Instruction Manual. Admiral 48D ( )

Size: px
Start display at page:

Download "Instruction Manual. Admiral 48D ( )"

Transcription

1 Instructin Manual Admiral 48D ( )

2 Intrductin 2 PrefaceIntrductin Dear Custmer, We are certain that the excellent qualities f the vehicle will justify the faith yu have shwn in us thrugh yur purchase. Yur safety, and that f thers, basically lies in yur ability t cntrl and perate the vehicle. Befre using the vehicle fr the first time, read this translatin f the riginal manual thrughly, act accrding t the infrmatin cntained and keep it in a safe place fr future reference r subsequent wners. Please read the Chapter "Safety Infrmatin" prir t starting the vehicle t ensure it is perated and used safely. The perating manual cntains all the mst imprtant infrmatin regarding peratin, maintenance and service. Thrughut this manual, texts which cncern safety are indicated by the crrespnding danger pictgram. Shuld yu have any questins in respect f the vehicle r perating instructin manual, yur authrized PwerBss dealer is available t prvide help at any time. We explicitly pint ut that n legal claims may be asserted based n the infrmatin cntained in this manual. Please pay attentin that nly riginal spare parts are used fr any necessary maintenance and repair wrk. Only riginal spare parts can guarantee lng, reliable equipment peratin. We reserve the right t make technical imprvements. Valid frm: January 2012 PwerBss Inc. 175 Andersn Street NC U.S.A. Telephne: (910) Fax: (910) Intended use The Admiral 48D is a scrubber-drier vehicle cnceived fr wet cleaning hard flrs indrs. Any use beynd this is regarded as imprper use. The manufacturer is nt cnsidered liable fr any damage resulting frm imprper use; the user is slely respnsible fr all the risks. The scrubber-drier has nt been apprved fr use n public paths and rads. Intended use als includes maintaining and bserving the perating, maintenance and repair cnditins prescribed by the manufacturer. The scrubber-drier may nly be perated, serviced and repaired by persnnel wh are familiar with the wrk invlved and are aware f the risks. The applicable accident preventin laws must be bserved and any generally accepted health and safety directives must be maintained. Based n the cnceptin, design and cnstructin f the vehicle intrduced nt the market by us, the vehicle cmplies with the applicable basic

3 Intrductin safety and health requirements stipulated in the EC Directive (refer t the Declaratin f Cnfrmity). This declaratin is n lnger cnsidered valid in the event f mdificatins t the vehicle nt authrized by us. The manufacturer is nt deemed liable fr any damage resulting frm unauthrized mdificatins t the vehicle. Ntes n warranty The terms defined in the purchase agreement apply. Claims fr cmpensatin related t damage are excluded frm the terms f warranty when the damage is the result f failure t bserve regulatins cncerning service and maintenance. Maintenance wrk must be perfrmed by authrized PwerBss service centers and cnfirmed in the Maintenance Reprt which serves as a warranty lgbk. The fllwing are excluded frm the terms f warranty: wear and tear thrugh veruse, defective fuses, imprper handling and use r unauthrized mdificatins. Claims under the terms f warranty are annulled when damage ccurs t the vehicle resulting frm the use f parts r accessries nt explicitly apprved by us r frm failure t bserve maintenance regulatins. Acceptance f the machine Inspect the vehicle immediately n delivery fr signs f transprt damage. It will be replaced when the damage is immediately cnfirmed by the haulage cntractr and the damage reprt is sent t ur authrized sales partner tgether with the cnsignment nte. 3

4 Cntents Intrductin Preface Intended use Ntes n warranty Acceptance f the machine Safety Infrmatin Safety and warning symbls General infrmatin Operating infrmatin Maintenance infrmatin Particular risks Electrnics Batteries Envirnmental prtectin Labels n the vehicle Starting Up Instructin Initial battery charge Prir t starting up fr the first time Installing brushes and pads Installing and adjusting the squeegee Adjusting the driver's seat Befre starting up daily Operatin Methd f peratin Pre-sweep/vacuum unit Scrubbing unit Squeegee Suctin turbines (suctin) Fresh water tank Recvery tank Tractin drive Brakes Batteries and charger Optins Operating and indicatr elements Operating elements in the driver's cab Left-hand perating panel Right-hand perating panel Operating elements n the vehicle Operatin Switching the vehicle n Accelerating Stpping and parking Cleaning Switching the vehicle ff Lading and transprting the vehicle After finishing wrk Functin faults Errr cde table Other functin faults Technical Data Maintenance and Service PwerBss system maintenance Maintenance reprt Maintenance schedule PwerBss system maintenance, custmer PwerBss system maintenance I PwerBss system maintenance II PwerBss system maintenance III/S (safety check)

5 Cntents 5.4 Battery system Charging batteries Servicing the driving batteries Disassembling the battery Installing the battery Dispsing f batteries Deep discharge signal transducer (BMS) Fresh water tank Filling the fresh water tank Emptying the fresh water tank Cleaning the draining hse cap Cleaning the fresh water filter Recvery tank Emptying the recvery tank Cleaning the recvery tank Cleaning the draining hse cap Cleaning the air intake filter Cleaning the penings t the fresh water tank Scrubbing unit Changing the brushes Installing new rubber deflectr strips Squeegee Cleaning the squeegee Disassembling the squeegee Installing the squeegee Changing the sealing strips Adjusting the supprt rllers Pre-sweep/Vacuum unit Emptying the dirt hpper Dust vacuum Side brushes Cylindrical brush Wheels Changing the rear wheels Changing the frnt wheel Electrical installatin Red cntrl lamps Errr cdes Fuses Drive cntrl relay Cleaning the vehicle Transprt and twing PwerBss Warranty

6 Safety Infrmatin 1 Safety Infrmatin 1.1 Safety and warning symbls All texts related t persnal safety, safety f the vehicle and envirnmental prtectin are assigned the fllwing symbls thrughut the perating manual: Symbl Risks t... Definitin Safety infrmatin persns r prperty Safety infrmatin t prevent the develpment f hazardus situatins resulting frm ignring r failing t fllw instructins r prescribed wrk prcedures. Nte the machine Imprtant infrmatin n handling the equipment in rder t maintain its functinality. Eclgical hazard the envirnment Eclgical hazard thrugh the use f substances which represent a ptential hazard t health and the envirnment. 6

7 Safety Infrmatin 1.2 General infrmatin The scrubber-drier fulfills all the applicable safety and health requirements stipulated in the EC directives with regard t its planning, cnstructinal design and final cnstructin as intrduced by us nt the market. In the case f mdificatins t the vehicle nt apprved by us, the EC Declaratin f Cnfrmity enclsed in this perating manual lses its validity. In additin t the infrmatin prvided in this perating manual, all the legally applicable health and safety prvisins must be bserved. Befre starting up the vehicle fr the first time, read the perating manual supplied with it thrughly as well as any separate manuals prvided with additinal r attachment devices and bserve all the infrmatin during wrk. The vehicle may nly be perated, maintained and repaired by persns trained by PwerBss r authrized t d s by PwerBss. Particular attentin shuld be paid t the infrmatin regarding safety. Technical expertise is the key t preventing errrs when perating the equipment and ensuring truble-free peratin. The perating manual must always be kept at the perating lcatin f the vehicle and, as a result, shuld be kept in a safe place n the vehicle. If the equipment is sld r rented ut, these dcuments shuld be transferred t the new wner/peratr. The transfer shuld be cnfirmed! The warning labels attached t the equipment prvide imprtant infrmatin cncerning safe peratin. Labels which are illegible r missing must be replaced. Original spare parts must be used t ensure safety. If yu want t shut the vehicle dwn, render it inperable. It must nt represent a surce f danger fr children. The psitinal infrmatin "left" and "right" always related t lking t the frnt when in the vehicle. 7

8 Safety Infrmatin 1.3 Operating infrmatin Befre starting the vehicle up fr the first time, the battery t be used must be fully charged, prperly, by implementing the initial battery charge rutine. Please pay attentin t the perating manual prvided with the charging unit as well as the manual frm the battery manufacturer. PwerBss assumes n liability fr damage t the battery caused by a fault when the battery is charged fr the first time. Befre starting the vehicle up, always check it is in a prper cnditin and that it is safe t drive and perate. Clear up any faults and defects immediately! Never perate the vehicle withut functinal safety equipment. Warning: D nt use the vehicle withut a prtective rf structure (refer t "Accessries", "Cab safety rf") in areas in which the driver is at risk f being hit by falling bjects (e.g. warehuses). Cntact the trade assciatin respnsible fr yu as t whether bligatins exist in this respect. The scrubber-drier must be subjected t an inspectin in respect f its peratinally safe cnditin at least nce a year by an authrized technical expert. The results f the inspectin must be dcumented in writing and kept safe at least until the next inspectin. Flr cleaning machines may nly be perated by suitable persnnel wh have been trained t perate the equipment, have prven their capability t perate the vehicle t the cntractr r persn appinted by him and have been explicitly charged by him t perate the vehicle. Befre starting wrk, perating persnnel must be fully familiar with all adjustment, perating and cntrl elements as well as their respective functin! It is t late t d this when the vehicle is actually in peratin! The warning labels attached t the scrubber-drier prvide imprtant infrmatin cncerning safe peratin. Wet flrs are a ptential risk fr slipping! Ensure t prvide the crrespnding infrmatin and warning signs. If the flr is excessively wet, check the vehicle fr leaks and that the sealing strips are in a gd cnditin. If the sealing strips are damaged, change them immediately. Only use cleaning agents suitable fr the vendr (nn-faming) and bserve all the use, dispsal and warning infrmatin prvided by the cleaning agent manufacturer. It is frbidden t use the vehicle in ptentially explsive atmspheres. The vehicle is nt suitable fr clearing up health-hazardus, inflammable r explsive fluids r dusts and substances with similar prperties. Ride-n equipment may nly be set int mtin frm the seat (seat cntact switch). The seat cntact switch must never be bypassed r the functin immbilized in any way (e.g. by placing a heavy lad n the seat). It is frbidden t transprt peple n the vehicle! Always wear heavy duty, nn-slip ftwear when wrking with the vehicle. 8

9 Safety Infrmatin Start driving immediately after switching n the brush head drive therwise the brush culd prduce impressins n the flr. The machine may nly be driven n and the equipment used n thse surfaces which have been apprved by the cntractr r persn appinted by him. The manner f driving must be adapted t the lcal cnditins (flr characteristics, presence f persns in the vicinity, bstacles, etc.). When using the vehicle, it is essential t pay attentin t third parties, especially children. Never leave the vehicle unattended while mtrs are still running and it has nt been lcked against unintended mvement. T prevent authrized use f the vehicle, lck the drive by remving the key frm the key switch. When transprting the vehicle, the mtrs must be shutdwn. Only pen empty recvery tanks. The scrubber-drier may nly be driven n hard-surfaced, sufficiently nn-slip grund (e.g. asphalt, cncrete) which is free f il, water, snw etc. The vehicle may nly be driven n gradients t a maximum f 6% fr a maximum f three minutes when in wrk mde. D nt drive the vehicle n slpes with a gradient steeper than the limit gradient indicated n the vehicle. The climbing capacities stipulated in this manual can and may nly be achieved with the battery specified in the Sectin Technical Data. When cleaning n slpes, the tractin may be restricted. When driving t its place f deplyment (transprt mde), the vehicle may nly be driven n gradients t a maximum f 15% fr a maximum f 15 secnds. When driving the vehicle in transprt mde, the grund must be clean and dry, i.e. free f dirt, il, snw, water etc., particularly when driving n gradients. 9

10 Safety Infrmatin 1.4 Maintenance infrmatin Prperly cmpleted vehicle maintenance is an imprtant measure in preventing accidents. The maintenance wrk and maintenance intervals prescribed in the perating manual must be adhered t. Operating persnnel must cmplete the necessary daily and weekly maintenance wrk. All ther maintenance wrk must be cmpleted at yur nearest authrized PwerBss service center. Befre starting any cleaning and maintenance wrk r replacing parts, switch ff the mtrs, remve the key frm the key switch and pull ut the battery plug. This is particularly imprtant in respect f wrk n the electrical system! Befre wrking n the brushes, switch ff the scrubbing unit, set the key switch t psitin 0 and remve the key. The scrubbing unit may nly be disassembled and installed by service persnnel. Suitable tls must be used fr cleaning and maintenance wrk. Spare parts must cmply with the minimum technical requirements stipulated by the manufacturer! This is ensured by the use f riginal spare parts. When wrking in the area f the raised seat cnsle, it must be pivted up fully t prevent it accidentally clsing r suddenly slamming shut. It is nt permitted t clean the vehicle with a pressure washer r steam blaster. Clean the recvery tank regularly t prtect it frm the accumulatin f dirt, viruses, bacteria, etc. It is nt permitted t use aggressive and crrsive cleaning agents. Allw the vehicle t dry after being cleaned, e.g. ver the weekend. The vehicle must be checked by a recgnized technical expert in respect f peratinal safety at reasnable intervals (we recmmend at least ne a year), particularly with regard t prtective equipment and lcks and fllwing mdificatins r repair. Only start the vehicle up when all the safety equipment has been installed, is functinal and brught t its prtecting psitin. The vehicle has been set up fr peratin using lw-maintenance batteries. If ther battery types are t be used, the vehicle must be adjusted fr them by an authrized PwerBss service center. Observe the infrmatin in the perating manual prvided by the battery manufacturer. These must be available t perating and maintenance persnnel at all times. Batteries may nly be handled and changed by prperly skilled maintenance persnnel. When installing the battery, use apprpriate lifting gear. Only use batteries and chargers recmmended by us. The full terms f warranty can nly be accepted when these units are used. Pay attentin that the insulatin n the charger is nt initially damaged and nt damaged during the charging prcess. The cable must nt rub against anything. D nt use the charger if the insulatin is damaged. 10

11 Safety Infrmatin Always wear apprpriate prtective clthing when handling the battery (e.g. prtective glves, finger stalls, prtective gggles). The seat cnsle must be pivted pen during the battery charging prcess t prevent the develpment f explsive xyhydrgen! Never leave the batteries in a discharged state but recharge them as sn as pssible. Only refill distilled water. When the cells are in gd cnditin, never refill battery acid. Spilled battery acid must never enter the sewage system in its initial frm, it must be neutralized befrehand. Pay attentin t legal requirements and lcal directives. Fr further safety infrmatin, see supplementary sheet "Ntes n driving batteries". 11

12 Safety Infrmatin 1.5 Particular risks The fllwing applies when lcating and clearing faults: Switch the vehicle ff, remve the key frm the key switch and discnnect the battery plug! In the case f faults invlving the tractin drive, stp the vehicle immediately and remve the key frm the key switch! Electrnics Always discnnect the battery plug befre starting any wrk n the electrical installatins. Only use riginal fuses with the prescribed amperage. In the case f defects in the electrical installatin, switch the vehicle ff immediately and clear the fault. Wrk n the electrical equipment may nly be carried ut by electricians wh have received the necessary training and in accrdance with the electrical engineering regulatins. The vehicle's electrical equipment must be inspected/checked at regular intervals. Defects, such as lse cnnectins and cable damage, must be rectified immediately Batteries Due t a change in the center f gravity, nly apprved batteries may be installed at the intended psitin. T prevent creeping currents, always keep the batteries clean and dry and prtect frm cntaminatin, e.g. frm metal dust. Never lay any metallic bjects r tls n batteries. Risk f shrt circuit and deflagratin! Ensure sufficient ventilatin in the charging area when charging the batteries. Otherwise there is a risk f explsin! The seat cnsle must be pivted pen during the battery charging prcess t prevent the develpment f explsive xyhydrgen! Only use recmmended chargers! Pay attentin that the insulatin is nt initially damaged and nt damaged during the charging prcess. The cable must nt rub against anything. D nt use the charger if the insulatin is damaged. Ensure there are n naked flames nearby when handling batteries, particularly when checking the acidity. Risk f explsin! D nt inhale battery gases. Battery acid is very crrsive; keep away frm children. Wear prtective gggles when cntrlling the acid level. In the event f acid splashing in the eyes, rinse them with water fr apprx. 15 minutes and seek medical attentin immediately. Als pay attentin t the infrmatin in Sectin

13 Safety Infrmatin 1.6 Envirnmental prtectin A certain factual expertise is required in rder t use substances which culd represent a risk t health and the envirnment. Always bserve legal regulatins and lcal directives when dispsing f cleaning agents. Dispsing f batteries Used batteries with the recycling symbl cntain reusable cmmdities. The heavy metals cntained represent a majr risk bth t peple's health and t the envirnment. Never pen r damage batteries. Never tuch, inhale r swallw the cntent f batteries. Health hazard! D nt allw batteries t get int the envirnment. Risk f cntaminating the sil and water! In accrdance with symbl with the crssed ut garbage bin, these batteries must nt be dispsed f in dmestic waste. Return and recycling f ld batteries must be agreed n with the authrized PwerBss dealer in accrdance with natinal requirements. Dispsing f the vehicle Render the vehicle inperable. It must nt represent a surce f danger fr children. Dispse f the vehicle in accrdance with lcal regulatins. Fr further infrmatin n handling and recycling, please cntact the authrized PwerBss dealer where yu purchased the vehicle. 13

14 Safety Infrmatin 1.7 Labels n the vehicle The fllwing safety and warning labels are attached t the vehicle where easily legible. Missing r illegible labels must be replaced immediately. 2 Cmpany lg (Fig. 1/1) (Fig. 2/1) 1 Rating plate (Fig. 1/2) The rating plate is in the driver's cab, at the bttm n the flap f the left-hand electrical cmpartment Fig. 1 14

15 Safety Infrmatin Read the perating manual, gradient driving limits and never clean with a high-pressure washer (Fig. 1/3) N standing n the deflectrs (Fig. 1/4) Wrking width (Fig. 1/5) The wrking width f the machine is specified in millimeters and in inches n the deflectrs t the left and right: The vehicle has a wrking width f 1230 mm r 49 in. 15

16 Safety Infrmatin Drive directin selectr: Frwards r reverse (Fig. 2/6) 6 7 Release parking brake (Fig. 2/7) 8 Apply parking brake (Fig. 2/8) 9 Maximum water temperature fr water t be filled (Fig. 2/9) 1 Fig. 2 16

17 Safety Infrmatin Fresh water drainage (Fig. 3/10) The fresh water is drained via the hse which hangs t the left f this label. Waste water drainage (Fig. 3/11) The waste water is drained via the hse which hangs t the right f this label. N waste water drainage (Fig. 3/12) The flap serves exclusively fr cleaning and maintenance f the recvery tank Fig. 3 17

18 Starting Up 2 Starting Up Pay attentin t persns in the vicinity f the vehicle when cmpleting any wrk. 2.1 Instructin Operatrs must receive instructin befre the vehicle is put int service. Only technicians frm yur lcal authrized PwerBss dealer are allwed t prvide initial instructin n the vehicle. The manufacturing plant will ntify the dealer immediately after delivering the vehicle and the dealer will cntact yu t arrange a date. 2.2 Initial battery charge An initial battery charge must be perfrmed n the batteries in rder fr them t prvide an ptimum perfrmance and service life. A battery charger is available which is specially adapted t the batteries. The seat cnsle must be tipped up during the charging prcess. T d this, take hld f the seat cnsle at the handle and pivt it frwards t pen it. The seat cnsle must be pivted pen during the battery charging prcess t prevent the develpment f explsive xyhydrgen! Only use the riginal charger! Pay attentin that the insulatin is nt initially damaged and nt damaged during the charging prcess. The cable must nt rub against anything. D nt use the charger if the insulatin is damaged. D nt inhale battery gases. Only use batteries and chargers recmmended by us. The full terms f warranty can nly be accepted when these units are used. Befre starting the vehicle up fr the first time, the batteries t be used must be fully charged, prperly, by implementing the initial battery charge rutine. PwerBss assumes n liability fr damage t the battery caused by a fault when the battery is charged fr the first time. Please pay attentin t the perating manual prvided with the charging unit as well as the manual frm the battery manufacturer. Pwering up the batteries is described in such detail in the manufacturer's dcuments, further infrmatin n the subject is cnsidered unnecessary fr this manual. 18

