E4 1-1/2" Bolted Metallic Pumps Specifications and Performance

Size: px

Start display at page:

Download "E4 1-1/2" Bolted Metallic Pumps Specifications and Performance"

Gervais Hensley
5 years ago
Views:

E4 1-1/2" Bolted Metallic Pumps Specifications and Performance SPECIFICATIONS E4 PERFORMANCE Determined by actual flow meter tests. E4 FLOW RATE (Adjustable).

1 E4 1-1/2" Bolted Metallic Pumps Specifications and Performance SPECIFICATIONS E4 PERFORMANCE Determined by actual flow meter tests. E4 FLOW RATE (Adjustable) gpm (0-275 lpm) PORT SIZE Inlet and Outlet " ANSI/DIN AIR INLET " NPT AIR EXHAUST " NPT SUCTION LIFT... 15' Dry/25' Wet (4.57m/7.62m) Teflon... 10' Dry/20' Wet (3.05m/6.09m) MAX. PARTICLE SIZE (Dia.) "(4.76mm) SHIPPING WEIGHTS Stainless Steel lbs (29.5 kg) Hastelloy C lbs (30.8 kg) Meters Feet Discharge Head in PSI Displacement Per Stroke, 0.31 Gal. (1.17 L) AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI 100 SCFM M 90 3 /HR Capacity in U.S. Gallons Per Minute Capacity in Liters Per Minute NOTE: For E4 pumps fitted with Teflon diaphragms, reduce water discharge figures by 20%. Suction lift is reduced to 10' (3.05m) dry and 20' (6.10m) wet. CAUTION: Do not exceed 125 psig (8.5 bars) air supply or liquid pressure. Horizontal Discharge Model Available. DIMENSIONS Consult factory for certified drawings. E4 40mm ANSI/DIN Flange 1.50" 150# Flange Discharge [326] [267] 5.92 [150] [514].50" Female NPT Air Inlet 40mm ANSI/DIN Flange 1.50" 150# Flange Discharge [288] 1.50 [38] 0.44 [11] Slot Width 8.78 [223] [335] [261] 3.12 [79] inches [mm] 2.81 [72] 7.00 [178] 5.94 [151] JH Process Equipment Inc. 617 Jeffers Circle, Exton, PA

2 Operating Instructions E4 PLASTIC E4 METALLIC OI-E4-P/K/S/H, 9/05 E4 Elima-Matic Bolted Pumps MODELS: E4P E4K E4S E4H JH Process Equipment Inc. 617 Jeffers Circle, Exton, PA

11 Versa-Matic Pump Company Model E4, Elima-Matic Bolted Series (revised 2/08) Pump Model Number Item Description Qty E4P E4K E4S E4H 1 Elima-Matic Center Block 1 P31-401ASY 2 E4 Valve Assembly (items 3 thru 10) 1 P E4 Valve Body 1 P (Not sold separately) 4 Spool 1 P a Glyd-Ring Assembly 3 P50-104C 5 Gasket, End Cap 2 P Gasket, Valve 1 P End Cap 2 P Cap Screw 14 S Stop Nut 2 P Retainer, Pilot Shaft 2 P Space, Pilot Shaft 2 P O-Ring, Pilot Valve 6 P Ring, Pilot Valve 5 P Pilot Shaft 1 P Main Shaft 1 P (Rubber and PTFE IP fitted) / P (PTFE TF and TX fitted) 16 Bushing O-Ring 2 P Air Chamber Gasket 2 P Bushing 1 P * Shaft Stud 2 V161F (not required with Teflon) N/A 20 Inner Diaphragm Plate (Rubber & XL Fitted) 2 E414 V161C 20A* Inner Diaphragm Plate (PTFE Fitted only) 2 V161TI*** 21 Outer Diaphragm Plate 2 PE413 KE413 SVB161 HVB161 21A* Outer Diaphragm Plate (PTFE Fitted) 2 PE413TO*** KE413TO*** SVB161TO*** HVB161TO*** 22 Diaphragm (See below for material selection) 2 V163xx 22A Back-Up Diaphragm 2 V163TFB (Hytrel) or V163TFB-1 (Neoprene) 23 Air Chamber 2 E Air Chamber Bolt 8 P Valve Ball 4 V171xx (see list below) 26 Valve Seat 4 E408xx (see list below) V170xx (see list below) 27 Valve Seat O-Ring (see below**) 8 E412TES V170T 28 Water Chamber 2 PE404 KE404 E404S E404H 29 Water Chamber Bolts 20 SV189D SV185A 30 Flat Washers 32 SV189C 31 Water Chamber Nuts 32 N/A SV185B 32 Manifold Tee 2 PE411 KE411 N/A 33 Inlet Manifold Elbow 2 PE409F KE409F N/A 33A Inlet Manifold 1 N/A E467S E467H 34 Discharge Manifold Elbow 2 PE409 KE409 N/A 34A Discharge Manifold 1 N/A E466S E466H 35 Manifold Tee O-Ring 4 E413xx (see list below) N/A 36 Manifold Bolts 12 SV189D 37 Detent Pins 8 E Air Exhaust Muffler 1 VTM-6 Diaphragm Part Numbers & Material V163N, Neoprene V163BN, Buna-N V163ND, Nordel V163VT, Viton V163FG, Hytrel V163TX, One piece PTFE diaphragm (no back-up required) V163F, IP PTFE (No plates of back-up required) V163XL, TPEXL V163TF * Not shown in exploded view. ** E412TES valve seat o-ring is used only with E408P & E408K valve seats. *** V163F PTFE IP Diaphragm do not require external plates V170T valve seat o-ring is used only with SV170 & HV170 valve seats. Valve Ball Part Numbers & Material V171N, Neoprene V171BN, Buna-N V171ND, Nordel V171VT, Viton V171SS, Stainless Steel V171TF, PTFE PTFE V171TPEFG, Hytrel V171TPEXL, XL Valve Seat Part Numbers & Material E408BN, Buna-N E408N, Neoprene E408D, Nordel E408VT, Viton E408FG, Hytrel E408XL, TPEXL E408P, Polypropylene E408K, Kynar PVDF V170N, Neoprene V170BN, Buna-N V170VT, Viton V170ND, Nordel V170TPEFG, Hytrel V170TPEXL, Teflon XL SV170, Stainless Steel HV170, Hastelloy Manifold Tee O-Ring Part Numbers and Materials E413BN, Buna-N E413N, Neoprene E413ND, Nordel E413VT, Viton E413XL, XL E413FG, FG E413TES, PTFE Encaps Silicone JH Process Equipment Inc. 617 Jeffers Circle, Exton, PA

JH Process Equipment Inc. 617 Jeffers Circle, Exton, PA 19341 610-903-0900 www.jhprocess.

13 JH Process Equipment Inc. 617 Jeffers Circle, Exton, PA JH Process Equipment Inc. 617 Jeffers Circle, Exton, PA

E1 Bolted Pump Specifications End Ported Dimensions

E1 Bolted Pump Specifications End Ported Dimensions OPERATING INSTRUCTIONS 1" Elima-Matic Bolted Pump Characteristics Adjustable Flow Rate Rugged Diaphragms. 0 to 8.5 m 3 /hr (0-37 gpm) Teflon Diaphragms...0 to 6.8 m 3 /hr (0-30 gpm) Pump Connections Suction....1