Mosherflo-ST, SU, and STX Self-Priming Pumps
|
|
- Bethany Thomasine Dalton
- 5 years ago
- Views:
Transcription
1 Mosherflo-ST, SU, and STX Self-Priming Pumps Physical Address: 9 FM 7 San Leon, TX 7739 Mailing Address: Drawer - A Dickinson, TX
2 ST & SU Parts List 6 6 ST & SU Rotating Assembly Casing 39 Sight Glass O-Ring, Sleeve * Impeller 3 Nut, Wear-plate Plug, Seal Cavity Drain 3 * Rotating Assembly 3 Lock-Washer, Wear-plate Plug 6 Shaft 3 Washer, Dish Flange 6 Plug, Bearing Hsg Drain 6 Bearing, IB 33 Lockwasher, OB Cover Shim Set, Impeller 8 Bearing, OB 3 Lockwasher, Hsg To Seal Plate Adjusting Screw, Rotating Assembly 6 Shaft Sleeve Washer, Impeller 96 O-Ring, Rotating Assembly 6 * Coupling Key 36 Washer, Suction Flange 98 * O-Ring, Seal Plate 7 * Lip Seal, IB 37 Bolt, Hsg To Case Plug, Casing Drain 9 Lip Seal, OB 39 Lock-Washer, Hsg to Case Plug, Suction Flange 8 Seal Plate 36 Retaining Ring, OB 88 * Gasket - Suction Flange 37 Bolt- Hsg To Seal Plate 3 89 * Seal Assembly With Sleeve 37 Clamp Bar Screw * O-Ring, Cover To Case 9 Discharge Flg-Std Flanged 373 Bolt, Dish Flange 6 * Gasket - Bearing Cap 9 Suction Flg-Std Flanged 37 Drive Screw, Warning Plate 6 * Gasket - Discharge Flange 9 Discharge Flg-Option Threaded 37 Bolt, Priming Cover 63 Gasket-Fill Cover (Primer Cover) 93 Suction Flg-Option Threaded 376 Bolt, Suction Flange 6 Cover, Priming With Warning Plate 99 Bearing Housing 377 Hand Nut, Front Cover 66 * Seal Plate Gasket Wear Plate 378 Bolt, OB Cover To Hsg 7 Warning Plate, Back Cover 37 Bearing Cap 379 Bolt, Impeller 7 Warning Plate, Priming Cover 6 Cover Plate Assembly 38 Handle, Back Cover 7 Lifting Eye 6 Fill Cover (Primer Cover) 38 Bolt, Handle To Back Cover 6 Check Valve Pin 38 Lock-Washer, Handle To Back Cover 66 Drive Screw - Warning Plate 7 Bushing Reduced - Vent (refer to 9) 67 Fill Cover 8 Air Vent (refer to 9) 68 Relief Valve 9 ed (7 + 8) 69 Clamp Bar, Priming Cover * INDICATES PARTS RECOMMENDED FOR STOCK
3 All Mosherflo ST,SU, and STX Series are replacement parts for the Gorman-Rupp Models T,U, and Super T Series. All pumps are hydrostatically pressure tested prior to shipment. All OEM names, numbers, descriptions, or likenesses are used for reference purposes only. It is not advertised that any part herein is a product of this OEM manufacturer. (U series, T series, and Super T Series, are all registered trademarks of Gorman-Rupp and are not associated with R.B. Mosher Company or its products) ST3 v STX3 Seal assembly OB Bearing IB Bearing Seal Plate Cover-plate Assemblies do not interchange T has two () hand lever point attachment, exterior adjustments, O-rings and inlet nozzle. Super T3 utilizes the external shimless cover-plate adjustment and ) /6 thick spacers on rotating assembly side. ST v STX Seal assembly Seal Plate Cover-plate Assemblies do not interchange T has two () hand lever point attachment, exterior adjustments, O-rings and inlet nozzle. Super T requires different OB and IB Bearings Super T utilizes the external cover-plate adjustment and ) /6 thick spacers on rotating assembly side ST6 v STX6 Cover-plate Assemblies do not interchange Super T6 requires a different shaft Seal Assembly is different Super T6 utilizes the 7/8 seal Super T6 requires different OB and IB Bearings Super T6 utilizes the external shimless cover-plate adjustment and ) /6 thick spacers on rotating assembly side ST8 v STX8 