A Fluid Power PNEUMATICS TRAINING SYSTEMS SERIES 6081

Transcription

1 A Fluid Power PNEUMATICS TRAINING SYSTEMS GENERAL DESCRIPTION The Lab-Volt Pneumatics Training System, Model 6081, is a modular program in pneumatics and its applications. The system is divided into five subsystems: Pneumatics Fundamentals, Electrical Control of Pneumatic Systems, Pneumatics Applications PLC (programmable logic controller), Servo Control of Pneumatic Systems, Troubleshooting Pneumatic Circuits, and Sensors. In Pneumatics Fundamentals, the students are introduced to the basic principles and components of pneumatics. (This module is also available in a computerbased learning format with electronic grading.) Electrical Control of Pneumatic Systems covers electrical control of pneumatic systems with ladder diagrams. Pneumatics Applications PLC expands upon the others with pneumatics applications controlled by PLC. In Servo Control of Pneumatic Systems, students are introduced to servocontrolled pneumatic systems and their associated circuitry. In Troubleshooting Pneumatic Circuits, students develop their skills in troubleshooting. In Sensors, students are introduced to the operating characteristics of six types of photoelectric and proximity sensors. Most of the components used for electrical control of the Lab-Volt Pneumatics Training System can also be used with the Lab-Volt Hydraulics Training System, Model 6080, allowing interconnection of both systems to perform more complete functions. (732) / 800-LAB-VOLT, FAX: (732) , us@labvolt.com (418) / 800-LAB-VOLT, FAX: (418) , ca@labvolt.com INTERNET:

2 PNEUMATICS TRAINING SYSTEMS Innovative design Engineered for ease of use and quick circuit changes, the basic system comes with a work surface assembly consisting of a solid metal, universal drip-tray hinged to a perforated, tiltable work surface on which pneumatic components can be mounted. The work surface can be configured to accommodate a wide variety of space and teaching needs. Lying flat over the drip tray or tilted at 45E, the work surface provides a large area on which pneumatic components and space-expanding work surfaces can be mounted at any location, either at 0E or 90E. Mounting and removal of components are especially easy with push-lock fasteners that snap effortlessly into the perforations of the work surface. Although the system is designed to operate atop a regular work table, an optional bench is available to provide mobility and storage space. Mounted on four heavyduty, swivelling, lockable castors, the bench provides shelving for extra work surfaces and components. Optional dressing panels are also available to fully enclose the bench and provide storage area for components. The work surfaces may also be linked together for more complete electro-pneumatic/hydraulic circuits. By utilizing the optional work surfaces, exercise setups can be saved. Two student groups can simultaneously work on a bench when the Work Surface (Dual A-Frame), Model , is used. All components meet industrial safety standards, are identified with the proper ANSI symbols on their base, and are equipped with quick-connect fittings. Virtual Laboratory Equipment All components contained in Pneumatics Fundamentals and Electrical Control of Pneumatic Systems can be simulated by the Windows -based Lab-Volt Pneumatics Simulation Software (LVSIM -PNEU), Model The simulated components can be interconnected and their operation studied, using the same courseware as that used for the real equipment. Refer to the datasheet 6485 for more details. Courseware The Pneumatics courseware consists of student manuals and instructor guides. Student manuals are divided into several units, each consisting of a series of hands-on exercises dealing with one of the pneumatic fields. Each exercise provides a clearly stated objective, a discussion, a summary of the exercise procedure, a detailed exercise procedure, a conclusion, and a set of review questions. A ten-question test at the end of each unit allows the student to verify what was learned in the unit. Refer to the Topic Coverage section of this datasheet for a list of the topics covered in the student manuals. The instructor guides contain the measurement results as well as the answers for each hands-on exercise of the student manuals, and the answers to the unit test questions. The Pneumatics courseware also includes a reference textbook, optional instructional DVDs, and courseware figures. These figures are available in the form of transparencies and on CD-ROM. Furthermore, all student manuals and instructor guides are available, as an option, in Job Sheet format. The computer-based version of the Pneumatics Fundamentals module enables electronic grading of review questions and unit tests. This version also includes a 20 question pre- and post-test as well as rubric evaluations for some of the hands-on activities. For those who purchase the CBL version of this module, an Instructor Answer Key is provided. The CBL version requires the same hardware, or equivalent LVSIM, and supporting material (manual 31290) as the book course, as well as Lab-Volt electronic courseware delivery system. TABLE OF CONTENTS General Description... 1 Table of Contents of the Student Manuals... 3 Instructional DVD s Contents... 4 List of Equipment... 5 Optional Equipment... 8 Module Description... 9 Specifications Ordering Numbers

3 TABLE OF CONTENTS OF THE STUDENT MANUALS Pneumatics Fundamentals ( ) C Introduction to Pneumatics Familiarization with the Lab-Volt Pneumatics Trainer Introduction to Pneumatics Air Conditioning and Distributing Equipment C Basic Physical Concepts Pressure vs Force Relationship Pressure vs Volume Relationship Pressure Drop vs Flow Relationship Vacuum Generation C Basic Controls of Cylinders Directional Control Valves Directional and Speed Control of Cylinders Cylinders in Series Cylinders in Parallel C Basic Controls of Pneumatic Motors Indirect Control Using Pilot-Operated Valves Pneumatic Motor Circuits Pneumatic Motor Performance Electrical Control of Pneumatic Systems ( ) C Introduction to Electrical Control of Pneumatic Systems Familiarization with the Equipment C Electrical Concepts Basic Electricity Ladder Diagrams Basic Electrically Controlled Pneumatic System Basic AND and OR Logic Function Circuits C Functional Systems Basic memory and Priority Electropneumatic Circuits Multi-Pressure Systems Sequencing Pneumatic Circuits Time-Delay Electropneumatic Applications C Industrial Applications Pneumatic Actuator Deceleration Circuits Counting of Actuator Cycles Industrial Drilling System and Safety Circuits Garbage Compactor Simulation Circuit 3

