GL-6 SERIES. Miniature Inductive Proximity Sensor. High Performance in Surprisingly Small Body. Marked. Extremely Small.

Transcription

1 G- SERIES Miniature Inductive Proximity Sensor High Performance in Surprisingly Small Body Marked Conforming to EMC Directive Extremely Small Mountable in a tight space as the sensor is just 19mm in volume. It is optimum for use as a component in an equipment. ow Price The G- is available at a surprisingly low price. Operation Indicator Despite its compactness, G- incorporates an operation indicator for operation check. mm mm 19mm Operation indicator (Orange) Close Mounting Two sensors can be mounted closely because different frequency type are available. G-H (Standard) G-HI (Different frequency) 454

2 G- PPICTIONS Observing table over-run Sensing cam positions ORDER GUIDE Type ppearance (mm) Sensing range (Note 1) Model No. (Note ) Output operation Front sensing 19 1.mm Maximum operation distance G-F G-FI G-FB G-FIB Normally closed Top sensing 19 (0 to 1.mm) Stable sensing range G-H G-HI G-HB G-HIB Normally closed Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. Notes: 1) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. Notes: ) I in the model No. indicates a different frequency type. OPTION Designation Model No. Description Sensor mounting bracket Sensor mounting bracket MS-G- The brackets are useful to mount sensors side by side. Screw, nut or washer are not supplied. 455

3 G- SPECIFICTIONS Item Max. operation distance (Note) Stable sensing range (Note) Standard sensing object Hysteresis Supply voltage Current consumption Output Type Model No. Utilization category Output operation Max. response frequency Operation indicator Pollution degree Protection mbient temperature mbient humidity EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Sensing range Temperature characteristics variation Voltage characteristics Material Cable Cable extension Weight ccessory Environmental resistance Different frequency Front sensing Different frequency Miniature G-F G-FI G-FB G-FIB G-H G-HI G-HB G-HIB 1.mm15% 0 to 1.mm Iron sheet 11t1mm 15% or less of operation distance 10 1 to 4V DC 15 % Ripple P-P10% or less 15m or less NPN open-collector transistor Maximum sink current: 50m pplied voltage: 0V DC or less (between output and 0V) Residual voltage: 1V or less (at 50m sink current) 0.4V or less (at 1m sink current) DC-1 or DC-1 Normally closed Normally closed 400Hz Orange ED (lights up when the output is ON) (Industrial environment) IP7 (IEC), IP7g (JEM) 10 to55c, Storage:0 to80c 45 to 85% RH, Storage: 5 to 95% RH Emission: EN50081-, Immunity: EN5008-1,000V C for one min. between all supply terminals connected together and enclosure 50MΩ, or more, with 50V DC megger between all supply terminals connected together and enclosure 10 to 55Hz frequency, 1.5mm amplitude in X, Y and Z directions for two hours each 1,000m/s acceleration (100G approx.) in X, Y and Z directions for three times each Over ambient temperature range10 to55c: within10% of sensing range at 0C Within% for10% fluctuation of the supply voltage Enclosure: Polyalylate 0.08mm -core oil, heat and cold resistant cabtyre cable, 1m long Extension up to total 100m is possible with 0.mm, or more, cable. 10g approx. MS-G-1 (Sensor mounting bracket): 1 No. Different frequency Top sensing Different frequency Note: The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. Note: The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. I/O CIRCUIT ND WIRING DIGRMS I/O circuit diagram Wiring diagram Color code Brown Sensor circuit D ZD Tr (Brown)V (Black) Output 50m max. (Blue) 0V 1 to 4V DC % Black Blue 1 to 4V DC % Internal circuit Users circuit Symbols... D: Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor 45

