Rectangular-shaped Inductive Proximity Sensor.
|
|
- Valentine Michael Henry
- 5 years ago
- Views:
Transcription
1 69 PHOTO PHOTO Rectangular-shaped Inductive Proximity Sensor -F/H SERIES Related Information Amplifi er General terms and conditions... P.1 Sensor selection guide...p.11~ / P.67~ Glossary of terms... P.19 ~ General precautions... P.11 ~ Conforming to EMC Directive PARTICUAR MEASURE CONTRO SUNX website PNP output type available Oil resistant Different freq. type available Industry No. 1* in stable sensing * Based on research conducted by SUNX as of August 7 among equivalent rectangular inductive sensors. Can be installed with ample space This sensor has the longest stable sensing range among the same level of rectangular inductive proximity sensors in the industry. It is easy to install the sensor. -F/H separated - 8:.1 mm.83 in (Maximum operation distance:.5 mm.98 in) Stable sensing range.5 mm.98 in.5 mm.98 in Variation at the maximum operation distance is within ±8 % Temperature characteristics vary within ±8 % Thorough adjustment and control of sensing sensitivity greatly reduces individual sensor differences and variations. The work of adjusting sensor positions when using multiple sensors and when sensors have been replaced is much easier.. mm.16 in or less.1 to mm.83 to in 1.8 to mm.71 to in Standard sensing object 6% less 1. mm.39 in or less Operation distance variation:. mm.16 in or less* Maximum operation distance:.5 mm.98 in ± 8 % (.3 to.7 mm.91 to.16 in) Operation distance variation: 1. mm.39 in or less - 8 Standard sensing object Maximum operation distance:.5 mm.98 in ± % (. to 3. mm to.118 in) * Not including temperature characteristics. - 1 has a variation of.6 mm.5 in or less for a maximum operation distance of mm.158 in Previous model For the - 8 Previous model - 1: 3.3 mm.13 in (Maximum operation distance:. mm in). mm in. mm in Components such as the sensor coil and core and product design have been totally revised to provide excellent temperature characteristics. Stable sensing can be obtained regardless of the time of day or the yearly season. Rate of variation in sensing range [%] Stable sensing range 3.3 to mm.13 to in 3. to mm.118 to in C 73 F Ambient temperature [ C F] -F/H series Previous models range within temperatures of 5 to +7 C ( 13 to +158 F) are within ±8 % of the range at +3 C (+73 F) Previous models: ( within +15 % ) 1 * Typical - 1 Previous model
2 Rectangular-shaped Inductive Proximity Sensor ORDER GUIDE SPECIFICATIONS I/O CIRCUIT DIAGRAMS P.651 P.65~ P.65 SENSING CHARACTERISTICS PRECAUTIONS FOR PROPER P.65 P.655 -F/H SERIES DIMENSIONS 65 P.656 APPICATIONS Muting control of light curtains Positioning processing equipment Positioning metal pallets PHOTO PHOTO ENVIRONA RESISTANCE PARTICUAR 1 times the durability! (Compared to previous models) The new integrated construction method used provides shock resistance of 1, m/s (approx. 1, G in X, Y and Z directions for three times each), and vibration resistance clears durability tests of between 1 and 5 Hz (3mm.118 in amplitude in X, Y and Z directions for hours each). In addition, resistance to impulse noize is approx. three times greater than for previous models. Checking up / down operation of compact molding equipment MEASURE presence of metallic objects on a part feeder CONTRO Shock resistance: 1, G Highly resistant to water or oil! IP68g* protective construction The new integrated construction method used improves environmental resistance performance. The IP68g prevents damage to the sensor by stopping water and oil getting inside. Vibration resistance: 5 Hz FUNCTIONS Indicators are easy to see over a wide field of view A prism with a wide field of view has been developed. This has greatly improved the visibility of the operation indicators. -H -F/H -F//H * For details, refer to the Specifications (p.65~) -F separated MOUNTING Tightening strength increased with no damage! Conductor thickness doubled to make wiring much easier! (- 8 only) A metal sleeve has been inserted. It is possible to tighten up to.7 N m *. The conductor s thickness was doubled for the - 8. This makes it easier to handle and perform crimping work on the cables. In addition, the tensile strength of the crimping area has become higher. * Maximum tightening torque for M3 screw. Tightening torque:.7 N m.8mm Previous model.15mm - 8 sleeve Approx. 1. times greater than before Conductor thickness approx. times greater
3 651 Rectangular-shaped Inductive Proximity Sensor -F/H SERIES PARTICUAR CONTRO ORDER GUIDE -8 type Type Appearance (mm in) range (Note 1) NPN output Top sensing Front sensing PNP output Top sensing Front sensing Maximum operation distance.5 mm.98 in ( to.1 mm to.83 in) Stable sensing range Model No. (Note ) -F8A -F8AI -F8B -F8BI -H8A -H8AI -H8B -H8BI -F8A-P -F8AI-P -F8B-P -F8BI-P -H8A-P -H8AI-P -H8B-P -H8BI-P Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fl uctuation. ) I in the model No. indicates a different frequency type. Output NPN open-collector transistor PNP open-collector transistor Output operation -1 type Type Appearance (mm in) range (Note 1) Model No. (Note ) Output Output operation -F/H separated NPN output Top sensing Front sensing PNP output Top sensing Front sensing Maximum operation distance. mm in ( to 3.3 mm to.13 in) Stable sensing range -F1A -F1AI -F1B -F1BI -H1A -H1AI -H1B -H1BI -F1A-P -F1AI-P -F1B-P -F1BI-P -H1A-P -H1AI-P -H1B-P -H1BI-P NPN open-collector transistor PNP open-collector transistor Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fl uctuation. ) I in the model No. indicates a different frequency type.
