LasTec Articulator. Parts Manual

Size: px

Start display at page:

Download "LasTec Articulator. Parts Manual"

Richard Townsend
6 years ago
Views:

1 LasTec Articulator Model 5ER Parts Manual Manual Part Number: Man-5ER98 LasTec A Division of Wood-Mizer Products, Inc. 85 N County Rd 00E Lizton, Indiana 9 Phone () 89- Fax ()

3 Table of Contents Page SECTION : DRIVE SYSTEM -. Pull Bar/Pivot Assembly Drive Assembly Gearbox ( and Prior) Gearbox ( Present) SECTION : MOWER DECKS -. Deck Pivot & Trap Door Assemblies Spindle Assemblies (Decks ER/ER/ER) Spindle Assembly (Deck ER) Idler Assembly (Deck ER) Idler Assembly (Decks ER/ER) Idler Assembly (Deck ER) Grass Chute & Mulching Plate Assemblies Decks and Covers Decks & Decals Belts Lift Chain Assemblies... - SECTION : WHEELS -. Rocker Leg Assembly (ER) Rocker Leg Assembly (ER) Rocker Leg Assembly (ER) Left & Right Swivel Wheel Assemblies Left & Right Fixed Wheel Assemblies x.5 Wheel Assemblies, Pneumatic & Foam-Filled x.5 Wheel Assemblies, Pneumatic & Foam-Filled... - Table of Contents 5ER/masterdoc050 iii

5 5ER Parts Index Sorted by Part Number Part No. Part Description Page Numbers 858 Housing Weldment, Spindle Housing Weldment, Spindle - 8 Pin Weldment - 8 Rod Weldment, Lock - 8 Pin Weldment - 8 Rod Weldment, Lock - 8 Pin Weldment Shaft Weldment, Spindle Shaft Weldment, Spindle Pin Weldment, Deck Pivot - 9 Plate, Grass Chute Bottom -8 9 Plate, Universal Trap Door - 9 Cover, ER Belt Rod End, /-0 Female - 98 Rod End, /-0 Female - 98 Rod End, /-0 Female - 99 Yoke Weldment, Right Wheel Yoke Weldment, Left Wheel Gearbox, SGCM500SAR Modified - 95 Decal, Rocker Height Adjustment Decal, Lastec Logo Decal, Articulator Logo Decal, Change Cut Height Decal, Pressure Washer Caution Deck Weldment, ER -9 9 Deck Weldment, ER -9 9 Deck Weldment, ER -9 9 Rocker Weldment, Deck EFD - 9 Rocker Weldment, Deck EFD - 9 Rocker Weldment, Deck EFD - 9 Block, Deck Locking - 9 Block, Deck Locking - 9 Block, Deck Locking Spacer, / Spacer, / Spacer, / - 9 Bearing Cup - 9 Bearing - 98 Pivot Weldment, Deck ER Pivot Weldment, Deck ER - 90 Rod Weldment, Lock Bracket Weldment, Rocker Limit - 90 Bracket Weldment, Rocker Limit - 99 Bracket Weldment, Rocker Limit - 98 Cover, ER Rocker Pivot Weldment, Deck ER - 98 Cover, 0 Chain Sleeve - 98 Cover, 0 Chain Sleeve - 98 Arm, Rocker Link - 98 Arm, Rocker Link - 98 Arm, Rocker Link Yoke Weldment, 9 ER Wheel Yoke Weldment, 9 ER Wheel - 99 Yoke Weldment, 9 ER Wheel Deck Weldment, ER Knob, /-0 Steel Hand Knob, /-0 Steel Hand - Page of

6 5ER Parts Index Sorted by Part Number Part No. Part Description Page Numbers 990 Knob, /-0 Steel Hand - 99 Rocker Weldment, Deck ER Rocker Weldment, Deck ER - 99 Rocker Weldment, Deck ER Flap, Rubber ER Flap, Rubber ER Flap, Rubber ER Washer, / ID x / OD x / Nylon Washer, / ID x / OD x / Nylon Chain, /0 x 0-90 Chain, /0 x - 9 Cover, 0 Chain Sleeve - 9 Cover, ER Belt -9 9 Cover, ER Drive Belt -9 9 Arm Weldment, Idler -5 0 Cover, ER Belt Pinion Shaft Spacer, / Knurled Spacer, / Knurled Spacer, / Knurled - A9 Wheel Assembly, 9 x.5, Foam-Filled -0 A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled - A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled - A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled - A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled -8 A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled -9 A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled -0 C0 Strip, Rubber Flap Clamping - F0500- Stud, Press-In, 5/- x / -0 F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F Bolt, /-0 x Hex Head Grade 5 - F Bolt, /-0 x Hex Head Grade 5-8 F Bolt, /-0 x -0 F Bolt, /-0 x / - F Bolt, /-0 x / - F Bolt, /-0 x / - F0500- Bolt, 5/-8 x Hex Head - F Bolt, /8- x / Hex Head Grade 5 - F Bolt, /8- x / Hex Head Grade 5 - F Bolt, /8- x / Hex Head Grade 5 - F Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F Bolt, /- x / HH FT Grd 5 - F Bolt, /8- x Hex Head Grade 5-9 F Bolt, /- x / Hex Head Grade 5-5 F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x Hex Head Grade 5 - F Bolt, /- x Hex Head Grade 5 - F Bolt, /- x Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5 - Page of

7 5ER Parts Index Sorted by Part Number Part No. Part Description Page Numbers F Bolt, 5/8-8 x / Hex Head Grade 5 - F Bolt, 5/8-8 x / Hex Head Grade 5 - F Bolt, /-0 x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 8 - F Nut, /8- Hex Nylon Lock -9 F Nut, /-0 Hex Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock -8 F Nut, -8 Hex Lock - F0500- Nut, 5/-8 Nylon Lock Jam - F0500- Nut, /-0 Nylon Lock Jam -5 F0500- Nut, /-0 Nylon Lock Jam - F0500- Nut, /-0 Half Nylon Lock - F0500- Nut, /-0 Half Nylon Lock - F0500- Nut, /-0 Half Nylon Lock - F0500- Nut, /-0 Half Nylon Lock -9 F0500- Nut, /- Nylon Lock Jam - F0500- Nut, /- Nylon Lock Jam - F0500- Nut, /- Half Nylon Lock - F0500- Nut, /- Half Nylon Lock - F0500- Nut, /- Half Nylon Lock - F Nut, /- Hex Nylon Lock - F Nut, /8- Hex - F Nut, /8- Hex - F0500- Nut, Lug, 5/-, Tapered -0 F0500- Nut, /-0 Hex Jam - F0500- Nut, /-0 Hex Jam - F0500- Nut, /-0 Hex Jam - F0500- Nut, /8- Wing -9 F0500- Nut, Hex, /-0-0 F Nut, /-0 Nylon Lock -8 F Nut, /-0 Nylon Lock Jam - F Nut, /-0 Nylon Lock Jam - F Nut, /-0 Nylon Lock Jam - F Nut, /- Nylon Lock -5 F Nut, /- Nylon Lock - F Nut, /- Nylon Lock - F Nut, /- Hex Nylon Lock - F Nut, /- Hex Nylon Lock - F Nut, /- Hex Nylon Lock - F Nut, /8- Hex Jam - F050-0 Washer, /8 x /8 Fender - F050-0 Washer, /8 x /8 Fender - F050-0 Washer, /8 x /8 Fender - F050- Washer, / Split Lock - F050- Washer, Split Lock, / - F050- Washer, Split Lock, / - F050- Washer, Split Lock, / - F050- Washer, Split Lock, / -0 F050- Washer, 5/ SAE Flat - F050- Washer, / SAE Flat -5 F050- Washer, / SAE Flat - F050- Washer,/ SAE Flat - F050- Washer, / SAE Flat - Page of

