Spring-Return Damper Actuator NF24(-S)
|
|
|
- Easter Powers
- 5 years ago
- Views:
Transcription
1 Spring-eturn Damper Actuator NF24(-S) For operation of air control dampers that perform safety function Torque: 7Nm Nominal voltage: AC/ Control: Open/Close Integrated auxiliary switch NF24-S Technical data Electrical data Nominal voltage 5/6Hz, Nominal voltage range AC 9..8, DC 2..8V Power consumption running / holding Wire/transformer sizing Auxiliary switch NF24-S 8VA 2 SPDT, 6(3)A, AC 25V Switching points, 85 Connection - otor Cable m, 2x.75mm 2 - Auxiliary switches NF24-S Cable m, 6x.75mm 2 Functional data Torque - otor - Spring min. nominal voltage min. 7Nm Direction of rotation Selectable by mounting / Angle of rotation ax. 95 (35...% adjustable by mechanical limiter) unning time Sound power level otor < 75s, spring return < 3s (Temp = 2 C) otor max. 55dB(A), Spring return approximately 62dB(A) Position indicationl echanical Protection class III (safety extra-low volatage) Service life > 6, full cycles Working conditions Degree of protection IP54 in any directions EC CE according to 89/336/EEC Dimensions / weight Ambient temperature Non-operation temperature Humidity test aintenance Dimension ( x W x H) Weight C C 95%H, non condensing (EN673- aintenance-free 248x98x97.5mm Approximately 3g Dimensions [mm]
2 Spring-eturn Damper Actuator NF24-S For operation of air control dampers that perform safety function Torque: 7Nm Nominal voltage: AC/ Control signal: DC 2()...V Position feedback: DC 2...V Technical data Electrical data Functional data Nominal voltage Nominal supply range Power consumption Wire/transformer sizing Connection cable Torque - otor - Spring Control signal Feedback signal Working conditions Direction of rotation Angle of rotation unning time Sound power level Position indication Service life Protection class Degree of protection Selectable by mounting / ax. 95 ( 35...% adjustable by rotation limiter) otor 5s, spring return <3s approximately (Temp=2 C) otor max. 55dB(A), Spring max. 62dB(A) echanical > 6, full cycles III (safety extra-low voltage) IP54 in any directions Dimensions / weight EC Ambient temperature Non-operation temperature Humidity test aintenance Dimensions ( x W x H) Weight 5/6Hz, AC 9..8V, DC 2..6V running / holding 6VA Cable m, 4x.75mm 2 min. nominal voltage min. 7Nm DC 2()...V (input impedance k ) DC 2...V CE according to 89/336/EEC,92/3/EEC,93/68/EEC C C 95%H, non condensing (EN673- aintenance-free 248 x 98 x 97.5mm Approximately 3g Dimensions [mm]
3 Spring-eturn Damper Actuator NF23(-S) For operation of air control dampers that perform safety function Torque: 7Nm Nominal voltage: AC 23V Control: Open/Close Integrated auxiliary switch (NF23-S) Technical data Electrical data Nominal voltage AC 23V 5/6Hz Nominal voltage range Power consumption Wire/transformer sizing AC V 7VA Connection cable - otor Cable m, 2x.75mm 2 - Auxiliary switches NF23-S Cable m, 6x.75mm 2 Functional data Torque - otor - Spring min. nominal voltage min. 7Nm Direction of rotation Selectable by mounting / Angle of rotation unning time Sound power level ax. 95 (35...% adjustable by rotation limiter) otor <75s, spring return <3s (Temp=2 C) otor max. 55dB(A), Spring approximately 62dB(A) Position indication echanical Service life > 6, full cycles Working conditions Degree of protection IP54 in any directions Dimensions / weight Auxiliary switch NF23-S Switching points EC ow Voltage Directice Protection class Ambient temperature range Non-operation temperature Humidity test aintenance Dimensions ( x W x H) Weight running / holding 2 SPDT, 6(3)A, AC 25V, 85 CE according to 89/336EEC CE according to 73/23/EEC II (totally insulated) C C 95%H, non condensing (EN673- aintenance-free 248x 98 x 97.5mm Approximately 3g Dimensions [mm]
