Geberit Product Catalog. February 2011

Transcription

1 Geberit Product Catalo February 2011

2 Table of Contents Concealed Installation System Product features, installation scenarios, system components Pae 4-5 Concealed Installation System Toilets Concealed Tank and Carrier for Wall-Hun toilets, 2x6 Installation Concealed toilet carrier frame with UP320 dual-flush tanks Concealed Tank and Carrier for Wall-Hun Toilets, 2x4 Installation Concealed toilet carrier frame with UP720 dual-flush tank Concealed Tank and Carrier for Wall-Hun Toilets, Pre-Wall Installation Concealed toilet carrier frame with UP200 dual-flush tank Concealed Tank for Floor-Mount Toilets Concealed UP320 dual-flush tank Concealed Installation System Urinals Concealed Carrier for Wall-Hun Syphonic Urinals Concealed urinal carrier frame Concealed Installation System Bidets Concealed Carriers for Wall-Hun Bidets Concealed bidet carrier, standard frame heiht Concealed bidet carrier, short frame heiht Concealed Installation System Lavatories Concealed Carriers for Wall-Hun Lavatories Concealed lavatory carrier, standard frame heiht Concealed lavatory carrier, short frame heiht Bath Waste & Overflow System Trim Finishes and Rouh-In Unit Materials 18 Selectin the Riht Size Bath Waste and Overflow 19 and 24 Bath Waste & Overflow System TurnControl TurnControl Rouh-in Units 20 TurnControl Remote Control Rouh-in Units 20 TurnControl Complete Units 20 TurnControl Trim Kits 21 TurnControl Remote Control Trim Kits 21 Bath Waste & Overflow System PushControl PushControl Complete Units and Accessories 22 Bath Waste & Overflow System Cascadin Tub Fillers TurnControl Cascadin Tub Fillers, Complete Units and Accessories 23 Geberit Express Look for this symbol throuhout the catalo for items that are available to ship via Geberit Express. Geberit North America s Geberit Express service enables next day shippin on select Geberit products. The requirements of the proram are as follows: Qualifyin products are marked with an symbol Please order qualifyin Geberit products, specifyin Geberit Express on the purchase order. The order must be received before 4:00 p.m. CST. The total order amount may not exceed $3,000. Only standard discounts will apply. Shipment options are UPS Ground, Second Day Air, or Next Day Air. Freiht chares are the responsibility of the distributor, prepaid and add only via Geberit invoice. No cancellations or chanes will be accepted after 4:00 p.m. CST on the day of order entry. Possession of this Catalo does not constitute an offer to sell Geberit product. Please refer to for our comprehensive terms and conditions.

3 Concealed Installation System Concealed Installation System Toilets Urinals Bidets Lavatories

4 Concealed Installation System Toilets Lavatories Bidets Urinals Distinctive Sustainable Uncompromisin Geberit Concealed Tank and Carrier Systems keep the unsihtly out of siht. Aesthetics. Safely hidden behind the wall, Geberit s in-wall technoloy allows unique beauty from floor to ceilin. Water Savin. Geberit Dual-Flush Technoloy provides an effective flush volume of 1.1 GPF, exceedin the 1.28 GPF Hih Efficiency (HET) standard. Space Savin. Desin possibilities are realized with eleance when the toilet is off the floor. For confined spaces, it s the ideal choice. Easy to Clean. Because the toilet is off the floor, cleanin the entire area is easy. Flexibility. The adjustable-heiht carrier allows you to position the toilet 15 to 19 off the floor for meetin ADA requirements or personal preference. Strenth and Stability. The Geberit Concealed Tank and Carrier System supports up to 880 lbs., exceedin ASME A strenth requirements. Accessible Maintenance. The Geberit system offers easy access to all internal components, includin the fill and flush valves, throuh decorative actuator flush panels. No tools are needed for simple chaneouts. 4.

5 Installation Scenarios The Geberit carriers are simple and easy to install. They require either a 2 x 4 or a 2 x 6 wood frame or metal frame construction. The studs must be placed apart for 2 x 4 installation and apart for 2 x 6 installation where the carrier will be positioned inside a wall. For pre-wall installations, frame to wall anchors are needed. System Components Wood frame in-wall installation, front activation. Toilet (See paes 6-13) Carrier Actuator Fixture* (Not supplied) Metal frame in-wall installation, front activation. Pre-wall installation, front activation. Pre-wall installation, top or front activation. Urinal (See pae 14) Carrier Actuator Fixture* (Not supplied) Concealed Installation System Bidets Toilets Urinals Lavatories Bidet (See pae 15) Carrier Fixture* (Not supplied) Lavatory (See pae 16) Carrier Fixture* (Not supplied) * Contact vitreous china manufacturer for complete selection of products. Refer to eberit.us for recommended manufacturers. The information and pricin contained in this document is subject to chane without notice. 5