19 Starting Up 2.3 Prir t starting up fr the first time The fllwing wrk must be cmpleted befre starting the vehicle up fr the first time: Installing brushes and pads The machine must have three brushes r three pads fitted. Befre starting t use the vehicle fr the first time, ensure that apprpriate brushes r pads have been installed. The brush head has t be in lifted psitin when changing the brushes. Switch ff the scrubbing unit, set the key switch t psitin 0 and remve the key. Selecting brushes The scrubber-drier must be equipped with the brushes and pads frm the accessries prgram accrding t the degree f siling and characteristics f the flr. Fig. 4 Refer t Sectin 4 fr the brushes available. At the factry, a water retaining ring (Fig. 4/1) is fitted t the brushes which reduces water cnsumptin cnsiderably during scrubbing. 1 Opening and clsing the deflectr Fig. 5 1 Deflectr 2 Deflectr lck 3 Grip Open the deflectr (Fig. 5/1) befre assembling r disassembling brushes and pads: 1. Take hld f the deflectr (Fig. 5/1) by the grip (Fig. 5/3). 2. Raise the deflectr (Fig. 5/1) and pivt utwards t the frnt. 3. Lwer the deflectr (Fig. 5/1) (service psitin). The deflectr is clsed in the ppsite sequence. 19

20 Starting Up Assembly sequence Assemble the middle brush r pad first and then munt the uter brushes/pads. Disassembly sequence The uter left brush r pad must be disassembled befre the middle brush r pad can be disassembled. Disassemble the middle brush r pad preferably frm the lefthand side f the vehicle because the guiding aid fr the assembly tls is lcated here. Assembly tl T simplify assembly and disassembly f the middle brush r pad in particular, an assembly tl (Fig. 6/4) is prvided which is kept in a crrespnding hlder (Fig. 6/3) under the seat cnsle which can be pened ut. Bth sides f the plate (Fig. 6/1) f the assembly tl (Fig. 6/4) can be used: T assemble brushes, the flat side f the plate (Fig. 6/1) (withut centering device (Fig. 6/6)) must pint upwards. T assemble pads, the side f the plate (Fig. 6/1) with the centering device (Fig. 6/6) must pint upwards. There are pins (Fig. 6/2) n bth sides f the plate (Fig. 6/1) which serve t center the brush r pad n the assembly tl. Turn the plate: 1. Remve the screw (Fig. 6/5). 2. Remve the plate (Fig. 6/1) frm the dwel (Fig. 6/7). 3. Turn the plate (Fig. 6/1) ver. 4. Fit the plate (Fig. 6/1) upside dwn n the dwel (Fig. 6/7). 5. Insert and tighten the screw (Fig. 6/5) The assembly tl (Fig. 6/4) can be used t assemble and disassemble all the brushes r pads. Fig. 6 20

21 Starting Up Assembling the middle brush r middle pad 1. Open the deflectr (Fig. 5/1), refer t paragraph Opening and clsing the deflectr. 2. If necessary, remve the brushes r pads already installed, refer t paragraph Disassembling the uter brushes / pads and paragraph Disassembling the middle brush r middle pad. 3. Psitin the middle brush (Fig. 7/2) r middle pad (Fig. 7/5) as illustrated in Fig. 7 n the assembly tl (Fig. 7/1). The crrect side f the plate f the assembly tl must pint upwards, refer t paragraph Assembly tl. 4. Take hld f the assembly tl (Fig. 7/1) at the narrw end and slide the brush (Fig. 7/2) r pad (Fig. 7/5) under the middle brush catch (Fig. 7/4) Fig. 7 21

22 Starting Up Frce the narrw end f the assembly tl (Fig. 7/1) dwnwards. As a result f the levering effect, the brush (Fig. 7/2) r pad (Fig. 7/5) is pressed int the brush catch and audibly latches in place. 6. In rder t cntrl whether all the hks are in place, turn the brush r pad installed nce. 7. Cntinue by assembling the uter brushes, refer t paragraph Assembling the uter brushes / pads. 8. Clse the deflectr, refer t paragraph Opening and clsing the deflectr. The deflectr (Fig. 5/1) is nw in its wrking psitin. Assembling the uter brushes / pads 1. Open the deflectr (Fig. 5/1), refer t paragraph Opening and clsing the deflectr. 2. Slide the brush (Fig. 7/2) r pad (Fig. 7/5) under the brush head in accrdance with Fig Raise the brush (Fig. 7/2) r pad (Fig. 7/5) and turn it slightly until the tthing meshes. 4. Pull the brush (Fig. 7/2) r pad (Fig. 7/5) up until all six hks latch in the catches. Fig In rder t cntrl whether all the hks are in place, turn the brush r pad installed nce. 6. Clse the deflectr, refer t paragraph Opening and clsing the deflectr. The deflectr (Fig. 5/1) is nw in its wrking psitin. Yu can als use the assembly tl as an aid t cmplete steps 2 t 4, refer t the crrespnding steps 3 t 5 in paragraph Assembling the middle brush r middle pad. When cmpleting Step 5, pay attentin that yu must simultaneusly use yur free hand t push dwn n the brush head! Exerting cunterpressure is the nly way t ensure that the brush r pad engages prperly! Disassembling the uter brushes / pads 1. Open the deflectr (Fig. 5/1), refer t paragraph Opening and clsing the deflectr. 2. Pull the brush (Fig. 7/2) r pad (Fig. 7/5) frm the brush head. Or: 3. Slide the narrw side f the assembly tl between the brush/pad and brush head and press the wide end f the assembly tl dwnwards. As a result f the levering effect, the brushes / pads are released frm the brush head (Fig. 7/3).

23 Starting Up Disassembling the middle brush r middle pad 1 T simplify disassembling the middle brush, a guiding aid is prvided n the left-hand side. 1. Open the left-hand deflectr, refer t paragraph Opening and clsing the deflectr. 2. Disassemble the uter left brush r pad, refer t paragraph Disassembling the uter brushes / pads. 3. Insert the narrw side f the assembly tl (Fig. 9/1) in the guiding aid (Fig. 9/2). 4. Slide the assembly tl (Fig. 9/1) as far as pssible t the rear. 5. Frce the brad end f the assembly tl with the plate (Fig. 6/1) dwnwards. As a result f the levering effect, the brush r pad (Fig. 9/3) is released frm the brush head. 6. Draw the assembly tl (Fig. 9/1) back and remve frm the guiding aid (Fig. 9/2). 2 3 Fig. 9 23

24 Starting Up Installing and adjusting the squeegee Fig. 10 Installing the squeegee 1. Switch n the key switch. 2. Lwer the hlding attachment f the squeegee: Press the buttn fr the squeegee and suctin turbine s that the green cntrl lamp lights up. 3. Switch ff the key switch and remve the key. 4. Open the rear drs. 5. Slide the squeegee frm the rear under the lwered hlding attachment and fix the squeegee t it with the fur wing nuts (Fig. 10/1). 6. Attach the suctin hse t the cnnectin nzzle (Fig. 10/2) f the squeegee Insert the key in the key switch and turn the key switch n. 8. The squeegee is raised autmatically. 9. Clse the rear drs. Adjusting the squeegee The squeegee must be set up n a level flr accrding t the cnditins in which it is t be used. The squeegee must stand vertically n the flr (adjusted at the factry). The sealing strip (Fig. 10/3) shuld bend slightly t the rear when the vehicle is in peratin. Supprt rllers (Fig. 10/5) limit its mvement tward the flr. These supprt rllers must be adjusted in rder t raise the cntact surface f the squeegee: Lsen the cunternuts (Fig. 10/4) and raise the supprt rllers n the left and right evenly (turn screw cunterclckwise and lck again). The sealing strip nw bends a little mre twards the rear. An adjustment f the supprt rllers is als necessary when the edge f the sealing strip is wrn. 24

25 Starting Up Adjusting the driver's seat The driver's seat (Fig ) must be adjusted s that the driver is seated cmfrtably and can reach all the perating elements with ease. The vehicle is equipped with a seat cntact switch. The vehicle can nly be perated when the perating persn is seated n the seat. The scrubber-drier is equipped with a driver's seat which can be adjusted as fllws: accrding t the driver's weight, accrding t the angle f the seat backrest, accrding t the lngitudinal directin (frward and back). Adjusting t the driver's weight Adjust the lever at the tp right f the backrest: lighter driver, pivt the lever upwards heavier driver, pivt the lever dwnwards Fig. 11 Adjusting the angle f the seat backrest Turn the knb n the bttm right f the backrest accrdingly. Adjusting lngitudinally 1. Frce the lever n the right f the seat utwards slightly. 2. Slide the seat frward r back in steps f 0.6 in. Fig. 13 Fig

26 Starting Up 2.4 Befre starting up daily Carry ut the fllwing checks befre starting the vehicle up fr its daily peratin (als refer t Sectin 5.3.1): 1. Check the recvery tank, empty it if necessary. Clean it as necessary. Refer t Sectins and Fill the fresh water tank and add a cleaning agent in accrdance with the manufacturer's mixing directives. Refer t Sectin and Sectin Only use cleaning agents (nnfaming) suitable fr the vehicle's vendr. We recmmend using ur clean and care prducts which are specially balanced fr the vehicles. 3. Check the battery charge and recharge as necessary; refer t Sectin Befre starting the vehicle fr its first wrking peratin, carry ut an initial battery charging rutine; refer t Sectin Check the parking space fr signs f leaks. Hses, lines and tanks must shw n signs f leaks r damage. If necessary, clear up any defects befre putting the vehicle int peratin. 26

27 Operatin 3 Operatin Operating persnnel must read the perating manual thrugh carefully. Operating persnnel shuld cmplete their initial test drive n a sufficiently large piece f pen space until they are familiar with the individual perating elements and the respective functins. 3.1 Methd f peratin The Admiral 48D is a scrubber-drier fr wet cleaning hard flrs (refer t Fig. 14). It cleans flrs by means f intensive scrubbing with the aid f a water and cleaning agent slutin. The squeegee at the rear f the vehicle vacuums up the waste water int the recvery tank in the same wrking prcess. By using the pre-sweep/vacuum unit, the vehicle can als be perated accrding t the tandem principle fr the advanced sweeping and dry cleaning f hard flrs: the dirt is swept up dust-free using tw side brushes and a cylindrical brush. Fig. 14 The scrubber-drier is a ride-n machine designed fr the ecnmic cleaning f large flr areas in buildings. A seat cntact ensures that the vehicle can nly be perated when an peratr is seated n the driver's seat. The mst imprtant vehicle elements are described belw: Pre-sweep/vacuum unit (Fig. 15/4) The pre-sweep/vacuum unit sweeps and vacuums up dirt in dry areas in frnt f the scrubbing unit withut swirling up dust. In this case, the tw side brushes sweep the dirt directly in the track f the cylindrical brush. The side brushes sweep up the dirt frm crners and edges s that it is nt necessary t drive t clse t shelves, walls, machines, etc. and a driving clearance t allw steering can easily be maintained. The cylindrical brush then sweeps the dirt frwards int the dirt hpper. The fine dust swirled up by the cylindrical brush is drawn up by the extractr fan and fed t the filter element. Only clean air is blwn frm the machine. The Admiral 48D cmplies with dust categry U (BIA). The pre-sweeping and vacuuming system and the filters are easily accessible fr maintenance tasks. 27

28 Operatin Scrubbing unit (Fig. 15/5) Three disk brushes, which can be changed withut the need f tls, ensure a high cleaning perfrmance. They are each driven by a brush mtr. The brush pressure can be adjusted electrically accrding t the flr and accumulatin f dirt. When the brushes are raised, the water supply and brush rtatin are stpped autmatically. The deflectin bars t the left and right f the disk brushes can be raised, if necessary. This ensures the cleaning slutin is nt frced t the center f the vehicle and, as a result, can sak the dirt. This is necessary fr basic cleaning (wet scrubbing nly), fr example. Hk in the deflectrs, refer t paragraph Scrubbing unit. 6 5 In the case f all cleaning wrk invlving immediate vacuuming, the deflectrs must be unhked s that the deflectrs make cntact with the flr. Fig

29 Operatin Deflectrs (Fig. 15/5) T the right and left f the disk brushes, near the flr, are tw deflectrs which, when in their wrking psitin, prevent water splashing t the sides and guide the waste water t the center f the vehicle s that it can be vacuumed up better. The deflectrs can be raised, if necessary. This is the case fr basic cleaning, fr example, where the flr nly needs t be scrubbed when wet and the slutin is nt vacuumed up but allwed t sak in instead. T raise the deflectr, take hld f the grip (Fig. 15/1), raise it and hk the lcking hks (Fig. 15/3) in the recesses in the angle (Fig. 15/2) abve it. Prceed in the same way n the ther side f the side f the vehicle Squeegee (Fig. 15/6) The squeegee, which prjects at the sides, is fixed t the scrubber-drier s that it can pivt and swing. This enables it t evade bstacles in the current track and pivt back. Its strng suctin capacity ensures the waste water is vacuumed up fully even n uneven flrs and in bends, leaving the flr dry enugh t be walked n. The squeegee must be checked prir t starting wrk, when dispsing f waste water and/r filling the fresh water tank and cleared f any freign bdies which have been vacuumed up. Check that the sealing strips are in perfect cnditin. The rllers serve t supprt the squeegee t prevent excessive bending f the sealing strips. The squeegee is autmatically raised when reversing Suctin turbines (suctin) (Fig. 16/3) The tw suctin turbines are lcated n the rear panel f the fresh water tank and can be accessed after pening the rear drs. The suctin turbines are switched n and ff autmatically when lwering and raising the squeegee, respectively. A flat switch in the recvery tank switches the suctin turbine ff autmatically n reaching the maximum fill height. 29

30 Operatin Fresh water tank (Fig. 16/2) The fresh water tank is lcated behind the driver's seat n the right-hand side. The fresh water tank is a tank partitined by a membrane panel and has a vlume f apprx gal. Open up the red tank cap and secure it t fill the tank. Fill water, max. 122 F, and add the cleaning agent in accrdance with the manufacturer's instructins. Lwer the cap again t clse it. Only use cleaning agents (nnfaming) suitable fr the vehicle's vendr. We recmmend using ur clean and care prducts which are specially balanced fr the scrubber drier. Observe the crrect dsage f the cleaning agent. The crrect dsage helps t reduce csts and prtect the envirnment Fig

31 Operatin The develpment f excessive fam impairs the vehicle's functin. It indicates verdsage f the cleaning agent; cmpnents f the cleaning agent which are fed back t the waste water cause faming. Infrmatin n dsage is prvided n the cleaning agent cntainer. Use the manufacturer's infrmatin as an initial guideline. Practical experience will ensure that yu quickly find ut which is the right cleaning agent and the ptimum dsage t suit yur needs. The fresh water supply t the brushes is autmatically pened when the scrubbing prgram is activated. If necessary, the feed can be stpped manually by means f the ball cck. Operating times with ne tankful: at 0.5 gal/min apprx. 155 minutes at 1.1 gal/min apprx. 77 minutes at 1.8 gal/min apprx. 44 minutes Recvery tank (Fig. 16/1) The recvery tank is lcated behind the driver's seat n the left-hand side. The recvery tank is a tank partitined by a membrane panel and has a vlume f apprx gal. The waste water is fed t the recvery tank via the squeegee by means f a vacuum. A flat switch at the tp f the recvery tank switches the suctin turbine ff autmatically as sn as the maximum tank fill level is reached. In this case, the cntrl lamp (Fig. 19/2) n the left perating panel lights up. An acustic signal is als issued. A spray/vacuum tl (refer t Sectin 4), which can be cnnected t the vehicle, is ptinally available with which t clean and vacuum up water frm areas difficult t access. 31

32 Operatin Tractin drive The tractin drive is prvided by a drive mtr n the steerable frnt wheel. The driving speed can be cntinuusly regulated via the acceleratr by means f the electrnic drive cntrl (pulse cntact cntrl). The axle gear is a gear train which runs in an il bath. In the case f faults invlving the tractin drive, stp the vehicle immediately and remve the key frm the key switch! Brakes The scrubber-drier is equipped with a service brake and a parking brake. The service brake relates t a drum brake which acts hydraulically n the rear wheels. It is actuated by a ft pedal. The parking brake is actuated mechanically via brake cables. It is applied by means f the ft pedal t the left f the steering clumn and released using the safety catch in the steering clumn. 32

33 Operatin Batteries and charger The scrubber-drier is pwered by a tractin battery (36 Vlt / 395 Ah 5 ), 6 mnblc batteries each prducing 6 Vlt. They are fit in a battery tray. T ensure prtectin against deep discharge, the scrubber drier is equipped with a deep discharge signal transducer (Battery Management System (BMS)). It is integrated in the electrnic system and set up at the factry fr GiS batteries (service indicatr: N. 5). If ther batteries are used, the deep discharge signal transducer must be adjusted. This adjustment wrk shuld nly be perfrmed at an authrized PwerBss service center. The battery is prvided with a cnnectin cable with battery plug (Fig. 17/1). When the battery plug is plugged int the vehicle scket (Fig. 17/2), the vehicle is ready t perate. 1 2 Fig

34 Operatin In rder t charge the battery, the battery plug must be plugged int an adapter and the adapter cnnected t the charger. The vehicle includes an adapter cmprised f tw plugs cnnected by a 11.8 in lng piece f cable. The adapter belngs t the scpe f delivery f the vehicle. The battery charger is nt cntained in the scpe f delivery f the vehicle. Only use an apprpriate charger! Pay attentin t the safety infrmatin enclsed with each battery. 34

35 Operatin Optins 1 Wrking lights 2 Cab safety rf 3 Flashing beacn 4 Spray/Vacuum tl 5 Side brush cllisin prtectin 6 Side cllisin prtectin (nt assembled in the illustratin) Fig

36 Operatin The basic vehicle can be supplemented by further cmpnents. The rder and spare parts numbers f these cmpnents are in brackets. Please refer t ur spare parts catalgue in Internet under fr infrmatin n accessries such as brushes, pads, drive plates with centerlck etc. Wrking lights (Fig. 18/1) ( ) Area f use: T enable use f the vehicle even in badly lit areas. Cab safety rf (Fig. 18/2) (7582) Area f use: T prtect the driver, e.g. frm parts which culd fall frm high rack warehuses. Including rear-view mirrr. Pay attentin that assembly f a cab safety rf is made cmpulsry when the vehicle is perated in such risk areas. Flashing beacn (Fig. 18/3) ( Assembly n cab safety rf) ( Assembly n ple / withut cab safety rf) Area f use: T imprve awareness f the vehicle when in use. Spray/Vacuum tl (Fig. 18/4) Area f use: Areas which are difficult t access can be cleaned manually with a spraying and vacuuming tl. A hlder can be installed n the lefthand side f the vehicle t fix the spray/vacuum tl. Tw hles are already drilled in the left-hand side f the vehicle fr this. The fllwing belng t the spray/vacuum tl: - Flr scrubbing tl (7009) - Suctin and spraying hse (7766) - Tl hlder and attachment parts ( ) The crrespnding buttns are prvided n the left perating panel with which t perate the spray/vacuum tl: - Vacuuming tl n/ff switch: Press the buttn t switch the fresh water supply n and ff (Fig. 21/14). - Press the reduce fresh water quantity buttn (Fig. 21/13) r increase fresh water quantity buttn (Fig. 21/15) t set the required water quantity, als refer t Sectin "Keypad t cntrl the 36