4 Wiring diagrams Spring-eturn Wiring diagram: Open/Close actuators Notes: Parallel connection of several actuators is possible. Power consumption must be observed. AC 23V (for AF23..) S S2 S3 S4 S5 S6 % B = % AF23-S, AF24-S AF24, AF23 N AC 23V (for AF23..) N AC 23V (for NF23..) To isolate from the main power supply, the system must incorporate a device which disconnects the phase conductors ( at least a 3mm contact gap). 2 S S2 S3 2 S S2 S3 S4 S5 S6 > S < S S =..9 % AF23-S, AF24-S < < 85 NF23-S,NF24-S AF23, AF24 NF23, NF24 N AC.V (for TF23..) N AC 23V (for F23..) 2 S S2 S3 2 S S2 S3 > x < x x =...% TF23-S, TF24-S > x < x x =...% F23-S, F24-S TF23, TF24 F23, F24 5
5 Wiring diagrams Spring-eturn Wiring diagram: 3-Point actuators Notes: Connection via safety. Parallel connection of several actuators is possible. Power consumption must be observed. ~ T ounting side eversing switch a b a (Y b (Y 2) stop stop stop stop Y Y 2 TF24-3 ounting side eversing switch a b (Y ) (Y 2 ) stop stop stop stop ~ T F24-3 5
6 Wiring diagrams Spring-eturn Wiring diagram: odulating actuators Notes: Connection via safety. Parallel connection of several actuators is possible. Power consumption must be observed. ounting side Y DC 2()...V U DC 2...V eversing switch F24-S, AF24-S, AF24-S Y DC 2()...V U DC 2...V NF24-S easuring voltage U for position indicating or as master-slave control signal. For minimum position and override control consult manufacturers' literature ounting side eversing switch T + ~ ounting side Y U DC 2() V DC 2 V eversing switch 52 TF24-S
7 Auxiliary switch adjustment Auxiliary switch adjustment for Non-Spring-eturn Actuators. Press the push button, manually operate the universal clamp to desired switch position. 2. Turn switch pointer to the middle line. S2 S S3 S2 S3 S 3. When actuator moves clockwise (counterclockwise) to switch position, switch indicator passes the middle line counterclockwise (clockwise), the contact between S and S3 is disconnected (connected) and the contact between S and S2 is connected (disconnected). Note: The switching point should be about 5 from the mechanical end stops ( short step on the scale). 2 Auxiliary switch adjustment for Spring-eturn Actuators F..-S (ounting side ) Starting point: Actuator in safe position Procedure Turn the knob of the auxiliary switch until the tip of the arrow is pointing to the required switching position (see right). Example: Switching point setting = corresponds to 4% angle of rotation. When the actuator runs to the operating position (ccw ), the switch knob will also rotate counter-clockwise (ccw ) and the auxiliary switch will operate as the tip of the arrow passes the scale zero (S S3 linked). S2 S3 S S2 S3 S Fast unning Q.. Actuators operating controls and indicators 53
8 Electrical accessories Actuators CU U NU SU GU TF F NF AF AF S..A.. Auxiliary switch, add-on SA.. SPDT 3A (.5A), AC 25V S2A.. 2 SPDT 3A (.5A), AC 25V P..A.. Feedback potentiometer, add-on P4A.. 4Ω P5A.. 5Ω PA.. Ω P28A.. 28Ω P5A.. 5Ω PA.. Ω SGA24 Positioner for surface mounting...% eversible operating range DC...V or DC 2...V SG24 Positioner for surface mounting...% eversible operating range DC...V or DC 2...V SGE24 Positioner for rack mounting...% eversible operating range DC...V or DC 2...V SGF24 Positioner for front-panel mounting...% eversible operating range DC...V or DC 2...V ZAD24 Digital position indicator for front-panel mounting...99% Front size 72x72mm Operating range DC 2...V 2) 2) 2) 2) For...-S 2) For.-S 54
Nominal voltage Nominal voltage range Power consumption Wire / tranformer sizing. Connection: Motor LMU24(-S/-F) Cable 1m, 3x0.
LMU24(S/F/) For operation of air control dampers in HVAC system orque: 5Nm Nominal voltage: AC/DC 24V Control: Open/Close or 3point echnical data Electrical data Functional data Working conditions Nominal
Actuators for heating, ventilation, air conditioning 2. LF-2 -CD. Product Information Damper actuators with spring return.