6 Concealed Installation System Toilets Concealed Tank and Carrier for Wall-Hun Toilets, 2x6 Installation Dual-Flush Actuators Dimensions: 9.69 x 6.46 (24.6 cm x 16.4 cm) Style Material Finish Model No. List Price Bolero Plastic Alpine White $ Polished Chrome Matte Chrome Samba Plastic Alpine White Polished Chrome Matte Chrome Sima50 Zinc die cast Customer defined Alpine White Black DW Brushed Chrome GH White Pattern Glass SC Smoke Glass SD Green Satin Glass SE Sima20 Plastic Gloss-Matte-Gloss* KH White-Gloss-White* KJ Black-Gloss-Black* KM NEW Dual-Flush Push Buttons Dimensions: Halfmoon 3.15 (8 cm) diameter Square 4.25 x 4.25 (10.8 cm x 10.8 cm) Style Material Finish Model No. List Price HyTouch WC Plastic Polished Chrome $ Halfmoon HyTouch WC Plastic Alpine White Square Gloss-Matte** KA Sinle-Flush Push Buttons Dimensions: Round 2.44 (6.2 cm) diameter Square 4.25 x 4.25 (10.8 cm x 10.8 cm) WC20 Plastic Alpine White Round Polished Chrome Brushed SS FW HyTouch WC Plastic Alpine White Square Gloss-Matte** KA Concealed Tank and Carrier Frame Model No. Description List Price Concealed toilet carrier frame with UP320 dual-flush tank Sinle-Flush Actuators Dimensions: 9.69 x 6.46 (24.6 cm x 16.4 cm) Mambo Stainless Steel Brushed SS /4" (500 mm) 4 3 /4" (120 mm) 5 1 /2" (140 mm) min. NPT 1 /2" 2 3 /8" (60 mm) Tano Zinc die cast Alpine White Polished Chrome Matte Chrome Oil Rubbed Bronze HM ForeverShine IB PVD Polished Nickel ForeverShine ID PVD Brushed Nickel Sinle-Flush Infrared Battery Actuator Mambo Stainless Steel Brushed SS NEW 7 1 /8" or 9 1 /8" (180 or 230 mm) 4" (100 mm) FF 3 1 /2" (90 mm) 26 3 /8" (670 mm) 43"- 47" ( mm) X 12"-16" ( mm) 22" (558 mm) Finishd Rim Heiht (FRH) FRH = X plus 3" FF FRH * Colors follow this pattern = Plate-Rin-Button Gloss = Polished Chrome Matte = Matte Chrome ** Colors follow this pattern = Frame-Button Gloss = Polished Chrome Matte = Matte Chrome min. 4" (100 mm) 3 1 /2" (90 mm) Important: Not for syphonic bowls. Refer to for bowl manufacturers. Stud Front Center Pipe 6 The information and pricin contained in this document is subject to chane without notice.

7 Optional Accessories Mountin Accessories for Carrier Frames Frame to wall anchorin for $ (13-20 cm) thick unfinished pre-wall Frame to wall anchorin for (13-20 cm) thick unfinished pre-wall corner installations Support brackets for wall-hun toilets with small contact surface (thin profiles) Fire protection set for UP concealed dual-flush tanks; 90 min. fire resistance to DIN EN : Frame to wall anchorin where foot installations into floor are not allowed for (13-20 cm) thick unfinished pre-wall Frame to stud fastenin set for extended stud spacin from (50-65 cm) Frame to wall anchorin extensions for (20-40 cm) thick unfinished pre-wall Bowl Connection Sets and Accessories HDPE connection set with $ (2.5 cm) offset and mountin hardware (bowl installation kit); with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø55 supply inlet; matte chrome cover caps Acoustic insulation set for wall-hun toilets and bidets Connector set with mountin hardware (bowl installation kit), HDPE; Alpine White cover caps Cover caps with levelin washer, Plastic, Alpine White Required Accessories for (9-18 cm) Finished Wall Thickness Mountin rod extension set for wall-hun toilet and bidet, M12 Concealed Installation System Concealed Installation System Toilets Waste Fittins HDPE straiht connector with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø3.54 (Ø90 mm) outlet x 12 (31 cm) lon HDPE connector with offset for LH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet for 5.5 (13.97 cm) minimum walls only. HDPE connector with offset for RH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet for 5.5 (13.97 cm) minimum walls only. Cast iron outlet bend; 1 x bend with socket for Ø3.54 (Ø90 mm) push fit pipin and 3 CIP outlet HDPE Back-to-back connector for horizontal drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and expansion to Ø4.33 (Ø110 mm) outlet for (27.31 cm) minimum walls only. HDPE Back-to-back connector for vertical drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin and expansion to Ø4.33 (Ø110 mm) outlet for (27.31 cm) minimum walls only. Mud uard protection housin for UP320 and UP720, Plastic Extension set for actuator plates compatible with UP320, UP300, UP720 and UP200 flush tanks HDPE Connector set for extended installation and mountin hardware (bowl installation kit), with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø55 supply inlet; matte chrome cover caps Actuator Accessories for Push Buttons Cover plate for UP320, UP and UP720 flush tanks. Zinc die cast, Alpine white Cover plate for UP320, UP and UP720 flush tanks. Zinc die cast, Matte Chrome Cover plate for UP320, UP and UP720 flush tanks. Stainless Steel, Brushed SS Bidet Seat Accessory for Carrier Frames Water supply hose for bidet seat with , and carrier (UP320, UP200 and UP720). For addin bidet seat to an installed carrier. NEW The information and pricin contained in this document is subject to chane without notice. 7

8 Concealed Installation System Toilets Concealed Tank and Carrier for Wall-Hun Toilets, 2x4 Installation Dual-Flush Actuators Dimensions: 9.69 x 6.46 (24.6 cm x 16.4 cm) Style Material Finish Model No. List Price Bolero Plastic Alpine White $ Polished Chrome Matte Chrome Samba Plastic Alpine White Polished Chrome Matte Chrome NEW Concealed Tank and Carrier Frame Model No. Description List Price Concealed toilet carrier frame with $ UP720 dual-flush tank 39 1 /2" (1000 mm) 23 1 /4" (590 mm) R 1 /2 3 1 /2" (90 mm) 4 /5-2 1 /3" (20-60 mm) 39 1 /2" (1000 mm) Sima50 Zinc die cast Customer defined Alpine White Black DW Brushed Chrome GH White Pattern Glass SC Smoke Glass SD Green Satin Glass SE Sima20 Plastic Gloss-Matte-Gloss* KH White-Gloss-White* KJ Black-Gloss-Black* KM NEW 9 1 /8" (230 mm) /8" or 9 1 /8 (180 mm or 230 mm) 44 1 /16" (1200 mm) 24 3 /8" (620 mm) 16 1 /8" (410 mm) /4" (0-120 mm) /4" (0-120 mm) Sinle-Flush Actuators Dimensions: 9.69 x 6.46 (24.6 cm x 16.4 cm) Mambo Stainless Steel Brushed SS /3" (160 mm) 3 1 /2" (90 mm) 1 3 /4" (45 mm) Tano Zinc die cast Alpine White Polished Chrome Matte Chrome Oil Rubbed Bronze HM ForeverShine IB PVD Polished Nickel ForeverShine ID PVD Brushed Nickel NEW Sinle-Flush Push Buttons Dimensions: Square 4.25 x 4.25 (10.8 cm x 10.8 cm) HyTouch WC Plastic Alpine White Square Gloss-Matte** KA * Colors follow this pattern = Plate-Rin-Button Gloss = Polished Chrome Matte = Matte Chrome ** Colors follow this pattern = Frame-Button Gloss = Polished Chrome Matte = Matte Chrome Important: Not for syphonic bowls. Refer to for bowl manufacturers. 8 The information and pricin contained in this document is subject to chane without notice.

