L Series. Nothing is tougher. We don t compromise on security. At Schlage we know that every product you specify has to stand up to

Transcription

1 L Series Nothing is tougher At Schlage we know that every product you specify has to stand up to constant use and abuse. Your building s locking systems face an additional challenge keeping people and other assets safe while delivering constant, reliable performance. Schlage L Series Extra Heavy Duty Mortise Locks are built to withstand the rigors of daily use without fail. We don t compromise on security The safety and security of your clients buildings is something we take very seriously. That s why every Schlage lock and deadbolt undergoes intensive testing to determine its ANSI grade level: Cycle tests Door impact tests Resistance tests Warped door tests Bolt strength tests We pay attention to these details so you can focus on creating a functional and aesthetically pleasing environment for your clients. In fact, every one of our L Series locks meets ANSI Grade 1 standards for safety. Schlage L Series 7

2 The M Collection A range of options. A single standard of quality. Introducing the M Collection, an entire lineup of decorative levers designed to maintain a custom high-style look on doors throughout any building from the main entrance to the supply closet. The ability to suite M Collection levers across multiple platforms from Schlage and Von Duprin means consistent style and functionality along with unrivaled security. The M Collection was designed to function as a visual extension of any interior, from contemporary to classic. M51 M52 M53 2.4" 2.2" 2.6" 4.5" " 3.2" 3" 3.2" M56 M57 M61 2.1" 2.15" 2.1" 4.6" 4.5" 4.5" 3" 2.9" 3.2" M81 M82 M83 0.4" 0.4" 0.4" 4.8" 4.8" 4.6" 2.9" 2.9" 2.9" 10 Schlage L Series

3 Finish options All lever designs shown (M Collection and Standard) can be paired with any of the following commercial graded products for suiting across an office, a floor or an entire building. Color Bright brass Satin brass Antique brass Satin nickel Bright chrome Satin chrome Bright stainless steel Satin stainless steel Aged bronze Locks ANSI/BHMA number /626AM /630AM 643 US number US3 US4 US5 US15 US26 US26D US32 US32D US11 AM = Antimicrobial. See pricebook for additional trim and finish availability. 33A, 95 & 99 devices not available in 619 & 630 finishes. M54 M55 Schlage L Series mortise locks Grade 1 Schlage L Series locks have long been the industry standard for mortise locks, with a comprehensive offering of functions and options to support any opening need. 2.14" 2.14" Schlage LT Series tubular locks Grade " 4.35" 3" 4.3" The perfect compliment to the Schlage L Series or the Von Duprin exit devices, the LT Series tubular chassis is based on venerable L Series mortise lock and provides an alternative to lever suiting for interior doors. Exit devices M62 M63 Von Duprin 98/99 exit devices Grade 1 1.9" 2.7" 4.5" 2.1" 3.2" 4.5" Von Duprin created the first exit device in 1908, and continues to redefine the industry today with unsurpassed quality and industry-unique features such as concealed vertical cables. The 98/99 Series exit device is intended for standard-stile doors. For use with 996L trim only. M84 M85 Von Duprin 33A/35A exit devices Grade 1 0.4" 0.3" Offering the same innovate features as the 98/99 Series, the 33A/35A Series of exit devices is intended for narrowstile doors. For use with 360L trim only. 5.1" 4.9" 3" Images shown with Schlage L Mortise A rose; additional rose and escutcheon designs available. 3.3" Von Duprin 94/95 exit devices Grade 1 The 94/95 has the pushbar trim recessed into the door to minimize the external profile, allowing more room for people and equipment to pass through. For use with 940L trim only. Schlage L Series 11

4 The Standard Collection Built on our tradition of raising industry standards. Like the M Collection, these lever designs suite with exit devices and locks from our trusted Schlage and Von Duprin brands. And, they are built to the same exacting standards. Our Standard Collection levers offer a more traditional style that is appropriate for use in a number of commercial applications " 1.813".5" 3.875" 4.75" 4.75" 2.688" 2.813" 2.813" " 2.031" 4.625".5" 4.75" 4.875" 3.063" 3" 2.688" Longitude Merano Omega.5" 2".375" 4.875" 4" 5.063" 2.563" 3.125" 3.313" 12 Schlage L Series

5 Finish options Color Bright brass Satin brass Antique brass Satin bronze Oil rubbed Bronze Satin nickel Bright chrome Satin chrome Bright stainless steel Satin stainless steel Aged bronze ANSI/BHMA number /626AM /630AM 643 US number US3 US4 US5 US10 US10B US15 US26 US26D US32 US32D US11 AM = Antimicrobial. See pricebook for additional trim and finish availability. 33A, 95 & 99 devices not available in 619 & 630 finishes ".5" 1.969" 3.75" 4.625" 4.625" 2.875" 2.5" 2.875" Accent Asti Latitude 2" 2" 4.125" 4" 4.75" 3.125" 2.625" 2.563" St Annes 2" 4.313" 3.125" To learn more about suiting of Schlage and Von Duprin products with our decorative or standard levers contact your security consultant or visit allegion.com/us. Schlage L Series 13

6 Escutcheons and roses Choose from three types of escutcheon and two rose sizes to add tough, durable performance to your lockset. Escutcheons Roses L Full face Specify by adding L after lever design. Material: Cold-forged brass, bronze or stainless steel Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e Size: 8" x 1 3 4" x 7 16" (203 mm x 44 mm x 11 mm) 8" 203mm A Wrought rose 2 1 8" (54 mm) diameter Available for use on L Series knob and lever designs. Specify by adding A after lever design Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e L Concealed Specify by adding C suffix to function and by adding L after lever design. Material: Cold-forged brass, bronze or stainless steel Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e Size: 8" x 1 3 4" x 7 16" (203 mm x 44 mm x 11 mm) 8" 203mm B Wrought rose " (65 mm) diameter Available for use on L Series knob and lever designs. Specify by adding B after lever design. Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e N Escutcheon Specify by adding N after lever design. Material: Heavy wrought reinforced brass, bronze or stainless steel Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e Size: 8" x " x 7 16" (203 mm x 65 mm x 11 mm) 8" 203mm C Wrought rose 2 5 8" (66 mm) diameter Available for use on L Series knob and lever designs. Specify by adding C after lever design. Finishes: 605, 606, 609, 619, 625, 626, 629, 630, 643e 14 Schlage L Series

7 Thumbturns Choose from three variations of thumbturn locks that help you meet the demands of specialized commercial projects. Hotel occupancy indicator For lock function L9486P, this unit can be used with A or B roses. Requires a 1 3 8" (35 mm) cylinder for 1 3 4" (44 mm) doors. Specify finish when ordering separately. Optional EZ turn L Available for rose and escutcheon trim. Disability turn (ADA) option to standard thumbturn. Can be used with thumbturn-function L Series lock except L9463 and L463. Specify lock per L when ordering. Coin turn For lock function L9044 and L9444 with rose trim. Specify and finish per L when ordering. Tactile warning (knurling) Schlage L Series commercial levers feature knurling only on the outside lever unless otherwise specified. 03 Lever shown This feature is available on the following lever models: 01, 02, 03, 05, 06, 07, 12, 17, 18, 41, 42 and 93. Products featuring a knurled surface will be indicated by adding the prefix 8 to the lever number. For example, L9050P 803A/03A. Schlage L Series 15