Actuators for heating, ventilation, air conditioning 2. F-2 -CD Product Information Damper actuators with spring return F i6772 Contents Selection table orque 4 Nm F24 F24-S F23 F23-S F24-3 F24-S Nominal
Actuators for heating, ventilation, air-conditioning 2. LM-4 -CD. Product Information Damper actuators. i
Actuators for heating, ventilation, air-conditioning. LM-4 -CD Product Information Damper actuators LM i689 he complete range of damper actuators for general use in HVAC systems ype LM NM SM AM GM LF AF
Power consumption Wire/transformer sizing. Motor. Spring return. Motor. Spring return. EMC Low voltage directive
Technical data sheet NFU Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations Torque: 10Nm Nominal voltage: AC 4... 40V DC 4...15V
Power consumption In operation At rest For wire sizing. Connection Motor. Auxiliary switch
echnical data sheet SF24G-S-S2- Modulating spring return actuator with emergency function in the IP66 protective protecti e housing for adjusting air dampers in industrial plants and in technical building
Power consumption In operation At rest For wire sizing
echnical data sheet SF24G-S- Modulating spring return actuator with emergency function in the IP66 protective protecti e housing for adjusting air dampers in industrial plants and in technical building
Non-Spring Return SMU... series
Non-Spring Return SMU... series Product overview New Generation Non-spring return actuator Open/Close, 3-point AC 24 V 5/6 Hz, DC 24 V Auxiliary switch build-in SPD AC..24 V 5/6 Hz AC 23 V 5 Hz (Open/Close)
Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
echnical data sheet SH24A-SR.. Modulating linear actuators for adjusting air dampers and slide valves in ventilation and air conditioning systems in buildings For air dampers up to approx. 3 m 2 Actuating
2. A E LM Form-fit versions Linear adapter ZH-LM
Actuators for heating, ventilation, air-conditioning 2. A1-90122 - E LM Form-fit versions Linear adapter ZH-LM OEM at001707 at00205 Linear adapter ZH-LM: For LM2... damper actuators with universal spindle
See «Overview of types» 90 s / 60 mm 150 s / 100 mm Manual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool
echnical data sheet LHA-MF.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
Accessories. Technical Data Extension Height 2" Material. Stainless Steel. Bearing TR LRB (X) ARB (X) TF LF AF. Extension Bracket CCV-EXT-Kit
The CCV-EXT-KIT can be used with most CCV s* and PICCV in order to achieve a large clearance over the pipe. The Extension Kit will provide an additional 2 of space between the top of the valve and the
Technical data. Safety notes. Power consumption In operation At rest For wire sizing. 1.5 nominal torque 0.2 W 4 VA Auxiliary switch
echnical data sheet Damper actuator NM4A-S-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up
Mount directly to 1.05 jackshafts. (new ZG-120 bracket shown) EFB24-S N4, EFX24-S N4(H) EFB24-S, EFX24-S (p. 21)
EFB and EFX Series Spring Return Direct Coupled Actuator Minimum 70 in-lb Torque For damper areas up to 66 sq-ft* (For lower torque, see AFB, AF, NFB, LF, or TF series) Applications New standard clamp
AF Series Spring Return Direct Coupled Actuator
AF Series Spring eturn Direct Coupled Actuator Minimum in-lb torque For damper areas up to 5 sq-ft* (For lower torque, see NF, LF, or TF series) Applications emove for / to.5 shafts ZG6 or ZG 7 bracket
Technical data. Safety notes. Power consumption In operation At rest For wire sizing. 1 nominal torque 0.2 W 2 VA Auxiliary switch
echnical data sheet Damper actuator LM4A-S-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up
Fire and Smoke Damper Actuator product overview
Fire and Smoke Damper Actuator product overview Fire and Smoke protection Spring-Return Actuator BLF.. BF.. BFG.. FSLF..US FSNF..US FSAF..US Agency listing CE certification UL555 and UL555S Torque - Motor
In operation At rest For wire sizing
NMQ24A Damper actuator for adjusting air control dampers in ventilation and air-conditioning systems for building services installations orque 8Nm Nominal voltage AC/DC 24V Control: Open-close (not made
Electrical data Nominal voltage AC/DC 24V Nominal voltage frequency 50/60Hz
GR24A-5 / -7 GR24A-5 Rotary actuator for rotary valves GR24A-7 Rotary actuator for rotary valves Nominal torque 40Nm Nominal voltage AC/DC 24V Control Open-close echnical data Electrical data Nominal voltage
ZG-JSL, ZG-JSLA Jackshaft Retrofit Linkage For AF, NF, LF, NMX and AMX Series Actuators
ZG-JSL, ZG-JSLA Jackshaft Retrofit Linkage For AF, NF, LF, NMX and AMX Series Actuators The ZG-JSL jackshaft linkage is designed to easily attach to any part of a jackshaft and allow easy installation
Versatile and Powerful