4 G- SENSING CHRCTERISTICS (TYPIC) Sensing field Setting distance (mm) Standard sensing object Iron sheet 11t1mm 0.5 # Front sensing Standard sensing object Iron sheet 11t1mm # Top sensing eft Center Right Operating point? (mm) PRECUTIONS FOR PROPER USE Correlation between sensing object size and sensing range Sensing range (mm) Iron Stainless (SUS04) Brass luminum Sensing object Sensing object aamm aamm t1mm t1mm Front sensing Top sensing Sensing object side length a (mm) s the sensing object size becomes smaller than the standard size (iron sheet 11t1mm), the sensing range shortens as shown in the left figure. This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. Mounting Mount the sensor with the attached sensor mounting bracket MS-G-1 or the optional sensor mounting bracket MS-G-. Screws, nuts or washers are 1.mm not supplied. Please arrange them separately. To mount the sensor with a nut, the hole diameter should be ".4 mm. M pan head screws or truss head screws MS-G-1 (ccessory) M0.5mm tapped hole or ".4mm hole If mounting using nut and washers (ccessories) Influence of surrounding metal When there is a metal near the sensor, keep the minimum separation distance specified below. G-F (Unit: mm) G-H (Unit: mm) 8 Wiring The output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. DIMENSIONS (Unit: mm) 10 Mutual interference When two or more sensors are installed in parallel or face to face, keep the minimum separation distance specified below to avoid mutual interference. G-F, G-H G-F G-H B Between I type and non I type 0mm (Note ) 15mm Notes: 1) I in the model No. specifies the different frequency type. Notes: ) Close mounting is possible for up to two sensors. When mounting three sensors or more, at an equal spacing, in a row, the minimum value of dimension should be.5mm. Sensing range The sensing range is specified for the standard sensing object (iron sheet 11t1mm). With a non-ferrous metal, the sensing range is obtained by multiplying with the correction coefficient specified on the Between two I types or two non I types 1mm 5mm Correction coefficient Model No. right. Further, the sensing range also changes if the sensing object is smaller than the standard sensing object (iron sheet 11t1mm) or if the sensing object is plated. Others Do not use during the initial transient time (50ms) after the power supply is switched on. B G-F G-H Iron 1 Stainless steel (SUS04) 0.7 approx. Brass 0.55 approx. luminum 0.5 approx. B G-F Sensor G-H Sensor Operation indicator (Orange) 0.5 Sensing direction ". cable 1m long 1.5 "4. Sensing direction Operation indicator (Orange) ". cable 1m long "4. MS-G-1 Sensor mounting bracket (ccessory) MS-G- Sensor mounting bracket (Optional). 5. t (Note) Note: 0mm with the sensor fitted oblong holes 5.5 Mounting hole dimensions 1. -M0.5 tapped holes (or -".4 holes) t (Note) Note: 1.4mm with the sensor fitted. Mounting hole dimensions..8 oblong hole ".4 hole M0.5 tapped hole (or".4 hole)

5 G-8U SERIES ow Price DC -wire & Compact Inductive Proximity Sensor Energy-saving Wire-saving Marked Conforming to EMC Directive ow Price The G-8U series satisfies the need for a low price inductive proximity sensor. It is recommended to large volume users for cost reduction. The G-8U series is available in units of ten sensors. Current Consumption Reduced by 95% pprox. The current consumption is 0.8m or less, which realizes an energy-saving of 95% approx., as compared to a DC -wire sensor. Being an energy-saving sensor, it is environment friendly. Comparison of SUNX products 15m 95% approx. down Wiring Operations Reduced by 0% approx. The DC -wire sensor reduces wiring operations by 0% approx. as compared to the DC -wire sensor. Moreover, chances of miswiring are also decreased. In case 100 Nos. are wired 0% approx. down 00 Nos. 00 Nos. 0.8m DC -wire DC -wire DC -wire DC -wire Wide Variety wide variety of 8 types, front sensing type/top sensing type, normally open type/normally closed type, as well as, different frequency type which allows close mounting of sensors, is available. Equipped with Operation Indicator The G-8U series is equipped with an operation indicator (orange) for operation confirmation. Waterproof Since the sensor has IP7 protection, it can withstand water splashes. Front sensing type Operation indicator (Orange) Top sensing type 458

6 G-8U PPICTIONS Detecting table over-run Detecting cam position ORDER GUIDE Type ppearance (mm) Sensing range (Note 1) Model No. (Note ) Output Output operation Front sensing Top sensing Maximum operation distance.5mm (0 to 1.8mm) Stable sensing range G-8FU10 G-8FUI10 G-8FUB10 G-8FUIB10 G-8HU10 G-8HUI10 G-8HUB10 G-8HUIB10 Non-contact DC -wire type Normally closed Normally closed Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. Notes: 1) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. Notes: ) I in the model No. indicates a different frequency type. NOTE: ow price DC -wire & compact inductive proximity sensors (G-8U series) are available in units of ten. OPTION Designation Model No. Sensor mounting bracket Sensor mounting bracket MS-G810 NOTE: Sensor mounting bracket (MS-G810) is available in units of ten. 1 No. each of M (length 1mm) truss head screw, nut, spring washer and plain washer is attached. 459

