168 L35 L35 W W W W L35 L 1 W 1 W 1 W 1 W Power Consumption L35 L35 1 W 18 W 1 W 18 W Max. air volume flow Ambient air circuit 6 m³/h 6 m³/h 6 m³/h 6 m³/h Cabinet air circuit 6 m³/h 6 m³/h 6 m³/h 6 m³/h Rated current 5,5 A 2,3 A 5,5 A 2,3 A Starting current 24 A 14 A 24 A 14 A Pre-Fuse T 16 A 3 x 6 A 16 A 3 x 6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight 67 kg 67 kg 67 kg 67 kg Cutout 15 x 377 mm 15 x 377 mm 15 x 377 mm 15 x 377 mm Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP. 22

23 Wall-mounted cooling units SLIM 26 W D External mounting H Semi-flush mounting W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Mounting: External mounting Semi-flush mounting Internal mounting Detailed drawing and characteristics: see page 33 Certification: CE Unit ready for connection. Internal mounting Wall-mounted cooling units, cooling capacity 26 W Order code AC-WM3-26- AC-WM AC-WM3-26- AC-WM Material Steel sheet Steel sheet Stainless steel Stainless steel Dimensions mm Voltage/Frequency 2 V; /6 Hz ~N H W D V; Hz (3~) -46 V; 6 Hz (3~) 2 V; /6 Hz ~N V; Hz (3~) -46 V; 6 Hz (3~) Cooling capacity to DIN 3168 L35 L35 26 W 26 W 26 W 26 W L35 L 21 W 21 W 21 W 21 W Power Consumption L35 L35 15 W 16 W 15 W 16 W Max. air volume flow Ambient air circuit 7 m³/h 7 m³/h 7 m³/h 7 m³/h Cabinet air circuit 7 m³/h 7 m³/h 7 m³/h 7 m³/h Rated current 7,2 A 2 A 7,2 A 2 A Starting current 32 A 21 A 32 A 21 A Pre-Fuse T A 3 x 6 A A 3 x 6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight 7 kg 7 kg 7 kg 7 kg Cutout 15 x 377 mm 15 x 377 mm 15 x 377 mm 15 x 377 mm Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP. 23

24 Top-mounted cooling units W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Detailed drawing and characteristics: see page 34 Certification: UL, CUL, CE, GS, EMC Unit ready for connection. Top-mounted cooling units, cooling capacity W Order code AC-TM3-2- AC-TM3-2- Material Steel sheet Stainless steel H Dimensions mm W 5 5 D 3 3 Voltage/Frequency 2 V; /6 Hz ~N 2 V; /6 Hz ~N Cooling capacity to DIN 3168 L35 L35 W W L35 L 11 W 11 W Power Consumption L35 L35 28 W 28 W Max. air volume flow Ambient air circuit m³/h m³/h Cabinet air circuit 11 m³/h 11 m³/h Rated current 1,5 A 1,5 A Starting current 3,2 A 3,2 A Pre-Fuse T 6 A 6 A Operating temperature range + C to + C + C to + C Weight 14 kg 14 kg Compressor Rotary piston Rotary piston Connection 3 m cable 3 m cable Other input voltage options available upon request. 24

25 Top-mounted cooling units 4 W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Detailed drawing and characteristics: see page 34 Certification: UL, CUL, CE, GS, EMC Unit ready for connection. Top-mounted cooling units, cooling capacity 4 W Order code AC-TM3-4- AC-TM3-4- Material Steel sheet Stainless steel H 2 2 Dimensions mm W 3 3 D 4 4 Voltage/Frequency 2 V; /6 Hz ~N 2 V; /6 Hz ~N Cooling capacity to DIN 3168 L35 L35 4 W 4 W L35 L 27 W 27 W Power Consumption L35 L35 39 W 39 W Max. air volume flow Ambient air circuit m³/h m³/h Cabinet air circuit 1 m³/h 1 m³/h Rated current 1,9 A 1,9 A Starting current 5 A 5 A Pre-Fuse T 6 A 6 A Operating temperature range + C to +55 C + C to +55 C Weight 23 kg 23 kg Compressor Rotary piston Rotary piston Connection Connection terminals Connection terminals Other input voltage options available upon request.