AM Series Direct Coupled Actuator Versatile and Powerful Minimum 180 in-lb torque in a compact package. For damper areas up to 45 sq-ft* All Actuators have BDCM AM Series - At A Glance AMB(X)24-3 (p. 148)
AM Series Direct Coupled Actuator
AM Series Direct Coupled Actuator Versatile and Powerful Minimum 60 in-lb torque in a compact package. For damper areas up to 0 sq-ft*. Areas of Application Direct Coupled up to / standard shafts or Jackshafts
Versatile and Powerful
LM Series Direct Coupled Actuator Versatile and Powerful Minimum 45 in-lb torque in a compact package. For damper areas up to 11 sq-ft* Actuators in bold have BDCM LM Series - At A Glance LMB(X)24-3(-S)(-T)
See «Overview of types»
echnical data sheet SHA-.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air conditioning systems in buildings For air dampers up to approx. 3 m Actuating
LMX120-SR. Proportional Control, Non-Spring Return, Direct Coupled,100 to 240 VAC, for 2 to 10 VDC and 4 to 20 ma
LMX0-SR Proportional Control, Non-Spring Return, Direct Coupled,00 to 0 VAC, for to 0 VDC and to 0 ma Torque min. 5 in-lb for control of damper surfaces up to sq ft. Application For proportional modulation
FSAF24(-S) US, FSAF120(-S) US
FSAF4(-S) US, FSAF10(-S) US On/Off, Spring Return, Meets 50 F [11 C] for Half Hour, 75 Seconds Torque min. 133 in-lb, for control of air dampers Technical Data FSAF4(-S) US, FSAF10(-S) US Power supply
Minimum 27 in-lb Torque
LU Series Actuator Minimum 27 in-lb Torque For damper areas up to 6.8 sq-ft* Actuators in bold have BDCM LU Series - At A Glance LUB(X)24-3 (p. 351) LUX120-3 (p. 353) LUB(X)24-SR (p. 355) LUX120-SR (p.
Technical data. Safety notes
echnical data sheet SM4A-S-P Damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque Nm Nominal
NFB24, NFB24-S, NFX24, NFX24-S On/Off, Spring Return, 24 V
NFB4, NFB4-S, NFX4, NFX4-S On/Off, Spring Return, 4 V Torque min. 90 in-lb, for control of air dampers Technical Data Power supply Power consumption Transformer sizing Electrical connection NFB4... NFX4...
Minimum 27 in-lb torque
LU Series Actuator Minimum 27 in-lb torque For damper areas up to 6.8 sq-ft* All Actuators have BDCM LU Series - At A Glance LUB(X)24-3 (p. 258) LUB(X)24-SR (p. 260) LUX24-MFT (p. 262) Basic Product Flexible
Power consumption In operation At rest For wire sizing
echnical data sheet FA actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 2 m 2 orque 10 m ominal voltage
Power consumption In operation At rest For wire sizing
echnical data sheet actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 2 m 2 orque 10 m ominal voltage AC/DC
Power consumption In operation At rest For wire sizing. Connection Motor. Auxiliary switch
echnical data sheet actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx 4 m 2 orque 20 m ominal voltage AC/DC
Power consumption In operation At rest For wire sizing. Functional data Torque Motor Spring return. Rated impulse voltage Control pollution degree 3
SRFA Rotary actuator with emergency function for ball valves Torque 20Nm Nominal voltage AC 24...240V / DC 24...125V Control: Open/Close SRFA: Deenergised NC Technical data Electrical data Nominal voltage
NMQB24-MFT, NMQX24-MFT Quick Proportional Control, Non-Spring Return, Direct Coupled, 24V, Multi-Function Technology
NMQB-MFT, NMQX-MFT Quick Proportional Control, Non-Spring Return, Direct Coupled, V, Multi-Function Technology Application For proportional modulation of dampers in HVAC systems. Actuator sizing should
Technical data. Safety notes
echnical data sheet SMA-S-P Damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque m ominal voltage
Power consumption In operation At rest For wire sizing
echnical data sheet LHK24A-SZ Modulating SuperCap linear actuator with emergency setting function and extended functionalities for adjusting air dampers and sliders in ventilation and air-conditioning
GMX24-SR. Proportional Control, Non-Spring Return, Direct Coupled, 24V, for 2 to 10 VDC and 4 to 20 ma
Proportional Control, Non-Spring Return, Direct Coupled, 4V, for to 0 VDC and 4 to 0 ma Torque min. 360 in-lb for control of damper surfaces up to 90 sq ft. Application For proportional modulation of dampers
LF Series Spring Return Direct Coupled Actuator
LF Series Spring Return Direct Coupled Actuator Minimum in-lb torque LF actuator For damper areas up to 8 sq-ft* Applications Cost effective quality and performance for a range of applications including:
Electrical data Nominal voltage AC V / DC V Nominal voltage frequency
Technical data sheet NFG-S2-L Spring-return actuator with emergency control function for adjusting dampers in technical building installations Air damper size up to approx. 2 m² Nominal torque 10 Nm Nominal
LMCB24-SR LMCB24-SR-T. applications. Dimensions (All numbers in brackets are in millimeters.) 1/4 to 3/4 [6 to 20] 5/16 to 3/4 [8 to 26] 1.