4 Rectangular-shaped Inductive Proximity Sensor -F/H SERIES 65 Designation Model No. Description Sensor mounting bracket MS-8- Mounting bracket for -8 type Sensor mounting bracket MS-8-1 pc. each of M3 (length: 1 mm.7 in) truss head screw, nut, spring washer and plain washer is attached. SPECIFICATIONS -8 type Model No. (Note ) Type NPN output PNP output Front sensing -F8A(I) -F8B(I) -F8A(I)-P -F8B(I)-P Item Top sensing -H8A(I) -H8B(I) -H8A(I)-P -H8B(I)-P Max. operation distance (Note 3).5 mm.98 in ± 8 % Stable sensing range (Note 3) to.1 mm to.83 in Standard sensing object Iron sheet t 1 mm t.39 in Hysteresis % or less of operation distance (with standard sensing object) Repeatability Along sensing axis, perpendicular to sensing axis:. mm. in or less Supply voltage 1 to V DC % Ripple P-P 1 % or less Current consumption 15 ma or less PARTICUAR CONTRO Output Utilization category NPN open-collector transistor Maximum sink current: 1 ma Applied voltage: 3 V DC or less (between output and V) Residual voltage: 1 V or less (at 1 ma sink current). V or less (at 16 ma sink current) DC-1 or DC-13 PNP open-collector transistor Maximum source current: 1 ma Applied voltage: 3 V DC or less(between output and +V) Residual voltage: 1 V or less (at 1 ma source current). V or less (at 16 ma source current) Output operation Max. response frequency 5 Hz Orange ED (lights up when the output is ON) Pollution degree 3 (Industrial environment) Environmental resistance Protection IP68 (IEC), IP68g (JEM) (Refer to p.11 for details of standards.) (Note, 5) Ambient temperature 5 to +7 C 13 to +158 F, Storage: to +85 C to +185 F Ambient humidity 5 to 85 % RH, Storage: 35 to 95 % RH EMC EN Voltage withstandability 1, V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 5 MΩ, or more, with 5 V DC megger between all supply terminals connected together and enclosure Vibration resistance 1 to 5 Hz frequency, 3 mm.118 in amplitude in X, Y and Z directions for two hours each -F/H separated range variation Material Shock resistance 1, m/s acceleration (1, G approx.) in X, Y and Z directions for three times each Temperature characteristics Over ambient temperature range 5 to +7 C 13 to +158 F: Within ± 8 % of sensing range at +3 C +73 F Voltage characteristics Within ± % for % fl uctuation of the supply voltage Enclosure: PBT, Indicator part: Polyester Cable Cable extension.15 mm 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.81 ft long Extension up to total 1 m 38.8 ft is possible with.3 mm, or more, cable. Net weight Front sensing type: 15 g approx., Top sensing type: g approx.. Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +3 C +73. F. ) I in the model No. indicates a different frequency type. 3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fl uctuation. ) SUNX s IP68 test method 1 Immerse at m below C +3 F water surface and leave for 3 min. Then, immerse at m below +7 C +158 F water surface and leave for 3 min. Regard the heat shock test in 1 as one cycle and perform cycles. 3 eave in water at a depth of 1 m 3.81 ft in water for 5 hours. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values. 5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may deteriorate due to added substances in the oil.
5 653 Rectangular-shaped Inductive Proximity Sensor -F/H SERIES PARTICUAR CONTRO -F/H separated Model No. (Note ) Type NPN output PNP output Front sensing -F1A(I) -F1B(I) -F1A(I)-P -F1B(I)-P Item Top sensing -H1A(I) -H1B(I) -H1A(I)-P -H1B(I)-P Max. operation distance (Note 3). mm.158 in ± 8 % Stable sensing range (Note 3) to 3.3 mm to.13 in Standard sensing object Iron sheet t 1 mm t.39 in Hysteresis % or less of operation distance (with standard sensing object) Repeatability Along sensing axis, perpendicular to sensing axis:. mm. in or less Supply voltage 1 to V DC % Ripple P-P 1 % or less Current consumption 15 ma or less Output NPN open-collector transistor Maximum sink current: 1 ma Applied voltage: 3 V DC or less (between output and V) Residual voltage: 1 V or less (at 1 ma sink current). V or less (at 16 ma sink current) PNP open-collector transistor Maximum source current: 1 ma Applied voltage: 3 V DC or less(between output and +V) Residual voltage: 1 V or less (at 1 ma source current). V or less (at 16 ma source current) Utilization category DC-1 or DC-13 Output operation Max. response frequency 5 Hz Orange ED (lights up when the output is ON) Pollution degree 3 (Industrial environment) Protection IP68 (IEC), IP68g (JEM) (Refer to p.11 for details of standards.) (Note, 5) Ambient temperature 5 to +7 C 13 to +158 F, Storage: to +85 C to +185 F Ambient humidity 5 to 85 % RH, Storage: 35 to 95 % RH EMC EN Voltage withstandability 1, V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 5 MΩ, or more, with 5 V DC megger between all supply terminals connected together and enclosure Vibration resistance 1 to 5 Hz frequency, 3 mm.118 in amplitude in X, Y and Z directions for two hours each Shock resistance 1, m/s acceleration (1, G approx.) in X, Y and Z directions for three times each Environmental resistance SPECIFICATIONS -1 type range variation Material Cable Cable extension Net weight Temperature characteristics Over ambient temperature range 5 to +7 C 13 to +158 F: Within ±8 % of sensing range at +3 C +73 F Voltage characteristics Within ± % for % fl uctuation of the supply voltage Enclosure: PBT, Indicator part: Polyester.15 mm 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.81 ft long Extension up to total 1 m 38.8 ft is possible with.3 mm, or more, cable. Front sensing type: g approx., Top sensing type: g approx.. Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +3 C +73. F. ) I in the model No. indicates a different frequency type. 3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fl uctuation. ) SUNX s IP68 test method 1 Immerse at m below C +3 F water surface and leave for 3 min. Then, immerse at m below +7 C +158 F water surface and leave for 3 min. Regard the heat shock test in 1 as one cycle and perform cycles. 3 eave in water at a depth of 1 m 3.81 ft in water for 5 hours. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values. 5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may deteriorate due to added substances in the oil.