IB Bearings OB Bearings Seal plate RA s are interchangeable Cover-plate Assemblies are not interchangeable (tapered inlet nozzle, O-rings) Super T8 RA offers vent chamber and bearing protection Both utilize a cartridge seal Shaft is different (Super T has more lip seals) Seal Assembly is different Super T6 utilizes the 7/8 seal Super T8 utilizes the external shimless cover-plate adjustment and ) /6 thick spacers on rotating assembly side ST v STX IB Bearings OB Bearings Seal Impeller Super T RA offers vent chamber and bearing protection Only Super T utilizes a cartridge seal Shaft is different to wear plate adjustments are the same on both pumps adjust from RA side (no cover-plate adjustments) HEAD IN FEET FLOW IN CUBIC METERS / HOUR 3 6 FLOW IN GPM ST ST3 ST ST6 ST8 ST ST ST ST3 ST ST & SU Flow in GPM PERFORMANCE DATA SU3 SU SU6 3 ST6 3 6 ST ST ST 6 8 PUMP SIZE ST ST 3 ST ST 6 ST 8 ST RPM RANGE MAX SOLIDS PUMP SIZE SU 3 SU SU 6 RPM RANGE MAX SOLIDS HEAD IN METERS
4 ST - Dimensions G SU 3-6 Dimensions G D D A B C E A B C E K P F Q I J H Ø7. ( holes) (.69) K F I J H Ø7. ( holes) (.69) KEY SLOT DETAIL X SCALE P Q Ø R KEY SLOT DETAIL OF 8." (6 mm) THE COVER 7. Ø (/6 Ø) HOLES L M N O S OF 8." (6 mm) THE ROTATING ASSEMBLY A B C D E F G H I J K L M N O P Q R S ST N/A ST / ST ST ST ST.. N/A N/A ST For ST- dimensions, please inquire with Mosherflo Pump Division OF 8." (6 mm) THE COVER 7.Ø (/6Ø) HOLES L M N O Ø R S OF 8." (6 mm) THE ROTATING ASSEMBLY A B C D E F G H I J K L M N O P Q R S SU N/A SU SU
5 Additional Product Lines ANSI SERIES PUMPS All Mosherflo D and G Series are replacement parts for the Goulds and Durco ANSI series pumps. All pumps are hydrostatically pressure tested prior to shipment. All OEM names, numbers, descriptions, or likenesses are used for reference purposes only. It is not advertised that any part herein is a product of this OEM manufacturer. BASKET & Y-STRAINER We stock Cast Iron, Bronze, Carbon and Stainless Steel in a wide variety of sizes and pressures. These strainers are available in screwed, socketweld, or flanged ends. All products manufactured by Titan FCI are % hydrostatically tested in accordance with applicable ANSI, MSS standards and customer specifications. FILTER RENTALS R. B. Mosher Company offers your company a unique way of solving your filtration needs, without the high cost of purchasing. Whether your job requires a week, month, or a year-long filtration program, we can accommodate your needs. STEAM TRAPS Our inventory of steam traps is extensive, and we carry a variety of brands such as SPIRAX SARCO, ARMSTRONG, YARWAY, HOFFMAN, and others. Many are in stock and ready for immediate delivery. Featured Suppliers For more information on these products or any of our other products, give us a call and let one of our sales representatives assist you. If you are looking for a filter that is not on our list, call us anyway since we are always adding to our rental fleet. We look forward to hearing from you soon. -RBM Staff sales@rbmosherco.com
SELF-PRIMING, HIGH-EFFICIENCY PUMPS
SELF-PRIMING, HIGH-EFFICIENCY PUMPS GRpumps.com S U P E R U S E R I E S V A R I A T I O N S Super U Series pumps are available in 3", 4" and 6" discharge sizes. They are capable of handling spherical solids
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationPatent Pending. High Performance Self-Priming. Centrifugal Trash Pumps.