37 Operatin fresh water supply (Fig. 21/12). - Press the squeegee and suctin turbine buttn (Fig. 21/10) t switch the suctin turbine n r ff. When the spray/vacuum tl is in peratin, the scrubberdrier's parking brake must be applied. The spray/vacuum tl nly functins when nbdy is sitting n the driver's seat and the parking brake is applied. Hand-held vacuum cleaner (Fig. 18/4) Area f use: Fr vacuuming up water manually in areas which are difficult t access. The hand-held vacuum cleaner can be fixed t the tl hlder (refer t spray-vacuum tl). The hand-held vacuum cleaner cntains: - Adapter t cnnect the fllwing tls (7893) - Suctin hse (flexible plastic extensin hse), length: 9.8 ft (7880) - Suctin pipe (fr cnnectin t the plastic extensin hse), length: 4.3 ft (7881) - Suctin nzzle with rubber lips (7883) Operatin f the hand-held vacuum cleaner: refer t Spray/Vacuum Tl, page 36. Side brush cllisin prtectin (Fig. 18/5) ( ) The cllisin prtectin fr the tw side brushes n the presweep/vacuum unit cnsists f tw angled steel bars which can be assembled at the frnt left and frnt right f the pre-sweep/vacuum unit (Fig. 15/4) and prtect the scrubberdrier frm damage caused by cllisins. Side cllisin prtectin (Fig. 18/6) ( ) The side cllisin prtectin cnsists f tw steel bars which can be assembled n the right and left-hand sides f the vehicle at the height f the disk brushes and deflectrs t prtect the scrubber drier frm damage cause by cllisins. The side cllisin prtectin can be disassembled quickly withut the need f any tls. 37

38 Operatin Chemical dsing system (Fig. 19/1) ( ) The chemical dsing system adds a chemical cleaning agent t the fresh water. The chemical cleaning agent is in a canister (Fig. 19/2) and is nt part f the scpe f delivery f the chemical dsing system. 1 2 Fig

39 Operatin 3.2 Operating and indicatr elements Operating elements in the driver's cab 1 Steering wheel 2 Left-hand perating panel 3 Safety catch (t release the parking brake) 4 Parking brake 5 Directin switch (frwards/reverse) 6 Right-hand perating panel 7 Service brake 8 Acceleratr pedal fr speed cntrl f frward and reverse drive Fig

40 Operatin Steering wheel (Fig. 20/1) The scrubber-drier is steered by the steering wheel. Left-hand perating panel (Fig. 20/2) This perating panel cntains all the buttns fr the electrnically cntrlled, standard cleaning prgrams. Individual functins can be added r remved frm the cleaning prcess, as necessary. All the buttns are prvided with clearly descriptive labels. The green cntrl lamps in the perating buttns serve as functin indicatrs. The significance and functining methd f the individual buttns n this perating panel is described in paragraph Safety catch (Fig. 20/3) The safety catch serves t release the parking brake when applied. Operating sequence t release brake: - Tread n the pedal slightly. - Press the catch dwn. - Release the pedal. Parking brake (Fig. 20/4) The pedal t the left f the steering clumn serves t apply the parking brake t the rear wheels. When the parking brake is applied, the crrespnding cntrl lamp n the perating panel (Fig. 21/4) lights up red. If the driving directin switch is actuated while the parking brake is applied, an intermittent "beep" is issued. Befre getting ut f the vehicle apply the parking brake, set the driving directin switch (Fig. 20/5) t its neutral psitin and switch the key switch t ff. Drive directin switch (frwards/reverse) (Fig. 20/5) It serves t select the driving directin: - Frward: cntrl switch frward - Reverse: cntrl switch back - Stp: cntrl switch in center (neutral psitin) T change the driving directin, stp the vehicle by applying the service brake, select the new directin and accelerate again. 40

41 Operatin Right-hand perating panel (Fig. 20/6) This perating panel cntains the key switch t switch the vehicle n and ff, the hrn and a range f switches t perate the ptinal equipment, als refer t paragraph Service brake (Fig. 20/7) In rder t slw the vehicle dwn and bring the scrubber-drier t a stp, tread n the ft pedal t the left f the acceleratr (as with a nrmal vehicle) t actuate the hydraulic service brake. Acceleratr t drive frwards and backwards (Fig. 20/8) The pedal n the right serves t cntrl the driving speed (as in a nrmal vehicle). Befre actuating the acceleratr, use the driving directin switch (Fig. 20/5) t set the directin f travel: frwards r reverse. Frwards r reverse (accrding t the driving directin switch setting): Press the acceleratr frward and dwn slwly. Release the pedal: The speed is autmatically reduced, slwly. The vehicle rlls t a stp until reaching its zer setting. T stp securely, apply the service brake (Fig. 20/7). The speed fr frward drive is apprx. 5.0 mph and fr reverse drive apprx. 2.5 mph. The wrking speed when the brushes are switched n, the squeegee is lwered and presweep/vacuum unit is apprx. 4.4 mph. An acustic warning signal (buzzer) is issued shuld the drive mtr verlad. At the same time, the red alarm lamp (Fig. 20/5) lights up in the lefthand perating panel (Fig. 21/2) and the driving speed is reduced by apprx. 50%. In additin, an errr cde appears in the service indicatr (Fig. 21/6). 41

42 Operatin Left-hand perating panel (Fig. 21) 1 Indicatr field 2 Recvery tank indicatr: When the cntrl lamp is n (yellw), the maximum fill level has been reached. 3 Dirt hpper and frnt flap indicatr f the pre-sweep/vacuum unit 4 Parking brake indicatr: When the cntrl lamp is n (red), the brake is applied. 5 Alarm indicatr: When the cntrl lamp is n (red), a functinal fault has ccurred. 6 Operating hur cunter and service indicatr 7 Battery and charge cntrl indicatr 8 Buttn fr brush pressure 9 Buttn fr brush drive 10 Buttn fr squeegee and suctin turbine 11 Buttn fr simultaneus activatin f the scrubbing unit and vacuuming functin 12 Buttns fr cntrlling the fresh water supply Cntinued n next page Fig

43 Operatin - Cntinued - 13 Buttn t reduce fresh water quantity 14 Buttn t switch fresh water supply n and ff 15 Buttn t increase fresh water quantity 16 Buttn fr simultaneus activatin f pre-sweep/vacuum unit, scrubbing unit and vacuuming functin Indicatr field (Fig. 21/1) The indicatr field enables the scrubber-drier t prvide feedback n the perating status f the vehicle. This nly relates t perating states which cannt be switched n and ff via the perating panel: recvery tank full, dirt hpper fr pre-sweep/vacuum unit full, parking brake applied and errr message. The individual buttns and functins are described in detail belw: Indicatr fr recvery tank maximum fill level (Fig. 21/2) The yellw cntrl lamp lights up when the recvery tank has reached its maximum fill level. Als, a "beep" signal is issued every 15 secnds. In this case, a flat switch switches the suctin turbine ff and the squeegee is raised. Dirt hpper and frnt flap indicatr f the presweep/vacuum unit (Fig. 21/3) The cntrl lamp lights up red when the dirt hpper is nt prperly inserted (engaged) r the frnt flap is nt prperly clsed. Indicatr fr parking brake applied (Fig. 21/4) The cntrl lamp lights up red when the parking brake has been actuated via the pedal t the left f the steering clumn. If the tractin drive is switched n, an acustic signal is als issued. 43

44 Operatin Indicatr fr functin faults (Fig. 21/5) The cntrl lamp lights up red when ne f the fllwing faults ccurs: Thermstatic switch f the brush mtr, drive mtr r cylindrical brush has switched ff One f the safety fuses is defective r an electrnic fuse has been tripped. Anther fault has ccurred. At the same time, a fur-digit cde appears in the display f the service indicatr (Fig. 21/6). This errr cde infers which fault has ccurred (refer t Sectin 3.5.1). At the same time, the cntrl lamps flash and an acustic signal is issued. Operating hur cunter (Fig. 21/6) The fur-digit LED serves t display the perating hurs. When the key in the key switch is turned n, ne and then tw fur-digit cdes appear in successin (fr further details, refer t page 48, Key switch (Fig. 22/6)). The perating hurs appear after this. The cunter nly perates when cnsumers are switched n (e.g. drive r brush mtr, suctin turbine r presweep/vacuum unit). At the same time, a red dt flashes at the bttm right f the display. Service indicatr (Fig. 21/6) The fur-digit LED serves fr a mre accurate determinatin f functin faults. If a fault ccurs during peratin, a furdigit cde (errr cde) appears in the service indicatr display. At the same time, the fur dts f the errr cde flash in the display and an acustic signal is issued. The cntrl lamp indicating functinal faults lights up red. Sectin prvides an verview f the errr cdes which help yu clear functinal faults yurself. Clear the fault befre starting t use the vehicle again. If yu cannt clear the fault yurself, nte dwn the errr cde and infrm the authrized PwerBss dealer respnsible fr yur vehicle. 44

45 Operatin Battery and charge cntrl indicatr (Fig. 21/7) After switching n the key switch, all fur lamps light up when the battery is fully charged. As the battery is discharged during peratin, the three right-hand lamps indicate the level f discharge by ging ut in sequence frm right t left. When the left, red lamp flashes, it indicates that wrk must cme t an end. Apprximately three minutes later, the brushes will return t their hme psitin. After a further three minutes, the suctin turbine is deactivated and the squeegee is raised. When the red lamp lights up cntinuusly, apprximately ne minute remains until the entire vehicle shuts dwn autmatically. Drive back t the charger in gd time. Take the distance t the charger int accunt. Buttn fr brush pressure (Fig. 21/8) This buttn is used t increase the brush pressure. This may be necessary when the area t be cleaned is extremely dirty. The pressing frce can be increased t max. 205 lbs. If the functin is active, the green cntrl lamp lights up. Wrking with an increased brush pressure als means increased brush wear. Therefre, nly press this buttn when necessary. Buttn fr the brush drive (Fig. 21/9) This buttn serves t switch the brushes and fresh water supply n and ff with simultaneus, respective lwering and raising f the brush head. If the functin is active, the green cntrl lamp lights up. 45

46 Operatin Buttn fr squeegee and suctin turbine (Fig. 21/10) This buttn serves t switch the suctin turbine n and ff with simultaneus lwering and raising f the squeegee. If the functin is active, the green cntrl lamp lights up. This buttn must als be pressed when wrking with ptinal tls cnnected t a suctin hse. Operating persnnel must nt be seated n the driver's seat in this case (seat cntact is bypassed). Only the suctin turbine is activated at this pint, the squeegee remains raised. Buttn fr simultaneus activatin f the scrubbing unit and vacuuming functin (Fig. 21/11) After pressing the buttn, the mst imprtant basic functins fr standard cleaning are autmatically activated/deactivated in the crrect sequence f use: suctin turbine, brush rtatin, fresh water supply and lwering r raising the brushes and squeegee. When the vehicle is ready fr use in accrdance with requirements, it can be set int peratin simply and quickly by pressing the buttn. When the buttn has been pressed, the green cntrl lamp lights up. Buttns cntrlling the fresh water supply (Fig. 21/12) The fresh water cnsumptin used during cleaning can be regulated in seven stages. Accrdingly, there are seven green cntrl lamps n the keypad. Each lamp relates t ne stage. The maximum quantity which can be used fr cleaning is 2.0 gal/min (all seven lamps are n). The minimum quantity is 0.3 gal/min (nly the left lamp is n). The last fresh water quantity selected is always used. When the scrubbing prgram is switched n fr the first time, a fresh water quantity f apprx. 0.9 gal/min is autmatically set. 46

47 Operatin Buttn t reduce fresh water quantity (Fig. 21/13) The buttn serves t reduce the fresh water quantity supplied t the brushes. The fresh water quantity can be reduced in seven stages (see abve). The stage selected remains prgrammed, even if the vehicle is switched ff in the meantime. Buttn t switch the fresh water supply n and ff (Fig. 21/14) This buttn serves t switch the fresh water supply n and ff when the brush head is lwered r when using the spray/vacuum tl. The water quantity previusly set remains unchanged. Buttn t increase fresh water quantity (Fig. 21/15) The buttn serves t increase the fresh water quantity supplied t the brushes. The fresh water quantity can be increased in seven stages (see abve). The stage selected remains prgrammed, even if the vehicle is switched ff in the meantime. Buttn fr simultaneus activatin f presweep/vacuum unit, scrubbing unit and vacuuming functin (Fig. 21/16) This buttn serves fr simultaneus activatin/deactivatin f the pre-sweep/vacuum unit, brushes, suctin turbine and water supply as well as lwering r raising the cylindrical brush including side brush, brushes and squeegee. 47

48 Operatin Right-hand perating panel (Fig. 22) 1 Operating buttns fr presweep/vacuum unit 2 Buttn fr agitating device 3 Buttn fr extractr fan 4 Buttn t switch pre-sweep/vacuum unit n and ff 5 Buttn has n functin 6 Key switch 7 Hrn 8 Buttns fr chemical dsage ptin 9 Reduce quantity f cleaning agent 10 Buttn t switch chemical dsage ptin n/ff 11 Increase quantity f cleaning agent 12 Buttn has n functin 13 Switch fr wrking lights 14 Switch fr flashing beacn Fig

49 Operatin If ptinal accessries are nt assembled, the crrespnding buttns have n functin. Buttn fr agitating device (Fig. 22/2) This buttn serves t switch an agitatin prcess n and ff, whereby the filter system n the pre-sweep/vacuum unit is cleared f the dust attached. After pressing the buttn, an agitatin prcess runs fr apprx. 6 secnds in intervals; press the buttn again t end the prcess prematurely. Alternatively t pressing the buttn, yu can turn the key switch t psitin 0 and 1 (RESET). Buttn fr extractr fan (Fig. 22/3) This buttn serves t switch the extractr fan f the filter system n and ff. The filter system is part f the presweep/vacuum unit. Buttn t switch the presweep/vacuum unit n and ff (Fig. 22/4) This buttn is used t switch the pre-sweep/vacuum unit n and ff. 49

50 Operatin Key switch (Fig. 22/6) It serves t switch the electrical installatins n and ff and t secure the vehicle against unauthrized use. When the key switch is switched n (lck psitin 1), the fllwing appear in the perating hur cunter display (lefthand perating panel, refer t "Operating hur cunter" in paragraph 3.2.2): 1 Sftware versin Displayed fr apprx. 1 secnd. Example: 2 Errr cde Indicates the errr cde f the last fault which ccurred and is displayed fr apprx. 2 secnds. The display serves as infrmatin fr the service technician s that the fault can be cleared quickly. Fr an verview f the errr cdes, refer t Sectin Example: When a functinal fault actually ccurs, an acustic signal is als issued and the red cntrl lamp n the alarm indicatr (Fig. 21/5) lights up. 3 Operating hur indicatr Cntinual display. Example: During peratin, the dts flash in the display. 4 Cntrl digits (ptinal) In the case f brand new vehicles, it is pssible that after switching n the key switch, this display als appears: The cntrl digits are fr internal cntrl purpses. The display changes t zer perating hurs after ne hur at the latest. The scrubber-drier is ready fr use while this display appears. The alarm indicatr is activated. 50

51 Operatin Hrn (Fig. 22/7) An acustic warning signal is issued n actuating the hrn knb. Buttn fr reducing the quantity f cleaning agent (Fig. 22/9) On pressing this buttn, the amunt f cleaning agent added t the fresh water is reduced. Buttn t switch chemical dsage ptin n/ff (Fig. 22/10) The chemical dsage can nly be switched n when the fresh water supply has been switched n befrehand (Fig. 21/14). Buttn fr increasing the quantity f cleaning agent (Fig. 22/11) On pressing this buttn, the amunt f cleaning agent added t the fresh water is increased. Switch fr wrking lights (Fig. 22/13) This switch switches the wrking lights n r ff. This ccurs even withut the key switch being turned n. The wrking lights are ptinal accessries. Switch fr flashing beacn (Fig. 22/14) The flashing beacn is an ptinal accessry. 51

52 Operatin Operating elements n the vehicle 1 Opening between the waste and fresh water tank. 2 Filter sieve 3 Fresh water tank filling neck 4 Lid lck 5 Cver, recvery tank 6 Cver, fresh water tank 7 Rear dr, right 8 Rear panel frame 9 Rear dr, left 10 Fresh water draining hse 11 Waste water draining hse 12 Rear panel frame lck Fig

53 Operatin Recvery tank (Fig. 23/2+5) The air intake filter (Fig. 23/2) is lcated under the recvery tank lid (Fig. 23/5) at the tp f the recvery tank and is cnnected t the end f the suctin pipe. It prevents carse dirt getting int the suctin turbines and must be checked r cleaned daily, refer t Sectin Fresh water tank (Fig. 23/3+6) In rder t fill fresh water and cleaning agent, pivt up the lid f the fresh water tank (Fig. 23/6) and lck it. The tank is filled thrugh the filling neck (Fig. 23/3), refer t Sectin Lid lck (Fig. 23/4) The lck prevents the lid falling shut. T lck the lid, mve the bar and latch in place. T release the lck, raise the lid a little and pivt the lck back a little. The lid lck functins in the same way n the fresh water tank and recvery tank. Rear drs (Fig. 23/7+9) Open the rear drs t access the draining hses fr waste water and fresh water. Waste water draining hse (Fig. 23/11) The draining hse fr waste water hked is in the left-hand rear dr. Only drain ff waste water thrugh this hse at an apprpriate lcatin, refer t Sectin Fresh water draining hse (Fig. 23/10) The draining hse fr fresh water hangs t the left f the suctin turbines. Only drain ff the fresh water thrugh this hse at an apprpriate lcatin, refer t Sectin Rear panel frame (Fig. 23/8+12) In rder, fr example, t access the flap t clean the recvery tank, the rear panel frame must be pened. T d this, pull the lck lever (Fig. 23/12) up and pen the unlcked rear panel frame (Fig. 23/8). 53

54 Operatin 13 Seat cnsle 14 Electrical cmpartments 15 Side dr Fig

55 Operatin Seat cnsle (Fig. 24/13) The driver's seat is munted n the seat cnsle. The seat cnsle can be pivted up using the handle in rder t access the batteries and electric system. Electrical cmpartments (Fig. 24/14) In the driver's cab, t the left and right f the steering clumn, are tw electrical cmpartments which must be pened by means f a special square wrench. The electrical cmpartments are nt prvided in the sense f glve cmpartments. Side dr (Fig. 24/15) The side drs are lcated t the left and right f the battery. The drs must be pivted pen in rder t change the batteries, refer t Sectins and

