Fuse Panels, Fuse Holders and Fuses

Size: px

Start display at page:

Download "Fuse Panels, Fuse Holders and Fuses"

Joseph Arnold
6 years ago
Views:

1 DC Power Systems for Business-Critical Continuity Fuse Panels, Fuse Holders and Fuses 23" (58.42cm) Fuse Panels Description of Panels E/W Fuse Positions and Accessories Fuse Type Fuse Table Panel Height Notes Wrap & Solder Load Term (4) 0-5 A 70 A 1-3/4" (4.45cm) 2, Ga Load Term* (20-20) 0-10 A Split Load (20 A Max Per Side) Load & Grd. Rtn. Term Blocks GMT B 3/4" (1.91cm) 5 Wire Wrap Load Term (50) 0-10 A (Accessory Grd. Bar ) GMT B 3-1/2" (8.89cm) 5 1/4" (.64cm) Stud Load Term (16) 0-60 A TPS C 7" (17.78cm) 3/4" (1.91cm) Stud ( A), 7/8" (2.23cm) Stud ( A) Load Term** (1) A TPL E 5-1/4" (13.34cm) (1) A E/W A 400 A Shunt TPL E 5-1/4" (13.34cm) (2) A TPL E 7" (17.78cm) (2) A E/W (2) 400 A Shunts TPL E 7" (17.78cm) (2) A A/F (2) Shunts & Ammeters TPL E 7" (17.78cm) 9, (4) A TPL E 10-1/2" (26.67cm) (1) A TPL E 5-1/4" (13.34cm) (1) A E/W A 600 A Shunt TPL E 5-1/4" (13.34cm) (2) A TPL E 7" (17.78cm) (2) A E/W (2) 600 A Shunt TPL E 7" (17.78cm) (2) A A/F (2) Shunts & Ammeters TPL E 7" (17.78cm) 9, (4) A TPL E 10-1/2" (26.67cm) (1) A Fuse Switch Unit TPL E 7" (17.78cm) (2) A Fuse Switch Unit TPL E 12-1/4" (31.12cm) (1) A Fuse Switch Unit A/F Ammeter and Shunt TPL E 7" (17.78cm) 9, 11 Lug Adpt. Load Term (1) 800-1,200 A KRPC F 5-1/4" (13.34cm) 12, (1) 800-1,200 A Fuse Switch Unit W/WO Shunt KRPC F 12-1/4" 12, 14 * Lugs not required ** See Table M 1

2 19" (48.26cm) Fuse Panels Description Fuse Type Fuse Table Panel Height Notes Wrap & Solder Load Term (4) 0-5 A 70 A 1-3/4" (4.45cm) 2, 8 Wire Wrap Load Term (40) 0-10 A (Accessory Grd. Bar ) GMT B 3-1/2" (8.89cm) (20-20) 0-10 A Split Load (Accessory Grd. Bar ) GMT B 3-1/2" (8.89cm) 5 Term Block #6 Screw Load Term (10-10) 0-10 A Split Load GMT B 1-3/4" (4.45cm) 5, Ga Load Term* (20-20) 0-10 A Split Load (20 A Max Per Side) Load & Grd. Rtn. Term Blocks GMT B 1-3/4" (4.45cm) 5 1/4" (.63cm) Stud Load Term (12) 0-60 A TPS C 7" (17.78cm) Lug Adpt. Load Term (1) A TPL E 5-1/4" (13.34cm) (1) A TPL E 5-1/4" (13.34cm) 15 Rear Fuse Cabinet Assembly ( ) 2

3 Rear amp Fuse Panel Rear amp Fuse and Switch Distribution Panel 3

4 Side Rear Battery Load Alarm 0 5 amp Twin Fuse Block (70 Type) Side Alarm Battery Load 0 10 amp Fuse Block (GMT type) Side amp Fuse Block (bolt-in type) Side TPS Fuseholders 4

5 A) 70 Type Fuse B) GMT Type Fuse C) TPS / TLS Type Table A: 70 Type 70 Type Designation Pins amp Capacity Color Yellow Violet * Violet/White Red Brown White Orange Blue Green Table B: GMT Type amp Capacity Color Violet Red Brown White Orange Blue Brown/White Green Red/White Dummy Safety Cover Table C: TPS / TLS Type amp Capacity TPS Type Bussmann GMT-A ALM Fuse for Use with TPS Holders Safety Cover

6 D) TPN Type 1 30 amp D) TPN Type amp Table D: TPN Type amp Capacity Top End E) TPL Type Table E: TPL Type amp Capacity F) KRP-C Type Table F: KRP-C Type amp Capacity

