E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models

Size: px
Start display at page:

Download "E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models"

Transcription

1 Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility. A milled section for wrench grip on all models. Be sure to read Safety Precautions on page 9. Ordering Information Sensors DC -Wire Models Model Appearance Sensing distance Operation mode NO NC M1 3 mm EE-3D1 M * EE-3D M M1 7 mm EE-7D1 M * EE-7D M M3 mm EE-D1 M * EE-D M M1 mm EE-MD1 M * EE-MD M M1 1 mm EE-1MD1 M * EE-1MD M M3 mm EE-MD1 M * EE-MD M * Models with different frequencies are also available. The model numbers are EE-@D1 (example: EE-3D1). DC 3-Wire Models Appearance Sensing distance Model Operation mode NO NC M1 mm EE-C1 M EE-C M M1 mm EE-C1 M EE-C M M3 mm EE-C1 M EE-C M M1 mm EE-MC1 M EE-MC M M1 mm EE-MC1 M EE-MC M M3 1 mm EE-1MC1 M EE-1MC M AC -Wire Models Appearance Sensing distance Model Operation mode NO NC M1 mm EE-Y1 M EE-Y M M1 mm EE-Y1 M EE-Y M M3 mm EE-Y1 M EE-Y M M1 mm EE-MY1 M EE-MY M M1 mm EE-MY1 M EE-MY M M3 1 mm EE-1MY1 M EE-1MY M 1

2 EE Accessories (Order Separately) Mounting Brackets Protective Covers Sputter Protective Covers Ratings and Specifications DC -Wire Models Size M1 M1 M3 Shielding Item Model Sensing distance 3 mm±% mm±% 7 mm±% 1 mm±% mm±% mm±% Set distance *1 to. mm to. mm to. mm to 11. mm to mm to 1 mm Differential travel Standard sensing object % max. of sensing distance Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page.) mm mm mm mm mm Response frequency * 1 khz Hz Hz Hz Hz Power supply voltage (operating voltage range) Leakage current Control output Indicators Switching capacity 1 to VDC ( to 3 VDC), ripple (p-p): % max.. ma max. 3 to ma Residual voltage 3 V max. (Load current: ma, Cable length: m) Ambient temperature Ambient humidity D1 Models: Operation indicator (red) and setting indicator (green) D Models: Operation indicator (red) D1 Models: NO D Models: NC Surge absorber, Load short-circuit protection Operating/Storage: to 7 C (with no icing or condensation) Operating/Storage: 3% to 9% (with no condensation) Temperature influence ±% max. of sensing distance at 3 C in the temperature range of to 7 C Voltage influence Insulation resistance Dielectric strength Vibration resistance (destruction) Shock resistance (destruction) Degree of protection ±1% max. of sensing distance at rated voltage in the rated voltage ±1% range MΩ min. (at VDC) between current-carrying parts and case VAC, / Hz for 1 minute between current-carrying parts and case to Hz, 1.-mm double amplitude for hours each in, Y, and Z directions 1, m/s times each in, Y, and Z directions IEC IP7, in-house standard for oil resistance Connection method Pre-wired Models (Standard cable length: m) Weight (packed state) Approx. g Approx. 1 g Approx. g Case Operation mode (with sensing object approaching) Protection circuits Materials Accessories Sensing surface Clamping nuts PBT Nickel-plated brass Zinc-plated iron Instruction sheet Refer to the timing charts under I/O Circuit Diagrams on page for details. 1 mm *1. Use the EE within the range in which the setting indicator (green LED) is (except D Models). *. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

3 EE DC 3-Wire Models Size M1 M1 M3 Shielding Item Model Sensing distance mm±% mm±% mm±% mm±% mm±% 1 mm±% Set distance to 1. mm to mm to mm to mm to mm to 1 mm Differential travel Standard sensing object % max. of sensing distance Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page.) mm mm mm mm mm Response frequency *1 1. khz Hz Hz Hz Hz Hz Power supply voltage (operating voltage range) * 1 to VDC ( to VDC), ripple (p-p): % max. Leakage current 13 ma max. Control Load current NPN open-collector output, ma max. ( VDC max.) output Residual voltage V max. (Load current: ma, Cable length: m) Indicators Ambient temperature Ambient humidity Temperature influence Voltage influence Insulation resistance Dielectric strength Vibration resistance (destruction) Shock resistance (destruction) Degree of protection Connection method Operation indicator (red) C1 Models: NO C Models: NC Reverse polarity protection, Surge absorber, Load short-circuit protection Operating/Storage: to C (with no icing or condensation) Operating/Storage: 3% to 9% (with no condensation) ±1% max. of sensing distance at 3 C in the temperature range of to C ±% max. of sensing distance at 3 C in the temperature range of to 7 C ±1% max. of sensing distance at rated voltage in the rated voltage ±1% range MΩ min. (at VDC) between current-carrying parts and case 1, VAC, / Hz for 1 minute between current carry parts and case to Hz, 1.-mm double amplitude for hours each in, Y, and Z directions 1, m/s times each in, Y, and Z directions IEC IP7, in-house standard for oil resistance Pre-wired Models (Standard cable length: m) and Connector Models Weight (packed state) Approx. 7 g Approx. 1 g Approx. g Case Operation mode (with sensing object approaching) Protection circuits Materials Accessories Sensing surface Clamping nuts PBT Nickel-plated brass Zinc-plated iron Instruction sheet Refer to the timing charts under I/O Circuit Diagrams on page for details. 1 mm *1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. *. A full-wave rectification power supply of VDC ±% (average value) can be used. 3

