Automatic filter AF 172 G
|
|
- Georgiana Farmer
- 5 years ago
- Views:
Transcription
1 Automatic filter AF 172 G with external pressure cleaning and integrated cyclone effect Connection sizes: DN 40/G1 1/2, cast design 1. Short description MAHLE automatic backflush filters are suitable for applications where low-viscosity liquids have to be filtered. These compact, inline filter systems are designed for automatic cleaning. The system is cleaned by rotating the element and backflushing with external or internal pressure media. Advantages: Low lifecycle costs because no filter material is consumed Cleaning without interrupting filtration Precise separation quality in accordance with the surface filter principle Top-quality, asymmetric filter medium made of multiple-sintered stainless steel fleece on a rugged core element Efficient filter cleaning assures maximum process stability Solid construction and high-quality materials for a long service life Minimal liquid loss during cleaning Filter cleaned one segment at a time with a high backflush pulse Actual filter rating and nominal separation are indicated Integrated preseparation thanks to tangential inflow and preseparator tube Material variants open up a wide range of applications Modular MAHLE Vario system for optimum filter selection Application in Ex zone 1 and 2 optional Easy maintenance Worldwide distribution
2 2. Operating principle The MAHLE AF 172 G backflush filter belongs to the Vario series. The compact MAHLE automatic filter system is used for fine and micro-filtration of a variety of low-viscosity liquids. This inline pressure filter consumes no filter material, which means there is also no need for subsequent disposal. The filter is cleaned without interrupting operation. The concentrated solids are drained off simply by opening the system for a short time. The medium to be cleaned is guided into the filter housing under pressure and flows inward through the MAHLE segmented element. Particles settle on the surface of the filter medium. The filtered fluid exits the filter housing at the top opposite the inlet connection. The integrated preseperator relieves the load on the segmented element, particularly from coarse and heavy particles. This is achieved by a tangential flow around the preseparator tube and the deflection edges. The filter is cleaned when a preset differential pressure limit, a set interval or a defined filtered fluid quantity is reached. _ The segmented element is turned as the cleaning and external pressure valves are opened. The segments are then guided one at a time past the pressure channel housing on the inside and the flushing channel on the outside, causing them to open and close alternately. The integrated external pressure accumulator is pretensioned during closing, so that when one segment opens, an outward surge cleans the separated particles from the filter material. As a result of this pulse cleaning principle, the particles are catapulted out, collected in the flushing channel and discharged almost entirely with external medium. One turn suffices to clean all segments. The residue that has settled in the collection cone can be emptied via the drain valve either when the machine is at a stillstand or during filtration. All filters of the MAHLE Vario series are protected by various patents. Used MAHLE filter elements in the AF 172 G backflush filter: MAHLE topmesh elements (standard): Good cleanability due to asymmetric design Large effective filter surface Defined particle retention Several material combinations possible MAHLE notched wire elements: High differential pressure stability High wear resistance in extreme applications Good backflush properties Several material combinations possible 1 Inlet connection 2 Outer inlet plenum 3 Preseparator tube 4 Inner inlet plenum 5 MAHLE segmented element 6 MAHLE filter material 7 Plenum for filtered fluid 8 Outlet connection for filtered fluid 9 Residue collection cone 10 Drain valve 11 Drive motor 12 External pressure connection, external pressure and backflush valves and gauge P f 13 External pressure accumulator 14 External pressure nozzle 15 Flushing channel (outside) 16 Cleaning valve (P3 control throttle) 17 Differential pressure contact gauge 18 P1 gauge AF 172 G 2