8 5ER Parts Index Sorted by Part Number Part No. Part Description Page Numbers F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050-0 Washer, 5/8 Standard Flat - F050-0 Washer, 5/8 Standard Flat - F050- Washer, / SAE Flat - F050- Washer, /8 Fender -9 F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050-0 Washer, / SAE Flat - F050-0 Washer, / SAE Flat -8 F050- Washer, /8 SAE Flat -9 F050- Washer, / SAE Flat - F050- Washer, / SAE Flat - F050- Washer, /8 SAE Flat - F050- Washer, /8 SAE Flat - F050-5 Washer,.5 ID x.5 OD x /8 - F050-5 Washer,.5 ID x.5 OD x /8 - F050-5 Washer,.5 ID x.5 OD x /8 - F050-9 Washer, / Split Lock - F050-9 Washer, / Split Lock - F050-9 Washer, / Split Lock - F050- Pin, /8 x Cotter -8 F050- Pin, #0 Hitch - F050- Pin, #0 Hitch - F050- Pin, # Hitch -8 F050- Pin, # Hitch - F050- Pin, # Hitch - F050- Pin, # Hitch - F050-0 Pin, 5/ x / Clevis - F050-0 Pin, 5/ x / Clevis - F050-0 Pin, 5/ x / Clevis - F050-5 Bolt, /-0 x Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5-8 M0 Plate, Grass Chute -8 P0 Bearing,05 RS Top Spindle - P0 Bearing,05 RS Top Spindle - P0 Bearing, 0 TGS Bottom Spindle - P0 Bearing, 0 TGS Bottom Spindle - P05 O-Ring, / x / - P05 O-Ring, / x / - P0 Fitting, /-8 Straight Grease - P0 Fitting, /-8 Straight Grease -9 P0 Fitting, /-8 Straight Grease - P0 Fitting, /-8 Straight Grease - P0 Fitting, /-8 Straight Grease - P08 Fitting, /8 NPT Straight Grease - P08 Fitting, /8 NPT Straight Grease - P09 Bushing, Bronze, " ID x /" OD - P09 Bushing, ID x / OD Flanged - P09 Bushing, ID x / OD Flanged - P09 Bushing, Bronze, ID - Page of

9 5ER Parts Index Sorted by Part Number Part No. Part Description Page Numbers P09 Bushing, Bronze, ID - P09 Bushing, Bronze, ID - P09 Bushing, Flanged Bronze -8 P09 Bushing, Flanged Bronze -9 P0 Pin, /8 x 5/ Clevis -8 P0 Pin, /8 x 5/ Clevis -9 P Ring, Pull -8 P Ring, Pull -9 P Pin, Rear Wheel Pivot - P Fitting, /-8 90 Grease -5 P Fitting, /-8 90 Grease - P Fitting, /-8 90 Grease -9 P Fitting, /-8 x 90 Grease - P Fitting, /-8 x 90 Grease - P Fitting, /-8 x 90 Grease - P5 Decal, 50 Max. -0 P0 Sheave, BK0H - P9 Decal, Operator Seat Warning -0 P8 Pin, x / Clevis - P Pin Assembly, Lift - P8 Bushing, /8 Type H Split Taper - P90 Wheel Assembly, 9 x.5, Pneumatic -0 P9 Hub/Bearing Assembly -0 P9 Bearing, Tapered Roller, / -0 P9 Bearing Seal -0 P9 Grease Zerk, /-8, 5-0 P95 Wheel/Hub Assembly, 9 x.5, Pneumatic -0 P9 Bearing Spacer, / ID x / - P9 Bearing Spacer, / ID x / - P9 Bearing Spacer, / ID x / - P9 Spacer, / OD x / ID -8 P9 Spacer,. OD x.9 ID x.5-9 P9 Hub Assembly -0 P0 Seal, /8 - P5 Gear, 0 Teeth - P Gearbox Casting, Top - P Bolt, /8- x / SH - P8 Key, 5/ SQ x. - P9 Retaining Ring - P0 Pipe Plug, / NPT - P Breather Plug - P Cross Shaft - P Gearbox Casting, Bottom (w/breather) - P0 Bearing Race Insert -0 P0 Bushing, / ID x 5/8 Bronze -5 P0 Bushing, / ID x 5/8 Bronze - P0 Key, / SQ x 5/8 - P0 Key, / SQ x 5/8 - P08 Pulley, Idler - P0 Spring, x -5 P0 Spring, x x.8 Extension - P0 Spring, x Extension - P Pad, Gearbox Swivel - P Bushing, /8 ID x Bronze -8 P9 Link,.8 Chain Snap - P0 Spring, 80 LH Torsion -8 P Decal, Thrown Objects Danger -8 Page 5 of

10 5ER Parts Index Sorted by Part Number Part No. Part Description Page Numbers P Decal, Thrown Objects Warning -0 P8 Decal, Rotating Blades Danger -8 P8 Decal, Rotating Blades Danger -0 P08 Pulley, Flat Idler -5 P08 Pulley, Flat Idler - P09 Pulley, V-Groove Idler -5 P09 Pulley, V-Groove Idler - P0 Blade, 5, High-Lift - P0 Blade, 5, High-Lift - P0 Belt, V - P0 Belt, 8580 V - P Bearing, ID x / OD x / Flanged Oil - P Belt, P Belt, 8550 V - P59 Shaft, / Bondioli PTO - P8 Bushing, Steel, / ID x OD x 5/8 - P8 Decal, Guards Warning -0 P8 Decal, Operator Seat Warning -0 P8 Washer, ID Wave - P8 Washer, ID Wave - P8 Washer, ID Wave - P8 Washer, Wave -8 P8 Washer, Wave -9 T0 Spacer, / OD x / ID x / - T0 Spacer, / OD x / ID x / - T0 Spacer, / OD x / ID x / - T0 Spacer, / OD x / ID x / Thick -8 T0 Spacer, / OD x / ID x / Thick -9 T0 Spacer, / OD x / ID x Thick -8 T0 Spacer, / OD x / ID x Thick -9 T5 Bearing Spacer, / ID x /8 - Page of

