Safety Break-away Couplings - Breaking Bolt Series

Transcription

1 Fittings Safety reak-away Couplings - reaking olt Series Industrial Version The breaking bolt industrial breakaway coupling is designed to minimize spillage and damage associated with drive away and pull away incidents designed to be installed between a fixed point (pipe, pump, manifold) and a hose coupling automatically senses an excessive load, closes the valves and disconnects high flow rate / low pressure drop female NPT is standard, optional ANSI / DIN flanges or male NPT are available stainless steel or aluminum working pressure: stainless steel 360 PSI and aluminum 230 PSI at ambient temperature (70 F) Viton is standard seal 5" 8" DN # ASA flange Stainless Steel $ $ SC200SS SC300SS SC400SS SC500SS SC600SS SC800SSFL 1 POR POR SC200AL SC300AL SC400AL SC500AL SC600AL POR Width Length 5" 8" 4.5" 6.8" " 7" " Weight in Lbs. stainless aluminum Flow Rate/ GPM Marine Version The breaking bolt marine version break-away coupling is designed to minimize spillage and damage associated with pull-away incidents. designed to be installed within a hose string where the coupling will have a length of hose attached to both sides typical applications include: ship-to-offshore platform and shipto-ship product transfer operations coupling automatically senses an excessive load, closes the valves and disconnects release is executed when force causes bolts to break female NPT is standard, optional ANSI / DIN flanges or male NPT are available working pressure: 360 PSI at ambient temperature (70 F) 316T1 stainless steel body with Viton O-rings 5" 8" DN # ASA flange Stainless Steel MSC200SS MSC300SS MSC400SS MSC500SS MSC600SS MSC600SSFL 1 MSC800SSFL 1 $ POR POR How it Works Width Length Weight in Lbs. 5" 8" 4.5" 6.8" " 7" " Flow Rate/ GPM Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces. EFORE AFTER emergency disconnect The safety break-away valve consists of two halves, each with a valve that has an O-ring seal. emergency disconnect When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment. Optional Non-Closure Design The non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents thus protecting piping systems and equipment. This design allows spillage of product in these instances due to the lack of valving in the coupling. Useful in applications where non-hazardous product is being conveyed and where there are no environmental concerns. Available in both Industrial and Marine versions. Consult the factory for more information. 69

2 Fittings Couplings disconnect couplings are designed for the quick and spill free connection and disconnection of hoses and pipelines when transferring expensive hazardous product that is costly to clean up, reprocess or dispose of. disconnects are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids. Easy to handle - push and turn - free flow, turn and pull - closed Time saving - no need to drain hoses or pipe systems Economical - no loss or spillage of liquids at connection or disconnection Safety - the valve cannot be opened until the unit is coupled Environment friendly - accidental spillage eliminated when proper used Safe and reliable - due to rugged construction Product life - uncomplicated design and high quality materials ensures long product life Selectivity - To avoid product contamination caused by connecting a coupler to the wrong adapter, selective versions of the adapters are available. Contact the factory for further information. produced according to NATO standard STANAG 3756 and ATOFINA SGM 2049.TUY.C. Working Pressure (at ambient temperature (70 F): aluminum: 300 PSI, up to brass/ gunmetal *: 300 PSI, up to stainless steel: 360 PSI Optional seals: EPDM NR - nitrile Kalrez Chemraz Perlast Seal kits are available * produced to US government bronze specification G Interchanges with Avery Hardoll and Todo-matic How it Works The principle of operation is identical for all sizes of couplings. Closed: Turn and pull it's released - no spillage Open: Push and turn it's coupled - full flow 70