26 Top-mounted cooling units 11 W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Detailed drawing and characteristics: see page 34 Certification: CE Unit ready for connection. Top-mounted cooling units, cooling capacity 11 W Order code AC-TM3-11- AC-TM AC-TM3-11- AC-TM Material Steel sheet Steel sheet Stainless steel Stainless steel H Dimensions mm W D Voltage/Frequency 2 V; /6 Hz ~N - 46 V; /6 Hz 3~ 2 V; /6 Hz ~N - 46 V; /6 Hz 3~ Cooling capacity to DIN 3168 L35 L35 11 W 11 W 11 W 11 W L35 L 71 W 71 W 71 W 71 W Power Consumption L35 L35 8 W 8 W 8 W 8 W Max. air volume flow Ambient air circuit 7 m³/h 7 m³/h 7 m³/h 7 m³/h Cabinet air circuit 36 m³/h 36 m³/h 36 m³/h 36 m³/h Rated current 4 A 1,6 A 4 A 1,6 A Starting current 15 A 7,4 A 15 A 7,4 A Pre-Fuse T 6 A 3 x 6 A 6 A 3 x 6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight 55 kg 55 kg 55 kg 55 kg Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP. 26

27 Top-mounted cooling units 1 and W Specification: Housing material: steel sheet/stainless steel Color: RAL 735 Refrigerant: R134a Protection degree: Cabinet air circuit: IP54 Ambient air circuit: IP24 Detailed drawing and characteristics: see page 35 Certification: CE Unit ready for connection. Top-mounted cooling units, cooling capacity 1 W Order code AC-TM3-15- AC-TM AC-TM3-15- AC-TM Material Steel sheet Steel sheet Stainless steel Stainless steel Dimensions mm H W D Voltage/Frequency 2 V; /6 Hz ~N - 46 V; /6 Hz 3~ 2 V; /6 Hz ~N - 46 V; /6 Hz 3~ Cooling capacity to DIN 3168 L35 L35 1 W 1 W 1 W 1 W L35 L 9 W 9 W 9 W 9 W Power Consumption L35 L35 1 W 1 W 1 W 1 W Max. air volume flow Ambient air circuit 86 m³/h 86 m³/h 86 m³/h 86 m³/h Cabinet air circuit 5 m³/h 5 m³/h 5 m³/h 5 m³/h Rated current 5,3 A 3 A 5,3 A 3 A Starting current 22 A 15 A 22 A 15 A Pre-Fuse T 1 A 3 x 6 A 1 A 3 x 6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight 58 kg 58 kg 58 kg 58 kg Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP. Top-mounted cooling units, cooling capacity W Order code AC-TM3-- AC-TM3--6 AC-TM3-- AC-TM3--6 Material Steel sheet Steel sheet Stainless steel Stainless steel Dimensions mm H W D Voltage/Frequency 2 V; /6 Hz ~N - 46 V; /6 Hz 3~ 2 V; /6 Hz ~N - 46 V; /6 Hz 3~ Cooling capacity to DIN 3168 L35 L35 W W W W L35 L 1 W 1 W 1 W 1 W Power Consumption L35 L35 16 W 1 W 16 W 1 W Max. air volume flow Ambient air circuit 7 m³/h 7 m³/h 7 m³/h 7 m³/h Cabinet air circuit 5 m³/h 5 m³/h 5 m³/h 5 m³/h Rated current 7 A 3,7 A 7 A 3,7 A Starting current 33,5 A A 33,5 A A Pre-Fuse T 1 A 3 x 6 A 1 A 3 x 6 A Operating temperature range + C to +55 C + C to +55 C + C to +55 C + C to +55 C Weight 63 kg 63 kg 63 kg 63 kg Compressor Rotary piston Rotary piston Rotary piston Rotary piston Connection Connection terminals Connection terminals Connection terminals Connection terminals Other input voltage options available upon request. V-3phase units do not need additional MP. 27

28 Thermoelectric cooler Thermoelectric cooling unit ready for connection Features: Material: plastic parts in PC/ABS alloy. All parts selfextinguishing, according to UL 94V- Color: RAL 735 and RAL 732 Protection degree: IP55 Electrical connection: by 4 pole Cage Clamp connector Sealing: permanent sealing gasket in closed cell foam polyethylene Thermoelectric cooler, cooling power W Order code ID-EP--1 H 3 Dimensions mm W 31 D 188 (1 mm outside of the cabinet) Cooling power W Heating power W Voltage 24 V DC Rated voltage range V DC Rated current 9,2 A Max current 11,1 A Rated Temp. Range - C to +7 C Weight 12 kg Recommended accessories: Programmable thermostat and reverse starter (order code ID-EP-REG) is suitable for controlling cooling/heating depending on measured temperature. 28

