RE / Connection Elements for Compact Modules. The Drive & Control Company
|
|
- Victor Bryant
- 5 years ago
- Views:
Transcription
1 RE / Connection Elements for Compact Modules The Drive & Control Company
2 Connection Elements Connection elements for compact modules allow the fast and easy adaptation to profiles and supports made with the Rexroth Structural Aluminum raming program. The connection elements are sold as assemblies with all parts needed for mounting compact modules. A series of connection elements is also available for combining compact modules on top of each other. or further information, see the Compact Module catalog and the Structural Aluminum raming catalog. Do not attach or support compact modules on the end bearing assemblies! The weight bearing portion is the main body! or motor mounting via a belt mount, the motor can extend into the working area of neighboring axes. Watch for interfering edges! Connection with s Compact Module with 1 or 2 carriages perpendicular to the support profile (-direction) attached to the main body Carriage travels Connection with Connection Plates Compact Modules with 1 or 2 carriages parallel to the support profile (-direction) attached to the main body Carriage travels RE 82618/
3 Connection with s Carriage travels/main body fixed Carriage fixed/main body travels Compact Module with 1 or 2 carriages Compact Module with 2 carriages Compact Module perpendicular to support profile (-direction) Compact Module perpendicular to support profile (-direction) Compact Module parallel to support profile (-direction) Compact Module parallel to support profile (-direction) Compact Module perpendicular to support profile (-direction) Compact Module perpendicular to support profile (-direction) 3 RE 82618/
4 Connection Elements ing Kits Compact Module in -direction carriage travels Materials T-Nut aluminum alloy steel Surface/Color black anodized Screw black, Tuflok coated T-Nut zinc-plated ing kits allow for quick installation of compact modules on suitable support structures. The screw spacing is set up for profiles with spacing patterns of 50 and 40 mm. Attachment is to the main body. The compact module is available with one or two carriages. Assembly Set up supporting structure Pre-install kits Position the compact module Counterbore for M4 ISO 4762 Counterbore for M6 ISO 4762 Counterbore for M8 ISO 4762 Observe the maximum fastening torque in the table when attaching the compact modules Recommended quantity of clamps: 3 pieces per meter on each side (design the support structure accordingly!) B A 5 14,5 3, ,3 3,4 11, ,5 Compact Module CKK CKK CKK astening Torque for Mounting Screws or frictional factor Scope of Delivery Dimensions (mm) A B ing Kits 2 pieces clamps 4 pieces socket head cap screws 4 pieces T-Nuts CKK M4 M6 M CKK T L T L CKK CKK Module Size Pattern Dims. (mm) Weight Dims. T L (kg) CKK CKK and CKK CKK T L CKK Part Number for Kit RE 82618/
5 Connection Plate Kits Compact Module in -direction carriage travels Material Connection plate T-Nut AlMgSi 0,5 25 aluminum alloy steel Surface/ Color Connection plate black anodized black anodized Screws black, Tuflok coated Nut for T-slot plain Washer zinc-plated T-Nut zinc-plated Connection plate kits are set up for a profiles with spacing patterns of 50 and 40 mm. Attachment is to the main body. The compact module is available with one or two carriages. Assembly Set up supporting structure Attach connection plates to the supporting structure Position the compact module Observe the maximum fastening torque in the table when attaching the compact modules D C G Recommended quantity of connection plates: 3 pieces per meter A D E H J I astening Torque for Mounting Screws or frictional factor M4 M6 M8 D B Scope of Delivery Connection Plate Kits: 1 piece connection plate 2 pieces clamps 12 pieces socket head cap screws 8 pieces nuts for T-slot 4 pieces washers 4 pieces T-Nuts Compact Dimension (mm) Weight Module A B C D E G H I J (kg) CKK CKK CKK Part No. for Kit RE 82618/
6 Connection Elements Connection Kits Compact Module in - or -direction carriage travels Material Threaded bar AlMgSi aluminum alloy steel Surface/ color clear anodized black anodized Screws black, Tuflok coated Threaded bar zinc-plated Connection bracket kits are set up for profiles with spacing patterns of 50 mm. Attachment is to the main body. The compact module is available with one or two carriages. Assembly Set up supporting structure Install brackets on supporting structure Attach the compact module to the brackets Observe the maximum fastening torque in the table G A astening Torque for Mounting Screws or frictional factor M4 M5 M6 M H B E 50 I C Scope of Delivery Connection Kits: 1 piece bracket 2 pieces clamps 12 pieces socket head cap screws 2 pieces threaded bars Compact Dimensions (mm) Weight Module A B C E G H I (kg) CKK CKK CKK Part No. of Kit RE 82618/