4 PNEUMATICS TRAINING SYSTEMS TABLE OF CONTENTS OF THE STUDENT MANUALS (cont'd) C Troubleshooting Troubleshooting Electrical Control Circuits Troubleshooting Electrically Controlled Pneumatic Systems Pneumatics Applications PLC ( ) Programmable Logic Controller Review Timer Instructions Counter Instructions Latching and Comparison Instructions Time-Delay Control of Pneumatic Actuators Counting of Pneumatic Actuator Cycles Safety Control of Pneumatic Actuators PLC-Controlled Clamp and Work System Troubleshooting Designing a PLC-Controlled Stamping Machine Designing a PLC-Controlled Conveyor System Designing a PLC-Controlled Injection Molding Machine Servo Control of Pneumatic Systems ( ) Introduction to Servo Control Valves Acceleration and Deceleration Control Open-Loop Position Control Closed-Loop Position Control, Proportional Mode Closed-Loop Position Control. Proportional-Plus- Integral Mode Open-Loop Speed Control Closed-Loop Speed Control, Proportional-Plus- Integral-Plus-Derivative Mode Closed-Loop Pressure Control, Proportional-Plus- Integral Mode Sensors ( ) Introduction to Sensors Diffuse Reflective Photoelectric Switches Background Suppression Photoelectric Switches Fiber-Optic Photoelectric Switches Polarized Retroflective Photoelectric Switches Capacitive Proximity Switches Inductive Proximity Switches INSTRUCTIONAL DVD s CONTENTS Introduction to Fluid Power Provides a balanced and concise overview of fluid power. Offers definitions, principles, and current uses. Covers fluids, hydraulic, and pneumatic systems. Fluid Power Technology at Work Provides a broad overview of hydraulics and pneumatics applications. Covers fluid power in transportation, aviation, machining, manufacturing, mining, energy, and chemical processing industries. Actuators Explains the construction and operation of the many types of actuators used in the industry. Cylinders, motors, rotators, grippers, pushers, lifters, rubbers, and bellows are all detailed. Pumps, Lines, Filters Demonstrates the operation of the various types of pumps found in the industry through computer animation and live-action video. Filters, hoses, and lines are also explained. Control Mechanisms Summarizes the many ways to control fluid power systems. The construction and operation of pilot valves, solenoid valves, sensors, PLCs, and other devices are clearly explained. 4

5 LIST OF EQUIPMENT PNEUMATICS FUNDAMENTALS, MODEL QTY DESCRIPTION ORDERING NUMBER 2 1 Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Valve, Push-Button Operated Flow Control Valve Directional Valve, Double-Air-Pilot Operated Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing Set Long Line Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology, Bulletin 0275-B1 by Parker Hannifin Corporation (Textbook) PNEUMATICS FUNDAMENTALS (ADD-ON), MODEL Same as without the Work Surface Model PNEUMATICS FUNDAMENTALS (WITH BENCH), MODEL 6081-A QTY DESCRIPTION ORDERING NUMBER 2 1 Pneumatics Fundamentals Bench (Unassembled) Storage / Work Surface PNEUMATICS FUNDAMENTALS (WITH LOCKABLE BENCH), MODEL 6081-B QTY DESCRIPTION ORDERING NUMBER 2 1 Pneumatics Fundamentals Bench (Unassembled) Dressing Panels with Lockable Front Doors A0 2 Storage / Work Surface Air compressor is not supplied with the system. Refer to the specifications of the Conditioning Unit model 6411 in the Specifications table of this datasheet for more information about compressed air supply requirements. All components of this system can be simulated by the Lab-Volt LVSIM -PNEU simulation software. Refer to Datasheet for Model The model numbers shown apply to the English 120-V version. Other versions are available. Refer to the Ordering Numbers section. 5

6 PNEUMATICS TRAINING SYSTEMS PNEUMATICS FUNDAMENTALS (WITH ASSEMBLED LOCKABLE BENCH), MODEL 6081-C QTY DESCRIPTION ORDERING NUMBER 2 1 Pneumatics Fundamentals Assembled Bench (with Dressing Panels and Lockable Front Doors) C0 2 Storage/Work Surface PNEUMATICS FUNDAMENTALS A-TYPE (WITH LOCKABLE BENCH), MODEL 6081-D QTY DESCRIPTION ORDERING NUMBER 2 1 Pneumatics Fundamentals (Add-On) Work Surface (Dual A-Frame) Unassembled Bench (with Dressing Panels and Lockable Front / Rear Doors) E0 2 Storage/Work Surface PNEUMATICS FUNDAMENTALS A-TYPE (WITH ASSEMBLED LOCKABLE BENCH), MODEL 6081-E QTY DESCRIPTION ORDERING NUMBER 2 1 Pneumatics Fundamentals (Add-On) Work Surface (Dual A-Frame) Assembled Bench (with Dressing Panels and Lockable Front / Rear Doors) D0 2 Storage/Work Surface TROUBLESHOOTING PNEUMATIC CIRCUITS, MODEL 6081-F (ADD-ON TO MODEL ) QTY DESCRIPTION ORDERING NUMBER 2 1 Conditioning Unit F0 1 Accumulator F0 1 Vacuum Generator F0 1 Directional Valve, Push-Button Operated F0 1 Directional Valve, Double Air-Pilot Operated F0 1 Loading Device F0 1 Tees F0 1 Long Line F0 1 Instructor Guide ELECTRICAL CONTROL OF PNEUMATIC SYSTEMS, MODEL QTY DESCRIPTION ORDERING NUMBER 2 1 Expanding Work Surface (Large) DC Power Supply Push-Button Station Limit-Switch Assembly Relay Time-Delay Relay / Counter Pilot-Lamp Station Magnetic Proximity Switch Diffuse Reflective Photoelectric Switch Directional Valve, Double-Solenoid Operated Directional Valve, Single-Solenoid Operated AND Function Valve Shuttle Valve All components of this system can be simulated by the Lab-Volt LVSIM -PNEU simulation software. Refer to Datasheet for Model