High Performance Self-Priming Centrifugal Trash Pumps www.gormanrupp.com A History of Innovation Gorman-Rupp has been revolutionizing the pumping industry since. Many of the innovations introduced by Gorman-Rupp
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationMarlow Series Prime Line
REPAIR PARTS RPRIMELINE Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS REPAIR PARTS Prime Line M2P M4P Pumps 27 50 49 27 54 1 8 10 6 17 4 67 5 24 37 63 53 51 2 7 46 2 PAGE 2 Prime Line 2" Pump
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationEBARA Self Priming Trash Pump. Type EFQT-EFQU
Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming
More informationPWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationSan Antonio, TX A Lookout Ridge. Smith Pump Co., Inc. Boerne, TX IH 10 West. Odessa Pumps
I. Hydromatic Pump Parts and Accessories (self-priming pumps) TOTAL A. PARTS-60 RP RDP * 6 ea. 41.33 32.19 1. O-Ring, #241-029-1 TOTAL 247.98 193.14 2 ea. 526.30 409.96 2. Check Valve Assy, #12612-061-5
More informationSELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS
SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS GRpumps.com S U P E R T S P E C I F I C A T I O N S SIZES MATERIALS OF CONSTRUCTION MAX. CAPACITY MAX. HEAD MAX. SOLIDS 3", 4", 6", 8", 10" (75 mm, 100 mm, 150
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps
Goulds Pumps Marlow Series Trash Hog II Self-Priming Solids Handling Centrifugal Pumps Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life TRASH HOG II A FULL RANGE OF PRODUCT
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationSelf-Priming Fiberglass Pumps
Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced
More informationHigh-Head, High Performance, Self-Priming Trash Pumps
MUNICIPAL INDUSTRIAL CONSTRUCTION / RENTAL AGRICULTURE High-Head, High Performance, Self-Priming Trash Pumps A History of Innovation Gorman-Rupp has been revolutionizing the pumping industry since 1933.
More informationTYPE PC Propeller Condensate Pumps
SHIPPENSBURG PUMP CO. INC. P.O. BOX 279, SHIPPENSBURG, PA 17257 PH 717-532-7321 FAX 717-532-7704 WWW.SHIPCOPUMPS.COM BULLETIN 103 Revised 8/17 TYPE PC Propeller Condensate Pumps with Cast Iron Receivers
More informationSelf-Priming, High Efficiency Pumps
SUPER U SERIES Self-Priming, High Efficiency Pumps A HISTORY OF INNOVATION Gorman-Rupp has been revolutionizing the pumping industry since 1933. Many of the innovations introduced by Gorman-Rupp over the
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationProduct Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
More informationEQUIPMENT REPAIR REPORT
EQUIPMENT REPAIR REPORT Date: April, 2010 Page 1 of 7 Customer: Our Reference: Sales Order #5000003764 Ref: 071459 Your Reference: Pump # 2 Circulating Tank Subject: Gorman Rupp Model T3A60S-B/F Attention:
More informationBSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationWMDA Series WMDA. Seal-less Mag-Drive Pumps. MAG-DRIVE ANSI-B73.1 ISO-2858 or API-685 CENTRIFUGAL PUMPS
Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists WORKING LIMITS QMAX = 1800 USGPM @ 3500RPM; 350 cm/h @ 2900 RPM HMAX = 700 ft @ 3500RPM; 150 m @ 2900RPM T = -212 F (-100 C) up to 662 F (350
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationTrash Hog II Self Priming Solids Handling Centrifugal Pumps
Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationPWA-IL B73.2 IN-LINE
PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationDischarge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationMercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 23 22 13 STEAM AND CONDENSATE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationPIPELINE INJECTION PRODUCTS
PIPELINE INJECTION PRODUCTS DURABLE & RELIABLE SOLUTIONS PIPELINE INJECTION PUMP GP-10 & GP-1 SERIES Flows up to: 210 GPM / BPH / 7,20 BPD (nominal flow) BUSHINGS BACK PULL OUT SEAL HEAD DRIVER SHAFT DRIVEN
More informationDESIGNER S GUIDE STRAINERS INTERNATIONAL
Y Strainers Basket Strainers T-Strainers Automatic Backwash Strainers Duplex Strainers Suction Diffusers Butterfly Valves Check Valves INTERNATIONAL DESIGNER S GUIDE Formerly SSI Equipment, now manufactured
More informationVertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market,
More informationZE/ZF Process Pump API 610
ZE/ZF Process Pump API 610 Sulzer Pumps Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing with a deep commitment to fully understand the needs of our customers.