4 EE AC -Wire Models Size M1 M1 M3 Shielding Item Model Sensing distance mm±% mm±% mm±% mm±% mm±% 1 mm±% Set distance to 1. mm to mm to mm to mm to mm to 1 mm Differential travel Standard sensing object Response frequency Power supply voltage (operating voltage range) *1 % max. of sensing distance Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page.) mm Hz mm to VAC ( to VAC), / Hz mm Leakage current 1.7 ma max. Control Load current * to ma to 3 ma output Residual voltage Refer to Engineering Data on page. Indicators Ambient humidity Temperature influence Voltage influence Insulation resistance Dielectric strength Vibration resistance (destruction) Shock resistance (destruction) Degree of protection Connection method Operation indicator (red) Y1 Models: NO Y Models: NC mm Operating/Storage: to C (with no icing or condensation) Operating/Storage: 3% to 9% (with no condensation) mm ±1% max. of sensing distance at 3 C in the temperature range of to C, ±% max. of sensing distance at 3 C in the temperature range of to 7 C ±1% max. of sensing distance at rated voltage in the rated voltage ±1% range MΩ min. (at VDC) between current-carrying parts and case, VAC, / Hz for 1 minute between current carry parts and case to Hz, 1.-mm double amplitude for hours each in, Y, and Z directions 1, m/s times each in, Y, and Z directions IEC IP7, in-house standard for oil resistance Pre-wired Models (Standard cable length: m) and Connector Models Weight (packed state) Approx. g Approx. 1 g Approx. g Case Operation mode (with sensing object approaching) Ambient temperature *1, Materials Accessories Sensing surface Clamping nuts PBT Nickel-plated brass Zinc-plated iron Instruction sheet Refer to the timing charts under I/O Circuit Diagrams on page for details. 1 mm *1. When supplying VAC to any of the above models, make sure that the operating ambient temperature range is at least C to C. *. When using an M1 or M3 Connector Model at an ambient temperature between 7 and C, make sure that the Sensor has a control output (load current) of to ma max.

5 Y Engineering Data (Typical) EE Sensing Area Models Distance (mm) 1 EE- EE-7 Distance (mm) 1 EE- Y EE- EE-3 EE Models EE-@MD@ Distance (mm) 3 1 Y Distance Y (mm) EE -1M EE -M EE -M EE-@MC@/-@MY@ Distance (mm) 3 1 Y Distance Y (mm) EE-1M EE-M EE-M Distance Y (mm) Distance Y (mm) Leakage Current Residual Output Voltage EE-@D@ EE-@Y@ EE-@D@ Leakage current (ma) 1... Leakage current (ma) Residual output voltage (V) Power supply voltage (V)... Proximity Sensor () ma V Protective resistance AC power 1 3 Power supply voltage (V) Load current (ma)

6 EE at VAC at VAC at VAC Load voltage VL (V) 3 1 Residual output voltage VAC A Residual load voltage V VL Load current (ma) Load voltage VL (V) 1 Residual output voltage A Residual load voltage V VL VAC Load current (ma) Load voltage VL (V) 1 1 Residual output voltage A Residual load voltage V VL VAC Load current (ma) Influence of Sensing Object Size and Material EE-3D@ EE-7D@ EE-D@ Distance (mm) Stainless steel (SUS3) Copper Distance (mm) Stainless steel (SUS3) Copper Distance (mm) 1 Stainless steel (SUS3) Copper EE-MD@ EE-1MD@ EE-MD@ Distance (mm) 1 Stainless steel (SUS3) Copper Distance (mm) 1 Stainless steel (SUS3) Copper Distance (mm) Stainless steel (SUS3) Copper

7 EE Distance (mm). 1. Stainless steel (SUS3) Distance (mm) 7 Stainless steel (SUS3) Distance (mm) 1 Stainless steel (SUS3) EE-MC@/-MY@ EE-MC@/-MY@ EE-1MC@/-1MY@ Distance (mm) 7 Distance (mm) 1 Distance (mm) Stainless steel (SUS3) Stainless steel (SUS3) 1 Stainless steel (SUS3)

8 I/O Circuit Diagrams EE DC -Wire Models Operation mode Model Timing Charts Output circuit NO EE-3D1 EE-7D1 EE-D1 EE-MD1 EE-1MD1 EE-MD1 Non-sensing area Sensing object Unstable sensing area Set position Stable sensing area Proximity Sensor (%) Rated sensing distance Setting indicator (green) Operation indicator (red) Control output Proximity Sensor main circuit Brown Load +V NC EE-3D EE-7D EE-D EE-MD EE-1MD EE-MD Sensing object (%) Non-sensing area Stable sensing area Rated sensing distance Proximity Sensor Operation indicator (red) Blue V Note: The load can be connected to either the +V or V side. Control output DC 3-Wire Models Operation mode NO NC Model Timing Charts Output circuit EE-C1 EE-C1 EE-C1 EE-MC1 EE-MC1 EE-1MC1 EE-C EE-C EE-C EE-MC EE-MC EE-1MC Present Not present Operation indicator (red) Control output Present Not present Operation indicator (red) Control output Proximity Sensor main circuit Ω Brown Black Blue Load +V V

9 EE AC -Wire Models Operation mode NO NC Model Timing Charts Output circuit EE-Y1 EE-Y1 EE-Y1 EE-MY1 EE-MY1 EE-1MY1 EE-Y EE-Y EE-Y EE-MY EE-MY EE-1MY Present Not present Operation indicator (red) Control output Present Not present Operation indicator (red) Control output Proximity Sensor main circuit Brown Load Blue Safety Precautions WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use Do not use this product under ambient conditions that exceed the ratings. Design l Influence of Surrounding Metal When mounting the Sensor within a metal panel, ensure that the clearances given in the following table are maintained. m D d dia. l m n (Unit: mm) DC -Wire Models EE-@D@ DC 3-Wire Models EE-@C@ AC -Wire Models EE-@Y@ Model Item M1 M1 M3 l d D m n 1 7 l 1 3 d 7 9 D 1 3 m 7 n 7 9 l d D m n 1 7 l 1 3 d 9 D 1 3 m 7 n 3 9 9

