Engineering Data Pack
|
|
- Karin Shepherd
- 5 years ago
- Views:
Transcription
1 Engineering Data Pack TR Series Pump Version 1.4 Excellence at work. Excellence in life.
2 Table of Contents Product Overview 3 TR Series Typical Layout 3 General Pump Operation 3 Pump Mounting Dimensions for TRA Model Pumps 4 Pump Mounting Dimensions for TRC Model Pumps 5 Pump Mounting Dimensions for TRL Model Pumps 6 Pump Mounting Dimensions for TRS Model Pumps 7 Cover Mounting Dimensions for (TRC & TRS) Models 8 Cover Mounting Dimensions for TRL Models 9 Spring Data Chart - TRA Models TRA Pump Dimensions 11 Spring Data Chart - TRC Models 12 TRC Pump Dimensions 13 Spring Data Chart - TRC Pumps (Precompressed Spring Assemblies) 14 TRC Pump Dimensions (Precompressed Spring Assemblies) 15 Spring Data Chart - TRL Models 16 TRL Pump Dimensions 17 Spring Data Chart - TRL Pumps (Precompressed Spring Assemblies) 18 TRL Pump Dimensions (Precompressed Spring Assemblies) 19 Spring Data Chart for TRS Models TRS Pump Dimensions 21 Version 1.4 Page 2 of 21
3 Product Overview Pressure to 0 PSI Automatic Reversing Positive Displacement Automatic Pressure Relief Designed for OEM built in Applications Four Series, Multiple Sizes to 135 GPM Configuration 1: Tab/Pin in Torque Ring Mates with Slot in Machinery Drive Shaft Configuration 2: Slot in Torque Ring Mates with Tab/Pin in Machinery Drive Shaft Pump Consists of Rotor/Torque Rings, Assembly, Idler, Carrier Assembly, and Floating Plate Options Cover - See Pages () Springs and Transfer Bushings - See Pages () TR Series Typical Layout OPTIONAL COVER SHOWN (INTERNAL OR EXTERNAL PORTS AVAILABLE) CARRIER ASSEMBLY IDLER FLOATING PLATE OPTIONAL TRANSFER BUSHING ROTOR/TORQUE RING ASSEMBLY SHOWN WITH SLOT FOR PIN. (OPTIONAL TORQUE RINGS AVAILABLE WITH WELDED PIN FOR DRIVING.) OPTIONAL SPRING (VARIOUS SPRINGS ARE AVILABLE FOR SETTING VARIOUS RELIEVING PRESSURES.) General Pump Operation In operation all parts of the pump assembly rotate with the drive shaft except the idler gear, idler carrier, and cover. Driven by the rotor assembly, the idler gear turns on the idler pin, and because it has one less tooth than the rotor gear with which it meshes, pumping action is created. The idler carrier is positioned against the cover. When the drive shaft changes rotation, the idler carrier rotates 1 degrees, maintaining the same direction of flow. The relief valve spring (or pre-compressed spring assembly) keeps all parts of the pumping unit together at less than relief valve settings. When relief pressure is reached the spring compresses and pump clearances increase, allowing oil to bypass between the idler carrier and the gear set, and this oil is relieved externally of the pump. Version 1.4 Page 3 of 21