7 Connection Kits Compact Module in - or -direction main body travels Material AlMgSi Threaded bar steel Surface/Color clear anodized Set-screw plain, hardened Screws black, Tuflok coated Threaded bar zinc-plated Connection bracket kits are set up for profiles with spacing patterns of 50 mm. Attachment is to the carriage. The compact module is available with two carriages only. Assembly Set up supporting structure Install brackets on supporting structure Attach the compact module to the brackets Observe the maximum fastening torque in the table B A C D astening Torque for Mounting Screws or frictional factor G 8.8 M4 M5 M6 M H 50 E I 50 Scope of Delivery Connection Kits: 1 piece bracket 2 pieces set-screws 12 pieces socket head cap screws 2 pieces threaded bars Compact Dimensions (mm) Weight Module A B C D E G H I (kg) CKK CKK CKK Part No. of Kit RE 82618/
8 Connection Elements Connection Kits Compact Module in -direction carriage travels Material Threaded bar AlMgSi aluminum alloy steel Surface/ Color clear anodized black anodized Screws black, Tuflok coated Threaded bar zinc-plated Connection bracket kits are set up for profiles with spacing patterns of 50 mm. Attachment is to the main body. The compact module is available with one or two carriages. Assembly Set up supporting structure Install brackets on supporting structure Attach the compact module to the brackets B 50 C G Observe the maximum fastening torque in the table H A astening Torque for Mounting Screws or frictional factor M4 M6 M8 E Scope of Delivery Connection Kits: 1 piece bracket 2 pieces clamp 12 pieces socket head cap screws 2 pieces threaded bars Compact Dimensions (mm) Weight Module A B C E G H (kg) CKK CKK CKK Part No. of Kit RE 82618/
9 Connection Kits Compact Module in -direction main body travels Material Threaded bar AlMgSi steel Surface/ Color clear anodized Set-screws plain, hardened Screws black, Tuflok coated Threaded bar zinc-plated Connection bracket kits are set up for profiles with spacing patterns of 50 mm. Attachment is to the carriage. The compact module is available with two carriages only. Assembly Set up supporting structure Attach brackets to module Attach module with brackets to supporting structure Observe the maximum fastening torque in the table B C 50 G astening Torque for Mounting Screws H A or frictional factor M4 M5 M6 M E Scope of Delivery Connection Kits: 1 piece bracket 2 pieces set-screws 12 pieces socket head cap screws 2 pieces threaded bars Compact Dimensions (mm) Weight Module A B C D E G (kg) CKK CKK CKK Part No. of Kit RE 82618/
10 Connection Elements RE 82618/
11 11 RE 82618/
12 Bosch Rexroth AG Linear Motion and Assembly Technologies Ernst-Sachs-Straße 100 D Schweinfurt, Germany Telefon ( ) Telefax ( ) (generell) Telefax ( ) (direct) info.brl@boschrexroth.de Subject to technical modifications Bosch Rexroth AG 2004 Printed in Germany - p 2004/01/3/M Connection Elements for Compact Modules RE /
Ball Rail Systems Corrosion-resistant
Ball Rail Systems Corrosion-resistant RE 82 222/2003-09 The Drive & Control Company Resist NR II Resist NR Aluminum Runner Blocks Size 15 35 Aluminum Version made of Aluminum Same price as steel version
More informationR310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationCompact Modules CKK/CKR 9-70
Compact Modules CKK/CKR 9-70 (with Ball Rail System, Ball Screw Drive or Toothed Belt Drive) R310EN 2624 (2008.10) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball
More informationeline Ball Screw Assemblies
eline Ball Screw Assemblies R310EN 3314 (2005.06) The Drive & Control Company R310EN 3314 (2005.06) Bosch Rexroth AG 3 Product Overview 4 Technical Data 6 with Screw-in Single Nut ZEV-E-S Single fixed
More informationeline Profiled Rail Systems
eline Profiled Rail Systems with Ball and Cam Roller Runner Blocks R310EN 2211 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationEfficient Handling Solutions. Solutions for handling applications from Rexroth
Solutions for handling applications from Rexroth 2 3 The efficient route to best results Whatever you want to automate, we will find the most appropriate solution for each specific application. Our experiences
More informationOverview. Bosch Rexroth Corp /11 Aluminum Framing. Linear Motion and Assembly Technologies. Section 8: Air Supply Elements
91 500 201 0/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Overview Air supply elements convert certain profiles into compressed air bars. Convenient and flexible pneumatic connections
More informationConnection technology for Linear Motion Systems 1.3
Connection technology for Linear Motion Systems 1.3 2 Connection technology for Linear Motion Systems 1.3 Connection technology for Linear Motion Systems 1.3 3 Contents 4 Combination options for -Z linear
More informationLinear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
More informationC 01_1 Headline_36pt/14.4mm
Compact Modules C 01_1 Headline_36pt/14.4mm Catalog addition: Lubrication / Cover Resist C 01_2 Subheadline_15pt/7.2mm 2 Compact Modules - catalog addition Identification system for short product names