3 Fittings coupler has built-in swivel stainless steel ball bearings shaft journal in stainless steel embedded in PTFE (Teflon ) to eliminate seizure riveted piston pin to minimize the risk for failure under extreme pressure conditions the protective ring is a specially formulated, weather resistant and electrically conductive rubber compound Quick Couplers all wetted parts are stainless steel stainless steel couplers: rollers are Hastelloy C276 on the stainless steel shaft aluminum and brass couplers: rollers are aluminum-bronze on the stainless steel shaft Composite (Polyeten PE-HD 300) plugs provide very good protection against corrosion and withstand hot and cold environments. Coupler - Hose Unit ¾" and design and design and design design NPT ¾" ody 70 mm 70 mm 105 mm 164 mm 238 mm dry quick disconnect couplers x female NPT with Viton seals 316 Stainless Steel rass / Gunmetal * DDC075SS DDC100SS DDCSS DDC200SS DDC300SS105 DDC300SS DDC400SS DDC600SS $ DDC075AL DDC100AL DDCAL DDC200AL DDC300AL105 DDC300AL DDC400AL DDC600AL $ DDC075R DDC100R DDCR DDC200R DDC300GM105 DDC300GM DDC400GM $ * produced to US government bronze specification G Dust Plugs for Couplers ¾" and and ody 70 mm 105 mm 164 mm 238 mm Polyeten PE-HD 300 DDDP075 DDDP DDDP DDDP300 DDDP400 DDDP600 * $ * dust plug is aluminum 71

4 adapter is usually installed on the tank or manifold conical valve seat reduces the risk for piston blow out PTFE (Teflon ) bearing between the piston shaft and the piston guide eliminate the risk for seizure available in female NPT, # ASA flange or TTMA Composite (Polyeten PE-HD 300) caps provide very good protection against corrosion and withstand hot and cold environments. Fittings Quick Adapters Construction: aluminum adapter - aluminum poppet, stainless steel internal parts stainless steel adapter - stainless steel poppet, stainless steel internal parts brass / gunmetal * adapter - brass poppet, brass and stainless steel internal parts * produced to US government bronze specification G female NPT x adapter NPT ¾" Adapter - Tank Unit dry quick disconnect adapters x female NPT with Viton seals ody 70 mm 70 mm 105 mm 164 mm 238 mm 316 Stainless Steel rass / Gunmetal * DDA075SS DDA100SS DDASS DDA200SS DDA300SS105 DDA300SS DDA400SS DDA600SS $ DDA075AL DDA100AL DDAAL DDA200AL DDA300AL105 DDA300AL DDA400AL DDA600AL $ DDA075R DDA100R DDAR DDA200R DDA300GM105 DDA300GM DDA400GM $ # flange x adapter TTMA flange x adapter # Flange ¾" TTMA Flange dry quick disconnect adapters x # ASA flange with Viton seals ody 70 mm 70 mm 105 mm 164 mm 238 mm 316 Stainless Steel rass / Gunmetal * DDA075SSFL DDA100SSFL DDASSFL DDA200SSFL DDA300SS105FL DDA300SSFL DDA400SSFL DDA600SSFL $ DDA100ALFL DDAALFL DDA200ALFL DDA300AL105FL DDA300ALFL DDA400ALFL DDA600ALFL $ DDA100RFL DDARFL DDA200RFL DDA300GM105FL DDA300GMFL DDA400GMFL dry quick disconnect adapters x TTMA flange with Viton seals ody 105 mm 164 mm DDA300AL105TTMA DDA300AL119TTMA DDA400AL164TTMA $ $ Dust Caps for Adapters dust cap composite ¾" and and ody 70 mm 105 mm 164 mm 238 mm Polyeten PE-HD 300 DDDC075 DDDC DDDC DDDC300 DDDC400 DDDC600 * $ * dust cap is aluminum dust cap rubber ody 71 mm DGDC200 DGDC300 Rubber $