10 EE Mutual Interference When installing Sensors face-to-face or side-by-side, ensure that the minimum distances given in the following table are maintained. Mutual Interference DC -Wire Models DC 3-Wire Models AC -Wire Models Model Item M1 M1 M3 Note: Values in parentheses apply to Sensors operating at different frequencies. A B A B 3 () (1) 1 () () A (3) 3 (1) () 1 () (Unit: mm) () 7 (3) 3 () () A 3 B 3 7 A 1 3 B 1 B Relationship between Sizes and Models Size Model EE-3D@ EE-C@ EE-Y@ M1 EE-MD@ EE-MC@ EE-MY@ EE-7D@ EE-C@ EE-Y@ M1 EE-1MD@ EE-MC@ EE-MY@ EE-D@ EE-C@ EE-Y@ M3 EE-MD@ EE-1MC@ EE-1MY@ Mounting Tightening Torque Do not tighten the nut with excessive force. A washer must be used with the nut. The following strengths assume washers are being used. Model M1 M1 M3 Torque 3 N m 7 N m 1 N m

11 EE Dimensions (Unit: mm) Unless otherwise specified, the tolerance class IT1 is used for dimensions in this data sheet. 1 dia dia M1 1 Two clamping nuts Indicators * *1. -dia. vinyl-insulated round cable with conductors (Conductor cross section:.3 mm, Insulator diameter: 1.3 mm), Standard length: m -dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:.3 mm, Insulator diameter: 1.3 mm), Standard length: m The cable can be extended to up to m (Separate metal conduit.) *. D Models: Operation indicator (red) and setting indicator (green), C/Y Models: Operation indicator (red) *1 9 dia. M1 1 Two clamping nuts Indicators * *1. -dia. vinyl-insulated round cable with conductors (Conductor cross section:.3 mm, Insulator diameter: 1.3 mm), Standard length: m -dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:.3 mm, Insulator diameter: 1.3 mm), Standard length: m The cable can be extended to up to m (Separate metal conduit.) *. D Models: Operation indicator (red) and setting indicator (green), C/Y Models: Operation indicator (red) *1 EE-7D@/EE-C@/EE-Y@ 9 dia. 1 EE-1MD@/EE-MC@/EE-MY@ 9 dia. 1 *1 Indicators * M1 1 Two clamping nuts *1. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m -dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m The cable can be extended to up to m (Separate metal conduit.) *. D Models: Operation indicator (red) and setting indicator (green), C/Y Models: Operation indicator (red) 1. dia. *1 Indicators * M1 1 Two clamping nuts *1. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m -dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m The cable can be extended to up to m (Separate metal conduit.) *. D Models: Operation indicator (red) and setting indicator (green), C/Y Models: Operation indicator (red) EE-D@/EE-C@/EE-Y@ 7 dia. 3 1 EE-MD@/EE-1MC@/EE-1MY@ dia Indicators * M3 1. Two clamping nuts *1. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m -dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m The cable can be extended to up to m (Separate metal conduit.) *. D Models: Operation indicator (red) and setting indicator (green), C/Y Models: Operation indicator (red) *1. dia. *1 Indicators * M3 1. Two clamping nuts *1. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m -dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:. mm, Insulator diameter: 1.9 mm), Standard length: m The cable can be extended to up to m (Separate metal conduit.) *. D Models: Operation indicator (red) and setting indicator (green), C/Y Models: Operation indicator (red) Mounting Hole Dimensions F Note 1. Two clamping nuts and one toothed washer are provided with each Sensors.. The model number is laser-marked on the cable section and milled section. Dimension M1 M1 M F (mm) 1. dia. 1. dia. 3. dia. In the interest of product improvement, specifications are subject to change without notice. 11

12 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMR representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMR's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMR. OMR MAKES NO WARRANTY OR REPRESENTATI, EPRESS OR IMPLIED, REGARDING N-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMR DISCLAIMS ALL OTHER WARRANTIES, EPRESS OR IMPLIED. LIMITATIS OF LIABILITY OMR SHALL NOT BE RESPSIBLE FOR SPECIAL, INDIRECT, OR CSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED CTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMR for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMR BE RESPSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMR'S ANALYSIS CFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CTAMINATI, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATI OR REPAIR. Application Considerations SUITABILITY FOR USE OMR shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMR will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATI INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMR PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMR shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMR representative at any time to confirm actual specifications of purchased products. DIMENSIS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMR s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMR Warranty and Limitations of Liability. ERRORS AND OMISSIS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. OMR Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMR Corporation 9 All Right Reserved.

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.

More information

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models Long-barrel Inductive Proximity Sensor E2E2 Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility. A milled

More information

Digital display Pressure range ON/OFF output Linear output Model

Digital display Pressure range ON/OFF output Linear output Model Slim Digital Pressure Sensor E8CC with Built-in Microcomputer and Digital Display Withstands a pressure of 49 kpa and highly reliable. Incorporates a two-turn pressure adjuster ensuring easy pressure setting.