6 Rectangular-shaped Inductive Proximity Sensor -F/H SERIES 65 I/O CIRCUIT DIAGRAMS - NPN output type - -P PNP output type Sensor circuit ZD1 Tr D ZD Internal circuit Color code (Brown) +V (Black) Output (Note) (Blue) V Users circuit oad 1 ma max. + 1 to V DC % Note: The output does not incorporate a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Symbols D : Reverse supply polarity protection diode ZD1, ZD: Surge absorption zener diode Tr : NPN output transistor Sensor circuit Tr ZD 1 ma max. D Internal circuit Color code (Brown) +V (Black) Output (Note) (Blue) V Users circuit oad Note: The output does not incorporate a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Symbols D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor + 1 to V DC % PARTICUAR Setting distance (mm in) SENSING CHARACTERISTICS (TYPICA) -8 type field Standard sensing object Standard sensing object Iron sheet t 1 mm Iron sheet t 1 mm t.39 in t.39 in l l Front sensing Top sensing range (mm in) Correlation between sensing object size and sensing range object a a mm a a in t 1 mm t.39 in Top sensing Front sensing Stainless steel (SUS3) object a a mm a a in t 1 mm t.39 in Iron Brass Aluminum As the sensing object size becomes smaller than the standard size (iron sheet t 1 mm t.39 in), the sensing range shortens as shown in the left fi gures. CONTRO Setting distance (mm in) eft Center Right Operating point l (mm in) -1 type field Standard sensing object Standard sensing object Iron sheet t 1 mm Iron sheet t 1 mm t.39 in t.39 in l l 6.36 Top sensing Front sensing range (mm in) object side length a (mm in).787 Correlation between sensing object size and sensing range object a a mm a a in 6 Front sensing.36 t 1 mm t.39 in object a a mm a a in t 1 mm Top sensing t.39 in Iron Stainless steel (SUS3) Brass Aluminum As the sensing object size becomes smaller than the standard size (iron sheet t 1 mm t.39 in), the sensing range shortens as shown in the left fi gure. -F/H separated eft Center Right Operating point l (mm in) object side length a (mm in) 1.575
7 655 Rectangular-shaped Inductive Proximity Sensor -F/H SERIES PARTICUAR CONTRO -F/H separated PRECAUTIONS FOR PROPER Mounting -8 type Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Make sure to use a M3 (length: 1 mm.7 in or more) truss head screw. The tightening torque should be.7 N m or less. Do not use a fl at head screw or a pan head screw. -1 type The tightening torque should be.7 N m or less. To mount the sensor with a nut, the mouting hole diameter should be ø3. mm ø.13 in. Further, the hole in which the boss is inserted should be ø.5 mm ø.98 in and 3 mm.118 in, or more, deep. Influence of surrounding metal When there is a metal near the sensor, keep the minimum separation distance specified below. A Front sensing type -F8 -F1 Top sensing type B E D F C G G C M3 (length 1 mm.7 in) truss head screw(accessory for MS-8-) M3 (length 1 mm.7 in or more) pan head screw (Please arrange separately.) A 7. mm.91 in 7.1 mm.8 in B 8 mm.315 in mm.787 in C 3 mm.118 in 7 mm.76 in -H8 MS-8- (Accessory) M3.5 mm. in tapped hole (Depth: 8 mm.315 in or more) or ø3. mm ø.13 in thru-hole 11.5 mm.53 in If mounting using nut and washers (Accessories for MS-8-) ø. mm ø.98 in hole (Depth: 3 mm.315 in or more) M3.5 mm. in tapped hole (Depth: 1 mm.39 in or more) or ø3. mm ø.13 in thru-hole 16 mm.63 in If mounting using nut and washers (Please arrange separately.) ø.5 mm ø.98 in hole (Depth: 3 mm.118 in or more) -H1 D mm in 7 mm.76 in E 1 mm.39 in mm.787 in F 3 mm.118 in 3 mm.118 in G 3 mm.118 in 3 mm.118 in Mutual interference prevention Refer to p.11 ~ for general precautions. When two or more sensors are installed in parallel or face to face, keep the minimum separation distance specifi ed below to avoid mutual interference. -F8 -H8 -F1 -H1 Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types H J mm 15 mm (Note ).591 in mm 35 mm.787 in in mm 15 mm (Note ).591 in mm 35 mm.787 in in mm 5 mm (Note ).98 in 5 mm 5 mm.98 in in Notes: 1) I in the model No. specifi es the different frequency type. ) Close mounting is possible for up to two sensors. When mounting three sensors or more at an equal spacing, align the model with I and the model without I alternately. The minimum value of dimension H should be as given below. -8 type: 6mm.36 in -1 type: 6.5mm.56 in Front sensing H H Top sensing range The sensing range is specifi ed for the standard sensing object. With a non-ferrous metal, the sensing range is obtained by multiplying with the correction coeffi cient specifi ed below. Further, the sensing range also changes if the sensing object is smaller than the standard sensing object or if the sensing object is plated. Correction coefficient Model No. -8 type -1 type Iron 1 1 Stainless steel (SUS3).76 approx..79 approx. Brass.5 approx..56 approx. Aluminum.8 approx..53 approx. s The output does not incorporate a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Do not use during the initial transient time (5 ms) after the power supply is switched on. H J J