7 G-8U SPECIFICTIONS Type Item Model No. Max. operation distance (Note 1) Stable sensing range (Note 1) Standard sensing object Hysteresis Supply voltage Current consumption (Note ) Output Utilization category Output operation Short-circuit protection Max. response frequency Operation indicator Pollution degree Front sensing Different frequency Different frequency Top sensing Different frequency G-8FU10 G-8FUI10 G-8FUB10 G-8FUIB10 G-8HU10 G-8HUI10 G-8HUB10 G-8HUIB10.5mm0% 0 to 1.8mm Iron sheet 1515t1mm 0% or less of operation distance 1 to 4V DC10% 0.8m or less Non-contact DC -wire type current: to 70m (Note ) Residual voltage: V or less (Note 4) DC-1 or DC-1 Normally closed Normally closed Incorporated 1kHz Orange ED (lights up when the output is ON) (Industrial environment) Different frequency Environmental resistance Protection mbient temperature mbient humidity EMC Voltage withstandability Insulation resistance Vibration resistance IP7 (IEC) 5 to70c, Storage:0 to80c 5 to 95% RH, Storage: 5 to 95% RH Emission: EN50081-, Immunity: EN5008-1,000V C for one min. between all supply terminals connected together and enclosure 50MΩ, or more, with 50V DC megger between all supply terminals connected together and enclosure 10 to 55Hz frequency, 1.5mm amplitude in X, Y and Z directions for two hours each Shock resistance Temperature characteristics Sensing range variation Voltage characteristics Material Cable Cable extension Weight 1,000m/s acceleration (100G approx.) in X, Y and Z directions for three times each 15 Over ambient temperature range5 to70c: within 10% of sensing range at 0C Within% for10% fluctuation of the supply voltage Enclosure: Polyalylate 0.15mm -core cabtyre cable, 1m long Extension up to total 50m is possible with 0.mm, or more, cable. 1g approx. Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. Notes: ) It is the leakage current when the output is in the OFF state. Notes: ) The maximum load current varies with the ambient temperature. Refer to I/O CIRCUIT ND WIRING DIGRMS for more details. Notes: 4) When the cable is extended, the residual voltage becomes larger according to the resistance of the cable. 40

8 G-8U I/O CIRCUIT ND WIRING DIGRMS I/O circuit diagram Sensor circuit Tr Color code Internal circuit ZD (Brown) Output (Blue) 0V Users circuit Bleeder resistance to 70m in ON state (Note) 0.8m in OFF state V in ON state Symbols... ZD: Surge absorption zener diode Tr : NPN output transistor Note: The maximum load current varies depending on the ambient temperature. 1 to 4V DC 10% Wiring diagram Conditions for the load Brown Blue Bleeder resistance 1 to 4V DC 10% 1) The load should not be actuated by the leakage current (0.8m) in the OFF state. ) The load should be actuated by (supply voltage V) in the ON state. ) The current in the ON state should be between to 70m DC. In case the current is less than m, connect a bleeder resistance in parallel to the load so that a current of m, or more, flows. Max. load current (m) mbient temperature ( C) 70 SENSING CHRCTERISTICS (TYPIC) Sensing field 4 Standard sensing object Standard sensing object Iron sheet 1515t1mm Iron sheet 1515t1mm # # Front sensing Top sensing Setting distance (mm) 1 Correlation between sensing object size and sensing range 4 Sensing object Sensing object aamm aamm Sensing range (mm) 1 Front sensing t1mm t1mm Top sensing Iron Stainless steel (SUS04) Brass luminum s the sensing object size becomes smaller than the standard size (iron sheet 1515t1mm), the sensing range shortens as shown in the left figure eft Center Right Operating point?(mm) Sensing object side length a (mm) 41

