35 AND 39 LOW TEMP GLASS FRONT MERCHANDISER ILLUSTRATED PARTS MANUAL LOO76, REV. J

Transcription

1 35 AND 39 LOW TEMP GLASS FRONT MERCHANDISER ILLUSTRATED PARTS MANUAL LOO76, REV. J AUTOMATED MERCHANDISING SYSTEMS INC 255 WEST BURR BLVD. KEARNEYSVILLE, WV Fax info@amsvendors.com INTERNATIONAL A.M.S. S DE RL DE CV KM. 9 CARR. AL CASTILLO NO MPIO. DE EL SALTO, JAL. MEXICO Fax servicio@amsint.com.mx

2 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 2

3 AMS Glass Front Merchandiser 35 & 39 LOW TEMP Illustrated Parts Manual Table of Contents SECTION PAGE INTRODUCTION Table of Contents 3 General Introduction 4 Manual Organization 4 Merchandiser Identification 5 Patent Disclosure 6 Publication Notice 6 CABINET CHILLER DOOR Cabinet Components and Screens 8 Cabinet and Parts for VCB and VCF Vendor 10 Chiller Parts Side View 14 Chiller Parts Top View 16 Door, Coin Bay 18 Door, Hinges, Lighting and Glass 20 Door, External Parts 24 Door, Hopper with Sensit III 28 POS Display 30 ELECTRICAL HARNESSES 32 TRAYS Automated Merchandising Systems Inc (304) / FAX Helix Tray 54 Bottle Tray 56 Snack, Candy, Food Tray 58 Scrolling Price Tray 60 Helix 62 AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 3

4 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 4 GENERAL INTRODUCTION The purpose of this manual is to give our customers a way of identifying major service parts for repair and replacement. The illustrations and parts list in this manual are for identification of these service parts only. Illustrations of these major parts are keyed with our part numbers. The illustrations help identify the general design, position and orientation of these parts. The note section may also give important information. Please refer to the section on merchandiser identification on the following pages. Without the model style and serial number it may be difficult to identify the required part. Parts should be ordered from your distributor. It is our intent to assist our customers with up-to-date documentation. However, this manual may not show all parts, variations or changes. Some parts may be shown slightly out of scale. This manual is itself subject to change without notice. If any errors are found, please notify AMS so the correction can be included in later revisions. Engineering data and third party information are generally not included. The graphical data, group assembly data, parts, part assembly, parts breakout information and tabular data conveyed by this manual is proprietary and belongs to AMS, and holders without prior consent of or without knowledge of and by AMS must surrender this data immediately. All measurements are in inches except where specified as Metric. MANUAL ORGANIZATION This manual is divided into sections representing the general parts of our merchandisers. Each section is further divided into the various subsections or subassemblies of the machine. Each subsection leads off with one or more illustrations showing the parts. Each part shown is identified with the part number. After the illustrations, the part number in the illustration is paired with our drawing description or title for that part. In some instances there may be multiple parts to choose from. However, the correct service or repair part for the style of merchandiser must be selected. There is a note section where additional information may be found. A quantities column in the list provides information on the total quantities required for each set-up as shown. Some assemblies are fabricated as a unit at AMS and are replaceable only as a complete assembly. Optional parts identify parts contracted for and installed in the factory at AMS. This manual contains model and style information for a vendor as found in previous revisions or parent manuals, including corrections. It may also contain additional and new information, especially if it is specific to your new vendor. Previous revisions of this manual should be kept for use with the vendor it was issued for.

5 MERCHANDISER IDENTIFICATION When requesting service, replacement parts or technical assistance, please use the Model Number and the Serial Number with Date Code, found on the Serial Plate (Refer to Figure 1) affixed to the merchandiser. The plate is usually located inside the door, visible through the window. The information contained on this plate is necessary to determine what parts, kits, or maintenance apply to your vendor. Figure 1. Example of Typical Serial Plate Example of Model Number Breakdown AMS 39 VCB Example of Serial Number and Date Code Breakdown Manufacturer Cabinet Width Model Example: AMS39-VCB means this vendor is an Automated Merchandising Systems merchandiser, 39 wide, without Health and Safety protection. Built Year Month Sequence Example: is translated as U.S. built (1), manufactured in 2009, month of February, and was the 275 th manufactured that year. Note: Manufactured in Mexico, Built = (2) Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 5