5 Technical Information: body: high strength aluminum coupling ring: gunmetal (procuced to U.S. government bronze specification G) bayonet flange and inner parts: stainless steel, aluminum all wetted parts are aluminum and stainless steel Fittings Aviation Couplings aviation couplings are designed for use in aviation refueling systems. Manufactured to accept the international standard point bayonet, hose end refueling nozzles according to: ISO45 / MS24484 / STANAG 3105 / ritish Aerospace Spec. 2C14. They are not configured for under-wing refueling. PSI working pressure at ambient temperature (70 F) Composite (Polyeten PE-HD 300) plug provides good protection against corrosion and withstands hot and cold environments. Coupler - Hose Unit stainless steel ball bearings gunmetal coupling ring minimizes the risk of seizure stainless steel shaft journal embedded in PTFE (Teflon ) eliminate seizure PTFE (Teflon ) bearings between the driving plate and the piston guide eliminate the risk of seizure riveted piston pin minimizes the risk of failure under extreme pressure conditions the protective ring is a specially formulated, weather resistant and electrically conductive rubber compound aviation couplers x female NPT with Viton seals NPT ody ISO 45 ISO 45 DAC250AL DAC300AL $ aviation couplers x female SP with Viton seals female thread x coupler SP ody ISO 45 ISO 45 DAC250ALSP DAC300ALSP $ filter / screen can be inspected through the sight glass filter / screen is easily removed if cleaning is required screen is 100 mesh Sight Flow Indicator with Filter / Screen NPT NPT NPT NPT aviation sight flow indicator with filter / screen SP SP NPT NPT ASFI25T25 ASFI30T30 ASFI25T25T ASFI30T30T $ Dust Plug for Couplers Polyeten PE-HD 300 ody ISO 45 DADP250 $

6 Fittings Aviation Couplings aviation couplings are designed for use in aviation refueling systems. Manufactured to accept the international standard point bayonet, hose end refueling nozzles according to: ISO45 / MS24484 / STANAG 3105 / ritish Aerospace Spec. 2C14. They are not configured for under-wing refueling. Technical Information: body: high strength aluminum coupling ring: gunmetal bayonet flange and inner parts: stainless steel, aluminum all wetted parts are in aluminum and stainless steel PSI working pressure at ambient temperature (70 F) Composite (Polyeten PE-HD 300) cap provides good protection against corrosion and withstands hot and cold environments. Adapter - Tank Unit gunmetal coupling ring minimizes the risk of seizure PTFE (Teflon ) bearings between the piston shaft and the piston guide eliminate the risk of seizure conical valve seat eliminates the risk of piston blow out when extreme pressure is used aviation adapters x female NPT with Viton seals NPT ody ISO 45 ISO 45 DAA250AL DAA300AL $ female thread x adapter aviation adapters x # ASA flange with Viton seals # Flange ody ISO 45 ISO 45 DAA250ALFL DAA300ALFL $ # flange x adapter Dust Cap for Adapters Polyeten PE-HD 300 ody ISO 45 DADC250 $

7 Fittings reak Cam and Groove Couplings Couplers dry disconnect coupler has automatic closing poppet assembly heavy duty stainless steel crank and link provide long service life stainless steel handle allows product exposure to corrosive chemicals or washdown service strong handle attachment prevents bending of crank assembly fully interchangeable with Kamvalok (OPW trademark) style fittings Must be used with a DA style adapter for coupler to operate. Adapter sold separately. 1 stainless steel corrosion resistance is comparable to 304 stainless steel 2 Kalrez gasket, main seal O-ring and handle O-ring. Teflon seals on cylinder assembly, stuffing box, and seal under poppet screw. coupler x female NPT NPT Coupler Seal Material una Viton Teflon Encapsulated Silicone & Kalrez EPT Kalrez and Teflon 2 Teflon Encapsulated Viton & Kalrez Viton Max. PSI at 70 Stainless Steel 1 DC61- DC DC DC62- DC DC DC63- DC DC DC64- DC DC DC DC $ aluminum fittings have stainless steel internals 1 for pressure ratings at other temperatures, contact the factory Dixon EZ oss-lock cam arms provide high security from accidental opening due to vibration or snagging on and fittings large paddle type cam arms allow for an easy grip on fittings DC71- DC DC DC72- DC DC DC73- DC DC DC74- DC DC DC76- DC DC DC77- DC DC DC $ and coupler x female NPT coupler x female NPT NPT Coupler greaseless coupler x female NPT Seal Material Max. PSI at 70 Teflon Encapsulated Viton & Kalrez Teflon Encapsulated Viton & Kalrez Stainless Steel 1 DC77--GL DC GL $ NPT Coupler coupler x 90 swivel female NPT Seal Material una Viton Teflon Encapsulated Silicone & Kalrez Max. PSI at 70 DS DS DS $ for use with and dry disconnect couplers for use with dry disconnect couplers Locking Kit for Couplers DCL-200 DCL-300 $