![LMCB24-SR LMCB24-SR-T. applications. Dimensions (All numbers in brackets are in millimeters.) 1/4 to 3/4 [6 to 20] 5/16 to 3/4 [8 to 26] 1.](/thumbs/95/124319282.jpg "LMCB24-SR LMCB24-SR-T. applications. Dimensions (All numbers in brackets are in millimeters.) 1/4 to 3/4 [6 to 20] 5/16 to 3/4 [8 to 26] 1.")
LMCB4-SR (-T) Proportional Control, Non-Spring Return, Direct Coupled, 4V, for to 0 VDC and 4 to 0 ma Torque min. 45 in-lb for control of damper surfaces up to sq ft. LMCB4-SR LMCB4-SR-T HALOMO Brushless
Power consuption motor (motion) Power consuption standby (end position) Position feedback Auxiliary switch Contact load Switching point
Actuators Technical data sheet Rotary drive Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor Nominal Voltage Control Damper size Damper
Current consumption Auxiliary switch. Angle of rotation 90 (internal electrical stops) Running time
Technical data sheet Rotary actuator SY-4--T Rotary actuators for butterfly valves Torque 50 Nm Nominal voltage AC 4 V Control: Open-close or -point Auxiliary switch Technical data Electrical data Nominal
Minimum 90 in-lb Torque. Applications. NFB, NFX Series At A Glance. NFB and NFX Series Spring Return Direct Coupled Actuator
NFB and NFX Series Spring Return Direct Coupled Actuator Minimum 90 in-lb Torque For damper areas up to sq-ft* Applications 1 3/4 1/ New standard clamp fits standard 1/ shafts to 1.05 jackshafts. Mount
Power consumption In operation At rest For wire sizing. Cable 1 m, 2 x 0.75 mm 2 Cable 1 m, 6 x 0.75 mm 2 Functional data Torque Motor Spring return
echnical data sheet FA-S2 actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 2 m 2 orque 10 m ominal voltage
Power consuption motor (motion) Power consuption standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control of spring return actuator Description Spring-return actuator for adjusting and regulating dampers and valves in air conditioning and ventilation. Torque
Power consumption In operation At rest For wire sizing
echnical data sheet SFG- Spring return actuator with emergency function in the IP66 I protective protecti e housing for adjusting air dampers in industrial plants and in technical building installations
MX4X-6XXX Series MX4X-7XXX Series. Selection Guide. Applications. DuraDrive Series Actuators and Accessories
MX4X-6XXX Series MX4X-7XXX Series Selection Guide DuraDrive Series Actuators and Accessories Applications DuraDrive Direct Coupled Actuators are designed to accept two-position, floating, or proportional
Power consuption Motor (Motion) Power consuption Standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control of rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in ventilation and air conditioning
BELIMO CONTROLS
INDEX ACCESSORIES MECHANICAL CRANK ARM ADAPTOR KITS... 7-17 JACKSHAFT LINKAGE FOR SPRING RETURN DAMPER ACTUATORS... 7-17 MISCELLANEOUS... 7-17 MOUNTING BRACKETS... 7-17 DAMPER ACTUATORS FIRE AND SMOKE
Mount directly to 1.05 jackshafts. AF230 US (p. 02) AF230-S US (p. 20) AF24-S US (p. 18)
AF Series Spring Return Direct Coupled Actuator Minimum 133 in-lb torque For damper areas up to 35 sq-ft* (For lower torque, see NF, LF, or TF series) Applications Remove for 3/4 to 1.05 shafts ZG106 or
AF Series Spring Return Direct Coupled Actuator
AF Series Spring Return Direct Coupled Actuator Minimum in-lb torque For damper areas up to sq-ft* (For lower torque, see NF or LF series) Applications Direct Coupling - The Belimo Concept Remove for /
GMX On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 100 to 240 VAC
On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 00 to 40 VAC Torque min. 60 in-lb for control of damper surfaces up to 90 sq ft. Application For on/off and floating point control of dampers
Electrical data Nominal voltage AC 230 V Nominal voltage frequency
echnical data sheet NRA Rotary actuator for ball valves Nominal torque Nm Nominal voltage AC V Control Open-close, -point echnical data Electrical data Nominal voltage AC V Nominal voltage frequency 5/6
GM Series Direct Coupled Actuator
GM Series Direct Coupled Actuator Minimum 3 in-lb torque** For damper areas up to 8 sq-ft* Applications Linkage is part of inlet vane assembly supplied by manufacturer. Actuator is mounted to vortex frame.