11 5ER Parts Index Sorted by Description Part No. Part Description Page Numbers 9 Arm Weldment, Idler -5 W Arm Weldment, Idler - W8 Arm Weldment, Idler - 98 Arm, Rocker Link - 98 Arm, Rocker Link - 98 Arm, Rocker Link - W8 Bar Weldment, Pull - 9 Bearing - 9 Bearing Cup - P0 Bearing Race Insert -0 P9 Bearing Seal -0 P9 Bearing Spacer, / ID x / - P9 Bearing Spacer, / ID x / - P9 Bearing Spacer, / ID x / - T5 Bearing Spacer, / ID x /8 - T5 Bearing Spacer, / ID x /8 - T5 Bearing Spacer, / ID x /8 - P Bearing, ID x / OD x / Flanged Oil - P0 Bearing, 0 TGS Bottom Spindle - P0 Bearing, 0 TGS Bottom Spindle - P9 Bearing, Tapered Roller, / -0 P0 Bearing,05 RS Top Spindle - P0 Bearing,05 RS Top Spindle - P Belt, P Belt, 8550 V - P0 Belt, 8580 V - P0 Belt, V - P0 Blade, 5, High-Lift - P0 Blade, 5, High-Lift - 9 Block, Deck Locking - 9 Block, Deck Locking - 9 Block, Deck Locking - F Bolt, /- x / Hex Head Grade 8 - F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x / Hex Head Grade 5-5 F Bolt, /- x / Hex Head Grade 5 - F Bolt, /- x Hex Head Grade 5 - F Bolt, /- x Hex Head Grade 5 - F Bolt, /- x Hex Head Grade 5 - F Bolt, /-0 x -0 F Bolt, /-0 x Hex Head Grade 5 - F Bolt, /-0 x Hex Head Grade 5-8 F Bolt, /-0 x / - F Bolt, /-0 x / - F Bolt, /-0 x / - F Bolt, /-0 x / Hex Head Grade 5 - F050-5 Bolt, /-0 x Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5 - F050-0 Bolt, /-0 x / Hex Head Grade 5-8 F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - Page of

12 5ER Parts Index Sorted by Description Part No. Part Description Page Numbers F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, /8- x / Hex Head Grade 5 - F Bolt, /8- x Hex Head Grade 5-9 P Bolt, /8- x / SH - F Bolt, /8- x / Hex Head Grade 5 - F Bolt, /8- x / Hex Head Grade 5 - F Bolt, /8- x / Hex Head Grade 5 - F Bolt, /8- x / Hex Head Grade 5 - F0500- Bolt, 5/-8 x Hex Head - F Bolt, 5/8-8 x / Hex Head Grade 5 - F Bolt, 5/8-8 x / Hex Head Grade 5 - F Bolt, /- x / HH FT Grd Bracket Weldment, Rocker Limit - 90 Bracket Weldment, Rocker Limit - 99 Bracket Weldment, Rocker Limit - P Breather Plug - P09 Bushing, Flanged Bronze -8 P09 Bushing, Flanged Bronze -9 P09 Bushing, ID x / OD Flanged - P09 Bushing, ID x / OD Flanged - P0 Bushing, / ID x 5/8 Bronze -5 P0 Bushing, / ID x 5/8 Bronze - P Bushing, /8 ID x Bronze -8 P8 Bushing, /8 Type H Split Taper - P09 Bushing, Bronze, " ID x /" OD - P09 Bushing, Bronze, ID - P09 Bushing, Bronze, ID - P09 Bushing, Bronze, ID - P8 Bushing, Steel, / ID x OD x 5/8 - W Chain Weldment, E Deck Lift Chain, /0 x 0-90 Chain, /0 x - 98 Cover, 0 Chain Sleeve - 98 Cover, 0 Chain Sleeve - 9 Cover, 0 Chain Sleeve - 0 Cover, ER Belt -9 9 Cover, ER Drive Belt -9 W90 Cover, ER Drive Pulley -9 9 Cover, ER Belt -9 9 Cover, ER Belt Cover, ER Rocker -9 P Cross Shaft - P5 Decal, 50 Max Decal, Articulator Logo Decal, Change Cut Height -0 P8 Decal, Guards Warning Decal, Lastec Logo -0 P9 Decal, Operator Seat Warning -0 P8 Decal, Operator Seat Warning Decal, Pressure Washer Caution Decal, Rocker Height Adjustment -0 P8 Decal, Rotating Blades Danger -8 P8 Decal, Rotating Blades Danger -0 P Decal, Thrown Objects Danger -8 P Decal, Thrown Objects Warning -0 9 Deck Weldment, ER -9 Page of

13 5ER Parts Index Sorted by Description Part No. Part Description Page Numbers 95 Deck Weldment, ER -9 9 Deck Weldment, ER Deck Weldment, ER -9 P Fitting, /-8 90 Grease -5 P Fitting, /-8 90 Grease - P Fitting, /-8 90 Grease -9 P0 Fitting, /-8 Straight Grease - P0 Fitting, /-8 Straight Grease -9 P0 Fitting, /-8 Straight Grease - P0 Fitting, /-8 Straight Grease - P0 Fitting, /-8 Straight Grease - P Fitting, /-8 x 90 Grease - P Fitting, /-8 x 90 Grease - P Fitting, /-8 x 90 Grease - P08 Fitting, /8 NPT Straight Grease - P08 Fitting, /8 NPT Straight Grease Flap, Rubber ER Flap, Rubber ER Flap, Rubber ER - P5 Gear, 0 Teeth - P Gearbox Casting, Bottom (w/breather) - P Gearbox Casting, Top Gearbox, SGCM500SAR Modified - P9 Grease Zerk, /-8, Housing Weldment, Spindle Housing Weldment, Spindle - P9 Hub Assembly -0 P9 Hub/Bearing Assembly -0 P0 Key, / SQ x 5/8 - P0 Key, / SQ x 5/8 - P8 Key, 5/ SQ x Knob, /-0 Steel Hand Knob, /-0 Steel Hand Knob, /-0 Steel Hand - P9 Link,.8 Chain Snap - W Mount Weldment, Gearbox - F Nut, /8- Hex - F Nut, /8- Hex - F0500- Nut, /- Half Nylon Lock - F0500- Nut, /- Half Nylon Lock - F0500- Nut, /- Half Nylon Lock - F Nut, /- Hex Nylon Lock - F Nut, /- Hex Nylon Lock - F Nut, /- Hex Nylon Lock - F Nut, /- Nylon Lock -5 F Nut, /- Nylon Lock - F Nut, /- Nylon Lock - F0500- Nut, /- Nylon Lock Jam - F0500- Nut, /- Nylon Lock Jam - F0500- Nut, /-0 Hex Jam - F0500- Nut, /-0 Hex Jam - F0500- Nut, /-0 Hex Jam - F Nut, /-0 Nylon Lock Jam - F Nut, /-0 Nylon Lock Jam - F Nut, /-0 Nylon Lock Jam - F Nut, /-0 Nylon Lock -8 F Nut, -8 Hex Lock - Page of