3 3. Technical data 1 Cleaning drive: can be mounted turned 90 2 External pressure valve 3 Vent screw G¼ 4 Optional: Differential pressure indicator/switch 5 Optional: Pressure sensor 6 Optional: Sensor Actor Box 7 Mounting plate 8 Optional: Automatic backflush valve 9 Optional: P3 control throttle with P3 gauge 10 Name-plate 11 Optional: Automatic drain valve Clearance = 400 mm Filter data Motor data Max. operat. pressure: 16 bar Max. operat. temperature: 100 C Materials: - Housing and cover: cast iron - Internals: C-steel, PPS GF40 - Bearing bushes: PTFE based - Seals: FPM (Viton) - Segmented element: /Al ( p max. 10 bar) Cover lock: 4 x M16 hexagon screws Optional: Ex protection acc. to ATEX 94/9/EG: - Electrical components in Ex II 2G T3 - Mechanical design in Ex II 2G c T3 Connections and nominal diameters: - A-inlet, B-outlet, C-drain: G1½-DN40 - D-external pressure: G1 (must be reduced to G½ by the costumer) - E-backflush: G1 - F-gauge: G½ - G-indicator: G1/8 - All threaded holes acc. to DIN 3852 form X Worm gear motor Multi-range winding V Hz kw U/min A 230 ± 10% 50 0, ,2 400 ± 10% 50 0, ,7 266 ± 10% 60 0, ,1 460 ± 10% 60 0, ,7 Protection class: IP 55; insulation class F; output torque: 97 Nm Optional: Worm gear motor Ex Ex II 2G T3, output torque: 97 Nm Weight: 40 kg Volume: 8 l Differential pressure resistance Segmented elements with topmesh: 10 bar Other versions available on request. Drive shaft seal: External finish: Lip seal with O-Ring Synthetic resin primer, blue acc. to RAL 5007 Technical data is subject to change without notice! AF 172 G 3
4 4. Design and application Element type (see section 6) Total surface in cm² Filter rating in µm/ effective filter surface in cm² AF 100XX Effective filter surface in % Effective filter surface in cm² recommended design Possible cleaning and discharge modes Fully automatic operation: Filtration usually takes place under pressure. The filter is cleaned after a programmed time or a preset number of cycles or according to the differential pressure. We recommend cleaning the system at a differential pressure of approx bar. The cleaning motor is operated for around 3 s (about one turn of the element). The external pressure and cleaning valves remain open for this period. This suffices to clean the filter thoroughly. The drain valve is opened in order to discharge the filter. Depending on the residue concentration, this can either take place directly after cleaning or be time or cycle controlled. The opening time of the drain valve is 2 bis 3 s. Refer to the Instruction Manual for further information. MAHLE's team of specialists will be pleased to assist in any way. Tests can be carried out in the absence of reliable evaluation criteria. 5. Performance curves The curves indicate the volume flow through the complete filter system (filter housingh including element) and are referred to a differential pressure of 0.3 bar. Specific process information is essential to guarantee reliable operation of an automatic filter. Viscosity in mm²/s y = Volum flow V [l/min] x = Filter rating f [µm] AF 172 G 4
5 6. Type number key Type number key with selection example for AF /G2 Size AF x 65x230 No. of steps x diameter x length [mm] Cleaning drive 3 Gear motor 230/400 V, 50 Hz or 266/460 V, 60 Hz 4 Gear motor 230/400 V, 50 Hz Ex II 2G T3 Inlet and outlet connections 2 G1 1/2 in flange DN 40 PN16 Permissible operating pressure in bar (housing/cover) 2 PN 16 Material Seal FPM, bearing PTFE 1 Housing and cover nodular cast iron, internals steel, aluminium 3 Housing and cover nodular cast iron, internals stainless steel / Differential pressure indicator and gauge 1 PiS 3076, switching level at 1.2 bar, static 63 bar, aluminium/fpm 2 PiS 3076, switching level at 0.7 bar, static 63 bar, aluminium/fpm 4 PiS 3170, digital p-gauge, 2 switching levels settable