More informationType BBT / BBT-D Pumps API610 9 th Ed. (ISO 13709) BBT-BBTD Sales Presentation.ppt / 1
API610 9 th Ed. (ISO 13709) BBT-BBTD Sales Presentation.ppt / 1 API610 9 th Ed. (ISO 13709) BBT single suction, 2 stage radially split BBT-D double suction, 2 stage radially split BBT-BBTD Sales Presentation.ppt
More informationSan Antonio, TX San Antonio, TX A Lookout Ridge. Pumps Unlimited. Boerne, TX IH 10 West. Smith Pump Co.
I. Hydromatic Pump Parts and Accessories (self-priming pumps) EACH 30 MP 10 sets 4.35 4.20 6.10 1. O-Ring, #00241-007-1 EACH 43.50 42.00 61.00 4 ea. 130.41 126.00 176.40 2. Wear Plate, #01060-000-2 EACH
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationHigh-Head, High-Performance, Self-Priming Trash Pumps
ULTRA V SERIES High-Head, High-Performance, Self-Priming Trash Pumps A HISTORY OF INNOVATION Gorman-Rupp has been revolutionizing the pumping industry since 1933. Many of the innovations introduced by
More informationPWH API 610 SINGLE STAGE OH2
PWH API 610 SINGLE STAGE OH2 PWH API 610 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationVIKING JACKETED ASPHALT PUMPS
VIKING ED ASPHALT PUMPS SERIES 34 AND 434 Section 430 Page 430.1 Issue G FEATURES 1 Pressure 1 Temperature 1 Viscosity 1 Flow To 100 PSI (6.9 Bar) -60 F. to +450 F. (-51 C. to +232 C.) 31 SSU to 250,000
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water
Goulds Pumps Marlow Series 2EVP Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents STANDARD UNIT INCLUDES: Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationSERIES WC & WCS. Watchman Series & WCS Condensate Units. Replacement Parts for. Hoffman PARTS LIST DN0436. Hoffman Pump
Hoffman PARTS LIST DN06 REVISION B Watchman Series WC Cast Iron Receiver Single or Duplex Replacement Parts for Watchman Series WCS Steel Receiver Single or Duplex Watchman Series WC & WCS Condensate Units
More information480 Series Vertical Turbine Pumps
480 Series Vertical Turbine Pumps Flows to: 300,000 GPM Heads to: 1400+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 130 Years of Pump Manufacturing American-Marsh Pumps, one
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationITT SSV. Goulds Pumps. Engineered for life. Commercial Water. G&L Series Repair Parts
ITT Commercial Water Goulds Pumps SSV G&L Series epair Parts Goulds Pumps is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc. www.goulds.com Engineered for life TABLE OF CONTENTS
More informationInstalled on the pump suction, CRISPIN Foot Valves prevent the
Foot Valves Crispin Foot Valves SERIES Valve Function Maintains pump prime upon pump outage Features Resilient seat provides positive shut off Full flow area Stainless steel inlet screen Rugged construction
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationTECHNICAL BROCHURE BAC2000. Series 2000 Closed Coupled. Series 2000 Frame Mounted. Series A-C 2000 SINGLE STAGE END SUCTION
TECHNICAL BROCHURE BAC0 Series 0 Closed Coupled Series 0 Frame Mounted Series A-C 0 SINGLE STAGE END SUCTION Series A-C 0 End Suction Close Coupled - Model 0 APPLICATIONS General Industry Water Supply
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More informationFKL PUMP HEAD ASSEMBLY
FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) 25 24 51 28 12b 31 23 53 52 15 30 29 9b 26 10 3 5 12600616 7/1/2011 33 32 11b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a
More informationPWH API 610 SINGLE STAGE OH2
PWH API 610 SINGLE STAGE OH2 PWH API 610 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationG&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Standard Pump (shown: KK123A) Jacketed Pump (shown: KK4223A) Nominal Flow Rates: Pump
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationPWM API 610 BB3 Multistage Pump