4 Pump Mounting Dimensions for TRA Model Pumps H A Ø J SLOT FOR PIN TYPE -2 Ø RECOMMENDED F G TAB TYPE -1 MODEL TRA SIZE GPM AT 0 PSI CUBIC IN/REV. RPM RPM RPM A ± TYPE -1 TYPE -2 F G H J. X.9 WIDE.187 X.187 WIDE.281 X.1 WIDE.125-1/8 PIN Note: Pumps can be used at lower speeds. Capacity in GPM = cu. In/REV. x RPM 231 Version 1.4 Page 4 of 21
5 Pump Mounting Dimensions for TRC Model Pumps H A Ø J SLOT FOR PIN TYPE -2 Ø RECOMMENDED F G WELDED PIN TYPE -1 MODEL TRC SIZE GPM AT 0 PSI CUBIC IN/REV. RPM RPM RPM A ± TYPE -1 TYPE -2 F G H J.156 X.188 WIDE.25 X.25 WIDE.3 X.187 WIDE.156-5/32 PIN Note: Pumps can be used at lower speeds. Capacity in GPM = cu. In/REV. x RPM 231 Version 1.4 Page 5 of 21
6 Pump Mounting Dimensions for TRL Model Pumps H A Ø J SLOT FOR PIN TYPE -2 Ø RECOMMENDED F G WELDED PIN TYPE -1 MODEL TRL SIZE GPM AT 0 PSI CUBIC IN/REV. RPM RPM RPM A ± TYPE -1 TYPE -2 F G H J.172 X.234 WIDE.281 X.312 WIDE.468 X.2 WIDE.188-3/16 PIN Note: Pumps can be used at lower speeds. Capacity in GPM = cu. In/REV. x RPM 231 Version 1.4 Page 6 of 21
7 Pump Mounting Dimensions for TRS Model Pumps H A Ø J SLOT FOR PIN TYPE -2 Ø RECOMMENDED F G WELDED PIN TYPE -1 MODEL TRS SIZE CUBIC IN/REV. RPM GPM AT 0 PSI A TYPE -1 TYPE -2 RPM RPM ±.015 F G H J.2 X.297 WIDE.312 X.375 WIDE.625 X.272 WIDE.2-1/4 PIN Note: Pumps can be used at lower speeds. Capacity in GPM = cu. In/REV. x RPM 231 Version 1.4 Page 7 of 21
8 Cover Mounting Dimensions for (TRC & TRS) Models OPTIONAL INLET PORT* 31 ±2 ØJ K 31±2 N E ØL ØP PIN (6) HOLES ØF EQUALLY SPACED M H H G D OPTIONAL OUTLET PORT* ØB ØA C Model A ±.0 B ±.005 C ±.015 D ±.0 E ±.0 F G H ±.0 J BA- SIC K L TRC /32 TRS /4 M ±.005 N +.0 P Note: Combinations of drilled holes to communicate with the cored openings for internal or external ports are available. Covers with cored inlet port also available please contact factory. Version 1.4 Page 8 of 21
9 Cover Mounting Dimensions for TRL Models OPTIONAL INLET PORT* 31 ±2 ØJ K 31±2 E H H L (6) HOLES ØF EQUALLY SPACED M G N ØP PIN D OPTIONAL OUTLET PORT* ØB ØA C Model A ±.0 B ±.005 C ±.015 D ±.0 E ±.0 F G H ±.0 J BA- SIC K L TRL /16 M ±.005 N +.0 P Note: Combinations of drilled holes to communicate with the cored openings for internal or external ports are available. Covers with cored inlet port also available please contact factory. Version 1.4 Page 9 of 21
10 Spring Data Chart - TRA Models SPRING LOAD LBS. 12TRA63-12TRA63-55 DISCHARGE PRESSURE P.S.I. W/ NO TRANSFER BUSHING DISCHARGE PRESSURE P.S.I. WITH TRANSFER BUSHING "A" SPRING COMPRESSED LENGTH IN INCHES Version 1.4 Page of 21
11 TRA Pump Dimensions A A A A 2 63 Ø Ø Ø T.I.R..594 MIN..003 T.I.R. 1 3 & & 4 Ref No. Part Name Part No. 1 Floating Plate 12TRA25 2 Transfer Bushing 12TRA58 3 Spring #55 12TRA Spring # 12TRA63- Version 1.4 Page 11 of 21