from 0-16 bar Valves and control throttles 3 External pressure valve G1 for liquid, 24 V DC 4 External pressure valve G1 for liquid, 230 V AC Drain valve 2 Ball valve, electropneumatic 24 V DC 3 Ball valve, electropneumatic 230 V AC 4 Ball valve, electric 24 V DC 5 Ball valve, electric 230 V AC Cleaning valve 2 Ball valve, electropneumatic 24 V DC 3 Ball valve, electropneumatic 230 V AC 4 Ball valve, electric 24 V DC 5 Ball valve, electric 230 V AC Optional features 0 Without/special version. AF XXXX (end number for special version)/g2. End number Special version 3001 Standard filter insert (complete), without housing or drive 3002 Standard filter insert (complete), without housing, with drive 3700 Seals PTFE Other numbers On request AF 172 G 5
6 Type number key with selection example for AF 100 element Series /E1 AF 100 Segmented element with topmesh (20 µm to 100 µm) Material Core element Filter medium Clamp rings Wire width in mm Segmented element 17 Al St - Overall length Diameter x lenght in mm x 265 Gap width/rating in µm (see 4. Design and application) µm µm µm µm µm µm Other filter ratings on request. AF /E Spare parts Material no. No. Designation FPM/C steel PTFE/VA 1 Bush kit Set of seals (complete) Backflush channel moulding Backflush valve Filter element See name-plate Please contact us for detailed technical information, any open questions about options, accessories and for general expert advice. Completion of the relevant questionnaire would facilitate in the coordination of all important parameters. Comprehensive documentation on our filter range, filter elements and accessories can be provided. About installation and operation, please refer to the Instruction Manual.. MAHLE Industriefiltration GmbH Schleifbachweg Öhringen Phone Fax industrialfiltration@mahle.com /2012 AF 172 G 6
Automatic filter AF 173 G
Automatic filter AF 7 G with external pressure cleaning and integrated cyclone effect Connection sizes: G, screw-in flange DN 0 and DN, cast design Short description MAHLE automatic backflush filters are
More informationAutomatic filter AF 112 G
Automatic filter AF 112 G Cast design with internal pressure cleaning and integrated cyclone effect Connection size: flange DN 40 or G1 1/2 1 Short description MAHLE automatic backflush filters are suitable
More informationAutomatic filter AF 113 G
Automatic filter AF 113 G Cast design with internal pressure cleaning and integrated cyclone effect Connection sizes: G2, screw in flange DN 50 and DN 65 1 Short description MAHLE automatic backflush filters
More informationAutomatic filter AF 173 G
Automatic filter AF 7 G with external pressure cleaning and integrated cyclone effect Connection size DN 0/G, cast stainless steel Short description MAHLE automatic backflush filters are suitable for all
More informationAutomatic filter AF 113 G
Automatic filter AF G Cast design with internal pressure cleaning and integrated cyclone effect Connection sizes: G, screw in flange DN 0 and DN Short description MAHLE automatic backflush filters are
More informationAutomatic filter AF 153 G
Automatic filter AF 153 G with scraper and external pressure cleaning Connection sizes: DN 50/G2, cast stainless steel 1 Features MAHLE automatic backflush filters are suitable for all applications where
More informationAutomatic metal-edge filter AF 73 G/AF 93 G
Automatic metal-edge filter AF 73 G/AF 93 G with radial scraper cleaning Connection size G2, screw-in flange DN 50 and DN 65 1 Features MAHLE automatic metal-edge filters are suitable for all applications
More informationAutomatic metal-edge filters AF 72 G
Automatic metal-edge filters AF 72 G with radial scraper cleaning Connection size G1 1/2, flange DN 40 1 Short description MAHLE automatic metal-edge filters are suitable for all applications where low
More informationAutomatic metal-edge filter AF 71 G
Automatic metal-edge filter AF 71 G with radial scraper cleaning Connection size G1 1 Features MAHLE automatic metal-edge filters are suitable for all applications where low or high-viscosity liquids or