8 Lock functions Lock components Symbol key Deadbolt Cylinder Coin turn Stopworks functions by turn-piece Auxiliary guarded latch Latchbolt with anti-friction tongue Outside knob or lever Inside knob or lever Thumbturn Solid spindle Two-piece spindle Emergency turn piece Thumbturn cylinder Occupancy indicator Product identification guide L/LV P Lock series L = standard LV = vandlgard 0 = dummy trim without lock case 9 = functions with lock case 0 = no deadbolt 1 = dummy trim 4 = with deadbolt Function Cylinder suffix P = 6-pin full-face mortise cylinder with Schlage logo * L = less full-face cylinder C = concealed mortise cylinder W = less concealed cylinder R = full-size interchangeable core with Schlage logo J = less full-size interchangeable core F = full-size interchangeable core less Schlage logo T = full-size construction core BD = SFIC less core BDC = disposable SFIC GD = Everest patented SFIC HD = construction SFIC SFIC = Small Format (Best style) Interchangeable Core To order less Schlage logo, specify lock with K faceplate. LV = Vandlgard function allows exterior lever to rotate freely down while remaining securely locked. 16 Schlage L Series

9 Lock functions ANSI A156.13, Series 1000 Schlage L9010 Passage latch ANSI FO1 Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress. L9040 F22 LV9040 Bath/bedroom privacy lock Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn. Turning inside knob/lever or closing door unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn (furnished) in access hole and rotate. Inside lever is always free for immediate egress. L9044 LV9044 Privacy with coin turn outside Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn or outside coin turn. Operating inside knob/lever, closing door, rotating inside thumbturn or rotating outside cointurn unlocks outside knob/lever. Specify per L for Torx screws. Available with rose trim only. (Previously XL11-868) L9440 LV9440 F19 Privacy with deadbolt Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn in access hole and rotate. Inside liner is always free for immediate egress. (Previously XL ) Schlage ANSI L9444 LV9444 Privacy with deadbolt and coin turn outside Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn or outside coin turn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever. Specify per L for Torx screws. Available with rose trim only. Inside lever is always free for immediate egress. (Previously XL11-868) L0170 Half dummy trim Knob/lever on one side fixed by mounting bar. L0172 Full dummy trim Knob/lever on both sides fixed by mounting bar. L9175 Half dummy trim with lock case Fixed knob/lever on one side inoperable. Includes lock case and armored front. Options same as L9176 below. L9176 Full dummy trim with lock case * Fixed knob/lever on both sides. Includes lock case and blank armor front. May be ordered with optional XL armored front with cutout to receive deadbolt. * In a double-door application where the dummy will be used as the strike order Armored Front Strike separately. Schlage L Series 17

10 Lock functions Single cylinder non-deadbolt functions Schlage ANSI L9050 F04 LV9050 Office and inner entry lock Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is closed. Inside liner is always free for immediate egress. Schlage ANSI L9080EL LV9080EL Electrically locked (fail safe) Outside knob/lever continuously locked by 24V AC or DC. Latchbolt retracted by key outside or by knob/lever inside. Switch or power failure allows outside knob/ lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever always free for immediate exit. Inside lever is always free for immediate egress. L9056 LV9056 L9050 with automatic unlocking Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside, thumbturn or closing door. Rotating inside knob/ lever simultaneously retracts latchbolt and unlocks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9070 F05 LV9070 Classroom lock Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key. Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9080EU LV9080EU Electrically unlocked (fail secure) Outside knob/lever unlocked by 24V AC or DC. Latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9080EL-RX / LV9080EL-RX L9080EU-RX / LV9080EU-RX Request to exit (RX) electrified lock Same as L9080EL and L9080EU functions. In addition, a micro-switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/levers rotates the retractor hub. The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress. Specify per L with L functions, specify L with LV functions. Inside lever is always free for immediate egress. L9076 F06 LV9076 Classroom holdback lock Latchbolt retracted by knob/lever from either side unless outside is locked by key. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Depress inside knob/lever and turn key 360 for holdback feature. Inside lever is always free for immediate egress. L9080 F07 LV9080 Storeroom lock Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. 18 Schlage L Series

11 Lock functions Single cylinder deadbolt functions Schlage ANSI Schlage ANSI L9453 LV9453 Entrance lock F20 L9485 LV9485 Faculty/hotel/restroom lock Latchbolt retracted by knob/lever from either side unless outside is locked by 20 rotation of thumbturn. Deadbolt thrown or retracted by 90 rotation of thumbturn. When locked, key outside or knob/lever inside retracts deadbolt and latchbolt simultaneously. Outside knob/lever remains locked until thumbturn is restored to vertical position. Throwing deadbolt automatically locks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown all keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9456 LV9456 Corridor lock F13 Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or inside thumbturn. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside lever is always free for immediate egress. L9465 Closet/storeroom lock Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside. L9473 F21 Dormitory/bedroom lock Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or thumbturn inside. L9480 LV9480 Storeroom lock with deadbolt Latchbolt retracted by key outside or by lever or knob inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. (Previously XL11-591) L9485 x XL Prison function lock Latch retracted by key outside or knob inside. Outside knob always free spinning. Deadbolt only thrown or retracted by guard s key. Inside knob becomes fixed when deadbolt is thrown. Prisoner s key only retracts latchbolt. Furnished standard with tamper-resistant Torx screws. Specify per XL L9486 F15 LV9486 Faculty/hotel/restroom lock do not disturb indicator Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown do not disturb plate is displayed. All keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9486 x L LV9486 x L L9486 with occupied indicator Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown Occupied plate is displayed and all keys become inoperative except emergency keys. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. (Previously XL11-580) L9496 Privacy with occupied indicator Knob/lever retracts latchbolt from either side Deadbolt thrown or retracted by key outside (retraction by key required in the event of an emergency) or inside thumbturn. Throwing deadbolt locks outside knob/lever and displays Occupied plate. Rotating inside knob/lever simultaneously retracts both deadbolt and latchbolt, and unlocks outside knob/lever. Inside lever is always free for immediate egress. (Previously XL11-885) * In a double-door application where the dummy will be used as the strike order Armored front strike separately. Schlage L Series 19

12 Lock functions Double cylinder non-deadbolt functions Lock functions Double cylinder deadbolt functions Schlage ANSI L9060 F09 LV9060 Apartment entrance lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from inside. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. Schlage ANSI L9457 LV9457 Classroom security lock with deadbolt Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Inside lever is always free for immediate egress. L9071 LV9071 Classroom security lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Inside lever is always free for immediate egress. L9077 LV9077 Classroom security holdback lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Depress inside knob/ lever and turn key 360 for holdback feature. Inside lever is always free for immediate egress. L9466 F14 Store/utility room lock with deadbolt * Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. L9482 x XL LV9482 x XL Institution lock with deadbolt * Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Deadbolt thrown or retracted by key either side. Auxiliary latch deadlocks latchbolt when door is closed. Specify per XL L9082 F30 LV9082 Institution lock Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. L9082EL L9082EU L9082 electrically locked or electrically unlocked both sides * EL: Outside and inside knob or lever continually locked electrically. Latchbolt retracted by key either side. Switch or power failure allows outside and inside knob/lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. EU: Outside and inside knob/lever unlocked electrically. Latchbolt retracted by key either side. Switch or power failure keeps inside and outside knob/lever locked. Auxiliary latch deadlocks latchbolt when door is closed. (Previously XL11-452) In a double-door application where the dummy will be used as the strike order Armored front strike separately. *Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 20 Schlage L Series