56 Operatin 3.3 Operatin The scrubber-drier can be perated n surfaces with a gradient f 6% fr maximally 3 minutes. The climbing capacities stipulated in this manual can and may nly be achieved with the battery specified in the Sectin Technical Data. Adapt yur driving style t the lcal cnditins (flr characteristics, persns in the vicinity, bstacles etc.). When cleaning n slpes, the tractin may be impaired Switching the vehicle n Please read Sectin 1 befre switching the vehicle n. When cnnecting the battery plug t the vehicle, switch the key switch t ff (lck psitin 0) befrehand. The vehicle is equipped with a safety shutdwn via a seat cntact. This means that it is essential fr perating persnnel t be seated in the driver's seat t be able t perate the vehicle. Ensure that the driving directin switch is in its neutral setting, refer t "Acceleratr fr driving frwards and backwards" in Sectin Fig. 25 Actuate the service brake with yur ft in rder t prevent accidentally accelerating the vehicle, refer t "Service brake" in Sectin Insert the key in the key switch (Fig. 25). Turn the key frm lck psitin 0 t psitin 1. The vehicle is ready t perate. Carry ut the fllwing steps s that the vehicle is ready t perate: Discnnect the battery plug frm the charger and cnnect it t the vehicle. 56

57 Operatin Accelerating Set the required driving directin with the directin switch: set the switch t the frnt t drive frward, set the switch t the rear t reverse. Release the parking brake, refer t "Safety catch" in Sectin Press the acceleratr dwn slwly with yur right ft until yu reach the required driving speed Stpping and parking Remve yur right ft frm the acceleratr t slw dwn. When the ft is fully remved frm the acceleratr, the vehicle rlls t a stp. Nw press the right ft n the service brake pedal t stp the vehicle and bring it t a stp. Turn the key in the key switch cunterclckwise t lck psitin 0 and remve the key. Press the left ft n the parking brake pedal t park the vehicle. Always apply the parking brake and remve the key befre getting ut f the vehicle! Cleaning If the hand-held vacuum cleaner r spray/vacuum tl ptin is assembled, there are a ttal f six cleaning prgrams available fr selectin: 1. Sweeping 2. Sweeping, wet scrubbing and vacuuming dry 3. Wet scrubbing and vacuuming dry 4. Wet scrubbing (basic cleaning) 5. Vacuuming dry 6. Wrking using the additinal scrubbing and vacuuming tl (spray/vacuum tl) / vacuuming with the suctin hse (ptin) The cleaning prgrams are activated via the left-hand perating panel, refer t Sectin Press the relevant buttn as sn as the scrubber-drier is ready t perate (see abve). 57

58 Operatin Sweeping Press the "Buttn fr switching the presweep/vacuum unit n/ff" (Fig. 22/4) n the right-hand perating panel. Varius functins can be switched n r ff with the fllwing buttns: Switch extractr fan n/ff (Fig. 22/3) If the grund is wet, always switch the vacuum fan ff! Actuate the agitating device (Fig. 22/2) Once a day with nrmal use. Sweeping, wet scrubbing and vacuuming dry This prgram is the standard cleaning prgram. Press the "Buttn t switch the presweep/vacuum unit, scrubbing unit and vacuum n simultaneusly" (Fig. 21/16) n the left-hand perating panel. Varius functins can be switched n r ff with the fllwing buttns accrding t the cnditins at the lcatin f use: Increase brush pressure (Fig. 26/1) Fresh water feed n/ff (Fig. 26/3) Reduce fresh water quantity (Fig. 26/2) Increase fresh water quantity (Fig. 26/4) Wet scrubbing and vacuuming dry This prgram is a standard cleaning prgram fr this vehicle. Press the "Buttn t switch the scrubbing unit and vacuum n simultaneusly" (Fig. 22/11) n the lefthand perating panel. Varius functins can be switched n r ff with the fllwing buttns accrding t the cnditins at the lcatin f use: Fig Increase brush pressure (Fig. 26/1) Fresh water supply n/ff (Fig. 26/3) Reduce fresh water quantity (Fig. 26/2) Increase fresh water quantity (Fig. 26/4) 58

59 Operatin Check whether the flr is sufficiently dry at regular intervals, therwise peple culd slip. If the flr is excessively wet, check the vehicle fr leaks and that the sealing strips are in a gd cnditin. If the sealing strips are damaged, change them; refer t Sectin Wet scrubbing (basic cleaning) If yu d nt want t vacuum the flr dry in the same wrking prcedure because yu want the slutin t sak int the dirt, fr example, activate this prgram. Wet flrs are a ptential risk fr slipping! Ensure t prvide the crrespnding infrmatin and warning signs. Press the Buttn fr the brush drive (Fig. 21/9) n the left-hand perating panel. Varius functins can be switched n r ff with the fllwing buttns accrding t the cnditins at the lcatin f use: Reduce water quantity (Fig. 26/2) Increase water quantity (Fig. 26/4) Fresh water feed n/ff (Fig. 26/3) Increase brush pressure (Fig. 26/1) Vacuuming dry Press the Buttn fr squeegee and suctin turbine (Fig. 21/10) n the left-hand perating panel. Check whether the flr is sufficiently dry at regular intervals, therwise peple culd slip. If the flr is excessively wet, check the vehicle fr leaks and that the sealing strips are in a gd cnditin. If the sealing strips are damaged, change them; refer t Sectin

60 Operatin Vacuuming with the suctin hse The suctin hse is an ptinal accessry and part f the spray/vacuum tl functin. When the suctin hse is in peratin, the scrubber drier's parking brake must be applied. Vacuuming with the suctin hse nly wrks when the peratr is nt seated n the driver's seat (seat cntact switch is nt actuated) and the parking brake is applied. 1. Press the Buttn t switch the fresh water supply n and ff (Fig. 21/14) n the lefthand perating panel t switch the water n and ff. 2. Press the Buttn fr squeegee and suctin turbine (Fig. 21/10) n the left-hand perating panel t switch the suctin turbine n and ff. The squeegee remains raised. Useful tips fr cleaning Sweep the flr befre starting wet cleaning. This nt nly imprves the cleaning effect but als reduces the vehicle's liability t wear. The flr shuld be treated twice in the case f particularly dirty flrs r t remve wax (basic cleaning). - During the first cleaning prcess, the flr is scrubbed with a cleaning agent dsage apprpriate t the degree f siling, whereby the squeegee is raised. - Let the cleaning slutin wrk int the flr fr 5 t 10 minutes accrding t the manufacturer's infrmatin. - Then scrub the flr again with the squeegee lwered. Observe the crrect dsage f the cleaning agent. Infrmatin n dsage is prvided n the cleaning agent cntainer. Use the manufacturer's infrmatin as an initial basis. Practical experience will ensure that yu quickly find ut which is the right PwerBss cleaning agent and the ptimum dsage t suit yur needs. 60

61 Operatin The crrect dsage helps t reduce csts and prtect the envirnment. The develpment f excessive fam impairs the vehicle's functin. Cause: T much cleaning agent leads t certain cmpnent parts f it getting int the waste water resulting in the develpment f fam. This indicates that the amunt and mixture f slutin d nt match the level f dirt Switching the vehicle ff Apply the parking brake! 1. Turn the key frm psitin 1 t lck psitin 0. The vehicle is n lnger ready t perate. 2. Remve the key frm the key switch. Check that the wrking lights are switched ff. The wrking lights can be switched n even when the vehicle is switched ff and, thus, drain the battery Lading and transprting the vehicle Refer t Sectin

62 Operatin 3.4 After finishing wrk 1. Drive t a suitable service r parking area. An apprpriate service and parking area must have a slid flr, have a rf and ensure that n hazardus substances (e.g. ils, battery acid, cleaning agents, etc.) can get nt the flr r in the sewage system. 2. Stp the vehicle and switch it ff. Befre getting ut f the vehicle apply the parking brake, switch ff the key switch and remve the key. Check that the wrking lights are switched ff. The wrking lights can be switched n even when the vehicle is switched ff and, thus, drain the battery. 3. Empty and clean the recvery tank, refer t Sectins and Observe the applicable laws and lcal regulatins when dispsing f cleaning agents. 4. Check the fresh water filter, refer t Sectin Check the sealing strips and suctin hse, refer t Sectin Check the electrical equipment, functins and settings. 7. Clean the vehicle, refer t Sectin It is nt permitted t clean the vehicle with a pressure washer r steam blaster. 8. Charge the batteries, refer t Sectin The seat cnsle must remain pen during the charging prcess (therwise there is a risk f xyhydrgen develping). If the machine is t be shutdwn fr a lnger perid, the fresh water tank must be emptied. 62

63 Operatin 3.5 Functin faults The fllwing applies when lcating and clearing faults: Switch the vehicle ff, remve the key frm the key switch and discnnect the battery plug! Errr cde table In the case f system errrs, a fur-digit errr cde appears in the left-hand perating panel in additin t the service indicatr (wrench symbl). The dts in the errr/service cde flash. Clear the fault r nte dwn the errr/service cde and infrm yur authrized PwerBss dealer. Errr cde Fault Cause Slutin Brushes remain stpped because the thermstatic switch has been tripped Brushes remain stpped because the thermstatic switch f the third, middle brush has been tripped Brushes remain stpped because the anti-blcking system has been tripped. The mtr has verheated; freign bdies have pssibly jammed between the brush and shaft (e.g. tape and such). The mtr has verheated; freign bdies have pssibly jammed between the brush and shaft (e.g. tape and such). Freign bdies (e.g. tape r such) blck the brushes Check the brushes fr freign bdies and remve them, as necessary. Allw the mtr t cl dwn. If the prblem reccurs, determine the cause f verheating; cntact an authrized PwerBss service center, if necessary. Check the brush fr freign bdies, remve them as necessary. Allw the mtr t cl dwn. If the prblem reccurs, determine the cause f verheating; cntact an authrized PwerBss service center, if necessary. Check the brushes fr freign bdies and remve them, as necessary. 63

64 Operatin Errr cde Fault Cause Slutin Brushes remain stpped because the anti-blcking system f the third, middle brush has been tripped The brush attachment and brush mtrs have been switched ff because the anti-blcking system has been tripped Squeegee hlding attachment has been switched ff because the anti-blcking system has been tripped Cylindrical brush remains stpped because the thermstatic switch has been tripped Cylindrical brush remains stpped because the antiblcking system has been tripped. Freign bdies (e.g. tape r such) blck the brushes Freign bdies between the brush head and vehicle. Freign bdies between the squeegee and vehicle. Squeegee is jammed The mtr has verheated. Freign bdies (e.g. tape r such) pssibly blck the cylindrical brush. Freign bdies (e.g. tape r such) blck the cylindrical brush. Check the brush fr freign bdies, remve them as necessary. Check the brush head fr freign bdies and remve them, as necessary. Check the squeegee attachment fr freign bdies and remve them, as necessary Free the squeegee. Check the cylindrical brush fr freign bdies and remve them, as necessary. Allw the mtr t cl dwn. If the prblem reccurs, determine the cause f verheating; cntact an authrized PwerBss service center, if necessary. Check the cylindrical brush fr freign bdies and remve them, as necessary. 64

65 Operatin Errr cde Fault Cause Slutin Cylindrical brush hlding attachment has been switched ff because the anti-blcking system has been tripped The left side brush remains stpped because the antiblcking system has been tripped The right-hand side brush remains stpped because the anti-blcking system has been tripped Drive mtr is t ht / Drive mtr switches t 50% pwer utput. Freign bdies (e.g. tape r such) between the cylindrical brush and machine. Freign bdies (e.g. tape r such) blck the side brush. Freign bdies (e.g. tape r such) blck the side brush. Engine is verladed, pssibly after driving up slpes. Parking brake was actuated while driving. Check the cylindrical brush hlding attachment fr freign bdies, remve them as necessary. Check the side brushes fr freign bdies and remve them, as necessary. Check the side brushes fr freign bdies and remve them, as necessary. Allw the mtr t cl dwn. Check whether the parking brake is applied and release it, if necessary Other functin faults The vehicle des nt wrk Check the fuses, refer t Sectin In the event f faults in the tractin drive, stp the vehicle immediately, apply the parking brake and remve the key! 65

66 Technical Data 4 Technical Data Dimensins Vehicle length (with brush head, squeegee and pre-sweep/vacuum unit) in Vehicle height, withut/with cab safety rf in 55.1/78.7 Vehicle width with squeegee and pre-sweep/vacuum unit in 52.4 Vehicle width with side cllisin prtectin ptin in 54.7 Wrking width Brush head in 48.4 Squeegee in 49.6 Pre-sweep/vacuum unit in 54.3 Area cverage Theretical at 4.4 mph ft²/h Weights Dead weight (withut driving batteries, withut ptins, withut driver) lbs 2061 Ttal weight peratinal wet (withut ptins, withut driver) lbs 3549 Grss ttal weight lbs

67 Technical Data Axle lads Ready t use, frnt (fresh water tank full, including cab safety rf) lbs 1852 Ready t use, rear (fresh water tank full, including cab safety rf) lbs 1808 Driving perfrmance Driving speed, frwards/reverse mph 5.0/2.5 Wrking speed, maximum, frwards mph 4.4 Climbing capacity, transprt mde (max. 15 secnds) % 15 Climbing capacity, wrk mde (max. 3 min) % 6 Turning circle diameter, uter ft 13.9 Turning in aisle: minimum aisle width ft 9.4 Operating time with ne battery charge h apprx. 2.5 Drive Drive mtr (P2) W 2000 Gear il fill quantity gal/sae 0.7/SAE 90 67

68 Technical Data Axles and wheels Wheelbase in 45.3 Gauge, rear in 34.6 Wheels, diameter/width in 12.2/4.7 Specific wheel pressure at permissible grss ttal weight, frnt ksi Specific wheel pressure at permissible grss ttal weight, rear (left/right) ksi 0.129/0.128 Tightening trque f wheel nuts, frnt/rear lb ft 103.3/103.3 Brakes Service brake: Hydraulic Drum brakes at rear, with autmatic adjustment: diameter/width in 7.1/1.6 Brake fluid (e.g. ATE) gal 0.1 Parking brake: Cable brake at rear, adjustable: diameter/width in 7.1/1.6 Tank vlume Membrane panel tank: fresh/waste water gal 81.9/81.9 Flw rate, adjustable frm/t gal/min. 0.3/2.0 68

69 Technical Data Brush head N. f brushes Qty. 3 Brush diameter in 16.9 Brush speed rpm 210 Brush mtr pwer utput (P2) W 3 x 710 Brush pressure, nrmal/increased lbs 150/205 Specific cntact pressure nrmal/increased psi 0.3/0.42 Suctin turbines Pwer cnsumptin/speed W/rpm 635/13867 Air flw rate ft 3 /h 8476 Vacuum psi (mmwc) 2.94 (2030) Electrical installatin Pwer supply VDC 36 Type f current DC Nminal pwer, ttal W 7600 Prtectin class VDE 0700 III Battery cmpartment: length/width/height in 37.4/24.0/

70 Technical Data Nise emissin value The sund pwer level (L WAd ) measured accrding t EN under nrmal under wrking cnditins is: db (A) 90 The sund pressure level (L pa ) measured accrding t DIN EN (at the driver's ear) under nrmal wrking cnditins is: db (A) 76.5 Inaccuracy factr (KpA): db (A) 2 Vibratin The weighted, effective value f the vibratin, established in accrdance with ISO t which the upper limbs (hand-arm) are expsed under nrmal wrking cnditins is: m/s 2 < 2.5 The weighted, effective value f the vibratin and shck, established in accrdance with ISO , t which the bdy (feet and seat area) are expsed under nrmal wrking cnditins is: m/s 2 <

71 Technical Data Special equipment: Driving batteries Blck battery V/Ah 5 6 x 6/320 (CR395) Weight (including battery tray) lbs 794 Chemical dsing system Order number Cab safety rf (including rear-view mirrr) Order number 7582 Wrking lights, 2 pieces Order number V/W 2 x 24/70 Flashing beacn V 36 Fr installatin n the cab safety rf Order number Fr installatin n a ple (when n cab safety rf is available) Order number Cllisin prtectin Side cllisin prtectin (2 pieces) Order number Side brush cllisin prtectin (2 pieces) Order number

72 Technical Data Special equipment: Additinal scrubbing and vacuuming tls (spraying-vacuuming tl) Flr scrubbing tl Order number 7009 Vacuuming and spraying hse (length: 16.4 ft) Order number 7766 Tl hlder and attachment part Order number Additinal tls fr using the suctin hse (hand-held vacuum cleaner) Adapter t cnnect the fllwing tls Order number 7893 Suctin hse (length: 9.8 ft) Order number 7880 Suctin pipe (length: 4.3 ft) Order number 7881 Suctin nzzle with rubber lips Order number

73 Technical Data Pre-sweep/Vacuum unit Order number 7581 Dirt hpper vlume, theretical/practical gal 13.2/5.3 Fill weight, maximum lbs 60 Filter surface ft 2 16 Use categry ZH 1/487 KAT U Fan mtr W 234 Extractr fan, speed rpm 3200 Air flw rate ft 3 /h Vacuum in brush space mmwc 8.0 Cylindrical brush drive mtr (P1/P2) W 612/550 Cylindrical brush, length/diameter in 27.6/9.8 Cylindrical brush, minimum diameter in 7.1 Cylindrical brush speed rpm 510 Sweeping pattern width in Side brush drive mtr (P1) W 2x100 Side brush, diameter in 15.7 Side brush speed rpm

74 Technical Data Special equipment: Brushes (ttal f 3 are necessary) 5-cmpnent brush Order number 7685 Plastic PPN 0.5 fr light t medium accumulatins f dirt Order number 7806 Plastics mix K 901 fr light t medium accumulatin f dirt n structured flrs Order number 7816 Plastic PPN 0.8 fr light t heavy accumulatins f dirt Order number 7836 SIC PA 6 grain 180 gray fr basic cleaning and very heavy accumulatin f dirt Order number 7843 SIC PA 6.12 grain 120 green fr basic cleaning and extreme accumulatin f dirt Order number 7845 SIC PA 6 grain 600 gray Order number 7826 Superpads (ttal f 3 are necessary) Drive plate (pad hlder) with centerlck Order number 7857 Pads, red fr rutine cleaning (5 pieces in bx) Order number Pads, brwn fr rutine cleaning (5 pieces in bx) Order number Pads, black fr basic cleaning and heavy accumulatins f dirt Order number (5 pieces in bx) Micrfiber pad Order number