6 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 6 PATENT DISCLOSURE This merchandiser and/or certain of its components are covered by one or more of the following U.S. and international patents; U.S. PATENTS: 6,041,962; 6,145,699; 6,202,888; 6,384,402; 6,520,373; 6,708,079; 6,794,634; 7,191,915; 7,343,220; 7,446,302; 7,742,837, 8,003,931. CANADIAN PATENT 2,329,314. MEXICO PATENT L0076, Revision H, 12/23/13 PUBLICATION NOTICE It is our intent to assist our customers with up-to-date documentation: however, this manual may not contain all updates and is subject to revision without notice. Please contact our Service Department with your requests or comments.

7 THIS PAGE INTENTIONALLY LEFT BLANK Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 7

8 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 8 CABINET COMPONENTS AND SCREENS ILLUSTRATION

9 CABINET COMPONENTS AND SCREENS PARTS LIST ITEM PART NO. PART DESCRIPTION NOTES POWER CORD COVER ROLLER BRACKET LEVELING LEG ROLLER REAR & BOTTOM TRIM CHILLER HOLE SCREEN, REAR CHILLER HOLE, 4 MESH IEC INLET COVER FRONT LEG ASSEMBLY LEFT FRONT LEG ASSEMBLY REAR LEG ASSEMBLY (QTY 2) ROLLER SHAFT SHIPPING BOARD 40 LONG, NOT TREATED, (DOM) SHIPPING BOARD 38-3/8 LONG, NOT TREATED, (DOM) SHIPPING BOARD 40 LONG, TREATED (ISPM 15), (EXPORT) SHIPPING BOARD 38-3/8 LONG, TREATED (ISPM 15), (EXPORT) SCREEN, BOTTOM CHILLER HOLE, 4 MESH (35 ) SCREEN, BOTTOM INSECT (35 ) Contact AMS for your application CONDENSER SCREEN ASSEMBLY (39 ) REAR & BOTTOM TRIM CHILLER HOLE (39 ) BOTTOM TRIM CHILLER HOLE (35 ) BOTTOM TRIM CHILLER W/ REMOVABLE SCREEN (39 ) CONDENSER SCREEN HOLDER ASSEMBLY (39 ) Contact AMS for your application SHEET METAL SCREW (1/4 HEX) IEC INLET STRAIN RELIEF /16 PUSH NUT POWER ENTRY MODULE, 230V EUROPE ONLY PLATE, POWER ENTRY MODULE, CE EUROPE ONLY Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 9

10 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 10 CABINET PARTS FOR 35 AND 39 LOW TEMP ILLUSTRATION A DETAIL A 13

11 CABINET PARTS FOR 35 AND 39 LOW TEMP PARTS LIST ITEM PART NO. PART DESCRIPTION NOTES LOCK, FLANGE LOCK, CAGE FLANGE, RIGHT VERTICAL COVER PLATE, HINGE HOLE LEFT VERTICAL RAIL EXTENSION BULKHEAD ASSEMBLY, VISI-COMBO (35 ) BULKHEAD ASSEMBLY, VISI-COMBO (39 ) ASSY., BULKHEAD, MU TRANSFORMER COVER PLATE COVER PLATE BULKHEAD, RIGHT RAIL MOUNT (35 ) BULKHEAD, RIGHT RAIL MOUNT (39 ) STIFFENER DOOR SWITCH PLATE WARNING DECAL RIGHT RAIL MOUNT, VERTICAL (35 ) RIGHT RAIL MOUNT, VERTICAL (39 ) SWITCH AND FUSE HOLDER PLATE FUSE DECAL LEFT VERTICAL RAIL MOUNT FAN SWITCH ENCLOSURE RAIL MOUNT DOOR ASSEMBLY TRAY POSITION DECAL OPTIONAL, CONTACT AMS FOR YOUR APPLICATION CABINET ASSEMBLY(35 ) CABINET ASSEMBLY(39 ) CONTACT AMS FOR YOUR APPLICATION SHEET METAL SCREW (1/4 HEX) /8 RIVET (1/8 GRIP) /8 RIVET (1/4 ) GRIP SQUARE MACHINE NUT SHEET METAL SCREWS (3/8 HEX) CABLE CLAMP RFI FILTER 115V NON-EUROPE ONLY, CHECK UNIT VOLTAGE Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 11

