BULLETIN B FEBRUARY DeZURIK PEF 100% PORT ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS

Transcription

1 BULLETIN.60-B FEBRUARY 0 DeZURIK PEF 00% PORT ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS

2 Materials of Construction Item Description Material A Body Cast Iron, ASTM A6, Class B A Body Bearing 36L Stainless Steel. Sintered Stainless Steel Metal, (Ductile Iron, ASTM A536, Grade ) A3 Plug CR Chloroprene NBR Acrylonitrile-Butadiene A4 Grit Excluder PTFE A5 O-Ring Non-asbestos filler in Styrene-Butadiene Rubber binder (NBR) A6 Bonnet Cast Iron, ASTM A6, Class B A7 Bonnet Bearing 36L Stainless Steel, Sintered Stainless Steel Carbon Steel, Class 8.8, Zinc Plated A8 Bonnet Screws Stainless Steel, Grade A, (8-8) Stainless Steel, Grade A4, (36) A9 Packing NBR Acrylonitrile-Butadiene, V-Type A0 Key Steel, ASTM A08 A Gland Cast Iron, ASTM A6, Class B Carbon Steel, Class 8.8, Zinc Plated A Gland Stud Stainless Steel, Grade A, (8-8) Stainless Steel, Grade A4, (36) Carbon Steel, Zinc Plated A3 Nut Stainless Steel, A, (8-8) Stainless Steel, A4, (36) A4 Caution Tag Stainless Steel A5 Pipe Plug (optional) Galvanized Carbon Steel A6 O-Ring Non-asbestos filler in Styrene-Butadiene Rubber binder (NBR) A7 Journal Cover Cast Iron, ASTM A6, Class B Carbon Steel, Class 8.8, Zinc Plated A8 Screw Stainless Steel, Grade A, (8-8) Stainless Steel, Grade A4, (36) A Friction Cone Ryton Galvanized Carbon Steel A3 Pipe Plug (optional) 36 Stainless Steel A8 A6 Flanged Construction 3" (80mm) and Larger A0 A3 A A A9 A4 A7 A5 A4 A3 A4 A A A A3 A A5 A A9 A6 A7 A8 A3 Applicable Standards DeZURIK PEF 00% Port Eccentric Plug s are designed and/or tested to meet the following standards: AWWA C57-05 Resilient-Seated Cast-Iron Eccentric Plug. ANSI flange drilling conforms to ANSI B6., Class 5 and ANSI B6.5, Class. Mechanical-joint end connections conform to ANSI/AWWA C/A.. MSS-SP9 guidelines for manual operation of valves. Metric 0 bar flange drilling conforms to the NP 0 requirements of International Standard ISO 084, to the 0 bar requirements of British Standard 44, and to the NP 0 requirements of German Standard DIN 53. Metric 6 bar flange drilling conforms to the NP 6 reguirements of International Standard ISO 084, to the 6 bar requirements of British Standard 44, and to the NP 6 requirements of German Standard DIN 533. British Table D flange drilling and Table E flange drilling conform to British Standard BS 0. Japanese 0 bar flange drilling conforms to Japanese Industrial Standard JIS B 003. * Patent Pending 0 DeZURIK

3 Selection Cv/Kv Values Cv* Kv* 3" mm 760 4" 60 00mm & mm mm 680 0" 4540 mm 3930 " mm 54 4" 60 3mm " mm mm " mm " mm " 650 0mm " mm 800 * Cv = Flow in GPM of water at psi pressure drop. * Kv = Flow in m 3 /hr. of water at 00 kpa pressure drop. Basic Weights Flanged lbs/kg M.J. lbs/kg 3" mm 6 7 4" mm " 0 5mm 54 N/A 6" 0 38 mm mm " mm 0 34 " mm " mm " mm mm " 389 0mm " mm " mm " mm Note: Basic is a fully assembled bare shaft valve Pressure Ratings C.W.P. Non-Shock Working Pressure Ratings Material 3 " (80 300mm) 4 36" (3 900mm) Cast Iron psi psi (ASTM A6-Grade B) kpa 035 kpa * Cast Iron conforms to ANSI B6. Class 5 Hydrostatic Test. Temperature Rating 80 F continuous max temp rating. Flow Characteristic Percentage of Maximum Flow Percent of Maximum Flow 00% 90% 80% 70% 60% % 40% 30% 0% 0% ( 3" - 0") (4" - 36" ) 0% 0 00% 0% 0% 30% 40% % 60% 70% 80% 90% 00% Percent Open 3