75 Maintenance and Service 5 Maintenance and Service General infrmatin It is essential t pay attentin t the infrmatin in Chapter "Safety Infrmatin" befre cmpleting any service r maintenance wrk! By adhering t the maintenance wrk recmmended by us, yu can be sure that the vehicle is always ready t be put int peratin. Maintenance and repair wrk necessary n a daily and weekly basis can be carried ut by a driver trained t cmplete the wrk, all ther PwerBss system maintenance may nly be cmpleted by persnnel wh are crrespndingly qualified and trained. In case f dubt, please cntact yur nearest PwerBss service center r authrized PwerBss dealer. Failure t bserve this annuls any rights t claims under the terms f guarantee in respect f resulting damage r cnsequential damage. Always specify the serial number, indicated n the rating plate, when making any inquiries and rders fr spare parts, refer t Sectin PwerBss system maintenance PwerBss system maintenance: ensures the PwerBss wrking vehicle is always ready fr peratin (preventive maintenance), minimizes perating csts, maintenance and repair csts, ensures the vehicle has a lng service life. The PwerBss system maintenance describes the specific technical wrk necessary fr the individual mdules and defines the intervals fr the maintenance tasks. Individual parts which must be changed during maintenance tasks are defined and stipulated in spare parts kits. PwerBss system maintenance, custmer: Wrk t be carried ut by the custmer accrding t the service and maintenance instructins in the perating manual (daily and weekly). Operating persnnel are given the necessary instructin by specialists when the vehicle is delivered. PwerBss system maintenance I: (Every 250 perating hurs r at least nce a year) Must be cmpleted by a skilled technician in an authrized PwerBss service center accrding t the vehiclespecific system maintenance with a spare parts kit. PwerBss system maintenance II: (Every 500 perating hurs r at least nce a year) Must be cmpleted by a skilled technician in an authrized PwerBss service center accrding t the vehiclespecific system maintenance with a spare parts kit. PwerBss system maintenance III/S: (Safety check, every 1000 perating hurs r at least nce a year) Must be cmpleted by a skilled technician in an authrized PwerBss service center accrding t the vehiclespecific system maintenance with a spare parts kit. 75

76 Maintenance and Service 5.2 Maintenance reprt Handver Upgrading Test drive Handver t custmer Instructin cmpleted n: PwerBss System Maintenance I 250 perating hurs Wrkshp Stamp PwerBss System Maintenance II 500 perating hurs Wrkshp Stamp PwerBss System Maintenance I 750 perating hurs Wrkshp Stamp at perating hurs cmpleted n: cmpleted n: cmpleted n: at perating hurs at perating hurs at perating hurs PwerBss System Maintenance III/S 1000 perating hurs Wrkshp Stamp PwerBss System Maintenance I 1250 perating hurs Wrkshp Stamp PwerBss System Maintenance II 1500 perating hurs Wrkshp Stamp PwerBss System Maintenance I 1750 perating hurs Wrkshp Stamp cmpleted n: cmpleted n: cmpleted n: cmpleted n: at perating hurs at perating hurs at perating hurs at perating hurs PwerBss System Maintenance III/S 2000 perating hurs Wrkshp Stamp PwerBss System Maintenance I 2250 perating hurs Wrkshp Stamp PwerBss System Maintenance II 2500 perating hurs Wrkshp Stamp PwerBss System Maintenance I 2750 perating hurs Wrkshp Stamp cmpleted n: cmpleted n: cmpleted n: cmpleted n: at perating hurs at perating hurs at perating hurs at perating hurs 76

77 Maintenance and Service 5.3 Maintenance schedule PwerBss system maintenance, custmer The fllwing maintenance wrk must be cmpleted by the custmer at the intervals stipulated. It relates t the daily and weekly maintenance wrk. Activity Directly prir t starting peratin: Fill the fresh water tank (dse the cleaning agent, fill fresh water) Befre r after peratin: Check the prperties f the deflectrs t the right and left and repair them r replace the deflectr rubber (left and right) as necessary Check the service brake in terms f its functinality and fr signs f leaks; repair as necessary Check the parking brake in terms f its functinality and fr signs f leaks; repair as necessary Check the squeegee is clean and fr signs f damage; pay special attentin that the supprt rllers run smthly and fr freign bdies, clear as necessary Interval Daily 77

78 Maintenance and Service Activity After the end f peratin: Empty the recvery tank Clean the recvery tank Clean the air intake filter in the recvery tank Clean the fresh water filter Empty the dirt hpper n the pre-sweep/vacuum unit (several times a day, if necessary) Clean the dirt hpper f the pre-sweep/vacuum unit Check the battery charge; recharge as necessary Interval Daily 78

79 Maintenance and Service Befre cmpleting the weekly maintenance wrk described belw, subject all the perating elements t a functin test in rder t check whether the vehicle is ready fr peratin. Activity Check the acid level f the battery and refill distilled water as necessary Check the electrical system (including wrking lights) and repair any defects Brush head: Check the deflectrs n the right and left and cmplete any repairs r rder spare parts and replace them as necessary Check the squeegee, particularly the rear sealing strip, is clean and fr signs f damage and wear and cmplete any repairs r rder spare parts and replace them as necessary Check the recvery tank thrugh the inspectin hle at the tp fr signs f premature wear (due t glass splinters, metal chips, grit, etc.) r damage and clean it Check the vehicle is clean; clean it, if necessary Check the brushes fr signs f wear; change, if necessary Cmplete a test drive and functin test (including brake tests) Interval Weekly 79

80 Maintenance and Service PwerBss system maintenance I The fllwing maintenance wrk must be cmpleted by an authrized PwerBss service center. Activity Check the battery in terms f acid level, acid density and vltage per cell; clear up any defects as necessary Change the gear il in the drive mtr Grease the rtary jint Check the service brake fr leaks, check the main brake cylinder and actuating rds, clear any defects Check the brake fluid in the service brake, tp up as necessary, bleed (Nte: brake fluid must be changed every 2 years!) Subject the service brake t a brake tests; clear any defects as necessary Check the parking brake fr actuating play; repair as necessary Subject the safety catch t a functin test (t release the parking brake) Check the steering fr steering play and adjust as necessary Lubricate and grease the steering Interval Every 250 perating hurs 80

81 Maintenance and Service Activity Check the trque f the wheel nuts; adjust as necessary Check the scrubbing unit and service as necessary: brushes, water retaining ring, brush catches, parallel alignment f hlding attachment Check the deflectrs n the scrubbing unit and replace them as necessary (left and right) Grease the scrubbing unit jints and cnnecting rds Check the recvery tank, particularly the lid sealing quality and filter sieve Change the O-rings in the draining hse and dsing valves Check the suctin hse is fitted prperly and fr signs f damage; clear any defects as necessary Test the squeegee functins: pivt, raise/lwer, deflecting rllers Check the frnt and rear sealing strips f the squeegee; change as necessary Interval Every 250 perating hurs 81

82 Maintenance and Service Activity Check the knurled nuts n the squeegee; change as necessary Grease the jints and cnnectin rds f the waste water vacuuming system Adjust the supprt rllers n the squeegee Check the vacuum at the suctin hse; clear any defects Check the electrical safety functins: parking brake, recvery tank flat switch Pre-sweep/vacuum unit: Check the tensin and prperties f the cylindrical brush drive fan belt; retensin r change as necessary Pre-sweep/vacuum unit: Check the cylindrical brush fr signs f wear and freign bdies (e.g. tape, wire, etc.), replace cylindrical brush if necessary Pre-sweep/vacuum unit: Check the brush swings smthly Pre-sweep/vacuum unit: Check the sweeping pattern Pre-sweep/vacuum unit: Check the cylindrical brush setting; adjust if necessary Pre-sweep/vacuum unit: Check the sealing strips in the brush space; change any defective sealing strips Pre-sweep/vacuum unit: Check side brush bristles fr wear; change if necessary Pre-sweep/vacuum unit: Check the filter system fr leaks; disassemble the filter element and clean it, change the filter element if defective Pre-sweep/vacuum unit: Check the functinality f the agitating mtr and extractr fan mtr Interval Every 250 perating hurs 82

83 Maintenance and Service Activity Check the vehicle's cnditin visually: clr, crrsin and presence f all signs and labels Check the vehicle is clean; clean it, if necessary Test drive and test all functin and safety-relevant cmpnent including brake tests Inspectin label Lgbk On request against separate accunt: driver training Interval Every 250 perating hurs 83

84 Maintenance and Service PwerBss system maintenance II The fllwing maintenance wrk must be cmpleted by an authrized PwerBss service center. Activity Cmplete all activities in PwerBss system maintenance I, see paragraph In additin: Check the brake linings f the service brake fr wear; readjust the service brake r change the brake linings as necessary Check the utput f the drive mtr (frwards, reverse); clear defects as necessary Check the carbn brushes f the drive mtr; replace, if necessary Check the perfrmance f the three brush mtrs; clear any defects as necessary Check the carbn brushes f the brush mtrs; replace, if necessary Including visual inspectin, test drive, test reprt, inspectin label and lgbk see paragraph Interval Every 500 perating hurs 84

85 Maintenance and Service PwerBss system maintenance III/S (safety check) The fllwing maintenance wrk must be cmpleted by an authrized PwerBss service center at least nce a year. Activity Cmplete all activities in PwerBss system maintenance I and II, see paragraph and paragraph In additin: Check the brake linings n the rear wheels; change as necessary Change the brake fluid in the service brake (Nte: brake fluid must be changed every 2 years!) Check the parking brake including pedal lck and cntrl lamp; clear any defects Grease the rtary jint f the tractin drive (2 lubricatin pints accessible frm the bttm) Clean carbn dust frm the electric mtrs f the wheel brush, suctin turbine and cylindrical brush drives and check the carbn brushes mve easily and fr signs f wear, change the carbn brushes, if necessary Safety test, drive electrnics Including visual inspectin, test drive, test reprt, inspectin label and lgbk see paragraph Interval Every 1000 perating hurs 85

86 Maintenance and Service 5.4 Battery system The scrubber-drier is perated by means f a lw-maintenance tray battery, refer t Sectins and 4. The battery is cmprised f 6 individual cells (mnblc batteries) in a serial circuit. 1 Battery and charge cntrl indicatr (including BMS indicatr) in left perating panel 2 Wiring diagram 3 Battery cnnectin cable 4 Battery plug in vehicle scket 5 Battery plug (discnnected) 6 Seat cnsle, pen 7 Battery intercnnectin cable 8 Insulatin cap Fig

87 Maintenance and Service General infrmatin n handling batteries Pay attentin t the safety infrmatin in Sectin 1.4 and Sectin as well as the infrmatin n servicing and maintenance in the battery dcuments. Als refer t the infrmatin in the supplementary sheet "Infrmatin n driving batteries". Always discnnect the battery plug befre starting any wrk n the electrical installatin. Batteries may nly be handled and changed by prperly skilled maintenance persnnel. Pay attentin t legal requirements and lcal directives Charging batteries Befre starting the vehicle up fr the first time, the batteries t be used must be prperly charged by implementing the initial battery charge rutine, refer t Sectin 2.2. PwerBss assumes n liability fr damage t the battery caused by a fault when the battery is charged fr the first time. There must be sufficient ventilatin in the charging area - risk f explsin! The seat cnsle (Fig. 27/6) must be pen during the battery charging prcess t prevent the develpment f explsive xyhydrgen! Only use the riginal charger and riginal adapter! Pay attentin that the insulatin is nt initially damaged and nt damaged during the charging prcess. The cable must nt rub against anything. D nt use the charger if the insulatin is damaged. We recmmend charging the battery when at least ne dt f the battery indicatr has gne ut after perating the machine. The indicatr (Fig. 27/5) als indicates the charge status f the batteries during the charging prcess. 1. Cnnect the battery plug (Fig. 27/4) t the adapter supplied. 2. Cnnect the free plug n the adapter t the battery charger. The battery charger is nt cntained in the scpe f delivery f the vehicle. Pay attentin t the infrmatin in the perating manual supplied with the charger and the manual frm battery manufacturer. D nt inhale battery gases. 87

88 Maintenance and Service Servicing the driving batteries Checking the acid level The battery acid level must be checked by the custmer n a weekly basis and distilled water must be tpped up, if necessary; als refer t Sectins and There must be n naked flames used in the vicinity when handling batteries, particularly when checking the acid level. Details n the filling prcess are cntained in the manual prvided with the water filling device. Spilled battery acid must never enter the sewage system in its initial frm, it must be neutralized befrehand: e.g. diluted with plenty f water r absrbed with granulate. Checking the acid density and vltage f each cell These pints must be checked and crrected at regular intervals within the scpe f PwerBss system maintenance by an authrized service center. Als refer t the infrmatin in the supplementary sheet "Infrmatin n driving batteries" Disassembling the battery 1. Park the vehicle n a level area f flr. Turn the key switch t psitin 0 and remve the key. 2. Open the side drs t the left and right (Fig. 28/3). 3. When yu are psitined n the right-hand side f the vehicle, take hld f the seat cnsle at the handle (Fig. 28/2) and pivt up twards the frnt. Pivt the seat cnsle (Fig. 28/1) pen frm the righthand side f the vehicle, therwise yur hands culd be crushed between the seat cnsle and cab safety rf (if fitted). 4. Discnnect the battery and vehicle plug (Fig. 28/4+5). When disassembling the batteries, use apprpriate lifting gear. 88

89 Maintenance and Service The battery may nly be disassembled using lifting gear by prperly trained persnnel. If the scrubber-drier is equipped with a cab safety rf, lift the batteries ut n the left-hand side f the battery. The cab safety rf has a recess fr the lifting gear rpe Lift the batteries ut f the vehicle using a lifting gear. Guide the lifting gear frm the left t the battery. 5 Fig

90 Maintenance and Service Installing the battery Set the key switch t psitin 0 (refer t sectin Key switch in Sectin 3.2.3) and remve the key. 1. Open the side drs t the left and right (Fig. 28/3). 2. Take hld f the seat cnsle (Fig. 28/1) at the handle (Fig. 28/2) and pivt it frwards t pen it. If a cab safety rf is fitted, pen the seat cnsle frm the right-hand side f the vehicle, therwise yur hands culd be crushed between the seat cnsle and cab safety rf. Install the 6 mnblc batteries int the tray in the vehicle frm the left-hand side f the vehicle using lifting gear r a frk-lift truck accrding t Figure 28. If the scrubber-drier is fitted with a cab safety rf, the battery can nly be installed frm the left-hand side f the vehicle; the cab safety rf is prvided with a recess fr the lifting gear rpe. When installing the battery, use apprpriate lifting gear. The battery may nly be installed using lifting gear by prperly trained persnnel. Cnnect the battery plug (Fig. 28/5) and vehicle scket (Fig. 28/4) t each ther. Ensure they are cnnected firmly Dispsing f batteries Used batteries with the recycling symbl cntain reusable cmmdities. The heavy metals cntained represent a majr risk bth t peple's health and t the envirnment. Never pen r damage batteries. Never tuch, inhale r swallw the cntent f batteries. Health hazard! D nt allw batteries t get int the envirnment. Risk f cntaminating the grund and water! In accrdance with symbl with the crssed ut garbage bin, these batteries must nt be dispsed f in dmestic waste. Return and recycling f ld batteries must be agreed n with the authrized PwerBss dealer in accrdance with natinal requirements. 90

91 Maintenance and Service Deep discharge signal transducer (BMS) The scrubber drier is equipped with a charge cntrl fr prtectin against deep discharge f the batteries. The deep discharge signal transducer (BMS) is integrated in the electrnic system and setup at the factry fr battery type GiS (digit in the service indicatr: N. 5). If ther batteries are used, the deep discharge signal transducer must be adjusted. The deep discharge signal transducer may nly be adjusted by an authrized PwerBss service center. Als refer t Sectin

92 Maintenance and Service 5.5 Fresh water tank 1 Lid seal 2 Lid 3 Opening t recvery tank (airing and venting) 4 Fresh water tank 5 Fresh water filter 6 Ball cck 7 Lck 8 Fresh water draining hse Fig

93 Maintenance and Service Filling the fresh water tank Fill the fresh water tank (Fig. 29/4) with fresh water and cleaning agent befre starting with the wrk, als refer t Sectin Park the machine n a level flr area. 2. Open the tank lid (Fig. 29/2) and lck in place. 3. Fill the fresh water tank t the maximum mark. Only fill water at maximally 122 F! 4. Mix cleaning agent in accrdance with the manufacturer's instructins. 5. Clse the lid (Fig. 29/2) n the fresh water tank. Filling the fresh water tank via the autmatic filling device Please bserve the guidelines prvided by the water supply cmpany. The vehicle must nt be cnnected directly t a public drinking water supply t prevent chemicals getting int the drinking water supply. A brief cnnectin is permitted, hwever, if a backflw preventer with pipe aeratr is installed in the supply line. A backflw preventer f the type EA 3 r EA 2 must be installed. 1. Open the rear drs n the left and right as well as the rear panel frame (Fig. 23/7-9). 2. Cnnect a filling hse (Fig. 30/3) with a cnnectin diameter f 0.7 in (3/4 inch). Fig Open the ball cck (Fig. 30/2). 4. Press the buttn fr the slenid valve (Fig. 30/1). This is lcated under the suctin turbine. The buttn fr the slenid valve (Fig. 30/1) can als be actuated when the key switch is switched ff

94 Maintenance and Service 5. Open the water tap n site. Only fill water at maximally 122 F! On reaching the maximum fill level, the flat switch in the fresh water tank clses the slenid valve autmatically. Check the flat switch regularly fr siling! 6. Clse the water tap n site. 7. Clse the ball cck (Fig. 30/2). 8. Discnnect the filling hse (Fig. 30/3). 9. Clse the rear drs n the left and right as well as the rear panel frame (Fig. 23/7-9). 10.Clse the lid (Fig. 29/2) n the fresh water tank. 11.Mix cleaning agent in accrdance with the manufacturer's instructins. 12.Clse the lid (Fig. 29/2) n the fresh water tank Emptying the fresh water tank If the vehicle is t be left unused fr a lnger perid, the fresh water tank (Fig. 29/4) shuld be emptied. 1. Park the vehicle s that the draining hse fr fresh water (Fig. 29/8) can be psitined ver a drain in the flr. 2. Open the left and right rear drs. 3. Open the rear panel frame. 4. Detach the fresh water draining hse (Fig. 29/8) and lwer it slwly. 5. Unscrew the cap (Fig. 29/7) t pen it. The quantity drained can be regulated by turning the screw cap and pivting the cap pen fully, if necessary. 6. When the fresh water tank has been cmpletely emptied, screw the cap shut again and attach the draining hse again. 7. Clse the rear panel frame. 8. Clse the left and right rear drs. When dispsing f the waste water cntaining the cleaning agent, bserve all applicable legal regulatins Cleaning the draining hse cap The screw cap (Fig. 29/7) at the end f the draining hse (Fig. 29/8) shuld be cleaned at regular intervals. Lubricate the O-ring lightly, if necessary Cleaning the fresh water filter The fresh water supply is equipped with a filter (Fig. 29/5) which must be cleaned if dirt appears n the cntainer. This is lcated n the left-hand side f the vehicle at the height f the brushes behind the side panel. 1. Clse the ball cck (Fig. 29/6) t prevent fresh water being supplied frm the tank. 2. Unscrew the cntainer by hand and pull the sieve insert ut dwnwards. 3. Clean bth parts with water and reassemble them. 94

95 Maintenance and Service 5.6 Recvery tank 1 Lid 2 Lid seal 3 Recvery tank 4 Air intake filter 5 Lck 6 Waste water draining hse 7 Cleaning flap Fig

96 Maintenance and Service Emptying the recvery tank The recvery tank (Fig. 31/3) must be emptied and flushed clean after finishing wrk. Observe the applicable laws and lcal regulatins when dispsing f waste water cntaining cleaning agents! 1. Park the vehicle s that the waste water draining hse (Fig. 31/6) can be psitined ver a drain in the flr. 2. Open the left and right rear drs. 3. Open the rear panel frame. 4. Detach the waste water draining hse (Fig. 31/6) and lwer it slwly. 5. Unscrew the cap (Fig. 31/5) t pen it. The quantity drained can be regulated by turning the cap and pivting the cap pen fully, if necessary. 6. When the recvery tank has been cmpletely emptied, screw the cap shut again and attach the draining hse again. If the recvery tank is extremely dirty, begin cleaning the tank straight away. 7. Clse the rear panel frame. 8. Clse the left and right rear drs Cleaning the recvery tank Clean the recvery tank (Fig. 31/3) every day r as necessary. The cleaning flap (Fig. 31/7) is available fr this. 1. Open the left and right rear drs. 2. Open the rear panel frame. 3. Empty the recvery tank, refer t Sectin Fig Pull ut the run-ff plate (Fig. 32/3). 5. Release the flap lck: turn the wing nuts (Fig. 32/1) cunterclckwise. 6. Open the cleaning flap (Fig. 32/2). 96