12 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J FUSE HOLDER ROCKER SWITCH N/O GROMMET EXTENSION SPRING NOT SHOWN TRANSFORMER 120V 2 USED 3258 TRANSFORMER 220V 2 USED CHECK UNIT VOLTAGE RELAY ROCKER SWITCH CABLE ASSEMBLY, DOOR STOP NOT SHOWN

13 THIS PAGE INTENTIONALLY LEFT BLANK Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 13

14 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 14 CHILLER PARTS ILLUSTRATION SIDE VIEW

15 CHILLER SIDE VIEW PARTS LIST ITEM PART NO. PART DESCRIPTION NOTES SHEET METAL SCREW TEK # SCREWS, ¼ X ¾, SELF TAPPING, HEX HEAD FOR ATTACHING TO TANK WALLS SCREWS, ¼ X 1, SELF TAPPING, HEX HEAD FOR ATTACHING TO TANK FLOOR EVAPORATOR FAN/MOTOR ASSEMBLY, 220V, 50Hz, 1 PHASE (VCB/VCF MODELS) EVAPORATOR FAN/MOTOR ASSEMBLY, 115V, 60Hz, 1 PHASE (VCB/VCF MODELS) NOTE VOLTAGE 3819 EVAPORATOR FAN/MOTOR ASSEMBLY, (LB/LC MODELS), 115V, 50/60 Hz EVAPORATOR COVER PLATE EVAPORATOR PLENUM EVAPORATOR PLENUM (VISI-COMBO) CONTACT AMS FOR YOUR APPLICATION ASSEMBLY, 1/2, CHILLER, 115V ASSEMBLY, 1/2, CHILLER, 240V ASSEMBLY, MODULAR UNIT, 115V (LB/LC MODELS) ASSEMBLY, CHILLER HOUSING (35 ) Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS SEE NOTE. CONTACT AMS FOR YOUR APPLICATION HOUSING MUST SEAL AGAINST CABINET AS SHOWN ASSEMBLY, CHILLER HOUSING, ENGLISH (39 ) ASSEMBLY, CHILLER HOUSING, SPANISH (39 ) 9 ASSEMBLY, TOP BULKHEAD, CHILLER COVER, LB/LC, HOUSING MUST SEAL AGAINST CABINET AS SHOWN. SUPPLIED WITH ACCESS DOOR ASSEMBLY, TOP BULKHEAD, CHILLER COVER, LB/LC, BRACKET, TEMPERATURE SENSOR CABINET ASSEMBLY(35 ) CABINET ASSEMBLY(39 ) CONTACT AMS FOR YOUR APPLICATION BASE, STAMPED EVAPORATOR DRAIN PAN FOR STAMPED PAN ASSEMBLIES ASSEMBLY, STAMPED EVAPORATOR DRAIN PAN USE WITH 21990, DRAIN PAN BASE NOTE: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system, creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty. 15

16 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 16 CHILLER PARTS ILLUSTRATION TOP VIEW

17 CHILLER PARTS LIST TOP VIEW ITEM PART NO. PART DESCRIPTION NOTES 3065 FAN, CONDENSER ASSEMBLY, 220V, 50 Hz, 1 PHASE 3108 FAN, CONDENSER ASSEMBLY, 115V, 60Hz, 1 PHASE 1 NOTE VOLTAGE EVAPORATOR FAN/MOTOR ASSEMBLY, (LB/LC 3819 MODELS), 115V, 50/60 Hz SPONGE (CONDENSER DRAIN PAN) SPONGE (BLUE) LB/LC MODELS REFRIGERATION HARNESS (VCB/VCF MODELS) REFRIGERATION HARNESS, LB/LC MODELS USE WITH BOTH 115V OR 220V SYSTEMS ASSEMBLY, 1/2, CHILLER, 115V (VCB/VCF MODELS) SEE NOTE. CONTACT AMS FOR YOUR ASSEMBLY, 1/2, CHILLER, 240V (VCB/VCF MODELS) APPLICATION ASSEMBLY, MODULAR CHILLER, 115V (LB/LC MODELS) BASE, STAMPED EVAPORATOR DRAIN PAN (VCB/VCF MODELS) FOR STAMPED PAN ASSEMBLIES ASSEMBLY, STAMPED EVAPORATOR DRAIN PAN USE WITH 21990, DRAIN PAN BASE 6 ASSEMBLY, MOLDED EVAPORATOR DRAIN PAN (LB/LC MODELS) CONDENSER DRAIN PAN (VCB/VCF MODELS) CONDENSER DRAIN PAN (LB/LC MODELS) NOTE: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system, creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty. Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 17

