New Holland & 8670A A Buhler Genesis 2145/2160/2180/2210

Size: px
Start display at page:

Download "New Holland & 8670A A Buhler Genesis 2145/2160/2180/2210"

Transcription

1 New Holland A - 90A Buhler Genesis 1/10/10/ Tractors MANUAL 191

2

3 New Holland A - 90A Buhler Genesis 1/10/10/ Tractors Blade, pivot frame 1 Hydraulics Tractor fit-up, mounting Operation, maintenance 9 Attachments Safety, warranty 1 Industrial Drive, Box 0 Regina, Sask. Canada SP B fx degelman@degelman.com SAFETY The safety instructions that follow pertain only to this specific equipment. You should be aware of agricultural industrial safety especially related to heavy equipment. If you are not familiar with safety procedures then you should get training. Improper use will result in maiming or death. 191

4 Buhler Genesis p1

5 191 Qty 1 0 1ft / Dlock blade ft 1 00 ft ft 1 01 Angling cap 1 9 Bolt / x 1/ Gr Lock nut / GrC 1 Relief valve brkt Depth shoe 0 Pin / x 1/ 901 Lynch pin /1 x 1 1/ 9 0 ft Cutting edge, 1ft bld 0 ft, 1ft bld ft, ft bld ft, ft bld 1 0 Plow bolt / x 1/ as Lock nut / unitorq required Pivot frame Wear bushing 1 p

6 Buhler Genesis 1- Hydraulics 11, 1/ x x 1 1/ Lift cylinder Barrel 1 1 Lock ring 1 1 Open cap 1 1 Lock nut / unf unitq 1 1 Piston 1 10 Rod clevis 1 90 Clevis pin 9 Shld bolt 1/ x 1 1/ 9 9 Flat washer.91 1 Seal kit 000 Lift hydraulic kit 9 19, x 1 x 1 1/ Angle cylinder Barrel 1 1 Lock ring 1 1 Open cap Lock nut / unf unitq 1 1 Piston Rod clevis 1 90 Clevis pin 9 Shld bolt 1/ x 1 1/ 9 9 Flat washer.91 1 Seal kit 00 Angle hydraulic kit 9 p

7 1 Relief valve 1 Bolt /1 x 1/ Qty () (0) Relief (0) () Flat washer /1 0 Lock washer /1 (1) (1) Nut /1 Angle Lift (9) (9) Lift Angle 1 (1) (1) Install behind brkt (0) (0) (1) continued (1) continued (0) hose length in inches 1 Hose / x (9) 11 Hose / x (1) EL / m JIC x ORB 1 01 TEE / m JIC 1 Connector / m JIC x ORB TEE / m JIC x JIC x ORB 1 Quick coupler 19 Hose / x (0) 1 Hose / x () mxf 1 Hose / x () 1 Hose / x (0) 1 Hose / x (1) Coloured hose markers, 1 pack () mxf () mxf Hose take-up Use different coloured tape to mark sets of hydraulic hoses. Use one or two tapes to indicate lifting or retracting hoses. () mxf () mxf 191 p

8 Fit up Buhler Genesis Buhler 191 Buhler Back of back bolt bar- Upper row of holes Buhler Front of back bolt bar All tractors Rear frame 1st nd rd th p Main frame th th th 1th

9 Existing NH nut used on back, Super steer (illustrated): Take weight brkt off axle install hardware shown Hook hose take up to tractor frame Tractor's hyd ports at rear Tractor axle Existing NH spacer used on front,,, 9 Back plate of front bracket Qty Main frame 1 00 Front hanger 1, Buhler 0 Front hanger 1 0 Bolt / x 1/ Lock nut /,,,, This front plate hardware is only used to install the NH weight brkt on regular steer tractors. Front view, looking back 1 1,,, Front brkt front plate; Top view top row of holes NH weight brkt Spacer () only needed if you're using weights 00 Front bracket 1 Bolt M0 x 0 1 Lock washer M0 99 Front brkt spacer 9 1 Bolt M0 x 0 9 Flat washer M0 0 Lock nut M0 1 Bolt M0 x RH side bracket 1 01 LH 1 1, Buler 0 RH side brkt 1 0 LH 1 Bolt M0 x 10 1 Flat washer M0 1 1 Lock nut M Rear frame 1 1 Bolt / x 1/ Lock washer / 1 1 Nut / 1 Grand total Regular steer: Take NH weight brkt off frame, no changes made to axle. NH weight brkt can be reinstalled on front brkt. Suitcase weights must removed to install front brkt. Weights must be removed when blade is mounted Pivot pin, main-pivot Bolt 1/ x 1/ Lock washer 1/ 1 0 Nut 1/ 1 Bolt 1 x 1 gr 0 Spacer washer 91 Bolt 1 x 1 91 Weight brkt spacer 00 Hose take up 1 0 Spring Wear bushing p

10 191 Buhler Genesis 1- Rear frame Dlock linkage c/w Wedge 1 1 Compression spring 1 01 DL linkage plate/bush 1 91 Roll pin 1 00 Bolt / x 0 DL bushing Lock nut / 9 00 Lock pin 09 UHMW plastic block 0 Hose clamp part c/w Bolt /1 x 1 1/ Top plate Clamp two halves Bottom plate weld on DL handle p