13 Lock functions Full mortise deadlocks Lock functions Small mortise deadlocks Schlage L9460 ANSI F17 Cylinder x thumbturn lock Deadbolt thrown or retracted by key outside or thumbturn inside. L9462 F16 Double cylinder lock * Deadbolt operated by key from either side. L9463 Classroom lock Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt, but cannot project it. L9464 Cylinder lock F18 Deadbolt thrown or retracted by key from one side. No trim on opposite side. L9460 x XL L9460 with pull Knob/lever both sides fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. L9460 x XL Single cylinder deadlock with pull Deadbolt thrown or retracted by key outside or thumbturn inside. No latch, but inside knob or lever is spring-loaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever. Schlage ANSI L460 E06071 Cylinder x thumbturn lock Deadbolt thrown or retracted by key outside or thumbturn inside. L462 E06061 Double cylinder lock * Deadbolt operated by key from either side. L463 E06091 Classroom lock Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt, but cannot project it. L464 Cylinder lock E06081 Deadbolt thrown or retracted by key from one side. No trim on opposite side. L480 Door bolt Deadbolt thrown or retracted by thumbturn from one side. No trim on opposite site. L496 Deadbolt with occupied indicator Deadbolt thrown or retracted by key outside or thumbturn inside. When deadbolt is thrown Occupied plate is displayed. (Previously XL11-911) L9462 x XL Double cylinder deadlock with pull * Deadbolt thrown or retracted by key from either side. No latch, but inside knob/lever is springloaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever. L9464 x XL Deadlock with pull Deadbolt thrown or retracted by key from one side. No latch, but inside knob/lever is springloaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever. Schlage L Series 21

14 Schlage L Series universal transformation instructions The L9050 universal case can be transformed into nine different functions * with just a few additional parts. For some functions, additional parts are not necessary. ANSI function F04 Function type L9050 (w/thumbturn) office Function description Latchbolt operated by lever either side except when outside lever is made inoperative by a stop or other mechanical means other than key. When outside lever is locked, latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch. F01 L9010 passage Latchbolt operated by lever from either side at all times. F05 L9070 classroom Latchbolt operated by lever either side except when outside lever is locked from outside by key or push button mechanism. When outside is locked latchbolt is retracted by key or by operating key or push button, and outside lever from outside or by operating inside lever. Auxiliary deadlatch. F07 L9080 storeroom Latchbolt operated by key outside or by operating inside lever. Outside lever always inoperative. Auxiliary deadlatch. F09 L9060 apartment entrance Latchbolt operated by lever either side, except when made inoperative by key from inside. When outside is locked latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch. F31 L9080 (less outside cylinder) exit or communicating Latchbolt operated by inside lever. Non-removable blank trim or no trim outside. F32 L9071 classroom security Latchbolt retracted by lever either side except when outside lever is locked by key from inside or outside. When outside lever is locked latchbolt is retracted by key either side or by inside lever. Auxiliary deadlatch. L9080 (less outside lever) service Latchbolt operated by key outside or by operating inside lever. No outside lever. Auxiliary deadlatch. L9080 (less inside trim) utility Latchbolt retracted by key outside; outside lever always inoperative. No inside trim. Auxiliary deadlatch. L9070 (less inside trim) closet Latchbolt operated by lever on outside except when outside lever is locked from outside by key. When outside is locked latchbolt is retracted by key or by operating key from outside lever. Auxiliary deadlatch. * Assumes Everest cylinders and L9050 as base function (L chassis/l9050lb distributor lock case) only applies to sectional trim (not escutcheon). 22 Schlage L Series

15 Transformation instructions Additional part(s) Install cloverleaf cam cylinder on outside; install thumbturn assembly on inside. No additional parts required. Do not install thumbturn unit on inside or cylinder outside. Install chassis in the unlocked position. No additional parts required. Install cloverleaf cam cylinder on outside; do not install thumbturn assembly on inside. No additional parts required. Do not install thumbturn on inside. Install chassis in the locked position. Replace cloverleaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Cams B (Everest), K (IC and SFIC) or L or L for modular cylinders B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Do not install thumbturn on inside. Install cloverleaf cam cylinder on inside. Replace clover leaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Mortise cylinder assembly and cams B (Everest), K (IC and SFIC) or L or L for modular cylinders B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Do not install thumbturn unit on inside. Install chassis in the locked position. Install inside lever with L mounting plate; do not install outside lever or cylinder. Mounting plate L L Do not install thumbturn unit on inside. Install cloverleaf cam cylinder on inside and outside. Mortise cylinder assembly and cam L Cylinder Only Mortise cylinder assembly L L "/ 1 3 8"/ 1 5 8" Dim. X =.261 L Dim. X = "/ 1 1 2"/ 1 3 4" Do not install thumbturn unit on inside. Install chassis in the locked position. Replace cloverleaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Install inside lever with L mounting plate; do not install outside lever. Cams B (Everest), K (IC and SFIC), mounting plate L or L or L for modular cylinders L B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Do not install thumbturn unit on inside. Install chassis in the locked position. Replace cloverleaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Install inside lever on outside with L mounting plate; do not install inside lever. Cams B (Everest), K (IC and SFIC), mounting plate L or L or L for modular cylinders L B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Install cloverleaf cam cylinder on outside; do not install thumbturn assembly on inside. Install inside trim on outside with L mounting plate. Mounting plate L L Schlage L Series 23