More information

E2EZ-X2D1-N E2EZ-X2D2-N

E2EZ-X2D1-N E2EZ-X2D2-N Chip-immune Inductive s Detects Objects without Being Influenced by Aluminum or Iron Chips Series now includes M s. s also available. CE Marking for DC -Wire and DC -Wire s. Be sure to read Safety Precautions

More information

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page

More information

G3PE-Single-phase. Solid State Relays for Heaters

G3PE-Single-phase. Solid State Relays for Heaters Solid State Relays for Heaters Single-phase CSM_Single-phase_DS_E Compact, Slim-profile SSRs with Heat Sinks. s with No Zero Cross for a Wide Range of Applications. RoHS compliant. s also available with

More information

Cylindrical photoelectric sensors in M18 plastic or brass housings. Performance and portfolio variety. Metal *1 90 Optics AC power supply *2

Cylindrical photoelectric sensors in M18 plastic or brass housings. Performance and portfolio variety. Metal *1 90 Optics AC power supply *2 Cylindrical photoelectric sensors in M8 plastic or brass housings Complete sensor portfolio in plastic and metal housing IP67, IP69K for highest water resistance High immunity against electro-magnetic

More information

2NC (slow-action) Direct. Model. opening

2NC (slow-action) Direct. Model. opening Small Safety Limit Switch CSM DS_E_3_1 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The world's

More information

Multiple Limit Switch

Multiple Limit Switch Multiple Limit Switch CSM DS_E_1_1 A New Monoblock Multiple Limit Switch Incorporating a ead Box with a Tough ead and Ensuring igh Sealing Performance and a Mechanical Durability of 5,000,000 Operations

More information

M2S. Indicator Series with Square 40-mm Body. Indicator (Square) List of Models

M2S. Indicator Series with Square 40-mm Body. Indicator (Square) List of Models Indicator (Square) CSM DS_E_3_2 Indicator Series with Square 40-mm Body Same type of Indicator as those in the A3S-series Pushbutton Switch Easy panel mounting from the front and simple lamp replacement

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor General-purpose Type in a Basic Switch Housing Mounting pitch compatible with that of mechanical basic switch. Wide operating voltage range: 10 to 30 VDC or 90 to 250 VAC. LED

More information

TL-N7MD1 7mm(0.28 in) NC. 12 mm (0.47 in)

TL-N7MD1 7mm(0.28 in) NC. 12 mm (0.47 in) R Rectangular Inductive Prox Space-Saving Sensors for a Wide Range of Applications H Switches loads up to 200 ma H Easy to install DC 2-wire models reduce wiring H DC 3-wire models available with high-flexibility

More information

A165S/W. Separate Construction with Cylindrical 16-dia. Body. Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.

A165S/W. Separate Construction with Cylindrical 16-dia. Body. Knob-type Selector Switch (Detachable) (Cylindrical 16-dia. Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.) CSM_A165S_W_DS_E_4_1 Separate Construction with Cylindrical 16-dia. Body Same separate construction as the A16-series Pushbuttons with Miniature

More information

Operation Key D4BS - K Head Mounting Direction F: Four mounting directions possible (front-side mounting at shipping)

Operation Key D4BS - K Head Mounting Direction F: Four mounting directions possible (front-side mounting at shipping) Safety-door Switch D4BS The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment CSM_D4BS_DS_E_6_1

More information

D4GS-N CSM_D4GS-N_DS_E_7_2

D4GS-N CSM_D4GS-N_DS_E_7_2 Slim Safety Door Switch D4GS-N CSM_D4GS-N_DS_E_7_2 Slim Safety Door Switches with IP67 Rating Slim design with a width of only 17 mm (three-contact models). Reversible design allowing either front or rear

More information

Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.

Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series. PRODUCT NEWS Correction Reissue Product Discontinuation Notices Proximity Sensors Issue Date August 4, 2014 No. 2014038CE(3) Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.

More information

A165E CSM_A165E_DS_E_11_2

A165E CSM_A165E_DS_E_11_2 Emergency Stop Switch (16-dia.) CSM DS_E_11_2 Separate Construction with Minimal Depth Direct opening mechanism to open contacts in emergencies, such as when they are welded. Conforms to EN 6947-5-5. Includes

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space

More information

Model Number Structure

Model Number Structure Solid State Relays CSM OEE_DS_E_1_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting

More information

Proximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1

Proximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1 Proximity Sensor A Series of Spatter-preventing Proximity Sensors with a Teflon-coated Metal Housing Teflon*-coated metal housing endures high tightening torque. Pre-wired and plug-in models are available.

More information

D4BS CSM_D4BS_DS_E_8_4

D4BS CSM_D4BS_DS_E_8_4 Safety-door Switch CSM DS_E_8_4 The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment

More information

Ratings 1 A at 125 VAC 1 A at 30 VDC LED indicator Without indicator With indicator Without indicator With indicator Actuator

Ratings 1 A at 125 VAC 1 A at 30 VDC LED indicator Without indicator With indicator Without indicator With indicator Actuator Miniature Limit Switch CSM DS_E_3_3 Many Models Including Roller Lever Switches are Only -mm Thick with Connector New center roller lever models that enable ganged mounting of up to 6 Switches. Cable connectors

More information

E2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M

E2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for

More information

D4NS. Safety-door Switch. Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch. Model Number Structure

D4NS. Safety-door Switch. Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch. Model Number Structure Safety-door Switch D4NS CSM_D4NS_DS_E_5_2 Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch Lineup includes three contact models with 2NC/1NO and 3NC contact forms and

More information

E2Q6. Rectangular Proximity Sensor. Freely Change the Sensing Direction. Ordering Information. Sensors [Refer to Dimensions on page 6] DC Models

E2Q6. Rectangular Proximity Sensor. Freely Change the Sensing Direction. Ordering Information. Sensors [Refer to Dimensions on page 6] DC Models Rectangular Freely Change the Sensing Direction Change between any of five sensing directions: front or 9 up, down, left, or right. Four indicators show the operating status of the from many directions.