7 Table G: Ammeters & Shunts amp Ammeter Shunt Part Capacity Number Table H: Ammeters & Shunts amp Ammeter Shunt Part Capacity Number Table I: Shunts amp Capacity Shunt Table J: Bus Bars Number of Fuse Blocks Connected Table K: Lugs and Adapters Description Adapter E/W (1) 2-4/0 saddle lug (1) 0-500MCM saddle lug (1) MCM saddle lug Adapter E/W (2) 1/0-500MCM saddle lugs Adapter for crimp lugs 3/8" (.95cm) hardware (1" [2.54cm] C-C) or 1/2" (1.27cm) hardware (1-3/4" [4.45cm] C-C)

8 Application Notes 1. Unless otherwise specified (Notes 2, 7 & 12), an alarm LED card part number , for use with power board equipment with a fuse alarm circuit, is furnished as standard. When no power board alarm circuit is available and an alarm LED and relay is required, specify panel e/w optional alarm LED and relay card part number Specify voltage and polarity. 2. This assembly is equipped with an alarm LED and relay card part number If not required, it may be replaced with a alarm LED card. Specify voltage and polarity. 3. These fuse panel assemblies can be used for ±12, 24, 48 OR 130 volt applications unless otherwise specified (Note 5). 4. Apparatus mounting blanks are provided for all unequipped positions. 5. To be used up to 60 Volt DC only. 6. Contact Emerson Network Power for additional information concerning any specific fuse panel. Specify part number and request assembly drawing. 7. This assembly has an alarm relay and lamp arranged for ± 24 or 48 volt only. Specify voltage and polarity. 8. When a special arrangement is required, specify additional quantity of twin fuse block(s), part number and busbar(s) required per Table J. 9. Unless otherwise specified, output lugs and lug adapters are not provided, order from Table K and lug tables in this catalog per job requirements. 10. Ammeters and shunts are not furnished with assembly and must be ordered from Table J per job requirements. 11. Ammeters and shunts are not furnished with assembly and must be ordered from Table I per job requirements. 12. This assembly is equipped with a fuse alarm resistor tapped for 250, 500 or 2,500 ohms for connection to a fuse alarm relay circuit. 13. Lug adapters are not part of this assembly, order (1) or (2) part number lug adapter (A/F 3/8" (.95cm) HDW 1" [2.54cm] C-C or 1/2" [1.27cm] HDW 1-3/4" [4.45cm] C-C ). Order (1) part number busbar for fuse to discharge bus when required. 14. Assembly is furnished with a lug adapter A/F (3)sets of mounting holes 3/8" (.95cm) HDW 1" (2.54cm) C-C. When a shunt is required, order assembly equipped with a shunt mounting block part number and shunt from Table I as required. 15. Assembly is furnished with (2) lug adapters A/F (2) sets of mounting holes 3/8" (.95cm) HDW 1" (2.54cm) C-C and (1) set of mounting holes 1/2" (1.27cm) HDW 1-3/4" (4.45cm) C-C. How To Order 1. Specify part number for 19" (48.26cm) or 23" (58.42cm) fuse panel assembly as required. 2. Specify part number and quantities of fuses, shunts, lug adapters and other accessories from associated tables and application notes as required. 3. S pecify quantity and part number of lugs and adapters required (see Table K or the Ground Bars, Terminal Panels & Lugs data sheet from Accessories). Emerson Network Power. The global leader in enabling businesscritical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Outside Plant Integrated Cabinet Solutions Precision Cooling Site Monitoring and Services 2005 Emerson Network Power Energy Systems, North America, Inc. All rights reserved. Emerson Network Power Energy Systems 1122 F St. Lorain, OH Toll Free: (USA and Canada) Telephone: Fax: Web: EmersonNetworkPower.com/EnergySystems This publication is issued to provide outline information only which (unless agreed by Emerson Network Power Energy Systems, North America, Inc. in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Emerson Network Power Energy Systems, North America, Inc. reserves the right to alter without notice the specification, design or conditions of supply of any product or service. The Emerson logo is a trademark and a service mark of Emerson Electric Co. Emerson Network Power is a division of Emerson Electric Co. Vortex, Candeo and LORAIN are trademarks of Emerson Network Power Energy Systems, North America, Inc. 8 Printed in USA

Fuse Panels, Fuse Holders and Fuses

Fuse Panels, Fuse Holders and Fuses Fuse Panel Assembly 23" (8.42cm) FUSE Description of Panels E/W Fuse Positions and Accessories Fuse Type PANELS Fuse Table Fuse Cabinet Assembly Panel Height 4316000 ( 4) 0- A, (16) Additional Positions