18 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 18 COIN BAY DOOR ILLUSTRATION

19 COIN BAY DOOR PARTS LIST ITEM PART NO. PART DESCRIPTION NOTE Screw, Sheet Metal TEK Carriage Bolt, #10-24,1/2" Nut, Hex, Machine Screw, # per DBV Opening Nut, Hex, Machine Screw, # Rivet, Steel, 1/8", Black, Grip Length 1/4" Washer, Flat Steel, SAE Std., # Washer, Flat Steel, SAE Std., # PC Board Support (3/16") For Control Board Rivet, Nylon, Trim Hold Door Closed Scavenger Button, Blk Assy., Coin Chute, Upper Scavenger Guide, Epoch Assembly, Plastic Coin Cup Coin Box Bulkhead DBV Cover Plate Flat Steel Plate, 1 per DBV Opening Assembly, Coin Chute, Lower Bracket, Pushbutton Alignment, Epoch Assembly, Coin Box Door Stiffener, Upper, Without Fuse And Switch 19 Door Stiffener, Upper, Locking, W/O Fuse And Not Shown Switch Door Stiffener, Bottom with Switch Assembly, Upper Coin Door, Low Temp Control Board, Sensit Mounting Panel, Changer, Multi-Use Assembly, Display, VER 3, Escutcheon, Sensit II Assembly, Scavenger System Escutcheon, VER Assy., Foamed Door, L/T, Epoch (35 ) Assy., Foamed Door, L/T, Epoch (39 ) Contact AMS for your application Assy., Foamed Door, L/T, Epoch-ADA (39 ) Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 19

20 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 20 DOOR HINGES, LIGHTING AND GLASS ILLUSTRATION

21 DOOR HINGES, LIGHTING AND GLASS PARTS LIST ITEM PART NO. PART DESCRIPTION NOTE Screw, TEK Carriage Bolt, ¼-20, ¾ Rivet, Pop, Steel, 1/8 Diameter Screw, ¼ X ¾, Self Tapping, Hex Head For Glass Retainers Starter, FS2 For Single Fluorescent Lamp, 110V 3163 Starter, S10 For Single Fluorescent Lamp, 230V, 50 Hz Screw, Machine, #4-36 (3/4 Long) For Single Fluorescent Lamp, 110V Fluorescent Lamp, 18, 1 Diameter For Single Fluorescent Lamp, 110V Lamp, LED, 24 For Single LED Option Nut, Hex With Lock Washer Lamp, LED, 42 For Dual LED Option Lamp, LED, 35 For Dual LED Option in 39 Epoch ADA Lamp, LED, 24 For Dual LED Option Cable Clamp, Black Nylon (1 Dia.) For Dual LED Option Screw, Sheet Metal, Tek 8-18, Clear Zinc, ½ L For Dual LED Option Lamp Cover, T8, 18, Clear, With End Caps For Single Lamp Option Retainer, Vertical Eyelet Hinge, Washer Plate Retainer, 1" Dual Pane Glass, Bottom Deflector (39") Retainer, 1" Dual Pane Glass, Bottom Deflector (35") Assembly, Top Hinge, 3/ Assembly, Bottom Hinge Bottom, 3/ Extrusion, Glass Installation, Ver. 2, (35 ) Extrusion, Glass Installation, Ver. 2, (39 ) Extrusion, Glass Installation, Ver. 2, (35 ) Extrusion, Glass Installation, Ver. 2, (39 ) 20 Extrusion, Glass Installation, Ver. 2, (Epoch-ADA 39 ) Retainer, Horizontal Eyelet Horizontal, Use with Glass Vertical, Use with Glass Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 21