16 Specifications Handing: L9000 Series lock bodies are field-reversible without disassembly. L400 Series locks are non-handed. Door thickness: 1 3 4" (44 mm) standard " (35 mm) to 2 1 2" (64 mm) optional. Over 2 1 2" (64 mm) door ranges vary by function. No escutcheon available for 1 3 4" (44 mm) doors standard. 2" to 2 3 8" (51 mm to 60 mm) optional. Specify door thickness if other than 1 3 4". Backset: 2 3 4" (70 mm) only. Armored front: L9000 Series: 1 1 4" x 8" x 7 32" (32 mm x 203 mm x 6 mm) standard " x 8" x " (27 mm x 203 mm x 6 mm) optional. L400 Series: " x 3 5 8" x 1" (113 mm x 92 mm x 25 mm) Case size: L9000 Series: " x " x 1" (113 mm x 154 mm x 25 mm) L400 Series: " x 3 5 8" x 1" (113 mm x 92 mm x 25 mm) Spacing: Knob or lever to cylinder, 3 7 8" (98mm); knob or lever to thumbturn hub, " (68mm). Bolts: 1" (25mm) throw stainless steel deadbolt and 3 4" (19mm) throw stainless steel latch with anti-friction tongue. Exposed trim: Knobs: #41 and #42 heavy-duty wrought brass, bronze or stainless steel knobs match D Series knobs. Levers: Forged brass or bronze and cast stainless steel. Designs available to match D Series levers. 93 Lever design: Extruded brass, bronze or stainless steel. Mediterranean designs: Forged-brass lever and rose. Escutcheons: L escutcheons are cold-forged brass or bronze and stainless steel. N escutcheons are heavy wrought reinforced brass, bronze and stainless steel. Trim combinations: Available with knob both sides, lever both sides, or knob and lever with rose or escutcheon both sides. Certifications ANSI: L9000: ANSI A Series 1000, Grade 1 Operational and Security, UL Listed for 3-hour fire door (except L9076 and L9007). With interchangeable core cylinders: Grade 2 Security. With concealed shell cylinder: A Grade 1 Operational and Security. ANSI/ASTM F Grade 40, UL Listed. L400: ANSI A156.5 Grade 1. California State Reference Code: (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1 2" of door face. UL / cul: All locks listed for A label single doors, 4' by 10'. Letter F and UL symbol on latch front indicate listing. Electrified functions are UL19X Listed for single-point locking applications. UL437 Listed locking cylinder optional: specify Primus Series cylinder. Door preparation for L9000 Series 8" 203 mm 1-1/4" 32 mm 2-3/4" 70 mm 4-1/2" 114 mm 3-7/8" 98 mm 1" 25 mm Door preparation for L400 Series 6-1/4 " 159 mm Strike: L9000 Series: ANSI curved lip strike 1 1 4" x 4 7 8" (32 mm x 124 mm) x " (30 mm) lip to center with dust box standard. L400 Series: 1 1 8" x 3 5 8" (29 mm x 92 mm) with dust box. Cylinder & keys: 6-pin Everest C123 keyway cylinder with two patented keys standard. 5-9/16" 141 mm 1-1/4" 32 mm 2-3/4" 70 mm 3-3/4" 95 mm 1" 25 mm Keying options: Interchangeable core and Primus high security cylinders. Master keying, grand master keying and construction keying. 4-1/2" 114 mm 34 Schlage L Series

17 How to order To order Schlage products, descriptive data should be in the same sequence as shown. Line item Qty Product Outside Inside Des Fin Des Fin Hand Front Strike Door thickness Ext Dim Additional details Line item number 2 Quality 3 Complete model number with function and cylinder type To order cylinder options, change P at the end of the model number as follows: L9453P L9453L L945C L9453J L9453R L9453T L9453BD L9453GD L9453HD L9453BDC Standard Less standard cylinder. For Primus cylinder, specify this option and order Primus cylinder separately. With temporary plastic construction cylinder. Double cylinder functions ordered less cylinder are furnished with these construction cylinders to maintain timing of key cams. Prepared for full size interchangeable core, less core. For Primus core, specify this option and order Primus core separately. With full-size conventional interchangeable core installed. Order control keys separately. With full-size (temporary) construction core installed. Order all keys separately. Prepared for small format (Falcon, Best, etc.) interchangeable core (SFIC), less core. With Everest B Family restricted keyway small format core installed. Order control keys separately. With small format keyed brass construction core installed. Order all keys separately. With small format disposable plastic construction core installed. 4/5 Outside design / finish. Specify tactile warning (knurling) here as 8 before lever design, e.g To specify complete design, combine the numeric knob or lever design with the alpha rose or escutcheon design. Example: 03L, 93A, 42B. When ordering Mediterranean design levers with L escutcheons, specify AST/00L, AVA/00L or MER/00L. 6/7 Inside design/finish. Leave blank if same as outside. 8 Hand. One hand per line item. 9 Front (use Strike field on Schlage form). Leave blank for standard armored front or enter number for narrow front. 10 Strike. Leave blank for standard or specify part number for optional strike. LLL = Less strike. 100 = 1" 118 = 1 1 8" 114 = 1 1 4" 138 = 1 3 8" 112 = 1 1 2" 134 = 1 3 4" 11 Door thickness, if non-standard. Example: 200 = 2". 12 Extension, to specify whether thick door is extended inside (EI), outside (EO), differently (ED) or equally (EE). 13 Dimension for strike lip lengths. See strike page for availability of specific dimensions with specific strikes. 14 Keying detail (e.g. key symbol, keyway, bitting) and other special requirements. 200 = 2" Example Line item Qty Product Outside Inside Des Fin Des Fin Hand Front Strike Door thickness Ext Dim Additional details 1 50 L9453P 03A 626 RH L9453P 03A 626 LH L A 626 RH L A LH L9456P 07L RH L9456P 07L 626 LH Note: Schlage order forms are available at no charge by contacting your Allegion security & safety consultant or customer service. Schlage L Series 35

18 L909x Series Electrified mortise Overview The Schlage L909x Series is the next generation of electrified mortise lock. The series utilizes the latest technology to offer tremendous utility and flexibility. Universal input voltage accepts 12 or 24V DC for installation flexibility User selectable fail safe/fail secure changing mode between EL and EU is as simple as flipping a switch on the lock case Low maximum current draw 0.4amps - allows multiple locks on a single power supply Low holding current 0.01 amps produces minimal heat, eliminating hot levers in electrically locking applications and allowing reliable operation even in poorly ventilated wood doors All-new RX switch monitors the inside lever with enhanced detection level that balances security with lever sensitivity New modular RX design RX can be added on at a later time without opening the lock case Standard Allegion Connect quick-connect Molex system (can be cut off if traditional wiring splicing preferred) UL listed for 3 hour fire door Available functions Models without deadbolt No cylinders L9090: Outside lever EL/EU L9091: Both levers EL/EU Outside cylinder L9092: Outside lever EL/EU * L9093: Both levers EL/EU Inside and outside cylinders L9094: Outside lever EL/EU L9095: Both levers EL/EU ** Deadbolt Models Outside cylinder, inside thumbturn L9492: outside lever EL/EU L9493: both levers EL/EU Inside and outside cylinders L9494: Outside lever EL/EU L9495: Both levers EL/EU Available options Request to Exit (RX) Latchbolt Monitor (LX) Door Position Sensor (DPS) - non-deadbolt functions only Deadbolt Monitor (DM) - deadbolt functions only *L9092 replaces L9080EL/EU; **L9095 replaces L9082EL/EU