More information

Small-diameter Proximity Sensor

Small-diameter Proximity Sensor Small-diameter Proximity Sensor EE Ultra small size, but surprisingly easy installation! With the addition of M, 5.-dia.,.5-dia. size, unshielded, pre-wired connector model, and connector model, a total

More information

Ordering Information. Specifications. Motor Time Switch H2F-WM. Accessories (Order Separately) Time Specifications. Ratings

Ordering Information. Specifications. Motor Time Switch H2F-WM. Accessories (Order Separately) Time Specifications. Ratings Motor Time Switch H2F-WM CSM_H2F-WM_DS_E_2_1 Weekly ON/OFF Control in 1-h Increments The H2F-WM is a Compact Weekly Time Switch in a DIN -mm Body Equipped with Power Interruption Backup Providing Protection

More information

Features. Emergency Stop Switch A165E. Separate Construction with Smallest Class of Depth in the World. Safety Lock Prevents Misuse

Features. Emergency Stop Switch A165E. Separate Construction with Smallest Class of Depth in the World. Safety Lock Prevents Misuse Emergency Stop Switch Separate Construction with Smallest Class of Depth in the World Direct opening mechanism to open contacts in emergencies, such as when they are welded. Conforms to EN418. Includes

More information

Smile 11 RA/-B Smile 12 RF/-G Reset button

Smile 11 RA/-B Smile 12 RF/-G Reset button Original Instructions Smile 11 RA/-B Smile 12 RF/-G Reset button ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this User Manual Please read

More information

A Metal Head That's. Highly Durable and Provides Long-distance Detection. mm 7(M18 Model) Proximity Sensor with All-stainless Housing E2EF NEW

A Metal Head That's. Highly Durable and Provides Long-distance Detection. mm 7(M18 Model) Proximity Sensor with All-stainless Housing E2EF NEW NEW Proximity Sensor with All-stainless Housing EEF Standard Model (Completely stainless- housing) A Metal Head That's * Highly Durable and Provides Long-distance Detection mm 7(M18 Model) *More than 0

More information

2.5 mm. (0.10 in) E2S -Q25 E2S -Q26. Output configuration. 2.5 mm. End face E2S -W15 E2S -W16 End face PNP

2.5 mm. (0.10 in) E2S -Q25 E2S -Q26. Output configuration. 2.5 mm. End face E2S -W15 E2S -W16 End face PNP Subminiature Rectangular Inductive Prox World s Smallest Square Sensor with Built-in Amplifier H. x. mm type allows smaller, space-saving machines and devices H High response frequency ( khz) for fast

More information

2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm

2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm Compact Square Inductive Proximity Sensor World s Smallest Square Sensor with uilt -in Amplifier 5.5 x 5.5 mm type contributes to smaller, space-- saving machines and devices. Comprehensive range; sensing

More information

0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)

0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h) Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and

More information

(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet

(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_4_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth

More information

Basic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing

Basic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing R Basic Switch Style Inductive Prox General-purpose Inductive Prox in a Basic Switch Housing H Mounting pitch compatible with that of a mechanical basic switch H Wide operating voltage range: 10 to 30

More information

Supply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz

Supply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz R Pancake Style Inductive Prox Long-Range Proximity Sensor Detects Metal Objects at 50 mm H Ideal for many industrial automation applications H Choose DC 3 -wire or AC 2 -wire models H Rugged die -cast

More information

Tina 11A Connection block

Tina 11A Connection block Original instructions Tina 11A Connection block ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this

More information

2NC (slow-action) Direct. Model. opening

2NC (slow-action) Direct. Model. opening Small Safety Limit Switch D4F CSM_D4F_DS_E_5_2 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The

More information

Tina 4A Connection block

Tina 4A Connection block Original instructions Tina 4A Connection block Instructions valid for versions of the product from ver. H ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read

More information

Model Number Legend (Completely Assembled)... Shipped as a set which includes the Operation Unit, Lamp (lighted models only), and Switch. 4.

Model Number Legend (Completely Assembled)... Shipped as a set which includes the Operation Unit, Lamp (lighted models only), and Switch. 4. Emergency Stop Switch (-dia./5-dia.) AE CSM_AE_DS_E_7_ Install in -dia. or 5-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating

More information

XW2R-COM. Common Terminals X W 2R - P D - COM. Space-saving and less wiring work of power supply wiring are achieved. Application Example

XW2R-COM. Common Terminals X W 2R - P D - COM. Space-saving and less wiring work of power supply wiring are achieved. Application Example Common Terminals XW2R-COM CSM_XW2R-P_M_B-COM_DS_E Space-saving and less wiring work of power supply wiring are achieved. Common wiring is already wired on the PCB, transition wiring is unnecessary. Wiring

More information

Sense7-series Non-contact coded safety switch

Sense7-series Non-contact coded safety switch Original instructions Sense7-series Non-contact coded safety switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please

More information

S8JX-N/S8JX-G Series Replacement Brackets

S8JX-N/S8JX-G Series Replacement Brackets Original model mounting method Bottom mounting Front mounting Side mounting Original model: S8JX-N/S8JX-G Replacement model: S8FS-G Replacement bracket Model scheduled to be discontinued Recommended replacement

More information

Anti-spatter Inductive Prox E2EQ. Ordering Information. Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors. H Rugged fluoroplastic coated brass