9 G-8U PRECUTIONS FOR PROPER USE This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. Mutual interference prevention When two or more sensors are installed in parallel or face to face, keep the minimum separation distance specified below to avoid mutual interference. Mounting Make sure to mount with an M (length 1mm) truss head screw with a tightening torque of 0.5 Nm or less. Do not use a flat head screw or a pan head ( ) screw. Influence of surrounding metal When there is a metal near the sensor, keep the minimum separation distance specified below. G-8FU10 ".4 hole (Depth: mm or more) 11.5mm M (length 1mm) truss head screw ccessory with ( MS-G810 ) MS-G810 (Optional) M0.5mm tapped hole (Depth: 8mm or more) or ".4mm thru-hole If mounting using nut and washers ccessory with ( MS-G810 ) G-8FU10 B G-8HU10 B G-8FU type G-8HU type Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types 0mm (Note ) 0mm 0mm (Note ) 5mm 15mm 40mm 15mm 40mm Notes: 1) I in the model No. specifies the different frequency type. Notes: ) Close mounting is possible for up to two sensors. When mounting three sensors or more, at an equal spacing, in a row, the minimum value of dimension should be as given below. Notes: ) G-8FU type: mm G-8HU type: 8.5mm B 8mm G-8HU10 mm 10mm mm mm mm mm mm Sensing range The sensing range is specified for the standard sensing object (iron sheet 1515t1mm). With a non-ferrous metal, the sensing range is obtained by multiplying with the correction coefficient specified on the right. Correction coefficient Model No. G-8FU10 G-8HU10 Iron sheet 1 Stainless Steel (SUS04) Brass luminum 0.80 approx approx. 0.5 approx. Further, the sensing range also changes if the sensing object is smaller than the standard sensing object (iron sheet 1515t1mm) or if the sensing object is plated. Others Do not use during the initial transient time (50ms) after the power supply is switched on. 4

10 G-8U DIMENSIONS (Unit: mm) G-8FU10 Sensor G-8HU10 Sensor Operation indicator (Orange) Operation indicator (Orange) ".1 mounting hole Sensing direction ".8 cable 1m long Sensing direction 7.8 ".1 mounting hole ".8 cable 1m long MS-G810 Sensor mounting bracket (Optional) Mounting hole dimensions (9.0). Center of sensing ".4 hole or more deep (1.) (11.5). t M0.5 tapped hole 8 or more deep 4.5 ".1 hole Material: Stainless steel (SUS04) 1 No. each of M (length 1mm) truss head screw, nut, spring washer and plain washer is attached. 4

11 G-18H/18H Square-shaped ong Range Inductive Proximity Sensor High Performance Sensing Marked Conforming to EMC Directive ow Price It provides high performance at a low price. Different Frequency Type Two sensors can be mounted closely because different frequency types are available. The long sensing range type, G-18H(B), and its different frequency type, G-18HI, can be mounted 0mm away from each other. ( ) ong Sensing Range G-18H offers a long sensing range of 1mm. (G-18H: 5mm) 1mm PPICTIONS Detecting over-run of moving table Positioning metal pallet Detecting aluminum lid 470

12 G-18H/18H ORDER GUIDE Type ppearance (mm) Sensing range (Note 1) Model No. (Note ) Output operation Maximum operation distance G-18H Standard 5mm (0 to 4mm) G-18HI 18 Stable sensing range G-18HB Normally closed ong sensing range mm (0 to 10mm) G-18H G-18HI G-18HB Normally closed Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. Notes: ) I in the model No. indicates a different frequency type. SPECIFICTIONS Item Max. operation distance (Note) Stable sensing range (Note) Standard sensing object Hysteresis Supply voltage Current consumption Output Utilization category Output operation Max. response frequency Operation indicator Pollution degree Protection mbient temperature mbient humidity EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Sensing range Temperature characteristics variation Voltage characteristics Material Cable Cable extension Weight ccessory Environmental resistance Type Model No. Standard ong sensing range Different frequency Different frequency G-18H G-18HI G-18HB G-18H G-18HI G-18HB 5mm10% 1mm10% 0 to 4mm 0 to 10mm Iron sheet 55t1mm Iron sheet 4040t1mm 15% or less of operation distance 10 to 0V DC Ripple P-P 10% or less 10m or less NPN open-collector transistor Maximum sink current: 100m pplied voltage: 0V DC or less (between output and 0V) Residual voltage: 1.5V or less (at 100m sink current) 0.4V or less (at 1m sink current) DC-1 or DC-1 Normally closed Normally closed 1kHz 500Hz Red ED (lights up when the output is ON) (Industrial environment) IP7 (IEC), IP7g (JEM) 5 to70c, Storage:5 to70c 45 to 85% RH, Storage: 45 to 85% RH Emission: EN50081-, Immunity: EN5008-1,000V C for one min. between all supply terminals connected together and enclosure 50MΩ, or more, with 50V DC megger between all supply terminals connected together and enclosure 10 to 55Hz frequency, 1.5mm amplitude in X, Y and Z directions for two hours each 1,000m/s acceleration (100G approx.) in X, Y and Z directions for three times each Over ambient temperature range5 to70c: within10% of sensing range at 0C Within% for10% fluctuation of the supply voltage Enclosure: Polyalylate 0.mm -core oil resistant cabtyre cable, 1m long Extension up to total 100m is possible with 0.mm, or more, cable. 45g approx. MS-G18H (Sensor mounting bracket): 1 set Note: The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. 471

