GDS. Pole Mounted Disconnectors Up to 52kV

Size: px

Start display at page:

Download "GDS. Pole Mounted Disconnectors Up to 52kV"

Bennett Eaton
5 years ago
Views:

1 GDS Pole Mounted Disconnectors Up to 52kV

General Information The switch for every application The GDS range is a modern switch system with components for different isolation and switching applications in overheadlines and substations.

The base in the switch system is the phase element. To this component can different accessories be added for having the requested disconnector or switch specification.

Different insulator alternatives The GDS can be supplied with a wide range of different insulators in order to meet different isolation philosofies, enviromental conditions and different standards.

2 General Information The switch for every application The GDS range is a modern switch system with components for different isolation and switching applications in overheadlines and substations. The system is characterised by a high degree of flexibility in order to meet different national standards as well as to meet various customer specifications. The base in the switch system is the phase element. To this component can different accessories be added for having the requested disconnector or switch specification. The switch can be installed in all different pole types, wood, concrete, steel poles or substation structures. Different insulator alternatives The GDS can be supplied with a wide range of different insulators in order to meet different isolation philosofies, enviromental conditions and different standards. The components of the switch system allow for different insulators to be used due to the design with parallel insulators without affecting the base and contact components. As standard can porcelain, outdoor epoxy resin and silicon rubber insulators be offerd. Beside the standard material can also insulators according to customer specifications be used. 2

3 Technical characteristics Charctersistic Value Applicable standards IEC , IEC voltage 24kV 36kV Impulse withstand voltage Phase-Earth 125kV 170kV Impulse withstand voltage over isolating distance 145kV 195kV Power frequency voltage 1 min wet, Phase-Earth 50kV 70kV Power frequency voltage 1 min wet, over isolating distance 60kV 80kV frequency 50-60Hz 50-60Hz current *) 630A 630A Short time current 25kA 25kA Duration of short time current 3 sec. 3 sec Peak withstand current 62,5kA 62,5kA Making capacity 5kA 3kA Interupting capacity with the loadbreak heads of mainly active load at rated voltage and cosφ=0,7 Interupting capacity with the loadbreak heads of mainly active load at rated voltage and cosφ=0,15 capacitive Interupting capacity with the loadbreak heads of mainly active load at rated voltage and cosφ=0,15 reactive Ringinterupting capacity with the loadbreak heads of mainly active load at rated voltage and cosφ=0,3 reactive Interupting capacity with breaking whip of mainly active load at rated voltage and cosφ=0,7 Interupting capacity with breaking whip of cable and line changing currents at rated voltage 630A 25A 16A 400A 25A 15A 400A 16A 4A 400A 16A 10A Permissible ice load Mechanical endurance Temperature range Insulator material Insulator creepage distance Up to 20mm >2000 operations -50 o C to +50 o C Porcelain,Silicon rubber, Outddoor epoxy resin Various for different insulators *) 630A is standard value. Alternative current ratings are 800A, 1250A and 2000A. 3

2862003 GP2G Outdoor epoxy resin 24kV 630A 30

Outdoor epoxy resin 36kV 630A 33 A7332 GP2S

Porcelain 52kV 630A 60 A8268 GDSS26/52-6600

4 Phase elements No.** Insulator material voltage current Weight, kg GP2G Outdoor epoxy resin 24kV 630A 30 A6737 GP2P Porcelain 24kV 630A 33 A7513 GP2G4 Outdoor epoxy resin 36kV 630A 33 A7332 GP2S Silicon rubber 36kV 630A 36 A7598 GDS36/ Porcelain 52kV 630A 60 A8268 GDSS26/ Silicon rubber 52kV 630A 54 *) 630A is the standard current rating. Other rated currents available on request **) Numbers are for sets of three units GP2G GP2P GP2G4 GP2S GDS36/ GDSS36/

Loadbreaking accessories Breaking whip No.