Anti-spatter Inductive Prox E2EQ. Ordering Information. Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors. H Rugged fluoroplastic coated brass R Anti-spatter Inductive Prox Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors H Rugged fluoroplastic coated brass barrel withstands high tightening torque H Fluoroplastic resin face prevents weld

More information

Input terminals Isolation method Zero cross function Operation indicator Alarm output Applicable load (See note.) Model

Input terminals Isolation method Zero cross function Operation indicator Alarm output Applicable load (See note.) Model Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer

More information

Digital display Pressure range ON/OFF output Linear output Model

Digital display Pressure range ON/OFF output Linear output Model Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be

More information

Smile 41 Push-button box with/without emergency stop

Smile 41 Push-button box with/without emergency stop Original instructions Smile 41 Push-button box with/without emergency stop ABB Jokab Safety Varlabergsvägen 11, 434 39 Kungsbacka www.abb.com/jokabsafety Read and understand this document Please read and

More information

Safety Limit Switch

Safety Limit Switch Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit

More information

Dimension A. Dimension B

Dimension A. Dimension B Slim Connector-Terminal lock Conversion Units CSM DS_E_2_2 New Slim Connector-Terminal lock Conversion Units. Mounting area reduced by 35% (in comparison with 40-pole XW2 Units) to contribute to downsizing

More information

Ordering Information. Long Barrel Inductive Prox. E2E2 2-Wire DC. Reduce Wiring to Control Devices with 2-Wire Inductive Prox Sensors

Ordering Information. Long Barrel Inductive Prox. E2E2 2-Wire DC. Reduce Wiring to Control Devices with 2-Wire Inductive Prox Sensors R Long Barrel Inductive Prox E2E2 2-Wire DC Reduce Wiring to Control Devices with 2-Wire Inductive Prox Sensors H Thick nickel-plated brass barrel for ruggedness H Solid potted internal circuitry withstands

More information

DIN Track Terminal Blocks with Screw Terminals XW5T

DIN Track Terminal Blocks with Screw Terminals XW5T New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes from 0.14 to 185

More information

Tina 10A/B/C Adaptor unit

Tina 10A/B/C Adaptor unit Original instructions Tina 10A/B/C Adaptor unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this

More information

EStrong-series Emergency Stop

EStrong-series Emergency Stop Original instructions EStrong-series Emergency Stop ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand

More information

D4BL. Guard Lock Safety-door Switch

D4BL. Guard Lock Safety-door Switch Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_7_1 Release Protective Cover Locks Using Controller Signals or Pushbutton Switches after the Cutting Tool Stops Moving Due to Inertia A mechanical lock

More information

Ordering Information. Long Barrel Inductive Prox E2E2 2-WIRE AC. Rugged Inductive Prox Sensors Meet IP67 Requirements

Ordering Information. Long Barrel Inductive Prox E2E2 2-WIRE AC. Rugged Inductive Prox Sensors Meet IP67 Requirements R Long Barrel Inductive Prox Rugged Inductive Prox Sensors Meet IP67 Requirements H Solid potted internal circuitry withstands shocks and water washdown to IP67 H Thick nickel-plated brass barrel has wrench

More information

D4BL. Guard Lock Safety-door Switch

D4BL. Guard Lock Safety-door Switch Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_5_1 Release Protective Cover Locks Using Controller Signals or Pushbutton Switches after the Cutting Tool Stops Moving Due to Inertia A mechanical lock

More information

Sensing & Safety GENERAL CATALOGUE 2004/2005

Sensing & Safety GENERAL CATALOGUE 2004/2005 GENERAL CATALOGUE 00/005 Sensing & Safety Photoelectric Sensors Displacement Sensors Vision Systems Safety Sensors Safety Switches Safety Relays Proximity Sensors Rotary Encoders Pressure Sensors Advanced

More information

Safety Guard Switching Unit G9SX-GS

Safety Guard Switching Unit G9SX-GS Enabling Grip Switch CSM DS_E_5_1 Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions The difficult task of configuring safety circuits is now easily achieved by combining the

More information

E2K-L. Liquid Level Sensor. Applications. Ordering Information

E2K-L. Liquid Level Sensor. Applications. Ordering Information Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing

More information

Applicable output load (See note 2.) Photocoupler Yes Yes 40 A at 110 to 220 VAC 5 to 24 VDC G3NB-240B 5 to 24 VDC G3NB-240B-UTU 5 to 24 VDC

Applicable output load (See note 2.) Photocoupler Yes Yes 40 A at 110 to 220 VAC 5 to 24 VDC G3NB-240B 5 to 24 VDC G3NB-240B-UTU 5 to 24 VDC Solid State Relays G3NB with 40-A output at a reasonable price. Switches 9 A without a heat sink. Zero cross function enables less noise operation. Built-in varistor effectively absorbs external surges.

More information

DIN Track Terminal Blocks with Screw Terminals

DIN Track Terminal Blocks with Screw Terminals New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal

More information

DIN Track Terminal Blocks with Screw Terminals XW5T

DIN Track Terminal Blocks with Screw Terminals XW5T New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal

More information

A22LK CSM_A22LK_DS_E_6_2

A22LK CSM_A22LK_DS_E_6_2 Guard Lock Safety Key CSM DS_E_6_2 The guard lock prevents accidental mode changes. for secure equipment activation during maintenance The guard lock of the Operation Unit prevents incorrect operation.