97 Maintenance and Service 7. Open the recvery tank lid (Fig. 31/1). 8. Flush the recvery tank with water filled frm the tp thrugh the pen tank lid. Cleaning may nly be carried ut using a water hse (perating pressure apprx t psi) and nly frm tp t bttm. D nt aim the jet f water directly at penings, slits, electrnic cmpnents, perating panels r seals. It is nt permitted t clean the vehicle with a high-pressure washer r with a steam blaster because the temperature is in excess f 212 F. Wear apprpriate glves fr prtectin against dirt, viruses, bacteria etc. when cleaning the cntainer. 9. After finishing cleaning the tank, clse the flap and push the run-ff plate back in place. 10.Unhk the waste water draining hse (Fig. 31/6), lwer it slwly and pen the cap (Fig. 31/5). 11.Run fresh water in the recvery tank thrugh the pen lid using a water hse (utput pressure apprx t psi) and, in ding s, als flushing the draining hse (see abve). 12.Screw the cap shut again and hk the draining hse back in place. 13.Clse the rear panel frame. 14.Clse the left and right rear drs. The cleaning flap must nt be used t drain ff waste water Cleaning the draining hse cap Clean the screw cap n the waste water draining hse (Fig. 31/6) daily. Lubricate the O-ring lightly, if necessary. 97

98 Maintenance and Service Cleaning the air intake filter The filter sieve (Fig. 33/1) is lcated in the recvery tank abve the maximum water level n the suctin pipe. The accumulatin f dirt in the filter sieve must be checked daily and cleaned as necessary: Pull the filter sieve frm the suctin pipe and clean with water. Remve the filter sieve cmpletely t clean it. During cleaning and peratin, pay attentin that n water and n particles f dirt get int the suctin pipe and int the suctin turbines. 2. Dry the filter sieve after cleaning. D nt replace when dripping wet! Cleaning the penings t the fresh water tank The penings between the recvery and fresh water tank (Fig. 33/2) serve fr ventilatin between the tw tanks. They must be checked regularly fr accumulatins f dirt and cleaned as necessary. Fig

99 Maintenance and Service 5.7 Scrubbing unit The scrubbing unit (Fig. 34/1) may nly be disassembled and assembled by prperly trained service persnnel. The brushes, part f the scrubbing unit, are nt cntained in the scpe f delivery. Select the brushes accrding t yur needs and install them n the brush head (Fig. 34/2) accrding t the instructins, refer t Sectin Please refer t Chapter 4 r ur spare parts catalgue n ur internet site at fr brushes etc Changing the brushes Check the brushes n the brush head weekly fr signs f wear. When the brushes have wrn t a bristle length f 0.6 in, the brushes must be replaced, refer t Sectin Befre wrking n the brushes, switch ff the scrubbing unit, turn the key switch t psitin 0 and remve the key. Fig

100 Maintenance and Service Installing new rubber deflectr strips 3 5 Fig Deflectrs 2 Rubber deflectr strips 3 Clamping rail 4 Clamping rail hks 5 Wing nuts 4 4 The deflectr (Fig. 35/1) must be fixed in its service psitin (refer t Sectin 2.3.1, Pint 1). 1. Unscrew the wing nut (Fig. 35/5) at the end f the deflectr. 2. Slide the clamping rail (Fig. 35/3) in the vehicle's driving directin (frwards) until the clamping rail hks (Fig. 35/4) are freed and the clamping rail (Fig. 35/3) can be remved away frm the vehicle. 3. Remve the ld rubber deflectr strips (Fig. 35/2). 4. Psitin the new rubber deflectr strips (Fig. 35/2) in place. 5. Munt the clamping rail (Fig. 35/3) frm the utside and slide back by hand s that the clamping rail hks (Fig. 35/4) engage. Screw the wing nut (Fig. 35/5) n the thread at the end f the clamping rail (Fig. 35/3), thus tightening the clamping rail (Fig. 35/3). 100

101 Maintenance and Service 5.8 Squeegee 1 Squeegee hlding attachment 2 Wing nuts 3 Cnnectin nzzle 4 Sealing strip (rear) 5 Supprt strip (rear) 6 Clamping rail (rear) 7 Supprt rller 8 Knurled nut The squeegee is als equipped with frnt sealing and supprt strips and clamping rail (Fig. 37) Cleaning the squeegee Inspect the squeegee when raised daily and clean as necessary Disassembling the squeegee 1. Insert the key in the key switch and turn the key switch n. 2. Lwer the squeegee: Press the buttn fr the squeegee and suctin turbine s that the green cntrl lamp lights up Fig Switch ff the key switch and remve the key. 4. Open the rear drs. 5. Pull the suctin hse frm the cnnectin nzzle (Fig. 36/3) f the squeegee. 6. Lsen the wing nuts (Fig. 36/2) n the hlding attachment. 7. Pull the squeegee away t the rear under the hlding attachment. 8. Insert the key in the key switch and turn the key switch n. 9. The squeegee is raised autmatically. 10.Clse the rear drs

102 Maintenance and Service Installing the squeegee Refer t Sectin Changing the sealing strips The sealing strips (Fig. 36/4) can be changed withut the need fr any tls: 1. Disassemble the squeegee, refer t Sectin Unscrew the knurled nuts (Fig. 36/8). 3. Remve the sealing strip, supprt strip and clamping rail (Fig. 36/4-6). Bth sides f the sealing strip can be used. 5. Tighten the knurled nuts (Fig. 36/8) evenly, starting frm the center and wrking n alternate sides. There must be n bends in the sealing strip. 6. Disassemble the frnt sealing strip (Fig. 37) in the same way. 7. After changing the sealing strips, check that the squeegee stands vertically n the flr. Otherwise, readjust the supprt rllers. When the vehicle is in peratin, the sealing strips must be bent a little t the rear when the squeegee is lwered. 4. Install the new r reversed sealing strips in the reverse wrking sequence. Pay attentin that bth sealing strips (frnt and rear) tuch the flr when munted. Fig

103 Maintenance and Service Adjusting the supprt rllers The squeegee stands with the sealing strips (Fig. 36/4) and supprt rllers (Fig. 36/7) n the grund. T increase the squeegee cntact surface f the sealing strips (Fig. 36/4) n the flr, e.g. fllwing wear f the sealing strips (Fig. 36/4), the supprt rllers (Fig. 36/7) must be set higher: 1. Psitin the squeegee f a level, slid surface. 2. Lsen the cunternuts in each supprt rller. 3. Adjust the supprt rllers (Fig. 36/7) n the right and left evenly: - Turn the screw cunterclckwise t raise the supprt rller. - Turn the screw clckwise t lwer the supprt rller. 4. Check the squeegee cntact surface and adjust, if necessary. 5. Tighten the cunternuts n each supprt rller (Fig. 36/7). 103

104 Maintenance and Service 5.9 Pre-sweep/Vacuum unit Set the key switch t psitin 0 fr all maintenance and repair wrk t prevent starting up the vehicle inadvertently! Emptying the dirt hpper The dirt hpper must be emptied and cleaned at least nce a day. If the vehicle is used fr several hurs a day, the dirt hpper must be checked and crrespndingly mre frequently emptied. 1 2 Remving the dirt hpper Only remve the hpper in the direct vicinity f the refuse dump/cllectin cntainer. 1. When the frnt hd is clsed, press the right and left lcks (Fig. 38/1) f the dirt hpper (Fig. 38/2) up t release the lck. The dirt hpper pivts dwn. 2. Take hld f the dirt hpper (Fig. 38/2) in bth hands using the grips lcated at the sides f the dirt hpper (Fig. 38/2). 3. Pull the dirt hpper (Fig. 38/2) t the frnt and ut f the guide rails. Fig Lck 2 Dirt hpper (The tp picture in Figure 38 illustrates the psitin f the left-hand lck when the frnt hd is pen.) 104

105 Maintenance and Service Emptying the dirt hpper Observe the applicable laws and lcal regulatins in respect f dispsal! Empty the cntent f the dirt hpper (Fig. 38/2) in a waste cntainer at regular intervals. Installing the dirt hpper 1. Take hld f the dirt hpper (Fig. 38/2) in bth hands using the grips lcated at the sides f the dirt hpper (Fig. 38/2). 2. Fit the dirt hpper (Fig. 38/2) in the guide rails, slide in as far as pssible and press the dirt hpper (Fig. 38/2) upwards until the lck audibly latches int place. If the dirt hpper (Fig. 38/2) is nt prperly engaged, the Dirt hpper and frnt flap indicatr f the pre-sweep/vacuum unit lamp (Fig. 21/3) lights up. The pre-sweep/vacuum unit des nt wrk Dust vacuum The filter system f the dust vacuum (use categry "U") is lcated in the filter case abve the dirt hpper (Fig. 38/2). The filter case is mvable, the mvement linked t that f the dirt hpper (Fig. 38/2) in rder t be able t shake the filter element (panel air filter) when the agitating mtr is switched n. Clearing the panel air filter f dust during peratin Clean the panel air filter (Fig. 39/2) in the dust vacuum regularly r as necessary using the agitating device: Press the Buttn fr agitating device (Fig. 22/2). After pressing the buttn, an intermittent agitating prcess runs fr apprx. 6 secnds. T end the intermittent agitating prcess prematurely, press the same buttn (Fig. 22/2) again. Alternatively: Turn the key switch t psitin 0 r 1 (RESET). Disassembling the panel air filter 1 Fig Filter case cver with agitating mtr 2 Filter element (panel air filter) 2 1. Open the frnt flap t the frnt. The engine must have stpped befre pening the frnt flap. Risk f injury! 2. Remve the straps hlding the filter case cver (Fig. 39/1). 3. Remve the filter case cver (Fig. 39/1). 105

106 Maintenance and Service 4. Remve the panel air filter (Fig. 39/2). Cleaning the panel air filter thrughly D nt inhale dusts. Health hazard! Always wear an apprpriate dust mask. Drp the panel air filter (Fig. 39/2) a few times, frm a suitable height, nt a slid surface. Ensure the filter ribs are nt damaged! The surface must nt have any irregularities. D nt let the panel air filter (Fig. 39/2) drp at a slant. D nt install panel air filters (Fig. 39/2) which have damaged filter ribs! Installing the panel air filter The panel air filter (Fig. 39/2) must be installed in the reverse sequence t disassembly, refer t paragraph Disassembling the panel air filter. T nt insert the panel air filter (Fig. 39/2) the wrng way rund! Pay attentin t the arrw n the frame f the panel air filter (Fig. 39/2)! The arrw must pint upwards Side brushes Side brush angle The crrect angle f the side brush is apprx. 5-8 twards the frnt and side, it is setup at the factry and cannt be altered. Adjusting the side brush cntact It may be necessary t readjust the side brush cntact surface depending n the wear f the bristles: 1. Sit n the driver's seat, insert the key in the key switch and turn t psitin Press the Buttn t switch the presweep/vacuum unit n and ff (Fig. 22/4) t lwer the side brush and cylindrical brush. 3. Turn the key switch t psitin 0 and remve the key. The cylindrical brush and side brush remain lwered. 4. Lsen the scket screw abve the deflectr plate. The scket screw is lcked by a hex nut. 106

107 Maintenance and Service 5. Slide the side brush including the deflectr plate dwn slightly n the brush shaft. The side brush cntact surface is crrect when apprx. 1/3 f the side brush circumference makes cntact with the grund. 6. Tighten the scket screw and lck it with the hex nut. Disassembling the side brush 1. Refer t paragraph Adjusting the side brush cntact, Pints Pull the side brush including deflectr plate dwnwards frm the brush shaft. 3. Unscrew the three hexagn head blts underneath the side brush and remve the side brush. Installing the side brush 1. Refer t paragraph Adjusting the side brush cntact, Pints Screw n the (new) side brush t the deflectr plate frm belw using three hexagn head blts. 3. Slide the side brush including deflectr plate frm belw n the brush shaft. 4. Adjust the side brush cntact surface crrectly, refer t paragraph Adjusting the side brush cntact Cylindrical brush Checking the sweeping pattern T prevent excessive bristle wear under nrmal wrking cnditins, check the sweeping pattern regularly: 1. Park the vehicle n a level, smth flr which is slightly dusty. 2. Sit n the driver's seat, insert the key in the key switch and turn t psitin Press the Buttn t switch the presweep/vacuum unit n and ff (Fig. 22/4) t start the side brushes and cylindrical brush rtating and t lwer them. 4. Allw the pre-sweep/vacuum unit t perate fr a shrt time while at a standstill. 5. Press the Buttn t switch the presweep/vacuum unit n and ff (Fig. 22/4) t stp the side brushes and cylindrical brush rtating and raise them. 6. Drive the vehicle frward a shrt way s that yu can see the sweeping pattern (sweeping strkes). 7. Assess the sweeping pattern: 107

108 Maintenance and Service Sweeping pattern is crrect: If the cylindrical brush is setup crrectly, the swept area n the flr frms a rectangle whse side edges are parallel. The shrt sides f the rectangle shuld measure in. If the sweeping pattern is brader than 2.0 in, the brush pressure is t high. If the sweeping pattern is narrwer than 1.2 in, the brush pressure is t lw. The shape f the sweeping pattern must be a rectangle and nt trapeze r wedge shaped! If the sweeping pattern is nt crrect, it must be adjusted; refer t paragraph Setting the sweeping pattern. Setting the sweeping pattern The adjusting devices fr the sweeping pattern can be accessed thrugh the penings in the side cllisin prtectin n bth sides f the vehicle. 1. Sit n the driver's seat, insert the key in the key switch and turn t psitin Press the Buttn t switch the presweep/vacuum unit n and ff (Fig. 22/4) t lwer the side brush and cylindrical brush. 3. Turn the key switch t psitin 0 and remve the key. The cylindrical brush and side brush remain lwered. 1 Fig. 40 All the adjustments must be made n bth sides f the vehicle! 2 1 Adjusting device fr sweeping pattern 2 Cunternut 4. Lsen the cunternuts (Fig. 40/2) n bth sides f the vehicle. 5. Turn the adjusting device (Fig. 40/1) n bth sides f the vehicle as described belw: - T make the sweeping pattern brader, turn cunterclckwise. - T make the sweeping pattern narrwer, turn clckwise. 6. Check the sweeping pattern, refer t paragraph Checking the sweeping pattern. 7. Repeat steps 1 t 7 until the sweeping pattern is set crrectly. 8. Tighten the cunternuts (Fig. 40/2) n bth sides f the vehicle. 108

109 Maintenance and Service Disassembling the cylindrical brush The cylindrical brush can nly be accessed frm the right-hand side f the vehicle. 1 Fig Knurled screw fr brush swing arm 2 Knurled screw fr brush space cver 3 Brush space cver 4 Brush swing arm 1. Sit n the driver's seat, insert the key in the key switch and turn t psitin Press the Buttn t switch the presweep/vacuum unit n and ff (Fig. 22/4) t lwer the side brush and cylindrical brush. 3. Turn the key switch t psitin 0 and remve the key. The cylindrical brush and side brush remain lwered. 4. Unscrew the knurled screw fr the brush swing arm (Fig. 41/1). 5. Pull ff the brush swing arm (Fig. 41/4). 6. Unscrew the knurled screw fr the brush space cver (Fig. 41/2). 7. Remve the brush space cver (Fig. 41/3). 8. Pull the cylindrical brush ut. Installing the cylindrical brush The cylindrical brush must be installed in the reverse sequence t disassembly, refer t paragraph Disassembling the cylindrical brush. 109

110 Maintenance and Service Changing the belt fr the cylindrical brush The cylindrical brush is driven by a belt n the left-hand side Fig. 42 The cver (Fig. 42/1) f the belt is fixed by tw screws (Fig. 42/2). 1. Remve the screws (Fig. 42/2). 2. Remve the belt cver (Fig. 42/1). 2 2 Fig Remve the belt (Fig. 43/1) frm the pulleys (Fig. 43/2+3). 4. Place a new belt in psitin. 5. Assemble the belt cver (Fig. 42/1) and fix with the screws (Fig. 42/2). The belt tensin is set by means f a spring munted tensin pulley (Fig. 43/3). 110

111 Maintenance and Service 5.10 Wheels The wheel nuts n the wheels (Fig. 44/1) must be subjected t their first check after 100 perating hurs and subsequently every 200 hurs. Fig. 44 The tightening trque fr the wheel nuts (Fig. 44/1) is lb ft Changing the rear wheels 1. Jack up the scrubber-drier n the left r right side: The cntact pints fr the jack (lifting pwer: 2.0 t) are n the frame in frnt f the rear wheels. 2. Remve the wheel nuts (Fig. 44/1). 3. Pull ff the wheel (Fig. 44/2). 4. Fit a wheel (Fig. 44/2). 5. Screw n and tighten the wheel nuts (Fig. 44/1) Changing the frnt wheel The prcedure t change the frnt wheel is analg t changing the rear wheels: 1. Apply the jack at the frnt centered t the vehicle's frnt frame and jack up the scrubber-drier. 2. Unscrew the wheel nuts. 3. Remve the wheel. 4. Install the wheel in place. 5. Screw n and tighten the wheel nuts. 111

112 Maintenance and Service 5.11 Electrical installatin Red cntrl lamps Refer t Sectin Errr cdes Refer t Sectins and Fuses The fuses are lcated in the electrnic system underneath the seat cnsle. Take hld f the seat cnsle by the handle and pivt it up. Always discnnect the battery plug befre starting any wrk n the electrical installatins. All the strke elements, all brush mtrs fr the scrubber-drier and all mtrs fr the side brushes and cylindrical brush f the presweep/vacuum unit are equipped with safety fuses and electrnic fuses. Safety fuses are installed in: the main fuse (200A high current fuse (F50)) the DC-DC cnverter (10A plug-in fuse (A8)) When these fuses blw, the vehicle is ut f peratin. This is nt indicated by an alarm signal n the perating panel! the cntrl unit (2A plug-in fuse (A1)) When these fuses blw, the vehicle is ut f peratin. This is nt indicated by an alarm signal n the perating panel! the suctin turbines (35A high current fuse) the water pump and relief valve fr the water supply (10A plug-in fuse) the drive mtr (160A current limiter in the drive cntrl) the extractr fan f the presweep/vacuum unit (20A plug-in fuse) the agitating mtr fr the presweep/vacuum unit (20A plug-in fuse) and the wrking lights and flashing beacn, autmatic filling device, key switch and hrn (10A plug-in fuse (F51)) When these fuses blw, the vehicle is ut f peratin. This is nt indicated by an alarm signal n the perating panel! Drive cntrl relay The drive cntrl is lcated in the left - hand part f the driver's cab underneath the ft plate. Always discnnect the battery plug befre starting any wrk n the electrical installatins. 1. Lsen the screws in the ft plate and remve the ft plate. 2. Relay K3 (main cntactr) is munted upstream frm the drive cntrl. 3. Replace a defect relay with a new ne. 4. Replace the ft plate and fix by means f the screws. 112