4 Installation Instructions Clean Liquids and Clean Gases The proper installation of a DeZURIK PEF 00% Eccentric Plug in clean liquids and gases applications is with the higher pressure against the end opposite the seat. Liquids with Suspended Solids and Dirty Gases The proper installation of a DeZURIK PEF 00% Eccentric Plug in suspended solids applications such as raw sewage is critical to prevent solids from packing into the valve body, restricting the plug movement. This can be accomplished by installing the valve with the flow against the face of the plug in the closed position and the valve on its side with the plug rotating to the top of the pipeline in the open position. For pump isolation service, install the discharge valve with the seat downstream from the pump and the plug rotating to the top of the pipeline in the open position. 4

5 Sizing Flow Charts Fully Open Fully Open - Metric Flow Through (GPM) Flow (m 3 /hr) Pressure Drop (psi) Pressure Drop (kpa) 5

6 Ordering To order, simply complete the valve order code from information shown. An ordering example is shown for your reference. Style Give valve style code as follows: PEF = 00% Port Eccentric Plug Packing Give packing code as follows: NBR = Acrylonitrile-Butadiene V-Type Multiple V-Ring -0 to 80ºF (-9 to 83ºC) Give valve size code as follows: 3 = 3" (80mm) 4 = 4" (3mm) 4 = 4" (00mm) 6 = 6" (400mm) 5 = 5" (5mm) 8 = (4mm) 6 = 6" (mm) 0 = 0" (0mm) 8 = (00mm) 4 = 4" (600mm) 0 = 0" (mm) 30 = 30" (0mm) = " (300mm) 36 = 36" (900mm) Plug Facing Give plug facing code as follows: Standard facings: CR = Chloroprene (RS 6/7) -0 to 80ºF (-9 to 83ºC) CIIR = Chloro-Isobutene Isoprene (RS55/56) -0 to ºF (-9 to ºC) NBR = Acrylonitrile-Butadiene (RS4/5) -0 to 80ºF (-9 to 83ºC) End Connection Give end connection code as follows: F = Flanged, ANSI Class 5/ F0 = Flanged, ANSI Class, DIN 0 or B544/0 F6 = Flanged, ANSI Class, DIN 6 or B544/6 FD = Flanged, ANSI Class, BS Table D FE = Flanged, ANSI Class, BS Table E FJ = Flanged, ANSI Class, JIS Drilling MJ = Mechanical Joint (Not Available on 5") Options DST = Dry Seat Test PD = /4" Pipe Tap Downstream (See note) PU = /4" Pipe Tap Upstream (See note) PDU = /4" Pipe Tap Downstream and Upstream GR = Grease Fittings in Body & Bonnet (Flanged s only) not available with ENK extension = Optional coating Note: If both PD and PU are required, a six digit modifier must be used. PEF,8,F,CI,NBR,CR*GS-6A-HD8 Body Material Give body material code as follows: CI = Cast Iron Note: The limiting factor in valve selection is the lowest temperature limit of the packing or seat. 6