8 Rectangular-shaped Inductive Proximity Sensor -F/H SERIES 656 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: -F8 Sensor -H8 Sensor F direction ø9 ø.35 ø3.1 ø.1 mounting hole ø3 ø.118 cable, 1 m 3.81 ft long ø1.5 ø ø6 ø.36 screw seat,.8.3 deep direction ø3.1 ø.1 mounting hole ø3 ø.118 cable, 1 m 3.81 ft long ø.3 ø (Orange) Sensor (Orange) H (Orange) ø.3 ø.91 direction R R direction R6.5 R (Orange) ø3.1 ø.1 mounting hole ø3 ø.118 cable, 1 m 3.81 ft long Sensor ø3 ø.118 cable, 1 m 3.81 ft long ø3.1 ø.1 mounting hole ø6 ø.36 screw seat, deep PARTICUAR CONTRO MS (16.) 15.8 (.638) (11.5) 3.3 (.53) ø3.1 ø.1 hole t. t.16 Sensor mounting bracket for -8 type (optional) Mounting hole dimensions Center of sensing ø. ø.9 hole, or more deep M3.5. tapped hole, or more deep -F/H separated Material: Stainless steel (SUS3) 1 pc. each of M3 (length 1 mm.7 in) truss head screw, nut, spring washer and plain washer are attached.
GXL SERIES. High performance in micro-size design. Micro-size Inductive Proximity Sensor PROXIMITY SENSORS INDUCTIVE. Wide model variety
SERIES Micro-size Inductive Proximity -wire available PNP output Oil resistant Flexible cable Different freq. available available available Amplifier Built-in High performance in micro-size design GA-/GH
More informationGL-6 SERIES. Miniature Inductive Proximity Sensor. High Performance in Surprisingly Small Body. Marked. Extremely Small.
G- SERIES Miniature Inductive Proximity Sensor High Performance in Surprisingly Small Body Marked Conforming to EMC Directive Extremely Small Mountable in a tight space as the sensor is just 19mm in volume.
More informationVarious applications. Robust housing. The GX-4S uses a robust stainless steel housing. The tightening torque can be 0.58 N m or less.
INUCTIVE SERIES Compact Inductive Proximity Sensor Flexible cable Metal embedding type available possible Amplifier Built-in High functionality together with robust housing and flexible cable GA-/GH -N
More informationGXL SERIES. Micro-size Inductive Proximity Sensor. High Performance in Micro-size Design. Marked. Versatile Mounting. Wide Model Variety
GX SERIES AUDIN Composants & systèmes d'automatisme avenue de la malle - 17 St Brice Courcelles - France Tel. +()61 Fax +()6 http://www.audin.fr e-mail info@audin.fr Micro-size Inductive Proximity High
More informationGXL SERIES. Micro-size Inductive Proximity Sensor. High Performance in Micro-size Design. Marked. Wide Model Variety. Versatile Mounting
GX SERIES Micro-size Inductive Proximity High Performance in Micro-size Design Marked Conforming to EMC Directive Wide Model Variety Models ranging from extremely compact to long range are available to
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES High performance & ease of use Amplifier Built-in Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More informationFeatures. 2-wire type available. Max. operation distance: 1.5 mm 0.06 in (Stable sensing range 0 to 1.2 mm 0.05 in)
817 Cylindrical Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.1576~ guide... P.781~ General precautions... P.1579~ PHOTO PHOTO panasonic.net/id/pidsx/global
More informationCompact Inductive Proximity Sensor. onlinecomponents.com. Various Applications
INUCTIVE SERIES Compact Inductive Proximity -N -U G-8H/8H G-N G-8U G-6 Miniature -S is an amplifier built-in inductive proximity sensor having a diameter of just ".8mm. -S ".8mm Various Applications The
More informationGX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space. GX-12ML(B) Conventional model
SERIES DC -wire Cylindrical Inductive Proximity High Performance & Ease of Use Marked Conforming to EMC Directive Robust in Tightening The tightening torque has been improved to approx. four times greater
More informationCompact Size: "5.4mm. GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space.
INDUCTIVE SERIES DC -wire Cylindrical Inductive Proximity G-8H/8H G-N G-8U G-6 Robust in Tightening The tightening torque has been improved to approx. four times greater than that of conventional models
More informationGH-5S. 5.6 times approx. Tightening torque 0.78N m or less. Disconnection Alarm Indicator
GA- SERIES Amplifier-separated Micro-size Inductive Proximity Sensor GH SERIES -N -U Slim & Small The amplifier is extremely slim, just mm thick. This results in a compact size even if several amplifiers
More informationAdjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
3 Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.549~ guide... P.3~ General precautions... P.55~ PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationCompact Size: "5.4mm. GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space.