9 Optional Accessories Mountin Accessories for Carrier Frames Frame to wall anchorin for $ (13-20 cm) thick unfinished pre-wall corner installations Frame to wall anchorin where foot installations into floor are not allowed for (13-20 cm) thick unfinished pre-wall Frame to wall anchorin extensions for (20-40 cm) thick unfinished pre-wall Waste Fittins HDPE straiht connector with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø3.54 (Ø90 mm) outlet x 12 (31 cm) lon HDPE connector with offset for LH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet for 5.5 (13.97 cm) minimum walls only. HDPE connector with offset for RH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet for 5.5 (13.97 cm) minimum walls only. Cast iron outlet bend; 1 x bend with socket for Ø3.54 (Ø90 mm) push fit pipin and 3 CIP outlet HDPE Back-to-back connector for horizontal drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and expansion to Ø4.33 (Ø110 mm) outlet for (27.31 cm) minimum walls only. HDPE Back-to-back connector for vertical drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin and expansion to Ø4.33 (Ø110 mm) outlet for (27.31 cm) minimum walls only. Bowl Connection Sets and Accessories HDPE connection set with (2.5 cm) offset and mountin hardware (bowl installation kit); with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø55 supply inlet; matte chrome cover caps Acoustic insulation set for wall-hun toilets and bidets Bowl Connection Sets and Accessories (continued) Connector set with mountin $38.00 hardware (bowl installation kit), HDPE; Alpine White cover caps Cover caps with levelin washer, Plastic, Alpine White Required Accessories for (9-18 cm) Finished Wall Thickness Mountin rod extension set for wall-hun toilet and bidet, M12 Mud uard protection housin for UP320 and UP720, Plastic Extension set for actuator plates compatible with UP320, UP300, UP720 and UP200 flush tanks HDPE Connector set for extended installation and mountin hardware (bowl installation kit), with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø55 supply inlet; matte chrome cover caps Actuator Accessories for Push Buttons Cover plate for UP320, UP and UP720 flush tanks. Zinc die cast, Alpine white Cover plate for UP320, UP and UP720 flush tanks. Zinc die cast, Matte Chrome Cover plate for UP320, UP and UP720 flush tanks. Stainless Steel, Brushed SS Bidet Seat Accessories for Carrier Frames Water supply hose for bidet seat with carrier (UP720). For addin bidet seat to an installed carrier. For complete installation order with Water supply hose for bidet seat with , and carrier (UP320, UP200 and UP720). For addin bidet seat to an installed carrier. For complete installation order with NEW NEW Concealed Installation System Toilets The information and pricin contained in this document is subject to chane without notice. 9

10 Concealed Installation System Toilets Concealed Tank for Wall-Hun Toilets, Pre-Wall Installation Dual-Flush Actuators Dimensions: 8.31 x 5.59 (21.1 cm x 14.2 cm) Style Material Finish Model No. List Price Kappa50 Stainless Steel Brushed SS $ Zinc die cast Alpine White Polished Chrome Dual-Flush Push Buttons Dimensions: Halfmoon 3.15 (8 cm) diameter Square 4.25 x 4.25 (10.8 cm x 10.8 cm) HyTouch WC Plastic Polished Chrome Halfmoon HyTouch WC Plastic Alpine White Square Gloss-Matte** KA NPT 1 /2" 29 3 /4" (755 mm) Concealed Tank and Carrier Frame Model No. Description List Price Concealed toilet carrier frame with $ UP200 dual-flush tank 8 3 /4" (220 mm) 19 3 /4" (500 mm) 2 5 /8" (67 mm) 32 5 /16" (820 mm) 7 1 /8" or 9 1 /8" (180 or 230 mm) 6 3 /4" (171 cm) min. 3 1 /2" (90 mm) 3 5 /32" (80 mm) 24 7 /16" (620 mm) max /16" (910 mm) max /2" (750 mm) 15 3 /4" (400 mm) ** Colors follow this pattern = Frame-Button Gloss = Polished Chrome Matte = Matte Chrome FF 3 1 /2" (90 mm) /8" (0 200 mm) 12 5 /8" (320 mm) FF 2 7 /8" (73 mm) 1 7 /8" (48 mm) 3 1 /2" 4 5 /16" ( mm) Important: Not for syphonic bowls. Refer to for bowl manufacturers. 10 The information and pricin contained in this document is subject to chane without notice.