7 Manual Actuators Pressure Ratings Direct shutoff pressure differentials for nut or lever actuated valves must not exceed the limits shown below. Reverse shutoff differentials must not exceed 5 psi (70 kpa). If valves must seal higher reverse pressure, use gear actuators. Gear or powered actuators are recommended on 6" (mm) and larger valves as well as on applications where pipeline velocities are high and where sudden valve closure may cause water hammer. Maximum Shutoff Pressure Differentials Nitrile-Butadiene (Buna V) NBR Packing 3 & 4" 5 psi 00mm kpa 5 00 psi 00mm kpa Nut (NT) Furnished as standard on 3- (80-00mm) valves. Must be ordered to use VB, ENLVA, EF, LVA, CHA, LVF, and WRT. To order, add code NT to basic valve code. PEF,4,F,CI,NBR,CR*NT Adjustable Memory Stop All 3 (80-00mm) lever actuated valves are furnished with an adjustable, open position memory stop as standard. Adjustment of the stop to the desired open position allows the valve to be closed and reopened to the same throttling position. Lever (LVA) For use with NT actuators on 3- (80-00mm) valves. Lever must be ordered separately. Order Code ACC*LVA-3 ACC*LVA-4 ACC*LVA-5 ACC*LVA-6 ACC*LVA-8 ACC*LVA-4 3" (80mm) 4" (00mm) 5" (5mm) 6" (mm) (00mm) Stainless Steel Bolting Specify bolting requirements by giving code SB8 for 8-8 Stainless Steel or SB6 for 36 Stainless Steel. PEF,8,FI,CI,NBR,CR*GS-6A-HD8,SB6 Chain Handle (CHA) For use on 3- (80-00mm) valves with NT Nut. Chain Handle must be ordered separately by giving code ACC*CHA followed by a dash and valve size. Order Code ACC*CHA-3 ACC*CHA-4 ACC*CHA-5 ACC*CHA-6 ACC*CHA-8 ACC*CHA-4 3" (80mm) 4" (00mm) 5" (5mm) 6" (mm) (00mm) Chain for Chain Handle (CN) Order as a separate item by giving code per chart. Specify number of feet required and number of pieces. Order Code Description ACC*CN0 3-36" (80-900mm) Standard 3/6" Coil ACC*CN " (80-900mm) Galvanized 3/6" Coil ACC*CN " (80-900mm) 36 Stainless Steel 3/6" Coil ACC*CN0 Chain piece 0 feet long. 7

8 Manual Actuators The G-Series and MG manual actuators construction are totally enclosed and sealed, protecting moving parts from damage or corrosion. Continual lubrication is not required for operational ease. Heavy duty, corrosion-resistant actuator bearings provide lasting, easy valve operation and overall reliability. Rugged actuator castings, gears and shafts also add to reliability by assuring permanent alignment of moving parts for smooth operation. To order, add the appropriate actuator code from the sizing tables to the valve order code. For buried service valves, substitute GS with GB and MG with MGB. If " (mm) nut is required, see page. Direct Pressure, Resilient Plug, Metal Seat Handwheel Order Code Chainwheel Order Code Max. Shutoff Pressure Differential psi/kpa Handwheel Order Code Chainwheel Order Code Max. Shutoff Pressure Differential psi/kpa 3" 80mm 4" 00mm 5 & mm 00mm 0" mm GS-6A-HD8 GS-6A-HD8 GS-6A-HD8 GS-6A-HD8 GS-6A-HD8 GS-6A-HD GS-A-HD GS-6A-CW GS-A-CW 5 30" 0mm 36" 900mm MG-MJ-HD4 MG-MJ-HD30* MG-ML60-HD4 MG-ML60-HD4 MG-ML60-HD30 MG-MJ-CW4 MG-MJ-CW30* MG-ML60-CW4 MG-ML60-CW4 MG-ML60-CW30 00 Direct Pressure, Weatherproof Nut Actuator " 300mm GS-6A-HD GS-A-HD GS-6A-CW GS-A-CW 5 Order Code Max. Shutoff Pressure Differential psi/kpa 4" 3mm 6" 400mm 4mm 0" 0mm 4" 600mm GS-A-HD6 GS-A-HD GS-A-HD6 GS-A-HD0 GS-A-HD6 GS-A-HD0 GS-A-HD4* GS-A-HD0 GS-A-HD4* GS-A-HD30 MG-MJ-HD0 GS-A-HD4* GS-A-HD30* MG-MJ-HD4 MG-MJ-HD MG-MJ-CW4 GS-A-CW0 GS-A-CW GS-A-CW0 GS-A-CW0 GS-A-CW0 GS-A-CW0 GS-A-CW4 GS-A-CW0 GS-A-CW4 GS-A-CW30 MG-MJ-CW0 GS-A-CW4 GS-A-CW30* MG-MJ-CW4 MG-MJ-CW MG-MJ-CW " 80mm 4" 00mm 5 & mm 00mm 0" mm " 300mm 4" 3mm 6" 400mm 4mm 0" 0mm 4" 600mm 30" 0mm 36" 900mm GS-6A-N GS-6A-N GS-6A-N GS-6A-N GS-6A-N GS-6A-N GS-A-N GS-A-N GS-A-N MG-MJ-N GS-A-N MG-MJ-N MG-MJ-N MG-MJ-N MG-ML60-N MG-ML60-N *Mounting positions 90 & 70 not available PEF,6,F,CI,NBR,CR*GB-6A-N PEF,4,F,CI,NBR,CR*GS-A-N