14 5ER Parts Index Sorted by Description Part No. Part Description Page Numbers F0500- Nut, /-0 Half Nylon Lock - F0500- Nut, /-0 Half Nylon Lock - F0500- Nut, /-0 Half Nylon Lock - F0500- Nut, /-0 Half Nylon Lock -9 F Nut, /-0 Hex Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock - F Nut, /-0 Nylon Lock -8 F0500- Nut, /-0 Nylon Lock Jam -5 F0500- Nut, /-0 Nylon Lock Jam - F Nut, /8- Hex Nylon Lock -9 F0500- Nut, /8- Wing -9 F0500- Nut, 5/-8 Nylon Lock Jam - F Nut, /- Hex Nylon Lock - F Nut, /8- Hex Jam - F0500- Nut, Hex, /-0-0 F0500- Nut, Lug, 5/-, Tapered -0 P05 O-Ring, / x / - P05 O-Ring, / x / - P Pad, Gearbox Swivel - P Pin Assembly, Lift - 8 Pin Weldment - 8 Pin Weldment - 8 Pin Weldment Pin Weldment, Deck Pivot - F050- Pin, #0 Hitch - F050- Pin, #0 Hitch - F050- Pin, # Hitch -8 F050- Pin, # Hitch - F050- Pin, # Hitch - F050- Pin, # Hitch - F050- Pin, /8 x Cotter -8 P8 Pin, x / Clevis - P0 Pin, /8 x 5/ Clevis -8 P0 Pin, /8 x 5/ Clevis -9 F050-0 Pin, 5/ x / Clevis - F050-0 Pin, 5/ x / Clevis - F050-0 Pin, 5/ x / Clevis - P Pin, Rear Wheel Pivot Pinion Shaft - P0 Pipe Plug, / NPT - 98 Pivot Weldment, Deck ER Pivot Weldment, Deck ER - 98 Pivot Weldment, Deck ER - W Plate Weldment, Grass Chute Mount -8 W9 Plate Weldment, Mulching -8 M0 Plate, Grass Chute -8 9 Plate, Grass Chute Bottom -8 9 Plate, Universal Trap Door - T5 Pulley, Double Groove - P08 Pulley, Flat Idler -5 P08 Pulley, Flat Idler - P08 Pulley, Idler - T0 Pulley, Quad - P09 Pulley, V-Groove Idler -5 Page of

15 5ER Parts Index Sorted by Description Part No. Part Description Page Numbers P09 Pulley, V-Groove Idler - P9 Retaining Ring - P Ring, Pull -8 P Ring, Pull -9 9 Rocker Weldment, Deck EFD - 9 Rocker Weldment, Deck EFD - 9 Rocker Weldment, Deck EFD - 99 Rocker Weldment, Deck ER Rocker Weldment, Deck ER - 99 Rocker Weldment, Deck ER - 98 Rod End, /-0 Female - 98 Rod End, /-0 Female - 98 Rod End, /-0 Female - 8 Rod Weldment, Lock - 8 Rod Weldment, Lock - 90 Rod Weldment, Lock - P0 Seal, /8-880 Shaft Weldment, Spindle Shaft Weldment, Spindle - P59 Shaft, / Bondioli PTO - P0 Sheave, BK0H - T0 Spacer, / OD x / ID x / - T0 Spacer, / OD x / ID x / - T0 Spacer, / OD x / ID x / - T0 Spacer, / OD x / ID x / Thick -8 T0 Spacer, / OD x / ID x / Thick -9 T0 Spacer, / OD x / ID x Thick -8 T0 Spacer, / OD x / ID x Thick -9 T Spacer,. OD x.5 ID x.9-9 P9 Spacer,. OD x.9 ID x Spacer, / Spacer, / Spacer, / Spacer, / Knurled Spacer, / Knurled Spacer, / Knurled - P9 Spacer, / OD x / ID -8 P0 Spring, x -5 P0 Spring, x Extension - P0 Spring, x x.8 Extension - P0 Spring, 80 LH Torsion -8 W5 Strap Weldment, -Point Pivot - C0 Strip, Rubber Flap Clamping - F0500- Stud, Press-In, 5/- x / -0 F050-5 Washer,.5 ID x.5 OD x /8 - F050-5 Washer,.5 ID x.5 OD x /8 - F050-5 Washer,.5 ID x.5 OD x /8 - F050- Washer, / SAE Flat -5 F050- Washer, / SAE Flat - F050- Washer, / SAE Flat - F050-9 Washer, / Split Lock - F050-9 Washer, / Split Lock - F050-9 Washer, / Split Lock - F050-0 Washer, / SAE Flat - F050-0 Washer, / SAE Flat -8 F050- Washer, / Split Lock - P8 Washer, ID Wave - Page 5 of

16 5ER Parts Index Sorted by Description Part No. Part Description Page Numbers P8 Washer, ID Wave - P8 Washer, ID Wave - P8 Washer, Wave -8 P8 Washer, Wave Washer, / ID x / OD x / Nylon Washer, / ID x / OD x / Nylon - F050- Washer, / SAE Flat - F050- Washer, / SAE Flat - F050- Washer, /8 Fender -9 F050- Washer, /8 SAE Flat -9 F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050-0 Washer, /8 x /8 Fender - F050-0 Washer, /8 x /8 Fender - F050-0 Washer, /8 x /8 Fender - F050- Washer, 5/ SAE Flat - F050-0 Washer, 5/8 Standard Flat - F050-0 Washer, 5/8 Standard Flat - F050- Washer, / SAE Flat - F050- Washer, /8 SAE Flat - F050- Washer, /8 SAE Flat - F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050- Washer, /8 Split Lock - F050- Washer, Split Lock, / - F050- Washer, Split Lock, / - F050- Washer, Split Lock, / - F050- Washer, Split Lock, / -0 F050- Washer,/ SAE Flat - Page of

17 Drive System SECTION : DRIVE SYSTEM Drive System 5ER/masterdoc050 -

18 Drive System Pull Bar/Pivot Assembly ER00-5 FIG. -. Pull Bar/Pivot Assembly Ref. No. Part No. Part Description W8 Bar Weldment, Pull P Pin Assembly, Lift (Includes lock washer and nut below) F050- Washer, /8 Split Lock F Nut, /8- Hex Jam 5 W5 Strap Weldment, -Point Pivot F050- Washer, / SAE Flat F Bolt, /-0 x / Hex Head Grade 5 8 F Nut, /-0 Hex Nylon Lock 9 P Pin, Rear Wheel Pivot 0 F050- Pin, #0 Hitch W Chain Weldment, E Deck Lift 098 Cover, 0 Chain Sleeve F Bolt, /- x / Hex Head Full Thread Grade 5 F050- Washer, / SAE Flat 5 F Nut, /- Hex Nylon Lock P09 Bushing, Bronze, " ID x /" OD - 5ER/masterdoc050 Drive System

19 Drive System Drive Assembly ER00- FIG. -. Drive Assembly Ref. No. Part No. Part Description W Mount Weldment, Gearbox 0950 Gearbox, SGCM500SAR Modified (See Section. for gearbox parts) P0 Sheave, BK0H P8 Bushing, /8 Type H Split Taper 5 F050-9 Washer, / Split Lock F Bolt, /- x / Hex Head Grade 5 F050- Washer, / SAE Flat 8 F050-5 Bolt, /-0 x Hex Head Grade 5 9 F Nut, /-0 Nylon Lock 0 P Pad, Gearbox Swivel P Bearing, ID x / OD x / Flanged Oiltite P09 Bushing, ID x / OD Flanged F Nut, -8 Hex Lock N/S P59 Shaft, / Bondioli PTO N/S P Belt, 8550 Drive System 5ER/masterdoc050 -