More informationAutomatic metal-edge filter AF 75 S / AF 95 S
Automatic metal-edge filter AF 75 S / AF 95 S with radial scraper cleaning housing in welded design, optionally with cyclone effect Connection size DN 150, DN 200, DN 250 others upon request 1. Features
More informationFilter module AF Features. MAHLE Industrialfiltration is now Filtration Group. For more information, visit
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Filter module AF 43 Nominal pressure 16 bar, nominal temperature 180 C; nominal width DN 80 to DN
More informationOff-line Oil Filter Module Pi 8400
Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationOil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationDuplex Filter Pi Features. Nominal pressure 10/16 bar (140/230 psi), nominal size 1250 up to 8000
Duplex Filter Pi 281 Nominal pressure / bar (140/230 psi), nominal size 1 up to 8000 1. Features _ High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop
More informationHigh Pressure Filter Pi 4000
High Pressure Filter Pi 4000 Nominal pressure 400 bar (5690 psi), nominal size up to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
More informationLow Pressure Filter Pi 2000/Pi 2200
Low Pressure Filter Pi 2000/Pi 2200 Nominal pressure 25 bar (360 psi), nominal size 630 up to 2000 according to DIN 24550 1 Features : HIgh performance filters for modern hydraulic systems Modular system
More informationMedium Pressure Filter Pi 340
Medium Pressure Filter Pi 340 Nominal pressure 250/315/350 bar (3560/4480/4980 psi), nominal size up to 450 (also available with filter elements acc. to DIN 24550) 1. Features. High performance filters
More informationMedium Pressure Filter Pi 3000
Medium Pressure Filter Pi 3000 Nominal pressure /315 bar (3040/4570 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided for pipe
More informationLine filter Pi Features. Nominal pressure 16 bar (230 psi), nominal size 400 up to 6000
Line filter Pi 1907 Nominal pressure 16 bar (20 psi), nominal size 400 up to 1 Features _ High performance filters for modern hydraulic systems Provided for pipe installation Modular design Compact design
More informationHigh Pressure Filter Pi 4230
High Pressure Filter Pi 4230 Nominal pressure 400 bar (5690 psi), nominal size 160 to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
More informationLow Pressure Filter Pi 2300
Low Pressure Filter Pi 2300 Nominal pressure 25/40 bar (360/570 psi), nominal size up to 1 Filter elements according DIN 24550 1. Features High performance filters for modern hydraulic systems Provided
More informationOil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationLow Pressure Filter Pi 200
Low Pressure Filter Pi 0 Nominal pressure 25/63 bar (360/910 psi), nominal size up to 450 1. Features._ High performance filters for modern hydraulic systems Provided for pipe installation Modular system
More informationHigh Pressure Filter Pi 4230
High Pressure Filter 4230 Nominal pressure 315 bar (4570 psi), nominal size 160 to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
More informationProfluid and Gap-type tube filters. Automatic filters
and Gap-type tube filters Automatic filters and Gap-type tube filters the efficient answer for multi-purpose applications Identical technology two different cleaning principles Automatic filters such as
More informationDuplex Filter Pi Features. Nominal pressure 25 bar (360 psi), nominal size 800 and 1400
Duplex Filter Pi 232 Nominal pressure 25 bar (360 psi), nominal size 800 and 1400 1. Features Duplex filter for gear boxes, lubrication and hydraulic systems Modular system Compact design Weight optimized
More informationHigh Pressure Filter Pi 422
High Pressure Filter Pi 422 Nominal pressure 400 bar (5690 psi), nominal size up to 450 optional reverse flow valve 1. Features High performance filters for modern hydraulic systems Modular system Compact
More informationLow Pressure Filter Pi 1500
Low Pressure Filter Pi 500 Nominal pressure /5 bar (40/360 psi), nominal size up to 600 Filter elements according to DIN 4550. Features High performance filters for modern hydraulic systems Provided for