7 ELECTRICAL CONTROL OF PNEUMATIC SYSTEMS, MODEL (cont d) QTY DESCRIPTION ORDERING NUMBER 2 1 Quick Exhaust Valve Pressure Regulator Pressure Switch Tees Connection Leads A0 1 Electrical Control of Pneumatic Systems (Student Manual) SERVO CONTROL OF PNEUMATIC SYSTEMS, MODEL QTY DESCRIPTION ORDERING NUMBER 2 1 Signal Conditioners PID Controller Position Transducer Servo Control Valve Proportional Control Valve, Air-Pilot Operated Pressure Transducer Servo Control of Pneumatic Systems (Student Manual) PNEUMATICS APPLICATIONS PLC, MODEL QTY DESCRIPTION ORDERING NUMBER 2 1 Programmable Logic Controller Software (Rockwell Software) A0 1 PC Interface (Allen Bradley) Programmable Logic Controller (Allen Bradley) Pneumatics Applications PLC (Student Manual) PNEUMATICS APPLICATIONS PLC, MODEL QTY DESCRIPTION ORDERING NUMBER 2 1 Programmable Logic Controller Software (Omron) PC Interface (Omron) Programmable Logic Controller (Omron) Pneumatics Applications PLC (Student Manual) PNEUMATICS APPLICATIONS PLC, MODEL QTY DESCRIPTION ORDERING NUMBER 2 1 Programmable Logic Controller Software (Siemens) PC Interface (Siemens) Programmable Logic Controller (Siemens) Pneumatics Applications PLC (Student Manual)

8 PNEUMATICS TRAINING SYSTEMS SENSORS, MODEL QTY DESCRIPTION ORDERING NUMBER 2 1 Background Suppression Photoelectric Switch Polarized Retroflective Photoelectric Switch Inductive Proximity Switch Capacitive Proximity Switch Diffuse Reflective Photoelectric Switch Fiber-Optic Photoelectric Switch Reflective Block Sensors (Student Manual) Sensors (Instructor Guide) OPTIONAL EQUIPMENT DESCRIPTION ORDERING NUMBER 2 Work Surface (Dual A-Frame) Expanding Work Surface (Large) Expanding Work Surface (Small) Bench (Unassembled) Dressing Panels with Lockable Front Doors A0 Assembled Bench (without Panels) B0 Assembled Bench (with Dressing Panels and Lockable Front Doors) C0 Assembled Bench (with Dressing Panels and Lockable Front / Rear Doors) D0 Unassembled Bench (with Dressing Panels and Lockable Front / Rear Doors) E0 Storage/Work Surface Multimeter Air Compressor B0 Instructional DVD 8 Introduction to Fluid Power (19 min) Instructional DVD Fluid Power Technology at Work (24 min) Instructional DVD Pumps, Lines, Filters (29 min) Instructional DVD Control Mechanisms (27 min) Instructional DVD Actuators (23 min) Courseware figures on transparencies Pneumatics Fundamentals M0 Courseware figures on transparencies Electrical Control of Pneumatic Systems M0 Courseware figures on transparencies Pneumatics Applications PLC M0 Courseware figures on transparencies Servo Control of Pneumatic Systems M0 Courseware figures on transparencies Sensors M0 Courseware figures on CD-ROM (all subsystems) M0 Manuals in Job Sheet format Pneumatics Fundamentals (includes to 39903) Manuals in Job Sheet format Electrical Control of Pneumatic Systems (includes to 39908) Manuals in Job Sheet format Pneumatics Applications PLC (includes 39909) Manuals in Job Sheet format Servo Control of Pneumatic Systems (includes 39910) Manuals in Job Sheet format Sensors (includes 39911) Manuals on CD-ROM includes , , , , A0 Manuals on CD-ROM includes 31290, 31300, 31726, 31977, 32606, A0 Computer-Based Learning (CBL) Pneumatics Fundamentals Refer to Datasheet for Model

9 OPTIONAL EQUIPMENT REQUIRED TO PERFORM THE EXERCISES Digital Tachometer Stopwatch Gloves MODULE DESCRIPTION Model 6301 Work Surface The Dual A-Frame Work Surface consists of two sloping work surfaces joined at the top and braced at their base by a universal drip tray. It allows two groups of students to connect separate pneumatic circuits. It can be placed atop a regular work table or on an optional bench, such as the Model 6303-D, which provides mobility and separate storage of the components used by each group of students. Model 6302 Expanding Work Surface (Large) The Work Surface consists in a solid metal, universal drip-tray hinged to a perforated, tiltable work surface on which components can be mounted. The Work Surface can be placed atop a regular work table or on an optional bench to provide mobility and storage space. Model Work Surface (Dual A-Frame) The Large Expanding Work Surface consists in a perforated plate that can be mounted on the main Work Surface to increase the work area. The Large Expanding Work Surface is two-thirds the main Work Surface in area. Model Expanding Work Surface (Small) The Small Expanding Work Surface consists in a perforated plate that can be mounted on the main Work Surface, Model 6301, to increase the work area. The Small Expanding Work Surface is one-third the main Work Surface in area. 9

10 PNEUMATICS TRAINING SYSTEMS Model Bench (Unassembled) Model 6303-B Assembled Bench (without Panels) Model 6303-A Dressing Panels with Lockable Front Doors The Dressing Panels are used to fully enclose the benches, Models and 6303-B. The Lockable Front Doors consist of two hinged panels with a lock handle to secure the contents of the bench. Also provided is a pair of lockable side doors to secure the components stored on the side shelves. The Bench consists in a mobile workstation on which the Work Surface, Model 6301, can be put. Four heavy-duty, swivelling, lockable castors allow ease of movement of the Bench in the laboratory classroom. The Bench has three pairs of side supports over which three Storage/Work Surfaces, Model 6309, can be slid to provide shelving for component storage. Bench Model requires assembly; a diagram is provided to facilitate this task. Bench Model 6303-B comes already assembled. 10

11 Model 6303-C Assembled Bench (with Dressing Panels and Lockable Front Doors) Model 6303-D Assembled Bench (with Dressing Panels and Lockable Front / Rear Doors) Model 6303-E Unassembled Bench (with Dressing Panels and Lockable Front / Rear Doors) Model 6309 Storage/Work Surface The Storage/Work Surface consists in a perforated plate that can be slid into the benches to provide shelving for component storage. Up to 3 shelves can be fitted in the 6303 bench. Model 6360 DC Power Supply The Bench Model 6303-C comes already assembled with dressing panels and lockable front and side doors. The Bench Model 6303-D comes already assembled with lockable side doors, as well as lockable front and rear doors. The Bench, Model 6303-E, is similar to the Model 6303-D but is unassembled. The supports of the Storage/Work Surfaces in the Benches Model 6303-D and 6303-E allow separate storage of components to accommodate two student groups. The DC Power Supply converts the AC line voltage into a 24-V DC voltage that is used to power the electrical components of the training system. It is protected against short-circuits by an automatic current/limit foldback circuit. 11