9 Reverse Pressure, Resilient Plug, Metal Seat Reverse Pressure, Weatherproof Nut Actuator Handwheel Order Code Chainwheel Order Code Max. Shutoff Pressure Differential psi/kpa Order Code Max. Shutoff Pressure Differential psi/kpa 3" 80mm GS-6A-HD8 3" 80mm GS-6A-N 4" 00mm GS-6A-HD8 4" 00mm GS-6A-N 5 & mm 00mm 0" mm " 300mm 4" 3mm GS-6A-HD8 GS-6A-HD8 GS-6A-HD GS-6A-HD GS-A-HD GS-A-HD6 GS-6A-HD GS-A-HD GS-A-HD6 GS-A-HD0 GS-A-HD GS-A-HD6 GS-A-HD0 GS-A-HD4* GS-6A-CW GS-6A-CW GS-A-CW GS-A-CW0 GS-6A-CW GS-A-CW GS-A-CW0 GS-A-CW0 GS-A-CW GS-A-CW0 GS-A-CW0 GS-A-CW4* & mm 00mm 0" mm " 300mm 4" 3mm 6" 400mm 4mm 0" 0mm 4" 600mm 30" 0mm 36" 900mm GS-6A-N GS-6A-N GS-6A-N GS-6A-N GS-A-N GS-A-N GS-A-N MG-MJ-N GS-A-N MG-MJ-N MG-MJ-N MG-MJ-N MG-ML60-N MG-ML60-N " 400mm GS-A-HD6 GS-A-HD0 GS-A-HD4 GS-A-CW0 GS-A-CW0 GS-A-CW4* PEF,4,F,CI,NBR,CR*MG-MJ-N PEF,36,F,CI,NBR,CR*MGB-MJ60-N MG-MJ-HD MG-MJ-CW GS-A-HD0 GS-A-CW mm GS-A-HD4 GS-A-HD30 GS-A-CW4 GS-A-CW30* MG-MJ-HD4 MG-MJ-CW4 0" 0mm GS-A-HD30* MG-MJ-HD4 GS-A-CW30* MG-MJ-CW4 0 4" 600mm MG-MJ-HD MG-MJ-HD4 MG-MJ-CW MG-MJ-CW4 00 MG-MJ-HD30* MG-MJ-CW30* 0 30" 0mm MG-MJ-HD4 MG-MJ-HD30* MG-MJ-CW4 MG-MJ-CW30* MG-ML60-HD4 MG-ML60-CW4 36" 900mm MG-ML60-HD4 MG-ML60-HD30 MG-ML60-CW4 MG-ML60-CW30 00 *Mounting positions 90 & 70 not available 9