20 Drive System Gearbox ( and Prior) XM0 FIG. -. Gearbox ( and Prior) P Gearbox Casting, Top P Gearbox Casting, Bottom (w/breather) P Cross Shaft 0995 Shaft, Pinion Gear Pinion Shaft P5 Gear, 0 Teeth 09 Bearing 8 09 Bearing Cup 9 P9 Retaining Ring 0 P8 Key, 5/ SQ x. P0 Seal, /8 P Breather Plug P0 Pipe Plug, / NPT P Bolt, /8- x / SH Starting with serial number 0099 the Superior Gearbox internal shafts have changed. If components fail, Kit number needs to be ordered. Any failure after this serial number cam order individual parts. - 5ER/masterdoc050 Drive System

21 Drive System Gearbox ( Present). Gearbox ( Present) Ref. No. Part No. Part Description P Top, Gear Box P Bottom, Gear Box 0995 Shaft, Pinion Gear 099 Shaft, Crown Gear 5 09 Bearing Cup 09 Bearing Cone, A P0 Seal, In/Output 8 P Bolt, /8- x.5 9 P0 Plug, NPT Hex / 0 P9 Ring, Superior Gear Box Retaining P Plug, Pre Relief -5 5ER/masterdoc050 Drive System

22 LASTEC This Page Has Been Intentionally Left Blank

23 Mower Decks SECTION : MOWER DECKS Mower Decks 5ER/masterdoc050 -

24 Mower Decks Deck Pivot & Trap Door Assemblies ER00-5 FIG. -. Deck Pivot & Trap Door Assemblies Ref. No. Part No. Part Description Pin Weldment, Deck Pivot P8 Bushing, Steel, / ID x OD x 5/8 F Bolt, /8-x/ HH Gr5 W/Nylon Patch F Bolt, /8- x / Hex Head Grade 5 F050- Washer, /8 Split Lock 5 F Bolt, /- x / Hex Head Grade 8 F0500- Nut, /- Nylon Lock Jam 09 Plate, Universal Trap Door Flap, Rubber ER 9 C0 Strip, Rubber Flap Clamping 0 F Bolt, /-0 x Hex Head Grade 5 F050- Washer, / Split Lock F050-0 Washer, / SAE Flat 0998 Flap, Rubber ER 0999 Flap, Rubber ER 5 P0 Fitting, /-8 Straight Grease Lastec engineering has made an improvment to the deck pivots by adding a P0 grease zerk. Along with this change, the f has ben directly replaced with F ER/masterdoc050 Mower Decks

25 Mower Decks Spindle Assemblies (Decks ER/ER/ER) ER00-. Spindle Assemblies (Decks ER/ER/ER) Ref. No. Part No. Part Description 0858 Housing Weldment, Spindle P0 Bearing,05 RS Top Spindle P0 Bearing, 0 TGS Bottom Spindle P05 O-Ring, / x / 5 T5 Pulley, Double Groove F050- Washer, /8 Split Lock F050- Washer, /8 SAE Flat 8 F Nut, /8- Hex 9 P08 Fitting, /8 NPT Straight Grease 0 F Bolt, /- x / Hex Head Grade 5 F050-9 Washer, / Split Lock 0880 Shaft Weldment, Spindle P0 Key, / SQ x 5/8 P0 Blade, 5, High-Lift 5 F Bolt, 5/8-8 x / Hex Head Grade 5 F050-0 Washer, 5/8 Standard Flat 0850 Washer, / ID x / OD x / Thick Nylon 8 F Screw, /-0x/ Serrated Cup Pt Set BO FIG. - Mower Decks 5ER/masterdoc050 -

26 Mower Decks Spindle Assembly (Deck ER) Spindle Assembly (Deck ER) 5 5ER00- Ref. No. Part No. Part Description 0858 Housing Weldment, Spindle P0 Bearing,05 RS Top Spindle P0 Bearing, 0 TGS Bottom Spindle P05 O-Ring, / x / 5 T0 Pulley, Quad F050- Washer, /8 Split Lock F050- Washer, /8 SAE Flat 8 F Nut, /8- Hex 9 P08 Fitting, /8 NPT Straight Grease 0 F Bolt, /- x / Hex Head Grade 5 F050-9 Washer, / Split Lock 0880 Shaft Weldment, Spindle P0 Key, / SQ x 5/8 P0 Blade, 5, High-Lift 5 F Bolt, 5/8-8 x / Hex Head Grade 5 F050-0 Washer, 5/8 Standard Flat 0850 Washer, / ID x / OD x / Thick Nylon 8 F Screw, /-0x/ Serrated Cup Pt Set BO FIG ER/masterdoc050 Mower Decks

27 Mower Decks Idler Assembly (Deck ER) ER00- FIG. -. Idler Assembly (Deck ER) Ref. No. Part No. Part Description 09 Arm Weldment, Idler P Fitting, /-8 90 Grease P0 Bushing, / ID x 5/8 Bronze F0500- Nut, /-0 Nylon Lock Jam 5 F Nut, /- Nylon Lock F050- Washer, / SAE Flat P09 Pulley, V-Groove Idler 8 F Bolt, /- x / Hex Head Grade 5 9 P08 Pulley, Flat Idler 0 P0 Spring, x Mower Decks 5ER/masterdoc050-5

28 Mower Decks Idler Assembly (Decks ER/ER) ES005 8 FIG Idler Assembly (Decks ER/ER) Ref. No. Part No. Part Description W Arm Weldment, Idler P0 Bushing, / ID x 5/8 Bronze F0500- Nut, /-0 Nylon Lock Jam P09 Pulley, V-Groove Idler 5 P08 Pulley, Flat Idler F Bolt, /- x / Hex Head Grade 5 F050- Washer, / SAE Flat 8 F Nut, /- Nylon Lock 9 P Fitting, /-8 90 Grease 0 P0 Spring, x x.8 Extension - 5ER/masterdoc050 Mower Decks

29 Mower Decks Idler Assembly (Deck ER) ER00- FIG. -. Idler Assembly (Deck ER) Ref. No. Part No. Part Description W8 Arm Weldment, Idler P09 Bushing, ID x / OD Flanged P8 Pin, x / Clevis F050- Pin, #0 Hitch 5 P0 Fitting, /-8 Straight Grease F Bolt, /- x / Hex Head Grade 5 P08 Pulley, Idler 8 F050- Washer,/ SAE Flat 9 F0500- Nut, /- Nylon Lock Jam 0 P0 Spring, x Extension F Nut, /- Nylon Lock Mower Decks 5ER/masterdoc050 -

30 Mower Decks Grass Chute & Mulching Plate Assemblies FIG. -. Grass Chute & Mulching Plate Assemblies REF DESCRIPTION PART# QTY. Chute Cover, 5e Grass M0 Mount Wldmnt, Grass Chute E W Plate, Grass Chute Mount Bottom 09 Bolt, /-0x Hh Gr5 F Washer, / Sae Flat F050-0 Nut, /-0 Nyl Lock F Bushing,bronz /8 Id X / Od X P 8 Spring, 80 Deg Torsion Left Hand P0 9 Pin, /8x Cotter F050-0 Plate Wldmnt, Mulching Es W9 Pin, /8x / Safety P05059 Decal, Danger, "Rotating Blades" P8 Decal, Danger, "Thrown Objects" P -8 5ER/masterdoc050 Mower Decks