12 PNEUMATICS TRAINING SYSTEMS Model 6361 Push-Button Station Model 6363 Relay The Push-Button Station consists of two momentary push-button switches, one with normally open contact, and one with normally closed contact. Model 6362 Limit-Switch Assembly The Relay consists in a relay coil controlling three sets of normally open and normally closed contacts. Model 6364 Time-Delay Relay / Counter The Limit-Switch Assembly consists of two mechanical limit switches with roller arm actuator that are used to sense the position of the rod of the Cylinders, Models 6440 and Each switch has one normally open and one normally closed contact. The Time-Delay Relay / Counter consists in a programmable relay that can be programmed for either timing or counting function. The relay has two sets of normally open and normally closed contacts. 12

13 Model 6365 Pilot-Lamp Station Model 6367 PID Controller The Pilot-Lamp Station consists of two amber incandescent pilot lamps. Model 6366 Signal Conditioners The PID Controller consists of various controls and circuits that allow open- and closed-loop control of an actuator speed, position, or pressure, using the Servo Control Valve, Model 6429, and/or Proportional Control Valve, Model The PID Controller circuits include a setpoint generator, a ramp generator, an error detector, a lowpass filter, proportional (P), integral (I), and derivative (D) amplifiers, a summing amplifier, and a limiter circuit. Each circuit is independently terminated to permit students to study each block independently or to wire the PID controller in different configurations. Model 6371 Magnetic Proximity Switch The Signal Conditioners module consists of a voltage converter with adjustable outputs, a voltage converter with fixed-calibration outputs, and a frequency-to-voltage converter with adjustable and fixed-calibration outputs. The Signal Conditioners is used to convert the signals provided by the Pressure Transducer, Model 6471, the Position Transducer, Model 6395, and the Diffuse Reflective Photoelectric Switch, Model 6372, into signals of normalized range that are suitable for transmission to a controller. The Magnetic Proximity Switch consists of two mechanical reeds and an internal coil controlling a normally open and a normally closed contact. It is intended for use with the Cylinders, Models 6440 and 6441, to sense the position of their rod. 13

14 PNEUMATICS TRAINING SYSTEMS Model 6372 Diffuse Reflective Photoelectric Switch Model 6395 Position Transducer The Diffuse Reflective Photoelectric Switch consists of a visible light source and a receiver combined in the same casing. This switch has one normally open and one normally closed contact. It is intended for use with the Cylinders, Models 6440 and 6441, to sense the position of their rod, or with the Bidirectional Motor, Model 6442, to count the number of revolutions. Model 6394 Multimeter The Position Transducer provides a voltage corresponding to the position of a cylinder rod. It consists of a flexible cable wound on a cylindrical spool. The cable is ended by a pin that inserts into the hole in the tip of the Cylinders, Models 6440 and Model 6410-B Air Compressor The Air Compressor consists of motor(s), compressor(s), tank, pressure regulator, and pressure gauge. The discharge line of the Air Compressor is connected to an air conductor hose ended by a quick-connect fitting that plugs directly into the inlet port of the Conditioning Unit, Model The Multimeter consists in a digital meter with 3½-digit LED display that allows measurement of resistance, DC current, and AC/DC voltage. It is mounted on a base that clamps to the Work Surfaces. 14

15 Model 6411 Conditioning Unit Model 6413 Vacuum Generator The Conditioning Unit consists of a main shutoff valve, a filter, a pressure regulator, a filter, a pressure gauge, a 4-port manifold, four sleeve valves, and a muffler. It conditions and limits the pressure of the air supplied to the pneumatic circuits. The Conditioning Unit requires compressed air from a central air supply or a portable unit such as the optional Air Compressor, Model 6410-B. Model 6411-F is a modified version for the Troubleshooting Pneumatic Circuits system. Model 6412 Accumulator The Vacuum Generator consists in a venturi duct that temporarily restricts the area through which the circuit air must flow, thereby decreasing the air pressure below atmospheric pressure. This causes external air to be drawn in the Vacuum Generator by suction, through an air intake duct. Model 6413-F is a modified version for the Troubleshooting Pneumatic Circuits system. Model 6420 Directional Valve, Push-Button Operated The Accumulator consists in a one-liter (61-in 3 ) metal tank that is used to store pressurized air. It can provide a short-term air supply for actuation of the Cylinders, Models 6440 and Model 6412-F is a modified version for the Troubleshooting Pneumatic Circuits system. This valve consists in a three-way, two-position, pushbutton-operated, spring-return directional control valve. It allows control of the motion of the Cylinders, Models 6440 and 6441, and Bidirectional Motor, Model Model 6420-F is a modified version for the Troubleshooting Pneumatic Circuits system. 15

16 PNEUMATICS TRAINING SYSTEMS Model 6421 Flow Control Valve Model 6423 Directional Valve, Double-Solenoid Operated The Flow Control Valve consists of a needle valve and a reverse free-flow check valve connected in parallel. It restricts the flow rate in one direction, while allowing the air to flow freely in the other direction. Model 6422 Directional Valve, Double-Air-Pilot Operated This valve consists in a four-way, three-position, doublesolenoid operated, spring-centered, closed-center directional control valve. It allows control of the motion of the Cylinders, Models 6440 and 6441, and Bidirectional Motor, Model 6442, using electrical signals. Model 6424 Directional Valve, Single-Solenoid Operated This valve consists in a four-way, two-position, double airpilot operated directional control valve. It allows remote control of the motion of the Cylinders, Models 6440 and 6441, and Bidirectional Motor, Model 6442, using pneumatic signals. Model 6422-F is a modified version for the Troubleshooting Pneumatic Circuits system. This valve consists in a four-way, two-position, singlesolenoid operated, spring-return directional control valve. It allows control of the motion of the Cylinders, Models 6440 and 6441, and Bidirectional Motor, Model 6442, using electrical signals. 16

17 Model 6425 AND Function Valve Model 6427 Quick Exhaust Valve This valve consists in a normally closed, three-way, twoposition, air-pilot operated directional control valve. The valve opens when air pressure is present at both its pilot port AND inlet port, according to the AND function in Boolean logic. Model 6426 Shuttle Valve The Quick Exhaust Valve consists of a three-way valve with a diaphragm that exhausts the valve outlet port directly to atmosphere when the pressure at this port becomes higher than that at the valve inlet port. Model 6428 Pressure Regulator The Pressure Regulator consists in a normally open valve that closes when the pressure at its outlet port exceeds the pressure set by the valve knob. The Shuttle Valve consists of a double check valve with two inlet ports and one outlet port. It applies the pressure at one of its inlet ports, whichever is greater, to its outlet port, according to the OR function in Boolean logic. 17