10 Accessories-Manual Actuators EFA Extension for Nut Actuated s For use on 3 (80 00mm) valves. Includes extension pipe, bearing plate and couplings. s for use with EFA extensions must be ordered with NT actuators. Order Extension Assembly as a separate item. Specify length from centerline of valve to bottom of bearing plate. When ordering for use with FS0 Floor Stand, give dimension from centerline of valve to base of floor stand. ACC*EF-4 Centerline of valve to bottom of bearing plate 0" (795mm). FSDIR and FSDIU Floor Stand for Gear Actuated s For use on 3 36" (80 900mm) handwheel actuated valves. Includes floor stand, couplings, extension rod, and handwheel mounted on floor stand, with dial position indicator. Order floor stand by adding FSDIR or FSDIU to the valve actuator code. EF FB Floor Box for Nut Actuated s Includes floor box and cover only. Can be used with valves having operating nut mounted on the valve or extended with top of nut " (mm) from top of floor box. All valves for use with floor boxes are Tee Wrench actuated (order separately). Order extended operating nuts (ENLVA) separately. Floor box requires NT actuators (order seperately). Order floor boxes separately. Specify ACC*FB and depth of floor box in " (5mm) increments from 6 ( 455mm). Standard depth is 6" (mm). ACC*FB6 ENLV ENLVA Extended Nut for Nut Actuated s For use on 3 (80 00mm) nut actuated valves. Includes operating nut, couplings and pipe. s for use with ENLVA Extended Nut must be ordered with NT actuators. All valves for use with ENLVA are Tee Wrench activated (order seperately). Order as a separate item by giving ACC*ENLVA followed by a dash and valve size. Give required length from centerline of valve to top of nut. Note dimensions in table. FB PEF,6,F,NBR,CR*,GS-6A-HD,FSDIR Minimum Dimension C/L of to Top of Nut 3" 6.9" 80mm 4mm 4" 6.69" 00mm 44mm 5 6" 9." 5 mm 486mm.3 000mm 570mm FSDIR FSDIU ACC*ENLVA-8 Centerline of valve to top of valve nut 6" (300mm). 0 Centerline of valve to base of floor stand 90" (400mm). FS0 Floor Stand for Nut Actuated s For use on 3 (80 00mm) nut actuated valves. Includes floor stand only. For extension pipe and fittings, order EFA Extension Assembly. Lever actuated valves for use with EFA Extension and FS0 Floor Stand must be ordered NT actuators. Order floor stands as a separate item. ACC*FS0 FS0

11 ENGS Extended " (mm) Nut for Gear Actuated s The ENGS is for use on 3 36" (80 900mm) PEF Eccentric Plug s with G-Series and MG Handwheel Manual Actuator. Includes couplings, extension rod and " (mm) square nut. If used with valve box, top of nut must be 6" (mm) below grade. If used with floor box, top of nut must be " (mm) below floor surface. Handwheels are not furnished on actuators ordered with ENGS. Order by adding ENGS to the valve actuator code. Specify required length from centerline of valve to top of nut as second line information. PEF,6,F,CI,NBR,CR*GB-6A-N,ENGS Centerline of valve to top of nut 7" (830mm). ENGS ENK Neck Extension for G-Series Actuators s for buried or submerged service can be furnished with handwheel or cylinder actuators extended above the ground. Furnish service information for recommendations. " (mm) Nut on Gear Actuators The nut replaces the handwheel normally supplied. A " (mm) nut is required for use with valve box (VB) or floor box (FB). To order replace the handwheel code with N. PEF,6,F,CI,NBR,CR*GB-6A-N ENK WRT Tee Wrench For use on 3 (80 00mm) nut or gear actuated valves with " (mm) nut. s for Tee Wrench operation must be ordered with NT actuator. Contact factory to order Tee Wrenches. Accessories Manual Actuators VB Box for Nut Actuated s boxes for use on 3 (80 00mm) valves require a nut (NT) or extended nut (ENLV) type actuator. boxes for use on 3 36" (80 900mm) valves with a gear actuator (GB) require a " (mm) Nut (N) or extended " (mm) Nut (ENGS) actuator. Extended nut must be 6" (mm) from the top of the valve box. Contact factory to order. VB