19 Ordering instructions Order using standard Schlage order form as follows: L Series mortise indicators Function + cylinder Trim Finish Handing Option code L9092EUP 06A 626 RH RX, LX, DPS Lock specifications Function L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU, L9492EL/EU, L9493EL/EU, L9494EL/EU, L9495EL/EU (see front of datasheet for model details) Specifying EL or EU provides the factory pre-set position; setting can easily be changed by moving a switch on the lock case. Cylinder P (Everest 29 standard cylinder) L (Less cylinder) R (Everest 29 FSIC) Leave cylinder code blank if cylinder not applicable J (Less FSIC) T (Construction FSIC) GD (Everest 29 SFIC) BD (Less SFIC) BDC (Disposable SFIC) HD (Construction SFIC) Trim Finish Standard levers: 01, 02, 03, 05, 06, 07, 12, 17, 18, ACC, AST, LAT, LON, MER, OME Decorative levers: M51, M52, M53, M54, M55, M56, M57, M61, M62, M63, M81, M82, M83, M84, M85 Sectional (rose) designs: A, B, C, AVA (AST lever only), MER (MER lever only). Escutcheon designs: L and N. 605 Bright brass 613 Oil rubbed bronze 626AM Satin chrome anti-microbial 606 Satin brass 619 Satin nickel 629 Bright stainless steel 609 Satin brass, blackened 625 Bright chrome 630 Satin stainless steel 612 Satin bronze 626 Satin chrome Handing LH (Left Hand) RH (Right Hand) LR (Left Hand Reverse) RR (Right Hand Reverse) Option 630AM Satin stainless steel anti-microbial 643e Aged bronze RX (Request to Exit), LX (Latchbolt Monitor), DPS (Door Position Sensor, available non-deadbolt models), DM (Deadbolt Monitor, available deadbolt models). See pricebook for additional lock options. Note: Messaging indicators are not available for the L909x Series Allegion Connect The L909x Series electrified mortise comes standard with Allegion Connect, a factory-installed Molex connector system that utilizes quick-connect harnesses and hinges for simplified installation and maintenance. Alternately, the connector can be cut off and the lock installed with traditional wire splicing methods. Note that the Allegion Connect harnesses and hinges are sold separately. Allegion Connect cables Door type Hollow metal Wood 6" wire harness Con-6 Con-6P 12" wire harness Con-12 Con-12P 26" wire harness Con-26 Con-26P 32" wire harness Con-32 Con-32P 38" wire harness Con-38 Con-38P 44" wire harness Con-44 Con-44P 50" wire harness Con-50 Con-50P 192" wire harness Con-192 Con-192P 6" extension to power supply Con-6W Con-6W Variable length wiring harness (6 to 192 ) EPT or electrified hinge 6 wiring harness To power supply Note: Harness for hollow metal doors have connectors both ends; wood door harness comes w/connector on one-end with crimped pins on other w/attachable connector (required in wood doors due to more narrow cable raceway) About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 11/15

20 Sectional trim N escutcheon trim L Series mortise indicators Overview The 180 degree visibility indicator for the Schlage L Series mortise lock offers unparalleled visibility and flexibility. The unique features of the indicator make it ideally suited for classroom security applications as well as traditional occupied/vacant applications. N escutcheon indicators The L Series indicator features: 2" x 1 2" display for easy viewing at a distance 180 windows for visibility at any angle Cylinder Thumbturn Cointurn Emergency key High-mount placement for quick assessment during emergency lockdown High contrast colors (white/red, black/white) for ease of reading Sectional indicators Choice of four text and/or symbol messages Available for over 30 functions, for inside or outside of door Available in Sectional trim or N Escutcheon trim Cylinder Thumbturn Cointurn Emergency key Note: Indicators used on cylinder functions will require an additional door preparation hole. Sectional trim requires two mounting screws into door. Please reference product templates for details.

21 Available messages and option codes LOCKED OCCUPIED DO NOT DISTURB UNLOCKED VACANT Inside trim L L L L Outside trim L L L L Note: indicators available for inside or outside only; not possible to have an indicator on both inside and outside trim Ordering instructions To order an indicator as part of a new lock, specify the option code corresponding to the desired message (locked/unlocked, occupied/vacant, etc) and desired trim placement (inside or outside) at the end of the lock order. Order from Schlage using the standard order form as shown below. Please see pricebook for retrofit kits that allow indicator upgrades to installed Schlage L Series mortise locks. L Series mortise indicators Function + cylinder Trim Finish Handing Option code L9050P 06A 626 RH L Lock specifications Function Available with inside indicator: L/LV9040, 9044, 9050, 9056, 9060, 9071, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9466, 9473, 9480, 9485, 9350, 9371, 460, 462, 463, 480 Available with outside indicator: L/LV9040, 9044, 9050, 9056, 9060, 9070, 9071, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9464, 9465, 9466, 9473, 9480, 9485, 9350, 9370, 9371, 460, 462, 463, 464 Cylinder P (Everest 29 standard cylinder) L (Less cylinder) R (Everest 29 FSIC) J (Less FSIC) T (Construction FSIC) GD (Everest 29 SFIC) BD (Less SFIC) BDC (Disposable SFIC) HD (Construction SFIC) Leave cylinder code blank if cylinder not applicable Trim Standard levers: 01, 02, 03, 05, 06, 07, 12, 17, 18, ACC, AST, LAT, LON, MER, OME Decorative levers: M51, M52, M53, M54, M55, M56, M57, M61, M62, M63, M81, M82, M83, M84, M85 A, B, or C Sectional (Rose) design or N Escutcheon, AVA (AST lever only) and MER (MER lever only) also available. Finish 605 Bright brass 606 Satin brass 609 Satin brass, blackened 619 Satin nickel 625 Bright chrome 626 Satin chrome Handing LH (Left Hand) RH (Right Hand) 626AM Satin chrome anti-microbial 629 Bright stainless steel 630 Satin stainless steel 630AM Satin stainless steel anti-microbial 643e Aged bronze Option LR (Left Hand Reverse) RR (Right Hand Reverse) Specify indicator option code from table at top of page for desired message and placement Note: Can only specify an indicator for inside or outside trim; not possible to have indicators on both sides Ordering examples L9050P 03N 626 RH L Office function w/escutcheon locked/unlocked indicator on inside (thumbturn side) of door L9050P 06A 626 RH L Office function w/sectional locked/unlocked indicator on outside (cylinder side) of door About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 05/15

22 CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) 4040XP SERIES The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. n Cast Iron n Forged Steel Arm n Double Heat Treated Steel Pinion n All Weather Fluid n Non-Handed n LCN Patented Green Dial n Peel-n-Stick Templates for Fast and Accurate Installation n UL & cul Listed n 3/4 Journal Diameter Pinion n Full Compliment Bearing FEATURES *HINGE (pull) side mount shown n Standard 4040XP Series closer shipped with regular arm, standard plastic cover, and self reaming and tapping screws. n Non-sized cylinder is adjustable for interior doors to 5 0 and exterior doors to 4 0. n Closer mounts hinge side, top jamb, and parallel arm on either right or left swinging doors. n Closers to meet ADA requirements. n Standard or optional custom powder coat finish. n Optional plated finish on cover, arm, and fasteners. n Optional SRI primer for installations in corrosive conditions. (Available with powder coat finishes only.) n UL and cul listed for self-closing doors without hold-open. n Tested and certified under ANSI Standard A156.4, grade one. The 4040XP Series includes the LCN "Green Dial" Spring Force Indicator HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER NON-HANDED NON-SIZED ACCESSIBILITY CYLINDER DELAYED ACTION**** AVB*** REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK **ARM FUNCTION EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less than 5.0 lbs. opening force on 36 door. ** Maximum opening/hold-open point with standard template. *** Advanced Variable Backcheck. **** Delayed Action Closer incorporates standard 4041 Delay Cylinder. 37 PHONE FAX /14

23 4040XP SERIES MOUNTING DETAILS HINGE (PULL) SIDE MOUNTING MAXIMUM OPENING Templating allows up to 120. Hold-open points 90 up to 120 with hold-open arm. n Butt Hinges should not exceed 5 (127 mm) in width. n Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120. n Reveal should not exceed 3/4 (19 mm) for regular arm or hold-open arm. n Top Rail less than 3-3/4 (95 mm) requires PLATE, 4040XP-18. Plate requires 2 (51 mm) minimum. n Clearance of 2-3/8 (60 mm) behind door required for 90 installation. Options n 4041 Delayed action cylinder*. n Hold-open arm. n Metal cover. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120 to 70. Delay time adjustable up to approximately 1 minute. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN Product Support for assistance. 38 PHONE FAX /14