31 Mower Decks Decks and Covers ER00- FIG Decks and Covers Ref. No. Part No. Part Description 09 Deck Weldment, ER Deck Weldment, ER 095 Deck Weldment, ER 09 Deck Weldment, ER 5 00 Cover, ER Belt 098 Cover, ER Rocker 09 Cover, ER Belt 8 09 Cover, ER Drive Belt 9 W90 Cover, ER Drive Pulley 0 09 Cover, ER Belt F050- Washer, /8 Fender F0500- Nut, /8- Wing F Nut, /8- Hex Nylon Lock F050- Washer, /8 SAE Flat 5 F Bolt, /8- x Hex Head Grade 5 P Fitting, /-8 90 Grease P0 Fitting, /-8 Straight Grease Mower Decks 5ER/masterdoc050-9

32 Tall Short Ta ll Short Mower Decks Decks & Decals ER00- FIG Decks & Decals Ref. No. Part No. Part Description P8 Decal, Rotating Blades Danger P8 Decal, Operator Seat Warning P8 Decal, Guards Warning P Decal, Thrown Objects Warning Decal, Lastec Logo Decal, Articulator Logo P5 Decal, 50 Max Decal, Pressure Washer Caution Decal, Change Cut Height 0 P9 Decal, Operator Seat Warning 095 Decal, Rocker Height Adjustment -0 5ER/masterdoc050 Mower Decks

33 Mower Decks Belts 5ER00-8 FIG Belts Ref. No. Part No. Part Description P0 Belt, V P Belt, 8550 V P0 Belt, 8580 V Mower Decks 5ER/masterdoc050 -

34 Mower Decks Lift Chain Assemblies 8 5 5ER00-5 FIG. -. Lift Chain Assemblies Ref. No. Part No. Part Description 090 Chain, /0 x P9 Link,.8 Chain Snap 09 Cover, 0 Chain Sleeve F0500- Bolt, 5/-8 x Hex Head 5 F050- Washer, 5/ SAE Flat F0500- Nut, 5/-8 Nylon Lock Jam 0908 Chain, /0 x Cover, 0 Chain Sleeve - 5ER/masterdoc050 Mower Decks

35 Wheels SECTION : WHEELS Wheels 5ER/masterdoc050 -

36 Wheels Rocker Leg Assembly (ER). Rocker Leg Assembly (ER) Ref. No. Part No. Part Description 099 Rocker Weldment, Deck ER (Serial Numbers Present) 09 Rocker Weldment, Deck EFD (Serial Numbers ) 090 Rod Weldment, Lock 0950 Spacer, / Spacer, / Knurled Knob, /-0 Steel Hand F Nut, /-0 Nylon Lock Jam 098 Rod End, /-0 Female 8 F0500- Nut, /-0 Hex Jam 9 F Bolt, /- x Hex Head Grade 5 0 F Nut, /- Hex Nylon Lock F0500- Nut, /- Half Nylon Lock F0500- Nut, /-0 Half Nylon Lock 098 Pivot Weldment, Deck ER 08 Pin Weldment 5 F050- Washer, Split Lock, / F Bolt, /-0 x / P09 Bushing, Bronze, ID 8 09 Block, Deck Locking 9 F050- Washer, /8 Split Lock 0 F0500- Bolt, /8- x / Hex Head Grade Bracket Weldment, Rocker Limit 098 Arm, Rocker Link F050-0 Pin, 5/ x / Clevis F050- Pin, # Hitch 5 A50 Wheel Assembly, 9" x.5" Foam FIlled Wkee 0. P9 Bearing Spacer, / ID x / T5 Bearing Spacer, / ID x /8 8 P Fitting, /-8 x 90 Grease Yoke Weldment, 9 ER Wheel 0 F050-0 Bolt, /-0 x / Hex Head Grade 5 F Nut, /-0 Nylon Lock T0 Spacer, / OD x / ID x / F050-5 Washer,.5 ID x.5 OD x /8 P8 Washer, ID Wave 5 F050-0 Washer, /8 x /8 Fender F0500- Bolt, /8- x / Hex Head Grade 5 F Bolt, /8- x / Hex Head Grade 5 8 P0 Fitting, /-8 Straight Grease - 5ER/masterdoc050 Wheels

37 Wheels Rocker Leg Assembly (ER) ER00-9 FIG. -: ROCKER LEG ASSEMBLY (ER) Wheels 5ER/masterdoc050 -

38 Wheels Rocker Leg Assembly (ER). Rocker Leg Assembly (ER) Ref. No. Part No. Part Description 0999 Rocker Weldment, Deck ER (Serial Numbers Present) 09 Rocker Weldment, Deck EFD (Serial Numbers ) 090 Rod Weldment, Lock 0950 Spacer, / Spacer, / Knurled Knob, /-0 Steel Hand F Nut, /-0 Nylon Lock Jam 098 Rod End, /-0 Female 8 F0500- Nut, /-0 Hex Jam 9 F Bolt, /- x Hex Head Grade 5 0 F Nut, /- Hex Nylon Lock F0500- Nut, /- Half Nylon Lock F0500- Nut, /-0 Half Nylon Lock 0988 Pivot Weldment, Deck ER 08 Pin Weldment 5 F050- Washer, Split Lock, / F Bolt, /-0 x / P09 Bushing, Bronze, ID 8 09 Block, Deck Locking 9 F050- Washer, /8 Split Lock 0 F0500- Bolt, /8- x / Hex Head Grade Bracket Weldment, Rocker Limit 098 Arm, Rocker Link F050-0 Pin, 5/ x / Clevis F050- Pin, # Hitch 5 A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled P9 Bearing Spacer, / ID x / T5 Bearing Spacer, / ID x /8 8 P Fitting, /-8 x 90 Grease Yoke Weldment, 9 ER Wheel 0 F050-0 Bolt, /-0 x / Hex Head Grade 5 F Nut, /-0 Nylon Lock T0 Spacer, / OD x / ID x / F050-5 Washer,.5 ID x.5 OD x /8 P8 Washer, ID Wave 5 F050-0 Washer, /8 x /8 Fender F0500- Bolt, /8- x / Hex Head Grade 5 F Bolt, /8- x / Hex Head Grade 5 8 P0 Fitting, /-8 Straight Grease. - 5ER/masterdoc050 Wheels