8 Fittings reak Cam and Groove Couplings Compatible with most cam and groove style dry disconnects. The ayco dry disconnect helps prevent spillage from normal or accidental disconnects. A spring loaded sealing device is designed to snap closed should the valve become disconnected with the poppet open, significantly limiting liquid loss. Our dry disconnect couplings are available in a wide range of sizes, metals, and seal materials. Please refer to our product description cross-reference chart for details. Contact the Dixon at for chemical compatibility, size, and material selection. Special configurations can be designed for your application. and adapter adapter NEW for 2011!! Adapters two-piece adapter design for easy rebuilding of adapters fully interchangeable with Kamvalok (OPW trademark) style fittings aluminum fittings have aluminum nose piece and brass piston for pressure ratings at other temperatures, contact the factory adapter x female NPT NPT NPT Flange Adapter Adapter Adapter Seal Material una Viton Teflon Encapsulated Silicone EPT Kalrez Teflon Encapsulated Viton Viton Max. PSI at 70 Max. Seal Material PSI at 70 una Viton Stainless Steel 1 DA11- DA DA DA12- DA DA DA63- DA DA DA64- DA DA DA66- DA DA DA $ jump size adapter x female NPT DA DA DA71- DA DA DA72- DA DA DA73- DA DA DA74- DA DA DA76- DA DA DA77- DA DA adapter x # ASA flange Max. Stainless Steel 1 Seal Material PSI at 70 Viton DAF Teflon Encapsulated Silicone DAF EPT DAF Kalrez DAF Viton DAF Teflon Encapsulated Silicone DAF EPT DAF Kalrez DAF Viton DAF Teflon Encapsulated Silicone DAF EPT DAF Kalrez DAF $ $ $ NPSM Adapter vapor adapter x female thread Max. Stainless Steel 1 Seal Material PSI at 70 Teflon DAV $ stainless steel corrosion resistance is comparable to 304 stainless steel 76

9 Fittings Gas Couplings gas couplings are designed for safe loading and discharge of bobtails or intermediate bulk delivery trucks. They are quick and easy to connect and can be connected to a tank unit with pressures up to 225 PSI at ambient temperature (70 F). If the pressure is higher you can equip the couplings with a pressure relief valve. The easy to connect pressure relief valve dissipates trapped fluid pressure into the hose coupler without spillage. The primary application of dry gas couplings is in the handling of LPG - Propane and utane. safe handling of LPG easy to use and saves time reliable and easy to maintain can be coupled to a tank unit with pressures up to 225 PSI minimizes the risk of cold burns minimizes spillage and product loss minimizes health risks keeps the environment free of hazardous vapors and liquids compatible with existing dry disconnect couplings Technical Information: stainless steel and brass / gunmetal (produced to US government bronze specification G) Viton seals female NPT and ASA flanges 360 PSI working pressure at ambient temperature (70 F) Composite (Polyeten PE-HD 300) plugs provide good protection against corrosion and withstand hot and cold environments. NPT Coupler - Hose Unit dry gas couplers x female NPT with Viton seals 316 Stainless Steel ody 71 mm DGC100SS DGC200SS DGC300SS $ Dust Plugs for Couplers female NPT x coupler ody 71 mm Polyeten PE-HD 300 DGDP100 DGDP200 DGDP300 $ NPT ACME 1¾" 3¼" Adapter - Tank Unit dry gas adapters x female NPT with Viton seals dry gas adapters x # ASA flange with Viton seals 316 Stainless Steel # Flange ody ody 71 mm 71 mm 316 Stainless Steel DGA100SS DGA200SS DGA300SS DGA100SSFL DGA200SSFL DGA300SSFL Dust Caps for Adapters $ dry gas adapters x female ACME thread with Viton seals 316 Stainless Steel ody 71 mm DGA100SS175 DGA200SS325 $ $ NEW for 2011!! female NPT x adapter # flange x adapter ody Material 71 mm polyeten PE-HD300 rubber rubber DGDC100 DGDC200 DGDC300 $