113 Maintenance and Service 5.12 Cleaning the vehicle 1. Clean the vehicle n a weekly basis, refer t Sectin Park the vehicle in an apprpriate washing area. Observe the applicable laws and lcal regulatins when dispsing f water cntaining cleaning agents and dirt! 3. Switch the vehicle ff and remve the key. 4. The vehicle may nly be cleaned using a water hse (perating pressure apprx t psi) and nly frm tp t bttm. It is nt permitted t clean the vehicle with a pressure washer r steam blaster. 5. D nt aim the jet f water directly at penings, slits, electrnic cmpnents, perating panels r seals. 6. It is nt permitted t use aggressive and crrsive cleaning agents. 7. Allw the vehicle t dry after cleaning. It is preferable t allw the vehicle t dry ver a lnger perid f time, e.g. the weekend. 113

114 Maintenance and Service 5.13 Transprt and twing Lading Observe the perating infrmatin n transprtatin! Check the lad bearing capacity f the lading platfrm prir t lading. Dead weight f the scrubber-drier withut battery, withut ptins and withut driver: 2061 lbs Ttal weight f the scrubber-drier with battery and full fresh water tank, withut driver: 3549 lbs When lading nt a truck r smething similar by means f a lading ramp, the ramp angle must nt exceed 15%. The climbing capacities stipulated in this manual can and may nly be achieved with the battery specified in the Sectin Technical Data. 1 2 Fig

115 Maintenance and Service Squeegee, brush head and side brush and cylindrical brush f the pre-sweep/vacuum unit must be raised. If the side brush cllisin prtectin ptin is assembled, it must be disassembled. Transprt When driving the vehicle (transprt mde) t the site f use, the squeegee, scrubbing unit and side brushes and cylindrical brush n the pre-sweep/vacuum unit must be raised. When the vehicle is t be transprted n anther vehicle r trailer, it must be secured against rlling away. Lash the vehicle dwn securely. The vehicle is prvided with attachment pints (lashing eyes) n the left and right-hand side t d this: at the rear f the frame and n the sides at the height f the entry area (Fig. 45/1+2). Twing the vehicle If it shuld becme necessary t tw the scrubber-drier, nly d it n level grund and at a maximum twing speed f 2.5 mph. The tw rpe must be attached at the frnt lashing pints. 115

116

117

118

119

120 Excellence Meets Clean Rev * 07/13 PwerBss Inc. 175 Andersn Street Aberdeen, NC U.S.A. Telephne: (910) Fax: (910)

Operation & Maintenance Manual For Commercial Use Only

Operation & Maintenance Manual For Commercial Use Only Operatin & Maintenance Manual Fr Cmmercial Use Only SWB 26/8 Battery Sweeper 2 Table f cntent 1 Safety infrmatin... 4 1.1 Safety and Warning Symbls... 4 1.2 General infrmatin... 4 1.3 Operating infrmatin...

More information

Instruction Manual. Kleensweep KS 32 R ( )

Instruction Manual. Kleensweep KS 32 R ( ) Instructin Manual Kleensweep KS 32 R (6400.40) Intrductin Preface Dear Custmer, We are certain that the excellent qualities f the vehicle will justify the faith yu have shwn in us thrugh yur purchase.

More information

Instruction manual. Hako Hamster 500 E ( )

Instruction manual. Hako Hamster 500 E ( ) Instructin manual Hak Hamster 500 E (6258.20) Intrductin PrefaceIntrductin Dear custmer, We hpe that the excellent qualities f the machine justify the faith yu have shwn in us by purchasing the prduct.

More information

Instruction Manual. Scrubmaster B30 / B30 CL (7715)

Instruction Manual. Scrubmaster B30 / B30 CL (7715) Instructin Manual Scrubmaster B30 / B30 CL (7715) Intrductin Preface Dear custmer, It is ur desire that the gd characteristics f the Scrubmaster B30 shuld justify the cnfidence yu demnstrated by making

More information

Safe Handling of High Voltage Electrical components in Electrical End of Life Vehicles

Safe Handling of High Voltage Electrical components in Electrical End of Life Vehicles Safe Handling f High Vltage Electrical cmpnents in Electrical End f Life Vehicles The fllwing infrmatin is extracted frm the dcument Safe Handling f High Vltage Electrical cmpnents in Electrical End f

More information

User Manual. Phoenix 24

User Manual. Phoenix 24 User Manual Phenix 24 Intrductin PrefaceIntrductin Dear custmer, It is ur desire that the gd characteristics f the Phenix 24 shuld justify the cnfidence yu demnstrated by making this purchase. Prir t the

More information

Valid as of: August Minuteman International Inc. 14N845 U.S. Route 20 Pingree Grove, Illinois U.S.A.

Valid as of: August Minuteman International Inc. 14N845 U.S. Route 20 Pingree Grove, Illinois U.S.A. User Manual H26 Intrductin PrefaceIntrductin Dear custmer, It is ur desire that the gd characteristics f the H26 shuld justify the cnfidence yu demnstrated by making this purchase. Prir t the first use,

More information

User Manual. E Ride 26 SPORT UMS Rev A 09/16

User Manual. E Ride 26 SPORT UMS Rev A 09/16 User Manual E Ride 26 SPORT 988726UMS Rev A 09/16 Intrductin Preface Dear custmer, Thank yu fr purchasing the Minuteman E Ride 26 SPORT. The utstanding peratinal characteristics f the E Ride 26 SPORT shuld

More information

ABTQ-103 rev 01 Last review:

ABTQ-103 rev 01 Last review: INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH PCS Cntrl Statin Purpse f Instructins Wrking in hazardus areas, the safety f persnnel and plant depends n cmplying with all relevant safety

More information

Instruction Manual. Sweepmaster P1500 RH ( ) Sweepmaster D1500 RH ( )

Instruction Manual. Sweepmaster P1500 RH ( ) Sweepmaster D1500 RH ( ) Instructin Manual Sweepmaster P1500 RH (6464.10) Sweepmaster D1500 RH (6464.30) Intrductin PrefaceIntrductin Dear Custmer, We are certain that the excellent qualities f the vehicle will justify the faith

More information

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.

More information

Model: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS

Model: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS 120 Mdel: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE INTRODUCTION This Wired Wall Timer system was

More information

Instruction Manual. Hako-Citymaster 1250 ( /.22/.31/.32)

Instruction Manual. Hako-Citymaster 1250 ( /.22/.31/.32) Instructin Manual Hak-Citymaster 1250 (1433.21/.22/.31/.32) Intrductin PrefaceIntrductin Dear Custmer, We are certain that the excellent qualities f the Hak-Citymaster 1250 will justify the faith yu have

More information

Effective Date: 10-January Table of Contents

Effective Date: 10-January Table of Contents Versin: 3 Page: 1 f 7 Table f Cntents 1.0 Intrductin... 2 1.1 Purpse... 2 1.2 Scpe... 2 1.3 Definitins... 2 1.4 Training Requirements... 3 2.0 General Requirements... 3 3.0 Inspectin... 3 4.0 Testing...

More information

OWNER S MANUAL. DCR-205-XX-DC Powered Drum Rotators

OWNER S MANUAL. DCR-205-XX-DC Powered Drum Rotators VESTIL MANUFACTURING CORP. 2999 N. Wayne St., Angla, IN 46703 Ph: 260-665-7586 Fax: 260-665-1339 E-mail: sales@vestil.cm Website: www.vestil.cm 0317 DCR-205-DC, MANUAL DCR-205-XX-DC Pwered Drum Rtatrs

More information

Safety Management System. Initial Revision Date: Version Revision No. 02 DRIVING SAFETY

Safety Management System. Initial Revision Date: Version Revision No. 02 DRIVING SAFETY Dc N: DRIVING Issue Date JAN 1995 Revisin Versin Revisin N. 02 Next Revisin Preparatin: Safety Mgr Authrity: President Issuing Dept: Safety Page: Page 1 f 5 Purpse This prgram is written t be in cmpliance

More information

RICHARD L. OREAIR & CO. Safety Management System

RICHARD L. OREAIR & CO. Safety Management System SAFETY Dc N: Revisin Date: Revisin N. 2 Initial Versin Preparatin: Safety Mgr Authrity: President Issuing Dept: Safety Page: Page 1 f 5 Purpse This prgram is written t be in cmpliance with lcal regulatry

More information

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.

More information

GLOBAL LIFT CORP. Owner s Manual. Rotational Series R-375

GLOBAL LIFT CORP. Owner s Manual. Rotational Series R-375 GLOBAL LIFT CORP Owner s Manual Rtatinal Series R-375 684 N Prt Crescent Rd Suite C Bad Axe, MI 48413 Tll Free: 866-712-0606 Fax: 989-269-5902 www.glballiftcrp.cm Page 1 ROTATIONAL SERIES POOL LIFTS R-375

More information

EnergyBar 6. Setup Guide

EnergyBar 6. Setup Guide EnergyBar 6 Setup Guide WELCOME Cngratulatins n yur purchase f the Apex EnergyBar 6! The EnergyBar 6 allws the Apex system t cntrl up t six 230 vlt items such as lights, pumps, fans, heaters, chillers

More information

Car Refrigerator PFN-C-WEA-25/35/45/55

Car Refrigerator PFN-C-WEA-25/35/45/55 Car Refrigeratr PFN-C-WEA-25/35/45/55 Accessries available separately:- Prtective Transit Bag AC0V -240Vt DC 2 V Pwer Adaptr Please read this manual carefully befre using yur unit. Sectin Page Key Prduct

More information

GLOBAL LIFT CORP. Owner s Manual. Superior Series Proformance Series S-350 / P-375

GLOBAL LIFT CORP. Owner s Manual. Superior Series Proformance Series S-350 / P-375 GLOBAL LIFT CORP Owner s Manual Superir Series Prfrmance Series S-350 / P-375 684 N Prt Crescent Rd Suite C Bad Axe, MI 48413 Tll Free: 866-712-0606 Fax: 989-269-5902 www.glballiftcrp.cm Page 1 SUPERIOR

More information

HIGH POWER RGB LED SERIES. The HB Series Advantage! Architectural Illumination Systems!

HIGH POWER RGB LED SERIES. The HB Series Advantage! Architectural Illumination Systems! The HB Series Advantage SGS listed cnfirming t UL Standard 2108 & 8750 Certified t CSA Standard C22.2 N.9 LED Life f 50K+ hurs, under nrmal perating cnditins Lw wattage, lw heat, lw vltage (12DVC & 24VDC

More information

Introduction Specifications Structure & Performance Assembly Folding Operation Care & Maintenance...

Introduction Specifications Structure & Performance Assembly Folding Operation Care & Maintenance... n Intrductin... 3 Specificatins... 4 Structure & Perfrmance... 5 Assembly... 6 Flding... 7 Operatin... 8-12 Care & Maintenance... 13-15 2 P a g e Read and fllw all instructins, warnings, and ntes in this

More information

Installation Guide Contigo 6100

Installation Guide Contigo 6100 Installatin Guide Cmmercial Vehicle Prductivity and Security The is a high-perfrmance beacn designed fr cmmercial prductivity and security. It is ideally suited t installatins in delivery and service fleets

More information

Trouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves)

Trouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) Truble Shting Guide fr AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) AFVK-SP, AFVK-SP-H/L, AFVK-SP-MH/L AFVK-SP Series Valve Kit Truble Shting Guide (AF-4000 Series) TABLE OF CONTENTS General Infrmatin

More information

User Manual. X Ride 28 Riding Extractor

User Manual. X Ride 28 Riding Extractor User Manual X Ride 28 Riding Extractr Intrductin Preface Dear custmer, Thank yu fr purchasing the Minuteman X Ride 28. The utstanding peratinal characteristics f the X Ride 28 shuld justify the cnfidence

More information

Safe Work Procedure Self-Loading Logging Truck

Safe Work Procedure Self-Loading Logging Truck Safe Wrk Prcedure Self-Lading Lgging Truck PERSONAL PROTECTIVE EQUIPMENT: Adequate ftwear with gd tractin sles Hi-vis hardhat when ut f cab Hi-vis vest when ut f cab Hearing prtectin when driving PROCEDURES:

More information

Operator s Manual with Maintenance Information. Second Edition Fourth Printing Part No

Operator s Manual with Maintenance Information. Second Edition Fourth Printing Part No Operatr s Manual with Maintenance Infrmatin Secnd Editin Furth Printing Part N. 48643 Operatr s Manual Secnd Editin Furth Printing Imprtant Read, understand and bey these safety rules and perating instructins

More information

E+ Battery Care Guide

E+ Battery Care Guide Electric Mtin Systems, LLC 45150 Business Curt, Suite 300 Dulles, VA 20166 USA E+ Battery Care Guide Welcme! Yur E+ Hub Battery Pack is a pwerful, sphisticated, and imprtant part f yur E+ Electric Bicycle.

More information

Installation instructions: 13 Pin Electrical system for towing hitch

Installation instructions: 13 Pin Electrical system for towing hitch General data Part number Westfalia Vehicle Manufacturer Vehicle 321 538 300 153 ZGB 1T0 055 204 Vlkswagen Turan MY 2003> 321 538 391 105-005 - 33/07 Imprtant ntes Read the installatin manual prir t starting

More information

LED Driver Feedback Signs

LED Driver Feedback Signs LED Driver Feedback Signs Installatin Instructins (029-04151-0000) Nvember 2012 Slar Kit 35AH / 55W 70AH / 55W 70AH / 85W M75-SOLAR-000S M75-SLR70-000S M75-SOLAR-000C E. 5676 Seltice Way Pst Falls, Idah

More information

General Faucet Installation Instructions

General Faucet Installation Instructions General Faucet Installatin Instructins Step 1: Psitin the Faucet Begin installing yur faucet by placing the gasket and faucet in psitin n the sink. (Diagram A) Frm under the sink, thread the plastic munting

More information

Safety Rules. Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless:

Safety Rules. Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless: Third Editin First Printing Operatr's Manual Safety Rules Danger Failure t bey the instructins and safety rules in this manual will result in death r serius injury. D Nt Operate Unless: Yu learn and practice

More information

CS369-R51I Thank you very much for purchasing our air conditioner.

CS369-R51I Thank you very much for purchasing our air conditioner. OWNER'S MANUAL CONDITIONER REMOTE CONTROLLER ILLUSTRATION The design and specificatins are subject t change withut prir ntice fr prduct imprvement. Cnsult with the sales agency r manufacturer fr details.

More information

Operator s Manual with Maintenance Information. First Edition Eleventh Printing Part No

Operator s Manual with Maintenance Information. First Edition Eleventh Printing Part No Operatr s Manual with Maintenance Infrmatin First Editin Eleventh Printing Part N. 39527 Operatr's Manual First Editin Eleventh Printing Imprtant Read, understand and bey these safety rules and perating

More information

Tools Required. Installation. Step 1. Headlight lense removal (Driver's side shown, Passenger side similar)

Tools Required. Installation. Step 1. Headlight lense removal (Driver's side shown, Passenger side similar) Tls Required Phillips Screw Driver (crner lamps) Flat Head Screw Driver (ptinal fr headlight cver) Pliers (handy t have) Electrical Tape Sturdy Cpper Wire (t use as a wire fish) 10mm Scket r Wrench (grund

More information

GLOBAL LIFT CORP Owner s Manual

GLOBAL LIFT CORP Owner s Manual GLOBAL LIFT CORP Owner s Manual 39 N. Caseville Rad PO Bx 559 Pigen, MI 48755 Tll Free: 866-712-0606 Fax: 989-453-3050 www.glballiftcrp.cm Page 1 COMMERCIAL SERIES POOL LIFTS C-350 ~ C-450 ~ C-550 TABLE

More information

DriveCam Unit Installation Instructions

DriveCam Unit Installation Instructions DriveCam Unit Installatin Instructins Installatin f the DriveCam Unit is nt cmplicated, thugh care must be taken t avid specific prblems. Sme vehicles require additinal cnsideratin t determine the ptimum

More information

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-30 TRACK TORCH/BURNER MACHINE. by BLUEROCK Tools

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-30 TRACK TORCH/BURNER MACHINE. by BLUEROCK Tools Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-30 TRACK TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.

More information

Machine Safeguarding

Machine Safeguarding Machine Safeguarding General This dcument will prvide yu a high-level verview n sme best practices pertaining t machine guarding and sample types f guards fund in manufacturing settings. The Main Causes

More information

FIRST: Top battery (closest to the arm) SECOND: Middle battery. LAST: Top battery (furthest from arm)

FIRST: Top battery (closest to the arm) SECOND: Middle battery. LAST: Top battery (furthest from arm) Hw t Install the Batteries Hw t Hld the Lamp: The InteliEnergy Lamp selectin switches utilize the same technlgy as cell phnes: Capacitive Tuch. This assures the ultimate in lngevity because there are n

More information

Tips & Technology For Bosch business partners

Tips & Technology For Bosch business partners Tips & Technlgy Fr Bsch business partners Current tpics fr successful wrkshps N. 35/2011 Gasline injectin Invented fr life Lambda sensr Knw-hw frm the market leader Bsch, innvative cmpany and wrld's largest

More information

Instruction manual. Sweepmaster B1200 RH ( )

Instruction manual. Sweepmaster B1200 RH ( ) Instructin manual Sweepmaster B1200 RH (6300.30) Intrductin PrefaceIntrductin Dear custmer, It is ur desire that the gd characteristics f the Sweepmaster B1200 RH shuld justify the cnfidence yu demnstrated

More information

INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS

INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS Parts UHO (Ultra High Output) Pump 3 Qt Reservir 10 ft High Pressure Tubing 3ft Wire Lm 18 1/8

More information

Installation Guide Contigo 6150 & 6151

Installation Guide Contigo 6150 & 6151 Installatin Guide Cntig 6150 & 6151 Cmmercial Vehicle Prductivity and Security The Cntig 6150 & 6151* (cllectively knwn as the Cntig 615X) are highperfrmance beacns designed fr cmmercial prductivity and

More information

NEXT UPS Systems MANTIS II Tower 750/1000/1500 Installation and user manual English

NEXT UPS Systems MANTIS II Tower 750/1000/1500 Installation and user manual English NEXT UPS Systems MANTIS II Twer 750/1000/1500 Installatin and user manual English CONTENT IMPORTANT SAFETY INSTRUCTIONS... 1 1. Intrductin... 4 2. Descriptin f Features... 4 3. Package Cntents... 4 4.

More information

BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE

BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE 1. INTRODUCTION... 3 2. PRECAUTIONS... 3 3. INSPECTION UPON RECEIPT OF GOODS... 4 3.1 GENERAL... 4 3.2 VISIBLE DAMAGE... 4 3.3 CONCEALED DAMAGE...