22 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J Assembly, Lamp Bracket, Single (35 ) For Single Fluorescent Lamp, 110V Lamp Mtg. Bracket, Universal (39 ) For Single Fluorescent Lamp, 110V and 230V Assembly, Lock Bolt Cover, L/T Assembly, Lock Bolt Cover, L/T 39 ADA Lock Bolt Bracket T-Handle Seal Tray Restraint, Low Temp, Reduced Depth Tray Restraint, Low Temp, Reduced Depth ADA Sheet Metal Screw (1/4 Hex x ½ ) Glass Retainer Corner WINDOW, GLASS, 1 DUAL PANE (39 ) WINDOW, GLASS, 1 DUAL PANE (35 ) WINDOW, GLASS, 1 DUAL PANE L/T (39 ), EPOCH-ADA VERTICAL GLASS RETAINER(39 ) VERTICAL GLASS RETAINER, EPOCH-ADA (39 ) VERTICAL GLASS RETAINER, (35 ) TOP GLASS RETAINER, (39 ) TOP GLASS RETAINER, (35 ) CORNER, WINDOW TRIM

23 THIS PAGE INTENTIONALLY LEFT BLANK Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 23

24 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 24 TRIM OPTION WINDOW COVER WITH TRIM OPTION DOOR, EXTERNAL PARTS ILLUSTRATION

25 ITEM DOOR, EXTERNAL PARTS LIST PART NO. PART DESCRIPTION NOTE Screw, Sheet metal, TEK 8-18 For Securing Trim Rivet, Aluminum, ¼ Diameter, Natural (1/4 Grip) For Securing Window Covers Window Cover, Polycarbonate (35 ), Window Cover, Polycarbonate (39 ), Contact AMS for your application Trim, Plastic Insert, For Recessed Base (31.93 ) (35 ) Trim, Plastic Insert, For Recessed Base (37.25 ) (39 ) Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (65.38 ) Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (30.2 ) Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (29.4 ) Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (23.9 ) (35 ) Trim, Plastic Insert, For Recessed Base (29.68 ) (39 ) Snaps into Trim Base Recessed Trim Base With Holes, Painted (35 ) Recessed Trim Base With Holes, Painted (39 ) Black Paint Finish Recessed Trim Base With Holes, Painted Black Paint Finish Recessed Trim Base With Holes, Painted Black Paint Finish Recessed Trim Base With Holes, Painted Black Paint Finish Recessed Trim Base With Holes, Painted (35 ) Recessed Trim Base With Holes, Painted (39 ) Black Paint Finish Trim, Vend Eyelet Assy., Foamed Door, L/T, Epoch (35 ) Assy., Foamed Door, L/T, Epoch (39 ) Contact AMS for your application Assy., Foamed Door, L/T, Epoch-ADA (39 ) Trim, Plastic Coin Cup Carriage Bolt T-Handle Assembly Lock Cylinder Lens, Escutcheon, GFM Button,.090 Dia. Round, Escutcheon DBV Cover Panel, Gray Optional Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 25

26 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J Escutcheon, Plastic, Epoch Led Driver, Keypad Escutcheon/Keypad Assy Membrane Switch Mounting Plate, 4/76 x Assembly, Lighted Keypad Includes Escutcheon, Lighted Keypad & Buttons and Display Lens

27 THIS PAGE INTENTIONALLY LEFT BLANK Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 27

28 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 28 DOOR, PRODUCT HOPPER ILLUSTRATION

29 DOOR, PRODUCT HOPPER PARTS LIST ITEM PART NO. PART DESCRIPTION NOTE ASSY., PRODUCT SENSOR EMITTER OPTIONAL ITEM ASSY., PRODUCT SENSOR DETECTOR OPTIONAL ITEM LEFT PRODUCT KICKER W/O FLANGE OPTIONAL ITEM RIGHT PRODUCT KICKER W/O FLANGE OPTIONAL ITEM DEFLECTOR PLATE, 1.5 HELIX TRAY RH (39 ONLY) DEFLECTOR PLATE, 1.5 HELIX TRAY LH (39 ONLY) REQUIRED WITH 1.5 HELIX TRAY (39 ) CLEANING DECAL DOOR SWITCH ENCLOSURE FAN STRIKER PLATE LENS, PRODUCT SENSOR REQUIRED WITH ITEMS 1& PRIMARY SENSOR BRACKET SECONDARY SENSOR BRACKET SECONDARY SENSOR COVER PRIMARY SENSOR COVER HOPPER ASSEMBLY (35 ) HOPPER ASSEMBLY (39 ) VEND DOOR ASSEMBLY (35 ) VEND DOOR ASSEMBLY (39 ) DEFLECTOR PLATE, 2.71 Height, 1-1/8 CU Ft. Hopper (35 ) DEFLECTOR PLATE, 2.71 Height, 1.5 CU Ft. Hopper (39 ) OPTION* DEFLECTOR PLATE, 2.25 Height, 1-1/8 CU Ft. Hopper (35 ) DEFLECTOR PLATE, 2.25 Height, 1.5 CU Ft. Hopper (39 ) OPTION* PRIMARY SENSOR BOARD SECONDARY SENSOR BOARD SHEET METAL SCREW (1/4 HEX) SHEET METAL SCREW (1/4 HEX, BLUNT TIP) /8 X ¼ GRIP STEEL RIVET ROCKER SWITCH WIRE TIE, PANEL MOUNT GROMMET SHEET METAL SCREW (3/8 HEX) *Use 1 of these if there is no 1.5 Helix Tray. Choose height based on lowest tray position. Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 29