18 PNEUMATICS TRAINING SYSTEMS Model 6429 Servo Control Valve Model 6431 Directional Valve, Roller Lever Operated The Servo Control Valve provides control of the pressure in proportion to a control voltage. It consists of an inlet valve and an exhaust valve, a built-in electronic circuit, and a pressure transducer. The electronic circuit controls the opening of the inlet and exhaust valves in order for the Servo Control Valve output pressure to be proportional to the control voltage. The pressure transducer provides the electronic circuit with a feedback signal that corresponds to the actual valve output pressure, this signal being accessible for monitoring. The Directional Valve, Roller Lever Operated, consists of two three-way, two-position, roller lever actuated, directional control valves. The valves are actuated by the rod tip of the Cylinders, Models 6440 and The valves are normally non-passing at rest position. Model 6440 Single-Acting Cylinder Model 6430 Proportional Control Valve, Air-Pilot Operated This valve provides control of the flow rate in proportion to a pilot pressure. It consists in a three-way, two-position, single air-pilot operated, spring return directional control valve. It is intended to be used in conjunction with the Servo Control Valve, Model 6429, to permit proportional control of the speed of the Bidirectional Motor, Model The Single-Acting Cylinder provides a linear pushing motion over a 10.2-cm (4-in) stroke. Its rod is extended under pressurized air and retracted by a spring. The cylinder piston is equipped with a permanent ring magnet intended to actuate the Magnetic Proximity Switch, Model

19 Model 6441 Double-Acting Cylinder Model 6443 Air Bearing The Double-Acting Cylinder provides a linear push-pull motion over a 10.2-cm (4-in) stroke. Its rod is both extended and retracted under pressurized air. The cylinder piston is equipped with a permanent ring magnet intended to actuate the Magnetic Proximity Switch, Model Model 6442 Bidirectional Motor The Air Bearing consists of a disk with a side inlet duct leading to an underneath cavity. When pressurized air enters the side inlet duct, a thin film of escaping air is formed between the Air Bearing and the work surface, resulting in a friction-free movement in any direction. Model 6450 Pressure Gauge The Bidirectional Motor is a vane-type pneumatic motor that provides rotary motion in either direction. A white sticker affixed onto the motor shaft allows counting of the motor revolutions, using the Diffuse Reflective Photoelectric Switch, Model The Pressure Gauge provides a direct visual reading of the pressure on a dual scale graduated in units of kilopascals (kpa) and pounds per square inch (psi). It consists of a Bourdon tube attached through a gear linkage to a needle pointer. 19

20 PNEUMATICS TRAINING SYSTEMS Model 6451 Flowmeter Model 6471 Pressure Transducer The Flowmeter provides a direct visual reading of the air flow rate. It consists of a lightweight ball that moves vertically along a tapered tube with the flow of air, thereby indicating the flow rate. Model 6470 Pressure Switch The Pressure Transducer provides a voltage proportional to the pressure applied to its pressure port. It consists of a bridge of diffused resistors on a silicon sensing diaphragm. The applied pressure causes the diaphragm to deflect, which results in a change in the bridge resistance and in a proportional change in the transducer output voltage. Model 6480 Loading Device The Pressure Switch consists in a diaphragm electrical switch with adjustable actuation pressure and pressure differential. It has one normally open and one normally closed contact. The Loading Device consists of a spring enclosed in a clear plastic tube to which a Newton/lbf-graduated ruler can be clipped. The Loading Device is intended to be mounted to either of the Cylinders, Models 6440 and 6441, to measure the cylinder force output at different piston pressures. Model 6480-F is a modified version for the Troubleshooting Pneumatic Circuits system. 20

21 Model 6490 Tees Model Tubing Set The Tees assembly consists of six push-in tube fittings, interconnected into two groups of three, to which tubes can be connected. The Tees can be used to interconnect or split lines that carry compressed air. Model 6490-F is a modified version for the Troubleshooting Pneumatic Circuits system. Model 6491-A Connection Leads The Tubing Set consists in a 15-m (50-ft) length of polyethylene tubing to be cut into shorter segments for the connection of pneumatic circuits, using the provided tube cutter. To be connected to components, the tubes need only be pushed into the component fittings, as no collar or clamp is needed. Model 6492 Long Line The Connection Leads consist in extra-flexible electrical leads terminated with stacking banana plugs. They are supplied in four different lengths. The Long Line consists in a 11.5-m (38-ft) length of polyethylene coiled tubing having a smaller diameter than that of the tubes used to connect circuits, which is used to simulate the friction caused by a very long tubing line. Model 6492-F is a modified version for the Troubleshooting Pneumatic Circuits system. 21

22 PNEUMATICS TRAINING SYSTEMS SPECIFICATIONS Model Pneumatics Fundamentals Physical Characteristics Required Space (H x W x D) 1500 x 1800 x 1500 mm (60 x 72 x 60 in) Net Weight 29.4 kg (64.5 lb) Model Electrical Control of Pneumatic Systems Physical Characteristics Required Floor Space No additional floor space required Net Weight 14.8 kg (32.6 lb) Model Servo Control of Pneumatic Systems Physical Characteristics Required Floor Space No additional floor space required Net Weight 8.5 kg (18.7 lb) Model 6082 Hydraulics and Pneumatics Applications - PLC Physical Characteristics Required Floor Space No additional floor space required Model 6085 Sensors Training System Physical Characteristics Required Floor Space No additional floor space required Net Weight 3.8 kg (8.4 lb) Model 6301 Work Surface Physical Characteristics Dimensions (H x W x D) 80 x 900 x 700 mm (3 x 35.5 x 27.5 in) Net Weight 16.8 kg (36.6 lb) Model Work Surface (Dual A-Frame) Physical Characteristics Dimensions (H x W x D) 450 x 900 x 820 mm (21.3 x 35.5 x 32.3 in) Net Weight 23.6 kg (52 lb) Model 6302 Expanding Work Surface (Large) Physical Characteristics Dimensions (H x W x D) 30 x 590 x 590 mm (1 x 23 x 23 in) Net Weight 5.9 kg (12.8 lb) Model Expanding Work Surface (Small) Physical Characteristics Dimensions (H x W x D) 30 x 290 x 590 mm (1 x 11.5 x 23 in) Net Weight 3.2 kg (7.5 lb) Model Bench (Unassembled) Physical Characteristics Dimensions (H x W x D) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) Net Weight 37.3 kg (82.5 lb) Model 6303-A Dressing Panels with Lockable Front Doors Physical Characteristics Net Weight 25.5 kg (55.9 lb) Model 6303-B Assembled Bench (without Panels) Physical Characteristics Dimensions (H x W x D) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) Net Weight 37.3 kg (82.5 lb) Model 6303-C Assembled Bench (with Dressing Panels and Lockable Front Doors) Physical Characteristics Dimensions (H x W x D) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) Net Weight 64 kg (141 lb) Model 6303-D Assembled Bench (with Dressing Panels and Lockable Front / Rear Doors) Physical Characteristics Dimensions (H x W x D) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) Net Weight 64 kg (141 lb) Model 6309 Storage/Work Surface Physical Characteristics Dimensions (H x W x D) 30 x 590 x 590 mm (1 x 23 x 23 in) Net Weight 5 kg (11 lb) 22