13 G-18H/18H I/O CIRCUIT ND WIRING DIGRMS G-18H G-18H I/O circuit diagram Wiring diagram Color code Brown Sensor circuit Tr ZD (Brown)V (Black) Output 100m max. (Blue) 0V 10 to 0V DC Black Blue 10 to 0V DC Internal circuit Users circuit Symbols... ZD: Surge absorption zener diode Tr : NPN output transistor SENSING CHRCTERISTICS (TYPIC) G-18H Sensing field 8 Setting distance (mm) 4 Standard sensing object Iron sheet 55t1mm # Correlation between sensing object size and sensing range 8 Sensing object aa mm s the sensing object size becomes smaller than t1mm the standard size (iron sheet 55t1mm), the sensing range shortens as shown in the left Iron figure. Sensing range (mm) 4 Stainless steel (SUS04) Brass luminum eft Center Right Operating point?(mm) Sensing object side length a (mm) Setting distance (mm) G-18H Sensing field 10 5 Standard sensing object Iron sheet 4040t1mm # Correlation between sensing object size and sensing range 0 Sensing object aa mm s the sensing object size becomes smaller than t1mm the standard size (iron sheet 4040t1mm), the sensing range shortens as shown in the left 15 figure. Iron Sensing range (mm) 10 5 Stainless steel (SUS04) Brass luminum eft Center Right Operating point?(mm) Sensing object side length a (mm) 47

14 G-18H/18H PRECUTIONS FOR PROPER USE This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. Mounting The tightening torque should be 0.5Nm or less. To mount the sensor with a nut, the thru-hole diameter should be ".4mm. Screws, nuts or washers are not supplied. Please arrange them separately. 10.5mm Influence of surrounding metal When there is a metal near the sensor, keep the minimum separation distance specified below. B C B C D G-18H 5mm 0mm 0mm 5mm M pan head screws or truss head screw (Do not uses flat head screws) M0.5mm tapped hole or ".4mm thru-holes One set of two washers and a nut is used. G-18H 5mm 0mm 0mm (Note) 0mm Note: When the G-18H is mounted on an insulator, or seated on the D attached aluminum mounting D bracket, the distance C can be zero. Mutual interference prevention When two or more sensors are installed in parallel or face to face, keep the minimum separation distance specified below to avoid mutual interference. Sensing range The sensing range is specified for the standard sensing object. With a non-ferrous metal, the sensing range is obtained by multiplying with the correction coefficient specified below. Further, the sensing range also changes if the sensing object is plated. Correction coefficient Iron Stainless steel (SUS04) Brass luminum Model No. G-18H approx approx. 0.4 approx. G-18H Wiring The output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Others Do not use during the initial transient time (50ms) after the power supply is switched on approx. 0.4 approx approx. G-18H G-18H Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types E F E 0mm (Note ) 40mm 0mm (Note ) 10mm F 0mm 70mm 40mm 00mm Notes: 1) I in the model No. specifies the different frequency type. Notes: ) Close mounting is possible for up to two sensors. When mounting three sensors or more, at an equal spacing, in a row, the minimum value of dimension E should be 11mm. DIMENSIONS (Unit: mm) G-18H G-18H Sensor MS-G18H Sensor mounting bracket for G-18H (ccessory) ". mounting holes -M (.1) (4.5) "4.8 cable 1m long Operation indicator (Red) Material: luminum Two M pan head screws are attached. 0 t 47