12 Spring Data Chart - TRC Models TRC SPRING LOAD LBS. 19TRC63-74 DISCHARGE PRESSURE P.S.I. W/ NO TRANSFER BUSHING DISCHARGE PRESSURE P.S.I. WITH TRANSFER BUSHING 19TRC "A" SPRING COMPRESSED LENGTH IN INCHES Version 1.4 Page 12 of 21
13 TRC Pump Dimensions A A A A 2 63 Ø.6.6 Ø.6.6 Ø T.I.R..937 MIN..003 T.I.R. 1 3, 4, & 5 1 3, 4, & 5 Ref No. Part Name Part No. 1 Floating Plate 19TRC25 2 Transfer Bushing 19TRC58 3 Spring #37 19TRC Spring #74 19TRC Spring #124 19TRC Version 1.4 Page 13 of 21
14 Spring Data Chart - TRC Pumps (Precompressed Spring Assemblies) TRC SPRING LOAD LBS. RANGE 19TRC16-19TRC TRC16-19TRC16-25 DISCHARGE PRESSURE P.S.I. W/ NO TRANSFER BUSHING 1 DISCHARGE PRESSURE P.S.I. WITH TRANSFER BUSHING "A" SPRING CARTRIDGE COMPRESSED IN INCHES Version 1.4 Page 14 of 21
15 TRC Pump Dimensions (Precompressed Spring Assemblies) A A A A Ø Ø Ø T.I.R..969 MIN..003 T.I.R. 1 3, 4, 5, 6, & 7 1 3, 4, 5, 6, & 7 Ref No. Part Name Part No. 1 Floating Plate 19TRC25 2 Transfer Bushing 19TRC58-A 3 Spring Assembly #25 19TRC Spring Assembly # 19TRC16-5 Spring Assembly #75 19TRC Spring Assembly # 19TRC16-7 Spring Assembly #127 19TRC Version 1.4 Page 15 of 21
16 Spring Data Chart - TRL Models TRL SPRING LOAD LBS. 18TRL63-85 DISCHARGE PRESSURE P.S.I. W/ NO TRANSFER BUSHING DISCHARGE PRESSURE P.S.I. WITH TRANSFER BUSHING 18TRL "A" SPRING COMPRESSED LENGTH IN INCHES Version 1.4 Page 16 of 21
17 TRL Pump Dimensions A A A A Ø Ø Ø T.I.R MIN..003 T.I.R. 1 3, 4, & 5 1 3, 4, & 5 Ref No. Part Name Part No. 1 Floating Plate 18TRL25 2 Transfer Bushing 18TRL58 3 Spring #45 18TRL Spring #85 18TRL Spring #142 18TRL Version 1.4 Page 17 of 21
18 Spring Data Chart - TRL Pumps (Precompressed Spring Assemblies) 1 18TRL TRL SPRING LOAD LBS. 18TRL TRL16-55 DISCHARGE PRESSURE P.S.I. W/ NO TRANSFER BUSHING 1 DISCHARGE PRESSURE P.S.I. WITH TRANSFER BUSHING 18TRL16-25 RANGE "A" SPRING COMPRESSED LENGTH IN INCHES Version 1.4 Page 18 of 21
19 TRL Pump Dimensions (Precompressed Spring Assemblies) A A A A Ø Ø Ø T.I.R MIN..003 T.I.R. 1 3, 4, 5,6, & 7 1 3, 4, 5,6, & 7 Ref No. Part Name Part No. 1 Floating Plate 18TRL25 2 Transfer Bushing 18TRL58-A 3 Spring Assembly #25 18TRL Spring Assembly #55 18TRL Spring Assembly #85 18TRL Spring Assembly #115 18TRL Spring Assembly #145 18TRL Version 1.4 Page 19 of 21
20 Spring Data Chart for TRS Models SPRING LOAD LBS. TRS63- TRS63-0 TRS63-1 DISCHARGE PRESSURE P.S.I. W/ NO TRANSFER BUSHING 1 DISCHARGE PRESSURE P.S.I. WITH TRANSFER BUSHING "A" SPRING COMPRESSED LENGTH IN INCHES Version 1.4 Page of 21
21 TRS Pump Dimensions A A A A Ø Ø Ø , 4, & T.I.R MIN. 1 3, 4, & T.I.R. Ref No. Part Name Part No. 1 Floating Plate TRS25 2 Transfer Bushing TRS58 3 Spring # TRS63-4 Spring #1 TRS Spring #0 TRS63-0 Tuthill Pump Group USA United Kingdom China Excellence at work. Excellence in life.