More information

FMC-1/2 Tina Muting unit

FMC-1/2 Tina Muting unit Original instructions FMC-1/2 Tina Muting unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this

More information

(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet

(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_6_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth

More information

Better Productivity by Standstill and Low-speed Monitoring

Better Productivity by Standstill and Low-speed Monitoring Better Productivity by Standstill and Low-speed Monitoring Standstill Monitoring Reduces Extra Waiting Time During Work Problem When a hazardous part has a long inertia, door-lock control using an off-delay

More information

Model Pressure range ON/OFF output Linear output

Model Pressure range ON/OFF output Linear output Digital Sensor Sensor with Easy-to-Read LED Display status can be checked at a glance from the red digital pressure value and analog bar displays. Measurement pressure is averaged by the chattering prevention

More information

Cylindrical Proximity Sensor

Cylindrical Proximity Sensor Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition

More information

D4NH. Safety-door Hinge Switch. Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment

D4NH. Safety-door Hinge Switch. Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Safety-door Hinge Switch CSM DS_E_4_1 Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Note: Contact your sales representative for details on models

More information

Miniature Limit Switches

Miniature Limit Switches (Horizontal) Plastic od 49.17.1* oller Lever 49.1.01.03 Miniature Limit witches 49 ealed oller Plunger 49 eries Miniature Limit witches Model election...1 Model Number tructure... Technical Data...3 pecification...4

More information

E bracket (see note 1) SPST-NO G7L-1A-TJ-CB G7L-1A-BJ-CB DPST-NO G7L-2A-T-CB G7L-2A-B-CB

E bracket (see note 1) SPST-NO G7L-1A-TJ-CB G7L-1A-BJ-CB DPST-NO G7L-2A-T-CB G7L-2A-B-CB General Purpose Relay G7L Ideally suited for high-inrush fluid pump controls: pool/spa, water processing, emergency, chemical industry, etc. High-capacity, high-withstand voltage relay with no contact

More information

D4BL. Guard Lock Safety-door Switch. Die-cast aluminum body Key holding force of 700 N. Model Number Structure. Model Number Legend Switch D4BL - K

D4BL. Guard Lock Safety-door Switch. Die-cast aluminum body Key holding force of 700 N. Model Number Structure. Model Number Legend Switch D4BL - K Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_10_1 Die-cast aluminum body Key holding force of 700 N Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.

More information

Proximity Sensors E-1. Standard E2E/E2EG E-2 Antispatter E2EQ E-32 Chemical Resistance E2FQ E-40. Cylindrical

Proximity Sensors E-1. Standard E2E/E2EG E-2 Antispatter E2EQ E-32 Chemical Resistance E2FQ E-40. Cylindrical Proximity Sensors Cylindrical Standard EE/EEG E- Antispatter EEQ E- Chemical Resistance EFQ E-0 Rectangular Subminiature ES E- Flat TL-W E-5 Standard TL-N E-60 Capacitive Liquid Level EK-L E-68 Long Distance

More information

2 to 25 A, 100 to 240 VAC G3PF-225B-STB Compact slotted

2 to 25 A, 100 to 240 VAC G3PF-225B-STB Compact slotted Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer

More information

E2E/E2EQ NEXT Series. Proximity Sensor. Long-distance Detection Prevents Unexpected Facility Stoppages. E2E/E2EQ NEXT Series Model Number Legend

E2E/E2EQ NEXT Series. Proximity Sensor. Long-distance Detection Prevents Unexpected Facility Stoppages. E2E/E2EQ NEXT Series Model Number Legend Proximity Sensor Long-distance Detection Prevents Unexpected Facility Stoppages The world's longest sensing distance* Nearly double the sensing distance of previous With high-brightness LED, the indicator

More information

Ordering Information. Long Barrel Inductive Prox E2E2 2-WIRE AC. Rugged Inductive Prox Sensors Meet IP67 Requirements

Ordering Information. Long Barrel Inductive Prox E2E2 2-WIRE AC. Rugged Inductive Prox Sensors Meet IP67 Requirements R Long Barrel Inductive Prox Rugged Inductive Prox Sensors Meet IP67 Requirements H Solid potted internal circuitry withstands shocks and water washdown to IP67 H Thick nickel-plated brass barrel has wrench

More information

Inductive Proximity Sensor

Inductive Proximity Sensor ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Inductive Proximity Sensor E2Q3 Square

More information

D4NH CSM_D4NH_DS_E_7_1

D4NH CSM_D4NH_DS_E_7_1 Safety-door Hinge Switch D4NH CSM_D4NH_DS_E_7_1 Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Lineup includes three contact models with 2NC/1NO

More information

Cylindrical type proximity sensor

Cylindrical type proximity sensor Cylindrical type Cylindrical type proximity Features Improved the noise resistance with dedicated IC Built-in reverse polarity protection circuit (DC 3-wire type) Built-in surge protection circuit Built-in

More information

Model Pressure range ON/OFF output Linear output

Model Pressure range ON/OFF output Linear output Authorised Distributors:- ASH & ALAIN INDIA PV LD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) el : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Digital Sensor Sensor

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor E2Q3 Square Proximity Sensor Terminal housing Integrated short circuit and reverse polarity protection Output function programmable by wiring Active face positioning: Y-axis

More information

LED Signal Towers. Pre-assembled and pre-cabled in different aperture to highlight the processes. Features/Unique selling proposition

LED Signal Towers. Pre-assembled and pre-cabled in different aperture to highlight the processes. Features/Unique selling proposition Pre-assembled and pre-cabled in different aperture to highlight the processes LED Signal Towers Modular and monolithic design are available. Patlite s extensive product range cover highly advanced LED

More information

DC2-Wire Unshielded Cylindrical Proximity Switches

DC2-Wire Unshielded Cylindrical Proximity Switches DC2-Wire Unshielded Cylindrical Proximity Switches FL7M Series Unshielded switches achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC2-wire

More information

Various applications. Robust housing. The GX-4S uses a robust stainless steel housing. The tightening torque can be 0.58 N m or less.