11 Mounting Buhler Genesis 1- Dlock closing Take clip pin off Use the handle to close the latch Line tractor up over the rear/main frames. Make sure Dlock is open, clip pin is put back on and handle is stored. Drive forward so that the front bracket pin is just behind the front hanger's hook. It should be lined up so you can drive into the front hanger when it is raised up. Hook up the hydraulics. Note the second position for the final movement of closing Raise the front hanger by extending the lift cylinders so the pin and hook are level. Secure with clip pin Put handle away Drive forward until the pin is in the front hanger. Now close the lift cylinders. This will raise up the rear frame. Take off clip, close the Dlock, attach clip then store the handle. There should be a /" gap Note: the clip pin holds the Dlock both open closed Make sure DLOCK is closed properly To disengage: 1- RAISE THE BLADE - Open the Dlock - Extend lift cylinder to lower rear frame - Lower main frame to ground - Back out to clear front hanger - Unhook hydraulics WARNING It is vital to raise the blade before opening Dlock. p If you don't the rear frame will fall. 191

12 Operation, maintenance TORQUE Buhler Genesis Before using for the first time Lube all points Torque all hardware to correct setting Check hardware torque hydraulics after the first hrs again after hrs Check steering stops tread width settings Before using each time Check: If all points lubricated All components attached securely Condition of cutting edge Depth shoe wear Hydraulics; Tractor s oil reservoir Condition of hoses, lines fittings Bleeding hyd Bleed hydraulics of air. Cycle the hydraulics several times and hold the cylinders at full extent for several seconds. Soft uneven ground Depth shoe low Blade high Depth shoes Rear end weights Tire inflation If needed balance out your tractor by ballasting the rear end. You may need to raise the tire pressure in the front wheels. Consult your tractor's manual. Floatation mode Here are some the things you can do with your hyd system in float position; Skim the top of pavement Run on the skid shoes Back drag Cold weather Cycle the cylinders several times to warm up system. Hard even ground Depth shoe high Blade low TORQUE SETTINGS Imperial Size Metric Size all hardware All hardware; Hex head, Plated, Gr. UNC (imperial) or P.9. (metric) Hoses; /, ends c/w / JIC female swivel Unless stated otherwise Grade 1/ 9 1 /1 1 / 0 / / 1 9/1 1 / 1 1 / 0 / SAE ft lb ft lb Hyd. fitting Size / ft lb p9 / 90

13 Record your serial number blade width 191 9,, 1 or 1ft? Lubrication All hardware; Hex head, Plated, Gr. UNC (imperial) or P.9 (metric) Hoses; /, ends c/w / JIC female swivel Unless stated otherwise? Metric thread specs M Thread pitch Buhler Genesis 1- Lube all points and mechanisms after every hr of use. Lube both sides Lube with: Grease Angle cap Front brkt, top Spray lubricant Lift cyl Lift cyl Front brkt, bottom Angle cyl Angle cyl Pivot pin, pivot/main frm Dlock p

14 Options Decals reflectors 1 Warning decal, Falling Blade 100 Degelman logo / lg 10 Red reflector / 19 Amber reflector 1/ lg 1 Buhler Genesis / blade decal Bracket only used for blades without integrated brackets Place washers on pin to fill gap Top extension 1ft 1 1 1ft 1 1 ft ft 1 0 Bolt / x 9 1 Flat washer / Nut / Flat washer 1 1/ Silage extension 1ft 1 1 1ft 1 ft 1 9ft 1 1 Bracket 0 Bolt / x 1/ 1 Flat washer / 1 09 Lock washer / Nut / 1 0 Extension 1ft 1 0 Bolt / x 1 09 Lock washer / 1 Nut / 1 01 Side plate 1 0 Bolt / x 1 09 Lock washer / 19 Nut / p