12 Cylinder Actuators G-Series cylinder actuators feature a rack and pinion design for larger size rotary valves where constant torque capability throughout the stroke is required. It is engineered for high flow, high cycle applications. The G-Series line of actuators provides long service life and features a rugged, heavy cast gear sector. The cast iron actuator housing is sealed to prevent the entry of dirt, moisture and corrosive contaminants. The G-Series actuator also features adjustable position stops, rugged cylinder construction and corrosion-resistant bearings. Double-Acting To order double-acting cylinder actuators for PEF Eccentric Plug s, add the order code from the proper table to the valve order code. Actuators for 3 36" (80 900mm) valves can be mounted at 90 degree increments clockwise from standard. Specify mounting positions other than standard as second line information. When using hydraulic supply media, specify type. Please note, valves for gas service must be furnished with gear or cylinder actuator. Direct Pressure, Resilient Plug, Metal Seat psi (kpa) Air Supply 3" 80mm 4" 00mm 5 & mm 00mm 0" mm Actuator Code GS-6A-PC4* GS-6A-PC4* GS-A-PC6 GS-A-PC6 GS-A-PC8 Maximum Shutoff psi kpa 5 00 " 300mm 4" 3mm 6" 400mm 4mm 0" 0mm 4" 600mm 30" 0mm 36" 900mm GS-A-PC8 GS-A-PC0 GS-A-PC8 GS-A-PC0 GS-A-PC0 GS-A-PC * PC4 Cylinder not recommended with positioner

13 Cylinder Actuators Direct Pressure, Resilient Plug, Metal Seat 80 psi (5 kpa) Air Supply Reverse Pressure, Resilient Plug, Metal Seat psi ( kpa) Air Supply 3" 80mm 4" 00mm 5 & mm 00mm 0" mm " 300mm 4" 3mm 6" 400mm Actuator Code GS-6A-PC4* GS-6A-PC4* GS-6A-PC4* GS-A-PC6 GS-A-PC8 GS-A-PC6 GS-A-PC8 GS-A-PC8 GS-A-PC0 GS-A-PC8 GS-A-PC0 GS-A-PC8 Maximum Shutoff 80 psi 5 kpa " 80mm 4" 00mm 5 & mm 00mm 0" mm " 300mm 4" 3mm 6" 400mm 4mm 0" 0mm 4" 600mm 30" 0mm 36" 900mm Actuator Code GS-6A-PC4* * GS-6A-PC4* GS-A-PC6 GS-A-PC8 GS-A-PC6 GS-A-PC8 GS-A-PC0 GS-A-PC8 GS-A-PC0 GS-A-PC8 GS-A-PC0 GS-A-PC0 Maximum Shutoff psi kpa mm GS-A-PC0 * PC4 Cylinder not recommended with positioner 0" 0mm GS-A-PC " 600mm 30" 0mm 36" 900mm * PC4 Cylinder not recommended with positioner 3

14 Cylinder Actuators Reverse Pressure, Resilient Plug, Metal Seat 80 psi (5 kpa) Air Supply 3" 80mm 4" 00mm 5 & mm 00mm Actuator Code GS-6A-PC4* GS-6A-PC4* GS-6A-PC4* Maximum Shutoff 80 psi 5 kpa 5 70 Spring-Return To order spring-return cylinder actuators, add the order code from the proper chart to the basic valve order code. Specify actuator action as second line information. Actuators can be mounted at 90 degree increments clockwise from standard. Specify mounting positions other than standard as second line information. Resilient Plug, Metal Seat, Direct Pressure or Reverse Pressure Less Than 5 psi (70 kpa) Spring-To-Close (Air-To-Open) 3 & 4" 80 & 00mm 5 & mm 00mm Order Code GS-6A-SC8 GS-6A-SC8 GS-A-SC0 Maximum Shutoff Pressure Differential Air Supply psi kpa " mm GS-A-PC6 GS-A-PC Spring-To-Open (Air-To-Close) 3 & 4" 80 & 00mm Order Code GS-6A-SC6-A Maximum Shutoff Pressure Differential Air Supply psi kpa " 300mm 4" 3mm GS-A-PC6 GS-A-PC8 GS-A-PC0 GS-A-PC8 GS-A-PC0 5 & mm 00mm 0" mm " 300mm GS-6A-SC6-A GS-6A-SC8-A GS-A-SC0-A GS-A-SC0-A GS-A-SC0-A GS-A-PC Note: Contact Application Engineering for actuator sizing when reverse pressures are greater than 5 psi (70 kpa). Furnish service conditions. 6" 400mm GS-A-PC0 00 PEF,6,F,CI,NBR,CR*GS-6A-SC8-A 4mm GS-A-PC " 0mm GS-A-PC " 600mm 30" 0mm 36" 900mm * PC4 Cylinder not recommended with positioner 4