Non-Spring Return EconoDrive Floating Actuator
MF4D-0x Series Non-Spring Return EconoDrive Actuator EconoDrive overshaft actuators are designed to provide an economical and reliable solution for many overshaft damper and ball valve requirements. All
NMB (X) 24-MFT. Proportional Control, Non-Spring Return, Direct Coupled, 24V, Multi-Function Technology
NMB (X) -MFT Proportional Control, Non-Spring Return, Direct Coupled, V, Multi-Function Technology Torque min. 90 in-lb for control of damper surfaces up to sq ft. Technical Data NMB(X)-MFT Power Supply
Product Cross Reference
AF120 US, AF120-S US AF230 US, AF230-S US AFBUP, AFBUP-S, AFXUP, AFXUP-S Torque 133 in-lb [15 Nm] minimum 180 in-lb. [20 Nm] minimum OPERATION Running Time Noise Level < 75 seconds
AFXUP-S (p. 19) AFB24-MFT. AFXUP (p. 19) AFBUP-S
AF and AFX Series Spring eturn Direct Coupled Actuator Minimum 180 in-lb Torque For damper areas up to 4 sq-ft* (For lower torque, see AF, NF, NFX, LF, or TF series) Applications 1 3/4 1/2 New standard
LF Series At A Glance
LF Series Spring Return Direct Coupled Actuator Minimum 35 in-lb Torque For damper areas up to 8 sq-ft* Applications Cost effective quality and performance for a range of applications including: Classroom
Power consuption Motor (Motion) Power consuption Standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor
Characterised Control Valves with Actuators
Characterised Control Valves with Actuators echnical Databook Version 6.2 Belimo Asia Pacific Product Overview and able of Contents able of Contents 2 Control Valves and Actuators Product Overview 3 Characterised
AMB24-3(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 24 V
AMB4-3(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 4 V Torque min. 80 in-lb for control of damper surfaces up to 45 sq ft. Application For on/off and floating point control of
SM24A. Technical data. Dimensions [mm]
![SM24A. Technical data. Dimensions [mm]](/thumbs/89/97487277.jpg "SM24A. Technical data. Dimensions [mm]")
SM24A Damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services orque 2Nm Nominal voltage AC/DC 24V Electrical data Nominal voltage AC 24V, 5/6Hz / DC
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
Technical data sheet DRK24A-5 SuperCap rotary actuator with emergeny control function and extended functionalities for butterfly valves Nominal torque 9 Nominal voltage AC/DC 24 V Control Open-close Design
LMB24-3 (-S)(-T) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 24 V
LMB- (-S)(-T) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, V Torque min. 5 in-lb for control of damper surfaces up to sq ft. Technical Data LMB- on/off-floating Power Supply VAC ±
Actuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
Actuators for air shutters 4Nm. 2 or 3 points control. Advantages: Selection model table. Runing time. Shutter s area
Actuators for air shutters 4Nm 2-3 points control Lufberg presents actuators with torque 4Nm for using in heating, air conditioning and cooling systems. High quality level DA04N serie are intended for
D-70, D-140, D-210, and D-280 Series Electric Non-Spring Return Actuators
Installation D-70, D-140, D-210, and D-280 Series Electric Non-Spring Return Actuators IMPORTANT: The D- Series actuators are intended to control equipment under normal operating conditions. Where failure
M9216 Series Electric Spring Return Actuators
*34636461G* 34-636-461, Rev. J Installation Instructions M9216 Issue Date October 217 M9216 Series Electric Spring Return Actuators Installation IMPORTANT: The M9216 Series actuator is intended to control
ZG106 or ZG 107 bracket
NF Series Spring Return Direct Coupled Actuator Minimum 60 in-lb torque For damper areas up to 15 sq-ft* Applications K4-1 US Clamp ZG106 or ZG 107 bracket Mount directly to 1.05 jackshafts with accessory
Minimum 18 in-lb Torque. Applications. TF Series At A Glance. TF Series Spring Return Direct Coupled Actuator. For damper areas up to 4.