29 Technical and assembly drawings WALL-MOUNTED COOLING UNITS SLIM 3 W (AC-WM3-3-4xxx) 8 Characteristics Ø Actual cooling capacity (W) Condenser air-intake temperature ( C) Internal mounting 27 External mounting Evaporator air-intake temperature ( C) Ø WALL-MOUNTED COOLING UNITS SLIM W (AC-WM3-4-4xxx) 8 Characteristics 71 Ø7 Actual cooling capacity (W) Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Ø Internal mounting External mounting 3 All dimensions are in mm. 29

30 WALL-MOUNTED COOLING UNITS SLIM W HORIZONTAL (AC-WM3-4-4xxH) 8 Characteristics Actual cooling capacity (W) Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) 18 Ø Ø Internal mounting 5 External mounting WALL-MOUNTED COOLING UNITS SLIM W (AC-WM3-5-4xxx) 8 Characteristics Actual cooling capacity (W) Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Ø Ø Internal mounting 3 External mounting All dimensions are in mm

31 WALL-MOUNTED COOLING UNITS SLIM 8 W (AC-WM3-8-xxxx) 1 Characteristics Actual cooling capacity (W) Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Ø Internal mounting External mounting WALL-MOUNTED COOLING UNITS SLIM 11 W (AC-WM3-11-xxxx) Characteristics Actual cooling capacity (W) Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Ø Internal mounting External mounting All dimensions are in mm

32 A WALL-MOUNTED COOLING UNITS SLIM 1 W (AC-WM3-15-xxxx) Characteristics Actual cooling capacity (W) Evaporator air-intake temperature ( C) Ø Condenser air-intake temperature ( C) Internal mounting External mounting WALL-MOUNTED COOLING UNITS SLIM W (AC-WM3--xxxx) Characteristics 3 Semi-flush mounting Actual cooling capacity (W) Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Internal mounting External mounting Ø5x Ø8x All dimensions are in mm

33 WALL-MOUNTED COOLING UNITS SLIM 26 W (AC-WM3-26-xxxx) Actual cooling capacity (W) 3 1 Characteristics Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Semi-flush mounting Internal mounting External mounting Ø5x Ø8x All dimensions are in mm. 33

34 TOP-MOUNTED COOLING UNITS W (AC-TM3-2-4xxx) Actual cooling capacity (W) Characteristics Condenser air-intake temperature ( C) TOP-MOUNTED COOLING UNITS 4 W (AC-TM3-4-4xxx) Evaporator air-intake temperature ( C) Actual cooling capacity (W) Characteristics Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Evaporator air-intake temperature ( C) Actual cooling capacity (W) Characteristics Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) 15, , ,4 236, , ,5 TOP-MOUNTED COOLING UNITS 11 W (AC-TM3-11-xxxx) Actual cooling capacity (W) Characteristics Condenser air-intake temperature ( C) Evaporator air-intake temperature ( C) Actual cooling capacity (W) Characteristics 369, , All dimensions are in mm. Condenser air-intake temperature ( C) Ø ,5 Evaporator air-intake temperature ( C) Actual cooling capacity (W) ,5 34

35 TOP-MOUNTED COOLING UNITS 1 AND W(AC-TM3-15-xxxx a AC-TM3-- xxxx) Evaporator air-intake temperature ( C) Actual cooling capacity (W) Characteristics Evaporator air-intake temperature ( C) Characteristics Condenser air-intake temperature ( C) Condenser air-intake temperature ( C) Actual cooling capacity (W) Evaporator air-intake temperature ( C) 15, ,4 236, , ,5 7 15, ,9 6,5 Ø , ,5 All dimensions are in mm. 35

36 CONTEG, spol. s r.o. Czech Republic Headquarters: Na Vítězné pláni 1719/4 1 Prague 4 Tel.: Fax: Production plant in the Czech Republic: K Silu Pelhřimov Tel.: Fax: conteg@conteg.com Local Branches/Offices Austria: Benelux: Eastern Europe / Nordics: France, Maghreb: Germany / Switzerland: India: Middle East: Russia, CIS: Ver Although this catalog was prepared, produced and checked with the best care, Conteg, spol. s r.o. cannot accept any liability for omissions or errors in this publication. Due to the continuous development and progress, Conteg, spol. s r.o. also reserves the right to change details and technical specifications of the products shown in this catalogue. Such changes along with eventual errors or printing errata shall not constitute grounds for compensation.