15 Accessories Cylinder Actuators Positioners For use on all cylinder actuators. To order positioners, refer to bulletin Position Indicating Switches (SEH) For use on G-Series Actuators. To order switches, refer to bulletin & 4-Way Solenoid (3V & 4V) For use on cylinder actuators. To order solenoids, refer to bulletin Way Control (CV) For use on double-acting cylinder actuators. Order as a separate item by giving ACC* followed by appropriate 3-digit code from the table below. To order as part of a complete valve/actuator assembly, enter code from table below to the valve/actuator order code. Pneumatic Actuators NPT Order Code All s.5" 6.4mm Hydraulic Actuators NPT Order Code 3-.3" 80-00mm 9.5mm 0-36".5" -900mm 3mm ACC*CV0 (separate item) PEF,6,F,CI,NBR,CR*,CV0 CV0 CV0 CV03 Air Filter Regulator (AFR) For use on all pneumatic actuators. To order, refer to bulletin Filter/Strainer (FH/FP) Filter for pneumatic actuators, strainer for hydraulic actuators. Order as a separate item per table below (not mounted). Description Pneumatic Filter Hydraulic Strainer ACC*PCFP Order Code ACC*PCFP ACC*PCFH Electric Motors DeZURIK offers a variety of electric motor actuators on PEF Eccentric Plug valves. When ordering, please specify valve function, installation location, line fluid, maximum fluid temperature, pipe connection, line size, normal and maximum working pressure, normal and maximum wide open valve flow, and flow range desired if throttling or modulating control. 5

16 Dimensions Seat End of K K C C D (Diameter of Bolt Circle) Basic CI=Cast Iron B A B A Flanged CI 3" mm " mm & mm Inch Millimeter mm " mm " mm " mm " mm mm " mm " mm " mm " mm Nut Actuated s (NT) 3- (80-00mm) K 3" mm 03 4" mm & mm mm 395 Inch Millimeter A Mechanical Joint Flanged B Mechanical Joint C " (5mm) 8. 6 D (Flanged) 6" (mm) 9. 4 Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layout. 6

17 Dimensions HANDWHEEL 3-0" (80-0mm) GS-6A-HD_ & GS-A-HD_ HANDWHEEL 6-30" (400-0mm) MG-MJ-HD_ HANDWHEEL 30-36" (0-900mm) MG-ML60-HD_ "R" DIA "R" DIA "R" DIA GS-6A GS-A S S SHUT SHUT SHUT OPEN OPEN SHUT OPEN OPEN SHUT K L K L L K ACTUATOR MOUNTING POSITIONS STANDARD POSITION ACTUATOR MOUNTING POSITIONS STANDARD POSITION ACTUATOR MOUNTING POSITIONS STANDARD POSITION

18 Dimensions CHAINWHEEL 3-0" (80-0mm) GS-6A-CW_ & GS-A-CW_ CHAINWHEEL 6-30" (400-0mm) MG-MJ-CW_ CHAINWHEEL 30-36" (0-900mm) MG-ML60-CW_ "R" DIA GS-6A GS-A "R" DIA "R" DIA S S S K L K L L K ACTUATOR MOUNTING POSITIONS STANDARD POSITION ACTUATOR MOUNTING POSITIONS STANDARD POSITION ACTUATOR MOUNTING POSITIONS STANDARD POSITION

19 Dimensions NUT 3-0" (80-0mm) GS-6A-N_ & GS-A-N_.00 5 SQUARE NUT 6-30" (400-0mm) MG-MJ-N_ NUT 30-36" (0-900mm) MG-ML60-N_.00 5 SQUARE.00 SQUARE 5 S S S SHUT OPEN SHUT OPEN SHUT OPEN ACTUATOR MOUNTING POSITIONS STANDARD POSITION ACTUATOR MOUNTING POSITIONS STANDARD POSITION ACTUATOR MOUNTING POSITIONS STANDARD POSITION