Engineering Data Pack C Series and 4300 Series Pumps
Engineering Data Pack Series and 4300 Series Pumps Excellence at work. Excellence in life. Table of ontents Product Overview 3 2F Features 3 2E Features 3 2B/4310 Features 3 K2B Features 3 2FA Features
More informationL & C SERIES. Lubrication & Circulation Pumps. Pump Your Heart Into It
L & C SERIES Lubrication & Circulation Pumps Pump Your Heart Into It LEGENDARY SUCCESS The L & C Series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation
More informationC SERIES ENGINEERING DATA PACK
Tuthill Pump Group 00 South Pulaski Road Alsip, IL 6080 USA Phone: 708.89.00 Fax: 708.88.0869 SERIES EGIEERIG DATA PAK ontents: Page : Page : Pump Performance Data /400/400 Pump Performance Data (40, 00,
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
More informationSERIES HYDRAULIC MOTORS
D9 SERIES HYDRAULIC MOTORS D9 overview The D9 Series of motor is the largest member of the White Drive Product s family. The product is capable of producing torque values comparable to competitive motors,
More informationEngineering Data Pack L/4100 Series Pumps
Engineering Data Pack L/400 Series Pumps Excellence at work. Excellence in life. Table of ontents Product Overview LE Standard LE Metric 00, 0,, & 2LE Pump Mounting Dimensions 5 5LE Pump Mounting Dimensions
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationTOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l:
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More informationIFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS * High Volumetric Efficiency * Maximum 3000 PSI operating pressure * Twelve Vane Design for quite operation * Hydraulic Balanced for external life
More informationGEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More informationMANUAL FOAM SYSTEM MODELS: MFA200 CLASS A FOAM MFA201 CLASS B FOAM MFA220 CLASS A and B FOAM
Document Number: XM-MFA2PM-R0A MFA200 Rev150814 MANUAL FOAM SYSTEM MODELS: MFA200 CLASS A FOAM MFA201 CLASS B FOAM MFA220 CLASS A and B FOAM FIRE RESEARCH CORPORATION www.fireresearch.com 26 Southern Blvd.,
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationALUMINUM HIGH PERFORMANCE GEAR PUMPS
ALUMINUM HIGH PERFORMANCE GEAR PUMPS FEATURES EXTRUDED ALUMINUM DIE CAST BODY ALUMINUM MOUNTING FLANGE / COVER FLOATING AXLE SLEEVE AND DU BEARINGS DOUBLE LIP SHAFT SEAL TO PREVENT CAVITATION AND LEAKAGE
More informationGLOBAL STANDARD COOLER
COOLER RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high performance aluminum cooling systems. AKG is best known for its
More informationHWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More informationTE S RAYCHEM RSTI-CC-58 SCREENED, SEPARABLE COUPLING SYSTEM
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. industry photo. This image and the one above should be different versions of the same photo
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationInstallation and Service Instructions. ST Series Pumps
Installation and Service Instructions ST Series Pumps! WARNING READ MANUAL before operating or working on a Tuthill ST Series pump. Page 2 of 24 4/24/03 Table of Contents Page 4 Page 5 Page 5 Page 6 Page
More informationLX-SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.9 4.4 5.0 5.4 5.8 6.3 6.9 7.3 C1.5-05-70/140LX 5 6.4 7.2 8.1 8.7 9.4 10.3 11.3 11.9 C1.5-10-70/140LX 10
More informationLX SERIES Low-Pressure Gas Compressors
70 to 140 psig Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.7 4.2 4.6 5.0 5.5 5.9 6.4 6.8 C1.5-05-70/140LX 5 6.1 6.8 7.6 8.3 9.0 9.7 10.4 11.1 C1.5-10-70/140LX 10
More informationGLOBAL STANDARD COOLER
COOLER OIL-To-AIR COOLING SYSTEMS WIT YDRAULIC MOTOR Product Information AKG CooL-Line is a standard line of products from the market leader in high performance aluminum cooling systems. AKG is best known
More informationArmstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance
Armstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance 119 Overview Warning: This bulletin should be used by experienced personnel as a guide to the installation and maintenance
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products WR SERIES HYDRULIC MOTORS WR overview The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability. It features an optimized Roller Stator
More informationSECTION D Engine 6.0L Diesel
303-01D-i Engine 6.0L Diesel 303-01D-i SECTION 303-01D Engine 6.0L Diesel CONTENTS PAGE DESCRIPTION AND OPERATION Engine... 303-01D-2 303-01D-2 Engine 6.0L Diesel 303-01D-2 DESCRIPTION AND OPERATION Engine
More informationSeries P2/P3 Variable Volume Piston Pumps
Variable Volume Piston Pumps A Bulletin HY13-2656-B1/US A3 Introduction General information The newly developed variable displacement piston pumps from Parker Hannifin, designated P2 and P3, are mainly
More informationCannon Trident Connector System
is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More informationPage 1 of 9 303-01C Engine 6.0L Diesel 2004 F-Super Duty 250-550/Excursion DESCRIPTION AND OPERATION Procedure revision date: 08/06/2003 Engine Printable View Engine Description The 6.0L diesel engine
More informationHydraulic Pump. General description. Hydraulic circuit diagram
Hydraulic Pump SYSTEM 2 General description The hydraulically actuated grease pump BEKA HAMAX System 2 is mainly used to lubricate hydraulic hammers or other construction machinery accessories. Due to
More informationLIQUID-SPECIFIC PRODUCT LINE: STAINLESS STEEL VANE PUMPS PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 NOMINAL FLOW RATES 2
Page 445.1 PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid
More informationFILTERS DOUBLE LENGTH, DUPLEX DOUBLE LENGTH, SIMPLEX SINGLE LENGTH, SIMPLEX SINGLE LENGTH, DUPLEX
FLV Series Bag and Cartridge Filters - Overview ALL THERMOPLASTIC, GLASS FILLED POLYPROPYLENE INJECTION MOLDED CONSTRUCTION, FOR SUPERIOR CORROSION RESISTANCE PERFORMANCE FILTERS DOUBLE LENGTH, DUPLEX
More informationSERIES HYDRAULIC MOTORS
ERIE HYDRULIC MOTOR overview The eries motor is the leader in its class, offering high efficiency and durability. The three-zone orbiting valve, laminated manifold and Roller tator motor work harmoniously
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
More informationSureFire II Lubricator
SureFire II Lubricator Automatic, Oil & Fluid Grease, Three Phase General The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements
More informationEnergy Chain Systems Triflex R Energy Tubes
Energy Chain Systems Triflex R Energy Tubes Multi-Dimensional Movement Energy Chains For Robotic Applications Triflex R Triflex R Series A modular, multi-axis, energy-supply protection system Triflex R:
More informationNominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
More informationINSTALLATION, OPERATING AND SERVICE MANUAL
INSTALLATION, OPERATING AND SERVICE MANUAL ECONO-mist WATER SOFTENER Demand Regeneration 7-LMC56-75B 7-LM56-75B 7-LM56-100B 7-LM56-150B 7-LM56-200B Congratulations on purchasing your new Lancaster Water
More informationProduct Range IDEX CORPORATION
Product Range IDEX CORPORATION Viking Pump provides an unmatched combination of application expertise and positive displacement pumping products to meet your pumping needs. We specialize in the design,
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
More informationSection 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:
Section 6.1 Implement Circuit - General System General: TF Configuration... 6.1.3 TB Configurations... 6.1.5 Implement Pump Breakdown... 6.1.6 Operational Description: General... 6.1.7 Compensator Control...