More informationGoTo Europe Focused Delivery Program. Product overview assembly technology
GoTo Europe Focused Delivery Program Product overview assembly technology 2 GoTo Europe Products you need, delivered when you need them In today s global competition every day counts. Fast response times
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationSection 10 Conveyors and Transport Components
1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationSection 13 Bosch EcoSlide Linear Sliding Carriages and Bearings
coslide Linear Sliding arriages and earings 1 Section osch coslide Linear Sliding arriages and earings The new osch coslides, along with the new slider bearings and the profile slider, provide an inexpensive
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More informationSTAR Ball Rail Tables TKK
before operating X4 X8 X3 X1 X2 S1 S2 12 4 13 5 14 6 15 7 16 8 1 2 3 9 10 11 1 2 3 4 5 6 8.8 S3 X30 Indramat DANGER! AC-CONTROLLER High voltage Danger of electrical shock Do not touch electrical connnections
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationLinear Motion Technology Handbook. The Drive & Control Company
Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl
More informationProduct overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)
10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact
More informationProduct Description. Characteristic features R310A 2402 ( ) Linear Modules MLR
9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationRexMover Series 277 & 297 Rodless Shuttle Cylinder
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RexMover Series 277 & 297 Rodless Shuttle Cylinder Catalog pages
More informationStandard gripper Series GSP
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Standard gripper Series GSP Technical Data Products Series GSP-P
More informationPrecision Modules PSK. The Drive & Control Company
Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear
More informationOmega Modules OBB R / EN. Instructions
Omega Modules OBB R320103025/2011-12 Instructions 2/40 Bosch Rexroth AG Omega Modules OBB R320103025/2011-12 This data has been provided solely for the purpose of product description. No statement regarding
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationProduct Information. Compact linear module ELS
Product Information ELS ELS Modular. Compact. Precise. ELS compact linear module with spindle drive and profiled rail guide Field of application For use in clean and slightly polluted environments. Simple
More informationThe Easiest Way to Build a Custom Handling System
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service The Easiest Way to Build a Custom Handling System camoline the Cartesian Motion building system 2 Rationalizing
More informationCylinder Accessories Handling connection kits Easy2Combine. Brochure
Cylinder Accessories Handling connection kits Easy2Combine Brochure 2 Cylinder Accessories Handling connection kits Easy2Combine For combination: RTC-HD / RTC-CG 4 For combination: MSC / RCM 7 For combination:
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More information45x45 2S x60H x90x90. 45x90 3SA 2-35
8981 500 01 08/11 Aluminum Framing Linear Motion and Assembly Technologies Bosch Rexroth Corp. 7 -Series Profiles x -6 xh -7 x 1S -7 x S -8 x SA -8 x 3S -9 50x50T -9 xr -30 xhr -30 x30 R, x R, x60 R -31
More informationTechnical Data and Dimensions EMC
Technical Data Electromechanical Cylinders EMC 5 Technical Data and Dimensions EMC Sizes 3 to 00 follow the standard cylinder series according to ISO 555. Built-in ball screw drives have a diameter of
More informationR310EN 2302 ( ) The Drive & Control Company
R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical
More informationMagSpring Magnetic Springs
MagSpring Magnetic Springs MagSpring, unlike mechanical springs, deliver a constant force over their entire working rang MagSpring, consists of only two components: a stator and a slider MagSprings are
More informationThe New Generation ISO Cylinders for a Dynamic Future
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service The New Generation ISO Cylinders for a Dynamic Future Rexroth s new generation of ISO pneumatic cylinders
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationProportional cartridge throttle valve, with inductive position transducer, pilot operated
Proportional cartridge throttle valve, with inductive position transducer, pilot operated RE 29215/09.05 1/18 Type FESX Nominal size 16, 25, 32, 40, 50 Unit series 1X Maximum working pressure A, B, X 315
More information105000BT & BT/CT Series
15BT & 16BT/CT Series Ball Bearing and Cross Roller Bearing Tables Designed for high accuracy and extremely smooth motion, 1 series tables are ideal for light to moderate duty cycle applications such as
More informationCompact. Flat. Productive. Compact Change System CWS
CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationPressure relief valve, direct operated, with DC motor actuation. Type DBGT. Features. Contents. RE Edition:
Pressure relief valve, direct operated, with DC motor actuation Type DBGT RE 2943 Edition: 204-02 Size 6 Component series 2X Maximum operating pressure: 700 bar Maximum flow: 2 l/min Features Contents
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationLINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:
R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction
More informationRoller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationLinear Bushings and Shafts
Linear Bushings and Shafts 45 b 1cr RA 83 100.1 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum Runner
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationServo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29045/10.05 Replaces: 01.05 1/12 Type 5WRPE 10 Size 10 Unit series 2X Maximum working pressure P 1, P 2, A, B 210 bar, T 50 bar Nominal flow rate
More informationDifferential pressure control, electrically adjustable
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Differential pressure control, electrically adjustable RE 92 709/0504
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationDirectional valves Pneumatically operated, according to standard ISO , 18 mm, CD02-AL series. Brochure
Directional valves Pneumatically operated, according to standard Brochure 2 Directional valves Pneumatically operated, according to standard 5/2-directional valve, Series CD02-AL Qn = 450 l/min plate connection
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationFlexible. Modular. Compact. Beta Universal Linear Module
Beta Flexible. Modular. Compact. Beta Universal Linear Module Universal linear module with optional toothed belt or spindle drive and various guiding options. Field of Application Universal linear module
More information4/2 servo solenoid valves with positive overlap and position feedback (Lvdt AC/AC)
4/2 servo solenoid valves with positive overlap and position feedbk (Lvdt AC/AC) RE 29020/08.05 Reples: 01.05 1/14 Type 4WRP..EA.. Size 6, 10 Unit series 1X Maximum working pressure of P, A, B 315 bar,
More informationMetrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
More informationProportional pressure relief valve with linear curve (Lvdt AC/AC)
Proportional pressure relief valve with linear curve (Lvdt AC/AC) RE 29152/07.05 1/10 Type DBETFX Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 200 bar Nominal flow rate Q nom 1 l/min
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
More informationNEW Linear Motion GoTo Items
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service DCL SIS (Sales Information Service) Issued by: Date: Bosch Rexroth Corporation 14001 South Lakes Drive,
More informationServo solenoid valves with electrical position feedback (Lvdt DC/DC ±10 V)
Servo solenoid valves with electrical position feedback (Lvdt DC/DC ±10 V) Type 5WRP 10 Size 10 Unit series 2X Maximum working pressure P 1, P 2, A, B 210 bar, T 50 bar Nominal flow rate 70 l/min ( p 11
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationLEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.
LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationfor flex design of MOTION GUIDE Journal Bearing
MOTION GUIDE for flex design of Motion Guide Systems provide the maintenance-free and smooth running of V-shaped rolling bearings fitted on both sides of flat rail. Various combinations of components are
More informationThe New Generation ISO Cylinders for a Dynamic Future
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service The New Generation ISO Cylinders for a Dynamic Future Rexroth s new generation of ISO pneumatic cylinders
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationUniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
More informationFlexible. Fast. Reliable. ELM Compact Linear Module
ELM Flexible. Fast. Reliable. ELM Compact Linear Module With linear direct drive and profiled rail guide with integrated measuring system for position detection and temperature monitoring. Field of Application
More informationTechnical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
More informationServo solenoid valves with electrical position feedback (Lvdt AC/AC)
Servo solenoid valves with electrical position feedback (Lvdt AC/AC) Type 4WRPH6 Size 6 Unit series 1X Maximum working pressure 250 bar Nominal flow rate 4...40 l/min ( p 70 bar) List of contents Contents
More informationHepcoMotion MHD Heavy Duty Track Roller Guidance System
Motion Without Limits HepcoMotion MHD Heavy Duty Track Roller Guidance System product overview The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationASSEMBLY SYSTEMS. Assembly systems. 387
Assembly systems Assembly systems ASSEMBLY SYSTEMS Series Size Page Assembly systems Pillar profile modular system Pillars Ø 20 mm 390 Pillars Ø 35 mm 394 Pillars Ø 55 mm 398 www.schunk.com 387 Assembly
More informationOverview. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Bosch Rexroth Corp.