5 Loadbreaking accessories Breaking whip No.* voltage For Phase element type Weight, kg GBGK kV GP2G,GP2P,GP2S,GP2G4 2,5 GBGK1 Loadbreak head No.* voltage For Phase element type Weight, kg A6733 GLBD kV GP2G,GP2P,GP2S,GP2G4 12 A GLBD2 36kV GP2S, GP2G4, GDS36/ , GDSS36/ GLBD *) Set of three 5

Connecting accessories Extension part No.

epoxy resin 24kV 630A GP2G 18 A6729-2 GF2P Porcelain 24kV 630A GP2P 20 A6729-5 GF2G4 Outdoor

6 Connecting accessories Extension part No.** Insulator material voltage current For Phase element type Weight, kg GF2G Outdoor epoxy resin 24kV 630A GP2G 18 A GF2P Porcelain 24kV 630A GP2P 20 A GF2G4 Outdoor epoxy resin 36kV 630A GP2G GF2S Silicon rubber 36kV 630A GP2S 19 GF2G Extension Part for integrated surge arrester No.** Height of surge arrester current For Phase element type Weight, kg GF2PI* 630A GF2PI1* 630A **) Surge arrester is not included in articel number GP2G,GP2P, GP2S GP2G,GP2P, GP2S GF2PI 6

7 Connecting accessories Cable connection Part No.** Insulator material voltage current For Phase element type Weight, kg GK2G Outddor epoxy resin 24kV 630A GP2G 22 A GK2P Porcelain 24kV 630A GP2P 23 A GK2G4 Outdoor epoxy resin 36kV 630A GP2G GK2S Silicon rubber 36kV 630A GP2S 23 GK2G Cable connection Part for integrated surge arrester No.** Height of surge arrester current For Phase element type Weight, kg GK2PI* 630A GP2G,GP2P, GP2S 14 **) Surge arrester is not included in articel number GK2PI 7

GS3P Porcelain 24kV 80A GP2P 22 2862035 GS3S Silicon rubber 24kV 80A GP2S 22 GS3G assembled on GP2G For fuses with dimensions

8 Fuse combinations For RP33 type fuse tubes No.** Insulator material voltage current For Phase element type Weight, kg GS3G Outddor epoxy resin 24kV 80A GP2G 21 A GS3P Porcelain 24kV 80A GP2P GS3S Silicon rubber 24kV 80A GP2S 22 GS3G assembled on GP2G For fuses with dimensions according to DIN No.** Insulator material voltage current For Phase element type Weight, kg GS5RG Outddor epoxy resin 24kV 20A GP2G GS5RS Silicon rubber 24kV 20A GP2S 24 GS5Rs assembled on GP2S 8

9 Connecting accessories Hinge terminal bar and connection bars No. Weight, kg GPK A6530* GPK 3 A7997 CPAU 0,2 A7335 CSP 0,4 Cable connection bar CPAU CSP No. Weight, kg A6847* GCCB 2,4 GCCB Connecting clamps No.* Conductor crossection Weight, kg GKG16 Al mm 2 0,8 EKN GKG43 Al mm GKG44 Al mm 2 Cu 10-95mm 2 0,8 A3037 EKN1 Cu mm 2 0,4 GKG *) number is for set of three 9

10 Overvoltage protection accessories Spark gaps No.** Placement For Phase element type Weight, kg GHG Horizontal over support insulator GP2G, GP2P 0,5 A6951 GSG1 Horizontal with crossarm bracket GP2G,GP2P, GP2S,GP2G4 10,5 GHG GSG1 10

11 Overvoltage protection accessories Surge arrester brackets No.* Placement Weight, kg GSAB Attached to base of phaseelement or accessorie GVP Together with crossarm clamp GRF 3 *) number is for set of three GSAB GSAB on cable connection part GVP on crossarm clamp GRF GSAB on phase element GVP 11

side of phase element GP2S,GP2G4 16 A8062 EB4 Rocking contact side of phase element GP2G, GP2P 15 A8034-1 GIL6 Mechanical interlock

types 1 A6906 GJP Earth contact for rocking insulator.

12 Earthing accessories No.** Placement For Phase element type Weight, kg A7681 EB2 Fixed contact side of phase element GP2G, GP2P 15 A7998 EB3 Fixed contact side of phase element GP2S,GP2G4 16 A8062 EB4 Rocking contact side of phase element GP2G, GP2P 15 A GIL6 Mechanical interlock when earth blades installed on both sides of phase element - 2 A3500*) JOPO Earth bolt for connection of portable earthing tool All types 1 A6906 GJP Earth contact for rocking insulator. When disconnector opens, rocking insulator gets earth connected automatically GP2P,GP2G,GP2S 7 *) number is for set of 6 pcs **) numbers include three earth blades with mechanical interlock. Associated equipment such as phase coupling tubes, operating rods, operating handles must be ordered separately. EB4 EB2 GJK JOPO 12

Handoperating Mechanisms GHM Operating handles No.