11 Optional Accessories Mountin Accessories for Carrier Frames Frame to wall anchorin for $ (13-20 cm) thick unfinished pre-wall Frame to wall anchorin for (13-20 cm) thick unfinished pre-wall corner installations Support brackets for wall-hun toilets with small contact surface (thin profiles) Frame to wall anchorin where foot installations into floor are not allowed for (13-20 cm) thick unfinished pre-wall Frame to stud fastenin set for extended stud spacin from (50-65 cm) Frame to wall anchorin extensions for (20-40 cm) thick unfinished pre-wall Waste Fittins HDPE straiht connector with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø3.54 (Ø90 mm) outlet x 12 (31 cm) lon HDPE connector with offset for LH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet for 5.5 (13.97 cm) minimum walls only. HDPE connector with offset for RH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet for 5.5 (13.97 cm) minimum walls only. Cast iron outlet bend; 1 x bend with socket for Ø3.54 (Ø90 mm) push fit pipin and 3 CIP outlet HDPE Back-to-back connector for horizontal drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and expansion to Ø4.33 (Ø110 mm) outlet for (27.31 cm) minimum walls only. HDPE Back-to-back connector for vertical drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin and expansion to Ø4.33 (Ø110 mm) outlet for (27.31 cm) minimum walls only. Bowl Connection Sets and Accessories HDPE connection set with $ (2.5 cm) offset and mountin hardware (bowl installation kit); with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø55 supply inlet; matte chrome cover caps Acoustic insulation set for wall-hun toilets and bidets Connector set with mountin hardware (bowl installation kit), HDPE; Alpine White cover caps Cover caps with levelin washer, Plastic, Alpine White Required Accessories for (9-18 cm) Finished Wall Thickness Mountin rod extension set for wall-hun toilet and bidet, M12 Extension set for actuator plates compatible with UP320, UP300, UP720 and UP200 flush tanks HDPE Connector set for extended installation and mountin hardware (bowl installation kit), with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø55 supply inlet; matte chrome cover caps Actuator Accessories Cover plate for UP200 flush tanks Plastic, Alpine white Cover plate for UP200 flush tanks Plastic, Polished Chrome Bidet Seat Accessory for Carrier Frames Water supply hose for bidet seat with carrier (UP200). For addin bidet seat to an installed carrier. For complete installation order with Water supply hose for bidet seat with , and carrier (UP320, UP200 and UP720). For addin bidet seat to an installed carrier. For complete installation order with NEW NEW Concealed Installation System Toilets The information and pricin contained in this document is subject to chane without notice. 11

12 Concealed Installation System Toilets Concealed Tank for Floor-Mount Toilets Dual-Flush Actuators Dimensions: 9.69 x 6.46 (24.6 cm x 16.4 cm) Style Material Finish Model No. List Price Bolero Plastic Alpine White $ Polished Chrome Matte Chrome Samba Plastic Alpine White Polished Chrome Matte Chrome Sima50 Zinc die cast Customer defined Alpine White Black DW Brushed Chrome GH White Pattern Glass SC Smoke Glass SD Green Satin Glass SE Sima20 Plastic Gloss-Matte-Gloss* KH White-Gloss-White* KJ Black-Gloss-Black* KM NEW Dual-Flush Push Buttons Dimensions: Halfmoon 3.15 (8 cm) diameter Square 4.25 x 4.25 (10.8 cm x 10.8 cm) Style Material Finish Model No. List Price HyTouch WC Plastic Polished Chrome $ Halfmoon HyTouch WC Plastic Alpine White Square Gloss-Matte** KA Sinle-Flush Push Buttons Dimensions: Round 2.44 (6.2 cm) diameter Square 4.25 x 4.25 (10.8 cm x 10.8 cm) WC20 Plastic Alpine White Round Polished Chrome Brushed SS FW HyTouch WC Plastic Alpine White Square Gloss-Matte** KA Concealed Tank Model No. Description List Price Concealed UP320 dual-flush tank $ Sinle-Flush Actuators Dimensions: 9.69 x 6.46 (24.6 cm x 16.4 cm) Mambo Stainless Steel Brushed SS /16" (440 mm) 16 1 /8" (410 mm) NPT 1 /2" 4 3 /4" (120 mm) 3 /4" 4 1 /2" (20 90 mm) 39 3 /4" (1000 mm) 39 3 /4" (1000 mm) Tano Zinc die cast Alpine White Polished Chrome Matte Chrome Oil Rubbed Bronze HM ForeverShine IB PVD Polished Nickel ForeverShine ID PVD Brushed Nickel 33 1 /4" (845 mm) 14 3 /8" (365 mm) 9 1 /4" (235 mm) 20" (510 mm) 42 1 /8" (1045 mm) 42 1 /2" (1080 mm) 16 1 /8" (410 mm) Sinle-Flush Infrared Battery Actuator Mambo Stainless Steel Brushed SS /16" (365 mm) NEW FF FF * Colors follow this pattern = Plate-Rin-Button Gloss = Polished Chrome Matte = Matte Chrome ** Colors follow this pattern = Frame-Button Gloss = Polished Chrome Matte = Matte Chrome Important: Not for syphonic bowls. 12 The information and pricin contained in this document is subject to chane without notice.