24 4040XP SERIES TOP JAMB (PUSH SIDE) MOUNTING MAXIMUM OPENING Templating allows up to 120. Hold-open points 85 up to 120 with hold-open arm. MOUNTING DETAILS n Butt Hinges should not exceed 5 (127 mm) in width. n Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120. n Reveal of 2-9/16 (65 mm) allows 120 opening for REGULAR ARM or standard Hold-open ARM. 4-13/16 (122 mm) allows up to 120 opening with LONG ARM where standard rod and shoe is replaced with optional LONG ROD AND SHOE 4040XP-79LR. Use H-LONG ARM with LONG HEAD AND TUBE, 4040XP-78HL for hold-open. 8 (203 mm) allows up to 120 opening with EXTRA LONG ARM where standard rod and shoe is replaced with optional EXTRA LONG ROD AND SHOE, 4040XP-79ELR. n Top Rail requires 1-1/4 (32 mm) minimum. 2-1/4 (57 mm) minimum with closer on PLATE, 4040XP-18TJ. 3 (76 mm) minimum with closer on PLATE, 4040XP-18G. n Head Frame less than 3-1/2 (89 mm) requires PLATE, 4040XP-18TJ. With flush ceiling, use PLATE, 4040XP-18G. Either plate requires 1-3/4 (44 mm) minimum. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120 to 70. Delay time adjustable up to approximately 1 minute. Options n 4041 Delayed action cylinder*. n Hold-open arm. n Metal cover. Customized installation templates or products may be available to solve unusual applications. Contact LCN Product Support for assistance. 39 PHONE FAX /14

25 4040XP SERIES MOUNTING DETAILS PARALLEL ARM (PUSH SIDE) MOUNTING Optional mounting requires PA SHOE, 4040XP-62PA for regular or HOLD-OPEN arms. Add prefix "P" to closer description (eg. P4040XP). P4040XP closer includes 4040XP-201 FIFTH HOLE SPACER to support PA SHOE. MAXIMUM OPENING 180 opening/hold-open points with all except CUSH arms. 110 opening/hold-open with CUSH arms. n Butt Hinges should not exceed 5 (127 mm) in width. Options n 4041 Delayed action cylinder*. n Hold-open, EDA, HEDA, CUSH, HCUSH, SPRING CUSH or SPRING HCUSH arm. n Metal cover. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN Product Support for assistance. n Auxiliary Stop is recommended at hold-open point, where the door cannot swing 180, or where CUSH-N-STOP arm is not used. n Clearance for 4040XP-62PA shoe is 4 (102 mm) from door face. EDA shoe projects 5-1/2 (140 mm) from door face. CUSH shoe projects 6 (152 mm) from door face. n Top Rail less than 5-3/8 (137 mm) measured from the stop requires PLATE, 4040XP-18PA. Plate requires 2 (51 mm) minimum from the stop. n Head Frame flush or rabetted requires PA SHOE ADAPTER, 4040XP-419. n Stop Width minimum 1 (25 mm). CUSH arm requires minimum 1-1/2 (38 mm). n Blade Stop clearance requires 1/2 (13mm) BLADE STOP SPACER, 4040XP-61. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120 to 70. Delay time adjustable up to approximately 1 minute. 40 PHONE FAX /14

26 4040XP SERIES EDA MOUNT 4040XP SERIES CUSH MOUNT 4040XP SERIES Mounting details are the same as 4040XP Series REGULAR or HOLD-OPEN except as listed below. 4040XP Series closers ordered with EDA or CUSH arms include 4040XP- 201 FIFTH HOLE SPACER to support the shoe. MAXIMUM OPENING EDA arm can be templated for points at: 110, A = 6-3/8 (162 mm) B = 7-3/4 (197 mm) or 180. A = 2-7/8 (73 mm) B = 4-1/4 (108 mm) Hold-open points up to maximum opening with HEDA arm. CUSH arms can be templated for opening/hold-open point at: 85, A = 7-15/16 (202 mm) B = 9-1/8 (232 mm) 90, A = 7-3/16 (183 mm) B = 8-1/2 (216 mm) 100, A = 6-1/16 (154 mm) B = 7-1/4 (184 mm) or 110. A = 5-1/16 (129 mm) B = 6-3/8 (162 mm) Spring Cush dead stop points are approximately 5 more than templated stop point. Hold open at templated stop points. MOUNTING DETAILS n Clearance for 4040XP-62EDA is 5-1/2 (140 mm) from door face. 6 (152 mm) for CUSH. n Head Frame flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419. n CUSH ARM requires SHOE SUPPORT, 4040XP-30 for fifth screw anchorage for narrow frames. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from maximum opening to ; 115 with 180 template, 95 with 110 template, 85 with 100 template, 75 with 90 template. Delay time adjustable up to approximately 1 minute. 41 PHONE FAX /14

27 4040XP SERIES ACCESSORIES CYLINDERS CYLINDER, 4040XP-3071 Heavy duty, non-handed cast iron cylinder assembly. CYLINDER, DEL Cylinder used for delayed action options. COVERS COVER, 4040XP-72 Standard, non-handed plastic cover. METAL COVER, 4040XP-72MC Optional, handed cover. Required for plated finishes and custom powder coat finishes DEL XP MC ARMS REGULAR ARM, 4040XP-3077 Non-handed arm mounts pull side or top jamb with shallow reveal. P4041 closer includes PA SHOE, 4040XP-62PA required for parallel arm mounting. PA SHOE, 4040XP-62PA Required for parallel arm mounting. LONG ARM, 4040XP-3077L Optional non-handed arm includes LONG ROD AND SHOE, 4040XP-79LR for top jamb mount. EXTRA LONG ARM, 4040XP-3077ELR Optional non-handed arm includes EXTRA LONG ROD AND SHOE, 4040XP-79ELR for top jamb mount with deep reveal. HOLD-OPEN ARM, 4040XP-3049 Optional, non-handed arm mounts pull side or top jamb with shallow reveal, hold-open adjustable shoe. 4040XP closer includes 4040XP-62PA shoe required for parallel arm mounting. LONG HOLD-OPEN ARM, 4040XP-3049L Optional non-handed arm includes LONG HEAD AND TUBE, 4040XP-3048L for top jamb mount. EXTRA DUTY ARM, 4040XP-3077EDA Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. HOLD-OPEN EXTRA DUTY ARM, 4040XP-3049EDA Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. Hold-open function is adjusted at the shoe. EXTRA DUTY ARM WITH 62G, 4040XP-3077EDA/62G Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance. HOLD-OPEN EXTRA DUTY ARM WITH 62G, 4040XP-3049EDA/62G Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance. Hold-open function is adjusted at the shoe. 79LR 79ELR 3048L EDA 3077EDA 3049EDA/62G 3077EDA/62G 62PA PHONE FAX /14