More information

EDBRO RIGID INCLINOMETER

EDBRO RIGID INCLINOMETER EDBRO RIGID INCLINOMETER RINC01 Installatin & Operating Instructins E5542 rev 1 (June 2010) Edbr PLC Nelsn Street, Bltn BL3 2JJ UK Tel: +44 (0) 120 4528888 Fax: +44 (0) 120 4531957 E-mail: pstmaster@edbr.cm

More information

EP12M248 7 Stage Automatic Smart Battery Charger, Desulphuration& Maintainer 12V, 2 / 4 / 8A FOR AGM, GEL AND WET BATTERIES USER MANUAL

EP12M248 7 Stage Automatic Smart Battery Charger, Desulphuration& Maintainer 12V, 2 / 4 / 8A FOR AGM, GEL AND WET BATTERIES USER MANUAL EP12M248 7 Stage Autmatic Smart Battery Charger, Desulphuratin& Maintainer 12V, 2 / 4 / 8A FOR AGM, GEL AND WET BATTERIES USER MANUAL THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS 1

More information

PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D),

PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D), SERVICE REPLACES: Please discard ATV 07-02 dated 4/5/07 MODEL: PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D), KFX700 (KSV700-A/B/C),

More information

PV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual

PV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual PV-70 Remtely Operated Crygenic Glbe Valve Installatin, Operatin, and NOTIC: Printed cpies are uncntrlled. Page 1 f 12 TABL OF CONTNTS 1. INSTALLATION... 2 2. OPRATION... 4 3. MAINTNANC... 4 4. PRSSUR

More information

INSTALLATION & USER S GUIDE

INSTALLATION & USER S GUIDE REKLUSE MOTOR SPORTS The Rekluse EXP Clutch OVERVIEW INSTALLATION & USER S GUIDE Dc ID: 191-6000 Manual Revisin: 050514 This kit will replace sme f the OEM frictins and drive plates with the EXP disk.

More information

SERVICE FACTORY DIRECTED MODIFICATION MC IMMEDIATE INSPECTION REPAIR ONLY AS REQUIRED ENGINE PULLEY WEAR

SERVICE FACTORY DIRECTED MODIFICATION MC IMMEDIATE INSPECTION REPAIR ONLY AS REQUIRED ENGINE PULLEY WEAR SERVICE REPLACES: Please discard MC 06-07 dated June 27, 2006 MODEL: 2004-2005 VULCAN 2000 (VN2000-A1/L-A2/L) MC 06-07 Date: July 28, 2006 First Issued: June 27, 2006 Page 1 f 7 TITLE: ENGINE PULLEY WEAR

More information

PSS INSTALLATION INSTRUCTIONS

PSS INSTALLATION INSTRUCTIONS PSS INSTALLATION INSTRUCTIONS Imprtant - Read Befre Starting! Befre starting yur installatin carefully read the fllwing warnings and instructins. Failure t prperly fllw the warnings and instructins culd

More information

TECHNICAL SPECIFICATION. SPC-4T Stirling Process Cryogenerator

TECHNICAL SPECIFICATION. SPC-4T Stirling Process Cryogenerator TECHNICAL SPECIFICATION SPC-4T Stirling Prcess Crygeneratr Reference 80 8044_00 Issue Date April 20, 2016 Stirling Crygenics is a registered trade name f DH Industries BV Fr mre infrmatin n the Stirling

More information

INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL

INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL Parts UHO Pump (Ultra High Output) 3 Qt Reservir 10 ft High Pressure Tubing 3 ft Black Wire

More information

Design Standard - Fume Hoods & Fume Hood Exhausts

Design Standard - Fume Hoods & Fume Hood Exhausts 1.0 Intrductin Design Standard - Fume Hds & Fume Hd Exhausts The fume hd is the primary cntrl device in mst labratries fr prtecting emplyees and students frm expsure t hazardus chemicals. It is als an

More information

NON-ROAD DIESEL EMISSIONS FUEL EFFICIENCY PLAN GUIDELINE VANCOUVER FRASER PORT AUTHORITY

NON-ROAD DIESEL EMISSIONS FUEL EFFICIENCY PLAN GUIDELINE VANCOUVER FRASER PORT AUTHORITY NON-ROAD DIESEL EMISSIONS FUEL EFFICIENCY PLAN GUIDELINE VANCOUVER FRASER PORT AUTHORITY January 31, 2017 VANCOUVER FRASER PORT AUTHORITY Nn-Rad Diesel Emissins Fuel Efficiency Plan Guideline Table f Cntents

More information

USER`s Manual. Swivelling semi-automatic press. Swivelling manual press TECHNICAL DATA. - works without compressor

USER`s Manual. Swivelling semi-automatic press. Swivelling manual press TECHNICAL DATA. - works without compressor USER`s Manual Swivelling semi-autmatic press Swivelling manual press TECHNICAL DATA - wrks withut cmpressr - pens autmatically ( nly Swing S ) - swivels autmatically aside ( nly Swing S ) Dimensins in

More information

MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER

MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER CT3070.0_01 EN June 2016 Patent applicatin n. 202015000064159 Super cmpact Retains all impurities Fights crrsin Increases the lifespan f the biler Maintains

More information

FUELS SAFETY BRANCH INFORMATION BULLETIN July 1994

FUELS SAFETY BRANCH INFORMATION BULLETIN July 1994 FUELS SAFETY BRANCH INFORMATION BULLETIN July 1994 Guidelines fr Maintenance and Inspectin Prgrams fr Natural Gas and Prpane Appliances and their Fuel Features In Schls The Ontari Gas Utilizatin Cde states

More information

Gearbox Installation Manual

Gearbox Installation Manual Gearbx Installatin Manual Rtrk Gears HOB/MPR & HOS/MPR ranges (Electrnic cpy available n www.rtrk.cm)! This manual cntains imprtant safety infrmatin. Please ensure it is thrughly read and understd befre

More information

EDBRO TRAILER INCLINOMETER

EDBRO TRAILER INCLINOMETER EDBRO TRAILER INCLINOMETER TINC01 (12V AND 24V VERSIONS) Installatin & Operating Instructins E5541 rev 5 (Sept 2015) Edbr PLC Nelsn Street, Bltn BL3 2JJ UK Tel: +44 (0) 120 4528888 Fax: +44 (0) 120 4531957

More information

Parts Checklist: ZJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Grand Cherokee ZJ

Parts Checklist: ZJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Grand Cherokee ZJ ZJ Frnt 3-Link Lng Arm Upgrade Installatin Instructins 93-98 Jeep Grand Cherkee ZJ Parts Checklist: *BOX 1* Instructins Invice Lg decal 10001 (Qty: 1) Rck-Link decal 13287 (2) Irnrckffrad.cm decal (1)

More information

Parts Checklist: XJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Cherokee XJ

Parts Checklist: XJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Cherokee XJ XJ Frnt 3-Link Lng Arm Upgrade Installatin Instructins 84-01 Jeep Cherkee XJ Parts Checklist: *BOX 1* Instructins Invice Lg decal 10001 (1) Rck-Link decal 13287 (2) Irnrckffrad.cm decal (1) Subframe center

More information

INSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS

INSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS Parts UHO Pump (Special High Output) 3 Qt Reservir 10 Ft High Pressure Tubing 3 Ft Wire Lm 18 1/8 Silicne

More information

CS ENERGY PROCEDURE FOR LADDERS CS-OHS-52. Key Changes Prepared By Checked By Approved By Date

CS ENERGY PROCEDURE FOR LADDERS CS-OHS-52. Key Changes Prepared By Checked By Approved By Date CS ENERGY PROCEDURE FOR LADDERS CS-OHS-52 Respnsible Officer: Respnsible Executive: Grup Manager Health and Safety Executive General Manager Crprate DOCUMENT HISTORY Key Changes Prepared By Checked By

More information

XJ 4-Link Rear Long Arm Instructions

XJ 4-Link Rear Long Arm Instructions Parts Checklist: Instructins Irn Rck Off Rad Decal - (2) Rck-Link Decal 13287 - (2) irnrckffrad.cm Decal - (1) Crssmember - 991162 - (1) Shck crssmember - 91173 - (1) Shck crssmember spacer - 91178 - (2)

More information

4 Wheel Electric Forklift Trucks B40X / B45X / B50X-5

4 Wheel Electric Forklift Trucks B40X / B45X / B50X-5 R 4 Wheel Electric Frklift Trucks B40X / B45X / B50X-5 8,000lb t 10,000lb Capacity B40X / B45X / B50X-5 8,000lb t 10,000lb Capacity 80 VOLT Slid Sft Rider Tire PSC0708A3v2 AUTHORIZED DEALER Dsan Industrial

More information

VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES. Follow these procedures to keep your Vyleater running smoothly.

VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES. Follow these procedures to keep your Vyleater running smoothly. VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES! WARNING! Failure t fllw these prcedures may cause an verlad cnditin that culd result in the Vyleater becming severely damaged. Fllw these

More information

Pre-Planning Delivery Guide

Pre-Planning Delivery Guide Pre-Planning Delivery Guide Need Assistance? Call 1-888-768-6772 Pre-Delivery Spa Delivery Preparatin Yur spa delivery will arrive CURBSIDE at the specified delivery address yu prvided at the time f yur

More information

MG1 TM COMPACT MAGNETIC SYSTEM FILTER

MG1 TM COMPACT MAGNETIC SYSTEM FILTER MG1 TM COMPACT MAGNETIC SYSTEM FILTER CT3070.0_00 EN Nvember 2015 Patent applicatin n. 202015000064159 Super cmpact Retains all impurities Fights crrsin Increases the lifespan f the biler Maintains ptimum

More information

GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS SECURITY SYSTEM KIT CONTENTS SHOCK SENSOR F-D15 WINDOW DECAL (QTY 2) F-D16

GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS SECURITY SYSTEM KIT CONTENTS SHOCK SENSOR F-D15 WINDOW DECAL (QTY 2) F-D16 GENUINE ACCESSRIES INSTALLATIN INSTRUCTINS PART NUMBER: 0000-8F-N03 NTE: NT CMPATIBLE WITH REMTE START SYSTEM, PART# 0000-8F-N02 SECURITY SYSTEM KIT CNTENTS APPLICABLE MDELS: 2007>MAZDA CX-9 WITHUT ADVANCED

More information

ENVIRONMENTAL HEALTH Prepackaged Food Booths with Open Sampling or Beverage Dispensing at Community Events

ENVIRONMENTAL HEALTH Prepackaged Food Booths with Open Sampling or Beverage Dispensing at Community Events STE 120 HE ALTH CARE AGENCY/PUBLIC HE ALTH ENVIRONMENTAL HEALTH Prepackaged Fd Bths with Open Sampling r Beverage Dispensing at Cmmunity Events WHY THIS INFORMATION IS IMPORTANT A temprary fd bth, r hw

More information

How to Sweat (Solder) Copper Pipe By See Jane DrillTM Copyright 2013, All Rights Reserved

How to Sweat (Solder) Copper Pipe By See Jane DrillTM Copyright 2013, All Rights Reserved Hw t Sweat (Slder) Cpper Pipe By See Jane DrillTM Cpyright 2013, All Rights Reserved Objective T learn hw t attach pieces f cpper pipe by sweating r sldering the metal tgether. This is a helpful skill

More information

72 Mustang Mach 1 tachometer cluster and gauge conversion

72 Mustang Mach 1 tachometer cluster and gauge conversion 72 Mustang Mach 1 tachmeter cluster and gauge cnversin Dated: 02-17-2009 (drafted by a Chevy persn wrking n his first Frd -nt gd-) The fllwing infrmatin pertains t hw I went abut cnverting the standard

More information

Solvent Filter. What is a Solvent Trap, Solvent Recycler or Solvent Filter? Why use a solvent filter? Why is the HIT Solvent Filter better?

Solvent Filter. What is a Solvent Trap, Solvent Recycler or Solvent Filter? Why use a solvent filter? Why is the HIT Solvent Filter better? Slvent Filter What is a Slvent Trap, Slvent Recycler r Slvent Filter? It is a device attached t the end f a threaded barrel that cllects all f the slvent and debris as it is cleaned frm the barrel and

More information

Lithium Battery Shipping Overview

Lithium Battery Shipping Overview Lithium batteries are used in many electrnic devices such as cameras, cell phnes, laptp cmputers, medical equipment and pwer tls. When shipping r imprting lithium batteries, including thse cntained in

More information

Application of size, weight, and load limitations for vehicles -- Exceptions.

Application of size, weight, and load limitations for vehicles -- Exceptions. Utah Vehicle Cde 41-1a-102. Definitins. As used in this chapter: (10) "Cmmercial vehicle" means a mtr vehicle, trailer, r semitrailer used r maintained fr the transprtatin f persns r prperty that perates:

More information

Installation Instructions AQ-5100, AQ-5200 & AQ-5300 Under Counter Water Filter Single Stage (5100), Two Stage (5200) and Three Stage (5300) systems

Installation Instructions AQ-5100, AQ-5200 & AQ-5300 Under Counter Water Filter Single Stage (5100), Two Stage (5200) and Three Stage (5300) systems Live Healthy s ' p V iv Installatin Instructins AQ-5100, AQ-5200 & AQ-5300 Under Cunter Water Filter Single Stage (5100), Tw Stage (5200) and Three Stage (5300) systems Welcme t the Aquasana experience.

More information

WELCOME. WEB LOCATION Los Angeles, CA

WELCOME. WEB   LOCATION Los Angeles, CA WELCOME Thank yu fr chsing AC Infinity. We are cmmitted t prduct quality and friendly custmer service. If yu have any questins r suggestins, please dn t hesitate t cntact us. Visit www.acinfinity.cm and

More information

Iveco New Daily Crew Van. perfect combination between people and cargo

Iveco New Daily Crew Van. perfect combination between people and cargo Ivec New Daily Crew Van perfect cmbinatin between peple and carg Index Crew Van ultimate slutin fr wrk and leisure Sneks Crew Van Crew Van Cmfrt Accessries Prgram and Dimensins Specificatins and ptins

More information

03-06 TJ Long Arm Upgrade Instructions

03-06 TJ Long Arm Upgrade Instructions Parts List: Instructins Irn Rck Off Rad lg decal (2) Irnrckffrad.cm decal (1) Belly skid plate 85046 (1) Left lng arm frame munt 85121 (1) Right lng arm frame munt 85122 (1) Left LCA munt gusset plate

More information

ADVISORY: General Motors Upfitter Integration Bulletin #108d P a g e 1 May 18, 2016

ADVISORY: General Motors Upfitter Integration  Bulletin #108d P a g e 1 May 18, 2016 Subject: Aftermarket ALDL r DLC Interface Devices Causing Multiple Issues Mdels All Passenger Cars and Trucks Affected: Mdel Years: 2006 and beynd Date: February 4, 2013 Revisin Date: May 18, 2016 ADVISORY:

More information

Operator s Manual. with Maintenance Information. Seventh Second Printing Part No

Operator s Manual. with Maintenance Information. Seventh Second Printing Part No Operatr s Manual with Maintenance Infrmatin Secnd First Editin Editin Seventh Secnd Printing Part N. 43645 65176 Imprtant Read, understand and bey these safety rules and perating instructins befre perating

More information

Operator s Manual with Maintenance Information. First Edition Third Printing Part No

Operator s Manual with Maintenance Information. First Edition Third Printing Part No Operatr s Manual with Maintenance Infrmatin First Editin Third Printing Part N. 72146 Operatr's Manual First Editin Third Printing Imprtant Read, understand and bey these safety rules and perating instructins

More information

PRE-PLANNING & DELIVERY GUIDE

PRE-PLANNING & DELIVERY GUIDE TM PRE-PLANNING & DELIVERY GUIDE Need Assistance? Call 1-888-329-4847 PRE-DELIVERY Spa Delivery Preparatin Yur spa delivery will arrive CURBSIDE at the specified delivery address yu prvided at the time

More information

User s Manual TECHNICAL DATA

User s Manual TECHNICAL DATA User s Manual TECHNICAL DATA Dimensins...23x28x33cm Weight...13kg Vltage...... 230VAC Pwer...330W Fuse...... 6A Max. temperature...... 210 C Temperature range.....50-210 C Heating sleeve.....105 x 230

More information

Parts Checklist: WJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* (1) *BOX 2* (1) Jeep Grand Cherokee WJ

Parts Checklist: WJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* (1) *BOX 2* (1) Jeep Grand Cherokee WJ Parts Checklist: *BOX 1* 13319 (1) Instructins Lg decal 10001 (Qty: 1) Rck-Link Decal 13287 (2) Irnrckffrad.cm decal (1) Subframe center 92270 (1) Subframe left uter 92256 (1) Subframe right uter 92275

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessry Applicatin Publicatins N. All 24107 AIR CONDITIONER ELEMENT (DX) Issue Date DEC 2002 What s New INSTALLATION The A/C kit and instructins fr the 2003 Element are all new.

More information

Operator s Manual. with Maintenance Information. Second Edition Seventh Fourth Printing Part No

Operator s Manual. with Maintenance Information. Second Edition Seventh Fourth Printing Part No Operatr s Manual with Maintenance Infrmatin Secnd Editin Seventh Furth Printing Part N. 43645 82199 Operatr's Manual Secnd Editin Furth Printing Imprtant Read, understand and bey these safety rules and

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Observer Zning Bard ZONE0101ZP6 These instructins must be read and understd cmpletely befre attempting installatin Safety Labeling and Signal Wrds DANGER, WARNING, CAUTION, and

More information

Copyright 2015 Maxitrak ltd

Copyright 2015 Maxitrak ltd Cpyright 2015 Maxitrak ltd maxitrak.cm 1 CASE Driving and Maintenance. Sme tips n driving and lking after yur Maxitrak/Accucraft 1 Case tractin engine. Once yu have taken yur mdel frm the packaging it

More information

CAUTION: Do not install damaged parts!!!

CAUTION: Do not install damaged parts!!! Yur satisfactin is imprtant t us, please let us help! If yu have any questins r cncerns during the installatin, ur supprt representatives are available t assist yu. Please call: 1-877-769-3765 r Live Chat

More information

READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION!

READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION! www.fabtechmtrsprts.cm 4331 EUCALYPTUS AVE ~~ CHINO, CA 91710 PHONE 909-597-7800 ** FAX 909-597-7185 1994-2001 DODGE RAM 1500 & 2500 4 WHEEL DRIVE FTS3400-50 FRONT DUAL SHOCK SYSTEM PARTS LIST: 1 EA. FT3400-50-100P

More information

Advanced 3 Million Wireless USB Limousine Underbody Kit

Advanced 3 Million Wireless USB Limousine Underbody Kit Advanced 3 Millin Wireless USB Limusine Underbdy Kit Warning: Please check yur state and lcal laws befre installing this LED underbdy kit. Every state has different plicies and prcedures in place regarding

More information

Auxiliary Power Unit (APU) Owner s manual D

Auxiliary Power Unit (APU) Owner s manual D Auxiliary Pwer Unit (APU) Owner s manual 54-8293-D The Dynasys TM APU has been designed fr ease f peratin and maintenance. Review f this manual and the pre-trip inspectins will reduce any ver-the-rad perating

More information

;THI~~Sf\-FEJY _.:.. ;'..»...

;THI~~Sf\-FEJY _.:.. ;'..»... 45 -CHAPTER......... j...,.. 8 ~\..- ;THI~~Sf\-FEJY _.:.. ;'..».......,. np;,llf I~~yeantlfreez~in ah'penc8ntaiil~rr spllledq.l,1thefi()r ~~erifit:p1ightbe acc;~ss:lblle.i t children r ariimals.antifreezeis'txic

More information

Methanol Recovery Systems

Methanol Recovery Systems Methanl Recvery Systems Methanl Recvery fr bidiesel is an imprtant part f the entire bidiesel prcess and invlves the highest cst f peratin fr a bidiesel plant. Only abut half f the methanl used is actually

More information