30 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 30 POS DISPLAY ILLUSTRATION

31 POS DISPLAY PARTS LIST ITEM PART NO. PART DESCRIPTION NOTE POS DISPLAY INSERT POS DISPLAY DIFFUSER LED BOARD POS DISPLAY CARD (AMS) ENGLISH POS DISPLAY CARD (IAMS) SPANISH LIGHT BOX ASSEMBLY BUSHING Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 31

32 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 32 ELECTRICAL HARNESS ILLUSTRATIONS

33 Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 33

34 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 34

35 Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 35

36 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 36

37 Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 37

38 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 38

39 Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 39

40 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 40

41 Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 41

42 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 42

43 Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 43

44 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 44

45 BLACK WIRE WHITE WIRE BLACK WIRE WHITE WIRE Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 45

46 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 46

47 Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 47

48 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 48 ELECTRICAL HARNESS PARTS LIST PART NO. PART DESCRIPTION NOTES POWER CORD ASSEMBLY, 115V U.S. & CANADA 3173 POWER CORD, AUSTRALIA 3194 POWER CORD, U.K. & IRELAND 3208 POWER CORD, INDIA & SOUTH AFRICA REFRIGERATION HARNESS DOOR MOTORS HARNESS COLUMN TRAY HARNESS MOTOR DISTRIBUTION HARNESS RFI FILTER GROUND MULT-DROP BUSS HARNESS BALLAST ASSEMBLY OPTIONAL LIGHTING ITEM EVAPORATOR FAN HARNESS TRANSFORMER AND FUSE HARNESS DUAL TRANSFORMER HARNESS WINDOW HEATER TRANSFORMER HARNESS NOT ON LB5/LC5 MODELS REFRIGERATION RELAY HARNESS

49 21425 DELIVERY SENSOR HARNESS DELIVERY SENSOR DETECTOR/EMITTER HARNESS PRODUCT SENSOR EMITTER HARNESS PRODUCT SENSOR DETECTOR OPTIONAL ITEM HARNESS, GROUNG, EMITTER/DETECTOR DISPLAY HARNESS TEMPERATURE SENSOR POWER DISTRIBUTION HARNESS VCB/VCF MODELS ON/OFF SWITCH HARNESS HELIX TRAY HARNESS CONTROL POWER AND REFRIGERATION HARNESS WINDOW HEATER HARNESS NOT ON LB5/LC5 MODELS GROUND HARNESS CONDENSER FAN HARNESS (LB/LC MODELS) DUAL TRANSFORMER, NO BALLAST HARNESS EVAPORATOR FAN HARNESS (LB/LC MODELS) HARNESS, LB/LC COMPRESSOR RELAY, CAPACITOR HARNESS REFRIGERATION HARNESS (LB/LC MODELS) POWER DISTRIBUTION HARNESS (LB/LC MODELS) LIGHTED POS POWER HARNESS Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 49

50 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J HELIX TRAY ILLUSTRATION