13 Optional Accessories Waste Fittin Dischare Confiurations A. Floor-Mount Rear Dischare into Wall FF FF FF B. Floor-Mount Rear Dischare into Floor C. Floor-Mount Direct Dischare into Floor Waste Fittins*** HDPE waste fittin outlet bend, $ x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin (For A dischare) and Ø3.54 (Ø90 mm) outlet HDPE connector with offset for LH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet (For A dischare) for 5.5 (13.97 cm) minimum walls only. HDPE connector with offset for RH horizontal drain connections (as viewed from sittin position), 1 x 90 bend with socket for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and Ø3.54 (Ø90 mm) outlet (For A dischare for 5.5 (13.97 cm) minimum walls only. Cast iron outlet bend; 1 x bend with socket for Ø3.54 (Ø90 mm) push fit pipin (For A dischare) and 3 CIP outlet HDPE Back-to-back connector for horizontal drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin, with 45º offset and expansion to Ø4.33 (Ø110 mm) outlet (For A dischare) for (27.31 cm) minimum walls only. HDPE Back-to-back connector for vertical drain connections; 2 x 90 bends with sockets for Ø3.54 (Ø90 mm) push fit pipin and expansion to Ø4.33 (Ø110 mm) outlet (For A dischare) for (27.31 cm) minimum walls only. PE Outlet connector for floor mount toilets with socket and lip seal for Ø4.33 (Ø110 mm) push fit pipin for Ø (For C dischare) (Ø mm) male connection EPDM seal for floor dischare toilet socket for Ø4.33 (Ø110 mm) (For B or C dischare) fittin ( ) Waste Fittins*** (continued) PP connector set with bend for $ Floor-Mount toilets with mountin hardware, 1 x 90 bends with socket for Ø4.33 (Ø110 mm) push fit pipin for Ø (Ø mm) male connection and expansion to (For A or B dischare) Ø4.33 (Ø110 mm) outlet HDPE drain connector with bend for horizontal applications, 1 x 90 bends with socket for Ø4.33 (Ø110 mm) push fit pipin (For B or C dischare) and Ø4.33 (Ø110 mm) outlet HDPE drain straiht connector for vertical applications with socket for Ø4.33 (Ø110 mm) push fit pipin and Ø4.33 (Ø110 mm) outlet (For B or C dischare) Required Accessories for (9 18 cm) Finished Wall Thickness Mud uard protection housin for UP320 and UP720, Plastic Extension set for actuator plates compatible with UP320, UP300, UP720 and UP200 flush tanks HDPE Connector set for extended installation and mountin hardware (bowl installation kit), with socket for Ø3.54 (Ø90 mm) push fit pipin and Ø2.16 (Ø55 mm) supply inlet; Matte Chrome cover caps Actuator Accessories Cover plate for UP320, UP and UP720 flush tanks. Zinc die cast, Alpine white Cover plate for UP320, UP and UP720 flush tanks. Zinc die cast, Matte Chrome Cover plate for UP320, UP and UP720 flush tanks. Stainless Steel, Brushed SS Concealed Installation System Toilets *** Mountin collar/clamp by installer The information and pricin contained in this document is subject to chane without notice. 13

14 Urinals Concealed Installation System Concealed Carrier for Wall-Hun Syphonic Urinals Actuators Dimensions: Square 5.12 x 5.12 (13 cm x 13 cm) Style Material Finish Model No. List Price Sima50 Zinc Die Cast Customer Defined $ Alpine White Mambo Stainless Steel Brushed SS FW Bolero Plastic Alpine White Polished Chrome Infrared Battery Actuator Mambo Stainless Steel Brushed SS FW NEW Optional Accessories Mountin Accessories for Carrier Frames Frame to wall anchorin for $ (13-20 cm) thick unfinished pre-wall Frame to wall anchorin for (13-20 cm) thick unfinished pre-wall corner installations Frame to wall anchorin where foot installations into floor are not allowed for (13-20 cm) thick unfinished pre-wall Frame to stud fastenin set for extended stud spacin from (50-65 cm) Frame to wall anchorin extensions for (20-40 cm) thick unfinished pre-wall Urinal Connection Sets and Accessories PE syphon trap with horizontal outlet and seal; Ø1.96 (Ø50 mm) outlet Carrier Frame Model No. Description List Price Concealed urinal carrier frame $ PE syphon trap with vertical outlet and seal; Ø1.97 (Ø50 mm) outlet 19 3 /4" (500 mm) 3" (75 mm) min. 3 1 /2" (90 mm) 4 3 /4" 12 5 /8" ( mm) min. 3 1 /2" (90 mm) NPT 1 /2" 6 11 /16" 14 9 /16" ( mm) 39 1 /2" 46 1 /2" ( mm) Required Accessories for (9-18 cm) Finished Wall Thickness Mountin rod extension set for wall-hun urinal, M8 3"-13 (90 mm- 330 mm) max /2" (650 mm) Mud uard protection housin and extension set for urinal carrier 44 1 /16" 51 3 /16" ( mm) 0 FF /8" (0 200 mm) /8" (0 200 mm) 2 7 /8" (73 mm) 1 7 /8" (48 mm) ASSE 1001 Certified Atmospheric Vacuum Breaker included. 14 The information and pricin contained in this document is subject to chane without notice.

15 Concealed Carriers for Wall-Hun Bidets Carrier Frames Model No. Description List Price Concealed bidet carrier, $ standard frame heiht 39 1 /2" (1000 mm) 19 3 /4" (500 mm) 3" 15" ( mm) 7" 9" ( mm) 44 1 /16" (1120 mm) 1 1 /2" (40 mm) Optional Accessories Mountin Accessories for Carrier Frames Frame to wall anchorin for $ (13-20 cm) thick unfinished pre-wall Frame to wall anchorin for (13-20 cm) thick unfinished pre-wall corner installations Frame to wall anchorin where foot installations into floor are not allowed for (13-20 cm) thick unfinished pre-wall Frame to stud fastenin set for extended stud spacin from (50-65 cm) Frame to wall anchorin extensions for (20-40 cm) thick unfinished pre-wall Concealed Installation System Bidets FF Bowl Connection Accessories Acoustic insulation set for wall-hun toilets and bidets /8" (0 200 mm) 2 7 /8" (73 mm) 1 7 /8" (48 mm) 4" (100 mm) min. Model No. Description List Price Concealed bidet carrier, $ short frame heiht Cover caps with levelin washer, Plastic, Alpine white Required Accessories for (9-18 cm) Finished Wall Thickness Mountin rod extension set for wall-hun toilet and bidet, M /4" (500 mm) 1 1 /2" (40 mm) 3" 15" ( mm) 7" 9" ( mm) 32 1 /4" (820 mm) FF /8" (0 200 mm) 2 7 /8" (73 mm) 1 7 /8" (48 mm) 4" (100 mm) min. The information and pricin contained in this document is subject to chane without notice. 15