15 KILLED, INJURED OR SAFE? Safety YOUR CHOICE You are responsible for your own safety. If you are not familiar with basic agricultural industrial safety, you must get training. Owners of equipment must by law give operating instructions to other operators such as family members or a hired hand. Making any design changes to equipment could cause a hazard and damage your machine. Wear proper safety equipment. Have handy; First aid kit Fire extinguisher Before working on machine: Turn tractor off Set controls in neutral Remove ignition key Clean all reflectors and lights HYDRAULIC Keep all parts clean. Replace worn or damaged parts. Don t try any makeshift repairs. Before operating check that everything is tight and not broken. Wear gloves and eye protection when searching for leaks. Use a piece of wood or cardboard but not your hand. High pressure oil will penetrate your skin. If that happens you risk serious injury. BLADE Lower blade to the ground when not in use. Keep clear of blade when tractor is running. Keep hands feet away from under blade. Turn engine off when hooking up hydraulics and engaging DLOCK during mounting or dismounting. TRANSPORTING Lift blade up then hold with safety chain. Make sure SMV sign reflectors are clean. Use your hazard lights. 191 (090) WARRANTY Degelman Industries warrants this product to the original owner for a period of one (1) year parts and labour and two () years parts from the date of purchase. All matters related to the warranty of our products must be handled through the authorized selling dealer. Warranty does not cover normal wear of the machine components or damages caused by lack of maintenance or misuse, and is subject to the following provisions. REPLACEMENT PARTS: Will be warranted for a period of ninety (90) days. WARRANTY ON MACHINES USED FOR CUSTOM WORK, RENTALS OR INDUSTRIAL USE: Will be warranted as stated above, with the exception that it will be for a period of ninety (90) days only. TIRES: Will be adjusted for warranty by tire manufacturer. LABOUR: Any labour subject to warranty must be authorized by a Degelman representative before work is started. Warranty labour allowance and rates will be handled according to established warranty service policy. GOVERNMENT LEGISLATION: Warranty terms and conditions are subject to Provincial or State legislation. MODIFICATIONS: Warranty will be void if any component is altered or modified, unless written authorization is granted by Degelman Industries Limited. WARRANTY ON ATTACHED EQUIPMENT: No responsibility will be assumed for whatever damages may occur to persons, tractors or property. p1

Case IH MX Tractors MANUAL

Case IH MX Tractors MANUAL Case IH MX - 0 Tractors MANUAL Case IH MX - 0 Tractors Blade, pivot frame 1 Hydraulics Tractor fit-up, mounting Operation, maintenance Attachments 11 Safety, warranty 1 Industrial Drive, Box 0 Regina,

More information

New Holland TM CASE MXM

New Holland TM CASE MXM New Holland TM - 90 CASE MXM - 90 Tractors MANUAL New Holland TM - 90 CASE MXM - 90 Tractors Blade, pivot frame Hydraulics Tractor fit-up, mounting Operation, maintenance 9 Previous hydraulic system Attachments

More information

John Deere TLS TLS Tractors MANUAL

John Deere TLS TLS Tractors MANUAL John Deere 600-00 6-6 TLS - TLS Tractors MANUAL 00 John Deere 600-00 6-6 TLS - TLS Tractors Blade, pivot frame Hydraulics Tractor fit-up, mounting Operation, maintenance Previous hydraulic system Attachments

More information

Case STX/NH TJ

Case STX/NH TJ Case STX/NH TJ 0-0 Tractors MANUAL Case STX/NH TJ 0-0 Tractors Blades, pivot frames Tractor fit-up Dlock, mounting Hydraulics Operation, maintenance Safety, warranty Industrial Drive, Box 0 Regina, Sask.

More information

John Deere Tractors MANUAL

John Deere Tractors MANUAL John Deere 800-820 Tractors MANUAL 202 John Deere 800-820 Tractors Blade, pivot frame Cylinders & Hydraulics Main Frame, Brackets, Mounting Safety, Operation, Maintenance 9 Attachments Warranty 2 22 Industrial

More information

New Holland TG S.S.

New Holland TG S.S. Mid-Mount New Holland TG210-285 S.S. Tractors MANUAL Mid-Mount New Holland TG210-285 S.S. Tractors Blade, pivot frame 1 Cylinders & Hydraulics 3 Main Frame, Brackets, Mounting 5 Safety, Operation, Maintenance

More information

SAFETY. Hitchpole, centre frame 1. Centre frame wheels & roller 3. Centre & wing frames 5. Wing frame wheels & roller 9.

SAFETY. Hitchpole, centre frame 1. Centre frame wheels & roller 3. Centre & wing frames 5. Wing frame wheels & roller 9. MANUAL Hitchpole, centre frame 1 Centre frame wheels & roller 3 Centre & wing frames Wing frame wheels & roller 9 Hydraulics 11 Clearance lights 13 Operations 1 Safety, warranty 1 SAFETY Industrial Drive,

More information

SAFETY. Trailer, centre & wing beams 1. Wheels 3. Autofold 9. Harrow sections 13. Autofold hydraulics 18. Hydraulic adjustable model 19

SAFETY. Trailer, centre & wing beams 1. Wheels 3. Autofold 9. Harrow sections 13. Autofold hydraulics 18. Hydraulic adjustable model 19 MANUAL Trailer, centre & wing beams Wheels Autofold Harrow sections Autofold hydraulics Hydraulic adjustable model Safety lights Options, decals Previous hydraulic system Operations Maintenance Safety,

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG MID-MOUNT 143247 v2.0 D E G E L M A N I N D U S T R I E S L T D. B O X 8 3 0-2 7 2 I N D U S T R I A L D R I V E, R E G I N A, S K, C A N A D A, S 4 P 3 B 1 F A X 306.543.2140

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 13558 v1.0 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, SP 3B1 FAX 306.53.210 PH 306.53.7 1.800.667.355 DEGELMAN.COM JOHN DEERE 9000/9020 SERIES

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 142663 v1.3 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM JOHN DEERE 8130-8530,

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 142664 v1.3 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM JOHN DEERE 8130-8530,