More informationDuplex Filter Pi Features. Nominal pressure 40 bar (580 psi), nominal size up to 300
Duplex Filter Pi 241 Nominal pressure 40 bar (580 psi), nominal size up to 300 1. Features High performance filters for modern hydraulic, lubrication and fuel systems Modular system Compact design Minimal
More informationHigh Pressure Filter Pi 420
High Pressure Filter Pi 4 Nominal pressure 400 bar (5690 psi), nominal size up to 450 optional reverse flow valve 1. Features High performance filters for modern hydraulic systems Modular system Compact
More informationSuction Filter Pi 200
Suction Filter Pi 0 Nominal size up to 90 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular system Compact design Minimal pressure drop through optimal
More informationDuplex Filter Pi Features. Nominal pressure 40 bar (570 psi), nominal size 800 and 1100
Duplex Filter Pi 211 Nominal pressure 40 bar (570 psi), nominal size 800 and 1100 1. Features High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop through
More informationTank top return-line filter Pi 5000
Tank top return-line filter Pi 5000 Nominal size 40 up to 100 according to DIN 24550 1 Features High performance filters for modern hydraulic system Provided for tank top installation Modular system Compact
More informationLow Pressure Filter Pi 200
Low Pressure Filter Pi 0 Nominal pressure 32/63 bar (460/910 psi), nominal size up to 600 1. Features._ High performance filters for modern hydraulic systems Provided for pipe installation Modular system
More informationMAHLE Industrial Filters. Automatic Filters
MAHLE Industrial Filters Automatic Filters Trend-setting systems, modules and components with the highest precision and quality for engines and motor vehicles as well as for industrial applications 33,000
More informationHigh Pressure Filter Pi 410
High Pressure Filter Pi 410 Nominal pressure 315 bar (4480 psi), nominal size -63 1. Features High performance filters for modern hydraulic systems Provided for valve block installation Modular system
More informationOil Solutions. Phone Fax Low Pressure Filter Pi 150
Oil Solutions Phone 0421 336 009 Fax 03 9012 4332 sales@oilsolutionscomau wwwoilsolutionscomau Low Pressure Filter Pi 150 Operating pressure /25 bar, Nominal size up to 630 1 Features Efficient filters
More informationLow Pressure Filter Pi 150
Low Pressure Filter Pi 150 Nominal pressure /25 bar (140/360 psi), nominal size up to 630 1. Features. High performance filters for modern hydraulic systems _ Provided for pipe installation Modular system
More informationMedium Pressure Filter Pi 360
Medium Pressure Filter Pi 360 Nominal pressure /315 bar (2990/44 psi), nominal size up to 450 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular system
More informationLow Pressure Filter Pi 2000
Low Pressure Filter Pi 00 Nominal pressure 32/63 bar (460/900 psi), nominal size up to 400 according DIN 24550 1. Features.. High performance filters for modern hydraulic systems Provided for pipe installation
More informationSuction Filter Pi 160
Suction Filter Pi 160 1. Features High performance filters for modern hydraulic systems _ Provided for tank mounting Compact design Minimal pressure drop through optimal flow design Visual/electrical/electronic
More informationLow Pressure Filter/Suction Filter Pi 270
Low Pressure Filter/Suction Filter Pi 270 Nominal pressure 10 bar (140 psi), up to nominal size 31 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular
More informationOil Mist Separator Unit LGA 1200 FU/FUW
MAHLE Industrialfiltration is now Filtration Group For more information, visit wwwfiltrationgroupcom Oil Mist Separator Unit LGA 1200 FU/FUW Nominal volume flow 1200 m³/h 1 Features High performance oil
More informationBackflushing Filter AutoFilt RF3
Backflushing Filter AutoFilt C 2,5 4 6 8 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL The automatic back-flushing filter AutoFilt is a self-cleaning system for extracting particles from lowviscosity fluids.