10 Fittings Flomax Part Number Cross-reference Standard Series Connectors R Series Connectors VT VT7 VT9 VTT Dixon Engine Oil ENL ENL-P ENL-PLUG ERJ Engine Oil ERS ERS-C ERS-CAP Coolant Fluid CN CN-P CN-PLUG Coolant Fluid CR-S CR-C CR-CAP Hydraulic Oil HN HN-P HN-PLUG Hydraulic Oil HR HR-C HR-CAP Transmission Fluid TN TN-P TN-PLUG Transmission Fluid TR TR-C TR-CAP Dixon Caterpillar part # 9S9273 9S9274 9S9271 9S IQ5459 5P IQ SP3587 Fuel Vent Series Caterpillar part # 6G7803 Wiggins part # OS2 OSP2 OP-12 ON6 ON2 ONC2A O312P EC EC285A A C-1807 P-1844 P-1804 P-1880 Wiggins part # ZV10 ZV10C Dixon Engine Oil R-EN R-EN-P R-EN-PLUG Engine Oil R-ER R-ER-C R-ER-CAP Coolant Fluid R-CN R-CN-P R-CN-PLUG Coolant Fluid R-CR R-CR-C R-CR-CAP Hydraulic Oil R-HN R-HN-P R-HN-PLUG Hydraulic Oil R-HR R-HR-C R-HR-CAP Transmission Fluid R-TN R-TN-P R-TN-PLUG Transmission Fluid R-TR R-TR-C R-TR-CAP Dixon FN600 FN600L FN600-PLUG FRS FRS-C FRA FRA-C FR-CAP FR2 FR2-C FR2-R GFR-0 GFR-45 GFR-90 GFR1-0 GFR1-45 GFR1-90 FNS FNS2 FN600S FNS10 Caterpillar part # Diesel Fueling System Caterpillar part # D0630 Wiggins part # R15 R16 R11 R12 R17 R18 R13 R14 Wiggins part # ZZ99A1 ZN2A ZNC2A ZN2A ZNC2A ZC20P ZN6A ZN6 ZN6 ZN6 ZS9 78

11 Fittings Flomax Diesel Fueling System Designed for on-site refueling of construction, mining, forestry and agricultural equipment. Interchanges with Caterpillar and Wiggins systems. Diesel Fuel Nozzle female NPT integrated high flow swivel integrated sealing plug plug/bumper assembly gives complete nose seal stainless steel dog latch mechanism and ball lock styles available tested to 180 gallons per minute investment cast aluminum housing anodized aluminum non-wear parts heat treated stainless steel wear components Delron bushings eliminate metal-to-metal wear dog latch mechanism with sealing plug ball lock with sealing plug sealing plug for FN600 sealing plug for FN600L FN600 FN600L FN600-PLUG FN600 $ Diesel Fuel Receiver male NPT available in anodized aluminum or nickel-plated steel O-ring sealed aluminum cap cap has set screw attached vinyl coated cable lanyard one-piece body Material one-piece receiver without cap one-piece receiver with cap one-piece receiver without cap one-piece receiver with cap cap for receiver nickel-plated steel nickel-plated steel anodized aluminum anodized aluminum anodized aluminum FRS FRS-C FRA FRA-C FR-CAP $ FR2 receiver allows replacement of wear components without draining the fuel tank FR2 receiver has an aluminum base with nickel-plated steel nose two-piece body two piece receiver with removable stainless sleeve without cap two piece receiver with removable stainless sleeve with cap removable sleeve replacement for two piece receiver FR-RS FR-RS-C FR-RS-R $ Diesel Fuel Swivels stainless steel male threaded base stainless steel ball bearings hand black anodized female threaded nut fluorosilicone sealing O-rings male NPT x female NPT male NPT x female NPT female NPT x female NPT standard standard double FNS FNS2 FNSID $ standard male NPS x female NPT used with FN600 FN600S $ double 79