More information

AG PRO SS Owner s Manual & Parts Book

AG PRO SS Owner s Manual & Parts Book AG PRO SS Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 63-19460 SN: 10204276-... Date 1-10-2017 Description Contents Page To The Owner, Maintenance, Safety

More information

BRAKE ASSIST SYSTEM INSERT SHEET

BRAKE ASSIST SYSTEM INSERT SHEET BRAKE ASSIST SYSTEM INSERT SHEET 246779 v1.1 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM M28 & M34 MANURE

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 4333 v.0 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B FAX 306.543.240 PH 306.543.4447.800.667.3545 DEGELMAN.COM JOHN DEERE 9R SERIES

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 143251 v2.2 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM CASE STX / NH

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 143302 v1.2 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM JOHN DEERE 9030

More information

4200 & 6200 Owner s Manual & Parts Book

4200 & 6200 Owner s Manual & Parts Book 00 & 00 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model PN: - Dealer Date --0 Description Page To The Owner & Maintenance Safety Precautions & Torque Specifications Skid

More information

Post Driver Attachment

Post Driver Attachment Attachment (Shown with Optional Power Cell Rotator) Models - 600, 850 Safety Instructions This safety alert symbol indicates important safety messages in this manual. When you see this symbol, carefully

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 143330 v1.2 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM JOHN DEERE 9R

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 143329 v1.2 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM JOHN DEERE 9R

More information

450 & Slant Top Owner s Manual & Parts Book

450 & Slant Top Owner s Manual & Parts Book 0 & 0 - Slant Top Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model PN: - Dealer Date -- Contents Description Page To The Owner & Maintenance Safety Precautions & Torque

More information

1300 Dozer Owner s Manual & Parts Book

1300 Dozer Owner s Manual & Parts Book 300 Dozer Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 3-2472 0--2008 Contents Description Page To The Owner 2 Maintenance & Caution 2 Safety Precautions

More information

12-20 (V6) - AG PRO PLUS

12-20 (V6) - AG PRO PLUS 12-20 (V6) - AG PRO PLUS Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 6-18817 Date -17-201 Contents Description Page To The Owner, Warning, Maintenance

More information

LIMITED WARRANTY DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES

LIMITED WARRANTY DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Published 08/15 LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material

More information

RITE WAY MFG. CO. LTD. P.O.

RITE WAY MFG. CO. LTD. P.O. CO. LTD. P.O. Box 328 Imperial, Saskatchewan Canada, S0G 2J0 Ph: (306) 963-280 Fax: (306) 963-2660 Web Site: www.ritewaymfg.com E-mail: info@ritewaymfg.com Table of Contents SPECIFICATIONS... WARNING...2

More information

EURO REEL

EURO REEL Date Purchased Machine Serial No. Options The key number system in this parts book is arranged as follows: Please order parts by number - Key numbers with two circles denotes main assemblies. - Key numbers

More information

General Information. Assembly Instructions. Dual Marker Option

General Information. Assembly Instructions. Dual Marker Option Installation Instructions 12 Center Pivot Hitch Used with: 12 Center Pivot Hitch General Information! When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00

More information

VALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X

VALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X TRACTOR AND VALVE KIT GENERAL

More information

VALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS

VALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT NEW HOLLAND 73 LOADER NEW HOLLAND TRACTORS MODEL 2WD FWA LESS CAB WITH CAB TT55 X X X TT75 X X X Valve and plumbing kit can be installed

More information

CAM-LIFT WHEEL MOVE KIT 1500-SERIES S-DRIVE STANDARD CONVEYORS ASSEMBLY MANUAL

CAM-LIFT WHEEL MOVE KIT 1500-SERIES S-DRIVE STANDARD CONVEYORS ASSEMBLY MANUAL CAM-LIFT WHEEL MOVE KIT ASSEMBLY MANUAL This manual applies to the following models: 1565, 1575, 1585, 1590, 15100 ORIGINAL INSTRUCTIONS Read this manual before using product. Failure to follow instructions

More information

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: -0 RPM & -000 RPM SECTION: 9 0 Griffin Ave. Selma, Al. 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com April, 0 BUSH HOG/ LAND MAINTENANCE

More information

BUCKET SWEEPER OPERATORS & PARTS MANUAL 2852 & 3174 SERIES

BUCKET SWEEPER OPERATORS & PARTS MANUAL 2852 & 3174 SERIES OM628 BUCKET SWEEPER OPERATORS & PARTS MANUAL 2852 & 3174 SERIES MODEL 12002-5 FOOT WIDE X 24 INCH DIAMETER (SKID-STEER) MODEL 12004-6 FOOT WIDE X 24 INCH DIAMETER (SKID-STEER) MODEL 12017-6 FOOT WIDE

More information

Mulching and Finishing Mowers MP and FP

Mulching and Finishing Mowers MP and FP Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)

More information

OWNER S, INSTALLATION AND PARTS MANUAL

OWNER S, INSTALLATION AND PARTS MANUAL OWNER S, INSTALLATION AND PARTS MANUAL QUICK HITCH CONVERSION KIT CONVERTS 24/MT TO 26 SERIES HITCH FOR PLOW SERIAL NUMBERS AFTER 24G100000 24D100000 MTD200000 MTG200000 2005 Sno-Way International 97101198A