SERIES DC -wire Cylindrical Inductive Proximity High Performance & Ease of Use Marked Conforming to EMC Directive Robust in Tightening The tightening torque has been improved to approx. four times greater
More informationMicro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES
MODE 751 Micro-differential Pressure High-precision Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1469 ~ Sensor selection guide...
More informationMicro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES
MODE 729 Micro-differential Pressure High-precision Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1563~ guide... P.699~ General precautions...
More informationCylindrical Inductive Proximity Sensor GX-M SERIES
Cylindrical Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Features Wide product range Types: DC 3-wire shielded type DC 3-wire non-shielded type DC 2-wire standard type DC
More informationHigh-speed detection even a little liquid leak
737 Leak Sensor Related Information Amplifier Built-in EX-F70 SERIES SERIES Sensor selection guide...p.11~ / P.77~ General terms and conditions...p.1 General precautions...p.986~ PHOTO PHOTO Conforming
More informationHead-separated Digital Pressure Sensor DP5 SERIES DPH SERIES
76 ORDER GUIDE DP / configuration diagram Intermediate cable s Type Vacuum pressure Positive pressure Compound pressure Appearance An intermediate cable is required to connect the controller and the sensor
More informationSimple Pressure Level Setting. The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level.
SERIES LED Bar Display Mechanical Switch is Out of Date Choose the Contemporary Pressure Sensor with LED Bar Display Marked Conforming to EMC directive Bright LED Bar Display Easy to read the pressure
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
11 High Accuracy ddy Current Type Sensor SRIS Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General precautions... P.1501 PHOTO PHOTO
More informationNot affected by drops, bubbles or froth
PARTICULAR USE SENSORS SERIES Sensor Detects water...reliably! Strong penetration power Not affected by drops, bubbles or froth Conforming to EMC Directive UL Recognition (Excluding m cable length type)
More informationTL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information
Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page
More informationCylindrical Sensors CY-100 SERIES panasonic-electric-works.net/sunx. Cylindrical Inductive Proximity Sensor GX-M SERIES.
Cylindrical Sensors Photoelectric Sensor CY-100 SERIES Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Cylindrical Inductive Proximity Sensor GX-M SERIES Cylindrical Photoelectric
More informationEX-F70 SERIES EX-F60 SERIES
85 Leak Sensor Related Information Amplifier Built-in EX-F70 SERIES SERIES General terms and conditions... F-17 General precautions... P.105 Sensor selection guide... P.81~ Korea s S-mark... P.110 PHOTO
More informationInductive Proximity Sensor
Inductive Proximity Sensor General-purpose Type in a Basic Switch Housing Mounting pitch compatible with that of mechanical basic switch. Wide operating voltage range: 10 to 30 VDC or 90 to 250 VAC. LED
More informationGXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation
777 PHOTO PHOTO DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F-17 Gossary of terms... P.16~ seection guide... P.77~ Genera precautions... P. Conforming
More informationGXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting
1 DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F- Gossary of terms... P.176~ guide... P.71~ Genera precautions... P.179~ PHOTO PHOTO IGHT FOW PARTICUAR
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor E2E2 Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility. A milled
More informationE2EZ-X2D1-N E2EZ-X2D2-N
Chip-immune Inductive s Detects Objects without Being Influenced by Aluminum or Iron Chips Series now includes M s. s also available. CE Marking for DC -Wire and DC -Wire s. Be sure to read Safety Precautions
More informationCX-20. General Purpose Photoelectric Sensor with Full Basic Performance. SERIES Amplifier Built-in Compact Photoelectric Sensor PHOTOELECTRIC SENSORS
SERIES Amplifier Built-in Compact Photoelectric FX-D/A/M FX-A FX- Fiber s General Purpose Photoelectric with Full Basic Performance FZ- Compact Size Two s Mountable Together Waterproof Just mm in depth,
More informationSupply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz
R Pancake Style Inductive Prox Long-Range Proximity Sensor Detects Metal Objects at 50 mm H Ideal for many industrial automation applications H Choose DC 3 -wire or AC 2 -wire models H Rugged die -cast
More information2 Window comparator mode. Hysteresis Hysteresis
SERIES High-performance Digital Pressure Sensor Digital Automatic sensitivity setting With analog output Complete functionality! Selection from a wide lineup DP3 * UL 61010C-1 compatible, Passed the UL
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.