16 Lavatories Concealed Installation System Concealed Carriers for Wall-Hun Lavatories Carrier Frames Model No. Description List Price Concealed lavatory carrier, $ standard frame heiht 39 3 /4" (1000 mm) For Ø2" (Ø50 mm) /8" (0 200 mm) FF 19 3 /4" (500 mm) 3 /16" 15" (5 380 mm) 6" (153 mm) 12" (306 mm) 3" (76 mm) 2 3 /4" (70 mm) 20 1 /2" (520 mm) 44 1 /16" (1120 mm) 31 1 /2" (800 mm) 2 7 /8" (73 mm) 2 3 /8" (60 mm) min. plus drain pipin 33 1 /2" (850 mm) 1 7 /8" (48 mm) Model No. Description List Price Concealed lavatory carrier, $ short frame heiht Optional Accessories Mountin Accessories for Carrier Frames Frame to wall anchorin for $ (13-20 cm) thick unfinished pre-wall Frame to wall anchorin for (13-20 cm) thick unfinished pre-wall corner installations Frame to wall anchorin where foot installations into floor are not allowed for (13-20 cm) thick unfinished pre-wall Fastenin set for sinks with (38-58 cm) mountin centers Frame to stud fastenin set for extended stud spacin from (50-65 cm) Frame to wall anchorin extensions for (20-40 cm) thick unfinished pre-wall Lavatory Connection Accessories Cover caps with levelin washer, Plastic, Alpine white Required Accessories for (9-18 cm) Finished Wall Thickness Mountin rod extension set for wall-hun lavatory, M /4" (500 mm) 2 3 /8" (60 mm) min. plus drain pipin 3 /16" 15" (5 380 mm) 33 1 /2" (850 mm) 2 3 /4" (70 mm) 38 9 /16" (980 mm) For Ø2" (Ø50 mm) /8" (0 200 mm) FF 6" (153 mm) 12" (306 mm) 3" (76 mm) 31 1 /2" (800 mm) 20 1 /2" (520 mm) FF 2 7 /8" (73 mm) 1 7 /8" (48 mm) 16 The information and pricin contained in this document is subject to chane without notice.

17 Bath Waste & Overflow Bath Waste & Overflow TurnControl PushControl Cascadin Tub Filler

18 Trim Finishes and Rouh-In Unit Materials Selectin a trim finish The distinctive contoured handles are offered in a wide variety of finishes to match almost any décor. ForeverShine finishes have been developed to ensure that the quality and look of the product on which it is applied will last a lifetime. Clean up is simple and requires no abrasive cleansers or chemicals so maintainin the initial factory finish is easy. We are so confident of this finish process that we provide a limited lifetime warranty on ForeverShine products installed in residential applications. Material Selection Tubular Plastic Plastic (polypropylene) is used chiefly for molded parts, electrical insulation, packain. Tubular Brass Brass is a yellowish alloy of copper and zinc used for enhancin items such as the Geberit BWO. Selectin a Remote The Geberit Remote BWO Cable Drain features the same quality and performance as our full line of bath waste and overflow products, but with remote access possibilities. Its unique two-headed desin ives you the flexibility of handle placement for ADA applications. Bath Waste & Overflow TurnControl PushControl Finish Metal Plastic Alpine White (11) Polished Chrome (21) Gold (45) Unfinished Brass (50) Bone (AA) Briht Brass (CL) Off White (DY) Biscuit (FF) ForeverShine PVD Brass (GG) Antique Brass (97) Old Silver Pewter (98) Satin Brass (CH) Black (EK) Satin Chrome (FT) ForeverShine PVD Brass (GG) ForeverShine PVD Pearl Nickel (HD) ForeverShine PVD Satin Sheen (HI) ForeverShine PVD Platinum (HJ) Hard Coat Oil Rubbed Bronze (HM) ForeverShine PVD Polished Nickel (IB) ForeverShine PVD Brushed Nickel (ID) ABS ABS (Acrylonitrile, Butadiene, Styrene) is a plastic that s hard and durable throuh a broad rane of temperatures. PVC PVC, polyvinyl chloride, a widely used thermoplastic polymer, is touh, dent-resistant; and maintains properties over lon periods of time. Joints Slip joints are used when the drain will be accessible for maintenance. Glued joints are used for non-accessible drains. Geberit supplies tubin for slip connections with their BWOs, but does NOT supply ABS/PVC pipin for lued connections. Cascadin Tub Filler 18 The information and pricin contained in this document is subject to chane without notice.

19 Selectin the Riht Size Bath Waste & Overflow For convenience, use this pae when sizin your cable lenth. Sizin a Geberit cable drain is simple and easy. Start with acquirin the Tub Depth (see Fiure 1), which serves as a rouh uide for your final selection. While the actual definition of tub depth varies by manufacturer and model, the measurement is used to et a rouh idea of the cable lenth you will need. Use the Standard Rouh-In Unit Cable Lenths chart (below) to determine that cable lenth based on your tub depth. Fiure 1 Rouh-in Unit Overflow Openin Centerline Tub Wall Overflow Depth (A) Tub Depth* Standard Rouh-In Unit Cable Lenths Key Typical Tub Depth* Cable Lenth 12" 16" ( ) 17" (432) 17" 24" ( ) 27" (678) 17" 24" ( ) 33" (828) 25" 29" ( ) 43" (1,079) 30" (753) 59" (1,481) * Varies by manufacturer and model number To assure your rouh calculations are correct and your BWO will function properly, however, please follow these steps (refer to Fiure 1). 1. Determine the Overflow Depth (A) which is the distance from the overflow center to drain mountin surface. 2. Determine the Drain Shoe Lenth (B) which is the distance from the drain centerline to the overflow mountin surface. 3. Choose material and joint connection type. Because material selection and joint preparations selection are covered by local codes, be sure a professional contractor is involved. Geberit offers the complete spectrum of BWO materials to assure Code Compliance (see pae 18). The materials offered are Tubular Polypropylene, Tubular Brass, ABS and PVC. 4. To determine the final size of your BWO for Tubular Slip-Joint Plastic/Brass cable drain, use Fiure 2* on pae 24. To Shoe Lenth (B) Drain Openin Centerline Geberit makes it easy to select the riht drain with the online Bath Drain Selector, Simply select a particular manufacturer and model number, bathtub size and the rouh-in material. determine the final size of your BWO for lued ABS/PVC cable drain, use Fiure 3* on pae Your information can now be used to find the part number on each type of Geberit BWO. Once you have determined the size and part number, you can also ive this information to your sales outlet so they can verify you have the riht Geberit model for your needs. * NOTE: For Fiure 2 and Fiure 3 Rouh-in unit sizin information, o to pae 24 (inside back cover ate fold) and open to view all information simultaneously. The information and pricin contained in this document is subject to chane without notice. 19 Bath Waste & Overflow TurnControl PushControl Cascadin Tub Filler

