HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K

Size: px

Start display at page:

Download "HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K"

Dominic Snow
5 years ago
Views:

1 HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K

HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K Similar Image Rugged, powerful turbopump with a pumping speed of up to 260 l/s für N 2 DN 100 ISO-K flange Drive electronics TC 110 and

Bearing HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K Hybrid Compression ratio for Ar > 1 10 11 Compression ratio for H 2 9 10 5 Compression ratio for He > 1 10 8 Compression ratio

2 HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K Similar Image Rugged, powerful turbopump with a pumping speed of up to 260 l/s für N 2 DN 100 ISO-K flange Drive electronics TC 110 and power supply OPS 100 integrated Ideal for analytical and industrial applications For installation in any orientation Extensive accessories expand the range of applications Dimensions Technical Data Bearing HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K Hybrid Compression ratio for Ar > Compression ratio for H Compression ratio for He > Compression ratio for N 2 > Cooling method, optional Cooling method, standard Electronic drive unit with TC 110 Flange (in) Air Air DN 100 ISO-K Flange (out) DN 16 ISO-KF/G ¼" Fore-vacuum max. for N 2 11 hpa 8.25 Torr 11 mbar Page 2

3 Technical Data Gas throughput at full rotational speed for Ar Gas throughput at full rotational speed for H 2 Gas throughput at full rotational speed for He Gas throughput at full rotational speed for N 2 Interface, extended Interfaces Mounting orientation Operating voltage: V DC Permissible magnetic field max. Protection category Pumping speed for Ar Pumping speed for H 2 Pumping speed for He HiPace 300 with TC 110 and power supply OPS 100, DN 100 ISO-K 0.5 hpa l/s 5 hpa l/s 1.8 hpa l/s 0.9 hpa l/s Profibus, DeviceNet, E74 RS-485, Remote in any orientation 24 (± 5 %) V DC 5.5 mt IP l/s 220 l/s 255 l/s Pumping speed for N l/s Rotation speed ± 2 % 60,000 rpm 60,000 min -1 Run-up time Sound pressure level Ultimate pressure according to PNEUROP 4 min 50 db(a) Venting connection G 1/8" Weight < hpa < Torr < mbar 6.9 kg lb Order number HiPace 300 PM P Page 3

4 Accessories Mains cables Mains cable 230 V AC, CEE 7/7 to C13, 3 m P ZA Mains cable 115 V AC, NEMA 5-15 to C13, 3 m P ZE Mains cable 208 V AC, NEMA 6-15 to C13, 3 m P ZF RS-485 accessories Y-Connector M12 to RS-485 P USB converter to RS-485 interface PM T Connector M12 to RS-485 PM X Termination resistor for RS-485 PT T Power separator for RS-485 PT T Vibration damper Vibration damper for HiPace 300/400, DN 100 ISO-K/F PM X Centering ring with multifunctional coating Centering ring with multifunction coating, DN 100 ISO-K/-F PM U Centering ring with multifunctional coating, including splinter shield Centering ring with multifunction coating and integrated splinter shield, DN 100 ISO-K/-F PM U Centering ring with multifunctional coating, including protection screen Centering ring with multifunction coating and integrated protection screen, DN 100 ISO-K/-F PM U Mounting kits for HiPace, including coated centering ring and bracket screws Mounting kit for HiPace 300 with DN 100 ISO-K, including coated centering ring and bracket screws PM T Mounting kits for HiPace, including coated centering ring, splinter shield and bracket screws Mounting kit for HiPace 300, DN 100 ISO-K, including coated centering ring, splinter shield and bracket screws PM T Mounting kits for HiPace, including coated centering ring, protection screen and bracket screws Mounting kit for HiPace 300, DN 100 ISO-K, including coated centering ring, protection screen and bracket screws PM T Venting accessory with small flange, G 1/8", hoses, air drier Screw-on flange, DN 16 ISO-KF, G 1/8" PM T Push-in fitting for 6 mm hose, G 1/8" PM T Push-in fitting for 8 mm hose, G 1/8" PM T Hose nozzle for 9 mm hose, G 1/8" PM T Banjo fitting PM T Screw-in flange, DN 10 ISO-KF, G 1/8" PM T Banjo fitting, small PM T TTV 001, dryer for venting turbopumps PM Z Control and display units HPU 001, Handheld Programming Unit PM T DCU 002, Display Control Unit PM T Accessory for DCU/HPU Accessories package for HPU 001/PC PM T Accessories RS-485 Interface cable, M12 m straight/m12 m straight, 3 m PM T Page 4