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationREPAIR PROCEDURES MANUAL
REPAIR PROCEDURES MANUAL PVX Series Vane Pumps A Design Series Step-by-Step Guide to Troubleshooting and Repairing PVX Series Vane Pumps Introduction Thank you for choosing Continental Hydraulics PVX Vane
More informationGEAR PUMPS TOUGH INTERNAL GEAR SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE
TOUGH INTERNAL GEAR GEAR PUMPS SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products,
More informationFill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer)
GPO ubricator Motor-driven gear pump, Oil General The GPO ubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
More informationInstallation and Service Instructions 1018, 1020, 1022, & 1024 Size Pumps
Installation and Service Instructions 1018, 1020, 1022, & 1024 Size Pumps Excellence at work. Excellence in life. Table of Contents General Description 3 The Pumping Principle 3 Location 3 Proper Installation
More informationFlow volume: l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer
Std Line ACE3 Screwpump Series Product description Flow volume: 15-180 l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer The Std Line (standard) ACE pumps come
More informationAKG 2009 (changes and errors expected) HC- series. Classic
AKG 2009 (changes and errors expected) Classic performance hc @ 1750 RPM FAN SPEED HEAT REJECTION Horsepower Removed @ 100-F ETD 640 320 160 80 40 20 10 HC26 @ 3450 RPM HC14 @ 3450 RPM HC66 HC48 HC32 HC240
More informationCROSS HYDRAULICS PTY LTD SECTION
OVERVIEW The motor series is an economical alternative to more complex geroler designs that still provides high efficiency across a wide performance range. These motors are intended for medium-duty applications
More informationHPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationZEM Injector. Series 32, 33, 34, 35, 39. General. Operation. Features. Technical Data. Injector Outputs R2 08/10
ZEM Series 32, 33, 34, 35, 39 General The ZEM Series injector line are positive displacement injectors (PDI) that deliver precise and controlled lubrication outputs which meet exact requirements for diverse
More information4 Series 298 Air Operated Stainless Steel Piston Valves For Steam and Aggressive Fluid Service
Series 98 Air Operated Steel Piston Valves For Steam and Aggressive Fluid Service Applications Rubber Vulcanization/Tire Presses Industrial Autoclaves Foundries Laundry Food & Beverage Chemical Processing
More informationChar-Lynn Power Steering. Parts Information. 110, 230, and 450 Series. July, 1999
Char-Lynn Power Steering July, 1999 Parts Information Steering Contol Units 001 002 1 2 O-ring Groove 3 O-ring Groove 4 7 3 6 5 Low Input Torque Spring (4)/Spacer (2) Package Standard Input Torque Spring
More informationHYDRAULICS VINCKE HYDRAULIC PUMPS
VINCKE HYDRAULIC PUMPS TECH-VHP200.1 index 3 link to your page / link a su página Gear pumps Introduction 3 Group 0 3 Group 1 3 Group 2 3 Group 3 4 6 7 12 18 Variable displacement pumps 21 Hand pumps 3
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
More informationFLHC SERIES DATA BOOKLET
SERIES DATA BOOKLET Horizontal Split Case Fire Pumps UL Listed 0 Hz Photographs of a few Manufacturing Units Contents Identification Type key Fire pump Product data Introduction Applications Features and
More informationBACKHOES. Universal quick attach/mainframe mount
BACKHOES For Skid Steer Loaders, Compact Tool Carriers, Compact Tractors and Compact Tractor Loaders Bradco Backhoes, by Paladin, are designed to fit compact tractors, compact tractor loaders, compact
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationVane pumps single, double & triple T6 mobile application zp20
Vane pumps single, double & triple T6 mobile application zp20 Publ. 1 - AM0701 - A 11 / 98 / 2000 / FB Replaces : 1 - AM 075 - A FEATURES - T6 SERIES MOBILE APPLICATION GREATER FLOW HIGHER PRESSURE BETTER
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationVIKING. Series LVP STAINLESS STEEL VANE PUMP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA 2016 PRODUCT DESCRIPTION SERIES OPERATING RANGE
Page 445.1 PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid through a cam-shaped
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
More informationSUMMARY. IN - series. IO - series. WI - series. WM - series. CO - series. IW - series. FI - series. TO - series. FO - series.