20 TurnControl Bath Waste & Overflow Bath Waste & Overflow TurnControl Rouh-In Unit Does not include Trim Kit (see pae 19) (Fits Tub Wall Thickness 1/16" 5/16") (Fis. A & B) Tub Cable Overflow Drain Shoe List Description Model No. Depth* Lenth Depth Lenth Price Tubular Plastic Rouh-In (Fi. A) " 16" 17" $ " Tubular plastic slip joint with PVC Tee connection " 27" " 24" 33" " 29" 43" " 59" Use Fiure on pae 24 Tubular Brass Rouh-In (Fi. A) " 24" 27" " Tubular Brass slip joint with Brass Tee connection Tubular Brass Rouh-In (Fi. A) " 24" 27" Brass Chicao Code Tee ABS Rouh-In (Fi. B) " 16" 17" " ABS Sch 40 for lued joint (Pipes not supplied) " 24" 27" " 24" 33" " " 59" Use Fiure on pae " 24" " 24" 33" " 29" 43" " 59" PVC Rouh-In (Fi. B) " " PVC Sch 40 for lued joint. (Pipes not supplied) TurnControl Remote Control Rouh-In Unit Does not include Trim Kit (see pae 21) (Fis. C & D) Tub Cable Overflow Drain Shoe List Description Model No. Depth* Lenth Depth Lenth Price Tubular Plastic Rouh-In (Fi. C) " 24" 59" ABS Rouh-In (Fi. D) " 24" 59" PVC Rouh-In (Fi. D) " 24" 59" TurnControl Rouh-In Unit (Non-Standard) Does not include Trim Kit (see pae 21) (Fits Tub Wall Thickness 1/16" 5/16") (Fi. A) Tub Cable Overflow Drain Shoe List Description Model No. Depth* Lenth Depth Lenth Price Tubular Plastic Rouh-In (Fi. A) Replaced by (Non-Standard) Replaced by Fully detailed information can be found at Replaced by " 24" 33" 30.50" 20.50" " 29" 43" 30.50" 30.00" Fi. A Tubular Rouh-In Unit Fi. B ABS/PVC Rouh-In Unit Fi. E Traditional TurnControl Complete Unit Fi. C Tubular Remote Control Rouh-In Unit Fi. D ABS/PVC Remote Control Rouh-In Unit Fi. F Euro TurnControl Complete Unit TurnControl TurnControl Complete Unit Includes Trim Kit and Tubular Plastic Rouh-In Unit (Fits Tub Wall Thickness 1/16" 5/16") (Fis. E & F) Model No. Tub Cable Overflow Drain Shoe Price Material Finish Traditional (Fi. E) Euro (Fi. F) Depth* Lenth Depth Lenth List Each Metal ForeverShine PVD Brushed Nickel ID ID.1 17" 24" 27" $ Plastic Polished Chrome " 24" 27" Use Fiure Off White DY DY.1 17" 24" 27" on pae Biscuit FF FF.1 17" 24" 27" Note: ForeverShine finishes ensure the quality and look of your Geberit BWO will last a lifetime. Geberit offers a limited lifetime warranty on ForeverShine products installed in residential applications. * Tub Depth is only a rouh calculation. To ensure proper cable lenth, refer to information on paes 19 and The information and pricin contained in this document is subject to chane without notice.

21 TurnControl Trim Kit Includes Handle and Pluner Model No. Material Finish Traditional Euro List Price Metal Polished Chrome $87.00 Hard Coat Oil Rubbed Bronze HM HM ForeverShine PVD Polished Nickel IB IB ForeverShine PVD Brushed Nickel ID ID Gold Antique Brass Old Silver Pewter Satin Brass CH Briht Brass CL Black EK Satin Chrome FT ForeverShine PVD Brass GG ForeverShine PVD Pearl Nickel HD ForeverShine PVD Satin Sheen HI ForeverShine PVD Platinum HJ Plastic Alpine White Gold Briht Brass CL Polished Chrome Bone AA AA Off White DY DY Biscuit FF FF ForeverShine PVD Brass GG GG TurnControl, Remote Control Trim Kit Order Two Trim Kits in desired finish. TurnControl Accessories ADA Handle Extension, Polished Chrome $25.00 For Metal Handles Only Test Plu Kit Extended Tub Wall Thickness Kit 3/8" 1/2", Tubular Plastic/Brass Rouh-In Extended Tub Wall Thickness Kit 3/8" 1/2", ABS/PVC Rouh-In Extended Tub Wall Thickness Kit 3/8" 1/2", Tub Filler Extended Tub Wall Thickness Kit 9/16" 3/4", Tubular/Brass Rouh-In Extended Tub Wall Thickness Kit 9/16" 3/4", ABS/PVC Rouh-In Extended Tub Wall Thickness Kit 9/16" 3/4", Tub Filler Traditional Plastic Handle Euro Plastic Handle Pluner ADA Handle Extension Test Plu Kit Extended Tub Wall Thickness Kit Traditional Metal Handle Euro Metal Handle Bath Waste & Overflow TurnControl The information and pricin contained in this document is subject to chane without notice. 21