More informationProcess Inline Filter PLF1
Process Inline Filter PLF1 10 bar 16 bar Specifications Nominal size: DN 50 DN 150 Q s max: 200 m 3 /h p s max: 16 bar Filtration ratings: 1 90 µm 1. GENERAL Product description Continuous separation of
More informationDuplex Filter Pi 2100
Duplex Filter Pi 0 Nominal pressure 32/63 bar (460/900 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
More informationTank Top Return-Line Filter Pi 530
Tank Top ReturnLine Filter Pi 530 Nominal size 35 and 50 1.Features High performance filters for modern hydraulic systems Provided for tank top installation Modular system Compact design Minimal pressure
More informationMobile Filter Units Pi 8100
Mobile Filter Units Pi 81 Flow rates 27 and 55 l/min 1. Features High performance filters for modern hydraulic systems Mobile bypass filtration for hydraulic and lubricating systems System and container
More informationDuplex Filter Pi Features. Nominal pressure 25/63 bar (360/900 psi), nominal size up to 450
Duplex Filter Pi Nominal pressure 25/63 bar (360/900 psi), nominal size up to 450 1. Features.High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop through
More informationAir breather filter Pi 0201
Air breather filter Pi 0201 1. Features Filter for ventilating and bleeding mobile and stationary hydraulic tanks The air breather filter Pi 0201 with preloaded valves are used for tanks which are under
More informationLow Pressure Filter Pi 230
Low Pressure Filter Pi 230 Nominal pressure 25/40 bar, (360/570 psi), nominal size up to 1400 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular system
More informationSTRONG IN THE WIND GREATER SAFETY AND EFFICIENCY FILTER SYSTEMS FOR WIND POWER SYSTEMS
STRONG IN THE WIND GREATER SAFETY AND EFFICIENCY FILTER SYSTEMS FOR WIND POWER SYSTEMS SYSTEMS PARTNER FOR FILTRATION IN WIND POWER SAFE AND Pitch system Azimuth drive Brake system Gearbox 1 3 4 5 2 6
More informationTank top return-line filter Pi 5000
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Tank top return-line filter Pi 5000 Nominal size 160 up to 1000 according to DIN 24550 1. Features
More informationTank top return-line filter Pi 5000
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Tank top return-line filter Pi 5000 Nominal size 160 up to 00 according to DIN 24550 1. Features
More informationSuction return line filter Pi 550
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Suction return line filter Pi 550 Nominal pressure 10 bar, nominal size 100 1. Features High-performance
More informationLow Pressure Filter/Suction Filter Pi 1941
Low Pressure Filter/Suction Filter Pi 1941 Nominal pressure 10/2 bar (140/360 psi), up to nominal size 63 1. Features High performance filters for modern hydraulic systems Provided for pipe installation
More informationMAHLE Automatic Filter Series R8-30W
MAHLE Automatic Filter Series R8-30W With internal pressure segment cleaning, rated pressure to 150 psi Connection Sizes: ANSI 8" to ANSI 20", welded design 1. Features Powerful, fully automatic filtration
More informationProcess Inline Filter Protective filter PLF2-9HF
Process Inline Filter Protective filter PLF2-9HF Specifications Nominal size: DN 300 - DN 600 Q s max: 3000 m 3 /h p s max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Protective
More informationTank top return-line filter Pi 5000
Tank top returnline filter Pi 5000 Nominal size 160 up to 00 according to DIN 24550 1 Features High performance filters for modern hydraulic systems Provided for tank top installation Modular system Compact
More informationDuplex Filter Pi Features. Nominal pressure 200/250 bar (2850/3560 psi), nominal size up to 450
Duplex Filter Pi 370 Nominal pressure 0/2 bar (28/3560 psi), nominal size up to 0 1. Features High performance filters for modern hydraulic systems _ Modular system Compact design Minimal pressure drop
More informationDuplex Filter Pi 3700
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Duplex Filter Pi 3700 Nominal pressure 0/250/315 bar (2900/36/4570 psi), nominal size up to 400 according
More informationLow Pressure Filter/Suction Filter Pi 1941
Low Pressure Filter/Suction Filter Pi 1941 Nominal pressure 10/2 bar (140/360 psi), up to nominal size 63 1. Features High performance filters for modern hydraulic systems Provided for pipe installation
More informationAutomatic back-flushing filter AutoFilt RF4
Automatic back-flushing filter AutoFilt RF4 RF4-1 RF4-2 Specifications Nominal size: G1 G 1½ Q max: 220 l/min p max: 16 bar Filtration ratings: 30 1000 µm 1. GENERAL Product description Self-cleaning automatic
More informationLow Pressure Filter Spin-on Cartridges HC/OC
Low Pressure Filter Spin-on Cartridges HC/OC Nominal pressure 10/16/ bar (140/230/360 psi), nominal size up to 160 1. Features High performance filters for modern hydraulic systems Modular design Compact
More informationDuplex Filter Pi 4700
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Duplex Filter Pi 4700 Nominal pressure up to 315/350 bar (4570/4980 psi), nominal size 40 up to 400
More informationFNA 008 FNA 016 Operating pressure up to 4 bar / 58 psi Nominal flow rate up to 16 l/min / 4.2 gpm
Off-line Filter Units FNA 008 FNA 016 Operating pressure up to 4 bar / 58 psi Nominal flow rate up to 16 l/min / 4.2 gpm Description Application In the by-pass flow of hydraulic and lubrication systems.