More information2.5 mm. (0.10 in) E2S -Q25 E2S -Q26. Output configuration. 2.5 mm. End face E2S -W15 E2S -W16 End face PNP
Subminiature Rectangular Inductive Prox World s Smallest Square Sensor with Built-in Amplifier H. x. mm type allows smaller, space-saving machines and devices H High response frequency ( khz) for fast
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space
More informationSERIES LED Display Digital Pressure Sensor. Clearly Visible LED Display with 3 1 /2 Digits
SERIES LED Display Digital Pressure Sensor PE DP-M DP-Y DP3 High Accuracy High Resolution High Speed It achieves a 2.5ms, or less, response time at a high resolution of 1/1,000. It enables highly accurate
More informationPX-2 SERIES. onlinecomponents.com. Compact size sensor realizes wide sensing area & long sensing range. Long Range & Wide Area Photoelectric Sensor
EQ- VF NX PM PM MS-J RT- CY POTOEECTRIC SENSORS SERIES ong Range & Wide rea Photoelectric Sensor Ideal area with very little null zone The advanced optical system of the series reduces the null zones in
More informationEX-F70 SERIES EX-F60 SERIES
877 Leak Sensor Amplifier Builtin EXF70 SERIES SERIES Related Information General terms and conditions... F General precautions... P.155~ guide... P.865~ Korea s Smark... P.160 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationSERIES LED Display Digital Pressure Sensor. Clearly Visible LED Display with 3 1 /2 Digits
SERIES LED Display Digital Pressure Sensor Complete Functionality from a Wide Model Line-up Marked Conforming to EMC Directive High Accuracy High Resolution High Speed It achieves a 2.5ms, or less, response
More informationDigital Pressure Sensor with Auto-reference Function. Example of air-leak test. Threshold level. Reference pressure. Reference pressure
SERIES Digital ure Sensor with Auto-reference Function Digital Auto reference High accuracy sensing at all times with autoreference function * UL 61010C-1 compatible, Passed the UL 991 Environment Test
More informationIndicators reveal the sort of an abnormal condition. Emitter Emitting Controller Power indicator
AREA SENSOR SERIES mm Beam Pitch NA1-5 NA2 SF1-F NA40 SF1-N SF1-A Slim Body Fail-safe esign For General Use Supreme Fail-safe esign The system always check there is no internal circuit, no cable breakage,
More informationConstruction diagram Semiconductor transducer Silicone oil. Stainless steel SUS316 pressure port Hastelloy C diaphragm.
SERIES LED Display Anti-corrosive Digital ure Sensor DP3 ure Measurement of Corrosive Gases and Liquids Possible! Marked Conforming to EMC Directive Superior Anti-corrosive Hastelloy C Diaphragm and Stainless
More informationBasic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing
R Basic Switch Style Inductive Prox General-purpose Inductive Prox in a Basic Switch Housing H Mounting pitch compatible with that of a mechanical basic switch H Wide operating voltage range: 10 to 30
More informationHigh-frequency AC Method. panasonic-electric-works.net/sunx
1091 PHOTO PHOTO Thin Type Ionizer High-frequency AC Method General terms and conditions... F-17 Related Information Glossary of terms... P.1401 guide... P.1075~ General precautions... P.1405 Conforming
More informationSuper fast 1 ms Convenient intermediate cable with connector A total of 10 head variations
SERIES Digital Sensor Digital Automatic sensitivity setting Auto reference With analog output /, sec. The fastest response in the industry DP DP Conforming to EMC Directive UL Recognition Super fast ms
More informationAC/DC2-wire Type Cylindrical Proximity Switches
AC/DC2-wire Type Cylindrical Proximity Switches FL7M Series No-polarity 2-wire general-purpose switches are easy to use. 2-wire type for both AC and DC greatly reduces wiring man-hours Stable sensing area
More informationE2K-L. Liquid Level Sensor. Applications. Ordering Information
Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing
More informationA New Global Standard
PRESSURE SENSOR DIGITAL PRESSURE SENSOR DP- SERIES Conforming to EMC Directive Recognition Certification [DP-(A)/(A) only] A New Global Standard Dual display for the digital pressure sensors of the future
More informationDC2-Wire Unshielded Cylindrical Proximity Switches
DC2-Wire Unshielded Cylindrical Proximity Switches FL7M Series Unshielded switches achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC2-wire
More informationDC 2-Wire Unshielded Cylindrical Proximity Sensors. Operation mode. Setting indicator N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. 20mm N.O. N.O. N.O.
DC 2-Wire Unshielded Cylindrical Proximity Sensors FL7MSeries Unshielded sensors achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC 2-wire
More informationProximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1
Proximity Sensor A Series of Spatter-preventing Proximity Sensors with a Teflon-coated Metal Housing Teflon*-coated metal housing endures high tightening torque. Pre-wired and plug-in models are available.
More informationDP5/DPH. Head Separated Digital Pressure Sensor. 1/1000 Second High-Speed Response. The advantage of the fastest response in the industry SERIES
Head Separated Digital Pressure Sensor SERIES /000 Second High-Speed Response Conforming to EMC Directive UL Recognition /,000 sec. The advantage of the fastest response in the industry 55 High speed in
More informationCorrection Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
PRODUCT NEWS Correction Reissue Product Discontinuation Notices Proximity Sensors Issue Date August 4, 2014 No. 2014038CE(3) Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
More informationFL7MSeries. DC2-Wire Regular Cylindrical Proximity Sensors
DC-Wire Regular Cylindrical Proximity Sensors FL7MSeries Rigid structure, highly waterproof DC -wire sensors with improved visibility of lamps. DC -wire, for reduced wiring costs. Stable sensing area is
More informationCylindrical type proximity sensor
Cylindrical type Cylindrical type proximity Features Improved the noise resistance with dedicated IC Built-in reverse polarity protection circuit (DC 3-wire type) Built-in surge protection circuit Built-in
More information2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm
Compact Square Inductive Proximity Sensor World s Smallest Square Sensor with uilt -in Amplifier 5.5 x 5.5 mm type contributes to smaller, space-- saving machines and devices. Comprehensive range; sensing
More informationTL-N7MD1 7mm(0.28 in) NC. 12 mm (0.47 in)
R Rectangular Inductive Prox Space-Saving Sensors for a Wide Range of Applications H Switches loads up to 200 ma H Easy to install DC 2-wire models reduce wiring H DC 3-wire models available with high-flexibility
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.