PWM API 610 BB Multistage Pump PWM API 610 BB MULTISTAGE PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage FLOW (m /h) Visit our web site at www.pumpworks610.com and specify flow and performance
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationNominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationEnd Suction Centrifugal
M o d e l s 3 U / 3 U B End Suction Centrifugal Operating Instructions, Installation & Maintenance Manual Certified to NSF/ANSI 6, ANNEX G * NSF/ANSI 6 Annex G listed models: 3U EBARA International Corporation
More information1SP05C, 1SP07C, 12SP10C, 15SP15C, 2SP20C, & 2SP30C Series
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationPWH API 610 SINGLE STAGE OH2
API 6 SINGLE STAGE OH2 API 6 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE Hz Performance Coverage Visit our web site at www.pumpworks6.com and specify flow and performance needs and obtain pump selection,
More informationGoulds 3610 API 610/ISO Axially-Split, Between-Bearing, (BB1) Pump
Goulds LF 3196 Goulds Pumps Goulds 3610 API 610/ISO 13709 Axially-Split, Between-Bearing, (BB1) Pump A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationREPAIR PARTS ROBJETSU. Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT
REPAIR PARTS ROBJETSU Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT Index JETS J03, J05, J03N, J05N...3 JS...4 JL07N, JL0N...5 GH...6 Primeflow...7 XSH...8 VA...9 SUBMERSIBLES E... 0 4" High
More information900 Series Split Case Fire Pump Systems
BULLETIN 900/REV. E 900 Series Split Case Fire Pump Systems MODEL 481 MODEL 483 FM Approved U L Listed motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48
More informationMAHLE Automatic Filter Series R8-30W
MAHLE Automatic Filter Series R8-30W With internal pressure segment cleaning, rated pressure to 150 psi Connection Sizes: ANSI 8" to ANSI 20", welded design 1. Features Powerful, fully automatic filtration
More informationSpecifications Information and Repair Parts Manual , , , &
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationProduct Range IDEX CORPORATION
Product Range IDEX CORPORATION Viking Pump provides an unmatched combination of application expertise and positive displacement pumping products to meet your pumping needs. We specialize in the design,
More informationG O R M A N - R U P P P U M P S SELF-PRIMING ENGINE-DRIVEN PUMPS. GRpumps.com
G O R M A N - R U P P P U M P S SELF-PRIMING ENGINE-DRIVEN PUMPS GRpumps.com T H E R I G H T P U M P WHATEVER THE DUTY, ENGINE-DRIVEN PUMPS ARE RELIABLE, SIMPLE, AND EASY TO MAINTAIN Gorman-Rupp, the world
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationPumps - Parts - Motors - Service - Mechanical Seals 30 Liberty Street - Edison, NJ P F
Pumps - Parts - Motors - Service - Mechanical Seals 30 Liberty Street - Edison, NJ 08837 P 732-738-6210 - F 732-738-6211 www.metropumps.com Pump equipment Industrial Commercial Municipal Motors and variable
More informationBulletin C Dean Pump Division. R Series High Temperature Pumps R400/R4000 RWA RMA5000 RA2000/RA3000
Bulletin C 1.4.4 Dean Pump Division R Series High Temperature Pumps R4/R4 RMA RWA RA2/RA3 R Series High Temperature (Hot Oil/Hot Water) Centrifugal Process Pumps Process Industries Heat Transfer OEM s,
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationHIGH VELOCITY PUMP PUMP END
HIGH VELOCITY PUMP USFP pumps are designed for firefighting and high volume water supply in industrial, oil and gas, nuclear, municipal, and marine applications. The USFP High Velocity Pump is designed
More informationPWM. API 610 BB3 Multistage Pump
PWM API 610 BB3 Multistage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump
More information480 Series Vertical Turbine Pumps
480 Series Vertical Turbine Pumps Flows to: 85,000+ GPM Heads to: 2500+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 140 Years of Pump Manufacturing American-Marsh Pumps, one
More information