28 ARMS CONT. CUSH-N-STOP ARM, 4040XP-3077CNS Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe. HCUSH ARM, 4040XP-3049CNS Provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. 4040XP SERIES 3077CNS 3049CNS ACCESSORIES SPRING CUSH ARM, 4040XP-3077SCNS Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. 3077SCNS SPRING HCUSH ARM, 4040XP-3049SCNS Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function. 3049SCNS INSTALLATION ACCESSORIES PLATE, 4040XP-18 Required for hinge side mount where top rail is less than 3-3/4 (95 mm). Plate requires minimum 2 (51 mm) minimum top rail. 18 PLATE, 4040XP-18G Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition. Plate requires 1-3/4 (44 mm) minimum head frame. PLATE, 4040XP-18TJ Centers top jamb mounted closer vertically on head frame where face is less than 3-1/2 (89 mm). Plate requires 1-3/4 (44 mm) minimum head frame. PLATE, 4040XP-18PA Required for parallel arm mounting where top rail is less than 5-1/2 (140 mm), measured from the stop. Plate requires 2 (51 mm) minimum top rail. 18G 18PA 18TJ 43 PHONE FAX /14

29 4040XP SERIES ACCESSORIES INSTALLATION ACCESSORIES CONT. CUSH SHOE SUPPORT, 4040XP-30 Provides anchorage for fifth screw used with CUSH arms, where reveal is less than 3-1/16 (78 mm). BLADE STOP SPACER, 4040XP-61 Required to lower parallel arm shoe to clear 1/2 (13 mm) blade stop. PA FLUSH PANEL ADAPTER, 4040XP-419 Provides horizontal mounting surface for parallel arm shoe on single rabetted or flush frame AUXILIARY SHOE, 4040XP-62A Requires a top rail of 7 (178 mm). Optional shoe replaces -62PA for parallel arm mounting of regular arm with overhead holder/stop. 62A 44 PHONE FAX /14

30 TABLE OF SIZES 4040XP cylinders are adjustable from size 1 through size 6 and is shipped set to size 3. Closing power of 4040XP Series closers may be adjusted 50%. EXTERIOR (and VESTIBULE) DOOR WIDTH 24" 30" 36" 42" 48" 610mm 762mm 914mm 1067mm 1219mm size 3 size 4 size 5 size 6 *4040XP Minimum Door Width INTERIOR DOOR WIDTH 24" 34" 38" 48" 54" 60" 610mm 864mm 965mm 1219mm 1372mm 1524mm size 2 size 3 size 4 size 5 size 6 *4040XP Minimum Door Width * Adjustable Size 1 thru 6. Indicates recommended range of door width for closer size. REDUCED OPENING FORCE 4040XP SERIES CLOSERS CAUTION! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door. Refer to POWER OPERATORS section for information on systems that meet reduced opening force requirements without effecting closing power. * Maximum opening force. DOOR WIDTH 36" 42" 48" 8.5* lbs. 4040XP 4040XP 4040XP 5.0* lbs. 4040XP 4040XP 4040XP XP SERIES HOW-TO-ORDER 4040XP SERIES CLOSERS 1. SELECT FINISH Standard Powder Coat Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass. Closer will be shipped with: - STANDARD CLIP-ON COVER - SPECIFY ARM WHEN ORDERING - SELF-REAMING and TAPPING SCREWS, unless options listed below are selected. CLOSER OPTIONS CYLINDER Delayed Action (4041 DEL) COVER Metal (specify right or left hand) (MC) FINISH Custom Powder Coat (RAL) (handed metal cover required) Plated Finish, US (handed metal cover required) SRI primer (use with powder coat finishes only) ARM Regular (REG) Regular w/62pa (Rw/PA) Regular w/62a (R/62A) Long (LONG) Extra Long (XLONG) Hold-Open (H) Hold-Open w/62pa (Hw/PA) Long Hold-Open (HLONG) Extra Duty Arm (EDA) Extra Duty Arm with 62G (EDA/62G) Hold Open Extra Duty Arm (HEDA) (Handed) Hold Open Extra Duty Arm with 62(HEDA/62G)(Handed) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Spring Cush (SCUSH) Spring HCush (SHCUSH) OPTIONAL SCREW PACKS TB* w/self-reaming and Tapping (TBSRT) Wood & Machine Screw (WMS) TB*, Wood & Machine Screw (TBWMS) TORX Machine Screw (TORX) TB* & TORX Machine Screw (TBTRX) * Specify door thickness if other than 1-3/4. INSTALLATION ACCESSORIES Plate, 4040XP-18 Plate, 4040XP-18TJ Plate, 4040XP-18G Plate, 4040XP-18PA CUSH Shoe Support, 4040XP-30 Blade Stop Spacer, 4040XP-61 Auxiliary Shoe, 4040XP-62A PA Flush Panel Adapter, 4040XP-419 SPECIAL TEMPLATE ST- PHONE FAX /14 ORDERING INFORMATION

31 Vandal Resistant Trim A Hinges & Pivots B12 Pulls & Plates C Flush Bolts & Coordinators D Latches, Catches & Bolts E Stops VR900 RHR With black grip VR900 LHR With black grip VR904 RHR Without black grip VR904 LHR Without black grip For use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim. Includes built-in lock protector and cylinder cutout. Handed design allows trim to be positioned to coordinate with the centerline of inside hardware. Thru-Bolt Clearance Width Height Pattern Grip to Door Projection 7-1/ wide x 10 high 1-1/2 1-7/8 Finishes US Finish US32D BHMA 630 VR900LLP RH With black grip VR900LLP LH With black grip VR904LLP RH Without black grip VR904LLP LH Without black grip For use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim. Includes built-in lock protector and cylinder cutout. Handed design allows trim to be positioned to coordinate with the centerline of inside hardware. Thru-Bolt Clearance Width Height Pattern Grip to Door Projection 5-1/ /4 wide x 10 high 1-1/2 1-7/8 Finishes US Finish US32D BHMA 630 G Miscellaneous Hardware F Exterior Hardware B12 Ives Architectural hardware products

32 Protection Plates A Hinges & Pivots B14 Pulls & Plates C Flush Bolts & Coordinators 8400 Series Protection Plates Door protection plates are available in.050 thick brass, stainless steel or aluminum; and 1/8 thick high impact polyethylene in clear or black. Bevel edge options; specify B4E for all four edges. Mounting screw pack furnished standard, 16 screws per pack. Optional screw packs are available for TEK or TORK screw heads. Refer to the following chart for ordering. Specify NMH for no mounting holes. (Not available on 8402) Specify NMH-A for no mounting holes with adhesive. (Not available on 8402) Specify CS for counter sunk mounting holes. Specify ERS prepped with extra row of screws. Kickplate Gasket Tape Tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation. One tape pack will cover an the perimeters of a 8 x 34 kickplate. Order 8401 Gasket Tape. D Latches, Catches & Bolts E Stops F Exterior Hardware 8400 Protection Plate 8402 (UL)* Protection Plate *UL mark appears in upper right corner. Factory supplied screws must be used. Number of screw packs required by plate size (specify TEK Screws or TORK screws) Finishes brass 24 x 48 max. size US Number US3 US4 US10 US10B US15 US26 US26D BHMA Finishes stainless steel US Number US32 US32D BHMA G Miscellaneous Hardware B14 Ives Architectural hardware products Finishes aluminum US Number US28 BHMA 628 Finishes plastic Clear and Black Residential Grade Kickplates available Carded only, finishes PA28, PA3, PA619, PA716, B3, B505, B619, B716