More information

Light Duty Angle Snow Blade

Light Duty Angle Snow Blade Light Duty Angle Snow Blade Model Number SBS -LD. Serial Number. Phone: 320-393-7080 1/6/07 Revised 1/1/13 SBS-LD Features of Virnig Mfg. Inc. Light Duty Angle Snow Blade include: 2 bore, 8 3/8 stroke

More information

530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B

530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 2 27602311 1 HARNESS, WIRE, Front 3 27602221 1 HARNESS, WIRE, Rear (530B) 4 27602202 2 LIGHT ASSY., Red 5

More information

! CAUTION! ! WARNING!

! CAUTION! ! WARNING! Assembly Instructions! 3N-3010P, No-Till Flat Fold Marker Option Used with: 3N-3010P Drills When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your

More information

FIXED HITCH LAND ROLLER. Operation & Maintenance Manual OPERATORS MANUAL & PART LIST

FIXED HITCH LAND ROLLER. Operation & Maintenance Manual OPERATORS MANUAL & PART LIST FIXED HITCH LAND ROLLER Operation & Maintenance Manual OPERATORS MANUAL & PART LIST Contents SECTION 1 PAGE INTRODUCTION 1 MANUAL & EQUIPMENT DETAILS 2 SPECIFICATIONS 3 PRE-DELIVERY INSPECTION 4 SERVICE

More information

OPERATOR & PARTS MANUAL

OPERATOR & PARTS MANUAL OPERATOR & PARTS MANUAL 143390 v1.0 DEGELMAN INDUSTRIES LTD. BOX 830-7 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM LANDROLLER 8000 FIVE-PLEX

More information

VIRNIG MFG INC. V Snow Blade

VIRNIG MFG INC. V Snow Blade VIRNIG MFG INC. V Snow Blade OWNERS/OPERTORS MNUL Model Number SBV. Serial Number. Date of Manufacture. Phone: 30-393-7080 08/4/06 Warranty Virnig Manufacturing, Inc. products are warranted to be free

More information

AG PRODUCTS, LTD. YOU RE ALWAYS AHEAD... WITH A MODERN BEHIND.

AG PRODUCTS, LTD. YOU RE ALWAYS AHEAD... WITH A MODERN BEHIND. SUMMER 2016 BADGER DISC HARROW Operator s Manual 011-1156 011-1166 001-1501 001-1501-1 011-1167 001-1501-2 001-1501-3 011-1176 001-1501-4 011-1177 MODERN AG PRODUCTS, LTD. YOU RE ALWAYS AHEAD... WITH A

More information

Operator and Parts Manual. Tandem Disc. 4490N Model - Medium Duty - 3 Section

Operator and Parts Manual. Tandem Disc. 4490N Model - Medium Duty - 3 Section Operator and Parts Manual Tandem Disc 4490N Model - Medium Duty - 3 Section 052011 88705164 Table of Contents - 4490N Tandem Disc Table of Contents Introduction...5 Safety...6 Safety Instructions...6

More information

Part Number Published 08/ Series Blade. 181 Series Blade

Part Number Published 08/ Series Blade. 181 Series Blade 141 SERIES 181 SERIES Published 08/15 Part Number 50076192 141 Series Blade 181 Series Blade To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute

More information

OPERATOR MANUAL & PARTS CATALOG

OPERATOR MANUAL & PARTS CATALOG OPERATOR MANUAL & PARTS CATALOG 168 v1.6 DEGELMAN INDUSTRIES LTD. BOX 80-7 INDUSTRIAL DRIVE, REGINA, SK, CANADA, SP B1 FAX 06.5.10 PH 06.5.7 1.800.667.55 DEGELMAN.COM STRAWMASTER 7000 0, 50, 6, 70 & 8

More information

OWNER S, INSTALLATION AND PARTS MANUAL

OWNER S, INSTALLATION AND PARTS MANUAL OWNER S, INSTALLATION AND PARTS MANUAL QUICK HITCH CONVERSION KIT CONVERTS ST TO 22 SERIES HITCH FOR PLOW SERIAL NUMBERS AFTER STD100000 STG100000 2006 Sno-Way International 97101306A TABLE OF CONTENTS

More information

LP1207 LP1208 LP1210 LAND PLANES LP12_5TL15788_06/10

LP1207 LP1208 LP1210 LAND PLANES LP12_5TL15788_06/10 LP1207 LP1208 LP1210 O P E R A T O R ' S M A N U A L LAND PLANES LP12_5TL15788_06/10 TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Frontier dealer. Read manual

More information

WX540-LEU Trailer Log Splitter Parts Manual

WX540-LEU Trailer Log Splitter Parts Manual EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-98 Fax: (9) 99- www.embmfg.com WX0-LEU Trailer Log Splitter Parts Manual S/N E9USES00 & After Refer to the operators manual