23 SPECIFICATIONS (cont'd) Model 6360 DC Power Supply 120 V 60 Hz 220 V 50 Hz 240 V 50 Hz Power Requirement Current 1.25 A 0.75 A Output 24 V 2.4 A DC Short-Circuit Protection Automatic current/limit foldback Physical Characteristics Dimensions (H x W x D) 105 x 135 x 220 mm (4.1 x 5.3 x 8.7 in) Net Weight 3.6 kg (7.9 lb) Model 6361 Push-Button Station Push-Buttons Two, momentary Contacts NO, NC, 24 V 3 A DC Physical Characteristics Dimensions (H x W x D) 70 x 70 x 170 mm (2.8 x 2.8 x 6.7 in) Net Weight 0.4 kg (0.9 lb) Model 6362 Limit-Switch Assembly Switches Two, roller-lever actuated, momentary Contacts SPDT, 24 V 3 A DC Switch Positioning Range Switches can be positioned within 15 cm (6 in) of each other Physical Characteristics Dimensions (H x W x D) 70 x 150 x 160 mm (2.8 x 5.9 x 6.3 in) Net Weight 0.9 kg (2.0 lb) Model 6363 Relay Type General purpose, plug-in Coil Voltage 24 V DC Contacts 3PDT; 24 V 3 A DC Physical Characteristics Dimensions (H x W x D) 100 x 120 x 130 mm (3.9 x 4.7 x 5.1 in) Net Weight 0.9 kg (2.0 lb) Model 6364 Time-Delay Relay / Counter Type Programmable, multifunction, digital, LCD display Timing Range 0.1 s to 9990 h Counting Range 1 to Contacts DPDT; 24 V 3 A DC Physical Characteristics Dimensions (H x W x D) 100 x 120 x 135 mm (3.9 x 4.7 x 5.3 in) Net Weight 0.9 kg (2.0 lb) Model 6365 Pilot-Lamp Station Lamps Two, amber, incandescent, 24 V DC Physical Characteristics Dimensions (H x W x D) 70 x 70 x 170 mm (2.8 x 2.8 x 6.7 in) Net Weight 0.4 kg (0.9 lb) Model 6366 Signal Conditioners Power Requirement 24 V DC Rating (all Converters) Output Voltages 0-5 V and 0-10 V Output Impedance 1 kω Voltage Converter Input Voltage 0-5 V (with Adjustable Outputs) Input Impedance 1 MΩ Zero Adjustment Span Adjustment 0 to 2.2 V approx. 1.0 to 4.7 V approx. 23

24 PNEUMATICS TRAINING SYSTEMS SPECIFICATIONS (cont'd) Model 6366 Signal Conditioners (cont'd) Voltage Converter Input Voltage 0-24 V (with Fixed-Calibration Outputs) Input Impedance 150 kω Frequency Converter Input Frequency 2-33 Hz Fixed-Calibration Output 1 V/1000 r/min Span Adjustment Hz Physical Characteristics Dimensions (H x W x D) 115 x 135 x 220 mm (4.5 x 5.3 x 8.7 in) Net Weight 1.5 kg (3.1 lb) Model 6367 PID Controller 120 V 60 Hz 220 V 50 Hz 240 V 50 Hz Power Requirement Current 0.5 A TBE 5 Rating (all sections) Input Voltage -10 to +10 V Output Voltage -10 to +10 V Input Impedance 1 MΩ Output Impedance 1 kω Setpoints Two, selectable using either a control voltage (24 V DC) or a toggle switch Ramp Generator Ramp Time Adjustable between 0.5 and 3 s, for both positive and negative control voltages. Error Detector Inputs One inverted, two non-inverted Voltage Gain (for each input) One Low-Pass Filter Cutoff Frequency Hz P.I.D. Amplifiers Proportional Gain Low: 0.5-5, High: 5-50 approx. Integral Gain s approx. Derivative Gain s approx. Integrator Anti-Reset On/Off selector Summing Point Voltage Gain One Limiter Output Voltage Lower Limit 0 to -10 V Upper Limit 0 to +10 V Physical Characteristics Dimensions (H x W x D) 135 x 270 x 180 mm (5.3 x 10.6 x 7.1 in) Net Weight 4.0 kg (8.8 lb) Model 6371 Magnetic Proximity Switch Type Reed Supply Voltage 24 V DC Contact SPDT; 24 V 3 A DC Physical Characteristics Dimensions (H x W x D) 30 x 40 x 100 mm (1.2 x 1.6 x 3.9 in) Net Weight 0.2 kg (0.4 lb) Model 6372 Diffuse Reflective Photoelectric Switch Type Diffuse reflective Light Source Visible red, 680 nm, eye safe Maximum Sensing Range 10.2 cm (4 in) Supply Voltage 24 V DC Contact SPDT; 24 V 3 A DC Physical Characteristics Dimensions (H x W x D) 90 x 120 x 90 mm (3.5 x 4.7 x 3.5 in) Net Weight 0.4 kg (0.9 lb) 5 TBE = To be established 24