12 Fittings Flomax Diesel Fueling System Diesel Fuel Gravity Fill Receiver used with the FN600 or FN600L to convert to gravity fueling GFR-0 GFR /8" 1-3/8" 1-3/8" straight straight GFR-0 GFR-45 GFR-90 GFR1-0 GFR1-45 GFR1-90 $ Flomax Fuel Vent Series male NPT billet cap provides superior impact resistance easily serviced all metal construction rigid ball cage for positive seal available with: threaded outlet half coupling anti-vandalism mounting with 5" tube with 7" tube with 9" tube with 5" tube and threaded outlet VT VT7 VT9 VTT $ VTT NEW for 2011!! Flomax Service ox Designed to enclose receivers for diesel fuel, hydraulic oil, transmission fluid and coolant reducing contamination and weather related problems. normally installed on heavy duty earth mover equipment and drill rigs 12 gauge steel construction with heavy duty hinges painted white - Imron Primer FS $ does not include receivers shown in photo 80

13 Fittings Flomax Standard Series Connectors The Flomax standard series connectors consist of four color-coded mating connectors. They have all-metal construction with stainless steel wear components and anodized aircraft grade aluminum non-wear components. Each has easily recognizable labeling and is fully compatible and interchangeable with industry standards. universally fits all crankcase receivers, both R-series and Standard series incorporates 10 locking balls with a 40% deeper engagement Engine Oil (red) resistant to clogging with a greater ease of cleaning smooth actuation larger diameter pullback lanyard bright red anodized aircraft grade aluminum engine nozzle ball lock engine nozzle ball lock with plug engine nozzle plug ENL ENL-P ENL-PLUG $ ¾" JIC ¾" JIC engine receiver engine receiver with cap engine receiver cap engine receiver with JIC bulkhead base engine receiver with JIC bulkhead base and cap ERS ERS-C ERS-CAP ERJ ERJ-C $ ERJ-C nickle-plated stainless steel nozzle nose and base standard roll-pin locking mechanism Coolant Fluid (teal) ergonomically engineered pullbacks and caps bright teal anodized aircraft grade aluminum ½" NPT ½" NPT coolant nozzle ball lock coolant nozzle ball lock with plug coolant nozzle plug CN CN-P CN-PLUG $ ½" NPT ½" NPT coolant receiver coolant receiver with cap coolant receiver cap CR-S CR-C CR-CAP $

14 Fittings Flomax Standard Series Connectors The Flomax standard series connectors consist of four color-coded mating connectors. They have all-metal construction with stainless steel wear components and anodized aircraft grade aluminum non-wear components. Each has easily recognizable labeling and is fully compatible and interchangeable with industry standards. nickle-plated stainless steel wear components 10 steel dog latching mechanism Hydraulic Oil (gold) ergonomically engineered pullbacks and caps bright gold anodized aircraft grade aluminum hydraulic nozzle hydraulic nozzle with plug hydraulic nozzle plug HN HN-P HN-PLUG $ hydraulic receiver hydraulic receiver with cap hydraulic receiver cap HR HR-C HR-CAP $ Transmission Fluid (violet) nickle-plated stainless steel nose and base 6 steel dog latching mechanism ergonomically engineered pullbacks and caps bright violet anodized aircraft grade aluminum ½" NPT ½" NPT transmission nozzle transmission nozzle with plug transmission nozzle plug TN TN-P TN-PLUG $ /8" NPT 3/8" NPT transmission receiver transmission receiver with cap transmission receiver cap TR TR-C TR-CAP $

15 Fittings Flomax R Series Connectors The Flomax R-series connectors are fully compatible and interchangeable with industry standards. They have all-metal construction using anodized aircraft grade aluminum non-wear components. all metal construction standard roll-pin locking mechanism Engine Oil (red) ergonomically engineered pullbacks and caps bright red anodized aircraft grade aluminum R-series engine nozzle R-series engine nozzle with plug R-series engine nozzle plug R-EN R-EN-P R-EN-PLUG $ UN-2A UN-2A UN UN-2 R-series engine receiver R-series engine receiver with cap R-series engine receiver cap R-ER R-ER-C R-ER-CAP $ Coolant (teal) all metal construction standard roll-pin locking mechanism ergonomically engineered pullbacks and caps bright teal anodized aircraft grade aluminum ½" NPT ½" NPT R-series coolant nozzle R-series coolant nozzle with plug R-series coolant nozzle plug R-CN R-CN-P R-CN-PLUG $ UN-2A UN-2A UN UN-2 R-series coolant receiver R-series coolant receiver with cap R-series coolant receiver cap R-CR R-CR-C R-CR-CAP $