51 1.5 HELIX TRAY ASSEMBLY PARTS LIST ITEM NO PART NO. PART NAME QTY NOTES Screw, TEK Rivet, Pop, Steel, 1/ Latch, Nylon, Gum and Mint Strike, Nylon, Gum and Mint Motor, w/home Circuit Extrusion, Gum and Mint Rail Extrusion Mount, Upper (Gum and Mint)(Right Side) Extrusion Mount, Upper (Gum and Mint)(Left Side) Extrusion Mount, Lower (Gum and Mint)(Right Side) Extrusion Mount, Lower (Gum and Mint)(Left Side) Extrusion, Price Marker, Reduced Height Rail, Gum and Mint, Reduced Depth (39 )(Right Side) Rail, Gum and Mint, Reduced Depth (39 )(Left Side) 1 Rails To Fit Tray To 39 Cabinet Doubler, Tray 1.5 Helix Tray Tray Body, 1.5 Helix Tray Tray Back, 1.5 Helix Tray Tray Inner Side, 1.5 Helix Tray 2 Parts Are Factory Assembled As A Unit Tray Inner Section, 1.5 Helix Tray Tray Inner Mid Section, 1.5 Helix Tray Divider, Tray, 1.5 Helix Tray, RH Divider, Tray, 1.5 Helix Tray, LH Tray Slide Channel,1.5 Helix Tray, RH Tray Slide Channel,1.5 Helix Tray, LH Helix Adapter, 1.5 Helix Tray Helix, 1.5 Tray, Counterclockwise, Black Helix, 1.5 Tray, Counterclockwise, Black 2 Tray is Equipped With Two Of Each Bracket, Stop, 1.5 Helix Tray Harness, 1.5 Helix Tray Deflector Plate, 1.5 Helix Tray, 1-1/2 CF. Hopper (39 ) 1 RH, Mount On Hopper For 1.5 Tray Only Deflector Plate, 1.5 Helix Tray, 1-1/2 CF. Hopper (39 ) 1 LH, Mount On Hopper For 1.5 Tray Only General Note: The 1.5 Helix Tray has replaced the Gum and Mint Tray. Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 51

52 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 52 BOTTLE TRAY ILLUSTRATION

53 BOTTLE TRAY PARTS LIST ITEM PART NO PART DESCRIPTION NOTE Screw, Sheet Metal, Type B, Rivet, Pop, Steel, 1/ Bearing, Nyliner, Snap-In Use On And for Bottle Tipper Washer, Flat Steel Protective Cap, Vinyl Obsolete Part Wire Tie, Panel Mount Helix Ejector, Small Helix Tape, UHMW Polyethylene, 3/4 X Motor, Single Helix W/O Switch Harness, Tray, 8 Column Extrusion, Price Marker, Ver Tray Doubler, Bottle (39 ) Tray Corner, Bottle, Right Use With Without Bottle Tipper Assembly, Bottle Tipper Bar Tray Corner, Bottle Tipper Bar, Right Use With For Bottle Tipper Device, Bottle Alignment Tray Corner, Bottle Tipper Bar, Left Use With For Bottle Tipper Tray Corner, Bottle, Left Use With Without Bottle Tipper Tray Reinforcement, Bottle (39 ) Ver Edge Guard, Tray Corner (Only RH) Use On Without Bottle Tipper Edge Guard, Tray Corner (Only RH) Use On For Bottle Tipper Tray Divider, Reduced Depth (Square Front) 3.37 High (Optional Part) Tray Body, Bottle, Reduced Depth (39 ') Rail, Bottle Tray, Reduced Depth (RH) Rail, Bottle Tray, Reduced Depth (LH) Bracket, Bottle Tray Rail, Reduced Depth (RH) Bracket, Bottle Tray Rail, Reduced Depth (LH) Helix Adapter, Without Hub Tray Divider, Reduced Depth, Tapered Front 3.37 High Helix, 3 Counter-Clockwise See Helix Description Section For Options Tray Divider, Reduced Depth, Tapered Front, High 4.9 High (Optional Part) Rail Slide, Full Extension, 24 1 Pair Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 53

54 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 54 SNACK/CANDY/FOOD TRAY ILLUSTRATION