More informationLow Pressure Filter Spin-on Cartridges HC/OC
Low Pressure Filter Spinon Cartridges HC/OC Nominal pressure 10/16/25 bar (140/230/360 psi), nominal size up to 160 1. Features High performance filters for modern hydraulic systems Modular design Compact
More informationFNA 045 Operating pressure up to 7 bar / 101 psi Nominal flow rate up to 45 l/min / 12 gpm
Off-line Filter Unit FNA 045 Operating pressure up to 7 bar / 101 psi Nominal flow rate up to 45 l/min / 12 gpm Description Application In the by-pass flow of hydraulic and lubrication systems. Performance
More informationBackflushing Filter AutoFilt RF4
1. Technical Specifications 1.1 General The automatic backflushing AutoFilt RF4 is a selfcleaning system for extracting particles from low viscosity fluids. Its robust construction and automatic backflushing
More informationAutomatic Back-Flushing Filter for Process Technology AutoFilt RF3.
Automatic Back-Flushing Filter for Process Technology AutoFilt RF3. AutoFilt RF3: So automatic, The Challenge Particle contamination in process water and other operating fluids accelerates the rate of
More informationInline Filters for Process Technology
Inline Filters for Process Technology Inline Filters for Every Process. HYDAC inline filters feature high filtration capacity and easy handling and therefore contribute to safe and economical system operation.
More informationFilter elements for liquid filters Degree of filtration 2 µm up to 500 µm
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Filter elements for liquid filters Degree of filtration 2 µm up to 00 µm up to 1800 Differential
More informationMAHLE Industrial Filters. Dust Filter Equipment
MAHLE Industrial Filters Dust Filter Equipment Pioneering systems, modules and components of the highest precision and quality for engines and vehicles as well as for industrial applications that s what
More informationProcess Inline Filter Medium / High Pressure PFM / PFH
Process Inline Filter Medium / High Pressure PFM / PFH PFx-0 PFx-1 PFx-2 PFx-3 Specifications Connection: G 1 Q S max: 8 m 3 /h p S max: 100 bar Filtration ratings: 1 2000 µm 1. GENERAL Product description
More informationAir Filter Systems Series 7000
Air Filter Systems Series 7000 volume flow 4.5 to m³/min. Features High performance air filter series for tractors, commercial vehicles, construction machines and compressors Flexible mounting possibilities
More informationLow Pressure Filter Pi 1500
Low Pressure Filter Pi 1500 Nominal pressure /25 bar (140/360 psi), nominal size up to 600 Filter elements according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided
More informationProcess screen basket filter PRFS
Process screen basket filter PRFS PRFS- PRFS- PRFS- PRFS- PRFS- PRFS- 130x 250x 520x 650x 1500x 2500x Nominal size: Q s max: p s max: Filtration ratings: Specifications DN 50 DN 700 3600 m³/h 16 bar 25
More informationProcess Multi-Rheo Filter PMRF
Process Multi-Rheo Filter PMRF PMRF-1 PMRF-2 PMRF-3 PMRF-5 PMRF-6 PMRF-7 1. Technical Specifications 1.1 General The filter series PMRF (for duplex filters see PMRFD) Process Multi- Rheo Filter completes
More informationMounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition
More informationProcess filtration PiP
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Process filtration PiP Pleated cartridges 1. Features Filtration Group GmbH pleated cartridges of
More informationWe produce fluid power solutions. Fluid Management. Off-line Filters Off-line Filter Units Oil Service Units Dewatering Systems Filter Elements
We produce fluid power solutions Fluid Management Off-line Filters Off-line Filter Units Oil Service Units Dewatering Systems Filter Elements Products with these icons are specially made for: Industrial
More informationGear Pump KF 0. KF 0 A pump for process engineering. General characteristics. Operation characteristics. Materials
Gear Pumps KF 0 Gear Pump KF 0 KF 0 A pump for process engineering The central element in numerous technical processes is the metering of liquids. PUR components, plasticisers, resins, adhesives, laquers