881 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Caps and Finishing Elements Overview The wide variety of caps, end pieces, and T-slot covers helps you improve safety,
More informationConveyor track made of section profiles and roller elements
-4 MGE 1. Elements for manual movement Conveyor track made of section profiles and roller elements Economical solution for manual slide sections Roller elements can e clipped in Accessories: Roller elements
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationSPN II Pneumatic Actuator
SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has an epoxy coated, hard anodized aluminum body and epoxy coated end caps Inside surface finish (Ra 0.4-0.6µm) to minimize
More informationLINEAR MOTION SYSTEM COMPONENTS
R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.
More informationData sheet Compression fittings
Data sheet Compression fittings Regler- und Armaturen-Gesellschaft mbh & Co. KG Obernbreiter Straße 2-18 97340 Marktbreit / Germany Telefon: +49 9332 404-0 Telefax: +49 9332 404-49 E-Mail: info@gok-online.de
More informationActuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.
Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist
More informationC Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
More informationLM SERIES LINEAR MODULE
LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.
More informationEZ Tool Articulating Arm
EZ Tool Articulating Arm EZ tool arm features: Covers a 610 x 762 mm (24 x 30 inch) horizontal rectangular work envelope. Two piece arm with overall length from 864 to 1067 mm (34 to 42 inches). Anodized
More informationPrecise. Modular. Compact. CLM Compact Slides
CLM Precise. Modular. Compact. CLM Compact Slides Optimized length, with pneumatic drive and pre-loaded crossed roller bearings, free from play. Field of Application For use in assembly automation; e.g.
More informationServo solenoid valves with positive overlap Position feedback (Lvdt DC/DC ±10 V)
Servo solenoid valves with positive overlap Position feedback (Lvdt DC/DC ±10 V) RE 29087/01.05 1/22 Replaces: 05.04 Type 4WRL 10 35, symbols E. / W. Nominal size 10, 16, 25, 35 Unit series 3X Maximum
More informationProportional flow control valve, with inductive position transducer
Proportional flow control valve, with inductive position transducer RE 29220/08.05 1/16 Type 3FREZ Nominal size 6, 10 Unit series 1X Maximum working pressure 250 bar Nominal flow rate Q nom 2.6...80 l/min
More informationMotorized Vertical Linear Stages
50~160mm Table 50mm Table Timing Belt, Ground Screw, Aluminum Body, Cross-Roller Bearing 166 Ground Screw, Aluminum Body, Cross-Roller Bearing 17 70mm Table Timing Belt, Ball Screw, Aluminum Body, Cross-Roller
More informationI&M UT Series (2003 Design)
I&M UT Series (2003 Design) 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-7340 ax 513-533-7343 E-Mail: marwin@richardsind.com www.marwinvalve.com Installation & Maintenance Instructions for Marwin
More informationPANZONE Overhead Distribution Racks
PANZONE Overhead Distribution Racks Part Numbers: PZLRB, PZLRB4, PZLRB6 Panduit Corp. 007 INSTALLATION INSTRUCTIONS CM358 PZLRB6 PZLRB4 PZLRB Included components: Component Quantity Part Number Packs of
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationModular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
More informationDryLin W Guiding system
DryLin W Guiding system Introduction Your choice of length and width DryLin W is a low cost linear guiding system that was developed to provide both design flexibility and quick assembly in both single
More informationProportional pressure relief valve, directly operated, without/with integrated electronics (OBE)
Proportional pressure relief valve, directly operated, without/with integrated electronics (OBE) ype DBE and DBEE RE 96 Edition: 03-06 Replaces: 04.3 Size 6 Component series 6X Maximum operating pressure
More information