39 Wheels Rocker Leg Assembly (ER) ER FIG. -: ROCKER LEG ASSEMBLY (ER) Wheels 5ER/masterdoc050-5

40 Wheels Rocker Leg Assembly (ER). Rocker Leg Assembly (ER) Ref. No. Part No. Part Description 099 Rocker Weldment, Deck ER (Serial Numbers Present) 09 Rocker Weldment, Deck EFD (Serial Numbers ) 090 Rod Weldment, Lock 0950 Spacer, / Spacer, / Knurled Knob, /-0 Steel Hand F Nut, /-0 Nylon Lock Jam 098 Rod End, /-0 Female 8 F0500- Nut, /-0 Hex Jam 9 F Bolt, /- x Hex Head Grade 5 0 F Nut, /- Hex Nylon Lock F0500- Nut, /- Half Nylon Lock F0500- Nut, /-0 Half Nylon Lock 098 Pivot Weldment, Deck ER 08 Pin Weldment 5 F050- Washer, Split Lock, / F Bolt, /-0 x / P09 Bushing, Bronze, ID 8 09 Block, Deck Locking 9 F050- Washer, /8 Split Lock 0 F0500- Bolt, /8- x / Hex Head Grade Bracket Weldment, Rocker Limit 098 Arm, Rocker Link F050-0 Pin, 5/ x / Clevis F050- Pin, # Hitch 5 F050- Washer, / SAE Flat A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled P9 Bearing Spacer, / ID x / 8 T5 Bearing Spacer, / ID x /8 9 P Fitting, /-8 x 90 Grease Yoke Weldment, 9 ER Wheel F050-0 Bolt, /-0 x / Hex Head Grade 5 F Nut, /-0 Nylon Lock T0 Spacer, / OD x / ID x / F050-5 Washer,.5 ID x.5 OD x /8 5 P8 Washer, ID Wave F050-0 Washer, /8 x /8 Fender F0500- Bolt, /8- x / Hex Head Grade 5 8 F Bolt, /8- x / Hex Head Grade 5 9 P0 Fitting, /-8 Straight Grease - 5ER/masterdoc050 Wheels

41 Wheels Rocker Leg Assembly (ER) FIG. -: ROCKER LEG ASSEMBLY (ER) Wheels 5ER/masterdoc050 -

42 Wheels Left & Right Swivel Wheel Assemblies. Left & Right Swivel Wheel Assemblies Ref. No. Part No. Part Description W88 Yoke Weldment, Left Wheel (Serial Numbers Present) 0850 Yoke Weldment, Left Wheel (Serial Numbers ) W8 Yoke Weldment, Right Wheel (Serial Numbers Present) 089 Yoke Weldment, Right Wheel (Serial Numbers ) A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled (See Section. for wheel components). P9 Spacer, / OD x / ID 5 F050-0 Bolt, /-0 x / Hex Head Grade 5 F Nut, /-0 Nylon Lock T0 Spacer, / OD x / ID x Thick 8 P09 Bushing, Flanged Bronze 9 T0 Spacer, / OD x / ID x / Thick 0 P8 Washer, Wave P0 Pin, /8 x 5/ Clevis P Ring, Pull -8 5ER/masterdoc050 Wheels

43 Wheels Left & Right Swivel Wheel Assemblies ER00- FIG. - Wheels 5ER/masterdoc050-9

44 Wheels Left & Right Fixed Wheel Assemblies.5 Left & Right Fixed Wheel Assemblies Ref. No. Part No. Part Description W85 Yoke Weldment, 9 Left Fixed W8 Yoke Weldment, 9 Fixed Right A50 Wheel/Hub Assembly, 9 x.5, Foam-Filled T Spacer,. OD x.5 ID x.9 5 P9 Spacer,. OD x.9 ID x.5 F0500- Nut, /-0 Half Nylon Lock T0 Spacer, / OD x / ID x Thick 8 T0 Spacer, / OD x / ID x / Thick 9 P09 Bushing, Flanged Bronze 0 P8 Washer, Wave P0 Pin, /8 x 5/ Clevis P Ring, Pull. -0 5ER/masterdoc050 Wheels

45 Wheels Left & Right Fixed Wheel Assemblies ER00- FIG. -5 Wheels 5ER/masterdoc050 -

46 Wheels 9 x.5 Wheel Assemblies, Foam-Filled. 9 x.5 Wheel Assemblies, Foam-Filled REF PART # DESCRIPTION QTY. A50 Wheel/Hub Assembly, 9 x.5 Foam-Filled F0500- Nut, 5/- Taper Lug Deleted A9 Wheel Assy, Rim and Tire (Includes items, 5, and ) F0500- Nut, /-0 Free Hex 5 F050- Washer, / Split Lock F Bolt, /-0x/ HH Gr5 08 Wheel Hub and Bearing Assembly, (Includes items 8, 9, and 0) 8 P9 Bearing Seal, Trb, /8 ID 9 P9 Bearing, Tapered Roller, / ID 0 P9 Wheel Hub Assembly, Demountable (Includes items,,, and 5 P0 Bearing Race Insert, /" Trb Wheel Hub Assembly, Demountable P9 Fitting, /-8 5º Grease 0855 Spacer, / Wheel Bearing 5 F0500- Stud, 5/-x/ Press In Zinc Not sold seperately. Wheels are shipped unlubricated from the factory. Insure proper lubrication, bearing preloading, and torque specifications are met. Use Loctite on all bolts. (See Technical Bulletin SB-09) For item, it is possible to have a 5/-8 nut. Please check the hub studs before ordering new nuts. If the studs are 8 pitch, order nuts F0500- and lock washers F ER/masterdoc050 Wheels

47 Wheels 9 x.5 Wheel Assemblies, Foam-Filled Torque Lug Nut to 0 in-lbs Torque Hub Nut to 5 in-lbs Rim Assembly A9 Hub Assembly 08 Wheels 5ER/masterdoc050 -