15 G-N1 Square-shaped Inductive Proximity Sensor SERIES Wide Variety with Total Cost Reduction Marked Conforming to EMC Directive Exclusive Mounting Bracket is Needless The G-N1 series can be reliably fixed even without an exclusive mounting bracket as a boss is provided on the bottom face of the sensor to prevent rotation. Boss ong Sensing Range It achieves a sensing range of 4mm with a 1mm square-size sensing part. It can reliably detect an object even if its position varies slightly. ow Price The G-N1 series is recommended to large volume users for cost reduction. Exclusive mounting bracket Sensor Conventional model Cost saving Sensor G-N1 series Cost saving is achieved as the exclusive mounting bracket is not required. The G-N1 series is available in units of ten sensors. Waterproof Since the sensor has IP7 protection, it can withstand water splashes. Wide Variation wide variety of 1 types, front sensing type/top sensing type, normally open type/normally closed type, as well as, different frequency type, PNP output type, etc., is available. You can choose from the vastly increased variety to suit your application. Front sensing type Top sensing type 4mm 44

16 G-N1 PPICTIONS Confirming shutting/opening of door Detecting rolling coins Detecting metal parts on a feeder piece ORDER GUIDE Boss type Type ppearance (mm) Sensing range (Note 1) Model No. (Note ) Output Output operation Top sensing Front sensing PNP output NPN output PNP output NPN output mm Maximum operation distance (0 to mm) Stable sensing range G-N1F10 G-N1FI10 G-N1FB10 G-N1FIB10 G-N1F-P10 G-N1FI-P10 G-N1FB-P10 G-N1FIB-P10 G-N1H10 G-N1HI10 G-N1HB10 G-N1HIB10 G-N1H-P10 G-N1HI-P10 G-N1HB-P10 G-N1HIB-P10 NPN open-collector transistor PNP open-collector transistor NPN open-collector transistor PNP open-collector transistor Normally closed Normally closed Normally closed Normally closed Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. Notes: ) I in the model No. indicates a different frequency type (custom-order product). NOTE: ow price square-shaped inductive proximity sensors (G-N1 series) are available in units of ten. Without boss type (Front sensing type, NPN output type and normally open type only) The without boss type is also available. (Standard: boss type) Model No.: G-1F10 (front sensing type) MS-G110 (sensor mounting bracket) Units of ten 45

17 G-N1 SPECIFICTIONS Item Model No. Type Max. operation distance (Note ) Stable sensing range (Note ) Standard sensing object Hysteresis Supply voltage Current consumption NPN output 10m or less Boss type (Note 1) 40.5mm 0 to mm Iron sheet 00t1mm 0% or less of operation distance 1 to 4V DC10% Ripple P-P 10% or less PNP output Front sensing Top sensing Front sensing Top sensing Different frequency Different frequency Different frequency Different frequency G-N1F10 G-N1FI10 G-N1H10 G-N1HI10 G-N1F-P10 G-N1FI-P10 G-N1H-P10 G-N1HI-P10 Normally closed G-N1FB10 G-N1FIB10 G-N1HB10 G-N1HIB10 G-N1FB-P10 G-N1FIB-P10 G-N1HB-P10 G-N1HIB-P10 15m or less Output NPN open-collector transistor Maximum sink current: 100m pplied voltage: 0V DC or less (between output and 0V) Residual voltage: 1V or less (at 100m sink current) 0.4V or less (at 1m sink current) PNP open-collector transistor Maximum source current: 100m pplied voltage: 0V DC or less (between output andv) Residual voltage: 1V or less (at 100m source current) 0.4V or less (at 1m source current) Utilization category Max. response frequency Operation indicator Pollution degree Protection mbient temperature mbient humidity EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Sensing range Temperature characteristics variation Voltage characteristics Material Cable Cable extension Weight Environmental resistance DC-1 or DC-1 1.kHz Orange ED (lights up when the output is ON) (Industrial environment) IP7 (IEC) 10 to55 C, Storage:5 to70 C 45 to 85% RH, Storage: 5 to 95% RH Emission: EN50081-, Immunity: EN5008-1,000V C for one min. between all supply terminals connected together and enclosure 50MΩ, or more, with 50V DC megger between all supply terminals connected together and enclosure 10 to 55Hz frequency, 1.5mm amplitude in X, Y and Z directions for two hours each 1,000m/s (100G approx.) acceleration in X, Y and Z directions for three times each Over ambient temperature range10 to55 C: within 15 % of sensing range at 0 C 10 Within% for10% fluctuation of the supply voltage Enclosure: Polyalylate 0.18mm -core cabtyre cable, 1m long Extension up to total 100m is possible with 0.mm, or more, cable. 0g approx. Notes: 1) The without boss type is also available. The specifications are the same as for the boss type. Notes: ) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. 4