More informationAPS-10 to 15 Series. PBT Resin Square Type, 2-wire/3-wire DC System. Type. Proximity Sensor. Features
Series Features PBT Resin, -wire/-wire DC System - Front/Upper/Side surface detection - High reliability based on long history of various adoptions - / NPN output Type DC Type/-wire DC System Form Form
More informationModel Pressure range ON/OFF output Linear output
Digital Sensor Sensor with Easy-to-Read LED Display status can be checked at a glance from the red digital pressure value and analog bar displays. Measurement pressure is averaged by the chattering prevention
More informationDC2-Wire Spatter-Guarded Cylindrical Proximity Switches
DC-Wire Spatter-Guarded Cylindrical Proximity Switches FL7M Series A variety of anti-spatter measures make these switches the optimum for welding processes on the automotive production line. With Teflon
More informationA Metal Head That's. Highly Durable and Provides Long-distance Detection. mm 7(M18 Model) Proximity Sensor with All-stainless Housing E2EF NEW
NEW Proximity Sensor with All-stainless Housing EEF Standard Model (Completely stainless- housing) A Metal Head That's * Highly Durable and Provides Long-distance Detection mm 7(M18 Model) *More than 0
More informationSA1W: Water Detection Sensors SA1W-FN1 SA1W-FN2 SA1W-FP1 SA1W-FP2
The SA1W is the fastest, most reliable liquid detection sensor on the market. Using a laser beam tuned to the resonant frequency of an H 2 O molecule, the SA1W is able to detect any liquid containing water
More informationOperation mode. Sensing distance N.O. N.C. N.O. N.C. N.O. N.C. 7mm
6 Specifications FL7N/M Series DC 2-wire Type (shielded/unshielded) Cylindrical Proximity Sensors FEATURES Rigid Structure, Highly Water-proof DC 2-wire Type with Improved Visibility Indicator Lamps. DC
More informationTECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS YAMATAKE PROXIMITY SENSOR CATEGORIES
TECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS "" includes all sensors that detect the presence of a metallic object approaching the sensing face or near the sensing face without mechanical contact.
More informationE2Q6. Rectangular Proximity Sensor. Freely Change the Sensing Direction. Ordering Information. Sensors [Refer to Dimensions on page 6] DC Models
Rectangular Freely Change the Sensing Direction Change between any of five sensing directions: front or 9 up, down, left, or right. Four indicators show the operating status of the from many directions.
More informationSensing distance. 4mm. 4mm. 7mm. 12mm. 20mm
DC2-wire Square Proximity Sensors FL2R/SSeries This DC2-wire Square Proximity sensor Can Be Directly Connected to Programmable Controllers and Units. Wide Range of Models Available. Reduced wiring costs
More informationSA1W: Water Detection Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable
More informationAnti-spatter Inductive Prox E2EQ. Ordering Information. Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors. H Rugged fluoroplastic coated brass
R Anti-spatter Inductive Prox Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors H Rugged fluoroplastic coated brass barrel withstands high tightening torque H Fluoroplastic resin face prevents weld
More informationpanasonic.net/id/pidsx/global Solve issues related to machine safety and other safety measures with a safety door switch with key!
655 Door with Key SERIES Related Information General terms and conditions... F-7 General precautions... P.50 PHOTO PHOTO Conforming to Machine & EMC Directives Recognition Certified MEASURE ITY panasonic.net/id/pidsx/global
More informationHigh-frequency AC Method. panasonic-electric-works.net/sunx. A new style of charge removal New ultra-compact, high-performance ionizer!
199 PHOTOEECTRIC PHOTOEECTRIC Ultra-compact SERIES Related Information High-frequency AC Method General terms and conditions... F-17 Glossary of terms... P.11 guide... P.175~ General precautions... P.15
More informationSG-B1 SERIES / SG-A1 SERIES
643 Door with Solenoid Interlock / Door Ultra-slim SG-B1 SERIES / SG-A1 SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 PHOTO PHOTO Conforming to Machine &
More informationModel Pressure range ON/OFF output Linear output
Authorised Distributors:- ASH & ALAIN INDIA PV LD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) el : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Digital Sensor Sensor
More informationsensors SA1C-F High-speed Fiber Optic: SA1C-F
High-speed Fiber Optic: Key features: Ideal for remote sensing applications Featuring quick-connect cable and easy-insert fiber optic units for simple installation Through-beam and reflected-light sensing
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
More informationInductive Proximity Sensor
Inductive Proximity Sensor E2Q3 Square Proximity Sensor Terminal housing Integrated short circuit and reverse polarity protection Output function programmable by wiring Active face positioning: Y-axis
More informationInductive Proximity Sensor
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Inductive Proximity Sensor E2Q3 Square
More informationFL7M-A Series. Aluminum-chip Immunity DC 2-wire Type Cylindrical Proximity Sensors. Specifications. click FEATURES ORDER GUIDE
6 FL7M-A Series FEATURES Workpieces Reliably Sensed Even if Aluminum or Cast Iron Chips Accumulate on the Sensing Head. This DC 2-wire type proximity sensor can be directly connected to programmable controllers
More informationDC2-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors N.O. N.C. N.O. N.C. N.O. N.C. 8mm N.O. N.C. N.O. N.O. N.C. N.O. N.O. N.C.