On-Earth Off 4 A6941/AU GHM/AU** ON-OFF 4 A8215 GHMEI*** I-0 10 *) The GHM2-J are

leads between the pole bracket and handle ***) Handoperating mechanism with

When ordering indicate voltage for the locking magnet GHMEI Auxillary contacts and

Comment Weight A7460 GHMSK 1NO+1NC contact 0,4 A8216 GHMDI 1NO+1NC x2 1 A7459 GHMIV*

13 Handoperating Mechanisms GHM Operating handles No. Indication label Weight A6731 GHM I-0 4 A6941 GHM2 ON-OFF 4 A6941-J GHM2-J* Earth On-Earth Off 4 A6941/AU GHM/AU** ON-OFF 4 A8215 GHMEI*** I-0 10 *) The GHM2-J are assembled for reversed operation direction **) The A6941/AU has flexible copper leads between the pole bracket and handle ***) Handoperating mechanism with electrical interlock. When ordering indicate voltage for the locking magnet GHMEI Auxillary contacts and accessories No. Comment Weight A7460 GHMSK 1NO+1NC contact 0,4 A8216 GHMDI 1NO+1NC x2 1 A7459 GHMIV* Interlocking wheel with one slot 0,2 A GHMIV-1* Interlocking wheel with double slots 0,2 *) Castell interlocks are not included with the interlocking wheel, but can be supplied on request GHMSK Installed on GHM GHMDI Installed on GHM GHMIV Installed on GHM 13

14 Handoperating Mechanisms Hookstick operating mechanism GHS1 No. Weight A7380 GHS1 8 The GHS1 has a automatic resetting of the latchpin when operated. Accessories No. Comment Weight A8327 GHSSL Stickoperated safety lock attachment 0,5 14

Operating rods with accessories Operating rods No.

telescopically adjustable length Complete rod set with upper and lower rod.

operating rod with fork for connection to the operating lever GMR3 3250

telescopically length adjustable section GMR5 2000-3800 A7373 2862034

operating mechanism Extension rod with coupling socket for operating rods.

operating rod for substation disconnectors GMR17 3500-5300 GMR6 Operating rod

Suitable for crossarm Weight A6734 GMK Operating lever 1 A7635 GMK5 Operating

15 Operating rods with accessories Operating rods No. Description Length,mm A7435 Complete rod set with upper and lower rod.telescopically adjustable length Complete rod set with upper and lower rod.telescopically adjustable GMR GMR A Upper operating rod with fork for connection to the operating lever GMR A Intermediate operating rod GMR A Lower operating rod with telescopically length adjustable section GMR A Telescopical rod set with forks in both ends for connection to hookstick operating mechanism Extension rod with coupling socket for operating rods. Including one extra rod guide GMR GFR A8174 Complete operating rod for substation disconnectors GMR GMR6 Operating rod accessories No. Suitable for crossarm Weight A6734 GMK Operating lever 1 A7635 GMK5 Operating lever for earth blades 1 A6742 GSI Rod insulator up to 24kV 0,5 A7550 GSI2 Rod insulator up to 52kV 1,3 A7354 GRC Rod coupling socket 0,3 A6743 GSS Rod guide 0,7 A7944 GSS2 Rod guide 2,5 GMK GMK5 GSI GRC GSS GSS2 15

100x100x2500 31kg A8000 GFLR24 80x80x2400 22kg Note: The GFLR24 Crossarm have no holes drilled Crossarm

Suitable for crossarm Weight 5821919 GFLRME GFLR1&GFLR2 4 A8139-1 GFLRME-1 GFLR21 4 No.

16 Pole assembling crossarms Crossarms No. Dimensions Weight GFLR1 80x80x kg GFLR2 100x100x kg A GFLR21 100x100x kg A8000 GFLR24 80x80x kg Note: The GFLR24 Crossarm have no holes drilled Crossarm assembling parts For single-pole installation No. Suitable for crossarm Weight GFLRME GFLR1&GFLR2 4 A GFLRME-1 GFLR21 4 No. Suitable for crossarm Weight A7962 PBRC GFLR1,GFLR2, GFLR21, GFLR24 7 Note: The PBRC pole bracket should not be used when conductors are terminated to the crossarm. For H-pole installation No. Suitable for crossarm Weight GFLRMP GFLR1,GFLR2, GFLR

17 Crossarm assembling accessories Crossarm clamps No. Suitable for crossarms Weight GRF1 Box tubes and C-channels with max dimensions100x130mm (WxH) 0,6 kg GRF2 Box tubes and C-channels with max dimensions130x180mm (WxH) 0,7 kg A6915 GRF3 Angle channels with max dimensions 130x180 (WxH) 0,7 kg 17