33 Protection Plates A Hinges & Pivots B18 Pulls & Plates C Flush Bolts & Coordinators D Latches, Catches & Bolts Mop Plates Kick Plates Protect the bottom of the pull side of door subject to cleaning and mopping procedures. Size Ranges:4 to 6 high, 22 to 48 wide Protect the bottom of the push side of doors subject to scuffing from foot traffic. Recommended for all doors subject to normal use (especially doors using a closer). Size Ranges: 8 to 24 high, 22 to 48 wide Stretcher Plates Armor Plates Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment. Usually applied to push side of doors. Specify B4E Option for beveled edges. Size Ranges: 6 to 8 high, 22 to 48 wide Protect lower half of doors from abuse by hard carts, trucks and rough usage. Usually applied to push side of single doors and both sides of double acting doors. Size Ranges: 26 to 48 high, 22 to 48 wide G Miscellaneous Hardware F Exterior Hardware E Stops B18 Ives Architectural hardware products

34 Floor Stops FS18S FS18L FS18S FS18L Floor Stops Security Door Stops designed for use in high vandalism areas. Molded from black flame resistant, resilient material around a heavy-duty stud. Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed. Ideal for jail or security cell areas where floor mounted stops are required. FS18L also ideal for concrete wall applications. Dimensions FS18S Height: 1-1/2 FS18L Height: 3-1/2 A Hinges & Pivots B Pulls & Plates FS18S Diameter: 2 FS18L Diameter: 2 FS18S Stud Length: 2-1/2 FS18L Stud Length: 2-1/2 FS434 Floor Stop Burnished wrought steel. For undercut doors up to 1-1/2. Packed with screws and plastic anchors. Replaceable soft, resilient gray rubber. Dimensions Overall Height: 2-5/8 Base Size: 1-1/2 W x 2-3/4 L Finishes Ives Number USC C Flush Bolts & Coordinators D Latches, Catches & Bolts BHMA Floor Door Stop Burnished wrought steel. For undercut doors up to 1-1/2. Packed with screws and plastic anchors. Replaceable soft, resilient gray rubber. Dimensions Overall Height: 1-5/16 Base Diameter: 1-1/4 E5 Stops F Exterior Hardware Finishes brass Ives Number B3 B4 B5 B10B B15 B26 B26D BHMA Finishes aluminum Ives Number A3* A5 A14 A92 BHMA * only available in Slim-Pak of 25 Ives Architectural hardware products E5 G Miscellaneous Hardware

35 ASTRAGALS AND MEETING STILES Astragal and Meeting Stile Gasketing - Split Astragals Astragals and meeting stiles on double doors often present problems because of complex conditions and requirements. Pemko offers some simple and inexpensive solutions as well as more detailed ones. Each job should be carefully studied as to the specific requirements when selecting the appropriate gasketing. Note that some astragals consist of two parts, one for each door, and should be ordered as such. Punched with slotted holes for adjustment. Astragals and meeting stiles with a fire label may be mounted on pairs of doors wherein the gap meets the requirements of NFPA 80, The clearance between...the meeting edges of doors swinging in pairs on the pull side shall be 1/8 ± 1/16 (3.18mm ± 1.59mm) for steel doors and shall not exceed 1/8 (3.18mm) for wood doors. All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush. 297_S AVAILABLE FINISHES: A, BDG, D, G, PW, SN ALTERNATE INSERTS FOR _PK AVAILABLE FINISHES: A, BDG, D, G, PW, SN 297_V AVAILABLE FINISHES: A, BDG, D, G, PW, SN ASTRAGALS AND MEETING STILES 303_S AVAILABLE FINISHES: A, BDG, C, D, G, PW, SN 316_S AVAILABLE FINISHES: A, BDG, D, G ALTERNATE INSERTS FOR _PK AVAILABLE FINISHES: A, BDG, C, D, G, PW, SN 303_V AVAILABLE FINISHES: A, BDG, C, D, G, PW, SN ALTERNATE INSERTS FOR _PK AVAILABLE FINISHES: A, BDG, D, G 316_V AVAILABLE FINISHES: A, BDG, D, G 18041_NB AVAILABLE FINISHES: C, D, G, SN ALTERNATE INSERTS FOR _SB AVAILABLE FINISHES: C, D, G, SN NOTE: Brush should mesh from 1/32" to 1/16". AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) Special finishes available upon request VENTURA, CA USA MEMPHIS, TN USA VANCOUVER, BC CANADA TORONTO, ON CANADA 74 PH PH PH PH AM-2

36 COMMERCIAL THRESHOLDS Saddle Thresholds To use a saddle threshold in an offset condition, use an elevator (see page 37). 173_ AVAILABLE FINISHES: A, B, D, G COMMERCIAL THRESHOLDS 151_ AVAILABLE FINISHES: A, B, D, G 270_ AVAILABLE FINISHES: A, B, D, G 271_ AVAILABLE FINISHES: A, B, D, G, SN 272_ AVAILABLE FINISHES: A, B, D, G, SN 276_ AVAILABLE FINISHES: A, B, D, G 2748_ AVAILABLE FINISHES: A, D, G NOTE: Products shown in this section may not be drawn to scale. AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) A (Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) D (Dark Bronze Anodized) G (Gold Anodized) SN (Satin Nickel Anodized) NOTE: G, SN are available with limited inventory VENTURA, CA USA MEMPHIS, TN USA VANCOUVER, BC CANADA TORONTO, ON CANADA 30 PH PH PH PH CT-2

37 Ramps Note: A = Aluminum Thresholds can be ordered with E (Epoxy Abrasive), EL (Epoxy Abrasive Photoluminescent) or V3 (Full Body Strength) options. #233A #236A Thresholds.187"(4.7) End caps available upon request.750" (19.1) #233A 3.00" (76.2).500" (12.7).250" (6.4) #235A.125"(3.2) 3.00" (76.2).187"(4.7).500" (12.7) #236A #2361A 3.940"(100.1) wide (not shown) 6.00"(152.4).187"(4.7) 1.00" (25.4) #232A.500" (12.7) 6.00"(152.4).250" (6.4) #237A.125"(3.2) 3.500" (88.9).250" (6.4).500" (12.7) #234A 3.00"(76.2).187"(4.7).250" (6.4).250" (6.4).125"(3.2).187"(4.7) #238A.500" (12.7) #233A.500" (12.7) 3.500"(88.9).235"(6.0).250" (6.4) #237A.250"(6.4) #236A 3.500"(88.9) 6.00"(152.4) Full illustration not to scale.250" (6.4).125"(3.2) #238A.500" (12.7) #233A #236A 3.50"(88.9) 3.00"(76.2) Full illustration not to scale 6.00"(152.4) Specify Height.125"(3.2) Epoxy Abrasive 1 wide 1" Zero can manufacture ramps to your specifications, with an extremely durable epoxy abrasive or epoxy abrasive photoluminescent. Call our Engineering Department for information and specs. Specify Width Number of support legs to be determined by Zero ZRO13 PRODUCT CATALOG #90 PAGE 10