5 Accessories Relay boxes suitable for TC 110, TC 400 and TCP 350 Relay box for backing pump, single phase 20 A for TC 110/120 and TCP 350, M8 plug PM T Adapters/connections TC 110 TCS 11, adapter for TC 110/120 with RS-485 interface PM U TCS 12, adapter for TC 110/120 with interface RS-485, 4 accessory ports and coupling set PM U TCS 13, adapter for TC 110/120 with interface RS-485, 2 accessory ports and coupling set PM U Adapter and control cables Control cable for valve PM T HiPace - ACP connection cable PM X Interface cables Interface cable, M12 m straight/ M12 m angled 0.7 m PM T Shielded relay boxes suitable for TC 110/TC 400 with PB, TC 1200 and TM 700 Relay box, shielded, for backing pumps, 1- phase 7A for TC 110/120 and TCP 350, plug M8 PM X Fore-vacuum safety valves TVV 001 fore-vacuum safety valve, 230 V AC PM Z TVV 001 fore-vacuum safety valve, 115 V AC PM Z Venting valve (normally closed) Venting valve, shielded, 24 V DC, G 1/8", for connection to TC 110/120 PM Z Air coolings (unshielded) Air cooling for HiPace 300/450 with TC 110/120 PM Z Air coolings 115/230 V Air cooling for HiPace 300/450, 115 V PM Z Air cooling for HiPace 300/450, 230 V PM Z Sealing gas valve, shielded (normally closed) Sealing gas valve, shielded for HiPace 300 with TC 110/120 PM Z Sealing gas throttle Sealing gas throttle for HiPace 300 PM Z Power failure venting units (normally open) Shielded power failure venting unit, 24 V DC, G 1/8", for connection to TC 110/120 PM Z Pressure Sensors TIC 010, Adapter for two sensors PT R RPT 010, Digital Piezo/Pirani Sensor PT R IKT 010, Digital Cold Cathode Sensor, low current PT R IKT 011, Digital Cold Cathode Sensor, high current PT R centering ring, Hexagon bolts collar flange, coated centering ring, hexagon bolts PM T centering ring with splinter shield, hexagon bolts collar flange, coated centering ring with splinter shield, hexagon bolts PM T Page 5

6 Accessories centering ring with protection screen, hexagon bolts collar flange, coated centering ring with protection screen, hexagon bolts PM T DN ISO-K/-F Mounting kit with collar flange, coated centering ring, stud screws collar flange, coated centering ring, stud screws PM T centering ring with splinter shield, stud screws collar flange, coated centering ring with splinter shield, stud screws PM T centering ring with protection screen, stud screws collar flange, coated centering ring with protection screen, stud screws PM T Page 6

7 Vacuum solutions from a single source Pfeiffer Vacuum stands for innovative and custom vacuum solutions worldwide, technological perfection, competent advice and reliable service. Complete range of products From a single component to complex systems: We are the only supplier of vacuum technology that provides a complete product portfolio. Competence in theory and practice Benefit from our know-how and our portfolio of training opportunities! We support you with your plant layout and provide first-class on-site service worldwide. Are you looking for a perfect vacuum solution? Please contact us: Pfeiffer Vacuum GmbH Headquarters Germany T info@pfeiffer-vacuum.de All data subject to change without prior notice.

HiPace 300 Plus with TC 110, DN 100 ISO-K

HiPace 300 Plus with TC 110, DN 100 ISO-K HiPace 300 Plus with TC 110, DN 100 ISO-K Compact yet powerful turbopump with a pumping speed of up to 260 l/s for N 2 Integrated TC 110 drive electronics Low