TF Series Spring Return Direct Coupled Actuator Minimum 18 in-lb Torque For damper areas up to 4.5 sq-ft* Applications Cost effective quality and performance for a range of applications including: Classroom
SQN9... Damper Actuators. Building Technologies HVAC Products. SQN9..., front (covers removed) SQN9..., rear (covers fitted)
7 806 SQN9..., front (covers removed) Damper Actuators SQN9..., rear (covers fitted) SQN9... Reversible electromotoric actuators for air dampers and valves of oil or gas burners of small to medium capacity.
Current consumption Auxiliary switch. Angle of rotation 90 (internal electrical stops) Running time
Technical data sheet Rotary actuator SY-4--T Rotary actuators for butterfly valves Torque 5 Nm Nominal voltage C 4 V Control: Open-close or -point uxiliary switch Technical data Electrical data Nominal
Minimum 18 in-lb Torque
CM Series Direct Coupled Actuator Minimum 18 in-lb Torque For damper areas up to 6.8 sq-ft* Actuators in bold have BDCM CMB Series - At A Glance CMB24-3 (p. 311) CMB24-3-T (p. 311) CMB120-3 (p. 313) CMB24-SR-R
MVF461H Series Modulating Control Valves with Magnetic Actuators, Positioning Control and Position Feedback for Hot Water and Steam
Document No. 125-4361 VF461H Series odulating Control Valves with agnetic Actuators, Positioning Control and Position Feedback for Hot Water and Steam Description Control valves with magnetic actuators,
AMB24-3(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 24 V
AMB-(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, V Torque min. 80 in-lb for control of damper surfaces up to 5 sq ft. Application For on/off and floating point control of dampers
Electrical data Nominal voltage AC 24 V Nominal voltage frequency
Technical data sheet Globe valve actuator with emergency control function for 2-way and 3-way globe valves Actuating force N Nominal voltage AC 24 V Control 3-point Nominal stroke 2 mm Design life SuperCaps:
Power consumption In operation At rest For wire sizing. Non-operating temperature
echnical data sheet DRC4G--7 Rotary actuator for butterfly valves for outdoor applications orque 90 Nm (not constant) Nominal voltage AC/DC 4 V Control: Open-close IP66 Optimum protection against moisture
DA-053 Series. Overview. Applications. Features & Benefits. Datasheet. 53lb-in (6 Nm), Non-Spring Return Damper Actuators
Datasheet 53lb-in (6 Nm), Non-Spring Return Damper Actuators Overview The direct-coupled fail-safe/failin-place electronic actuators are designed for modulating, two position, and floating control of laboratory
Actuators for air dampers and control valves of oil burners
7 812 ISO 9001 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Run times: - SQM1...