Various applications. Robust housing. The GX-4S uses a robust stainless steel housing. The tightening torque can be 0.58 N m or less. INUCTIVE SERIES Compact Inductive Proximity Sensor Flexible cable Metal embedding type available possible Amplifier Built-in High functionality together with robust housing and flexible cable GA-/GH -N

More information

Operation mode. Sensing distance N.O. N.C. N.O. N.C. N.O. N.C. 7mm

Operation mode. Sensing distance N.O. N.C. N.O. N.C. N.O. N.C. 7mm 6 Specifications FL7N/M Series DC 2-wire Type (shielded/unshielded) Cylindrical Proximity Sensors FEATURES Rigid Structure, Highly Water-proof DC 2-wire Type with Improved Visibility Indicator Lamps. DC

More information

MKey9-series Safety Interlock Switch with Guard Locking

MKey9-series Safety Interlock Switch with Guard Locking Original instructions MKey9-series Safety Interlock Switch with Guard Locking ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document

More information

Eden AS-i Proximity safety sensor

Eden AS-i Proximity safety sensor Original instructions Eden AS-i Proximity safety sensor ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand

More information

A4EG CSM_A4EG_DS_E_6_1

A4EG CSM_A4EG_DS_E_6_1 Enabling Grip Switch CSM DS_E_6_1 Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions In addition to the standard models, the lineup also includes models with an emergency stop

More information

AC/DC2-wire Type Cylindrical Proximity Switches

AC/DC2-wire Type Cylindrical Proximity Switches AC/DC2-wire Type Cylindrical Proximity Switches FL7M Series No-polarity 2-wire general-purpose switches are easy to use. 2-wire type for both AC and DC greatly reduces wiring man-hours Stable sensing area

More information

A22E. Emergency Stop Switch (22-dia./25-dia.) Install in 22-dia. or 25-dia. Panel Cutout. Model Number Structure L M 24A 01

A22E. Emergency Stop Switch (22-dia./25-dia.) Install in 22-dia. or 25-dia. Panel Cutout. Model Number Structure L M 24A 01 Emergency Stop Switch (-dia./5-dia.) CSM DS_E_5_ Install in -dia. or 5-dia. Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating errors.

More information

Cylindrical Proximity Sensor E2GN

Cylindrical Proximity Sensor E2GN New Product Cylindrical Proximity Sensor E2GN High quality at exceptional cost M12 and M18 models with standard sensing range. Ordering Information Shielded Non- Shielded Size M12 M18 M12 M18 Sensing Distance

More information

DC2-Wire Spatter-Guarded Cylindrical Proximity Switches

DC2-Wire Spatter-Guarded Cylindrical Proximity Switches DC-Wire Spatter-Guarded Cylindrical Proximity Switches FL7M Series A variety of anti-spatter measures make these switches the optimum for welding processes on the automotive production line. With Teflon

More information

High-power Solid State Relays G3PH

High-power Solid State Relays G3PH New Product News High-power Solid State Relays G3PH High-power, Load-control s with High Current of 75 or 150 A and High Voltage of 240 or 480 VAC RoHS compliant. Models also available with no zero cross.

More information

FL7M-A Series. Aluminum-chip Immunity DC 2-wire Type Cylindrical Proximity Sensors. Specifications. click FEATURES ORDER GUIDE

FL7M-A Series. Aluminum-chip Immunity DC 2-wire Type Cylindrical Proximity Sensors. Specifications. click FEATURES ORDER GUIDE 6 FL7M-A Series FEATURES Workpieces Reliably Sensed Even if Aluminum or Cast Iron Chips Accumulate on the Sensing Head. This DC 2-wire type proximity sensor can be directly connected to programmable controllers

More information

CSM_D4N-_R_DS_E_6_1

CSM_D4N-_R_DS_E_6_1 Pull-reset Safety Limit Switch D4N-@R CSM_D4N-_R_DS_E_6_1 A Series of Pull-reset s Now Available Note: Contact your sales representative for details on models with safety standard certification. Lineup

More information

GX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.

GX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space. DC 2-wire Cylindrical Inductive Proximity SERIES High performance & ease of use Amplifier Built-in Robust in tightening The tightening torque has been improved to approx. four times greater than that of

More information

A3S. Pushbutton Switch Series with Square 40-mm Body. Lighted Pushbutton Switch (Square) List of Models

A3S. Pushbutton Switch Series with Square 40-mm Body. Lighted Pushbutton Switch (Square) List of Models Lighted Pushbutton Switch (Square) CSM DS_E_7_ Pushbutton Switch Series with Square 40-mm Body Combines miniature design with distinct but soft sense of operation. Easy panel mounting from the front and

More information

Sensing distance. 4mm. 4mm. 7mm. 12mm. 20mm

Sensing distance. 4mm. 4mm. 7mm. 12mm. 20mm DC2-wire Square Proximity Sensors FL2R/SSeries This DC2-wire Square Proximity sensor Can Be Directly Connected to Programmable Controllers and Units. Wide Range of Models Available. Reduced wiring costs

More information

DC 2-Wire Unshielded Cylindrical Proximity Sensors. Operation mode. Setting indicator N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. 20mm N.O. N.O. N.O.

DC 2-Wire Unshielded Cylindrical Proximity Sensors. Operation mode. Setting indicator N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. 20mm N.O. N.O. N.O. DC 2-Wire Unshielded Cylindrical Proximity Sensors FL7MSeries Unshielded sensors achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC 2-wire

More information

* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue.

* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue. Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : -7977 Fax : -7977 E-mail : sales@ashalain.com Sensor Four-Input-Channel Sensor

More information