More information

Operator s Manual. Sabre Crop Divider

Operator s Manual. Sabre Crop Divider Operator s Manual Sabre Crop Divider Canadian Agri Technologies Inc. 47 Halparin Drive Winnipeg, MB. R3X 1Z9 ph. 204 992.2484 fax. 204 237.0552 www.sabredivider.com TOLL FREE PARTS LINE 1 866 792-8437

More information

Rotary Brush Cutter. Model Number RBV. Serial Number. Serial Number and Greater. Maximum Flow Rate gpm. Phone: RBV

Rotary Brush Cutter. Model Number RBV. Serial Number. Serial Number and Greater. Maximum Flow Rate gpm. Phone: RBV Rotary Brush Cutter Model Number RBV. Serial Number. Serial Number 75 and Greater Maximum Flow Rate gpm. Phone: 0--700 0/5/0 Revised // RBV Features of Virnig Mfg. Inc. Rotary Brush Cutter include: diameter

More information

Dozer Blade. Cylinder Bushing Installation. Hydraulic Installation. Model Number DZR. Serial Number. Phone: DZR

Dozer Blade. Cylinder Bushing Installation. Hydraulic Installation. Model Number DZR. Serial Number. Phone: DZR Cylinder Bushing Installation Dozer Blade All 3 cylinders use 4 bushings each. Hydraulic Installation Tilt Cylinder Left Side Angle Cylinder Model Number DZR. Serial Number. Right Side Angle Cylinder Phone:

More information

! CAUTION! ! WARNING!

! CAUTION! ! WARNING! Assembly Instructions! 24- and 30-Foot, No-Till Flat Fold Marker Option Used with: 2N-2410 and 2N-3010 Drills 2N-2420 and 2N-3020 Drills When you see this symbol, the subsequent instructions and warnings

More information

MODELS EWR820, EWR1023, EWR1227 PULL TYPE HAY RAKES PARTS MANUAL SECTION 19

MODELS EWR820, EWR1023, EWR1227 PULL TYPE HAY RAKES PARTS MANUAL SECTION 19 EWR MODELS EWR820, EWR1023, EWR1227 PULL TYPE HAY RAKES Published 04/11 PARTS MANUAL SECTION 19 MATERIAL HANDLING PARTS MANUAL PARTS ORDERING GUIDE The following instructions are offered to help eliminate

More information

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14 8 FLEX WING ROTARY CUTTER Published 09/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must

More information

KONGSKILDE 8200 DF Field Cultivator - Assembly/Parts

KONGSKILDE 8200 DF Field Cultivator - Assembly/Parts KONGSKILDE 8200 DF Field Cultivator - Assembly/Parts Kongskilde 8200 Models 768236901 8236 Field Cultivator (36.5') 768238901 8238 Field Cultivator (38.5') 768240901 8240 Field Cultivator (40.5') 768242901

More information

VALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS

VALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS AGCO MASSEY FERGUSON CAB ROPS ST34A 1533 X ST41A 1540 N/A X TRACTOR AND VALVE KIT GENERAL

More information

2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER

2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER 0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions

More information

VALVE AND PLUMBING KIT 2409 LOADER CUB CADET & KIOTI TRACTORS

VALVE AND PLUMBING KIT 2409 LOADER CUB CADET & KIOTI TRACTORS ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT 2409 LOADER CUB CADET & KIOTI TRACTORS TRACTOR MODELS CUB CADET 8404, 8454 KIOTI DK45, DK50 ROPS X X TRACTOR AND VALVE KIT GENERAL INFORMATION

More information

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER NO. 3640 OPERATOR S MANUAL TO THE OWNER: Congratulations on your purchase of a new W & A Top Leveling Stacker Level Bander. Your selection is an indication

More information

XH1500/XH1000 S2 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO

XH1500/XH1000 S2 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO Published: 0/0 XH00/XH000 S ROTARY CUTTERS S/N C00 C0 inclusive PARTS MANUAL C0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this Parts

More information

ROTARY TILLER. Operation, Service & Parts Manual For "AS" Series. FORM: ASTillerBook.QXD

ROTARY TILLER. Operation, Service & Parts Manual For AS Series. FORM: ASTillerBook.QXD ROTARY TILLER Operation, Service & Parts Manual For "AS" Series FORM: ASTillerBook.QXD April 2002 TABLE OF CONTENTS Preparation......................................1 Assembly Instructions.............................2

More information

Operator s/parts Manual

Operator s/parts Manual Operator s/parts Manual 3-Point Solid Stand Drills Pull Hitch Package Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the operator s manual entirely. When you see this symbol, the subsequent

More information

WX540-LEU Trailer Log Splitter Parts Manual

WX540-LEU Trailer Log Splitter Parts Manual EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (59) 99-98 Fax: (59) 99- www.embmfg.com WX50-LEU Trailer Log Splitter Parts Manual S/N E9USXDS000 & After Refer to the operators manual

More information

4815RR1,4810RR RR1,14810RR1

4815RR1,4810RR RR1,14810RR1 4815RR1,4810RR1 14815RR1,14810RR1 This Manual applies to Models: 4815RR1, 4810RR1, 14815RR1, 14810RR1 FLEX-WING ROTARY CUTTERS / SHREDDERS Published 07/16 Part No. 50076491 To the Owner/Operator/Dealer