Insert Check Valves Watts Industries produces an extensive assortment of plastic check valves. These check valves can be found in water meters, shower and bath taps and safety units, but they are also
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationCENTRIFUGAL PUMP AND SEAL (API Std. 610 and 682) Presented By Prakash Kumar ME(NSPL)
CENTRIFUGAL PUMP AND SEAL (API Std. 610 and 682) Presented By Prakash Kumar ME(NSPL) CONTENTS OF PRESENTATION BRIEF ABOUT CENTRIFUGAL PUMPS AS PER Std.API 610. MECHANICAL SEAL DESIGN AS PER Std.API 682.
More informationFLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
More informationService Manual for Hydraulic Vane Pumps Subplate Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Subplate Mounted SM PSSF/07.03
More informationSERVICE MANUAL. PVR15-Manifold Series Pump. J Design Series INSTALLATION. Ordering Code PVR15 - _ RM - _ - - J
SERVICE MANUAL PVR15-Manifold Series Pump Installation, Startup, Operating Instructions, Parts Pages, Repair Procedures J Design Series This service manual applies to products with Ordering Codes like
More informationVane pumps single, double & triple T6 mobile application zp20
Vane pumps single, double & triple T6 mobile application zp20 Publ. 1 - AM0701 - A 11 / 98 / 2000 / FB Replaces : 1 - AM 075 - A FEATURES - T6 SERIES MOBILE APPLICATION GREATER FLOW HIGHER PRESSURE BETTER
More informationPT Series Tank Top Filters
Tank Top Filters 9 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits.
More informationInstallation and Service Instructions. GlobalGear Series Pumps
Tuthill Pump Group 12500 South Pulaski Road Alsip, IL 60803 USA o 708.389.2500 f 708.388.0869 SM 73 Installation and Service Instructions GlobalGear Series Pumps!!! WARNING READ MANUAL before operating
More informationVariable Displacement Piston Pumps Series P2/P3. General Information. P3 Series
General Information General Information P2 Series The newly developed variable displacement piston pumps from Parker Hannifin, designated P2, are intended for mobile applications, featuring a very compact
More informationFEATURES SPECIFICATIONS
FETURES 1 Heavy-Duty Drive Link is up to 30% stronger than competitive designs for longer life. 1 2 3 H 2 Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiency. 3
More information20,000 LB INDUSTRIAL WINCH
OPERATING, SERVICE AND MAINTENANCE MANUAL 20,000 LB INDUSTRIAL WINCH CAUTION: READ AND UNDERSTAND THIS MANUAL BEFORE INSTALLATION AND OPERATION OF WINCH. SEE WARNINGS! TABLE OF CONTENTS WARRANTY INFORMATION...
More informationCapacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
More informationMosherflo-ST, SU, and STX Self-Priming Pumps
Mosherflo-ST, SU, and STX Self-Priming Pumps 8-339-338 pumps@rbmosherco.com Physical Address: 9 FM 7 San Leon, TX 7739 Mailing Address: Drawer - A Dickinson, TX 7739 www.rbmosherco.com ST & SU Parts List
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More information3000 psi (207 bar) Output/ min. 115 VAC 10cc (0.61 cu. in.) 24 VDC 12cc (0.73 cu. in.) Discharge Element Output Port.