16 Fittings Flomax R Series Connectors The Flomax R-series connectors are fully compatible and interchangeable with industry standards. They have all-metal construction using anodized aircraft grade aluminum non-wear components. all metal construction standard roll-pin locking mechanism Hydraulic Oil (gold) ergonomically engineered pullbacks and caps bright gold anodized aircraft grade aluminum NPT NPT R-series hydraulic nozzle R-series hydraulic nozzle with plug R-series hydraulic nozzle plug R-HN R-HN-P R-HN-PLUG $ UN-2A UN-2A UN UN-2 R-series hydraulic receiver R-series hydraulic receiver with cap R-series hydraulic receiver cap R-HR R-HR-C R-HR-CAP $ Transmission Fluid (violet) all metal construction standard roll-pin locking mechanism ergonomically engineered pullbacks and caps bright violet anodized aircraft grade aluminum R-series transmission nozzle R-series transmission nozzle with plug R-series transmission nozzle plug R-TN R-TN-P R-TN-PLUG $ UN-2A UN-2A UN-2 R-series transmission receiver UN-2 R-series transmission receiver with cap R-series transmission receiver cap R-TR R-TR-C R-TR-CAP $

17 maximum flow rate of 45 GPM at 70 PSI working pressure rating: 200 PSI NPT size ¾" red nozzle with plug gold nozzle with plug teal nozzle with plug violet nozzle with plug navy nozzle with plug copper nozzle with plug Fittings Flomax High Flow Series 3/ Series Consists of 6 nozzle and receiver sets that are color coded for quick identification of mating parts. Each color nozzle and receiver will only couple with their matching color component. This provides complete protection against cross contamination. The standard mounting for the nozzle is a ¾" female NPT and for the receiver is a ¾" male NPT. ENL-P ENL-P2 ENL-P3 ENL-P4 ENL-P5 ENL-P6 $ NPT size ¾" red receiver with cap gold receiver with cap teal receiver with cap violet receiver with cap navy receiver with cap copper receiver with cap ERS-C ERS-C2 ERS-C3 ERS-C4 ERS-C5 ERS-C6 $ Note: ERS series is available with JIC bulkhead base. Substitute 'J' for 'S'. Example: ERJ-C2 Each of the 7 nozzles and 7 receivers has the following performance: The nozzle/receiver combination has a flow area equivalent to a schedule 80 pipe. The fittings have a 500 PSI working pressure rating with 0 PSI minimum burst pressure. All wear parts are constructed of stainless steel for long life and corrosion resistance. All non-wear parts are constructed of colored anodized aircraft grade aluminum for high strength, lightweight and corrosion resistance. Series Consists of 7 nozzle and receiver sets that are color coded for quick identification of mating parts. Each color nozzle and receiver will only couple with their matching color component. This will provide complete protection against cross contamination. The standard mounting for the nozzle is a female NPT and for the receiver is a male NPT. The receivers also come with a female NPT threaded base. The nozzle incorporates a "ball lock" mechanism to ensure smooth and reliable operation. Physical : nozzle length: 3.90" (99 mm) receiver length: 3.4 (87 mm) diameter: 2.50" (64 mm) hex size: (51 mm) nozzle and receiver coupled length: 5.4 (138 mm) NPT size red nozzle with plug gold nozzle with plug teal nozzle with plug violet nozzle with plug navy nozzle with plug copper nozzle with plug blue/gray nozzle with plug NPT size red receiver with cap gold receiver with cap teal receiver with cap violet receiver with cap navy receiver with cap copper receiver with cap blue/gray receiver with cap HFN-P1 HFN-P2 HFN-P3 HFN-P4 HFN-P5 HFN-P6 HFN-P7 $ HFR-C1 HFR-C2 HFR-C3 HFR-C4 HFR-C5 HFR-C6 HFR-C7 $