DC-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors FL7M-ASeries Detects workpieces reliably even if aluminum or cast iron chips accumulate on the sensing head. DC-wire proximity sensors can
More informationE2E/E2EQ NEXT Series. Proximity Sensor. Long-distance Detection Prevents Unexpected Facility Stoppages. E2E/E2EQ NEXT Series Model Number Legend
Proximity Sensor Long-distance Detection Prevents Unexpected Facility Stoppages The world's longest sensing distance* Nearly double the sensing distance of previous With high-brightness LED, the indicator
More information2-Color Display Digital Pressure Switch. NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. Rated Pressure Metal Body Type
Series ISE70/75/75H New NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red
More informationccessories (sold separately) Name ppearance O.D. Mounting bracket Protective cover Spatter-guarded protective cover For M12 For M18 For M30 For M12 Fo
D3-Wire ylindrical Proximity Switches Model FL7M Extensive lineup includes M8 to M30 sizes, with NPN and PNP output models available for each. ompact size saves space Indicator lamp can be checked even
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type. MPa MPa (ISE75H) 2-color digital. Functions
-Color Display Digital Pressure Switch /75/75H Series NPN/PNP open collector outputs added. Zero-cut off display function added. For General Fluids For Air Rated Pressure Metal Body Type 0 5 (E75) () -Color
More informationDescription General-purpose models Timer-function models Output NPN PNP NPN PNP Part number E3X-NH11 E3X-NH41 E3X-NH21 E3X-NH51 Appearance
R High-Precision Fiber-optic Amplifier TheEmploysa16-Bit Processor as An Industry First H An Automatic Sensitivity Adjustment feature allows stable detection of objects in frequently changing environments
More informationEx.: Special spatter-resistant coating
Stainless Steel Sensing Face Proximity Sensor FL7SSeries The FL7S is a proximity sensor having a stainless steel sensing face and housing, and is specially designed for welding applications on the automobile
More informationPMS - PKS / PMW - PKW series
features / series warranty warranty Innovative housing (double enclosure) Cutting oils resistant (for machines tool) Immersion proof (sealing IP 67/68) High frequency switching Complementary output (NO+NC),
More informationDC2-Wire Regular Cylindrical Proximity Switches
DC-Wire Regular Cylindrical Proximity Switches FL7M Series Rigid structure, highly waterproof DC -wire switches with improved visibility of lamps. DC -wire, for reduced wiring costs. Stable sensing area
More informationCD34CNFLFxxx. Capacitive sensor, Foreground Suppression. Main features. Main functions. Description
Capacitive sensor, Foreground Suppression Main features Compact housing Supply voltage: 10 to 30 VDC Output: 100 ma, NPN or PNP preset Make or break switching function LED indication for output and power
More informationunit:mm L: LED indicator (120mm from the switch) Add "-L" after cartridge name for LED type
CS-Touch CSH Contact type position switch series www.metrol.co.jp/en 1-signal plunger type (Ball bearing) Sliding, angled, offset touch type Direct-sliding ball bearing is equipped to the plunger Suitable
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type (ISE75H) 2-color digital. Functions
Series ISE70/75/75H NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red Green
More informationPG-30 PRESSURE GAUGES P G R - N FEATURES MODEL NUMBER DESIGNATION
marking Compatible with EMC directive INTERNAL STRUCTURE 5 1 2 6 4 3 Part name Material FEATURES 1 Pressure sensor P-2000 Compact and lightweight general-purpose pressure gauges Innovative general-purpose
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Series ZSE3/ISE3 2-color digital display allows you to choose the setting according to your application requirements. 4 different display settings
More informationSA1A and SA1B: High-Speed, Slim Style Photoelectric Sensors
SA1A and SA1B: High-Speed, Slim Style Photoelectric Key features of the SA1A and SA1B include: Ideal for installations with broad or narrow clearances Available with through-beam between the projector
More informationDifferential Pressure Sensor
Differential Pressure Sensor "Cube" Type Differential Pressure Sensor with LED Display Offers High Precision Sensing 31 (1.) x 3 (1.18) x 3 (1.18) mm compact-cube style saves mounting space Easy-to-read
More informationDC2-Wire Cylindrical Long-Distance No-Polarity Proximity Switches
D-Wire ylindrical Long-Distance No-Polarity Proximity Switches FL7M Series Rigid structure reduces damage from collision with workpiece. Long sensing distance (M: mm, M: mm, M: 5 mm) D -wire switch with
More informationOrdering Information. Long Barrel Inductive Prox E2E2 2-WIRE AC. Rugged Inductive Prox Sensors Meet IP67 Requirements
R Long Barrel Inductive Prox Rugged Inductive Prox Sensors Meet IP67 Requirements H Solid potted internal circuitry withstands shocks and water washdown to IP67 H Thick nickel-plated brass barrel has wrench
More informationSensing & Safety GENERAL CATALOGUE 2004/2005
GENERAL CATALOGUE 00/005 Sensing & Safety Photoelectric Sensors Displacement Sensors Vision Systems Safety Sensors Safety Switches Safety Relays Proximity Sensors Rotary Encoders Pressure Sensors Advanced
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Settings can be copied to up to 1 slave sensors at once. The settings of the master sensor can be copied to the slave sensors. Reduced setting efforts
More informationBarrel Size Metal Barrel Plastic Barrel. 5 Nm (3.7 ft-lb) 10 Nm (7.4 ft-lb) 15 Nm (11 ft-lb) 25 Nm (18 ft-lb) 90 Nm (66 ft-lb) 90 Nm (66 ft-lb)
Mounting TURCK inductive proximity sensors are manufactured with a shielded coil, designated by Bi in the part number, and a nonshielded coil, designated by Ni in the part number (See page C7). Embeddable
More informationCylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
More information