18 G-N1 I/O CIRCUIT ND WIRING DIGRMS NPN output type I/O circuit diagram Wiring diagram Color code Brown Sensor circuit Tr ZD (Brown)V (Black) Output 100m max. (Blue) 0V 1 to 4V DC 10% G-N1F Black Blue 1 to 4V DC 10% Internal circuit Users circuit Symbols... ZD: Surge absorption zener diode Tr : NPN output transistor PNP output type I/O circuit diagram Wiring diagram Color code Brown Sensor circuit Tr ZD (Brown)V 100m max. (Black) Output (Blue) 0V 1 to 4V DC 10% G-N1F Black Blue 1 to 4V DC 10% Internal circuit Users circuit Symbols... ZD: Surge absorption zener diode Tr : PNP output transistor SENSING CHRCTERISTICS (TYPIC) Sensing field 4 Standard sensing object Iron sheet 00t1mm # Setting distance (mm) 1 Front sensing Standard sensing object Iron sheet 00t1mm eft Center Right Operating point?(mm) # Top sensing Correlation between sensing object size and sensing range 4 Iron Stainless steel (SUS04) Sensing range (mm) Sensing object Sensing object aamm aamm 1 t1mm t1mm Front sensing Top sensing 0 Brass luminum Sensing object side length a (mm) s the sensing object size becomes smaller than the standard size (iron sheet 00t1mm), the sensing range shortens as shown in the left figure. 47

19 G-N1 PRECUTIONS FOR PROPER USE Mounting The tightening torque should be 0.5Nm or less. To mount the sensor with a nut, the mounting hole diameter should be ".4mm. Further, the hole in which the boss is inserted should be ".5mm and mm, or more, deep. Influence of surrounding metal When there is a metal near the sensor, keep the minimum separation distance specified below. G-N1F10 This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. 0 (Unit: mm).mm G-1F 1 mm ".5mm hole (Depth: mm or more) M (length 1mm or more) pan head screw (Please arrange separately.) M0.5mm tapped hole (Depth: 10mm or more) or ".4mm thru-hole If mounting using nut and washers (Please arrange separately.) 7 7 Sensing range Correction coefficient The sensing range Model No. G-N1F10 is specified for the G-N1H10 standard sensing Iron 1 object (iron sheet Stainless steel (SUS04) 0.79 approx. 00t1mm). Brass 0.5 approx. With a non-ferrous luminum 0.5 approx. metal, the sensing range is obtained by multiplying with the correction coefficient specified on the right. Further, the sensing range also change if the sensing object is smaller than the standard sensing object (iron sheet 00t1mm) or if the sensing object is plated. Wiring The output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Others Do not use during the initial transient time (50ms) after the power supply is switched on.. G-N1H10 (Unit: mm) 7 0 Mutual interference prevention When two or more sensors are installed in parallel or face to face, keep the minimum separation distance specified below to avoid mutual interference. B G-N1F10, G-N1H10 Between I type and non I type 0mm (Note ) 5mm Between two I types or two non I types 5mm 50mm G-N1F10 B G-N1H10 Notes: 1) I in the model No. specifies the different frequency type. ) Close mounting is possible for up to two sensors. When mounting three sensors or more, at an equal spacing, in a row, the minimum value of dimension should be.5mm. B 48

20 G-N1 DIMENSIONS (Unit: mm) G-N1F10 Sensor G-N1H10 Sensor Operation indicator (Orange) ". Operation indicator (Orange) " cable 1m long G-N1F Sensing direction Sensing direction G-N1H " screw seat 1.4 deep ". mounting hole " screw seat 1.4 deep ". mounting hole " cable 1m long " G-1F10 Sensor MS-G110 Sensor mounting bracket (Optional) Mounting hole dimensions 11. " screw seat 1.4 deep G-1F Operation indicator (Red) Sensing direction (1.) (1) 8.5 t 0.4 Center of sensing 1 ".5 hole or more deep M0.5 tapped hole 10 or more deep ". mounting hole " cable 1m long (1.05) ". hole Material: Cold rolled carbon steel (SPCC) Material: (Nickel plated) 1 No. each of M (length 1mm) pan head screw, plain washer, spring washer and rubber washer ("9.5t 0.5mm) is attached. 49