25 SPECIFICATIONS (cont'd) Model 6394 Multimeter Functions AC / DC voltage, DC current, resistance Accuracy ± 0.5% Display 3½ digit, liquid crystal Others Auto-polarity, overload protection, mounted on a base that clamps to the work surface using push-lock fasteners Physical Characteristics Dimensions (H x W x D) 40 x 75 x 170 mm (1.6 x 3.0 x 6.7 in) Net Weight 0.4 kg (0.9 lb) Model 6395 Position Transducer Type Cable extension spool Position Sensing Range mm (0-4 in) Output Voltage 0-24 V Supply Voltage 24 V DC Physical Characteristics Dimensions (H x W x D) 100 x 120 x 75 mm (3.9 x 4.7 x 3 in) Net Weight 0.7 kg (1.5 lb) Model 6410-B Air Compressor 120 V 60 Hz 220 V 50 Hz 240 V 50 Hz Type Low noise Power requirement 14.7 A 7.5 A Suggested electric circuit capacity 20 A 10 A Model 6411 Conditioning Unit Recommended Compressed Air Supply Flow Rate 90 L/min (3.2 SCFM) approx. Pressure 630 kpa (90 psi) approx. Filter Regulator Maximum Air Flow Rate 550 L/min (19 SCFM) Operating Pressure kpa (7-100 psi) Filtration 5 µm Pressure Gauge Diameter 50 mm (2 in) Operating Pressure kpa (0-100 psi) Outlet Ports Four Physical Characteristics Dimensions (H x W x D) 216 x 273 x 127 mm (8.5 x 10.7 x 5 in) Net Weight 2.8 kg (6.2 lb) Model 6412 Accumulator Volume 1000 cm 3 (61 in 3 ) Maximum Operating Pressure 700 kpa (100 psi) Physical Characteristics Dimensions (H x W x D) 102 x 305 x 127 mm (4.0 x 12 x 5.0 in) Net Weight 0.9 kg (2.0 lb) Model 6413 Vacuum Generator Vacuum Pressure 2130 mmh 2 O (84 inh 2 O) at 140-kPa (20-psi) inlet pressure Physical Characteristics Dimensions (H x W x D) 38 x 210 x 127 mm (1.5 x 8.3 x 5.0 in) Net Weight 0.5 kg (1.1 lb) Model 6420 Directional Valve, Push-Button Operated Type 3 ways, 2 positions, push-button operated, spring return Maximum Operating Pressure 1050 kpa (150 psi) Physical Characteristics Dimensions (H x W x D) 140 x 127 x 89 mm (5.5 x 5.0 x 3.5 in) Net Weight 0.5 kg (1.1 lb) 25

26 PNEUMATICS TRAINING SYSTEMS SPECIFICATIONS (cont'd) Model 6421 Flow Control Valve Minimum Operating Pressure 105 kpa (15 psi) Maximum Operating Pressure 700 kpa (100 psi) Physical Characteristics Dimensions (H x W x D) 89 x 127 x 76 mm (3.5 x 5.0 x 3.5 in) Net Weight 0.3 kg (0.7 lb) Model 6422 Directional Valve, Double-Air-Pilot Operated Type 4 ways, 2 positions, double air-pilot operated Operating Pressure kpa ( psi) Physical Characteristics Dimensions (H x W x D) 133 x 127 x 76 mm (5.2 x 5.0 x 3.5 in) Net Weight 0.5 kg (1.1 lb) Model 6423 Directional Valve, Double-Solenoid Operated Type 4 ways, 3 positions, double-solenoid operated, spring centered, closed center Solenoids 24 V DC Physical Characteristics Dimensions (H x W x D) 115 x 150 x 70 mm (4.5 x 5.9 x 2.8 in) Net Weight 0.7 kg (1.5 lb) Model 6424 Directional Valve, Single-Solenoid Operated Type 4 ways, 2 positions, single-solenoid operated, spring return Solenoids 24 V DC Physical Characteristics Dimensions (H x W x D) 115 x 150 x 70 mm (4.5 x 5.9 x 2.8 in) Net Weight 0.7 kg (1.5 lb) Model 6425 AND Function Valve Actuator Type Single acting, spring return, air pilot Actuating Pressure 210 kpa (30 psi) Maximum Operating Pressure 1050 kpa (150 psi) Physical Characteristics Dimensions (H x W x D) 68 x 120 x 70 mm (2.7 x 4.7 x 2.8 in) Net Weight 0.3 kg (0.7 lb) Model 6426 Shuttle Valve Operating Pressure kpa (7-150 psi) Physical Characteristics Dimensions (H x W x D) 48 x 120 x 90 mm (1.9 x 4.7 x 3.5 in) Net Weight 0.2 kg (0.4 lb) Model 6427 Quick Exhaust Valve Operating Pressure kpa (7-150 psi) Physical Characteristics Dimensions (H x W x D) 85 x 120 x 70 mm (3.3 x 4.7 x 2.8 in) Net Weight 0.3 kg (0.7 lb) Model 6428 Pressure Regulator Maximum Air Flow Rate 550 L/min (19 SCFM) Pressure Range kpa (7-100 psi) Physical Characteristics Dimensions (H x W x D) 115 x 120 x 70 mm (4.5 x 4.7 x 2.8 in) Net Weight 0.6 kg (1.3 lb) 26