48 Wheels 9 x.5 Wheel Assemblies, Pneumatic & Foam-Filled - 5ER/masterdoc050 Wheels

49 Wheels 9 x.5 Wheel Assemblies, Pneumatic & Foam-Filled Wheels 5ER/masterdoc050-5

50 TERMS AND CONDITIONS OF SALE GENERAL - No addition to or modification of any of the Terms and Conditions of Sales as they appear herein shall be binding upon Bondioli & Pavesi, In (hereinafter referred to as Bondioli & Pavesi ) unless signed in writing by a duly authorized representative of Bondioli & Pavesi in Ashland, Virginia. Typographical and clerical errors in quotations, orders, and acknowledgments are subject to correction. TERMS - Bondioli & terms Pavesi for the purchase of any material are Net 0 Days from the date of t he invoice or an interest charge of.5% per month will be made. Shipments will cease when the account is considered past due. In event of referral to an attorney for collection, attorney fees will be due. All Bondioli & customers will Pavesi be entitled to a credit limit consistent with approved credit history. This limit may be changed at the discretion of Bondioli & Pavesi. PRICES - Prices and discounts in any Bondioli & Pavesi publication are subject to change without prior notification. Prices given by te lephone or by a representative are given only as indications and are not obligations unless confirmed by Bondioli & Pavesi in writting. Catalog prices are based on price published in the current price list All written quotations are valid until the listed expiration date, but PRODUCTS MUST BE SHIPPED BY THAT DATE. ORDERS - All purchase orders must be presented in writing on the commercial letterhead of the purchaser. If not previously furnished, credit information must be submitted to Bondioli & Pavesi on its form. All purchase orders are received subject to acceptance by an authorized representative of Bondioli & Pavesi in Ashland, Virginia. Modifications or cancellations will only be accepted if in writing and received in Ashland, Virginia within eight weeks prior to the scheduled shipment date on any special orders or within 8 hours of the date of receipt in Ashland, Virginia of the original order for stock items. Thereafter, Bondioli & Pavesi reserves the right to invoice the cost ensuing from the partial or total execution of the original order. PATENT - Bondioli & will defend Pavesi any proceeding brought against Purchaser based on a claim that any product furnished by Bondioli & infringes on any Pavesi patent in the United States, if Bondioli & is notified Pavesi promptly in writing and given authority, information assistance for the defense of same, and Bondioli & Pavesi shall pay all damages and costs awarded therein against Purchaser. In case the product is held to infringe and the use of the product is enjoined, Bondioli & Pavesi will either procure f or Purchaser the right to continue using the product or replace it with non-infringing products or modify it so it becomes noninfringing, or remove the product and refund the purchase price and the installation thereof. Bondioli & shall Pavesi not be liable for any proceedings brought claiming that the Purchaser's equipment using a Bondioli & Pavesi component infringes on any patent of the United States. This is the entire liability of Bondioli & Pavesi for patent infringement by its products. The pro ceeding paragraph shall not apply to any products manufactured to Purchaser's design. As to such products, Bondioli & Pavesi assumes no liability whatsoever for patent infringement. PROPRIETARY AND PATENT RIGHTS OF BONDIOLI & PAVESI - Goods of Bondioli & Pavesi include design, engineering and planning of Bondioli & Pavesi which is proprietary and sometimes patented. This sale does not waive these proprietary and/or patent rights and the Purchaser agrees not to reproduce such goods without the exp ress written authorization of Bondioli & Pavesi. LIMITATION OF LIABILITY - Bondioli & Pavesi's liability on any claim of any kind, including negligence, for any loss damage arising out of, connected with, or resulting from an order, or from the performance or breach thereof, or from the design, manufacture, sale, delivery, operation or use of its product is limited to the difference at the time and place of shipment between the value of the goods accepted and value they would have had if they had been warranted. No claim shall be made for proximate damages of a different amount, nor may any recovery be had for accidental or consequential damages, whether direct to indirect DELIVERY - Delivery dates are established on the day on which orders are received in Ashland, Virginia by Bondioli & Delivery Pavesi. dates given in the acceptance of an order are approximate. Bondioli & Pavesi will not be liable for delays in delivery or performance, due to causes beyond its reasonable control. In the event of delays, the date of delivery or performance shall be extended for a period equal to the time lost by the reason of such delays. A minimum order of $50.00 is required on all service parts delivered. INDEMNIFICATION - Purchaser agrees to indemnity Bondioli & Pavesi for any costs, attorney s fees, losses or damages resulting from claims brought against it by Purchasers' customers or employees arising out of Purchasers' acts, representations or omissions. TAXES - Purchaser shall pay all sales, use, excise, or similar taxes charged to Bondioli & Pavesi arising out of the sale. TRANSPORTATION - All phone are F.O.B. Ashland, Virginia, disregarding the order value total, unless otherwise indicated on the face of the invoice, and goods are transported at the risk and peril of Purchaser. If special methods of transportation or routing are desired, such must be included in the written purchase order. INSPECTION AND RECEIPT - Purchaser must inspect the goods on arrival. No complaint for errors in it ems delivered or shortages will be taken into account if it is not received in Ashland, Virginia within one week after the delivery date to Purchaser. Packing lists must accompany all claims for shortages. Bondioli & Pavesi must approve in writing in advance before any return of material for credit TITLE - Title to the products of Bondioli & Pavesi shall remain with Bondioli & until Pavesi payment is made in full by Purchaser. Such reservation of title is for purposes of securing the purchase price and shall not relieve Purchaser of the duty to inspect the products upon receipt to notify Bondioli & Pavesi of any deficiencies or defects, and to exercise due care in the use, installation, operation, and maintenance of the products when on t he premises of the Purchaser or under the control of the Purchaser. Such reservation of title shall not alter responsibility between Bondioli & Pavesi and Purchaser for shipping or for goods in transit GOVERNING LAW - The sale and purchase of products from Bondioli & Pavesi including terms and conditions hereof, shall be governed by the law of the Commonwealth of Virginia. LIMITED WARRANTY - Bondioli & warrants Pavesi to Purchaser that the products purchased will be of merchantable quality and free from defects of materal and workmanship and will be of the kind and quality desi gnated or specified in the contract This warranty shall only apply to defects appearing within one () year from the date of the Bondioli & Pavesi invoice. Bondioli & Pavesi will not be liable for any modifications to its product by Purchaser or by Warehouse Distributor. Satisfaction of this warranty will be limited to (a) replacement or (b) repair or modification of the product by Bondioli & Pavesi, or (c) issuance of a credit for the defective products delivered under the invoice involved. The se options are at the discretion of Bondioli & Pavesi. No credit will be issued for related parts failure or labor charges. If option (a) or (b) is chosen, goods returned to customer will be freight prepaid. Rights under this warranty are available only it Bondioli & Pavesi is promptly notified, in writing, of the alleged defect and Bondioli & Pavesi's examination of the product discloses that the defect was not due to misuse, improper installation, accident or unusual degradation of the goods d ue to physical environments of an unusual nature. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THIS PROVISION. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESSED, IMPLIED OR STATUTORY, INCLUDING IMPLIED WARRANTIES OR MERCHANTABILITY OF FITNESS. PURCHASER ACKNOWLEDGES THAT HE IS NOT RELYING ON THE SELLER'S SKILL OR JUDGMENT TO SELECT OR FURNISH GOODS SUITABLE FOR ANY PARTICULAR PURPOSE. THIS WARRANTY EXTENDS ONLY TO THE PURCHASER FROM BONDIOLI & PAVESI. BONDIOLI & PAVESI WILL NOT BE RESPONSIBLE FOR CONSEQUENTIAL DAMAGE OF ANY KIND. TECHNICAL IMPROVEMENTS - Bondioli & Pavesi reserves the right to modify the items shown in its catalog without prior notice an d reserves the right to substitute the modified product line 'unless the purchase order states "No substitutions". RESOLUTION OF DISPUTES - Any disputes arising out of the sale or use of the goods shall be resolved by arbitration, unless otherwise agreed in the City of Richmond, or the Counties of Henrico or Hanover, Virginia, under the Commercial Rules of the American Arbitration Association. Any arbitration award shall be enforced in the Circuit Court of Hanover County, or in the United States District Court for the Eastern District of Virginia, Richmond Division. In any dispute submitted to arbitration and enforcement Any dispute resulting in court proceedings shall be tried by the court, and the parties waive any right to a jury trial for such. Collections for overdue accounts may be directly brought by Bondioli & Pavesi in the Courts of Hanover County, Virginia or the United States District Court for the Eastern District of Virginia, Richmond Division. Purchaser agrees to such juris diction and venue. WAIVER - The waiver by Bondioli & Pavesi or by Purchaser of any breach or rights arising out of the sale shall not be considered a waiver of any further breach or future similar rights. PREVAILING TERMS - These terms and conditions herein shall prevail over any other terms and conditions contained in any document submitted by the Purchaser unless expressly agreed to in writing signed by Bondioli & Pavesi.

Lastec Parts. Parts Lists And Illustrations 325E-98. Master Parts Manual. Manual Part Number: Man-325E98

Lastec Parts. Parts Lists And Illustrations 325E-98. Master Parts Manual. Manual Part Number: Man-325E98 Lastec Parts 3E-98 Master Parts Manual Manual Part Number: Man-3E98 Parts Lists And Illustrations March 998 Table of Contents Section-Page SECTION GENERAL INFORMATION -. How To Use The Parts List... -.