20 CW Actuator Code K L R S HD HD CW HD CW HD CW 0 5 & mm 00mm 0" mm " 300mm 4" 3mm 4" 00mm 3" 80mm 6" 400mm GS-6A-HD8 (N) GS-6A-HD8 (N) GS-6A-HD8 (N) GS-6A-HD8 (N) GS-6A-HD GS-6A-CW GS-6A-HD8 (N) GS-6A-HD GS-6A-CW GS-A-HD (N) GS-A-CW GS-A-HD6 GS-A-CW0 GS-6A-HD (N) GS-6A-CW GS-A-HD (N) GS-A-CW GS-A-HD6 GS-A-HD0 GS-A-CW0 GS-A-HD (N) GS-A-CW GS-A-HD6 GS-A-HD0 GS-A-CW0 GS-A-HD4 GS-A-CW4 GS-A-HD6 (N) GS-A-HD0 GS-A-CW0 GS-A-HD4 GS-A-CW4 MG-MJ-HD(N) MG-MJ-CW " Nut (N) Dimensions Handwheel/Chainwheel/Nut Actuated s

21 Dimensions Handwheel/Chainwheel/Nut Actuated s (continued) Actuator K L R S Code HD CW HD CW HD CW HD CW 4mm 0" 0mm 4" 600mm 30" 0mm 36" 900mm GS-A-HD0 (N) GS-A-CW0 GS-A-HD4 GS-A-CW4 GS-A-HD30 GS-A-CW30 MG-MJ-HD0 (N) MG-MJ-CW0 MG-MJ-HD4 MG-MJ-CW4 GS-A-HD4 (N) GS-A-CW4 GS-A-HD30 GS-A-CW30 MG-MJ-HD4 (N) MG-MJ-CW4 MG-MJ-HD (N) MG-MJ-CW MG-MJ-HD4 MG-MJ-CW4 MG-MJ-HD30 MG-MJ-CW30 MG-MJ-HD4 (N) MG-MJ-CW4 MG-MJ-HD30 MG-MJ-CW30 MG-ML60-HD4 (N) MG-ML60-CW4 MG-ML60-HD4 (N) MG-ML60-CW4 MG-ML60-HD30 MG-ML60-CW " Nut (N) Inch Millimeter Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layout.

22 Dimensions Cylinder Actuated s Actuator Code K L M N R (NPT) P " 300mm 4" 3mm 6" 400mm 00mm 3" 80mm GS-6A-PC4 GS-6A-PC4 GS-6A-PC4 GS-A-PC6 GS-A-PC8 GS-A-PC6 GS-A-PC8 GS-A-PC6 GS-A-PC8 GS-A-PC0 GS-A-PC6 GS-A-PC8 GS-A-PC0 GS-A-PC6 GS-A-PC8 GS-A-PC0 GS-A-PC8 GS-A-PC0 GS-A-PC0 4" 00mm 5 & mm 0" mm 4mm 0" 0mm Inch Millimeter Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layout.

23 Dimensions Cylinder (Spring Return) Actuated s 3" 80mm 4" 00mm 5 & mm 00mm 0" mm " 300mm Actuator Code K L M N R (NPT) P GS-6A-SC6 GS-6A-SC8 GS-6A-SC6 GS-6A-SC8 GS-6A-SC6 GS-6A-SC8 GS-6A-SC6 GS-6A-SC8 GS-A-SC0 GS-A-SC0 GS-A-SC Inch Millimeter Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layout. 3

24 Dimensions Cylinder Actuated s P M R NPT OPEN GS-6A GS-A SHUT L 70º K Seat End of STANDARD POSITION SHOWN ON THIS DRAWING 80º 90º ACTUATOR MOUNTING POSITIONS AS VIEWED FROM TOP. DOTTED LINES SHOW OPTIONAL MOUNTING POSITIONS. Cylinder Actuated s (Spring Return) R NPT P M N OPEN DRAWING SHOWS ACTUATOR IN SPRING TO CLOSE POSITION. DASHED LINES SHOW ACTUATOR IN SPRING TO OPEN POSITION. SHUT GS-6A GS-A Sales and Service For information about our worldwide locations, approvals, certifications and local representative: Web Site: info@dezurik.com Riverside Ave. N. Sartell, Minnesota Phone: Fax: DeZURIK, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by DeZURIK, Inc. Certified drawings are available upon request. Printed in the U.S.A.