LF Series Spring Return Direct Coupled Actuator
LF Series Spring Return Direct Coupled Actuator Minimum in-lb torque For damper areas up to 8 sq-ft* LF actuator Applications Cost effective quality and performance for a range of applications including:
Commercial Actuator Selection Chart Non-Spring Return
Commercial Actuator Selection Chart Non-Spring Return Control Signal Position Feedback Torque Aux. Switches Actuator Model 4 VAC Power Input On/Off Tri-State Floating 0 to 0 VDC 0 to 0 ma* 4 to 0 ma 0
NVCB 9000 series Ball Valves with Characterised Disc 2-way Flanged DN 100/DN 125/DN 150
NVCB 9000 series Ball Valves with Characterised Disc 2-way Flanged DN 100/DN 125/DN 150 NVCB 9000 series NENUTEC ball valves with characterised discs are especially designed and produced for applications
S10010 / S SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS 10/20 Nm (88/177 lb-in) FOR MODULATING AND FLOATING CONTROL SPECIFICATIONS GENERAL
S000 / S000 SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS 0/0 Nm (88/77 lb-in) FOR MODULATING AND FLOATING CONTROL GENERAL These direct-coupled damper actuators provide modulating / floating control for:
TRF.. series spring return rotary actuators for CCV
TF.. series spring return rotary actuators for CCV Spring return rotary actuators: For ball valves DN 5.. Torque: 2 Nm Modulating control TF24-S (C/DC 24 V) Floating (3-point) control TF24-2 (C/DC 24 V)
Electromotoric Actuators
4 505 SQL3500 SQL8500 Electromotoric Actuators for VKF46 butterfly valves SQL3500 SQL8500 SQL35, SQL36E operating voltage AC 230 V, 3-position control signal SQL85 operating voltage AC 24 V, 3-position
Power consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
Technical data sheet GK24G- SuperCap rotary actuator with emergency setting function and extended functionalities in the IP66 protective housing for adjusting air dampers in ventilation and air-conditioning
Dimensions [All numbers in brackets are in millimeters.] K4-2 US (supplied) 1/2" Centered (Default) 3/4" Centered (Field Selectable)
![Dimensions [All numbers in brackets are in millimeters.] K4-2 US (supplied) 1/2 Centered (Default) 3/4 Centered (Field Selectable)](/thumbs/75/72188842.jpg "Dimensions [All numbers in brackets are in millimeters.] K4-2 US (supplied) 1/2 Centered (Default) 3/4 Centered (Field Selectable)")
NF24-SR (-S) US Proportional Damper Actuator, Spring Return Fail-Safe, 24 V for 2 to 1 VDC, or 4 to ma Control Signal. Output Signal of 2 to 1 VDC for Position Indication Torque min. 6 in-lb, for control
G3 (D) 3-way Globe Valve, Bronze Trim
G3 (D) 3-way Globe Valve, Bronze Trim pplication This valve is typically used in ir Handling Units on heating or cooling coils and Fan Coil Unit heating or cooling coils. Some other common applications
Electromotoric Actuators
4 506 SQL33 Electromotoric Actuators for valves with 90 angle of rotation SQL33 operating voltage AC 230 V SQL33 operating voltage AC 230 V operating voltage AC 24 V 3-position control signal Nominal angle
Electromotoric actuators
s 4 520 ACVATIX TM Electromotoric actuators SQL321B.. SQL361B.. For VKF42.. butterfly valves SQL321B.. Operating voltage AC 220 V, 2-position (SPDT) control signal SQL361B.. Operating voltage AC 220 V,
Mechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
Actuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
N05, N10 SERIES NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND TWO-POSITION CONTROL
N05, N10 SERIES NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND TWO-POSITION CONTROL SPECIFICATIONS PRODUCT DATA Supply voltage CN6105/CN6110 Nominal voltage CN6105/CN6110 24 Vac/dc
S1024-2POS / S POS S2024-2POS / S POS
GENERAL S0-POS / S00-POS S0-POS / S00-POS SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS 0/0 Nm (88/77 lb-in) FOR -POSITION CONTROL These direct-coupled damper actuators provide two-position control for:
pressure independent characterized control tm
5 pressure independent characterized control tm valves (PICCV ) PICCV reacts to pressure variations, performing a continual balancing function to maintain system performance at varying loads. Wide range
Flowrite EA 599 Series SKD Electronic Valve Actuator 24 Vac Proportional Control
Flowrite EA 599 Series SKD Electronic Valve Actuator 24 Vac Proportional Control Document No. 55-8P25 EA 599-4 EA379R Description The Flowrite EA 599 Series SKD Electronic Valve Actuator requires a 24
Characterised Control Valves with Actuators
Characterised Control Valves with Actuators Technical Databook Version 8.6 Belimo Asia Pacific Contents Control Valves and Actuators Product Overview 4 Characterised Control Valve 6 Sizing of Ball Valves
Electro Controls. Damper Actuators / Valve Motors WattsIndustries.co.uk
Electro Controls Damper Actuators / Valve Motors - 2017 WattsIndustries.co.uk Damper Actuators / Valve Motors Section 21 DAMPER / VALVE MOTORS 4Nm 2 & 3 POINT EK4.. These small motors can be fitted directly
Type 231 ACTUATOR FOR DAMPERS. G R U N E R t h e. f r i e n d l y a l t e r n a t i v e. Actuator with rotation drive. 20 Nm 30 Nm
ACTUATOR FOR DAMPERS Type 231 Actuator with rotation drive 2 Nm Nm For the application with Room ventilation techniques VAV Valves Page: Content: 2 3 4-9 1-16 17 18-19 2 General overview Summary 231, 2