More information

R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header. Parts Catalog Revision C

R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header. Parts Catalog Revision C R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Parts Catalog R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Published: April, 2015 NOTE:

More information

Installation Instructions

Installation Instructions Fisher Engineering P.O. Box 529 Rockland, Maine 04841 June 15, 2004 Lit. No. 27589 Installation Instructions Table of Contents Safety Information... 2 Blade and A-Frame Assembly... 5 Blade Assembly and

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY

More information

STANDARD STEEL PLOW BLADE ASSEMBLY INSTRUCTIONS

STANDARD STEEL PLOW BLADE ASSEMBLY INSTRUCTIONS WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 FORM NO. 13590 September 1, 1999 STANDARD STEEL PLOW BLADE Blade No. 60120 or 60125, or 60018 A, Q, & L Box No. 61720 Hydraulics Box No. 56365

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,

More information

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No. Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol

More information

OPERATOR & PARTS MANUAL

OPERATOR & PARTS MANUAL OPERATOR & PARTS MANUAL 14334 v1.1 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.43.2140 PH 306.43.4447 1.800.667.34 DEGELMAN.COM PRO-TILL QUICK-START GUIDE

More information

EZ Build Assembly and Installation

EZ Build Assembly and Installation Form No. 1-1136R May 2016 EZ Build Assembly and Installation 41530 Lot Pro Diamond Edge Plow Standard Operating System with E-73 12V Hydraulic Unit Meyer Products LLC reserves the right, under its continuing

More information

OPERATOR & PARTS MANUAL

OPERATOR & PARTS MANUAL OPERATOR & PARTS MANUAL 1446 v1. DEGELMAN INDUSTRIES LTD. BOX 80-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P B1 FAX 06.54.2140 PH 06.54.4447 1.800.667.545 DEGELMAN.COM OPERATORS SECTION - TABLE OF CONTENTS

More information

ASSEMBLY MANUAL. Keep With Operator s Manual

ASSEMBLY MANUAL. Keep With Operator s Manual ASSEMBLY MANUAL Keep With Operator s Manual 2-6347 VALVE AND PLUMBING KIT INSTRUCTIONS SMC 64Q LOADER KUBOTA TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB B2150DT & B2150HSD X X B8200DT & B8200HSD X X B9200DT

More information

LOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List

LOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List LOG CHOP Hydraulic Wood Guillotine Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk

More information

Assembly Instructions. General Information

Assembly Instructions. General Information Great Plains Mfg., Inc. Installation Instructions! Used with: 1200, 1210 and 1220 1500, 1510 and 1520 2000, 2010 and 2020 12, 15 and 20 Series Drills Folding Markers When you see this symbol, the subsequent

More information

Rotary Brush Cutter (Standard Flow)

Rotary Brush Cutter (Standard Flow) Rotary Brush Cutter (Standard Flow) Model Number RBV. Serial Number. Serial Number 6795-0050 Maximum Flow Rate gpm. For and 5 GPM Max Models Phone: 0-9-700 0/5/0 Revised // RBV Features of Virnig Mfg.

More information

KONGSKILDE 9200 DF Vertical Tillage - Assembly/Parts

KONGSKILDE 9200 DF Vertical Tillage - Assembly/Parts KONGSKILDE 9200 DF Vertical Tillage - Assembly/Parts Kongskilde 9200 *Model may not be exactly as shown. Kongskilde reserves the right to make changes to product designs and specifications without notice

More information

PARTS MANUAL SECTION 46

PARTS MANUAL SECTION 46 RTXG SERIES ROTARY TILLERS Published 08/16 MODELS RTX85G, RTX92G PARTS MANUAL SECTION 46 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation

More information

OPERATOR & PARTS MANUAL

OPERATOR & PARTS MANUAL OPERATOR & PARTS MANUAL 143365 v1.7 DEGELMAN INDUSTRIES LTD. BOX 830-272 INDUSTRIAL DRIVE, REGINA, SK, CANADA, S4P 3B1 FAX 306.543.2140 PH 306.543.4447 1.800.667.3545 DEGELMAN.COM PRO-TILL 20/26/28 Serial

More information

VALVE AND PLUMBING KIT 4211 LOADER CASE IH JX55, JX65, JX75,JX85, AND JX95 TRACKTORS NON-CAB

VALVE AND PLUMBING KIT 4211 LOADER CASE IH JX55, JX65, JX75,JX85, AND JX95 TRACKTORS NON-CAB ASSEMBLY MANUAL 2-7293 Keep With Operator s Manual VALVE AND PLUMBING KIT 42 LOADER CASE IH JX55, JX65, JX75,JX5, AND JX95 TRACKTORS NON-CAB Valve and plumbing kit can be installed using tools ordinarily

More information

V50 Rotary Brush Cutter-Standard Deck (RBV) (Standard and High Flow Models)