18 Mast Head Loadbreaklswitch 24kV,630A Handle operation, epoxy resin insulators Component Qty Remark Phase element GP2G 1 Hinge Terminal bar GPK 1 Loadbreak head GLBD1 1 Phase coupling tube GMA16 1 Crossarm clamps GRF1 3 Operating lever GMK 1 Operating tube GMR2 1 Assembling crossarm GFLR1 1 Operating handle GHM 1 Rod guide GSS 2 Rod insulator GSI 1 Ordering number for the complete unit Crossarm assembling parts (to be ordered separately) A7535 Component Qty Remark Single pole assembling parts GFLRME 1 number H-pole assembling parts GFLRMP 1 number (pole distance 2000mm c/c) 18

Mast Head installed disconnector 24kV,630A With Hookstick operation, epoxy resin insulators Component Qty Remark Phase element GP2G 1 Hinge Terminal bar GPK 1 Breaking whip GBGK1 1 Phase coupling

19 Mast Head installed disconnector 24kV,630A With Hookstick operation, epoxy resin insulators Component Qty Remark Phase element GP2G 1 Hinge Terminal bar GPK 1 Breaking whip GBGK1 1 Phase coupling tube GMA20 1 Crossarm clamps GRF6 3 Operating lever GMK 1 Pole bracket PBRC 1 Bolts for pole not included Operating tube GMR16 1 Assembling crossarm GMA24 1 Telescopical oåperating rod GMR17 1 Hookstick operating mechanism GHS1 1 Resin operating tube - 1 Not supplied by Gevea Ordering number for the complete unit Ordering number for the complete unit, but with assembled loadbreakhaeds A8176 A8176/GLBD1 19

Vertical disconnector 24kV,630A With earth blades, epoxy resin insulators Component Qty Remark Phase element GP2G 1 Earth blade set EB4 1 Include mechanical interlock Breaking whip GBGK1 1 Phase

20 Vertical disconnector 24kV,630A With earth blades, epoxy resin insulators Component Qty Remark Phase element GP2G 1 Earth blade set EB4 1 Include mechanical interlock Breaking whip GBGK1 1 Phase coupling tube GMA16 2 Crossarm clamps GRF1 3 Operating lever GMK 1 Operating lever GMK5 1 Operating tube GMR2 2 Rod coupling socket GRC 2 Rod guide GSS 4 Operating handle for disconnector GHM 1 Operating handle for earth blade GHM2-J 1 Ordering number for the complete unit excluding assembling crossarm Ordering number for the complete unit including assembling crossarm and pole attacment accessories A A

Masthead installed disconnector 24kV,630A

21 Masthead installed disconnector 24kV,630A assembled on square concrete pole 200x200mm Ordering No. A8099 A8099/LB Description Complete unit including crossarm and operating mechanism. With assembled breaking whips Complete unit including crossarm and operating mechanism. With assembled loadbreak head 21

With assembled breaking whips Complete unit

22 Masthead installed disconnector 24kV,630A assembled in steel pole Ordering No. A8184/GBGK1 A8184 Description Complete unit including crossarm and operating mechanism. With assembled breaking whips Complete unit including crossarm and operating mechanism. With assembled loadbreak head 22

Substation installed loadbreakswitch 36kV,630A With earthblades, epoxy resin insulators Component Qty Remark Phase element GP2G4 1 Extension part GF2G4 1 Loadbreak head GLBD1 1 Phase coupling tube

23 Substation installed loadbreakswitch 36kV,630A With earthblades, epoxy resin insulators Component Qty Remark Phase element GP2G4 1 Extension part GF2G4 1 Loadbreak head GLBD1 1 Phase coupling tube GMA25 2 Crossarm clamps GRF1 6 Operating lever GMK 1 For disconnector blade Operating lever GMK5 1 For eathblade Operating tube GMR17 2 Operating handle GHM2 1 For disconnector blade Operating handle GHM2-J 1 For earthblade Earth blade EB4 1 Includes mechanical interlock Connection palm CPAU 6 Ordering number for the complete unit A

24 AB GEVEA Box Tlf S Norrköping Fax Sweden E -mail. Info@gevea.se 24 Version Eng

Power IT Pole Mounted Switch Disconnector, NPS. 630 A, up to 36 kv

Power IT Pole Mounted Switch Disconnector, NPS 60 A, up to 6 kv NPS Pole Mounted Switch Disconnectors 60 A up to 6 kv Index Description... Selection table... 5 Technical data and ordering information Rocking