MultiPort Lubricator Grease, Injector General The MultiPort Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with injector systems. The unit includes two pumping
More informationHERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
More informationGrease and Oil Injectors
Grease and Oil Injectors LIT099 AL-32 Grease Injector OVERVIEW The AL-32 Grease Injectors are designed for single line, high-pressure centralized lubrication systems. These injectors are available in
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products RS SERIES HYDRULIC MOTORS RS overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech. Unlike competitive products using
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationJune Drill of the Month Instructor Guide. Topic: Review of Hydraulics and Pump Components
Course: Pumps Refresher Course Session Reference: 1 June Drill of the Month Instructor Guide Topic: Review of Hydraulics and Pump Components Level of Instruction: Time Required: 3 hours Materials: Chalkboard
More information8L SERIES THREE SCREW PUMPS
TM 8L SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 1500 PSID (103 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 50 HZ: 960 1450 1200 1100 630M 40 250 1000 900
More informationInstallation and Service Instructions 1012, 1014, 1015, & 1017 Size Pumps
Installation and Service Instructions 1012, 1014, 1015, & 1017 Size Pumps Excellence at work. Excellence in life. Table of Contents General Description 3 The Pumping Principle 3 Location 3 Proper Installation
More informationMODEL RPH-20,000 INDUSTRIAL PLANETARY WINCH OPERATING, SERVICE AND MAINTENANCE MANUAL
OPERATING, SERVICE AND MAINTENANCE MANUAL MODEL RPH-20,000 INDUSTRIAL PLANETARY WINCH CAUTION: READ AND UNDERSTAND THIS MANUAL BEFORE INSTALLATION AND OPERATION OF WINCH. SEE WARNINGS! TABLE OF CONTENTS
More informationService Manual for Hydraulic Vane Pumps Flange Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Flange Mounted SM PSCF/07.03
More informationEaton Vickers V VQ Vane Pump Cartridge
Eaton Vickers V VQ Vane Pump Cartridge Features Replacement parts for fixed displacement vane pumps (single and double vane pump V/VQ series). Available in both 12 vanes design for industrial application
More informationInstallation and Service Instructions 1008 & 1010 Size Pumps
Installation and Service Instructions 1008 & 1010 Size Pumps Excellence at work. Excellence in life. Table of Contents The Pumping Principle 3 Location 3 Proper Installation 3 Filter Protection 4 Startup
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12
More informationPOWERMASTER SERIES 20,000 LB INDUSTRIAL WINCH AND BUMPER
OPERATING, SERVICE AND MAINTENANCE MANUAL POWERMASTER SERIES 20,000 LB INDUSTRIAL WINCH AND BUMPER CAUTION: READ AND UNDERSTAND THIS MANUAL BEFORE INSTALLATION AND OPERATION OF WINCH. SEE WARNINGS! TABLE
More informationAirflex Floating Housing Brake
Airflex Floating Housing Brake Airflex FHB Brake Elements Dimensional & Technical Data Overview Eaton Airflex has introduced a revolutionary new design in disc brake technology called the Floating Housing
More informationC Series Valves C24 1-1/4 NPT/BSPT C23 1 NPT/BSPT C22 3/4 NPT/BSPT. C22/C23/C24 Series (See page 88)
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
More informationSC-400, SC-550, SC-650 INCLUDING: OPERATION, INSTRUCTION, INSTALLATION, MAINTENANCE AND PARTSBOOK
REV D: 0/8 INCLUDING: OPERATION, INSTRUCTION, INSTALLATION, MAINTENANCE AND PARTSBOOK IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS TOOL. ALL PURPOSE BREAKING SAW
More informationMonarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.
Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve
More information