V50 Rotary Brush Cutter-Standard Deck (RBV) (Standard and High Flow Models) Optional Front Caster Assembly (BCC) 00PP /"- TOP LOCK NUT PP 7/" X -/" LG LYNCH PIN 779PP /"- X " LG HHCS 09PP /" X 0GA MACH BUSHING 09PP /" EXTERNAL SNAP RING PP /" DIA X 9/" LG BUSH 7 0PP /"- STRAIGHT

More information

SPORT/UTILITY BLADE ASSEMBLY INSTRUCTIONS

SPORT/UTILITY BLADE ASSEMBLY INSTRUCTIONS WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 FORM NO. 13629 September 1, 1999 SPORT/UTILITY BLADE ASSEMBLY INSTRUCTIONS Sport/Utility Blade No. 61300 A, Q & L Box No. 61930 Hydraulics Box

More information

TO THE OWNER. Model : Product Serial Number : WARNING

TO THE OWNER. Model : Product Serial Number : WARNING 28174 (09/2/11) TO THE OWNER This manual contains information concerning the adjustment, assembly and maintenance of your Tube-Line Accelerator. You have purchased a dependable machine, but only by proper

More information

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0

More information

OPERATION AND MAINTENANCE MANUAL WASP, Inc. 757 Towbar Model No. A01568D

OPERATION AND MAINTENANCE MANUAL WASP, Inc. 757 Towbar Model No. A01568D OPERATION AND MAINTENANCE MANUAL WASP, Inc. 757 Towbar Model No. A01568D WASP RECORD OF REVISIONS REV. ISSUE DATE BY REV. ISSUE DATE BY NO. DATE INSERTED NO. DATE INSERTED Original May 19/97 001 June 10/03

More information

Table of Contents QUICK REFERENCE GUIDE FOR 52K21Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 52K21Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... 5 2 K 2 1 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 52K21Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS...E - 1 CONTROL COMPONENTS

More information

Table of Contents QUICK REFERENCE GUIDE FOR 42K17Z...A - 1 DECK COMPONENTS... B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 42K17Z...A - 1 DECK COMPONENTS... B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS... 4 2 K 1 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 42K1Z...A - 1 DECK COMPONENTS... B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS... E - 1 CONTROL COMPONENTS

More information

Operator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0

Operator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0 Operator s Manual Nitro 750 Nitro 750X Nitro 1000 Nitro 1000X September.27.2018REV0 Table of Contents Introduction...3 Safety.....4 Equipment Requirements......5 What You Have Received. 5 Serial Number...6

More information

320 Series Models 325, 326, 327

320 Series Models 325, 326, 327 0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and

More information

2 Cylinder Grapples. Model Number.

2 Cylinder Grapples. Model Number. Cylinder Grapples SGV STG SRGV HSRGV SBG ISG TBG Model Number. Serial Number. Serial Number 0400-059 AND 0609, 0630, 0735, 0736, 0737, 0750, 075, 09, 00, 0, 0, 03, 09,09, 074, 075, 076, 077, 90 Manufacture

More information

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W B&W Trailer Hitches 1216 Hawaii Rd / PO Box 186 Humboldt, KS 66748 P:620.473.3664 F:620.869.9031 Turnoverball Gooseneck Hitch Installation Instructions

More information

HIGH SPEED COMPACT DISC (HCD-32) Operation & Maintenance Manual OPERATORS MANUAL & PART LIST

HIGH SPEED COMPACT DISC (HCD-32) Operation & Maintenance Manual OPERATORS MANUAL & PART LIST HIGH SPEED COMPACT DISC (HCD-32) Operation & Maintenance Manual OPERATORS MANUAL & PART LIST Quick Start Guide Hydraulic Connections to Tractor Yellow Lifting/lowering main frame and packers Black Disc

More information

SkidPro. Hydraulic Snow Blade/Pusher Combo OWNERS/OPERATORS MANUAL. Model Number HSBP.

SkidPro. Hydraulic Snow Blade/Pusher Combo OWNERS/OPERATORS MANUAL. Model Number HSBP. SkidPro Hydraulic Snow Blade/Pusher Combo OWNERS/OPERATORS MANUAL Model Number HSBP. Serial Number. Serial Numbers 36, 3600-3603 & 37000 and Greater Manufacture Date 0/0/ Current Phone: 77-37-6 06/0/5

More information

Table of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... 4 8 K 1 9 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS...E - 1 CONTROL COMPONENTS

More information

Serial #

Serial # Serial #155000-155999 January 2015 Blank page GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM ASSEMBLY 4-5 BASKET HANGER, FRAME, & LIFT ASSEMBLY 6-7

More information

Wheel Horse. 36 Tiller. Model No & Up. Operator s Manual

Wheel Horse. 36 Tiller. Model No & Up. Operator s Manual FORM NO. 8 9 Rev. A Wheel Horse 6 Tiller for Classic Garden Tractors Model No. 7970 690000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the

More information

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER NO. 3640 OPERATOR S MANUAL TO THE OWNER: Congratulations on your purchase of a new W & A Top Leveling Stacker Level Bander. Your selection is an indication

More information