27 SPECIFICATIONS (cont'd) Model 6429 Servo Control Valve Type Pressure Control Power Requirement 24 V 0.25 A DC Control Voltage 0-10 V or 0-5 V Output Pressure kpa (0-100 psi) Rated Flow 34 L/min (1.2 SCFM) at 700 kpa (100 psi) Pressure Transducer Monitoring Output 0-10 V Linearity/Hysteresis ± 0.15% Repeatability ± 0.02% Accuracy ± 0.2% Physical Characteristics Dimensions (H x W x D) 100 x 120 x 145 mm (3.9 x 4.7 x 5.7 in) Net Weight 1.3 kg (2.7 lb) Model 6430 Proportional Control Valve, Air-Pilot Operated Type 3 ways, 2 positions, single air-pilot operated, spring return Rated Flow 140 L/min (5 SCFM) at 700 kpa (100 psi) Physical Characteristics Dimensions (H x W x D) 60 x 70 x 170 mm (2.4 x 2.8 x 6.7 in) Net Weight 0.5 kg (1.1 lb) Model 6431 Directional Valve, Roller Lever Operated Type 3 ways, 2 positions, roller lever operated Maximum Operating Pressure 1050 kpa (150 psi) Physical Characteristics Dimensions (H x W x D) 70 x 50 x 160 mm (2.8 x 5.9 x 6.3 in) Net Weight 0.9 kg (2.0 lb) Model 6440 Single-Acting Cylinder Piston Spring return, with permanent ring magnet Stroke 100 mm (4 in) Bore Size 27 mm (1.1 in) Maximum Operating Pressure 1725 kpa (250 psi) Physical Characteristics Dimensions (H x W x D) 83 x 267 x 127 mm (3.3 x 10.5 x 5.0 in) Net Weight 0.9 kg (2.0 lb) Model 6441 Double-Acting Cylinder Piston With permanent ring magnet Stroke 100 mm (4 in) Bore Size 27 mm (1.1 in) Maximum Operating Pressure 1725 kpa (250 psi) Physical Characteristics Dimensions (H x W x D) 83 x 267 x 127 mm (3.3 x 10.5 x 5.0 in) Net Weight 0.9 kg (2.0 lb) Model 6442 Bidirectional Motor Type Vanes Ratings Maximum Power 250 W (0.33 hp) Maximum Operating Pressure 700 kpa (100 psi) Maximum Speed r/min Physical Characteristics Dimensions (H x W x D) 102 x 127 x 76 mm (4.0 x 5.0 x 3.0 in) Net Weight 1.0 kg (2.2 lb) 27

28 PNEUMATICS TRAINING SYSTEMS SPECIFICATIONS (cont'd) Model 6443 Air Bearing Diameter 63 mm (2.5 in) Physical Characteristics Dimensions (H x W x D) 38 x 89 x 64 mm (1.5 x 3.5 x 2.5 in) Net Weight 0.2 kg (0.4 lb) Model 6450 Pressure Gauge Diameter 38 mm (1.5 in) Operating Pressure kpa (0-100 psi) Physical Characteristics Dimensions (H x W x D) 83 x 127 x 76 mm (3.3 x 5.0 x 3.0 in) Net Weight 0.3 kg (0.7 lb) Model 6451 Flowmeter Flow Range L/min ( SCFM) Maximum Operating Pressure 700 kpa (100 psi) Accuracy ± 4% of full scale Physical Characteristics Dimensions (H x W x D) 159 x 127 x 76 mm (6.3 x 5.0 x 3.0 in) Net Weight 0.6 kg (1.3 lb) Model 6470 Pressure Switch Adjustable Pressure Range kpa ( psi) Differential Range kpa (10-30 psi) Contact SPDT; 24 V 3 A DC Physical Characteristics Dimensions (H x W x D) 115 x 120 x 140 mm (4.5 x 4.7 x 5.5 in) Net Weight 0.8 kg (1.8 lb) Model 6471 Pressure Transducer Type Solid state Pressure Range kpa (0-140 psi) Output Voltage 0-24 V Supply Voltage 24 V DC Physical Characteristics Dimensions (H x W x D) 100 x 120 x 75 mm (3.9 x 4.7 x 3 in) Net Weight 0.7 kg (1.5 lb) Model 6480 Loading Device Spring Compression Rate 98 N/cm (56 lbf/in) Force Measurement Ruler Designed to mount on the load device, graduated in N and lbf Maximum Compression Force 500 N (100 lbf) Physical Characteristics Dimensions (H x W x D) 51 x 178 x 51 mm (2.0 x 7.0 x 2.0 in) Net Weight 0.3 kg (0.7 lb) Model 6490 Tees Number of Tee Assemblies Two Maximum Operating Pressure 1050 kpa (150 psi) Physical Characteristics Dimensions (H x W x D) 76 x 127 x 89 mm (3.0 x 5.0 x 3.5 in) Net Weight 0.5 kg (1.1 lb) Model Tubing Set Tubing Type Polyethylene, 6-mm (0.25-in) outside diameter, 15-m (50-ft) long Maximum Operating Pressure 700 kpa (100 psi) Tube Cutter For tubing with outside diameter between 6 and 12 mm (0.25 and 0.5 in) Physical Characteristics Net Weight 0.4 kg (0.9 lb) 28

29 SPECIFICATIONS (cont'd) Model 6491-A Connection Leads Electrical Leads Quantity, Length Eight, 15 cm (6 in); Eight, 30 cm (12 in); Ten, 45 cm (18 in); Ten, 60 cm (24 in) Connectors 2-mm banana plugs Current Rating 10 A Physical Characteristics Net Weight 0.2 kg (0.4 lb) Model 6492 Long Line Tubing Type Polyethylene, 3-mm (0.13-in) outside diameter, 11.5-m (38-ft) long Maximum Operating Pressure 700 kpa (100 psi) Physical Characteristics Dimensions (H x W x D) 235 x 127 x 127 mm (9.3 x 5.0 x 5.0 in) Net Weight 1.0 kg (2.2 lb) ORDERING NUMBERS 120 V 60 Hz 220 V 50 Hz 240 V 50 Hz ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH A A A A A A A A A 6081-A A A A A A A B B B B B B B C C C C C C C D D D D D D D E E E E E E E F0 TBE TBE 6081-F0 TBE TBE 6081-F A A A A A A A A A A B B B B B B B C C C C C C C D D D D D D D E E E E E E E A Table 1. Equipment Ordering Numbers. 29

30 PNEUMATICS TRAINING SYSTEMS ORDERING NUMBERS (cont'd) 120 V 60 Hz 220 V 50 Hz 240 V 50 Hz ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH A B B B B B B BA F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F N/A 6 N/A N/A N/A F F F F F F F A A A A A A A F F F F F F F Table 1. Equipment Ordering Numbers (cont'd). 6 N/A = Not available at time of printing 30

31 ORDERING NUMBERS (cont'd) 120 V 60 Hz 220 V 50 Hz 240 V 50 Hz ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH N/A N/A N/A N/A A A A A A A A M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M N/A 7 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A A0 N/A N/A A0 N/A N/A A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Table 1. Equipment Ordering Numbers (cont'd). 7 N/A = Not available at time of printing 31

32 PNEUMATICS TRAINING SYSTEMS Reflecting Lab-Volt's commitment to high quality standards in product, design, development, production, installation and service, our manufacturing and distribution facility has received the ISO 9001 certification. Lab-Volt reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Lab-Volt recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Lab-Volt All rights reserved Rev. A3