22 PushControl Bath Waste & Overflow Bath Waste & Overflow PushControl Complete Unit (Fits Tub Wall Thickness 1/16" 1/2") Includes Trim Kit, Tubular Plastic Rouh-In Unit and Installation Tools Tub Cable Overflow Drain Shoe List Material Finish Model No. Depth* Lenth Depth Lenth Price Metal Polished Chrome " 16" 17" $ " 24" 27" " 24" 33" Hard Coat Oil HM.1 12" 16" 17" Rubbed Bronze HM.1 17" 24" 27" HM.1 17" 24" 33" ForeverShine IB.1 12" 16" 17" PVD Polished Nickel IB.1 17" 24" 27" IB.1 17" 24" 33" ForeverShine ID.1 12" 16" 17" PVD Brushed Nickel ID.1 17" 24" 27" ID.1 17" 24" 33" Plastic Polished Chrome " 16" 17" Use Fiure " 24" 27" on pae " 24" 33" Bone AA.1 12" 16" 17" AA.1 17" 24" 27" AA.1 17" 24" 33" Briht Brass CL.1 12" 16" 17" CL.1 17" 24" 27" CL.1 17" 24" 33" Off White DY.1 12" 16" 17" DY.1 17" 24" 27" DY.1 17" 24" 33" Biscuit FF.1 12" 16" 17" FF.1 17" 24" 27" FF.1 17" 24" 33" * Tub Depth is only a rouh calculation. To ensure proper cable lenth, refer to information on paes 19 and 24. PushControl Accessories PushControl Toolkit (Included with purchase of each PushControl $30.00 Complete Unit) PushControl Complete Unit PushControl Toolkit PushControl Note: ForeverShine finishes ensure the quality and look of your Geberit BWO will last a lifetime. Geberit offers a limited lifetime warranty on ForeverShine products installed in residential applications. Cascadin Tub Filler 22 The information and pricin contained in this document is subject to chane without notice.

23 Cascadin Tub Filler Bath Waste & Overflow Cascadin Tub Filler, TurnControl Complete Unit Includes Trim Kit, Tubular Brass Rouh-In Unit and Vacuum Breaker (Fi. A & B) Model No. Tub Cable Overflow Drain Shoe Tub Wall Material Finish Traditional Euro Depth* Lenth Depth Lenth Thickness List Price Metal Polished Chrome " 24" 27" 1/16" 5/16" $ " 24" 27" 3/8" 1/2" " 24" 27" 9/16" 3/4" ForeverShine PVD Brass GG GG.1 17" 24" 27" 1/16" 5/16" Use Fiure GG GG.1 17" 24" 27" on pae 24 3/8" 1/2" GG GG.1 17" 24" 27" 9/16" 3/4" ForeverShine PVD Brushed Nickel ID ID.1 17" 24" 27" 1/16" 5/16" ID ID.1 17" 24" 27" 3/8" 1/2" ID ID.1 17" 24" 27" 9/16" 3/4" * Tub Depth is only a rouh calculation. To ensure proper cable lenth, refer to information on paes 19 and 24. Fi. A Cascadin Tub Filler, Traditional TurnControl Complete Unit Fi. B Cascadin Tub Filler, Euro TurnControl Complete Unit Cascadin Tub Filler, TurnControl ADA Handle Extension For Metal Handles Only ADA Handle Extension, Polished Chrome $25.00 ADA Handle Extension Note: ForeverShine finishes ensure the quality and look of your Geberit BWO will last a lifetime. Geberit offers a limited lifetime warranty on ForeverShine products installed in residential applications. The information and pricin contained in this document is subject to chane without notice. 23

24 Fiure 2 Standard Tubular Slip Joint Rouh-In Unit Cable Lenth Confiuration Guide Use this chart to fiure cable needed for Plastic/Brass standard Tubular installations. Example: A Overflow Depth = 14" B Drain Shoe Lenth = 7.5" Requires a Rouh-In Unit with a cable lenth of 27". Custom installations can be achieved usin standard Tubular Rouh-In Units provided cable lenth is within acceptable rane illustrated by shaded areas in uide. Geberit recommends you review any custom installations with your sales outlet to assure you have the riht model for your needs. Overflow Depth in inches (mm) A 0 5" (127) 10" (254) 15" (381) 20" (508) 25" (625) 30" (762) 35" (889) 35" (889) 30" (762) 25" (625) B 59" 20" (508) 43" 15" (381) 33" Example 10" (254) 27" Drain Shoe Lenth in inches (mm) 5" (127) Cable Lenth 17" 0 Fiure 3 ABS/PVC Glued Rouh-In Unit Cable Lenth Confiuration Guide* Use this chart to fiure cable lenth needed for ABS/PVC lued custom installations. Shaded areas indicate acceptable rane of measurements for each cable lenth. Example: A Overflow Depth = 22.5" B Drain Shoe Lenth = 12.5" Requires a Rouh-In Unit with a cable lenth of 43". Geberit recommends you review any custom installations with your sales outlet to assure you have the riht model for your needs. * ABS/PVC pipes not supplied Overflow Depth in inches (mm) A 0 5" (127) 10" (254) 15" (381) 20" (508) 25" (625) 30" (762) 35" (889) 35" 30" 25" 20" 15" 10" 5" 0 (889) (762) (625) (508) (381) (254) (127) Drain Shoe Lenth in inches (mm) The information and pricin contained in this document is subject to chane without notice " B 43" 33" Example 27" Cable Lenth 17" Bath Waste & Overflow TurnControl PushControl Cascadin Tub Filler