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationD 162 D 232 D 332 In-line mounting Operating pressure up to 63 bar Nominal flow rate up to 350 l/min
Pressure Filters D 1 D 3 D 33 In-line mounting Operating pressure up to 3 bar Nominal flow rate up to 3 l/min Description Application In the pressure circuits of hydraulic and lubrication systems. Performance
More informationCirculation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
More informationHD 790 HD 990 In-line mounting Operating pressure up to 630 bar Nominal flow rate up to l/min
High Pressure Filters Worldline HD 79 HD 99 In-line mounting Operating pressure up to bar Nominal flow rate up to. l/min Description Application In the high pressure circuits of hydraulic systems. Performance
More informationAutomatic Metal Edge Filter
H. Principle ofoperation Automatic Metal Edge Filter with radial cleaning device Pi casted version G for liquids, pastes and similar media Connection size G, flange DN and DN The MAHLE metal edge filter
More informationHS10S-FA. Water station. Product specification sheet
HS10S-FA Water station Product specification sheet Range of Application Medium Drinking water Inlet pressure Max. 16 bar Outlet pressure 1.5-6.5 bar Installation position Horizontal with filter bowl downwards
More informationGENO -MX 1" - MX DN 100 backwash filter. Intended use. Scope of supply. Function. Structure
Subject to modifications TD2-AM001en_004 Edition June 2017 GENO -MX 1" - MX DN 100 backwash filter Intended use The GENO -MXA backwash filters are suitable for the following sectors: Filtration of drinking
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More informationHD 790 HD 990 In-line mounting Operating pressure up to 630 bar / 9137 psi Nominal flow rate up to l/min / gpm
High Pressure Filters Worldline 4 HD 79 HD 99 In-line mounting Operating pressure up to bar / 97 psi Nominal flow rate up to. l/min / 4. gpm Description Application In the high pressure circuits of hydraulic
More informationOff-line Filters FNS 060. With flow control valve Operating pressure up to 320 bar Nominal flow rate up to 4 l/min e
Off-line Filters FNS 060 With flow control valve Operating pressure up to 320 bar Nominal flow rate up to 4 l/min 80.20-2e Description Application In the high pressure circuits of hydraulic and lubricating
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
More informationAlfa Laval three-screw pump
Alfa Laval three-screw pump Alfa Laval 3S pumps The 3S series is characterised by an innovative design for long service life, even in harsh operating conditions. The thoroughly engineered 3S series is
More informationInline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron
NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500
More informationHydraulic Valves. Experience plus ideas
Hydraulic Valves Experience plus ideas Contents Type/Page Product information Hydraulic valves Function description Non-return valves Pg. 271 Non-return valves Pg. 272-273 RHD RHDI RHV RHZ Function description
More informationOff-line filter / cooler unit FGSL
Fluidcontrol Off-line filter / cooler unit FGSL Coolers are used to stabilise the operating temperature in hydraulic and lubrication systems. This can be implemented particularly cost-efficiently by integrating
More informationES 134 ES 144 Tank top mounting Connection up to SAE 1½ Nominal flow rate up to 130 l/min
Suction Filters ES 134 ES 144 Tank top mounting Connection up to SAE 1½ Nominal flow rate up to 130 l/min Description Application To be installed in the suction line of the pumps of hydraulic systems resp.
More informationFlow Control Valves and Flow Control Valves with reverse flow check DV/DRV
Flow Control Valves and Flow Control Valves with reverse flow check DV/DRV up to 350 bar up to 300 l/min 1. DESCRIPTION 1.1. GENERAL HYDAC flow control valves and flow control valves with reverse flow
More information