55 SNACK/CANDY/FOOD TRAY PARTS LIST ITEM NO PART NO. PART DESCRIPTION NOTE Helix 1 Per Column - See Helix Section Screw, Sheet Metal, 8-18 Safety Screws for Rails Screw, Sheet Metal, Type B, #8-18 (3/8" Long) Rivet, Pop, Steel, 1/8 (1/8" Grip) Canoe Clip 2 Per Helix Alignment Device Wire Tie, Standoff Divider Cap Obsolete Part Wire Tie, Panel Mount Helix Ejector Rivet, Steel, 1/8, Plated Use for Tray Stop Tray Stop (Rh) Tray Stop (Lh) Motor, With Home Circuit CCW Motor, With Home Circuit CW Tray Divider Spring Per Divider Harness, Tray, 10 Column Extrusion, Candy Pusher Per Divider With Cut-outs Bar, Candy Pusher Per Divider With Cut-outs Extrusion, Price Marker, Reduced Height Tray Doubler, VER 2 (39 ) Tray Corner, Ver. 2 (Rh) Tray Corner, Ver. 2 (Lh) Label Sheet, Reduced Height Location Label Sheet, Reduced Height Price Edge Trim, Tray Corner Right Hand Corner Only Tray Body, Reduced Depth (39 ) Tray Body, Reduced Depth (35 ) Helix Adapter, Without Hub Helix Alignment Device, PVC Assembly, Rail, Snack, Right Assembly, Rail, Snack, Left Tray Divider, VER 2, 3-3/8 High Select Type, Numbers To Form Columns Tray Divider, VER 2, 4-7/8 Select Type, Numbers To Form Columns Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 55

56 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 56 SCROLLING PRICE TRAY ILLUSTRATION

57 SCROLLING PRICE TRAY PARTS LIST ITEM PART NO. PART DESCRIPTION NOTE TRAY STOP TRAY STOP LEFT MOTOR, COUNTER CLOCKWISE MOTOR, CLOCKWISE OPTIONAL HELIX SEE HELIX TABLE HARNESS, TRAY 10 COLUMN EXTRUSION, CANDY PUSHER OPTIONAL BAR, CANDY PUSHER OPTIONAL TRAY CORNER, RH TRAY CORNER, LH EDGE TRIM, TRAY CORNER RIGHT HAND SIDE ONLY TRAY BODY (39 ) TRAY BODY (35 ) HELIX ADAPTOR DIVIDER, STANDARD, 3 3/8 High DIVIDER, HIGH, 4 7/8 High OPTIONAL DIVIDER, EXTRA HIGH, 8 High OPTIONAL HELIX ALIGNMENT DEVICE OPTIONAL SCROLL, PRICE LABEL, SCROLL, PRICE LABEL, TRAY STIFFENER TRAY STIFFENER COVER GUIDE SELECT COVER SELECT COVER, NO WINDOWS OPTIONAL, FOR DUAL HELIX SELECTION SCREW RIVET CANOE CLIP WIRE TIE STANDOFF WIRE TIE, PANEL MOUNT HELIX EJECTOR RIVET LOCATION LABEL Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 57

58 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 58 HELIX ILLUSTRATIONS

59 PART NO. HELIX DESCRIPTION * SLOT WIDTH HELIX PARTS LIST NUMBER OF SLOTS (PITCH) HELIX OUTSIDE DIAMETER TURNS Helix, Small CW, Black 2 5/ CW Use With As A Set Helix, Small CCW, Black 2 5/ CCW Helix, Small CW, Black 1 7/ CW Use With As A Set Helix, Small CCW, Black 1 7/ CCW Helix, Small CCW, Black 1 7/ CCW Helix, Small CCW, Black 1 7/ CCW Helix, Small CCW, Black 1 7/ CCW Helix, Small CCW, Black 1 7/ CCW Helix, 1.5, CCW, Black CCW Use in 1.5 Helix Tray Helix, 1.5, CCW, Black 9/ CCW Use in 1.5 Helix Tray Helix, 3, CCW, Black CCW Bottle Tray Helix, 3, CCW, Black CCW Bottle Tray Helix, 3.75 CCW, Black 3 ¼ CCW Large Helix, 3.75 CCW, Black 2 5/ CCW Large Helix, 3.75 CCW, Black CCW Large Helix, 3.75 CCW, Black 1 ¾ CCW Large Helix, 3.75 CCW, Black 1 ½ CCW Large Helix, 3.75 CCW, Black 1 ¼ CCW Large General Note: Please call AMS if a helix with a special pitch is required. Also, the quantity of helixes required depends on the vendor configuration. NOTE Automated Merchandising Systems Inc (304) / FAX AMS MODELS 35 and 39 LOW TEMP MERCHANDISERS 59

60 AMS Glass Front Merchandiser, 35 and 39 Low Temp Illustrated Parts Manual, L0076, REV. J 60